blob: 8282ea53c65c28b37582a4f6213ae300ba341419 [file] [log] [blame]
// Copyright 2018 The Abseil Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// https://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
// -----------------------------------------------------------------------------
// File: hash.h
// -----------------------------------------------------------------------------
//
// This header file defines the Abseil `hash` library and the Abseil hashing
// framework. This framework consists of the following:
//
// * The `absl::Hash` functor, which is used to invoke the hasher within the
// Abseil hashing framework. `absl::Hash<T>` supports most basic types and
// a number of Abseil types out of the box.
// * `AbslHashValue`, an extension point that allows you to extend types to
// support Abseil hashing without requiring you to define a hashing
// algorithm.
// * `HashState`, a type-erased class which implements the manipulation of the
// hash state (H) itself, contains member functions `combine()` and
// `combine_contiguous()`, which you can use to contribute to an existing
// hash state when hashing your types.
//
// Unlike `std::hash` or other hashing frameworks, the Abseil hashing framework
// provides most of its utility by abstracting away the hash algorithm (and its
// implementation) entirely. Instead, a type invokes the Abseil hashing
// framework by simply combining its state with the state of known, hashable
// types. Hashing of that combined state is separately done by `absl::Hash`.
//
// One should assume that a hash algorithm is chosen randomly at the start of
// each process. E.g., `absl::Hash<int>{}(9)` in one process and
// `absl::Hash<int>{}(9)` in another process are likely to differ.
//
// `absl::Hash` is intended to strongly mix input bits with a target of passing
// an [Avalanche Test](https://en.wikipedia.org/wiki/Avalanche_effect).
//
// Example:
//
// // Suppose we have a class `Circle` for which we want to add hashing:
// class Circle {
// public:
// ...
// private:
// std::pair<int, int> center_;
// int radius_;
// };
//
// // To add hashing support to `Circle`, we simply need to add a free
// // (non-member) function `AbslHashValue()`, and return the combined hash
// // state of the existing hash state and the class state. You can add such a
// // free function using a friend declaration within the body of the class:
// class Circle {
// public:
// ...
// template <typename H>
// friend H AbslHashValue(H h, const Circle& c) {
// return H::combine(std::move(h), c.center_, c.radius_);
// }
// ...
// };
//
// For more information, see Adding Type Support to `absl::Hash` below.
//
#ifndef ABSL_HASH_HASH_H_
#define ABSL_HASH_HASH_H_
#include <tuple>
#include "absl/hash/internal/hash.h"
namespace absl {
ABSL_NAMESPACE_BEGIN
// -----------------------------------------------------------------------------
// `absl::Hash`
// -----------------------------------------------------------------------------
//
// `absl::Hash<T>` is a convenient general-purpose hash functor for any type `T`
// satisfying any of the following conditions (in order):
//
// * T is an arithmetic or pointer type
// * T defines an overload for `AbslHashValue(H, const T&)` for an arbitrary
// hash state `H`.
// - T defines a specialization of `std::hash<T>`
//
// `absl::Hash` intrinsically supports the following types:
//
// * All integral types (including bool)
// * All enum types
// * All floating-point types (although hashing them is discouraged)
// * All pointer types, including nullptr_t
// * std::pair<T1, T2>, if T1 and T2 are hashable
// * std::tuple<Ts...>, if all the Ts... are hashable
// * std::unique_ptr and std::shared_ptr
// * All string-like types including:
// * absl::Cord
// * std::string
// * std::string_view (as well as any instance of std::basic_string that
// uses char and std::char_traits)
// * All the standard sequence containers (provided the elements are hashable)
// * All the standard ordered associative containers (provided the elements are
// hashable)
// * absl types such as the following:
// * absl::string_view
// * absl::InlinedVector
// * absl::FixedArray
// * absl::uint128
// * absl::Time, absl::Duration, and absl::TimeZone
//
// Note: the list above is not meant to be exhaustive. Additional type support
// may be added, in which case the above list will be updated.
//
// -----------------------------------------------------------------------------
// absl::Hash Invocation Evaluation
// -----------------------------------------------------------------------------
//
// When invoked, `absl::Hash<T>` searches for supplied hash functions in the
// following order:
//
// * Natively supported types out of the box (see above)
// * Types for which an `AbslHashValue()` overload is provided (such as
// user-defined types). See "Adding Type Support to `absl::Hash`" below.
// * Types which define a `std::hash<T>` specialization
//
// The fallback to legacy hash functions exists mainly for backwards
// compatibility. If you have a choice, prefer defining an `AbslHashValue`
// overload instead of specializing any legacy hash functors.
//
// -----------------------------------------------------------------------------
// The Hash State Concept, and using `HashState` for Type Erasure
// -----------------------------------------------------------------------------
//
// The `absl::Hash` framework relies on the Concept of a "hash state." Such a
// hash state is used in several places:
//
// * Within existing implementations of `absl::Hash<T>` to store the hashed
// state of an object. Note that it is up to the implementation how it stores
// such state. A hash table, for example, may mix the state to produce an
// integer value; a testing framework may simply hold a vector of that state.
// * Within implementations of `AbslHashValue()` used to extend user-defined
// types. (See "Adding Type Support to absl::Hash" below.)
// * Inside a `HashState`, providing type erasure for the concept of a hash
// state, which you can use to extend the `absl::Hash` framework for types
// that are otherwise difficult to extend using `AbslHashValue()`. (See the
// `HashState` class below.)
//
// The "hash state" concept contains two member functions for mixing hash state:
//
// * `H::combine(state, values...)`
//
// Combines an arbitrary number of values into a hash state, returning the
// updated state. Note that the existing hash state is move-only and must be
// passed by value.
//
// Each of the value types T must be hashable by H.
//
// NOTE:
//
// state = H::combine(std::move(state), value1, value2, value3);
//
// must be guaranteed to produce the same hash expansion as
//
// state = H::combine(std::move(state), value1);
// state = H::combine(std::move(state), value2);
// state = H::combine(std::move(state), value3);
//
// * `H::combine_contiguous(state, data, size)`
//
// Combines a contiguous array of `size` elements into a hash state,
// returning the updated state. Note that the existing hash state is
// move-only and must be passed by value.
//
// NOTE:
//
// state = H::combine_contiguous(std::move(state), data, size);
//
// need NOT be guaranteed to produce the same hash expansion as a loop
// (it may perform internal optimizations). If you need this guarantee, use a
// loop instead.
//
// -----------------------------------------------------------------------------
// Adding Type Support to `absl::Hash`
// -----------------------------------------------------------------------------
//
// To add support for your user-defined type, add a proper `AbslHashValue()`
// overload as a free (non-member) function. The overload will take an
// existing hash state and should combine that state with state from the type.
//
// Example:
//
// template <typename H>
// H AbslHashValue(H state, const MyType& v) {
// return H::combine(std::move(state), v.field1, ..., v.fieldN);
// }
//
// where `(field1, ..., fieldN)` are the members you would use on your
// `operator==` to define equality.
//
// Notice that `AbslHashValue` is not a class member, but an ordinary function.
// An `AbslHashValue` overload for a type should only be declared in the same
// file and namespace as said type. The proper `AbslHashValue` implementation
// for a given type will be discovered via ADL.
//
// Note: unlike `std::hash', `absl::Hash` should never be specialized. It must
// only be extended by adding `AbslHashValue()` overloads.
//
template <typename T>
using Hash = absl::hash_internal::Hash<T>;
// HashOf
//
// absl::HashOf() is a helper that generates a hash from the values of its
// arguments. It dispatches to absl::Hash directly, as follows:
// * HashOf(t) == absl::Hash<T>{}(t)
// * HashOf(a, b, c) == HashOf(std::make_tuple(a, b, c))
//
// HashOf(a1, a2, ...) == HashOf(b1, b2, ...) is guaranteed when
// * The argument lists have pairwise identical C++ types
// * a1 == b1 && a2 == b2 && ...
//
// The requirement that the arguments match in both type and value is critical.
// It means that `a == b` does not necessarily imply `HashOf(a) == HashOf(b)` if
// `a` and `b` have different types. For example, `HashOf(2) != HashOf(2.0)`.
template <int&... ExplicitArgumentBarrier, typename... Types>
size_t HashOf(const Types&... values) {
auto tuple = std::tie(values...);
return absl::Hash<decltype(tuple)>{}(tuple);
}
// HashState
//
// A type erased version of the hash state concept, for use in user-defined
// `AbslHashValue` implementations that can't use templates (such as PImpl
// classes, virtual functions, etc.). The type erasure adds overhead so it
// should be avoided unless necessary.
//
// Note: This wrapper will only erase calls to:
// combine_contiguous(H, const unsigned char*, size_t)
//
// All other calls will be handled internally and will not invoke overloads
// provided by the wrapped class.
//
// Users of this class should still define a template `AbslHashValue` function,
// but can use `absl::HashState::Create(&state)` to erase the type of the hash
// state and dispatch to their private hashing logic.
//
// This state can be used like any other hash state. In particular, you can call
// `HashState::combine()` and `HashState::combine_contiguous()` on it.
//
// Example:
//
// class Interface {
// public:
// template <typename H>
// friend H AbslHashValue(H state, const Interface& value) {
// state = H::combine(std::move(state), std::type_index(typeid(*this)));
// value.HashValue(absl::HashState::Create(&state));
// return state;
// }
// private:
// virtual void HashValue(absl::HashState state) const = 0;
// };
//
// class Impl : Interface {
// private:
// void HashValue(absl::HashState state) const override {
// absl::HashState::combine(std::move(state), v1_, v2_);
// }
// int v1_;
// std::string v2_;
// };
class HashState : public hash_internal::HashStateBase<HashState> {
public:
// HashState::Create()
//
// Create a new `HashState` instance that wraps `state`. All calls to
// `combine()` and `combine_contiguous()` on the new instance will be
// redirected to the original `state` object. The `state` object must outlive
// the `HashState` instance.
template <typename T>
static HashState Create(T* state) {
HashState s;
s.Init(state);
return s;
}
HashState(const HashState&) = delete;
HashState& operator=(const HashState&) = delete;
HashState(HashState&&) = default;
HashState& operator=(HashState&&) = default;
// HashState::combine()
//
// Combines an arbitrary number of values into a hash state, returning the
// updated state.
using HashState::HashStateBase::combine;
// HashState::combine_contiguous()
//
// Combines a contiguous array of `size` elements into a hash state, returning
// the updated state.
static HashState combine_contiguous(HashState hash_state,
const unsigned char* first, size_t size) {
hash_state.combine_contiguous_(hash_state.state_, first, size);
return hash_state;
}
using HashState::HashStateBase::combine_contiguous;
private:
HashState() = default;
template <typename T>
static void CombineContiguousImpl(void* p, const unsigned char* first,
size_t size) {
T& state = *static_cast<T*>(p);
state = T::combine_contiguous(std::move(state), first, size);
}
template <typename T>
void Init(T* state) {
state_ = state;
combine_contiguous_ = &CombineContiguousImpl<T>;
}
// Do not erase an already erased state.
void Init(HashState* state) {
state_ = state->state_;
combine_contiguous_ = state->combine_contiguous_;
}
void* state_;
void (*combine_contiguous_)(void*, const unsigned char*, size_t);
};
ABSL_NAMESPACE_END
} // namespace absl
#endif // ABSL_HASH_HASH_H_