blob: c70a04958fc20a7c9d77ea92c4bc9cb6fbb60654 [file] [log] [blame] [edit]
// Copyright 2013 The Flutter Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
#include "path_builder.h"
#include <cmath>
namespace impeller {
PathBuilder::PathBuilder() {
AddContourComponent({});
}
PathBuilder::~PathBuilder() = default;
Path PathBuilder::CopyPath(FillType fill) {
prototype_.fill = fill;
return Path(prototype_);
}
Path PathBuilder::TakePath(FillType fill) {
prototype_.fill = fill;
UpdateBounds();
return Path(prototype_);
}
void PathBuilder::Reserve(size_t point_size, size_t verb_size) {
prototype_.points.reserve(point_size);
prototype_.components.reserve(verb_size);
}
PathBuilder& PathBuilder::MoveTo(Point point, bool relative) {
current_ = relative ? current_ + point : point;
subpath_start_ = current_;
AddContourComponent(current_);
return *this;
}
PathBuilder& PathBuilder::Close() {
LineTo(subpath_start_);
SetContourClosed(true);
AddContourComponent(current_);
return *this;
}
PathBuilder& PathBuilder::LineTo(Point point, bool relative) {
point = relative ? current_ + point : point;
AddLinearComponent(current_, point);
current_ = point;
return *this;
}
PathBuilder& PathBuilder::HorizontalLineTo(Scalar x, bool relative) {
Point endpoint =
relative ? Point{current_.x + x, current_.y} : Point{x, current_.y};
AddLinearComponent(current_, endpoint);
current_ = endpoint;
return *this;
}
PathBuilder& PathBuilder::VerticalLineTo(Scalar y, bool relative) {
Point endpoint =
relative ? Point{current_.x, current_.y + y} : Point{current_.x, y};
AddLinearComponent(current_, endpoint);
current_ = endpoint;
return *this;
}
PathBuilder& PathBuilder::QuadraticCurveTo(Point controlPoint,
Point point,
bool relative) {
point = relative ? current_ + point : point;
controlPoint = relative ? current_ + controlPoint : controlPoint;
AddQuadraticComponent(current_, controlPoint, point);
current_ = point;
return *this;
}
PathBuilder& PathBuilder::SetConvexity(Convexity value) {
prototype_.convexity = value;
return *this;
}
PathBuilder& PathBuilder::CubicCurveTo(Point controlPoint1,
Point controlPoint2,
Point point,
bool relative) {
controlPoint1 = relative ? current_ + controlPoint1 : controlPoint1;
controlPoint2 = relative ? current_ + controlPoint2 : controlPoint2;
point = relative ? current_ + point : point;
AddCubicComponent(current_, controlPoint1, controlPoint2, point);
current_ = point;
return *this;
}
PathBuilder& PathBuilder::AddQuadraticCurve(Point p1, Point cp, Point p2) {
MoveTo(p1);
AddQuadraticComponent(p1, cp, p2);
return *this;
}
PathBuilder& PathBuilder::AddCubicCurve(Point p1,
Point cp1,
Point cp2,
Point p2) {
MoveTo(p1);
AddCubicComponent(p1, cp1, cp2, p2);
return *this;
}
PathBuilder& PathBuilder::AddRect(Rect rect) {
auto origin = rect.GetOrigin();
auto size = rect.GetSize();
auto tl = origin;
auto bl = origin + Point{0.0, size.height};
auto br = origin + size;
auto tr = origin + Point{size.width, 0.0};
MoveTo(tl);
LineTo(tr);
LineTo(br);
LineTo(bl);
Close();
return *this;
}
PathBuilder& PathBuilder::AddCircle(const Point& c, Scalar r) {
return AddOval(Rect::MakeXYWH(c.x - r, c.y - r, 2.0f * r, 2.0f * r));
}
PathBuilder& PathBuilder::AddRoundedRect(Rect rect, Scalar radius) {
return radius <= 0.0 ? AddRect(rect)
: AddRoundedRect(rect, RoundingRadii(radius));
}
PathBuilder& PathBuilder::AddRoundedRect(Rect rect, Size radii) {
return radii.width <= 0 || radii.height <= 0
? AddRect(rect)
: AddRoundedRect(rect, RoundingRadii(radii));
}
PathBuilder& PathBuilder::AddRoundedRect(Rect rect, RoundingRadii radii) {
if (radii.AreAllZero()) {
return AddRect(rect);
}
auto rect_origin = rect.GetOrigin();
auto rect_size = rect.GetSize();
current_ = rect_origin + Point{radii.top_left.x, 0.0};
MoveTo({rect_origin.x + radii.top_left.x, rect_origin.y});
//----------------------------------------------------------------------------
// Top line.
//
AddLinearComponent(
{rect_origin.x + radii.top_left.x, rect_origin.y},
{rect_origin.x + rect_size.width - radii.top_right.x, rect_origin.y});
//----------------------------------------------------------------------------
// Top right arc.
//
AddRoundedRectTopRight(rect, radii);
//----------------------------------------------------------------------------
// Right line.
//
AddLinearComponent(
{rect_origin.x + rect_size.width, rect_origin.y + radii.top_right.y},
{rect_origin.x + rect_size.width,
rect_origin.y + rect_size.height - radii.bottom_right.y});
//----------------------------------------------------------------------------
// Bottom right arc.
//
AddRoundedRectBottomRight(rect, radii);
//----------------------------------------------------------------------------
// Bottom line.
//
AddLinearComponent(
{rect_origin.x + rect_size.width - radii.bottom_right.x,
rect_origin.y + rect_size.height},
{rect_origin.x + radii.bottom_left.x, rect_origin.y + rect_size.height});
//----------------------------------------------------------------------------
// Bottom left arc.
//
AddRoundedRectBottomLeft(rect, radii);
//----------------------------------------------------------------------------
// Left line.
//
AddLinearComponent(
{rect_origin.x, rect_origin.y + rect_size.height - radii.bottom_left.y},
{rect_origin.x, rect_origin.y + radii.top_left.y});
//----------------------------------------------------------------------------
// Top left arc.
//
AddRoundedRectTopLeft(rect, radii);
Close();
return *this;
}
PathBuilder& PathBuilder::AddRoundedRectTopLeft(Rect rect,
RoundingRadii radii) {
const auto magic_top_left = radii.top_left * kArcApproximationMagic;
const auto corner = rect.GetOrigin();
AddCubicComponent({corner.x, corner.y + radii.top_left.y},
{corner.x, corner.y + radii.top_left.y - magic_top_left.y},
{corner.x + radii.top_left.x - magic_top_left.x, corner.y},
{corner.x + radii.top_left.x, corner.y});
return *this;
}
PathBuilder& PathBuilder::AddRoundedRectTopRight(Rect rect,
RoundingRadii radii) {
const auto magic_top_right = radii.top_right * kArcApproximationMagic;
const auto corner = rect.GetOrigin() + Point{rect.GetWidth(), 0};
AddCubicComponent(
{corner.x - radii.top_right.x, corner.y},
{corner.x - radii.top_right.x + magic_top_right.x, corner.y},
{corner.x, corner.y + radii.top_right.y - magic_top_right.y},
{corner.x, corner.y + radii.top_right.y});
return *this;
}
PathBuilder& PathBuilder::AddRoundedRectBottomRight(Rect rect,
RoundingRadii radii) {
const auto magic_bottom_right = radii.bottom_right * kArcApproximationMagic;
const auto corner = rect.GetOrigin() + rect.GetSize();
AddCubicComponent(
{corner.x, corner.y - radii.bottom_right.y},
{corner.x, corner.y - radii.bottom_right.y + magic_bottom_right.y},
{corner.x - radii.bottom_right.x + magic_bottom_right.x, corner.y},
{corner.x - radii.bottom_right.x, corner.y});
return *this;
}
PathBuilder& PathBuilder::AddRoundedRectBottomLeft(Rect rect,
RoundingRadii radii) {
const auto magic_bottom_left = radii.bottom_left * kArcApproximationMagic;
const auto corner = rect.GetOrigin() + Point{0, rect.GetHeight()};
AddCubicComponent(
{corner.x + radii.bottom_left.x, corner.y},
{corner.x + radii.bottom_left.x - magic_bottom_left.x, corner.y},
{corner.x, corner.y - radii.bottom_left.y + magic_bottom_left.y},
{corner.x, corner.y - radii.bottom_left.y});
return *this;
}
void PathBuilder::AddContourComponent(const Point& destination,
bool is_closed) {
auto& components = prototype_.components;
auto& contours = prototype_.contours;
if (components.size() > 0 &&
components.back().type == Path::ComponentType::kContour) {
// Never insert contiguous contours.
contours.back() = ContourComponent(destination, is_closed);
} else {
contours.emplace_back(ContourComponent(destination, is_closed));
components.emplace_back(Path::ComponentType::kContour, contours.size() - 1);
}
prototype_.bounds.reset();
}
void PathBuilder::AddLinearComponent(const Point& p1, const Point& p2) {
auto& points = prototype_.points;
auto index = points.size();
points.emplace_back(p1);
points.emplace_back(p2);
prototype_.components.emplace_back(Path::ComponentType::kLinear, index);
prototype_.bounds.reset();
}
void PathBuilder::AddQuadraticComponent(const Point& p1,
const Point& cp,
const Point& p2) {
auto& points = prototype_.points;
auto index = points.size();
points.emplace_back(p1);
points.emplace_back(cp);
points.emplace_back(p2);
prototype_.components.emplace_back(Path::ComponentType::kQuadratic, index);
prototype_.bounds.reset();
}
void PathBuilder::AddCubicComponent(const Point& p1,
const Point& cp1,
const Point& cp2,
const Point& p2) {
auto& points = prototype_.points;
auto index = points.size();
points.emplace_back(p1);
points.emplace_back(cp1);
points.emplace_back(cp2);
points.emplace_back(p2);
prototype_.components.emplace_back(Path::ComponentType::kCubic, index);
prototype_.bounds.reset();
}
void PathBuilder::SetContourClosed(bool is_closed) {
prototype_.contours.back().is_closed = is_closed;
}
PathBuilder& PathBuilder::AddArc(const Rect& oval_bounds,
Radians start,
Radians sweep,
bool use_center) {
if (sweep.radians < 0) {
start.radians += sweep.radians;
sweep.radians *= -1;
}
sweep.radians = std::min(k2Pi, sweep.radians);
start.radians = std::fmod(start.radians, k2Pi);
const Point center = oval_bounds.GetCenter();
const Point radius = center - oval_bounds.GetOrigin();
Vector2 p1_unit(std::cos(start.radians), std::sin(start.radians));
if (use_center) {
MoveTo(center);
LineTo(center + p1_unit * radius);
} else {
MoveTo(center + p1_unit * radius);
}
while (sweep.radians > 0) {
Vector2 p2_unit;
Scalar quadrant_angle;
if (sweep.radians < kPiOver2) {
quadrant_angle = sweep.radians;
p2_unit = Vector2(std::cos(start.radians + quadrant_angle),
std::sin(start.radians + quadrant_angle));
} else {
quadrant_angle = kPiOver2;
p2_unit = Vector2(-p1_unit.y, p1_unit.x);
}
Vector2 arc_cp_lengths =
(quadrant_angle / kPiOver2) * kArcApproximationMagic * radius;
Point p1 = center + p1_unit * radius;
Point p2 = center + p2_unit * radius;
Point cp1 = p1 + Vector2(-p1_unit.y, p1_unit.x) * arc_cp_lengths;
Point cp2 = p2 + Vector2(p2_unit.y, -p2_unit.x) * arc_cp_lengths;
AddCubicComponent(p1, cp1, cp2, p2);
current_ = p2;
start.radians += quadrant_angle;
sweep.radians -= quadrant_angle;
p1_unit = p2_unit;
}
if (use_center) {
Close();
}
return *this;
}
PathBuilder& PathBuilder::AddOval(const Rect& container) {
const Point c = container.GetCenter();
const Point r = c - container.GetOrigin();
const Point m = r * kArcApproximationMagic;
MoveTo({c.x, c.y - r.y});
//----------------------------------------------------------------------------
// Top right arc.
//
AddCubicComponent({c.x, c.y - r.y}, // p1
{c.x + m.x, c.y - r.y}, // cp1
{c.x + r.x, c.y - m.y}, // cp2
{c.x + r.x, c.y} // p2
);
//----------------------------------------------------------------------------
// Bottom right arc.
//
AddCubicComponent({c.x + r.x, c.y}, // p1
{c.x + r.x, c.y + m.y}, // cp1
{c.x + m.x, c.y + r.y}, // cp2
{c.x, c.y + r.y} // p2
);
//----------------------------------------------------------------------------
// Bottom left arc.
//
AddCubicComponent({c.x, c.y + r.y}, // p1
{c.x - m.x, c.y + r.y}, // cp1
{c.x - r.x, c.y + m.y}, // cp2
{c.x - r.x, c.y} // p2
);
//----------------------------------------------------------------------------
// Top left arc.
//
AddCubicComponent({c.x - r.x, c.y}, // p1
{c.x - r.x, c.y - m.y}, // cp1
{c.x - m.x, c.y - r.y}, // cp2
{c.x, c.y - r.y} // p2
);
Close();
return *this;
}
PathBuilder& PathBuilder::AddLine(const Point& p1, const Point& p2) {
MoveTo(p1);
AddLinearComponent(p1, p2);
return *this;
}
PathBuilder& PathBuilder::AddPath(const Path& path) {
auto linear = [&](size_t index, const LinearPathComponent& l) {
AddLinearComponent(l.p1, l.p2);
};
auto quadratic = [&](size_t index, const QuadraticPathComponent& q) {
AddQuadraticComponent(q.p1, q.cp, q.p2);
};
auto cubic = [&](size_t index, const CubicPathComponent& c) {
AddCubicComponent(c.p1, c.cp1, c.cp2, c.p2);
};
auto move = [&](size_t index, const ContourComponent& m) {
AddContourComponent(m.destination);
};
path.EnumerateComponents(linear, quadratic, cubic, move);
return *this;
}
PathBuilder& PathBuilder::Shift(Point offset) {
for (auto& point : prototype_.points) {
point += offset;
}
for (auto& contour : prototype_.contours) {
contour.destination += offset;
}
prototype_.bounds.reset();
return *this;
}
PathBuilder& PathBuilder::SetBounds(Rect bounds) {
prototype_.bounds = bounds;
return *this;
}
void PathBuilder::UpdateBounds() {
if (!prototype_.bounds.has_value()) {
auto min_max = GetMinMaxCoveragePoints();
if (!min_max.has_value()) {
prototype_.bounds.reset();
return;
}
auto min = min_max->first;
auto max = min_max->second;
const auto difference = max - min;
prototype_.bounds =
Rect::MakeXYWH(min.x, min.y, difference.x, difference.y);
}
}
std::optional<std::pair<Point, Point>> PathBuilder::GetMinMaxCoveragePoints()
const {
auto& points = prototype_.points;
if (points.empty()) {
return std::nullopt;
}
std::optional<Point> min, max;
auto clamp = [&min, &max](const Point& point) {
if (min.has_value()) {
min = min->Min(point);
} else {
min = point;
}
if (max.has_value()) {
max = max->Max(point);
} else {
max = point;
}
};
for (const auto& component : prototype_.components) {
switch (component.type) {
case Path::ComponentType::kLinear: {
auto* linear = reinterpret_cast<const LinearPathComponent*>(
&points[component.index]);
clamp(linear->p1);
clamp(linear->p2);
break;
}
case Path::ComponentType::kQuadratic:
for (const auto& extrema :
reinterpret_cast<const QuadraticPathComponent*>(
&points[component.index])
->Extrema()) {
clamp(extrema);
}
break;
case Path::ComponentType::kCubic:
for (const auto& extrema : reinterpret_cast<const CubicPathComponent*>(
&points[component.index])
->Extrema()) {
clamp(extrema);
}
break;
case Path::ComponentType::kContour:
break;
}
}
if (!min.has_value() || !max.has_value()) {
return std::nullopt;
}
return std::make_pair(min.value(), max.value());
}
} // namespace impeller