| INSTALLATION ON THE UNIX PLATFORM | |
| --------------------------------- | |
| [Installation on DOS (with djgpp), Windows, MacOS (before MacOS X) | |
| and NetWare is described in INSTALL.DJGPP, INSTALL.MacOS | |
| and INSTALL.NW. | |
| This document describes installation on the main supported operating | |
| systems, currently the Unix family and OpenVMS.] | |
| To install OpenSSL, you will need: | |
| * make | |
| * Perl 5 with core modules (please read README.PERL) | |
| * The perl module Text::Template (please read README.PERL) | |
| * an ANSI C compiler | |
| * a development environment in form of development libraries and C | |
| header files | |
| * a supported operating system | |
| For more details regarding specific platforms, there are these notes | |
| available: | |
| * NOTES.VMS (OpenVMS) | |
| * NOTES.WIN (any Windows except for Windows CE) | |
| Quick Start | |
| ----------- | |
| If you want to just get on with it, do: | |
| on Unix: | |
| $ ./config | |
| $ make | |
| $ make test | |
| $ make install | |
| on OpenVMS: | |
| $ @config | |
| $ mms | |
| $ mms test | |
| $ mms install | |
| on Windows (only pick one of the targets for configuration): | |
| $ perl Configure { VC-WIN32 | VC-WIN64A | VC-WIN64I | VC-CE } | |
| $ nmake | |
| $ nmake test | |
| [If any of these steps fails, see section Installation in Detail below.] | |
| This will build and install OpenSSL in the default location, which is: | |
| Unix: normal installation directories under /usr/local | |
| OpenVMS: SYS$COMMON:[OPENSSL-'version'...], where 'version' is the | |
| OpenSSL version number ('major'_'minor'). | |
| Windows: currently don't have an install function <TBA> | |
| If you want to install it anywhere else, run config like this: | |
| On Unix: | |
| $ ./config --prefix=/opt/openssl --openssldir=/usr/local/ssl | |
| On OpenVMS: | |
| $ @config --prefix=PROGRAM:[INSTALLS] --openssldir=SYS$MANAGER:[OPENSSL] | |
| Configuration Options | |
| --------------------- | |
| There are several options to ./config (or ./Configure) to customize | |
| the build: | |
| --prefix=DIR The top of the installation directory tree. Defaults are: | |
| Unix: /usr/local | |
| OpenVMS: SYS$COMMON:[OPENSSL-'version'] | |
| --openssldir=DIR Directory for OpenSSL configuration files, and also the | |
| default certificate and key store. Defaults are: | |
| Unix: PREFIX/ssl (PREFIX is given by --prefix) | |
| OpenVMS: SYS$COMMON:[SSL] | |
| no-autoalginit Don't automatically load all supported ciphers and digests. | |
| Typically OpenSSL will make available all of its supported | |
| ciphers and digests. For a statically linked application this | |
| may be undesirable if small executable size is an objective. | |
| This only affects libcrypto. Ciphers and digests will have to be | |
| loaded manually using EVP_add_cipher() and EVP_add_digest() if | |
| this option is used. | |
| no-autoerrinit Don't automatically load all libcrypto/libssl error strings. | |
| Typically OpenSSL will automatically load human readable error | |
| strings. For a statically linked application this may be | |
| undesirable if small executable size is an objective. | |
| no-threads Don't try to build with support for multi-threaded | |
| applications. | |
| threads Build with support for multi-threaded applications. | |
| This will usually require additional system-dependent options! | |
| See "Note on multi-threading" below. | |
| no-zlib Don't try to build with support for zlib compression and | |
| decompression. | |
| zlib Build with support for zlib compression/decompression. | |
| zlib-dynamic Like "zlib", but has OpenSSL load the zlib library dynamically | |
| when needed. This is only supported on systems where loading | |
| of shared libraries is supported. This is the default choice. | |
| no-shared Don't try to create shared libraries. | |
| shared In addition to the usual static libraries, create shared | |
| libraries on platforms where it's supported. See "Note on | |
| shared libraries" below. | |
| no-asm Do not use assembler code. | |
| 386 On Intel hardware, use the 80386 instruction set only | |
| (the default x86 code is more efficient, but requires at | |
| least a 486). Note: Use compiler flags for any other CPU | |
| specific configuration, e.g. "-m32" to build x86 code on | |
| an x64 system. | |
| no-sse2 Exclude SSE2 code pathes. Normally SSE2 extension is | |
| detected at run-time, but the decision whether or not the | |
| machine code will be executed is taken solely on CPU | |
| capability vector. This means that if you happen to run OS | |
| kernel which does not support SSE2 extension on Intel P4 | |
| processor, then your application might be exposed to | |
| "illegal instruction" exception. There might be a way | |
| to enable support in kernel, e.g. FreeBSD kernel can be | |
| compiled with CPU_ENABLE_SSE, and there is a way to | |
| disengage SSE2 code pathes upon application start-up, | |
| but if you aim for wider "audience" running such kernel, | |
| consider no-sse2. Both 386 and no-asm options above imply | |
| no-sse2. | |
| no-<cipher> Build without the specified cipher (bf, cast, des, dh, dsa, | |
| hmac, md2, md5, mdc2, rc2, rc4, rc5, rsa, sha). | |
| The crypto/<cipher> directory can be removed after running | |
| "make depend". | |
| -Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx These system specific options will | |
| be passed through to the compiler to allow you to | |
| define preprocessor symbols, specify additional libraries, | |
| library directories or other compiler options. | |
| Installation in Detail | |
| ---------------------- | |
| 1a. Configure OpenSSL for your operation system automatically: | |
| NOTE: This is not available on Windows. | |
| $ ./config [options] # Unix | |
| or | |
| $ @config [options] ! OpenVMS | |
| For the remainder of this text, the Unix form will be used in all | |
| examples, please use the appropriate form for your platform. | |
| This guesses at your operating system (and compiler, if necessary) and | |
| configures OpenSSL based on this guess. Run ./config -t to see | |
| if it guessed correctly. If you want to use a different compiler, you | |
| are cross-compiling for another platform, or the ./config guess was | |
| wrong for other reasons, go to step 1b. Otherwise go to step 2. | |
| On some systems, you can include debugging information as follows: | |
| $ ./config -d [options] | |
| 1b. Configure OpenSSL for your operating system manually | |
| OpenSSL knows about a range of different operating system, hardware and | |
| compiler combinations. To see the ones it knows about, run | |
| $ ./Configure # Unix | |
| or | |
| $ perl Configure # All other platforms | |
| For the remainder of this text, the Unix form will be used in all | |
| examples, please use the appropriate form for your platform. | |
| Pick a suitable name from the list that matches your system. For most | |
| operating systems there is a choice between using "cc" or "gcc". When | |
| you have identified your system (and if necessary compiler) use this name | |
| as the argument to Configure. For example, a "linux-elf" user would | |
| run: | |
| $ ./Configure linux-elf [options] | |
| If your system isn't listed, you will have to create a configuration | |
| file named Configurations/{something}.conf and add the correct | |
| configuration for your system. See the available configs as examples | |
| and read Configurations/README and Configurations/README.design for | |
| more information. | |
| The generic configurations "cc" or "gcc" should usually work on 32 bit | |
| Unix-like systems. | |
| Configure creates a build file ("Makefile" on Unix and "descrip.mms" | |
| on OpenVMS) from a suitable template in Configurations, and | |
| defines various macros in crypto/opensslconf.h (generated from | |
| crypto/opensslconf.h.in). | |
| 1c. Configure OpenSSL for building outside of the source tree. | |
| OpenSSL can be configured to build in a build directory separate from | |
| the directory with the source code. It's done by placing yourself in | |
| some other directory and invoking the configuration commands from | |
| there. | |
| Unix example: | |
| $ mkdir /var/tmp/openssl-build | |
| $ cd /var/tmp/openssl-build | |
| $ /PATH/TO/OPENSSL/SOURCE/config [options] | |
| or | |
| $ /PATH/TO/OPENSSL/SOURCE/Configure [target] [options] | |
| OpenVMS example: | |
| $ set default sys$login: | |
| $ create/dir [.tmp.openssl-build] | |
| $ set default [.tmp.openssl-build] | |
| $ @[PATH.TO.OPENSSL.SOURCE]config {options} | |
| or | |
| $ @[PATH.TO.OPENSSL.SOURCE]Configure {target} {options} | |
| Windows example: | |
| $ C: | |
| $ mkdir \temp-openssl | |
| $ cd \temp-openssl | |
| $ perl d:\PATH\TO\OPENSSL\SOURCE\Configure {target} {options} | |
| Paths can be relative just as well as absolute. Configure will | |
| do its best to translate them to relative paths whenever possible. | |
| 2. Build OpenSSL by running: | |
| $ make # Unix | |
| $ mms ! (or mmk) OpenVMS | |
| $ nmake # Windows | |
| This will build the OpenSSL libraries (libcrypto.a and libssl.a on | |
| Unix, corresponding on other platforms) and the OpenSSL binary | |
| ("openssl"). The libraries will be built in the top-level directory, | |
| and the binary will be in the "apps" subdirectory. | |
| If the build fails, look at the output. There may be reasons for | |
| the failure that aren't problems in OpenSSL itself (like missing | |
| standard headers). If it is a problem with OpenSSL itself, please | |
| report the problem to <rt@openssl.org> (note that your message | |
| will be recorded in the request tracker publicly readable at | |
| https://www.openssl.org/community/index.html#bugs and will be | |
| forwarded to a public mailing list). Include the output of "make | |
| report" in your message. Please check out the request tracker. Maybe | |
| the bug was already reported or has already been fixed. | |
| [If you encounter assembler error messages, try the "no-asm" | |
| configuration option as an immediate fix.] | |
| Compiling parts of OpenSSL with gcc and others with the system | |
| compiler will result in unresolved symbols on some systems. | |
| 3. After a successful build, the libraries should be tested. Run: | |
| $ make test # Unix | |
| $ mms test ! OpenVMS | |
| $ nmake test # Windows | |
| If some tests fail, look at the output. There may be reasons for | |
| the failure that isn't a problem in OpenSSL itself (like a | |
| malfunction with Perl). You may want increased verbosity, that | |
| can be accomplished like this: | |
| $ HARNESS_VERBOSE=yes make test # Unix | |
| $ DEFINE HARNESS_VERBOSE YES | |
| $ mms test ! OpenVMS | |
| $ set HARNESS_VERBOSE=yes | |
| $ nmake test # Windows | |
| If you want to run just one or a few specific tests, you can use | |
| the make variable TESTS to specify them, like this: | |
| $ make TESTS='test_rsa test_dsa' test # Unix | |
| $ mms/macro="TESTS=test_rsa test_dsa" test ! OpenVMS | |
| $ nmake TESTS='test_rsa test_dsa' test # Windows | |
| And of course, you can combine (Unix example shown): | |
| $ HARNESS_VERBOSE=yes make TESTS='test_rsa test_dsa' test | |
| You can find the list of available tests like this: | |
| $ make list-tests # Unix | |
| $ mms list-tests ! OpenVMS | |
| $ nmake list-tests # Windows | |
| Have a look at the manual for the perl module Test::Harness to | |
| see what other HARNESS_* variables there are. | |
| If you find a problem with OpenSSL itself, try removing any | |
| compiler optimization flags from the CFLAGS line in Makefile and | |
| run "make clean; make" or corresponding. | |
| Please send a bug report to <openssl-bugs@openssl.org>, and when | |
| you do, please run the following and include the output in your | |
| report: | |
| $ make report | |
| 4. If everything tests ok, install OpenSSL with | |
| $ make install # Unix | |
| $ mms install ! OpenVMS | |
| This will install all the software components in this directory | |
| tree under PREFIX (the directory given with --prefix or its | |
| default): | |
| Unix: | |
| bin/ Contains the openssl binary and a few other | |
| utility scripts. | |
| include/openssl | |
| Contains the header files needed if you want | |
| to build your own programs that use libcrypto | |
| or libssl. | |
| lib Contains the OpenSSL library files. | |
| lib/engines Contains the OpenSSL dynamically loadable engines. | |
| share/man/{man1,man3,man5,man7} | |
| Contains the OpenSSL man-pages. | |
| share/doc/openssl/html{man1,man3,man5,man7} | |
| Contains the HTML rendition of the man-pages. | |
| OpenVMS ('arch' is replaced with the architecture name, "Alpha" | |
| or "ia64"): | |
| [.EXE.'arch'] Contains the openssl binary and a few other | |
| utility scripts. | |
| [.include.openssl] | |
| Contains the header files needed if you want | |
| to build your own programs that use libcrypto | |
| or libssl. | |
| [.LIB.'arch'] Contains the OpenSSL library files. | |
| [.ENGINES.'arch'] | |
| Contains the OpenSSL dynamically loadable engines. | |
| [.SYS$STARTUP] Contains startup, login and shutdown scripts. | |
| These define appropriate logical names and | |
| command symbols. | |
| Additionally, install will add the following directories under | |
| OPENSSLDIR (the directory given with --openssldir or its default) | |
| for you convenience: | |
| certs Initially empty, this is the default location | |
| for certificate files. | |
| private Initially empty, this is the default location | |
| for private key files. | |
| misc Various scripts. | |
| Package builders who want to configure the library for standard | |
| locations, but have the package installed somewhere else so that | |
| it can easily be packaged, can use | |
| $ make DESTDIR=/tmp/package-root install # Unix | |
| $ mms/macro="DESTDIR=TMP:[PACKAGE-ROOT]" install ! OpenVMS | |
| The specified destination directory will be prepended to all | |
| installation target paths. | |
| Compatibility issues with previous OpenSSL versions: | |
| * COMPILING existing applications | |
| OpenSSL 1.1 hides a number of structures that were previously | |
| open. This includes all internal libssl structures and a number | |
| of EVP types. Accessor functions have been added to allow | |
| controlled access to the structures' data. | |
| This means that some software needs to be rewritten to adapt to | |
| the new ways of doing things. This often amounts to allocating | |
| an instance of a structure explicitly where you could previously | |
| allocate them on the stack as automatic variables, and using the | |
| provided accessor functions where you would previously access a | |
| structure's field directly. | |
| <TBA> | |
| Some APIs have changed as well. However, older APIs have been | |
| preserved when possible. | |
| Note on multi-threading | |
| ----------------------- | |
| For some systems, the OpenSSL Configure script knows what compiler options | |
| are needed to generate a library that is suitable for multi-threaded | |
| applications. On these systems, support for multi-threading is enabled | |
| by default; use the "no-threads" option to disable (this should never be | |
| necessary). | |
| On other systems, to enable support for multi-threading, you will have | |
| to specify at least two options: "threads", and a system-dependent option. | |
| (The latter is "-D_REENTRANT" on various systems.) The default in this | |
| case, obviously, is not to include support for multi-threading (but | |
| you can still use "no-threads" to suppress an annoying warning message | |
| from the Configure script.) | |
| OpenSSL provides built-in support for two threading models: pthreads (found on | |
| most UNIX/Linux systems), and Windows threads. No other threading models are | |
| supported. If your platform does not provide pthreads or Windows threads then | |
| you should Configure with the "no-threads" option. | |
| Note on shared libraries | |
| ------------------------ | |
| Shared libraries have certain caveats. Binary backward compatibility | |
| can't be guaranteed before OpenSSL version 1.0. The only reason to | |
| use them would be to conserve memory on systems where several programs | |
| are using OpenSSL. | |
| For some systems, the OpenSSL Configure script knows what is needed to | |
| build shared libraries for libcrypto and libssl. On these systems, | |
| the shared libraries are currently not created by default, but giving | |
| the option "shared" will get them created. This method supports Makefile | |
| targets for shared library creation, like linux-shared. Those targets | |
| can currently be used on their own just as well, but this is expected | |
| to change in future versions of OpenSSL. | |
| Note on random number generation | |
| -------------------------------- | |
| Availability of cryptographically secure random numbers is required for | |
| secret key generation. OpenSSL provides several options to seed the | |
| internal PRNG. If not properly seeded, the internal PRNG will refuse | |
| to deliver random bytes and a "PRNG not seeded error" will occur. | |
| On systems without /dev/urandom (or similar) device, it may be necessary | |
| to install additional support software to obtain random seed. | |
| Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(), | |
| and the FAQ for more information. | |