blob: af6c1ae365933cd04d2c877cc4686e7a603f0679 [file] [log] [blame]
/* -*- Mode: C; indent-tabs-mode:t ; c-basic-offset:8 -*- */
/*
* I/O functions for libusb
* Copyright © 2007-2009 Daniel Drake <dsd@gentoo.org>
* Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com>
* Copyright © 2019 Nathan Hjelm <hjelmn@cs.umm.edu>
* Copyright © 2019 Google LLC. All rights reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "libusbi.h"
#include "hotplug.h"
#include <errno.h>
#ifdef USBI_TIMERFD_AVAILABLE
#include <sys/timerfd.h>
#include <unistd.h>
#endif
/**
* \page libusb_io Synchronous and asynchronous device I/O
*
* \section io_intro Introduction
*
* If you're using libusb in your application, you're probably wanting to
* perform I/O with devices - you want to perform USB data transfers.
*
* libusb offers two separate interfaces for device I/O. This page aims to
* introduce the two in order to help you decide which one is more suitable
* for your application. You can also choose to use both interfaces in your
* application by considering each transfer on a case-by-case basis.
*
* Once you have read through the following discussion, you should consult the
* detailed API documentation pages for the details:
* - \ref libusb_syncio
* - \ref libusb_asyncio
*
* \section theory Transfers at a logical level
*
* At a logical level, USB transfers typically happen in two parts. For
* example, when reading data from a endpoint:
* -# A request for data is sent to the device
* -# Some time later, the incoming data is received by the host
*
* or when writing data to an endpoint:
*
* -# The data is sent to the device
* -# Some time later, the host receives acknowledgement from the device that
* the data has been transferred.
*
* There may be an indefinite delay between the two steps. Consider a
* fictional USB input device with a button that the user can press. In order
* to determine when the button is pressed, you would likely submit a request
* to read data on a bulk or interrupt endpoint and wait for data to arrive.
* Data will arrive when the button is pressed by the user, which is
* potentially hours later.
*
* libusb offers both a synchronous and an asynchronous interface to performing
* USB transfers. The main difference is that the synchronous interface
* combines both steps indicated above into a single function call, whereas
* the asynchronous interface separates them.
*
* \section sync The synchronous interface
*
* The synchronous I/O interface allows you to perform a USB transfer with
* a single function call. When the function call returns, the transfer has
* completed and you can parse the results.
*
* If you have used the libusb-0.1 before, this I/O style will seem familar to
* you. libusb-0.1 only offered a synchronous interface.
*
* In our input device example, to read button presses you might write code
* in the following style:
\code
unsigned char data[4];
int actual_length;
int r = libusb_bulk_transfer(dev_handle, LIBUSB_ENDPOINT_IN, data, sizeof(data), &actual_length, 0);
if (r == 0 && actual_length == sizeof(data)) {
// results of the transaction can now be found in the data buffer
// parse them here and report button press
} else {
error();
}
\endcode
*
* The main advantage of this model is simplicity: you did everything with
* a single simple function call.
*
* However, this interface has its limitations. Your application will sleep
* inside libusb_bulk_transfer() until the transaction has completed. If it
* takes the user 3 hours to press the button, your application will be
* sleeping for that long. Execution will be tied up inside the library -
* the entire thread will be useless for that duration.
*
* Another issue is that by tieing up the thread with that single transaction
* there is no possibility of performing I/O with multiple endpoints and/or
* multiple devices simultaneously, unless you resort to creating one thread
* per transaction.
*
* Additionally, there is no opportunity to cancel the transfer after the
* request has been submitted.
*
* For details on how to use the synchronous API, see the
* \ref libusb_syncio "synchronous I/O API documentation" pages.
*
* \section async The asynchronous interface
*
* Asynchronous I/O is the most significant new feature in libusb-1.0.
* Although it is a more complex interface, it solves all the issues detailed
* above.
*
* Instead of providing which functions that block until the I/O has complete,
* libusb's asynchronous interface presents non-blocking functions which
* begin a transfer and then return immediately. Your application passes a
* callback function pointer to this non-blocking function, which libusb will
* call with the results of the transaction when it has completed.
*
* Transfers which have been submitted through the non-blocking functions
* can be cancelled with a separate function call.
*
* The non-blocking nature of this interface allows you to be simultaneously
* performing I/O to multiple endpoints on multiple devices, without having
* to use threads.
*
* This added flexibility does come with some complications though:
* - In the interest of being a lightweight library, libusb does not create
* threads and can only operate when your application is calling into it. Your
* application must call into libusb from it's main loop when events are ready
* to be handled, or you must use some other scheme to allow libusb to
* undertake whatever work needs to be done.
* - libusb also needs to be called into at certain fixed points in time in
* order to accurately handle transfer timeouts.
* - Memory handling becomes more complex. You cannot use stack memory unless
* the function with that stack is guaranteed not to return until the transfer
* callback has finished executing.
* - You generally lose some linearity from your code flow because submitting
* the transfer request is done in a separate function from where the transfer
* results are handled. This becomes particularly obvious when you want to
* submit a second transfer based on the results of an earlier transfer.
*
* Internally, libusb's synchronous interface is expressed in terms of function
* calls to the asynchronous interface.
*
* For details on how to use the asynchronous API, see the
* \ref libusb_asyncio "asynchronous I/O API" documentation pages.
*/
/**
* \page libusb_packetoverflow Packets and overflows
*
* \section packets Packet abstraction
*
* The USB specifications describe how data is transmitted in packets, with
* constraints on packet size defined by endpoint descriptors. The host must
* not send data payloads larger than the endpoint's maximum packet size.
*
* libusb and the underlying OS abstract out the packet concept, allowing you
* to request transfers of any size. Internally, the request will be divided
* up into correctly-sized packets. You do not have to be concerned with
* packet sizes, but there is one exception when considering overflows.
*
* \section overflow Bulk/interrupt transfer overflows
*
* When requesting data on a bulk endpoint, libusb requires you to supply a
* buffer and the maximum number of bytes of data that libusb can put in that
* buffer. However, the size of the buffer is not communicated to the device -
* the device is just asked to send any amount of data.
*
* There is no problem if the device sends an amount of data that is less than
* or equal to the buffer size. libusb reports this condition to you through
* the \ref libusb_transfer::actual_length "libusb_transfer.actual_length"
* field.
*
* Problems may occur if the device attempts to send more data than can fit in
* the buffer. libusb reports LIBUSB_TRANSFER_OVERFLOW for this condition but
* other behaviour is largely undefined: actual_length may or may not be
* accurate, the chunk of data that can fit in the buffer (before overflow)
* may or may not have been transferred.
*
* Overflows are nasty, but can be avoided. Even though you were told to
* ignore packets above, think about the lower level details: each transfer is
* split into packets (typically small, with a maximum size of 512 bytes).
* Overflows can only happen if the final packet in an incoming data transfer
* is smaller than the actual packet that the device wants to transfer.
* Therefore, you will never see an overflow if your transfer buffer size is a
* multiple of the endpoint's packet size: the final packet will either
* fill up completely or will be only partially filled.
*/
/**
* @defgroup libusb_asyncio Asynchronous device I/O
*
* This page details libusb's asynchronous (non-blocking) API for USB device
* I/O. This interface is very powerful but is also quite complex - you will
* need to read this page carefully to understand the necessary considerations
* and issues surrounding use of this interface. Simplistic applications
* may wish to consider the \ref libusb_syncio "synchronous I/O API" instead.
*
* The asynchronous interface is built around the idea of separating transfer
* submission and handling of transfer completion (the synchronous model
* combines both of these into one). There may be a long delay between
* submission and completion, however the asynchronous submission function
* is non-blocking so will return control to your application during that
* potentially long delay.
*
* \section asyncabstraction Transfer abstraction
*
* For the asynchronous I/O, libusb implements the concept of a generic
* transfer entity for all types of I/O (control, bulk, interrupt,
* isochronous). The generic transfer object must be treated slightly
* differently depending on which type of I/O you are performing with it.
*
* This is represented by the public libusb_transfer structure type.
*
* \section asynctrf Asynchronous transfers
*
* We can view asynchronous I/O as a 5 step process:
* -# <b>Allocation</b>: allocate a libusb_transfer
* -# <b>Filling</b>: populate the libusb_transfer instance with information
* about the transfer you wish to perform
* -# <b>Submission</b>: ask libusb to submit the transfer
* -# <b>Completion handling</b>: examine transfer results in the
* libusb_transfer structure
* -# <b>Deallocation</b>: clean up resources
*
*
* \subsection asyncalloc Allocation
*
* This step involves allocating memory for a USB transfer. This is the
* generic transfer object mentioned above. At this stage, the transfer
* is "blank" with no details about what type of I/O it will be used for.
*
* Allocation is done with the libusb_alloc_transfer() function. You must use
* this function rather than allocating your own transfers.
*
* \subsection asyncfill Filling
*
* This step is where you take a previously allocated transfer and fill it
* with information to determine the message type and direction, data buffer,
* callback function, etc.
*
* You can either fill the required fields yourself or you can use the
* helper functions: libusb_fill_control_transfer(), libusb_fill_bulk_transfer()
* and libusb_fill_interrupt_transfer().
*
* \subsection asyncsubmit Submission
*
* When you have allocated a transfer and filled it, you can submit it using
* libusb_submit_transfer(). This function returns immediately but can be
* regarded as firing off the I/O request in the background.
*
* \subsection asynccomplete Completion handling
*
* After a transfer has been submitted, one of four things can happen to it:
*
* - The transfer completes (i.e. some data was transferred)
* - The transfer has a timeout and the timeout expires before all data is
* transferred
* - The transfer fails due to an error
* - The transfer is cancelled
*
* Each of these will cause the user-specified transfer callback function to
* be invoked. It is up to the callback function to determine which of the
* above actually happened and to act accordingly.
*
* The user-specified callback is passed a pointer to the libusb_transfer
* structure which was used to setup and submit the transfer. At completion
* time, libusb has populated this structure with results of the transfer:
* success or failure reason, number of bytes of data transferred, etc. See
* the libusb_transfer structure documentation for more information.
*
* <b>Important Note</b>: The user-specified callback is called from an event
* handling context. It is therefore important that no calls are made into
* libusb that will attempt to perform any event handling. Examples of such
* functions are any listed in the \ref libusb_syncio "synchronous API" and any of
* the blocking functions that retrieve \ref libusb_desc "USB descriptors".
*
* \subsection Deallocation
*
* When a transfer has completed (i.e. the callback function has been invoked),
* you are advised to free the transfer (unless you wish to resubmit it, see
* below). Transfers are deallocated with libusb_free_transfer().
*
* It is undefined behaviour to free a transfer which has not completed.
*
* \section asyncresubmit Resubmission
*
* You may be wondering why allocation, filling, and submission are all
* separated above where they could reasonably be combined into a single
* operation.
*
* The reason for separation is to allow you to resubmit transfers without
* having to allocate new ones every time. This is especially useful for
* common situations dealing with interrupt endpoints - you allocate one
* transfer, fill and submit it, and when it returns with results you just
* resubmit it for the next interrupt.
*
* \section asynccancel Cancellation
*
* Another advantage of using the asynchronous interface is that you have
* the ability to cancel transfers which have not yet completed. This is
* done by calling the libusb_cancel_transfer() function.
*
* libusb_cancel_transfer() is asynchronous/non-blocking in itself. When the
* cancellation actually completes, the transfer's callback function will
* be invoked, and the callback function should check the transfer status to
* determine that it was cancelled.
*
* Freeing the transfer after it has been cancelled but before cancellation
* has completed will result in undefined behaviour.
*
* When a transfer is cancelled, some of the data may have been transferred.
* libusb will communicate this to you in the transfer callback. Do not assume
* that no data was transferred.
*
* \section bulk_overflows Overflows on device-to-host bulk/interrupt endpoints
*
* If your device does not have predictable transfer sizes (or it misbehaves),
* your application may submit a request for data on an IN endpoint which is
* smaller than the data that the device wishes to send. In some circumstances
* this will cause an overflow, which is a nasty condition to deal with. See
* the \ref libusb_packetoverflow page for discussion.
*
* \section asyncctrl Considerations for control transfers
*
* The <tt>libusb_transfer</tt> structure is generic and hence does not
* include specific fields for the control-specific setup packet structure.
*
* In order to perform a control transfer, you must place the 8-byte setup
* packet at the start of the data buffer. To simplify this, you could
* cast the buffer pointer to type struct libusb_control_setup, or you can
* use the helper function libusb_fill_control_setup().
*
* The wLength field placed in the setup packet must be the length you would
* expect to be sent in the setup packet: the length of the payload that
* follows (or the expected maximum number of bytes to receive). However,
* the length field of the libusb_transfer object must be the length of
* the data buffer - i.e. it should be wLength <em>plus</em> the size of
* the setup packet (LIBUSB_CONTROL_SETUP_SIZE).
*
* If you use the helper functions, this is simplified for you:
* -# Allocate a buffer of size LIBUSB_CONTROL_SETUP_SIZE plus the size of the
* data you are sending/requesting.
* -# Call libusb_fill_control_setup() on the data buffer, using the transfer
* request size as the wLength value (i.e. do not include the extra space you
* allocated for the control setup).
* -# If this is a host-to-device transfer, place the data to be transferred
* in the data buffer, starting at offset LIBUSB_CONTROL_SETUP_SIZE.
* -# Call libusb_fill_control_transfer() to associate the data buffer with
* the transfer (and to set the remaining details such as callback and timeout).
* - Note that there is no parameter to set the length field of the transfer.
* The length is automatically inferred from the wLength field of the setup
* packet.
* -# Submit the transfer.
*
* The multi-byte control setup fields (wValue, wIndex and wLength) must
* be given in little-endian byte order (the endianness of the USB bus).
* Endianness conversion is transparently handled by
* libusb_fill_control_setup() which is documented to accept host-endian
* values.
*
* Further considerations are needed when handling transfer completion in
* your callback function:
* - As you might expect, the setup packet will still be sitting at the start
* of the data buffer.
* - If this was a device-to-host transfer, the received data will be sitting
* at offset LIBUSB_CONTROL_SETUP_SIZE into the buffer.
* - The actual_length field of the transfer structure is relative to the
* wLength of the setup packet, rather than the size of the data buffer. So,
* if your wLength was 4, your transfer's <tt>length</tt> was 12, then you
* should expect an <tt>actual_length</tt> of 4 to indicate that the data was
* transferred in entirity.
*
* To simplify parsing of setup packets and obtaining the data from the
* correct offset, you may wish to use the libusb_control_transfer_get_data()
* and libusb_control_transfer_get_setup() functions within your transfer
* callback.
*
* Even though control endpoints do not halt, a completed control transfer
* may have a LIBUSB_TRANSFER_STALL status code. This indicates the control
* request was not supported.
*
* \section asyncintr Considerations for interrupt transfers
*
* All interrupt transfers are performed using the polling interval presented
* by the bInterval value of the endpoint descriptor.
*
* \section asynciso Considerations for isochronous transfers
*
* Isochronous transfers are more complicated than transfers to
* non-isochronous endpoints.
*
* To perform I/O to an isochronous endpoint, allocate the transfer by calling
* libusb_alloc_transfer() with an appropriate number of isochronous packets.
*
* During filling, set \ref libusb_transfer::type "type" to
* \ref libusb_transfer_type::LIBUSB_TRANSFER_TYPE_ISOCHRONOUS
* "LIBUSB_TRANSFER_TYPE_ISOCHRONOUS", and set
* \ref libusb_transfer::num_iso_packets "num_iso_packets" to a value less than
* or equal to the number of packets you requested during allocation.
* libusb_alloc_transfer() does not set either of these fields for you, given
* that you might not even use the transfer on an isochronous endpoint.
*
* Next, populate the length field for the first num_iso_packets entries in
* the \ref libusb_transfer::iso_packet_desc "iso_packet_desc" array. Section
* 5.6.3 of the USB2 specifications describe how the maximum isochronous
* packet length is determined by the wMaxPacketSize field in the endpoint
* descriptor.
* Two functions can help you here:
*
* - libusb_get_max_iso_packet_size() is an easy way to determine the max
* packet size for an isochronous endpoint. Note that the maximum packet
* size is actually the maximum number of bytes that can be transmitted in
* a single microframe, therefore this function multiplies the maximum number
* of bytes per transaction by the number of transaction opportunities per
* microframe.
* - libusb_set_iso_packet_lengths() assigns the same length to all packets
* within a transfer, which is usually what you want.
*
* For outgoing transfers, you'll obviously fill the buffer and populate the
* packet descriptors in hope that all the data gets transferred. For incoming
* transfers, you must ensure the buffer has sufficient capacity for
* the situation where all packets transfer the full amount of requested data.
*
* Completion handling requires some extra consideration. The
* \ref libusb_transfer::actual_length "actual_length" field of the transfer
* is meaningless and should not be examined; instead you must refer to the
* \ref libusb_iso_packet_descriptor::actual_length "actual_length" field of
* each individual packet.
*
* The \ref libusb_transfer::status "status" field of the transfer is also a
* little misleading:
* - If the packets were submitted and the isochronous data microframes
* completed normally, status will have value
* \ref libusb_transfer_status::LIBUSB_TRANSFER_COMPLETED
* "LIBUSB_TRANSFER_COMPLETED". Note that bus errors and software-incurred
* delays are not counted as transfer errors; the transfer.status field may
* indicate COMPLETED even if some or all of the packets failed. Refer to
* the \ref libusb_iso_packet_descriptor::status "status" field of each
* individual packet to determine packet failures.
* - The status field will have value
* \ref libusb_transfer_status::LIBUSB_TRANSFER_ERROR
* "LIBUSB_TRANSFER_ERROR" only when serious errors were encountered.
* - Other transfer status codes occur with normal behaviour.
*
* The data for each packet will be found at an offset into the buffer that
* can be calculated as if each prior packet completed in full. The
* libusb_get_iso_packet_buffer() and libusb_get_iso_packet_buffer_simple()
* functions may help you here.
*
* <b>Note</b>: Some operating systems (e.g. Linux) may impose limits on the
* length of individual isochronous packets and/or the total length of the
* isochronous transfer. Such limits can be difficult for libusb to detect,
* so the library will simply try and submit the transfer as set up by you.
* If the transfer fails to submit because it is too large,
* libusb_submit_transfer() will return
* \ref libusb_error::LIBUSB_ERROR_INVALID_PARAM "LIBUSB_ERROR_INVALID_PARAM".
*
* \section asyncmem Memory caveats
*
* In most circumstances, it is not safe to use stack memory for transfer
* buffers. This is because the function that fired off the asynchronous
* transfer may return before libusb has finished using the buffer, and when
* the function returns it's stack gets destroyed. This is true for both
* host-to-device and device-to-host transfers.
*
* The only case in which it is safe to use stack memory is where you can
* guarantee that the function owning the stack space for the buffer does not
* return until after the transfer's callback function has completed. In every
* other case, you need to use heap memory instead.
*
* \section asyncflags Fine control
*
* Through using this asynchronous interface, you may find yourself repeating
* a few simple operations many times. You can apply a bitwise OR of certain
* flags to a transfer to simplify certain things:
* - \ref libusb_transfer_flags::LIBUSB_TRANSFER_SHORT_NOT_OK
* "LIBUSB_TRANSFER_SHORT_NOT_OK" results in transfers which transferred
* less than the requested amount of data being marked with status
* \ref libusb_transfer_status::LIBUSB_TRANSFER_ERROR "LIBUSB_TRANSFER_ERROR"
* (they would normally be regarded as COMPLETED)
* - \ref libusb_transfer_flags::LIBUSB_TRANSFER_FREE_BUFFER
* "LIBUSB_TRANSFER_FREE_BUFFER" allows you to ask libusb to free the transfer
* buffer when freeing the transfer.
* - \ref libusb_transfer_flags::LIBUSB_TRANSFER_FREE_TRANSFER
* "LIBUSB_TRANSFER_FREE_TRANSFER" causes libusb to automatically free the
* transfer after the transfer callback returns.
*
* \section asyncevent Event handling
*
* An asynchronous model requires that libusb perform work at various
* points in time - namely processing the results of previously-submitted
* transfers and invoking the user-supplied callback function.
*
* This gives rise to the libusb_handle_events() function which your
* application must call into when libusb has work do to. This gives libusb
* the opportunity to reap pending transfers, invoke callbacks, etc.
*
* There are 2 different approaches to dealing with libusb_handle_events:
*
* -# Repeatedly call libusb_handle_events() in blocking mode from a dedicated
* thread.
* -# Integrate libusb with your application's main event loop. libusb
* exposes a set of file descriptors which allow you to do this.
*
* The first approach has the big advantage that it will also work on Windows
* were libusb' poll API for select / poll integration is not available. So
* if you want to support Windows and use the async API, you must use this
* approach, see the \ref eventthread "Using an event handling thread" section
* below for details.
*
* If you prefer a single threaded approach with a single central event loop,
* see the \ref libusb_poll "polling and timing" section for how to integrate libusb
* into your application's main event loop.
*
* \section eventthread Using an event handling thread
*
* Lets begin with stating the obvious: If you're going to use a separate
* thread for libusb event handling, your callback functions MUST be
* threadsafe.
*
* Other then that doing event handling from a separate thread, is mostly
* simple. You can use an event thread function as follows:
\code
void *event_thread_func(void *ctx)
{
while (event_thread_run)
libusb_handle_events(ctx);
return NULL;
}
\endcode
*
* There is one caveat though, stopping this thread requires setting the
* event_thread_run variable to 0, and after that libusb_handle_events() needs
* to return control to event_thread_func. But unless some event happens,
* libusb_handle_events() will not return.
*
* There are 2 different ways of dealing with this, depending on if your
* application uses libusb' \ref libusb_hotplug "hotplug" support or not.
*
* Applications which do not use hotplug support, should not start the event
* thread until after their first call to libusb_open(), and should stop the
* thread when closing the last open device as follows:
\code
void my_close_handle(libusb_device_handle *dev_handle)
{
if (open_devs == 1)
event_thread_run = 0;
libusb_close(dev_handle); // This wakes up libusb_handle_events()
if (open_devs == 1)
pthread_join(event_thread);
open_devs--;
}
\endcode
*
* Applications using hotplug support should start the thread at program init,
* after having successfully called libusb_hotplug_register_callback(), and
* should stop the thread at program exit as follows:
\code
void my_libusb_exit(void)
{
event_thread_run = 0;
libusb_hotplug_deregister_callback(ctx, hotplug_cb_handle); // This wakes up libusb_handle_events()
pthread_join(event_thread);
libusb_exit(ctx);
}
\endcode
*/
/**
* @defgroup libusb_poll Polling and timing
*
* This page documents libusb's functions for polling events and timing.
* These functions are only necessary for users of the
* \ref libusb_asyncio "asynchronous API". If you are only using the simpler
* \ref libusb_syncio "synchronous API" then you do not need to ever call these
* functions.
*
* The justification for the functionality described here has already been
* discussed in the \ref asyncevent "event handling" section of the
* asynchronous API documentation. In summary, libusb does not create internal
* threads for event processing and hence relies on your application calling
* into libusb at certain points in time so that pending events can be handled.
*
* Your main loop is probably already calling poll() or select() or a
* variant on a set of file descriptors for other event sources (e.g. keyboard
* button presses, mouse movements, network sockets, etc). You then add
* libusb's file descriptors to your poll()/select() calls, and when activity
* is detected on such descriptors you know it is time to call
* libusb_handle_events().
*
* There is one final event handling complication. libusb supports
* asynchronous transfers which time out after a specified time period.
*
* On some platforms a timerfd is used, so the timeout handling is just another
* fd, on other platforms this requires that libusb is called into at or after
* the timeout to handle it. So, in addition to considering libusb's file
* descriptors in your main event loop, you must also consider that libusb
* sometimes needs to be called into at fixed points in time even when there
* is no file descriptor activity, see \ref polltime details.
*
* In order to know precisely when libusb needs to be called into, libusb
* offers you a set of pollable file descriptors and information about when
* the next timeout expires.
*
* If you are using the asynchronous I/O API, you must take one of the two
* following options, otherwise your I/O will not complete.
*
* \section pollsimple The simple option
*
* If your application revolves solely around libusb and does not need to
* handle other event sources, you can have a program structure as follows:
\code
// initialize libusb
// find and open device
// maybe fire off some initial async I/O
while (user_has_not_requested_exit)
libusb_handle_events(ctx);
// clean up and exit
\endcode
*
* With such a simple main loop, you do not have to worry about managing
* sets of file descriptors or handling timeouts. libusb_handle_events() will
* handle those details internally.
*
* \section libusb_pollmain The more advanced option
*
* \note This functionality is currently only available on Unix-like platforms.
* On Windows, libusb_get_pollfds() simply returns NULL. Applications which
* want to support Windows are advised to use an \ref eventthread
* "event handling thread" instead.
*
* In more advanced applications, you will already have a main loop which
* is monitoring other event sources: network sockets, X11 events, mouse
* movements, etc. Through exposing a set of file descriptors, libusb is
* designed to cleanly integrate into such main loops.
*
* In addition to polling file descriptors for the other event sources, you
* take a set of file descriptors from libusb and monitor those too. When you
* detect activity on libusb's file descriptors, you call
* libusb_handle_events_timeout() in non-blocking mode.
*
* What's more, libusb may also need to handle events at specific moments in
* time. No file descriptor activity is generated at these times, so your
* own application needs to be continually aware of when the next one of these
* moments occurs (through calling libusb_get_next_timeout()), and then it
* needs to call libusb_handle_events_timeout() in non-blocking mode when
* these moments occur. This means that you need to adjust your
* poll()/select() timeout accordingly.
*
* libusb provides you with a set of file descriptors to poll and expects you
* to poll all of them, treating them as a single entity. The meaning of each
* file descriptor in the set is an internal implementation detail,
* platform-dependent and may vary from release to release. Don't try and
* interpret the meaning of the file descriptors, just do as libusb indicates,
* polling all of them at once.
*
* In pseudo-code, you want something that looks like:
\code
// initialise libusb
libusb_get_pollfds(ctx)
while (user has not requested application exit) {
libusb_get_next_timeout(ctx);
poll(on libusb file descriptors plus any other event sources of interest,
using a timeout no larger than the value libusb just suggested)
if (poll() indicated activity on libusb file descriptors)
libusb_handle_events_timeout(ctx, &zero_tv);
if (time has elapsed to or beyond the libusb timeout)
libusb_handle_events_timeout(ctx, &zero_tv);
// handle events from other sources here
}
// clean up and exit
\endcode
*
* \subsection polltime Notes on time-based events
*
* The above complication with having to track time and call into libusb at
* specific moments is a bit of a headache. For maximum compatibility, you do
* need to write your main loop as above, but you may decide that you can
* restrict the supported platforms of your application and get away with
* a more simplistic scheme.
*
* These time-based event complications are \b not required on the following
* platforms:
* - Darwin
* - Linux, provided that the following version requirements are satisfied:
* - Linux v2.6.27 or newer, compiled with timerfd support
* - glibc v2.9 or newer
* - libusb v1.0.5 or newer
*
* Under these configurations, libusb_get_next_timeout() will \em always return
* 0, so your main loop can be simplified to:
\code
// initialise libusb
libusb_get_pollfds(ctx)
while (user has not requested application exit) {
poll(on libusb file descriptors plus any other event sources of interest,
using any timeout that you like)
if (poll() indicated activity on libusb file descriptors)
libusb_handle_events_timeout(ctx, &zero_tv);
// handle events from other sources here
}
// clean up and exit
\endcode
*
* Do remember that if you simplify your main loop to the above, you will
* lose compatibility with some platforms (including legacy Linux platforms,
* and <em>any future platforms supported by libusb which may have time-based
* event requirements</em>). The resultant problems will likely appear as
* strange bugs in your application.
*
* You can use the libusb_pollfds_handle_timeouts() function to do a runtime
* check to see if it is safe to ignore the time-based event complications.
* If your application has taken the shortcut of ignoring libusb's next timeout
* in your main loop, then you are advised to check the return value of
* libusb_pollfds_handle_timeouts() during application startup, and to abort
* if the platform does suffer from these timing complications.
*
* \subsection fdsetchange Changes in the file descriptor set
*
* The set of file descriptors that libusb uses as event sources may change
* during the life of your application. Rather than having to repeatedly
* call libusb_get_pollfds(), you can set up notification functions for when
* the file descriptor set changes using libusb_set_pollfd_notifiers().
*
* \subsection mtissues Multi-threaded considerations
*
* Unfortunately, the situation is complicated further when multiple threads
* come into play. If two threads are monitoring the same file descriptors,
* the fact that only one thread will be woken up when an event occurs causes
* some headaches.
*
* The events lock, event waiters lock, and libusb_handle_events_locked()
* entities are added to solve these problems. You do not need to be concerned
* with these entities otherwise.
*
* See the extra documentation: \ref libusb_mtasync
*/
/** \page libusb_mtasync Multi-threaded applications and asynchronous I/O
*
* libusb is a thread-safe library, but extra considerations must be applied
* to applications which interact with libusb from multiple threads.
*
* The underlying issue that must be addressed is that all libusb I/O
* revolves around monitoring file descriptors through the poll()/select()
* system calls. This is directly exposed at the
* \ref libusb_asyncio "asynchronous interface" but it is important to note that the
* \ref libusb_syncio "synchronous interface" is implemented on top of the
* asynchonrous interface, therefore the same considerations apply.
*
* The issue is that if two or more threads are concurrently calling poll()
* or select() on libusb's file descriptors then only one of those threads
* will be woken up when an event arrives. The others will be completely
* oblivious that anything has happened.
*
* Consider the following pseudo-code, which submits an asynchronous transfer
* then waits for its completion. This style is one way you could implement a
* synchronous interface on top of the asynchronous interface (and libusb
* does something similar, albeit more advanced due to the complications
* explained on this page).
*
\code
void cb(struct libusb_transfer *transfer)
{
int *completed = transfer->user_data;
*completed = 1;
}
void myfunc() {
struct libusb_transfer *transfer;
unsigned char buffer[LIBUSB_CONTROL_SETUP_SIZE] __attribute__ ((aligned (2)));
int completed = 0;
transfer = libusb_alloc_transfer(0);
libusb_fill_control_setup(buffer,
LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_OUT, 0x04, 0x01, 0, 0);
libusb_fill_control_transfer(transfer, dev, buffer, cb, &completed, 1000);
libusb_submit_transfer(transfer);
while (!completed) {
poll(libusb file descriptors, 120*1000);
if (poll indicates activity)
libusb_handle_events_timeout(ctx, &zero_tv);
}
printf("completed!");
// other code here
}
\endcode
*
* Here we are <em>serializing</em> completion of an asynchronous event
* against a condition - the condition being completion of a specific transfer.
* The poll() loop has a long timeout to minimize CPU usage during situations
* when nothing is happening (it could reasonably be unlimited).
*
* If this is the only thread that is polling libusb's file descriptors, there
* is no problem: there is no danger that another thread will swallow up the
* event that we are interested in. On the other hand, if there is another
* thread polling the same descriptors, there is a chance that it will receive
* the event that we were interested in. In this situation, <tt>myfunc()</tt>
* will only realise that the transfer has completed on the next iteration of
* the loop, <em>up to 120 seconds later.</em> Clearly a two-minute delay is
* undesirable, and don't even think about using short timeouts to circumvent
* this issue!
*
* The solution here is to ensure that no two threads are ever polling the
* file descriptors at the same time. A naive implementation of this would
* impact the capabilities of the library, so libusb offers the scheme
* documented below to ensure no loss of functionality.
*
* Before we go any further, it is worth mentioning that all libusb-wrapped
* event handling procedures fully adhere to the scheme documented below.
* This includes libusb_handle_events() and its variants, and all the
* synchronous I/O functions - libusb hides this headache from you.
*
* \section Using libusb_handle_events() from multiple threads
*
* Even when only using libusb_handle_events() and synchronous I/O functions,
* you can still have a race condition. You might be tempted to solve the
* above with libusb_handle_events() like so:
*
\code
libusb_submit_transfer(transfer);
while (!completed) {
libusb_handle_events(ctx);
}
printf("completed!");
\endcode
*
* This however has a race between the checking of completed and
* libusb_handle_events() acquiring the events lock, so another thread
* could have completed the transfer, resulting in this thread hanging
* until either a timeout or another event occurs. See also commit
* 6696512aade99bb15d6792af90ae329af270eba6 which fixes this in the
* synchronous API implementation of libusb.
*
* Fixing this race requires checking the variable completed only after
* taking the event lock, which defeats the concept of just calling
* libusb_handle_events() without worrying about locking. This is why
* libusb-1.0.9 introduces the new libusb_handle_events_timeout_completed()
* and libusb_handle_events_completed() functions, which handles doing the
* completion check for you after they have acquired the lock:
*
\code
libusb_submit_transfer(transfer);
while (!completed) {
libusb_handle_events_completed(ctx, &completed);
}
printf("completed!");
\endcode
*
* This nicely fixes the race in our example. Note that if all you want to
* do is submit a single transfer and wait for its completion, then using
* one of the synchronous I/O functions is much easier.
*
* \section eventlock The events lock
*
* The problem is when we consider the fact that libusb exposes file
* descriptors to allow for you to integrate asynchronous USB I/O into
* existing main loops, effectively allowing you to do some work behind
* libusb's back. If you do take libusb's file descriptors and pass them to
* poll()/select() yourself, you need to be aware of the associated issues.
*
* The first concept to be introduced is the events lock. The events lock
* is used to serialize threads that want to handle events, such that only
* one thread is handling events at any one time.
*
* You must take the events lock before polling libusb file descriptors,
* using libusb_lock_events(). You must release the lock as soon as you have
* aborted your poll()/select() loop, using libusb_unlock_events().
*
* \section threadwait Letting other threads do the work for you
*
* Although the events lock is a critical part of the solution, it is not
* enough on it's own. You might wonder if the following is sufficient...
\code
libusb_lock_events(ctx);
while (!completed) {
poll(libusb file descriptors, 120*1000);
if (poll indicates activity)
libusb_handle_events_timeout(ctx, &zero_tv);
}
libusb_unlock_events(ctx);
\endcode
* ...and the answer is that it is not. This is because the transfer in the
* code shown above may take a long time (say 30 seconds) to complete, and
* the lock is not released until the transfer is completed.
*
* Another thread with similar code that wants to do event handling may be
* working with a transfer that completes after a few milliseconds. Despite
* having such a quick completion time, the other thread cannot check that
* status of its transfer until the code above has finished (30 seconds later)
* due to contention on the lock.
*
* To solve this, libusb offers you a mechanism to determine when another
* thread is handling events. It also offers a mechanism to block your thread
* until the event handling thread has completed an event (and this mechanism
* does not involve polling of file descriptors).
*
* After determining that another thread is currently handling events, you
* obtain the <em>event waiters</em> lock using libusb_lock_event_waiters().
* You then re-check that some other thread is still handling events, and if
* so, you call libusb_wait_for_event().
*
* libusb_wait_for_event() puts your application to sleep until an event
* occurs, or until a thread releases the events lock. When either of these
* things happen, your thread is woken up, and should re-check the condition
* it was waiting on. It should also re-check that another thread is handling
* events, and if not, it should start handling events itself.
*
* This looks like the following, as pseudo-code:
\code
retry:
if (libusb_try_lock_events(ctx) == 0) {
// we obtained the event lock: do our own event handling
while (!completed) {
if (!libusb_event_handling_ok(ctx)) {
libusb_unlock_events(ctx);
goto retry;
}
poll(libusb file descriptors, 120*1000);
if (poll indicates activity)
libusb_handle_events_locked(ctx, 0);
}
libusb_unlock_events(ctx);
} else {
// another thread is doing event handling. wait for it to signal us that
// an event has completed
libusb_lock_event_waiters(ctx);
while (!completed) {
// now that we have the event waiters lock, double check that another
// thread is still handling events for us. (it may have ceased handling
// events in the time it took us to reach this point)
if (!libusb_event_handler_active(ctx)) {
// whoever was handling events is no longer doing so, try again
libusb_unlock_event_waiters(ctx);
goto retry;
}
libusb_wait_for_event(ctx, NULL);
}
libusb_unlock_event_waiters(ctx);
}
printf("completed!\n");
\endcode
*
* A naive look at the above code may suggest that this can only support
* one event waiter (hence a total of 2 competing threads, the other doing
* event handling), because the event waiter seems to have taken the event
* waiters lock while waiting for an event. However, the system does support
* multiple event waiters, because libusb_wait_for_event() actually drops
* the lock while waiting, and reaquires it before continuing.
*
* We have now implemented code which can dynamically handle situations where
* nobody is handling events (so we should do it ourselves), and it can also
* handle situations where another thread is doing event handling (so we can
* piggyback onto them). It is also equipped to handle a combination of
* the two, for example, another thread is doing event handling, but for
* whatever reason it stops doing so before our condition is met, so we take
* over the event handling.
*
* Four functions were introduced in the above pseudo-code. Their importance
* should be apparent from the code shown above.
* -# libusb_try_lock_events() is a non-blocking function which attempts
* to acquire the events lock but returns a failure code if it is contended.
* -# libusb_event_handling_ok() checks that libusb is still happy for your
* thread to be performing event handling. Sometimes, libusb needs to
* interrupt the event handler, and this is how you can check if you have
* been interrupted. If this function returns 0, the correct behaviour is
* for you to give up the event handling lock, and then to repeat the cycle.
* The following libusb_try_lock_events() will fail, so you will become an
* events waiter. For more information on this, read \ref fullstory below.
* -# libusb_handle_events_locked() is a variant of
* libusb_handle_events_timeout() that you can call while holding the
* events lock. libusb_handle_events_timeout() itself implements similar
* logic to the above, so be sure not to call it when you are
* "working behind libusb's back", as is the case here.
* -# libusb_event_handler_active() determines if someone is currently
* holding the events lock
*
* You might be wondering why there is no function to wake up all threads
* blocked on libusb_wait_for_event(). This is because libusb can do this
* internally: it will wake up all such threads when someone calls
* libusb_unlock_events() or when a transfer completes (at the point after its
* callback has returned).
*
* \subsection fullstory The full story
*
* The above explanation should be enough to get you going, but if you're
* really thinking through the issues then you may be left with some more
* questions regarding libusb's internals. If you're curious, read on, and if
* not, skip to the next section to avoid confusing yourself!
*
* The immediate question that may spring to mind is: what if one thread
* modifies the set of file descriptors that need to be polled while another
* thread is doing event handling?
*
* There are 2 situations in which this may happen.
* -# libusb_open() will add another file descriptor to the poll set,
* therefore it is desirable to interrupt the event handler so that it
* restarts, picking up the new descriptor.
* -# libusb_close() will remove a file descriptor from the poll set. There
* are all kinds of race conditions that could arise here, so it is
* important that nobody is doing event handling at this time.
*
* libusb handles these issues internally, so application developers do not
* have to stop their event handlers while opening/closing devices. Here's how
* it works, focusing on the libusb_close() situation first:
*
* -# During initialization, libusb opens an internal pipe, and it adds the read
* end of this pipe to the set of file descriptors to be polled.
* -# During libusb_close(), libusb writes some dummy data on this event pipe.
* This immediately interrupts the event handler. libusb also records
* internally that it is trying to interrupt event handlers for this
* high-priority event.
* -# At this point, some of the functions described above start behaving
* differently:
* - libusb_event_handling_ok() starts returning 1, indicating that it is NOT
* OK for event handling to continue.
* - libusb_try_lock_events() starts returning 1, indicating that another
* thread holds the event handling lock, even if the lock is uncontended.
* - libusb_event_handler_active() starts returning 1, indicating that
* another thread is doing event handling, even if that is not true.
* -# The above changes in behaviour result in the event handler stopping and
* giving up the events lock very quickly, giving the high-priority
* libusb_close() operation a "free ride" to acquire the events lock. All
* threads that are competing to do event handling become event waiters.
* -# With the events lock held inside libusb_close(), libusb can safely remove
* a file descriptor from the poll set, in the safety of knowledge that
* nobody is polling those descriptors or trying to access the poll set.
* -# After obtaining the events lock, the close operation completes very
* quickly (usually a matter of milliseconds) and then immediately releases
* the events lock.
* -# At the same time, the behaviour of libusb_event_handling_ok() and friends
* reverts to the original, documented behaviour.
* -# The release of the events lock causes the threads that are waiting for
* events to be woken up and to start competing to become event handlers
* again. One of them will succeed; it will then re-obtain the list of poll
* descriptors, and USB I/O will then continue as normal.
*
* libusb_open() is similar, and is actually a more simplistic case. Upon a
* call to libusb_open():
*
* -# The device is opened and a file descriptor is added to the poll set.
* -# libusb sends some dummy data on the event pipe, and records that it
* is trying to modify the poll descriptor set.
* -# The event handler is interrupted, and the same behaviour change as for
* libusb_close() takes effect, causing all event handling threads to become
* event waiters.
* -# The libusb_open() implementation takes its free ride to the events lock.
* -# Happy that it has successfully paused the events handler, libusb_open()
* releases the events lock.
* -# The event waiter threads are all woken up and compete to become event
* handlers again. The one that succeeds will obtain the list of poll
* descriptors again, which will include the addition of the new device.
*
* \subsection concl Closing remarks
*
* The above may seem a little complicated, but hopefully I have made it clear
* why such complications are necessary. Also, do not forget that this only
* applies to applications that take libusb's file descriptors and integrate
* them into their own polling loops.
*
* You may decide that it is OK for your multi-threaded application to ignore
* some of the rules and locks detailed above, because you don't think that
* two threads can ever be polling the descriptors at the same time. If that
* is the case, then that's good news for you because you don't have to worry.
* But be careful here; remember that the synchronous I/O functions do event
* handling internally. If you have one thread doing event handling in a loop
* (without implementing the rules and locking semantics documented above)
* and another trying to send a synchronous USB transfer, you will end up with
* two threads monitoring the same descriptors, and the above-described
* undesirable behaviour occurring. The solution is for your polling thread to
* play by the rules; the synchronous I/O functions do so, and this will result
* in them getting along in perfect harmony.
*
* If you do have a dedicated thread doing event handling, it is perfectly
* legal for it to take the event handling lock for long periods of time. Any
* synchronous I/O functions you call from other threads will transparently
* fall back to the "event waiters" mechanism detailed above. The only
* consideration that your event handling thread must apply is the one related
* to libusb_event_handling_ok(): you must call this before every poll(), and
* give up the events lock if instructed.
*/
int usbi_io_init(struct libusb_context *ctx)
{
int r;
usbi_mutex_init(&ctx->flying_transfers_lock);
usbi_mutex_init(&ctx->events_lock);
usbi_mutex_init(&ctx->event_waiters_lock);
usbi_cond_init(&ctx->event_waiters_cond);
usbi_mutex_init(&ctx->event_data_lock);
usbi_tls_key_create(&ctx->event_handling_key);
list_init(&ctx->flying_transfers);
list_init(&ctx->ipollfds);
list_init(&ctx->removed_ipollfds);
list_init(&ctx->hotplug_msgs);
list_init(&ctx->completed_transfers);
/* FIXME should use an eventfd on kernels that support it */
r = usbi_pipe(ctx->event_pipe);
if (r < 0) {
r = LIBUSB_ERROR_OTHER;
goto err;
}
r = usbi_add_pollfd(ctx, ctx->event_pipe[0], POLLIN);
if (r < 0)
goto err_close_pipe;
#ifdef USBI_TIMERFD_AVAILABLE
ctx->timerfd = timerfd_create(usbi_backend.get_timerfd_clockid(),
TFD_NONBLOCK | TFD_CLOEXEC);
if (ctx->timerfd >= 0) {
usbi_dbg("using timerfd for timeouts");
r = usbi_add_pollfd(ctx, ctx->timerfd, POLLIN);
if (r < 0)
goto err_close_timerfd;
} else {
usbi_dbg("timerfd not available, errno=%d", errno);
}
#endif
return 0;
#ifdef USBI_TIMERFD_AVAILABLE
err_close_timerfd:
close(ctx->timerfd);
usbi_remove_pollfd(ctx, ctx->event_pipe[0]);
#endif
err_close_pipe:
usbi_close(ctx->event_pipe[0]);
usbi_close(ctx->event_pipe[1]);
err:
usbi_mutex_destroy(&ctx->flying_transfers_lock);
usbi_mutex_destroy(&ctx->events_lock);
usbi_mutex_destroy(&ctx->event_waiters_lock);
usbi_cond_destroy(&ctx->event_waiters_cond);
usbi_mutex_destroy(&ctx->event_data_lock);
usbi_tls_key_delete(ctx->event_handling_key);
return r;
}
static void cleanup_removed_pollfds(struct libusb_context *ctx)
{
struct usbi_pollfd *ipollfd, *tmp;
list_for_each_entry_safe(ipollfd, tmp, &ctx->removed_ipollfds, list, struct usbi_pollfd) {
list_del(&ipollfd->list);
free(ipollfd);
}
}
void usbi_io_exit(struct libusb_context *ctx)
{
usbi_remove_pollfd(ctx, ctx->event_pipe[0]);
usbi_close(ctx->event_pipe[0]);
usbi_close(ctx->event_pipe[1]);
#ifdef USBI_TIMERFD_AVAILABLE
if (usbi_using_timerfd(ctx)) {
usbi_remove_pollfd(ctx, ctx->timerfd);
close(ctx->timerfd);
}
#endif
usbi_mutex_destroy(&ctx->flying_transfers_lock);
usbi_mutex_destroy(&ctx->events_lock);
usbi_mutex_destroy(&ctx->event_waiters_lock);
usbi_cond_destroy(&ctx->event_waiters_cond);
usbi_mutex_destroy(&ctx->event_data_lock);
usbi_tls_key_delete(ctx->event_handling_key);
free(ctx->pollfds);
cleanup_removed_pollfds(ctx);
}
static int calculate_timeout(struct usbi_transfer *transfer)
{
int r;
struct timespec current_time;
unsigned int timeout =
USBI_TRANSFER_TO_LIBUSB_TRANSFER(transfer)->timeout;
if (!timeout) {
timerclear(&transfer->timeout);
return 0;
}
r = usbi_backend.clock_gettime(USBI_CLOCK_MONOTONIC, &current_time);
if (r < 0) {
usbi_err(ITRANSFER_CTX(transfer),
"failed to read monotonic clock, errno=%d", errno);
return r;
}
current_time.tv_sec += timeout / 1000;
current_time.tv_nsec += (timeout % 1000) * 1000000;
while (current_time.tv_nsec >= 1000000000) {
current_time.tv_nsec -= 1000000000;
current_time.tv_sec++;
}
TIMESPEC_TO_TIMEVAL(&transfer->timeout, &current_time);
return 0;
}
/** \ingroup libusb_asyncio
* Allocate a libusb transfer with a specified number of isochronous packet
* descriptors. The returned transfer is pre-initialized for you. When the new
* transfer is no longer needed, it should be freed with
* libusb_free_transfer().
*
* Transfers intended for non-isochronous endpoints (e.g. control, bulk,
* interrupt) should specify an iso_packets count of zero.
*
* For transfers intended for isochronous endpoints, specify an appropriate
* number of packet descriptors to be allocated as part of the transfer.
* The returned transfer is not specially initialized for isochronous I/O;
* you are still required to set the
* \ref libusb_transfer::num_iso_packets "num_iso_packets" and
* \ref libusb_transfer::type "type" fields accordingly.
*
* It is safe to allocate a transfer with some isochronous packets and then
* use it on a non-isochronous endpoint. If you do this, ensure that at time
* of submission, num_iso_packets is 0 and that type is set appropriately.
*
* \param iso_packets number of isochronous packet descriptors to allocate. Must be non-negative.
* \returns a newly allocated transfer, or NULL on error
*/
DEFAULT_VISIBILITY
struct libusb_transfer * LIBUSB_CALL libusb_alloc_transfer(
int iso_packets)
{
struct libusb_transfer *transfer;
size_t os_alloc_size;
size_t alloc_size;
struct usbi_transfer *itransfer;
assert(iso_packets >= 0);
os_alloc_size = usbi_backend.transfer_priv_size;
alloc_size = sizeof(struct usbi_transfer)
+ sizeof(struct libusb_transfer)
+ (sizeof(struct libusb_iso_packet_descriptor) * (size_t)iso_packets)
+ os_alloc_size;
itransfer = calloc(1, alloc_size);
if (!itransfer)
return NULL;
itransfer->num_iso_packets = iso_packets;
usbi_mutex_init(&itransfer->lock);
transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
usbi_dbg("transfer %p", transfer);
return transfer;
}
/** \ingroup libusb_asyncio
* Free a transfer structure. This should be called for all transfers
* allocated with libusb_alloc_transfer().
*
* If the \ref libusb_transfer_flags::LIBUSB_TRANSFER_FREE_BUFFER
* "LIBUSB_TRANSFER_FREE_BUFFER" flag is set and the transfer buffer is
* non-NULL, this function will also free the transfer buffer using the
* standard system memory allocator (e.g. free()).
*
* It is legal to call this function with a NULL transfer. In this case,
* the function will simply return safely.
*
* It is not legal to free an active transfer (one which has been submitted
* and has not yet completed).
*
* \param transfer the transfer to free
*/
void API_EXPORTED libusb_free_transfer(struct libusb_transfer *transfer)
{
struct usbi_transfer *itransfer;
if (!transfer)
return;
usbi_dbg("transfer %p", transfer);
if (transfer->flags & LIBUSB_TRANSFER_FREE_BUFFER)
free(transfer->buffer);
itransfer = LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer);
usbi_mutex_destroy(&itransfer->lock);
free(itransfer);
}
#ifdef USBI_TIMERFD_AVAILABLE
static int disarm_timerfd(struct libusb_context *ctx)
{
const struct itimerspec disarm_timer = { { 0, 0 }, { 0, 0 } };
int r;
usbi_dbg(" ");
r = timerfd_settime(ctx->timerfd, 0, &disarm_timer, NULL);
if (r < 0)
return LIBUSB_ERROR_OTHER;
else
return 0;
}
/* iterates through the flying transfers, and rearms the timerfd based on the
* next upcoming timeout.
* must be called with flying_list locked.
* returns 0 on success or a LIBUSB_ERROR code on failure.
*/
static int arm_timerfd_for_next_timeout(struct libusb_context *ctx)
{
struct usbi_transfer *transfer;
list_for_each_entry(transfer, &ctx->flying_transfers, list, struct usbi_transfer) {
struct timeval *cur_tv = &transfer->timeout;
/* if we've reached transfers of infinite timeout, then we have no
* arming to do */
if (!timerisset(cur_tv))
goto disarm;
/* act on first transfer that has not already been handled */
if (!(transfer->timeout_flags & (USBI_TRANSFER_TIMEOUT_HANDLED | USBI_TRANSFER_OS_HANDLES_TIMEOUT))) {
int r;
const struct itimerspec it = { {0, 0},
{ cur_tv->tv_sec, cur_tv->tv_usec * 1000 } };
usbi_dbg("next timeout originally %dms", USBI_TRANSFER_TO_LIBUSB_TRANSFER(transfer)->timeout);
r = timerfd_settime(ctx->timerfd, TFD_TIMER_ABSTIME, &it, NULL);
if (r < 0)
return LIBUSB_ERROR_OTHER;
return 0;
}
}
disarm:
return disarm_timerfd(ctx);
}
#else
static int arm_timerfd_for_next_timeout(struct libusb_context *ctx)
{
UNUSED(ctx);
return 0;
}
#endif
/* add a transfer to the (timeout-sorted) active transfers list.
* This function will return non 0 if fails to update the timer,
* in which case the transfer is *not* on the flying_transfers list. */
static int add_to_flying_list(struct usbi_transfer *transfer)
{
struct usbi_transfer *cur;
struct timeval *timeout = &transfer->timeout;
struct libusb_context *ctx = ITRANSFER_CTX(transfer);
int r;
int first = 1;
r = calculate_timeout(transfer);
if (r)
return r;
/* if we have no other flying transfers, start the list with this one */
if (list_empty(&ctx->flying_transfers)) {
list_add(&transfer->list, &ctx->flying_transfers);
goto out;
}
/* if we have infinite timeout, append to end of list */
if (!timerisset(timeout)) {
list_add_tail(&transfer->list, &ctx->flying_transfers);
/* first is irrelevant in this case */
goto out;
}
/* otherwise, find appropriate place in list */
list_for_each_entry(cur, &ctx->flying_transfers, list, struct usbi_transfer) {
/* find first timeout that occurs after the transfer in question */
struct timeval *cur_tv = &cur->timeout;
if (!timerisset(cur_tv) || (cur_tv->tv_sec > timeout->tv_sec) ||
(cur_tv->tv_sec == timeout->tv_sec &&
cur_tv->tv_usec > timeout->tv_usec)) {
list_add_tail(&transfer->list, &cur->list);
goto out;
}
first = 0;
}
/* first is 0 at this stage (list not empty) */
/* otherwise we need to be inserted at the end */
list_add_tail(&transfer->list, &ctx->flying_transfers);
out:
#ifdef USBI_TIMERFD_AVAILABLE
if (first && usbi_using_timerfd(ctx) && timerisset(timeout)) {
/* if this transfer has the lowest timeout of all active transfers,
* rearm the timerfd with this transfer's timeout */
const struct itimerspec it = { {0, 0},
{ timeout->tv_sec, timeout->tv_usec * 1000 } };
usbi_dbg("arm timerfd for timeout in %dms (first in line)",
USBI_TRANSFER_TO_LIBUSB_TRANSFER(transfer)->timeout);
r = timerfd_settime(ctx->timerfd, TFD_TIMER_ABSTIME, &it, NULL);
if (r < 0) {
usbi_warn(ctx, "failed to arm first timerfd, errno=%d", errno);
r = LIBUSB_ERROR_OTHER;
}
}
#else
UNUSED(first);
#endif
if (r)
list_del(&transfer->list);
return r;
}
/* remove a transfer from the active transfers list.
* This function will *always* remove the transfer from the
* flying_transfers list. It will return a LIBUSB_ERROR code
* if it fails to update the timer for the next timeout. */
static int remove_from_flying_list(struct usbi_transfer *transfer)
{
struct libusb_context *ctx = ITRANSFER_CTX(transfer);
int rearm_timerfd;
int r = 0;
usbi_mutex_lock(&ctx->flying_transfers_lock);
rearm_timerfd = (timerisset(&transfer->timeout) &&
list_first_entry(&ctx->flying_transfers, struct usbi_transfer, list) == transfer);
list_del(&transfer->list);
if (usbi_using_timerfd(ctx) && rearm_timerfd)
r = arm_timerfd_for_next_timeout(ctx);
usbi_mutex_unlock(&ctx->flying_transfers_lock);
return r;
}
/** \ingroup libusb_asyncio
* Submit a transfer. This function will fire off the USB transfer and then
* return immediately.
*
* \param transfer the transfer to submit
* \returns 0 on success
* \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
* \returns LIBUSB_ERROR_BUSY if the transfer has already been submitted.
* \returns LIBUSB_ERROR_NOT_SUPPORTED if the transfer flags are not supported
* by the operating system.
* \returns LIBUSB_ERROR_INVALID_PARAM if the transfer size is larger than
* the operating system and/or hardware can support
* \returns another LIBUSB_ERROR code on other failure
*/
int API_EXPORTED libusb_submit_transfer(struct libusb_transfer *transfer)
{
struct usbi_transfer *itransfer =
LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer);
struct libusb_context *ctx = TRANSFER_CTX(transfer);
int r;
usbi_dbg("transfer %p", transfer);
/*
* Important note on locking, this function takes / releases locks
* in the following order:
* take flying_transfers_lock
* take itransfer->lock
* clear transfer
* add to flying_transfers list
* release flying_transfers_lock
* submit transfer
* release itransfer->lock
* if submit failed:
* take flying_transfers_lock
* remove from flying_transfers list
* release flying_transfers_lock
*
* Note that it takes locks in the order a-b and then releases them
* in the same order a-b. This is somewhat unusual but not wrong,
* release order is not important as long as *all* locks are released
* before re-acquiring any locks.
*
* This means that the ordering of first releasing itransfer->lock
* and then re-acquiring the flying_transfers_list on error is
* important and must not be changed!
*
* This is done this way because when we take both locks we must always
* take flying_transfers_lock first to avoid ab-ba style deadlocks with
* the timeout handling and usbi_handle_disconnect paths.
*
* And we cannot release itransfer->lock before the submission is
* complete otherwise timeout handling for transfers with short
* timeouts may run before submission.
*/
usbi_mutex_lock(&ctx->flying_transfers_lock);
usbi_mutex_lock(&itransfer->lock);
if (itransfer->state_flags & USBI_TRANSFER_IN_FLIGHT) {
usbi_mutex_unlock(&ctx->flying_transfers_lock);
usbi_mutex_unlock(&itransfer->lock);
return LIBUSB_ERROR_BUSY;
}
itransfer->transferred = 0;
itransfer->state_flags = 0;
itransfer->timeout_flags = 0;
r = add_to_flying_list(itransfer);
if (r) {
usbi_mutex_unlock(&ctx->flying_transfers_lock);
usbi_mutex_unlock(&itransfer->lock);
return r;
}
/*
* We must release the flying transfers lock here, because with
* some backends the submit_transfer method is synchroneous.
*/
usbi_mutex_unlock(&ctx->flying_transfers_lock);
r = usbi_backend.submit_transfer(itransfer);
if (r == LIBUSB_SUCCESS) {
itransfer->state_flags |= USBI_TRANSFER_IN_FLIGHT;
/* keep a reference to this device */
libusb_ref_device(transfer->dev_handle->dev);
}
usbi_mutex_unlock(&itransfer->lock);
if (r != LIBUSB_SUCCESS)
remove_from_flying_list(itransfer);
return r;
}
/** \ingroup libusb_asyncio
* Asynchronously cancel a previously submitted transfer.
* This function returns immediately, but this does not indicate cancellation
* is complete. Your callback function will be invoked at some later time
* with a transfer status of
* \ref libusb_transfer_status::LIBUSB_TRANSFER_CANCELLED
* "LIBUSB_TRANSFER_CANCELLED."
*
* \param transfer the transfer to cancel
* \returns 0 on success
* \returns LIBUSB_ERROR_NOT_FOUND if the transfer is not in progress,
* already complete, or already cancelled.
* \returns a LIBUSB_ERROR code on failure
*/
int API_EXPORTED libusb_cancel_transfer(struct libusb_transfer *transfer)
{
struct usbi_transfer *itransfer =
LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer);
int r;
usbi_dbg("transfer %p", transfer );
usbi_mutex_lock(&itransfer->lock);
if (!(itransfer->state_flags & USBI_TRANSFER_IN_FLIGHT)
|| (itransfer->state_flags & USBI_TRANSFER_CANCELLING)) {
r = LIBUSB_ERROR_NOT_FOUND;
goto out;
}
r = usbi_backend.cancel_transfer(itransfer);
if (r < 0) {
if (r != LIBUSB_ERROR_NOT_FOUND &&
r != LIBUSB_ERROR_NO_DEVICE)
usbi_err(TRANSFER_CTX(transfer),
"cancel transfer failed error %d", r);
else
usbi_dbg("cancel transfer failed error %d", r);
if (r == LIBUSB_ERROR_NO_DEVICE)
itransfer->state_flags |= USBI_TRANSFER_DEVICE_DISAPPEARED;
}
itransfer->state_flags |= USBI_TRANSFER_CANCELLING;
out:
usbi_mutex_unlock(&itransfer->lock);
return r;
}
/** \ingroup libusb_asyncio
* Set a transfers bulk stream id. Note users are advised to use
* libusb_fill_bulk_stream_transfer() instead of calling this function
* directly.
*
* Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103
*
* \param transfer the transfer to set the stream id for
* \param stream_id the stream id to set
* \see libusb_alloc_streams()
*/
void API_EXPORTED libusb_transfer_set_stream_id(
struct libusb_transfer *transfer, uint32_t stream_id)
{
struct usbi_transfer *itransfer =
LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer);
itransfer->stream_id = stream_id;
}
/** \ingroup libusb_asyncio
* Get a transfers bulk stream id.
*
* Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103
*
* \param transfer the transfer to get the stream id for
* \returns the stream id for the transfer
*/
uint32_t API_EXPORTED libusb_transfer_get_stream_id(
struct libusb_transfer *transfer)
{
struct usbi_transfer *itransfer =
LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer);
return itransfer->stream_id;
}
/* Handle completion of a transfer (completion might be an error condition).
* This will invoke the user-supplied callback function, which may end up
* freeing the transfer. Therefore you cannot use the transfer structure
* after calling this function, and you should free all backend-specific
* data before calling it.
* Do not call this function with the usbi_transfer lock held. User-specified
* callback functions may attempt to directly resubmit the transfer, which
* will attempt to take the lock. */
int usbi_handle_transfer_completion(struct usbi_transfer *itransfer,
enum libusb_transfer_status status)
{
struct libusb_transfer *transfer =
USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
struct libusb_device_handle *dev_handle = transfer->dev_handle;
uint8_t flags;
int r;
r = remove_from_flying_list(itransfer);
if (r < 0)
usbi_err(ITRANSFER_CTX(itransfer), "failed to set timer for next timeout, errno=%d", errno);
usbi_mutex_lock(&itransfer->lock);
itransfer->state_flags &= ~USBI_TRANSFER_IN_FLIGHT;
usbi_mutex_unlock(&itransfer->lock);
if (status == LIBUSB_TRANSFER_COMPLETED
&& transfer->flags & LIBUSB_TRANSFER_SHORT_NOT_OK) {
int rqlen = transfer->length;
if (transfer->type == LIBUSB_TRANSFER_TYPE_CONTROL)
rqlen -= LIBUSB_CONTROL_SETUP_SIZE;
if (rqlen != itransfer->transferred) {
usbi_dbg("interpreting short transfer as error");
status = LIBUSB_TRANSFER_ERROR;
}
}
flags = transfer->flags;
transfer->status = status;
transfer->actual_length = itransfer->transferred;
usbi_dbg("transfer %p has callback %p", transfer, transfer->callback);
if (transfer->callback)
transfer->callback(transfer);
/* transfer might have been freed by the above call, do not use from
* this point. */
if (flags & LIBUSB_TRANSFER_FREE_TRANSFER)
libusb_free_transfer(transfer);
libusb_unref_device(dev_handle->dev);
return r;
}
/* Similar to usbi_handle_transfer_completion() but exclusively for transfers
* that were asynchronously cancelled. The same concerns w.r.t. freeing of
* transfers exist here.
* Do not call this function with the usbi_transfer lock held. User-specified
* callback functions may attempt to directly resubmit the transfer, which
* will attempt to take the lock. */
int usbi_handle_transfer_cancellation(struct usbi_transfer *transfer)
{
struct libusb_context *ctx = ITRANSFER_CTX(transfer);
uint8_t timed_out;
usbi_mutex_lock(&ctx->flying_transfers_lock);
timed_out = transfer->timeout_flags & USBI_TRANSFER_TIMED_OUT;
usbi_mutex_unlock(&ctx->flying_transfers_lock);
/* if the URB was cancelled due to timeout, report timeout to the user */
if (timed_out) {
usbi_dbg("detected timeout cancellation");
return usbi_handle_transfer_completion(transfer, LIBUSB_TRANSFER_TIMED_OUT);
}
/* otherwise its a normal async cancel */
return usbi_handle_transfer_completion(transfer, LIBUSB_TRANSFER_CANCELLED);
}
/* Add a completed transfer to the completed_transfers list of the
* context and signal the event. The backend's handle_transfer_completion()
* function will be called the next time an event handler runs. */
void usbi_signal_transfer_completion(struct usbi_transfer *transfer)
{
libusb_device_handle *dev_handle = USBI_TRANSFER_TO_LIBUSB_TRANSFER(transfer)->dev_handle;
if (dev_handle) {
struct libusb_context *ctx = HANDLE_CTX(dev_handle);
int pending_events;
usbi_mutex_lock(&ctx->event_data_lock);
pending_events = usbi_pending_events(ctx);
list_add_tail(&transfer->completed_list, &ctx->completed_transfers);
if (!pending_events)
usbi_signal_event(ctx);
usbi_mutex_unlock(&ctx->event_data_lock);
}
}
/** \ingroup libusb_poll
* Attempt to acquire the event handling lock. This lock is used to ensure that
* only one thread is monitoring libusb event sources at any one time.
*
* You only need to use this lock if you are developing an application
* which calls poll() or select() on libusb's file descriptors directly.
* If you stick to libusb's event handling loop functions (e.g.
* libusb_handle_events()) then you do not need to be concerned with this
* locking.
*
* While holding this lock, you are trusted to actually be handling events.
* If you are no longer handling events, you must call libusb_unlock_events()
* as soon as possible.
*
* \param ctx the context to operate on, or NULL for the default context
* \returns 0 if the lock was obtained successfully
* \returns 1 if the lock was not obtained (i.e. another thread holds the lock)
* \ref libusb_mtasync
*/
int API_EXPORTED libusb_try_lock_events(libusb_context *ctx)
{
int r;
unsigned int ru;
USBI_GET_CONTEXT(ctx);
/* is someone else waiting to close a device? if so, don't let this thread
* start event handling */
usbi_mutex_lock(&ctx->event_data_lock);
ru = ctx->device_close;
usbi_mutex_unlock(&ctx->event_data_lock);
if (ru) {
usbi_dbg("someone else is closing a device");
return 1;
}
r = usbi_mutex_trylock(&ctx->events_lock);
if (r)
return 1;
ctx->event_handler_active = 1;
return 0;
}
/** \ingroup libusb_poll
* Acquire the event handling lock, blocking until successful acquisition if
* it is contended. This lock is used to ensure that only one thread is
* monitoring libusb event sources at any one time.
*
* You only need to use this lock if you are developing an application
* which calls poll() or select() on libusb's file descriptors directly.
* If you stick to libusb's event handling loop functions (e.g.
* libusb_handle_events()) then you do not need to be concerned with this
* locking.
*
* While holding this lock, you are trusted to actually be handling events.
* If you are no longer handling events, you must call libusb_unlock_events()
* as soon as possible.
*
* \param ctx the context to operate on, or NULL for the default context
* \ref libusb_mtasync
*/
void API_EXPORTED libusb_lock_events(libusb_context *ctx)
{
USBI_GET_CONTEXT(ctx);
usbi_mutex_lock(&ctx->events_lock);
ctx->event_handler_active = 1;
}
/** \ingroup libusb_poll
* Release the lock previously acquired with libusb_try_lock_events() or
* libusb_lock_events(). Releasing this lock will wake up any threads blocked
* on libusb_wait_for_event().
*
* \param ctx the context to operate on, or NULL for the default context
* \ref libusb_mtasync
*/
void API_EXPORTED libusb_unlock_events(libusb_context *ctx)
{
USBI_GET_CONTEXT(ctx);
ctx->event_handler_active = 0;
usbi_mutex_unlock(&ctx->events_lock);
/* FIXME: perhaps we should be a bit more efficient by not broadcasting
* the availability of the events lock when we are modifying pollfds
* (check ctx->device_close)? */
usbi_mutex_lock(&ctx->event_waiters_lock);
usbi_cond_broadcast(&ctx->event_waiters_cond);
usbi_mutex_unlock(&ctx->event_waiters_lock);
}
/** \ingroup libusb_poll
* Determine if it is still OK for this thread to be doing event handling.
*
* Sometimes, libusb needs to temporarily pause all event handlers, and this
* is the function you should use before polling file descriptors to see if
* this is the case.
*
* If this function instructs your thread to give up the events lock, you
* should just continue the usual logic that is documented in \ref libusb_mtasync.
* On the next iteration, your thread will fail to obtain the events lock,
* and will hence become an event waiter.
*
* This function should be called while the events lock is held: you don't
* need to worry about the results of this function if your thread is not
* the current event handler.
*
* \param ctx the context to operate on, or NULL for the default context
* \returns 1 if event handling can start or continue
* \returns 0 if this thread must give up the events lock
* \ref fullstory "Multi-threaded I/O: the full story"
*/
int API_EXPORTED libusb_event_handling_ok(libusb_context *ctx)
{
unsigned int r;
USBI_GET_CONTEXT(ctx);
/* is someone else waiting to close a device? if so, don't let this thread
* continue event handling */
usbi_mutex_lock(&ctx->event_data_lock);
r = ctx->device_close;
usbi_mutex_unlock(&ctx->event_data_lock);
if (r) {
usbi_dbg("someone else is closing a device");
return 0;
}
return 1;
}
/** \ingroup libusb_poll
* Determine if an active thread is handling events (i.e. if anyone is holding
* the event handling lock).
*
* \param ctx the context to operate on, or NULL for the default context
* \returns 1 if a thread is handling events
* \returns 0 if there are no threads currently handling events
* \ref libusb_mtasync
*/
int API_EXPORTED libusb_event_handler_active(libusb_context *ctx)
{
unsigned int r;
USBI_GET_CONTEXT(ctx);
/* is someone else waiting to close a device? if so, don't let this thread
* start event handling -- indicate that event handling is happening */
usbi_mutex_lock(&ctx->event_data_lock);
r = ctx->device_close;
usbi_mutex_unlock(&ctx->event_data_lock);
if (r) {
usbi_dbg("someone else is closing a device");
return 1;
}
return ctx->event_handler_active;
}
/** \ingroup libusb_poll
* Interrupt any active thread that is handling events. This is mainly useful
* for interrupting a dedicated event handling thread when an application
* wishes to call libusb_exit().
*
* Since version 1.0.21, \ref LIBUSB_API_VERSION >= 0x01000105
*
* \param ctx the context to operate on, or NULL for the default context
* \ref libusb_mtasync
*/
void API_EXPORTED libusb_interrupt_event_handler(libusb_context *ctx)
{
int pending_events;
USBI_GET_CONTEXT(ctx);
usbi_dbg(" ");
usbi_mutex_lock(&ctx->event_data_lock);
pending_events = usbi_pending_events(ctx);
ctx->event_flags |= USBI_EVENT_USER_INTERRUPT;
if (!pending_events)
usbi_signal_event(ctx);
usbi_mutex_unlock(&ctx->event_data_lock);
}
/** \ingroup libusb_poll
* Acquire the event waiters lock. This lock is designed to be obtained under
* the situation where you want to be aware when events are completed, but
* some other thread is event handling so calling libusb_handle_events() is not
* allowed.
*
* You then obtain this lock, re-check that another thread is still handling
* events, then call libusb_wait_for_event().
*
* You only need to use this lock if you are developing an application
* which calls poll() or select() on libusb's file descriptors directly,
* <b>and</b> may potentially be handling events from 2 threads simultaenously.
* If you stick to libusb's event handling loop functions (e.g.
* libusb_handle_events()) then you do not need to be concerned with this
* locking.
*
* \param ctx the context to operate on, or NULL for the default context
* \ref libusb_mtasync
*/
void API_EXPORTED libusb_lock_event_waiters(libusb_context *ctx)
{
USBI_GET_CONTEXT(ctx);
usbi_mutex_lock(&ctx->event_waiters_lock);
}
/** \ingroup libusb_poll
* Release the event waiters lock.
* \param ctx the context to operate on, or NULL for the default context
* \ref libusb_mtasync
*/
void API_EXPORTED libusb_unlock_event_waiters(libusb_context *ctx)
{
USBI_GET_CONTEXT(ctx);
usbi_mutex_unlock(&ctx->event_waiters_lock);
}
/** \ingroup libusb_poll
* Wait for another thread to signal completion of an event. Must be called
* with the event waiters lock held, see libusb_lock_event_waiters().
*
* This function will block until any of the following conditions are met:
* -# The timeout expires
* -# A transfer completes
* -# A thread releases the event handling lock through libusb_unlock_events()
*
* Condition 1 is obvious. Condition 2 unblocks your thread <em>after</em>
* the callback for the transfer has completed. Condition 3 is important
* because it means that the thread that was previously handling events is no
* longer doing so, so if any events are to complete, another thread needs to
* step up and start event handling.
*
* This function releases the event waiters lock before putting your thread
* to sleep, and reacquires the lock as it is being woken up.
*
* \param ctx the context to operate on, or NULL for the default context
* \param tv maximum timeout for this blocking function. A NULL value
* indicates unlimited timeout.
* \returns 0 after a transfer completes or another thread stops event handling
* \returns 1 if the timeout expired
* \ref libusb_mtasync
*/
int API_EXPORTED libusb_wait_for_event(libusb_context *ctx, struct timeval *tv)
{
int r;
USBI_GET_CONTEXT(ctx);
if (tv == NULL) {
usbi_cond_wait(&ctx->event_waiters_cond, &ctx->event_waiters_lock);
return 0;
}
r = usbi_cond_timedwait(&ctx->event_waiters_cond,
&ctx->event_waiters_lock, tv);
if (r < 0)
return r;
else
return (r == ETIMEDOUT);
}
static void handle_timeout(struct usbi_transfer *itransfer)
{
struct libusb_transfer *transfer =
USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
int r;
itransfer->timeout_flags |= USBI_TRANSFER_TIMEOUT_HANDLED;
r = libusb_cancel_transfer(transfer);
if (r == LIBUSB_SUCCESS)
itransfer->timeout_flags |= USBI_TRANSFER_TIMED_OUT;
else
usbi_warn(TRANSFER_CTX(transfer),
"async cancel failed %d errno=%d", r, errno);
}
static int handle_timeouts_locked(struct libusb_context *ctx)
{
int r;
struct timespec systime_ts;
struct timeval systime;
struct usbi_transfer *transfer;
if (list_empty(&ctx->flying_transfers))
return 0;
/* get current time */
r = usbi_backend.clock_gettime(USBI_CLOCK_MONOTONIC, &systime_ts);
if (r < 0)
return r;
TIMESPEC_TO_TIMEVAL(&systime, &systime_ts);
/* iterate through flying transfers list, finding all transfers that
* have expired timeouts */
list_for_each_entry(transfer, &ctx->flying_transfers, list, struct usbi_transfer) {
struct timeval *cur_tv = &transfer->timeout;
/* if we've reached transfers of infinite timeout, we're all done */
if (!timerisset(cur_tv))
return 0;
/* ignore timeouts we've already handled */
if (transfer->timeout_flags & (USBI_TRANSFER_TIMEOUT_HANDLED | USBI_TRANSFER_OS_HANDLES_TIMEOUT))
continue;
/* if transfer has non-expired timeout, nothing more to do */
if ((cur_tv->tv_sec > systime.tv_sec) ||
(cur_tv->tv_sec == systime.tv_sec &&
cur_tv->tv_usec > systime.tv_usec))
return 0;
/* otherwise, we've got an expired timeout to handle */
handle_timeout(transfer);
}
return 0;
}
static int handle_timeouts(struct libusb_context *ctx)
{
int r;
USBI_GET_CONTEXT(ctx);
usbi_mutex_lock(&ctx->flying_transfers_lock);
r = handle_timeouts_locked(ctx);
usbi_mutex_unlock(&ctx->flying_transfers_lock);
return r;
}
#ifdef USBI_TIMERFD_AVAILABLE
static int handle_timerfd_trigger(struct libusb_context *ctx)
{
int r;
usbi_mutex_lock(&ctx->flying_transfers_lock);
/* process the timeout that just happened */
r = handle_timeouts_locked(ctx);
if (r < 0)
goto out;
/* arm for next timeout*/
r = arm_timerfd_for_next_timeout(ctx);
out:
usbi_mutex_unlock(&ctx->flying_transfers_lock);
return r;
}
#endif
/* do the actual event handling. assumes that no other thread is concurrently
* doing the same thing. */
static int handle_events(struct libusb_context *ctx, struct timeval *tv)
{
int r;
struct usbi_pollfd *ipollfd;
POLL_NFDS_TYPE nfds = 0;
POLL_NFDS_TYPE internal_nfds;
struct pollfd *fds = NULL;
int timeout_ms;
/* prevent attempts to recursively handle events (e.g. calling into
* libusb_handle_events() from within a hotplug or transfer callback) */
usbi_mutex_lock(&ctx->event_data_lock);
r = 0;
if (usbi_handling_events(ctx))
r = LIBUSB_ERROR_BUSY;
else
usbi_start_event_handling(ctx);
usbi_mutex_unlock(&ctx->event_data_lock);
if (r)
return r;
/* there are certain fds that libusb uses internally, currently:
*
* 1) event pipe
* 2) timerfd
*
* the backend will never need to attempt to handle events on these fds, so
* we determine how many fds are in use internally for this context and when
* handle_events() is called in the backend, the pollfd list and count will
* be adjusted to skip over these internal fds */
if (usbi_using_timerfd(ctx))
internal_nfds = 2;
else
internal_nfds = 1;
/* only reallocate the poll fds when the list of poll fds has been modified
* since the last poll, otherwise reuse them to save the additional overhead */
usbi_mutex_lock(&ctx->event_data_lock);
/* clean up removed poll fds */
cleanup_removed_pollfds(ctx);
if (ctx->event_flags & USBI_EVENT_POLLFDS_MODIFIED) {
int i = 0;
usbi_dbg("poll fds modified, reallocating");
free(ctx->pollfds);
ctx->pollfds = NULL;
/* sanity check - it is invalid for a context to have fewer than the
* required internal fds (memory corruption?) */
assert(ctx->pollfds_cnt >= internal_nfds);
ctx->pollfds = calloc(ctx->pollfds_cnt, sizeof(*ctx->pollfds));
if (!ctx->pollfds) {
usbi_mutex_unlock(&ctx->event_data_lock);
r = LIBUSB_ERROR_NO_MEM;
goto done;
}
list_for_each_entry(ipollfd, &ctx->ipollfds, list, struct usbi_pollfd) {
struct libusb_pollfd *pollfd = &ipollfd->pollfd;
ctx->pollfds[i].fd = pollfd->fd;
ctx->pollfds[i].events = pollfd->events;
i++;
}
/* reset the flag now that we have the updated list */
ctx->event_flags &= ~USBI_EVENT_POLLFDS_MODIFIED;
/* if no further pending events, clear the event pipe so that we do
* not immediately return from poll */
if (!usbi_pending_events(ctx))
usbi_clear_event(ctx);
}
fds = ctx->pollfds;
nfds = ctx->pollfds_cnt;
usbi_mutex_unlock(&ctx->event_data_lock);
timeout_ms = (int)(tv->tv_sec * 1000) + (tv->tv_usec / 1000);
/* round up to next millisecond */
if (tv->tv_usec % 1000)
timeout_ms++;
usbi_dbg("poll() %d fds with timeout in %dms", (int)nfds, timeout_ms);
r = usbi_poll(fds, nfds, timeout_ms);
usbi_dbg("poll() returned %d", r);
if (r == 0) {
r = handle_timeouts(ctx);
goto done;
} else if (r == -1 && errno == EINTR) {
r = LIBUSB_ERROR_INTERRUPTED;
goto done;
} else if (r < 0) {
usbi_err(ctx, "poll failed, errno=%d", errno);
r = LIBUSB_ERROR_IO;
goto done;
}
/* fds[0] is always the event pipe */
if (fds[0].revents) {
struct list_head hotplug_msgs;
struct usbi_transfer *itransfer;
int hotplug_cb_deregistered = 0;
int ret = 0;
list_init(&hotplug_msgs);
usbi_dbg("caught a fish on the event pipe");
/* take the the event data lock while processing events */
usbi_mutex_lock(&ctx->event_data_lock);
/* check if someone added a new poll fd */
if (ctx->event_flags & USBI_EVENT_POLLFDS_MODIFIED)
usbi_dbg("someone updated the poll fds");
if (ctx->event_flags & USBI_EVENT_USER_INTERRUPT) {
usbi_dbg("someone purposely interrupted");
ctx->event_flags &= ~USBI_EVENT_USER_INTERRUPT;
}
if (ctx->event_flags & USBI_EVENT_HOTPLUG_CB_DEREGISTERED) {
usbi_dbg("someone unregistered a hotplug cb");
ctx->event_flags &= ~USBI_EVENT_HOTPLUG_CB_DEREGISTERED;
hotplug_cb_deregistered = 1;
}
/* check if someone is closing a device */
if (ctx->device_close)
usbi_dbg("someone is closing a device");
/* check for any pending hotplug messages */
if (!list_empty(&ctx->hotplug_msgs)) {
usbi_dbg("hotplug message received");
list_cut(&hotplug_msgs, &ctx->hotplug_msgs);
}
/* complete any pending transfers */
while (ret == 0 && !list_empty(&ctx->completed_transfers)) {
itransfer = list_first_entry(&ctx->completed_transfers, struct usbi_transfer, completed_list);
list_del(&itransfer->completed_list);
usbi_mutex_unlock(&ctx->event_data_lock);
ret = usbi_backend.handle_transfer_completion(itransfer);
if (ret)
usbi_err(ctx, "backend handle_transfer_completion failed with error %d", ret);
usbi_mutex_lock(&ctx->event_data_lock);
}
/* if no further pending events, clear the event pipe */
if (!usbi_pending_events(ctx))
usbi_clear_event(ctx);
usbi_mutex_unlock(&ctx->event_data_lock);
if (hotplug_cb_deregistered)
usbi_hotplug_deregister(ctx, 0);
/* process the hotplug messages, if any */
while (!list_empty(&hotplug_msgs)) {
struct libusb_hotplug_message *message =
list_first_entry(&hotplug_msgs, struct libusb_hotplug_message, list);
usbi_hotplug_match(ctx, message->device, message->event);
/* the device left, dereference the device */
if (LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT == message->event)
libusb_unref_device(message->device);
list_del(&message->list);
free(message);
}
if (ret) {
/* return error code */
r = ret;
goto done;
}
if (0 == --r)
goto done;
}
#ifdef USBI_TIMERFD_AVAILABLE
/* on timerfd configurations, fds[1] is the timerfd */
if (usbi_using_timerfd(ctx) && fds[1].revents) {
/* timerfd indicates that a timeout has expired */
int ret;
usbi_dbg("timerfd triggered");
ret = handle_timerfd_trigger(ctx);
if (ret < 0) {
/* return error code */
r = ret;
goto done;
}
if (0 == --r)
goto done;
}
#endif
list_for_each_entry(ipollfd, &ctx->removed_ipollfds, list, struct usbi_pollfd) {
POLL_NFDS_TYPE n;
for (n = internal_nfds ; n < nfds ; n++) {
if (ipollfd->pollfd.fd == fds[n].fd) {
/* pollfd was removed between the creation of the fd
* array and here. remove any triggered revent as
* it is no longer relevant */
usbi_dbg("pollfd %d was removed. ignoring raised events",
fds[n].fd);
fds[n].revents = 0;
break;
}
}
}
r = usbi_backend.handle_events(ctx, fds + internal_nfds, nfds - internal_nfds, r);
if (r)
usbi_err(ctx, "backend handle_events failed with error %d", r);
done:
usbi_end_event_handling(ctx);
return r;
}
/* returns the smallest of:
* 1. timeout of next URB
* 2. user-supplied timeout
* returns 1 if there is an already-expired timeout, otherwise returns 0
* and populates out
*/
static int get_next_timeout(libusb_context *ctx, struct timeval *tv,
struct timeval *out)
{
struct timeval timeout;
int r = libusb_get_next_timeout(ctx, &timeout);
if (r) {
/* timeout already expired? */
if (!timerisset(&timeout))
return 1;
/* choose the smallest of next URB timeout or user specified timeout */
if (timercmp(&timeout, tv, <))
*out = timeout;
else
*out = *tv;
} else {
*out = *tv;
}
return 0;
}
/** \ingroup libusb_poll
* Handle any pending events.
*
* libusb determines "pending events" by checking if any timeouts have expired
* and by checking the set of file descriptors for activity.
*
* If a zero timeval is passed, this function will handle any already-pending
* events and then immediately return in non-blocking style.
*
* If a non-zero timeval is passed and no events are currently pending, this
* function will block waiting for events to handle up until the specified
* timeout. If an event arrives or a signal is raised, this function will
* return early.
*
* If the parameter completed is not NULL then <em>after obtaining the event
* handling lock</em> this function will return immediately if the integer
* pointed to is not 0. This allows for race free waiting for the completion
* of a specific transfer.
*
* \param ctx the context to operate on, or NULL for the default context
* \param tv the maximum time to block waiting for events, or an all zero
* timeval struct for non-blocking mode
* \param completed pointer to completion integer to check, or NULL
* \returns 0 on success, or a LIBUSB_ERROR code on failure
* \ref libusb_mtasync
*/
int API_EXPORTED libusb_handle_events_timeout_completed(libusb_context *ctx,
struct timeval *tv, int *completed)
{
int r;
struct timeval poll_timeout;
USBI_GET_CONTEXT(ctx);
r = get_next_timeout(ctx, tv, &poll_timeout);
if (r) {
/* timeout already expired */
return handle_timeouts(ctx);
}
retry:
if (libusb_try_lock_events(ctx) == 0) {
if (completed == NULL || !*completed) {
/* we obtained the event lock: do our own event handling */
usbi_dbg("doing our own event handling");
r = handle_events(ctx, &poll_timeout);
}
libusb_unlock_events(ctx);
return r;
}
/* another thread is doing event handling. wait for thread events that
* notify event completion. */
libusb_lock_event_waiters(ctx);
if (completed && *completed)
goto already_done;
if (!libusb_event_handler_active(ctx)) {
/* we hit a race: whoever was event handling earlier finished in the
* time it took us to reach this point. try the cycle again. */
libusb_unlock_event_waiters(ctx);
usbi_dbg("event handler was active but went away, retrying");
goto retry;
}
usbi_dbg("another thread is doing event handling");
r = libusb_wait_for_event(ctx, &poll_timeout);
already_done:
libusb_unlock_event_waiters(ctx);
if (r < 0)
return r;
else if (r == 1)
return handle_timeouts(ctx);
else
return 0;
}
/** \ingroup libusb_poll
* Handle any pending events
*
* Like libusb_handle_events_timeout_completed(), but without the completed
* parameter, calling this function is equivalent to calling
* libusb_handle_events_timeout_completed() with a NULL completed parameter.
*
* This function is kept primarily for backwards compatibility.
* All new code should call libusb_handle_events_completed() or
* libusb_handle_events_timeout_completed() to avoid race conditions.
*
* \param ctx the context to operate on, or NULL for the default context
* \param tv the maximum time to block waiting for events, or an all zero
* timeval struct for non-blocking mode
* \returns 0 on success, or a LIBUSB_ERROR code on failure
*/
int API_EXPORTED libusb_handle_events_timeout(libusb_context *ctx,
struct timeval *tv)
{
return libusb_handle_events_timeout_completed(ctx, tv, NULL);
}
/** \ingroup libusb_poll
* Handle any pending events in blocking mode. There is currently a timeout
* hardcoded at 60 seconds but we plan to make it unlimited in future. For
* finer control over whether this function is blocking or non-blocking, or
* for control over the timeout, use libusb_handle_events_timeout_completed()
* instead.
*
* This function is kept primarily for backwards compatibility.
* All new code should call libusb_handle_events_completed() or
* libusb_handle_events_timeout_completed() to avoid race conditions.
*
* \param ctx the context to operate on, or NULL for the default context
* \returns 0 on success, or a LIBUSB_ERROR code on failure
*/
int API_EXPORTED libusb_handle_events(libusb_context *ctx)
{
struct timeval tv;
tv.tv_sec = 60;
tv.tv_usec = 0;
return libusb_handle_events_timeout_completed(ctx, &tv, NULL);
}
/** \ingroup libusb_poll
* Handle any pending events in blocking mode.
*
* Like libusb_handle_events(), with the addition of a completed parameter
* to allow for race free waiting for the completion of a specific transfer.
*
* See libusb_handle_events_timeout_completed() for details on the completed
* parameter.
*
* \param ctx the context to operate on, or NULL for the default context
* \param completed pointer to completion integer to check, or NULL
* \returns 0 on success, or a LIBUSB_ERROR code on failure
* \ref libusb_mtasync
*/
int API_EXPORTED libusb_handle_events_completed(libusb_context *ctx,
int *completed)
{
struct timeval tv;
tv.tv_sec = 60;
tv.tv_usec = 0;
return libusb_handle_events_timeout_completed(ctx, &tv, completed);
}
/** \ingroup libusb_poll
* Handle any pending events by polling file descriptors, without checking if
* any other threads are already doing so. Must be called with the event lock
* held, see libusb_lock_events().
*
* This function is designed to be called under the situation where you have
* taken the event lock and are calling poll()/select() directly on libusb's
* file descriptors (as opposed to using libusb_handle_events() or similar).
* You detect events on libusb's descriptors, so you then call this function
* with a zero timeout value (while still holding the event lock).
*
* \param ctx the context to operate on, or NULL for the default context
* \param tv the maximum time to block waiting for events, or zero for
* non-blocking mode
* \returns 0 on success, or a LIBUSB_ERROR code on failure
* \ref libusb_mtasync
*/
int API_EXPORTED libusb_handle_events_locked(libusb_context *ctx,
struct timeval *tv)
{
int r;
struct timeval poll_timeout;
USBI_GET_CONTEXT(ctx);
r = get_next_timeout(ctx, tv, &poll_timeout);
if (r) {
/* timeout already expired */
return handle_timeouts(ctx);
}
return handle_events(ctx, &poll_timeout);
}
/** \ingroup libusb_poll
* Determines whether your application must apply special timing considerations
* when monitoring libusb's file descriptors.
*
* This function is only useful for applications which retrieve and poll
* libusb's file descriptors in their own main loop (\ref libusb_pollmain).
*
* Ordinarily, libusb's event handler needs to be called into at specific
* moments in time (in addition to times when there is activity on the file
* descriptor set). The usual approach is to use libusb_get_next_timeout()
* to learn about when the next timeout occurs, and to adjust your
* poll()/select() timeout accordingly so that you can make a call into the
* library at that time.
*
* Some platforms supported by libusb do not come with this baggage - any
* events relevant to timing will be represented by activity on the file
* descriptor set, and libusb_get_next_timeout() will always return 0.
* This function allows you to detect whether you are running on such a
* platform.
*
* Since v1.0.5.
*
* \param ctx the context to operate on, or NULL for the default context
* \returns 0 if you must call into libusb at times determined by
* libusb_get_next_timeout(), or 1 if all timeout events are handled internally
* or through regular activity on the file descriptors.
* \ref libusb_pollmain "Polling libusb file descriptors for event handling"
*/
int API_EXPORTED libusb_pollfds_handle_timeouts(libusb_context *ctx)
{
#if defined(USBI_TIMERFD_AVAILABLE)
USBI_GET_CONTEXT(ctx);
return usbi_using_timerfd(ctx);
#else
UNUSED(ctx);
return 0;
#endif
}
/** \ingroup libusb_poll
* Determine the next internal timeout that libusb needs to handle. You only
* need to use this function if you are calling poll() or select() or similar
* on libusb's file descriptors yourself - you do not need to use it if you
* are calling libusb_handle_events() or a variant directly.
*
* You should call this function in your main loop in order to determine how
* long to wait for select() or poll() to return results. libusb needs to be
* called into at this timeout, so you should use it as an upper bound on
* your select() or poll() call.
*
* When the timeout has expired, call into libusb_handle_events_timeout()
* (perhaps in non-blocking mode) so that libusb can handle the timeout.
*
* This function may return 1 (success) and an all-zero timeval. If this is
* the case, it indicates that libusb has a timeout that has already expired
* so you should call libusb_handle_events_timeout() or similar immediately.
* A return code of 0 indicates that there are no pending timeouts.
*
* On some platforms, this function will always returns 0 (no pending
* timeouts). See \ref polltime.
*
* \param ctx the context to operate on, or NULL for the default context
* \param tv output location for a relative time against the current
* clock in which libusb must be called into in order to process timeout events
* \returns 0 if there are no pending timeouts, 1 if a timeout was returned,
* or LIBUSB_ERROR_OTHER on failure
*/
int API_EXPORTED libusb_get_next_timeout(libusb_context *ctx,
struct timeval *tv)
{
struct usbi_transfer *transfer;
struct timespec cur_ts;
struct timeval cur_tv;
struct timeval next_timeout = { 0, 0 };
int r;
USBI_GET_CONTEXT(ctx);
if (usbi_using_timerfd(ctx))
return 0;
usbi_mutex_lock(&ctx->flying_transfers_lock);
if (list_empty(&ctx->flying_transfers)) {
usbi_mutex_unlock(&ctx->flying_transfers_lock);
usbi_dbg("no URBs, no timeout!");
return 0;
}
/* find next transfer which hasn't already been processed as timed out */
list_for_each_entry(transfer, &ctx->flying_transfers, list, struct usbi_transfer) {
if (transfer->timeout_flags & (USBI_TRANSFER_TIMEOUT_HANDLED | USBI_TRANSFER_OS_HANDLES_TIMEOUT))
continue;
/* if we've reached transfers of infinte timeout, we're done looking */
if (!timerisset(&transfer->timeout))
break;
next_timeout = transfer->timeout;
break;
}
usbi_mutex_unlock(&ctx->flying_transfers_lock);
if (!timerisset(&next_timeout)) {
usbi_dbg("no URB with timeout or all handled by OS; no timeout!");
return 0;
}
r = usbi_backend.clock_gettime(USBI_CLOCK_MONOTONIC, &cur_ts);
if (r < 0) {
usbi_err(ctx, "failed to read monotonic clock, errno=%d", errno);
return 0;
}
TIMESPEC_TO_TIMEVAL(&cur_tv, &cur_ts);
if (!timercmp(&cur_tv, &next_timeout, <)) {
usbi_dbg("first timeout already expired");
timerclear(tv);
} else {
timersub(&next_timeout, &cur_tv, tv);
usbi_dbg("next timeout in %ld.%06lds", (long)tv->tv_sec, (long)tv->tv_usec);
}
return 1;
}
/** \ingroup libusb_poll
* Register notification functions for file descriptor additions/removals.
* These functions will be invoked for every new or removed file descriptor
* that libusb uses as an event source.
*
* To remove notifiers, pass NULL values for the function pointers.
*
* Note that file descriptors may have been added even before you register
* these notifiers (e.g. at libusb_init() time).
*
* Additionally, note that the removal notifier may be called during
* libusb_exit() (e.g. when it is closing file descriptors that were opened
* and added to the poll set at libusb_init() time). If you don't want this,
* remove the notifiers immediately before calling libusb_exit().
*
* \param ctx the context to operate on, or NULL for the default context
* \param added_cb pointer to function for addition notifications
* \param removed_cb pointer to function for removal notifications
* \param user_data User data to be passed back to callbacks (useful for
* passing context information)
*/
void API_EXPORTED libusb_set_pollfd_notifiers(libusb_context *ctx,
libusb_pollfd_added_cb added_cb, libusb_pollfd_removed_cb removed_cb,
void *user_data)
{
USBI_GET_CONTEXT(ctx);
ctx->fd_added_cb = added_cb;
ctx->fd_removed_cb = removed_cb;
ctx->fd_cb_user_data = user_data;
}
/*
* Interrupt the iteration of the event handling thread, so that it picks
* up the fd change. Callers of this function must hold the event_data_lock.
*/
static void usbi_fd_notification(struct libusb_context *ctx)
{
int pending_events;
/* Record that there is a new poll fd.
* Only signal an event if there are no prior pending events. */
pending_events = usbi_pending_events(ctx);
ctx->event_flags |= USBI_EVENT_POLLFDS_MODIFIED;
if (!pending_events)
usbi_signal_event(ctx);
}
/* Add a file descriptor to the list of file descriptors to be monitored.
* events should be specified as a bitmask of events passed to poll(), e.g.
* POLLIN and/or POLLOUT. */
int usbi_add_pollfd(struct libusb_context *ctx, int fd, short events)
{
struct usbi_pollfd *ipollfd = malloc(sizeof(*ipollfd));
if (!ipollfd)
return LIBUSB_ERROR_NO_MEM;
usbi_dbg("add fd %d events %d", fd, events);
ipollfd->pollfd.fd = fd;
ipollfd->pollfd.events = events;
usbi_mutex_lock(&ctx->event_data_lock);
list_add_tail(&ipollfd->list, &ctx->ipollfds);
ctx->pollfds_cnt++;
usbi_fd_notification(ctx);
usbi_mutex_unlock(&ctx->event_data_lock);
if (ctx->fd_added_cb)
ctx->fd_added_cb(fd, events, ctx->fd_cb_user_data);
return 0;
}
/* Remove a file descriptor from the list of file descriptors to be polled. */
void usbi_remove_pollfd(struct libusb_context *ctx, int fd)
{
struct usbi_pollfd *ipollfd;
int found = 0;
usbi_dbg("remove fd %d", fd);
usbi_mutex_lock(&ctx->event_data_lock);
list_for_each_entry(ipollfd, &ctx->ipollfds, list, struct usbi_pollfd)
if (ipollfd->pollfd.fd == fd) {
found = 1;
break;
}
if (!found) {
usbi_dbg("couldn't find fd %d to remove", fd);
usbi_mutex_unlock(&ctx->event_data_lock);
return;
}
list_del(&ipollfd->list);
list_add_tail(&ipollfd->list, &ctx->removed_ipollfds);
ctx->pollfds_cnt--;
usbi_fd_notification(ctx);
usbi_mutex_unlock(&ctx->event_data_lock);
if (ctx->fd_removed_cb)
ctx->fd_removed_cb(fd, ctx->fd_cb_user_data);
}
/** \ingroup libusb_poll
* Retrieve a list of file descriptors that should be polled by your main loop
* as libusb event sources.
*
* The returned list is NULL-terminated and should be freed with libusb_free_pollfds()
* when done. The actual list contents must not be touched.
*
* As file descriptors are a Unix-specific concept, this function is not
* available on Windows and will always return NULL.
*
* \param ctx the context to operate on, or NULL for the default context
* \returns a NULL-terminated list of libusb_pollfd structures
* \returns NULL on error
* \returns NULL on platforms where the functionality is not available
*/
DEFAULT_VISIBILITY
const struct libusb_pollfd ** LIBUSB_CALL libusb_get_pollfds(
libusb_context *ctx)
{
#ifndef OS_WINDOWS
struct libusb_pollfd **ret = NULL;
struct usbi_pollfd *ipollfd;
size_t i = 0;
USBI_GET_CONTEXT(ctx);
usbi_mutex_lock(&ctx->event_data_lock);
ret = calloc(ctx->pollfds_cnt + 1, sizeof(struct libusb_pollfd *));
if (!ret)
goto out;
list_for_each_entry(ipollfd, &ctx->ipollfds, list, struct usbi_pollfd)
ret[i++] = (struct libusb_pollfd *) ipollfd;
ret[ctx->pollfds_cnt] = NULL;
out:
usbi_mutex_unlock(&ctx->event_data_lock);
return (const struct libusb_pollfd **) ret;
#else
usbi_err(ctx, "external polling of libusb's internal descriptors "\
"is not yet supported on Windows platforms");
return NULL;
#endif
}
/** \ingroup libusb_poll
* Free a list of libusb_pollfd structures. This should be called for all
* pollfd lists allocated with libusb_get_pollfds().
*
* Since version 1.0.20, \ref LIBUSB_API_VERSION >= 0x01000104
*
* It is legal to call this function with a NULL pollfd list. In this case,
* the function will simply do nothing.
*
* \param pollfds the list of libusb_pollfd structures to free
*/
void API_EXPORTED libusb_free_pollfds(const struct libusb_pollfd **pollfds)
{
free((void *)pollfds);
}
/* Backends may call this from handle_events to report disconnection of a
* device. This function ensures transfers get cancelled appropriately.
* Callers of this function must hold the events_lock.
*/
void usbi_handle_disconnect(struct libusb_device_handle *dev_handle)
{
struct usbi_transfer *cur;
struct usbi_transfer *to_cancel;
usbi_dbg("device %d.%d",
dev_handle->dev->bus_number, dev_handle->dev->device_address);
/* terminate all pending transfers with the LIBUSB_TRANSFER_NO_DEVICE
* status code.
*
* when we find a transfer for this device on the list, there are two
* possible scenarios:
* 1. the transfer is currently in-flight, in which case we terminate the
* transfer here
* 2. the transfer has been added to the flying transfer list by
* libusb_submit_transfer, has failed to submit and
* libusb_submit_transfer is waiting for us to release the
* flying_transfers_lock to remove it, so we ignore it
*/
while (1) {
to_cancel = NULL;
usbi_mutex_lock(&HANDLE_CTX(dev_handle)->flying_transfers_lock);
list_for_each_entry(cur, &HANDLE_CTX(dev_handle)->flying_transfers, list, struct usbi_transfer)
if (USBI_TRANSFER_TO_LIBUSB_TRANSFER(cur)->dev_handle == dev_handle) {
usbi_mutex_lock(&cur->lock);
if (cur->state_flags & USBI_TRANSFER_IN_FLIGHT)
to_cancel = cur;
usbi_mutex_unlock(&cur->lock);
if (to_cancel)
break;
}
usbi_mutex_unlock(&HANDLE_CTX(dev_handle)->flying_transfers_lock);
if (!to_cancel)
break;
usbi_dbg("cancelling transfer %p from disconnect",
USBI_TRANSFER_TO_LIBUSB_TRANSFER(to_cancel));
usbi_mutex_lock(&to_cancel->lock);
usbi_backend.clear_transfer_priv(to_cancel);
usbi_mutex_unlock(&to_cancel->lock);
usbi_handle_transfer_completion(to_cancel, LIBUSB_TRANSFER_NO_DEVICE);
}
}