# ===========================================================================
#     https://www.gnu.org/software/autoconf-archive/ax_code_coverage.html
# ===========================================================================
#
# SYNOPSIS
#
#   AX_CODE_COVERAGE()
#
# DESCRIPTION
#
#   Defines CODE_COVERAGE_CPPFLAGS, CODE_COVERAGE_CFLAGS,
#   CODE_COVERAGE_CXXFLAGS and CODE_COVERAGE_LIBS which should be included
#   in the CPPFLAGS, CFLAGS CXXFLAGS and LIBS/LIBADD variables of every
#   build target (program or library) which should be built with code
#   coverage support. Also add rules using AX_ADD_AM_MACRO_STATIC; and
#   $enable_code_coverage which can be used in subsequent configure output.
#   CODE_COVERAGE_ENABLED is defined and substituted, and corresponds to the
#   value of the --enable-code-coverage option, which defaults to being
#   disabled.
#
#   Test also for gcov program and create GCOV variable that could be
#   substituted.
#
#   Note that all optimization flags in CFLAGS must be disabled when code
#   coverage is enabled.
#
#   Usage example:
#
#   configure.ac:
#
#     AX_CODE_COVERAGE
#
#   Makefile.am:
#
#     include $(top_srcdir)/aminclude_static.am
#
#     my_program_LIBS = ... $(CODE_COVERAGE_LIBS) ...
#     my_program_CPPFLAGS = ... $(CODE_COVERAGE_CPPFLAGS) ...
#     my_program_CFLAGS = ... $(CODE_COVERAGE_CFLAGS) ...
#     my_program_CXXFLAGS = ... $(CODE_COVERAGE_CXXFLAGS) ...
#
#     clean-local: code-coverage-clean
#     distclean-local: code-coverage-dist-clean
#
#   This results in a "check-code-coverage" rule being added to any
#   Makefile.am which do "include $(top_srcdir)/aminclude_static.am"
#   (assuming the module has been configured with --enable-code-coverage).
#   Running `make check-code-coverage` in that directory will run the
#   module's test suite (`make check`) and build a code coverage report
#   detailing the code which was touched, then print the URI for the report.
#
#   This code was derived from Makefile.decl in GLib, originally licensed
#   under LGPLv2.1+.
#
# LICENSE
#
#   Copyright (c) 2012, 2016 Philip Withnall
#   Copyright (c) 2012 Xan Lopez
#   Copyright (c) 2012 Christian Persch
#   Copyright (c) 2012 Paolo Borelli
#   Copyright (c) 2012 Dan Winship
#   Copyright (c) 2015,2018 Bastien ROUCARIES
#
#   This library is free software; you can redistribute it and/or modify it
#   under the terms of the GNU Lesser General Public License as published by
#   the Free Software Foundation; either version 2.1 of the License, or (at
#   your option) any later version.
#
#   This library is distributed in the hope that it will be useful, but
#   WITHOUT ANY WARRANTY; without even the implied warranty of
#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser
#   General Public License for more details.
#
#   You should have received a copy of the GNU Lesser General Public License
#   along with this program. If not, see <https://www.gnu.org/licenses/>.

#serial 34

m4_define(_AX_CODE_COVERAGE_RULES,[
AX_ADD_AM_MACRO_STATIC([
# Code coverage
#
# Optional:
#  - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.
#    Multiple directories may be specified, separated by whitespace.
#    (Default: \$(top_builddir))
#  - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated
#    by lcov for code coverage. (Default:
#    \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage.info)
#  - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage
#    reports to be created. (Default:
#    \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage)
#  - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage,
#    set to 0 to disable it and leave empty to stay with the default.
#    (Default: empty)
#  - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov
#    instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
#  - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov
#    instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
#  - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov
#  - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the
#    collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
#  - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov
#    instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
#  - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering
#    lcov instance. (Default: empty)
#  - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov
#    instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
#  - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the
#    genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
#  - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml
#    instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
#  - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore
#
# The generated report will be titled using the \$(PACKAGE_NAME) and
# \$(PACKAGE_VERSION). In order to add the current git hash to the title,
# use the git-version-gen script, available online.
# Optional variables
# run only on top dir
if CODE_COVERAGE_ENABLED
 ifeq (\$(abs_builddir), \$(abs_top_builddir))
CODE_COVERAGE_DIRECTORY ?= \$(top_builddir)
CODE_COVERAGE_OUTPUT_FILE ?= \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage.info
CODE_COVERAGE_OUTPUT_DIRECTORY ?= \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage

CODE_COVERAGE_BRANCH_COVERAGE ?=
CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= \$(if \$(CODE_COVERAGE_BRANCH_COVERAGE),\
--rc lcov_branch_coverage=\$(CODE_COVERAGE_BRANCH_COVERAGE))
CODE_COVERAGE_LCOV_SHOPTS ?= \$(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool \"\$(GCOV)\"
CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= \$(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
CODE_COVERAGE_LCOV_OPTIONS ?= \$(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?=
CODE_COVERAGE_LCOV_RMOPTS ?= \$(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\
\$(if \$(CODE_COVERAGE_BRANCH_COVERAGE),\
--rc genhtml_branch_coverage=\$(CODE_COVERAGE_BRANCH_COVERAGE))
CODE_COVERAGE_GENHTML_OPTIONS ?= \$(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
CODE_COVERAGE_IGNORE_PATTERN ?=

GITIGNOREFILES := \$(GITIGNOREFILES) \$(CODE_COVERAGE_OUTPUT_FILE) \$(CODE_COVERAGE_OUTPUT_DIRECTORY)
code_coverage_v_lcov_cap = \$(code_coverage_v_lcov_cap_\$(V))
code_coverage_v_lcov_cap_ = \$(code_coverage_v_lcov_cap_\$(AM_DEFAULT_VERBOSITY))
code_coverage_v_lcov_cap_0 = @echo \"  LCOV   --capture\" \$(CODE_COVERAGE_OUTPUT_FILE);
code_coverage_v_lcov_ign = \$(code_coverage_v_lcov_ign_\$(V))
code_coverage_v_lcov_ign_ = \$(code_coverage_v_lcov_ign_\$(AM_DEFAULT_VERBOSITY))
code_coverage_v_lcov_ign_0 = @echo \"  LCOV   --remove /tmp/*\" \$(CODE_COVERAGE_IGNORE_PATTERN);
code_coverage_v_genhtml = \$(code_coverage_v_genhtml_\$(V))
code_coverage_v_genhtml_ = \$(code_coverage_v_genhtml_\$(AM_DEFAULT_VERBOSITY))
code_coverage_v_genhtml_0 = @echo \"  GEN   \" \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\";
code_coverage_quiet = \$(code_coverage_quiet_\$(V))
code_coverage_quiet_ = \$(code_coverage_quiet_\$(AM_DEFAULT_VERBOSITY))
code_coverage_quiet_0 = --quiet

# sanitizes the test-name: replaces with underscores: dashes and dots
code_coverage_sanitize = \$(subst -,_,\$(subst .,_,\$(1)))

# Use recursive makes in order to ignore errors during check
check-code-coverage:
	-\$(AM_V_at)\$(MAKE) \$(AM_MAKEFLAGS) -k check
	\$(AM_V_at)\$(MAKE) \$(AM_MAKEFLAGS) code-coverage-capture

# Capture code coverage data
code-coverage-capture: code-coverage-capture-hook
	\$(code_coverage_v_lcov_cap)\$(LCOV) \$(code_coverage_quiet) \$(addprefix --directory ,\$(CODE_COVERAGE_DIRECTORY)) --capture --output-file \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" --test-name \"\$(call code_coverage_sanitize,\$(PACKAGE_NAME)-\$(PACKAGE_VERSION))\" --no-checksum --compat-libtool \$(CODE_COVERAGE_LCOV_SHOPTS) \$(CODE_COVERAGE_LCOV_OPTIONS)
	\$(code_coverage_v_lcov_ign)\$(LCOV) \$(code_coverage_quiet) \$(addprefix --directory ,\$(CODE_COVERAGE_DIRECTORY)) --remove \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" \"/tmp/*\" \$(CODE_COVERAGE_IGNORE_PATTERN) --output-file \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \$(CODE_COVERAGE_LCOV_SHOPTS) \$(CODE_COVERAGE_LCOV_RMOPTS)
	-@rm -f \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\"
	\$(code_coverage_v_genhtml)LANG=C \$(GENHTML) \$(code_coverage_quiet) \$(addprefix --prefix ,\$(CODE_COVERAGE_DIRECTORY)) --output-directory \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\" --title \"\$(PACKAGE_NAME)-\$(PACKAGE_VERSION) Code Coverage\" --legend --show-details \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \$(CODE_COVERAGE_GENHTML_OPTIONS)
	@echo \"file://\$(abs_builddir)/\$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html\"

code-coverage-clean:
	-\$(LCOV) --directory \$(top_builddir) -z
	-rm -rf \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\"
	-find . \\( -name \"*.gcda\" -o -name \"*.gcno\" -o -name \"*.gcov\" \\) -delete

code-coverage-dist-clean:

A][M_DISTCHECK_CONFIGURE_FLAGS := \$(A][M_DISTCHECK_CONFIGURE_FLAGS) --disable-code-coverage
 else # ifneq (\$(abs_builddir), \$(abs_top_builddir))
check-code-coverage:

code-coverage-capture: code-coverage-capture-hook

code-coverage-clean:

code-coverage-dist-clean:
 endif # ifeq (\$(abs_builddir), \$(abs_top_builddir))
else #! CODE_COVERAGE_ENABLED
# Use recursive makes in order to ignore errors during check
check-code-coverage:
	@echo \"Need to reconfigure with --enable-code-coverage\"
# Capture code coverage data
code-coverage-capture: code-coverage-capture-hook
	@echo \"Need to reconfigure with --enable-code-coverage\"

code-coverage-clean:

code-coverage-dist-clean:

endif #CODE_COVERAGE_ENABLED
# Hook rule executed before code-coverage-capture, overridable by the user
code-coverage-capture-hook:

.PHONY: check-code-coverage code-coverage-capture code-coverage-dist-clean code-coverage-clean code-coverage-capture-hook
])
])

AC_DEFUN([_AX_CODE_COVERAGE_ENABLED],[
	AX_CHECK_GNU_MAKE([],[AC_MSG_ERROR([not using GNU make that is needed for coverage])])
	AC_REQUIRE([AX_ADD_AM_MACRO_STATIC])
	# check for gcov
	AC_CHECK_TOOL([GCOV],
		  [$_AX_CODE_COVERAGE_GCOV_PROG_WITH],
		  [:])
	AS_IF([test "X$GCOV" = "X:"],
	      [AC_MSG_ERROR([gcov is needed to do coverage])])
	AC_SUBST([GCOV])

	dnl Check if gcc is being used
	AS_IF([ test "$GCC" = "no" ], [
		AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage])
	      ])

	AC_CHECK_PROG([LCOV], [lcov], [lcov])
	AC_CHECK_PROG([GENHTML], [genhtml], [genhtml])

	AS_IF([ test x"$LCOV" = x ], [
		AC_MSG_ERROR([To enable code coverage reporting you must have lcov installed])
	      ])

	AS_IF([ test x"$GENHTML" = x ], [
		AC_MSG_ERROR([Could not find genhtml from the lcov package])
	])

	dnl Build the code coverage flags
	dnl Define CODE_COVERAGE_LDFLAGS for backwards compatibility
	CODE_COVERAGE_CPPFLAGS="-DNDEBUG"
	CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
	CODE_COVERAGE_CXXFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
	CODE_COVERAGE_LIBS="-lgcov"

	AC_SUBST([CODE_COVERAGE_CPPFLAGS])
	AC_SUBST([CODE_COVERAGE_CFLAGS])
	AC_SUBST([CODE_COVERAGE_CXXFLAGS])
	AC_SUBST([CODE_COVERAGE_LIBS])
])

AC_DEFUN([AX_CODE_COVERAGE],[
	dnl Check for --enable-code-coverage

	# allow to override gcov location
	AC_ARG_WITH([gcov],
	  [AS_HELP_STRING([--with-gcov[=GCOV]], [use given GCOV for coverage (GCOV=gcov).])],
	  [_AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov],
	  [_AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov])

	AC_MSG_CHECKING([whether to build with code coverage support])
	AC_ARG_ENABLE([code-coverage],
	  AS_HELP_STRING([--enable-code-coverage],
	  [Whether to enable code coverage support]),,
	  enable_code_coverage=no)

	AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test "x$enable_code_coverage" = xyes])
	AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage])
	AC_MSG_RESULT($enable_code_coverage)

	AS_IF([ test "x$enable_code_coverage" = xyes ], [
		_AX_CODE_COVERAGE_ENABLED
	      ])

	_AX_CODE_COVERAGE_RULES
])