The testing strategy for Perfetto is rather complex due to the wide variety of build configurations and embedding targets.
Common test targets (all platforms / checkouts):
perfetto_unittests:
Platform-agnostic unit-tests.
perfetto_integrationtests:
End-to-end tests, involving the protobuf-based IPC transport and ftrace integration (Linux/Android only).
perfetto_benchmarks:
Benchmarks tracking the performance of: (i) trace writing, (ii) trace readback and (iii) ftrace raw pipe -> protobuf translation.
tools/ninja -C out/default perfetto_{unittests,integrationtests,benchmarks} out/default/perfetto_unittests --gtest_help
perfetto_integrationtests requires that the ftrace debugfs directory is is readable/writable by the current user on Linux:
sudo chown -R $USER /sys/kernel/debug/tracing
1A) Connect a device through adb
1B) Start the build-in emulator (supported on Linux and MacOS):
tools/install-build-deps --android tools/run_android_emulator &
tools/run_android_test out/default perfetto_unittests
Perfetto is tested in a variety of locations:
Perfetto CI: https://ci.perfetto.dev/
Builds and runs perfetto_{unittests,integrationtests,benchmarks} from the standalone checkout. Benchmarks are ran in a reduced form for smoke testing. See this doc for more details.
Android CI (see go/apct and go/apct-guide):
runs only perfetto_integrationtests
Android presubmits (TreeHugger):
Runs before submission of every AOSP CL of external/perfetto.
Android CTS (Android test suite used run to ensure API compatibility):
Rolling runs internally.
Note that Perfetto CI uses the standalone build system and the others build as part of the Android tree.
Unit tests exist for most of the code in Perfetto on the class level. They ensure that each class broadly works as expected.
Unit tests are currently ran on ci.perfetto.dev and build.chromium.org. Running unit tests on APCT and Treehugger is WIP.
Integration tests ensure that subsystems (importantly ftrace and the IPC layer) and Perfetto as a whole is working correctly end-to-end.
There are two configurations in which integration tests can be run:
1. Production mode (Android-only)
This mode assumes that both the tracing service (traced) and the OS probes service (traced_probes) are already running. In this mode the test enables only the consumer endpoint and tests the interaction with the production services. This is the way our Android CTS and APCT tests work.
2. Standalone mode:
Starting up the daemons in the test itself and then testing against them. This is how standalone builds are tested. This is the only supported way to run integration tests on Linux and MacOS.
Trace processor is mainly tested using so called “diff tests”.
For these tests, trace processor parses a known trace and executes a query file. The output of these queries is then compared (i.e. “diff”ed) against an expected output file and discrepencies are highlighted.
Similar diff tests are also available when writing metrics - instead of a query file, the metric name is used and the expected output file contains the expected result of computing the metric.
These tests (for both queries and metrics) can be run as follows:
tools/ninja -C <out directory> tools/diff_test_trace_processor.py <out directory>/trace_processor_shell
To add a new diff test (for query tests only), the tools/add_tp_diff_test.py script is useful. It will automatically create the query and expected output files and adds them both to the index. For metrics, this has to be done manually for now.
TIP: Query diff tests are expected to only have a single query which produces output in the whole file (usually at the end). Calling SELECT RUN_METRIC('metric file') can trip up this check as this query generates some hidden output. To address this issue, if a query only has column is named suppress_query_output, even if it has output, this will be ignored (for example, SELECT RUN_METRIC('metric file') as suppress_query_output)
The pixel tests are used to ensure core user journeys work by verifying they are the same pixel to pixel against a golden screenshot. They use a headless chrome to load the webpage and take a screenshot and compare pixel by pixel a golden screenshot. You can run these tests by using ui/run-integrationtests.
These test fail when a certain number of pixels are different. If these tests fail, you'll need to investigate the diff and determine if its intentional. If its a desired change you will need to update the screenshots on a linux machine to get the CI to pass. You can update them by generating and uploading a new baseline (this requires access to a google bucket through gcloud which only googlers have access to, googlers can install gcloud here).
ui/run-integrationtests --rebaseline tools/test_data upload
Once finished you can commit and upload as part of your CL to cause the CI to use your new screenshots.
NOTE: If you see a failing diff test you can see the pixel differences on the CI by using a link ending with ui-test-artifacts/index.html. Report located on that page contains changed screenshots as well as a command to accept the changes if these are desirable.
CTS tests ensure that any vendors who modify Android remain compliant with the platform API.
These tests include a subset of the integration tests above as well as adding more complex tests which ensure interaction between platform (e.g. Android apps etc.) and Perfetto is not broken.
The relevant targets are CtsPerfettoProducerApp and CtsPerfettoTestCases. Once these are built, the following commands should be run:
adb push $ANDROID_HOST_OUT/cts/android-cts/testcases/CtsPerfettoTestCases64 /data/local/tmp/ adb install -r $ANDROID_HOST_OUT/cts/android-cts/testcases/CtsPerfettoProducerApp.apk
Next, the app named android.perfetto.producer should be run on the device.
Finally, the following command should be run:
adb shell /data/local/tmp/CtsPerfettoTestCases64
Perfetto is constantly rolled into chromium's //third_party/perfetto via this autoroller.
The Chromium CI runs the perfetto_unittests target, as defined in the buildbot config.
You can also test a pending Perfetto CL against Chromium‘s CI / TryBots before submitting it. This can be useful when making trickier API changes or to test on platforms that the Perfetto CI doesn’t cover (e.g. Windows, MacOS), allowing you to verify the patch before you submit it (and it then eventually auto-rolls into Chromium).
To do this, first make sure you have uploaded your Perfetto patch to the Android Gerrit. Next, create a new Chromium CL that modifies Chromium's //src/DEPS file.
If you recently uploaded your change, it may be enough to modify the git commit hash in the DEPS entry for src/third_party/perfetto:
'src/third_party/perfetto':
Var('android_git') + '/platform/external/perfetto.git' + '@' + '8fe19f55468ee227e99c1a682bd8c0e8f7e5bcdb',
Replace the git hash with the commit hash of your most recent patch set, which you can find in gerrit next to the active patch set number.
Alternatively, you can add hooks to patch in the pending CL on top of Chromium‘s current third_party/perfetto revision. For this, add the following entries to the hooks array in Chromium’s //src/DEPS file, modifying the refs/changes/XX/YYYYYYY/ZZ to the appropriate values for your gerrit change. You can see these values when pressing the “Download” button in gerrit. You can also use this method to patch in multiple Perfetto changes at once by adding additional hooks entries. Here's an example CL.
{
'name': 'fetch_custom_patch',
'pattern': '.',
'action': [ 'git', '-C', 'src/third_party/perfetto/',
'fetch', 'https://android.googlesource.com/platform/external/perfetto',
'refs/changes/XX/YYYYYYY/ZZ',
],
},
{
'name': 'apply_custom_patch',
'pattern': '.',
'action': ['git', '-C', 'src/third_party/perfetto/',
'-c', 'user.name=Custom Patch', '-c', 'user.email=custompatch@example.com',
'cherry-pick', 'FETCH_HEAD',
],
},
If you‘d like to test your change against the SDK build of Chrome, you can add Cq-Include-Trybots: lines for perfetto SDK trybots to the change description in gerrit (this won’t be needed once Chrome's migration to the SDK is complete, see tracking bug):
Cq-Include-Trybots: luci.chromium.try:linux-perfetto-rel Cq-Include-Trybots: luci.chromium.try:android-perfetto-rel Cq-Include-Trybots: luci.chromium.try:mac-perfetto-rel Cq-Include-Trybots: luci.chromium.try:win-perfetto-rel