| /* -*- Mode: C; indent-tabs-mode:t ; c-basic-offset:8 -*- */ |
| /* |
| * Core functions for libusb |
| * Copyright © 2012-2013 Nathan Hjelm <hjelmn@cs.unm.edu> |
| * Copyright © 2007-2008 Daniel Drake <dsd@gentoo.org> |
| * Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include "libusbi.h" |
| #include "hotplug.h" |
| #include "version.h" |
| |
| #ifdef __ANDROID__ |
| #include <android/log.h> |
| #endif |
| #include <stdio.h> |
| #include <string.h> |
| #ifdef HAVE_SYSLOG |
| #include <syslog.h> |
| #endif |
| |
| struct libusb_context *usbi_default_context; |
| static const struct libusb_version libusb_version_internal = |
| { LIBUSB_MAJOR, LIBUSB_MINOR, LIBUSB_MICRO, LIBUSB_NANO, |
| LIBUSB_RC, "http://libusb.info" }; |
| static int default_context_refcnt; |
| static usbi_mutex_static_t default_context_lock = USBI_MUTEX_INITIALIZER; |
| static struct timespec timestamp_origin; |
| #if defined(ENABLE_LOGGING) && !defined(USE_SYSTEM_LOGGING_FACILITY) |
| static libusb_log_cb log_handler; |
| #endif |
| |
| usbi_mutex_static_t active_contexts_lock = USBI_MUTEX_INITIALIZER; |
| struct list_head active_contexts_list; |
| |
| /** |
| * \mainpage libusb-1.0 API Reference |
| * |
| * \section intro Introduction |
| * |
| * libusb is an open source library that allows you to communicate with USB |
| * devices from userspace. For more info, see the |
| * <a href="http://libusb.info">libusb homepage</a>. |
| * |
| * This documentation is aimed at application developers wishing to |
| * communicate with USB peripherals from their own software. After reviewing |
| * this documentation, feedback and questions can be sent to the |
| * <a href="http://mailing-list.libusb.info">libusb-devel mailing list</a>. |
| * |
| * This documentation assumes knowledge of how to operate USB devices from |
| * a software standpoint (descriptors, configurations, interfaces, endpoints, |
| * control/bulk/interrupt/isochronous transfers, etc). Full information |
| * can be found in the <a href="http://www.usb.org/developers/docs/">USB 3.0 |
| * Specification</a> which is available for free download. You can probably |
| * find less verbose introductions by searching the web. |
| * |
| * \section API Application Programming Interface (API) |
| * |
| * See the \ref libusb_api page for a complete list of the libusb functions. |
| * |
| * \section features Library features |
| * |
| * - All transfer types supported (control/bulk/interrupt/isochronous) |
| * - 2 transfer interfaces: |
| * -# Synchronous (simple) |
| * -# Asynchronous (more complicated, but more powerful) |
| * - Thread safe (although the asynchronous interface means that you |
| * usually won't need to thread) |
| * - Lightweight with lean API |
| * - Compatible with libusb-0.1 through the libusb-compat-0.1 translation layer |
| * - Hotplug support (on some platforms). See \ref libusb_hotplug. |
| * |
| * \section gettingstarted Getting Started |
| * |
| * To begin reading the API documentation, start with the Modules page which |
| * links to the different categories of libusb's functionality. |
| * |
| * One decision you will have to make is whether to use the synchronous |
| * or the asynchronous data transfer interface. The \ref libusb_io documentation |
| * provides some insight into this topic. |
| * |
| * Some example programs can be found in the libusb source distribution under |
| * the "examples" subdirectory. The libusb homepage includes a list of |
| * real-life project examples which use libusb. |
| * |
| * \section errorhandling Error handling |
| * |
| * libusb functions typically return 0 on success or a negative error code |
| * on failure. These negative error codes relate to LIBUSB_ERROR constants |
| * which are listed on the \ref libusb_misc "miscellaneous" documentation page. |
| * |
| * \section msglog Debug message logging |
| * |
| * libusb uses stderr for all logging. By default, logging is set to NONE, |
| * which means that no output will be produced. However, unless the library |
| * has been compiled with logging disabled, then any application calls to |
| * libusb_set_option(ctx, LIBUSB_OPTION_LOG_LEVEL, level), or the setting of the |
| * environmental variable LIBUSB_DEBUG outside of the application, can result |
| * in logging being produced. Your application should therefore not close |
| * stderr, but instead direct it to the null device if its output is |
| * undesirable. |
| * |
| * The libusb_set_option(ctx, LIBUSB_OPTION_LOG_LEVEL, level) function can be |
| * used to enable logging of certain messages. Under standard configuration, |
| * libusb doesn't really log much so you are advised to use this function |
| * to enable all error/warning/ informational messages. It will help debug |
| * problems with your software. |
| * |
| * The logged messages are unstructured. There is no one-to-one correspondence |
| * between messages being logged and success or failure return codes from |
| * libusb functions. There is no format to the messages, so you should not |
| * try to capture or parse them. They are not and will not be localized. |
| * These messages are not intended to being passed to your application user; |
| * instead, you should interpret the error codes returned from libusb functions |
| * and provide appropriate notification to the user. The messages are simply |
| * there to aid you as a programmer, and if you're confused because you're |
| * getting a strange error code from a libusb function, enabling message |
| * logging may give you a suitable explanation. |
| * |
| * The LIBUSB_DEBUG environment variable can be used to enable message logging |
| * at run-time. This environment variable should be set to a log level number, |
| * which is interpreted the same as the |
| * libusb_set_option(ctx, LIBUSB_OPTION_LOG_LEVEL, level) parameter. When this |
| * environment variable is set, the message logging verbosity level is fixed |
| * and libusb_set_option(ctx, LIBUSB_OPTION_LOG_LEVEL, level) effectively does |
| * nothing. |
| * |
| * libusb can be compiled without any logging functions, useful for embedded |
| * systems. In this case, libusb_set_option(ctx, LIBUSB_OPTION_LOG_LEVEL, level) |
| * and the LIBUSB_DEBUG environment variable have no effects. |
| * |
| * libusb can also be compiled with verbose debugging messages always. When |
| * the library is compiled in this way, all messages of all verbosities are |
| * always logged. libusb_set_option(ctx, LIBUSB_OPTION_LOG_LEVEL, level) and |
| * the LIBUSB_DEBUG environment variable have no effects. |
| * |
| * \section remarks Other remarks |
| * |
| * libusb does have imperfections. The \ref libusb_caveats "caveats" page attempts |
| * to document these. |
| */ |
| |
| /** |
| * \page libusb_caveats Caveats |
| * |
| * \section fork Fork considerations |
| * |
| * libusb is <em>not</em> designed to work across fork() calls. Depending on |
| * the platform, there may be resources in the parent process that are not |
| * available to the child (e.g. the hotplug monitor thread on Linux). In |
| * addition, since the parent and child will share libusb's internal file |
| * descriptors, using libusb in any way from the child could cause the parent |
| * process's \ref libusb_context to get into an inconsistent state. |
| * |
| * On Linux, libusb's file descriptors will be marked as CLOEXEC, which means |
| * that it is safe to fork() and exec() without worrying about the child |
| * process needing to clean up state or having access to these file descriptors. |
| * Other platforms may not be so forgiving, so consider yourself warned! |
| * |
| * \section devresets Device resets |
| * |
| * The libusb_reset_device() function allows you to reset a device. If your |
| * program has to call such a function, it should obviously be aware that |
| * the reset will cause device state to change (e.g. register values may be |
| * reset). |
| * |
| * The problem is that any other program could reset the device your program |
| * is working with, at any time. libusb does not offer a mechanism to inform |
| * you when this has happened, so if someone else resets your device it will |
| * not be clear to your own program why the device state has changed. |
| * |
| * Ultimately, this is a limitation of writing drivers in userspace. |
| * Separation from the USB stack in the underlying kernel makes it difficult |
| * for the operating system to deliver such notifications to your program. |
| * The Linux kernel USB stack allows such reset notifications to be delivered |
| * to in-kernel USB drivers, but it is not clear how such notifications could |
| * be delivered to second-class drivers that live in userspace. |
| * |
| * \section blockonly Blocking-only functionality |
| * |
| * The functionality listed below is only available through synchronous, |
| * blocking functions. There are no asynchronous/non-blocking alternatives, |
| * and no clear ways of implementing these. |
| * |
| * - Configuration activation (libusb_set_configuration()) |
| * - Interface/alternate setting activation (libusb_set_interface_alt_setting()) |
| * - Releasing of interfaces (libusb_release_interface()) |
| * - Clearing of halt/stall condition (libusb_clear_halt()) |
| * - Device resets (libusb_reset_device()) |
| * |
| * \section configsel Configuration selection and handling |
| * |
| * When libusb presents a device handle to an application, there is a chance |
| * that the corresponding device may be in unconfigured state. For devices |
| * with multiple configurations, there is also a chance that the configuration |
| * currently selected is not the one that the application wants to use. |
| * |
| * The obvious solution is to add a call to libusb_set_configuration() early |
| * on during your device initialization routines, but there are caveats to |
| * be aware of: |
| * -# If the device is already in the desired configuration, calling |
| * libusb_set_configuration() using the same configuration value will cause |
| * a lightweight device reset. This may not be desirable behaviour. |
| * -# In the case where the desired configuration is already active, libusb |
| * may not even be able to perform a lightweight device reset. For example, |
| * take my USB keyboard with fingerprint reader: I'm interested in driving |
| * the fingerprint reader interface through libusb, but the kernel's |
| * USB-HID driver will almost always have claimed the keyboard interface. |
| * Because the kernel has claimed an interface, it is not even possible to |
| * perform the lightweight device reset, so libusb_set_configuration() will |
| * fail. (Luckily the device in question only has a single configuration.) |
| * -# libusb will be unable to set a configuration if other programs or |
| * drivers have claimed interfaces. In particular, this means that kernel |
| * drivers must be detached from all the interfaces before |
| * libusb_set_configuration() may succeed. |
| * |
| * One solution to some of the above problems is to consider the currently |
| * active configuration. If the configuration we want is already active, then |
| * we don't have to select any configuration: |
| \code |
| cfg = -1; |
| libusb_get_configuration(dev, &cfg); |
| if (cfg != desired) |
| libusb_set_configuration(dev, desired); |
| \endcode |
| * |
| * This is probably suitable for most scenarios, but is inherently racy: |
| * another application or driver may change the selected configuration |
| * <em>after</em> the libusb_get_configuration() call. |
| * |
| * Even in cases where libusb_set_configuration() succeeds, consider that other |
| * applications or drivers may change configuration after your application |
| * calls libusb_set_configuration(). |
| * |
| * One possible way to lock your device into a specific configuration is as |
| * follows: |
| * -# Set the desired configuration (or use the logic above to realise that |
| * it is already in the desired configuration) |
| * -# Claim the interface that you wish to use |
| * -# Check that the currently active configuration is the one that you want |
| * to use. |
| * |
| * The above method works because once an interface is claimed, no application |
| * or driver is able to select another configuration. |
| * |
| * \section earlycomp Early transfer completion |
| * |
| * NOTE: This section is currently Linux-centric. I am not sure if any of these |
| * considerations apply to Darwin or other platforms. |
| * |
| * When a transfer completes early (i.e. when less data is received/sent in |
| * any one packet than the transfer buffer allows for) then libusb is designed |
| * to terminate the transfer immediately, not transferring or receiving any |
| * more data unless other transfers have been queued by the user. |
| * |
| * On legacy platforms, libusb is unable to do this in all situations. After |
| * the incomplete packet occurs, "surplus" data may be transferred. For recent |
| * versions of libusb, this information is kept (the data length of the |
| * transfer is updated) and, for device-to-host transfers, any surplus data was |
| * added to the buffer. Still, this is not a nice solution because it loses the |
| * information about the end of the short packet, and the user probably wanted |
| * that surplus data to arrive in the next logical transfer. |
| * |
| * \section zlp Zero length packets |
| * |
| * - libusb is able to send a packet of zero length to an endpoint simply by |
| * submitting a transfer of zero length. |
| * - The \ref libusb_transfer_flags::LIBUSB_TRANSFER_ADD_ZERO_PACKET |
| * "LIBUSB_TRANSFER_ADD_ZERO_PACKET" flag is currently only supported on Linux. |
| */ |
| |
| /** |
| * \page libusb_contexts Contexts |
| * |
| * It is possible that libusb may be used simultaneously from two independent |
| * libraries linked into the same executable. For example, if your application |
| * has a plugin-like system which allows the user to dynamically load a range |
| * of modules into your program, it is feasible that two independently |
| * developed modules may both use libusb. |
| * |
| * libusb is written to allow for these multiple user scenarios. The two |
| * "instances" of libusb will not interfere: libusb_set_option() calls |
| * from one user will not affect the same settings for other users, other |
| * users can continue using libusb after one of them calls libusb_exit(), etc. |
| * |
| * This is made possible through libusb's <em>context</em> concept. When you |
| * call libusb_init(), you are (optionally) given a context. You can then pass |
| * this context pointer back into future libusb functions. |
| * |
| * In order to keep things simple for more simplistic applications, it is |
| * legal to pass NULL to all functions requiring a context pointer (as long as |
| * you're sure no other code will attempt to use libusb from the same process). |
| * When you pass NULL, the default context will be used. The default context |
| * is created the first time a process calls libusb_init() when no other |
| * context is alive. Contexts are destroyed during libusb_exit(). |
| * |
| * The default context is reference-counted and can be shared. That means that |
| * if libusb_init(NULL) is called twice within the same process, the two |
| * users end up sharing the same context. The deinitialization and freeing of |
| * the default context will only happen when the last user calls libusb_exit(). |
| * In other words, the default context is created and initialized when its |
| * reference count goes from 0 to 1, and is deinitialized and destroyed when |
| * its reference count goes from 1 to 0. |
| * |
| * You may be wondering why only a subset of libusb functions require a |
| * context pointer in their function definition. Internally, libusb stores |
| * context pointers in other objects (e.g. libusb_device instances) and hence |
| * can infer the context from those objects. |
| */ |
| |
| /** |
| * \page libusb_api Application Programming Interface |
| * |
| * This is the complete list of libusb functions, structures and |
| * enumerations in alphabetical order. |
| * |
| * \section Functions |
| * - libusb_alloc_streams() |
| * - libusb_alloc_transfer() |
| * - libusb_attach_kernel_driver() |
| * - libusb_bulk_transfer() |
| * - libusb_cancel_transfer() |
| * - libusb_claim_interface() |
| * - libusb_clear_halt() |
| * - libusb_close() |
| * - libusb_control_transfer() |
| * - libusb_control_transfer_get_data() |
| * - libusb_control_transfer_get_setup() |
| * - libusb_cpu_to_le16() |
| * - libusb_detach_kernel_driver() |
| * - libusb_dev_mem_alloc() |
| * - libusb_dev_mem_free() |
| * - libusb_error_name() |
| * - libusb_event_handler_active() |
| * - libusb_event_handling_ok() |
| * - libusb_exit() |
| * - libusb_fill_bulk_stream_transfer() |
| * - libusb_fill_bulk_transfer() |
| * - libusb_fill_control_setup() |
| * - libusb_fill_control_transfer() |
| * - libusb_fill_interrupt_transfer() |
| * - libusb_fill_iso_transfer() |
| * - libusb_free_bos_descriptor() |
| * - libusb_free_config_descriptor() |
| * - libusb_free_container_id_descriptor() |
| * - libusb_free_device_list() |
| * - libusb_free_pollfds() |
| * - libusb_free_ss_endpoint_companion_descriptor() |
| * - libusb_free_ss_usb_device_capability_descriptor() |
| * - libusb_free_streams() |
| * - libusb_free_transfer() |
| * - libusb_free_usb_2_0_extension_descriptor() |
| * - libusb_get_active_config_descriptor() |
| * - libusb_get_bos_descriptor() |
| * - libusb_get_bus_number() |
| * - libusb_get_config_descriptor() |
| * - libusb_get_config_descriptor_by_value() |
| * - libusb_get_configuration() |
| * - libusb_get_container_id_descriptor() |
| * - libusb_get_descriptor() |
| * - libusb_get_device() |
| * - libusb_get_device_address() |
| * - libusb_get_device_descriptor() |
| * - libusb_get_device_list() |
| * - libusb_get_device_speed() |
| * - libusb_get_iso_packet_buffer() |
| * - libusb_get_iso_packet_buffer_simple() |
| * - libusb_get_max_iso_packet_size() |
| * - libusb_get_max_packet_size() |
| * - libusb_get_next_timeout() |
| * - libusb_get_parent() |
| * - libusb_get_pollfds() |
| * - libusb_get_port_number() |
| * - libusb_get_port_numbers() |
| * - libusb_get_port_path() |
| * - libusb_get_ss_endpoint_companion_descriptor() |
| * - libusb_get_ss_usb_device_capability_descriptor() |
| * - libusb_get_string_descriptor() |
| * - libusb_get_string_descriptor_ascii() |
| * - libusb_get_usb_2_0_extension_descriptor() |
| * - libusb_get_version() |
| * - libusb_handle_events() |
| * - libusb_handle_events_completed() |
| * - libusb_handle_events_locked() |
| * - libusb_handle_events_timeout() |
| * - libusb_handle_events_timeout_completed() |
| * - libusb_has_capability() |
| * - libusb_hotplug_deregister_callback() |
| * - libusb_hotplug_register_callback() |
| * - libusb_init() |
| * - libusb_interrupt_event_handler() |
| * - libusb_interrupt_transfer() |
| * - libusb_kernel_driver_active() |
| * - libusb_lock_events() |
| * - libusb_lock_event_waiters() |
| * - libusb_open() |
| * - libusb_open_device_with_vid_pid() |
| * - libusb_pollfds_handle_timeouts() |
| * - libusb_ref_device() |
| * - libusb_release_interface() |
| * - libusb_reset_device() |
| * - libusb_set_auto_detach_kernel_driver() |
| * - libusb_set_configuration() |
| * - libusb_set_debug() |
| * - libusb_set_log_cb() |
| * - libusb_set_interface_alt_setting() |
| * - libusb_set_iso_packet_lengths() |
| * - libusb_set_option() |
| * - libusb_setlocale() |
| * - libusb_set_pollfd_notifiers() |
| * - libusb_strerror() |
| * - libusb_submit_transfer() |
| * - libusb_transfer_get_stream_id() |
| * - libusb_transfer_set_stream_id() |
| * - libusb_try_lock_events() |
| * - libusb_unlock_events() |
| * - libusb_unlock_event_waiters() |
| * - libusb_unref_device() |
| * - libusb_wait_for_event() |
| * - libusb_wrap_sys_device() |
| * |
| * \section Structures |
| * - libusb_bos_descriptor |
| * - libusb_bos_dev_capability_descriptor |
| * - libusb_config_descriptor |
| * - libusb_container_id_descriptor |
| * - \ref libusb_context |
| * - libusb_control_setup |
| * - \ref libusb_device |
| * - libusb_device_descriptor |
| * - \ref libusb_device_handle |
| * - libusb_endpoint_descriptor |
| * - libusb_interface |
| * - libusb_interface_descriptor |
| * - libusb_iso_packet_descriptor |
| * - libusb_pollfd |
| * - libusb_ss_endpoint_companion_descriptor |
| * - libusb_ss_usb_device_capability_descriptor |
| * - libusb_transfer |
| * - libusb_usb_2_0_extension_descriptor |
| * - libusb_version |
| * |
| * \section Enums |
| * - \ref libusb_bos_type |
| * - \ref libusb_capability |
| * - \ref libusb_class_code |
| * - \ref libusb_descriptor_type |
| * - \ref libusb_endpoint_direction |
| * - \ref libusb_error |
| * - \ref libusb_iso_sync_type |
| * - \ref libusb_iso_usage_type |
| * - \ref libusb_log_level |
| * - \ref libusb_option |
| * - \ref libusb_request_recipient |
| * - \ref libusb_request_type |
| * - \ref libusb_speed |
| * - \ref libusb_ss_usb_device_capability_attributes |
| * - \ref libusb_standard_request |
| * - \ref libusb_supported_speed |
| * - \ref libusb_transfer_flags |
| * - \ref libusb_transfer_status |
| * - \ref libusb_transfer_type |
| * - \ref libusb_usb_2_0_extension_attributes |
| */ |
| |
| /** |
| * @defgroup libusb_lib Library initialization/deinitialization |
| * This page details how to initialize and deinitialize libusb. Initialization |
| * must be performed before using any libusb functionality, and similarly you |
| * must not call any libusb functions after deinitialization. |
| */ |
| |
| /** |
| * @defgroup libusb_dev Device handling and enumeration |
| * The functionality documented below is designed to help with the following |
| * operations: |
| * - Enumerating the USB devices currently attached to the system |
| * - Choosing a device to operate from your software |
| * - Opening and closing the chosen device |
| * |
| * \section nutshell In a nutshell... |
| * |
| * The description below really makes things sound more complicated than they |
| * actually are. The following sequence of function calls will be suitable |
| * for almost all scenarios and does not require you to have such a deep |
| * understanding of the resource management issues: |
| * \code |
| // discover devices |
| libusb_device **list; |
| libusb_device *found = NULL; |
| ssize_t cnt = libusb_get_device_list(NULL, &list); |
| ssize_t i = 0; |
| int err = 0; |
| if (cnt < 0) |
| error(); |
| |
| for (i = 0; i < cnt; i++) { |
| libusb_device *device = list[i]; |
| if (is_interesting(device)) { |
| found = device; |
| break; |
| } |
| } |
| |
| if (found) { |
| libusb_device_handle *handle; |
| |
| err = libusb_open(found, &handle); |
| if (err) |
| error(); |
| // etc |
| } |
| |
| libusb_free_device_list(list, 1); |
| \endcode |
| * |
| * The two important points: |
| * - You asked libusb_free_device_list() to unreference the devices (2nd |
| * parameter) |
| * - You opened the device before freeing the list and unreferencing the |
| * devices |
| * |
| * If you ended up with a handle, you can now proceed to perform I/O on the |
| * device. |
| * |
| * \section devshandles Devices and device handles |
| * libusb has a concept of a USB device, represented by the |
| * \ref libusb_device opaque type. A device represents a USB device that |
| * is currently or was previously connected to the system. Using a reference |
| * to a device, you can determine certain information about the device (e.g. |
| * you can read the descriptor data). |
| * |
| * The libusb_get_device_list() function can be used to obtain a list of |
| * devices currently connected to the system. This is known as device |
| * discovery. |
| * |
| * Just because you have a reference to a device does not mean it is |
| * necessarily usable. The device may have been unplugged, you may not have |
| * permission to operate such device, or another program or driver may be |
| * using the device. |
| * |
| * When you've found a device that you'd like to operate, you must ask |
| * libusb to open the device using the libusb_open() function. Assuming |
| * success, libusb then returns you a <em>device handle</em> |
| * (a \ref libusb_device_handle pointer). All "real" I/O operations then |
| * operate on the handle rather than the original device pointer. |
| * |
| * \section devref Device discovery and reference counting |
| * |
| * Device discovery (i.e. calling libusb_get_device_list()) returns a |
| * freshly-allocated list of devices. The list itself must be freed when |
| * you are done with it. libusb also needs to know when it is OK to free |
| * the contents of the list - the devices themselves. |
| * |
| * To handle these issues, libusb provides you with two separate items: |
| * - A function to free the list itself |
| * - A reference counting system for the devices inside |
| * |
| * New devices presented by the libusb_get_device_list() function all have a |
| * reference count of 1. You can increase and decrease reference count using |
| * libusb_ref_device() and libusb_unref_device(). A device is destroyed when |
| * its reference count reaches 0. |
| * |
| * With the above information in mind, the process of opening a device can |
| * be viewed as follows: |
| * -# Discover devices using libusb_get_device_list(). |
| * -# Choose the device that you want to operate, and call libusb_open(). |
| * -# Unref all devices in the discovered device list. |
| * -# Free the discovered device list. |
| * |
| * The order is important - you must not unreference the device before |
| * attempting to open it, because unreferencing it may destroy the device. |
| * |
| * For convenience, the libusb_free_device_list() function includes a |
| * parameter to optionally unreference all the devices in the list before |
| * freeing the list itself. This combines steps 3 and 4 above. |
| * |
| * As an implementation detail, libusb_open() actually adds a reference to |
| * the device in question. This is because the device remains available |
| * through the handle via libusb_get_device(). The reference is deleted during |
| * libusb_close(). |
| */ |
| |
| /** @defgroup libusb_misc Miscellaneous */ |
| |
| /* we traverse usbfs without knowing how many devices we are going to find. |
| * so we create this discovered_devs model which is similar to a linked-list |
| * which grows when required. it can be freed once discovery has completed, |
| * eliminating the need for a list node in the libusb_device structure |
| * itself. */ |
| #define DISCOVERED_DEVICES_SIZE_STEP 8 |
| |
| static struct discovered_devs *discovered_devs_alloc(void) |
| { |
| struct discovered_devs *ret = |
| malloc(sizeof(*ret) + (sizeof(void *) * DISCOVERED_DEVICES_SIZE_STEP)); |
| |
| if (ret) { |
| ret->len = 0; |
| ret->capacity = DISCOVERED_DEVICES_SIZE_STEP; |
| } |
| return ret; |
| } |
| |
| static void discovered_devs_free(struct discovered_devs *discdevs) |
| { |
| size_t i; |
| |
| for (i = 0; i < discdevs->len; i++) |
| libusb_unref_device(discdevs->devices[i]); |
| |
| free(discdevs); |
| } |
| |
| /* append a device to the discovered devices collection. may realloc itself, |
| * returning new discdevs. returns NULL on realloc failure. */ |
| struct discovered_devs *discovered_devs_append( |
| struct discovered_devs *discdevs, struct libusb_device *dev) |
| { |
| size_t len = discdevs->len; |
| size_t capacity; |
| struct discovered_devs *new_discdevs; |
| |
| /* if there is space, just append the device */ |
| if (len < discdevs->capacity) { |
| discdevs->devices[len] = libusb_ref_device(dev); |
| discdevs->len++; |
| return discdevs; |
| } |
| |
| /* exceeded capacity, need to grow */ |
| usbi_dbg("need to increase capacity"); |
| capacity = discdevs->capacity + DISCOVERED_DEVICES_SIZE_STEP; |
| /* can't use usbi_reallocf here because in failure cases it would |
| * free the existing discdevs without unreferencing its devices. */ |
| new_discdevs = realloc(discdevs, |
| sizeof(*discdevs) + (sizeof(void *) * capacity)); |
| if (!new_discdevs) { |
| discovered_devs_free(discdevs); |
| return NULL; |
| } |
| |
| discdevs = new_discdevs; |
| discdevs->capacity = capacity; |
| discdevs->devices[len] = libusb_ref_device(dev); |
| discdevs->len++; |
| |
| return discdevs; |
| } |
| |
| /* Allocate a new device with a specific session ID. The returned device has |
| * a reference count of 1. */ |
| struct libusb_device *usbi_alloc_device(struct libusb_context *ctx, |
| unsigned long session_id) |
| { |
| size_t priv_size = usbi_backend.device_priv_size; |
| struct libusb_device *dev = calloc(1, PTR_ALIGN(sizeof(*dev)) + priv_size); |
| int r; |
| |
| if (!dev) |
| return NULL; |
| |
| r = usbi_mutex_init(&dev->lock); |
| if (r) { |
| free(dev); |
| return NULL; |
| } |
| |
| dev->ctx = ctx; |
| dev->refcnt = 1; |
| dev->session_data = session_id; |
| dev->speed = LIBUSB_SPEED_UNKNOWN; |
| |
| if (!libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) { |
| usbi_connect_device (dev); |
| } |
| |
| return dev; |
| } |
| |
| void usbi_connect_device(struct libusb_device *dev) |
| { |
| struct libusb_context *ctx = DEVICE_CTX(dev); |
| |
| dev->attached = 1; |
| |
| usbi_mutex_lock(&dev->ctx->usb_devs_lock); |
| list_add(&dev->list, &dev->ctx->usb_devs); |
| usbi_mutex_unlock(&dev->ctx->usb_devs_lock); |
| |
| /* Signal that an event has occurred for this device if we support hotplug AND |
| * the hotplug message list is ready. This prevents an event from getting raised |
| * during initial enumeration. */ |
| if (libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG) && dev->ctx->hotplug_msgs.next) { |
| usbi_hotplug_notification(ctx, dev, LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED); |
| } |
| } |
| |
| void usbi_disconnect_device(struct libusb_device *dev) |
| { |
| struct libusb_context *ctx = DEVICE_CTX(dev); |
| |
| usbi_mutex_lock(&dev->lock); |
| dev->attached = 0; |
| usbi_mutex_unlock(&dev->lock); |
| |
| usbi_mutex_lock(&ctx->usb_devs_lock); |
| list_del(&dev->list); |
| usbi_mutex_unlock(&ctx->usb_devs_lock); |
| |
| /* Signal that an event has occurred for this device if we support hotplug AND |
| * the hotplug message list is ready. This prevents an event from getting raised |
| * during initial enumeration. libusb_handle_events will take care of dereferencing |
| * the device. */ |
| if (libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG) && dev->ctx->hotplug_msgs.next) { |
| usbi_hotplug_notification(ctx, dev, LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT); |
| } |
| } |
| |
| /* Perform some final sanity checks on a newly discovered device. If this |
| * function fails (negative return code), the device should not be added |
| * to the discovered device list. */ |
| int usbi_sanitize_device(struct libusb_device *dev) |
| { |
| int r; |
| uint8_t num_configurations; |
| |
| r = usbi_device_cache_descriptor(dev); |
| if (r < 0) |
| return r; |
| |
| num_configurations = dev->device_descriptor.bNumConfigurations; |
| if (num_configurations > USB_MAXCONFIG) { |
| usbi_err(DEVICE_CTX(dev), "too many configurations"); |
| return LIBUSB_ERROR_IO; |
| } else if (0 == num_configurations) { |
| usbi_dbg("zero configurations, maybe an unauthorized device"); |
| } |
| |
| return 0; |
| } |
| |
| /* Examine libusb's internal list of known devices, looking for one with |
| * a specific session ID. Returns the matching device if it was found, and |
| * NULL otherwise. */ |
| struct libusb_device *usbi_get_device_by_session_id(struct libusb_context *ctx, |
| unsigned long session_id) |
| { |
| struct libusb_device *dev; |
| struct libusb_device *ret = NULL; |
| |
| usbi_mutex_lock(&ctx->usb_devs_lock); |
| list_for_each_entry(dev, &ctx->usb_devs, list, struct libusb_device) |
| if (dev->session_data == session_id) { |
| ret = libusb_ref_device(dev); |
| break; |
| } |
| usbi_mutex_unlock(&ctx->usb_devs_lock); |
| |
| return ret; |
| } |
| |
| /** @ingroup libusb_dev |
| * Returns a list of USB devices currently attached to the system. This is |
| * your entry point into finding a USB device to operate. |
| * |
| * You are expected to unreference all the devices when you are done with |
| * them, and then free the list with libusb_free_device_list(). Note that |
| * libusb_free_device_list() can unref all the devices for you. Be careful |
| * not to unreference a device you are about to open until after you have |
| * opened it. |
| * |
| * This return value of this function indicates the number of devices in |
| * the resultant list. The list is actually one element larger, as it is |
| * NULL-terminated. |
| * |
| * \param ctx the context to operate on, or NULL for the default context |
| * \param list output location for a list of devices. Must be later freed with |
| * libusb_free_device_list(). |
| * \returns the number of devices in the outputted list, or any |
| * \ref libusb_error according to errors encountered by the backend. |
| */ |
| ssize_t API_EXPORTED libusb_get_device_list(libusb_context *ctx, |
| libusb_device ***list) |
| { |
| struct discovered_devs *discdevs = discovered_devs_alloc(); |
| struct libusb_device **ret; |
| int r = 0; |
| ssize_t i, len; |
| |
| usbi_dbg(" "); |
| |
| if (!discdevs) |
| return LIBUSB_ERROR_NO_MEM; |
| |
| ctx = usbi_get_context(ctx); |
| |
| if (libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) { |
| /* backend provides hotplug support */ |
| struct libusb_device *dev; |
| |
| if (usbi_backend.hotplug_poll) |
| usbi_backend.hotplug_poll(); |
| |
| usbi_mutex_lock(&ctx->usb_devs_lock); |
| list_for_each_entry(dev, &ctx->usb_devs, list, struct libusb_device) { |
| discdevs = discovered_devs_append(discdevs, dev); |
| |
| if (!discdevs) { |
| r = LIBUSB_ERROR_NO_MEM; |
| break; |
| } |
| } |
| usbi_mutex_unlock(&ctx->usb_devs_lock); |
| } else { |
| /* backend does not provide hotplug support */ |
| r = usbi_backend.get_device_list(ctx, &discdevs); |
| } |
| |
| if (r < 0) { |
| len = r; |
| goto out; |
| } |
| |
| /* convert discovered_devs into a list */ |
| len = (ssize_t)discdevs->len; |
| ret = calloc((size_t)len + 1, sizeof(struct libusb_device *)); |
| if (!ret) { |
| len = LIBUSB_ERROR_NO_MEM; |
| goto out; |
| } |
| |
| ret[len] = NULL; |
| for (i = 0; i < len; i++) { |
| struct libusb_device *dev = discdevs->devices[i]; |
| ret[i] = libusb_ref_device(dev); |
| } |
| *list = ret; |
| |
| out: |
| if (discdevs) |
| discovered_devs_free(discdevs); |
| return len; |
| } |
| |
| /** \ingroup libusb_dev |
| * Frees a list of devices previously discovered using |
| * libusb_get_device_list(). If the unref_devices parameter is set, the |
| * reference count of each device in the list is decremented by 1. |
| * \param list the list to free |
| * \param unref_devices whether to unref the devices in the list |
| */ |
| void API_EXPORTED libusb_free_device_list(libusb_device **list, |
| int unref_devices) |
| { |
| if (!list) |
| return; |
| |
| if (unref_devices) { |
| int i = 0; |
| struct libusb_device *dev; |
| |
| while ((dev = list[i++]) != NULL) |
| libusb_unref_device(dev); |
| } |
| free(list); |
| } |
| |
| /** \ingroup libusb_dev |
| * Get the number of the bus that a device is connected to. |
| * \param dev a device |
| * \returns the bus number |
| */ |
| uint8_t API_EXPORTED libusb_get_bus_number(libusb_device *dev) |
| { |
| return dev->bus_number; |
| } |
| |
| /** \ingroup libusb_dev |
| * Get the number of the port that a device is connected to. |
| * Unless the OS does something funky, or you are hot-plugging USB extension cards, |
| * the port number returned by this call is usually guaranteed to be uniquely tied |
| * to a physical port, meaning that different devices plugged on the same physical |
| * port should return the same port number. |
| * |
| * But outside of this, there is no guarantee that the port number returned by this |
| * call will remain the same, or even match the order in which ports have been |
| * numbered by the HUB/HCD manufacturer. |
| * |
| * \param dev a device |
| * \returns the port number (0 if not available) |
| */ |
| uint8_t API_EXPORTED libusb_get_port_number(libusb_device *dev) |
| { |
| return dev->port_number; |
| } |
| |
| /** \ingroup libusb_dev |
| * Get the list of all port numbers from root for the specified device |
| * |
| * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102 |
| * \param dev a device |
| * \param port_numbers the array that should contain the port numbers |
| * \param port_numbers_len the maximum length of the array. As per the USB 3.0 |
| * specs, the current maximum limit for the depth is 7. |
| * \returns the number of elements filled |
| * \returns LIBUSB_ERROR_OVERFLOW if the array is too small |
| */ |
| int API_EXPORTED libusb_get_port_numbers(libusb_device *dev, |
| uint8_t* port_numbers, int port_numbers_len) |
| { |
| int i = port_numbers_len; |
| struct libusb_context *ctx = DEVICE_CTX(dev); |
| |
| if (port_numbers_len <= 0) |
| return LIBUSB_ERROR_INVALID_PARAM; |
| |
| // HCDs can be listed as devices with port #0 |
| while((dev) && (dev->port_number != 0)) { |
| if (--i < 0) { |
| usbi_warn(ctx, "port numbers array is too small"); |
| return LIBUSB_ERROR_OVERFLOW; |
| } |
| port_numbers[i] = dev->port_number; |
| dev = dev->parent_dev; |
| } |
| if (i < port_numbers_len) |
| memmove(port_numbers, &port_numbers[i], port_numbers_len - i); |
| return port_numbers_len - i; |
| } |
| |
| /** \ingroup libusb_dev |
| * \deprecated Please use \ref libusb_get_port_numbers() instead. |
| */ |
| int API_EXPORTED libusb_get_port_path(libusb_context *ctx, libusb_device *dev, |
| uint8_t* port_numbers, uint8_t port_numbers_len) |
| { |
| UNUSED(ctx); |
| |
| return libusb_get_port_numbers(dev, port_numbers, port_numbers_len); |
| } |
| |
| /** \ingroup libusb_dev |
| * Get the the parent from the specified device. |
| * \param dev a device |
| * \returns the device parent or NULL if not available |
| * You should issue a \ref libusb_get_device_list() before calling this |
| * function and make sure that you only access the parent before issuing |
| * \ref libusb_free_device_list(). The reason is that libusb currently does |
| * not maintain a permanent list of device instances, and therefore can |
| * only guarantee that parents are fully instantiated within a |
| * libusb_get_device_list() - libusb_free_device_list() block. |
| */ |
| DEFAULT_VISIBILITY |
| libusb_device * LIBUSB_CALL libusb_get_parent(libusb_device *dev) |
| { |
| return dev->parent_dev; |
| } |
| |
| /** \ingroup libusb_dev |
| * Get the address of the device on the bus it is connected to. |
| * \param dev a device |
| * \returns the device address |
| */ |
| uint8_t API_EXPORTED libusb_get_device_address(libusb_device *dev) |
| { |
| return dev->device_address; |
| } |
| |
| /** \ingroup libusb_dev |
| * Get the negotiated connection speed for a device. |
| * \param dev a device |
| * \returns a \ref libusb_speed code, where LIBUSB_SPEED_UNKNOWN means that |
| * the OS doesn't know or doesn't support returning the negotiated speed. |
| */ |
| int API_EXPORTED libusb_get_device_speed(libusb_device *dev) |
| { |
| return dev->speed; |
| } |
| |
| static const struct libusb_endpoint_descriptor *find_endpoint( |
| struct libusb_config_descriptor *config, unsigned char endpoint) |
| { |
| int iface_idx; |
| for (iface_idx = 0; iface_idx < config->bNumInterfaces; iface_idx++) { |
| const struct libusb_interface *iface = &config->interface[iface_idx]; |
| int altsetting_idx; |
| |
| for (altsetting_idx = 0; altsetting_idx < iface->num_altsetting; |
| altsetting_idx++) { |
| const struct libusb_interface_descriptor *altsetting |
| = &iface->altsetting[altsetting_idx]; |
| int ep_idx; |
| |
| for (ep_idx = 0; ep_idx < altsetting->bNumEndpoints; ep_idx++) { |
| const struct libusb_endpoint_descriptor *ep = |
| &altsetting->endpoint[ep_idx]; |
| if (ep->bEndpointAddress == endpoint) |
| return ep; |
| } |
| } |
| } |
| return NULL; |
| } |
| |
| /** \ingroup libusb_dev |
| * Convenience function to retrieve the wMaxPacketSize value for a particular |
| * endpoint in the active device configuration. |
| * |
| * This function was originally intended to be of assistance when setting up |
| * isochronous transfers, but a design mistake resulted in this function |
| * instead. It simply returns the wMaxPacketSize value without considering |
| * its contents. If you're dealing with isochronous transfers, you probably |
| * want libusb_get_max_iso_packet_size() instead. |
| * |
| * \param dev a device |
| * \param endpoint address of the endpoint in question |
| * \returns the wMaxPacketSize value |
| * \returns LIBUSB_ERROR_NOT_FOUND if the endpoint does not exist |
| * \returns LIBUSB_ERROR_OTHER on other failure |
| */ |
| int API_EXPORTED libusb_get_max_packet_size(libusb_device *dev, |
| unsigned char endpoint) |
| { |
| struct libusb_config_descriptor *config; |
| const struct libusb_endpoint_descriptor *ep; |
| int r; |
| |
| r = libusb_get_active_config_descriptor(dev, &config); |
| if (r < 0) { |
| usbi_err(DEVICE_CTX(dev), |
| "could not retrieve active config descriptor"); |
| return LIBUSB_ERROR_OTHER; |
| } |
| |
| ep = find_endpoint(config, endpoint); |
| if (!ep) { |
| r = LIBUSB_ERROR_NOT_FOUND; |
| goto out; |
| } |
| |
| r = ep->wMaxPacketSize; |
| |
| out: |
| libusb_free_config_descriptor(config); |
| return r; |
| } |
| |
| /** \ingroup libusb_dev |
| * Calculate the maximum packet size which a specific endpoint is capable is |
| * sending or receiving in the duration of 1 microframe |
| * |
| * Only the active configuration is examined. The calculation is based on the |
| * wMaxPacketSize field in the endpoint descriptor as described in section |
| * 9.6.6 in the USB 2.0 specifications. |
| * |
| * If acting on an isochronous or interrupt endpoint, this function will |
| * multiply the value found in bits 0:10 by the number of transactions per |
| * microframe (determined by bits 11:12). Otherwise, this function just |
| * returns the numeric value found in bits 0:10. For USB 3.0 device, it |
| * will attempts to retrieve the Endpoint Companion Descriptor to return |
| * wBytesPerInterval. |
| * |
| * This function is useful for setting up isochronous transfers, for example |
| * you might pass the return value from this function to |
| * libusb_set_iso_packet_lengths() in order to set the length field of every |
| * isochronous packet in a transfer. |
| * |
| * Since v1.0.3. |
| * |
| * \param dev a device |
| * \param endpoint address of the endpoint in question |
| * \returns the maximum packet size which can be sent/received on this endpoint |
| * \returns LIBUSB_ERROR_NOT_FOUND if the endpoint does not exist |
| * \returns LIBUSB_ERROR_OTHER on other failure |
| */ |
| int API_EXPORTED libusb_get_max_iso_packet_size(libusb_device *dev, |
| unsigned char endpoint) |
| { |
| struct libusb_config_descriptor *config; |
| const struct libusb_endpoint_descriptor *ep; |
| struct libusb_ss_endpoint_companion_descriptor *ss_ep_cmp; |
| enum libusb_transfer_type ep_type; |
| uint16_t val; |
| int r; |
| int speed; |
| |
| r = libusb_get_active_config_descriptor(dev, &config); |
| if (r < 0) { |
| usbi_err(DEVICE_CTX(dev), |
| "could not retrieve active config descriptor"); |
| return LIBUSB_ERROR_OTHER; |
| } |
| |
| ep = find_endpoint(config, endpoint); |
| if (!ep) { |
| r = LIBUSB_ERROR_NOT_FOUND; |
| goto out; |
| } |
| |
| speed = libusb_get_device_speed(dev); |
| if (speed >= LIBUSB_SPEED_SUPER) { |
| r = libusb_get_ss_endpoint_companion_descriptor(dev->ctx, ep, &ss_ep_cmp); |
| if (r == LIBUSB_SUCCESS) { |
| r = ss_ep_cmp->wBytesPerInterval; |
| libusb_free_ss_endpoint_companion_descriptor(ss_ep_cmp); |
| } |
| } |
| |
| /* If the device isn't a SuperSpeed device or retrieving the SS endpoint didn't worked. */ |
| if (speed < LIBUSB_SPEED_SUPER || r < 0) { |
| val = ep->wMaxPacketSize; |
| ep_type = (enum libusb_transfer_type) (ep->bmAttributes & 0x3); |
| |
| r = val & 0x07ff; |
| if (ep_type == LIBUSB_TRANSFER_TYPE_ISOCHRONOUS |
| || ep_type == LIBUSB_TRANSFER_TYPE_INTERRUPT) |
| r *= (1 + ((val >> 11) & 3)); |
| } |
| |
| out: |
| libusb_free_config_descriptor(config); |
| return r; |
| } |
| |
| /** \ingroup libusb_dev |
| * Increment the reference count of a device. |
| * \param dev the device to reference |
| * \returns the same device |
| */ |
| DEFAULT_VISIBILITY |
| libusb_device * LIBUSB_CALL libusb_ref_device(libusb_device *dev) |
| { |
| usbi_mutex_lock(&dev->lock); |
| dev->refcnt++; |
| usbi_mutex_unlock(&dev->lock); |
| return dev; |
| } |
| |
| /** \ingroup libusb_dev |
| * Decrement the reference count of a device. If the decrement operation |
| * causes the reference count to reach zero, the device shall be destroyed. |
| * \param dev the device to unreference |
| */ |
| void API_EXPORTED libusb_unref_device(libusb_device *dev) |
| { |
| int refcnt; |
| |
| if (!dev) |
| return; |
| |
| usbi_mutex_lock(&dev->lock); |
| refcnt = --dev->refcnt; |
| usbi_mutex_unlock(&dev->lock); |
| |
| if (refcnt == 0) { |
| usbi_dbg("destroy device %d.%d", dev->bus_number, dev->device_address); |
| |
| libusb_unref_device(dev->parent_dev); |
| |
| if (usbi_backend.destroy_device) |
| usbi_backend.destroy_device(dev); |
| |
| if (!libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) { |
| /* backend does not support hotplug */ |
| usbi_disconnect_device(dev); |
| } |
| |
| usbi_mutex_destroy(&dev->lock); |
| free(dev); |
| } |
| } |
| |
| /* |
| * Signal the event pipe so that the event handling thread will be |
| * interrupted to process an internal event. |
| */ |
| int usbi_signal_event(struct libusb_context *ctx) |
| { |
| unsigned char dummy = 1; |
| ssize_t r; |
| |
| /* write some data on event pipe to interrupt event handlers */ |
| r = usbi_write(ctx->event_pipe[1], &dummy, sizeof(dummy)); |
| if (r != sizeof(dummy)) { |
| usbi_warn(ctx, "internal signalling write failed"); |
| return LIBUSB_ERROR_IO; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Clear the event pipe so that the event handling will no longer be |
| * interrupted. |
| */ |
| int usbi_clear_event(struct libusb_context *ctx) |
| { |
| unsigned char dummy; |
| ssize_t r; |
| |
| /* read some data on event pipe to clear it */ |
| r = usbi_read(ctx->event_pipe[0], &dummy, sizeof(dummy)); |
| if (r != sizeof(dummy)) { |
| usbi_warn(ctx, "internal signalling read failed"); |
| return LIBUSB_ERROR_IO; |
| } |
| |
| return 0; |
| } |
| |
| /** \ingroup libusb_dev |
| * Wrap a platform-specific system device handle and obtain a libusb device |
| * handle for the underlying device. The handle allows you to use libusb to |
| * perform I/O on the device in question. |
| * |
| * On Linux, the system device handle must be a valid file descriptor opened |
| * on the device node. |
| * |
| * The system device handle must remain open until libusb_close() is called. |
| * The system device handle will not be closed by libusb_close(). |
| * |
| * Internally, this function creates a temporary device and makes it |
| * available to you through libusb_get_device(). This device is destroyed |
| * during libusb_close(). The device shall not be opened through libusb_open(). |
| * |
| * This is a non-blocking function; no requests are sent over the bus. |
| * |
| * \param ctx the context to operate on, or NULL for the default context |
| * \param sys_dev the platform-specific system device handle |
| * \param dev_handle output location for the returned device handle pointer. Only |
| * populated when the return code is 0. |
| * \returns 0 on success |
| * \returns LIBUSB_ERROR_NO_MEM on memory allocation failure |
| * \returns LIBUSB_ERROR_ACCESS if the user has insufficient permissions |
| * \returns LIBUSB_ERROR_NOT_SUPPORTED if the operation is not supported on this |
| * platform |
| * \returns another LIBUSB_ERROR code on other failure |
| */ |
| int API_EXPORTED libusb_wrap_sys_device(libusb_context *ctx, intptr_t sys_dev, |
| libusb_device_handle **dev_handle) |
| { |
| struct libusb_device_handle *_dev_handle; |
| size_t priv_size = usbi_backend.device_handle_priv_size; |
| int r; |
| |
| usbi_dbg("wrap_sys_device %p", (void *)sys_dev); |
| |
| ctx = usbi_get_context(ctx); |
| |
| if (!usbi_backend.wrap_sys_device) |
| return LIBUSB_ERROR_NOT_SUPPORTED; |
| |
| _dev_handle = calloc(1, PTR_ALIGN(sizeof(*_dev_handle)) + priv_size); |
| if (!_dev_handle) |
| return LIBUSB_ERROR_NO_MEM; |
| |
| r = usbi_mutex_init(&_dev_handle->lock); |
| if (r) { |
| free(_dev_handle); |
| return LIBUSB_ERROR_OTHER; |
| } |
| |
| r = usbi_backend.wrap_sys_device(ctx, _dev_handle, sys_dev); |
| if (r < 0) { |
| usbi_dbg("wrap_sys_device %p returns %d", (void *)sys_dev, r); |
| usbi_mutex_destroy(&_dev_handle->lock); |
| free(_dev_handle); |
| return r; |
| } |
| |
| usbi_mutex_lock(&ctx->open_devs_lock); |
| list_add(&_dev_handle->list, &ctx->open_devs); |
| usbi_mutex_unlock(&ctx->open_devs_lock); |
| *dev_handle = _dev_handle; |
| |
| return 0; |
| } |
| |
| /** \ingroup libusb_dev |
| * Open a device and obtain a device handle. A handle allows you to perform |
| * I/O on the device in question. |
| * |
| * Internally, this function adds a reference to the device and makes it |
| * available to you through libusb_get_device(). This reference is removed |
| * during libusb_close(). |
| * |
| * This is a non-blocking function; no requests are sent over the bus. |
| * |
| * \param dev the device to open |
| * \param dev_handle output location for the returned device handle pointer. Only |
| * populated when the return code is 0. |
| * \returns 0 on success |
| * \returns LIBUSB_ERROR_NO_MEM on memory allocation failure |
| * \returns LIBUSB_ERROR_ACCESS if the user has insufficient permissions |
| * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected |
| * \returns another LIBUSB_ERROR code on other failure |
| */ |
| int API_EXPORTED libusb_open(libusb_device *dev, |
| libusb_device_handle **dev_handle) |
| { |
| struct libusb_context *ctx = DEVICE_CTX(dev); |
| struct libusb_device_handle *_dev_handle; |
| size_t priv_size = usbi_backend.device_handle_priv_size; |
| int r; |
| usbi_dbg("open %d.%d", dev->bus_number, dev->device_address); |
| |
| if (!dev->attached) { |
| return LIBUSB_ERROR_NO_DEVICE; |
| } |
| |
| _dev_handle = calloc(1, PTR_ALIGN(sizeof(*_dev_handle)) + priv_size); |
| if (!_dev_handle) |
| return LIBUSB_ERROR_NO_MEM; |
| |
| r = usbi_mutex_init(&_dev_handle->lock); |
| if (r) { |
| free(_dev_handle); |
| return LIBUSB_ERROR_OTHER; |
| } |
| |
| _dev_handle->dev = libusb_ref_device(dev); |
| |
| r = usbi_backend.open(_dev_handle); |
| if (r < 0) { |
| usbi_dbg("open %d.%d returns %d", dev->bus_number, dev->device_address, r); |
| libusb_unref_device(dev); |
| usbi_mutex_destroy(&_dev_handle->lock); |
| free(_dev_handle); |
| return r; |
| } |
| |
| usbi_mutex_lock(&ctx->open_devs_lock); |
| list_add(&_dev_handle->list, &ctx->open_devs); |
| usbi_mutex_unlock(&ctx->open_devs_lock); |
| *dev_handle = _dev_handle; |
| |
| return 0; |
| } |
| |
| /** \ingroup libusb_dev |
| * Convenience function for finding a device with a particular |
| * <tt>idVendor</tt>/<tt>idProduct</tt> combination. This function is intended |
| * for those scenarios where you are using libusb to knock up a quick test |
| * application - it allows you to avoid calling libusb_get_device_list() and |
| * worrying about traversing/freeing the list. |
| * |
| * This function has limitations and is hence not intended for use in real |
| * applications: if multiple devices have the same IDs it will only |
| * give you the first one, etc. |
| * |
| * \param ctx the context to operate on, or NULL for the default context |
| * \param vendor_id the idVendor value to search for |
| * \param product_id the idProduct value to search for |
| * \returns a device handle for the first found device, or NULL on error |
| * or if the device could not be found. */ |
| DEFAULT_VISIBILITY |
| libusb_device_handle * LIBUSB_CALL libusb_open_device_with_vid_pid( |
| libusb_context *ctx, uint16_t vendor_id, uint16_t product_id) |
| { |
| struct libusb_device **devs; |
| struct libusb_device *found = NULL; |
| struct libusb_device *dev; |
| struct libusb_device_handle *dev_handle = NULL; |
| size_t i = 0; |
| int r; |
| |
| if (libusb_get_device_list(ctx, &devs) < 0) |
| return NULL; |
| |
| while ((dev = devs[i++]) != NULL) { |
| struct libusb_device_descriptor desc; |
| r = libusb_get_device_descriptor(dev, &desc); |
| if (r < 0) |
| goto out; |
| if (desc.idVendor == vendor_id && desc.idProduct == product_id) { |
| found = dev; |
| break; |
| } |
| } |
| |
| if (found) { |
| r = libusb_open(found, &dev_handle); |
| if (r < 0) |
| dev_handle = NULL; |
| } |
| |
| out: |
| libusb_free_device_list(devs, 1); |
| return dev_handle; |
| } |
| |
| static void do_close(struct libusb_context *ctx, |
| struct libusb_device_handle *dev_handle) |
| { |
| struct usbi_transfer *itransfer; |
| struct usbi_transfer *tmp; |
| |
| /* remove any transfers in flight that are for this device */ |
| usbi_mutex_lock(&ctx->flying_transfers_lock); |
| |
| /* safe iteration because transfers may be being deleted */ |
| list_for_each_entry_safe(itransfer, tmp, &ctx->flying_transfers, list, struct usbi_transfer) { |
| struct libusb_transfer *transfer = |
| USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer); |
| |
| if (transfer->dev_handle != dev_handle) |
| continue; |
| |
| usbi_mutex_lock(&itransfer->lock); |
| if (!(itransfer->state_flags & USBI_TRANSFER_DEVICE_DISAPPEARED)) { |
| usbi_err(ctx, "Device handle closed while transfer was still being processed, but the device is still connected as far as we know"); |
| |
| if (itransfer->state_flags & USBI_TRANSFER_CANCELLING) |
| usbi_warn(ctx, "A cancellation for an in-flight transfer hasn't completed but closing the device handle"); |
| else |
| usbi_err(ctx, "A cancellation hasn't even been scheduled on the transfer for which the device is closing"); |
| } |
| usbi_mutex_unlock(&itransfer->lock); |
| |
| /* remove from the list of in-flight transfers and make sure |
| * we don't accidentally use the device handle in the future |
| * (or that such accesses will be easily caught and identified as a crash) |
| */ |
| list_del(&itransfer->list); |
| transfer->dev_handle = NULL; |
| |
| /* it is up to the user to free up the actual transfer struct. this is |
| * just making sure that we don't attempt to process the transfer after |
| * the device handle is invalid |
| */ |
| usbi_dbg("Removed transfer %p from the in-flight list because device handle %p closed", |
| transfer, dev_handle); |
| } |
| usbi_mutex_unlock(&ctx->flying_transfers_lock); |
| |
| usbi_mutex_lock(&ctx->open_devs_lock); |
| list_del(&dev_handle->list); |
| usbi_mutex_unlock(&ctx->open_devs_lock); |
| |
| usbi_backend.close(dev_handle); |
| libusb_unref_device(dev_handle->dev); |
| usbi_mutex_destroy(&dev_handle->lock); |
| free(dev_handle); |
| } |
| |
| /** \ingroup libusb_dev |
| * Close a device handle. Should be called on all open handles before your |
| * application exits. |
| * |
| * Internally, this function destroys the reference that was added by |
| * libusb_open() on the given device. |
| * |
| * This is a non-blocking function; no requests are sent over the bus. |
| * |
| * \param dev_handle the device handle to close |
| */ |
| void API_EXPORTED libusb_close(libusb_device_handle *dev_handle) |
| { |
| struct libusb_context *ctx; |
| int handling_events; |
| int pending_events; |
| |
| if (!dev_handle) |
| return; |
| usbi_dbg(" "); |
| |
| ctx = HANDLE_CTX(dev_handle); |
| handling_events = usbi_handling_events(ctx); |
| |
| /* Similarly to libusb_open(), we want to interrupt all event handlers |
| * at this point. More importantly, we want to perform the actual close of |
| * the device while holding the event handling lock (preventing any other |
| * thread from doing event handling) because we will be removing a file |
| * descriptor from the polling loop. If this is being called by the current |
| * event handler, we can bypass the interruption code because we already |
| * hold the event handling lock. */ |
| |
| if (!handling_events) { |
| /* Record that we are closing a device. |
| * Only signal an event if there are no prior pending events. */ |
| usbi_mutex_lock(&ctx->event_data_lock); |
| pending_events = usbi_pending_events(ctx); |
| ctx->device_close++; |
| if (!pending_events) |
| usbi_signal_event(ctx); |
| usbi_mutex_unlock(&ctx->event_data_lock); |
| |
| /* take event handling lock */ |
| libusb_lock_events(ctx); |
| } |
| |
| /* Close the device */ |
| do_close(ctx, dev_handle); |
| |
| if (!handling_events) { |
| /* We're done with closing this device. |
| * Clear the event pipe if there are no further pending events. */ |
| usbi_mutex_lock(&ctx->event_data_lock); |
| ctx->device_close--; |
| pending_events = usbi_pending_events(ctx); |
| if (!pending_events) |
| usbi_clear_event(ctx); |
| usbi_mutex_unlock(&ctx->event_data_lock); |
| |
| /* Release event handling lock and wake up event waiters */ |
| libusb_unlock_events(ctx); |
| } |
| } |
| |
| /** \ingroup libusb_dev |
| * Get the underlying device for a device handle. This function does not modify |
| * the reference count of the returned device, so do not feel compelled to |
| * unreference it when you are done. |
| * \param dev_handle a device handle |
| * \returns the underlying device |
| */ |
| DEFAULT_VISIBILITY |
| libusb_device * LIBUSB_CALL libusb_get_device(libusb_device_handle *dev_handle) |
| { |
| return dev_handle->dev; |
| } |
| |
| /** \ingroup libusb_dev |
| * Determine the bConfigurationValue of the currently active configuration. |
| * |
| * You could formulate your own control request to obtain this information, |
| * but this function has the advantage that it may be able to retrieve the |
| * information from operating system caches (no I/O involved). |
| * |
| * If the OS does not cache this information, then this function will block |
| * while a control transfer is submitted to retrieve the information. |
| * |
| * This function will return a value of 0 in the <tt>config</tt> output |
| * parameter if the device is in unconfigured state. |
| * |
| * \param dev_handle a device handle |
| * \param config output location for the bConfigurationValue of the active |
| * configuration (only valid for return code 0) |
| * \returns 0 on success |
| * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected |
| * \returns another LIBUSB_ERROR code on other failure |
| */ |
| int API_EXPORTED libusb_get_configuration(libusb_device_handle *dev_handle, |
| int *config) |
| { |
| int r = LIBUSB_ERROR_NOT_SUPPORTED; |
| |
| usbi_dbg(" "); |
| if (usbi_backend.get_configuration) |
| r = usbi_backend.get_configuration(dev_handle, config); |
| |
| if (r == LIBUSB_ERROR_NOT_SUPPORTED) { |
| uint8_t tmp = 0; |
| usbi_dbg("falling back to control message"); |
| r = libusb_control_transfer(dev_handle, LIBUSB_ENDPOINT_IN, |
| LIBUSB_REQUEST_GET_CONFIGURATION, 0, 0, &tmp, 1, 1000); |
| if (r == 0) { |
| usbi_err(HANDLE_CTX(dev_handle), "zero bytes returned in ctrl transfer?"); |
| r = LIBUSB_ERROR_IO; |
| } else if (r == 1) { |
| r = 0; |
| *config = tmp; |
| } else { |
| usbi_dbg("control failed, error %d", r); |
| } |
| } |
| |
| if (r == 0) |
| usbi_dbg("active config %d", *config); |
| |
| return r; |
| } |
| |
| /** \ingroup libusb_dev |
| * Set the active configuration for a device. |
| * |
| * The operating system may or may not have already set an active |
| * configuration on the device. It is up to your application to ensure the |
| * correct configuration is selected before you attempt to claim interfaces |
| * and perform other operations. |
| * |
| * If you call this function on a device already configured with the selected |
| * configuration, then this function will act as a lightweight device reset: |
| * it will issue a SET_CONFIGURATION request using the current configuration, |
| * causing most USB-related device state to be reset (altsetting reset to zero, |
| * endpoint halts cleared, toggles reset). |
| * |
| * You cannot change/reset configuration if your application has claimed |
| * interfaces. It is advised to set the desired configuration before claiming |
| * interfaces. |
| * |
| * Alternatively you can call libusb_release_interface() first. Note if you |
| * do things this way you must ensure that auto_detach_kernel_driver for |
| * <tt>dev</tt> is 0, otherwise the kernel driver will be re-attached when you |
| * release the interface(s). |
| * |
| * You cannot change/reset configuration if other applications or drivers have |
| * claimed interfaces. |
| * |
| * A configuration value of -1 will put the device in unconfigured state. |
| * The USB specifications state that a configuration value of 0 does this, |
| * however buggy devices exist which actually have a configuration 0. |
| * |
| * You should always use this function rather than formulating your own |
| * SET_CONFIGURATION control request. This is because the underlying operating |
| * system needs to know when such changes happen. |
| * |
| * This is a blocking function. |
| * |
| * \param dev_handle a device handle |
| * \param configuration the bConfigurationValue of the configuration you |
| * wish to activate, or -1 if you wish to put the device in an unconfigured |
| * state |
| * \returns 0 on success |
| * \returns LIBUSB_ERROR_NOT_FOUND if the requested configuration does not exist |
| * \returns LIBUSB_ERROR_BUSY if interfaces are currently claimed |
| * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected |
| * \returns another LIBUSB_ERROR code on other failure |
| * \see libusb_set_auto_detach_kernel_driver() |
| */ |
| int API_EXPORTED libusb_set_configuration(libusb_device_handle *dev_handle, |
| int configuration) |
| { |
| usbi_dbg("configuration %d", configuration); |
| if (configuration < -1 || configuration > UINT8_MAX) |
| return LIBUSB_ERROR_INVALID_PARAM; |
| return usbi_backend.set_configuration(dev_handle, configuration); |
| } |
| |
| /** \ingroup libusb_dev |
| * Claim an interface on a given device handle. You must claim the interface |
| * you wish to use before you can perform I/O on any of its endpoints. |
| * |
| * It is legal to attempt to claim an already-claimed interface, in which |
| * case libusb just returns 0 without doing anything. |
| * |
| * If auto_detach_kernel_driver is set to 1 for <tt>dev</tt>, the kernel driver |
| * will be detached if necessary, on failure the detach error is returned. |
| * |
| * Claiming of interfaces is a purely logical operation; it does not cause |
| * any requests to be sent over the bus. Interface claiming is used to |
| * instruct the underlying operating system that your application wishes |
| * to take ownership of the interface. |
| * |
| * This is a non-blocking function. |
| * |
| * \param dev_handle a device handle |
| * \param interface_number the <tt>bInterfaceNumber</tt> of the interface you |
| * wish to claim |
| * \returns 0 on success |
| * \returns LIBUSB_ERROR_NOT_FOUND if the requested interface does not exist |
| * \returns LIBUSB_ERROR_BUSY if another program or driver has claimed the |
| * interface |
| * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected |
| * \returns a LIBUSB_ERROR code on other failure |
| * \see libusb_set_auto_detach_kernel_driver() |
| */ |
| int API_EXPORTED libusb_claim_interface(libusb_device_handle *dev_handle, |
| int interface_number) |
| { |
| int r = 0; |
| |
| usbi_dbg("interface %d", interface_number); |
| if (interface_number < 0 || interface_number >= USB_MAXINTERFACES) |
| return LIBUSB_ERROR_INVALID_PARAM; |
| |
| if (!dev_handle->dev->attached) |
| return LIBUSB_ERROR_NO_DEVICE; |
| |
| usbi_mutex_lock(&dev_handle->lock); |
| if (dev_handle->claimed_interfaces & (1U << interface_number)) |
| goto out; |
| |
| r = usbi_backend.claim_interface(dev_handle, interface_number); |
| if (r == 0) |
| dev_handle->claimed_interfaces |= 1U << interface_number; |
| |
| out: |
| usbi_mutex_unlock(&dev_handle->lock); |
| return r; |
| } |
| |
| /** \ingroup libusb_dev |
| * Release an interface previously claimed with libusb_claim_interface(). You |
| * should release all claimed interfaces before closing a device handle. |
| * |
| * This is a blocking function. A SET_INTERFACE control request will be sent |
| * to the device, resetting interface state to the first alternate setting. |
| * |
| * If auto_detach_kernel_driver is set to 1 for <tt>dev</tt>, the kernel |
| * driver will be re-attached after releasing the interface. |
| * |
| * \param dev_handle a device handle |
| * \param interface_number the <tt>bInterfaceNumber</tt> of the |
| * previously-claimed interface |
| * \returns 0 on success |
| * \returns LIBUSB_ERROR_NOT_FOUND if the interface was not claimed |
| * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected |
| * \returns another LIBUSB_ERROR code on other failure |
| * \see libusb_set_auto_detach_kernel_driver() |
| */ |
| int API_EXPORTED libusb_release_interface(libusb_device_handle *dev_handle, |
| int interface_number) |
| { |
| int r; |
| |
| usbi_dbg("interface %d", interface_number); |
| if (interface_number < 0 || interface_number >= USB_MAXINTERFACES) |
| return LIBUSB_ERROR_INVALID_PARAM; |
| |
| usbi_mutex_lock(&dev_handle->lock); |
| if (!(dev_handle->claimed_interfaces & (1U << interface_number))) { |
| r = LIBUSB_ERROR_NOT_FOUND; |
| goto out; |
| } |
| |
| r = usbi_backend.release_interface(dev_handle, interface_number); |
| if (r == 0) |
| dev_handle->claimed_interfaces &= ~(1U << interface_number); |
| |
| out: |
| usbi_mutex_unlock(&dev_handle->lock); |
| return r; |
| } |
| |
| /** \ingroup libusb_dev |
| * Activate an alternate setting for an interface. The interface must have |
| * been previously claimed with libusb_claim_interface(). |
| * |
| * You should always use this function rather than formulating your own |
| * SET_INTERFACE control request. This is because the underlying operating |
| * system needs to know when such changes happen. |
| * |
| * This is a blocking function. |
| * |
| * \param dev_handle a device handle |
| * \param interface_number the <tt>bInterfaceNumber</tt> of the |
| * previously-claimed interface |
| * \param alternate_setting the <tt>bAlternateSetting</tt> of the alternate |
| * setting to activate |
| * \returns 0 on success |
| * \returns LIBUSB_ERROR_NOT_FOUND if the interface was not claimed, or the |
| * requested alternate setting does not exist |
| * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected |
| * \returns another LIBUSB_ERROR code on other failure |
| */ |
| int API_EXPORTED libusb_set_interface_alt_setting(libusb_device_handle *dev_handle, |
| int interface_number, int alternate_setting) |
| { |
| usbi_dbg("interface %d altsetting %d", |
| interface_number, alternate_setting); |
| if (interface_number < 0 || interface_number >= USB_MAXINTERFACES) |
| return LIBUSB_ERROR_INVALID_PARAM; |
| if (alternate_setting < 0 || alternate_setting > UINT8_MAX) |
| return LIBUSB_ERROR_INVALID_PARAM; |
| |
| usbi_mutex_lock(&dev_handle->lock); |
| if (!dev_handle->dev->attached) { |
| usbi_mutex_unlock(&dev_handle->lock); |
| return LIBUSB_ERROR_NO_DEVICE; |
| } |
| |
| if (!(dev_handle->claimed_interfaces & (1U << interface_number))) { |
| usbi_mutex_unlock(&dev_handle->lock); |
| return LIBUSB_ERROR_NOT_FOUND; |
| } |
| usbi_mutex_unlock(&dev_handle->lock); |
| |
| return usbi_backend.set_interface_altsetting(dev_handle, interface_number, |
| alternate_setting); |
| } |
| |
| /** \ingroup libusb_dev |
| * Clear the halt/stall condition for an endpoint. Endpoints with halt status |
| * are unable to receive or transmit data until the halt condition is stalled. |
| * |
| * You should cancel all pending transfers before attempting to clear the halt |
| * condition. |
| * |
| * This is a blocking function. |
| * |
| * \param dev_handle a device handle |
| * \param endpoint the endpoint to clear halt status |
| * \returns 0 on success |
| * \returns LIBUSB_ERROR_NOT_FOUND if the endpoint does not exist |
| * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected |
| * \returns another LIBUSB_ERROR code on other failure |
| */ |
| int API_EXPORTED libusb_clear_halt(libusb_device_handle *dev_handle, |
| unsigned char endpoint) |
| { |
| usbi_dbg("endpoint %x", endpoint); |
| if (!dev_handle->dev->attached) |
| return LIBUSB_ERROR_NO_DEVICE; |
| |
| return usbi_backend.clear_halt(dev_handle, endpoint); |
| } |
| |
| /** \ingroup libusb_dev |
| * Perform a USB port reset to reinitialize a device. The system will attempt |
| * to restore the previous configuration and alternate settings after the |
| * reset has completed. |
| * |
| * If the reset fails, the descriptors change, or the previous state cannot be |
| * restored, the device will appear to be disconnected and reconnected. This |
| * means that the device handle is no longer valid (you should close it) and |
| * rediscover the device. A return code of LIBUSB_ERROR_NOT_FOUND indicates |
| * when this is the case. |
| * |
| * This is a blocking function which usually incurs a noticeable delay. |
| * |
| * \param dev_handle a handle of the device to reset |
| * \returns 0 on success |
| * \returns LIBUSB_ERROR_NOT_FOUND if re-enumeration is required, or if the |
| * device has been disconnected |
| * \returns another LIBUSB_ERROR code on other failure |
| */ |
| int API_EXPORTED libusb_reset_device(libusb_device_handle *dev_handle) |
| { |
| usbi_dbg(" "); |
| if (!dev_handle->dev->attached) |
| return LIBUSB_ERROR_NO_DEVICE; |
| |
| if (usbi_backend.reset_device) |
| return usbi_backend.reset_device(dev_handle); |
| else |
| return LIBUSB_ERROR_NOT_SUPPORTED; |
| } |
| |
| /** \ingroup libusb_asyncio |
| * Allocate up to num_streams usb bulk streams on the specified endpoints. This |
| * function takes an array of endpoints rather then a single endpoint because |
| * some protocols require that endpoints are setup with similar stream ids. |
| * All endpoints passed in must belong to the same interface. |
| * |
| * Note this function may return less streams then requested. Also note that the |
| * same number of streams are allocated for each endpoint in the endpoint array. |
| * |
| * Stream id 0 is reserved, and should not be used to communicate with devices. |
| * If libusb_alloc_streams() returns with a value of N, you may use stream ids |
| * 1 to N. |
| * |
| * Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103 |
| * |
| * \param dev_handle a device handle |
| * \param num_streams number of streams to try to allocate |
| * \param endpoints array of endpoints to allocate streams on |
| * \param num_endpoints length of the endpoints array |
| * \returns number of streams allocated, or a LIBUSB_ERROR code on failure |
| */ |
| int API_EXPORTED libusb_alloc_streams(libusb_device_handle *dev_handle, |
| uint32_t num_streams, unsigned char *endpoints, int num_endpoints) |
| { |
| usbi_dbg("streams %u eps %d", (unsigned)num_streams, num_endpoints); |
| |
| if (!num_streams || !endpoints || num_endpoints <= 0) |
| return LIBUSB_ERROR_INVALID_PARAM; |
| |
| if (!dev_handle->dev->attached) |
| return LIBUSB_ERROR_NO_DEVICE; |
| |
| if (usbi_backend.alloc_streams) |
| return usbi_backend.alloc_streams(dev_handle, num_streams, endpoints, |
| num_endpoints); |
| else |
| return LIBUSB_ERROR_NOT_SUPPORTED; |
| } |
| |
| /** \ingroup libusb_asyncio |
| * Free usb bulk streams allocated with libusb_alloc_streams(). |
| * |
| * Note streams are automatically free-ed when releasing an interface. |
| * |
| * Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103 |
| * |
| * \param dev_handle a device handle |
| * \param endpoints array of endpoints to free streams on |
| * \param num_endpoints length of the endpoints array |
| * \returns LIBUSB_SUCCESS, or a LIBUSB_ERROR code on failure |
| */ |
| int API_EXPORTED libusb_free_streams(libusb_device_handle *dev_handle, |
| unsigned char *endpoints, int num_endpoints) |
| { |
| usbi_dbg("eps %d", num_endpoints); |
| |
| if (!endpoints || num_endpoints <= 0) |
| return LIBUSB_ERROR_INVALID_PARAM; |
| |
| if (!dev_handle->dev->attached) |
| return LIBUSB_ERROR_NO_DEVICE; |
| |
| if (usbi_backend.free_streams) |
| return usbi_backend.free_streams(dev_handle, endpoints, |
| num_endpoints); |
| else |
| return LIBUSB_ERROR_NOT_SUPPORTED; |
| } |
| |
| /** \ingroup libusb_asyncio |
| * Attempts to allocate a block of persistent DMA memory suitable for transfers |
| * against the given device. If successful, will return a block of memory |
| * that is suitable for use as "buffer" in \ref libusb_transfer against this |
| * device. Using this memory instead of regular memory means that the host |
| * controller can use DMA directly into the buffer to increase performance, and |
| * also that transfers can no longer fail due to kernel memory fragmentation. |
| * |
| * Note that this means you should not modify this memory (or even data on |
| * the same cache lines) when a transfer is in progress, although it is legal |
| * to have several transfers going on within the same memory block. |
| * |
| * Will return NULL on failure. Many systems do not support such zerocopy |
| * and will always return NULL. Memory allocated with this function must be |
| * freed with \ref libusb_dev_mem_free. Specifically, this means that the |
| * flag \ref LIBUSB_TRANSFER_FREE_BUFFER cannot be used to free memory allocated |
| * with this function. |
| * |
| * Since version 1.0.21, \ref LIBUSB_API_VERSION >= 0x01000105 |
| * |
| * \param dev_handle a device handle |
| * \param length size of desired data buffer |
| * \returns a pointer to the newly allocated memory, or NULL on failure |
| */ |
| DEFAULT_VISIBILITY |
| unsigned char * LIBUSB_CALL libusb_dev_mem_alloc(libusb_device_handle *dev_handle, |
| size_t length) |
| { |
| if (!dev_handle->dev->attached) |
| return NULL; |
| |
| if (usbi_backend.dev_mem_alloc) |
| return usbi_backend.dev_mem_alloc(dev_handle, length); |
| else |
| return NULL; |
| } |
| |
| /** \ingroup libusb_asyncio |
| * Free device memory allocated with libusb_dev_mem_alloc(). |
| * |
| * \param dev_handle a device handle |
| * \param buffer pointer to the previously allocated memory |
| * \param length size of previously allocated memory |
| * \returns LIBUSB_SUCCESS, or a LIBUSB_ERROR code on failure |
| */ |
| int API_EXPORTED libusb_dev_mem_free(libusb_device_handle *dev_handle, |
| unsigned char *buffer, size_t length) |
| { |
| if (usbi_backend.dev_mem_free) |
| return usbi_backend.dev_mem_free(dev_handle, buffer, length); |
| else |
| return LIBUSB_ERROR_NOT_SUPPORTED; |
| } |
| |
| /** \ingroup libusb_dev |
| * Determine if a kernel driver is active on an interface. If a kernel driver |
| * is active, you cannot claim the interface, and libusb will be unable to |
| * perform I/O. |
| * |
| * This functionality is not available on Windows. |
| * |
| * \param dev_handle a device handle |
| * \param interface_number the interface to check |
| * \returns 0 if no kernel driver is active |
| * \returns 1 if a kernel driver is active |
| * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected |
| * \returns LIBUSB_ERROR_NOT_SUPPORTED on platforms where the functionality |
| * is not available |
| * \returns another LIBUSB_ERROR code on other failure |
| * \see libusb_detach_kernel_driver() |
| */ |
| int API_EXPORTED libusb_kernel_driver_active(libusb_device_handle *dev_handle, |
| int interface_number) |
| { |
| usbi_dbg("interface %d", interface_number); |
| |
| if (interface_number < 0 || interface_number >= USB_MAXINTERFACES) |
| return LIBUSB_ERROR_INVALID_PARAM; |
| |
| if (!dev_handle->dev->attached) |
| return LIBUSB_ERROR_NO_DEVICE; |
| |
| if (usbi_backend.kernel_driver_active) |
| return usbi_backend.kernel_driver_active(dev_handle, interface_number); |
| else |
| return LIBUSB_ERROR_NOT_SUPPORTED; |
| } |
| |
| /** \ingroup libusb_dev |
| * Detach a kernel driver from an interface. If successful, you will then be |
| * able to claim the interface and perform I/O. |
| * |
| * This functionality is not available on Darwin or Windows. |
| * |
| * Note that libusb itself also talks to the device through a special kernel |
| * driver, if this driver is already attached to the device, this call will |
| * not detach it and return LIBUSB_ERROR_NOT_FOUND. |
| * |
| * \param dev_handle a device handle |
| * \param interface_number the interface to detach the driver from |
| * \returns 0 on success |
| * \returns LIBUSB_ERROR_NOT_FOUND if no kernel driver was active |
| * \returns LIBUSB_ERROR_INVALID_PARAM if the interface does not exist |
| * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected |
| * \returns LIBUSB_ERROR_NOT_SUPPORTED on platforms where the functionality |
| * is not available |
| * \returns another LIBUSB_ERROR code on other failure |
| * \see libusb_kernel_driver_active() |
| */ |
| int API_EXPORTED libusb_detach_kernel_driver(libusb_device_handle *dev_handle, |
| int interface_number) |
| { |
| usbi_dbg("interface %d", interface_number); |
| |
| if (interface_number < 0 || interface_number >= USB_MAXINTERFACES) |
| return LIBUSB_ERROR_INVALID_PARAM; |
| |
| if (!dev_handle->dev->attached) |
| return LIBUSB_ERROR_NO_DEVICE; |
| |
| if (usbi_backend.detach_kernel_driver) |
| return usbi_backend.detach_kernel_driver(dev_handle, interface_number); |
| else |
| return LIBUSB_ERROR_NOT_SUPPORTED; |
| } |
| |
| /** \ingroup libusb_dev |
| * Re-attach an interface's kernel driver, which was previously detached |
| * using libusb_detach_kernel_driver(). This call is only effective on |
| * Linux and returns LIBUSB_ERROR_NOT_SUPPORTED on all other platforms. |
| * |
| * This functionality is not available on Darwin or Windows. |
| * |
| * \param dev_handle a device handle |
| * \param interface_number the interface to attach the driver from |
| * \returns 0 on success |
| * \returns LIBUSB_ERROR_NOT_FOUND if no kernel driver was active |
| * \returns LIBUSB_ERROR_INVALID_PARAM if the interface does not exist |
| * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected |
| * \returns LIBUSB_ERROR_NOT_SUPPORTED on platforms where the functionality |
| * is not available |
| * \returns LIBUSB_ERROR_BUSY if the driver cannot be attached because the |
| * interface is claimed by a program or driver |
| * \returns another LIBUSB_ERROR code on other failure |
| * \see libusb_kernel_driver_active() |
| */ |
| int API_EXPORTED libusb_attach_kernel_driver(libusb_device_handle *dev_handle, |
| int interface_number) |
| { |
| usbi_dbg("interface %d", interface_number); |
| |
| if (interface_number < 0 || interface_number >= USB_MAXINTERFACES) |
| return LIBUSB_ERROR_INVALID_PARAM; |
| |
| if (!dev_handle->dev->attached) |
| return LIBUSB_ERROR_NO_DEVICE; |
| |
| if (usbi_backend.attach_kernel_driver) |
| return usbi_backend.attach_kernel_driver(dev_handle, interface_number); |
| else |
| return LIBUSB_ERROR_NOT_SUPPORTED; |
| } |
| |
| /** \ingroup libusb_dev |
| * Enable/disable libusb's automatic kernel driver detachment. When this is |
| * enabled libusb will automatically detach the kernel driver on an interface |
| * when claiming the interface, and attach it when releasing the interface. |
| * |
| * Automatic kernel driver detachment is disabled on newly opened device |
| * handles by default. |
| * |
| * On platforms which do not have LIBUSB_CAP_SUPPORTS_DETACH_KERNEL_DRIVER |
| * this function will return LIBUSB_ERROR_NOT_SUPPORTED, and libusb will |
| * continue as if this function was never called. |
| * |
| * \param dev_handle a device handle |
| * \param enable whether to enable or disable auto kernel driver detachment |
| * |
| * \returns LIBUSB_SUCCESS on success |
| * \returns LIBUSB_ERROR_NOT_SUPPORTED on platforms where the functionality |
| * is not available |
| * \see libusb_claim_interface() |
| * \see libusb_release_interface() |
| * \see libusb_set_configuration() |
| */ |
| int API_EXPORTED libusb_set_auto_detach_kernel_driver( |
| libusb_device_handle *dev_handle, int enable) |
| { |
| if (!(usbi_backend.caps & USBI_CAP_SUPPORTS_DETACH_KERNEL_DRIVER)) |
| return LIBUSB_ERROR_NOT_SUPPORTED; |
| |
| dev_handle->auto_detach_kernel_driver = enable; |
| return LIBUSB_SUCCESS; |
| } |
| |
| /** \ingroup libusb_lib |
| * \deprecated Use libusb_set_option() instead using the |
| * \ref LIBUSB_OPTION_LOG_LEVEL option. |
| */ |
| void API_EXPORTED libusb_set_debug(libusb_context *ctx, int level) |
| { |
| #if defined(ENABLE_LOGGING) && !defined(ENABLE_DEBUG_LOGGING) |
| ctx = usbi_get_context(ctx); |
| if (!ctx->debug_fixed) { |
| level = CLAMP(level, LIBUSB_LOG_LEVEL_NONE, LIBUSB_LOG_LEVEL_DEBUG); |
| ctx->debug = (enum libusb_log_level)level; |
| } |
| #else |
| UNUSED(ctx); |
| UNUSED(level); |
| #endif |
| } |
| |
| /** \ingroup libusb_lib |
| * Set log handler. |
| * |
| * libusb will redirect its log messages to the provided callback function. |
| * libusb supports redirection of per context and global log messages. |
| * Log messages sent to the context will be sent to the global log handler too. |
| * |
| * If libusb is compiled without message logging or USE_SYSTEM_LOGGING_FACILITY |
| * is defined then global callback function will never be called. |
| * If ENABLE_DEBUG_LOGGING is defined then per context callback function will |
| * never be called. |
| * |
| * \param ctx context on which to assign log handler, or NULL for the default |
| * context. Parameter ignored if only LIBUSB_LOG_CB_GLOBAL mode is requested. |
| * \param cb pointer to the callback function, or NULL to stop log |
| * messages redirection |
| * \param mode mode of callback function operation. Several modes can be |
| * selected for a single callback function, see \ref libusb_log_cb_mode for |
| * a description. |
| * \see libusb_log_cb, libusb_log_cb_mode |
| */ |
| void API_EXPORTED libusb_set_log_cb(libusb_context *ctx, libusb_log_cb cb, |
| int mode) |
| { |
| #if defined(ENABLE_LOGGING) && (!defined(ENABLE_DEBUG_LOGGING) || !defined(USE_SYSTEM_LOGGING_FACILITY)) |
| #if !defined(USE_SYSTEM_LOGGING_FACILITY) |
| if (mode & LIBUSB_LOG_CB_GLOBAL) |
| log_handler = cb; |
| #endif |
| #if !defined(ENABLE_DEBUG_LOGGING) |
| if (mode & LIBUSB_LOG_CB_CONTEXT) { |
| ctx = usbi_get_context(ctx); |
| ctx->log_handler = cb; |
| } |
| #else |
| UNUSED(ctx); |
| #endif |
| #else |
| UNUSED(ctx); |
| UNUSED(cb); |
| UNUSED(mode); |
| #endif |
| } |
| |
| /** \ingroup libusb_lib |
| * Set an option in the library. |
| * |
| * Use this function to configure a specific option within the library. |
| * |
| * Some options require one or more arguments to be provided. Consult each |
| * option's documentation for specific requirements. |
| * |
| * Since version 1.0.22, \ref LIBUSB_API_VERSION >= 0x01000106 |
| * |
| * \param ctx context on which to operate |
| * \param option which option to set |
| * \param ... any required arguments for the specified option |
| * |
| * \returns LIBUSB_SUCCESS on success |
| * \returns LIBUSB_ERROR_INVALID_PARAM if the option or arguments are invalid |
| * \returns LIBUSB_ERROR_NOT_SUPPORTED if the option is valid but not supported |
| * on this platform |
| */ |
| int API_EXPORTED libusb_set_option(libusb_context *ctx, |
| enum libusb_option option, ...) |
| { |
| int arg, r = LIBUSB_SUCCESS; |
| va_list ap; |
| |
| ctx = usbi_get_context(ctx); |
| |
| va_start(ap, option); |
| switch (option) { |
| case LIBUSB_OPTION_LOG_LEVEL: |
| arg = va_arg(ap, int); |
| if (arg < LIBUSB_LOG_LEVEL_NONE || arg > LIBUSB_LOG_LEVEL_DEBUG) { |
| r = LIBUSB_ERROR_INVALID_PARAM; |
| break; |
| } |
| #if defined(ENABLE_LOGGING) && !defined(ENABLE_DEBUG_LOGGING) |
| if (!ctx->debug_fixed) |
| ctx->debug = (enum libusb_log_level)arg; |
| #endif |
| break; |
| |
| /* Handle all backend-specific options here */ |
| case LIBUSB_OPTION_USE_USBDK: |
| if (usbi_backend.set_option) |
| r = usbi_backend.set_option(ctx, option, ap); |
| else |
| r = LIBUSB_ERROR_NOT_SUPPORTED; |
| break; |
| |
| default: |
| r = LIBUSB_ERROR_INVALID_PARAM; |
| } |
| va_end(ap); |
| |
| return r; |
| } |
| |
| #if defined(ENABLE_LOGGING) && !defined(ENABLE_DEBUG_LOGGING) |
| /* returns the log level as defined in the LIBUSB_DEBUG environment variable. |
| * if LIBUSB_DEBUG is not present or not a number, returns LIBUSB_LOG_LEVEL_NONE. |
| * value is clamped to ensure it is within the valid range of possibilities. |
| */ |
| static enum libusb_log_level get_env_debug_level(void) |
| { |
| const char *dbg = getenv("LIBUSB_DEBUG"); |
| enum libusb_log_level level; |
| if (dbg) { |
| int dbg_level = atoi(dbg); |
| dbg_level = CLAMP(dbg_level, LIBUSB_LOG_LEVEL_NONE, LIBUSB_LOG_LEVEL_DEBUG); |
| level = (enum libusb_log_level)dbg_level; |
| } else { |
| level = LIBUSB_LOG_LEVEL_NONE; |
| } |
| return level; |
| } |
| #endif |
| |
| /** \ingroup libusb_lib |
| * Initialize libusb. This function must be called before calling any other |
| * libusb function. |
| * |
| * If you do not provide an output location for a context pointer, a default |
| * context will be created. If there was already a default context, it will |
| * be reused (and nothing will be initialized/reinitialized). |
| * |
| * \param context Optional output location for context pointer. |
| * Only valid on return code 0. |
| * \returns 0 on success, or a LIBUSB_ERROR code on failure |
| * \see libusb_contexts |
| */ |
| int API_EXPORTED libusb_init(libusb_context **context) |
| { |
| struct libusb_device *dev, *next; |
| size_t priv_size = usbi_backend.context_priv_size; |
| struct libusb_context *ctx; |
| static int first_init = 1; |
| int r = 0; |
| |
| usbi_mutex_static_lock(&default_context_lock); |
| |
| if (!timestamp_origin.tv_sec) { |
| usbi_clock_gettime(USBI_CLOCK_REALTIME, ×tamp_origin); |
| } |
| |
| if (!context && usbi_default_context) { |
| usbi_dbg("reusing default context"); |
| default_context_refcnt++; |
| usbi_mutex_static_unlock(&default_context_lock); |
| return 0; |
| } |
| |
| ctx = calloc(1, PTR_ALIGN(sizeof(*ctx)) + priv_size); |
| if (!ctx) { |
| r = LIBUSB_ERROR_NO_MEM; |
| goto err_unlock; |
| } |
| |
| #if defined(ENABLE_LOGGING) && !defined(ENABLE_DEBUG_LOGGING) |
| ctx->debug = get_env_debug_level(); |
| if (ctx->debug != LIBUSB_LOG_LEVEL_NONE) |
| ctx->debug_fixed = 1; |
| #endif |
| |
| /* default context should be initialized before calling usbi_dbg */ |
| if (!usbi_default_context) { |
| usbi_default_context = ctx; |
| default_context_refcnt++; |
| usbi_dbg("created default context"); |
| } |
| |
| usbi_dbg("libusb v%u.%u.%u.%u%s", libusb_version_internal.major, libusb_version_internal.minor, |
| libusb_version_internal.micro, libusb_version_internal.nano, libusb_version_internal.rc); |
| |
| usbi_mutex_init(&ctx->usb_devs_lock); |
| usbi_mutex_init(&ctx->open_devs_lock); |
| usbi_mutex_init(&ctx->hotplug_cbs_lock); |
| list_init(&ctx->usb_devs); |
| list_init(&ctx->open_devs); |
| list_init(&ctx->hotplug_cbs); |
| ctx->next_hotplug_cb_handle = 1; |
| |
| usbi_mutex_static_lock(&active_contexts_lock); |
| if (first_init) { |
| first_init = 0; |
| list_init(&active_contexts_list); |
| } |
| list_add (&ctx->list, &active_contexts_list); |
| usbi_mutex_static_unlock(&active_contexts_lock); |
| |
| if (usbi_backend.init) { |
| r = usbi_backend.init(ctx); |
| if (r) |
| goto err_free_ctx; |
| } |
| |
| r = usbi_io_init(ctx); |
| if (r < 0) |
| goto err_backend_exit; |
| |
| usbi_mutex_static_unlock(&default_context_lock); |
| |
| if (context) |
| *context = ctx; |
| |
| return 0; |
| |
| err_backend_exit: |
| if (usbi_backend.exit) |
| usbi_backend.exit(ctx); |
| err_free_ctx: |
| if (ctx == usbi_default_context) { |
| usbi_default_context = NULL; |
| default_context_refcnt--; |
| } |
| |
| usbi_mutex_static_lock(&active_contexts_lock); |
| list_del(&ctx->list); |
| usbi_mutex_static_unlock(&active_contexts_lock); |
| |
| usbi_mutex_lock(&ctx->usb_devs_lock); |
| list_for_each_entry_safe(dev, next, &ctx->usb_devs, list, struct libusb_device) { |
| list_del(&dev->list); |
| libusb_unref_device(dev); |
| } |
| usbi_mutex_unlock(&ctx->usb_devs_lock); |
| |
| usbi_mutex_destroy(&ctx->open_devs_lock); |
| usbi_mutex_destroy(&ctx->usb_devs_lock); |
| usbi_mutex_destroy(&ctx->hotplug_cbs_lock); |
| |
| free(ctx); |
| err_unlock: |
| usbi_mutex_static_unlock(&default_context_lock); |
| return r; |
| } |
| |
| /** \ingroup libusb_lib |
| * Deinitialize libusb. Should be called after closing all open devices and |
| * before your application terminates. |
| * \param ctx the context to deinitialize, or NULL for the default context |
| */ |
| void API_EXPORTED libusb_exit(struct libusb_context *ctx) |
| { |
| struct libusb_device *dev, *next; |
| struct timeval tv = { 0, 0 }; |
| int destroying_default_context = 0; |
| |
| usbi_dbg(" "); |
| |
| ctx = usbi_get_context(ctx); |
| |
| /* if working with default context, only actually do the deinitialization |
| * if we're the last user */ |
| usbi_mutex_static_lock(&default_context_lock); |
| if (ctx == usbi_default_context) { |
| if (!usbi_default_context) { |
| usbi_dbg("no default context, not initialized?"); |
| usbi_mutex_static_unlock(&default_context_lock); |
| return; |
| } |
| |
| if (--default_context_refcnt > 0) { |
| usbi_dbg("not destroying default context"); |
| usbi_mutex_static_unlock(&default_context_lock); |
| return; |
| } |
| usbi_dbg("destroying default context"); |
| |
| /* |
| * Setting this flag without unlocking the default context, as |
| * we are actually destroying the default context. |
| * usbi_default_context is not set to NULL yet, as all activities |
| * would only stop after usbi_backend->exit() returns. |
| */ |
| destroying_default_context = 1; |
| } else { |
| /* Unlock default context, as we're not modifying it. */ |
| usbi_mutex_static_unlock(&default_context_lock); |
| } |
| |
| usbi_mutex_static_lock(&active_contexts_lock); |
| list_del(&ctx->list); |
| usbi_mutex_static_unlock(&active_contexts_lock); |
| |
| if (libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) { |
| usbi_hotplug_deregister(ctx, 1); |
| |
| /* |
| * Ensure any pending unplug events are read from the hotplug |
| * pipe. The usb_device-s hold in the events are no longer part |
| * of usb_devs, but the events still hold a reference! |
| * |
| * Note we don't do this if the application has left devices |
| * open (which implies a buggy app) to avoid packet completion |
| * handlers running when the app does not expect them to run. |
| */ |
| if (list_empty(&ctx->open_devs)) |
| libusb_handle_events_timeout(ctx, &tv); |
| |
| usbi_mutex_lock(&ctx->usb_devs_lock); |
| list_for_each_entry_safe(dev, next, &ctx->usb_devs, list, struct libusb_device) { |
| list_del(&dev->list); |
| libusb_unref_device(dev); |
| } |
| usbi_mutex_unlock(&ctx->usb_devs_lock); |
| } |
| |
| /* a few sanity checks. don't bother with locking because unless |
| * there is an application bug, nobody will be accessing these. */ |
| if (!list_empty(&ctx->usb_devs)) |
| usbi_warn(ctx, "some libusb_devices were leaked"); |
| if (!list_empty(&ctx->open_devs)) |
| usbi_warn(ctx, "application left some devices open"); |
| |
| usbi_io_exit(ctx); |
| if (usbi_backend.exit) |
| usbi_backend.exit(ctx); |
| |
| usbi_mutex_destroy(&ctx->open_devs_lock); |
| usbi_mutex_destroy(&ctx->usb_devs_lock); |
| usbi_mutex_destroy(&ctx->hotplug_cbs_lock); |
| free(ctx); |
| |
| if (destroying_default_context) { |
| usbi_default_context = NULL; |
| usbi_mutex_static_unlock(&default_context_lock); |
| } |
| } |
| |
| /** \ingroup libusb_misc |
| * Check at runtime if the loaded library has a given capability. |
| * This call should be performed after \ref libusb_init(), to ensure the |
| * backend has updated its capability set. |
| * |
| * \param capability the \ref libusb_capability to check for |
| * \returns nonzero if the running library has the capability, 0 otherwise |
| */ |
| int API_EXPORTED libusb_has_capability(uint32_t capability) |
| { |
| switch (capability) { |
| case LIBUSB_CAP_HAS_CAPABILITY: |
| return 1; |
| case LIBUSB_CAP_HAS_HOTPLUG: |
| return !(usbi_backend.get_device_list); |
| case LIBUSB_CAP_HAS_HID_ACCESS: |
| return (usbi_backend.caps & USBI_CAP_HAS_HID_ACCESS); |
| case LIBUSB_CAP_SUPPORTS_DETACH_KERNEL_DRIVER: |
| return (usbi_backend.caps & USBI_CAP_SUPPORTS_DETACH_KERNEL_DRIVER); |
| } |
| return 0; |
| } |
| |
| #ifdef ENABLE_LOGGING |
| |
| /* this is defined in libusbi.h if needed */ |
| #ifdef LIBUSB_PRINTF_WIN32 |
| /* |
| * Prior to VS2015, Microsoft did not provide the snprintf() function and |
| * provided a vsnprintf() that did not guarantee NULL-terminated output. |
| * Microsoft did provide a _snprintf() function, but again it did not |
| * guarantee NULL-terminated output. |
| * |
| * The below implementations guarantee NULL-terminated output and are |
| * C99 compliant. |
| */ |
| |
| int usbi_snprintf(char *str, size_t size, const char *format, ...) |
| { |
| va_list ap; |
| int ret; |
| |
| va_start(ap, format); |
| ret = usbi_vsnprintf(str, size, format, ap); |
| va_end(ap); |
| |
| return ret; |
| } |
| |
| int usbi_vsnprintf(char *str, size_t size, const char *format, va_list ap) |
| { |
| int ret; |
| |
| ret = _vsnprintf(str, size, format, ap); |
| if (ret < 0 || ret == (int)size) { |
| /* Output is truncated, ensure buffer is NULL-terminated and |
| * determine how many characters would have been written. */ |
| str[size - 1] = '\0'; |
| if (ret < 0) |
| ret = _vsnprintf(NULL, 0, format, ap); |
| } |
| |
| return ret; |
| } |
| #endif /* LIBUSB_PRINTF_WIN32 */ |
| |
| static void usbi_log_str(enum libusb_log_level level, const char *str) |
| { |
| #if defined(USE_SYSTEM_LOGGING_FACILITY) |
| #if defined(_WIN32) |
| #if !defined(UNICODE) |
| OutputDebugStringA(str); |
| #else |
| WCHAR wbuf[USBI_MAX_LOG_LEN]; |
| if (MultiByteToWideChar(CP_UTF8, 0, str, -1, wbuf, sizeof(wbuf)) != 0) |
| OutputDebugStringW(wbuf); |
| #endif |
| #elif defined(__ANDROID__) |
| int priority = ANDROID_LOG_UNKNOWN; |
| switch (level) { |
| case LIBUSB_LOG_LEVEL_NONE: return; |
| case LIBUSB_LOG_LEVEL_ERROR: priority = ANDROID_LOG_ERROR; break; |
| case LIBUSB_LOG_LEVEL_WARNING: priority = ANDROID_LOG_WARN; break; |
| case LIBUSB_LOG_LEVEL_INFO: priority = ANDROID_LOG_INFO; break; |
| case LIBUSB_LOG_LEVEL_DEBUG: priority = ANDROID_LOG_DEBUG; break; |
| } |
| __android_log_write(priority, "libusb", str); |
| #elif defined(HAVE_SYSLOG) |
| int syslog_level = LOG_INFO; |
| switch (level) { |
| case LIBUSB_LOG_LEVEL_NONE: return; |
| case LIBUSB_LOG_LEVEL_ERROR: syslog_level = LOG_ERR; break; |
| case LIBUSB_LOG_LEVEL_WARNING: syslog_level = LOG_WARNING; break; |
| case LIBUSB_LOG_LEVEL_INFO: syslog_level = LOG_INFO; break; |
| case LIBUSB_LOG_LEVEL_DEBUG: syslog_level = LOG_DEBUG; break; |
| } |
| syslog(syslog_level, "%s", str); |
| #else /* All of gcc, Clang, Xcode seem to use #warning */ |
| #warning System logging is not supported on this platform. Logging to stderr will be used instead. |
| fputs(str, stderr); |
| #endif |
| #else |
| /* Global log handler */ |
| if (log_handler != NULL) |
| log_handler(NULL, level, str); |
| else |
| fputs(str, stderr); |
| #endif /* USE_SYSTEM_LOGGING_FACILITY */ |
| UNUSED(level); |
| } |
| |
| void usbi_log_v(struct libusb_context *ctx, enum libusb_log_level level, |
| const char *function, const char *format, va_list args) |
| { |
| const char *prefix; |
| char buf[USBI_MAX_LOG_LEN]; |
| struct timespec now; |
| int global_debug, header_len, text_len; |
| static int has_debug_header_been_displayed = 0; |
| |
| #ifdef ENABLE_DEBUG_LOGGING |
| global_debug = 1; |
| UNUSED(ctx); |
| #else |
| enum libusb_log_level ctx_level = LIBUSB_LOG_LEVEL_NONE; |
| |
| ctx = usbi_get_context(ctx); |
| if (ctx) |
| ctx_level = ctx->debug; |
| else |
| ctx_level = get_env_debug_level(); |
| |
| if (ctx_level == LIBUSB_LOG_LEVEL_NONE) |
| return; |
| if (level == LIBUSB_LOG_LEVEL_WARNING && ctx_level < LIBUSB_LOG_LEVEL_WARNING) |
| return; |
| if (level == LIBUSB_LOG_LEVEL_INFO && ctx_level < LIBUSB_LOG_LEVEL_INFO) |
| return; |
| if (level == LIBUSB_LOG_LEVEL_DEBUG && ctx_level < LIBUSB_LOG_LEVEL_DEBUG) |
| return; |
| |
| global_debug = (ctx_level == LIBUSB_LOG_LEVEL_DEBUG); |
| #endif |
| |
| usbi_clock_gettime(USBI_CLOCK_REALTIME, &now); |
| if ((global_debug) && (!has_debug_header_been_displayed)) { |
| has_debug_header_been_displayed = 1; |
| usbi_log_str(LIBUSB_LOG_LEVEL_DEBUG, "[timestamp] [threadID] facility level [function call] <message>" USBI_LOG_LINE_END); |
| usbi_log_str(LIBUSB_LOG_LEVEL_DEBUG, "--------------------------------------------------------------------------------" USBI_LOG_LINE_END); |
| } |
| if (now.tv_nsec < timestamp_origin.tv_nsec) { |
| now.tv_sec--; |
| now.tv_nsec += 1000000000L; |
| } |
| now.tv_sec -= timestamp_origin.tv_sec; |
| now.tv_nsec -= timestamp_origin.tv_nsec; |
| |
| switch (level) { |
| case LIBUSB_LOG_LEVEL_NONE: |
| return; |
| case LIBUSB_LOG_LEVEL_ERROR: |
| prefix = "error"; |
| break; |
| case LIBUSB_LOG_LEVEL_WARNING: |
| prefix = "warning"; |
| break; |
| case LIBUSB_LOG_LEVEL_INFO: |
| prefix = "info"; |
| break; |
| case LIBUSB_LOG_LEVEL_DEBUG: |
| prefix = "debug"; |
| break; |
| default: |
| prefix = "unknown"; |
| break; |
| } |
| |
| if (global_debug) { |
| header_len = snprintf(buf, sizeof(buf), |
| "[%2ld.%06ld] [%08x] libusb: %s [%s] ", |
| (long)now.tv_sec, (long)(now.tv_nsec / 1000L), usbi_get_tid(), prefix, function); |
| } else { |
| header_len = snprintf(buf, sizeof(buf), |
| "libusb: %s [%s] ", prefix, function); |
| } |
| |
| if (header_len < 0 || header_len >= (int)sizeof(buf)) { |
| /* Somehow snprintf failed to write to the buffer, |
| * remove the header so something useful is output. */ |
| header_len = 0; |
| } |
| /* Make sure buffer is NUL terminated */ |
| buf[header_len] = '\0'; |
| text_len = vsnprintf(buf + header_len, sizeof(buf) - (size_t)header_len, |
| format, args); |
| if (text_len < 0 || text_len + header_len >= (int)sizeof(buf)) { |
| /* Truncated log output. On some platforms a -1 return value means |
| * that the output was truncated. */ |
| text_len = (int)sizeof(buf) - header_len; |
| } |
| if (header_len + text_len + (int)sizeof(USBI_LOG_LINE_END) >= (int)sizeof(buf)) { |
| /* Need to truncate the text slightly to fit on the terminator. */ |
| text_len -= (header_len + text_len + (int)sizeof(USBI_LOG_LINE_END)) - (int)sizeof(buf); |
| } |
| strcpy(buf + header_len + text_len, USBI_LOG_LINE_END); |
| |
| usbi_log_str(level, buf); |
| |
| /* Per context log handler */ |
| #ifndef ENABLE_DEBUG_LOGGING |
| if (ctx && ctx->log_handler) |
| ctx->log_handler(ctx, level, buf); |
| #endif |
| } |
| |
| void usbi_log(struct libusb_context *ctx, enum libusb_log_level level, |
| const char *function, const char *format, ...) |
| { |
| va_list args; |
| |
| va_start (args, format); |
| usbi_log_v(ctx, level, function, format, args); |
| va_end (args); |
| } |
| |
| #endif /* ENABLE_LOGGING */ |
| |
| /** \ingroup libusb_misc |
| * Returns a constant NULL-terminated string with the ASCII name of a libusb |
| * error or transfer status code. The caller must not free() the returned |
| * string. |
| * |
| * \param error_code The \ref libusb_error or libusb_transfer_status code to |
| * return the name of. |
| * \returns The error name, or the string **UNKNOWN** if the value of |
| * error_code is not a known error / status code. |
| */ |
| DEFAULT_VISIBILITY const char * LIBUSB_CALL libusb_error_name(int error_code) |
| { |
| switch (error_code) { |
| case LIBUSB_ERROR_IO: |
| return "LIBUSB_ERROR_IO"; |
| case LIBUSB_ERROR_INVALID_PARAM: |
| return "LIBUSB_ERROR_INVALID_PARAM"; |
| case LIBUSB_ERROR_ACCESS: |
| return "LIBUSB_ERROR_ACCESS"; |
| case LIBUSB_ERROR_NO_DEVICE: |
| return "LIBUSB_ERROR_NO_DEVICE"; |
| case LIBUSB_ERROR_NOT_FOUND: |
| return "LIBUSB_ERROR_NOT_FOUND"; |
| case LIBUSB_ERROR_BUSY: |
| return "LIBUSB_ERROR_BUSY"; |
| case LIBUSB_ERROR_TIMEOUT: |
| return "LIBUSB_ERROR_TIMEOUT"; |
| case LIBUSB_ERROR_OVERFLOW: |
| return "LIBUSB_ERROR_OVERFLOW"; |
| case LIBUSB_ERROR_PIPE: |
| return "LIBUSB_ERROR_PIPE"; |
| case LIBUSB_ERROR_INTERRUPTED: |
| return "LIBUSB_ERROR_INTERRUPTED"; |
| case LIBUSB_ERROR_NO_MEM: |
| return "LIBUSB_ERROR_NO_MEM"; |
| case LIBUSB_ERROR_NOT_SUPPORTED: |
| return "LIBUSB_ERROR_NOT_SUPPORTED"; |
| case LIBUSB_ERROR_OTHER: |
| return "LIBUSB_ERROR_OTHER"; |
| |
| case LIBUSB_TRANSFER_ERROR: |
| return "LIBUSB_TRANSFER_ERROR"; |
| case LIBUSB_TRANSFER_TIMED_OUT: |
| return "LIBUSB_TRANSFER_TIMED_OUT"; |
| case LIBUSB_TRANSFER_CANCELLED: |
| return "LIBUSB_TRANSFER_CANCELLED"; |
| case LIBUSB_TRANSFER_STALL: |
| return "LIBUSB_TRANSFER_STALL"; |
| case LIBUSB_TRANSFER_NO_DEVICE: |
| return "LIBUSB_TRANSFER_NO_DEVICE"; |
| case LIBUSB_TRANSFER_OVERFLOW: |
| return "LIBUSB_TRANSFER_OVERFLOW"; |
| |
| case 0: |
| return "LIBUSB_SUCCESS / LIBUSB_TRANSFER_COMPLETED"; |
| default: |
| return "**UNKNOWN**"; |
| } |
| } |
| |
| /** \ingroup libusb_misc |
| * Returns a pointer to const struct libusb_version with the version |
| * (major, minor, micro, nano and rc) of the running library. |
| */ |
| DEFAULT_VISIBILITY |
| const struct libusb_version * LIBUSB_CALL libusb_get_version(void) |
| { |
| return &libusb_version_internal; |
| } |