| /**************************************************************************** |
| * |
| * cffdecode.c |
| * |
| * PostScript CFF (Type 2) decoding routines (body). |
| * |
| * Copyright (C) 2017-2022 by |
| * David Turner, Robert Wilhelm, and Werner Lemberg. |
| * |
| * This file is part of the FreeType project, and may only be used, |
| * modified, and distributed under the terms of the FreeType project |
| * license, LICENSE.TXT. By continuing to use, modify, or distribute |
| * this file you indicate that you have read the license and |
| * understand and accept it fully. |
| * |
| */ |
| |
| |
| #include <freetype/freetype.h> |
| #include <freetype/internal/ftdebug.h> |
| #include <freetype/internal/ftserv.h> |
| #include <freetype/internal/services/svcfftl.h> |
| |
| #include "cffdecode.h" |
| #include "psobjs.h" |
| |
| #include "psauxerr.h" |
| |
| |
| /************************************************************************** |
| * |
| * The macro FT_COMPONENT is used in trace mode. It is an implicit |
| * parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log |
| * messages during execution. |
| */ |
| #undef FT_COMPONENT |
| #define FT_COMPONENT cffdecode |
| |
| |
| #ifdef CFF_CONFIG_OPTION_OLD_ENGINE |
| |
| typedef enum CFF_Operator_ |
| { |
| cff_op_unknown = 0, |
| |
| cff_op_rmoveto, |
| cff_op_hmoveto, |
| cff_op_vmoveto, |
| |
| cff_op_rlineto, |
| cff_op_hlineto, |
| cff_op_vlineto, |
| |
| cff_op_rrcurveto, |
| cff_op_hhcurveto, |
| cff_op_hvcurveto, |
| cff_op_rcurveline, |
| cff_op_rlinecurve, |
| cff_op_vhcurveto, |
| cff_op_vvcurveto, |
| |
| cff_op_flex, |
| cff_op_hflex, |
| cff_op_hflex1, |
| cff_op_flex1, |
| |
| cff_op_endchar, |
| |
| cff_op_hstem, |
| cff_op_vstem, |
| cff_op_hstemhm, |
| cff_op_vstemhm, |
| |
| cff_op_hintmask, |
| cff_op_cntrmask, |
| cff_op_dotsection, /* deprecated, acts as no-op */ |
| |
| cff_op_abs, |
| cff_op_add, |
| cff_op_sub, |
| cff_op_div, |
| cff_op_neg, |
| cff_op_random, |
| cff_op_mul, |
| cff_op_sqrt, |
| |
| cff_op_blend, |
| |
| cff_op_drop, |
| cff_op_exch, |
| cff_op_index, |
| cff_op_roll, |
| cff_op_dup, |
| |
| cff_op_put, |
| cff_op_get, |
| cff_op_store, |
| cff_op_load, |
| |
| cff_op_and, |
| cff_op_or, |
| cff_op_not, |
| cff_op_eq, |
| cff_op_ifelse, |
| |
| cff_op_callsubr, |
| cff_op_callgsubr, |
| cff_op_return, |
| |
| /* Type 1 opcodes: invalid but seen in real life */ |
| cff_op_hsbw, |
| cff_op_closepath, |
| cff_op_callothersubr, |
| cff_op_pop, |
| cff_op_seac, |
| cff_op_sbw, |
| cff_op_setcurrentpoint, |
| |
| /* do not remove */ |
| cff_op_max |
| |
| } CFF_Operator; |
| |
| |
| #define CFF_COUNT_CHECK_WIDTH 0x80 |
| #define CFF_COUNT_EXACT 0x40 |
| #define CFF_COUNT_CLEAR_STACK 0x20 |
| |
| /* count values which have the `CFF_COUNT_CHECK_WIDTH' flag set are */ |
| /* used for checking the width and requested numbers of arguments */ |
| /* only; they are set to zero afterwards */ |
| |
| /* the other two flags are informative only and unused currently */ |
| |
| static const FT_Byte cff_argument_counts[] = |
| { |
| 0, /* unknown */ |
| |
| 2 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, /* rmoveto */ |
| 1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, |
| 1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, |
| |
| 0 | CFF_COUNT_CLEAR_STACK, /* rlineto */ |
| 0 | CFF_COUNT_CLEAR_STACK, |
| 0 | CFF_COUNT_CLEAR_STACK, |
| |
| 0 | CFF_COUNT_CLEAR_STACK, /* rrcurveto */ |
| 0 | CFF_COUNT_CLEAR_STACK, |
| 0 | CFF_COUNT_CLEAR_STACK, |
| 0 | CFF_COUNT_CLEAR_STACK, |
| 0 | CFF_COUNT_CLEAR_STACK, |
| 0 | CFF_COUNT_CLEAR_STACK, |
| 0 | CFF_COUNT_CLEAR_STACK, |
| |
| 13, /* flex */ |
| 7, |
| 9, |
| 11, |
| |
| 0 | CFF_COUNT_CHECK_WIDTH, /* endchar */ |
| |
| 2 | CFF_COUNT_CHECK_WIDTH, /* hstem */ |
| 2 | CFF_COUNT_CHECK_WIDTH, |
| 2 | CFF_COUNT_CHECK_WIDTH, |
| 2 | CFF_COUNT_CHECK_WIDTH, |
| |
| 0 | CFF_COUNT_CHECK_WIDTH, /* hintmask */ |
| 0 | CFF_COUNT_CHECK_WIDTH, /* cntrmask */ |
| 0, /* dotsection */ |
| |
| 1, /* abs */ |
| 2, |
| 2, |
| 2, |
| 1, |
| 0, |
| 2, |
| 1, |
| |
| 1, /* blend */ |
| |
| 1, /* drop */ |
| 2, |
| 1, |
| 2, |
| 1, |
| |
| 2, /* put */ |
| 1, |
| 4, |
| 3, |
| |
| 2, /* and */ |
| 2, |
| 1, |
| 2, |
| 4, |
| |
| 1, /* callsubr */ |
| 1, |
| 0, |
| |
| 2, /* hsbw */ |
| 0, |
| 0, |
| 0, |
| 5, /* seac */ |
| 4, /* sbw */ |
| 2 /* setcurrentpoint */ |
| }; |
| |
| |
| static FT_Error |
| cff_operator_seac( CFF_Decoder* decoder, |
| FT_Pos asb, |
| FT_Pos adx, |
| FT_Pos ady, |
| FT_Int bchar, |
| FT_Int achar ) |
| { |
| FT_Error error; |
| CFF_Builder* builder = &decoder->builder; |
| FT_Int bchar_index, achar_index; |
| TT_Face face = decoder->builder.face; |
| FT_Vector left_bearing, advance; |
| FT_Byte* charstring; |
| FT_ULong charstring_len; |
| FT_Pos glyph_width; |
| |
| |
| if ( decoder->seac ) |
| { |
| FT_ERROR(( "cff_operator_seac: invalid nested seac\n" )); |
| return FT_THROW( Syntax_Error ); |
| } |
| |
| adx = ADD_LONG( adx, decoder->builder.left_bearing.x ); |
| ady = ADD_LONG( ady, decoder->builder.left_bearing.y ); |
| |
| #ifdef FT_CONFIG_OPTION_INCREMENTAL |
| /* Incremental fonts don't necessarily have valid charsets. */ |
| /* They use the character code, not the glyph index, in this case. */ |
| if ( face->root.internal->incremental_interface ) |
| { |
| bchar_index = bchar; |
| achar_index = achar; |
| } |
| else |
| #endif /* FT_CONFIG_OPTION_INCREMENTAL */ |
| { |
| CFF_Font cff = (CFF_Font)(face->extra.data); |
| |
| |
| bchar_index = cff_lookup_glyph_by_stdcharcode( cff, bchar ); |
| achar_index = cff_lookup_glyph_by_stdcharcode( cff, achar ); |
| } |
| |
| if ( bchar_index < 0 || achar_index < 0 ) |
| { |
| FT_ERROR(( "cff_operator_seac:" |
| " invalid seac character code arguments\n" )); |
| return FT_THROW( Syntax_Error ); |
| } |
| |
| /* If we are trying to load a composite glyph, do not load the */ |
| /* accent character and return the array of subglyphs. */ |
| if ( builder->no_recurse ) |
| { |
| FT_GlyphSlot glyph = (FT_GlyphSlot)builder->glyph; |
| FT_GlyphLoader loader = glyph->internal->loader; |
| FT_SubGlyph subg; |
| |
| |
| /* reallocate subglyph array if necessary */ |
| error = FT_GlyphLoader_CheckSubGlyphs( loader, 2 ); |
| if ( error ) |
| goto Exit; |
| |
| subg = loader->current.subglyphs; |
| |
| /* subglyph 0 = base character */ |
| subg->index = bchar_index; |
| subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES | |
| FT_SUBGLYPH_FLAG_USE_MY_METRICS; |
| subg->arg1 = 0; |
| subg->arg2 = 0; |
| subg++; |
| |
| /* subglyph 1 = accent character */ |
| subg->index = achar_index; |
| subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES; |
| subg->arg1 = (FT_Int)( adx >> 16 ); |
| subg->arg2 = (FT_Int)( ady >> 16 ); |
| |
| /* set up remaining glyph fields */ |
| glyph->num_subglyphs = 2; |
| glyph->subglyphs = loader->base.subglyphs; |
| glyph->format = FT_GLYPH_FORMAT_COMPOSITE; |
| |
| loader->current.num_subglyphs = 2; |
| } |
| |
| FT_GlyphLoader_Prepare( builder->loader ); |
| |
| /* First load `bchar' in builder */ |
| error = decoder->get_glyph_callback( face, (FT_UInt)bchar_index, |
| &charstring, &charstring_len ); |
| if ( !error ) |
| { |
| /* the seac operator must not be nested */ |
| decoder->seac = TRUE; |
| error = cff_decoder_parse_charstrings( decoder, charstring, |
| charstring_len, 0 ); |
| decoder->seac = FALSE; |
| |
| decoder->free_glyph_callback( face, &charstring, charstring_len ); |
| |
| if ( error ) |
| goto Exit; |
| } |
| |
| /* Save the left bearing, advance and glyph width of the base */ |
| /* character as they will be erased by the next load. */ |
| |
| left_bearing = builder->left_bearing; |
| advance = builder->advance; |
| glyph_width = decoder->glyph_width; |
| |
| builder->left_bearing.x = 0; |
| builder->left_bearing.y = 0; |
| |
| builder->pos_x = SUB_LONG( adx, asb ); |
| builder->pos_y = ady; |
| |
| /* Now load `achar' on top of the base outline. */ |
| error = decoder->get_glyph_callback( face, (FT_UInt)achar_index, |
| &charstring, &charstring_len ); |
| if ( !error ) |
| { |
| /* the seac operator must not be nested */ |
| decoder->seac = TRUE; |
| error = cff_decoder_parse_charstrings( decoder, charstring, |
| charstring_len, 0 ); |
| decoder->seac = FALSE; |
| |
| decoder->free_glyph_callback( face, &charstring, charstring_len ); |
| |
| if ( error ) |
| goto Exit; |
| } |
| |
| /* Restore the left side bearing, advance and glyph width */ |
| /* of the base character. */ |
| builder->left_bearing = left_bearing; |
| builder->advance = advance; |
| decoder->glyph_width = glyph_width; |
| |
| builder->pos_x = 0; |
| builder->pos_y = 0; |
| |
| Exit: |
| return error; |
| } |
| |
| #endif /* CFF_CONFIG_OPTION_OLD_ENGINE */ |
| |
| |
| /*************************************************************************/ |
| /*************************************************************************/ |
| /*************************************************************************/ |
| /********** *********/ |
| /********** *********/ |
| /********** GENERIC CHARSTRING PARSING *********/ |
| /********** *********/ |
| /********** *********/ |
| /*************************************************************************/ |
| /*************************************************************************/ |
| /*************************************************************************/ |
| |
| /************************************************************************** |
| * |
| * @Function: |
| * cff_compute_bias |
| * |
| * @Description: |
| * Computes the bias value in dependence of the number of glyph |
| * subroutines. |
| * |
| * @Input: |
| * in_charstring_type :: |
| * The `CharstringType' value of the top DICT |
| * dictionary. |
| * |
| * num_subrs :: |
| * The number of glyph subroutines. |
| * |
| * @Return: |
| * The bias value. |
| */ |
| static FT_Int |
| cff_compute_bias( FT_Int in_charstring_type, |
| FT_UInt num_subrs ) |
| { |
| FT_Int result; |
| |
| |
| if ( in_charstring_type == 1 ) |
| result = 0; |
| else if ( num_subrs < 1240 ) |
| result = 107; |
| else if ( num_subrs < 33900U ) |
| result = 1131; |
| else |
| result = 32768U; |
| |
| return result; |
| } |
| |
| |
| FT_LOCAL_DEF( FT_Int ) |
| cff_lookup_glyph_by_stdcharcode( CFF_Font cff, |
| FT_Int charcode ) |
| { |
| FT_UInt n; |
| FT_UShort glyph_sid; |
| |
| FT_Service_CFFLoad cffload; |
| |
| |
| /* CID-keyed fonts don't have glyph names */ |
| if ( !cff->charset.sids ) |
| return -1; |
| |
| /* check range of standard char code */ |
| if ( charcode < 0 || charcode > 255 ) |
| return -1; |
| |
| #if 0 |
| /* retrieve cffload from list of current modules */ |
| FT_Service_CFFLoad cffload; |
| |
| |
| FT_FACE_FIND_GLOBAL_SERVICE( face, cffload, CFF_LOAD ); |
| if ( !cffload ) |
| { |
| FT_ERROR(( "cff_lookup_glyph_by_stdcharcode:" |
| " the `cffload' module is not available\n" )); |
| return FT_THROW( Unimplemented_Feature ); |
| } |
| #endif |
| |
| cffload = (FT_Service_CFFLoad)cff->cffload; |
| |
| /* Get code to SID mapping from `cff_standard_encoding'. */ |
| glyph_sid = cffload->get_standard_encoding( (FT_UInt)charcode ); |
| |
| for ( n = 0; n < cff->num_glyphs; n++ ) |
| { |
| if ( cff->charset.sids[n] == glyph_sid ) |
| return (FT_Int)n; |
| } |
| |
| return -1; |
| } |
| |
| |
| #ifdef CFF_CONFIG_OPTION_OLD_ENGINE |
| |
| /************************************************************************** |
| * |
| * @Function: |
| * cff_decoder_parse_charstrings |
| * |
| * @Description: |
| * Parses a given Type 2 charstrings program. |
| * |
| * @InOut: |
| * decoder :: |
| * The current Type 1 decoder. |
| * |
| * @Input: |
| * charstring_base :: |
| * The base of the charstring stream. |
| * |
| * charstring_len :: |
| * The length in bytes of the charstring stream. |
| * |
| * in_dict :: |
| * Set to 1 if function is called from top or |
| * private DICT (needed for Multiple Master CFFs). |
| * |
| * @Return: |
| * FreeType error code. 0 means success. |
| */ |
| FT_LOCAL_DEF( FT_Error ) |
| cff_decoder_parse_charstrings( CFF_Decoder* decoder, |
| FT_Byte* charstring_base, |
| FT_ULong charstring_len, |
| FT_Bool in_dict ) |
| { |
| FT_Error error; |
| CFF_Decoder_Zone* zone; |
| FT_Byte* ip; |
| FT_Byte* limit; |
| CFF_Builder* builder = &decoder->builder; |
| FT_Pos x, y; |
| FT_Fixed* stack; |
| FT_Int charstring_type = |
| decoder->cff->top_font.font_dict.charstring_type; |
| FT_UShort num_designs = |
| decoder->cff->top_font.font_dict.num_designs; |
| FT_UShort num_axes = |
| decoder->cff->top_font.font_dict.num_axes; |
| |
| T2_Hints_Funcs hinter; |
| |
| |
| /* set default width */ |
| decoder->num_hints = 0; |
| decoder->read_width = 1; |
| |
| /* initialize the decoder */ |
| decoder->top = decoder->stack; |
| decoder->zone = decoder->zones; |
| zone = decoder->zones; |
| stack = decoder->top; |
| |
| hinter = (T2_Hints_Funcs)builder->hints_funcs; |
| |
| builder->path_begun = 0; |
| |
| if ( !charstring_base ) |
| return FT_Err_Ok; |
| |
| zone->base = charstring_base; |
| limit = zone->limit = charstring_base + charstring_len; |
| ip = zone->cursor = zone->base; |
| |
| error = FT_Err_Ok; |
| |
| x = builder->pos_x; |
| y = builder->pos_y; |
| |
| /* begin hints recording session, if any */ |
| if ( hinter ) |
| hinter->open( hinter->hints ); |
| |
| /* now execute loop */ |
| while ( ip < limit ) |
| { |
| CFF_Operator op; |
| FT_Byte v; |
| |
| |
| /********************************************************************* |
| * |
| * Decode operator or operand |
| */ |
| v = *ip++; |
| if ( v >= 32 || v == 28 ) |
| { |
| FT_Int shift = 16; |
| FT_Int32 val; |
| |
| |
| /* this is an operand, push it on the stack */ |
| |
| /* if we use shifts, all computations are done with unsigned */ |
| /* values; the conversion to a signed value is the last step */ |
| if ( v == 28 ) |
| { |
| if ( ip + 1 >= limit ) |
| goto Syntax_Error; |
| val = (FT_Short)( ( (FT_UShort)ip[0] << 8 ) | ip[1] ); |
| ip += 2; |
| } |
| else if ( v < 247 ) |
| val = (FT_Int32)v - 139; |
| else if ( v < 251 ) |
| { |
| if ( ip >= limit ) |
| goto Syntax_Error; |
| val = ( (FT_Int32)v - 247 ) * 256 + *ip++ + 108; |
| } |
| else if ( v < 255 ) |
| { |
| if ( ip >= limit ) |
| goto Syntax_Error; |
| val = -( (FT_Int32)v - 251 ) * 256 - *ip++ - 108; |
| } |
| else |
| { |
| if ( ip + 3 >= limit ) |
| goto Syntax_Error; |
| val = (FT_Int32)( ( (FT_UInt32)ip[0] << 24 ) | |
| ( (FT_UInt32)ip[1] << 16 ) | |
| ( (FT_UInt32)ip[2] << 8 ) | |
| (FT_UInt32)ip[3] ); |
| ip += 4; |
| if ( charstring_type == 2 ) |
| shift = 0; |
| } |
| if ( decoder->top - stack >= CFF_MAX_OPERANDS ) |
| goto Stack_Overflow; |
| |
| val = (FT_Int32)( (FT_UInt32)val << shift ); |
| *decoder->top++ = val; |
| |
| #ifdef FT_DEBUG_LEVEL_TRACE |
| if ( !( val & 0xFFFFL ) ) |
| FT_TRACE4(( " %hd", (FT_Short)( (FT_UInt32)val >> 16 ) )); |
| else |
| FT_TRACE4(( " %.5f", val / 65536.0 )); |
| #endif |
| |
| } |
| else |
| { |
| /* The specification says that normally arguments are to be taken */ |
| /* from the bottom of the stack. However, this seems not to be */ |
| /* correct, at least for Acroread 7.0.8 on GNU/Linux: It pops the */ |
| /* arguments similar to a PS interpreter. */ |
| |
| FT_Fixed* args = decoder->top; |
| FT_Int num_args = (FT_Int)( args - decoder->stack ); |
| FT_Int req_args; |
| |
| |
| /* find operator */ |
| op = cff_op_unknown; |
| |
| switch ( v ) |
| { |
| case 1: |
| op = cff_op_hstem; |
| break; |
| case 3: |
| op = cff_op_vstem; |
| break; |
| case 4: |
| op = cff_op_vmoveto; |
| break; |
| case 5: |
| op = cff_op_rlineto; |
| break; |
| case 6: |
| op = cff_op_hlineto; |
| break; |
| case 7: |
| op = cff_op_vlineto; |
| break; |
| case 8: |
| op = cff_op_rrcurveto; |
| break; |
| case 9: |
| op = cff_op_closepath; |
| break; |
| case 10: |
| op = cff_op_callsubr; |
| break; |
| case 11: |
| op = cff_op_return; |
| break; |
| case 12: |
| if ( ip >= limit ) |
| goto Syntax_Error; |
| v = *ip++; |
| |
| switch ( v ) |
| { |
| case 0: |
| op = cff_op_dotsection; |
| break; |
| case 1: /* this is actually the Type1 vstem3 operator */ |
| op = cff_op_vstem; |
| break; |
| case 2: /* this is actually the Type1 hstem3 operator */ |
| op = cff_op_hstem; |
| break; |
| case 3: |
| op = cff_op_and; |
| break; |
| case 4: |
| op = cff_op_or; |
| break; |
| case 5: |
| op = cff_op_not; |
| break; |
| case 6: |
| op = cff_op_seac; |
| break; |
| case 7: |
| op = cff_op_sbw; |
| break; |
| case 8: |
| op = cff_op_store; |
| break; |
| case 9: |
| op = cff_op_abs; |
| break; |
| case 10: |
| op = cff_op_add; |
| break; |
| case 11: |
| op = cff_op_sub; |
| break; |
| case 12: |
| op = cff_op_div; |
| break; |
| case 13: |
| op = cff_op_load; |
| break; |
| case 14: |
| op = cff_op_neg; |
| break; |
| case 15: |
| op = cff_op_eq; |
| break; |
| case 16: |
| op = cff_op_callothersubr; |
| break; |
| case 17: |
| op = cff_op_pop; |
| break; |
| case 18: |
| op = cff_op_drop; |
| break; |
| case 20: |
| op = cff_op_put; |
| break; |
| case 21: |
| op = cff_op_get; |
| break; |
| case 22: |
| op = cff_op_ifelse; |
| break; |
| case 23: |
| op = cff_op_random; |
| break; |
| case 24: |
| op = cff_op_mul; |
| break; |
| case 26: |
| op = cff_op_sqrt; |
| break; |
| case 27: |
| op = cff_op_dup; |
| break; |
| case 28: |
| op = cff_op_exch; |
| break; |
| case 29: |
| op = cff_op_index; |
| break; |
| case 30: |
| op = cff_op_roll; |
| break; |
| case 33: |
| op = cff_op_setcurrentpoint; |
| break; |
| case 34: |
| op = cff_op_hflex; |
| break; |
| case 35: |
| op = cff_op_flex; |
| break; |
| case 36: |
| op = cff_op_hflex1; |
| break; |
| case 37: |
| op = cff_op_flex1; |
| break; |
| default: |
| FT_TRACE4(( " unknown op (12, %d)\n", v )); |
| break; |
| } |
| break; |
| case 13: |
| op = cff_op_hsbw; |
| break; |
| case 14: |
| op = cff_op_endchar; |
| break; |
| case 16: |
| op = cff_op_blend; |
| break; |
| case 18: |
| op = cff_op_hstemhm; |
| break; |
| case 19: |
| op = cff_op_hintmask; |
| break; |
| case 20: |
| op = cff_op_cntrmask; |
| break; |
| case 21: |
| op = cff_op_rmoveto; |
| break; |
| case 22: |
| op = cff_op_hmoveto; |
| break; |
| case 23: |
| op = cff_op_vstemhm; |
| break; |
| case 24: |
| op = cff_op_rcurveline; |
| break; |
| case 25: |
| op = cff_op_rlinecurve; |
| break; |
| case 26: |
| op = cff_op_vvcurveto; |
| break; |
| case 27: |
| op = cff_op_hhcurveto; |
| break; |
| case 29: |
| op = cff_op_callgsubr; |
| break; |
| case 30: |
| op = cff_op_vhcurveto; |
| break; |
| case 31: |
| op = cff_op_hvcurveto; |
| break; |
| default: |
| FT_TRACE4(( " unknown op (%d)\n", v )); |
| break; |
| } |
| |
| if ( op == cff_op_unknown ) |
| continue; |
| |
| /* in Multiple Master CFFs, T2 charstrings can appear in */ |
| /* dictionaries, but some operators are prohibited */ |
| if ( in_dict ) |
| { |
| switch ( op ) |
| { |
| case cff_op_hstem: |
| case cff_op_vstem: |
| case cff_op_vmoveto: |
| case cff_op_rlineto: |
| case cff_op_hlineto: |
| case cff_op_vlineto: |
| case cff_op_rrcurveto: |
| case cff_op_hstemhm: |
| case cff_op_hintmask: |
| case cff_op_cntrmask: |
| case cff_op_rmoveto: |
| case cff_op_hmoveto: |
| case cff_op_vstemhm: |
| case cff_op_rcurveline: |
| case cff_op_rlinecurve: |
| case cff_op_vvcurveto: |
| case cff_op_hhcurveto: |
| case cff_op_vhcurveto: |
| case cff_op_hvcurveto: |
| case cff_op_hflex: |
| case cff_op_flex: |
| case cff_op_hflex1: |
| case cff_op_flex1: |
| case cff_op_callsubr: |
| case cff_op_callgsubr: |
| /* deprecated opcodes */ |
| case cff_op_dotsection: |
| /* invalid Type 1 opcodes */ |
| case cff_op_hsbw: |
| case cff_op_closepath: |
| case cff_op_callothersubr: |
| case cff_op_seac: |
| case cff_op_sbw: |
| case cff_op_setcurrentpoint: |
| goto MM_Error; |
| |
| default: |
| break; |
| } |
| } |
| |
| /* check arguments */ |
| req_args = cff_argument_counts[op]; |
| if ( req_args & CFF_COUNT_CHECK_WIDTH ) |
| { |
| if ( num_args > 0 && decoder->read_width ) |
| { |
| /* If `nominal_width' is non-zero, the number is really a */ |
| /* difference against `nominal_width'. Else, the number here */ |
| /* is truly a width, not a difference against `nominal_width'. */ |
| /* If the font does not set `nominal_width', then */ |
| /* `nominal_width' defaults to zero, and so we can set */ |
| /* `glyph_width' to `nominal_width' plus number on the stack */ |
| /* -- for either case. */ |
| |
| FT_Int set_width_ok; |
| |
| |
| switch ( op ) |
| { |
| case cff_op_hmoveto: |
| case cff_op_vmoveto: |
| set_width_ok = num_args & 2; |
| break; |
| |
| case cff_op_hstem: |
| case cff_op_vstem: |
| case cff_op_hstemhm: |
| case cff_op_vstemhm: |
| case cff_op_rmoveto: |
| case cff_op_hintmask: |
| case cff_op_cntrmask: |
| set_width_ok = num_args & 1; |
| break; |
| |
| case cff_op_endchar: |
| /* If there is a width specified for endchar, we either have */ |
| /* 1 argument or 5 arguments. We like to argue. */ |
| set_width_ok = in_dict |
| ? 0 |
| : ( ( num_args == 5 ) || ( num_args == 1 ) ); |
| break; |
| |
| default: |
| set_width_ok = 0; |
| break; |
| } |
| |
| if ( set_width_ok ) |
| { |
| decoder->glyph_width = decoder->nominal_width + |
| ( stack[0] >> 16 ); |
| |
| if ( decoder->width_only ) |
| { |
| /* we only want the advance width; stop here */ |
| break; |
| } |
| |
| /* Consumed an argument. */ |
| num_args--; |
| } |
| } |
| |
| decoder->read_width = 0; |
| req_args = 0; |
| } |
| |
| req_args &= 0x000F; |
| if ( num_args < req_args ) |
| goto Stack_Underflow; |
| args -= req_args; |
| num_args -= req_args; |
| |
| /* At this point, `args' points to the first argument of the */ |
| /* operand in case `req_args' isn't zero. Otherwise, we have */ |
| /* to adjust `args' manually. */ |
| |
| /* Note that we only pop arguments from the stack which we */ |
| /* really need and can digest so that we can continue in case */ |
| /* of superfluous stack elements. */ |
| |
| switch ( op ) |
| { |
| case cff_op_hstem: |
| case cff_op_vstem: |
| case cff_op_hstemhm: |
| case cff_op_vstemhm: |
| /* the number of arguments is always even here */ |
| FT_TRACE4(( "%s\n", |
| op == cff_op_hstem ? " hstem" : |
| ( op == cff_op_vstem ? " vstem" : |
| ( op == cff_op_hstemhm ? " hstemhm" : " vstemhm" ) ) )); |
| |
| if ( hinter ) |
| hinter->stems( hinter->hints, |
| ( op == cff_op_hstem || op == cff_op_hstemhm ), |
| num_args / 2, |
| args - ( num_args & ~1 ) ); |
| |
| decoder->num_hints += num_args / 2; |
| args = stack; |
| break; |
| |
| case cff_op_hintmask: |
| case cff_op_cntrmask: |
| FT_TRACE4(( "%s", op == cff_op_hintmask ? " hintmask" |
| : " cntrmask" )); |
| |
| /* implement vstem when needed -- */ |
| /* the specification doesn't say it, but this also works */ |
| /* with the 'cntrmask' operator */ |
| /* */ |
| if ( num_args > 0 ) |
| { |
| if ( hinter ) |
| hinter->stems( hinter->hints, |
| 0, |
| num_args / 2, |
| args - ( num_args & ~1 ) ); |
| |
| decoder->num_hints += num_args / 2; |
| } |
| |
| /* In a valid charstring there must be at least one byte */ |
| /* after `hintmask' or `cntrmask' (e.g., for a `return' */ |
| /* instruction). Additionally, there must be space for */ |
| /* `num_hints' bits. */ |
| |
| if ( ( ip + ( ( decoder->num_hints + 7 ) >> 3 ) ) >= limit ) |
| goto Syntax_Error; |
| |
| if ( hinter ) |
| { |
| if ( op == cff_op_hintmask ) |
| hinter->hintmask( hinter->hints, |
| (FT_UInt)builder->current->n_points, |
| (FT_UInt)decoder->num_hints, |
| ip ); |
| else |
| hinter->counter( hinter->hints, |
| (FT_UInt)decoder->num_hints, |
| ip ); |
| } |
| |
| #ifdef FT_DEBUG_LEVEL_TRACE |
| { |
| FT_UInt maskbyte; |
| |
| |
| FT_TRACE4(( " (maskbytes:" )); |
| |
| for ( maskbyte = 0; |
| maskbyte < (FT_UInt)( ( decoder->num_hints + 7 ) >> 3 ); |
| maskbyte++, ip++ ) |
| FT_TRACE4(( " 0x%02X", *ip )); |
| |
| FT_TRACE4(( ")\n" )); |
| } |
| #else |
| ip += ( decoder->num_hints + 7 ) >> 3; |
| #endif |
| args = stack; |
| break; |
| |
| case cff_op_rmoveto: |
| FT_TRACE4(( " rmoveto\n" )); |
| |
| cff_builder_close_contour( builder ); |
| builder->path_begun = 0; |
| x = ADD_LONG( x, args[-2] ); |
| y = ADD_LONG( y, args[-1] ); |
| args = stack; |
| break; |
| |
| case cff_op_vmoveto: |
| FT_TRACE4(( " vmoveto\n" )); |
| |
| cff_builder_close_contour( builder ); |
| builder->path_begun = 0; |
| y = ADD_LONG( y, args[-1] ); |
| args = stack; |
| break; |
| |
| case cff_op_hmoveto: |
| FT_TRACE4(( " hmoveto\n" )); |
| |
| cff_builder_close_contour( builder ); |
| builder->path_begun = 0; |
| x = ADD_LONG( x, args[-1] ); |
| args = stack; |
| break; |
| |
| case cff_op_rlineto: |
| FT_TRACE4(( " rlineto\n" )); |
| |
| if ( cff_builder_start_point( builder, x, y ) || |
| cff_check_points( builder, num_args / 2 ) ) |
| goto Fail; |
| |
| if ( num_args < 2 ) |
| goto Stack_Underflow; |
| |
| args -= num_args & ~1; |
| while ( args < decoder->top ) |
| { |
| x = ADD_LONG( x, args[0] ); |
| y = ADD_LONG( y, args[1] ); |
| cff_builder_add_point( builder, x, y, 1 ); |
| args += 2; |
| } |
| args = stack; |
| break; |
| |
| case cff_op_hlineto: |
| case cff_op_vlineto: |
| { |
| FT_Int phase = ( op == cff_op_hlineto ); |
| |
| |
| FT_TRACE4(( "%s\n", op == cff_op_hlineto ? " hlineto" |
| : " vlineto" )); |
| |
| if ( num_args < 0 ) |
| goto Stack_Underflow; |
| |
| /* there exist subsetted fonts (found in PDFs) */ |
| /* which call `hlineto' without arguments */ |
| if ( num_args == 0 ) |
| break; |
| |
| if ( cff_builder_start_point( builder, x, y ) || |
| cff_check_points( builder, num_args ) ) |
| goto Fail; |
| |
| args = stack; |
| while ( args < decoder->top ) |
| { |
| if ( phase ) |
| x = ADD_LONG( x, args[0] ); |
| else |
| y = ADD_LONG( y, args[0] ); |
| |
| if ( cff_builder_add_point1( builder, x, y ) ) |
| goto Fail; |
| |
| args++; |
| phase ^= 1; |
| } |
| args = stack; |
| } |
| break; |
| |
| case cff_op_rrcurveto: |
| { |
| FT_Int nargs; |
| |
| |
| FT_TRACE4(( " rrcurveto\n" )); |
| |
| if ( num_args < 6 ) |
| goto Stack_Underflow; |
| |
| nargs = num_args - num_args % 6; |
| |
| if ( cff_builder_start_point( builder, x, y ) || |
| cff_check_points( builder, nargs / 2 ) ) |
| goto Fail; |
| |
| args -= nargs; |
| while ( args < decoder->top ) |
| { |
| x = ADD_LONG( x, args[0] ); |
| y = ADD_LONG( y, args[1] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| x = ADD_LONG( x, args[2] ); |
| y = ADD_LONG( y, args[3] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| x = ADD_LONG( x, args[4] ); |
| y = ADD_LONG( y, args[5] ); |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| args += 6; |
| } |
| args = stack; |
| } |
| break; |
| |
| case cff_op_vvcurveto: |
| { |
| FT_Int nargs; |
| |
| |
| FT_TRACE4(( " vvcurveto\n" )); |
| |
| if ( num_args < 4 ) |
| goto Stack_Underflow; |
| |
| /* if num_args isn't of the form 4n or 4n+1, */ |
| /* we enforce it by clearing the second bit */ |
| |
| nargs = num_args & ~2; |
| |
| if ( cff_builder_start_point( builder, x, y ) ) |
| goto Fail; |
| |
| args -= nargs; |
| |
| if ( nargs & 1 ) |
| { |
| x = ADD_LONG( x, args[0] ); |
| args++; |
| nargs--; |
| } |
| |
| if ( cff_check_points( builder, 3 * ( nargs / 4 ) ) ) |
| goto Fail; |
| |
| while ( args < decoder->top ) |
| { |
| y = ADD_LONG( y, args[0] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| x = ADD_LONG( x, args[1] ); |
| y = ADD_LONG( y, args[2] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| y = ADD_LONG( y, args[3] ); |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| args += 4; |
| } |
| args = stack; |
| } |
| break; |
| |
| case cff_op_hhcurveto: |
| { |
| FT_Int nargs; |
| |
| |
| FT_TRACE4(( " hhcurveto\n" )); |
| |
| if ( num_args < 4 ) |
| goto Stack_Underflow; |
| |
| /* if num_args isn't of the form 4n or 4n+1, */ |
| /* we enforce it by clearing the second bit */ |
| |
| nargs = num_args & ~2; |
| |
| if ( cff_builder_start_point( builder, x, y ) ) |
| goto Fail; |
| |
| args -= nargs; |
| if ( nargs & 1 ) |
| { |
| y = ADD_LONG( y, args[0] ); |
| args++; |
| nargs--; |
| } |
| |
| if ( cff_check_points( builder, 3 * ( nargs / 4 ) ) ) |
| goto Fail; |
| |
| while ( args < decoder->top ) |
| { |
| x = ADD_LONG( x, args[0] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| x = ADD_LONG( x, args[1] ); |
| y = ADD_LONG( y, args[2] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| x = ADD_LONG( x, args[3] ); |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| args += 4; |
| } |
| args = stack; |
| } |
| break; |
| |
| case cff_op_vhcurveto: |
| case cff_op_hvcurveto: |
| { |
| FT_Int phase; |
| FT_Int nargs; |
| |
| |
| FT_TRACE4(( "%s\n", op == cff_op_vhcurveto ? " vhcurveto" |
| : " hvcurveto" )); |
| |
| if ( cff_builder_start_point( builder, x, y ) ) |
| goto Fail; |
| |
| if ( num_args < 4 ) |
| goto Stack_Underflow; |
| |
| /* if num_args isn't of the form 8n, 8n+1, 8n+4, or 8n+5, */ |
| /* we enforce it by clearing the second bit */ |
| |
| nargs = num_args & ~2; |
| |
| args -= nargs; |
| if ( cff_check_points( builder, ( nargs / 4 ) * 3 ) ) |
| goto Stack_Underflow; |
| |
| phase = ( op == cff_op_hvcurveto ); |
| |
| while ( nargs >= 4 ) |
| { |
| nargs -= 4; |
| if ( phase ) |
| { |
| x = ADD_LONG( x, args[0] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| x = ADD_LONG( x, args[1] ); |
| y = ADD_LONG( y, args[2] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| y = ADD_LONG( y, args[3] ); |
| if ( nargs == 1 ) |
| x = ADD_LONG( x, args[4] ); |
| cff_builder_add_point( builder, x, y, 1 ); |
| } |
| else |
| { |
| y = ADD_LONG( y, args[0] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| x = ADD_LONG( x, args[1] ); |
| y = ADD_LONG( y, args[2] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| x = ADD_LONG( x, args[3] ); |
| if ( nargs == 1 ) |
| y = ADD_LONG( y, args[4] ); |
| cff_builder_add_point( builder, x, y, 1 ); |
| } |
| args += 4; |
| phase ^= 1; |
| } |
| args = stack; |
| } |
| break; |
| |
| case cff_op_rlinecurve: |
| { |
| FT_Int num_lines; |
| FT_Int nargs; |
| |
| |
| FT_TRACE4(( " rlinecurve\n" )); |
| |
| if ( num_args < 8 ) |
| goto Stack_Underflow; |
| |
| nargs = num_args & ~1; |
| num_lines = ( nargs - 6 ) / 2; |
| |
| if ( cff_builder_start_point( builder, x, y ) || |
| cff_check_points( builder, num_lines + 3 ) ) |
| goto Fail; |
| |
| args -= nargs; |
| |
| /* first, add the line segments */ |
| while ( num_lines > 0 ) |
| { |
| x = ADD_LONG( x, args[0] ); |
| y = ADD_LONG( y, args[1] ); |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| args += 2; |
| num_lines--; |
| } |
| |
| /* then the curve */ |
| x = ADD_LONG( x, args[0] ); |
| y = ADD_LONG( y, args[1] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| x = ADD_LONG( x, args[2] ); |
| y = ADD_LONG( y, args[3] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| x = ADD_LONG( x, args[4] ); |
| y = ADD_LONG( y, args[5] ); |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| args = stack; |
| } |
| break; |
| |
| case cff_op_rcurveline: |
| { |
| FT_Int num_curves; |
| FT_Int nargs; |
| |
| |
| FT_TRACE4(( " rcurveline\n" )); |
| |
| if ( num_args < 8 ) |
| goto Stack_Underflow; |
| |
| nargs = num_args - 2; |
| nargs = nargs - nargs % 6 + 2; |
| num_curves = ( nargs - 2 ) / 6; |
| |
| if ( cff_builder_start_point( builder, x, y ) || |
| cff_check_points( builder, num_curves * 3 + 2 ) ) |
| goto Fail; |
| |
| args -= nargs; |
| |
| /* first, add the curves */ |
| while ( num_curves > 0 ) |
| { |
| x = ADD_LONG( x, args[0] ); |
| y = ADD_LONG( y, args[1] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| x = ADD_LONG( x, args[2] ); |
| y = ADD_LONG( y, args[3] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| x = ADD_LONG( x, args[4] ); |
| y = ADD_LONG( y, args[5] ); |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| args += 6; |
| num_curves--; |
| } |
| |
| /* then the final line */ |
| x = ADD_LONG( x, args[0] ); |
| y = ADD_LONG( y, args[1] ); |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| args = stack; |
| } |
| break; |
| |
| case cff_op_hflex1: |
| { |
| FT_Pos start_y; |
| |
| |
| FT_TRACE4(( " hflex1\n" )); |
| |
| /* adding five more points: 4 control points, 1 on-curve point */ |
| /* -- make sure we have enough space for the start point if it */ |
| /* needs to be added */ |
| if ( cff_builder_start_point( builder, x, y ) || |
| cff_check_points( builder, 6 ) ) |
| goto Fail; |
| |
| /* record the starting point's y position for later use */ |
| start_y = y; |
| |
| /* first control point */ |
| x = ADD_LONG( x, args[0] ); |
| y = ADD_LONG( y, args[1] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* second control point */ |
| x = ADD_LONG( x, args[2] ); |
| y = ADD_LONG( y, args[3] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* join point; on curve, with y-value the same as the last */ |
| /* control point's y-value */ |
| x = ADD_LONG( x, args[4] ); |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| /* third control point, with y-value the same as the join */ |
| /* point's y-value */ |
| x = ADD_LONG( x, args[5] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* fourth control point */ |
| x = ADD_LONG( x, args[6] ); |
| y = ADD_LONG( y, args[7] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* ending point, with y-value the same as the start */ |
| x = ADD_LONG( x, args[8] ); |
| y = start_y; |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| args = stack; |
| break; |
| } |
| |
| case cff_op_hflex: |
| { |
| FT_Pos start_y; |
| |
| |
| FT_TRACE4(( " hflex\n" )); |
| |
| /* adding six more points; 4 control points, 2 on-curve points */ |
| if ( cff_builder_start_point( builder, x, y ) || |
| cff_check_points( builder, 6 ) ) |
| goto Fail; |
| |
| /* record the starting point's y-position for later use */ |
| start_y = y; |
| |
| /* first control point */ |
| x = ADD_LONG( x, args[0] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* second control point */ |
| x = ADD_LONG( x, args[1] ); |
| y = ADD_LONG( y, args[2] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* join point; on curve, with y-value the same as the last */ |
| /* control point's y-value */ |
| x = ADD_LONG( x, args[3] ); |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| /* third control point, with y-value the same as the join */ |
| /* point's y-value */ |
| x = ADD_LONG( x, args[4] ); |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* fourth control point */ |
| x = ADD_LONG( x, args[5] ); |
| y = start_y; |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* ending point, with y-value the same as the start point's */ |
| /* y-value -- we don't add this point, though */ |
| x = ADD_LONG( x, args[6] ); |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| args = stack; |
| break; |
| } |
| |
| case cff_op_flex1: |
| { |
| FT_Pos start_x, start_y; /* record start x, y values for */ |
| /* alter use */ |
| FT_Fixed dx = 0, dy = 0; /* used in horizontal/vertical */ |
| /* algorithm below */ |
| FT_Int horizontal, count; |
| FT_Fixed* temp; |
| |
| |
| FT_TRACE4(( " flex1\n" )); |
| |
| /* adding six more points; 4 control points, 2 on-curve points */ |
| if ( cff_builder_start_point( builder, x, y ) || |
| cff_check_points( builder, 6 ) ) |
| goto Fail; |
| |
| /* record the starting point's x, y position for later use */ |
| start_x = x; |
| start_y = y; |
| |
| /* XXX: figure out whether this is supposed to be a horizontal */ |
| /* or vertical flex; the Type 2 specification is vague... */ |
| |
| temp = args; |
| |
| /* grab up to the last argument */ |
| for ( count = 5; count > 0; count-- ) |
| { |
| dx = ADD_LONG( dx, temp[0] ); |
| dy = ADD_LONG( dy, temp[1] ); |
| temp += 2; |
| } |
| |
| if ( dx < 0 ) |
| dx = NEG_LONG( dx ); |
| if ( dy < 0 ) |
| dy = NEG_LONG( dy ); |
| |
| /* strange test, but here it is... */ |
| horizontal = ( dx > dy ); |
| |
| for ( count = 5; count > 0; count-- ) |
| { |
| x = ADD_LONG( x, args[0] ); |
| y = ADD_LONG( y, args[1] ); |
| cff_builder_add_point( builder, x, y, |
| FT_BOOL( count == 3 ) ); |
| args += 2; |
| } |
| |
| /* is last operand an x- or y-delta? */ |
| if ( horizontal ) |
| { |
| x = ADD_LONG( x, args[0] ); |
| y = start_y; |
| } |
| else |
| { |
| x = start_x; |
| y = ADD_LONG( y, args[0] ); |
| } |
| |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| args = stack; |
| break; |
| } |
| |
| case cff_op_flex: |
| { |
| FT_UInt count; |
| |
| |
| FT_TRACE4(( " flex\n" )); |
| |
| if ( cff_builder_start_point( builder, x, y ) || |
| cff_check_points( builder, 6 ) ) |
| goto Fail; |
| |
| for ( count = 6; count > 0; count-- ) |
| { |
| x = ADD_LONG( x, args[0] ); |
| y = ADD_LONG( y, args[1] ); |
| cff_builder_add_point( builder, x, y, |
| FT_BOOL( count == 4 || count == 1 ) ); |
| args += 2; |
| } |
| |
| args = stack; |
| } |
| break; |
| |
| case cff_op_seac: |
| FT_TRACE4(( " seac\n" )); |
| |
| error = cff_operator_seac( decoder, |
| args[0], args[1], args[2], |
| (FT_Int)( args[3] >> 16 ), |
| (FT_Int)( args[4] >> 16 ) ); |
| |
| /* add current outline to the glyph slot */ |
| FT_GlyphLoader_Add( builder->loader ); |
| |
| /* return now! */ |
| FT_TRACE4(( "\n" )); |
| return error; |
| |
| case cff_op_endchar: |
| /* in dictionaries, `endchar' simply indicates end of data */ |
| if ( in_dict ) |
| return error; |
| |
| FT_TRACE4(( " endchar\n" )); |
| |
| /* We are going to emulate the seac operator. */ |
| if ( num_args >= 4 ) |
| { |
| /* Save glyph width so that the subglyphs don't overwrite it. */ |
| FT_Pos glyph_width = decoder->glyph_width; |
| |
| |
| error = cff_operator_seac( decoder, |
| 0L, args[-4], args[-3], |
| (FT_Int)( args[-2] >> 16 ), |
| (FT_Int)( args[-1] >> 16 ) ); |
| |
| decoder->glyph_width = glyph_width; |
| } |
| else |
| { |
| cff_builder_close_contour( builder ); |
| |
| /* close hints recording session */ |
| if ( hinter ) |
| { |
| if ( hinter->close( hinter->hints, |
| (FT_UInt)builder->current->n_points ) ) |
| goto Syntax_Error; |
| |
| /* apply hints to the loaded glyph outline now */ |
| error = hinter->apply( hinter->hints, |
| builder->current, |
| (PSH_Globals)builder->hints_globals, |
| decoder->hint_mode ); |
| if ( error ) |
| goto Fail; |
| } |
| |
| /* add current outline to the glyph slot */ |
| FT_GlyphLoader_Add( builder->loader ); |
| } |
| |
| /* return now! */ |
| FT_TRACE4(( "\n" )); |
| return error; |
| |
| case cff_op_abs: |
| FT_TRACE4(( " abs\n" )); |
| |
| if ( args[0] < 0 ) |
| { |
| if ( args[0] == FT_LONG_MIN ) |
| args[0] = FT_LONG_MAX; |
| else |
| args[0] = -args[0]; |
| } |
| args++; |
| break; |
| |
| case cff_op_add: |
| FT_TRACE4(( " add\n" )); |
| |
| args[0] = ADD_LONG( args[0], args[1] ); |
| args++; |
| break; |
| |
| case cff_op_sub: |
| FT_TRACE4(( " sub\n" )); |
| |
| args[0] = SUB_LONG( args[0], args[1] ); |
| args++; |
| break; |
| |
| case cff_op_div: |
| FT_TRACE4(( " div\n" )); |
| |
| args[0] = FT_DivFix( args[0], args[1] ); |
| args++; |
| break; |
| |
| case cff_op_neg: |
| FT_TRACE4(( " neg\n" )); |
| |
| if ( args[0] == FT_LONG_MIN ) |
| args[0] = FT_LONG_MAX; |
| args[0] = -args[0]; |
| args++; |
| break; |
| |
| case cff_op_random: |
| { |
| FT_UInt32* randval = in_dict ? &decoder->cff->top_font.random |
| : &decoder->current_subfont->random; |
| |
| |
| FT_TRACE4(( " random\n" )); |
| |
| /* only use the lower 16 bits of `random' */ |
| /* to generate a number in the range (0;1] */ |
| args[0] = (FT_Fixed)( ( *randval & 0xFFFF ) + 1 ); |
| args++; |
| |
| *randval = cff_random( *randval ); |
| } |
| break; |
| |
| case cff_op_mul: |
| FT_TRACE4(( " mul\n" )); |
| |
| args[0] = FT_MulFix( args[0], args[1] ); |
| args++; |
| break; |
| |
| case cff_op_sqrt: |
| FT_TRACE4(( " sqrt\n" )); |
| |
| /* without upper limit the loop below might not finish */ |
| if ( args[0] > 0x7FFFFFFFL ) |
| args[0] = 46341; |
| else if ( args[0] > 0 ) |
| { |
| FT_Fixed root = args[0]; |
| FT_Fixed new_root; |
| |
| |
| for (;;) |
| { |
| new_root = ( root + FT_DivFix( args[0], root ) + 1 ) >> 1; |
| if ( new_root == root ) |
| break; |
| root = new_root; |
| } |
| args[0] = new_root; |
| } |
| else |
| args[0] = 0; |
| args++; |
| break; |
| |
| case cff_op_drop: |
| /* nothing */ |
| FT_TRACE4(( " drop\n" )); |
| |
| break; |
| |
| case cff_op_exch: |
| { |
| FT_Fixed tmp; |
| |
| |
| FT_TRACE4(( " exch\n" )); |
| |
| tmp = args[0]; |
| args[0] = args[1]; |
| args[1] = tmp; |
| args += 2; |
| } |
| break; |
| |
| case cff_op_index: |
| { |
| FT_Int idx = (FT_Int)( args[0] >> 16 ); |
| |
| |
| FT_TRACE4(( " index\n" )); |
| |
| if ( idx < 0 ) |
| idx = 0; |
| else if ( idx > num_args - 2 ) |
| idx = num_args - 2; |
| args[0] = args[-( idx + 1 )]; |
| args++; |
| } |
| break; |
| |
| case cff_op_roll: |
| { |
| FT_Int count = (FT_Int)( args[0] >> 16 ); |
| FT_Int idx = (FT_Int)( args[1] >> 16 ); |
| |
| |
| FT_TRACE4(( " roll\n" )); |
| |
| if ( count <= 0 ) |
| count = 1; |
| |
| args -= count; |
| if ( args < stack ) |
| goto Stack_Underflow; |
| |
| if ( idx >= 0 ) |
| { |
| idx = idx % count; |
| while ( idx > 0 ) |
| { |
| FT_Fixed tmp = args[count - 1]; |
| FT_Int i; |
| |
| |
| for ( i = count - 2; i >= 0; i-- ) |
| args[i + 1] = args[i]; |
| args[0] = tmp; |
| idx--; |
| } |
| } |
| else |
| { |
| /* before C99 it is implementation-defined whether */ |
| /* the result of `%' is negative if the first operand */ |
| /* is negative */ |
| idx = -( NEG_INT( idx ) % count ); |
| while ( idx < 0 ) |
| { |
| FT_Fixed tmp = args[0]; |
| FT_Int i; |
| |
| |
| for ( i = 0; i < count - 1; i++ ) |
| args[i] = args[i + 1]; |
| args[count - 1] = tmp; |
| idx++; |
| } |
| } |
| args += count; |
| } |
| break; |
| |
| case cff_op_dup: |
| FT_TRACE4(( " dup\n" )); |
| |
| args[1] = args[0]; |
| args += 2; |
| break; |
| |
| case cff_op_put: |
| { |
| FT_Fixed val = args[0]; |
| FT_UInt idx = (FT_UInt)( args[1] >> 16 ); |
| |
| |
| FT_TRACE4(( " put\n" )); |
| |
| /* the Type2 specification before version 16-March-2000 */ |
| /* didn't give a hard-coded size limit of the temporary */ |
| /* storage array; instead, an argument of the */ |
| /* `MultipleMaster' operator set the size */ |
| if ( idx < CFF_MAX_TRANS_ELEMENTS ) |
| decoder->buildchar[idx] = val; |
| } |
| break; |
| |
| case cff_op_get: |
| { |
| FT_UInt idx = (FT_UInt)( args[0] >> 16 ); |
| FT_Fixed val = 0; |
| |
| |
| FT_TRACE4(( " get\n" )); |
| |
| if ( idx < CFF_MAX_TRANS_ELEMENTS ) |
| val = decoder->buildchar[idx]; |
| |
| args[0] = val; |
| args++; |
| } |
| break; |
| |
| case cff_op_store: |
| /* this operator was removed from the Type2 specification */ |
| /* in version 16-March-2000 */ |
| |
| /* since we currently don't handle interpolation of multiple */ |
| /* master fonts, this is a no-op */ |
| FT_TRACE4(( " store\n" )); |
| break; |
| |
| case cff_op_load: |
| /* this operator was removed from the Type2 specification */ |
| /* in version 16-March-2000 */ |
| { |
| FT_UInt reg_idx = (FT_UInt)args[0]; |
| FT_UInt idx = (FT_UInt)args[1]; |
| FT_UInt count = (FT_UInt)args[2]; |
| |
| |
| FT_TRACE4(( " load\n" )); |
| |
| /* since we currently don't handle interpolation of multiple */ |
| /* master fonts, we store a vector [1 0 0 ...] in the */ |
| /* temporary storage array regardless of the Registry index */ |
| if ( reg_idx <= 2 && |
| idx < CFF_MAX_TRANS_ELEMENTS && |
| count <= num_axes ) |
| { |
| FT_UInt end, i; |
| |
| |
| end = FT_MIN( idx + count, CFF_MAX_TRANS_ELEMENTS ); |
| |
| if ( idx < end ) |
| decoder->buildchar[idx] = 1 << 16; |
| |
| for ( i = idx + 1; i < end; i++ ) |
| decoder->buildchar[i] = 0; |
| } |
| } |
| break; |
| |
| case cff_op_blend: |
| /* this operator was removed from the Type2 specification */ |
| /* in version 16-March-2000 */ |
| if ( num_designs ) |
| { |
| FT_Int num_results = (FT_Int)( args[0] >> 16 ); |
| |
| |
| FT_TRACE4(( " blend\n" )); |
| |
| if ( num_results < 0 ) |
| goto Syntax_Error; |
| |
| if ( num_results > num_args || |
| num_results * (FT_Int)num_designs > num_args ) |
| goto Stack_Underflow; |
| |
| /* since we currently don't handle interpolation of multiple */ |
| /* master fonts, return the `num_results' values of the */ |
| /* first master */ |
| args -= num_results * ( num_designs - 1 ); |
| num_args -= num_results * ( num_designs - 1 ); |
| } |
| else |
| goto Syntax_Error; |
| break; |
| |
| case cff_op_dotsection: |
| /* this operator is deprecated and ignored by the parser */ |
| FT_TRACE4(( " dotsection\n" )); |
| break; |
| |
| case cff_op_closepath: |
| /* this is an invalid Type 2 operator; however, there */ |
| /* exist fonts which are incorrectly converted from probably */ |
| /* Type 1 to CFF, and some parsers seem to accept it */ |
| |
| FT_TRACE4(( " closepath (invalid op)\n" )); |
| |
| args = stack; |
| break; |
| |
| case cff_op_hsbw: |
| /* this is an invalid Type 2 operator; however, there */ |
| /* exist fonts which are incorrectly converted from probably */ |
| /* Type 1 to CFF, and some parsers seem to accept it */ |
| |
| FT_TRACE4(( " hsbw (invalid op)\n" )); |
| |
| decoder->glyph_width = |
| ADD_LONG( decoder->nominal_width, ( args[1] >> 16 ) ); |
| |
| decoder->builder.left_bearing.x = args[0]; |
| decoder->builder.left_bearing.y = 0; |
| |
| x = ADD_LONG( decoder->builder.pos_x, args[0] ); |
| y = decoder->builder.pos_y; |
| args = stack; |
| break; |
| |
| case cff_op_sbw: |
| /* this is an invalid Type 2 operator; however, there */ |
| /* exist fonts which are incorrectly converted from probably */ |
| /* Type 1 to CFF, and some parsers seem to accept it */ |
| |
| FT_TRACE4(( " sbw (invalid op)\n" )); |
| |
| decoder->glyph_width = |
| ADD_LONG( decoder->nominal_width, ( args[2] >> 16 ) ); |
| |
| decoder->builder.left_bearing.x = args[0]; |
| decoder->builder.left_bearing.y = args[1]; |
| |
| x = ADD_LONG( decoder->builder.pos_x, args[0] ); |
| y = ADD_LONG( decoder->builder.pos_y, args[1] ); |
| args = stack; |
| break; |
| |
| case cff_op_setcurrentpoint: |
| /* this is an invalid Type 2 operator; however, there */ |
| /* exist fonts which are incorrectly converted from probably */ |
| /* Type 1 to CFF, and some parsers seem to accept it */ |
| |
| FT_TRACE4(( " setcurrentpoint (invalid op)\n" )); |
| |
| x = ADD_LONG( decoder->builder.pos_x, args[0] ); |
| y = ADD_LONG( decoder->builder.pos_y, args[1] ); |
| args = stack; |
| break; |
| |
| case cff_op_callothersubr: |
| { |
| FT_Fixed arg; |
| |
| |
| /* this is an invalid Type 2 operator; however, there */ |
| /* exist fonts which are incorrectly converted from */ |
| /* probably Type 1 to CFF, and some parsers seem to accept */ |
| /* it */ |
| |
| FT_TRACE4(( " callothersubr (invalid op)\n" )); |
| |
| /* subsequent `pop' operands should add the arguments, */ |
| /* this is the implementation described for `unknown' */ |
| /* other subroutines in the Type1 spec. */ |
| /* */ |
| /* XXX Fix return arguments (see discussion below). */ |
| |
| arg = 2 + ( args[-2] >> 16 ); |
| if ( arg >= CFF_MAX_OPERANDS ) |
| goto Stack_Underflow; |
| |
| args -= arg; |
| if ( args < stack ) |
| goto Stack_Underflow; |
| } |
| break; |
| |
| case cff_op_pop: |
| /* this is an invalid Type 2 operator; however, there */ |
| /* exist fonts which are incorrectly converted from probably */ |
| /* Type 1 to CFF, and some parsers seem to accept it */ |
| |
| FT_TRACE4(( " pop (invalid op)\n" )); |
| |
| /* XXX Increasing `args' is wrong: After a certain number of */ |
| /* `pop's we get a stack overflow. Reason for doing it is */ |
| /* code like this (actually found in a CFF font): */ |
| /* */ |
| /* 17 1 3 callothersubr */ |
| /* pop */ |
| /* callsubr */ |
| /* */ |
| /* Since we handle `callothersubr' as a no-op, and */ |
| /* `callsubr' needs at least one argument, `pop' can't be a */ |
| /* no-op too as it basically should be. */ |
| /* */ |
| /* The right solution would be to provide real support for */ |
| /* `callothersubr' as done in `t1decode.c', however, given */ |
| /* the fact that CFF fonts with `pop' are invalid, it is */ |
| /* questionable whether it is worth the time. */ |
| args++; |
| break; |
| |
| case cff_op_and: |
| { |
| FT_Fixed cond = ( args[0] && args[1] ); |
| |
| |
| FT_TRACE4(( " and\n" )); |
| |
| args[0] = cond ? 0x10000L : 0; |
| args++; |
| } |
| break; |
| |
| case cff_op_or: |
| { |
| FT_Fixed cond = ( args[0] || args[1] ); |
| |
| |
| FT_TRACE4(( " or\n" )); |
| |
| args[0] = cond ? 0x10000L : 0; |
| args++; |
| } |
| break; |
| |
| case cff_op_not: |
| { |
| FT_Fixed cond = !args[0]; |
| |
| |
| FT_TRACE4(( " not\n" )); |
| |
| args[0] = cond ? 0x10000L : 0; |
| args++; |
| } |
| break; |
| |
| case cff_op_eq: |
| { |
| FT_Fixed cond = ( args[0] == args[1] ); |
| |
| |
| FT_TRACE4(( " eq\n" )); |
| |
| args[0] = cond ? 0x10000L : 0; |
| args++; |
| } |
| break; |
| |
| case cff_op_ifelse: |
| { |
| FT_Fixed cond = ( args[2] <= args[3] ); |
| |
| |
| FT_TRACE4(( " ifelse\n" )); |
| |
| if ( !cond ) |
| args[0] = args[1]; |
| args++; |
| } |
| break; |
| |
| case cff_op_callsubr: |
| { |
| FT_UInt idx = (FT_UInt)( ( args[0] >> 16 ) + |
| decoder->locals_bias ); |
| |
| |
| FT_TRACE4(( " callsubr (idx %d, entering level %ld)\n", |
| idx, |
| zone - decoder->zones + 1 )); |
| |
| if ( idx >= decoder->num_locals ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" |
| " invalid local subr index\n" )); |
| goto Syntax_Error; |
| } |
| |
| if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" |
| " too many nested subrs\n" )); |
| goto Syntax_Error; |
| } |
| |
| zone->cursor = ip; /* save current instruction pointer */ |
| |
| zone++; |
| zone->base = decoder->locals[idx]; |
| zone->limit = decoder->locals[idx + 1]; |
| zone->cursor = zone->base; |
| |
| if ( !zone->base || zone->limit == zone->base ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" |
| " invoking empty subrs\n" )); |
| goto Syntax_Error; |
| } |
| |
| decoder->zone = zone; |
| ip = zone->base; |
| limit = zone->limit; |
| } |
| break; |
| |
| case cff_op_callgsubr: |
| { |
| FT_UInt idx = (FT_UInt)( ( args[0] >> 16 ) + |
| decoder->globals_bias ); |
| |
| |
| FT_TRACE4(( " callgsubr (idx %d, entering level %ld)\n", |
| idx, |
| zone - decoder->zones + 1 )); |
| |
| if ( idx >= decoder->num_globals ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" |
| " invalid global subr index\n" )); |
| goto Syntax_Error; |
| } |
| |
| if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" |
| " too many nested subrs\n" )); |
| goto Syntax_Error; |
| } |
| |
| zone->cursor = ip; /* save current instruction pointer */ |
| |
| zone++; |
| zone->base = decoder->globals[idx]; |
| zone->limit = decoder->globals[idx + 1]; |
| zone->cursor = zone->base; |
| |
| if ( !zone->base || zone->limit == zone->base ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" |
| " invoking empty subrs\n" )); |
| goto Syntax_Error; |
| } |
| |
| decoder->zone = zone; |
| ip = zone->base; |
| limit = zone->limit; |
| } |
| break; |
| |
| case cff_op_return: |
| FT_TRACE4(( " return (leaving level %ld)\n", |
| decoder->zone - decoder->zones )); |
| |
| if ( decoder->zone <= decoder->zones ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" |
| " unexpected return\n" )); |
| goto Syntax_Error; |
| } |
| |
| decoder->zone--; |
| zone = decoder->zone; |
| ip = zone->cursor; |
| limit = zone->limit; |
| break; |
| |
| default: |
| FT_ERROR(( "Unimplemented opcode: %d", ip[-1] )); |
| |
| if ( ip[-1] == 12 ) |
| FT_ERROR(( " %d", ip[0] )); |
| FT_ERROR(( "\n" )); |
| |
| return FT_THROW( Unimplemented_Feature ); |
| } |
| |
| decoder->top = args; |
| |
| if ( decoder->top - stack >= CFF_MAX_OPERANDS ) |
| goto Stack_Overflow; |
| |
| } /* general operator processing */ |
| |
| } /* while ip < limit */ |
| |
| FT_TRACE4(( "..end..\n" )); |
| FT_TRACE4(( "\n" )); |
| |
| Fail: |
| return error; |
| |
| MM_Error: |
| FT_TRACE4(( "cff_decoder_parse_charstrings:" |
| " invalid opcode found in top DICT charstring\n")); |
| return FT_THROW( Invalid_File_Format ); |
| |
| Syntax_Error: |
| FT_TRACE4(( "cff_decoder_parse_charstrings: syntax error\n" )); |
| return FT_THROW( Invalid_File_Format ); |
| |
| Stack_Underflow: |
| FT_TRACE4(( "cff_decoder_parse_charstrings: stack underflow\n" )); |
| return FT_THROW( Too_Few_Arguments ); |
| |
| Stack_Overflow: |
| FT_TRACE4(( "cff_decoder_parse_charstrings: stack overflow\n" )); |
| return FT_THROW( Stack_Overflow ); |
| } |
| |
| #endif /* CFF_CONFIG_OPTION_OLD_ENGINE */ |
| |
| |
| /************************************************************************** |
| * |
| * @Function: |
| * cff_decoder_init |
| * |
| * @Description: |
| * Initializes a given glyph decoder. |
| * |
| * @InOut: |
| * decoder :: |
| * A pointer to the glyph builder to initialize. |
| * |
| * @Input: |
| * face :: |
| * The current face object. |
| * |
| * size :: |
| * The current size object. |
| * |
| * slot :: |
| * The current glyph object. |
| * |
| * hinting :: |
| * Whether hinting is active. |
| * |
| * hint_mode :: |
| * The hinting mode. |
| */ |
| FT_LOCAL_DEF( void ) |
| cff_decoder_init( CFF_Decoder* decoder, |
| TT_Face face, |
| CFF_Size size, |
| CFF_GlyphSlot slot, |
| FT_Bool hinting, |
| FT_Render_Mode hint_mode, |
| CFF_Decoder_Get_Glyph_Callback get_callback, |
| CFF_Decoder_Free_Glyph_Callback free_callback ) |
| { |
| CFF_Font cff = (CFF_Font)face->extra.data; |
| |
| |
| /* clear everything */ |
| FT_ZERO( decoder ); |
| |
| /* initialize builder */ |
| cff_builder_init( &decoder->builder, face, size, slot, hinting ); |
| |
| /* initialize Type2 decoder */ |
| decoder->cff = cff; |
| decoder->num_globals = cff->global_subrs_index.count; |
| decoder->globals = cff->global_subrs; |
| decoder->globals_bias = cff_compute_bias( |
| cff->top_font.font_dict.charstring_type, |
| decoder->num_globals ); |
| |
| decoder->hint_mode = hint_mode; |
| |
| decoder->get_glyph_callback = get_callback; |
| decoder->free_glyph_callback = free_callback; |
| } |
| |
| |
| /* this function is used to select the subfont */ |
| /* and the locals subrs array */ |
| FT_LOCAL_DEF( FT_Error ) |
| cff_decoder_prepare( CFF_Decoder* decoder, |
| CFF_Size size, |
| FT_UInt glyph_index ) |
| { |
| CFF_Builder *builder = &decoder->builder; |
| CFF_Font cff = (CFF_Font)builder->face->extra.data; |
| CFF_SubFont sub = &cff->top_font; |
| FT_Error error = FT_Err_Ok; |
| |
| FT_Service_CFFLoad cffload = (FT_Service_CFFLoad)cff->cffload; |
| |
| |
| /* manage CID fonts */ |
| if ( cff->num_subfonts ) |
| { |
| FT_Byte fd_index = cffload->fd_select_get( &cff->fd_select, |
| glyph_index ); |
| |
| |
| if ( fd_index >= cff->num_subfonts ) |
| { |
| FT_TRACE4(( "cff_decoder_prepare: invalid CID subfont index\n" )); |
| error = FT_THROW( Invalid_File_Format ); |
| goto Exit; |
| } |
| |
| FT_TRACE3(( " in subfont %d:\n", fd_index )); |
| |
| sub = cff->subfonts[fd_index]; |
| |
| if ( builder->hints_funcs && size ) |
| { |
| FT_Size ftsize = FT_SIZE( size ); |
| CFF_Internal internal = (CFF_Internal)ftsize->internal->module_data; |
| |
| |
| /* for CFFs without subfonts, this value has already been set */ |
| builder->hints_globals = (void *)internal->subfonts[fd_index]; |
| } |
| } |
| |
| decoder->num_locals = sub->local_subrs_index.count; |
| decoder->locals = sub->local_subrs; |
| decoder->locals_bias = cff_compute_bias( |
| decoder->cff->top_font.font_dict.charstring_type, |
| decoder->num_locals ); |
| |
| decoder->glyph_width = sub->private_dict.default_width; |
| decoder->nominal_width = sub->private_dict.nominal_width; |
| |
| decoder->current_subfont = sub; |
| |
| Exit: |
| return error; |
| } |
| |
| |
| /* END */ |