blob: 0db58dc7772b4509dd514964d6adeb0d5d2434f8 [file] [log] [blame]
# modules.cfg
#
# Copyright (C) 2005-2022 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
#
#
# In case you compile the FreeType library with GNU make or makepp, this
# file controls which components are built into the library. Otherwise,
# please read this file for information on the various modules and its
# dependencies, then follow the instructions in the file `docs/INSTALL.ANY'.
#
# To deactivate a module, simply comment out the corresponding line. To
# activate a module, remove the comment character.
#
# Note that many modules and components are further controlled with macros
# in the file `include/freetype/config/ftoption.h'.
####
#### font modules -- at least one is required
####
#### The order given here (from top to down) is the order used for testing
#### font formats in the compiled library.
####
# TrueType font driver.
#
# This driver needs the `sfnt' module.
FONT_MODULES += truetype
# PostScript Type 1 font driver.
#
# This driver needs the `psaux', `pshinter', and `psnames' modules.
FONT_MODULES += type1
# CFF/OpenType font driver.
#
# This driver needs the `sfnt', `psaux', `pshinter', and `psnames' modules.
FONT_MODULES += cff
# Type 1 CID-keyed font driver.
#
# This driver needs the `psaux', `pshinter', and `psnames' modules.
FONT_MODULES += cid
# PFR/TrueDoc font driver. See optional extension ftpfr.c below also.
FONT_MODULES += pfr
# PostScript Type 42 font driver.
#
# This driver needs the `truetype' and `psaux' modules.
FONT_MODULES += type42
# Windows FONT/FNT font driver. See optional extension ftwinfnt.c below
# also.
FONT_MODULES += winfonts
# PCF font driver. If debugging and tracing is enabled, needs `ftbitmap.c'.
FONT_MODULES += pcf
# BDF font driver. See optional extension ftbdf.c below also.
FONT_MODULES += bdf
# SFNT files support. If used without `truetype' or `cff', it supports
# bitmap-only fonts within an SFNT wrapper.
#
# This driver needs the `psnames' module.
FONT_MODULES += sfnt
####
#### hinting modules
####
# FreeType's auto hinter.
HINTING_MODULES += autofit
# PostScript hinter.
HINTING_MODULES += pshinter
# The TrueType hinting engine doesn't have a module of its own but is
# controlled in file include/freetype/config/ftoption.h
# (TT_CONFIG_OPTION_BYTECODE_INTERPRETER and friends).
####
#### raster modules -- at least one is required for vector font formats
####
# Anti-aliasing rasterizer.
RASTER_MODULES += smooth
# Monochrome rasterizer.
RASTER_MODULES += raster
# Signed distance field rasterizer.
RASTER_MODULES += sdf
####
#### auxiliary modules
####
# FreeType's cache sub-system (quite stable but still in beta -- this means
# that its public API is subject to change if necessary). See
# include/freetype/ftcache.h. Needs `ftglyph.c'.
AUX_MODULES += cache
# TrueType GX/AAT table validation. Needs `ftgxval.c' below.
#
# AUX_MODULES += gxvalid
# Support for streams compressed with gzip (files with suffix .gz).
#
# See include/freetype/ftgzip.h for the API.
AUX_MODULES += gzip
# Support for streams compressed with LZW (files with suffix .Z).
#
# See include/freetype/ftlzw.h for the API.
AUX_MODULES += lzw
# Support for streams compressed with bzip2 (files with suffix .bz2).
#
# See include/freetype/ftbzip2.h for the API.
AUX_MODULES += bzip2
# OpenType table validation. Needs `ftotval.c' below.
#
# AUX_MODULES += otvalid
# Auxiliary PostScript driver component to share common code.
#
# This module depends on `psnames'.
AUX_MODULES += psaux
# Support for PostScript glyph names.
#
# This module can be controlled in ftconfig.h
# (FT_CONFIG_OPTION_POSTSCRIPT_NAMES).
AUX_MODULES += psnames
####
#### base module extensions
####
# Exact bounding box calculation.
#
# See include/freetype/ftbbox.h for the API.
BASE_EXTENSIONS += ftbbox.c
# Access BDF-specific strings. Needs BDF font driver.
#
# See include/freetype/ftbdf.h for the API.
BASE_EXTENSIONS += ftbdf.c
# Utility functions for converting 1bpp, 2bpp, 4bpp, and 8bpp bitmaps into
# 8bpp format, and for emboldening of bitmap glyphs.
#
# See include/freetype/ftbitmap.h for the API.
BASE_EXTENSIONS += ftbitmap.c
# Access CID font information.
#
# See include/freetype/ftcid.h for the API.
BASE_EXTENSIONS += ftcid.c
# Access FSType information. Needs `fttype1.c'.
#
# See include/freetype/freetype.h for the API.
BASE_EXTENSIONS += ftfstype.c
# Support for GASP table queries.
#
# See include/freetype/ftgasp.h for the API.
BASE_EXTENSIONS += ftgasp.c
# Convenience functions to handle glyphs. Needs `ftbitmap.c'.
#
# See include/freetype/ftglyph.h for the API.
BASE_EXTENSIONS += ftglyph.c
# Interface for gxvalid module.
#
# See include/freetype/ftgxval.h for the API.
BASE_EXTENSIONS += ftgxval.c
# Multiple Master font interface.
#
# See include/freetype/ftmm.h for the API.
BASE_EXTENSIONS += ftmm.c
# Interface for otvalid module.
#
# See include/freetype/ftotval.h for the API.
BASE_EXTENSIONS += ftotval.c
# Support for FT_Face_CheckTrueTypePatents.
#
# See include/freetype/freetype.h for the API.
BASE_EXTENSIONS += ftpatent.c
# Interface for accessing PFR-specific data. Needs PFR font driver.
#
# See include/freetype/ftpfr.h for the API.
BASE_EXTENSIONS += ftpfr.c
# Path stroker. Needs `ftglyph.c'.
#
# See include/freetype/ftstroke.h for the API.
BASE_EXTENSIONS += ftstroke.c
# Support for synthetic emboldening and slanting of fonts. Needs
# `ftbitmap.c'.
#
# See include/freetype/ftsynth.h for the API.
BASE_EXTENSIONS += ftsynth.c
# Interface to access data specific to PostScript Type 1 and Type 2 (CFF)
# fonts.
#
# See include/freetype/t1tables.h for the API.
BASE_EXTENSIONS += fttype1.c
# Interface for accessing data specific to Windows FNT files. Needs winfnt
# driver.
#
# See include/freetype/ftwinfnt.h for the API.
BASE_EXTENSIONS += ftwinfnt.c
####
#### The components `ftsystem.c' (for memory allocation and stream I/O
#### management) and `ftdebug.c' (for emitting debug messages to the user)
#### are controlled with the following variables.
####
#### ftsystem.c: $(FTSYS_SRC)
#### ftdebug.c: $(FTDEBUG_SRC)
####
#### Please refer to docs/CUSTOMIZE for details.
####
# EOF