diff --git a/CMakeLists.txt b/CMakeLists.txt
index b2f81b1..3af9e81 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -1,6 +1,9 @@
 cmake_minimum_required(VERSION 3.0.2)
 
 list(APPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/cmake)
+if (${CMAKE_VERSION} VERSION_LESS "3.17.0")
+  list(APPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/cmake-compat)
+endif()
 
 project(libzip
   VERSION 1.7.2.1
@@ -294,6 +297,12 @@
   endif()
   set(LIBS "${LIBS} -l${LIB}")
 endforeach()
+string(REGEX REPLACE "-lBZip2::BZip2" "-lbz2" LIBS ${LIBS})
+string(REGEX REPLACE "-lLibLZMA::LibLZMA" "-llzma" LIBS ${LIBS})
+string(REGEX REPLACE "-lOpenSSL::Crypto" "-lssl -lcrypto" LIBS ${LIBS})
+string(REGEX REPLACE "-lZLIB::ZLIB" "-lz" LIBS ${LIBS})
+string(REGEX REPLACE "-lGnuTLS::GnuTLS" "-lgnutls" LIBS ${LIBS})
+string(REGEX REPLACE "-lNettle::Nettle" "-lnettle" LIBS ${LIBS})
 configure_file(libzip.pc.in libzip.pc @ONLY)
 if(LIBZIP_DO_INSTALL)
   install(FILES ${PROJECT_BINARY_DIR}/libzip.pc DESTINATION ${CMAKE_INSTALL_LIBDIR}/pkgconfig)
diff --git a/cmake-compat/CMakePushCheckState.cmake b/cmake-compat/CMakePushCheckState.cmake
new file mode 100644
index 0000000..3e519ee
--- /dev/null
+++ b/cmake-compat/CMakePushCheckState.cmake
@@ -0,0 +1,91 @@
+# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
+# file Copyright.txt or https://cmake.org/licensing for details.
+
+#[=======================================================================[.rst:
+CMakePushCheckState
+-------------------
+
+
+
+This module defines three macros: ``CMAKE_PUSH_CHECK_STATE()``
+``CMAKE_POP_CHECK_STATE()`` and ``CMAKE_RESET_CHECK_STATE()`` These macros can
+be used to save, restore and reset (i.e., clear contents) the state of
+the variables ``CMAKE_REQUIRED_FLAGS``, ``CMAKE_REQUIRED_DEFINITIONS``,
+``CMAKE_REQUIRED_LINK_OPTIONS``, ``CMAKE_REQUIRED_LIBRARIES``,
+``CMAKE_REQUIRED_INCLUDES`` and ``CMAKE_EXTRA_INCLUDE_FILES`` used by the
+various Check-files coming with CMake, like e.g. ``check_function_exists()``
+etc.
+The variable contents are pushed on a stack, pushing multiple times is
+supported.  This is useful e.g.  when executing such tests in a Find-module,
+where they have to be set, but after the Find-module has been executed they
+should have the same value as they had before.
+
+``CMAKE_PUSH_CHECK_STATE()`` macro receives optional argument ``RESET``.
+Whether it's specified, ``CMAKE_PUSH_CHECK_STATE()`` will set all
+``CMAKE_REQUIRED_*`` variables to empty values, same as
+``CMAKE_RESET_CHECK_STATE()`` call will do.
+
+Usage:
+
+.. code-block:: cmake
+
+   cmake_push_check_state(RESET)
+   set(CMAKE_REQUIRED_DEFINITIONS -DSOME_MORE_DEF)
+   check_function_exists(...)
+   cmake_reset_check_state()
+   set(CMAKE_REQUIRED_DEFINITIONS -DANOTHER_DEF)
+   check_function_exists(...)
+   cmake_pop_check_state()
+#]=======================================================================]
+
+macro(CMAKE_RESET_CHECK_STATE)
+
+  set(CMAKE_EXTRA_INCLUDE_FILES)
+  set(CMAKE_REQUIRED_INCLUDES)
+  set(CMAKE_REQUIRED_DEFINITIONS)
+  set(CMAKE_REQUIRED_LINK_OPTIONS)
+  set(CMAKE_REQUIRED_LIBRARIES)
+  set(CMAKE_REQUIRED_FLAGS)
+  set(CMAKE_REQUIRED_QUIET)
+
+endmacro()
+
+macro(CMAKE_PUSH_CHECK_STATE)
+
+  if(NOT DEFINED _CMAKE_PUSH_CHECK_STATE_COUNTER)
+    set(_CMAKE_PUSH_CHECK_STATE_COUNTER 0)
+  endif()
+
+  math(EXPR _CMAKE_PUSH_CHECK_STATE_COUNTER "${_CMAKE_PUSH_CHECK_STATE_COUNTER}+1")
+
+  set(_CMAKE_EXTRA_INCLUDE_FILES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}    ${CMAKE_EXTRA_INCLUDE_FILES})
+  set(_CMAKE_REQUIRED_INCLUDES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}      ${CMAKE_REQUIRED_INCLUDES})
+  set(_CMAKE_REQUIRED_DEFINITIONS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}   ${CMAKE_REQUIRED_DEFINITIONS})
+  set(_CMAKE_REQUIRED_LINK_OPTIONS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}  ${CMAKE_REQUIRED_LINK_OPTIONS})
+  set(_CMAKE_REQUIRED_LIBRARIES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}     ${CMAKE_REQUIRED_LIBRARIES})
+  set(_CMAKE_REQUIRED_FLAGS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}         ${CMAKE_REQUIRED_FLAGS})
+  set(_CMAKE_REQUIRED_QUIET_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}         ${CMAKE_REQUIRED_QUIET})
+
+  if (${ARGC} GREATER 0 AND "${ARGV0}" STREQUAL "RESET")
+    cmake_reset_check_state()
+  endif()
+
+endmacro()
+
+macro(CMAKE_POP_CHECK_STATE)
+
+# don't pop more than we pushed
+  if("${_CMAKE_PUSH_CHECK_STATE_COUNTER}" GREATER "0")
+
+    set(CMAKE_EXTRA_INCLUDE_FILES    ${_CMAKE_EXTRA_INCLUDE_FILES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+    set(CMAKE_REQUIRED_INCLUDES      ${_CMAKE_REQUIRED_INCLUDES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+    set(CMAKE_REQUIRED_DEFINITIONS   ${_CMAKE_REQUIRED_DEFINITIONS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+    set(CMAKE_REQUIRED_LINK_OPTIONS  ${_CMAKE_REQUIRED_LINK_OPTIONS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+    set(CMAKE_REQUIRED_LIBRARIES     ${_CMAKE_REQUIRED_LIBRARIES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+    set(CMAKE_REQUIRED_FLAGS         ${_CMAKE_REQUIRED_FLAGS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+    set(CMAKE_REQUIRED_QUIET         ${_CMAKE_REQUIRED_QUIET_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+
+    math(EXPR _CMAKE_PUSH_CHECK_STATE_COUNTER "${_CMAKE_PUSH_CHECK_STATE_COUNTER}-1")
+  endif()
+
+endmacro()
diff --git a/cmake-compat/CheckLibraryExists.cmake b/cmake-compat/CheckLibraryExists.cmake
new file mode 100644
index 0000000..76901ab
--- /dev/null
+++ b/cmake-compat/CheckLibraryExists.cmake
@@ -0,0 +1,102 @@
+# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
+# file Copyright.txt or https://cmake.org/licensing for details.
+
+#[=======================================================================[.rst:
+CheckLibraryExists
+------------------
+
+Check if the function exists.
+
+.. command:: CHECK_LIBRARY_EXISTS
+
+  .. code-block:: cmake
+
+    CHECK_LIBRARY_EXISTS(LIBRARY FUNCTION LOCATION VARIABLE)
+
+  ::
+
+    LIBRARY  - the name of the library you are looking for
+    FUNCTION - the name of the function
+    LOCATION - location where the library should be found
+    VARIABLE - variable to store the result
+               Will be created as an internal cache variable.
+
+
+
+The following variables may be set before calling this macro to modify
+the way the check is run:
+
+::
+
+  CMAKE_REQUIRED_FLAGS = string of compile command line flags
+  CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+  CMAKE_REQUIRED_LINK_OPTIONS = list of options to pass to link command
+  CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+  CMAKE_REQUIRED_QUIET = execute quietly without messages
+#]=======================================================================]
+
+if(__CheckLibraryExists_cmake__)
+  return()
+endif()
+set(__CheckLibraryExists_cmake__ TRUE)
+
+macro(CHECK_LIBRARY_EXISTS LIBRARY FUNCTION LOCATION VARIABLE)
+  if(NOT DEFINED "${VARIABLE}")
+    set(MACRO_CHECK_LIBRARY_EXISTS_DEFINITION
+      "-DCHECK_FUNCTION_EXISTS=${FUNCTION} ${CMAKE_REQUIRED_FLAGS}")
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(CHECK_START "Looking for ${FUNCTION} in ${LIBRARY}")
+    endif()
+    set(CHECK_LIBRARY_EXISTS_LINK_OPTIONS)
+    if(CMAKE_REQUIRED_LINK_OPTIONS)
+      set(CHECK_LIBRARY_EXISTS_LINK_OPTIONS
+        LINK_OPTIONS ${CMAKE_REQUIRED_LINK_OPTIONS})
+    endif()
+    set(CHECK_LIBRARY_EXISTS_LIBRARIES ${LIBRARY})
+    if(CMAKE_REQUIRED_LIBRARIES)
+      set(CHECK_LIBRARY_EXISTS_LIBRARIES
+        ${CHECK_LIBRARY_EXISTS_LIBRARIES} ${CMAKE_REQUIRED_LIBRARIES})
+    endif()
+
+    if(CMAKE_C_COMPILER_LOADED)
+      set(_cle_source ${CMAKE_ROOT}/Modules/CheckFunctionExists.c)
+    elseif(CMAKE_CXX_COMPILER_LOADED)
+      set(_cle_source ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CheckLibraryExists/CheckFunctionExists.cxx)
+      configure_file(${CMAKE_ROOT}/Modules/CheckFunctionExists.c "${_cle_source}" COPYONLY)
+    else()
+      message(FATAL_ERROR "CHECK_FUNCTION_EXISTS needs either C or CXX language enabled")
+    endif()
+
+    try_compile(${VARIABLE}
+      ${CMAKE_BINARY_DIR}
+      ${_cle_source}
+      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+      ${CHECK_LIBRARY_EXISTS_LINK_OPTIONS}
+      LINK_LIBRARIES ${CHECK_LIBRARY_EXISTS_LIBRARIES}
+      CMAKE_FLAGS
+      -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_LIBRARY_EXISTS_DEFINITION}
+      -DLINK_DIRECTORIES:STRING=${LOCATION}
+      OUTPUT_VARIABLE OUTPUT)
+    unset(_cle_source)
+
+    if(${VARIABLE})
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(CHECK_PASS "found")
+      endif()
+      set(${VARIABLE} 1 CACHE INTERNAL "Have library ${LIBRARY}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Determining if the function ${FUNCTION} exists in the ${LIBRARY} "
+        "passed with the following output:\n"
+        "${OUTPUT}\n\n")
+    else()
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(CHECK_FAIL "not found")
+      endif()
+      set(${VARIABLE} "" CACHE INTERNAL "Have library ${LIBRARY}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Determining if the function ${FUNCTION} exists in the ${LIBRARY} "
+        "failed with the following output:\n"
+        "${OUTPUT}\n\n")
+    endif()
+  endif()
+endmacro()
diff --git a/cmake-compat/CheckSymbolExists.cmake b/cmake-compat/CheckSymbolExists.cmake
new file mode 100644
index 0000000..79d3d7d
--- /dev/null
+++ b/cmake-compat/CheckSymbolExists.cmake
@@ -0,0 +1,169 @@
+# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
+# file Copyright.txt or https://cmake.org/licensing for details.
+
+#[=======================================================================[.rst:
+CheckSymbolExists
+-----------------
+
+Provides a macro to check if a symbol exists as a function, variable,
+or macro in ``C``.
+
+.. command:: check_symbol_exists
+
+  .. code-block:: cmake
+
+    check_symbol_exists(<symbol> <files> <variable>)
+
+  Check that the ``<symbol>`` is available after including given header
+  ``<files>`` and store the result in a ``<variable>``.  Specify the list
+  of files in one argument as a semicolon-separated list.
+  ``<variable>`` will be created as an internal cache variable.
+
+If the header files define the symbol as a macro it is considered
+available and assumed to work.  If the header files declare the symbol
+as a function or variable then the symbol must also be available for
+linking (so intrinsics may not be detected).
+If the symbol is a type, enum value, or intrinsic it will not be recognized
+(consider using :module:`CheckTypeSize` or :module:`CheckCSourceCompiles`).
+If the check needs to be done in C++, consider using
+:module:`CheckCXXSymbolExists` instead.
+
+The following variables may be set before calling this macro to modify
+the way the check is run:
+
+``CMAKE_REQUIRED_FLAGS``
+  string of compile command line flags.
+``CMAKE_REQUIRED_DEFINITIONS``
+  a :ref:`;-list <CMake Language Lists>` of macros to define (-DFOO=bar).
+``CMAKE_REQUIRED_INCLUDES``
+  a :ref:`;-list <CMake Language Lists>` of header search paths to pass to
+  the compiler.
+``CMAKE_REQUIRED_LINK_OPTIONS``
+  a :ref:`;-list <CMake Language Lists>` of options to add to the link command.
+``CMAKE_REQUIRED_LIBRARIES``
+  a :ref:`;-list <CMake Language Lists>` of libraries to add to the link
+  command. See policy :policy:`CMP0075`.
+``CMAKE_REQUIRED_QUIET``
+  execute quietly without messages.
+
+For example:
+
+.. code-block:: cmake
+
+  include(CheckSymbolExists)
+
+  # Check for macro SEEK_SET
+  check_symbol_exists(SEEK_SET "stdio.h" HAVE_SEEK_SET)
+  # Check for function fopen
+  check_symbol_exists(fopen "stdio.h" HAVE_FOPEN)
+#]=======================================================================]
+
+if(__CheckSymbolExists_cmake__)
+  return()
+endif()
+set(__CheckSymbolExists_cmake__ TRUE)
+
+cmake_policy(PUSH)
+cmake_policy(SET CMP0054 NEW) # if() quoted variables not dereferenced
+
+macro(CHECK_SYMBOL_EXISTS SYMBOL FILES VARIABLE)
+  if(CMAKE_C_COMPILER_LOADED)
+    __CHECK_SYMBOL_EXISTS_IMPL("${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckSymbolExists.c" "${SYMBOL}" "${FILES}" "${VARIABLE}" )
+  elseif(CMAKE_CXX_COMPILER_LOADED)
+    __CHECK_SYMBOL_EXISTS_IMPL("${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckSymbolExists.cxx" "${SYMBOL}" "${FILES}" "${VARIABLE}" )
+  else()
+    message(FATAL_ERROR "CHECK_SYMBOL_EXISTS needs either C or CXX language enabled")
+  endif()
+endmacro()
+
+macro(__CHECK_SYMBOL_EXISTS_IMPL SOURCEFILE SYMBOL FILES VARIABLE)
+  if(NOT DEFINED "${VARIABLE}" OR "x${${VARIABLE}}" STREQUAL "x${VARIABLE}")
+    set(CMAKE_CONFIGURABLE_FILE_CONTENT "/* */\n")
+    set(MACRO_CHECK_SYMBOL_EXISTS_FLAGS ${CMAKE_REQUIRED_FLAGS})
+    if(CMAKE_REQUIRED_LINK_OPTIONS)
+      set(CHECK_SYMBOL_EXISTS_LINK_OPTIONS
+        LINK_OPTIONS ${CMAKE_REQUIRED_LINK_OPTIONS})
+    else()
+      set(CHECK_SYMBOL_EXISTS_LINK_OPTIONS)
+    endif()
+    if(CMAKE_REQUIRED_LIBRARIES)
+      set(CHECK_SYMBOL_EXISTS_LIBS
+        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
+    else()
+      set(CHECK_SYMBOL_EXISTS_LIBS)
+    endif()
+    if(CMAKE_REQUIRED_INCLUDES)
+      set(CMAKE_SYMBOL_EXISTS_INCLUDES
+        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
+    else()
+      set(CMAKE_SYMBOL_EXISTS_INCLUDES)
+    endif()
+    foreach(FILE ${FILES})
+      string(APPEND CMAKE_CONFIGURABLE_FILE_CONTENT
+        "#include <${FILE}>\n")
+    endforeach()
+    string(APPEND CMAKE_CONFIGURABLE_FILE_CONTENT "
+int main(int argc, char** argv)
+{
+  (void)argv;")
+    set(_CSE_CHECK_NON_MACRO "return ((int*)(&${SYMBOL}))[argc];")
+    if("${SYMBOL}" MATCHES "^[a-zA-Z_][a-zA-Z0-9_]*$")
+      # The SYMBOL has a legal macro name.  Test whether it exists as a macro.
+      string(APPEND CMAKE_CONFIGURABLE_FILE_CONTENT "
+#ifndef ${SYMBOL}
+  ${_CSE_CHECK_NON_MACRO}
+#else
+  (void)argc;
+  return 0;
+#endif")
+    else()
+      # The SYMBOL cannot be a macro (e.g., a template function).
+      string(APPEND CMAKE_CONFIGURABLE_FILE_CONTENT "
+  ${_CSE_CHECK_NON_MACRO}")
+    endif()
+    string(APPEND CMAKE_CONFIGURABLE_FILE_CONTENT "
+}")
+    unset(_CSE_CHECK_NON_MACRO)
+
+    configure_file("${CMAKE_ROOT}/Modules/CMakeConfigurableFile.in"
+      "${SOURCEFILE}" @ONLY)
+
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(CHECK_START "Looking for ${SYMBOL}")
+    endif()
+    try_compile(${VARIABLE}
+      ${CMAKE_BINARY_DIR}
+      "${SOURCEFILE}"
+      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+      ${CHECK_SYMBOL_EXISTS_LINK_OPTIONS}
+      ${CHECK_SYMBOL_EXISTS_LIBS}
+      CMAKE_FLAGS
+      -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_SYMBOL_EXISTS_FLAGS}
+      "${CMAKE_SYMBOL_EXISTS_INCLUDES}"
+      OUTPUT_VARIABLE OUTPUT)
+    if(${VARIABLE})
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(CHECK_PASS "found")
+      endif()
+      set(${VARIABLE} 1 CACHE INTERNAL "Have symbol ${SYMBOL}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Determining if the ${SYMBOL} "
+        "exist passed with the following output:\n"
+        "${OUTPUT}\nFile ${SOURCEFILE}:\n"
+        "${CMAKE_CONFIGURABLE_FILE_CONTENT}\n")
+    else()
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(CHECK_FAIL "not found")
+      endif()
+      set(${VARIABLE} "" CACHE INTERNAL "Have symbol ${SYMBOL}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Determining if the ${SYMBOL} "
+        "exist failed with the following output:\n"
+        "${OUTPUT}\nFile ${SOURCEFILE}:\n"
+        "${CMAKE_CONFIGURABLE_FILE_CONTENT}\n")
+    endif()
+    unset(CMAKE_CONFIGURABLE_FILE_CONTENT)
+  endif()
+endmacro()
+
+cmake_policy(POP)
diff --git a/cmake-compat/FindBZip2.cmake b/cmake-compat/FindBZip2.cmake
new file mode 100644
index 0000000..98ab72c
--- /dev/null
+++ b/cmake-compat/FindBZip2.cmake
@@ -0,0 +1,104 @@
+# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
+# file Copyright.txt or https://cmake.org/licensing for details.
+
+#[=======================================================================[.rst:
+FindBZip2
+---------
+
+Try to find BZip2
+
+IMPORTED Targets
+^^^^^^^^^^^^^^^^
+
+This module defines :prop_tgt:`IMPORTED` target ``BZip2::BZip2``, if
+BZip2 has been found.
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module defines the following variables:
+
+``BZIP2_FOUND``
+  system has BZip2
+``BZIP2_INCLUDE_DIRS``
+  the BZip2 include directories
+``BZIP2_LIBRARIES``
+  Link these to use BZip2
+``BZIP2_NEED_PREFIX``
+  this is set if the functions are prefixed with ``BZ2_``
+``BZIP2_VERSION_STRING``
+  the version of BZip2 found
+
+Cache variables
+^^^^^^^^^^^^^^^
+
+The following cache variables may also be set:
+
+``BZIP2_INCLUDE_DIR``
+  the BZip2 include directory
+#]=======================================================================]
+
+set(_BZIP2_PATHS PATHS
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\GnuWin32\\Bzip2;InstallPath]"
+  )
+
+find_path(BZIP2_INCLUDE_DIR bzlib.h ${_BZIP2_PATHS} PATH_SUFFIXES include)
+
+if (NOT BZIP2_LIBRARIES)
+    find_library(BZIP2_LIBRARY_RELEASE NAMES bz2 bzip2 libbz2 libbzip2 ${_BZIP2_PATHS} PATH_SUFFIXES lib)
+    find_library(BZIP2_LIBRARY_DEBUG NAMES bz2d bzip2d libbz2d libbzip2d ${_BZIP2_PATHS} PATH_SUFFIXES lib)
+
+    include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
+    SELECT_LIBRARY_CONFIGURATIONS(BZIP2)
+else ()
+    file(TO_CMAKE_PATH "${BZIP2_LIBRARIES}" BZIP2_LIBRARIES)
+endif ()
+
+if (BZIP2_INCLUDE_DIR AND EXISTS "${BZIP2_INCLUDE_DIR}/bzlib.h")
+    file(STRINGS "${BZIP2_INCLUDE_DIR}/bzlib.h" BZLIB_H REGEX "bzip2/libbzip2 version [0-9]+\\.[^ ]+ of [0-9]+ ")
+    string(REGEX REPLACE ".* bzip2/libbzip2 version ([0-9]+\\.[^ ]+) of [0-9]+ .*" "\\1" BZIP2_VERSION_STRING "${BZLIB_H}")
+endif ()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(BZip2
+                                  REQUIRED_VARS BZIP2_LIBRARIES BZIP2_INCLUDE_DIR
+                                  VERSION_VAR BZIP2_VERSION_STRING)
+
+if (BZIP2_FOUND)
+  set(BZIP2_INCLUDE_DIRS ${BZIP2_INCLUDE_DIR})
+  include(${CMAKE_CURRENT_LIST_DIR}/CheckSymbolExists.cmake)
+  include(${CMAKE_CURRENT_LIST_DIR}/CMakePushCheckState.cmake)
+  cmake_push_check_state()
+  set(CMAKE_REQUIRED_QUIET ${BZip2_FIND_QUIETLY})
+  set(CMAKE_REQUIRED_INCLUDES ${BZIP2_INCLUDE_DIR})
+  set(CMAKE_REQUIRED_LIBRARIES ${BZIP2_LIBRARIES})
+  CHECK_SYMBOL_EXISTS(BZ2_bzCompressInit "bzlib.h" BZIP2_NEED_PREFIX)
+  cmake_pop_check_state()
+
+  if(NOT TARGET BZip2::BZip2)
+    add_library(BZip2::BZip2 UNKNOWN IMPORTED)
+    set_target_properties(BZip2::BZip2 PROPERTIES
+      INTERFACE_INCLUDE_DIRECTORIES "${BZIP2_INCLUDE_DIRS}")
+
+    if(BZIP2_LIBRARY_RELEASE)
+      set_property(TARGET BZip2::BZip2 APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS RELEASE)
+      set_target_properties(BZip2::BZip2 PROPERTIES
+        IMPORTED_LOCATION_RELEASE "${BZIP2_LIBRARY_RELEASE}")
+    endif()
+
+    if(BZIP2_LIBRARY_DEBUG)
+      set_property(TARGET BZip2::BZip2 APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS DEBUG)
+      set_target_properties(BZip2::BZip2 PROPERTIES
+        IMPORTED_LOCATION_DEBUG "${BZIP2_LIBRARY_DEBUG}")
+    endif()
+
+    if(NOT BZIP2_LIBRARY_RELEASE AND NOT BZIP2_LIBRARY_DEBUG)
+      set_property(TARGET BZip2::BZip2 APPEND PROPERTY
+        IMPORTED_LOCATION "${BZIP2_LIBRARY}")
+    endif()
+  endif()
+endif ()
+
+mark_as_advanced(BZIP2_INCLUDE_DIR)
diff --git a/cmake-compat/FindLibLZMA.cmake b/cmake-compat/FindLibLZMA.cmake
new file mode 100644
index 0000000..200d6bf
--- /dev/null
+++ b/cmake-compat/FindLibLZMA.cmake
@@ -0,0 +1,124 @@
+# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
+# file Copyright.txt or https://cmake.org/licensing for details.
+
+#[=======================================================================[.rst:
+FindLibLZMA
+-----------
+
+Find LZMA compression algorithm headers and library.
+
+
+Imported Targets
+^^^^^^^^^^^^^^^^
+
+This module defines :prop_tgt:`IMPORTED` target ``LibLZMA::LibLZMA``, if
+liblzma has been found.
+
+Result variables
+^^^^^^^^^^^^^^^^
+
+This module will set the following variables in your project:
+
+``LIBLZMA_FOUND``
+  True if liblzma headers and library were found.
+``LIBLZMA_INCLUDE_DIRS``
+  Directory where liblzma headers are located.
+``LIBLZMA_LIBRARIES``
+  Lzma libraries to link against.
+``LIBLZMA_HAS_AUTO_DECODER``
+  True if lzma_auto_decoder() is found (required).
+``LIBLZMA_HAS_EASY_ENCODER``
+  True if lzma_easy_encoder() is found (required).
+``LIBLZMA_HAS_LZMA_PRESET``
+  True if lzma_lzma_preset() is found (required).
+``LIBLZMA_VERSION_MAJOR``
+  The major version of lzma
+``LIBLZMA_VERSION_MINOR``
+  The minor version of lzma
+``LIBLZMA_VERSION_PATCH``
+  The patch version of lzma
+``LIBLZMA_VERSION_STRING``
+  version number as a string (ex: "5.0.3")
+#]=======================================================================]
+
+find_path(LIBLZMA_INCLUDE_DIR lzma.h )
+if(NOT LIBLZMA_LIBRARY)
+  find_library(LIBLZMA_LIBRARY_RELEASE NAMES lzma liblzma PATH_SUFFIXES lib)
+  find_library(LIBLZMA_LIBRARY_DEBUG NAMES lzmad liblzmad PATH_SUFFIXES lib)
+  include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
+  select_library_configurations(LIBLZMA)
+else()
+  file(TO_CMAKE_PATH "${LIBLZMA_LIBRARY}" LIBLZMA_LIBRARY)
+endif()
+
+if(LIBLZMA_INCLUDE_DIR AND EXISTS "${LIBLZMA_INCLUDE_DIR}/lzma/version.h")
+    file(STRINGS "${LIBLZMA_INCLUDE_DIR}/lzma/version.h" LIBLZMA_HEADER_CONTENTS REGEX "#define LZMA_VERSION_[A-Z]+ [0-9]+")
+
+    string(REGEX REPLACE ".*#define LZMA_VERSION_MAJOR ([0-9]+).*" "\\1" LIBLZMA_VERSION_MAJOR "${LIBLZMA_HEADER_CONTENTS}")
+    string(REGEX REPLACE ".*#define LZMA_VERSION_MINOR ([0-9]+).*" "\\1" LIBLZMA_VERSION_MINOR "${LIBLZMA_HEADER_CONTENTS}")
+    string(REGEX REPLACE ".*#define LZMA_VERSION_PATCH ([0-9]+).*" "\\1" LIBLZMA_VERSION_PATCH "${LIBLZMA_HEADER_CONTENTS}")
+
+    set(LIBLZMA_VERSION_STRING "${LIBLZMA_VERSION_MAJOR}.${LIBLZMA_VERSION_MINOR}.${LIBLZMA_VERSION_PATCH}")
+    unset(LIBLZMA_HEADER_CONTENTS)
+endif()
+
+# We're using new code known now as XZ, even library still been called LZMA
+# it can be found in http://tukaani.org/xz/
+# Avoid using old codebase
+if (LIBLZMA_LIBRARY)
+  include(${CMAKE_CURRENT_LIST_DIR}/CheckLibraryExists.cmake)
+  set(CMAKE_REQUIRED_QUIET_SAVE ${CMAKE_REQUIRED_QUIET})
+  set(CMAKE_REQUIRED_QUIET ${LibLZMA_FIND_QUIETLY})
+  if(NOT LIBLZMA_LIBRARY_RELEASE AND NOT LIBLZMA_LIBRARY_DEBUG)
+    set(LIBLZMA_LIBRARY_check ${LIBLZMA_LIBRARY})
+  elseif(LIBLZMA_LIBRARY_RELEASE)
+    set(LIBLZMA_LIBRARY_check ${LIBLZMA_LIBRARY_RELEASE})
+  elseif(LIBLZMA_LIBRARY_DEBUG)
+    set(LIBLZMA_LIBRARY_check ${LIBLZMA_LIBRARY_DEBUG})
+  endif()
+  CHECK_LIBRARY_EXISTS(${LIBLZMA_LIBRARY_check} lzma_auto_decoder "" LIBLZMA_HAS_AUTO_DECODER)
+  CHECK_LIBRARY_EXISTS(${LIBLZMA_LIBRARY_check} lzma_easy_encoder "" LIBLZMA_HAS_EASY_ENCODER)
+  CHECK_LIBRARY_EXISTS(${LIBLZMA_LIBRARY_check} lzma_lzma_preset "" LIBLZMA_HAS_LZMA_PRESET)
+  unset(LIBLZMA_LIBRARY_check)
+  set(CMAKE_REQUIRED_QUIET ${CMAKE_REQUIRED_QUIET_SAVE})
+endif ()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+find_package_handle_standard_args(LibLZMA  REQUIRED_VARS  LIBLZMA_LIBRARY
+                                                          LIBLZMA_INCLUDE_DIR
+                                                          LIBLZMA_HAS_AUTO_DECODER
+                                                          LIBLZMA_HAS_EASY_ENCODER
+                                                          LIBLZMA_HAS_LZMA_PRESET
+                                           VERSION_VAR    LIBLZMA_VERSION_STRING
+                                 )
+mark_as_advanced( LIBLZMA_INCLUDE_DIR LIBLZMA_LIBRARY )
+
+if (LIBLZMA_FOUND)
+    set(LIBLZMA_LIBRARIES ${LIBLZMA_LIBRARY})
+    set(LIBLZMA_INCLUDE_DIRS ${LIBLZMA_INCLUDE_DIR})
+    if(NOT TARGET LibLZMA::LibLZMA)
+        add_library(LibLZMA::LibLZMA UNKNOWN IMPORTED)
+        set_target_properties(LibLZMA::LibLZMA PROPERTIES
+                              INTERFACE_INCLUDE_DIRECTORIES ${LIBLZMA_INCLUDE_DIR}
+                              IMPORTED_LINK_INTERFACE_LANGUAGES C)
+
+        if(LIBLZMA_LIBRARY_RELEASE)
+            set_property(TARGET LibLZMA::LibLZMA APPEND PROPERTY
+                IMPORTED_CONFIGURATIONS RELEASE)
+            set_target_properties(LibLZMA::LibLZMA PROPERTIES
+                IMPORTED_LOCATION_RELEASE "${LIBLZMA_LIBRARY_RELEASE}")
+        endif()
+
+        if(LIBLZMA_LIBRARY_DEBUG)
+            set_property(TARGET LibLZMA::LibLZMA APPEND PROPERTY
+                IMPORTED_CONFIGURATIONS DEBUG)
+            set_target_properties(LibLZMA::LibLZMA PROPERTIES
+                IMPORTED_LOCATION_DEBUG "${LIBLZMA_LIBRARY_DEBUG}")
+        endif()
+
+        if(NOT LIBLZMA_LIBRARY_RELEASE AND NOT LIBLZMA_LIBRARY_DEBUG)
+            set_target_properties(LibLZMA::LibLZMA PROPERTIES
+                IMPORTED_LOCATION "${LIBLZMA_LIBRARY}")
+        endif()
+    endif()
+endif ()
diff --git a/cmake-compat/FindPackageHandleStandardArgs.cmake b/cmake-compat/FindPackageHandleStandardArgs.cmake
new file mode 100644
index 0000000..a078049
--- /dev/null
+++ b/cmake-compat/FindPackageHandleStandardArgs.cmake
@@ -0,0 +1,453 @@
+# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
+# file Copyright.txt or https://cmake.org/licensing for details.
+
+#[=======================================================================[.rst:
+FindPackageHandleStandardArgs
+-----------------------------
+
+This module provides a function intended to be used in :ref:`Find Modules`
+implementing :command:`find_package(<PackageName>)` calls.  It handles the
+``REQUIRED``, ``QUIET`` and version-related arguments of ``find_package``.
+It also sets the ``<PackageName>_FOUND`` variable.  The package is
+considered found if all variables listed contain valid results, e.g.
+valid filepaths.
+
+.. command:: find_package_handle_standard_args
+
+  There are two signatures::
+
+    find_package_handle_standard_args(<PackageName>
+      (DEFAULT_MSG|<custom-failure-message>)
+      <required-var>...
+      )
+
+    find_package_handle_standard_args(<PackageName>
+      [FOUND_VAR <result-var>]
+      [REQUIRED_VARS <required-var>...]
+      [VERSION_VAR <version-var>]
+      [HANDLE_COMPONENTS]
+      [CONFIG_MODE]
+      [NAME_MISMATCHED]
+      [REASON_FAILURE_MESSAGE <reason-failure-message>]
+      [FAIL_MESSAGE <custom-failure-message>]
+      )
+
+  The ``<PackageName>_FOUND`` variable will be set to ``TRUE`` if all
+  the variables ``<required-var>...`` are valid and any optional
+  constraints are satisfied, and ``FALSE`` otherwise.  A success or
+  failure message may be displayed based on the results and on
+  whether the ``REQUIRED`` and/or ``QUIET`` option was given to
+  the :command:`find_package` call.
+
+  The options are:
+
+  ``(DEFAULT_MSG|<custom-failure-message>)``
+    In the simple signature this specifies the failure message.
+    Use ``DEFAULT_MSG`` to ask for a default message to be computed
+    (recommended).  Not valid in the full signature.
+
+  ``FOUND_VAR <result-var>``
+    Obsolete.  Specifies either ``<PackageName>_FOUND`` or
+    ``<PACKAGENAME>_FOUND`` as the result variable.  This exists only
+    for compatibility with older versions of CMake and is now ignored.
+    Result variables of both names are always set for compatibility.
+
+  ``REQUIRED_VARS <required-var>...``
+    Specify the variables which are required for this package.
+    These may be named in the generated failure message asking the
+    user to set the missing variable values.  Therefore these should
+    typically be cache entries such as ``FOO_LIBRARY`` and not output
+    variables like ``FOO_LIBRARIES``.
+
+  ``VERSION_VAR <version-var>``
+    Specify the name of a variable that holds the version of the package
+    that has been found.  This version will be checked against the
+    (potentially) specified required version given to the
+    :command:`find_package` call, including its ``EXACT`` option.
+    The default messages include information about the required
+    version and the version which has been actually found, both
+    if the version is ok or not.
+
+  ``HANDLE_COMPONENTS``
+    Enable handling of package components.  In this case, the command
+    will report which components have been found and which are missing,
+    and the ``<PackageName>_FOUND`` variable will be set to ``FALSE``
+    if any of the required components (i.e. not the ones listed after
+    the ``OPTIONAL_COMPONENTS`` option of :command:`find_package`) are
+    missing.
+
+  ``CONFIG_MODE``
+    Specify that the calling find module is a wrapper around a
+    call to ``find_package(<PackageName> NO_MODULE)``.  This implies
+    a ``VERSION_VAR`` value of ``<PackageName>_VERSION``.  The command
+    will automatically check whether the package configuration file
+    was found.
+
+  ``REASON_FAILURE_MESSAGE <reason-failure-message>``
+    Specify a custom message of the reason for the failure which will be
+    appended to the default generated message.
+
+  ``FAIL_MESSAGE <custom-failure-message>``
+    Specify a custom failure message instead of using the default
+    generated message.  Not recommended.
+
+  ``NAME_MISMATCHED``
+    Indicate that the ``<PackageName>`` does not match
+    ``${CMAKE_FIND_PACKAGE_NAME}``. This is usually a mistake and raises a
+    warning, but it may be intentional for usage of the command for components
+    of a larger package.
+
+Example for the simple signature:
+
+.. code-block:: cmake
+
+  find_package_handle_standard_args(LibXml2 DEFAULT_MSG
+    LIBXML2_LIBRARY LIBXML2_INCLUDE_DIR)
+
+The ``LibXml2`` package is considered to be found if both
+``LIBXML2_LIBRARY`` and ``LIBXML2_INCLUDE_DIR`` are valid.
+Then also ``LibXml2_FOUND`` is set to ``TRUE``.  If it is not found
+and ``REQUIRED`` was used, it fails with a
+:command:`message(FATAL_ERROR)`, independent whether ``QUIET`` was
+used or not.  If it is found, success will be reported, including
+the content of the first ``<required-var>``.  On repeated CMake runs,
+the same message will not be printed again.
+
+.. note::
+
+  If ``<PackageName>`` does not match ``CMAKE_FIND_PACKAGE_NAME`` for the
+  calling module, a warning that there is a mismatch is given. The
+  ``FPHSA_NAME_MISMATCHED`` variable may be set to bypass the warning if using
+  the old signature and the ``NAME_MISMATCHED`` argument using the new
+  signature. To avoid forcing the caller to require newer versions of CMake for
+  usage, the variable's value will be used if defined when the
+  ``NAME_MISMATCHED`` argument is not passed for the new signature (but using
+  both is an error)..
+
+Example for the full signature:
+
+.. code-block:: cmake
+
+  find_package_handle_standard_args(LibArchive
+    REQUIRED_VARS LibArchive_LIBRARY LibArchive_INCLUDE_DIR
+    VERSION_VAR LibArchive_VERSION)
+
+In this case, the ``LibArchive`` package is considered to be found if
+both ``LibArchive_LIBRARY`` and ``LibArchive_INCLUDE_DIR`` are valid.
+Also the version of ``LibArchive`` will be checked by using the version
+contained in ``LibArchive_VERSION``.  Since no ``FAIL_MESSAGE`` is given,
+the default messages will be printed.
+
+Another example for the full signature:
+
+.. code-block:: cmake
+
+  find_package(Automoc4 QUIET NO_MODULE HINTS /opt/automoc4)
+  find_package_handle_standard_args(Automoc4  CONFIG_MODE)
+
+In this case, a ``FindAutmoc4.cmake`` module wraps a call to
+``find_package(Automoc4 NO_MODULE)`` and adds an additional search
+directory for ``automoc4``.  Then the call to
+``find_package_handle_standard_args`` produces a proper success/failure
+message.
+#]=======================================================================]
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageMessage.cmake)
+
+# internal helper macro
+macro(_FPHSA_FAILURE_MESSAGE _msg)
+  set (__msg "${_msg}")
+  if (FPHSA_REASON_FAILURE_MESSAGE)
+    string(APPEND __msg "\n    Reason given by package: ${FPHSA_REASON_FAILURE_MESSAGE}\n")
+  endif()
+  if (${_NAME}_FIND_REQUIRED)
+    message(FATAL_ERROR "${__msg}")
+  else ()
+    if (NOT ${_NAME}_FIND_QUIETLY)
+      message(STATUS "${__msg}")
+    endif ()
+  endif ()
+endmacro()
+
+
+# internal helper macro to generate the failure message when used in CONFIG_MODE:
+macro(_FPHSA_HANDLE_FAILURE_CONFIG_MODE)
+  # <PackageName>_CONFIG is set, but FOUND is false, this means that some other of the REQUIRED_VARS was not found:
+  if(${_NAME}_CONFIG)
+    _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: missing:${MISSING_VARS} (found ${${_NAME}_CONFIG} ${VERSION_MSG})")
+  else()
+    # If _CONSIDERED_CONFIGS is set, the config-file has been found, but no suitable version.
+    # List them all in the error message:
+    if(${_NAME}_CONSIDERED_CONFIGS)
+      set(configsText "")
+      list(LENGTH ${_NAME}_CONSIDERED_CONFIGS configsCount)
+      math(EXPR configsCount "${configsCount} - 1")
+      foreach(currentConfigIndex RANGE ${configsCount})
+        list(GET ${_NAME}_CONSIDERED_CONFIGS ${currentConfigIndex} filename)
+        list(GET ${_NAME}_CONSIDERED_VERSIONS ${currentConfigIndex} version)
+        string(APPEND configsText "\n    ${filename} (version ${version})")
+      endforeach()
+      if (${_NAME}_NOT_FOUND_MESSAGE)
+        if (FPHSA_REASON_FAILURE_MESSAGE)
+          string(PREPEND FPHSA_REASON_FAILURE_MESSAGE "${${_NAME}_NOT_FOUND_MESSAGE}\n    ")
+        else()
+          set(FPHSA_REASON_FAILURE_MESSAGE "${${_NAME}_NOT_FOUND_MESSAGE}")
+        endif()
+      else()
+        string(APPEND configsText "\n")
+      endif()
+      _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE} ${VERSION_MSG}, checked the following files:${configsText}")
+
+    else()
+      # Simple case: No Config-file was found at all:
+      _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: found neither ${_NAME}Config.cmake nor ${_NAME_LOWER}-config.cmake ${VERSION_MSG}")
+    endif()
+  endif()
+endmacro()
+
+
+function(FIND_PACKAGE_HANDLE_STANDARD_ARGS _NAME _FIRST_ARG)
+
+  # Set up the arguments for `cmake_parse_arguments`.
+  set(options  CONFIG_MODE  HANDLE_COMPONENTS NAME_MISMATCHED)
+  set(oneValueArgs  FAIL_MESSAGE  REASON_FAILURE_MESSAGE VERSION_VAR  FOUND_VAR)
+  set(multiValueArgs REQUIRED_VARS)
+
+  # Check whether we are in 'simple' or 'extended' mode:
+  set(_KEYWORDS_FOR_EXTENDED_MODE  ${options} ${oneValueArgs} ${multiValueArgs} )
+  list(FIND _KEYWORDS_FOR_EXTENDED_MODE "${_FIRST_ARG}" INDEX)
+
+  unset(FPHSA_NAME_MISMATCHED_override)
+  if (DEFINED FPHSA_NAME_MISMATCHED)
+    # If the variable NAME_MISMATCHED variable is set, error if it is passed as
+    # an argument. The former is for old signatures, the latter is for new
+    # signatures.
+    list(FIND ARGN "NAME_MISMATCHED" name_mismatched_idx)
+    if (NOT name_mismatched_idx EQUAL "-1")
+      message(FATAL_ERROR
+        "The `NAME_MISMATCHED` argument may only be specified by the argument or "
+        "the variable, not both.")
+    endif ()
+
+    # But use the variable if it is not an argument to avoid forcing minimum
+    # CMake version bumps for calling modules.
+    set(FPHSA_NAME_MISMATCHED_override "${FPHSA_NAME_MISMATCHED}")
+  endif ()
+
+  if(${INDEX} EQUAL -1)
+    set(FPHSA_FAIL_MESSAGE ${_FIRST_ARG})
+    set(FPHSA_REQUIRED_VARS ${ARGN})
+    set(FPHSA_VERSION_VAR)
+  else()
+    cmake_parse_arguments(FPHSA "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${_FIRST_ARG} ${ARGN})
+
+    if(FPHSA_UNPARSED_ARGUMENTS)
+      message(FATAL_ERROR "Unknown keywords given to FIND_PACKAGE_HANDLE_STANDARD_ARGS(): \"${FPHSA_UNPARSED_ARGUMENTS}\"")
+    endif()
+
+    if(NOT FPHSA_FAIL_MESSAGE)
+      set(FPHSA_FAIL_MESSAGE  "DEFAULT_MSG")
+    endif()
+
+    # In config-mode, we rely on the variable <PackageName>_CONFIG, which is set by find_package()
+    # when it successfully found the config-file, including version checking:
+    if(FPHSA_CONFIG_MODE)
+      list(INSERT FPHSA_REQUIRED_VARS 0 ${_NAME}_CONFIG)
+      list(REMOVE_DUPLICATES FPHSA_REQUIRED_VARS)
+      set(FPHSA_VERSION_VAR ${_NAME}_VERSION)
+    endif()
+
+    if(NOT FPHSA_REQUIRED_VARS)
+      message(FATAL_ERROR "No REQUIRED_VARS specified for FIND_PACKAGE_HANDLE_STANDARD_ARGS()")
+    endif()
+  endif()
+
+  if (DEFINED FPHSA_NAME_MISMATCHED_override)
+    set(FPHSA_NAME_MISMATCHED "${FPHSA_NAME_MISMATCHED_override}")
+  endif ()
+
+  if (DEFINED CMAKE_FIND_PACKAGE_NAME
+      AND NOT FPHSA_NAME_MISMATCHED
+      AND NOT _NAME STREQUAL CMAKE_FIND_PACKAGE_NAME)
+    message(AUTHOR_WARNING
+      "The package name passed to `find_package_handle_standard_args` "
+      "(${_NAME}) does not match the name of the calling package "
+      "(${CMAKE_FIND_PACKAGE_NAME}). This can lead to problems in calling "
+      "code that expects `find_package` result variables (e.g., `_FOUND`) "
+      "to follow a certain pattern.")
+  endif ()
+
+# now that we collected all arguments, process them
+
+  if("x${FPHSA_FAIL_MESSAGE}" STREQUAL "xDEFAULT_MSG")
+    set(FPHSA_FAIL_MESSAGE "Could NOT find ${_NAME}")
+  endif()
+
+  list(GET FPHSA_REQUIRED_VARS 0 _FIRST_REQUIRED_VAR)
+
+  string(TOUPPER ${_NAME} _NAME_UPPER)
+  string(TOLOWER ${_NAME} _NAME_LOWER)
+
+  if(FPHSA_FOUND_VAR)
+    set(_FOUND_VAR_UPPER ${_NAME_UPPER}_FOUND)
+    set(_FOUND_VAR_MIXED ${_NAME}_FOUND)
+    if(FPHSA_FOUND_VAR STREQUAL _FOUND_VAR_MIXED  OR  FPHSA_FOUND_VAR STREQUAL _FOUND_VAR_UPPER)
+      set(_FOUND_VAR ${FPHSA_FOUND_VAR})
+    else()
+      message(FATAL_ERROR "The argument for FOUND_VAR is \"${FPHSA_FOUND_VAR}\", but only \"${_FOUND_VAR_MIXED}\" and \"${_FOUND_VAR_UPPER}\" are valid names.")
+    endif()
+  else()
+    set(_FOUND_VAR ${_NAME_UPPER}_FOUND)
+  endif()
+
+  # collect all variables which were not found, so they can be printed, so the
+  # user knows better what went wrong (#6375)
+  set(MISSING_VARS "")
+  set(DETAILS "")
+  # check if all passed variables are valid
+  set(FPHSA_FOUND_${_NAME} TRUE)
+  foreach(_CURRENT_VAR ${FPHSA_REQUIRED_VARS})
+    if(NOT ${_CURRENT_VAR})
+      set(FPHSA_FOUND_${_NAME} FALSE)
+      string(APPEND MISSING_VARS " ${_CURRENT_VAR}")
+    else()
+      string(APPEND DETAILS "[${${_CURRENT_VAR}}]")
+    endif()
+  endforeach()
+  if(FPHSA_FOUND_${_NAME})
+    set(${_NAME}_FOUND TRUE)
+    set(${_NAME_UPPER}_FOUND TRUE)
+  else()
+    set(${_NAME}_FOUND FALSE)
+    set(${_NAME_UPPER}_FOUND FALSE)
+  endif()
+
+  # component handling
+  unset(FOUND_COMPONENTS_MSG)
+  unset(MISSING_COMPONENTS_MSG)
+
+  if(FPHSA_HANDLE_COMPONENTS)
+    foreach(comp ${${_NAME}_FIND_COMPONENTS})
+      if(${_NAME}_${comp}_FOUND)
+
+        if(NOT DEFINED FOUND_COMPONENTS_MSG)
+          set(FOUND_COMPONENTS_MSG "found components:")
+        endif()
+        string(APPEND FOUND_COMPONENTS_MSG " ${comp}")
+
+      else()
+
+        if(NOT DEFINED MISSING_COMPONENTS_MSG)
+          set(MISSING_COMPONENTS_MSG "missing components:")
+        endif()
+        string(APPEND MISSING_COMPONENTS_MSG " ${comp}")
+
+        if(${_NAME}_FIND_REQUIRED_${comp})
+          set(${_NAME}_FOUND FALSE)
+          string(APPEND MISSING_VARS " ${comp}")
+        endif()
+
+      endif()
+    endforeach()
+    set(COMPONENT_MSG "${FOUND_COMPONENTS_MSG} ${MISSING_COMPONENTS_MSG}")
+    string(APPEND DETAILS "[c${COMPONENT_MSG}]")
+  endif()
+
+  # version handling:
+  set(VERSION_MSG "")
+  set(VERSION_OK TRUE)
+
+  # check with DEFINED here as the requested or found version may be "0"
+  if (DEFINED ${_NAME}_FIND_VERSION)
+    if(DEFINED ${FPHSA_VERSION_VAR})
+      set(_FOUND_VERSION ${${FPHSA_VERSION_VAR}})
+
+      if(${_NAME}_FIND_VERSION_EXACT)       # exact version required
+        # count the dots in the version string
+        string(REGEX REPLACE "[^.]" "" _VERSION_DOTS "${_FOUND_VERSION}")
+        # add one dot because there is one dot more than there are components
+        string(LENGTH "${_VERSION_DOTS}." _VERSION_DOTS)
+        if (_VERSION_DOTS GREATER ${_NAME}_FIND_VERSION_COUNT)
+          # Because of the C++ implementation of find_package() ${_NAME}_FIND_VERSION_COUNT
+          # is at most 4 here. Therefore a simple lookup table is used.
+          if (${_NAME}_FIND_VERSION_COUNT EQUAL 1)
+            set(_VERSION_REGEX "[^.]*")
+          elseif (${_NAME}_FIND_VERSION_COUNT EQUAL 2)
+            set(_VERSION_REGEX "[^.]*\\.[^.]*")
+          elseif (${_NAME}_FIND_VERSION_COUNT EQUAL 3)
+            set(_VERSION_REGEX "[^.]*\\.[^.]*\\.[^.]*")
+          else ()
+            set(_VERSION_REGEX "[^.]*\\.[^.]*\\.[^.]*\\.[^.]*")
+          endif ()
+          string(REGEX REPLACE "^(${_VERSION_REGEX})\\..*" "\\1" _VERSION_HEAD "${_FOUND_VERSION}")
+          unset(_VERSION_REGEX)
+          if (NOT ${_NAME}_FIND_VERSION VERSION_EQUAL _VERSION_HEAD)
+            set(VERSION_MSG "Found unsuitable version \"${_FOUND_VERSION}\", but required is exact version \"${${_NAME}_FIND_VERSION}\"")
+            set(VERSION_OK FALSE)
+          else ()
+            set(VERSION_MSG "(found suitable exact version \"${_FOUND_VERSION}\")")
+          endif ()
+          unset(_VERSION_HEAD)
+        else ()
+          if (NOT ${_NAME}_FIND_VERSION VERSION_EQUAL _FOUND_VERSION)
+            set(VERSION_MSG "Found unsuitable version \"${_FOUND_VERSION}\", but required is exact version \"${${_NAME}_FIND_VERSION}\"")
+            set(VERSION_OK FALSE)
+          else ()
+            set(VERSION_MSG "(found suitable exact version \"${_FOUND_VERSION}\")")
+          endif ()
+        endif ()
+        unset(_VERSION_DOTS)
+
+      else()     # minimum version specified:
+        if (${_NAME}_FIND_VERSION VERSION_GREATER _FOUND_VERSION)
+          set(VERSION_MSG "Found unsuitable version \"${_FOUND_VERSION}\", but required is at least \"${${_NAME}_FIND_VERSION}\"")
+          set(VERSION_OK FALSE)
+        else ()
+          set(VERSION_MSG "(found suitable version \"${_FOUND_VERSION}\", minimum required is \"${${_NAME}_FIND_VERSION}\")")
+        endif ()
+      endif()
+
+    else()
+
+      # if the package was not found, but a version was given, add that to the output:
+      if(${_NAME}_FIND_VERSION_EXACT)
+         set(VERSION_MSG "(Required is exact version \"${${_NAME}_FIND_VERSION}\")")
+      else()
+         set(VERSION_MSG "(Required is at least version \"${${_NAME}_FIND_VERSION}\")")
+      endif()
+
+    endif()
+  else ()
+    # Check with DEFINED as the found version may be 0.
+    if(DEFINED ${FPHSA_VERSION_VAR})
+      set(VERSION_MSG "(found version \"${${FPHSA_VERSION_VAR}}\")")
+    endif()
+  endif ()
+
+  if(VERSION_OK)
+    string(APPEND DETAILS "[v${${FPHSA_VERSION_VAR}}(${${_NAME}_FIND_VERSION})]")
+  else()
+    set(${_NAME}_FOUND FALSE)
+  endif()
+
+
+  # print the result:
+  if (${_NAME}_FOUND)
+    FIND_PACKAGE_MESSAGE(${_NAME} "Found ${_NAME}: ${${_FIRST_REQUIRED_VAR}} ${VERSION_MSG} ${COMPONENT_MSG}" "${DETAILS}")
+  else ()
+
+    if(FPHSA_CONFIG_MODE)
+      _FPHSA_HANDLE_FAILURE_CONFIG_MODE()
+    else()
+      if(NOT VERSION_OK)
+        _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: ${VERSION_MSG} (found ${${_FIRST_REQUIRED_VAR}})")
+      else()
+        _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE} (missing:${MISSING_VARS}) ${VERSION_MSG}")
+      endif()
+    endif()
+
+  endif ()
+
+  set(${_NAME}_FOUND ${${_NAME}_FOUND} PARENT_SCOPE)
+  set(${_NAME_UPPER}_FOUND ${${_NAME}_FOUND} PARENT_SCOPE)
+endfunction()
diff --git a/cmake-compat/FindPackageMessage.cmake b/cmake-compat/FindPackageMessage.cmake
new file mode 100644
index 0000000..0628b98
--- /dev/null
+++ b/cmake-compat/FindPackageMessage.cmake
@@ -0,0 +1,48 @@
+# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
+# file Copyright.txt or https://cmake.org/licensing for details.
+
+#[=======================================================================[.rst:
+FindPackageMessage
+------------------
+
+.. code-block:: cmake
+
+  find_package_message(<name> "message for user" "find result details")
+
+This function is intended to be used in FindXXX.cmake modules files.
+It will print a message once for each unique find result.  This is
+useful for telling the user where a package was found.  The first
+argument specifies the name (XXX) of the package.  The second argument
+specifies the message to display.  The third argument lists details
+about the find result so that if they change the message will be
+displayed again.  The macro also obeys the QUIET argument to the
+find_package command.
+
+Example:
+
+.. code-block:: cmake
+
+  if(X11_FOUND)
+    find_package_message(X11 "Found X11: ${X11_X11_LIB}"
+      "[${X11_X11_LIB}][${X11_INCLUDE_DIR}]")
+  else()
+   ...
+  endif()
+#]=======================================================================]
+
+function(find_package_message pkg msg details)
+  # Avoid printing a message repeatedly for the same find result.
+  if(NOT ${pkg}_FIND_QUIETLY)
+    string(REPLACE "\n" "" details "${details}")
+    set(DETAILS_VAR FIND_PACKAGE_MESSAGE_DETAILS_${pkg})
+    if(NOT "${details}" STREQUAL "${${DETAILS_VAR}}")
+      # The message has not yet been printed.
+      message(STATUS "${msg}")
+
+      # Save the find details in the cache to avoid printing the same
+      # message again.
+      set("${DETAILS_VAR}" "${details}"
+        CACHE INTERNAL "Details about finding ${pkg}")
+    endif()
+  endif()
+endfunction()
diff --git a/cmake-compat/SelectLibraryConfigurations.cmake b/cmake-compat/SelectLibraryConfigurations.cmake
new file mode 100644
index 0000000..4c0e9a8
--- /dev/null
+++ b/cmake-compat/SelectLibraryConfigurations.cmake
@@ -0,0 +1,80 @@
+# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
+# file Copyright.txt or https://cmake.org/licensing for details.
+
+#[=======================================================================[.rst:
+SelectLibraryConfigurations
+---------------------------
+
+.. code-block:: cmake
+
+  select_library_configurations(basename)
+
+This macro takes a library base name as an argument, and will choose
+good values for the variables
+
+::
+
+  basename_LIBRARY
+  basename_LIBRARIES
+  basename_LIBRARY_DEBUG
+  basename_LIBRARY_RELEASE
+
+depending on what has been found and set.
+
+If only ``basename_LIBRARY_RELEASE`` is defined, ``basename_LIBRARY`` will
+be set to the release value, and ``basename_LIBRARY_DEBUG`` will be set
+to ``basename_LIBRARY_DEBUG-NOTFOUND``.  If only ``basename_LIBRARY_DEBUG``
+is defined, then ``basename_LIBRARY`` will take the debug value, and
+``basename_LIBRARY_RELEASE`` will be set to ``basename_LIBRARY_RELEASE-NOTFOUND``.
+
+If the generator supports configuration types, then ``basename_LIBRARY``
+and ``basename_LIBRARIES`` will be set with debug and optimized flags
+specifying the library to be used for the given configuration.  If no
+build type has been set or the generator in use does not support
+configuration types, then ``basename_LIBRARY`` and ``basename_LIBRARIES``
+will take only the release value, or the debug value if the release one
+is not set.
+#]=======================================================================]
+
+# This macro was adapted from the FindQt4 CMake module and is maintained by Will
+# Dicharry <wdicharry@stellarscience.com>.
+
+macro(select_library_configurations basename)
+    if(NOT ${basename}_LIBRARY_RELEASE)
+        set(${basename}_LIBRARY_RELEASE "${basename}_LIBRARY_RELEASE-NOTFOUND" CACHE FILEPATH "Path to a library.")
+    endif()
+    if(NOT ${basename}_LIBRARY_DEBUG)
+        set(${basename}_LIBRARY_DEBUG "${basename}_LIBRARY_DEBUG-NOTFOUND" CACHE FILEPATH "Path to a library.")
+    endif()
+
+    get_property(_isMultiConfig GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
+    if( ${basename}_LIBRARY_DEBUG AND ${basename}_LIBRARY_RELEASE AND
+           NOT ${basename}_LIBRARY_DEBUG STREQUAL ${basename}_LIBRARY_RELEASE AND
+           ( _isMultiConfig OR CMAKE_BUILD_TYPE ) )
+        # if the generator is multi-config or if CMAKE_BUILD_TYPE is set for
+        # single-config generators, set optimized and debug libraries
+        set( ${basename}_LIBRARY "" )
+        foreach( _libname IN LISTS ${basename}_LIBRARY_RELEASE )
+            list( APPEND ${basename}_LIBRARY optimized "${_libname}" )
+        endforeach()
+        foreach( _libname IN LISTS ${basename}_LIBRARY_DEBUG )
+            list( APPEND ${basename}_LIBRARY debug "${_libname}" )
+        endforeach()
+    elseif( ${basename}_LIBRARY_RELEASE )
+        set( ${basename}_LIBRARY ${${basename}_LIBRARY_RELEASE} )
+    elseif( ${basename}_LIBRARY_DEBUG )
+        set( ${basename}_LIBRARY ${${basename}_LIBRARY_DEBUG} )
+    else()
+        set( ${basename}_LIBRARY "${basename}_LIBRARY-NOTFOUND")
+    endif()
+
+    set( ${basename}_LIBRARIES "${${basename}_LIBRARY}" )
+
+    if( ${basename}_LIBRARY )
+        set( ${basename}_FOUND TRUE )
+    endif()
+
+    mark_as_advanced( ${basename}_LIBRARY_RELEASE
+        ${basename}_LIBRARY_DEBUG
+    )
+endmacro()