blob: afdef05a89d2c37380f96137b03c8ef91fd98627 [file] [log] [blame]
/****************************************************************************
*
* gxvmorx5.c
*
* TrueTypeGX/AAT morx table validation
* body for type5 (Contextual Glyph Insertion) subtable.
*
* Copyright (C) 2005-2022 by
* suzuki toshiya, Masatake YAMATO, Red Hat K.K.,
* David Turner, Robert Wilhelm, and Werner Lemberg.
*
* This file is part of the FreeType project, and may only be used,
* modified, and distributed under the terms of the FreeType project
* license, LICENSE.TXT. By continuing to use, modify, or distribute
* this file you indicate that you have read the license and
* understand and accept it fully.
*
*/
/****************************************************************************
*
* gxvalid is derived from both gxlayout module and otvalid module.
* Development of gxlayout is supported by the Information-technology
* Promotion Agency(IPA), Japan.
*
*/
#include "gxvmorx.h"
/**************************************************************************
*
* The macro FT_COMPONENT is used in trace mode. It is an implicit
* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log
* messages during execution.
*/
#undef FT_COMPONENT
#define FT_COMPONENT gxvmorx
/*
* `morx' subtable type5 (Contextual Glyph Insertion)
* has format of a StateTable with insertion-glyph-list
* without name. However, the 32bit offset from the head
* of subtable to the i-g-l is given after `entryTable',
* without variable name specification (the existence of
* this offset to the table is different from mort type5).
*/
typedef struct GXV_morx_subtable_type5_StateOptRec_
{
FT_ULong insertionGlyphList;
FT_ULong insertionGlyphList_length;
} GXV_morx_subtable_type5_StateOptRec,
*GXV_morx_subtable_type5_StateOptRecData;
#define GXV_MORX_SUBTABLE_TYPE5_HEADER_SIZE \
( GXV_STATETABLE_HEADER_SIZE + 4 )
static void
gxv_morx_subtable_type5_insertionGlyphList_load( FT_Bytes table,
FT_Bytes limit,
GXV_Validator gxvalid )
{
FT_Bytes p = table;
GXV_morx_subtable_type5_StateOptRecData optdata =
(GXV_morx_subtable_type5_StateOptRecData)gxvalid->xstatetable.optdata;
GXV_LIMIT_CHECK( 4 );
optdata->insertionGlyphList = FT_NEXT_ULONG( p );
}
static void
gxv_morx_subtable_type5_subtable_setup( FT_ULong table_size,
FT_ULong classTable,
FT_ULong stateArray,
FT_ULong entryTable,
FT_ULong* classTable_length_p,
FT_ULong* stateArray_length_p,
FT_ULong* entryTable_length_p,
GXV_Validator gxvalid )
{
FT_ULong o[4];
FT_ULong* l[4];
FT_ULong buff[5];
GXV_morx_subtable_type5_StateOptRecData optdata =
(GXV_morx_subtable_type5_StateOptRecData)gxvalid->xstatetable.optdata;
o[0] = classTable;
o[1] = stateArray;
o[2] = entryTable;
o[3] = optdata->insertionGlyphList;
l[0] = classTable_length_p;
l[1] = stateArray_length_p;
l[2] = entryTable_length_p;
l[3] = &(optdata->insertionGlyphList_length);
gxv_set_length_by_ulong_offset( o, l, buff, 4, table_size, gxvalid );
}
static void
gxv_morx_subtable_type5_InsertList_validate( FT_UShort table_index,
FT_UShort count,
FT_Bytes table,
FT_Bytes limit,
GXV_Validator gxvalid )
{
FT_Bytes p = table + table_index * 2;
#ifndef GXV_LOAD_TRACE_VARS
GXV_LIMIT_CHECK( count * 2 );
#else
while ( p < table + count * 2 + table_index * 2 )
{
FT_UShort insert_glyphID;
GXV_LIMIT_CHECK( 2 );
insert_glyphID = FT_NEXT_USHORT( p );
GXV_TRACE(( " 0x%04x", insert_glyphID ));
}
GXV_TRACE(( "\n" ));
#endif
}
static void
gxv_morx_subtable_type5_entry_validate(
FT_UShort state,
FT_UShort flags,
GXV_StateTable_GlyphOffsetCPtr glyphOffset_p,
FT_Bytes table,
FT_Bytes limit,
GXV_Validator gxvalid )
{
#ifdef GXV_LOAD_UNUSED_VARS
FT_Bool setMark;
FT_Bool dontAdvance;
FT_Bool currentIsKashidaLike;
FT_Bool markedIsKashidaLike;
FT_Bool currentInsertBefore;
FT_Bool markedInsertBefore;
#endif
FT_Byte currentInsertCount;
FT_Byte markedInsertCount;
FT_Byte currentInsertList;
FT_UShort markedInsertList;
FT_UNUSED( state );
#ifdef GXV_LOAD_UNUSED_VARS
setMark = FT_BOOL( ( flags >> 15 ) & 1 );
dontAdvance = FT_BOOL( ( flags >> 14 ) & 1 );
currentIsKashidaLike = FT_BOOL( ( flags >> 13 ) & 1 );
markedIsKashidaLike = FT_BOOL( ( flags >> 12 ) & 1 );
currentInsertBefore = FT_BOOL( ( flags >> 11 ) & 1 );
markedInsertBefore = FT_BOOL( ( flags >> 10 ) & 1 );
#endif
currentInsertCount = (FT_Byte)( ( flags >> 5 ) & 0x1F );
markedInsertCount = (FT_Byte)( flags & 0x001F );
currentInsertList = (FT_Byte) ( glyphOffset_p->ul >> 16 );
markedInsertList = (FT_UShort)( glyphOffset_p->ul );
if ( currentInsertList && 0 != currentInsertCount )
gxv_morx_subtable_type5_InsertList_validate( currentInsertList,
currentInsertCount,
table, limit,
gxvalid );
if ( markedInsertList && 0 != markedInsertCount )
gxv_morx_subtable_type5_InsertList_validate( markedInsertList,
markedInsertCount,
table, limit,
gxvalid );
}
FT_LOCAL_DEF( void )
gxv_morx_subtable_type5_validate( FT_Bytes table,
FT_Bytes limit,
GXV_Validator gxvalid )
{
FT_Bytes p = table;
GXV_morx_subtable_type5_StateOptRec et_rec;
GXV_morx_subtable_type5_StateOptRecData et = &et_rec;
GXV_NAME_ENTER( "morx chain subtable type5 (Glyph Insertion)" );
GXV_LIMIT_CHECK( GXV_MORX_SUBTABLE_TYPE5_HEADER_SIZE );
gxvalid->xstatetable.optdata =
et;
gxvalid->xstatetable.optdata_load_func =
gxv_morx_subtable_type5_insertionGlyphList_load;
gxvalid->xstatetable.subtable_setup_func =
gxv_morx_subtable_type5_subtable_setup;
gxvalid->xstatetable.entry_glyphoffset_fmt =
GXV_GLYPHOFFSET_ULONG;
gxvalid->xstatetable.entry_validate_func =
gxv_morx_subtable_type5_entry_validate;
gxv_XStateTable_validate( p, limit, gxvalid );
GXV_EXIT;
}
/* END */