=pod
{- OpenSSL::safe::output_do_not_edit_headers(); -}

=head1 NAME

openssl-rsautl - RSA command

=head1 SYNOPSIS

B<openssl> B<rsautl>
[B<-help>]
[B<-in> I<file>]
[B<-passin> I<arg>]
[B<-rev>]
[B<-out> I<file>]
[B<-inkey> I<file>]
[B<-keyform> B<DER>|B<PEM>|B<ENGINE>]
[B<-pubin>]
[B<-certin>]
[B<-sign>]
[B<-verify>]
[B<-encrypt>]
[B<-decrypt>]
[B<-pkcs>]
[B<-x931>]
[B<-oaep>]
[B<-ssl>]
[B<-raw>]
[B<-pkcs>]
[B<-ssl>]
[B<-raw>]
[B<-hexdump>]
[B<-asn1parse>]
{- $OpenSSL::safe::opt_engine_synopsis -}
{- $OpenSSL::safe::opt_r_synopsis -}
{- $OpenSSL::safe::opt_provider_synopsis -}

=for openssl ifdef engine

=head1 DESCRIPTION

This command has been deprecated.
The L<openssl-pkeyutl(1)> command should be used instead.

This command can be used to sign, verify, encrypt and decrypt
data using the RSA algorithm.

=head1 OPTIONS

=over 4

=item B<-help>

Print out a usage message.

=item B<-in> I<filename>

This specifies the input filename to read data from or standard input
if this option is not specified.

=item B<-passin> I<arg>

The passphrase used in the output file.
See see L<openssl(1)/Pass Phrase Options>.

=item B<-rev>

Reverse the order of the input.

=item B<-out> I<filename>

Specifies the output filename to write to or standard output by
default.

=item B<-inkey> I<file>

The input key file, by default it should be an RSA private key.

=item B<-keyform> B<DER>|B<PEM>|B<ENGINE>

The key format; the default is B<PEM>.
See L<openssl(1)/Format Options> for details.

=item B<-pubin>

The input file is an RSA public key.

=item B<-certin>

The input is a certificate containing an RSA public key.

=item B<-sign>

Sign the input data and output the signed result. This requires
an RSA private key.

=item B<-verify>

Verify the input data and output the recovered data.

=item B<-encrypt>

Encrypt the input data using an RSA public key.

=item B<-decrypt>

Decrypt the input data using an RSA private key.

=item B<-pkcs>, B<-oaep>, B<-x931> B<-ssl>, B<-raw>

The padding to use: PKCS#1 v1.5 (the default), PKCS#1 OAEP,
ANSI X9.31,
special padding used in SSL v2 backwards compatible handshakes,
or no padding, respectively.
For signatures, only B<-pkcs> and B<-raw> can be used.

=item B<-hexdump>

Hex dump the output data.

=item B<-asn1parse>

Parse the ASN.1 output data, this is useful when combined with the
B<-verify> option.

{- $OpenSSL::safe::opt_engine_item -}

{- $OpenSSL::safe::opt_r_item -}

{- $OpenSSL::safe::opt_provider_item -}

=back

=head1 NOTES

Since this command uses the RSA algorithm directly, it can only be
used to sign or verify small pieces of data.

=head1 EXAMPLES

Examples equivalent to these can be found in the documentation for the
non-deprecated L<openssl-pkeyutl(1)> command.

Sign some data using a private key:

 openssl rsautl -sign -in file -inkey key.pem -out sig

Recover the signed data

 openssl rsautl -verify -in sig -inkey key.pem

Examine the raw signed data:

 openssl rsautl -verify -in sig -inkey key.pem -raw -hexdump

 0000 - 00 01 ff ff ff ff ff ff-ff ff ff ff ff ff ff ff   ................
 0010 - ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff   ................
 0020 - ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff   ................
 0030 - ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff   ................
 0040 - ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff   ................
 0050 - ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff   ................
 0060 - ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff   ................
 0070 - ff ff ff ff 00 68 65 6c-6c 6f 20 77 6f 72 6c 64   .....hello world

The PKCS#1 block formatting is evident from this. If this was done using
encrypt and decrypt the block would have been of type 2 (the second byte)
and random padding data visible instead of the 0xff bytes.

It is possible to analyse the signature of certificates using this
command in conjunction with L<openssl-asn1parse(1)>. Consider the self signed
example in F<certs/pca-cert.pem>. Running L<openssl-asn1parse(1)> as follows
yields:

 openssl asn1parse -in pca-cert.pem

    0:d=0  hl=4 l= 742 cons: SEQUENCE
    4:d=1  hl=4 l= 591 cons:  SEQUENCE
    8:d=2  hl=2 l=   3 cons:   cont [ 0 ]
   10:d=3  hl=2 l=   1 prim:    INTEGER           :02
   13:d=2  hl=2 l=   1 prim:   INTEGER           :00
   16:d=2  hl=2 l=  13 cons:   SEQUENCE
   18:d=3  hl=2 l=   9 prim:    OBJECT            :md5WithRSAEncryption
   29:d=3  hl=2 l=   0 prim:    NULL
   31:d=2  hl=2 l=  92 cons:   SEQUENCE
   33:d=3  hl=2 l=  11 cons:    SET
   35:d=4  hl=2 l=   9 cons:     SEQUENCE
   37:d=5  hl=2 l=   3 prim:      OBJECT            :countryName
   42:d=5  hl=2 l=   2 prim:      PRINTABLESTRING   :AU
  ....
  599:d=1  hl=2 l=  13 cons:  SEQUENCE
  601:d=2  hl=2 l=   9 prim:   OBJECT            :md5WithRSAEncryption
  612:d=2  hl=2 l=   0 prim:   NULL
  614:d=1  hl=3 l= 129 prim:  BIT STRING


The final BIT STRING contains the actual signature. It can be extracted with:

 openssl asn1parse -in pca-cert.pem -out sig -noout -strparse 614

The certificate public key can be extracted with:

 openssl x509 -in test/testx509.pem -pubkey -noout >pubkey.pem

The signature can be analysed with:

 openssl rsautl -in sig -verify -asn1parse -inkey pubkey.pem -pubin

    0:d=0  hl=2 l=  32 cons: SEQUENCE
    2:d=1  hl=2 l=  12 cons:  SEQUENCE
    4:d=2  hl=2 l=   8 prim:   OBJECT            :md5
   14:d=2  hl=2 l=   0 prim:   NULL
   16:d=1  hl=2 l=  16 prim:  OCTET STRING
      0000 - f3 46 9e aa 1a 4a 73 c9-37 ea 93 00 48 25 08 b5   .F...Js.7...H%..

This is the parsed version of an ASN1 DigestInfo structure. It can be seen that
the digest used was md5. The actual part of the certificate that was signed can
be extracted with:

 openssl asn1parse -in pca-cert.pem -out tbs -noout -strparse 4

and its digest computed with:

 openssl md5 -c tbs
 MD5(tbs)= f3:46:9e:aa:1a:4a:73:c9:37:ea:93:00:48:25:08:b5

which it can be seen agrees with the recovered value above.

=head1 SEE ALSO

L<openssl(1)>,
L<openssl-pkeyutl(1)>,
L<openssl-dgst(1)>,
L<openssl-rsa(1)>,
L<openssl-genrsa(1)>

=head1 HISTORY

This command was deprecated in OpenSSL 3.0.

=head1 COPYRIGHT

Copyright 2000-2020 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the Apache License 2.0 (the "License").  You may not use
this file except in compliance with the License.  You can obtain a copy
in the file LICENSE in the source distribution or at
L<https://www.openssl.org/source/license.html>.

=cut