blob: d2dfa20a9addc9415c2f8d4f0e013b67f93e8071 [file] [log] [blame]
/*
* Public libusb header file
* Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com>
* Copyright © 2007-2008 Daniel Drake <dsd@gentoo.org>
* Copyright © 2012 Pete Batard <pete@akeo.ie>
* Copyright © 2012-2018 Nathan Hjelm <hjelmn@cs.unm.edu>
* Copyright © 2014-2020 Chris Dickens <christopher.a.dickens@gmail.com>
* For more information, please visit: http://libusb.info
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef LIBUSB_H
#define LIBUSB_H
#if defined(_MSC_VER)
/* on MS environments, the inline keyword is available in C++ only */
#if !defined(__cplusplus)
#define inline __inline
#endif
/* ssize_t is also not available */
#include <basetsd.h>
typedef SSIZE_T ssize_t;
#endif /* _MSC_VER */
#include <limits.h>
#include <stdint.h>
#include <sys/types.h>
#if !defined(_MSC_VER)
#include <sys/time.h>
#endif
#include <time.h>
#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
#define ZERO_SIZED_ARRAY /* [] - valid C99 code */
#else
#define ZERO_SIZED_ARRAY 0 /* [0] - non-standard, but usually working code */
#endif /* __STDC_VERSION__ */
/* 'interface' might be defined as a macro on Windows, so we need to
* undefine it so as not to break the current libusb API, because
* libusb_config_descriptor has an 'interface' member
* As this can be problematic if you include windows.h after libusb.h
* in your sources, we force windows.h to be included first. */
#if defined(_WIN32) || defined(__CYGWIN__)
#include <windows.h>
#if defined(interface)
#undef interface
#endif
#if !defined(__CYGWIN__)
#include <winsock.h>
#endif
#endif /* _WIN32 || __CYGWIN__ */
#if defined(__GNUC__) && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5))
#define LIBUSB_DEPRECATED_FOR(f) __attribute__ ((deprecated ("Use " #f " instead")))
#elif defined(__GNUC__) && (__GNUC__ >= 3)
#define LIBUSB_DEPRECATED_FOR(f) __attribute__ ((deprecated))
#else
#define LIBUSB_DEPRECATED_FOR(f)
#endif /* __GNUC__ */
#if defined(__GNUC__)
#define LIBUSB_PACKED __attribute__ ((packed))
#else
#define LIBUSB_PACKED
#endif /* __GNUC__ */
/** \def LIBUSB_CALL
* \ingroup libusb_misc
* libusb's Windows calling convention.
*
* Under Windows, the selection of available compilers and configurations
* means that, unlike other platforms, there is not <em>one true calling
* convention</em> (calling convention: the manner in which parameters are
* passed to functions in the generated assembly code).
*
* Matching the Windows API itself, libusb uses the WINAPI convention (which
* translates to the <tt>stdcall</tt> convention) and guarantees that the
* library is compiled in this way. The public header file also includes
* appropriate annotations so that your own software will use the right
* convention, even if another convention is being used by default within
* your codebase.
*
* The one consideration that you must apply in your software is to mark
* all functions which you use as libusb callbacks with this LIBUSB_CALL
* annotation, so that they too get compiled for the correct calling
* convention.
*
* On non-Windows operating systems, this macro is defined as nothing. This
* means that you can apply it to your code without worrying about
* cross-platform compatibility.
*/
/* LIBUSB_CALL must be defined on both definition and declaration of libusb
* functions. You'd think that declaration would be enough, but cygwin will
* complain about conflicting types unless both are marked this way.
* The placement of this macro is important too; it must appear after the
* return type, before the function name. See internal documentation for
* API_EXPORTED.
*/
#if defined(_WIN32) || defined(__CYGWIN__)
#define LIBUSB_CALL WINAPI
#else
#define LIBUSB_CALL
#endif /* _WIN32 || __CYGWIN__ */
/** \def LIBUSB_API_VERSION
* \ingroup libusb_misc
* libusb's API version.
*
* Since version 1.0.13, to help with feature detection, libusb defines
* a LIBUSB_API_VERSION macro that gets increased every time there is a
* significant change to the API, such as the introduction of a new call,
* the definition of a new macro/enum member, or any other element that
* libusb applications may want to detect at compilation time.
*
* The macro is typically used in an application as follows:
* \code
* #if defined(LIBUSB_API_VERSION) && (LIBUSB_API_VERSION >= 0x01001234)
* // Use one of the newer features from the libusb API
* #endif
* \endcode
*
* Internally, LIBUSB_API_VERSION is defined as follows:
* (libusb major << 24) | (libusb minor << 16) | (16 bit incremental)
*/
#define LIBUSB_API_VERSION 0x01000108
/* The following is kept for compatibility, but will be deprecated in the future */
#define LIBUSBX_API_VERSION LIBUSB_API_VERSION
#if defined(__cplusplus)
extern "C" {
#endif
/**
* \ingroup libusb_misc
* Convert a 16-bit value from host-endian to little-endian format. On
* little endian systems, this function does nothing. On big endian systems,
* the bytes are swapped.
* \param x the host-endian value to convert
* \returns the value in little-endian byte order
*/
static inline uint16_t libusb_cpu_to_le16(const uint16_t x)
{
union {
uint8_t b8[2];
uint16_t b16;
} _tmp;
_tmp.b8[1] = (uint8_t) (x >> 8);
_tmp.b8[0] = (uint8_t) (x & 0xff);
return _tmp.b16;
}
/** \def libusb_le16_to_cpu
* \ingroup libusb_misc
* Convert a 16-bit value from little-endian to host-endian format. On
* little endian systems, this function does nothing. On big endian systems,
* the bytes are swapped.
* \param x the little-endian value to convert
* \returns the value in host-endian byte order
*/
#define libusb_le16_to_cpu libusb_cpu_to_le16
/* standard USB stuff */
/** \ingroup libusb_desc
* Device and/or Interface Class codes */
enum libusb_class_code {
/** In the context of a \ref libusb_device_descriptor "device descriptor",
* this bDeviceClass value indicates that each interface specifies its
* own class information and all interfaces operate independently.
*/
LIBUSB_CLASS_PER_INTERFACE = 0x00,
/** Audio class */
LIBUSB_CLASS_AUDIO = 0x01,
/** Communications class */
LIBUSB_CLASS_COMM = 0x02,
/** Human Interface Device class */
LIBUSB_CLASS_HID = 0x03,
/** Physical */
LIBUSB_CLASS_PHYSICAL = 0x05,
/** Image class */
LIBUSB_CLASS_IMAGE = 0x06,
LIBUSB_CLASS_PTP = 0x06, /* legacy name from libusb-0.1 usb.h */
/** Printer class */
LIBUSB_CLASS_PRINTER = 0x07,
/** Mass storage class */
LIBUSB_CLASS_MASS_STORAGE = 0x08,
/** Hub class */
LIBUSB_CLASS_HUB = 0x09,
/** Data class */
LIBUSB_CLASS_DATA = 0x0a,
/** Smart Card */
LIBUSB_CLASS_SMART_CARD = 0x0b,
/** Content Security */
LIBUSB_CLASS_CONTENT_SECURITY = 0x0d,
/** Video */
LIBUSB_CLASS_VIDEO = 0x0e,
/** Personal Healthcare */
LIBUSB_CLASS_PERSONAL_HEALTHCARE = 0x0f,
/** Diagnostic Device */
LIBUSB_CLASS_DIAGNOSTIC_DEVICE = 0xdc,
/** Wireless class */
LIBUSB_CLASS_WIRELESS = 0xe0,
/** Miscellaneous class */
LIBUSB_CLASS_MISCELLANEOUS = 0xef,
/** Application class */
LIBUSB_CLASS_APPLICATION = 0xfe,
/** Class is vendor-specific */
LIBUSB_CLASS_VENDOR_SPEC = 0xff
};
/** \ingroup libusb_desc
* Descriptor types as defined by the USB specification. */
enum libusb_descriptor_type {
/** Device descriptor. See libusb_device_descriptor. */
LIBUSB_DT_DEVICE = 0x01,
/** Configuration descriptor. See libusb_config_descriptor. */
LIBUSB_DT_CONFIG = 0x02,
/** String descriptor */
LIBUSB_DT_STRING = 0x03,
/** Interface descriptor. See libusb_interface_descriptor. */
LIBUSB_DT_INTERFACE = 0x04,
/** Endpoint descriptor. See libusb_endpoint_descriptor. */
LIBUSB_DT_ENDPOINT = 0x05,
/** BOS descriptor */
LIBUSB_DT_BOS = 0x0f,
/** Device Capability descriptor */
LIBUSB_DT_DEVICE_CAPABILITY = 0x10,
/** HID descriptor */
LIBUSB_DT_HID = 0x21,
/** HID report descriptor */
LIBUSB_DT_REPORT = 0x22,
/** Physical descriptor */
LIBUSB_DT_PHYSICAL = 0x23,
/** Hub descriptor */
LIBUSB_DT_HUB = 0x29,
/** SuperSpeed Hub descriptor */
LIBUSB_DT_SUPERSPEED_HUB = 0x2a,
/** SuperSpeed Endpoint Companion descriptor */
LIBUSB_DT_SS_ENDPOINT_COMPANION = 0x30
};
/* Descriptor sizes per descriptor type */
#define LIBUSB_DT_DEVICE_SIZE 18
#define LIBUSB_DT_CONFIG_SIZE 9
#define LIBUSB_DT_INTERFACE_SIZE 9
#define LIBUSB_DT_ENDPOINT_SIZE 7
#define LIBUSB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
#define LIBUSB_DT_HUB_NONVAR_SIZE 7
#define LIBUSB_DT_SS_ENDPOINT_COMPANION_SIZE 6
#define LIBUSB_DT_BOS_SIZE 5
#define LIBUSB_DT_DEVICE_CAPABILITY_SIZE 3
/* BOS descriptor sizes */
#define LIBUSB_BT_USB_2_0_EXTENSION_SIZE 7
#define LIBUSB_BT_SS_USB_DEVICE_CAPABILITY_SIZE 10
#define LIBUSB_BT_CONTAINER_ID_SIZE 20
/* We unwrap the BOS => define its max size */
#define LIBUSB_DT_BOS_MAX_SIZE \
(LIBUSB_DT_BOS_SIZE + \
LIBUSB_BT_USB_2_0_EXTENSION_SIZE + \
LIBUSB_BT_SS_USB_DEVICE_CAPABILITY_SIZE + \
LIBUSB_BT_CONTAINER_ID_SIZE)
#define LIBUSB_ENDPOINT_ADDRESS_MASK 0x0f /* in bEndpointAddress */
#define LIBUSB_ENDPOINT_DIR_MASK 0x80
/** \ingroup libusb_desc
* Endpoint direction. Values for bit 7 of the
* \ref libusb_endpoint_descriptor::bEndpointAddress "endpoint address" scheme.
*/
enum libusb_endpoint_direction {
/** Out: host-to-device */
LIBUSB_ENDPOINT_OUT = 0x00,
/** In: device-to-host */
LIBUSB_ENDPOINT_IN = 0x80
};
#define LIBUSB_TRANSFER_TYPE_MASK 0x03 /* in bmAttributes */
/** \ingroup libusb_desc
* Endpoint transfer type. Values for bits 0:1 of the
* \ref libusb_endpoint_descriptor::bmAttributes "endpoint attributes" field.
*/
enum libusb_endpoint_transfer_type {
/** Control endpoint */
LIBUSB_ENDPOINT_TRANSFER_TYPE_CONTROL = 0x0,
/** Isochronous endpoint */
LIBUSB_ENDPOINT_TRANSFER_TYPE_ISOCHRONOUS = 0x1,
/** Bulk endpoint */
LIBUSB_ENDPOINT_TRANSFER_TYPE_BULK = 0x2,
/** Interrupt endpoint */
LIBUSB_ENDPOINT_TRANSFER_TYPE_INTERRUPT = 0x3
};
/** \ingroup libusb_misc
* Standard requests, as defined in table 9-5 of the USB 3.0 specifications */
enum libusb_standard_request {
/** Request status of the specific recipient */
LIBUSB_REQUEST_GET_STATUS = 0x00,
/** Clear or disable a specific feature */
LIBUSB_REQUEST_CLEAR_FEATURE = 0x01,
/* 0x02 is reserved */
/** Set or enable a specific feature */
LIBUSB_REQUEST_SET_FEATURE = 0x03,
/* 0x04 is reserved */
/** Set device address for all future accesses */
LIBUSB_REQUEST_SET_ADDRESS = 0x05,
/** Get the specified descriptor */
LIBUSB_REQUEST_GET_DESCRIPTOR = 0x06,
/** Used to update existing descriptors or add new descriptors */
LIBUSB_REQUEST_SET_DESCRIPTOR = 0x07,
/** Get the current device configuration value */
LIBUSB_REQUEST_GET_CONFIGURATION = 0x08,
/** Set device configuration */
LIBUSB_REQUEST_SET_CONFIGURATION = 0x09,
/** Return the selected alternate setting for the specified interface */
LIBUSB_REQUEST_GET_INTERFACE = 0x0a,
/** Select an alternate interface for the specified interface */
LIBUSB_REQUEST_SET_INTERFACE = 0x0b,
/** Set then report an endpoint's synchronization frame */
LIBUSB_REQUEST_SYNCH_FRAME = 0x0c,
/** Sets both the U1 and U2 Exit Latency */
LIBUSB_REQUEST_SET_SEL = 0x30,
/** Delay from the time a host transmits a packet to the time it is
* received by the device. */
LIBUSB_SET_ISOCH_DELAY = 0x31
};
/** \ingroup libusb_misc
* Request type bits of the
* \ref libusb_control_setup::bmRequestType "bmRequestType" field in control
* transfers. */
enum libusb_request_type {
/** Standard */
LIBUSB_REQUEST_TYPE_STANDARD = (0x00 << 5),
/** Class */
LIBUSB_REQUEST_TYPE_CLASS = (0x01 << 5),
/** Vendor */
LIBUSB_REQUEST_TYPE_VENDOR = (0x02 << 5),
/** Reserved */
LIBUSB_REQUEST_TYPE_RESERVED = (0x03 << 5)
};
/** \ingroup libusb_misc
* Recipient bits of the
* \ref libusb_control_setup::bmRequestType "bmRequestType" field in control
* transfers. Values 4 through 31 are reserved. */
enum libusb_request_recipient {
/** Device */
LIBUSB_RECIPIENT_DEVICE = 0x00,
/** Interface */
LIBUSB_RECIPIENT_INTERFACE = 0x01,
/** Endpoint */
LIBUSB_RECIPIENT_ENDPOINT = 0x02,
/** Other */
LIBUSB_RECIPIENT_OTHER = 0x03
};
#define LIBUSB_ISO_SYNC_TYPE_MASK 0x0c
/** \ingroup libusb_desc
* Synchronization type for isochronous endpoints. Values for bits 2:3 of the
* \ref libusb_endpoint_descriptor::bmAttributes "bmAttributes" field in
* libusb_endpoint_descriptor.
*/
enum libusb_iso_sync_type {
/** No synchronization */
LIBUSB_ISO_SYNC_TYPE_NONE = 0x0,
/** Asynchronous */
LIBUSB_ISO_SYNC_TYPE_ASYNC = 0x1,
/** Adaptive */
LIBUSB_ISO_SYNC_TYPE_ADAPTIVE = 0x2,
/** Synchronous */
LIBUSB_ISO_SYNC_TYPE_SYNC = 0x3
};
#define LIBUSB_ISO_USAGE_TYPE_MASK 0x30
/** \ingroup libusb_desc
* Usage type for isochronous endpoints. Values for bits 4:5 of the
* \ref libusb_endpoint_descriptor::bmAttributes "bmAttributes" field in
* libusb_endpoint_descriptor.
*/
enum libusb_iso_usage_type {
/** Data endpoint */
LIBUSB_ISO_USAGE_TYPE_DATA = 0x0,
/** Feedback endpoint */
LIBUSB_ISO_USAGE_TYPE_FEEDBACK = 0x1,
/** Implicit feedback Data endpoint */
LIBUSB_ISO_USAGE_TYPE_IMPLICIT = 0x2
};
/** \ingroup libusb_desc
* Supported speeds (wSpeedSupported) bitfield. Indicates what
* speeds the device supports.
*/
enum libusb_supported_speed {
/** Low speed operation supported (1.5MBit/s). */
LIBUSB_LOW_SPEED_OPERATION = (1 << 0),
/** Full speed operation supported (12MBit/s). */
LIBUSB_FULL_SPEED_OPERATION = (1 << 1),
/** High speed operation supported (480MBit/s). */
LIBUSB_HIGH_SPEED_OPERATION = (1 << 2),
/** Superspeed operation supported (5000MBit/s). */
LIBUSB_SUPER_SPEED_OPERATION = (1 << 3)
};
/** \ingroup libusb_desc
* Masks for the bits of the
* \ref libusb_usb_2_0_extension_descriptor::bmAttributes "bmAttributes" field
* of the USB 2.0 Extension descriptor.
*/
enum libusb_usb_2_0_extension_attributes {
/** Supports Link Power Management (LPM) */
LIBUSB_BM_LPM_SUPPORT = (1 << 1)
};
/** \ingroup libusb_desc
* Masks for the bits of the
* \ref libusb_ss_usb_device_capability_descriptor::bmAttributes "bmAttributes" field
* field of the SuperSpeed USB Device Capability descriptor.
*/
enum libusb_ss_usb_device_capability_attributes {
/** Supports Latency Tolerance Messages (LTM) */
LIBUSB_BM_LTM_SUPPORT = (1 << 1)
};
/** \ingroup libusb_desc
* USB capability types
*/
enum libusb_bos_type {
/** Wireless USB device capability */
LIBUSB_BT_WIRELESS_USB_DEVICE_CAPABILITY = 0x01,
/** USB 2.0 extensions */
LIBUSB_BT_USB_2_0_EXTENSION = 0x02,
/** SuperSpeed USB device capability */
LIBUSB_BT_SS_USB_DEVICE_CAPABILITY = 0x03,
/** Container ID type */
LIBUSB_BT_CONTAINER_ID = 0x04
};
/** \ingroup libusb_desc
* A structure representing the standard USB device descriptor. This
* descriptor is documented in section 9.6.1 of the USB 3.0 specification.
* All multiple-byte fields are represented in host-endian format.
*/
struct libusb_device_descriptor {
/** Size of this descriptor (in bytes) */
uint8_t bLength;
/** Descriptor type. Will have value
* \ref libusb_descriptor_type::LIBUSB_DT_DEVICE LIBUSB_DT_DEVICE in this
* context. */
uint8_t bDescriptorType;
/** USB specification release number in binary-coded decimal. A value of
* 0x0200 indicates USB 2.0, 0x0110 indicates USB 1.1, etc. */
uint16_t bcdUSB;
/** USB-IF class code for the device. See \ref libusb_class_code. */
uint8_t bDeviceClass;
/** USB-IF subclass code for the device, qualified by the bDeviceClass
* value */
uint8_t bDeviceSubClass;
/** USB-IF protocol code for the device, qualified by the bDeviceClass and
* bDeviceSubClass values */
uint8_t bDeviceProtocol;
/** Maximum packet size for endpoint 0 */
uint8_t bMaxPacketSize0;
/** USB-IF vendor ID */
uint16_t idVendor;
/** USB-IF product ID */
uint16_t idProduct;
/** Device release number in binary-coded decimal */
uint16_t bcdDevice;
/** Index of string descriptor describing manufacturer */
uint8_t iManufacturer;
/** Index of string descriptor describing product */
uint8_t iProduct;
/** Index of string descriptor containing device serial number */
uint8_t iSerialNumber;
/** Number of possible configurations */
uint8_t bNumConfigurations;
};
/** \ingroup libusb_desc
* A structure representing the standard USB endpoint descriptor. This
* descriptor is documented in section 9.6.6 of the USB 3.0 specification.
* All multiple-byte fields are represented in host-endian format.
*/
struct libusb_endpoint_descriptor {
/** Size of this descriptor (in bytes) */
uint8_t bLength;
/** Descriptor type. Will have value
* \ref libusb_descriptor_type::LIBUSB_DT_ENDPOINT LIBUSB_DT_ENDPOINT in
* this context. */
uint8_t bDescriptorType;
/** The address of the endpoint described by this descriptor. Bits 0:3 are
* the endpoint number. Bits 4:6 are reserved. Bit 7 indicates direction,
* see \ref libusb_endpoint_direction. */
uint8_t bEndpointAddress;
/** Attributes which apply to the endpoint when it is configured using
* the bConfigurationValue. Bits 0:1 determine the transfer type and
* correspond to \ref libusb_endpoint_transfer_type. Bits 2:3 are only used
* for isochronous endpoints and correspond to \ref libusb_iso_sync_type.
* Bits 4:5 are also only used for isochronous endpoints and correspond to
* \ref libusb_iso_usage_type. Bits 6:7 are reserved. */
uint8_t bmAttributes;
/** Maximum packet size this endpoint is capable of sending/receiving. */
uint16_t wMaxPacketSize;
/** Interval for polling endpoint for data transfers. */
uint8_t bInterval;
/** For audio devices only: the rate at which synchronization feedback
* is provided. */
uint8_t bRefresh;
/** For audio devices only: the address if the synch endpoint */
uint8_t bSynchAddress;
/** Extra descriptors. If libusb encounters unknown endpoint descriptors,
* it will store them here, should you wish to parse them. */
const unsigned char *extra;
/** Length of the extra descriptors, in bytes. Must be non-negative. */
int extra_length;
};
/** \ingroup libusb_desc
* A structure representing the standard USB interface descriptor. This
* descriptor is documented in section 9.6.5 of the USB 3.0 specification.
* All multiple-byte fields are represented in host-endian format.
*/
struct libusb_interface_descriptor {
/** Size of this descriptor (in bytes) */
uint8_t bLength;
/** Descriptor type. Will have value
* \ref libusb_descriptor_type::LIBUSB_DT_INTERFACE LIBUSB_DT_INTERFACE
* in this context. */
uint8_t bDescriptorType;
/** Number of this interface */
uint8_t bInterfaceNumber;
/** Value used to select this alternate setting for this interface */
uint8_t bAlternateSetting;
/** Number of endpoints used by this interface (excluding the control
* endpoint). */
uint8_t bNumEndpoints;
/** USB-IF class code for this interface. See \ref libusb_class_code. */
uint8_t bInterfaceClass;
/** USB-IF subclass code for this interface, qualified by the
* bInterfaceClass value */
uint8_t bInterfaceSubClass;
/** USB-IF protocol code for this interface, qualified by the
* bInterfaceClass and bInterfaceSubClass values */
uint8_t bInterfaceProtocol;
/** Index of string descriptor describing this interface */
uint8_t iInterface;
/** Array of endpoint descriptors. This length of this array is determined
* by the bNumEndpoints field. */
const struct libusb_endpoint_descriptor *endpoint;
/** Extra descriptors. If libusb encounters unknown interface descriptors,
* it will store them here, should you wish to parse them. */
const unsigned char *extra;
/** Length of the extra descriptors, in bytes. Must be non-negative. */
int extra_length;
};
/** \ingroup libusb_desc
* A collection of alternate settings for a particular USB interface.
*/
struct libusb_interface {
/** Array of interface descriptors. The length of this array is determined
* by the num_altsetting field. */
const struct libusb_interface_descriptor *altsetting;
/** The number of alternate settings that belong to this interface.
* Must be non-negative. */
int num_altsetting;
};
/** \ingroup libusb_desc
* A structure representing the standard USB configuration descriptor. This
* descriptor is documented in section 9.6.3 of the USB 3.0 specification.
* All multiple-byte fields are represented in host-endian format.
*/
struct libusb_config_descriptor {
/** Size of this descriptor (in bytes) */
uint8_t bLength;
/** Descriptor type. Will have value
* \ref libusb_descriptor_type::LIBUSB_DT_CONFIG LIBUSB_DT_CONFIG
* in this context. */
uint8_t bDescriptorType;
/** Total length of data returned for this configuration */
uint16_t wTotalLength;
/** Number of interfaces supported by this configuration */
uint8_t bNumInterfaces;
/** Identifier value for this configuration */
uint8_t bConfigurationValue;
/** Index of string descriptor describing this configuration */
uint8_t iConfiguration;
/** Configuration characteristics */
uint8_t bmAttributes;
/** Maximum power consumption of the USB device from this bus in this
* configuration when the device is fully operation. Expressed in units
* of 2 mA when the device is operating in high-speed mode and in units
* of 8 mA when the device is operating in super-speed mode. */
uint8_t MaxPower;
/** Array of interfaces supported by this configuration. The length of
* this array is determined by the bNumInterfaces field. */
const struct libusb_interface *interface;
/** Extra descriptors. If libusb encounters unknown configuration
* descriptors, it will store them here, should you wish to parse them. */
const unsigned char *extra;
/** Length of the extra descriptors, in bytes. Must be non-negative. */
int extra_length;
};
/** \ingroup libusb_desc
* A structure representing the superspeed endpoint companion
* descriptor. This descriptor is documented in section 9.6.7 of
* the USB 3.0 specification. All multiple-byte fields are represented in
* host-endian format.
*/
struct libusb_ss_endpoint_companion_descriptor {
/** Size of this descriptor (in bytes) */
uint8_t bLength;
/** Descriptor type. Will have value
* \ref libusb_descriptor_type::LIBUSB_DT_SS_ENDPOINT_COMPANION in
* this context. */
uint8_t bDescriptorType;
/** The maximum number of packets the endpoint can send or
* receive as part of a burst. */
uint8_t bMaxBurst;
/** In bulk EP: bits 4:0 represents the maximum number of
* streams the EP supports. In isochronous EP: bits 1:0
* represents the Mult - a zero based value that determines
* the maximum number of packets within a service interval */
uint8_t bmAttributes;
/** The total number of bytes this EP will transfer every
* service interval. Valid only for periodic EPs. */
uint16_t wBytesPerInterval;
};
/** \ingroup libusb_desc
* A generic representation of a BOS Device Capability descriptor. It is
* advised to check bDevCapabilityType and call the matching
* libusb_get_*_descriptor function to get a structure fully matching the type.
*/
struct libusb_bos_dev_capability_descriptor {
/** Size of this descriptor (in bytes) */
uint8_t bLength;
/** Descriptor type. Will have value
* \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY
* LIBUSB_DT_DEVICE_CAPABILITY in this context. */
uint8_t bDescriptorType;
/** Device Capability type */
uint8_t bDevCapabilityType;
/** Device Capability data (bLength - 3 bytes) */
uint8_t dev_capability_data[ZERO_SIZED_ARRAY];
};
/** \ingroup libusb_desc
* A structure representing the Binary Device Object Store (BOS) descriptor.
* This descriptor is documented in section 9.6.2 of the USB 3.0 specification.
* All multiple-byte fields are represented in host-endian format.
*/
struct libusb_bos_descriptor {
/** Size of this descriptor (in bytes) */
uint8_t bLength;
/** Descriptor type. Will have value
* \ref libusb_descriptor_type::LIBUSB_DT_BOS LIBUSB_DT_BOS
* in this context. */
uint8_t bDescriptorType;
/** Length of this descriptor and all of its sub descriptors */
uint16_t wTotalLength;
/** The number of separate device capability descriptors in
* the BOS */
uint8_t bNumDeviceCaps;
/** bNumDeviceCap Device Capability Descriptors */
struct libusb_bos_dev_capability_descriptor *dev_capability[ZERO_SIZED_ARRAY];
};
/** \ingroup libusb_desc
* A structure representing the USB 2.0 Extension descriptor
* This descriptor is documented in section 9.6.2.1 of the USB 3.0 specification.
* All multiple-byte fields are represented in host-endian format.
*/
struct libusb_usb_2_0_extension_descriptor {
/** Size of this descriptor (in bytes) */
uint8_t bLength;
/** Descriptor type. Will have value
* \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY
* LIBUSB_DT_DEVICE_CAPABILITY in this context. */
uint8_t bDescriptorType;
/** Capability type. Will have value
* \ref libusb_capability_type::LIBUSB_BT_USB_2_0_EXTENSION
* LIBUSB_BT_USB_2_0_EXTENSION in this context. */
uint8_t bDevCapabilityType;
/** Bitmap encoding of supported device level features.
* A value of one in a bit location indicates a feature is
* supported; a value of zero indicates it is not supported.
* See \ref libusb_usb_2_0_extension_attributes. */
uint32_t bmAttributes;
};
/** \ingroup libusb_desc
* A structure representing the SuperSpeed USB Device Capability descriptor
* This descriptor is documented in section 9.6.2.2 of the USB 3.0 specification.
* All multiple-byte fields are represented in host-endian format.
*/
struct libusb_ss_usb_device_capability_descriptor {
/** Size of this descriptor (in bytes) */
uint8_t bLength;
/** Descriptor type. Will have value
* \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY
* LIBUSB_DT_DEVICE_CAPABILITY in this context. */
uint8_t bDescriptorType;
/** Capability type. Will have value
* \ref libusb_capability_type::LIBUSB_BT_SS_USB_DEVICE_CAPABILITY
* LIBUSB_BT_SS_USB_DEVICE_CAPABILITY in this context. */
uint8_t bDevCapabilityType;
/** Bitmap encoding of supported device level features.
* A value of one in a bit location indicates a feature is
* supported; a value of zero indicates it is not supported.
* See \ref libusb_ss_usb_device_capability_attributes. */
uint8_t bmAttributes;
/** Bitmap encoding of the speed supported by this device when
* operating in SuperSpeed mode. See \ref libusb_supported_speed. */
uint16_t wSpeedSupported;
/** The lowest speed at which all the functionality supported
* by the device is available to the user. For example if the
* device supports all its functionality when connected at
* full speed and above then it sets this value to 1. */
uint8_t bFunctionalitySupport;
/** U1 Device Exit Latency. */
uint8_t bU1DevExitLat;
/** U2 Device Exit Latency. */
uint16_t bU2DevExitLat;
};
/** \ingroup libusb_desc
* A structure representing the Container ID descriptor.
* This descriptor is documented in section 9.6.2.3 of the USB 3.0 specification.
* All multiple-byte fields, except UUIDs, are represented in host-endian format.
*/
struct libusb_container_id_descriptor {
/** Size of this descriptor (in bytes) */
uint8_t bLength;
/** Descriptor type. Will have value
* \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY
* LIBUSB_DT_DEVICE_CAPABILITY in this context. */
uint8_t bDescriptorType;
/** Capability type. Will have value
* \ref libusb_capability_type::LIBUSB_BT_CONTAINER_ID
* LIBUSB_BT_CONTAINER_ID in this context. */
uint8_t bDevCapabilityType;
/** Reserved field */
uint8_t bReserved;
/** 128 bit UUID */
uint8_t ContainerID[16];
};
/** \ingroup libusb_asyncio
* Setup packet for control transfers. */
#if defined(_MSC_VER) || defined(__WATCOMC__)
#pragma pack(push, 1)
#endif
struct libusb_control_setup {
/** Request type. Bits 0:4 determine recipient, see
* \ref libusb_request_recipient. Bits 5:6 determine type, see
* \ref libusb_request_type. Bit 7 determines data transfer direction, see
* \ref libusb_endpoint_direction.
*/
uint8_t bmRequestType;
/** Request. If the type bits of bmRequestType are equal to
* \ref libusb_request_type::LIBUSB_REQUEST_TYPE_STANDARD
* "LIBUSB_REQUEST_TYPE_STANDARD" then this field refers to
* \ref libusb_standard_request. For other cases, use of this field is
* application-specific. */
uint8_t bRequest;
/** Value. Varies according to request */
uint16_t wValue;
/** Index. Varies according to request, typically used to pass an index
* or offset */
uint16_t wIndex;
/** Number of bytes to transfer */
uint16_t wLength;
} LIBUSB_PACKED;
#if defined(_MSC_VER) || defined(__WATCOMC__)
#pragma pack(pop)
#endif
#define LIBUSB_CONTROL_SETUP_SIZE (sizeof(struct libusb_control_setup))
/* libusb */
struct libusb_context;
struct libusb_device;
struct libusb_device_handle;
/** \ingroup libusb_lib
* Structure providing the version of the libusb runtime
*/
struct libusb_version {
/** Library major version. */
const uint16_t major;
/** Library minor version. */
const uint16_t minor;
/** Library micro version. */
const uint16_t micro;
/** Library nano version. */
const uint16_t nano;
/** Library release candidate suffix string, e.g. "-rc4". */
const char *rc;
/** For ABI compatibility only. */
const char *describe;
};
/** \ingroup libusb_lib
* Structure representing a libusb session. The concept of individual libusb
* sessions allows for your program to use two libraries (or dynamically
* load two modules) which both independently use libusb. This will prevent
* interference between the individual libusb users - for example
* libusb_set_option() will not affect the other user of the library, and
* libusb_exit() will not destroy resources that the other user is still
* using.
*
* Sessions are created by libusb_init() and destroyed through libusb_exit().
* If your application is guaranteed to only ever include a single libusb
* user (i.e. you), you do not have to worry about contexts: pass NULL in
* every function call where a context is required. The default context
* will be used.
*
* For more information, see \ref libusb_contexts.
*/
typedef struct libusb_context libusb_context;
/** \ingroup libusb_dev
* Structure representing a USB device detected on the system. This is an
* opaque type for which you are only ever provided with a pointer, usually
* originating from libusb_get_device_list().
*
* Certain operations can be performed on a device, but in order to do any
* I/O you will have to first obtain a device handle using libusb_open().
*
* Devices are reference counted with libusb_ref_device() and
* libusb_unref_device(), and are freed when the reference count reaches 0.
* New devices presented by libusb_get_device_list() have a reference count of
* 1, and libusb_free_device_list() can optionally decrease the reference count
* on all devices in the list. libusb_open() adds another reference which is
* later destroyed by libusb_close().
*/
typedef struct libusb_device libusb_device;
/** \ingroup libusb_dev
* Structure representing a handle on a USB device. This is an opaque type for
* which you are only ever provided with a pointer, usually originating from
* libusb_open().
*
* A device handle is used to perform I/O and other operations. When finished
* with a device handle, you should call libusb_close().
*/
typedef struct libusb_device_handle libusb_device_handle;
/** \ingroup libusb_dev
* Speed codes. Indicates the speed at which the device is operating.
*/
enum libusb_speed {
/** The OS doesn't report or know the device speed. */
LIBUSB_SPEED_UNKNOWN = 0,
/** The device is operating at low speed (1.5MBit/s). */
LIBUSB_SPEED_LOW = 1,
/** The device is operating at full speed (12MBit/s). */
LIBUSB_SPEED_FULL = 2,
/** The device is operating at high speed (480MBit/s). */
LIBUSB_SPEED_HIGH = 3,
/** The device is operating at super speed (5000MBit/s). */
LIBUSB_SPEED_SUPER = 4,
/** The device is operating at super speed plus (10000MBit/s). */
LIBUSB_SPEED_SUPER_PLUS = 5
};
/** \ingroup libusb_misc
* Error codes. Most libusb functions return 0 on success or one of these
* codes on failure.
* You can call libusb_error_name() to retrieve a string representation of an
* error code or libusb_strerror() to get an end-user suitable description of
* an error code.
*/
enum libusb_error {
/** Success (no error) */
LIBUSB_SUCCESS = 0,
/** Input/output error */
LIBUSB_ERROR_IO = -1,
/** Invalid parameter */
LIBUSB_ERROR_INVALID_PARAM = -2,
/** Access denied (insufficient permissions) */
LIBUSB_ERROR_ACCESS = -3,
/** No such device (it may have been disconnected) */
LIBUSB_ERROR_NO_DEVICE = -4,
/** Entity not found */
LIBUSB_ERROR_NOT_FOUND = -5,
/** Resource busy */
LIBUSB_ERROR_BUSY = -6,
/** Operation timed out */
LIBUSB_ERROR_TIMEOUT = -7,
/** Overflow */
LIBUSB_ERROR_OVERFLOW = -8,
/** Pipe error */
LIBUSB_ERROR_PIPE = -9,
/** System call interrupted (perhaps due to signal) */
LIBUSB_ERROR_INTERRUPTED = -10,
/** Insufficient memory */
LIBUSB_ERROR_NO_MEM = -11,
/** Operation not supported or unimplemented on this platform */
LIBUSB_ERROR_NOT_SUPPORTED = -12,
/* NB: Remember to update LIBUSB_ERROR_COUNT below as well as the
message strings in strerror.c when adding new error codes here. */
/** Other error */
LIBUSB_ERROR_OTHER = -99
};
/* Total number of error codes in enum libusb_error */
#define LIBUSB_ERROR_COUNT 14
/** \ingroup libusb_asyncio
* Transfer type */
enum libusb_transfer_type {
/** Control transfer */
LIBUSB_TRANSFER_TYPE_CONTROL = 0U,
/** Isochronous transfer */
LIBUSB_TRANSFER_TYPE_ISOCHRONOUS = 1U,
/** Bulk transfer */
LIBUSB_TRANSFER_TYPE_BULK = 2U,
/** Interrupt transfer */
LIBUSB_TRANSFER_TYPE_INTERRUPT = 3U,
/** Bulk stream transfer */
LIBUSB_TRANSFER_TYPE_BULK_STREAM = 4U
};
/** \ingroup libusb_asyncio
* Transfer status codes */
enum libusb_transfer_status {
/** Transfer completed without error. Note that this does not indicate
* that the entire amount of requested data was transferred. */
LIBUSB_TRANSFER_COMPLETED,
/** Transfer failed */
LIBUSB_TRANSFER_ERROR,
/** Transfer timed out */
LIBUSB_TRANSFER_TIMED_OUT,
/** Transfer was cancelled */
LIBUSB_TRANSFER_CANCELLED,
/** For bulk/interrupt endpoints: halt condition detected (endpoint
* stalled). For control endpoints: control request not supported. */
LIBUSB_TRANSFER_STALL,
/** Device was disconnected */
LIBUSB_TRANSFER_NO_DEVICE,
/** Device sent more data than requested */
LIBUSB_TRANSFER_OVERFLOW
/* NB! Remember to update libusb_error_name()
when adding new status codes here. */
};
/** \ingroup libusb_asyncio
* libusb_transfer.flags values */
enum libusb_transfer_flags {
/** Report short frames as errors */
LIBUSB_TRANSFER_SHORT_NOT_OK = (1U << 0),
/** Automatically free() transfer buffer during libusb_free_transfer().
* Note that buffers allocated with libusb_dev_mem_alloc() should not
* be attempted freed in this way, since free() is not an appropriate
* way to release such memory. */
LIBUSB_TRANSFER_FREE_BUFFER = (1U << 1),
/** Automatically call libusb_free_transfer() after callback returns.
* If this flag is set, it is illegal to call libusb_free_transfer()
* from your transfer callback, as this will result in a double-free
* when this flag is acted upon. */
LIBUSB_TRANSFER_FREE_TRANSFER = (1U << 2),
/** Terminate transfers that are a multiple of the endpoint's
* wMaxPacketSize with an extra zero length packet. This is useful
* when a device protocol mandates that each logical request is
* terminated by an incomplete packet (i.e. the logical requests are
* not separated by other means).
*
* This flag only affects host-to-device transfers to bulk and interrupt
* endpoints. In other situations, it is ignored.
*
* This flag only affects transfers with a length that is a multiple of
* the endpoint's wMaxPacketSize. On transfers of other lengths, this
* flag has no effect. Therefore, if you are working with a device that
* needs a ZLP whenever the end of the logical request falls on a packet
* boundary, then it is sensible to set this flag on <em>every</em>
* transfer (you do not have to worry about only setting it on transfers
* that end on the boundary).
*
* This flag is currently only supported on Linux.
* On other systems, libusb_submit_transfer() will return
* LIBUSB_ERROR_NOT_SUPPORTED for every transfer where this flag is set.
*
* Available since libusb-1.0.9.
*/
LIBUSB_TRANSFER_ADD_ZERO_PACKET = (1U << 3)
};
/** \ingroup libusb_asyncio
* Isochronous packet descriptor. */
struct libusb_iso_packet_descriptor {
/** Length of data to request in this packet */
unsigned int length;
/** Amount of data that was actually transferred */
unsigned int actual_length;
/** Status code for this packet */
enum libusb_transfer_status status;
};
struct libusb_transfer;
/** \ingroup libusb_asyncio
* Asynchronous transfer callback function type. When submitting asynchronous
* transfers, you pass a pointer to a callback function of this type via the
* \ref libusb_transfer::callback "callback" member of the libusb_transfer
* structure. libusb will call this function later, when the transfer has
* completed or failed. See \ref libusb_asyncio for more information.
* \param transfer The libusb_transfer struct the callback function is being
* notified about.
*/
typedef void (LIBUSB_CALL *libusb_transfer_cb_fn)(struct libusb_transfer *transfer);
/** \ingroup libusb_asyncio
* The generic USB transfer structure. The user populates this structure and
* then submits it in order to request a transfer. After the transfer has
* completed, the library populates the transfer with the results and passes
* it back to the user.
*/
struct libusb_transfer {
/** Handle of the device that this transfer will be submitted to */
libusb_device_handle *dev_handle;
/** A bitwise OR combination of \ref libusb_transfer_flags. */
uint8_t flags;
/** Address of the endpoint where this transfer will be sent. */
unsigned char endpoint;
/** Type of the transfer from \ref libusb_transfer_type */
unsigned char type;
/** Timeout for this transfer in milliseconds. A value of 0 indicates no
* timeout. */
unsigned int timeout;
/** The status of the transfer. Read-only, and only for use within
* transfer callback function.
*
* If this is an isochronous transfer, this field may read COMPLETED even
* if there were errors in the frames. Use the
* \ref libusb_iso_packet_descriptor::status "status" field in each packet
* to determine if errors occurred. */
enum libusb_transfer_status status;
/** Length of the data buffer. Must be non-negative. */
int length;
/** Actual length of data that was transferred. Read-only, and only for
* use within transfer callback function. Not valid for isochronous
* endpoint transfers. */
int actual_length;
/** Callback function. This will be invoked when the transfer completes,
* fails, or is cancelled. */
libusb_transfer_cb_fn callback;
/** User context data. Useful for associating specific data to a transfer
* that can be accessed from within the callback function.
*
* This field may be set manually or is taken as the `user_data` parameter
* of the following functions:
* - libusb_fill_bulk_transfer()
* - libusb_fill_bulk_stream_transfer()
* - libusb_fill_control_transfer()
* - libusb_fill_interrupt_transfer()
* - libusb_fill_iso_transfer() */
void *user_data;
/** Data buffer */
unsigned char *buffer;
/** Number of isochronous packets. Only used for I/O with isochronous
* endpoints. Must be non-negative. */
int num_iso_packets;
/** Isochronous packet descriptors, for isochronous transfers only. */
struct libusb_iso_packet_descriptor iso_packet_desc[ZERO_SIZED_ARRAY];
};
/** \ingroup libusb_misc
* Capabilities supported by an instance of libusb on the current running
* platform. Test if the loaded library supports a given capability by calling
* \ref libusb_has_capability().
*/
enum libusb_capability {
/** The libusb_has_capability() API is available. */
LIBUSB_CAP_HAS_CAPABILITY = 0x0000U,
/** Hotplug support is available on this platform. */
LIBUSB_CAP_HAS_HOTPLUG = 0x0001U,
/** The library can access HID devices without requiring user intervention.
* Note that before being able to actually access an HID device, you may
* still have to call additional libusb functions such as
* \ref libusb_detach_kernel_driver(). */
LIBUSB_CAP_HAS_HID_ACCESS = 0x0100U,
/** The library supports detaching of the default USB driver, using
* \ref libusb_detach_kernel_driver(), if one is set by the OS kernel */
LIBUSB_CAP_SUPPORTS_DETACH_KERNEL_DRIVER = 0x0101U
};
/** \ingroup libusb_lib
* Log message levels.
*/
enum libusb_log_level {
/** (0) : No messages ever emitted by the library (default) */
LIBUSB_LOG_LEVEL_NONE = 0,
/** (1) : Error messages are emitted */
LIBUSB_LOG_LEVEL_ERROR = 1,
/** (2) : Warning and error messages are emitted */
LIBUSB_LOG_LEVEL_WARNING = 2,
/** (3) : Informational, warning and error messages are emitted */
LIBUSB_LOG_LEVEL_INFO = 3,
/** (4) : All messages are emitted */
LIBUSB_LOG_LEVEL_DEBUG = 4
};
/** \ingroup libusb_lib
* Log callback mode.
*
* Since version 1.0.23, \ref LIBUSB_API_VERSION >= 0x01000107
*
* \see libusb_set_log_cb()
*/
enum libusb_log_cb_mode {
/** Callback function handling all log messages. */
LIBUSB_LOG_CB_GLOBAL = (1 << 0),
/** Callback function handling context related log messages. */
LIBUSB_LOG_CB_CONTEXT = (1 << 1)
};
/** \ingroup libusb_lib
* Callback function for handling log messages.
* \param ctx the context which is related to the log message, or NULL if it
* is a global log message
* \param level the log level, see \ref libusb_log_level for a description
* \param str the log message
*
* Since version 1.0.23, \ref LIBUSB_API_VERSION >= 0x01000107
*
* \see libusb_set_log_cb()
*/
typedef void (LIBUSB_CALL *libusb_log_cb)(libusb_context *ctx,
enum libusb_log_level level, const char *str);
int LIBUSB_CALL libusb_init(libusb_context **ctx);
void LIBUSB_CALL libusb_exit(libusb_context *ctx);
LIBUSB_DEPRECATED_FOR(libusb_set_option)
void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
void LIBUSB_CALL libusb_set_log_cb(libusb_context *ctx, libusb_log_cb cb, int mode);
const struct libusb_version * LIBUSB_CALL libusb_get_version(void);
int LIBUSB_CALL libusb_has_capability(uint32_t capability);
const char * LIBUSB_CALL libusb_error_name(int errcode);
int LIBUSB_CALL libusb_setlocale(const char *locale);
const char * LIBUSB_CALL libusb_strerror(int errcode);
ssize_t LIBUSB_CALL libusb_get_device_list(libusb_context *ctx,
libusb_device ***list);
void LIBUSB_CALL libusb_free_device_list(libusb_device **list,
int unref_devices);
libusb_device * LIBUSB_CALL libusb_ref_device(libusb_device *dev);
void LIBUSB_CALL libusb_unref_device(libusb_device *dev);
int LIBUSB_CALL libusb_get_configuration(libusb_device_handle *dev,
int *config);
int LIBUSB_CALL libusb_get_device_descriptor(libusb_device *dev,
struct libusb_device_descriptor *desc);
int LIBUSB_CALL libusb_get_active_config_descriptor(libusb_device *dev,
struct libusb_config_descriptor **config);
int LIBUSB_CALL libusb_get_config_descriptor(libusb_device *dev,
uint8_t config_index, struct libusb_config_descriptor **config);
int LIBUSB_CALL libusb_get_config_descriptor_by_value(libusb_device *dev,
uint8_t bConfigurationValue, struct libusb_config_descriptor **config);
void LIBUSB_CALL libusb_free_config_descriptor(
struct libusb_config_descriptor *config);
int LIBUSB_CALL libusb_get_ss_endpoint_companion_descriptor(
libusb_context *ctx,
const struct libusb_endpoint_descriptor *endpoint,
struct libusb_ss_endpoint_companion_descriptor **ep_comp);
void LIBUSB_CALL libusb_free_ss_endpoint_companion_descriptor(
struct libusb_ss_endpoint_companion_descriptor *ep_comp);
int LIBUSB_CALL libusb_get_bos_descriptor(libusb_device_handle *dev_handle,
struct libusb_bos_descriptor **bos);
void LIBUSB_CALL libusb_free_bos_descriptor(struct libusb_bos_descriptor *bos);
int LIBUSB_CALL libusb_get_usb_2_0_extension_descriptor(
libusb_context *ctx,
struct libusb_bos_dev_capability_descriptor *dev_cap,
struct libusb_usb_2_0_extension_descriptor **usb_2_0_extension);
void LIBUSB_CALL libusb_free_usb_2_0_extension_descriptor(
struct libusb_usb_2_0_extension_descriptor *usb_2_0_extension);
int LIBUSB_CALL libusb_get_ss_usb_device_capability_descriptor(
libusb_context *ctx,
struct libusb_bos_dev_capability_descriptor *dev_cap,
struct libusb_ss_usb_device_capability_descriptor **ss_usb_device_cap);
void LIBUSB_CALL libusb_free_ss_usb_device_capability_descriptor(
struct libusb_ss_usb_device_capability_descriptor *ss_usb_device_cap);
int LIBUSB_CALL libusb_get_container_id_descriptor(libusb_context *ctx,
struct libusb_bos_dev_capability_descriptor *dev_cap,
struct libusb_container_id_descriptor **container_id);
void LIBUSB_CALL libusb_free_container_id_descriptor(
struct libusb_container_id_descriptor *container_id);
uint8_t LIBUSB_CALL libusb_get_bus_number(libusb_device *dev);
uint8_t LIBUSB_CALL libusb_get_port_number(libusb_device *dev);
int LIBUSB_CALL libusb_get_port_numbers(libusb_device *dev, uint8_t *port_numbers, int port_numbers_len);
LIBUSB_DEPRECATED_FOR(libusb_get_port_numbers)
int LIBUSB_CALL libusb_get_port_path(libusb_context *ctx, libusb_device *dev, uint8_t *path, uint8_t path_length);
libusb_device * LIBUSB_CALL libusb_get_parent(libusb_device *dev);
uint8_t LIBUSB_CALL libusb_get_device_address(libusb_device *dev);
int LIBUSB_CALL libusb_get_device_speed(libusb_device *dev);
int LIBUSB_CALL libusb_get_max_packet_size(libusb_device *dev,
unsigned char endpoint);
int LIBUSB_CALL libusb_get_max_iso_packet_size(libusb_device *dev,
unsigned char endpoint);
int LIBUSB_CALL libusb_wrap_sys_device(libusb_context *ctx, intptr_t sys_dev, libusb_device_handle **dev_handle);
int LIBUSB_CALL libusb_open(libusb_device *dev, libusb_device_handle **dev_handle);
void LIBUSB_CALL libusb_close(libusb_device_handle *dev_handle);
libusb_device * LIBUSB_CALL libusb_get_device(libusb_device_handle *dev_handle);
int LIBUSB_CALL libusb_set_configuration(libusb_device_handle *dev_handle,
int configuration);
int LIBUSB_CALL libusb_claim_interface(libusb_device_handle *dev_handle,
int interface_number);
int LIBUSB_CALL libusb_release_interface(libusb_device_handle *dev_handle,
int interface_number);
libusb_device_handle * LIBUSB_CALL libusb_open_device_with_vid_pid(
libusb_context *ctx, uint16_t vendor_id, uint16_t product_id);
int LIBUSB_CALL libusb_set_interface_alt_setting(libusb_device_handle *dev_handle,
int interface_number, int alternate_setting);
int LIBUSB_CALL libusb_clear_halt(libusb_device_handle *dev_handle,
unsigned char endpoint);
int LIBUSB_CALL libusb_reset_device(libusb_device_handle *dev_handle);
int LIBUSB_CALL libusb_alloc_streams(libusb_device_handle *dev_handle,
uint32_t num_streams, unsigned char *endpoints, int num_endpoints);
int LIBUSB_CALL libusb_free_streams(libusb_device_handle *dev_handle,
unsigned char *endpoints, int num_endpoints);
unsigned char * LIBUSB_CALL libusb_dev_mem_alloc(libusb_device_handle *dev_handle,
size_t length);
int LIBUSB_CALL libusb_dev_mem_free(libusb_device_handle *dev_handle,
unsigned char *buffer, size_t length);
int LIBUSB_CALL libusb_kernel_driver_active(libusb_device_handle *dev_handle,
int interface_number);
int LIBUSB_CALL libusb_detach_kernel_driver(libusb_device_handle *dev_handle,
int interface_number);
int LIBUSB_CALL libusb_attach_kernel_driver(libusb_device_handle *dev_handle,
int interface_number);
int LIBUSB_CALL libusb_set_auto_detach_kernel_driver(
libusb_device_handle *dev_handle, int enable);
/* async I/O */
/** \ingroup libusb_asyncio
* Get the data section of a control transfer. This convenience function is here
* to remind you that the data does not start until 8 bytes into the actual
* buffer, as the setup packet comes first.
*
* Calling this function only makes sense from a transfer callback function,
* or situations where you have already allocated a suitably sized buffer at
* transfer->buffer.
*
* \param transfer a transfer
* \returns pointer to the first byte of the data section
*/
static inline unsigned char *libusb_control_transfer_get_data(
struct libusb_transfer *transfer)
{
return transfer->buffer + LIBUSB_CONTROL_SETUP_SIZE;
}
/** \ingroup libusb_asyncio
* Get the control setup packet of a control transfer. This convenience
* function is here to remind you that the control setup occupies the first
* 8 bytes of the transfer data buffer.
*
* Calling this function only makes sense from a transfer callback function,
* or situations where you have already allocated a suitably sized buffer at
* transfer->buffer.
*
* \param transfer a transfer
* \returns a casted pointer to the start of the transfer data buffer
*/
static inline struct libusb_control_setup *libusb_control_transfer_get_setup(
struct libusb_transfer *transfer)
{
return (struct libusb_control_setup *)(void *)transfer->buffer;
}
/** \ingroup libusb_asyncio
* Helper function to populate the setup packet (first 8 bytes of the data
* buffer) for a control transfer. The wIndex, wValue and wLength values should
* be given in host-endian byte order.
*
* \param buffer buffer to output the setup packet into
* This pointer must be aligned to at least 2 bytes boundary.
* \param bmRequestType see the
* \ref libusb_control_setup::bmRequestType "bmRequestType" field of
* \ref libusb_control_setup
* \param bRequest see the
* \ref libusb_control_setup::bRequest "bRequest" field of
* \ref libusb_control_setup
* \param wValue see the
* \ref libusb_control_setup::wValue "wValue" field of
* \ref libusb_control_setup
* \param wIndex see the
* \ref libusb_control_setup::wIndex "wIndex" field of
* \ref libusb_control_setup
* \param wLength see the
* \ref libusb_control_setup::wLength "wLength" field of
* \ref libusb_control_setup
*/
static inline void libusb_fill_control_setup(unsigned char *buffer,
uint8_t bmRequestType, uint8_t bRequest, uint16_t wValue, uint16_t wIndex,
uint16_t wLength)
{
struct libusb_control_setup *setup = (struct libusb_control_setup *)(void *)buffer;
setup->bmRequestType = bmRequestType;
setup->bRequest = bRequest;
setup->wValue = libusb_cpu_to_le16(wValue);
setup->wIndex = libusb_cpu_to_le16(wIndex);
setup->wLength = libusb_cpu_to_le16(wLength);
}
struct libusb_transfer * LIBUSB_CALL libusb_alloc_transfer(int iso_packets);
int LIBUSB_CALL libusb_submit_transfer(struct libusb_transfer *transfer);
int LIBUSB_CALL libusb_cancel_transfer(struct libusb_transfer *transfer);
void LIBUSB_CALL libusb_free_transfer(struct libusb_transfer *transfer);
void LIBUSB_CALL libusb_transfer_set_stream_id(
struct libusb_transfer *transfer, uint32_t stream_id);
uint32_t LIBUSB_CALL libusb_transfer_get_stream_id(
struct libusb_transfer *transfer);
/** \ingroup libusb_asyncio
* Helper function to populate the required \ref libusb_transfer fields
* for a control transfer.
*
* If you pass a transfer buffer to this function, the first 8 bytes will
* be interpreted as a control setup packet, and the wLength field will be
* used to automatically populate the \ref libusb_transfer::length "length"
* field of the transfer. Therefore the recommended approach is:
* -# Allocate a suitably sized data buffer (including space for control setup)
* -# Call libusb_fill_control_setup()
* -# If this is a host-to-device transfer with a data stage, put the data
* in place after the setup packet
* -# Call this function
* -# Call libusb_submit_transfer()
*
* It is also legal to pass a NULL buffer to this function, in which case this
* function will not attempt to populate the length field. Remember that you
* must then populate the buffer and length fields later.
*
* \param transfer the transfer to populate
* \param dev_handle handle of the device that will handle the transfer
* \param buffer data buffer. If provided, this function will interpret the
* first 8 bytes as a setup packet and infer the transfer length from that.
* This pointer must be aligned to at least 2 bytes boundary.
* \param callback callback function to be invoked on transfer completion
* \param user_data user data to pass to callback function
* \param timeout timeout for the transfer in milliseconds
*/
static inline void libusb_fill_control_transfer(
struct libusb_transfer *transfer, libusb_device_handle *dev_handle,
unsigned char *buffer, libusb_transfer_cb_fn callback, void *user_data,
unsigned int timeout)
{
struct libusb_control_setup *setup = (struct libusb_control_setup *)(void *)buffer;
transfer->dev_handle = dev_handle;
transfer->endpoint = 0;
transfer->type = LIBUSB_TRANSFER_TYPE_CONTROL;
transfer->timeout = timeout;
transfer->buffer = buffer;
if (setup)
transfer->length = (int) (LIBUSB_CONTROL_SETUP_SIZE
+ libusb_le16_to_cpu(setup->wLength));
transfer->user_data = user_data;
transfer->callback = callback;
}
/** \ingroup libusb_asyncio
* Helper function to populate the required \ref libusb_transfer fields
* for a bulk transfer.
*
* \param transfer the transfer to populate
* \param dev_handle handle of the device that will handle the transfer
* \param endpoint address of the endpoint where this transfer will be sent
* \param buffer data buffer
* \param length length of data buffer
* \param callback callback function to be invoked on transfer completion
* \param user_data user data to pass to callback function
* \param timeout timeout for the transfer in milliseconds
*/
static inline void libusb_fill_bulk_transfer(struct libusb_transfer *transfer,
libusb_device_handle *dev_handle, unsigned char endpoint,
unsigned char *buffer, int length, libusb_transfer_cb_fn callback,
void *user_data, unsigned int timeout)
{
transfer->dev_handle = dev_handle;
transfer->endpoint = endpoint;
transfer->type = LIBUSB_TRANSFER_TYPE_BULK;
transfer->timeout = timeout;
transfer->buffer = buffer;
transfer->length = length;
transfer->user_data = user_data;
transfer->callback = callback;
}
/** \ingroup libusb_asyncio
* Helper function to populate the required \ref libusb_transfer fields
* for a bulk transfer using bulk streams.
*
* Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103
*
* \param transfer the transfer to populate
* \param dev_handle handle of the device that will handle the transfer
* \param endpoint address of the endpoint where this transfer will be sent
* \param stream_id bulk stream id for this transfer
* \param buffer data buffer
* \param length length of data buffer
* \param callback callback function to be invoked on transfer completion
* \param user_data user data to pass to callback function
* \param timeout timeout for the transfer in milliseconds
*/
static inline void libusb_fill_bulk_stream_transfer(
struct libusb_transfer *transfer, libusb_device_handle *dev_handle,
unsigned char endpoint, uint32_t stream_id,
unsigned char *buffer, int length, libusb_transfer_cb_fn callback,
void *user_data, unsigned int timeout)
{
libusb_fill_bulk_transfer(transfer, dev_handle, endpoint, buffer,
length, callback, user_data, timeout);
transfer->type = LIBUSB_TRANSFER_TYPE_BULK_STREAM;
libusb_transfer_set_stream_id(transfer, stream_id);
}
/** \ingroup libusb_asyncio
* Helper function to populate the required \ref libusb_transfer fields
* for an interrupt transfer.
*
* \param transfer the transfer to populate
* \param dev_handle handle of the device that will handle the transfer
* \param endpoint address of the endpoint where this transfer will be sent
* \param buffer data buffer
* \param length length of data buffer
* \param callback callback function to be invoked on transfer completion
* \param user_data user data to pass to callback function
* \param timeout timeout for the transfer in milliseconds
*/
static inline void libusb_fill_interrupt_transfer(
struct libusb_transfer *transfer, libusb_device_handle *dev_handle,
unsigned char endpoint, unsigned char *buffer, int length,
libusb_transfer_cb_fn callback, void *user_data, unsigned int timeout)
{
transfer->dev_handle = dev_handle;
transfer->endpoint = endpoint;
transfer->type = LIBUSB_TRANSFER_TYPE_INTERRUPT;
transfer->timeout = timeout;
transfer->buffer = buffer;
transfer->length = length;
transfer->user_data = user_data;
transfer->callback = callback;
}
/** \ingroup libusb_asyncio
* Helper function to populate the required \ref libusb_transfer fields
* for an isochronous transfer.
*
* \param transfer the transfer to populate
* \param dev_handle handle of the device that will handle the transfer
* \param endpoint address of the endpoint where this transfer will be sent
* \param buffer data buffer
* \param length length of data buffer
* \param num_iso_packets the number of isochronous packets
* \param callback callback function to be invoked on transfer completion
* \param user_data user data to pass to callback function
* \param timeout timeout for the transfer in milliseconds
*/
static inline void libusb_fill_iso_transfer(struct libusb_transfer *transfer,
libusb_device_handle *dev_handle, unsigned char endpoint,
unsigned char *buffer, int length, int num_iso_packets,
libusb_transfer_cb_fn callback, void *user_data, unsigned int timeout)
{
transfer->dev_handle = dev_handle;
transfer->endpoint = endpoint;
transfer->type = LIBUSB_TRANSFER_TYPE_ISOCHRONOUS;
transfer->timeout = timeout;
transfer->buffer = buffer;
transfer->length = length;
transfer->num_iso_packets = num_iso_packets;
transfer->user_data = user_data;
transfer->callback = callback;
}
/** \ingroup libusb_asyncio
* Convenience function to set the length of all packets in an isochronous
* transfer, based on the num_iso_packets field in the transfer structure.
*
* \param transfer a transfer
* \param length the length to set in each isochronous packet descriptor
* \see libusb_get_max_packet_size()
*/
static inline void libusb_set_iso_packet_lengths(
struct libusb_transfer *transfer, unsigned int length)
{
int i;
for (i = 0; i < transfer->num_iso_packets; i++)
transfer->iso_packet_desc[i].length = length;
}
/** \ingroup libusb_asyncio
* Convenience function to locate the position of an isochronous packet
* within the buffer of an isochronous transfer.
*
* This is a thorough function which loops through all preceding packets,
* accumulating their lengths to find the position of the specified packet.
* Typically you will assign equal lengths to each packet in the transfer,
* and hence the above method is sub-optimal. You may wish to use
* libusb_get_iso_packet_buffer_simple() instead.
*
* \param transfer a transfer
* \param packet the packet to return the address of
* \returns the base address of the packet buffer inside the transfer buffer,
* or NULL if the packet does not exist.
* \see libusb_get_iso_packet_buffer_simple()
*/
static inline unsigned char *libusb_get_iso_packet_buffer(
struct libusb_transfer *transfer, unsigned int packet)
{
int i;
size_t offset = 0;
int _packet;
/* oops..slight bug in the API. packet is an unsigned int, but we use
* signed integers almost everywhere else. range-check and convert to
* signed to avoid compiler warnings. FIXME for libusb-2. */
if (packet > INT_MAX)
return NULL;
_packet = (int) packet;
if (_packet >= transfer->num_iso_packets)
return NULL;
for (i = 0; i < _packet; i++)
offset += transfer->iso_packet_desc[i].length;
return transfer->buffer + offset;
}
/** \ingroup libusb_asyncio
* Convenience function to locate the position of an isochronous packet
* within the buffer of an isochronous transfer, for transfers where each
* packet is of identical size.
*
* This function relies on the assumption that every packet within the transfer
* is of identical size to the first packet. Calculating the location of
* the packet buffer is then just a simple calculation:
* <tt>buffer + (packet_size * packet)</tt>
*
* Do not use this function on transfers other than those that have identical
* packet lengths for each packet.
*
* \param transfer a transfer
* \param packet the packet to return the address of
* \returns the base address of the packet buffer inside the transfer buffer,
* or NULL if the packet does not exist.
* \see libusb_get_iso_packet_buffer()
*/
static inline unsigned char *libusb_get_iso_packet_buffer_simple(
struct libusb_transfer *transfer, unsigned int packet)
{
int _packet;
/* oops..slight bug in the API. packet is an unsigned int, but we use
* signed integers almost everywhere else. range-check and convert to
* signed to avoid compiler warnings. FIXME for libusb-2. */
if (packet > INT_MAX)
return NULL;
_packet = (int) packet;
if (_packet >= transfer->num_iso_packets)
return NULL;
return transfer->buffer + ((int) transfer->iso_packet_desc[0].length * _packet);
}
/* sync I/O */
int LIBUSB_CALL libusb_control_transfer(libusb_device_handle *dev_handle,
uint8_t request_type, uint8_t bRequest, uint16_t wValue, uint16_t wIndex,
unsigned char *data, uint16_t wLength, unsigned int timeout);
int LIBUSB_CALL libusb_bulk_transfer(libusb_device_handle *dev_handle,
unsigned char endpoint, unsigned char *data, int length,
int *actual_length, unsigned int timeout);
int LIBUSB_CALL libusb_interrupt_transfer(libusb_device_handle *dev_handle,
unsigned char endpoint, unsigned char *data, int length,
int *actual_length, unsigned int timeout);
/** \ingroup libusb_desc
* Retrieve a descriptor from the default control pipe.
* This is a convenience function which formulates the appropriate control
* message to retrieve the descriptor.
*
* \param dev_handle a device handle
* \param desc_type the descriptor type, see \ref libusb_descriptor_type
* \param desc_index the index of the descriptor to retrieve
* \param data output buffer for descriptor
* \param length size of data buffer
* \returns number of bytes returned in data, or LIBUSB_ERROR code on failure
*/
static inline int libusb_get_descriptor(libusb_device_handle *dev_handle,
uint8_t desc_type, uint8_t desc_index, unsigned char *data, int length)
{
return libusb_control_transfer(dev_handle, LIBUSB_ENDPOINT_IN,
LIBUSB_REQUEST_GET_DESCRIPTOR, (uint16_t) ((desc_type << 8) | desc_index),
0, data, (uint16_t) length, 1000);
}
/** \ingroup libusb_desc
* Retrieve a descriptor from a device.
* This is a convenience function which formulates the appropriate control
* message to retrieve the descriptor. The string returned is Unicode, as
* detailed in the USB specifications.
*
* \param dev_handle a device handle
* \param desc_index the index of the descriptor to retrieve
* \param langid the language ID for the string descriptor
* \param data output buffer for descriptor
* \param length size of data buffer
* \returns number of bytes returned in data, or LIBUSB_ERROR code on failure
* \see libusb_get_string_descriptor_ascii()
*/
static inline int libusb_get_string_descriptor(libusb_device_handle *dev_handle,
uint8_t desc_index, uint16_t langid, unsigned char *data, int length)
{
return libusb_control_transfer(dev_handle, LIBUSB_ENDPOINT_IN,
LIBUSB_REQUEST_GET_DESCRIPTOR, (uint16_t)((LIBUSB_DT_STRING << 8) | desc_index),
langid, data, (uint16_t) length, 1000);
}
int LIBUSB_CALL libusb_get_string_descriptor_ascii(libusb_device_handle *dev_handle,
uint8_t desc_index, unsigned char *data, int length);
/* polling and timeouts */
int LIBUSB_CALL libusb_try_lock_events(libusb_context *ctx);
void LIBUSB_CALL libusb_lock_events(libusb_context *ctx);
void LIBUSB_CALL libusb_unlock_events(libusb_context *ctx);
int LIBUSB_CALL libusb_event_handling_ok(libusb_context *ctx);
int LIBUSB_CALL libusb_event_handler_active(libusb_context *ctx);
void LIBUSB_CALL libusb_interrupt_event_handler(libusb_context *ctx);
void LIBUSB_CALL libusb_lock_event_waiters(libusb_context *ctx);
void LIBUSB_CALL libusb_unlock_event_waiters(libusb_context *ctx);
int LIBUSB_CALL libusb_wait_for_event(libusb_context *ctx, struct timeval *tv);
int LIBUSB_CALL libusb_handle_events_timeout(libusb_context *ctx,
struct timeval *tv);
int LIBUSB_CALL libusb_handle_events_timeout_completed(libusb_context *ctx,
struct timeval *tv, int *completed);
int LIBUSB_CALL libusb_handle_events(libusb_context *ctx);
int LIBUSB_CALL libusb_handle_events_completed(libusb_context *ctx, int *completed);
int LIBUSB_CALL libusb_handle_events_locked(libusb_context *ctx,
struct timeval *tv);
int LIBUSB_CALL libusb_pollfds_handle_timeouts(libusb_context *ctx);
int LIBUSB_CALL libusb_get_next_timeout(libusb_context *ctx,
struct timeval *tv);
/** \ingroup libusb_poll
* File descriptor for polling
*/
struct libusb_pollfd {
/** Numeric file descriptor */
int fd;
/** Event flags to poll for from <poll.h>. POLLIN indicates that you
* should monitor this file descriptor for becoming ready to read from,
* and POLLOUT indicates that you should monitor this file descriptor for
* nonblocking write readiness. */
short events;
};
/** \ingroup libusb_poll
* Callback function, invoked when a new file descriptor should be added
* to the set of file descriptors monitored for events.
* \param fd the new file descriptor
* \param events events to monitor for, see \ref libusb_pollfd for a
* description
* \param user_data User data pointer specified in
* libusb_set_pollfd_notifiers() call
* \see libusb_set_pollfd_notifiers()
*/
typedef void (LIBUSB_CALL *libusb_pollfd_added_cb)(int fd, short events,
void *user_data);
/** \ingroup libusb_poll
* Callback function, invoked when a file descriptor should be removed from
* the set of file descriptors being monitored for events. After returning
* from this callback, do not use that file descriptor again.
* \param fd the file descriptor to stop monitoring
* \param user_data User data pointer specified in
* libusb_set_pollfd_notifiers() call
* \see libusb_set_pollfd_notifiers()
*/
typedef void (LIBUSB_CALL *libusb_pollfd_removed_cb)(int fd, void *user_data);
const struct libusb_pollfd ** LIBUSB_CALL libusb_get_pollfds(
libusb_context *ctx);
void LIBUSB_CALL libusb_free_pollfds(const struct libusb_pollfd **pollfds);
void LIBUSB_CALL libusb_set_pollfd_notifiers(libusb_context *ctx,
libusb_pollfd_added_cb added_cb, libusb_pollfd_removed_cb removed_cb,
void *user_data);
/** \ingroup libusb_hotplug
* Callback handle.
*
* Callbacks handles are generated by libusb_hotplug_register_callback()
* and can be used to deregister callbacks. Callback handles are unique
* per libusb_context and it is safe to call libusb_hotplug_deregister_callback()
* on an already deregistered callback.
*
* Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
*
* For more information, see \ref libusb_hotplug.
*/
typedef int libusb_hotplug_callback_handle;
/** \ingroup libusb_hotplug
*
* Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
*
* Hotplug events */
typedef enum {
/** A device has been plugged in and is ready to use */
LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED = (1 << 0),
/** A device has left and is no longer available.
* It is the user's responsibility to call libusb_close on any handle associated with a disconnected device.
* It is safe to call libusb_get_device_descriptor on a device that has left */
LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT = (1 << 1)
} libusb_hotplug_event;
/** \ingroup libusb_hotplug
*
* Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
*
* Hotplug flags */
typedef enum {
/** Arm the callback and fire it for all matching currently attached devices. */
LIBUSB_HOTPLUG_ENUMERATE = (1 << 0)
} libusb_hotplug_flag;
/** \ingroup libusb_hotplug
* Convenience macro when not using any flags */
#define LIBUSB_HOTPLUG_NO_FLAGS 0
/** \ingroup libusb_hotplug
* Wildcard matching for hotplug events */
#define LIBUSB_HOTPLUG_MATCH_ANY -1
/** \ingroup libusb_hotplug
* Hotplug callback function type. When requesting hotplug event notifications,
* you pass a pointer to a callback function of this type.
*
* This callback may be called by an internal event thread and as such it is
* recommended the callback do minimal processing before returning.
*
* libusb will call this function later, when a matching event had happened on
* a matching device. See \ref libusb_hotplug for more information.
*
* It is safe to call either libusb_hotplug_register_callback() or
* libusb_hotplug_deregister_callback() from within a callback function.
*
* Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
*
* \param ctx context of this notification
* \param device libusb_device this event occurred on
* \param event event that occurred
* \param user_data user data provided when this callback was registered
* \returns bool whether this callback is finished processing events.
* returning 1 will cause this callback to be deregistered
*/
typedef int (LIBUSB_CALL *libusb_hotplug_callback_fn)(libusb_context *ctx,
libusb_device *device, libusb_hotplug_event event, void *user_data);
/** \ingroup libusb_hotplug
* Register a hotplug callback function
*
* Register a callback with the libusb_context. The callback will fire
* when a matching event occurs on a matching device. The callback is
* armed until either it is deregistered with libusb_hotplug_deregister_callback()
* or the supplied callback returns 1 to indicate it is finished processing events.
*
* If the \ref LIBUSB_HOTPLUG_ENUMERATE is passed the callback will be
* called with a \ref LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED for all devices
* already plugged into the machine. Note that libusb modifies its internal
* device list from a separate thread, while calling hotplug callbacks from
* libusb_handle_events(), so it is possible for a device to already be present
* on, or removed from, its internal device list, while the hotplug callbacks
* still need to be dispatched. This means that when using \ref
* LIBUSB_HOTPLUG_ENUMERATE, your callback may be called twice for the arrival
* of the same device, once from libusb_hotplug_register_callback() and once
* from libusb_handle_events(); and/or your callback may be called for the
* removal of a device for which an arrived call was never made.
*
* Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
*
* \param[in] ctx context to register this callback with
* \param[in] events bitwise or of hotplug events that will trigger this callback.
* See \ref libusb_hotplug_event
* \param[in] flags bitwise or of hotplug flags that affect registration.
* See \ref libusb_hotplug_flag
* \param[in] vendor_id the vendor id to match or \ref LIBUSB_HOTPLUG_MATCH_ANY
* \param[in] product_id the product id to match or \ref LIBUSB_HOTPLUG_MATCH_ANY
* \param[in] dev_class the device class to match or \ref LIBUSB_HOTPLUG_MATCH_ANY
* \param[in] cb_fn the function to be invoked on a matching event/device
* \param[in] user_data user data to pass to the callback function
* \param[out] callback_handle pointer to store the handle of the allocated callback (can be NULL)
* \returns LIBUSB_SUCCESS on success LIBUSB_ERROR code on failure
*/
int LIBUSB_CALL libusb_hotplug_register_callback(libusb_context *ctx,
int events, int flags,
int vendor_id, int product_id, int dev_class,
libusb_hotplug_callback_fn cb_fn, void *user_data,
libusb_hotplug_callback_handle *callback_handle);
/** \ingroup libusb_hotplug
* Deregisters a hotplug callback.
*
* Deregister a callback from a libusb_context. This function is safe to call from within
* a hotplug callback.
*
* Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
*
* \param[in] ctx context this callback is registered with
* \param[in] callback_handle the handle of the callback to deregister
*/
void LIBUSB_CALL libusb_hotplug_deregister_callback(libusb_context *ctx,
libusb_hotplug_callback_handle callback_handle);
/** \ingroup libusb_hotplug
* Gets the user_data associated with a hotplug callback.
*
* Since version v1.0.24 \ref LIBUSB_API_VERSION >= 0x01000108
*
* \param[in] ctx context this callback is registered with
* \param[in] callback_handle the handle of the callback to get the user_data of
*/
void * LIBUSB_CALL libusb_hotplug_get_user_data(libusb_context *ctx,
libusb_hotplug_callback_handle callback_handle);
/** \ingroup libusb_lib
* Available option values for libusb_set_option().
*/
enum libusb_option {
/** Set the log message verbosity.
*
* The default level is LIBUSB_LOG_LEVEL_NONE, which means no messages are ever
* printed. If you choose to increase the message verbosity level, ensure
* that your application does not close the stderr file descriptor.
*
* You are advised to use level LIBUSB_LOG_LEVEL_WARNING. libusb is conservative
* with its message logging and most of the time, will only log messages that
* explain error conditions and other oddities. This will help you debug
* your software.
*
* If the LIBUSB_DEBUG environment variable was set when libusb was
* initialized, this function does nothing: the message verbosity is fixed
* to the value in the environment variable.
*
* If libusb was compiled without any message logging, this function does
* nothing: you'll never get any messages.
*
* If libusb was compiled with verbose debug message logging, this function
* does nothing: you'll always get messages from all levels.
*/
LIBUSB_OPTION_LOG_LEVEL = 0,
/** Use the UsbDk backend for a specific context, if available.
*
* This option should be set immediately after calling libusb_init(), otherwise
* unspecified behavior may occur.
*
* Only valid on Windows.
*/
LIBUSB_OPTION_USE_USBDK = 1,
/** Set libusb has weak authority. With this option, libusb will skip
* scan devices in libusb_init.
*
* This option should be set before calling libusb_init(), otherwise
* libusb_init will failed. Normally libusb_wrap_sys_device need set
* this option.
*
* Only valid on Linux-based operating system, such as Android.
*/
LIBUSB_OPTION_WEAK_AUTHORITY = 2
};
int LIBUSB_CALL libusb_set_option(libusb_context *ctx, enum libusb_option option, ...);
#if defined(__cplusplus)
}
#endif
#endif