include/libimobiledevice/mobilebackup2.h - third_party/libimobiledevice - Git at Google

 /**
  * @file libimobiledevice/mobilebackup2.h
  * @brief Backup and restore of all device data (mobilebackup2, iOS4+ only)
  * \internal
  *
  * Copyright (c) 2010-2019 Nikias Bassen, All Rights Reserved.
  * Copyright (c) 2011-2014 Martin Szulecki, All Rights Reserved.
  *
  * This library is free software; you can redistribute it and/or
  * modify it under the terms of the GNU Lesser General Public
  * License as published by the Free Software Foundation; either
  * version 2.1 of the License, or (at your option) any later version.
  *
  * This library is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * Lesser General Public License for more details.
  *
  * You should have received a copy of the GNU Lesser General Public
  * License along with this library; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
  */

 #ifndef IMOBILEBACKUP2_H
 #define IMOBILEBACKUP2_H

 #ifdef __cplusplus
 extern "C" {
 #endif

 #include <libimobiledevice/libimobiledevice.h>
 #include <libimobiledevice/lockdown.h>

 #define MOBILEBACKUP2_SERVICE_NAME "com.apple.mobilebackup2"

 /** Error Codes */
 typedef enum {
 	MOBILEBACKUP2_E_SUCCESS           =  0,
 	MOBILEBACKUP2_E_INVALID_ARG       = -1,
 	MOBILEBACKUP2_E_PLIST_ERROR       = -2,
 	MOBILEBACKUP2_E_MUX_ERROR         = -3,
 	MOBILEBACKUP2_E_SSL_ERROR         = -4,
 	MOBILEBACKUP2_E_RECEIVE_TIMEOUT   = -5,
 	MOBILEBACKUP2_E_BAD_VERSION       = -6,
 	MOBILEBACKUP2_E_REPLY_NOT_OK      = -7,
 	MOBILEBACKUP2_E_NO_COMMON_VERSION = -8,
 	MOBILEBACKUP2_E_UNKNOWN_ERROR     = -256
 } mobilebackup2_error_t;

 typedef struct mobilebackup2_client_private mobilebackup2_client_private;
 typedef mobilebackup2_client_private *mobilebackup2_client_t; /**< The client handle. */


 /**
  * Connects to the mobilebackup2 service on the specified device.
  *
  * @param device The device to connect to.
  * @param service The service descriptor returned by lockdownd_start_service.
  * @param client Pointer that will be set to a newly allocated
  *     mobilebackup2_client_t upon successful return.
  *
  * @return MOBILEBACKUP2_E_SUCCESS on success, MOBILEBACKUP2_E_INVALID ARG
  *     if one or more parameter is invalid, or MOBILEBACKUP2_E_BAD_VERSION
  *     if the mobilebackup2 version on the device is newer.
  */
 mobilebackup2_error_t mobilebackup2_client_new(idevice_t device, lockdownd_service_descriptor_t service, mobilebackup2_client_t * client);

 /**
  * Starts a new mobilebackup2 service on the specified device and connects to it.
  *
  * @param device The device to connect to.
  * @param client Pointer that will point to a newly allocated
  *     mobilebackup2_client_t upon successful return. Must be freed using
  *     mobilebackup2_client_free() after use.
  * @param label The label to use for communication. Usually the program name.
  *  Pass NULL to disable sending the label in requests to lockdownd.
  *
  * @return MOBILEBACKUP2_E_SUCCESS on success, or an MOBILEBACKUP2_E_* error
  *     code otherwise.
  */
 mobilebackup2_error_t mobilebackup2_client_start_service(idevice_t device, mobilebackup2_client_t* client, const char* label);

 /**
  * Disconnects a mobilebackup2 client from the device and frees up the
  * mobilebackup2 client data.
  *
  * @param client The mobilebackup2 client to disconnect and free.
  *
  * @return MOBILEBACKUP2_E_SUCCESS on success, or MOBILEBACKUP2_E_INVALID_ARG
  *     if client is NULL.
  */
 mobilebackup2_error_t mobilebackup2_client_free(mobilebackup2_client_t client);


 /**
  * Sends a backup message plist.
  *
  * @param client The connected MobileBackup client to use.
  * @param message The message to send. This will be inserted into the request
  *     plist as value for MessageName. If this parameter is NULL,
  *     the plist passed in the options parameter will be sent directly.
  * @param options Additional options as PLIST_DICT to add to the request.
  *     The MessageName key with the value passed in the message parameter
  *     will be inserted into this plist before sending it. This parameter
  *     can be NULL if message is not NULL.
  */
 mobilebackup2_error_t mobilebackup2_send_message(mobilebackup2_client_t client, const char *message, plist_t options);

 /**
  * Receives a DL* message plist from the device.
  * This function is a wrapper around device_link_service_receive_message.
  *
  * @param client The connected MobileBackup client to use.
  * @param msg_plist Pointer to a plist that will be set to the contents of the
  *    message plist upon successful return.
  * @param dlmessage A pointer that will be set to a newly allocated char*
  *     containing the DL* string from the given plist. It is up to the caller
  *     to free the allocated memory. If this parameter is NULL
  *     it will be ignored.
  *
  * @return MOBILEBACKUP2_E_SUCCESS if a DL* message was received,
  *    MOBILEBACKUP2_E_INVALID_ARG if client or message is invalid,
  *    MOBILEBACKUP2_E_PLIST_ERROR if the received plist is invalid
  *    or is not a DL* message plist, or MOBILEBACKUP2_E_MUX_ERROR if
  *    receiving from the device failed.
  */
 mobilebackup2_error_t mobilebackup2_receive_message(mobilebackup2_client_t client, plist_t *msg_plist, char **dlmessage);

 /**
  * Send binary data to the device.
  *
  * @note This function returns MOBILEBACKUP2_E_SUCCESS even if less than the
  *     requested length has been sent. The fourth parameter is required and
  *     must be checked to ensure if the whole data has been sent.
  *
  * @param client The MobileBackup client to send to.
  * @param data Pointer to the data to send
  * @param length Number of bytes to send
  * @param bytes Number of bytes actually sent
  *
  * @return MOBILEBACKUP2_E_SUCCESS if any data was successfully sent,
  *     MOBILEBACKUP2_E_INVALID_ARG if one of the parameters is invalid,
  *     or MOBILEBACKUP2_E_MUX_ERROR if sending of the data failed.
  */
 mobilebackup2_error_t mobilebackup2_send_raw(mobilebackup2_client_t client, const char *data, uint32_t length, uint32_t *bytes);

 /**
  * Receive binary from the device.
  *
  * @note This function returns MOBILEBACKUP2_E_SUCCESS even if no data
  *     has been received (unless a communication error occurred).
  *     The fourth parameter is required and must be checked to know how
  *     many bytes were actually received.
  *
  * @param client The MobileBackup client to receive from.
  * @param data Pointer to a buffer that will be filled with the received data.
  * @param length Number of bytes to receive. The data buffer needs to be large
  *     enough to store this amount of data.
  * @paran bytes Number of bytes actually received.
  *
  * @return MOBILEBACKUP2_E_SUCCESS if any or no data was received,
  *     MOBILEBACKUP2_E_INVALID_ARG if one of the parameters is invalid,
  *     or MOBILEBACKUP2_E_MUX_ERROR if receiving the data failed.
  */
 mobilebackup2_error_t mobilebackup2_receive_raw(mobilebackup2_client_t client, char *data, uint32_t length, uint32_t *bytes);

 /**
  * Performs the mobilebackup2 protocol version exchange.
  *
  * @param client The MobileBackup client to use.
  * @param local_versions An array of supported versions to send to the remote.
  * @param count The number of items in local_versions.
  * @param remote_version Holds the protocol version of the remote on success.
  *
  * @return MOBILEBACKUP2_E_SUCCESS on success, or a MOBILEBACKUP2_E_* error
  *     code otherwise.
  */
 mobilebackup2_error_t mobilebackup2_version_exchange(mobilebackup2_client_t client, double local_versions[], char count, double *remote_version);

 /**
  * Send a request to the connected mobilebackup2 service.
  *
  * @param client
  * @param request The request to send to the backup service.
  *     Currently, this is one of "Backup", "Restore", "Info", or "List".
  * @param target_identifier UDID of the target device.
  * @param source_identifier UDID of backup data?
  * @param options Additional options in a plist of type PLIST_DICT.
  *
  * @return MOBILEBACKUP2_E_SUCCESS if the request was successfully sent,
  *     or a MOBILEBACKUP2_E_* error value otherwise.
  */
 mobilebackup2_error_t mobilebackup2_send_request(mobilebackup2_client_t client, const char *request, const char *target_identifier, const char *source_identifier, plist_t options);

 /**
  * Sends a DLMessageStatusResponse to the device.
  *
  * @param client The MobileBackup client to use.
  * @param status_code The status code to send.
  * @param status1 A status message to send. Can be NULL if not required.
  * @param status2 An additional status plist to attach to the response.
  *     Can be NULL if not required.
  *
  * @return MOBILEBACKUP2_E_SUCCESS on success, MOBILEBACKUP2_E_INVALID_ARG
  *     if client is invalid, or another MOBILEBACKUP2_E_* otherwise.
  */
 mobilebackup2_error_t mobilebackup2_send_status_response(mobilebackup2_client_t client, int status_code, const char *status1, plist_t status2);

 #ifdef __cplusplus
 }
 #endif

 #endif
	/**
	* @file libimobiledevice/mobilebackup2.h
	* @brief Backup and restore of all device data (mobilebackup2, iOS4+ only)
	* \internal
	*
	* Copyright (c) 2010-2019 Nikias Bassen, All Rights Reserved.
	* Copyright (c) 2011-2014 Martin Szulecki, All Rights Reserved.
	*
	* This library is free software; you can redistribute it and/or
	* modify it under the terms of the GNU Lesser General Public
	* License as published by the Free Software Foundation; either
	* version 2.1 of the License, or (at your option) any later version.
	*
	* This library is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	* Lesser General Public License for more details.
	*
	* You should have received a copy of the GNU Lesser General Public
	* License along with this library; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
	*/

	#ifndef IMOBILEBACKUP2_H
	#define IMOBILEBACKUP2_H

	#ifdef __cplusplus
	extern "C" {
	#endif

	#include <libimobiledevice/libimobiledevice.h>
	#include <libimobiledevice/lockdown.h>

	#define MOBILEBACKUP2_SERVICE_NAME "com.apple.mobilebackup2"

	/** Error Codes */
	typedef enum {
	MOBILEBACKUP2_E_SUCCESS = 0,
	MOBILEBACKUP2_E_INVALID_ARG = -1,
	MOBILEBACKUP2_E_PLIST_ERROR = -2,
	MOBILEBACKUP2_E_MUX_ERROR = -3,
	MOBILEBACKUP2_E_SSL_ERROR = -4,
	MOBILEBACKUP2_E_RECEIVE_TIMEOUT = -5,
	MOBILEBACKUP2_E_BAD_VERSION = -6,
	MOBILEBACKUP2_E_REPLY_NOT_OK = -7,
	MOBILEBACKUP2_E_NO_COMMON_VERSION = -8,
	MOBILEBACKUP2_E_UNKNOWN_ERROR = -256
	} mobilebackup2_error_t;

	typedef struct mobilebackup2_client_private mobilebackup2_client_private;
	typedef mobilebackup2_client_private mobilebackup2_client_t; /< The client handle. /


	/**
	* Connects to the mobilebackup2 service on the specified device.
	*
	* @param device The device to connect to.
	* @param service The service descriptor returned by lockdownd_start_service.
	* @param client Pointer that will be set to a newly allocated
	* mobilebackup2_client_t upon successful return.
	*
	* @return MOBILEBACKUP2_E_SUCCESS on success, MOBILEBACKUP2_E_INVALID ARG
	* if one or more parameter is invalid, or MOBILEBACKUP2_E_BAD_VERSION
	* if the mobilebackup2 version on the device is newer.
	*/
	mobilebackup2_error_t mobilebackup2_client_new(idevice_t device, lockdownd_service_descriptor_t service, mobilebackup2_client_t * client);

	/**
	* Starts a new mobilebackup2 service on the specified device and connects to it.
	*
	* @param device The device to connect to.
	* @param client Pointer that will point to a newly allocated
	* mobilebackup2_client_t upon successful return. Must be freed using
	* mobilebackup2_client_free() after use.
	* @param label The label to use for communication. Usually the program name.
	* Pass NULL to disable sending the label in requests to lockdownd.
	*
	* @return MOBILEBACKUP2_E_SUCCESS on success, or an MOBILEBACKUP2_E_* error
	* code otherwise.
	*/
	mobilebackup2_error_t mobilebackup2_client_start_service(idevice_t device, mobilebackup2_client_t* client, const char* label);

	/**
	* Disconnects a mobilebackup2 client from the device and frees up the
	* mobilebackup2 client data.
	*
	* @param client The mobilebackup2 client to disconnect and free.
	*
	* @return MOBILEBACKUP2_E_SUCCESS on success, or MOBILEBACKUP2_E_INVALID_ARG
	* if client is NULL.
	*/
	mobilebackup2_error_t mobilebackup2_client_free(mobilebackup2_client_t client);


	/**
	* Sends a backup message plist.
	*
	* @param client The connected MobileBackup client to use.
	* @param message The message to send. This will be inserted into the request
	* plist as value for MessageName. If this parameter is NULL,
	* the plist passed in the options parameter will be sent directly.
	* @param options Additional options as PLIST_DICT to add to the request.
	* The MessageName key with the value passed in the message parameter
	* will be inserted into this plist before sending it. This parameter
	* can be NULL if message is not NULL.
	*/
	mobilebackup2_error_t mobilebackup2_send_message(mobilebackup2_client_t client, const char *message, plist_t options);

	/**
	* Receives a DL* message plist from the device.
	* This function is a wrapper around device_link_service_receive_message.
	*
	* @param client The connected MobileBackup client to use.
	* @param msg_plist Pointer to a plist that will be set to the contents of the
	* message plist upon successful return.
	* @param dlmessage A pointer that will be set to a newly allocated char*
	* containing the DL* string from the given plist. It is up to the caller
	* to free the allocated memory. If this parameter is NULL
	* it will be ignored.
	*
	* @return MOBILEBACKUP2_E_SUCCESS if a DL* message was received,
	* MOBILEBACKUP2_E_INVALID_ARG if client or message is invalid,
	* MOBILEBACKUP2_E_PLIST_ERROR if the received plist is invalid
	* or is not a DL* message plist, or MOBILEBACKUP2_E_MUX_ERROR if
	* receiving from the device failed.
	*/
	mobilebackup2_error_t mobilebackup2_receive_message(mobilebackup2_client_t client, plist_t msg_plist, char *dlmessage);

	/**
	* Send binary data to the device.
	*
	* @note This function returns MOBILEBACKUP2_E_SUCCESS even if less than the
	* requested length has been sent. The fourth parameter is required and
	* must be checked to ensure if the whole data has been sent.
	*
	* @param client The MobileBackup client to send to.
	* @param data Pointer to the data to send
	* @param length Number of bytes to send
	* @param bytes Number of bytes actually sent
	*
	* @return MOBILEBACKUP2_E_SUCCESS if any data was successfully sent,
	* MOBILEBACKUP2_E_INVALID_ARG if one of the parameters is invalid,
	* or MOBILEBACKUP2_E_MUX_ERROR if sending of the data failed.
	*/
	mobilebackup2_error_t mobilebackup2_send_raw(mobilebackup2_client_t client, const char data, uint32_t length, uint32_t bytes);

	/**
	* Receive binary from the device.
	*
	* @note This function returns MOBILEBACKUP2_E_SUCCESS even if no data
	* has been received (unless a communication error occurred).
	* The fourth parameter is required and must be checked to know how
	* many bytes were actually received.
	*
	* @param client The MobileBackup client to receive from.
	* @param data Pointer to a buffer that will be filled with the received data.
	* @param length Number of bytes to receive. The data buffer needs to be large
	* enough to store this amount of data.
	* @paran bytes Number of bytes actually received.
	*
	* @return MOBILEBACKUP2_E_SUCCESS if any or no data was received,
	* MOBILEBACKUP2_E_INVALID_ARG if one of the parameters is invalid,
	* or MOBILEBACKUP2_E_MUX_ERROR if receiving the data failed.
	*/
	mobilebackup2_error_t mobilebackup2_receive_raw(mobilebackup2_client_t client, char data, uint32_t length, uint32_t bytes);

	/**
	* Performs the mobilebackup2 protocol version exchange.
	*
	* @param client The MobileBackup client to use.
	* @param local_versions An array of supported versions to send to the remote.
	* @param count The number of items in local_versions.
	* @param remote_version Holds the protocol version of the remote on success.
	*
	* @return MOBILEBACKUP2_E_SUCCESS on success, or a MOBILEBACKUP2_E_* error
	* code otherwise.
	*/
	mobilebackup2_error_t mobilebackup2_version_exchange(mobilebackup2_client_t client, double local_versions[], char count, double *remote_version);

	/**
	* Send a request to the connected mobilebackup2 service.
	*
	* @param client
	* @param request The request to send to the backup service.
	* Currently, this is one of "Backup", "Restore", "Info", or "List".
	* @param target_identifier UDID of the target device.
	* @param source_identifier UDID of backup data?
	* @param options Additional options in a plist of type PLIST_DICT.
	*
	* @return MOBILEBACKUP2_E_SUCCESS if the request was successfully sent,
	* or a MOBILEBACKUP2_E_* error value otherwise.
	*/
	mobilebackup2_error_t mobilebackup2_send_request(mobilebackup2_client_t client, const char request, const char target_identifier, const char *source_identifier, plist_t options);

	/**
	* Sends a DLMessageStatusResponse to the device.
	*
	* @param client The MobileBackup client to use.
	* @param status_code The status code to send.
	* @param status1 A status message to send. Can be NULL if not required.
	* @param status2 An additional status plist to attach to the response.
	* Can be NULL if not required.
	*
	* @return MOBILEBACKUP2_E_SUCCESS on success, MOBILEBACKUP2_E_INVALID_ARG
	* if client is invalid, or another MOBILEBACKUP2_E_* otherwise.
	*/
	mobilebackup2_error_t mobilebackup2_send_status_response(mobilebackup2_client_t client, int status_code, const char *status1, plist_t status2);

	#ifdef __cplusplus
	}
	#endif

	#endif