| #!/usr/bin/env bash |
| # Copyright 2014 The Flutter Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| |
| # ---------------------------------- NOTE ---------------------------------- # |
| # |
| # Please keep the logic in this file consistent with the logic in the |
| # `shared.bat` script in the same directory to ensure that Flutter & Dart continue |
| # to work across all platforms! |
| # |
| # -------------------------------------------------------------------------- # |
| |
| set -e |
| |
| # Needed because if it is set, cd may print the path it changed to. |
| unset CDPATH |
| |
| function pub_upgrade_with_retry { |
| local total_tries="10" |
| local remaining_tries=$((total_tries - 1)) |
| while [[ "$remaining_tries" -gt 0 ]]; do |
| (cd "$FLUTTER_TOOLS_DIR" && "$DART" __deprecated_pub upgrade "$VERBOSITY" --no-precompile) && break |
| >&2 echo "Error: Unable to 'pub upgrade' flutter tool. Retrying in five seconds... ($remaining_tries tries left)" |
| remaining_tries=$((remaining_tries - 1)) |
| sleep 5 |
| done |
| |
| if [[ "$remaining_tries" == 0 ]]; then |
| >&2 echo "Command 'pub upgrade' still failed after $total_tries tries, giving up." |
| return 1 |
| fi |
| return 0 |
| } |
| |
| # Trap function for removing any remaining lock file at exit. |
| function _rmlock () { |
| [ -n "$FLUTTER_UPGRADE_LOCK" ] && rm -rf "$FLUTTER_UPGRADE_LOCK" |
| } |
| |
| # Determines which lock method to use, based on what is available on the system. |
| # Returns a non-zero value if the lock was not acquired, zero if acquired. |
| function _lock () { |
| if hash flock 2>/dev/null; then |
| flock --nonblock --exclusive 7 2>/dev/null |
| elif hash shlock 2>/dev/null; then |
| shlock -f "$1" -p $$ |
| else |
| mkdir "$1" 2>/dev/null |
| fi |
| } |
| |
| # Waits for an update lock to be acquired. |
| # |
| # To ensure that we don't simultaneously update Dart in multiple parallel |
| # instances, we try to obtain an exclusive lock on this file descriptor (and |
| # thus this script's source file) while we are updating Dart and compiling the |
| # script. To do this, we try to use the command line program "flock", which is |
| # available on many Unix-like platforms, in particular on most Linux |
| # distributions. You give it a file descriptor, and it locks the corresponding |
| # file, having inherited the file descriptor from the shell. |
| # |
| # Complicating matters, there are two major scenarios where this will not |
| # work. |
| # |
| # The first is if the platform doesn't have "flock", for example on macOS. There |
| # is not a direct equivalent, so on platforms that don't have flock, we fall |
| # back to using trying to use the shlock command, and if that doesn't exist, |
| # then we use mkdir as an atomic operation to create a lock directory. If mkdir |
| # is able to create the directory, then the lock is acquired. To determine if we |
| # have "flock" or "shlock" available, we use the "hash" shell built-in. |
| # |
| # The second complication is on network file shares. On NFS, to obtain an |
| # exclusive lock you need a file descriptor that is open for writing. Thus, we |
| # ignore errors from flock by redirecting all output to /dev/null, since users |
| # will typically not care about errors from flock and are more likely to be |
| # confused by them than helped. The "shlock" method doesn't work for network |
| # shares, since it is PID-based. The "mkdir" method does work over NFS |
| # implementations that support atomic directory creation (which is most of |
| # them). The "schlock" and "flock" commands are more reliable than the mkdir |
| # method, however, or we would use mkdir in all cases. |
| # |
| # The upgrade_flutter function calling _wait_for_lock is executed in a subshell |
| # with a redirect that pipes the source of this script into file descriptor 7. |
| # A flock lock is released when this subshell exits and file descriptor 7 is |
| # closed. The mkdir lock is released via an exit trap from the subshell that |
| # deletes the lock directory. |
| function _wait_for_lock () { |
| FLUTTER_UPGRADE_LOCK="$FLUTTER_ROOT/bin/cache/.upgrade_lock" |
| local waiting_message_displayed |
| while ! _lock "$FLUTTER_UPGRADE_LOCK"; do |
| if [[ -z $waiting_message_displayed ]]; then |
| # Print with a return so that if the Dart code also prints this message |
| # when it does its own lock, the message won't appear twice. Be sure that |
| # the clearing printf below has the same number of space characters. |
| printf "Waiting for another flutter command to release the startup lock...\r" >&2; |
| waiting_message_displayed="true" |
| fi |
| sleep .1; |
| done |
| if [[ $waiting_message_displayed == "true" ]]; then |
| # Clear the waiting message so it doesn't overlap any following text. |
| printf " \r" >&2; |
| fi |
| unset waiting_message_displayed |
| # If the lock file is acquired, make sure that it is removed on exit. |
| trap _rmlock INT TERM EXIT |
| } |
| |
| # This function is always run in a subshell. Running the function in a subshell |
| # is required to make sure any lock directory is cleaned up by the exit trap in |
| # _wait_for_lock. |
| function upgrade_flutter () ( |
| mkdir -p "$FLUTTER_ROOT/bin/cache" |
| |
| local revision="$(cd "$FLUTTER_ROOT"; git rev-parse HEAD)" |
| local compilekey="$revision:$FLUTTER_TOOL_ARGS" |
| |
| # Invalidate cache if: |
| # * SNAPSHOT_PATH is not a file, or |
| # * STAMP_PATH is not a file, or |
| # * STAMP_PATH is an empty file, or |
| # * Contents of STAMP_PATH is not what we are going to compile, or |
| # * pubspec.yaml last modified after pubspec.lock |
| if [[ ! -f "$SNAPSHOT_PATH" || ! -s "$STAMP_PATH" || "$(cat "$STAMP_PATH")" != "$compilekey" || "$FLUTTER_TOOLS_DIR/pubspec.yaml" -nt "$FLUTTER_TOOLS_DIR/pubspec.lock" ]]; then |
| # Waits for the update lock to be acquired. Placing this check inside the |
| # conditional allows the majority of flutter/dart installations to bypass |
| # the lock entirely, but as a result this required a second verification that |
| # the SDK is up to date. |
| _wait_for_lock |
| |
| # A different shell process might have updated the tool/SDK. |
| if [[ -f "$SNAPSHOT_PATH" && -s "$STAMP_PATH" && "$(cat "$STAMP_PATH")" == "$compilekey" && "$FLUTTER_TOOLS_DIR/pubspec.yaml" -ot "$FLUTTER_TOOLS_DIR/pubspec.lock" ]]; then |
| exit $? |
| fi |
| |
| # Fetch Dart... |
| rm -f "$FLUTTER_ROOT/version" |
| touch "$FLUTTER_ROOT/bin/cache/.dartignore" |
| "$FLUTTER_ROOT/bin/internal/update_dart_sdk.sh" |
| |
| >&2 echo Building flutter tool... |
| |
| # Prepare packages... |
| VERBOSITY="--verbosity=error" |
| if [[ "$CI" == "true" || "$BOT" == "true" || "$CONTINUOUS_INTEGRATION" == "true" || "$CHROME_HEADLESS" == "1" ]]; then |
| PUB_ENVIRONMENT="$PUB_ENVIRONMENT:flutter_bot" |
| VERBOSITY="--verbosity=normal" |
| fi |
| export PUB_ENVIRONMENT="$PUB_ENVIRONMENT:flutter_install" |
| if [[ -d "$FLUTTER_ROOT/.pub-cache" ]]; then |
| export PUB_CACHE="${PUB_CACHE:-"$FLUTTER_ROOT/.pub-cache"}" |
| fi |
| pub_upgrade_with_retry |
| |
| # Compile... |
| "$DART" --verbosity=error --disable-dart-dev $FLUTTER_TOOL_ARGS --snapshot="$SNAPSHOT_PATH" --packages="$FLUTTER_TOOLS_DIR/.packages" --no-enable-mirrors "$SCRIPT_PATH" |
| echo "$compilekey" > "$STAMP_PATH" |
| fi |
| # The exit here is extraneous since the function is run in a subshell, but |
| # this serves as documentation that running the function in a subshell is |
| # required to make sure any lock directory created by mkdir is cleaned up. |
| exit $? |
| ) |
| |
| # This function is intended to be executed by entrypoints (e.g. `//bin/flutter` |
| # and `//bin/dart`). PROG_NAME and BIN_DIR should already be set by those |
| # entrypoints. |
| function shared::execute() { |
| export FLUTTER_ROOT="$(cd "${BIN_DIR}/.." ; pwd -P)" |
| |
| # If present, run the bootstrap script first |
| BOOTSTRAP_PATH="$FLUTTER_ROOT/bin/internal/bootstrap.sh" |
| if [ -f "$BOOTSTRAP_PATH" ]; then |
| source "$BOOTSTRAP_PATH" |
| fi |
| |
| FLUTTER_TOOLS_DIR="$FLUTTER_ROOT/packages/flutter_tools" |
| SNAPSHOT_PATH="$FLUTTER_ROOT/bin/cache/flutter_tools.snapshot" |
| STAMP_PATH="$FLUTTER_ROOT/bin/cache/flutter_tools.stamp" |
| SCRIPT_PATH="$FLUTTER_TOOLS_DIR/bin/flutter_tools.dart" |
| DART_SDK_PATH="$FLUTTER_ROOT/bin/cache/dart-sdk" |
| |
| DART="$DART_SDK_PATH/bin/dart" |
| |
| # If running over git-bash, overrides the default UNIX executables with win32 |
| # executables |
| case "$(uname -s)" in |
| MINGW*) |
| DART="$DART.exe" |
| ;; |
| esac |
| |
| # Test if running as superuser – but don't warn if running within Docker or CI. |
| if [[ "$EUID" == "0" && ! -f /.dockerenv && "$CI" != "true" && "$BOT" != "true" && "$CONTINUOUS_INTEGRATION" != "true" ]]; then |
| >&2 echo " Woah! You appear to be trying to run flutter as root." |
| >&2 echo " We strongly recommend running the flutter tool without superuser privileges." |
| >&2 echo " /" |
| >&2 echo "📎" |
| fi |
| |
| # Test if Git is available on the Host |
| if ! hash git 2>/dev/null; then |
| >&2 echo "Error: Unable to find git in your PATH." |
| exit 1 |
| fi |
| # Test if the flutter directory is a git clone (otherwise git rev-parse HEAD |
| # would fail) |
| if [[ ! -e "$FLUTTER_ROOT/.git" ]]; then |
| >&2 echo "Error: The Flutter directory is not a clone of the GitHub project." |
| >&2 echo " The flutter tool requires Git in order to operate properly;" |
| >&2 echo " to install Flutter, see the instructions at:" |
| >&2 echo " https://flutter.dev/get-started" |
| exit 1 |
| fi |
| |
| upgrade_flutter 7< "$PROG_NAME" |
| |
| BIN_NAME="$(basename "$PROG_NAME")" |
| case "$BIN_NAME" in |
| flutter*) |
| # FLUTTER_TOOL_ARGS aren't quoted below, because it is meant to be |
| # considered as separate space-separated args. |
| "$DART" --disable-dart-dev --packages="$FLUTTER_TOOLS_DIR/.packages" $FLUTTER_TOOL_ARGS "$SNAPSHOT_PATH" "$@" |
| ;; |
| dart*) |
| "$DART" "$@" |
| ;; |
| *) |
| >&2 echo "Error! Executable name $BIN_NAME not recognized!" |
| exit 1 |
| ;; |
| esac |
| } |