=pod

=head1 NAME

ASN1_generate_nconf, ASN1_generate_v3 - ASN1 string generation functions

=head1 SYNOPSIS

 #include <openssl/asn1.h>

 ASN1_TYPE *ASN1_generate_nconf(const char *str, CONF *nconf);
 ASN1_TYPE *ASN1_generate_v3(const char *str, X509V3_CTX *cnf);

=head1 DESCRIPTION

These functions generate the ASN1 encoding of a string
in an B<ASN1_TYPE> structure.

I<str> contains the string to encode. I<nconf> or I<cnf> contains
the optional configuration information where additional strings
will be read from. I<nconf> will typically come from a config
file whereas I<cnf> is obtained from an B<X509V3_CTX> structure,
which will typically be used by X509 v3 certificate extension
functions. I<cnf> or I<nconf> can be set to NULL if no additional
configuration will be used.

=head1 GENERATION STRING FORMAT

The actual data encoded is determined by the string I<str> and
the configuration information. The general format of the string
is:

=over 4

=item [I<modifier>,]I<type>[:I<value>]

=back

That is zero or more comma separated modifiers followed by a type
followed by an optional colon and a value. The formats of I<type>,
I<value> and I<modifier> are explained below.

=head2 Supported Types

The supported types are listed below.
Case is not significant in the type names.
Unless otherwise specified only the B<ASCII> format is permissible.

=over 4

=item B<BOOLEAN>, B<BOOL>

This encodes a boolean type. The I<value> string is mandatory and
should be B<TRUE> or B<FALSE>. Additionally B<TRUE>, B<true>, B<Y>,
B<y>, B<YES>, B<yes>, B<FALSE>, B<false>, B<N>, B<n>, B<NO> and B<no>
are acceptable.

=item B<NULL>

Encode the B<NULL> type, the I<value> string must not be present.

=item B<INTEGER>, B<INT>

Encodes an ASN1 B<INTEGER> type. The I<value> string represents
the value of the integer, it can be prefaced by a minus sign and
is normally interpreted as a decimal value unless the prefix B<0x>
is included.

=item B<ENUMERATED>, B<ENUM>

Encodes the ASN1 B<ENUMERATED> type, it is otherwise identical to
B<INTEGER>.

=item B<OBJECT>, B<OID>

Encodes an ASN1 B<OBJECT IDENTIFIER>, the I<value> string can be
a short name, a long name or numerical format.

=item B<UTCTIME>, B<UTC>

Encodes an ASN1 B<UTCTime> structure, the value should be in
the format B<YYMMDDHHMMSSZ>.

=item B<GENERALIZEDTIME>, B<GENTIME>

Encodes an ASN1 B<GeneralizedTime> structure, the value should be in
the format B<YYYYMMDDHHMMSSZ>.

=item B<OCTETSTRING>, B<OCT>

Encodes an ASN1 B<OCTET STRING>. I<value> represents the contents
of this structure, the format strings B<ASCII> and B<HEX> can be
used to specify the format of I<value>.

=item B<BITSTRING>, B<BITSTR>

Encodes an ASN1 B<BIT STRING>. I<value> represents the contents
of this structure, the format strings B<ASCII>, B<HEX> and B<BITLIST>
can be used to specify the format of I<value>.

If the format is anything other than B<BITLIST> the number of unused
bits is set to zero.

=item B<UNIVERSALSTRING>, B<UNIV>, B<IA5>, B<IA5STRING>, B<UTF8>,
B<UTF8String>, B<BMP>, B<BMPSTRING>, B<VISIBLESTRING>,
B<VISIBLE>, B<PRINTABLESTRING>, B<PRINTABLE>, B<T61>,
B<T61STRING>, B<TELETEXSTRING>, B<GeneralString>, B<NUMERICSTRING>,
B<NUMERIC>

These encode the corresponding string types. I<value> represents the
contents of this structure. The format can be B<ASCII> or B<UTF8>.

=item B<SEQUENCE>, B<SEQ>, B<SET>

Formats the result as an ASN1 B<SEQUENCE> or B<SET> type. I<value>
should be a section name which will contain the contents. The
field names in the section are ignored and the values are in the
generated string format. If I<value> is absent then an empty SEQUENCE
will be encoded.

=back

=head2 Modifiers

Modifiers affect the following structure, they can be used to
add EXPLICIT or IMPLICIT tagging, add wrappers or to change
the string format of the final type and value. The supported
formats are documented below.

=over 4

=item B<EXPLICIT>, B<EXP>

Add an explicit tag to the following structure. This string
should be followed by a colon and the tag value to use as a
decimal value.

By following the number with B<U>, B<A>, B<P> or B<C> UNIVERSAL,
APPLICATION, PRIVATE or CONTEXT SPECIFIC tagging can be used,
the default is CONTEXT SPECIFIC.

=item B<IMPLICIT>, B<IMP>

This is the same as B<EXPLICIT> except IMPLICIT tagging is used
instead.

=item B<OCTWRAP>, B<SEQWRAP>, B<SETWRAP>, B<BITWRAP>

The following structure is surrounded by an OCTET STRING, a SEQUENCE,
a SET or a BIT STRING respectively. For a BIT STRING the number of unused
bits is set to zero.

=item B<FORMAT>

This specifies the format of the ultimate value. It should be followed
by a colon and one of the strings B<ASCII>, B<UTF8>, B<HEX> or B<BITLIST>.

If no format specifier is included then B<ASCII> is used. If B<UTF8> is
specified then the value string must be a valid B<UTF8> string. For B<HEX> the
output must be a set of hex digits. B<BITLIST> (which is only valid for a BIT
STRING) is a comma separated list of the indices of the set bits, all other
bits are zero.

=back

=head1 RETURN VALUES

ASN1_generate_nconf() and ASN1_generate_v3() return the encoded
data as an B<ASN1_TYPE> structure or NULL if an error occurred.

The error codes that can be obtained by L<ERR_get_error(3)>.

=head1 EXAMPLES

A simple IA5String:

 IA5STRING:Hello World

An IA5String explicitly tagged:

 EXPLICIT:0,IA5STRING:Hello World

An IA5String explicitly tagged using APPLICATION tagging:

 EXPLICIT:0A,IA5STRING:Hello World

A BITSTRING with bits 1 and 5 set and all others zero:

 FORMAT:BITLIST,BITSTRING:1,5

A more complex example using a config file to produce a
SEQUENCE consisting of a BOOL an OID and a UTF8String:

 asn1 = SEQUENCE:seq_section

 [seq_section]

 field1 = BOOLEAN:TRUE
 field2 = OID:commonName
 field3 = UTF8:Third field

This example produces an RSAPrivateKey structure, this is the
key contained in the file client.pem in all OpenSSL distributions
(note: the field names such as 'coeff' are ignored and are present just
for clarity):

 asn1=SEQUENCE:private_key
 [private_key]
 version=INTEGER:0

 n=INTEGER:0xBB6FE79432CC6EA2D8F970675A5A87BFBE1AFF0BE63E879F2AFFB93644\
 D4D2C6D000430DEC66ABF47829E74B8C5108623A1C0EE8BE217B3AD8D36D5EB4FCA1D9

 e=INTEGER:0x010001

 d=INTEGER:0x6F05EAD2F27FFAEC84BEC360C4B928FD5F3A9865D0FCAAD291E2A52F4A\
 F810DC6373278C006A0ABBA27DC8C63BF97F7E666E27C5284D7D3B1FFFE16B7A87B51D

 p=INTEGER:0xF3929B9435608F8A22C208D86795271D54EBDFB09DDEF539AB083DA912\
 D4BD57

 q=INTEGER:0xC50016F89DFF2561347ED1186A46E150E28BF2D0F539A1594BBD7FE467\
 46EC4F

 exp1=INTEGER:0x9E7D4326C924AFC1DEA40B45650134966D6F9DFA3A7F9D698CD4ABEA\
 9C0A39B9

 exp2=INTEGER:0xBA84003BB95355AFB7C50DF140C60513D0BA51D637272E355E397779\
 E7B2458F

 coeff=INTEGER:0x30B9E4F2AFA5AC679F920FC83F1F2DF1BAF1779CF989447FABC2F5\
 628657053A

This example is the corresponding public key in a SubjectPublicKeyInfo
structure:

 # Start with a SEQUENCE
 asn1=SEQUENCE:pubkeyinfo

 # pubkeyinfo contains an algorithm identifier and the public key wrapped
 # in a BIT STRING
 [pubkeyinfo]
 algorithm=SEQUENCE:rsa_alg
 pubkey=BITWRAP,SEQUENCE:rsapubkey

 # algorithm ID for RSA is just an OID and a NULL
 [rsa_alg]
 algorithm=OID:rsaEncryption
 parameter=NULL

 # Actual public key: modulus and exponent
 [rsapubkey]
 n=INTEGER:0xBB6FE79432CC6EA2D8F970675A5A87BFBE1AFF0BE63E879F2AFFB93644\
 D4D2C6D000430DEC66ABF47829E74B8C5108623A1C0EE8BE217B3AD8D36D5EB4FCA1D9

 e=INTEGER:0x010001

=head1 SEE ALSO

L<ERR_get_error(3)>

=head1 COPYRIGHT

Copyright 2002-2021 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the Apache License 2.0 (the "License").  You may not use
this file except in compliance with the License.  You can obtain a copy
in the file LICENSE in the source distribution or at
L<https://www.openssl.org/source/license.html>.

=cut