blob: ea6fa78fa88ff8e8cbddc63537984d5120a7b321 [file] [log] [blame]
// Copyright 2013 The Flutter Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
part of dart.ui;
// Examples can assume:
// // (for the example in Color)
// // ignore_for_file: use_full_hex_values_for_flutter_colors
// late ui.Image _image;
// dynamic _cacheImage(dynamic _, [dynamic __]) { }
// dynamic _drawImage(dynamic _, [dynamic __]) { }
// Some methods in this file assert that their arguments are not null. These
// asserts are just to improve the error messages; they should only cover
// arguments that are either dereferenced _in Dart_, before being passed to the
// engine, or that the engine explicitly null-checks itself (after attempting to
// convert the argument to a native type). It should not be possible for a null
// or invalid value to be used by the engine even in release mode, since that
// would cause a crash. It is, however, acceptable for error messages to be much
// less useful or correct in release mode than in debug mode.
//
// Painting APIs will also warn about arguments representing NaN coordinates,
// which can not be rendered by Skia.
bool _rectIsValid(Rect rect) {
assert(!rect.hasNaN, 'Rect argument contained a NaN value.');
return true;
}
bool _rrectIsValid(RRect rrect) {
assert(!rrect.hasNaN, 'RRect argument contained a NaN value.');
return true;
}
bool _offsetIsValid(Offset offset) {
assert(!offset.dx.isNaN && !offset.dy.isNaN, 'Offset argument contained a NaN value.');
return true;
}
bool _matrix4IsValid(Float64List matrix4) {
assert(matrix4.length == 16, 'Matrix4 must have 16 entries.');
assert(matrix4.every((double value) => value.isFinite), 'Matrix4 entries must be finite.');
return true;
}
bool _radiusIsValid(Radius radius) {
assert(!radius.x.isNaN && !radius.y.isNaN, 'Radius argument contained a NaN value.');
return true;
}
Color _scaleAlpha(Color a, double factor) {
return a.withAlpha((a.alpha * factor).round().clamp(0, 255));
}
/// An immutable 32 bit color value in ARGB format.
///
/// Consider the light teal of the Flutter logo. It is fully opaque, with a red
/// channel value of 0x42 (66), a green channel value of 0xA5 (165), and a blue
/// channel value of 0xF5 (245). In the common "hash syntax" for color values,
/// it would be described as `#42A5F5`.
///
/// Here are some ways it could be constructed:
///
/// ```dart
/// Color c1 = const Color(0xFF42A5F5);
/// Color c2 = const Color.fromARGB(0xFF, 0x42, 0xA5, 0xF5);
/// Color c3 = const Color.fromARGB(255, 66, 165, 245);
/// Color c4 = const Color.fromRGBO(66, 165, 245, 1.0);
/// ```
///
/// If you are having a problem with `Color` wherein it seems your color is just
/// not painting, check to make sure you are specifying the full 8 hexadecimal
/// digits. If you only specify six, then the leading two digits are assumed to
/// be zero, which means fully-transparent:
///
/// ```dart
/// Color c1 = const Color(0xFFFFFF); // fully transparent white (invisible)
/// Color c2 = const Color(0xFFFFFFFF); // fully opaque white (visible)
/// ```
///
/// See also:
///
/// * [Colors](https://api.flutter.dev/flutter/material/Colors-class.html), which
/// defines the colors found in the Material Design specification.
class Color {
/// Construct a color from the lower 32 bits of an [int].
///
/// The bits are interpreted as follows:
///
/// * Bits 24-31 are the alpha value.
/// * Bits 16-23 are the red value.
/// * Bits 8-15 are the green value.
/// * Bits 0-7 are the blue value.
///
/// In other words, if AA is the alpha value in hex, RR the red value in hex,
/// GG the green value in hex, and BB the blue value in hex, a color can be
/// expressed as `const Color(0xAARRGGBB)`.
///
/// For example, to get a fully opaque orange, you would use `const
/// Color(0xFFFF9000)` (`FF` for the alpha, `FF` for the red, `90` for the
/// green, and `00` for the blue).
const Color(int value) : value = value & 0xFFFFFFFF;
/// Construct a color from the lower 8 bits of four integers.
///
/// * `a` is the alpha value, with 0 being transparent and 255 being fully
/// opaque.
/// * `r` is [red], from 0 to 255.
/// * `g` is [green], from 0 to 255.
/// * `b` is [blue], from 0 to 255.
///
/// Out of range values are brought into range using modulo 255.
///
/// See also [fromRGBO], which takes the alpha value as a floating point
/// value.
const Color.fromARGB(int a, int r, int g, int b) :
value = (((a & 0xff) << 24) |
((r & 0xff) << 16) |
((g & 0xff) << 8) |
((b & 0xff) << 0)) & 0xFFFFFFFF;
/// Create a color from red, green, blue, and opacity, similar to `rgba()` in CSS.
///
/// * `r` is [red], from 0 to 255.
/// * `g` is [green], from 0 to 255.
/// * `b` is [blue], from 0 to 255.
/// * `opacity` is alpha channel of this color as a double, with 0.0 being
/// transparent and 1.0 being fully opaque.
///
/// Out of range values are brought into range using modulo 255.
///
/// See also [fromARGB], which takes the opacity as an integer value.
const Color.fromRGBO(int r, int g, int b, double opacity) :
value = ((((opacity * 0xff ~/ 1) & 0xff) << 24) |
((r & 0xff) << 16) |
((g & 0xff) << 8) |
((b & 0xff) << 0)) & 0xFFFFFFFF;
/// A 32 bit value representing this color.
///
/// The bits are assigned as follows:
///
/// * Bits 24-31 are the alpha value.
/// * Bits 16-23 are the red value.
/// * Bits 8-15 are the green value.
/// * Bits 0-7 are the blue value.
final int value;
/// The alpha channel of this color in an 8 bit value.
///
/// A value of 0 means this color is fully transparent. A value of 255 means
/// this color is fully opaque.
int get alpha => (0xff000000 & value) >> 24;
/// The alpha channel of this color as a double.
///
/// A value of 0.0 means this color is fully transparent. A value of 1.0 means
/// this color is fully opaque.
double get opacity => alpha / 0xFF;
/// The red channel of this color in an 8 bit value.
int get red => (0x00ff0000 & value) >> 16;
/// The green channel of this color in an 8 bit value.
int get green => (0x0000ff00 & value) >> 8;
/// The blue channel of this color in an 8 bit value.
int get blue => (0x000000ff & value) >> 0;
/// Returns a new color that matches this color with the alpha channel
/// replaced with `a` (which ranges from 0 to 255).
///
/// Out of range values will have unexpected effects.
Color withAlpha(int a) {
return Color.fromARGB(a, red, green, blue);
}
/// Returns a new color that matches this color with the alpha channel
/// replaced with the given `opacity` (which ranges from 0.0 to 1.0).
///
/// Out of range values will have unexpected effects.
Color withOpacity(double opacity) {
assert(opacity >= 0.0 && opacity <= 1.0);
return withAlpha((255.0 * opacity).round());
}
/// Returns a new color that matches this color with the red channel replaced
/// with `r` (which ranges from 0 to 255).
///
/// Out of range values will have unexpected effects.
Color withRed(int r) {
return Color.fromARGB(alpha, r, green, blue);
}
/// Returns a new color that matches this color with the green channel
/// replaced with `g` (which ranges from 0 to 255).
///
/// Out of range values will have unexpected effects.
Color withGreen(int g) {
return Color.fromARGB(alpha, red, g, blue);
}
/// Returns a new color that matches this color with the blue channel replaced
/// with `b` (which ranges from 0 to 255).
///
/// Out of range values will have unexpected effects.
Color withBlue(int b) {
return Color.fromARGB(alpha, red, green, b);
}
// See <https://www.w3.org/TR/WCAG20/#relativeluminancedef>
static double _linearizeColorComponent(double component) {
if (component <= 0.03928) {
return component / 12.92;
}
return math.pow((component + 0.055) / 1.055, 2.4) as double;
}
/// Returns a brightness value between 0 for darkest and 1 for lightest.
///
/// Represents the relative luminance of the color. This value is computationally
/// expensive to calculate.
///
/// See <https://en.wikipedia.org/wiki/Relative_luminance>.
double computeLuminance() {
// See <https://www.w3.org/TR/WCAG20/#relativeluminancedef>
final double R = _linearizeColorComponent(red / 0xFF);
final double G = _linearizeColorComponent(green / 0xFF);
final double B = _linearizeColorComponent(blue / 0xFF);
return 0.2126 * R + 0.7152 * G + 0.0722 * B;
}
/// Linearly interpolate between two colors.
///
/// This is intended to be fast but as a result may be ugly. Consider
/// [HSVColor] or writing custom logic for interpolating colors.
///
/// If either color is null, this function linearly interpolates from a
/// transparent instance of the other color. This is usually preferable to
/// interpolating from [material.Colors.transparent] (`const
/// Color(0x00000000)`), which is specifically transparent _black_.
///
/// The `t` argument represents position on the timeline, with 0.0 meaning
/// that the interpolation has not started, returning `a` (or something
/// equivalent to `a`), 1.0 meaning that the interpolation has finished,
/// returning `b` (or something equivalent to `b`), and values in between
/// meaning that the interpolation is at the relevant point on the timeline
/// between `a` and `b`. The interpolation can be extrapolated beyond 0.0 and
/// 1.0, so negative values and values greater than 1.0 are valid (and can
/// easily be generated by curves such as [Curves.elasticInOut]). Each channel
/// will be clamped to the range 0 to 255.
///
/// Values for `t` are usually obtained from an [Animation<double>], such as
/// an [AnimationController].
static Color? lerp(Color? a, Color? b, double t) {
if (b == null) {
if (a == null) {
return null;
} else {
return _scaleAlpha(a, 1.0 - t);
}
} else {
if (a == null) {
return _scaleAlpha(b, t);
} else {
return Color.fromARGB(
_clampInt(_lerpInt(a.alpha, b.alpha, t).toInt(), 0, 255),
_clampInt(_lerpInt(a.red, b.red, t).toInt(), 0, 255),
_clampInt(_lerpInt(a.green, b.green, t).toInt(), 0, 255),
_clampInt(_lerpInt(a.blue, b.blue, t).toInt(), 0, 255),
);
}
}
}
/// Combine the foreground color as a transparent color over top
/// of a background color, and return the resulting combined color.
///
/// This uses standard alpha blending ("SRC over DST") rules to produce a
/// blended color from two colors. This can be used as a performance
/// enhancement when trying to avoid needless alpha blending compositing
/// operations for two things that are solid colors with the same shape, but
/// overlay each other: instead, just paint one with the combined color.
static Color alphaBlend(Color foreground, Color background) {
final int alpha = foreground.alpha;
if (alpha == 0x00) { // Foreground completely transparent.
return background;
}
final int invAlpha = 0xff - alpha;
int backAlpha = background.alpha;
if (backAlpha == 0xff) { // Opaque background case
return Color.fromARGB(
0xff,
(alpha * foreground.red + invAlpha * background.red) ~/ 0xff,
(alpha * foreground.green + invAlpha * background.green) ~/ 0xff,
(alpha * foreground.blue + invAlpha * background.blue) ~/ 0xff,
);
} else { // General case
backAlpha = (backAlpha * invAlpha) ~/ 0xff;
final int outAlpha = alpha + backAlpha;
assert(outAlpha != 0x00);
return Color.fromARGB(
outAlpha,
(foreground.red * alpha + background.red * backAlpha) ~/ outAlpha,
(foreground.green * alpha + background.green * backAlpha) ~/ outAlpha,
(foreground.blue * alpha + background.blue * backAlpha) ~/ outAlpha,
);
}
}
/// Returns an alpha value representative of the provided [opacity] value.
///
/// The [opacity] value may not be null.
static int getAlphaFromOpacity(double opacity) {
return (clampDouble(opacity, 0.0, 1.0) * 255).round();
}
@override
bool operator ==(Object other) {
if (identical(this, other)) {
return true;
}
if (other.runtimeType != runtimeType) {
return false;
}
return other is Color
&& other.value == value;
}
@override
int get hashCode => value.hashCode;
@override
String toString() => 'Color(0x${value.toRadixString(16).padLeft(8, '0')})';
}
/// Algorithms to use when painting on the canvas.
///
/// When drawing a shape or image onto a canvas, different algorithms can be
/// used to blend the pixels. The different values of [BlendMode] specify
/// different such algorithms.
///
/// Each algorithm has two inputs, the _source_, which is the image being drawn,
/// and the _destination_, which is the image into which the source image is
/// being composited. The destination is often thought of as the _background_.
/// The source and destination both have four color channels, the red, green,
/// blue, and alpha channels. These are typically represented as numbers in the
/// range 0.0 to 1.0. The output of the algorithm also has these same four
/// channels, with values computed from the source and destination.
///
/// The documentation of each value below describes how the algorithm works. In
/// each case, an image shows the output of blending a source image with a
/// destination image. In the images below, the destination is represented by an
/// image with horizontal lines and an opaque landscape photograph, and the
/// source is represented by an image with vertical lines (the same lines but
/// rotated) and a bird clip-art image. The [src] mode shows only the source
/// image, and the [dst] mode shows only the destination image. In the
/// documentation below, the transparency is illustrated by a checkerboard
/// pattern. The [clear] mode drops both the source and destination, resulting
/// in an output that is entirely transparent (illustrated by a solid
/// checkerboard pattern).
///
/// The horizontal and vertical bars in these images show the red, green, and
/// blue channels with varying opacity levels, then all three color channels
/// together with those same varying opacity levels, then all three color
/// channels set to zero with those varying opacity levels, then two bars showing
/// a red/green/blue repeating gradient, the first with full opacity and the
/// second with partial opacity, and finally a bar with the three color channels
/// set to zero but the opacity varying in a repeating gradient.
///
/// ## Application to the [Canvas] API
///
/// When using [Canvas.saveLayer] and [Canvas.restore], the blend mode of the
/// [Paint] given to the [Canvas.saveLayer] will be applied when
/// [Canvas.restore] is called. Each call to [Canvas.saveLayer] introduces a new
/// layer onto which shapes and images are painted; when [Canvas.restore] is
/// called, that layer is then composited onto the parent layer, with the source
/// being the most-recently-drawn shapes and images, and the destination being
/// the parent layer. (For the first [Canvas.saveLayer] call, the parent layer
/// is the canvas itself.)
///
/// See also:
///
/// * [Paint.blendMode], which uses [BlendMode] to define the compositing
/// strategy.
enum BlendMode {
// This list comes from Skia's SkXfermode.h and the values (order) should be
// kept in sync.
// See: https://skia.org/docs/user/api/skpaint_overview/#SkXfermode
/// Drop both the source and destination images, leaving nothing.
///
/// This corresponds to the "clear" Porter-Duff operator.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_clear.png)
clear,
/// Drop the destination image, only paint the source image.
///
/// Conceptually, the destination is first cleared, then the source image is
/// painted.
///
/// This corresponds to the "Copy" Porter-Duff operator.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_src.png)
src,
/// Drop the source image, only paint the destination image.
///
/// Conceptually, the source image is discarded, leaving the destination
/// untouched.
///
/// This corresponds to the "Destination" Porter-Duff operator.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_dst.png)
dst,
/// Composite the source image over the destination image.
///
/// This is the default value. It represents the most intuitive case, where
/// shapes are painted on top of what is below, with transparent areas showing
/// the destination layer.
///
/// This corresponds to the "Source over Destination" Porter-Duff operator,
/// also known as the Painter's Algorithm.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_srcOver.png)
srcOver,
/// Composite the source image under the destination image.
///
/// This is the opposite of [srcOver].
///
/// This corresponds to the "Destination over Source" Porter-Duff operator.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_dstOver.png)
///
/// This is useful when the source image should have been painted before the
/// destination image, but could not be.
dstOver,
/// Show the source image, but only where the two images overlap. The
/// destination image is not rendered, it is treated merely as a mask. The
/// color channels of the destination are ignored, only the opacity has an
/// effect.
///
/// To show the destination image instead, consider [dstIn].
///
/// To reverse the semantic of the mask (only showing the source where the
/// destination is absent, rather than where it is present), consider
/// [srcOut].
///
/// This corresponds to the "Source in Destination" Porter-Duff operator.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_srcIn.png)
srcIn,
/// Show the destination image, but only where the two images overlap. The
/// source image is not rendered, it is treated merely as a mask. The color
/// channels of the source are ignored, only the opacity has an effect.
///
/// To show the source image instead, consider [srcIn].
///
/// To reverse the semantic of the mask (only showing the source where the
/// destination is present, rather than where it is absent), consider [dstOut].
///
/// This corresponds to the "Destination in Source" Porter-Duff operator.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_dstIn.png)
dstIn,
/// Show the source image, but only where the two images do not overlap. The
/// destination image is not rendered, it is treated merely as a mask. The color
/// channels of the destination are ignored, only the opacity has an effect.
///
/// To show the destination image instead, consider [dstOut].
///
/// To reverse the semantic of the mask (only showing the source where the
/// destination is present, rather than where it is absent), consider [srcIn].
///
/// This corresponds to the "Source out Destination" Porter-Duff operator.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_srcOut.png)
srcOut,
/// Show the destination image, but only where the two images do not overlap. The
/// source image is not rendered, it is treated merely as a mask. The color
/// channels of the source are ignored, only the opacity has an effect.
///
/// To show the source image instead, consider [srcOut].
///
/// To reverse the semantic of the mask (only showing the destination where the
/// source is present, rather than where it is absent), consider [dstIn].
///
/// This corresponds to the "Destination out Source" Porter-Duff operator.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_dstOut.png)
dstOut,
/// Composite the source image over the destination image, but only where it
/// overlaps the destination.
///
/// This corresponds to the "Source atop Destination" Porter-Duff operator.
///
/// This is essentially the [srcOver] operator, but with the output's opacity
/// channel being set to that of the destination image instead of being a
/// combination of both image's opacity channels.
///
/// For a variant with the destination on top instead of the source, see
/// [dstATop].
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_srcATop.png)
srcATop,
/// Composite the destination image over the source image, but only where it
/// overlaps the source.
///
/// This corresponds to the "Destination atop Source" Porter-Duff operator.
///
/// This is essentially the [dstOver] operator, but with the output's opacity
/// channel being set to that of the source image instead of being a
/// combination of both image's opacity channels.
///
/// For a variant with the source on top instead of the destination, see
/// [srcATop].
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_dstATop.png)
dstATop,
/// Apply a bitwise `xor` operator to the source and destination images. This
/// leaves transparency where they would overlap.
///
/// This corresponds to the "Source xor Destination" Porter-Duff operator.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_xor.png)
xor,
/// Sum the components of the source and destination images.
///
/// Transparency in a pixel of one of the images reduces the contribution of
/// that image to the corresponding output pixel, as if the color of that
/// pixel in that image was darker.
///
/// This corresponds to the "Source plus Destination" Porter-Duff operator.
///
/// This is the right blend mode for cross-fading between two images. Consider
/// two images A and B, and an interpolation time variable _t_ (from 0.0 to
/// 1.0). To cross fade between them, A should be drawn with opacity 1.0 - _t_
/// into a new layer using [BlendMode.srcOver], and B should be drawn on top
/// of it, at opacity _t_, into the same layer, using [BlendMode.plus].
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_plus.png)
plus,
/// Multiply the color components of the source and destination images.
///
/// This can only result in the same or darker colors (multiplying by white,
/// 1.0, results in no change; multiplying by black, 0.0, results in black).
///
/// When compositing two opaque images, this has similar effect to overlapping
/// two transparencies on a projector.
///
/// For a variant that also multiplies the alpha channel, consider [multiply].
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_modulate.png)
///
/// See also:
///
/// * [screen], which does a similar computation but inverted.
/// * [overlay], which combines [modulate] and [screen] to favor the
/// destination image.
/// * [hardLight], which combines [modulate] and [screen] to favor the
/// source image.
modulate,
// Following blend modes are defined in the CSS Compositing standard.
/// Multiply the inverse of the components of the source and destination
/// images, and inverse the result.
///
/// Inverting the components means that a fully saturated channel (opaque
/// white) is treated as the value 0.0, and values normally treated as 0.0
/// (black, transparent) are treated as 1.0.
///
/// This is essentially the same as [modulate] blend mode, but with the values
/// of the colors inverted before the multiplication and the result being
/// inverted back before rendering.
///
/// This can only result in the same or lighter colors (multiplying by black,
/// 1.0, results in no change; multiplying by white, 0.0, results in white).
/// Similarly, in the alpha channel, it can only result in more opaque colors.
///
/// This has similar effect to two projectors displaying their images on the
/// same screen simultaneously.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_screen.png)
///
/// See also:
///
/// * [modulate], which does a similar computation but without inverting the
/// values.
/// * [overlay], which combines [modulate] and [screen] to favor the
/// destination image.
/// * [hardLight], which combines [modulate] and [screen] to favor the
/// source image.
screen, // The last coeff mode.
/// Multiply the components of the source and destination images after
/// adjusting them to favor the destination.
///
/// Specifically, if the destination value is smaller, this multiplies it with
/// the source value, whereas is the source value is smaller, it multiplies
/// the inverse of the source value with the inverse of the destination value,
/// then inverts the result.
///
/// Inverting the components means that a fully saturated channel (opaque
/// white) is treated as the value 0.0, and values normally treated as 0.0
/// (black, transparent) are treated as 1.0.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_overlay.png)
///
/// See also:
///
/// * [modulate], which always multiplies the values.
/// * [screen], which always multiplies the inverses of the values.
/// * [hardLight], which is similar to [overlay] but favors the source image
/// instead of the destination image.
overlay,
/// Composite the source and destination image by choosing the lowest value
/// from each color channel.
///
/// The opacity of the output image is computed in the same way as for
/// [srcOver].
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_darken.png)
darken,
/// Composite the source and destination image by choosing the highest value
/// from each color channel.
///
/// The opacity of the output image is computed in the same way as for
/// [srcOver].
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_lighten.png)
lighten,
/// Divide the destination by the inverse of the source.
///
/// Inverting the components means that a fully saturated channel (opaque
/// white) is treated as the value 0.0, and values normally treated as 0.0
/// (black, transparent) are treated as 1.0.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_colorDodge.png)
colorDodge,
/// Divide the inverse of the destination by the source, and inverse the result.
///
/// Inverting the components means that a fully saturated channel (opaque
/// white) is treated as the value 0.0, and values normally treated as 0.0
/// (black, transparent) are treated as 1.0.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_colorBurn.png)
colorBurn,
/// Multiply the components of the source and destination images after
/// adjusting them to favor the source.
///
/// Specifically, if the source value is smaller, this multiplies it with the
/// destination value, whereas is the destination value is smaller, it
/// multiplies the inverse of the destination value with the inverse of the
/// source value, then inverts the result.
///
/// Inverting the components means that a fully saturated channel (opaque
/// white) is treated as the value 0.0, and values normally treated as 0.0
/// (black, transparent) are treated as 1.0.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_hardLight.png)
///
/// See also:
///
/// * [modulate], which always multiplies the values.
/// * [screen], which always multiplies the inverses of the values.
/// * [overlay], which is similar to [hardLight] but favors the destination
/// image instead of the source image.
hardLight,
/// Use [colorDodge] for source values below 0.5 and [colorBurn] for source
/// values above 0.5.
///
/// This results in a similar but softer effect than [overlay].
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_softLight.png)
///
/// See also:
///
/// * [color], which is a more subtle tinting effect.
softLight,
/// Subtract the smaller value from the bigger value for each channel.
///
/// Compositing black has no effect; compositing white inverts the colors of
/// the other image.
///
/// The opacity of the output image is computed in the same way as for
/// [srcOver].
///
/// The effect is similar to [exclusion] but harsher.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_difference.png)
difference,
/// Subtract double the product of the two images from the sum of the two
/// images.
///
/// Compositing black has no effect; compositing white inverts the colors of
/// the other image.
///
/// The opacity of the output image is computed in the same way as for
/// [srcOver].
///
/// The effect is similar to [difference] but softer.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_exclusion.png)
exclusion,
/// Multiply the components of the source and destination images, including
/// the alpha channel.
///
/// This can only result in the same or darker colors (multiplying by white,
/// 1.0, results in no change; multiplying by black, 0.0, results in black).
///
/// Since the alpha channel is also multiplied, a fully-transparent pixel
/// (opacity 0.0) in one image results in a fully transparent pixel in the
/// output. This is similar to [dstIn], but with the colors combined.
///
/// For a variant that multiplies the colors but does not multiply the alpha
/// channel, consider [modulate].
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_multiply.png)
multiply, // The last separable mode.
/// Take the hue of the source image, and the saturation and luminosity of the
/// destination image.
///
/// The effect is to tint the destination image with the source image.
///
/// The opacity of the output image is computed in the same way as for
/// [srcOver]. Regions that are entirely transparent in the source image take
/// their hue from the destination.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_hue.png)
///
/// See also:
///
/// * [color], which is a similar but stronger effect as it also applies the
/// saturation of the source image.
/// * [HSVColor], which allows colors to be expressed using Hue rather than
/// the red/green/blue channels of [Color].
hue,
/// Take the saturation of the source image, and the hue and luminosity of the
/// destination image.
///
/// The opacity of the output image is computed in the same way as for
/// [srcOver]. Regions that are entirely transparent in the source image take
/// their saturation from the destination.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_hue.png)
///
/// See also:
///
/// * [color], which also applies the hue of the source image.
/// * [luminosity], which applies the luminosity of the source image to the
/// destination.
saturation,
/// Take the hue and saturation of the source image, and the luminosity of the
/// destination image.
///
/// The effect is to tint the destination image with the source image.
///
/// The opacity of the output image is computed in the same way as for
/// [srcOver]. Regions that are entirely transparent in the source image take
/// their hue and saturation from the destination.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_color.png)
///
/// See also:
///
/// * [hue], which is a similar but weaker effect.
/// * [softLight], which is a similar tinting effect but also tints white.
/// * [saturation], which only applies the saturation of the source image.
color,
/// Take the luminosity of the source image, and the hue and saturation of the
/// destination image.
///
/// The opacity of the output image is computed in the same way as for
/// [srcOver]. Regions that are entirely transparent in the source image take
/// their luminosity from the destination.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/blend_mode_luminosity.png)
///
/// See also:
///
/// * [saturation], which applies the saturation of the source image to the
/// destination.
/// * [ImageFilter.blur], which can be used with [BackdropFilter] for a
/// related effect.
luminosity,
}
/// Quality levels for image sampling in [ImageFilter] and [Shader] objects that sample
/// images and for [Canvas] operations that render images.
///
/// When scaling up typically the quality is lowest at [none], higher at [low] and [medium],
/// and for very large scale factors (over 10x) the highest at [high].
///
/// When scaling down, [medium] provides the best quality especially when scaling an
/// image to less than half its size or for animating the scale factor between such
/// reductions. Otherwise, [low] and [high] provide similar effects for reductions of
/// between 50% and 100% but the image may lose detail and have dropouts below 50%.
///
/// To get high quality when scaling images up and down, or when the scale is
/// unknown, [medium] is typically a good balanced choice.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/filter_quality.png)
///
/// When building for the web using the `--web-renderer=html` option, filter
/// quality has no effect. All images are rendered using the respective
/// browser's default setting.
///
/// See also:
///
/// * [Paint.filterQuality], which is used to pass [FilterQuality] to the
/// engine while using drawImage calls on a [Canvas].
/// * [ImageShader].
/// * [ImageFilter.matrix].
/// * [Canvas.drawImage].
/// * [Canvas.drawImageRect].
/// * [Canvas.drawImageNine].
/// * [Canvas.drawAtlas].
enum FilterQuality {
// This list and the values (order) should be kept in sync with the equivalent list
// in lib/ui/painting/image_filter.cc
/// The fastest filtering method, albeit also the lowest quality.
///
/// This value results in a "Nearest Neighbor" algorithm which just
/// repeats or eliminates pixels as an image is scaled up or down.
none,
/// Better quality than [none], faster than [medium].
///
/// This value results in a "Bilinear" algorithm which smoothly
/// interpolates between pixels in an image.
low,
/// The best all around filtering method that is only worse than [high]
/// at extremely large scale factors.
///
/// This value improves upon the "Bilinear" algorithm specified by [low]
/// by utilizing a Mipmap that pre-computes high quality lower resolutions
/// of the image at half (and quarter and eighth, etc.) sizes and then
/// blends between those to prevent loss of detail at small scale sizes.
///
/// {@template dart.ui.filterQuality.seeAlso}
/// See also:
///
/// * [FilterQuality] class-level documentation that goes into detail about
/// relative qualities of the constant values.
/// {@endtemplate}
medium,
/// Best possible quality when scaling up images by scale factors larger than
/// 5-10x.
///
/// When images are scaled down, this can be worse than [medium] for scales
/// smaller than 0.5x, or when animating the scale factor.
///
/// This option is also the slowest.
///
/// This value results in a standard "Bicubic" algorithm which uses a 3rd order
/// equation to smooth the abrupt transitions between pixels while preserving
/// some of the sense of an edge and avoiding sharp peaks in the result.
///
/// {@macro dart.ui.filterQuality.seeAlso}
high,
}
/// Styles to use for line endings.
///
/// See also:
///
/// * [Paint.strokeCap] for how this value is used.
/// * [StrokeJoin] for the different kinds of line segment joins.
// These enum values must be kept in sync with DlStrokeCap.
enum StrokeCap {
/// Begin and end contours with a flat edge and no extension.
///
/// ![A butt cap ends line segments with a square end that stops at the end of
/// the line segment.](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/butt_cap.png)
///
/// Compare to the [square] cap, which has the same shape, but extends past
/// the end of the line by half a stroke width.
butt,
/// Begin and end contours with a semi-circle extension.
///
/// ![A round cap adds a rounded end to the line segment that protrudes
/// by one half of the thickness of the line (which is the radius of the cap)
/// past the end of the segment.](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/round_cap.png)
///
/// The cap is colored in the diagram above to highlight it: in normal use it
/// is the same color as the line.
round,
/// Begin and end contours with a half square extension. This is
/// similar to extending each contour by half the stroke width (as
/// given by [Paint.strokeWidth]).
///
/// ![A square cap has a square end that effectively extends the line length
/// by half of the stroke width.](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/square_cap.png)
///
/// The cap is colored in the diagram above to highlight it: in normal use it
/// is the same color as the line.
///
/// Compare to the [butt] cap, which has the same shape, but doesn't extend
/// past the end of the line.
square,
}
/// Styles to use for line segment joins.
///
/// This only affects line joins for polygons drawn by [Canvas.drawPath] and
/// rectangles, not points drawn as lines with [Canvas.drawPoints].
///
/// See also:
///
/// * [Paint.strokeJoin] and [Paint.strokeMiterLimit] for how this value is
/// used.
/// * [StrokeCap] for the different kinds of line endings.
// These enum values must be kept in sync with DlStrokeJoin.
enum StrokeJoin {
/// Joins between line segments form sharp corners.
///
/// {@animation 300 300 https://flutter.github.io/assets-for-api-docs/assets/dart-ui/miter_4_join.mp4}
///
/// The center of the line segment is colored in the diagram above to
/// highlight the join, but in normal usage the join is the same color as the
/// line.
///
/// See also:
///
/// * [Paint.strokeJoin], used to set the line segment join style to this
/// value.
/// * [Paint.strokeMiterLimit], used to define when a miter is drawn instead
/// of a bevel when the join is set to this value.
miter,
/// Joins between line segments are semi-circular.
///
/// {@animation 300 300 https://flutter.github.io/assets-for-api-docs/assets/dart-ui/round_join.mp4}
///
/// The center of the line segment is colored in the diagram above to
/// highlight the join, but in normal usage the join is the same color as the
/// line.
///
/// See also:
///
/// * [Paint.strokeJoin], used to set the line segment join style to this
/// value.
round,
/// Joins between line segments connect the corners of the butt ends of the
/// line segments to give a beveled appearance.
///
/// {@animation 300 300 https://flutter.github.io/assets-for-api-docs/assets/dart-ui/bevel_join.mp4}
///
/// The center of the line segment is colored in the diagram above to
/// highlight the join, but in normal usage the join is the same color as the
/// line.
///
/// See also:
///
/// * [Paint.strokeJoin], used to set the line segment join style to this
/// value.
bevel,
}
/// Strategies for painting shapes and paths on a canvas.
///
/// See [Paint.style].
// These enum values must be kept in sync with DlDrawStyle.
enum PaintingStyle {
// This list comes from dl_paint.h and the values (order) should be kept
// in sync.
/// Apply the [Paint] to the inside of the shape. For example, when
/// applied to the [Canvas.drawCircle] call, this results in a disc
/// of the given size being painted.
fill,
/// Apply the [Paint] to the edge of the shape. For example, when
/// applied to the [Canvas.drawCircle] call, this results is a hoop
/// of the given size being painted. The line drawn on the edge will
/// be the width given by the [Paint.strokeWidth] property.
stroke,
}
/// Different ways to clip a widget's content.
enum Clip {
/// No clip at all.
///
/// This is the default option for most widgets: if the content does not
/// overflow the widget boundary, don't pay any performance cost for clipping.
///
/// If the content does overflow, please explicitly specify the following
/// [Clip] options:
/// * [hardEdge], which is the fastest clipping, but with lower fidelity.
/// * [antiAlias], which is a little slower than [hardEdge], but with smoothed edges.
/// * [antiAliasWithSaveLayer], which is much slower than [antiAlias], and should
/// rarely be used.
none,
/// Clip, but do not apply anti-aliasing.
///
/// This mode enables clipping, but curves and non-axis-aligned straight lines will be
/// jagged as no effort is made to anti-alias.
///
/// Faster than other clipping modes, but slower than [none].
///
/// This is a reasonable choice when clipping is needed, if the container is an axis-
/// aligned rectangle or an axis-aligned rounded rectangle with very small corner radii.
///
/// See also:
///
/// * [antiAlias], which is more reasonable when clipping is needed and the shape is not
/// an axis-aligned rectangle.
hardEdge,
/// Clip with anti-aliasing.
///
/// This mode has anti-aliased clipping edges to achieve a smoother look.
///
/// It' s much faster than [antiAliasWithSaveLayer], but slower than [hardEdge].
///
/// This will be the common case when dealing with circles and arcs.
///
/// Different from [hardEdge] and [antiAliasWithSaveLayer], this clipping may have
/// bleeding edge artifacts.
/// (See https://fiddle.skia.org/c/21cb4c2b2515996b537f36e7819288ae for an example.)
///
/// See also:
///
/// * [hardEdge], which is a little faster, but with lower fidelity.
/// * [antiAliasWithSaveLayer], which is much slower, but can avoid the
/// bleeding edges if there's no other way.
/// * [Paint.isAntiAlias], which is the anti-aliasing switch for general draw operations.
antiAlias,
/// Clip with anti-aliasing and saveLayer immediately following the clip.
///
/// This mode not only clips with anti-aliasing, but also allocates an offscreen
/// buffer. All subsequent paints are carried out on that buffer before finally
/// being clipped and composited back.
///
/// This is very slow. It has no bleeding edge artifacts (that [antiAlias] has)
/// but it changes the semantics as an offscreen buffer is now introduced.
/// (See https://github.com/flutter/flutter/issues/18057#issuecomment-394197336
/// for a difference between paint without saveLayer and paint with saveLayer.)
///
/// This will be only rarely needed. One case where you might need this is if
/// you have an image overlaid on a very different background color. In these
/// cases, consider whether you can avoid overlaying multiple colors in one
/// spot (e.g. by having the background color only present where the image is
/// absent). If you can, [antiAlias] would be fine and much faster.
///
/// See also:
///
/// * [antiAlias], which is much faster, and has similar clipping results.
antiAliasWithSaveLayer,
}
/// A description of the style to use when drawing on a [Canvas].
///
/// Most APIs on [Canvas] take a [Paint] object to describe the style
/// to use for that operation.
class Paint {
/// Constructs an empty [Paint] object with all fields initialized to
/// their defaults.
Paint() {
if (enableDithering) {
_dither = true;
}
}
// Paint objects are encoded in two buffers:
//
// * _data is binary data in four-byte fields, each of which is either a
// uint32_t or a float. The default value for each field is encoded as
// zero to make initialization trivial. Most values already have a default
// value of zero, but some, such as color, have a non-zero default value.
// To encode or decode these values, XOR the value with the default value.
//
// * _objects is a list of unencodable objects, typically wrappers for native
// objects. The objects are simply stored in the list without any additional
// encoding.
//
// The binary format must match the deserialization code in paint.cc.
// C++ unit tests access this.
@pragma('vm:entry-point')
final ByteData _data = ByteData(_kDataByteCount);
static const int _kIsAntiAliasIndex = 0;
static const int _kColorIndex = 1;
static const int _kBlendModeIndex = 2;
static const int _kStyleIndex = 3;
static const int _kStrokeWidthIndex = 4;
static const int _kStrokeCapIndex = 5;
static const int _kStrokeJoinIndex = 6;
static const int _kStrokeMiterLimitIndex = 7;
static const int _kFilterQualityIndex = 8;
static const int _kMaskFilterIndex = 9;
static const int _kMaskFilterBlurStyleIndex = 10;
static const int _kMaskFilterSigmaIndex = 11;
static const int _kInvertColorIndex = 12;
static const int _kDitherIndex = 13;
static const int _kIsAntiAliasOffset = _kIsAntiAliasIndex << 2;
static const int _kColorOffset = _kColorIndex << 2;
static const int _kBlendModeOffset = _kBlendModeIndex << 2;
static const int _kStyleOffset = _kStyleIndex << 2;
static const int _kStrokeWidthOffset = _kStrokeWidthIndex << 2;
static const int _kStrokeCapOffset = _kStrokeCapIndex << 2;
static const int _kStrokeJoinOffset = _kStrokeJoinIndex << 2;
static const int _kStrokeMiterLimitOffset = _kStrokeMiterLimitIndex << 2;
static const int _kFilterQualityOffset = _kFilterQualityIndex << 2;
static const int _kMaskFilterOffset = _kMaskFilterIndex << 2;
static const int _kMaskFilterBlurStyleOffset = _kMaskFilterBlurStyleIndex << 2;
static const int _kMaskFilterSigmaOffset = _kMaskFilterSigmaIndex << 2;
static const int _kInvertColorOffset = _kInvertColorIndex << 2;
static const int _kDitherOffset = _kDitherIndex << 2;
// If you add more fields, remember to update _kDataByteCount.
static const int _kDataByteCount = 56;
// Binary format must match the deserialization code in paint.cc.
// C++ unit tests access this.
@pragma('vm:entry-point')
List<Object?>? _objects;
List<Object?> _ensureObjectsInitialized() {
return _objects ??= List<Object?>.filled(_kObjectCount, null);
}
static const int _kShaderIndex = 0;
static const int _kColorFilterIndex = 1;
static const int _kImageFilterIndex = 2;
static const int _kObjectCount = 3; // Must be one larger than the largest index.
/// Whether to apply anti-aliasing to lines and images drawn on the
/// canvas.
///
/// Defaults to true.
bool get isAntiAlias {
return _data.getInt32(_kIsAntiAliasOffset, _kFakeHostEndian) == 0;
}
set isAntiAlias(bool value) {
// We encode true as zero and false as one because the default value, which
// we always encode as zero, is true.
final int encoded = value ? 0 : 1;
_data.setInt32(_kIsAntiAliasOffset, encoded, _kFakeHostEndian);
}
// Must be kept in sync with the default in paint.cc.
static const int _kColorDefault = 0xFF000000;
/// The color to use when stroking or filling a shape.
///
/// Defaults to opaque black.
///
/// See also:
///
/// * [style], which controls whether to stroke or fill (or both).
/// * [colorFilter], which overrides [color].
/// * [shader], which overrides [color] with more elaborate effects.
///
/// This color is not used when compositing. To colorize a layer, use
/// [colorFilter].
Color get color {
final int encoded = _data.getInt32(_kColorOffset, _kFakeHostEndian);
return Color(encoded ^ _kColorDefault);
}
set color(Color value) {
final int encoded = value.value ^ _kColorDefault;
_data.setInt32(_kColorOffset, encoded, _kFakeHostEndian);
}
// Must be kept in sync with the default in paint.cc.
static final int _kBlendModeDefault = BlendMode.srcOver.index;
/// A blend mode to apply when a shape is drawn or a layer is composited.
///
/// The source colors are from the shape being drawn (e.g. from
/// [Canvas.drawPath]) or layer being composited (the graphics that were drawn
/// between the [Canvas.saveLayer] and [Canvas.restore] calls), after applying
/// the [colorFilter], if any.
///
/// The destination colors are from the background onto which the shape or
/// layer is being composited.
///
/// Defaults to [BlendMode.srcOver].
///
/// See also:
///
/// * [Canvas.saveLayer], which uses its [Paint]'s [blendMode] to composite
/// the layer when [Canvas.restore] is called.
/// * [BlendMode], which discusses the user of [Canvas.saveLayer] with
/// [blendMode].
BlendMode get blendMode {
final int encoded = _data.getInt32(_kBlendModeOffset, _kFakeHostEndian);
return BlendMode.values[encoded ^ _kBlendModeDefault];
}
set blendMode(BlendMode value) {
final int encoded = value.index ^ _kBlendModeDefault;
_data.setInt32(_kBlendModeOffset, encoded, _kFakeHostEndian);
}
/// Whether to paint inside shapes, the edges of shapes, or both.
///
/// Defaults to [PaintingStyle.fill].
PaintingStyle get style {
return PaintingStyle.values[_data.getInt32(_kStyleOffset, _kFakeHostEndian)];
}
set style(PaintingStyle value) {
final int encoded = value.index;
_data.setInt32(_kStyleOffset, encoded, _kFakeHostEndian);
}
/// How wide to make edges drawn when [style] is set to
/// [PaintingStyle.stroke]. The width is given in logical pixels measured in
/// the direction orthogonal to the direction of the path.
///
/// Defaults to 0.0, which correspond to a hairline width.
double get strokeWidth {
return _data.getFloat32(_kStrokeWidthOffset, _kFakeHostEndian);
}
set strokeWidth(double value) {
final double encoded = value;
_data.setFloat32(_kStrokeWidthOffset, encoded, _kFakeHostEndian);
}
/// The kind of finish to place on the end of lines drawn when
/// [style] is set to [PaintingStyle.stroke].
///
/// Defaults to [StrokeCap.butt], i.e. no caps.
StrokeCap get strokeCap {
return StrokeCap.values[_data.getInt32(_kStrokeCapOffset, _kFakeHostEndian)];
}
set strokeCap(StrokeCap value) {
final int encoded = value.index;
_data.setInt32(_kStrokeCapOffset, encoded, _kFakeHostEndian);
}
/// The kind of finish to place on the joins between segments.
///
/// This applies to paths drawn when [style] is set to [PaintingStyle.stroke],
/// It does not apply to points drawn as lines with [Canvas.drawPoints].
///
/// Defaults to [StrokeJoin.miter], i.e. sharp corners.
///
/// Some examples of joins:
///
/// {@animation 300 300 https://flutter.github.io/assets-for-api-docs/assets/dart-ui/miter_4_join.mp4}
///
/// {@animation 300 300 https://flutter.github.io/assets-for-api-docs/assets/dart-ui/round_join.mp4}
///
/// {@animation 300 300 https://flutter.github.io/assets-for-api-docs/assets/dart-ui/bevel_join.mp4}
///
/// The centers of the line segments are colored in the diagrams above to
/// highlight the joins, but in normal usage the join is the same color as the
/// line.
///
/// See also:
///
/// * [strokeMiterLimit] to control when miters are replaced by bevels when
/// this is set to [StrokeJoin.miter].
/// * [strokeCap] to control what is drawn at the ends of the stroke.
/// * [StrokeJoin] for the definitive list of stroke joins.
StrokeJoin get strokeJoin {
return StrokeJoin.values[_data.getInt32(_kStrokeJoinOffset, _kFakeHostEndian)];
}
set strokeJoin(StrokeJoin value) {
final int encoded = value.index;
_data.setInt32(_kStrokeJoinOffset, encoded, _kFakeHostEndian);
}
// Must be kept in sync with the default in paint.cc.
static const double _kStrokeMiterLimitDefault = 4.0;
/// The limit for miters to be drawn on segments when the join is set to
/// [StrokeJoin.miter] and the [style] is set to [PaintingStyle.stroke]. If
/// this limit is exceeded, then a [StrokeJoin.bevel] join will be drawn
/// instead. This may cause some 'popping' of the corners of a path if the
/// angle between line segments is animated, as seen in the diagrams below.
///
/// This limit is expressed as a limit on the length of the miter.
///
/// Defaults to 4.0. Using zero as a limit will cause a [StrokeJoin.bevel]
/// join to be used all the time.
///
/// {@animation 300 300 https://flutter.github.io/assets-for-api-docs/assets/dart-ui/miter_0_join.mp4}
///
/// {@animation 300 300 https://flutter.github.io/assets-for-api-docs/assets/dart-ui/miter_4_join.mp4}
///
/// {@animation 300 300 https://flutter.github.io/assets-for-api-docs/assets/dart-ui/miter_6_join.mp4}
///
/// The centers of the line segments are colored in the diagrams above to
/// highlight the joins, but in normal usage the join is the same color as the
/// line.
///
/// See also:
///
/// * [strokeJoin] to control the kind of finish to place on the joins
/// between segments.
/// * [strokeCap] to control what is drawn at the ends of the stroke.
double get strokeMiterLimit {
return _data.getFloat32(_kStrokeMiterLimitOffset, _kFakeHostEndian);
}
set strokeMiterLimit(double value) {
final double encoded = value - _kStrokeMiterLimitDefault;
_data.setFloat32(_kStrokeMiterLimitOffset, encoded, _kFakeHostEndian);
}
/// A mask filter (for example, a blur) to apply to a shape after it has been
/// drawn but before it has been composited into the image.
///
/// See [MaskFilter] for details.
MaskFilter? get maskFilter {
switch (_data.getInt32(_kMaskFilterOffset, _kFakeHostEndian)) {
case MaskFilter._TypeNone:
return null;
case MaskFilter._TypeBlur:
return MaskFilter.blur(
BlurStyle.values[_data.getInt32(_kMaskFilterBlurStyleOffset, _kFakeHostEndian)],
_data.getFloat32(_kMaskFilterSigmaOffset, _kFakeHostEndian),
);
}
return null;
}
set maskFilter(MaskFilter? value) {
if (value == null) {
_data.setInt32(_kMaskFilterOffset, MaskFilter._TypeNone, _kFakeHostEndian);
_data.setInt32(_kMaskFilterBlurStyleOffset, 0, _kFakeHostEndian);
_data.setFloat32(_kMaskFilterSigmaOffset, 0.0, _kFakeHostEndian);
} else {
// For now we only support one kind of MaskFilter, so we don't need to
// check what the type is if it's not null.
_data.setInt32(_kMaskFilterOffset, MaskFilter._TypeBlur, _kFakeHostEndian);
_data.setInt32(_kMaskFilterBlurStyleOffset, value._style.index, _kFakeHostEndian);
_data.setFloat32(_kMaskFilterSigmaOffset, value._sigma, _kFakeHostEndian);
}
}
/// Controls the performance vs quality trade-off to use when sampling bitmaps,
/// as with an [ImageShader], or when drawing images, as with [Canvas.drawImage],
/// [Canvas.drawImageRect], [Canvas.drawImageNine] or [Canvas.drawAtlas].
///
/// Defaults to [FilterQuality.none].
// TODO(ianh): verify that the image drawing methods actually respect this
FilterQuality get filterQuality {
return FilterQuality.values[_data.getInt32(_kFilterQualityOffset, _kFakeHostEndian)];
}
set filterQuality(FilterQuality value) {
final int encoded = value.index;
_data.setInt32(_kFilterQualityOffset, encoded, _kFakeHostEndian);
}
/// The shader to use when stroking or filling a shape.
///
/// When this is null, the [color] is used instead.
///
/// See also:
///
/// * [Gradient], a shader that paints a color gradient.
/// * [ImageShader], a shader that tiles an [Image].
/// * [colorFilter], which overrides [shader].
/// * [color], which is used if [shader] and [colorFilter] are null.
Shader? get shader {
return _objects?[_kShaderIndex] as Shader?;
}
set shader(Shader? value) {
assert(() {
assert(
value == null || !value.debugDisposed,
'Attempted to set a disposed shader to $this',
);
return true;
}());
assert(() {
if (value is FragmentShader) {
if (!value._validateSamplers()) {
throw Exception('Invalid FragmentShader ${value._debugName ?? ''}: missing sampler');
}
}
return true;
}());
_ensureObjectsInitialized()[_kShaderIndex] = value;
}
/// A color filter to apply when a shape is drawn or when a layer is
/// composited.
///
/// See [ColorFilter] for details.
///
/// When a shape is being drawn, [colorFilter] overrides [color] and [shader].
ColorFilter? get colorFilter {
final _ColorFilter? nativeFilter = _objects?[_kColorFilterIndex] as _ColorFilter?;
return nativeFilter?.creator;
}
set colorFilter(ColorFilter? value) {
final _ColorFilter? nativeFilter = value?._toNativeColorFilter();
if (nativeFilter == null) {
if (_objects != null) {
_objects![_kColorFilterIndex] = null;
}
} else {
_ensureObjectsInitialized()[_kColorFilterIndex] = nativeFilter;
}
}
/// The [ImageFilter] to use when drawing raster images.
///
/// For example, to blur an image using [Canvas.drawImage], apply an
/// [ImageFilter.blur]:
///
/// ```dart
/// void paint(Canvas canvas, Size size) {
/// canvas.drawImage(
/// _image,
/// ui.Offset.zero,
/// Paint()..imageFilter = ui.ImageFilter.blur(sigmaX: 0.5, sigmaY: 0.5),
/// );
/// }
/// ```
///
/// See also:
///
/// * [MaskFilter], which is used for drawing geometry.
ImageFilter? get imageFilter {
final _ImageFilter? nativeFilter = _objects?[_kImageFilterIndex] as _ImageFilter?;
return nativeFilter?.creator;
}
set imageFilter(ImageFilter? value) {
if (value == null) {
if (_objects != null) {
_objects![_kImageFilterIndex] = null;
}
} else {
final List<Object?> objects = _ensureObjectsInitialized();
final _ImageFilter? imageFilter = objects[_kImageFilterIndex] as _ImageFilter?;
if (imageFilter?.creator != value) {
objects[_kImageFilterIndex] = value._toNativeImageFilter();
}
}
}
/// Whether the colors of the image are inverted when drawn.
///
/// Inverting the colors of an image applies a new color filter that will
/// be composed with any user provided color filters. This is primarily
/// used for implementing smart invert on iOS.
bool get invertColors {
return _data.getInt32(_kInvertColorOffset, _kFakeHostEndian) == 1;
}
set invertColors(bool value) {
_data.setInt32(_kInvertColorOffset, value ? 1 : 0, _kFakeHostEndian);
}
bool get _dither {
return _data.getInt32(_kDitherOffset, _kFakeHostEndian) == 1;
}
set _dither(bool value) {
_data.setInt32(_kDitherOffset, value ? 1 : 0, _kFakeHostEndian);
}
/// Whether to dither the output when drawing some elements such as gradients.
///
/// It is not expected that this flag will be used in the future; please leave
/// feedback in <https://github.com/flutter/flutter/issues/112498> if there is
/// a use case for this flag to remain long term.
@Deprecated(
'Dithering is now enabled by default on some elements (such as gradients) '
'and further support for dithering is expected to be handled by custom '
'shaders, so this flag is being removed: '
'https://github.com/flutter/flutter/issues/112498.'
'This feature was deprecated after 3.14.0-0.1.pre.'
)
static bool enableDithering = true;
@override
String toString() {
if (const bool.fromEnvironment('dart.vm.product')) {
return super.toString();
}
final StringBuffer result = StringBuffer();
String semicolon = '';
result.write('Paint(');
if (style == PaintingStyle.stroke) {
result.write('$style');
if (strokeWidth != 0.0) {
result.write(' ${strokeWidth.toStringAsFixed(1)}');
} else {
result.write(' hairline');
}
if (strokeCap != StrokeCap.butt) {
result.write(' $strokeCap');
}
if (strokeJoin == StrokeJoin.miter) {
if (strokeMiterLimit != _kStrokeMiterLimitDefault) {
result.write(' $strokeJoin up to ${strokeMiterLimit.toStringAsFixed(1)}');
}
} else {
result.write(' $strokeJoin');
}
semicolon = '; ';
}
if (isAntiAlias != true) {
result.write('${semicolon}antialias off');
semicolon = '; ';
}
if (color != const Color(_kColorDefault)) {
result.write('$semicolon$color');
semicolon = '; ';
}
if (blendMode.index != _kBlendModeDefault) {
result.write('$semicolon$blendMode');
semicolon = '; ';
}
if (colorFilter != null) {
result.write('${semicolon}colorFilter: $colorFilter');
semicolon = '; ';
}
if (maskFilter != null) {
result.write('${semicolon}maskFilter: $maskFilter');
semicolon = '; ';
}
if (filterQuality != FilterQuality.none) {
result.write('${semicolon}filterQuality: $filterQuality');
semicolon = '; ';
}
if (shader != null) {
result.write('${semicolon}shader: $shader');
semicolon = '; ';
}
if (imageFilter != null) {
result.write('${semicolon}imageFilter: $imageFilter');
semicolon = '; ';
}
if (invertColors) {
result.write('${semicolon}invert: $invertColors');
}
if (_dither) {
result.write('${semicolon}dither: $_dither');
}
result.write(')');
return result.toString();
}
}
/// The color space describes the colors that are available to an [Image].
///
/// This value can help decide which [ImageByteFormat] to use with
/// [Image.toByteData]. Images that are in the [extendedSRGB] color space
/// should use something like [ImageByteFormat.rawExtendedRgba128] so that
/// colors outside of the sRGB gamut aren't lost.
///
/// This is also the result of [Image.colorSpace].
///
/// See also: https://en.wikipedia.org/wiki/Color_space
enum ColorSpace {
/// The sRGB color space.
///
/// You may know this as the standard color space for the web or the color
/// space of non-wide-gamut Flutter apps.
///
/// See also: https://en.wikipedia.org/wiki/SRGB
sRGB,
/// A color space that is backwards compatible with sRGB but can represent
/// colors outside of that gamut with values outside of [0..1]. In order to
/// see the extended values an [ImageByteFormat] like
/// [ImageByteFormat.rawExtendedRgba128] must be used.
extendedSRGB,
}
/// The format in which image bytes should be returned when using
/// [Image.toByteData].
// We do not expect to add more encoding formats to the ImageByteFormat enum,
// considering the binary size of the engine after LTO optimization. You can
// use the third-party pure dart image library to encode other formats.
// See: https://github.com/flutter/flutter/issues/16635 for more details.
enum ImageByteFormat {
/// Raw RGBA format.
///
/// Unencoded bytes, in RGBA row-primary form with premultiplied alpha, 8 bits per channel.
rawRgba,
/// Raw straight RGBA format.
///
/// Unencoded bytes, in RGBA row-primary form with straight alpha, 8 bits per channel.
rawStraightRgba,
/// Raw unmodified format.
///
/// Unencoded bytes, in the image's existing format. For example, a grayscale
/// image may use a single 8-bit channel for each pixel.
rawUnmodified,
/// Raw extended range RGBA format.
///
/// Unencoded bytes, in RGBA row-primary form with straight alpha, 32 bit
/// float (IEEE 754 binary32) per channel.
///
/// Example usage:
///
/// ```dart
/// import 'dart:ui' as ui;
/// import 'dart:typed_data';
///
/// Future<Map<String, double>> getFirstPixel(ui.Image image) async {
/// final ByteData data =
/// (await image.toByteData(format: ui.ImageByteFormat.rawExtendedRgba128))!;
/// final Float32List floats = Float32List.view(data.buffer);
/// return <String, double>{
/// 'r': floats[0],
/// 'g': floats[1],
/// 'b': floats[2],
/// 'a': floats[3],
/// };
/// }
/// ```
rawExtendedRgba128,
/// PNG format.
///
/// A loss-less compression format for images. This format is well suited for
/// images with hard edges, such as screenshots or sprites, and images with
/// text. Transparency is supported. The PNG format supports images up to
/// 2,147,483,647 pixels in either dimension, though in practice available
/// memory provides a more immediate limitation on maximum image size.
///
/// PNG images normally use the `.png` file extension and the `image/png` MIME
/// type.
///
/// See also:
///
/// * <https://en.wikipedia.org/wiki/Portable_Network_Graphics>, the Wikipedia page on PNG.
/// * <https://tools.ietf.org/rfc/rfc2083.txt>, the PNG standard.
png,
}
/// The format of pixel data given to [decodeImageFromPixels].
enum PixelFormat {
/// Each pixel is 32 bits, with the highest 8 bits encoding red, the next 8
/// bits encoding green, the next 8 bits encoding blue, and the lowest 8 bits
/// encoding alpha. Premultiplied alpha is used.
rgba8888,
/// Each pixel is 32 bits, with the highest 8 bits encoding blue, the next 8
/// bits encoding green, the next 8 bits encoding red, and the lowest 8 bits
/// encoding alpha. Premultiplied alpha is used.
bgra8888,
/// Each pixel is 128 bits, where each color component is a 32 bit float that
/// is normalized across the sRGB gamut. The first float is the red
/// component, followed by: green, blue and alpha. Premultiplied alpha isn't
/// used, matching [ImageByteFormat.rawExtendedRgba128].
rgbaFloat32,
}
/// Signature for [Image] lifecycle events.
typedef ImageEventCallback = void Function(Image image);
/// Opaque handle to raw decoded image data (pixels).
///
/// To obtain an [Image] object, use the [ImageDescriptor] API.
///
/// To draw an [Image], use one of the methods on the [Canvas] class, such as
/// [Canvas.drawImage].
///
/// A class or method that receives an image object must call [dispose] on the
/// handle when it is no longer needed. To create a shareable reference to the
/// underlying image, call [clone]. The method or object that receives
/// the new instance will then be responsible for disposing it, and the
/// underlying image itself will be disposed when all outstanding handles are
/// disposed.
///
/// If `dart:ui` passes an `Image` object and the recipient wishes to share
/// that handle with other callers, [clone] must be called _before_ [dispose].
/// A handle that has been disposed cannot create new handles anymore.
///
/// See also:
///
/// * [Image](https://api.flutter.dev/flutter/widgets/Image-class.html), the class in the [widgets] library.
/// * [ImageDescriptor], which allows reading information about the image and
/// creating a codec to decode it.
/// * [instantiateImageCodec], a utility method that wraps [ImageDescriptor].
class Image {
Image._(this._image, this.width, this.height) {
assert(() {
_debugStack = StackTrace.current;
return true;
}());
_image._handles.add(this);
onCreate?.call(this);
}
// C++ unit tests access this.
@pragma('vm:entry-point')
final _Image _image;
/// A callback that is invoked to report an image creation.
///
/// It's preferred to use [MemoryAllocations] in flutter/foundation.dart
/// than to use [onCreate] directly because [MemoryAllocations]
/// allows multiple callbacks.
static ImageEventCallback? onCreate;
/// A callback that is invoked to report the image disposal.
///
/// It's preferred to use [MemoryAllocations] in flutter/foundation.dart
/// than to use [onDispose] directly because [MemoryAllocations]
/// allows multiple callbacks.
static ImageEventCallback? onDispose;
StackTrace? _debugStack;
/// The number of image pixels along the image's horizontal axis.
final int width;
/// The number of image pixels along the image's vertical axis.
final int height;
bool _disposed = false;
/// Release this handle's claim on the underlying Image. This handle is no
/// longer usable after this method is called.
///
/// Once all outstanding handles have been disposed, the underlying image will
/// be disposed as well.
///
/// In debug mode, [debugGetOpenHandleStackTraces] will return a list of
/// [StackTrace] objects from all open handles' creation points. This is
/// useful when trying to determine what parts of the program are keeping an
/// image resident in memory.
void dispose() {
onDispose?.call(this);
assert(!_disposed && !_image._disposed);
assert(_image._handles.contains(this));
_disposed = true;
final bool removed = _image._handles.remove(this);
assert(removed);
if (_image._handles.isEmpty) {
_image.dispose();
}
}
/// Whether this reference to the underlying image is [dispose]d.
///
/// This only returns a valid value if asserts are enabled, and must not be
/// used otherwise.
bool get debugDisposed {
bool? disposed;
assert(() {
disposed = _disposed;
return true;
}());
return disposed ?? (throw StateError('Image.debugDisposed is only available when asserts are enabled.'));
}
/// Converts the [Image] object into a byte array.
///
/// The [format] argument specifies the format in which the bytes will be
/// returned.
///
/// Using [ImageByteFormat.rawRgba] on an image in the color space
/// [ColorSpace.extendedSRGB] will result in the gamut being squished to fit
/// into the sRGB gamut, resulting in the loss of wide-gamut colors.
///
/// Returns a future that completes with the binary image data or an error
/// if encoding fails.
// We do not expect to add more encoding formats to the ImageByteFormat enum,
// considering the binary size of the engine after LTO optimization. You can
// use the third-party pure dart image library to encode other formats.
// See: https://github.com/flutter/flutter/issues/16635 for more details.
Future<ByteData?> toByteData({ImageByteFormat format = ImageByteFormat.rawRgba}) {
assert(!_disposed && !_image._disposed);
return _image.toByteData(format: format);
}
/// The color space that is used by the [Image]'s colors.
///
/// This value is a consequence of how the [Image] has been created. For
/// example, loading a PNG that is in the Display P3 color space will result
/// in a [ColorSpace.extendedSRGB] image.
///
/// On rendering backends that don't support wide gamut colors (anything but
/// iOS impeller), wide gamut images will still report [ColorSpace.sRGB] if
/// rendering wide gamut colors isn't supported.
// Note: The docstring will become outdated as new platforms support wide
// gamut color, please keep it up to date.
ColorSpace get colorSpace {
final int colorSpaceValue = _image.colorSpace;
switch (colorSpaceValue) {
case 0:
return ColorSpace.sRGB;
case 1:
return ColorSpace.extendedSRGB;
default:
throw UnsupportedError('Unrecognized color space: $colorSpaceValue');
}
}
/// If asserts are enabled, returns the [StackTrace]s of each open handle from
/// [clone], in creation order.
///
/// If asserts are disabled, this method always returns null.
List<StackTrace>? debugGetOpenHandleStackTraces() {
List<StackTrace>? stacks;
assert(() {
stacks = _image._handles.map((Image handle) => handle._debugStack!).toList();
return true;
}());
return stacks;
}
/// Creates a disposable handle to this image.
///
/// Holders of an [Image] must dispose of the image when they no longer need
/// to access it or draw it. However, once the underlying image is disposed,
/// it is no longer possible to use it. If a holder of an image needs to share
/// access to that image with another object or method, [clone] creates a
/// duplicate handle. The underlying image will only be disposed once all
/// outstanding handles are disposed. This allows for safe sharing of image
/// references while still disposing of the underlying resources when all
/// consumers are finished.
///
/// It is safe to pass an [Image] handle to another object or method if the
/// current holder no longer needs it.
///
/// To check whether two [Image] references are referring to the same
/// underlying image memory, use [isCloneOf] rather than the equality operator
/// or [identical].
///
/// The following example demonstrates valid usage.
///
/// ```dart
/// import 'dart:async';
/// import 'dart:typed_data';
/// import 'dart:ui';
///
/// Future<Image> _loadImage(int width, int height) {
/// final Completer<Image> completer = Completer<Image>();
/// decodeImageFromPixels(
/// Uint8List.fromList(List<int>.filled(width * height * 4, 0xFF)),
/// width,
/// height,
/// PixelFormat.rgba8888,
/// // Don't worry about disposing or cloning this image - responsibility
/// // is transferred to the caller, and that is safe since this method
/// // will not touch it again.
/// (Image image) => completer.complete(image),
/// );
/// return completer.future;
/// }
///
/// Future<void> main() async {
/// final Image image = await _loadImage(5, 5);
/// // Make sure to clone the image, because MyHolder might dispose it
/// // and we need to access it again.
/// final MyImageHolder holder = MyImageHolder(image.clone());
/// final MyImageHolder holder2 = MyImageHolder(image.clone());
/// // Now we dispose it because we won't need it again.
/// image.dispose();
///
/// final PictureRecorder recorder = PictureRecorder();
/// final Canvas canvas = Canvas(recorder);
///
/// holder.draw(canvas);
/// holder.dispose();
///
/// canvas.translate(50, 50);
/// holder2.draw(canvas);
/// holder2.dispose();
/// }
///
/// class MyImageHolder {
/// MyImageHolder(this.image);
///
/// final Image image;
///
/// void draw(Canvas canvas) {
/// canvas.drawImage(image, Offset.zero, Paint());
/// }
///
/// void dispose() => image.dispose();
/// }
/// ```
///
/// The returned object behaves identically to this image. Calling
/// [dispose] on it will only dispose the underlying native resources if it
/// is the last remaining handle.
Image clone() {
if (_disposed) {
throw StateError(
'Cannot clone a disposed image.\n'
'The clone() method of a previously-disposed Image was called. Once an '
'Image object has been disposed, it can no longer be used to create '
'handles, as the underlying data may have been released.'
);
}
assert(!_image._disposed);
return Image._(_image, width, height);
}
/// Returns true if `other` is a [clone] of this and thus shares the same
/// underlying image memory, even if this or `other` is [dispose]d.
///
/// This method may return false for two images that were decoded from the
/// same underlying asset, if they are not sharing the same memory. For
/// example, if the same file is decoded using [instantiateImageCodec] twice,
/// or the same bytes are decoded using [decodeImageFromPixels] twice, there
/// will be two distinct [Image]s that render the same but do not share
/// underlying memory, and so will not be treated as clones of each other.
bool isCloneOf(Image other) => other._image == _image;
@override
String toString() => _image.toString();
}
@pragma('vm:entry-point')
base class _Image extends NativeFieldWrapperClass1 {
// This class is created by the engine, and should not be instantiated
// or extended directly.
//
// _Images are always handed out wrapped in [Image]s. To create an [Image],
// use the ImageDescriptor API.
@pragma('vm:entry-point')
_Image._();
@Native<Int32 Function(Pointer<Void>)>(symbol: 'Image::width', isLeaf: true)
external int get width;
@Native<Int32 Function(Pointer<Void>)>(symbol: 'Image::height', isLeaf: true)
external int get height;
Future<ByteData?> toByteData({ImageByteFormat format = ImageByteFormat.rawRgba}) {
return _futurize((_Callback<ByteData> callback) {
return _toByteData(format.index, (Uint8List? encoded) {
callback(encoded!.buffer.asByteData());
});
});
}
/// Returns an error message on failure, null on success.
@Native<Handle Function(Pointer<Void>, Int32, Handle)>(symbol: 'Image::toByteData')
external String? _toByteData(int format, _Callback<Uint8List?> callback);
bool _disposed = false;
void dispose() {
assert(!_disposed);
assert(
_handles.isEmpty,
'Attempted to dispose of an Image object that has ${_handles.length} '
'open handles.\n'
'If you see this, it is a bug in dart:ui. Please file an issue at '
'https://github.com/flutter/flutter/issues/new.',
);
_disposed = true;
_dispose();
}
/// This can't be a leaf call because the native function calls Dart API
/// (Dart_SetNativeInstanceField).
@Native<Void Function(Pointer<Void>)>(symbol: 'Image::dispose')
external void _dispose();
final Set<Image> _handles = <Image>{};
@Native<Int32 Function(Pointer<Void>)>(symbol: 'Image::colorSpace')
external int get colorSpace;
@override
String toString() => '[$width\u00D7$height]';
}
/// Callback signature for [decodeImageFromList].
typedef ImageDecoderCallback = void Function(Image result);
/// Information for a single frame of an animation.
///
/// To obtain an instance of the [FrameInfo] interface, see
/// [Codec.getNextFrame].
///
/// The recipient of an instance of this class is responsible for calling
/// [Image.dispose] on [image]. To share the image with other interested
/// parties, use [Image.clone]. If the [FrameInfo] object itself is passed to
/// another method or object, that method or object must assume it is
/// responsible for disposing the image when done, and the passer must not
/// access the [image] after that point.
///
/// For example, the following code sample is incorrect:
///
/// ```dart
/// /// BAD
/// Future<void> nextFrameRoutine(ui.Codec codec) async {
/// final ui.FrameInfo frameInfo = await codec.getNextFrame();
/// _cacheImage(frameInfo);
/// // ERROR - _cacheImage is now responsible for disposing the image, and
/// // the image may not be available any more for this drawing routine.
/// _drawImage(frameInfo);
/// // ERROR again - the previous methods might or might not have created
/// // handles to the image.
/// frameInfo.image.dispose();
/// }
/// ```
///
/// Correct usage is:
///
/// ```dart
/// /// GOOD
/// Future<void> nextFrameRoutine(ui.Codec codec) async {
/// final ui.FrameInfo frameInfo = await codec.getNextFrame();
/// _cacheImage(frameInfo.image.clone(), frameInfo.duration);
/// _drawImage(frameInfo.image.clone(), frameInfo.duration);
/// // This method is done with its handle, and has passed handles to its
/// // clients already.
/// // The image will live until those clients dispose of their handles, and
/// // this one must not be disposed since it will not be used again.
/// frameInfo.image.dispose();
/// }
/// ```
class FrameInfo {
/// This class is created by the engine, and should not be instantiated
/// or extended directly.
///
/// To obtain an instance of the [FrameInfo] interface, see
/// [Codec.getNextFrame].
FrameInfo._({required this.duration, required this.image});
/// The duration this frame should be shown.
///
/// A zero duration indicates that the frame should be shown indefinitely.
final Duration duration;
/// The [Image] object for this frame.
///
/// This object must be disposed by the recipient of this frame info.
///
/// To share this image with other interested parties, use [Image.clone].
final Image image;
}
/// A handle to an image codec.
///
/// This class is created by the engine, and should not be instantiated
/// or extended directly.
///
/// To obtain an instance of the [Codec] interface, see
/// [instantiateImageCodec].
abstract class Codec {
/// Number of frames in this image.
int get frameCount;
/// Number of times to repeat the animation.
///
/// * 0 when the animation should be played once.
/// * -1 for infinity repetitions.
int get repetitionCount;
/// Fetches the next animation frame.
///
/// Wraps back to the first frame after returning the last frame.
///
/// The returned future can complete with an error if the decoding has failed.
///
/// The caller of this method is responsible for disposing the
/// [FrameInfo.image] on the returned object.
Future<FrameInfo> getNextFrame();
/// Release the resources used by this object. The object is no longer usable
/// after this method is called.
///
/// This can't be a leaf call because the native function calls Dart API
/// (Dart_SetNativeInstanceField).
void dispose();
}
base class _NativeCodec extends NativeFieldWrapperClass1 implements Codec {
//
// This class is created by the engine, and should not be instantiated
// or extended directly.
//
// To obtain an instance of the [Codec] interface, see
// [instantiateImageCodec].
_NativeCodec._();
int? _cachedFrameCount;
@override
int get frameCount => _cachedFrameCount ??= _frameCount;
@Native<Int32 Function(Pointer<Void>)>(symbol: 'Codec::frameCount', isLeaf: true)
external int get _frameCount;
int? _cachedRepetitionCount;
@override
int get repetitionCount => _cachedRepetitionCount ??= _repetitionCount;
@Native<Int32 Function(Pointer<Void>)>(symbol: 'Codec::repetitionCount', isLeaf: true)
external int get _repetitionCount;
@override
Future<FrameInfo> getNextFrame() async {
final Completer<FrameInfo> completer = Completer<FrameInfo>.sync();
final String? error = _getNextFrame((_Image? image, int durationMilliseconds, String decodeError) {
if (image == null) {
if (decodeError.isEmpty) {
decodeError = 'Codec failed to produce an image, possibly due to invalid image data.';
}
completer.completeError(Exception(decodeError));
} else {
completer.complete(FrameInfo._(
image: Image._(image, image.width, image.height),
duration: Duration(milliseconds: durationMilliseconds),
));
}
});
if (error != null) {
throw Exception(error);
}
return completer.future;
}
/// Returns an error message on failure, null on success.
@Native<Handle Function(Pointer<Void>, Handle)>(symbol: 'Codec::getNextFrame')
external String? _getNextFrame(void Function(_Image?, int, String) callback);
@override
@Native<Void Function(Pointer<Void>)>(symbol: 'Codec::dispose')
external void dispose();
}
/// Instantiates an image [Codec].
///
/// This method is a convenience wrapper around the [ImageDescriptor] API, and
/// using [ImageDescriptor] directly is preferred since it allows the caller to
/// make better determinations about how and whether to use the `targetWidth`
/// and `targetHeight` parameters.
///
/// The `list` parameter is the binary image data (e.g a PNG or GIF binary data).
/// The data can be for either static or animated images. The following image
/// formats are supported:
// Update this list when changing the list of supported codecs.
/// {@template dart.ui.imageFormats}
/// JPEG, PNG, GIF, Animated GIF, WebP, Animated WebP, BMP, and WBMP. Additional
/// formats may be supported by the underlying platform. Flutter will
/// attempt to call platform API to decode unrecognized formats, and if the
/// platform API supports decoding the image Flutter will be able to render it.
/// {@endtemplate}
///
/// The `targetWidth` and `targetHeight` arguments specify the size of the
/// output image, in image pixels. If they are not equal to the intrinsic
/// dimensions of the image, then the image will be scaled after being decoded.
/// If the `allowUpscaling` parameter is not set to true, both dimensions will
/// be capped at the intrinsic dimensions of the image, even if only one of
/// them would have exceeded those intrinsic dimensions. If exactly one of these
/// two arguments is specified, then the aspect ratio will be maintained while
/// forcing the image to match the other given dimension. If neither is
/// specified, then the image maintains its intrinsic size.
///
/// Scaling the image to larger than its intrinsic size should usually be
/// avoided, since it causes the image to use more memory than necessary.
/// Instead, prefer scaling the [Canvas] transform. If the image must be scaled
/// up, the `allowUpscaling` parameter must be set to true.
///
/// The returned future can complete with an error if the image decoding has
/// failed.
Future<Codec> instantiateImageCodec(
Uint8List list, {
int? targetWidth,
int? targetHeight,
bool allowUpscaling = true,
}) async {
final ImmutableBuffer buffer = await ImmutableBuffer.fromUint8List(list);
return instantiateImageCodecFromBuffer(
buffer,
targetWidth: targetWidth,
targetHeight: targetHeight,
allowUpscaling: allowUpscaling,
);
}
/// Instantiates an image [Codec].
///
/// This method is a convenience wrapper around the [ImageDescriptor] API, and
/// using [ImageDescriptor] directly is preferred since it allows the caller to
/// make better determinations about how and whether to use the `targetWidth`
/// and `targetHeight` parameters.
///
/// The [buffer] parameter is the binary image data (e.g a PNG or GIF binary data).
/// The data can be for either static or animated images. The following image
/// formats are supported: {@macro dart.ui.imageFormats}
///
/// The [buffer] will be disposed by this method once the codec has been created,
/// so the caller must relinquish ownership of the [buffer] when they call this
/// method.
///
/// The [targetWidth] and [targetHeight] arguments specify the size of the
/// output image, in image pixels. If they are not equal to the intrinsic
/// dimensions of the image, then the image will be scaled after being decoded.
/// If the `allowUpscaling` parameter is not set to true, both dimensions will
/// be capped at the intrinsic dimensions of the image, even if only one of
/// them would have exceeded those intrinsic dimensions. If exactly one of these
/// two arguments is specified, then the aspect ratio will be maintained while
/// forcing the image to match the other given dimension. If neither is
/// specified, then the image maintains its intrinsic size.
///
/// Scaling the image to larger than its intrinsic size should usually be
/// avoided, since it causes the image to use more memory than necessary.
/// Instead, prefer scaling the [Canvas] transform. If the image must be scaled
/// up, the `allowUpscaling` parameter must be set to true.
///
/// The returned future can complete with an error if the image decoding has
/// failed.
///
/// ## Compatibility note on the web
///
/// When running Flutter on the web, only the CanvasKit renderer supports image
/// resizing capabilities (not the HTML renderer). So if image resizing is
/// critical to your use case, and you're deploying to the web, you should
/// build using the CanvasKit renderer.
Future<Codec> instantiateImageCodecFromBuffer(
ImmutableBuffer buffer, {
int? targetWidth,
int? targetHeight,
bool allowUpscaling = true,
}) {
return instantiateImageCodecWithSize(
buffer,
getTargetSize: (int intrinsicWidth, int intrinsicHeight) {
if (!allowUpscaling) {
if (targetWidth != null && targetWidth! > intrinsicWidth) {
targetWidth = intrinsicWidth;
}
if (targetHeight != null && targetHeight! > intrinsicHeight) {
targetHeight = intrinsicHeight;
}
}
return TargetImageSize(width: targetWidth, height: targetHeight);
},
);
}
/// Instantiates an image [Codec].
///
/// This method is a convenience wrapper around the [ImageDescriptor] API.
///
/// The [buffer] parameter is the binary image data (e.g a PNG or GIF binary
/// data). The data can be for either static or animated images. The following
/// image formats are supported: {@macro dart.ui.imageFormats}
///
/// The [buffer] will be disposed by this method once the codec has been
/// created, so the caller must relinquish ownership of the [buffer] when they
/// call this method.
///
/// The [getTargetSize] parameter, when specified, will be invoked and passed
/// the image's intrinsic size to determine the size to decode the image to.
/// The width and the height of the size it returns must be positive values
/// greater than or equal to 1, or null. It is valid to return a
/// [TargetImageSize] that specifies only one of `width` and `height` with the
/// other remaining null, in which case the omitted dimension will be scaled to
/// maintain the aspect ratio of the original dimensions. When both are null or
/// omitted, the image will be decoded at its native resolution (as will be the
/// case if the [getTargetSize] parameter is omitted).
///
/// Scaling the image to larger than its intrinsic size should usually be
/// avoided, since it causes the image to use more memory than necessary.
/// Instead, prefer scaling the [Canvas] transform.
///
/// The returned future can complete with an error if the image decoding has
/// failed.
///
/// ## Compatibility note on the web
///
/// When running Flutter on the web, only the CanvasKit renderer supports image
/// resizing capabilities (not the HTML renderer). So if image resizing is
/// critical to your use case, and you're deploying to the web, you should
/// build using the CanvasKit renderer.
Future<Codec> instantiateImageCodecWithSize(
ImmutableBuffer buffer, {
TargetImageSizeCallback? getTargetSize,
}) async {
getTargetSize ??= _getDefaultImageSize;
final ImageDescriptor descriptor = await ImageDescriptor.encoded(buffer);
try {
final TargetImageSize targetSize = getTargetSize(descriptor.width, descriptor.height);
assert(targetSize.width == null || targetSize.width! > 0);
assert(targetSize.height == null || targetSize.height! > 0);
return descriptor.instantiateCodec(
targetWidth: targetSize.width,
targetHeight: targetSize.height,
);
} finally {
buffer.dispose();
}
}
TargetImageSize _getDefaultImageSize(int intrinsicWidth, int intrinsicHeight) {
return const TargetImageSize();
}
/// Signature for a callback that determines the size to which an image should
/// be decoded given its intrinsic size.
///
/// See also:
///
/// * [instantiateImageCodecWithSize], which used this signature for its
/// `getTargetSize` argument.
typedef TargetImageSizeCallback = TargetImageSize Function(
int intrinsicWidth,
int intrinsicHeight,
);
/// A specification of the size to which an image should be decoded.
///
/// See also:
///
/// * [TargetImageSizeCallback], a callback that returns instances of this
/// class when consulted by image decoding methods such as
/// [instantiateImageCodecWithSize].
class TargetImageSize {
/// Creates a new instance of this class.
///
/// The `width` and `height` may both be null, but if they're non-null, they
/// must be positive.
const TargetImageSize({this.width, this.height})
: assert(width == null || width > 0),
assert(height == null || height > 0);
/// The width into which to load the image.
///
/// If this is non-null, the image will be decoded into the specified width.
/// If this is null and [height] is also null, the image will be decoded into
/// its intrinsic size. If this is null and [height] is non-null, the image
/// will be decoded into a width that maintains its intrinsic aspect ratio
/// while respecting the [height] value.
///
/// If this value is non-null, it must be positive.
final int? width;
/// The height into which to load the image.
///
/// If this is non-null, the image will be decoded into the specified height.
/// If this is null and [width] is also null, the image will be decoded into
/// its intrinsic size. If this is null and [width] is non-null, the image
/// will be decoded into a height that maintains its intrinsic aspect ratio
/// while respecting the [width] value.
///
/// If this value is non-null, it must be positive.
final int? height;
@override
String toString() => 'TargetImageSize($width x $height)';
}
/// Loads a single image frame from a byte array into an [Image] object.
///
/// This is a convenience wrapper around [instantiateImageCodec]. Prefer using
/// [instantiateImageCodec] which also supports multi frame images and offers
/// better error handling. This function swallows asynchronous errors.
void decodeImageFromList(Uint8List list, ImageDecoderCallback callback) {
_decodeImageFromListAsync(list, callback);
}
Future<void> _decodeImageFromListAsync(Uint8List list, ImageDecoderCallback callback) async {
final Codec codec = await instantiateImageCodec(list);
final FrameInfo frameInfo = await codec.getNextFrame();
callback(frameInfo.image);
}
/// Convert an array of pixel values into an [Image] object.
///
/// The `pixels` parameter is the pixel data. They are packed in bytes in the
/// order described by `format`, then grouped in rows, from left to right,
/// then top to bottom.
///
/// The `rowBytes` parameter is the number of bytes consumed by each row of
/// pixels in the data buffer. If unspecified, it defaults to `width` multiplied
/// by the number of bytes per pixel in the provided `format`.
///
/// The `targetWidth` and `targetHeight` arguments specify the size of the
/// output image, in image pixels. If they are not equal to the intrinsic
/// dimensions of the image, then the image will be scaled after being decoded.
/// If the `allowUpscaling` parameter is not set to true, both dimensions will
/// be capped at the intrinsic dimensions of the image, even if only one of
/// them would have exceeded those intrinsic dimensions. If exactly one of these
/// two arguments is specified, then the aspect ratio will be maintained while
/// forcing the image to match the other given dimension. If neither is
/// specified, then the image maintains its intrinsic size.
///
/// Scaling the image to larger than its intrinsic size should usually be
/// avoided, since it causes the image to use more memory than necessary.
/// Instead, prefer scaling the [Canvas] transform. If the image must be scaled
/// up, the `allowUpscaling` parameter must be set to true.
void decodeImageFromPixels(
Uint8List pixels,
int width,
int height,
PixelFormat format,
ImageDecoderCallback callback, {
int? rowBytes,
int? targetWidth,
int? targetHeight,
bool allowUpscaling = true,
}) {
if (targetWidth != null) {
assert(allowUpscaling || targetWidth <= width);
}
if (targetHeight != null) {
assert(allowUpscaling || targetHeight <= height);
}
ImmutableBuffer.fromUint8List(pixels)
.then((ImmutableBuffer buffer) {
final ImageDescriptor descriptor = ImageDescriptor.raw(
buffer,
width: width,
height: height,
rowBytes: rowBytes,
pixelFormat: format,
);
if (!allowUpscaling) {
if (targetWidth != null && targetWidth! > descriptor.width) {
targetWidth = descriptor.width;
}
if (targetHeight != null && targetHeight! > descriptor.height) {
targetHeight = descriptor.height;
}
}
descriptor
.instantiateCodec(
targetWidth: targetWidth,
targetHeight: targetHeight,
)
.then((Codec codec) {
final Future<FrameInfo> frameInfo = codec.getNextFrame();
codec.dispose();
return frameInfo;
})
.then((FrameInfo frameInfo) {
buffer.dispose();
descriptor.dispose();
return callback(frameInfo.image);
});
});
}
/// Determines the winding rule that decides how the interior of a [Path] is
/// calculated.
///
/// This enum is used by the [Path.fillType] property.
enum PathFillType {
/// The interior is defined by a non-zero sum of signed edge crossings.
///
/// For a given point, the point is considered to be on the inside of the path
/// if a line drawn from the point to infinity crosses lines going clockwise
/// around the point a different number of times than it crosses lines going
/// counter-clockwise around that point.
///
/// See: <https://en.wikipedia.org/wiki/Nonzero-rule>
nonZero,
/// The interior is defined by an odd number of edge crossings.
///
/// For a given point, the point is considered to be on the inside of the path
/// if a line drawn from the point to infinity crosses an odd number of lines.
///
/// See: <https://en.wikipedia.org/wiki/Even-odd_rule>
evenOdd,
}
/// Strategies for combining paths.
///
/// See also:
///
/// * [Path.combine], which uses this enum to decide how to combine two paths.
// Must be kept in sync with SkPathOp
enum PathOperation {
/// Subtract the second path from the first path.
///
/// For example, if the two paths are overlapping circles of equal diameter
/// but differing centers, the result would be a crescent portion of the
/// first circle that was not overlapped by the second circle.
///
/// See also:
///
/// * [reverseDifference], which is the same but subtracting the first path
/// from the second.
difference,
/// Create a new path that is the intersection of the two paths, leaving the
/// overlapping pieces of the path.
///
/// For example, if the two paths are overlapping circles of equal diameter
/// but differing centers, the result would be only the overlapping portion
/// of the two circles.
///
/// See also:
/// * [xor], which is the inverse of this operation
intersect,
/// Create a new path that is the union (inclusive-or) of the two paths.
///
/// For example, if the two paths are overlapping circles of equal diameter
/// but differing centers, the result would be a figure-eight like shape
/// matching the outer boundaries of both circles.
union,
/// Create a new path that is the exclusive-or of the two paths, leaving
/// everything but the overlapping pieces of the path.
///
/// For example, if the two paths are overlapping circles of equal diameter
/// but differing centers, the figure-eight like shape less the overlapping parts
///
/// See also:
/// * [intersect], which is the inverse of this operation
xor,
/// Subtract the first path from the second path.
///
/// For example, if the two paths are overlapping circles of equal diameter
/// but differing centers, the result would be a crescent portion of the
/// second circle that was not overlapped by the first circle.
///
/// See also:
///
/// * [difference], which is the same but subtracting the second path
/// from the first.
reverseDifference,
}
/// A handle for the framework to hold and retain an engine layer across frames.
abstract class EngineLayer {
/// Release the resources used by this object. The object is no longer usable
/// after this method is called.
///
/// EngineLayers indirectly retain platform specific graphics resources. Some
/// of these resources, such as images, may be memory intensive. It is
/// important to dispose of EngineLayer objects that will no longer be used as
/// soon as possible to avoid retaining these resources until the next
/// garbage collection.
///
/// Once this EngineLayer is disposed, it is no longer eligible for use as a
/// retained layer, and must not be passed as an `oldLayer` to any of the
/// [SceneBuilder] methods which accept that parameter.
///
/// This can't be a leaf call because the native function calls Dart API
/// (Dart_SetNativeInstanceField).
void dispose();
}
base class _NativeEngineLayer extends NativeFieldWrapperClass1 implements EngineLayer {
/// This class is created by the engine, and should not be instantiated
/// or extended directly.
_NativeEngineLayer._();
@override
@Native<Void Function(Pointer<Void>)>(symbol: 'EngineLayer::dispose')
external void dispose();
}
/// A complex, one-dimensional subset of a plane.
///
/// A path consists of a number of sub-paths, and a _current point_.
///
/// Sub-paths consist of segments of various types, such as lines,
/// arcs, or beziers. Sub-paths can be open or closed, and can
/// self-intersect.
///
/// Closed sub-paths enclose a (possibly discontiguous) region of the
/// plane based on the current [fillType].
///
/// The _current point_ is initially at the origin. After each
/// operation adding a segment to a sub-path, the current point is
/// updated to the end of that segment.
///
/// Paths can be drawn on canvases using [Canvas.drawPath], and can
/// used to create clip regions using [Canvas.clipPath].
abstract class Path {
factory Path() = _NativePath;
/// Creates a copy of another [Path].
///
/// This copy is fast and does not require additional memory unless either
/// the `source` path or the path returned by this constructor are modified.
factory Path.from(Path source) {
final _NativePath clonedPath = _NativePath._();
(source as _NativePath)._clone(clonedPath);
return clonedPath;
}
/// Determines how the interior of this path is calculated.
///
/// Defaults to the non-zero winding rule, [PathFillType.nonZero].
PathFillType get fillType;
set fillType(PathFillType value);
/// Starts a new sub-path at the given coordinate.
void moveTo(double x, double y);
/// Starts a new sub-path at the given offset from the current point.
void relativeMoveTo(double dx, double dy);
/// Adds a straight line segment from the current point to the given
/// point.
void lineTo(double x, double y);
/// Adds a straight line segment from the current point to the point
/// at the given offset from the current point.
void relativeLineTo(double dx, double dy);
/// Adds a quadratic bezier segment that curves from the current
/// point to the given point (x2,y2), using the control point
/// (x1,y1).
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/path_quadratic_to.png#gh-light-mode-only)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/path_quadratic_to_dark.png#gh-dark-mode-only)
void quadraticBezierTo(double x1, double y1, double x2, double y2);
/// Adds a quadratic bezier segment that curves from the current
/// point to the point at the offset (x2,y2) from the current point,
/// using the control point at the offset (x1,y1) from the current
/// point.
void relativeQuadraticBezierTo(double x1, double y1, double x2, double y2);
/// Adds a cubic bezier segment that curves from the current point
/// to the given point (x3,y3), using the control points (x1,y1) and
/// (x2,y2).
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/path_cubic_to.png#gh-light-mode-only)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/path_cubic_to_dark.png#gh-dark-mode-only)
void cubicTo(double x1, double y1, double x2, double y2, double x3, double y3);
/// Adds a cubic bezier segment that curves from the current point
/// to the point at the offset (x3,y3) from the current point, using
/// the control points at the offsets (x1,y1) and (x2,y2) from the
/// current point.
void relativeCubicTo(double x1, double y1, double x2, double y2, double x3, double y3);
/// Adds a bezier segment that curves from the current point to the
/// given point (x2,y2), using the control points (x1,y1) and the
/// weight w. If the weight is greater than 1, then the curve is a
/// hyperbola; if the weight equals 1, it's a parabola; and if it is
/// less than 1, it is an ellipse.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/path_conic_to.png#gh-light-mode-only)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/path_conic_to_dark.png#gh-dark-mode-only)
void conicTo(double x1, double y1, double x2, double y2, double w);
/// Adds a bezier segment that curves from the current point to the
/// point at the offset (x2,y2) from the current point, using the
/// control point at the offset (x1,y1) from the current point and
/// the weight w. If the weight is greater than 1, then the curve is
/// a hyperbola; if the weight equals 1, it's a parabola; and if it
/// is less than 1, it is an ellipse.
void relativeConicTo(double x1, double y1, double x2, double y2, double w);
/// If the `forceMoveTo` argument is false, adds a straight line
/// segment and an arc segment.
///
/// If the `forceMoveTo` argument is true, starts a new sub-path
/// consisting of an arc segment.
///
/// In either case, the arc segment consists of the arc that follows
/// the edge of the oval bounded by the given rectangle, from
/// startAngle radians around the oval up to startAngle + sweepAngle
/// radians around the oval, with zero radians being the point on
/// the right hand side of the oval that crosses the horizontal line
/// that intersects the center of the rectangle and with positive
/// angles going clockwise around the oval.
///
/// The line segment added if `forceMoveTo` is false starts at the
/// current point and ends at the start of the arc.
void arcTo(Rect rect, double startAngle, double sweepAngle, bool forceMoveTo);
/// Appends up to four conic curves weighted to describe an oval of `radius`
/// and rotated by `rotation` (measured in degrees and clockwise).
///
/// The first curve begins from the last point in the path and the last ends
/// at `arcEnd`. The curves follow a path in a direction determined by
/// `clockwise` and `largeArc` in such a way that the sweep angle
/// is always less than 360 degrees.
///
/// A simple line is appended if either radii are zero or the last
/// point in the path is `arcEnd`. The radii are scaled to fit the last path
/// point if both are greater than zero but too small to describe an arc.
///
void arcToPoint(Offset arcEnd, {
Radius radius = Radius.zero,
double rotation = 0.0,
bool largeArc = false,
bool clockwise = true,
});
/// Appends up to four conic curves weighted to describe an oval of `radius`
/// and rotated by `rotation` (measured in degrees and clockwise).
///
/// The last path point is described by (px, py).
///
/// The first curve begins from the last point in the path and the last ends
/// at `arcEndDelta.dx + px` and `arcEndDelta.dy + py`. The curves follow a
/// path in a direction determined by `clockwise` and `largeArc`
/// in such a way that the sweep angle is always less than 360 degrees.
///
/// A simple line is appended if either radii are zero, or, both
/// `arcEndDelta.dx` and `arcEndDelta.dy` are zero. The radii are scaled to
/// fit the last path point if both are greater than zero but too small to
/// describe an arc.
void relativeArcToPoint(
Offset arcEndDelta, {
Radius radius = Radius.zero,
double rotation = 0.0,
bool largeArc = false,
bool clockwise = true,
});
/// Adds a new sub-path that consists of four lines that outline the
/// given rectangle.
void addRect(Rect rect);
/// Adds a new sub-path that consists of a curve that forms the
/// ellipse that fills the given rectangle.
///
/// To add a circle, pass an appropriate rectangle as `oval`. [Rect.fromCircle]
/// can be used to easily describe the circle's center [Offset] and radius.
void addOval(Rect oval);
/// Adds a new sub-path with one arc segment that consists of the arc
/// that follows the edge of the oval bounded by the given
/// rectangle, from startAngle radians around the oval up to
/// startAngle + sweepAngle radians around the oval, with zero
/// radians being the point on the right hand side of the oval that
/// crosses the horizontal line that intersects the center of the
/// rectangle and with positive angles going clockwise around the
/// oval.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/path_add_arc.png#gh-light-mode-only)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/path_add_arc_dark.png#gh-dark-mode-only)
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/path_add_arc_ccw.png#gh-light-mode-only)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/path_add_arc_ccw_dark.png#gh-dark-mode-only)
void addArc(Rect oval, double startAngle, double sweepAngle);
/// Adds a new sub-path with a sequence of line segments that connect the given
/// points.
///
/// If `close` is true, a final line segment will be added that connects the
/// last point to the first point.
///
/// The `points` argument is interpreted as offsets from the origin.
void addPolygon(List<Offset> points, bool close);
/// Adds a new sub-path that consists of the straight lines and
/// curves needed to form the rounded rectangle described by the
/// argument.
void addRRect(RRect rrect);
/// Adds the sub-paths of `path`, offset by `offset`, to this path.
///
/// If `matrix4` is specified, the path will be transformed by this matrix
/// after the matrix is translated by the given offset. The matrix is a 4x4
/// matrix stored in column major order.
void addPath(Path path, Offset offset, {Float64List? matrix4});
/// Adds the sub-paths of `path`, offset by `offset`, to this path.
/// The current sub-path is extended with the first sub-path
/// of `path`, connecting them with a lineTo if necessary.
///
/// If `matrix4` is specified, the path will be transformed by this matrix
/// after the matrix is translated by the given `offset`. The matrix is a 4x4
/// matrix stored in column major order.
void extendWithPath(Path path, Offset offset, {Float64List? matrix4});
/// Closes the last sub-path, as if a straight line had been drawn
/// from the current point to the first point of the sub-path.
void close();
/// Clears the [Path] object of all sub-paths, returning it to the
/// same state it had when it was created. The _current point_ is
/// reset to the origin.
void reset();
/// Tests to see if the given point is within the path. (That is, whether the
/// point would be in the visible portion of the path if the path was used
/// with [Canvas.clipPath].)
///
/// The `point` argument is interpreted as an offset from the origin.
///
/// Returns true if the point is in the path, and false otherwise.
bool contains(Offset point);
/// Returns a copy of the path with all the segments of every
/// sub-path translated by the given offset.
Path shift(Offset offset);
/// Returns a copy of the path with all the segments of every
/// sub-path transformed by the given matrix.
Path transform(Float64List matrix4);
/// Computes the bounding rectangle for this path.
///
/// A path containing only axis-aligned points on the same straight line will
/// have no area, and therefore `Rect.isEmpty` will return true for such a
/// path. Consider checking `rect.width + rect.height > 0.0` instead, or
/// using the [computeMetrics] API to check the path length.
///
/// For many more elaborate paths, the bounds may be inaccurate. For example,
/// when a path contains a circle, the points used to compute the bounds are
/// the circle's implied control points, which form a square around the circle;
/// if the circle has a transformation applied using [transform] then that
/// square is rotated, and the (axis-aligned, non-rotated) bounding box
/// therefore ends up grossly overestimating the actual area covered by the
/// circle.
// see https://skia.org/user/api/SkPath_Reference#SkPath_getBounds
Rect getBounds();
/// Combines the two paths according to the manner specified by the given
/// `operation`.
///
/// The resulting path will be constructed from non-overlapping contours. The
/// curve order is reduced where possible so that cubics may be turned into
/// quadratics, and quadratics maybe turned into lines.
static Path combine(PathOperation operation, Path path1, Path path2) {
final _NativePath path = _NativePath();
if (path._op(path1 as _NativePath, path2 as _NativePath, operation.index)) {
return path;
}
throw StateError('Path.combine() failed. This may be due an invalid path; in particular, check for NaN values.');
}
/// Creates a [PathMetrics] object for this path, which can describe various
/// properties about the contours of the path.
///
/// A [Path] is made up of zero or more contours. A contour is made up of
/// connected curves and segments, created via methods like [lineTo],
/// [cubicTo], [arcTo], [quadraticBezierTo], their relative counterparts, as
/// well as the add* methods such as [addRect]. Creating a new [Path] starts
/// a new contour once it has any drawing instructions, and another new
/// contour is started for each [moveTo] instruction.
///
/// A [PathMetric] object describes properties of an individual contour,
/// such as its length, whether it is closed, what the tangent vector of a
/// particular offset along the path is. It also provides a method for
/// creating sub-paths: [PathMetric.extractPath].
///
/// Calculating [PathMetric] objects is not trivial. The [PathMetrics] object
/// returned by this method is a lazy [Iterable], meaning it only performs
/// calculations when the iterator is moved to the next [PathMetric]. Callers
/// that wish to memoize this iterable can easily do so by using
/// [Iterable.toList] on the result of this method. In particular, callers
/// looking for information about how many contours are in the path should
/// either store the result of `path.computeMetrics().length`, or should use
/// `path.computeMetrics().toList()` so they can repeatedly check the length,
/// since calling `Iterable.length` causes traversal of the entire iterable.
///
/// In particular, callers should be aware that [PathMetrics.length] is the
/// number of contours, **not the length of the path**. To get the length of
/// a contour in a path, use [PathMetric.length].
///
/// If `forceClosed` is set to true, the contours of the path will be measured
/// as if they had been closed, even if they were not explicitly closed.
PathMetrics computeMetrics({bool forceClosed = false});
}
base class _NativePath extends NativeFieldWrapperClass1 implements Path {
/// Create a new empty [Path] object.
_NativePath() { _constructor(); }
/// Avoids creating a new native backing for the path for methods that will
/// create it later, such as [Path.from], [shift] and [transform].
_NativePath._();
@Native<Void Function(Handle)>(symbol: 'Path::Create')
external void _constructor();
@Native<Void Function(Pointer<Void>, Handle)>(symbol: 'Path::clone')
external void _clone(Path outPath);
@override
PathFillType get fillType => PathFillType.values[_getFillType()];
@override
set fillType(PathFillType value) => _setFillType(value.index);
@Native<Int32 Function(Pointer<Void>)>(symbol: 'Path::getFillType', isLeaf: true)
external int _getFillType();
@Native<Void Function(Pointer<Void>, Int32)>(symbol: 'Path::setFillType', isLeaf: true)
external void _setFillType(int fillType);
@override
@Native<Void Function(Pointer<Void>, Double, Double)>(symbol: 'Path::moveTo', isLeaf: true)
external void moveTo(double x, double y);
@override
@Native<Void Function(Pointer<Void>, Double, Double)>(symbol: 'Path::relativeMoveTo', isLeaf: true)
external void relativeMoveTo(double dx, double dy);
@override
@Native<Void Function(Pointer<Void>, Double, Double)>(symbol: 'Path::lineTo', isLeaf: true)
external void lineTo(double x, double y);
@override
@Native<Void Function(Pointer<Void>, Double, Double)>(symbol: 'Path::relativeLineTo', isLeaf: true)
external void relativeLineTo(double dx, double dy);
@override
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double)>(symbol: 'Path::quadraticBezierTo', isLeaf: true)
external void quadraticBezierTo(double x1, double y1, double x2, double y2);
@override
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double)>(symbol: 'Path::relativeQuadraticBezierTo', isLeaf: true)
external void relativeQuadraticBezierTo(
double x1, double y1, double x2, double y2);
@override
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Double, Double)>(symbol: 'Path::cubicTo', isLeaf: true)
external void cubicTo(double x1, double y1, double x2, double y2, double x3, double y3);
@override
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Double, Double)>(symbol: 'Path::relativeCubicTo', isLeaf: true)
external void relativeCubicTo(double x1, double y1, double x2, double y2, double x3, double y3);
@override
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Double)>(symbol: 'Path::conicTo', isLeaf: true)
external void conicTo(double x1, double y1, double x2, double y2, double w);
@override
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Double)>(symbol: 'Path::relativeConicTo', isLeaf: true)
external void relativeConicTo(double x1, double y1, double x2, double y2, double w);
@override
void arcTo(Rect rect, double startAngle, double sweepAngle, bool forceMoveTo) {
assert(_rectIsValid(rect));
_arcTo(rect.left, rect.top, rect.right, rect.bottom, startAngle, sweepAngle, forceMoveTo);
}
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Double, Double, Bool)>(symbol: 'Path::arcTo', isLeaf: true)
external void _arcTo(double left, double top, double right, double bottom, double startAngle, double sweepAngle, bool forceMoveTo);
@override
void arcToPoint(Offset arcEnd, {
Radius radius = Radius.zero,
double rotation = 0.0,
bool largeArc = false,
bool clockwise = true,
}) {
assert(_offsetIsValid(arcEnd));
assert(_radiusIsValid(radius));
_arcToPoint(arcEnd.dx, arcEnd.dy, radius.x, radius.y, rotation, largeArc, clockwise);
}
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Double, Bool, Bool)>(symbol: 'Path::arcToPoint', isLeaf: true)
external void _arcToPoint(double arcEndX, double arcEndY, double radiusX, double radiusY, double rotation, bool largeArc, bool clockwise);
@override
void relativeArcToPoint(
Offset arcEndDelta, {
Radius radius = Radius.zero,
double rotation = 0.0,
bool largeArc = false,
bool clockwise = true,
}) {
assert(_offsetIsValid(arcEndDelta));
assert(_radiusIsValid(radius));
_relativeArcToPoint(arcEndDelta.dx, arcEndDelta.dy, radius.x, radius.y, rotation, largeArc, clockwise);
}
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Double, Bool, Bool)>(symbol: 'Path::relativeArcToPoint', isLeaf: true)
external void _relativeArcToPoint(
double arcEndX,
double arcEndY,
double radiusX,
double radiusY,
double rotation,
bool largeArc,
bool clockwise);
@override
void addRect(Rect rect) {
assert(_rectIsValid(rect));
_addRect(rect.left, rect.top, rect.right, rect.bottom);
}
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double)>(symbol: 'Path::addRect', isLeaf: true)
external void _addRect(double left, double top, double right, double bottom);
@override
void addOval(Rect oval) {
assert(_rectIsValid(oval));
_addOval(oval.left, oval.top, oval.right, oval.bottom);
}
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double)>(symbol: 'Path::addOval', isLeaf: true)
external void _addOval(double left, double top, double right, double bottom);
@override
void addArc(Rect oval, double startAngle, double sweepAngle) {
assert(_rectIsValid(oval));
_addArc(oval.left, oval.top, oval.right, oval.bottom, startAngle, sweepAngle);
}
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Double, Double)>(symbol: 'Path::addArc', isLeaf: true)
external void _addArc(double left, double top, double right, double bottom, double startAngle, double sweepAngle);
@override
void addPolygon(List<Offset> points, bool close) {
_addPolygon(_encodePointList(points), close);
}
@Native<Void Function(Pointer<Void>, Handle, Bool)>(symbol: 'Path::addPolygon')
external void _addPolygon(Float32List points, bool close);
@override
void addRRect(RRect rrect) {
assert(_rrectIsValid(rrect));
_addRRect(rrect._getValue32());
}
@Native<Void Function(Pointer<Void>, Handle)>(symbol: 'Path::addRRect')
external void _addRRect(Float32List rrect);
@override
void addPath(Path path, Offset offset, {Float64List? matrix4}) {
assert(_offsetIsValid(offset));
if (matrix4 != null) {
assert(_matrix4IsValid(matrix4));
_addPathWithMatrix(path as _NativePath, offset.dx, offset.dy, matrix4);
} else {
_addPath(path as _NativePath, offset.dx, offset.dy);
}
}
@Native<Void Function(Pointer<Void>, Pointer<Void>, Double, Double)>(symbol: 'Path::addPath')
external void _addPath(_NativePath path, double dx, double dy);
@Native<Void Function(Pointer<Void>, Pointer<Void>, Double, Double, Handle)>(symbol: 'Path::addPathWithMatrix')
external void _addPathWithMatrix(_NativePath path, double dx, double dy, Float64List matrix);
@override
void extendWithPath(Path path, Offset offset, {Float64List? matrix4}) {
assert(_offsetIsValid(offset));
if (matrix4 != null) {
assert(_matrix4IsValid(matrix4));
_extendWithPathAndMatrix(path as _NativePath, offset.dx, offset.dy, matrix4);
} else {
_extendWithPath(path as _NativePath, offset.dx, offset.dy);
}
}
@Native<Void Function(Pointer<Void>, Pointer<Void>, Double, Double)>(symbol: 'Path::extendWithPath')
external void _extendWithPath(_NativePath path, double dx, double dy);
@Native<Void Function(Pointer<Void>, Pointer<Void>, Double, Double, Handle)>(symbol: 'Path::extendWithPathAndMatrix')
external void _extendWithPathAndMatrix(_NativePath path, double dx, double dy, Float64List matrix);
@override
@Native<Void Function(Pointer<Void>)>(symbol: 'Path::close', isLeaf: true)
external void close();
@override
@Native<Void Function(Pointer<Void>)>(symbol: 'Path::reset', isLeaf: true)
external void reset();
@override
bool contains(Offset point) {
assert(_offsetIsValid(point));
return _contains(point.dx, point.dy);
}
@Native<Bool Function(Pointer<Void>, Double, Double)>(symbol: 'Path::contains', isLeaf: true)
external bool _contains(double x, double y);
@override
Path shift(Offset offset) {
assert(_offsetIsValid(offset));
final _NativePath path = _NativePath._();
_shift(path, offset.dx, offset.dy);
return path;
}
@Native<Void Function(Pointer<Void>, Handle, Double, Double)>(symbol: 'Path::shift')
external void _shift(Path outPath, double dx, double dy);
@override
Path transform(Float64List matrix4) {
assert(_matrix4IsValid(matrix4));
final _NativePath path = _NativePath._();
_transform(path, matrix4);
return path;
}
@Native<Void Function(Pointer<Void>, Handle, Handle)>(symbol: 'Path::transform')
external void _transform(Path outPath, Float64List matrix4);
@override
Rect getBounds() {
final Float32List rect = _getBounds();
return Rect.fromLTRB(rect[0], rect[1], rect[2], rect[3]);
}
@Native<Handle Function(Pointer<Void>)>(symbol: 'Path::getBounds')
external Float32List _getBounds();
@Native<Bool Function(Pointer<Void>, Pointer<Void>, Pointer<Void>, Int32)>(symbol: 'Path::op')
external bool _op(_NativePath path1, _NativePath path2, int operation);
@override
PathMetrics computeMetrics({bool forceClosed = false}) {
return PathMetrics._(this, forceClosed);
}
}
/// The geometric description of a tangent: the angle at a point.
///
/// See also:
/// * [PathMetric.getTangentForOffset], which returns the tangent of an offset along a path.
class Tangent {
/// Creates a [Tangent] with the given values.
///
/// The arguments must not be null.
const Tangent(this.position, this.vector);
/// Creates a [Tangent] based on the angle rather than the vector.
///
/// The [vector] is computed to be the unit vector at the given angle, interpreted
/// as clockwise radians from the x axis.
factory Tangent.fromAngle(Offset position, double angle) {
return Tangent(position, Offset(math.cos(angle), math.sin(angle)));
}
/// Position of the tangent.
///
/// When used with [PathMetric.getTangentForOffset], this represents the precise
/// position that the given offset along the path corresponds to.
final Offset position;
/// The vector of the curve at [position].
///
/// When used with [PathMetric.getTangentForOffset], this is the vector of the
/// curve that is at the given offset along the path (i.e. the direction of the
/// curve at [position]).
final Offset vector;
/// The direction of the curve at [position].
///
/// When used with [PathMetric.getTangentForOffset], this is the angle of the
/// curve that is the given offset along the path (i.e. the direction of the
/// curve at [position]).
///
/// This value is in radians, with 0.0 meaning pointing along the x axis in
/// the positive x-axis direction, positive numbers pointing downward toward
/// the negative y-axis, i.e. in a clockwise direction, and negative numbers
/// pointing upward toward the positive y-axis, i.e. in a counter-clockwise
/// direction.
// flip the sign to be consistent with [Path.arcTo]'s `sweepAngle`
double get angle => -math.atan2(vector.dy, vector.dx);
}
/// An iterable collection of [PathMetric] objects describing a [Path].
///
/// A [PathMetrics] object is created by using the [Path.computeMetrics] method,
/// and represents the path as it stood at the time of the call. Subsequent
/// modifications of the path do not affect the [PathMetrics] object.
///
/// Each path metric corresponds to a segment, or contour, of a path.
///
/// For example, a path consisting of a [Path.lineTo], a [Path.moveTo], and
/// another [Path.lineTo] will contain two contours and thus be represented by
/// two [PathMetric] objects.
///
/// This iterable does not memoize. Callers who need to traverse the list
/// multiple times, or who need to randomly access elements of the list, should
/// use [toList] on this object.
class PathMetrics extends collection.IterableBase<PathMetric> {
PathMetrics._(Path path, bool forceClosed) :
_iterator = PathMetricIterator._(_PathMeasure(path as _NativePath, forceClosed));
final Iterator<PathMetric> _iterator;
@override
Iterator<PathMetric> get iterator => _iterator;
}
/// Used by [PathMetrics] to track iteration from one segment of a path to the
/// next for measurement.
class PathMetricIterator implements Iterator<PathMetric> {
PathMetricIterator._(this._pathMeasure);
PathMetric? _pathMetric;
final _PathMeasure _pathMeasure;
@override
PathMetric get current {
final PathMetric? currentMetric = _pathMetric;
if (currentMetric == null) {
throw RangeError(
'PathMetricIterator is not pointing to a PathMetric. This can happen in two situations:\n'
'- The iteration has not started yet. If so, call "moveNext" to start iteration.\n'
'- The iterator ran out of elements. If so, check that "moveNext" returns true prior to calling "current".'
);
}
return currentMetric;
}
@override
bool moveNext() {
if (_pathMeasure._nextContour()) {
_pathMetric = PathMetric._(_pathMeasure);
return true;
}
_pathMetric = null;
return false;
}
}
/// Utilities for measuring a [Path] and extracting sub-paths.
///
/// Iterate over the object returned by [Path.computeMetrics] to obtain
/// [PathMetric] objects. Callers that want to randomly access elements or
/// iterate multiple times should use `path.computeMetrics().toList()`, since
/// [PathMetrics] does not memoize.
///
/// Once created, the metrics are only valid for the path as it was specified
/// when [Path.computeMetrics] was called. If additional contours are added or
/// any contours are updated, the metrics need to be recomputed. Previously
/// created metrics will still refer to a snapshot of the path at the time they
/// were computed, rather than to the actual metrics for the new mutations to
/// the path.
class PathMetric {
PathMetric._(this._measure)
: length = _measure.length(_measure.currentContourIndex),
isClosed = _measure.isClosed(_measure.currentContourIndex),
contourIndex = _measure.currentContourIndex;
/// Return the total length of the current contour.
///
/// The length may be calculated from an approximation of the geometry
/// originally added. For this reason, it is not recommended to rely on
/// this property for mathematically correct lengths of common shapes.
final double length;
/// Whether the contour is closed.
///
/// Returns true if the contour ends with a call to [Path.close] (which may
/// have been implied when using methods like [Path.addRect]) or if
/// `forceClosed` was specified as true in the call to [Path.computeMetrics].
/// Returns false otherwise.
final bool isClosed;
/// The zero-based index of the contour.
///
/// [Path] objects are made up of zero or more contours. The first contour is
/// created once a drawing command (e.g. [Path.lineTo]) is issued. A
/// [Path.moveTo] command after a drawing command may create a new contour,
/// although it may not if optimizations are applied that determine the move
/// command did not actually result in moving the pen.
///
/// This property is only valid with reference to its original iterator and
/// the contours of the path at the time the path's metrics were computed. If
/// additional contours were added or existing contours updated, this metric
/// will be invalid for the current state of the path.
final int contourIndex;
final _PathMeasure _measure;
/// Computes the position of the current contour at the given offset, and the
/// angle of the path at that point.
///
/// For example, calling this method with a distance of 1.41 for a line from
/// 0.0,0.0 to 2.0,2.0 would give a point 1.0,1.0 and the angle 45 degrees
/// (but in radians).
///
/// Returns null if the contour has zero [length].
///
/// The distance is clamped to the [length] of the current contour.
Tangent? getTangentForOffset(double distance) {
return _measure.getTangentForOffset(contourIndex, distance);
}
/// Given a start and end distance, return the intervening segment(s).
///
/// `start` and `end` are clamped to legal values (0..[length])
/// Begin the segment with a moveTo if `startWithMoveTo` is true.
Path extractPath(double start, double end, {bool startWithMoveTo = true}) {
return _measure.extractPath(contourIndex, start, end, startWithMoveTo: startWithMoveTo);
}
@override
String toString() => 'PathMetric(length: $length, isClosed: $isClosed, contourIndex: $contourIndex)';
}
base class _PathMeasure extends NativeFieldWrapperClass1 {
_PathMeasure(_NativePath path, bool forceClosed) {
_constructor(path, forceClosed);
}
@Native<Void Function(Handle, Pointer<Void>, Bool)>(symbol: 'PathMeasure::Create')
external void _constructor(_NativePath path, bool forceClosed);
double length(int contourIndex) {
assert(contourIndex <= currentContourIndex, 'Iterator must be advanced before index $contourIndex can be used.');
return _length(contourIndex);
}
@Native<Double Function(Pointer<Void>, Int32)>(symbol: 'PathMeasure::getLength', isLeaf: true)
external double _length(int contourIndex);
Tangent? getTangentForOffset(int contourIndex, double distance) {
assert(contourIndex <= currentContourIndex,
'Iterator must be advanced before index $contourIndex can be used.');
final Float32List posTan = _getPosTan(contourIndex, distance);
// first entry == 0 indicates that Skia returned false
if (posTan[0] == 0.0) {
return null;
} else {
return Tangent(
Offset(posTan[1], posTan[2]),
Offset(posTan[3], posTan[4])
);
}
}
@Native<Handle Function(Pointer<Void>, Int32, Double)>(symbol: 'PathMeasure::getPosTan')
external Float32List _getPosTan(int contourIndex, double distance);
Path extractPath(int contourIndex, double start, double end,
{bool startWithMoveTo = true}) {
assert(contourIndex <= currentContourIndex, 'Iterator must be advanced before index $contourIndex can be used.');
final _NativePath path = _NativePath._();
_extractPath(path, contourIndex, start, end, startWithMoveTo);
return path;
}
@Native<Void Function(Pointer<Void>, Handle, Int32, Double, Double, Bool)>(symbol: 'PathMeasure::getSegment')
external void _extractPath(Path outPath, int contourIndex, double start, double end, bool startWithMoveTo);
bool isClosed(int contourIndex) {
assert(contourIndex <= currentContourIndex, 'Iterator must be advanced before index $contourIndex can be used.');
return _isClosed(contourIndex);
}
@Native<Bool Function(Pointer<Void>, Int32)>(symbol: 'PathMeasure::isClosed', isLeaf: true)
external bool _isClosed(int contourIndex);
// Move to the next contour in the path.
//
// A path can have a next contour if [Path.moveTo] was called after drawing began.
// Return true if one exists, or false.
bool _nextContour() {
final bool next = _nativeNextContour();
if (next) {
currentContourIndex++;
}
return next;
}
@Native<Bool Function(Pointer<Void>)>(symbol: 'PathMeasure::nextContour', isLeaf: true)
external bool _nativeNextContour();
/// The index of the current contour in the list of contours in the path.
///
/// [nextContour] will increment this to the zero based index.
int currentContourIndex = -1;
}
/// Styles to use for blurs in [MaskFilter] objects.
// These enum values must be kept in sync with DlBlurStyle.
enum BlurStyle {
// These mirror DlBlurStyle and must be kept in sync.
/// Fuzzy inside and outside. This is useful for painting shadows that are
/// offset from the shape that ostensibly is casting the shadow.
normal,
/// Solid inside, fuzzy outside. This corresponds to drawing the shape, and
/// additionally drawing the blur. This can make objects appear brighter,
/// maybe even as if they were fluorescent.
solid,
/// Nothing inside, fuzzy outside. This is useful for painting shadows for
/// partially transparent shapes, when they are painted separately but without
/// an offset, so that the shadow doesn't paint below the shape.
outer,
/// Fuzzy inside, nothing outside. This can make shapes appear to be lit from
/// within.
inner,
}
/// A mask filter to apply to shapes as they are painted. A mask filter is a
/// function that takes a bitmap of color pixels, and returns another bitmap of
/// color pixels.
///
/// Instances of this class are used with [Paint.maskFilter] on [Paint] objects.
class MaskFilter {
/// Creates a mask filter that takes the shape being drawn and blurs it.
///
/// This is commonly used to approximate shadows.
///
/// The `style` argument controls the kind of effect to draw; see [BlurStyle].
///
/// The `sigma` argument controls the size of the effect. It is the standard
/// deviation of the Gaussian blur to apply. The value must be greater than
/// zero. The sigma corresponds to very roughly half the radius of the effect
/// in pixels.
///
/// A blur is an expensive operation and should therefore be used sparingly.
///
/// The arguments must not be null.
///
/// See also:
///
/// * [Canvas.drawShadow], which is a more efficient way to draw shadows.
const MaskFilter.blur(
this._style,
this._sigma,
);
final BlurStyle _style;
final double _sigma;
// The type of MaskFilter class to create for flutter::DisplayList.
// These constants must be kept in sync with MaskFilterType in paint.cc.
static const int _TypeNone = 0; // null
static const int _TypeBlur = 1; // DlBlurMaskFilter
@override
bool operator ==(Object other) {
return other is MaskFilter
&& other._style == _style
&& other._sigma == _sigma;
}
@override
int get hashCode => Object.hash(_style, _sigma);
@override
String toString() => 'MaskFilter.blur($_style, ${_sigma.toStringAsFixed(1)})';
}
/// A description of a color filter to apply when drawing a shape or compositing
/// a layer with a particular [Paint]. A color filter is a function that takes
/// two colors, and outputs one color. When applied during compositing, it is
/// independently applied to each pixel of the layer being drawn before the
/// entire layer is merged with the destination.
///
/// Instances of this class are used with [Paint.colorFilter] on [Paint]
/// objects.
class ColorFilter implements ImageFilter {
/// Creates a color filter that applies the blend mode given as the second
/// argument. The source color is the one given as the first argument, and the
/// destination color is the one from the layer being composited.
///
/// The output of this filter is then composited into the background according
/// to the [Paint.blendMode], using the output of this filter as the source
/// and the background as the destination.
const ColorFilter.mode(Color color, BlendMode blendMode)
: _color = color,
_blendMode = blendMode,
_matrix = null,
_type = _kTypeMode;
/// Construct a color filter that transforms a color by a 5x5 matrix, where
/// the fifth row is implicitly added in an identity configuration.
///
/// Every pixel's color value, represented as an `[R, G, B, A]`, is matrix
/// multiplied to create a new color:
///
/// | R' | | a00 a01 a02 a03 a04 | | R |
/// | G' | | a10 a11 a12 a13 a14 | | G |
/// | B' | = | a20 a21 a22 a23 a24 | * | B |
/// | A' | | a30 a31 a32 a33 a34 | | A |
/// | 1 | | 0 0 0 0 1 | | 1 |
///
/// The matrix is in row-major order and the translation column is specified
/// in unnormalized, 0...255, space. For example, the identity matrix is:
///
/// ```dart
/// const ColorFilter identity = ColorFilter.matrix(<double>[
/// 1, 0, 0, 0, 0,
/// 0, 1, 0, 0, 0,
/// 0, 0, 1, 0, 0,
/// 0, 0, 0, 1, 0,
/// ]);
/// ```
///
/// ## Examples
///
/// An inversion color matrix:
///
/// ```dart
/// const ColorFilter invert = ColorFilter.matrix(<double>[
/// -1, 0, 0, 0, 255,
/// 0, -1, 0, 0, 255,
/// 0, 0, -1, 0, 255,
/// 0, 0, 0, 1, 0,
/// ]);
/// ```
///
/// A sepia-toned color matrix (values based on the [Filter Effects Spec](https://www.w3.org/TR/filter-effects-1/#sepiaEquivalent)):
///
/// ```dart
/// const ColorFilter sepia = ColorFilter.matrix(<double>[
/// 0.393, 0.769, 0.189, 0, 0,
/// 0.349, 0.686, 0.168, 0, 0,
/// 0.272, 0.534, 0.131, 0, 0,
/// 0, 0, 0, 1, 0,
/// ]);
/// ```
///
/// A greyscale color filter (values based on the [Filter Effects Spec](https://www.w3.org/TR/filter-effects-1/#grayscaleEquivalent)):
///
/// ```dart
/// const ColorFilter greyscale = ColorFilter.matrix(<double>[
/// 0.2126, 0.7152, 0.0722, 0, 0,
/// 0.2126, 0.7152, 0.0722, 0, 0,
/// 0.2126, 0.7152, 0.0722, 0, 0,
/// 0, 0, 0, 1, 0,
/// ]);
/// ```
const ColorFilter.matrix(List<double> matrix)
: _color = null,
_blendMode = null,
_matrix = matrix,
_type = _kTypeMatrix;
/// Construct a color filter that applies the sRGB gamma curve to the RGB
/// channels.
const ColorFilter.linearToSrgbGamma()
: _color = null,
_blendMode = null,
_matrix = null,
_type = _kTypeLinearToSrgbGamma;
/// Creates a color filter that applies the inverse of the sRGB gamma curve
/// to the RGB channels.
const ColorFilter.srgbToLinearGamma()
: _color = null,
_blendMode = null,
_matrix = null,
_type = _kTypeSrgbToLinearGamma;
final Color? _color;
final BlendMode? _blendMode;
final List<double>? _matrix;
final int _type;
// The type of DlColorFilter class to create.
static const int _kTypeMode = 1; // MakeModeFilter
static const int _kTypeMatrix = 2; // MakeMatrixFilterRowMajor255
static const int _kTypeLinearToSrgbGamma = 3; // MakeLinearToSRGBGamma
static const int _kTypeSrgbToLinearGamma = 4; // MakeSRGBToLinearGamma
// DlColorImageFilter
@override
_ImageFilter _toNativeImageFilter() => _ImageFilter.fromColorFilter(this);
_ColorFilter? _toNativeColorFilter() {
switch (_type) {
case _kTypeMode:
if (_color == null || _blendMode == null) {
return null;
}
return _ColorFilter.mode(this);
case _kTypeMatrix:
final List<double>? matrix = _matrix;
if (matrix == null) {
return null;
}
assert(matrix.length == 20, 'Color Matrix must have 20 entries.');
return _ColorFilter.matrix(this);
case _kTypeLinearToSrgbGamma:
return _ColorFilter.linearToSrgbGamma(this);
case _kTypeSrgbToLinearGamma:
return _ColorFilter.srgbToLinearGamma(this);
default:
throw StateError('Unknown mode $_type for ColorFilter.');
}
}
@override
bool operator ==(Object other) {
if (other.runtimeType != runtimeType) {
return false;
}
return other is ColorFilter
&& other._type == _type
&& _listEquals<double>(other._matrix, _matrix)
&& other._color == _color
&& other._blendMode == _blendMode;
}
@override
int get hashCode {
final List<double>? matrix = _matrix;
return Object.hash(_color, _blendMode, matrix == null ? null : Object.hashAll(matrix), _type);
}
@override
String get _shortDescription {
switch (_type) {
case _kTypeMode:
return 'ColorFilter.mode($_color, $_blendMode)';
case _kTypeMatrix:
return 'ColorFilter.matrix($_matrix)';
case _kTypeLinearToSrgbGamma:
return 'ColorFilter.linearToSrgbGamma()';
case _kTypeSrgbToLinearGamma:
return 'ColorFilter.srgbToLinearGamma()';
default:
return 'unknow ColorFilter';
}
}
@override
String toString() {
switch (_type) {
case _kTypeMode:
return 'ColorFilter.mode($_color, $_blendMode)';
case _kTypeMatrix:
return 'ColorFilter.matrix($_matrix)';
case _kTypeLinearToSrgbGamma:
return 'ColorFilter.linearToSrgbGamma()';
case _kTypeSrgbToLinearGamma:
return 'ColorFilter.srgbToLinearGamma()';
default:
return "Unknown ColorFilter type. This is an error. If you're seeing this, please file an issue at https://github.com/flutter/flutter/issues/new.";
}
}
}
/// A [ColorFilter] that is backed by a native DlColorFilter.
///
/// This is a private class, rather than being the implementation of the public
/// ColorFilter, because we want ColorFilter to be const constructible and
/// efficiently comparable, so that widgets can check for ColorFilter equality to
/// avoid repainting.
base class _ColorFilter extends NativeFieldWrapperClass1 {
_ColorFilter.mode(this.creator)
: assert(creator._type == ColorFilter._kTypeMode) {
_constructor();
_initMode(creator._color!.value, creator._blendMode!.index);
}
_ColorFilter.matrix(this.creator)
: assert(creator._type == ColorFilter._kTypeMatrix) {
_constructor();
_initMatrix(Float32List.fromList(creator._matrix!));
}
_ColorFilter.linearToSrgbGamma(this.creator)
: assert(creator._type == ColorFilter._kTypeLinearToSrgbGamma) {
_constructor();
_initLinearToSrgbGamma();
}
_ColorFilter.srgbToLinearGamma(this.creator)
: assert(creator._type == ColorFilter._kTypeSrgbToLinearGamma) {
_constructor();
_initSrgbToLinearGamma();
}
/// The original Dart object that created the native wrapper, which retains
/// the values used for the filter.
final ColorFilter creator;
@Native<Void Function(Handle)>(symbol: 'ColorFilter::Create')
external void _constructor();
@Native<Void Function(Pointer<Void>, Int32, Int32)>(symbol: 'ColorFilter::initMode', isLeaf: true)
external void _initMode(int color, int blendMode);
@Native<Void Function(Pointer<Void>, Handle)>(symbol: 'ColorFilter::initMatrix')
external void _initMatrix(Float32List matrix);
@Native<Void Function(Pointer<Void>)>(symbol: 'ColorFilter::initLinearToSrgbGamma', isLeaf: true)
external void _initLinearToSrgbGamma();
@Native<Void Function(Pointer<Void>)>(symbol: 'ColorFilter::initSrgbToLinearGamma', isLeaf: true)
external void _initSrgbToLinearGamma();
}
/// A filter operation to apply to a raster image.
///
/// See also:
///
/// * [BackdropFilter], a widget that applies [ImageFilter] to its rendering.
/// * [ImageFiltered], a widget that applies [ImageFilter] to its children.
/// * [SceneBuilder.pushBackdropFilter], which is the low-level API for using
/// this class as a backdrop filter.
/// * [SceneBuilder.pushImageFilter], which is the low-level API for using
/// this class as a child layer filter.
abstract class ImageFilter {
// This class is not meant to be extended; this constructor prevents extension.
ImageFilter._(); // ignore: unused_element
/// Creates an image filter that applies a Gaussian blur.
factory ImageFilter.blur({ double sigmaX = 0.0, double sigmaY = 0.0, TileMode tileMode = TileMode.clamp }) {
return _GaussianBlurImageFilter(sigmaX: sigmaX, sigmaY: sigmaY, tileMode: tileMode);
}
/// Creates an image filter that dilates each input pixel's channel values
/// to the max value within the given radii along the x and y axes.
factory ImageFilter.dilate({ double radiusX = 0.0, double radiusY = 0.0 }) {
return _DilateImageFilter(radiusX: radiusX, radiusY: radiusY);
}
/// Create a filter that erodes each input pixel's channel values
/// to the minimum channel value within the given radii along the x and y axes.
factory ImageFilter.erode({ double radiusX = 0.0, double radiusY = 0.0 }) {
return _ErodeImageFilter(radiusX: radiusX, radiusY: radiusY);
}
/// Creates an image filter that applies a matrix transformation.
///
/// For example, applying a positive scale matrix (see [Matrix4.diagonal3])
/// when used with [BackdropFilter] would magnify the background image.
factory ImageFilter.matrix(Float64List matrix4,
{ FilterQuality filterQuality = FilterQuality.low }) {
if (matrix4.length != 16) {
throw ArgumentError('"matrix4" must have 16 entries.');
}
return _MatrixImageFilter(data: Float64List.fromList(matrix4), filterQuality: filterQuality);
}
/// Composes the `inner` filter with `outer`, to combine their effects.
///
/// Creates a single [ImageFilter] that when applied, has the same effect as
/// subsequently applying `inner` and `outer`, i.e.,
/// result = outer(inner(source)).
factory ImageFilter.compose({ required ImageFilter outer, required ImageFilter inner }) {
return _ComposeImageFilter(innerFilter: inner, outerFilter: outer);
}
// Converts this to a native DlImageFilter. See the comments of this method in
// subclasses for the exact type of DlImageFilter this method converts to.
_ImageFilter _toNativeImageFilter();
// The description text to show when the filter is part of a composite
// [ImageFilter] created using [ImageFilter.compose].
String get _shortDescription;
}
class _MatrixImageFilter implements ImageFilter {
_MatrixImageFilter({ required this.data, required this.filterQuality });
final Float64List data;
final FilterQuality filterQuality;
// MakeMatrixFilterRowMajor255
late final _ImageFilter nativeFilter = _ImageFilter.matrix(this);
@override
_ImageFilter _toNativeImageFilter() => nativeFilter;
@override
String get _shortDescription => 'matrix($data, $filterQuality)';
@override
String toString() => 'ImageFilter.matrix($data, $filterQuality)';
@override
bool operator ==(Object other) {
if (other.runtimeType != runtimeType) {
return false;
}
return other is _MatrixImageFilter
&& other.filterQuality == filterQuality
&& _listEquals<double>(other.data, data);
}
@override
int get hashCode => Object.hash(filterQuality, Object.hashAll(data));
}
class _GaussianBlurImageFilter implements ImageFilter {
_GaussianBlurImageFilter({ required this.sigmaX, required this.sigmaY, required this.tileMode });
final double sigmaX;
final double sigmaY;
final TileMode tileMode;
// MakeBlurFilter
late final _ImageFilter nativeFilter = _ImageFilter.blur(this);
@override
_ImageFilter _toNativeImageFilter() => nativeFilter;
String get _modeString {
switch (tileMode) {
case TileMode.clamp: return 'clamp';
case TileMode.mirror: return 'mirror';
case TileMode.repeated: return 'repeated';
case TileMode.decal: return 'decal';
}
}
@override
String get _shortDescription => 'blur($sigmaX, $sigmaY, $_modeString)';
@override
String toString() => 'ImageFilter.blur($sigmaX, $sigmaY, $_modeString)';
@override
bool operator ==(Object other) {
if (other.runtimeType != runtimeType) {
return false;
}
return other is _GaussianBlurImageFilter
&& other.sigmaX == sigmaX
&& other.sigmaY == sigmaY
&& other.tileMode == tileMode;
}
@override
int get hashCode => Object.hash(sigmaX, sigmaY);
}
class _DilateImageFilter implements ImageFilter {
_DilateImageFilter({ required this.radiusX, required this.radiusY });
final double radiusX;
final double radiusY;
late final _ImageFilter nativeFilter = _ImageFilter.dilate(this);
@override
_ImageFilter _toNativeImageFilter() => nativeFilter;
@override
String get _shortDescription => 'dilate($radiusX, $radiusY)';
@override
String toString() => 'ImageFilter.dilate($radiusX, $radiusY)';
@override
bool operator ==(Object other) {
if (other.runtimeType != runtimeType) {
return false;
}
return other is _DilateImageFilter
&& other.radiusX == radiusX
&& other.radiusY == radiusY;
}
@override
int get hashCode => Object.hash(radiusX, radiusY);
}
class _ErodeImageFilter implements ImageFilter {
_ErodeImageFilter({ required this.radiusX, required this.radiusY });
final double radiusX;
final double radiusY;
late final _ImageFilter nativeFilter = _ImageFilter.erode(this);
@override
_ImageFilter _toNativeImageFilter() => nativeFilter;
@override
String get _shortDescription => 'erode($radiusX, $radiusY)';
@override
String toString() => 'ImageFilter.erode($radiusX, $radiusY)';
@override
bool operator ==(Object other) {
if (other.runtimeType != runtimeType) {
return false;
}
return other is _ErodeImageFilter
&& other.radiusX == radiusX
&& other.radiusY == radiusY;
}
@override
int get hashCode => Object.hash(radiusX, radiusY);
}
class _ComposeImageFilter implements ImageFilter {
_ComposeImageFilter({ required this.innerFilter, required this.outerFilter });
final ImageFilter innerFilter;
final ImageFilter outerFilter;
// DlComposeImageFilter
late final _ImageFilter nativeFilter = _ImageFilter.composed(this);
@override
_ImageFilter _toNativeImageFilter() => nativeFilter;
@override
String get _shortDescription => '${innerFilter._shortDescription} -> ${outerFilter._shortDescription}';
@override
String toString() => 'ImageFilter.compose(source -> $_shortDescription -> result)';
@override
bool operator ==(Object other) {
if (other.runtimeType != runtimeType) {
return false;
}
return other is _ComposeImageFilter
&& other.innerFilter == innerFilter
&& other.outerFilter == outerFilter;
}
@override
int get hashCode => Object.hash(innerFilter, outerFilter);
}
/// An [ImageFilter] that is backed by a native DlImageFilter.
///
/// This is a private class, rather than being the implementation of the public
/// ImageFilter, because we want ImageFilter to be efficiently comparable, so that
/// widgets can check for ImageFilter equality to avoid repainting.
base class _ImageFilter extends NativeFieldWrapperClass1 {
/// Creates an image filter that applies a Gaussian blur.
_ImageFilter.blur(_GaussianBlurImageFilter filter)
: creator = filter {
_constructor();
_initBlur(filter.sigmaX, filter.sigmaY, filter.tileMode.index);
}
/// Creates an image filter that dilates each input pixel's channel values
/// to the max value within the given radii along the x and y axes.
_ImageFilter.dilate(_DilateImageFilter filter)
: creator = filter {
_constructor();
_initDilate(filter.radiusX, filter.radiusY);
}
/// Create a filter that erodes each input pixel's channel values
/// to the minimum channel value within the given radii along the x and y axes.
_ImageFilter.erode(_ErodeImageFilter filter)
: creator = filter {
_constructor();
_initErode(filter.radiusX, filter.radiusY);
}
/// Creates an image filter that applies a matrix transformation.
///
/// For example, applying a positive scale matrix (see [Matrix4.diagonal3])
/// when used with [BackdropFilter] would magnify the background image.
_ImageFilter.matrix(_MatrixImageFilter filter)
: creator = filter {
if (filter.data.length != 16) {
throw ArgumentError('"matrix4" must have 16 entries.');
}
_constructor();
_initMatrix(filter.data, filter.filterQuality.index);
}
/// Converts a color filter to an image filter.
_ImageFilter.fromColorFilter(ColorFilter filter)
: creator = filter {
_constructor();
final _ColorFilter? nativeFilter = filter._toNativeColorFilter();
_initColorFilter(nativeFilter);
}
/// Composes `_innerFilter` with `_outerFilter`.
_ImageFilter.composed(_ComposeImageFilter filter)
: creator = filter {
_constructor();
final _ImageFilter nativeFilterInner = filter.innerFilter._toNativeImageFilter();
final _ImageFilter nativeFilterOuter = filter.outerFilter._toNativeImageFilter();
_initComposed(nativeFilterOuter, nativeFilterInner);
}
@Native<Void Function(Handle)>(symbol: 'ImageFilter::Create')
external void _constructor();
@Native<Void Function(Pointer<Void>, Double, Double, Int32)>(symbol: 'ImageFilter::initBlur', isLeaf: true)
external void _initBlur(double sigmaX, double sigmaY, int tileMode);
@Native<Void Function(Pointer<Void>, Double, Double)>(symbol: 'ImageFilter::initDilate', isLeaf: true)
external void _initDilate(double radiusX, double radiusY);
@Native<Void Function(Pointer<Void>, Double, Double)>(symbol: 'ImageFilter::initErode', isLeaf: true)
external void _initErode(double radiusX, double radiusY);
@Native<Void Function(Pointer<Void>, Handle, Int32)>(symbol: 'ImageFilter::initMatrix')
external void _initMatrix(Float64List matrix4, int filterQuality);
@Native<Void Function(Pointer<Void>, Pointer<Void>)>(symbol: 'ImageFilter::initColorFilter')
external void _initColorFilter(_ColorFilter? colorFilter);
@Native<Void Function(Pointer<Void>, Pointer<Void>, Pointer<Void>)>(symbol: 'ImageFilter::initComposeFilter')
external void _initComposed(_ImageFilter outerFilter, _ImageFilter innerFilter);
/// The original Dart object that created the native wrapper, which retains
/// the values used for the filter.
final ImageFilter creator;
}
/// Base class for objects such as [Gradient] and [ImageShader] which
/// correspond to shaders as used by [Paint.shader].
base class Shader extends NativeFieldWrapperClass1 {
/// This class is created by the engine, and should not be instantiated
/// or extended directly.
@pragma('vm:entry-point')
Shader._();
bool _debugDisposed = false;
/// Whether [dispose] has been called.
///
/// This must only be used when asserts are enabled. Otherwise, it will throw.
bool get debugDisposed {
late bool disposed;
assert(() {
disposed = _debugDisposed;
return true;
}());
return disposed;
}
/// Release the resources used by this object. The object is no longer usable
/// after this method is called.
///
/// The underlying memory allocated by this object will be retained beyond
/// this call if it is still needed by another object that has not been
/// disposed. For example, a [Picture] that has not been disposed that
/// refers to an [ImageShader] may keep its underlying resources alive.
///
/// Classes that override this method must call `super.dispose()`.
void dispose() {
assert(() {
assert(!_debugDisposed);
_debugDisposed = true;
return true;
}());
}
}
/// Defines what happens at the edge of a gradient or the sampling of a source image
/// in an [ImageFilter].
///
/// A gradient is defined along a finite inner area. In the case of a linear
/// gradient, it's between the parallel lines that are orthogonal to the line
/// drawn between two points. In the case of radial gradients, it's the disc
/// that covers the circle centered on a particular point up to a given radius.
///
/// An image filter reads source samples from a source image and performs operations
/// on those samples to produce a result image. An image defines color samples only
/// for pixels within the bounds of the image but some filter operations, such as a blur
/// filter, read samples over a wide area to compute the output for a given pixel. Such
/// a filter would need to combine samples from inside the image with hypothetical
/// color values from outside the image.
///
/// This enum is used to define how the gradient or image filter should treat the regions
/// outside that defined inner area.
///
/// See also:
///
/// * [painting.Gradient], the superclass for [LinearGradient] and
/// [RadialGradient], as used by [BoxDecoration] et al, which works in
/// relative coordinates and can create a [Shader] representing the gradient
/// for a particular [Rect] on demand.
/// * [dart:ui.Gradient], the low-level class used when dealing with the
/// [Paint.shader] property directly, with its [Gradient.linear] and
/// [Gradient.radial] constructors.
/// * [dart:ui.ImageFilter.blur], an ImageFilter that may sometimes need to
/// read samples from outside an image to combine with the pixels near the
/// edge of the image.
// These enum values must be kept in sync with DlTileMode.
enum TileMode {
/// Samples beyond the edge are clamped to the nearest color in the defined inner area.
///
/// A gradient will paint all the regions outside the inner area with the
/// color at the end of the color stop list closest to that region.
///
/// An image filter will substitute the nearest edge pixel for any samples taken from
/// outside its source image.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_clamp_linear.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_clamp_radial.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_clamp_sweep.png)
clamp,
/// Samples beyond the edge are repeated from the far end of the defined area.
///
/// For a gradient, this technique is as if the stop points from 0.0 to 1.0 were then
/// repeated from 1.0 to 2.0, 2.0 to 3.0, and so forth (and for linear gradients, similarly
/// from -1.0 to 0.0, -2.0 to -1.0, etc).
///
/// An image filter will treat its source image as if it were tiled across the enlarged
/// sample space from which it reads, each tile in the same orientation as the base image.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_repeated_linear.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_repeated_radial.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_repeated_sweep.png)
repeated,
/// Samples beyond the edge are mirrored back and forth across the defined area.
///
/// For a gradient, this technique is as if the stop points from 0.0 to 1.0 were then
/// repeated backwards from 2.0 to 1.0, then forwards from 2.0 to 3.0, then backwards
/// again from 4.0 to 3.0, and so forth (and for linear gradients, similarly in the
/// negative direction).
///
/// An image filter will treat its source image as tiled in an alternating forwards and
/// backwards or upwards and downwards direction across the sample space from which
/// it is reading.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_mirror_linear.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_mirror_radial.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_mirror_sweep.png)
mirror,
/// Samples beyond the edge are treated as transparent black.
///
/// A gradient will render transparency over any region that is outside the circle of a
/// radial gradient or outside the parallel lines that define the inner area of a linear
/// gradient.
///
/// An image filter will substitute transparent black for any sample it must read from
/// outside its source image.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_decal_linear.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_decal_radial.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_decal_sweep.png)
decal,
}
Int32List _encodeColorList(List<Color> colors) {
final int colorCount = colors.length;
final Int32List result = Int32List(colorCount);
for (int i = 0; i < colorCount; ++i) {
result[i] = colors[i].value;
}
return result;
}
Float32List _encodePointList(List<Offset> points) {
final int pointCount = points.length;
final Float32List result = Float32List(pointCount * 2);
for (int i = 0; i < pointCount; ++i) {
final int xIndex = i * 2;
final int yIndex = xIndex + 1;
final Offset point = points[i];
assert(_offsetIsValid(point));
result[xIndex] = point.dx;
result[yIndex] = point.dy;
}
return result;
}
Float32List _encodeTwoPoints(Offset pointA, Offset pointB) {
assert(_offsetIsValid(pointA));
assert(_offsetIsValid(pointB));
final Float32List result = Float32List(4);
result[0] = pointA.dx;
result[1] = pointA.dy;
result[2] = pointB.dx;
result[3] = pointB.dy;
return result;
}
/// A shader (as used by [Paint.shader]) that renders a color gradient.
///
/// There are several types of gradients, represented by the various constructors
/// on this class.
///
/// See also:
///
/// * [Gradient](https://api.flutter.dev/flutter/painting/Gradient-class.html), the class in the [painting] library.
///
base class Gradient extends Shader {
/// Creates a linear gradient from `from` to `to`.
///
/// If `colorStops` is provided, `colorStops[i]` is a number from 0.0 to 1.0
/// that specifies where `color[i]` begins in the gradient. If `colorStops` is
/// not provided, then only two stops, at 0.0 and 1.0, are implied (and
/// `color` must therefore only have two entries).
///
/// The behavior before `from` and after `to` is described by the `tileMode`
/// argument. For details, see the [TileMode] enum.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_clamp_linear.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_decal_linear.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_mirror_linear.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_repeated_linear.png)
///
/// If `from`, `to`, `colors`, or `tileMode` are null, or if `colors` or
/// `colorStops` contain null values, this constructor will throw a
/// [NoSuchMethodError].
///
/// If `matrix4` is provided, the gradient fill will be transformed by the
/// specified 4x4 matrix relative to the local coordinate system. `matrix4` must
/// be a column-major matrix packed into a list of 16 values.
Gradient.linear(
Offset from,
Offset to,
List<Color> colors, [
List<double>? colorStops,
TileMode tileMode = TileMode.clamp,
Float64List? matrix4,
]) : assert(_offsetIsValid(from)),
assert(_offsetIsValid(to)),
assert(matrix4 == null || _matrix4IsValid(matrix4)),
super._() {
_validateColorStops(colors, colorStops);
final Float32List endPointsBuffer = _encodeTwoPoints(from, to);
final Int32List colorsBuffer = _encodeColorList(colors);
final Float32List? colorStopsBuffer = colorStops == null ? null : Float32List.fromList(colorStops);
_constructor();
_initLinear(endPointsBuffer, colorsBuffer, colorStopsBuffer, tileMode.index, matrix4);
}
/// Creates a radial gradient centered at `center` that ends at `radius`
/// distance from the center.
///
/// If `colorStops` is provided, `colorStops[i]` is a number from 0.0 to 1.0
/// that specifies where `color[i]` begins in the gradient. If `colorStops` is
/// not provided, then only two stops, at 0.0 and 1.0, are implied (and
/// `color` must therefore only have two entries).
///
/// The behavior before and after the radius is described by the `tileMode`
/// argument. For details, see the [TileMode] enum.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_clamp_radial.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_decal_radial.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_mirror_radial.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_repeated_radial.png)
///
/// If `center`, `radius`, `colors`, or `tileMode` are null, or if `colors` or
/// `colorStops` contain null values, this constructor will throw a
/// [NoSuchMethodError].
///
/// If `matrix4` is provided, the gradient fill will be transformed by the
/// specified 4x4 matrix relative to the local coordinate system. `matrix4` must
/// be a column-major matrix packed into a list of 16 values.
///
/// If `focal` is provided and not equal to `center` and `focalRadius` is
/// provided and not equal to 0.0, the generated shader will be a two point
/// conical radial gradient, with `focal` being the center of the focal
/// circle and `focalRadius` being the radius of that circle. If `focal` is
/// provided and not equal to `center`, at least one of the two offsets must
/// not be equal to [Offset.zero].
Gradient.radial(
Offset center,
double radius,
List<Color> colors, [
List<double>? colorStops,
TileMode tileMode = TileMode.clamp,
Float64List? matrix4,
Offset? focal,
double focalRadius = 0.0
]) : assert(_offsetIsValid(center)),
assert(matrix4 == null || _matrix4IsValid(matrix4)),
super._() {
_validateColorStops(colors, colorStops);
final Int32List colorsBuffer = _encodeColorList(colors);
final Float32List? colorStopsBuffer = colorStops == null ? null : Float32List.fromList(colorStops);
// If focal is null or focal radius is null, this should be treated as a regular radial gradient
// If focal == center and the focal radius is 0.0, it's still a regular radial gradient
if (focal == null || (focal == center && focalRadius == 0.0)) {
_constructor();
_initRadial(center.dx, center.dy, radius, colorsBuffer, colorStopsBuffer, tileMode.index, matrix4);
} else {
assert(center != Offset.zero || focal != Offset.zero); // will result in exception(s) in Skia side
_constructor();
_initConical(focal.dx, focal.dy, focalRadius, center.dx, center.dy, radius, colorsBuffer, colorStopsBuffer, tileMode.index, matrix4);
}
}
/// Creates a sweep gradient centered at `center` that starts at `startAngle`
/// and ends at `endAngle`.
///
/// `startAngle` and `endAngle` should be provided in radians, with zero
/// radians being the horizontal line to the right of the `center` and with
/// positive angles going clockwise around the `center`.
///
/// If `colorStops` is provided, `colorStops[i]` is a number from 0.0 to 1.0
/// that specifies where `color[i]` begins in the gradient. If `colorStops` is
/// not provided, then only two stops, at 0.0 and 1.0, are implied (and
/// `color` must therefore only have two entries).
///
/// The behavior before `startAngle` and after `endAngle` is described by the
/// `tileMode` argument. For details, see the [TileMode] enum.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_clamp_sweep.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_decal_sweep.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_mirror_sweep.png)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/tile_mode_repeated_sweep.png)
///
/// If `center`, `colors`, `tileMode`, `startAngle`, or `endAngle` are null,
/// or if `colors` or `colorStops` contain null values, this constructor will
/// throw a [NoSuchMethodError].
///
/// If `matrix4` is provided, the gradient fill will be transformed by the
/// specified 4x4 matrix relative to the local coordinate system. `matrix4` must
/// be a column-major matrix packed into a list of 16 values.
Gradient.sweep(
Offset center,
List<Color> colors, [
List<double>? colorStops,
TileMode tileMode = TileMode.clamp,
double startAngle = 0.0,
double endAngle = math.pi * 2,
Float64List? matrix4,
]) : assert(_offsetIsValid(center)),
assert(startAngle < endAngle),
assert(matrix4 == null || _matrix4IsValid(matrix4)),
super._() {
_validateColorStops(colors, colorStops);
final Int32List colorsBuffer = _encodeColorList(colors);
final Float32List? colorStopsBuffer = colorStops == null ? null : Float32List.fromList(colorStops);
_constructor();
_initSweep(center.dx, center.dy, colorsBuffer, colorStopsBuffer, tileMode.index, startAngle, endAngle, matrix4);
}
@Native<Void Function(Handle)>(symbol: 'Gradient::Create')
external void _constructor();
@Native<Void Function(Pointer<Void>, Handle, Handle, Handle, Int32, Handle)>(symbol: 'Gradient::initLinear')
external void _initLinear(Float32List endPoints, Int32List colors, Float32List? colorStops, int tileMode, Float64List? matrix4);
@Native<Void Function(Pointer<Void>, Double, Double, Double, Handle, Handle, Int32, Handle)>(symbol: 'Gradient::initRadial')
external void _initRadial(
double centerX,
double centerY,
double radius,
Int32List colors,
Float32List? colorStops,
int tileMode,
Float64List? matrix4);
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Double, Double, Handle, Handle, Int32, Handle)>(symbol: 'Gradient::initTwoPointConical')
external void _initConical(
double startX,
double startY,
double startRadius,
double endX,
double endY,
double endRadius,
Int32List colors,
Float32List? colorStops,
int tileMode,
Float64List? matrix4);
@Native<Void Function(Pointer<Void>, Double, Double, Handle, Handle, Int32, Double, Double, Handle)>(symbol: 'Gradient::initSweep')
external void _initSweep(
double centerX,
double centerY,
Int32List colors,
Float32List? colorStops,
int tileMode,
double startAngle,
double endAngle,
Float64List? matrix);
static void _validateColorStops(
List<Color> colors, List<double>? colorStops) {
if (colorStops == null) {
if (colors.length != 2) {
throw ArgumentError('"colors" must have length 2 if "colorStops" is omitted.');
}
} else {
if (colors.length != colorStops.length) {
throw ArgumentError('"colors" and "colorStops" arguments must have equal length.');
}
}
}
}
/// A shader (as used by [Paint.shader]) that tiles an image.
base class ImageShader extends Shader {
/// Creates an image-tiling shader.
///
/// The first argument specifies the image to render. The
/// [decodeImageFromList] function can be used to decode an image from bytes
/// into the form expected here. (In production code, starting from
/// [instantiateImageCodec] may be preferable.)
///
/// The second and third arguments specify the [TileMode] for the x direction
/// and y direction respectively. [TileMode.repeated] can be used for tiling
/// images.
///
/// The fourth argument gives the matrix to apply to the effect. The
/// expression `Matrix4.identity().storage` creates a [Float64List]
/// prepopulated with the identity matrix.
///
/// All the arguments are required and must not be null, except for
/// [filterQuality]. If [filterQuality] is not specified at construction time
/// it will be deduced from the environment where it is used, such as from
/// [Paint.filterQuality].
@pragma('vm:entry-point')
ImageShader(Image image, TileMode tmx, TileMode tmy, Float64List matrix4, {
FilterQuality? filterQuality,
}) :
assert(!image.debugDisposed),
super._() {
if (matrix4.length != 16) {
throw ArgumentError('"matrix4" must have 16 entries.');
}
_constructor();
final String? error = _initWithImage(image._image, tmx.index, tmy.index, filterQuality?.index ?? -1, matrix4);
if (error != null) {
throw Exception(error);
}
}
@override
void dispose() {
super.dispose();
_dispose();
}
@Native<Void Function(Handle)>(symbol: 'ImageShader::Create')
external void _constructor();
@Native<Handle Function(Pointer<Void>, Pointer<Void>, Int32, Int32, Int32, Handle)>(symbol: 'ImageShader::initWithImage')
external String? _initWithImage(_Image image, int tmx, int tmy, int filterQualityIndex, Float64List matrix4);
/// This can't be a leaf call because the native function calls Dart API
/// (Dart_SetNativeInstanceField).
@Native<Void Function(Pointer<Void>)>(symbol: 'ImageShader::dispose')
external void _dispose();
}
/// An instance of [FragmentProgram] creates [Shader] objects (as used by
/// [Paint.shader]).
///
/// For more information, see the website
/// [documentation]( https://docs.flutter.dev/development/ui/advanced/shaders).
base class FragmentProgram extends NativeFieldWrapperClass1 {
@pragma('vm:entry-point')
FragmentProgram._fromAsset(String assetKey) {
_constructor();
final String result = _initFromAsset(assetKey);
if (result.isNotEmpty) {
throw Exception(result);
}
assert(() {
_debugName = assetKey;
return true;
}());
}
String? _debugName;
/// Creates a fragment program from the asset with key [assetKey].
///
/// The asset must be a file produced as the output of the `impellerc`
/// compiler. The constructed object should then be reused via the
/// [fragmentShader] method to create [Shader] objects that can be used by
/// [Paint.shader].
static Future<FragmentProgram> fromAsset(String assetKey) {
// The flutter tool converts all asset keys with spaces into URI
// encoded paths (replacing ' ' with '%20', for example). We perform
// the same encoding here so that users can load assets with the same
// key they have written in the pubspec.
final String encodedKey = Uri(path: Uri.encodeFull(assetKey)).path;
final FragmentProgram? program = _shaderRegistry[encodedKey]?.target;
if (program != null) {
return Future<FragmentProgram>.value(program);
}
return Future<FragmentProgram>.microtask(() {
final FragmentProgram program = FragmentProgram._fromAsset(encodedKey);
_shaderRegistry[encodedKey] = WeakReference<FragmentProgram>(program);
return program;
});
}
// This is a cache of shaders that have been loaded by
// FragmentProgram.fromAsset. It holds weak references to the FragmentPrograms
// so that the case where an in-use program is requested again can be fast,
// but programs that are no longer referenced are not retained because of the
// cache.
static final Map<String, WeakReference<FragmentProgram>> _shaderRegistry =
<String, WeakReference<FragmentProgram>>{};
static void _reinitializeShader(String assetKey) {
// If a shader for the asset isn't already registered, then there's no
// need to reinitialize it. The new shader will be loaded and initialized
// the next time the program access it.
final WeakReference<FragmentProgram>? programRef = _shaderRegistry[assetKey];
if (programRef == null) {
return;
}
final FragmentProgram? program = programRef.target;
if (program == null) {
return;
}
final String result = program._initFromAsset(assetKey);
if (result.isNotEmpty) {
throw result; // ignore: only_throw_errors
}
}
@pragma('vm:entry-point')
late int _uniformFloatCount;
@pragma('vm:entry-point')
late int _samplerCount;
@Native<Void Function(Handle)>(symbol: 'FragmentProgram::Create')
external void _constructor();
@Native<Handle Function(Pointer<Void>, Handle)>(symbol: 'FragmentProgram::initFromAsset')
external String _initFromAsset(String assetKey);
/// Returns a fresh instance of [FragmentShader].
FragmentShader fragmentShader() => FragmentShader._(this, debugName: _debugName);
}
/// A [Shader] generated from a [FragmentProgram].
///
/// Instances of this class can be obtained from the
/// [FragmentProgram.fragmentShader] method. The float uniforms list is
/// initialized to the size expected by the shader and is zero-filled. Uniforms
/// of float type can then be set by calling [setFloat]. Sampler uniforms are
/// set by calling [setImageSampler].
///
/// A [FragmentShader] can be re-used, and this is an efficient way to avoid
/// allocating and re-initializing the uniform buffer and samplers. However,
/// if two [FragmentShader] objects with different float uniforms or samplers
/// are required to exist simultaneously, they must be obtained from two
/// different calls to [FragmentProgram.fragmentShader].
base class FragmentShader extends Shader {
FragmentShader._(FragmentProgram program, { String? debugName }) : _debugName = debugName, super._() {
_floats = _constructor(
program,
program._uniformFloatCount,
program._samplerCount,
);
}
final String? _debugName;
static final Float32List _kEmptyFloat32List = Float32List(0);
Float32List _floats = _kEmptyFloat32List;
/// Sets the float uniform at [index] to [value].
///
/// All uniforms defined in a fragment shader that are not samplers must be
/// set through this method. This includes floats and vec2, vec3, and vec4.
/// The correct index for each uniform is determined by the order of the
/// uniforms as defined in the fragment program, ignoring any samplers. For
/// data types that are composed of multiple floats such as a vec4, more than
/// one call to [setFloat] is required.
///
/// For example, given the following uniforms in a fragment program:
///
/// ```glsl
/// uniform float uScale;
/// uniform sampler2D uTexture;
/// uniform vec2 uMagnitude;
/// uniform vec4 uColor;
/// ```
///
/// Then the corresponding Dart code to correctly initialize these uniforms
/// is:
///
/// ```dart
/// void updateShader(ui.FragmentShader shader, Color color, ui.Image image) {
/// shader.setFloat(0, 23); // uScale
/// shader.setFloat(1, 114); // uMagnitude x
/// shader.setFloat(2, 83); // uMagnitude y
///
/// // Convert color to premultiplied opacity.
/// shader.setFloat(3, color.red / 255 * color.opacity); // uColor r
/// shader.setFloat(4, color.green / 255 * color.opacity); // uColor g
/// shader.setFloat(5, color.blue / 255 * color.opacity); // uColor b
/// shader.setFloat(6, color.opacity); // uColor a
///
/// // initialize sampler uniform.
/// shader.setImageSampler(0, image);
/// }
/// ```
///
/// Note how the indexes used does not count the `sampler2D` uniform. This
/// uniform will be set separately with [setImageSampler], with the index starting
/// over at 0.
///
/// Any float uniforms that are left uninitialized will default to `0`.
void setFloat(int index, double value) {
assert(!debugDisposed, 'Tried to accesss uniforms on a disposed Shader: $this');
_floats[index] = value;
}
/// Sets the sampler uniform at [index] to [image].
///
/// The index provided to setImageSampler is the index of the sampler uniform defined
/// in the fragment program, excluding all non-sampler uniforms.
///
/// All the sampler uniforms that a shader expects must be provided or the
/// results will be undefined.
void setImageSampler(int index, Image image) {
assert(!debugDisposed, 'Tried to access uniforms on a disposed Shader: $this');
_setImageSampler(index, image._image);
}
/// Releases the native resources held by the [FragmentShader].
///
/// After this method is called, calling methods on the shader, or attaching
/// it to a [Paint] object will fail with an exception. Calling [dispose]
/// twice will also result in an exception being thrown.
@override
void dispose() {
super.dispose();
_floats = _kEmptyFloat32List;
_dispose();
}
@Native<Handle Function(Handle, Handle, Handle, Handle)>(symbol: 'ReusableFragmentShader::Create')
external Float32List _constructor(FragmentProgram program, int floatUniforms, int samplerUniforms);
@Native<Void Function(Pointer<Void>, Handle, Handle)>(symbol: 'ReusableFragmentShader::SetImageSampler')
external void _setImageSampler(int index, _Image sampler);
@Native<Bool Function(Pointer<Void>)>(symbol: 'ReusableFragmentShader::ValidateSamplers')
external bool _validateSamplers();
@Native<Void Function(Pointer<Void>)>(symbol: 'ReusableFragmentShader::Dispose')
external void _dispose();
}
/// Defines how a list of points is interpreted when drawing a set of triangles.
///
/// Used by [Canvas.drawVertices].
// These enum values must be kept in sync with DlVertexMode.
enum VertexMode {
/// Draw each sequence of three points as the vertices of a triangle.
triangles,
/// Draw each sliding window of three points as the vertices of a triangle.
triangleStrip,
/// Draw the first point and each sliding window of two points as the vertices
/// of a triangle.
///
/// This mode is not natively supported by most backends, and is instead
/// implemented by unrolling the points into the equivalent
/// [VertexMode.triangles], which is generally more efficient.
triangleFan,
}
/// A set of vertex data used by [Canvas.drawVertices].
///
/// Vertex data consists of a series of points in the canvas coordinate space.
/// Based on the [VertexMode], these points are interpreted either as
/// independent triangles ([VertexMode.triangles]), as a sliding window of
/// points forming a chain of triangles each sharing one side with the next
/// ([VertexMode.triangleStrip]), or as a fan of triangles with a single shared
/// point ([VertexMode.triangleFan]).
///
/// Each point can be associated with a color. Each triangle is painted as a
/// gradient that blends between the three colors at the three points of that
/// triangle. If no colors are specified, transparent black is assumed for all
/// the points.
///
/// These colors are then blended with the [Paint] specified in the call to
/// [Canvas.drawVertices]. This paint is either a solid color ([Paint.color]),
/// or a bitmap, specified using a shader ([Paint.shader]), typically either a
/// gradient ([Gradient]) or image ([ImageFilter]). The bitmap uses the same
/// coordinate space as the canvas (in the case of an [ImageFilter], this is
/// notably different than the coordinate space of the source image; the source
/// image is tiled according to the filter's configuration, and the image that
/// is sampled when painting the triangles is the infinite one after all the
/// repeating is applied.)
///
/// Each point in the [Vertices] is associated with a specific point on this
/// image. Each triangle is painted by sampling points from this image by
/// interpolating between the three points of the image corresponding to the
/// three points of the triangle.
///
/// The [Vertices.new] constructor configures all this using lists of [Offset]
/// and [Color] objects. The [Vertices.raw] constructor instead uses
/// [Float32List], [Int32List], and [Uint16List] objects, which more closely
/// corresponds to the data format used internally and therefore reduces some of
/// the conversion overhead. The raw constructor is useful if the data is coming
/// from another source (e.g. a file) and can therefore be parsed directly into
/// the underlying representation.
base class Vertices extends NativeFieldWrapperClass1 {
/// Creates a set of vertex data for use with [Canvas.drawVertices].
///
/// The `mode` parameter describes how the points should be interpreted: as
/// independent triangles ([VertexMode.triangles]), as a sliding window of
/// points forming a chain of triangles each sharing one side with the next
/// ([VertexMode.triangleStrip]), or as a fan of triangles with a single
/// shared point ([VertexMode.triangleFan]).
///
/// The `positions` parameter provides the points in the canvas space that
/// will be use to draw the triangles.
///
/// The `colors` parameter, if specified, provides the color for each point in
/// `positions`. Each triangle is painted as a gradient that blends between
/// the three colors at the three points of that triangle. (These colors are
/// then blended with the [Paint] specified in the call to
/// [Canvas.drawVertices].)
///
/// The `textureCoordinates` parameter, if specified, provides the points in
/// the [Paint] image to sample for the corresponding points in `positions`.
///
/// If the `colors` or `textureCoordinates` parameters are specified, they must
/// be the same length as `positions`.
///
/// The `indices` parameter specifies the order in which the points should be
/// painted. If it is omitted (or present but empty), the points are processed
/// in the order they are given in `positions`, as if the `indices` was a list
/// from 0 to n-1, where _n_ is the number of entries in `positions`. The
/// `indices` parameter, if present and non-empty, must have at least three
/// entries, but may be of any length beyond this. Indicies may refer to
/// offsets in the positions array multiple times, or may skip positions
/// entirely.
///
/// If the `indices` parameter is specified, all values in the list must be
/// valid index values for `positions`.
///
/// The `mode` and `positions` parameters must not be null.
///
/// This constructor converts its parameters into [dart:typed_data] lists
/// (e.g. using [Float32List]s for the coordinates) before sending them to the
/// Flutter engine. If the data provided to this constructor is not already in
/// [List] form, consider using the [Vertices.raw] constructor instead to
/// avoid converting the data twice.
Vertices(
VertexMode mode,
List<Offset> positions, {
List<Color>? colors,
List<Offset>? textureCoordinates,
List<int>? indices,
}) {
if (colors != null && colors.length != positions.length) {
throw ArgumentError('"positions" and "colors" lengths must match.');
}
if (textureCoordinates != null && textureCoordinates.length != positions.length) {
throw ArgumentError('"positions" and "textureCoordinates" lengths must match.');
}
if (indices != null) {
for (int index = 0; index < indices.length; index += 1) {
if (indices[index] >= positions.length) {
throw ArgumentError(
'"indices" values must be valid indices in the positions list '
'(i.e. numbers in the range 0..${positions.length - 1}), '
'but indices[$index] is ${indices[index]}, which is too big.',
);
}
}
}
final Float32List encodedPositions = _encodePointList(positions);
final Float32List? encodedTextureCoordinates = (textureCoordinates != null)
? _encodePointList(textureCoordinates)
: null;
final Int32List? encodedColors = colors != null
? _encodeColorList(colors)
: null;
final Uint16List? encodedIndices = indices != null
? Uint16List.fromList(indices)
: null;
if (!_init(this, mode.index, encodedPositions, encodedTextureCoordinates, encodedColors, encodedIndices)) {
throw ArgumentError('Invalid configuration for vertices.');
}
}
/// Creates a set of vertex data for use with [Canvas.drawVertices], using the
/// encoding expected by the Flutter engine.
///
/// The `mode` parameter describes how the points should be interpreted: as
/// independent triangles ([VertexMode.triangles]), as a sliding window of
/// points forming a chain of triangles each sharing one side with the next
/// ([VertexMode.triangleStrip]), or as a fan of triangles with a single
/// shared point ([VertexMode.triangleFan]).
///
/// The `positions` parameter provides the points in the canvas space that
/// will be use to draw the triangles. Each point is represented as two
/// numbers in the list, the first giving the x coordinate and the second
/// giving the y coordinate. (As a result, the list must have an even number
/// of entries.)
///
/// The `colors` parameter, if specified, provides the color for each point in
/// `positions`. Each color is represented as ARGB with 8 bit color channels
/// (like [Color.value]'s internal representation), and the list, if
/// specified, must therefore be half the length of `positions`. Each triangle
/// is painted as a gradient that blends between the three colors at the three
/// points of that triangle. (These colors are then blended with the [Paint]
/// specified in the call to [Canvas.drawVertices].)
///
/// The `textureCoordinates` parameter, if specified, provides the points in
/// the [Paint] image to sample for the corresponding points in `positions`.
/// Each point is represented as two numbers in the list, the first giving the
/// x coordinate and the second giving the y coordinate. This list, if
/// specified, must be the same length as `positions`.
///
/// The `indices` parameter specifies the order in which the points should be
/// painted. If it is omitted (or present but empty), the points are processed
/// in the order they are given in `positions`, as if the `indices` was a list
/// from 0 to n-2, where _n_ is the number of pairs in `positions` (i.e. half
/// the length of `positions`). The `indices` parameter, if present and
/// non-empty, must have at least three entries, but may be of any length
/// beyond this. Indicies may refer to offsets in the positions array multiple
/// times, or may skip positions entirely.
///
/// If the `indices` parameter is specified, all values in the list must be
/// valid index values for pairs in `positions`. For example, if there are 12
/// numbers in `positions` (representing 6 coordinates), the `indicies` must
/// be numbers in the range 0..5 inclusive.
///
/// The `mode` and `positions` parameters must not be null.
Vertices.raw(
VertexMode mode,
Float32List positions, {
Int32List? colors,
Float32List? textureCoordinates,
Uint16List? indices,
}) {
if (positions.length % 2 != 0) {
throw ArgumentError('"positions" must have an even number of entries (each coordinate is an x,y pair).');
}
if (colors != null && colors.length * 2 != positions.length) {
throw ArgumentError('"positions" and "colors" lengths must match.');
}
if (textureCoordinates != null && textureCoordinates.length != positions.length) {
throw ArgumentError('"positions" and "textureCoordinates" lengths must match.');
}
if (indices != null) {
for (int index = 0; index < indices.length; index += 1) {
if (indices[index] * 2 >= positions.length) {
throw ArgumentError(
'"indices" values must be valid indices in the positions list '
'(i.e. numbers in the range 0..${positions.length ~/ 2 - 1}), '
'but indices[$index] is ${indices[index]}, which is too big.',
);
}
}
}
if (!_init(this, mode.index, positions, textureCoordinates, colors, indices)) {
throw ArgumentError('Invalid configuration for vertices.');
}
}
@Native<Bool Function(Handle, Int32, Handle, Handle, Handle, Handle)>(symbol: 'Vertices::init')
external static bool _init(Vertices outVertices,
int mode,
Float32List positions,
Float32List? textureCoordinates,
Int32List? colors,
Uint16List? indices);
/// Release the resources used by this object. The object is no longer usable
/// after this method is called.
void dispose() {
assert(!_disposed);
assert(() {
_disposed = true;
return true;
}());
_dispose();
}
/// This can't be a leaf call because the native function calls Dart API
/// (Dart_SetNativeInstanceField).
@Native<Void Function(Pointer<Void>)>(symbol: 'Vertices::dispose')
external void _dispose();
bool _disposed = false;
/// Whether this reference to the underlying vertex data is [dispose]d.
///
/// This only returns a valid value if asserts are enabled, and must not be
/// used otherwise.
bool get debugDisposed {
bool? disposed;
assert(() {
disposed = _disposed;
return true;
}());
return disposed ?? (throw StateError('Vertices.debugDisposed is only available when asserts are enabled.'));
}
}
/// Defines how a list of points is interpreted when drawing a set of points.
///
/// Used by [Canvas.drawPoints] and [Canvas.drawRawPoints].
// These enum values must be kept in sync with DlCanvas::PointMode.
enum PointMode {
/// Draw each point separately.
///
/// If the [Paint.strokeCap] is [StrokeCap.round], then each point is drawn
/// as a circle with the diameter of the [Paint.strokeWidth], filled as
/// described by the [Paint] (ignoring [Paint.style]).
///
/// Otherwise, each point is drawn as an axis-aligned square with sides of
/// length [Paint.strokeWidth], filled as described by the [Paint] (ignoring
/// [Paint.style]).
points,
/// Draw each sequence of two points as a line segment.
///
/// If the number of points is odd, then the last point is ignored.
///
/// The lines are stroked as described by the [Paint] (ignoring
/// [Paint.style]).
lines,
/// Draw the entire sequence of points as one line.
///
/// The lines are stroked as described by the [Paint] (ignoring
/// [Paint.style]).
polygon,
}
/// Defines how a new clip region should be merged with the existing clip
/// region.
///
/// Used by [Canvas.clipRect].
enum ClipOp {
/// Subtract the new region from the existing region.
difference,
/// Intersect the new region from the existing region.
intersect,
}
/// An interface for recording graphical operations.
///
/// [Canvas] objects are used in creating [Picture] objects, which can
/// themselves be used with a [SceneBuilder] to build a [Scene]. In
/// normal usage, however, this is all handled by the framework.
///
/// A canvas has a current transformation matrix which is applied to all
/// operations. Initially, the transformation matrix is the identity transform.
/// It can be modified using the [translate], [scale], [rotate], [skew],
/// and [transform] methods.
///
/// A canvas also has a current clip region which is applied to all operations.
/// Initially, the clip region is infinite. It can be modified using the
/// [clipRect], [clipRRect], and [clipPath] methods.
///
/// The current transform and clip can be saved and restored using the stack
/// managed by the [save], [saveLayer], and [restore] methods.
abstract class Canvas {
/// Creates a canvas for recording graphical operations into the
/// given picture recorder.
///
/// Graphical operations that affect pixels entirely outside the given
/// `cullRect` might be discarded by the implementation. However, the
/// implementation might draw outside these bounds if, for example, a command
/// draws partially inside and outside the `cullRect`. To ensure that pixels
/// outside a given region are discarded, consider using a [clipRect]. The
/// `cullRect` is optional; by default, all operations are kept.
///
/// To end the recording, call [PictureRecorder.endRecording] on the
/// given recorder.
factory Canvas(PictureRecorder recorder, [ Rect? cullRect ]) = _NativeCanvas;
/// Saves a copy of the current transform and clip on the save stack.
///
/// Call [restore] to pop the save stack.
///
/// See also:
///
/// * [saveLayer], which does the same thing but additionally also groups the
/// commands done until the matching [restore].
void save();
/// Saves a copy of the current transform and clip on the save stack, and then
/// creates a new group which subsequent calls will become a part of. When the
/// save stack is later popped, the group will be flattened into a layer and
/// have the given `paint`'s [Paint.colorFilter] and [Paint.blendMode]
/// applied.
///
/// This lets you create composite effects, for example making a group of
/// drawing commands semi-transparent. Without using [saveLayer], each part of
/// the group would be painted individually, so where they overlap would be
/// darker than where they do not. By using [saveLayer] to group them
/// together, they can be drawn with an opaque color at first, and then the
/// entire group can be made transparent using the [saveLayer]'s paint.
///
/// Call [restore] to pop the save stack and apply the paint to the group.
///
/// ## Using saveLayer with clips
///
/// When a rectangular clip operation (from [clipRect]) is not axis-aligned
/// with the raster buffer, or when the clip operation is not rectilinear
/// (e.g. because it is a rounded rectangle clip created by [clipRRect] or an
/// arbitrarily complicated path clip created by [clipPath]), the edge of the
/// clip needs to be anti-aliased.
///
/// If two draw calls overlap at the edge of such a clipped region, without
/// using [saveLayer], the first drawing will be anti-aliased with the
/// background first, and then the second will be anti-aliased with the result
/// of blending the first drawing and the background. On the other hand, if
/// [saveLayer] is used immediately after establishing the clip, the second
/// drawing will cover the first in the layer, and thus the second alone will
/// be anti-aliased with the background when the layer is clipped and
/// composited (when [restore] is called).
///
/// For example, this [CustomPainter.paint] method paints a clean white
/// rounded rectangle:
///
/// ```dart
/// void paint(Canvas canvas, Size size) {
/// Rect rect = Offset.zero & size;
/// canvas.save();
/// canvas.clipRRect(RRect.fromRectXY(rect, 100.0, 100.0));
/// canvas.saveLayer(rect, Paint());
/// canvas.drawPaint(Paint()..color = Colors.red);
/// canvas.drawPaint(Paint()..color = Colors.white);
/// canvas.restore();
/// canvas.restore();
/// }
/// ```
///
/// On the other hand, this one renders a red outline, the result of the red
/// paint being anti-aliased with the background at the clip edge, then the
/// white paint being similarly anti-aliased with the background _including
/// the clipped red paint_:
///
/// ```dart
/// void paint(Canvas canvas, Size size) {
/// // (this example renders poorly, prefer the example above)
/// Rect rect = Offset.zero & size;
/// canvas.save();
/// canvas.clipRRect(RRect.fromRectXY(rect, 100.0, 100.0));
/// canvas.drawPaint(Paint()..color = Colors.red);
/// canvas.drawPaint(Paint()..color = Colors.white);
/// canvas.restore();
/// }
/// ```
///
/// This point is moot if the clip only clips one draw operation. For example,
/// the following paint method paints a pair of clean white rounded
/// rectangles, even though the clips are not done on a separate layer:
///
/// ```dart
/// void paint(Canvas canvas, Size size) {
/// canvas.save();
/// canvas.clipRRect(RRect.fromRectXY(Offset.zero & (size / 2.0), 50.0, 50.0));
/// canvas.drawPaint(Paint()..color = Colors.white);
/// canvas.restore();
/// canvas.save();
/// canvas.clipRRect(RRect.fromRectXY(size.center(Offset.zero) & (size / 2.0), 50.0, 50.0));
/// canvas.drawPaint(Paint()..color = Colors.white);
/// canvas.restore();
/// }
/// ```
///
/// (Incidentally, rather than using [clipRRect] and [drawPaint] to draw
/// rounded rectangles like this, prefer the [drawRRect] method. These
/// examples are using [drawPaint] as a proxy for "complicated draw operations
/// that will get clipped", to illustrate the point.)
///
/// ## Performance considerations
///
/// Generally speaking, [saveLayer] is relatively expensive.
///
/// There are a several different hardware architectures for GPUs (graphics
/// processing units, the hardware that handles graphics), but most of them
/// involve batching commands and reordering them for performance. When layers
/// are used, they cause the rendering pipeline to have to switch render
/// target (from one layer to another). Render target switches can flush the
/// GPU's command buffer, which typically means that optimizations that one
/// could get with larger batching are lost. Render target switches also
/// generate a lot of memory churn because the GPU needs to copy out the
/// current frame buffer contents from the part of memory that's optimized for
/// writing, and then needs to copy it back in once the previous render target
/// (layer) is restored.
///
/// See also:
///
/// * [save], which saves the current state, but does not create a new layer
/// for subsequent commands.
/// * [BlendMode], which discusses the use of [Paint.blendMode] with
/// [saveLayer].
void saveLayer(Rect? bounds, Paint paint);
/// Pops the current save stack, if there is anything to pop.
/// Otherwise, does nothing.
///
/// Use [save] and [saveLayer] to push state onto the stack.
///
/// If the state was pushed with [saveLayer], then this call will also
/// cause the new layer to be composited into the previous layer.
void restore();
/// Restores the save stack to a previous level as might be obtained from [getSaveCount].
/// If [count] is less than 1, the stack is restored to its initial state.
/// If [count] is greater than the current [getSaveCount] then nothing happens.
///
/// Use [save] and [saveLayer] to push state onto the stack.
///
/// If any of the state stack levels restored by this call were pushed with
/// [saveLayer], then this call will also cause those layers to be composited
/// into their previous layers.
void restoreToCount(int count);
/// Returns the number of items on the save stack, including the
/// initial state. This means it returns 1 for a clean canvas, and
/// that each call to [save] and [saveLayer] increments it, and that
/// each matching call to [restore] decrements it.
///
/// This number cannot go below 1.
int getSaveCount();
/// Add a translation to the current transform, shifting the coordinate space
/// horizontally by the first argument and vertically by the second argument.
void translate(double dx, double dy);
/// Add an axis-aligned scale to the current transform, scaling by the first
/// argument in the horizontal direction and the second in the vertical
/// direction.
///
/// If [sy] is unspecified, [sx] will be used for the scale in both
/// directions.
void scale(double sx, [double? sy]);
/// Add a rotation to the current transform. The argument is in radians clockwise.
void rotate(double radians);
/// Add an axis-aligned skew to the current transform, with the first argument
/// being the horizontal skew in rise over run units clockwise around the
/// origin, and the second argument being the vertical skew in rise over run
/// units clockwise around the origin.
void skew(double sx, double sy);
/// Multiply the current transform by the specified 4⨉4 transformation matrix
/// specified as a list of values in column-major order.
void transform(Float64List matrix4);
/// Returns the current transform including the combined result of all transform
/// methods executed since the creation of this [Canvas] object, and respecting the
/// save/restore history.
///
/// Methods that can change the current transform include [translate], [scale],
/// [rotate], [skew], and [transform]. The [restore] method can also modify
/// the current transform by restoring it to the same value it had before its
/// associated [save] or [saveLayer] call.
Float64List getTransform();
/// Reduces the clip region to the intersection of the current clip and the
/// given rectangle.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/clip_rect.png)
///
/// If [doAntiAlias] is true, then the clip will be anti-aliased.
///
/// If multiple draw commands intersect with the clip boundary, this can result
/// in incorrect blending at the clip boundary. See [saveLayer] for a
/// discussion of how to address that.
///
/// Use [ClipOp.difference] to subtract the provided rectangle from the
/// current clip.
void clipRect(Rect rect, { ClipOp clipOp = ClipOp.intersect, bool doAntiAlias = true });
/// Reduces the clip region to the intersection of the current clip and the
/// given rounded rectangle.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/clip_rrect.png)
///
/// If [doAntiAlias] is true, then the clip will be anti-aliased.
///
/// If multiple draw commands intersect with the clip boundary, this can result
/// in incorrect blending at the clip boundary. See [saveLayer] for a
/// discussion of how to address that and some examples of using [clipRRect].
void clipRRect(RRect rrect, {bool doAntiAlias = true});
/// Reduces the clip region to the intersection of the current clip and the
/// given [Path].
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/clip_path.png)
///
/// If [doAntiAlias] is true, then the clip will be anti-aliased.
///
/// If multiple draw commands intersect with the clip boundary, this can result
/// in incorrect blending at the clip boundary. See [saveLayer] for a
/// discussion of how to address that.
void clipPath(Path path, {bool doAntiAlias = true});
/// Returns the conservative bounds of the combined result of all clip methods
/// executed within the current save stack of this [Canvas] object, as measured
/// in the local coordinate space under which rendering operations are currently
/// performed.
///
/// The combined clip results are rounded out to an integer pixel boundary before
/// they are transformed back into the local coordinate space which accounts for
/// the pixel roundoff in rendering operations, particularly when antialiasing.
/// Because the [Picture] may eventually be rendered into a scene within the
/// context of transforming widgets or layers, the result may thus be overly
/// conservative due to premature rounding. Using the [getDestinationClipBounds]
/// method combined with the external transforms and rounding in the true device
/// coordinate system will produce more accurate results, but this value may
/// provide a more convenient approximation to compare rendering operations to
/// the established clip.
///
/// {@template dart.ui.canvas.conservativeClipBounds}
/// The conservative estimate of the bounds is based on intersecting the bounds
/// of each clip method that was executed with [ClipOp.intersect] and potentially
/// ignoring any clip method that was executed with [ClipOp.difference]. The
/// [ClipOp] argument is only present on the [clipRect] method.
///
/// To understand how the bounds estimate can be conservative, consider the
/// following two clip method calls:
///
/// ```dart
/// void draw(Canvas canvas) {
/// canvas.clipPath(Path()
/// ..addRect(const Rect.fromLTRB(10, 10, 20, 20))
/// ..addRect(const Rect.fromLTRB(80, 80, 100, 100)));
/// canvas.clipPath(Path()
/// ..addRect(const Rect.fromLTRB(80, 10, 100, 20))
/// ..addRect(const Rect.fromLTRB(10, 80, 20, 100)));
/// // ...
/// }
/// ```
///
/// After executing both of those calls there is no area left in which to draw
/// because the two paths have no overlapping regions. But, in this case,
/// [getLocalClipBounds] would return a rectangle from `10, 10` to `100, 100` because it
/// only intersects the bounds of the two path objects to obtain its conservative
/// estimate.
///
/// The clip bounds are not affected by the bounds of any enclosing
/// [saveLayer] call as the engine does not currently guarantee the strict
/// enforcement of those bounds during rendering.
///
/// Methods that can change the current clip include [clipRect], [clipRRect],
/// and [clipPath]. The [restore] method can also modify the current clip by
/// restoring it to the same value it had before its associated [save] or
/// [saveLayer] call.
/// {@endtemplate}
Rect getLocalClipBounds();
/// Returns the conservative bounds of the combined result of all clip methods
/// executed within the current save stack of this [Canvas] object, as measured
/// in the destination coordinate space in which the [Picture] will be rendered.
///
/// Unlike [getLocalClipBounds], the bounds are not rounded out to an integer
/// pixel boundary as the Destination coordinate space may not represent pixels
/// if the [Picture] being constructed will be further transformed when it is
/// rendered or added to a scene. In order to determine the true pixels being
/// affected, those external transforms should be applied first before rounding
/// out the result to integer pixel boundaries. Most typically, [Picture] objects
/// are rendered in a scene with a scale transform representing the Device Pixel
/// Ratio.
///
/// {@macro dart.ui.canvas.conservativeClipBounds}
Rect getDestinationClipBounds();
/// Paints the given [Color] onto the canvas, applying the given
/// [BlendMode], with the given color being the source and the background
/// being the destination.
void drawColor(Color color, BlendMode blendMode);
/// Draws a line between the given points using the given paint. The line is
/// stroked, the value of the [Paint.style] is ignored for this call.
///
/// The `p1` and `p2` arguments are interpreted as offsets from the origin.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/canvas_line.png#gh-light-mode-only)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/canvas_line_dark.png#gh-dark-mode-only)
void drawLine(Offset p1, Offset p2, Paint paint);
/// Fills the canvas with the given [Paint].
///
/// To fill the canvas with a solid color and blend mode, consider
/// [drawColor] instead.
void drawPaint(Paint paint);
/// Draws a rectangle with the given [Paint]. Whether the rectangle is filled
/// or stroked (or both) is controlled by [Paint.style].
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/canvas_rect.png#gh-light-mode-only)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/canvas_rect_dark.png#gh-dark-mode-only)
void drawRect(Rect rect, Paint paint);
/// Draws a rounded rectangle with the given [Paint]. Whether the rectangle is
/// filled or stroked (or both) is controlled by [Paint.style].
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/canvas_rrect.png#gh-light-mode-only)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/canvas_rrect_dark.png#gh-dark-mode-only)
void drawRRect(RRect rrect, Paint paint);
/// Draws a shape consisting of the difference between two rounded rectangles
/// with the given [Paint]. Whether this shape is filled or stroked (or both)
/// is controlled by [Paint.style].
///
/// This shape is almost but not quite entirely unlike an annulus.
void drawDRRect(RRect outer, RRect inner, Paint paint);
/// Draws an axis-aligned oval that fills the given axis-aligned rectangle
/// with the given [Paint]. Whether the oval is filled or stroked (or both) is
/// controlled by [Paint.style].
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/canvas_oval.png#gh-light-mode-only)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/canvas_oval_dark.png#gh-dark-mode-only)
void drawOval(Rect rect, Paint paint);
/// Draws a circle centered at the point given by the first argument and
/// that has the radius given by the second argument, with the [Paint] given in
/// the third argument. Whether the circle is filled or stroked (or both) is
/// controlled by [Paint.style].
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/canvas_circle.png#gh-light-mode-only)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/canvas_circle_dark.png#gh-dark-mode-only)
void drawCircle(Offset c, double radius, Paint paint);
/// Draw an arc scaled to fit inside the given rectangle.
///
/// It starts from `startAngle` radians around the oval up to
/// `startAngle` + `sweepAngle` radians around the oval, with zero radians
/// being the point on the right hand side of the oval that crosses the
/// horizontal line that intersects the center of the rectangle and with positive
/// angles going clockwise around the oval. If `useCenter` is true, the arc is
/// closed back to the center, forming a circle sector. Otherwise, the arc is
/// not closed, forming a circle segment.
///
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/canvas_draw_arc.png#gh-light-mode-only)
/// ![](https://flutter.github.io/assets-for-api-docs/assets/dart-ui/canvas_draw_arc_dark.png#gh-dark-mode-only)
///
/// This method is optimized for drawing arcs and should be faster than [Path.arcTo].
void drawArc(Rect rect, double startAngle, double sweepAngle, bool useCenter, Paint paint);
/// Draws the given [Path] with the given [Paint].
///
/// Whether this shape is filled or stroked (or both) is controlled by
/// [Paint.style]. If the path is filled, then sub-paths within it are
/// implicitly closed (see [Path.close]).
void drawPath(Path path, Paint paint);
/// Draws the given [Image] into the canvas with its top-left corner at the
/// given [Offset]. The image is composited into the canvas using the given [Paint].
void drawImage(Image image, Offset offset, Paint paint);
/// Draws the subset of the given image described by the `src` argument into
/// the canvas in the axis-aligned rectangle given by the `dst` argument.
///
/// This might sample from outside the `src` rect by up to half the width of
/// an applied filter.
///
/// Multiple calls to this method with different arguments (from the same
/// image) can be batched into a single call to [drawAtlas] to improve
/// performance.
void drawImageRect(Image image, Rect src, Rect dst, Paint paint);
/// Draws the given [Image] into the canvas using the given [Paint].
///
/// The image is drawn in nine portions described by splitting the image by
/// drawing two horizontal lines and two vertical lines, where the `center`
/// argument describes the rectangle formed by the four points where these
/// four lines intersect each other. (This forms a 3-by-3 grid of regions,
/// the center region being described by the `center` argument.)
///
/// The four regions in the corners are drawn, without scaling, in the four
/// corners of the destination rectangle described by `dst`. The remaining
/// five regions are drawn by stretching them to fit such that they exactly
/// cover the destination rectangle while maintaining their relative
/// positions.
void drawImageNine(Image image, Rect center, Rect dst, Paint paint);
/// Draw the given picture onto the canvas. To create a picture, see
/// [PictureRecorder].
void drawPicture(Picture picture);
/// Draws the text in the given [Paragraph] into this canvas at the given
/// [Offset].
///
/// The [Paragraph] object must have had [Paragraph.layout] called on it
/// first.
///
/// To align the text, set the `textAlign` on the [ParagraphStyle] object
/// passed to the [ParagraphBuilder.new] constructor. For more details see
/// [TextAlign] and the discussion at [ParagraphStyle.new].
///
/// If the text is left aligned or justified, the left margin will be at the
/// position specified by the `offset` argument's [Offset.dx] coordinate.
///
/// If the text is right aligned or justified, the right margin will be at the
/// position described by adding the [ParagraphConstraints.width] given to
/// [Paragraph.layout], to the `offset` argument's [Offset.dx] coordinate.
///
/// If the text is centered, the centering axis will be at the position
/// described by adding half of the [ParagraphConstraints.width] given to
/// [Paragraph.layout], to the `offset` argument's [Offset.dx] coordinate.
void drawParagraph(Paragraph paragraph, Offset offset);
/// Draws a sequence of points according to the given [PointMode].
///
/// The `points` argument is interpreted as offsets from the origin.
///
/// The `paint` is used for each point ([PointMode.points]) or line
/// ([PointMode.lines] or [PointMode.polygon]), ignoring [Paint.style].
///
/// See also:
///
/// * [drawRawPoints], which takes `points` as a [Float32List] rather than a
/// [List<Offset>].
void drawPoints(PointMode pointMode, List<Offset> points, Paint paint);
/// Draws a sequence of points according to the given [PointMode].
///
/// The `points` argument is interpreted as a list of pairs of floating point
/// numbers, where each pair represents an x and y offset from the origin.
///
/// The `paint` is used for each point ([PointMode.points]) or line
/// ([PointMode.lines] or [PointMode.polygon]), ignoring [Paint.style].
///
/// See also:
///
/// * [drawPoints], which takes `points` as a [List<Offset>] rather than a
/// [List<Float32List>].
void drawRawPoints(PointMode pointMode, Float32List points, Paint paint);
/// Draws a set of [Vertices] onto the canvas as one or more triangles.
///
/// The [Paint.color] property specifies the default color to use for the
/// triangles.
///
/// The [Paint.shader] property, if set, overrides the color entirely,
/// replacing it with the colors from the specified [ImageShader], [Gradient],
/// or other shader.
///
/// The `blendMode` parameter is used to control how the colors in the
/// `vertices` are combined with the colors in the `paint`. If there are no
/// colors specified in `vertices` then the `blendMode` has no effect. If
/// there are colors in the `vertices`, then the color taken from the
/// [Paint.shader] or [Paint.color] in the `paint` is blended with the colors
/// specified in the `vertices` using the `blendMode` parameter. For the
/// purposes of this blending, the colors from the `paint` parameter are
/// considered the source, and the colors from the `vertices` are considered
/// the destination. [BlendMode.dst] ignores the `paint` and uses only the
/// colors of the `vertices`; [BlendMode.src] ignores the colors of the
/// `vertices` and uses only the colors in the `paint`.
///
/// All parameters must not be null.
///
/// See also:
/// * [Vertices.new], which creates a set of vertices to draw on the canvas.
/// * [Vertices.raw], which creates the vertices using typed data lists
/// rather than unencoded lists.
/// * [paint], Image shaders can be used to draw images on a triangular mesh.
void drawVertices(Vertices vertices, BlendMode blendMode, Paint paint);
/// Draws many parts of an image - the [atlas] - onto the canvas.
///
/// This method allows for optimization when you want to draw many parts of an
/// image onto the canvas, such as when using sprites or zooming. It is more efficient
/// than using multiple calls to [drawImageRect] and provides more functionality
/// to individually transform each image part by a separate rotation or scale and
/// blend or modulate those parts with a solid color.
///
/// The method takes a list of [Rect] objects that each define a piece of the
/// [atlas] image to be drawn independently. Each [Rect] is associated with an
/// [RSTransform] entry in the [transforms] list which defines the location,
/// rotation, and (uniform) scale with which to draw that portion of the image.
/// Each [Rect] can also be associated with an optional [Color] which will be
/// composed with the associated image part using the [blendMode] before blending
/// the result onto the canvas. The full operation can be broken down as:
///
/// - Blend each rectangular portion of the image specified by an entry in the
/// [rects] argument with its associated entry in the [colors] list using the
/// [blendMode] argument (if a color is specified). In this part of the operation,
/// the image part will be considered the source of the operation and the associated
/// color will be considered the destination.
/// - Blend the result from the first step onto the canvas using the translation,
/// rotation, and scale properties expressed in the associated entry in the
/// [transforms] list using the properties of the [Paint] object.
///
/// If the first stage of the operation which blends each part of the image with
/// a color is needed, then both the [colors] and [blendMode] arguments must
/// not be null and there must be an entry in the [colors] list for each
/// image part. If that stage is not needed, then the [colors] argument can
/// be either null or an empty list and the [blendMode] argument may also be null.
///
/// The optional [cullRect] argument can provide an estimate of the bounds of the
/// coordinates rendered by all components of the atlas to be compared against
/// the clip to quickly reject the operation if it does not intersect.
///
/// An example usage to render many sprites from a single sprite atlas with no
/// rotations or scales:
///
/// ```dart
/// class Sprite {
/// Sprite(this.index, this.center);
/// int index;
/// Offset center;
/// }
///
/// class MyPainter extends CustomPainter {
/// MyPainter(this.spriteAtlas, this.allSprites);
///
/// // assume spriteAtlas contains N 10x10 sprites side by side in a (N*10)x10 image
/// ui.Image spriteAtlas;
/// List<Sprite> allSprites;
///
/// @override
/// void paint(Canvas canvas, Size size) {
/// Paint paint = Paint();
/// canvas.drawAtlas(spriteAtlas, <RSTransform>[
/// for (final Sprite sprite in allSprites)
/// RSTransform.fromComponents(
/// rotation: 0.0,
/// scale: 1.0,
/// // Center of the sprite relative to its rect
/// anchorX: 5.0,
/// anchorY: 5.0,
/// // Location at which to draw the center of the sprite
/// translateX: sprite.center.dx,
/// translateY: sprite.center.dy,
/// ),
/// ], <Rect>[
/// for (final Sprite sprite in allSprites)
/// Rect.fromLTWH(sprite.index * 10.0, 0.0, 10.0, 10.0),
/// ], null, null, null, paint);
/// }
///
/// // ...
/// }
/// ```
///
/// Another example usage which renders sprites with an optional opacity and rotation:
///
/// ```dart
/// class Sprite {
/// Sprite(this.index, this.center, this.alpha, this.rotation);
/// int index;
/// Offset center;
/// int alpha;
/// double rotation;
/// }
///
/// class MyPainter extends CustomPainter {
/// MyPainter(this.spriteAtlas, this.allSprites);
///
/// // assume spriteAtlas contains N 10x10 sprites side by side in a (N*10)x10 image
/// ui.Image spriteAtlas;
/// List<Sprite> allSprites;
///
/// @override
/// void paint(Canvas canvas, Size size) {
/// Paint paint = Paint();
/// canvas.drawAtlas(spriteAtlas, <RSTransform>[
/// for (final Sprite sprite in allSprites)
/// RSTransform.fromComponents(
/// rotation: sprite.rotation,
/// scale: 1.0,
/// // Center of the sprite relative to its rect
/// anchorX: 5.0,
/// anchorY: 5.0,
/// // Location at which to draw the center of the sprite
/// translateX: sprite.center.dx,
/// translateY: sprite.center.dy,
/// ),
/// ], <Rect>[
/// for (final Sprite sprite in allSprites)
/// Rect.fromLTWH(sprite.index * 10.0, 0.0, 10.0, 10.0),
/// ], <Color>[
/// for (final Sprite sprite in allSprites)
/// Colors.white.withAlpha(sprite.alpha),
/// ], BlendMode.srcIn, null, paint);
/// }
///
/// // ...
/// }
/// ```
///
/// The length of the [transforms] and [rects] lists must be equal and
/// if the [colors] argument is not null then it must either be empty or
/// have the same length as the other two lists.
///
/// See also:
///
/// * [drawRawAtlas], which takes its arguments as typed data lists rather
/// than objects.
void drawAtlas(Image atlas,
List<RSTransform> transforms,
List<Rect> rects,
List<Color>? colors,
BlendMode? blendMode,
Rect? cullRect,
Paint paint);
/// Draws many parts of an image - the [atlas] - onto the canvas.
///
/// This method allows for optimization when you want to draw many parts of an
/// image onto the canvas, such as when using sprites or zooming. It is more efficient
/// than using multiple calls to [drawImageRect] and provides more functionality
/// to individually transform each image part by a separate rotation or scale and
/// blend or modulate those parts with a solid color. It is also more efficient
/// than [drawAtlas] as the data in the arguments is already packed in a format
/// that can be directly used by the rendering code.
///
/// A full description of how this method uses its arguments to draw onto the
/// canvas can be found in the description of the [drawAtlas] method.
///
/// The [rstTransforms] argument is interpreted as a list of four-tuples, with
/// each tuple being ([RSTransform.scos], [RSTransform.ssin],
/// [RSTransform.tx], [RSTransform.ty]).
///
/// The [rects] argument is interpreted as a list of four-tuples, with each
/// tuple being ([Rect.left], [Rect.top], [Rect.right], [Rect.bottom]).
///
/// The [colors] argument, which can be null, is interpreted as a list of
/// 32-bit colors, with the same packing as [Color.value]. If the [colors]
/// argument is not null then the [blendMode] argument must also not be null.
///
/// An example usage to render many sprites from a single sprite atlas with no rotations
/// or scales:
///
/// ```dart
/// class Sprite {
/// Sprite(this.index, this.center);
/// int index;
/// Offset center;
/// }
///
/// class MyPainter extends CustomPainter {
/// MyPainter(this.spriteAtlas, this.allSprites);
///
/// // assume spriteAtlas contains N 10x10 sprites side by side in a (N*10)x10 image
/// ui.Image spriteAtlas;
/// List<Sprite> allSprites;
///
/// @override
/// void paint(Canvas canvas, Size size) {
/// // For best advantage, these lists should be cached and only specific
/// // entries updated when the sprite information changes. This code is
/// // illustrative of how to set up the data and not a recommendation for
/// // optimal usage.
/// Float32List rectList = Float32List(allSprites.length * 4);
/// Float32List transformList = Float32List(allSprites.length * 4);
/// for (int i = 0; i < allSprites.length; i++) {
/// Sprite sprite = allSprites[i];
/// final double rectX = sprite.index * 10.0;
/// rectList[i * 4 + 0] = rectX;
/// rectList[i * 4 + 1] = 0.0;
/// rectList[i * 4 + 2] = rectX + 10.0;
/// rectList[i * 4 + 3] = 10.0;
///
/// // This example sets the RSTransform values directly for a common case of no
/// // rotations or scales and just a translation to position the atlas entry. For
/// // more complicated transforms one could use the RSTransform class to compute
/// // the necessary values or do the same math directly.
/// transformList[i * 4 + 0] = 1.0;
/// transformList[i * 4 + 1] = 0.0;
/// transformList[i * 4 + 2] = sprite.center.dx - 5.0;
/// transformList[i * 4 + 3] = sprite.center.dy - 5.0;
/// }
/// Paint paint = Paint();
/// canvas.drawRawAtlas(spriteAtlas, transformList, rectList, null, null, null, paint);
/// }
///
/// // ...
/// }
/// ```
///
/// Another example usage which renders sprites with an optional opacity and rotation:
///
/// ```dart
/// class Sprite {
/// Sprite(this.index, this.center, this.alpha, this.rotation);
/// int index;
/// Offset center;
/// int alpha;
/// double rotation;
/// }
///
/// class MyPainter extends CustomPainter {
/// MyPainter(this.spriteAtlas, this.allSprites);
///
/// // assume spriteAtlas contains N 10x10 sprites side by side in a (N*10)x10 image
/// ui.Image spriteAtlas;
/// List<Sprite> allSprites;
///
/// @override
/// void paint(Canvas canvas, Size size) {
/// // For best advantage, these lists should be cached and only specific
/// // entries updated when the sprite information changes. This code is
/// // illustrative of how to set up the data and not a recommendation for
/// // optimal usage.
/// Float32List rectList = Float32List(allSprites.length * 4);
/// Float32List transformList = Float32List(allSprites.length * 4);
/// Int32List colorList = Int32List(allSprites.length);
/// for (int i = 0; i < allSprites.length; i++) {
/// Sprite sprite = allSprites[i];
/// final double rectX = sprite.index * 10.0;
/// rectList[i * 4 + 0] = rectX;
/// rectList[i * 4 + 1] = 0.0;
/// rectList[i * 4 + 2] = rectX + 10.0;
/// rectList[i * 4 + 3] = 10.0;
///
/// // This example uses an RSTransform object to compute the necessary values for
/// // the transform using a factory helper method because the sprites contain
/// // rotation values which are not trivial to work with. But if the math for the
/// // values falls out from other calculations on the sprites then the values could
/// // possibly be generated directly from the sprite update code.
/// final RSTransform transform = RSTransform.fromComponents(
/// rotation: sprite.rotation,
/// scale: 1.0,
/// // Center of the sprite relative to its rect
/// anchorX: 5.0,
/// anchorY: 5.0,
/// // Location at which to draw the center of the sprite
/// translateX: sprite.center.dx,
/// translateY: sprite.center.dy,
/// );
/// transformList[i * 4 + 0] = transform.scos;
/// transformList[i * 4 + 1] = transform.ssin;
/// transformList[i * 4 + 2] = transform.tx;
/// transformList[i * 4 + 3] = transform.ty;
///
/// // This example computes the color value directly, but one could also compute
/// // an actual Color object and use its Color.value getter for the same result.
/// // Since we are using BlendMode.srcIn, only the alpha component matters for
/// // these colors which makes this a simple shift operation.
/// colorList[i] = sprite.alpha << 24;
/// }
/// Paint paint = Paint();
/// canvas.drawRawAtlas(spriteAtlas, transformList, rectList, colorList, BlendMode.srcIn, null, paint);
/// }
///
/// // ...
/// }
/// ```
///
/// See also:
///
/// * [drawAtlas], which takes its arguments as objects rather than typed
/// data lists.
void drawRawAtlas(Image atlas,
Float32List rstTransforms,
Float32List rects,
Int32List? colors,
BlendMode? blendMode,
Rect? cullRect,
Paint paint);
/// Draws a shadow for a [Path] representing the given material elevation.
///
/// The `transparentOccluder` argument should be true if the occluding object
/// is not opaque.
///
/// The arguments must not be null.
void drawShadow(Path path, Color color, double elevation, bool transparentOccluder);
}
base class _NativeCanvas extends NativeFieldWrapperClass1 implements Canvas {
_NativeCanvas(PictureRecorder recorder, [ Rect? cullRect ]) {
if (recorder.isRecording) {
throw ArgumentError('"recorder" must not already be associated with another Canvas.');
}
_recorder = recorder as _NativePictureRecorder;
_recorder!._canvas = this;
cullRect ??= Rect.largest;
_constructor(_recorder!, cullRect.left, cullRect.top, cullRect.right, cullRect.bottom);
}
@Native<Void Function(Handle, Pointer<Void>, Double, Double, Double, Double)>(symbol: 'Canvas::Create')
external void _constructor(_NativePictureRecorder recorder, double left, double top, double right, double bottom);
// The underlying DlCanvas is owned by the DisplayListBuilder used to create this Canvas.
// The Canvas holds a reference to the PictureRecorder to prevent the recorder from being
// garbage collected until PictureRecorder.endRecording is called.
_NativePictureRecorder? _recorder;
@override
@Native<Void Function(Pointer<Void>)>(symbol: 'Canvas::save', isLeaf: true)
external void save();
@override
void saveLayer(Rect? bounds, Paint paint) {
if (bounds == null) {
_saveLayerWithoutBounds(paint._objects, paint._data);
} else {
assert(_rectIsValid(bounds));
_saveLayer(bounds.left, bounds.top, bounds.right, bounds.bottom, paint._objects, paint._data);
}
}
@Native<Void Function(Pointer<Void>, Handle, Handle)>(symbol: 'Canvas::saveLayerWithoutBounds')
external void _saveLayerWithoutBounds(List<Object?>? paintObjects, ByteData paintData);
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Handle, Handle)>(symbol: 'Canvas::saveLayer')
external void _saveLayer(double left, double top, double right, double bottom, List<Object?>? paintObjects, ByteData paintData);
@override
@Native<Void Function(Pointer<Void>)>(symbol: 'Canvas::restore', isLeaf: true)
external void restore();
@override
@Native<Void Function(Pointer<Void>, Int32)>(symbol: 'Canvas::restoreToCount', isLeaf: true)
external void restoreToCount(int count);
@override
@Native<Int32 Function(Pointer<Void>)>(symbol: 'Canvas::getSaveCount', isLeaf: true)
external int getSaveCount();
@override
@Native<Void Function(Pointer<Void>, Double, Double)>(symbol: 'Canvas::translate', isLeaf: true)
external void translate(double dx, double dy);
@override
void scale(double sx, [double? sy]) => _scale(sx, sy ?? sx);
@Native<Void Function(Pointer<Void>, Double, Double)>(symbol: 'Canvas::scale', isLeaf: true)
external void _scale(double sx, double sy);
@override
@Native<Void Function(Pointer<Void>, Double)>(symbol: 'Canvas::rotate', isLeaf: true)
external void rotate(double radians);
@override
@Native<Void Function(Pointer<Void>, Double, Double)>(symbol: 'Canvas::skew', isLeaf: true)
external void skew(double sx, double sy);
@override
void transform(Float64List matrix4) {
if (matrix4.length != 16) {
throw ArgumentError('"matrix4" must have 16 entries.');
}
_transform(matrix4);
}
@Native<Void Function(Pointer<Void>, Handle)>(symbol: 'Canvas::transform')
external void _transform(Float64List matrix4);
@override
Float64List getTransform() {
final Float64List matrix4 = Float64List(16);
_getTransform(matrix4);
return matrix4;
}
@Native<Void Function(Pointer<Void>, Handle)>(symbol: 'Canvas::getTransform')
external void _getTransform(Float64List matrix4);
@override
void clipRect(Rect rect, { ClipOp clipOp = ClipOp.intersect, bool doAntiAlias = true }) {
assert(_rectIsValid(rect));
_clipRect(rect.left, rect.top, rect.right, rect.bottom, clipOp.index, doAntiAlias);
}
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Int32, Bool)>(symbol: 'Canvas::clipRect', isLeaf: true)
external void _clipRect(double left, double top, double right, double bottom, int clipOp, bool doAntiAlias);
@override
void clipRRect(RRect rrect, {bool doAntiAlias = true}) {
assert(_rrectIsValid(rrect));
_clipRRect(rrect._getValue32(), doAntiAlias);
}
@Native<Void Function(Pointer<Void>, Handle, Bool)>(symbol: 'Canvas::clipRRect')
external void _clipRRect(Float32List rrect, bool doAntiAlias);
@override
void clipPath(Path path, {bool doAntiAlias = true}) {
_clipPath(path as _NativePath, doAntiAlias);
}
@Native<Void Function(Pointer<Void>, Pointer<Void>, Bool)>(symbol: 'Canvas::clipPath')
external void _clipPath(_NativePath path, bool doAntiAlias);
@override
Rect getLocalClipBounds() {
final Float64List bounds = Float64List(4);
_getLocalClipBounds(bounds);
return Rect.fromLTRB(bounds[0], bounds[1], bounds[2], bounds[3]);
}
@Native<Void Function(Pointer<Void>, Handle)>(symbol: 'Canvas::getLocalClipBounds')
external void _getLocalClipBounds(Float64List bounds);
@override
Rect getDestinationClipBounds() {
final Float64List bounds = Float64List(4);
_getDestinationClipBounds(bounds);
return Rect.fromLTRB(bounds[0], bounds[1], bounds[2], bounds[3]);
}
@Native<Void Function(Pointer<Void>, Handle)>(symbol: 'Canvas::getDestinationClipBounds')
external void _getDestinationClipBounds(Float64List bounds);
@override
void drawColor(Color color, BlendMode blendMode) {
_drawColor(color.value, blendMode.index);
}
@Native<Void Function(Pointer<Void>, Uint32, Int32)>(symbol: 'Canvas::drawColor', isLeaf: true)
external void _drawColor(int color, int blendMode);
@override
void drawLine(Offset p1, Offset p2, Paint paint) {
assert(_offsetIsValid(p1));
assert(_offsetIsValid(p2));
_drawLine(p1.dx, p1.dy, p2.dx, p2.dy, paint._objects, paint._data);
}
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Handle, Handle)>(symbol: 'Canvas::drawLine')
external void _drawLine(double x1, double y1, double x2, double y2, List<Object?>? paintObjects, ByteData paintData);
@override
void drawPaint(Paint paint) {
_drawPaint(paint._objects, paint._data);
}
@Native<Void Function(Pointer<Void>, Handle, Handle)>(symbol: 'Canvas::drawPaint')
external void _drawPaint(List<Object?>? paintObjects, ByteData paintData);
@override
void drawRect(Rect rect, Paint paint) {
assert(_rectIsValid(rect));
_drawRect(rect.left, rect.top, rect.right, rect.bottom, paint._objects, paint._data);
}
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Handle, Handle)>(symbol: 'Canvas::drawRect')
external void _drawRect(double left, double top, double right, double bottom, List<Object?>? paintObjects, ByteData paintData);
@override
void drawRRect(RRect rrect, Paint paint) {
assert(_rrectIsValid(rrect));
_drawRRect(rrect._getValue32(), paint._objects, paint._data);
}
@Native<Void Function(Pointer<Void>, Handle, Handle, Handle)>(symbol: 'Canvas::drawRRect')
external void _drawRRect(Float32List rrect, List<Object?>? paintObjects, ByteData paintData);
@override
void drawDRRect(RRect outer, RRect inner, Paint paint) {
assert(_rrectIsValid(outer));
assert(_rrectIsValid(inner));
_drawDRRect(outer._getValue32(), inner._getValue32(), paint._objects, paint._data);
}
@Native<Void Function(Pointer<Void>, Handle, Handle, Handle, Handle)>(symbol: 'Canvas::drawDRRect')
external void _drawDRRect(Float32List outer, Float32List inner, List<Object?>? paintObjects, ByteData paintData);
@override
void drawOval(Rect rect, Paint paint) {
assert(_rectIsValid(rect));
_drawOval(rect.left, rect.top, rect.right, rect.bottom, paint._objects, paint._data);
}
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Handle, Handle)>(symbol: 'Canvas::drawOval')
external void _drawOval(double left, double top, double right, double bottom, List<Object?>? paintObjects, ByteData paintData);
@override
void drawCircle(Offset c, double radius, Paint paint) {
assert(_offsetIsValid(c));
_drawCircle(c.dx, c.dy, radius, paint._objects, paint._data);
}
@Native<Void Function(Pointer<Void>, Double, Double, Double, Handle, Handle)>(symbol: 'Canvas::drawCircle')
external void _drawCircle(double x, double y, double radius, List<Object?>? paintObjects, ByteData paintData);
@override
void drawArc(Rect rect, double startAngle, double sweepAngle, bool useCenter, Paint paint) {
assert(_rectIsValid(rect));
_drawArc(rect.left, rect.top, rect.right, rect.bottom, startAngle, sweepAngle, useCenter, paint._objects, paint._data);
}
@Native<Void Function(Pointer<Void>, Double, Double, Double, Double, Double, Double, Bool, Handle, Handle)>(symbol: 'Canvas::drawArc')
external void _drawArc(
double left,
double top,
double right,
double bottom,
double startAngle,
double sweepAngle,
bool useCenter,
List<Object?>? paintObjects,
ByteData paintData);
@override
void drawPath(Path path, Paint paint) {
_drawPath(path as _NativePath, paint._objects, paint._data);
}
@Native<Void Function(Pointer<Void>, Pointer<Void>, Handle, Handle)>(symbol: 'Canvas::drawPath')
external void _drawPath(_NativePath path, List<Object?>? paintObjects, ByteData paintData);
@override
void drawImage(Image image, Offset offset, Paint paint) {
assert(!image.debugDisposed);
assert(_offsetIsValid(offset));
final String? error = _drawImage(image._image, offset.dx, offset.dy, paint._objects, paint._data, paint.filterQuality.index);
if (error != null) {
throw PictureRasterizationException._(error, stack: image._debugStack);
}
}
@Native<Handle Function(Pointer<Void>, Pointer<Void>, Double, Double, Handle, Handle, Int32)>(symbol: 'Canvas::drawImage')
external String? _drawImage(_Image image, double x, double y, List<Object?>? paintObjects, ByteData paintData, int filterQualityIndex);
@override
void drawImageRect(Image image, Rect src, Rect dst, Paint paint) {
assert(!image.debugDisposed);
assert(_rectIsValid(src));
assert(_rectIsValid(dst));
final String? error = _drawImageRect(image._image,
src.left,
src.top,
src.right,
src.bottom,
dst.left,
dst.top,
dst.right,
dst.bottom,
paint._objects,
paint._data,
paint.filterQuality.index);
if (error != null) {
throw PictureRasterizationException._(error, stack: image._debugStack);
}
}
@Native<Handle Function(Pointer<Void>, Pointer<Void>, Double, Double, Double, Double, Double, Double, Double, Double, Handle, Handle, Int32)>(symbol: 'Canvas::drawImageRect')
external String? _drawImageRect(
_Image image,
double srcLeft,
double srcTop,
double srcRight,
double srcBottom,
double dstLeft,
double dstTop,
double dstRight,
double dstBottom,
List<Object?>? paintObjects,
ByteData paintData,
int filterQualityIndex);
@override
void drawImageNine(Image image, Rect center, Rect dst, Paint paint) {
assert(!image.debugDisposed);
assert(_rectIsValid(center));
assert(_rectIsValid(dst));
final String? error = _drawImageNine(image._image,
center.left,
center.top,
center.right,
center.bottom,
dst.left,
dst.top,
dst.right,
dst.bottom,
paint._objects,
paint._data,
paint.filterQuality.index);
if (error != null) {
throw PictureRasterizationException._(error, stack: image._debugStack);
}
}
@Native<Handle Function(Pointer<Void>, Pointer<Void>, Double, Double, Double, Double, Double, Double, Double, Double, Handle, Handle, Int32)>(symbol: 'Canvas::drawImageNine')
external String? _drawImageNine(
_Image image,
double centerLeft,
double centerTop,
double centerRight,
double centerBottom,
double dstLeft,
double dstTop,
double dstRight,
double dstBottom,
List<Object?>? paintObjects,
ByteData paintData,
int filterQualityIndex);
@override
void drawPicture(Picture picture) {
assert(!picture.debugDisposed);
_drawPicture(picture as _NativePicture);
}
@Native<Void Function(Pointer<Void>, Pointer<Void>)>(symbol: 'Canvas::drawPicture')
external void _drawPicture(_NativePicture picture);
@override
void drawParagraph(Paragraph paragraph, Offset offset) {
final _NativeParagraph nativeParagraph = paragraph as _NativeParagraph;
assert(!nativeParagraph.debugDisposed);
assert(_offsetIsValid(offset));
assert(!nativeParagraph._needsLayout);
nativeParagraph._paint(this, offset.dx, offset.dy);
}
@override
void drawPoints(PointMode pointMode, List<Offset> points, Paint paint) {
_drawPoints(paint._objects, paint._data, pointMode.index, _encodePointList(points));
}
@override
void drawRawPoints(PointMode pointMode, Float32List points, Paint paint) {
if (points.length % 2 != 0) {
throw ArgumentError('"points" must have an even number of values.');
}
_drawPoints(paint._objects, paint._data, pointMode.index, points);
}
@Native<Void Function(Pointer<Void>, Handle, Handle, Int32, Handle)>(symbol: 'Canvas::drawPoints')
external void _drawPoints(List<Object?>? paintObjects, ByteData paintData, int pointMode, Float32List points);
@override
void drawVertices(Vertices vertices, BlendMode blendMode, Paint paint) {
assert(!vertices.debugDisposed);
_drawVertices(vertices, blendMode.index, paint._objects, paint._data);
}
@Native<Void Function(Pointer<Void>, Pointer<Void>, Int32, Handle, Handle)>(symbol: 'Canvas::drawVertices')
external void _drawVertices(Vertices vertices, int blendMode, List<Object?>? paintObjects, ByteData paintData);
@override
void drawAtlas(Image atlas,
List<RSTransform> transforms,
List<Rect> rects,
List<Color>? colors,
BlendMode? blendMode,
Rect? cullRect,
Paint paint) {
assert(!atlas.debugDisposed);
assert(colors == null || colors.isEmpty || blendMode != null);
final int rectCount = rects.length;
if (transforms.length != rectCount) {
throw ArgumentError('"transforms" and "rects" lengths must match.');
}
if (colors != null && colors.isNotEmpty && colors.length != rectCount) {
throw ArgumentError('If non-null, "colors" length must match that of "transforms" and "rects".');
}
final Float32List rstTransformBuffer = Float32List(rectCount * 4);
final Float32List rectBuffer = Float32List(rectCount * 4);
for (int i = 0; i < rectCount; ++i) {
final int index0 = i * 4;
final int index1 = index0 + 1;
final int index2 = index0 + 2;
final int index3 = index0 + 3;
final RSTransform rstTransform = transforms[i];
final Rect rect = rects[i];
assert(_rectIsValid(rect));
rstTransformBuffer[index0] = rstTransform.scos;
rstTransformBuffer[index1] = rstTransform.ssin;
rstTransformBuffer[index2] = rstTransform.tx;
rstTransformBuffer[index3] = rstTransform.ty;
rectBuffer[index0] = rect.left;
rectBuffer[index1] = rect.top;
rectBuffer[index2] = rect.right;
rectBuffer[index3] = rect.bottom;
}
final Int32List? colorBuffer = (colors == null || colors.isEmpty) ? null : _encodeColorList(colors);
final Float32List? cullRectBuffer = cullRect?._getValue32();
final int qualityIndex = paint.filterQuality.index;
final String? error = _drawAtlas(
paint._objects, paint._data, qualityIndex, atlas._image, rstTransformBuffer, rectBuffer,
colorBuffer, (blendMode ?? BlendMode.src).index, cullRectBuffer
);
if (error != null) {
throw PictureRasterizationException._(error, stack: atlas._debugStack);
}
}
@override
void drawRawAtlas(Image atlas,
Float32List rstTransforms,
Float32List rects,
Int32List? colors,
BlendMode? blendMode,
Rect? cullRect,
Paint paint) {
assert(colors == null || blendMode != null);
final int rectCount = rects.length;
if (rstTransforms.length != rectCount) {
throw ArgumentError('"rstTransforms" and "rects" lengths must match.');
}
if (rectCount % 4 != 0) {
throw ArgumentError('"rstTransforms" and "rects" lengths must be a multiple of four.');
}
if (colors != null && colors.length * 4 != rectCount) {
throw ArgumentError('If non-null, "colors" length must be one fourth the length of "rstTransforms" and "rects".');
}
final int qualityIndex = paint.filterQuality.index;
final String? error = _drawAtlas(
paint._objects, paint._data, qualityIndex, atlas._image, rstTransforms, rects,
colors, (blendMode ?? BlendMode.src).index, cullRect?._getValue32()
);
if (error != null) {
throw PictureRasterizationException._(error, stack: atlas._debugStack);
}
}
@Native<Handle Function(Pointer<Void>, Handle, Handle, Int32, Pointer<Void>, Handle, Handle, Handle, Int32, Handle)>(symbol: 'Canvas::drawAtlas')
external String? _drawAtlas(
List<Object?>? paintObjects,
ByteData paintData,
int filterQualityIndex,
_Image atlas,
Float32List rstTransforms,
Float32List rects,
Int32List? colors,
int blendMode,
Float32List? cullRect);
@override
void drawShadow(Path path, Color color, double elevation, bool transparentOccluder) {
_drawShadow(path as _NativePath, color.value, elevation, transparentOccluder);
}
@Native<Void Function(Pointer<Void>, Pointer<Void>, Uint32, Double, Bool)>(symbol: 'Canvas::drawShadow')
external void _drawShadow(_NativePath path, int color, double elevation, bool transparentOccluder);
}
/// Signature for [Picture] lifecycle events.
typedef PictureEventCallback = void Function(Picture picture);
/// An object representing a sequence of recorded graphical operations.
///
/// To create a [Picture], use a [PictureRecorder].
///
/// A [Picture] can be placed in a [Scene] using a [SceneBuilder], via
/// the [SceneBuilder.addPicture] method. A [Picture] can also be
/// drawn into a [Canvas], using the [Canvas.drawPicture] method.
abstract class Picture {
/// A callback that is invoked to report a picture creation.
///
/// It's preferred to use [MemoryAllocations] in flutter/foundation.dart
/// than to use [onCreate] directly because [MemoryAllocations]
/// allows multiple callbacks.
static PictureEventCallback? onCreate;
/// A callback that is invoked to report the picture disposal.
///
/// It's preferred to use [MemoryAllocations] in flutter/foundation.dart
/// than to use [onDispose] directly because [MemoryAllocations]
/// allows multiple callbacks.
static PictureEventCallback? onDispose;
/// Creates an image from this picture.
///
/// The returned image will be `width` pixels wide and `height` pixels high.
/// The picture is rasterized within the 0 (left), 0 (top), `width` (right),
/// `height` (bottom) bounds. Content outside these bounds is clipped.
Future<Image> toImage(int width, int height);
/// Synchronously creates a handle to an image of this picture.
///
/// {@template dart.ui.painting.Picture.toImageSync}
/// The returned image will be `width` pixels wide and `height` pixels high.
/// The picture is rasterized within the 0 (left), 0 (top), `width` (right),
/// `height` (bottom) bounds. Content outside these bounds is clipped.
///
/// The image object is created and returned synchronously, but is rasterized
/// asynchronously. If the rasterization fails, an exception will be thrown
/// when the image is drawn to a [Canvas].
///
/// If a GPU context is available, this image will be created as GPU resident
/// and not copied back to the host. This means the image will be more
/// efficient to draw.
///
/// If no GPU context is available, the image will be rasterized on the CPU.
/// {@endtemplate}
Image toImageSync(int width, int height);
/// Release the resources used by this object. The object is no longer usable
/// after this method is called.
void dispose();
/// Whether this reference to the underlying picture is [dispose]d.
///
/// This only returns a valid value if asserts are enabled, and must not be
/// used otherwise.
bool get debugDisposed;
/// Returns the approximate number of bytes allocated for this object.
///
/// The actual size of this picture may be larger, particularly if it contains
/// references to image or other large objects.
int get approximateBytesUsed;
}
base class _NativePicture extends NativeFieldWrapperClass1 implements Picture {
/// This class is created by the engine, and should not be instantiated
/// or extended directly.
///
/// To create a [Picture], use a [PictureRecorder].
_NativePicture._();
@override
Future<Image> toImage(int width, int height) {
assert(!_disposed);
if (width <= 0 || height <= 0) {
throw Exception('Invalid image dimensions.');
}
return _futurize(
(_Callback<Image?> callback) => _toImage(width, height, (_Image? image) {
if (image == null) {
callback(null);
} else {
callback(Image._(image, image.width, image.height));
}
}),
);
}
@Native<Handle Function(Pointer<Void>, Uint32, Uint32, Handle)>(symbol: 'Picture::toImage')
external String? _toImage(int width, int height, void Function(_Image?) callback);
@override
Image toImageSync(int width, int height) {
assert(!_disposed);
if (width <= 0 || height <= 0) {
throw Exception('Invalid image dimensions.');
}
final _Image image = _Image._();
_toImageSync(width, height, image);
return Image._(image, image.width, image.height);
}
@Native<Void Function(Pointer<Void>, Uint32, Uint32, Handle)>(symbol: 'Picture::toImageSync')
external void _toImageSync(int width, int height, _Image outImage);
@override
void dispose() {
assert(!_disposed);
assert(() {
_disposed = true;
return true;
}());
Picture.onDispose?.call(this);
_dispose();
}
/// This can't be a leaf call because the native function calls Dart API
/// (Dart_SetNativeInstanceField).
@Native<Void Function(Pointer<Void>)>(symbol: 'Picture::dispose')
external void _dispose();
bool _disposed = false;
@override
bool get debugDisposed {
bool? disposed;
assert(() {
disposed = _disposed;
return true;
}());
return disposed ?? (throw StateError('Picture.debugDisposed is only available when asserts are enabled.'));
}
@override
@Native<Uint64 Function(Pointer<Void>)>(symbol: 'Picture::GetAllocationSize', isLeaf: true)
external int get approximateBytesUsed;
}
/// Records a [Picture] containing a sequence of graphical operations.
///
/// To begin recording, construct a [Canvas] to record the commands.
/// To end recording, use the [PictureRecorder.endRecording] method.
abstract class PictureRecorder {
/// Creates a new idle PictureRecorder. To associate it with a
/// [Canvas] and begin recording, pass this [PictureRecorder] to the
/// [Canvas] constructor.
factory PictureRecorder() = _NativePictureRecorder;
/// Whether this object is currently recording commands.
///
/// Specifically, this returns true if a [Canvas] object has been
/// created to record commands and recording has not yet ended via a
/// call to [endRecording], and false if either this
/// [PictureRecorder] has not yet been associated with a [Canvas],
/// or the [endRecording] method has already been called.
bool get isRecording;
/// Finishes recording graphical operations.
///
/// Returns a picture containing the graphical operations that have been
/// recorded thus far. After calling this function, both the picture recorder
/// and the canvas objects are invalid and cannot be used further.
Picture endRecording();
}
base class _NativePictureRecorder extends NativeFieldWrapperClass1 implements PictureRecorder {
_NativePictureRecorder() { _constructor(); }
@Native<Void Function(Handle)>(symbol: 'PictureRecorder::Create')
external void _constructor();
@override
bool get isRecording => _canvas != null;
@override
Picture endRecording() {
if (_canvas == null) {
throw StateError('PictureRecorder did not start recording.');
}
final _NativePicture picture = _NativePicture._();
_endRecording(picture);
_canvas!._recorder = null;
_canvas = null;
// We invoke the handler here, not in the Picture constructor, because we want
// [picture.approximateBytesUsed] to be available for the handler.
Picture.onCreate?.call(picture);
return picture;
}
@Native<Void Function(Pointer<Void>, Handle)>(symbol: 'PictureRecorder::endRecording')
external void _endRecording(_NativePicture outPicture);
_NativeCanvas? _canvas;
}
/// A single shadow.
///
/// Multiple shadows are stacked together in a [TextStyle].
class Shadow {
/// Construct a shadow.
///
/// The default shadow is a black shadow with zero offset and zero blur.
/// Default shadows should be completely covered by the casting element,
/// and not be visible.
///
/// Transparency should be adjusted through the [color] alpha.
///
/// Shadow order matters due to compositing multiple translucent objects not
/// being commutative.
const Shadow({
this.color = const Color(_kColorDefault),
this.offset = Offset.zero,
this.blurRadius = 0.0,
}) : assert(blurRadius >= 0.0, 'Text shadow blur radius should be non-negative.');
static const int _kColorDefault = 0xFF000000;
// Constants for shadow encoding.
static const int _kBytesPerShadow = 16;
static const int _kColorOffset = 0 << 2;
static const int _kXOffset = 1 << 2;
static const int _kYOffset = 2 << 2;
static const int _kBlurOffset = 3 << 2;
/// Color that the shadow will be drawn with.
///
/// The shadows are shapes composited directly over the base canvas, and do not
/// represent optical occlusion.
final Color color;
/// The displacement of the shadow from the casting element.
///
/// Positive x/y offsets will shift the shadow to the right and down, while
/// negative offsets shift the shadow to the left and up. The offsets are
/// relative to the position of the element that is casting it.
final Offset offset;
/// The standard deviation of the Gaussian to convolve with the shadow's shape.
final double blurRadius;
/// Converts a blur radius in pixels to sigmas.
///
/// See the sigma argument to [MaskFilter.blur].
///
// See SkBlurMask::ConvertRadiusToSigma().
// <https://github.com/google/skia/blob/bb5b77db51d2e149ee66db284903572a5aac09be/src/effects/SkBlurMask.cpp#L23>
static double convertRadiusToSigma(double radius) {
return radius > 0 ? radius * 0.57735 + 0.5 : 0;
}
/// The [blurRadius] in sigmas instead of logical pixels.
///
/// See the sigma argument to [MaskFilter.blur].
double get blurSigma => convertRadiusToSigma(blurRadius);
/// Create the [Paint] object that corresponds to this shadow description.
///
/// The [offset] is not represented in the [Paint] object.
/// To honor this as well, the shape should be translated by [offset] before
/// being filled using this [Paint].
///
/// This class does not provide a way to disable shadows to avoid
/// inconsistencies in shadow blur rendering, primarily as a method of
/// reducing test flakiness. [toPaint] should be overridden in subclasses to
/// provide this functionality.
Paint toPaint() {
return Paint()
..color = color
..maskFilter = MaskFilter.blur(BlurStyle.normal, blurSigma);
}
/// Returns a new shadow with its [offset] and [blurRadius] scaled by the given
/// factor.
Shadow scale(double factor) {
return Shadow(
color: color,
offset: offset * factor,
blurRadius: blurRadius * factor,
);
}
/// Linearly interpolate between two shadows.
///
/// If either shadow is null, this function linearly interpolates from
/// a shadow that matches the other shadow in color but has a zero
/// offset and a zero blurRadius.
///
/// {@template dart.ui.shadow.lerp}
/// The `t` argument represents position on the timeline, with 0.0 meaning
/// that the interpolation has not started, returning `a` (or something
/// equivalent to `a`), 1.0 meaning that the interpolation has finished,
/// returning `b` (or something equivalent to `b`), and values in between
/// meaning that the interpolation is at the relevant point on the timeline
/// between `a` and `b`. The interpolation can be extrapolated beyond 0.0 and
/// 1.0, so negative values and values greater than 1.0 are valid (and can
/// easily be generated by curves such as [Curves.elasticInOut]).
///
/// Values for `t` are usually obtained from an [Animation<double>], such as
/// an [AnimationController].
/// {@endtemplate}
static Shadow? lerp(Shadow? a, Shadow? b, double t) {
if (b == null) {
if (a == null) {
return null;
} else {
return a.scale(1.0 - t);
}
} else {
if (a == null) {
return b.scale(t);
} else {
return Shadow(
color: Color.lerp(a.color, b.color, t)!,
offset: Offset.lerp(a.offset, b.offset, t)!,
blurRadius: _lerpDouble(a.blurRadius, b.blurRadius, t),
);
}
}
}
/// Linearly interpolate between two lists of shadows.
///
/// If the lists differ in length, excess items are lerped with null.
///
/// {@macro dart.ui.shadow.lerp}
static List<Shadow>? lerpList(List<Shadow>? a, List<Shadow>? b, double t) {
if (a == null && b == null) {
return null;
}
a ??= <Shadow>[];
b ??= <Shadow>[];
final List<Shadow> result = <Shadow>[];
final int commonLength = math.min(a.length, b.length);
for (int i = 0; i < commonLength; i += 1) {
result.add(Shadow.lerp(a[i], b[i], t)!);
}
for (int i = commonLength; i < a.length; i += 1) {
result.add(a[i].scale(1.0 - t));
}
for (int i = commonLength; i < b.length; i += 1) {
result.add(b[i].scale(t));
}
return result;
}
@override
bool operator ==(Object other) {
if (identical(this, other)) {
return true;
}
return other is Shadow
&& other.color == color
&& other.offset == offset
&& other.blurRadius == blurRadius;
}
@override
int get hashCode => Object.hash(color, offset, blurRadius);
// Serialize [shadows] into ByteData. The format is a single uint_32_t at
// the beginning indicating the number of shadows, followed by _kBytesPerShadow
// bytes for each shadow.
static ByteData _encodeShadows(List<Shadow>? shadows) {
if (shadows == null) {
return ByteData(0);
}
final int byteCount = shadows.length * _kBytesPerShadow;
final ByteData shadowsData = ByteData(byteCount);
int shadowOffset = 0;
for (int shadowIndex = 0; shadowIndex < shadows.length; ++shadowIndex) {
final Shadow shadow = shadows[shadowIndex];
shadowOffset = shadowIndex * _kBytesPerShadow;
shadowsData.setInt32(_kColorOffset + shadowOffset,
shadow.color.value ^ Shadow._kColorDefault, _kFakeHostEndian);
shadowsData.setFloat32(_kXOffset + shadowOffset,
shadow.offset.dx, _kFakeHostEndian);
shadowsData.setFloat32(_kYOffset + shadowOffset,
shadow.offset.dy, _kFakeHostEndian);
final double blurSigma = Shadow.convertRadiusToSigma(shadow.blurRadius);
shadowsData.setFloat32(_kBlurOffset + shadowOffset,
blurSigma, _kFakeHostEndian);
}
return shadowsData;
}
@override
String toString() => 'TextShadow($color, $offset, $blurRadius)';
}
/// A handle to a read-only byte buffer that is managed by the engine.
///
/// The creator of this object is responsible for calling [dispose] when it is
/// no longer needed.
base class ImmutableBuffer extends NativeFieldWrapperClass1 {
ImmutableBuffer._(this._length);
/// Creates a copy of the data from a [Uint8List] suitable for internal use
/// in the engine.
static Future<ImmutableBuffer> fromUint8List(Uint8List list) {
final ImmutableBuffer instance = ImmutableBuffer._(list.length);
return _futurize((_Callback<void> callback) {
return instance._init(list, callback);
}).then((_) => instance);
}
/// Create a buffer from the asset with key [assetKey].
///
/// Throws an [Exception] if the asset does not exist.
static Future<ImmutableBuffer> fromAsset(String assetKey) {
// The flutter tool converts all asset keys with spaces into URI
// encoded paths (replacing ' ' with '%20', for example). We perform
// the same encoding here so that users can load assets with the same
// key they have written in the pubspec.
final String encodedKey = Uri(path: Uri.encodeFull(assetKey)).path;
final ImmutableBuffer instance = ImmutableBuffer._(0);
return _futurize((_Callback<int> callback) {
return instance._initFromAsset(encodedKey, callback);
}).then((int length) {
if (length == -1) {
throw Exception('Asset not found');
}
return instance.._length = length;
});
}
/// Create a buffer from the file with [path].
///
/// Throws an [Exception] if the asset does not exist.
static Future<ImmutableBuffer> fromFilePath(String path) {
final ImmutableBuffer instance = ImmutableBuffer._(0);
return _futurize((_Callback<int> callback) {
return instance._initFromFile(path, callback);
}).then((int length) {
if (length == -1) {
throw Exception('Could not load file at $path.');
}
return instance.._length = length;
});
}
@Native<Handle Function(Handle, Handle, Handle)>(symbol: 'ImmutableBuffer::init')
external String? _init(Uint8List list, _Callback<void> callback);
@Native<Handle Function(Handle, Handle, Handle)>(symbol: 'ImmutableBuffer::initFromAsset')
external String? _initFromAsset(String assetKey, _Callback<int> callback);
@Native<Handle Function(Handle, Handle, Handle)>(symbol: 'ImmutableBuffer::initFromFile')
external String? _initFromFile(String assetKey, _Callback<int> callback);
/// The length, in bytes, of the underlying data.
int get length => _length;
int _length;
bool _debugDisposed = false;
/// Whether [dispose] has been called.
///
/// This must only be used when asserts are enabled. Otherwise, it will throw.
bool get debugDisposed {
late bool disposed;
assert(() {
disposed = _debugDisposed;
return true;
}());
return disposed;
}
/// Release the resources used by this object. The object is no longer usable
/// after this method is called.
///
/// The underlying memory allocated by this object will be retained beyond
/// this call if it is still needed by another object that has not been
/// disposed. For example, an [ImageDescriptor] that has not been disposed
/// may still retain a reference to the memory from this buffer even if it
/// has been disposed. Freeing that memory requires disposing all resources
/// that may still hold it.
void dispose() {
assert(() {
assert(!_debugDisposed);
_debugDisposed = true;
return true;
}());
_dispose();
}
/// This can't be a leaf call because the native function calls Dart API
/// (Dart_SetNativeInstanceField).
@Native<Void Function(Pointer<Void>)>(symbol: 'ImmutableBuffer::dispose')
external void _dispose();
}
/// A descriptor of data that can be turned into an [Image] via a [Codec].
///
/// Use this class to determine the height, width, and byte size of image data
/// before decoding it.
abstract class ImageDescriptor {
/// Creates an image descriptor from raw image pixels.
///
/// The `pixels` parameter is the pixel data. They are packed in bytes in the
/// order described by `pixelFormat`, then grouped in rows, from left to right,
/// then top to bottom.
///
/// The `rowBytes` parameter is the number of bytes consumed by each row of
/// pixels in the data buffer. If unspecified, it defaults to `width` multiplied
/// by the number of bytes per pixel in the provided `format`.
// Not async because there's no expensive work to do here.
factory ImageDescriptor.raw(
ImmutableBuffer buffer, {
required int width,
required int height,
int? rowBytes,
required PixelFormat pixelFormat,
}) = _NativeImageDescriptor.raw;
/// Creates an image descriptor from encoded data in a supported format.
static Future<ImageDescriptor> encoded(ImmutableBuffer buffer) {
final _NativeImageDescriptor descriptor = _NativeImageDescriptor._();
return _futurize((_Callback<void> callback) {
return descriptor._initEncoded(buffer, callback);
}).then((_) => descriptor);
}
/// The width, in pixels, of the image.
///
/// On the Web, this is only supported for [raw] images.
int get width;
/// The height, in pixels, of the image.
///
/// On the Web, this is only supported for [raw] images.
int get height;
/// The number of bytes per pixel in the image.
///
/// On web, this is only supported for [raw] images.
int get bytesPerPixel;
/// Release the resources used by this object. The object is no longer usable
/// after this method is called.
///
/// This can't be a leaf call because the native function calls Dart API
/// (Dart_SetNativeInstanceField).
void dispose();
/// Creates a [Codec] object which is suitable for decoding the data in the
/// buffer to an [Image].
///
/// If only one of targetWidth or targetHeight are specified, the other
/// dimension will be scaled according to the aspect ratio of the supplied
/// dimension.
///
/// If either targetWidth or targetHeight is less than or equal to zero, it
/// will be treated as if it is null.
Future<Codec> instantiateCodec({int? targetWidth, int? targetHeight});
}
base class _NativeImageDescriptor extends NativeFieldWrapperClass1 implements ImageDescriptor {
_NativeImageDescriptor._();
/// Creates an image descriptor from raw image pixels.
///
/// The `pixels` parameter is the pixel data. They are packed in bytes in the
/// order described by `pixelFormat`, then grouped in rows, from left to right,
/// then top to bottom.
///
/// The `rowBytes` parameter is the number of bytes consumed by each row of
/// pixels in the data buffer. If unspecified, it defaults to `width` multiplied
/// by the number of bytes per pixel in the provided `format`.
// Not async because there's no expensive work to do here.
_NativeImageDescriptor.raw(
ImmutableBuffer buffer, {
required int width,
required int height,
int? rowBytes,
required PixelFormat pixelFormat,
}) {
_width = width;
_height = height;
// We only support 4 byte pixel formats in the PixelFormat enum.
_bytesPerPixel = 4;
_initRaw(this, buffer, width, height, rowBytes ?? -1, pixelFormat.index);
}
@Native<Handle Function(Handle, Pointer<Void>, Handle)>(symbol: 'ImageDescriptor::initEncoded')
external String? _initEncoded(ImmutableBuffer buffer, _Callback<void> callback);
@Native<Void Function(Handle, Handle, Int32, Int32, Int32, Int32)>(symbol: 'ImageDescriptor::initRaw')
external static void _initRaw(ImageDescriptor outDescriptor, ImmutableBuffer buffer, int width, int height, int rowBytes, int pixelFormat);
int? _width;
@Native<Int32 Function(Pointer<Void>)>(symbol: 'ImageDescriptor::width', isLeaf: true)
external int _getWidth();
@override
int get width => _width ??= _getWidth();
int? _height;
@Native<Int32 Function(Pointer<Void>)>(symbol: 'ImageDescriptor::height', isLeaf: true)
external int _getHeight();
@override
int get height => _height ??= _getHeight();
int? _bytesPerPixel;
@Native<Int32 Function(Pointer<Void>)>(symbol: 'ImageDescriptor::bytesPerPixel', isLeaf: true)
external int _getBytesPerPixel();
@override
int get bytesPerPixel => _bytesPerPixel ??= _getBytesPerPixel();
@override
@Native<Void Function(Pointer<Void>)>(symbol: 'ImageDescriptor::dispose')
external void dispose();
@override
Future<Codec> instantiateCodec({int? targetWidth, int? targetHeight}) async {
if (targetWidth != null && targetWidth <= 0) {
targetWidth = null;
}
if (targetHeight != null && targetHeight <= 0) {
targetHeight = null;
}
if (targetWidth == null && targetHeight == null) {
targetWidth = width;
targetHeight = height;
} else if (targetWidth == null && targetHeight != null) {
targetWidth = (targetHeight * (width / height)).round();
targetHeight = targetHeight;
} else if (targetHeight == null && targetWidth != null) {
targetWidth = targetWidth;
targetHeight = targetWidth ~/ (width / height);
}
assert(targetWidth != null);
assert(targetHeight != null);
final Codec codec = _NativeCodec._();
_instantiateCodec(codec, targetWidth!, targetHeight!);
return codec;
}
@Native<Void Function(Pointer<Void>, Handle, Int32, Int32)>(symbol: 'ImageDescriptor::instantiateCodec')
external void _instantiateCodec(Codec outCodec, int targetWidth, int targetHeight);
}
/// Generic callback signature, used by [_futurize].
typedef _Callback<T> = void Function(T result);
/// Signature for a method that receives a [_Callback].
///
/// Return value should be null on success, and a string error message on
/// failure.
typedef _Callbacker<T> = String? Function(_Callback<T?> callback);
// Converts a method that receives a value-returning callback to a method that
// returns a Future.
//
// Return a [String] to cause an [Exception] to be synchronously thrown with
// that string as a message.
//
// If the callback is called with null, the future completes with an error.
//
// Example usage:
//
// ```dart
// typedef IntCallback = void Function(int result);
//
// String? _doSomethingAndCallback(IntCallback callback) {
// Timer(const Duration(seconds: 1), () { callback(1); });
// }
//
// Future<int> doSomething() {
// return _futurize(_doSomethingAndCallback);
// }
// ```
//
// This function is private and so not directly tested. Instead, an exact copy of it
// has been inlined into the test at lib/ui/fixtures/ui_test.dart. if you change this
// function, then you must update the test.
//
// TODO(ianh): We should either automate the code duplication or just make it public.
Future<T> _futurize<T>(_Callbacker<T> callbacker) {
final Completer<T> completer = Completer<T>.sync();
// If the callback synchronously throws an error, then synchronously
// rethrow that error instead of adding it to the completer. This
// prevents the Zone from receiving an uncaught exception.
bool isSync = true;
final String? error = callbacker((T? t) {
if (t == null) {
if (isSync) {
throw Exception('operation failed');
} else {
completer.completeError(Exception('operation failed'));
}
} else {
completer.complete(t);
}
});
isSync = false;
if (error != null) {
throw Exception(error);
}
return completer.future;
}
/// An exception thrown by [Canvas.drawImage] and related methods when drawing
/// an [Image] created via [Picture.toImageSync] that is in an invalid state.
///
/// This exception may be thrown if the requested image dimensions exceeded the
/// maximum 2D texture size allowed by the GPU, or if no GPU surface or context
/// was available for rasterization at request time.
class PictureRasterizationException implements Exception {
const PictureRasterizationException._(this.message, {this.stack});
/// A string containing details about the failure.
final String message;
/// If available, the stack trace at the time [Picture.toImageSync] was called.
final StackTrace? stack;
@override
String toString() {
final StringBuffer buffer = StringBuffer('Failed to rasterize a picture: $message.');
if (stack != null) {
buffer.writeln();
buffer.writeln('The callstack when the image was created was:');
buffer.writeln(stack!.toString());
}
return buffer.toString();
}
}