| // Copyright 2013 The Flutter Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| // A fuchsia-specific shell test. |
| // |
| // This test is only supposed to be ran on Fuchsia OS, as it exercises |
| // Fuchsia-specific functionality for which no equivalent exists elsewhere. |
| |
| #define FML_USED_ON_EMBEDDER |
| |
| #include <time.h> |
| #include <unistd.h> |
| |
| #include <memory> |
| |
| #include <fuchsia/intl/cpp/fidl.h> |
| #include <fuchsia/settings/cpp/fidl.h> |
| #include <lib/sys/cpp/component_context.h> |
| |
| #include "flutter/fml/dart/dart_converter.h" |
| #include "flutter/fml/logging.h" |
| #include "flutter/fml/synchronization/count_down_latch.h" |
| #include "flutter/runtime/dart_vm.h" |
| #include "flutter/shell/common/shell_test.h" |
| |
| namespace flutter { |
| namespace testing { |
| |
| using fuchsia::intl::TimeZoneId; |
| using fuchsia::settings::Intl_Set_Result; |
| using fuchsia::settings::IntlSettings; |
| |
| class FuchsiaShellTest : public ShellTest { |
| protected: |
| FuchsiaShellTest() |
| : ctx_(sys::ComponentContext::CreateAndServeOutgoingDirectory()), |
| intl_() { |
| ctx_->svc()->Connect(intl_.NewRequest()); |
| } |
| |
| ~FuchsiaShellTest() { |
| // Restore the time zone that matches that of the test harness. This is |
| // the default. |
| // TODO(https://fxbug.dev/110019): This crashes right now. |
| |
| // const std::string local_timezone = GetLocalTimezone(); |
| // SetTimezone(local_timezone); |
| // AssertTimezone(local_timezone, GetSettings()); |
| } |
| |
| // Gets the international settings from this Fuchsia realm. |
| IntlSettings GetSettings() { |
| IntlSettings settings; |
| zx_status_t status = intl_->Watch(&settings); |
| EXPECT_EQ(status, ZX_OK); |
| return settings; |
| } |
| |
| // Sets the timezone of this Fuchsia realm to `timezone_name`. |
| void SetTimezone(const std::string& timezone_name) { |
| fuchsia::settings::IntlSettings settings; |
| settings.set_time_zone_id(TimeZoneId{.id = timezone_name}); |
| Intl_Set_Result result; |
| zx_status_t status = intl_->Set(std::move(settings), &result); |
| ASSERT_EQ(status, ZX_OK); |
| } |
| |
| std::string GetLocalTimezone() { |
| const time_t timestamp = time(nullptr); |
| const struct tm* local_time = localtime(×tamp); |
| EXPECT_NE(local_time, nullptr) |
| << "Could not get local time: errno=" << errno << ": " |
| << strerror(errno); |
| return std::string(local_time->tm_zone); |
| } |
| |
| std::string GetLocalTime() { |
| const time_t timestamp = time(nullptr); |
| const struct tm* local_time = localtime(×tamp); |
| EXPECT_NE(local_time, nullptr) |
| << "Could not get local time: errno=" << errno << ": " |
| << strerror(errno); |
| char buffer[sizeof("2020-08-26 14")]; |
| const size_t written = |
| strftime(buffer, sizeof(buffer), "%Y-%m-%d %H", local_time); |
| EXPECT_LT(0UL, written); |
| return std::string(buffer); |
| } |
| |
| // Checks that the timezone name in the `settings` matches what is `expected`. |
| void AssertTimezone(const std::string& expected, |
| const IntlSettings& settings) { |
| ASSERT_EQ(expected, settings.time_zone_id().id); |
| } |
| |
| std::unique_ptr<sys::ComponentContext> ctx_; |
| fuchsia::settings::IntlSyncPtr intl_; |
| |
| fuchsia::settings::IntlSettings save_settings_; |
| }; |
| |
| static bool ValidateShell(Shell* shell) { |
| if (!shell) { |
| return false; |
| } |
| |
| if (!shell->IsSetup()) { |
| return false; |
| } |
| |
| ShellTest::PlatformViewNotifyCreated(shell); |
| |
| { |
| fml::AutoResetWaitableEvent latch; |
| fml::TaskRunner::RunNowOrPostTask( |
| shell->GetTaskRunners().GetPlatformTaskRunner(), [shell, &latch]() { |
| shell->GetPlatformView()->NotifyDestroyed(); |
| latch.Signal(); |
| }); |
| latch.Wait(); |
| } |
| |
| return true; |
| } |
| |
| // Runs the function `f` in lock-step with a Dart isolate until the function |
| // returns `true`, or until a certain fixed number of retries is exhausted. |
| // Events `tick` and `tock` are used to synchronize the lock-stepping. The |
| // event 'tick' is a signal to the dart isolate to advance a single iteration |
| // step. 'tock' is used by the dart isolate to signal that it has completed |
| // its step. |
| static void RunCoroutineWithRetry(int retries, |
| fml::AutoResetWaitableEvent* tick, |
| fml::AutoResetWaitableEvent* tock, |
| std::function<bool()> f) { |
| for (; retries > 0; retries--) { |
| // Do a single coroutine step. |
| tick->Signal(); |
| tock->Wait(); |
| if (f()) { |
| break; |
| } |
| FML_LOG(INFO) << "Retries left: " << retries; |
| sleep(1); |
| } |
| } |
| |
| // Verifies that changing the Fuchsia settings timezone through the FIDL |
| // settings interface results in a change of the reported local time in the |
| // isolate. |
| // |
| // The test is as follows: |
| // |
| // - Set an initial timezone, then get a timestamp from the isolate rounded down |
| // to the nearest hour. The assumption is as long as this test doesn't run |
| // very near the whole hour, which should be very unlikely, the nearest hour |
| // will vary depending on the time zone. |
| // - Set a different timezone. Get a timestamp from the isolate again and |
| // confirm that this time around the timestamps are different. |
| // - Set the initial timezone again, and get the timestamp. This time, the |
| // timestamp rounded down to whole hour should match the timestamp we got |
| // in the initial step. |
| TEST_F(FuchsiaShellTest, LocaltimesVaryOnTimezoneChanges) { |
| #if defined(OS_FUCHSIA) |
| GTEST_SKIP() |
| << "This test fails after the CF V2 migration. https://fxbug.dev/110019 "; |
| #endif // OS_FUCHSIA |
| |
| // See fixtures/shell_test.dart, the callback NotifyLocalTime is declared |
| // there. |
| fml::AutoResetWaitableEvent latch; |
| std::string dart_isolate_time_str; |
| AddNativeCallback("NotifyLocalTime", CREATE_NATIVE_ENTRY([&](auto args) { |
| dart_isolate_time_str = |
| tonic::DartConverter<std::string>::FromDart( |
| Dart_GetNativeArgument(args, 0)); |
| latch.Signal(); |
| })); |
| |
| // As long as this is set, the isolate will keep rerunning its only task. |
| bool continue_fixture = true; |
| fml::AutoResetWaitableEvent fixture_latch; |
| AddNativeCallback("WaitFixture", CREATE_NATIVE_ENTRY([&](auto args) { |
| // Wait for the test fixture to advance. |
| fixture_latch.Wait(); |
| tonic::DartConverter<bool>::SetReturnValue( |
| args, continue_fixture); |
| })); |
| |
| auto settings = CreateSettingsForFixture(); |
| auto configuration = RunConfiguration::InferFromSettings(settings); |
| configuration.SetEntrypoint("timezonesChange"); |
| |
| std::unique_ptr<Shell> shell = CreateShell(settings); |
| ASSERT_NE(shell.get(), nullptr); |
| ASSERT_TRUE(ValidateShell(shell.get())); |
| RunEngine(shell.get(), std::move(configuration)); |
| latch.Wait(); // After this point, the fixture is at waitFixture(). |
| |
| // Start with the local timezone, ensure that the isolate and the test |
| // fixture are the same. |
| SetTimezone(GetLocalTimezone()); |
| AssertTimezone(GetLocalTimezone(), GetSettings()); |
| std::string expected = GetLocalTime(); |
| std::string actual = "undefined"; |
| RunCoroutineWithRetry(10, &fixture_latch, &latch, [&]() { |
| actual = dart_isolate_time_str; |
| FML_LOG(INFO) << "reference: " << expected << ", actual: " << actual; |
| return expected == actual; |
| }); |
| ASSERT_EQ(expected, actual) |
| << "The Dart isolate was expected to show the same time as the test " |
| << "fixture eventually, but that didn't happen after multiple retries."; |
| |
| // Set a new timezone, which is hopefully different from the local one. |
| SetTimezone("America/New_York"); |
| AssertTimezone("America/New_York", GetSettings()); |
| RunCoroutineWithRetry(10, &fixture_latch, &latch, [&]() { |
| actual = dart_isolate_time_str; |
| FML_LOG(INFO) << "reference: " << expected << ", actual: " << actual; |
| return expected != actual; |
| }); |
| ASSERT_NE(expected, actual) |
| << "The Dart isolate was expected to show a time different from the test " |
| << "fixture eventually, but that didn't happen after multiple retries."; |
| |
| // Set a new isolate timezone, and check that the reported time is eventually |
| // different from what it used to be prior to the change. |
| SetTimezone("Europe/Amsterdam"); |
| AssertTimezone("Europe/Amsterdam", GetSettings()); |
| RunCoroutineWithRetry(10, &fixture_latch, &latch, [&]() { |
| actual = dart_isolate_time_str; |
| FML_LOG(INFO) << "reference: " << expected << ", actual: " << actual; |
| return expected != actual; |
| }); |
| ASSERT_NE(expected, actual) |
| << "The Dart isolate was expected to show a time different from the " |
| << "prior timezone eventually, but that didn't happen after multiple " |
| << "retries."; |
| |
| // Let's try to bring the timezone back to the old one. |
| expected = actual; |
| SetTimezone("America/New_York"); |
| AssertTimezone("America/New_York", GetSettings()); |
| RunCoroutineWithRetry(10, &fixture_latch, &latch, [&]() { |
| actual = dart_isolate_time_str; |
| FML_LOG(INFO) << "reference: " << expected << ", actual: " << actual; |
| return expected != actual; |
| }); |
| ASSERT_NE(expected, actual) |
| << "The Dart isolate was expected to show a time different from the " |
| << "prior timezone eventually, but that didn't happen after multiple " |
| << "retries."; |
| |
| // Tell the isolate to exit its loop. |
| ASSERT_FALSE(fixture_latch.IsSignaledForTest()); |
| continue_fixture = false; |
| fixture_latch.Signal(); |
| DestroyShell(std::move(shell)); |
| } |
| |
| } // namespace testing |
| } // namespace flutter |