Support disabling any or all TLS or DTLS versions
Some users want to disable SSL 3.0/TLS 1.0/TLS 1.1, and enable just
TLS 1.2. In the future they might want to disable TLS 1.2 and
enable just TLS 1.3, ...
This commit makes it possible to disable any or all of the TLS or
DTLS protocols. It also considerably simplifies the SSL/TLS tests,
by auto-generating the min/max version tests based on the set of
supported protocols (425 explicitly written out tests got replaced
by two loops that generate all 425 tests if all protocols are
enabled, fewer otherwise).
Reviewed-by: Richard Levitte <levitte@openssl.org>
diff --git a/apps/s_server.c b/apps/s_server.c
index 81ee385..93f6083 100644
--- a/apps/s_server.c
+++ b/apps/s_server.c
@@ -863,9 +863,6 @@
"Do not load certificates from the default certificates directory"},
{"nocert", OPT_NOCERT, '-', "Don't use any certificates (Anon-DH)"},
{"quiet", OPT_QUIET, '-', "No server output"},
- {"tls1_2", OPT_TLS1_2, '-', "just talk TLSv1.2"},
- {"tls1_1", OPT_TLS1_1, '-', "Just talk TLSv1.1"},
- {"tls1", OPT_TLS1, '-', "Just talk TLSv1"},
{"no_resume_ephemeral", OPT_NO_RESUME_EPHEMERAL, '-',
"Disable caching and tickets if ephemeral (EC)DH is used"},
{"www", OPT_WWW, '-', "Respond to a 'GET /' with a status page"},
@@ -937,16 +934,29 @@
#ifndef OPENSSL_NO_SSL3
{"ssl3", OPT_SSL3, '-', "Just talk SSLv3"},
#endif
+#ifndef OPENSSL_NO_TLS1
+ {"tls1", OPT_TLS1, '-', "Just talk TLSv1"},
+#endif
+#ifndef OPENSSL_NO_TLS1_1
+ {"tls1_1", OPT_TLS1_1, '-', "Just talk TLSv1.1"},
+#endif
+#ifndef OPENSSL_NO_TLS1_2
+ {"tls1_2", OPT_TLS1_2, '-', "just talk TLSv1.2"},
+#endif
#ifndef OPENSSL_NO_DTLS
{"dtls", OPT_DTLS, '-'},
- {"dtls1", OPT_DTLS1, '-', "Just talk DTLSv1"},
- {"dtls1_2", OPT_DTLS1_2, '-', "Just talk DTLSv1.2"},
{"timeout", OPT_TIMEOUT, '-', "Enable timeouts"},
{"mtu", OPT_MTU, 'p', "Set link layer MTU"},
{"chain", OPT_CHAIN, '-', "Read a certificate chain"},
{"listen", OPT_LISTEN, '-',
"Listen for a DTLS ClientHello with a cookie and then connect"},
#endif
+#ifndef OPENSSL_NO_DTLS1
+ {"dtls1", OPT_DTLS1, '-', "Just talk DTLSv1"},
+#endif
+#ifndef OPENSSL_NO_DTLS1_2
+ {"dtls1_2", OPT_DTLS1_2, '-', "Just talk DTLSv1.2"},
+#endif
#ifndef OPENSSL_NO_DH
{"no_dhe", OPT_NO_DHE, '-', "Disable ephemeral DH"},
#endif
@@ -1039,19 +1049,6 @@
prog = opt_init(argc, argv, s_server_options);
while ((o = opt_next()) != OPT_EOF) {
switch (o) {
-#ifdef OPENSSL_NO_PSK
- case OPT_PSK_HINT:
- case OPT_PSK:
-#endif
-#ifdef OPENSSL_NO_DTLS
- case OPT_DTLS:
- case OPT_DTLS1:
- case OPT_DTLS1_2:
- case OPT_TIMEOUT:
- case OPT_MTU:
- case OPT_CHAIN:
- case OPT_LISTEN:
-#endif
case OPT_EOF:
case OPT_ERR:
opthelp:
@@ -1299,33 +1296,33 @@
case OPT_NO_RESUME_EPHEMERAL:
no_resume_ephemeral = 1;
break;
-#ifndef OPENSSL_NO_PSK
case OPT_PSK_HINT:
+#ifndef OPENSSL_NO_PSK
psk_identity_hint = opt_arg();
+#endif
break;
case OPT_PSK:
+#ifndef OPENSSL_NO_PSK
for (p = psk_key = opt_arg(); *p; p++) {
if (isxdigit(*p))
continue;
BIO_printf(bio_err, "Not a hex number '%s'\n", *argv);
goto end;
}
- break;
#endif
-#ifndef OPENSSL_NO_SRP
+ break;
case OPT_SRPVFILE:
+#ifndef OPENSSL_NO_SRP
srp_verifier_file = opt_arg();
meth = TLSv1_server_method();
+#endif
break;
case OPT_SRPUSERSEED:
+#ifndef OPENSSL_NO_SRP
srpuserseed = opt_arg();
meth = TLSv1_server_method();
- break;
-#else
- case OPT_SRPVFILE:
- case OPT_SRPUSERSEED:
- break;
#endif
+ break;
case OPT_REV:
rev = 1;
break;
@@ -1347,40 +1344,58 @@
#endif
break;
case OPT_TLS1_2:
+#ifndef OPENSSL_NO_TLS1_2
meth = TLSv1_2_server_method();
+#endif
break;
case OPT_TLS1_1:
+#ifndef OPENSSL_NO_TLS1_1
meth = TLSv1_1_server_method();
+#endif
break;
case OPT_TLS1:
+#ifndef OPENSSL_NO_TLS1
meth = TLSv1_server_method();
+#endif
break;
-#ifndef OPENSSL_NO_DTLS
case OPT_DTLS:
+#ifndef OPENSSL_NO_DTLS
meth = DTLS_server_method();
socket_type = SOCK_DGRAM;
+#endif
break;
case OPT_DTLS1:
+#ifndef OPENSSL_NO_DTLS1
meth = DTLSv1_server_method();
socket_type = SOCK_DGRAM;
+#endif
break;
case OPT_DTLS1_2:
+#ifndef OPENSSL_NO_DTLS1_2
meth = DTLSv1_2_server_method();
socket_type = SOCK_DGRAM;
+#endif
break;
case OPT_TIMEOUT:
+#ifndef OPENSSL_NO_DTLS
enable_timeouts = 1;
+#endif
break;
case OPT_MTU:
+#ifndef OPENSSL_NO_DTLS
socket_mtu = atol(opt_arg());
+#endif
break;
case OPT_CHAIN:
+#ifndef OPENSSL_NO_DTLS
cert_chain = 1;
+#endif
break;
case OPT_LISTEN:
+#ifndef OPENSSL_NO_DTLS
dtlslisten = 1;
- break;
#endif
+ break;
case OPT_ID_PREFIX:
session_id_prefix = opt_arg();
break;
