=pod

=head1 NAME

OCSP_resp_get0_certs,
OCSP_resp_get0_signer,
OCSP_resp_get0_id,
OCSP_resp_get1_id,
OCSP_resp_get0_produced_at,
OCSP_resp_find_status, OCSP_resp_count, OCSP_resp_get0, OCSP_resp_find,
OCSP_single_get0_status, OCSP_check_validity
- OCSP response utility functions

=head1 SYNOPSIS

 #include <openssl/ocsp.h>

 int OCSP_resp_find_status(OCSP_BASICRESP *bs, OCSP_CERTID *id, int *status,
                           int *reason,
                           ASN1_GENERALIZEDTIME **revtime,
                           ASN1_GENERALIZEDTIME **thisupd,
                           ASN1_GENERALIZEDTIME **nextupd);

 int OCSP_resp_count(OCSP_BASICRESP *bs);
 OCSP_SINGLERESP *OCSP_resp_get0(OCSP_BASICRESP *bs, int idx);
 int OCSP_resp_find(OCSP_BASICRESP *bs, OCSP_CERTID *id, int last);
 int OCSP_single_get0_status(OCSP_SINGLERESP *single, int *reason,
                             ASN1_GENERALIZEDTIME **revtime,
                             ASN1_GENERALIZEDTIME **thisupd,
                             ASN1_GENERALIZEDTIME **nextupd);

 const ASN1_GENERALIZEDTIME *OCSP_resp_get0_produced_at(
                             const OCSP_BASICRESP* single);

 const STACK_OF(X509) *OCSP_resp_get0_certs(const OCSP_BASICRESP *bs);

 int OCSP_resp_get0_signer(OCSP_BASICRESP *bs, X509 **signer,
                           STACK_OF(X509) *extra_certs);

 int OCSP_resp_get0_id(const OCSP_BASICRESP *bs,
                       const ASN1_OCTET_STRING **pid,
                       const X509_NAME **pname);
 int OCSP_resp_get1_id(const OCSP_BASICRESP *bs,
                       ASN1_OCTET_STRING **pid,
                       X509_NAME **pname);

 int OCSP_check_validity(ASN1_GENERALIZEDTIME *thisupd,
                         ASN1_GENERALIZEDTIME *nextupd,
                         long sec, long maxsec);

=head1 DESCRIPTION

OCSP_resp_find_status() searches B<bs> for an OCSP response for B<id>. If it is
successful the fields of the response are returned in B<*status>, B<*reason>,
B<*revtime>, B<*thisupd> and B<*nextupd>.  The B<*status> value will be one of
B<V_OCSP_CERTSTATUS_GOOD>, B<V_OCSP_CERTSTATUS_REVOKED> or
B<V_OCSP_CERTSTATUS_UNKNOWN>. The B<*reason> and B<*revtime> fields are only
set if the status is B<V_OCSP_CERTSTATUS_REVOKED>. If set the B<*reason> field
will be set to the revocation reason which will be one of
B<OCSP_REVOKED_STATUS_NOSTATUS>, B<OCSP_REVOKED_STATUS_UNSPECIFIED>,
B<OCSP_REVOKED_STATUS_KEYCOMPROMISE>, B<OCSP_REVOKED_STATUS_CACOMPROMISE>,
B<OCSP_REVOKED_STATUS_AFFILIATIONCHANGED>, B<OCSP_REVOKED_STATUS_SUPERSEDED>,
B<OCSP_REVOKED_STATUS_CESSATIONOFOPERATION>,
B<OCSP_REVOKED_STATUS_CERTIFICATEHOLD> or B<OCSP_REVOKED_STATUS_REMOVEFROMCRL>.

OCSP_resp_count() returns the number of B<OCSP_SINGLERESP> structures in B<bs>.

OCSP_resp_get0() returns the B<OCSP_SINGLERESP> structure in B<bs>
corresponding to index B<idx>. Where B<idx> runs from 0 to
OCSP_resp_count(bs) - 1.

OCSP_resp_find() searches B<bs> for B<id> and returns the index of the first
matching entry after B<last> or starting from the beginning if B<last> is -1.

OCSP_single_get0_status() extracts the fields of B<single> in B<*reason>,
B<*revtime>, B<*thisupd> and B<*nextupd>.

OCSP_resp_get0_produced_at() extracts the B<producedAt> field from the
single response B<bs>.

OCSP_resp_get0_certs() returns any certificates included in B<bs>.

OCSP_resp_get0_signer() attempts to retrive the certificate that directly
signed B<bs>.  The OCSP protocol does not require that this certificate
is included in the B<certs> field of the response, so additional certificates
can be supplied in B<extra_certs> if the certificates that may have
signed the response are known via some out-of-band mechanism.

OCSP_resp_get0_id() gets the responder id of B<bs>. If the responder ID is
a name then <*pname> is set to the name and B<*pid> is set to NULL. If the
responder ID is by key ID then B<*pid> is set to the key ID and B<*pname>
is set to NULL. OCSP_resp_get1_id() leaves ownership of B<*pid> and B<*pname>
with the caller, who is responsible for freeing them. Both functions return 1
in case of success and 0 in case of failure. If OCSP_resp_get1_id() returns 0,
no freeing of the results is necessary.

OCSP_check_validity() checks the validity of B<thisupd> and B<nextupd> values
which will be typically obtained from OCSP_resp_find_status() or
OCSP_single_get0_status(). If B<sec> is non-zero it indicates how many seconds
leeway should be allowed in the check. If B<maxsec> is positive it indicates
the maximum age of B<thisupd> in seconds.

=head1 RETURN VALUES

OCSP_resp_find_status() returns 1 if B<id> is found in B<bs> and 0 otherwise.

OCSP_resp_count() returns the total number of B<OCSP_SINGLERESP> fields in
B<bs>.

OCSP_resp_get0() returns a pointer to an B<OCSP_SINGLERESP> structure or
B<NULL> if B<idx> is out of range.

OCSP_resp_find() returns the index of B<id> in B<bs> (which may be 0) or -1 if
B<id> was not found.

OCSP_single_get0_status() returns the status of B<single> or -1 if an error
occurred.

OCSP_resp_get0_signer() returns 1 if the signing certificate was located,
or 0 on error.

=head1 NOTES

Applications will typically call OCSP_resp_find_status() using the certificate
ID of interest and then check its validity using OCSP_check_validity(). They
can then take appropriate action based on the status of the certificate.

An OCSP response for a certificate contains B<thisUpdate> and B<nextUpdate>
fields. Normally the current time should be between these two values. To
account for clock skew the B<maxsec> field can be set to non-zero in
OCSP_check_validity(). Some responders do not set the B<nextUpdate> field, this
would otherwise mean an ancient response would be considered valid: the
B<maxsec> parameter to OCSP_check_validity() can be used to limit the permitted
age of responses.

The values written to B<*revtime>, B<*thisupd> and B<*nextupd> by
OCSP_resp_find_status() and OCSP_single_get0_status() are internal pointers
which B<MUST NOT> be freed up by the calling application. Any or all of these
parameters can be set to NULL if their value is not required.

=head1 SEE ALSO

L<crypto(7)>,
L<OCSP_cert_to_id(3)>,
L<OCSP_request_add1_nonce(3)>,
L<OCSP_REQUEST_new(3)>,
L<OCSP_response_status(3)>,
L<OCSP_sendreq_new(3)>

=head1 COPYRIGHT

Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the OpenSSL license (the "License").  You may not use
this file except in compliance with the License.  You can obtain a copy
in the file LICENSE in the source distribution or at
L<https://www.openssl.org/source/license.html>.

=cut