=pod

=head1 NAME

SSL_CTX_new, SSLv3_method, SSLv3_server_method, SSLv3_client_method,
TLSv1_method, TLSv1_server_method, TLSv1_client_method, TLSv1_1_method,
TLSv1_1_server_method, TLSv1_1_client_method, TLS_method,
TLS_server_method, TLS_client_method, SSLv23_method, SSLv23_server_method,
SSLv23_client_method, DTLS_method, DTLS_server_method, DTLS_client_method,
DTLSv1_method, DTLSv1_server_method, DTLSv1_client_method,
DTLSv1_2_method, DTLSv1_2_server_method, DTLSv1_2_client_method -
create a new SSL_CTX object as framework for TLS/SSL or DTLS enabled
functions

=head1 SYNOPSIS

 #include <openssl/ssl.h>

 SSL_CTX *SSL_CTX_new(const SSL_METHOD *method);

 const SSL_METHOD *TLS_method(void);
 const SSL_METHOD *TLS_server_method(void);
 const SSL_METHOD *TLS_client_method(void);

 #define SSLv23_method           TLS_method
 #define SSLv23_server_method    TLS_server_method
 #define SSLv23_client_method    TLS_client_method

 #ifndef OPENSSL_NO_SSL3_METHOD
 const SSL_METHOD *SSLv3_method(void);
 const SSL_METHOD *SSLv3_server_method(void);
 const SSL_METHOD *SSLv3_client_method(void);
 #endif

 const SSL_METHOD *TLSv1_method(void);
 const SSL_METHOD *TLSv1_server_method(void);
 const SSL_METHOD *TLSv1_client_method(void);

 const SSL_METHOD *TLSv1_1_method(void);
 const SSL_METHOD *TLSv1_1_server_method(void);
 const SSL_METHOD *TLSv1_1_client_method(void);

 const SSL_METHOD *TLSv1_2_method(void);
 const SSL_METHOD *TLSv1_2_server_method(void);
 const SSL_METHOD *TLSv1_2_client_method(void);

 const SSL_METHOD *DTLS_method(void);
 const SSL_METHOD *DTLS_server_method(void);
 const SSL_METHOD *DTLS_client_method(void);

 const SSL_METHOD *DTLSv1_method(void);
 const SSL_METHOD *DTLSv1_server_method(void);
 const SSL_METHOD *DTLSv1_client_method(void);

 const SSL_METHOD *DTLSv1_2_method(void);
 const SSL_METHOD *DTLSv1_2_server_method(void);
 const SSL_METHOD *DTLSv1_2_client_method(void);

=head1 DESCRIPTION

SSL_CTX_new() creates a new B<SSL_CTX> object as framework to
establish TLS/SSL or DTLS enabled connections.

=head1 NOTES

The SSL_CTX object uses B<method> as connection method.
The methods exist in a generic type (for client and server use), a server only
type, and a client only type.
B<method> can be of the following types:

=over 4

=item SSLv3_method(), SSLv3_server_method(), SSLv3_client_method()

An SSL connection established with these methods will only understand
the SSLv3 protocol.
A client will send out a SSLv3 client hello messages and will
indicate that it supports SSLv3.
A server will only understand SSLv3 client hello message and only
support the SSLv3 protocol.

=item TLSv1_method(), TLSv1_server_method(), TLSv1_client_method()

A TLS connection established with these methods will only understand
the TLS 1.0 protocol.

=item TLSv1_1_method(), TLSv1_1_server_method(), TLSv1_1_client_method()

A TLS connection established with these methods will only understand
the TLS 1.1 protocol.

=item TLSv1_2_method(), TLSv1_2_server_method(), TLSv1_2_client_method()

A TLS connection established with these methods will only understand
the TLS 1.2 protocol.

=item TLS_method(), TLS_server_method(), TLS_client_method()

A TLS/SSL connection established with these methods may understand
the SSLv3, TLSv1, TLSv1.1 and TLSv1.2 protocols.

If extensions are required (for example server name)
a client will send out TLSv1 client hello messages including extensions and
will indicate that it also understands TLSv1.1, TLSv1.2 and permits a
fallback to SSLv3. A server will support SSLv3, TLSv1, TLSv1.1 and TLSv1.2
protocols. This is the best choice when compatibility is a concern.

=item SSLv23_method(), SSLv23_server_method(), SSLv23_client_method()

Use of these functions is deprecated. They have been replaced with TLS_method(),
TLS_server_method() and TLS_client_method() respectively. New code should use
those functions instead.

=item DTLS_method(), DTLS_server_method(), DTLS_client_method()

A DTLS connection established with those methods understands all
supported DTLS protocols.
Currently supported protocols are DTLS 1.0 and DTLS 1.2.

=item DTLSv1_method(), DTLSv1_server_method(), DTLSv1_client_method()

A DTLS connection established with these methods will only understand
the DTLS 1.0 protocol.

=item DTLSv1_2_method(), DTLSv1_2_server_method(), DTLSv1_2_client_method()

A DTLS connection established with these methods will only understand
the DTLS 1.2 protocol.

=back

TLS_method(), TLS_server_method(), TLS_client_method(), DTLS_method(),
DTLS_server_method() and DTLS_client_method() are the version
flexible methods.
All other methods only support one specific protocol version.
Use these methods instead of the other version specific methods.

If you want to limit the supported protocols for the version flexible
methods you can use SSL_CTX_set_min_proto_version(),
SSL_set_min_proto_version(), SSL_CTX_set_max_proto_version() and
SSL_set_max_proto_version() functions.
They can also be limited using by using an option like SSL_OP_NO_SSLv3
of the SSL_CTX_set_options() or SSL_set_options() functions, but
that's not recommended.
Using these functions it is possible to choose e.g. TLS_server_method()
and be able to negotiate with all possible clients, but to only
allow newer protocols like TLS 1.0, TLS 1.1 or TLS 1.2.

SSL_CTX_new() initializes the list of ciphers, the session cache
setting, the callbacks, the keys and certificates and the options
to its default values.

=head1 RETURN VALUES

The following return values can occur:

=over 4

=item NULL

The creation of a new SSL_CTX object failed. Check the error stack to
find out the reason.

=item Pointer to an SSL_CTX object

The return value points to an allocated SSL_CTX object.

=back

=head1 HISTORY

Support for SSLv2 and the corresponding SSLv2_method(),
SSLv2_server_method() and SSLv2_client_method() functions where
removed in OpenSSL 1.1.0.

SSLv23_method(), SSLv23_server_method() and SSLv23_client_method()
were deprecated and the preferred TLS_method(), TLS_server_method()
and TLS_client_method() functions were introduced in OpenSSL 1.1.0.

=head1 SEE ALSO

L<SSL_CTX_free(3)>, L<SSL_accept(3)>,
L<SSL_CTX_set_min_proto_version(3)>,
L<ssl(3)>,  L<SSL_set_connect_state(3)>

=cut