| /* timepng.c |
| * |
| * Copyright (c) 2013,2016 John Cunningham Bowler |
| * |
| * Last changed in libpng 1.6.22 [May 26, 2016] |
| * |
| * This code is released under the libpng license. |
| * For conditions of distribution and use, see the disclaimer |
| * and license in png.h |
| * |
| * Load an arbitrary number of PNG files (from the command line, or, if there |
| * are no arguments on the command line, from stdin) then run a time test by |
| * reading each file by row or by image (possibly with transforms in the latter |
| * case). The only output is a time as a floating point number of seconds with |
| * 9 decimal digits. |
| */ |
| #define _POSIX_C_SOURCE 199309L /* for clock_gettime */ |
| |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include <errno.h> |
| #include <limits.h> |
| |
| #include <time.h> |
| |
| #if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) |
| # include <config.h> |
| #endif |
| |
| /* Define the following to use this test against your installed libpng, rather |
| * than the one being built here: |
| */ |
| #ifdef PNG_FREESTANDING_TESTS |
| # include <png.h> |
| #else |
| # include "../../png.h" |
| #endif |
| |
| /* The following is to support direct compilation of this file as C++ */ |
| #ifdef __cplusplus |
| # define voidcast(type, value) static_cast<type>(value) |
| #else |
| # define voidcast(type, value) (value) |
| #endif /* __cplusplus */ |
| |
| /* 'CLOCK_PROCESS_CPUTIME_ID' is one of the clock timers for clock_gettime. It |
| * need not be supported even when clock_gettime is available. It returns the |
| * 'CPU' time the process has consumed. 'CPU' time is assumed to include time |
| * when the CPU is actually blocked by a pending cache fill but not time |
| * waiting for page faults. The attempt is to get a measure of the actual time |
| * the implementation takes to read a PNG ignoring the potentially very large IO |
| * overhead. |
| */ |
| #if defined (CLOCK_PROCESS_CPUTIME_ID) && defined(PNG_STDIO_SUPPORTED) &&\ |
| defined(PNG_EASY_ACCESS_SUPPORTED) &&\ |
| (PNG_LIBPNG_VER >= 10700 ? defined(PNG_READ_PNG_SUPPORTED) :\ |
| defined (PNG_SEQUENTIAL_READ_SUPPORTED) &&\ |
| defined(PNG_INFO_IMAGE_SUPPORTED)) |
| |
| typedef struct |
| { |
| FILE *input; |
| FILE *output; |
| } io_data; |
| |
| static PNG_CALLBACK(void, read_and_copy, |
| (png_structp png_ptr, png_bytep buffer, png_size_t cb)) |
| { |
| io_data *io = (io_data*)png_get_io_ptr(png_ptr); |
| |
| if (fread(buffer, cb, 1, io->input) != 1) |
| png_error(png_ptr, strerror(errno)); |
| |
| if (fwrite(buffer, cb, 1, io->output) != 1) |
| { |
| perror("temporary file"); |
| fprintf(stderr, "temporary file PNG write failed\n"); |
| exit(1); |
| } |
| } |
| |
| static void read_by_row(png_structp png_ptr, png_infop info_ptr, |
| FILE *write_ptr, FILE *read_ptr) |
| { |
| /* These don't get freed on error, this is fine; the program immediately |
| * exits. |
| */ |
| png_bytep row = NULL, display = NULL; |
| io_data io_copy; |
| |
| if (write_ptr != NULL) |
| { |
| /* Set up for a copy to the temporary file: */ |
| io_copy.input = read_ptr; |
| io_copy.output = write_ptr; |
| png_set_read_fn(png_ptr, &io_copy, read_and_copy); |
| } |
| |
| png_read_info(png_ptr, info_ptr); |
| |
| { |
| png_size_t rowbytes = png_get_rowbytes(png_ptr, info_ptr); |
| |
| row = voidcast(png_bytep,malloc(rowbytes)); |
| display = voidcast(png_bytep,malloc(rowbytes)); |
| |
| if (row == NULL || display == NULL) |
| png_error(png_ptr, "OOM allocating row buffers"); |
| |
| { |
| png_uint_32 height = png_get_image_height(png_ptr, info_ptr); |
| int passes = png_set_interlace_handling(png_ptr); |
| int pass; |
| |
| png_start_read_image(png_ptr); |
| |
| for (pass = 0; pass < passes; ++pass) |
| { |
| png_uint_32 y = height; |
| |
| /* NOTE: this trashes the row each time; interlace handling won't |
| * work, but this avoids memory thrashing for speed testing and is |
| * somewhat representative of an application that works row-by-row. |
| */ |
| while (y-- > 0) |
| png_read_row(png_ptr, row, display); |
| } |
| } |
| } |
| |
| /* Make sure to read to the end of the file: */ |
| png_read_end(png_ptr, info_ptr); |
| |
| /* Free this up: */ |
| free(row); |
| free(display); |
| } |
| |
| static PNG_CALLBACK(void, no_warnings, (png_structp png_ptr, |
| png_const_charp warning)) |
| { |
| (void)png_ptr; |
| (void)warning; |
| } |
| |
| static int read_png(FILE *fp, png_int_32 transforms, FILE *write_file) |
| { |
| png_structp png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING,0,0, |
| no_warnings); |
| png_infop info_ptr = NULL; |
| |
| if (png_ptr == NULL) |
| return 0; |
| |
| if (setjmp(png_jmpbuf(png_ptr))) |
| { |
| png_destroy_read_struct(&png_ptr, &info_ptr, NULL); |
| return 0; |
| } |
| |
| # ifdef PNG_BENIGN_ERRORS_SUPPORTED |
| png_set_benign_errors(png_ptr, 1/*allowed*/); |
| # endif |
| png_init_io(png_ptr, fp); |
| |
| info_ptr = png_create_info_struct(png_ptr); |
| |
| if (info_ptr == NULL) |
| png_error(png_ptr, "OOM allocating info structure"); |
| |
| if (transforms < 0) |
| read_by_row(png_ptr, info_ptr, write_file, fp); |
| |
| else |
| png_read_png(png_ptr, info_ptr, transforms, NULL/*params*/); |
| |
| png_destroy_read_struct(&png_ptr, &info_ptr, NULL); |
| return 1; |
| } |
| |
| static int mytime(struct timespec *t) |
| { |
| /* Do the timing using clock_gettime and the per-process timer. */ |
| if (!clock_gettime(CLOCK_PROCESS_CPUTIME_ID, t)) |
| return 1; |
| |
| perror("CLOCK_PROCESS_CPUTIME_ID"); |
| fprintf(stderr, "timepng: could not get the time\n"); |
| return 0; |
| } |
| |
| static int perform_one_test(FILE *fp, int nfiles, png_int_32 transforms) |
| { |
| int i; |
| struct timespec before, after; |
| |
| /* Clear out all errors: */ |
| rewind(fp); |
| |
| if (mytime(&before)) |
| { |
| for (i=0; i<nfiles; ++i) |
| { |
| if (read_png(fp, transforms, NULL/*write*/)) |
| { |
| if (ferror(fp)) |
| { |
| perror("temporary file"); |
| fprintf(stderr, "file %d: error reading PNG data\n", i); |
| return 0; |
| } |
| } |
| |
| else |
| { |
| perror("temporary file"); |
| fprintf(stderr, "file %d: error from libpng\n", i); |
| return 0; |
| } |
| } |
| } |
| |
| else |
| return 0; |
| |
| if (mytime(&after)) |
| { |
| /* Work out the time difference and print it - this is the only output, |
| * so flush it immediately. |
| */ |
| unsigned long s = after.tv_sec - before.tv_sec; |
| long ns = after.tv_nsec - before.tv_nsec; |
| |
| if (ns < 0) |
| { |
| --s; |
| ns += 1000000000; |
| |
| if (ns < 0) |
| { |
| fprintf(stderr, "timepng: bad clock from kernel\n"); |
| return 0; |
| } |
| } |
| |
| printf("%lu.%.9ld\n", s, ns); |
| fflush(stdout); |
| if (ferror(stdout)) |
| { |
| fprintf(stderr, "timepng: error writing output\n"); |
| return 0; |
| } |
| |
| /* Successful return */ |
| return 1; |
| } |
| |
| else |
| return 0; |
| } |
| |
| static int add_one_file(FILE *fp, char *name) |
| { |
| FILE *ip = fopen(name, "rb"); |
| |
| if (ip != NULL) |
| { |
| /* Read the file using libpng; this detects errors and also deals with |
| * files which contain data beyond the end of the file. |
| */ |
| int ok = 0; |
| fpos_t pos; |
| |
| if (fgetpos(fp, &pos)) |
| { |
| /* Fatal error reading the start: */ |
| perror("temporary file"); |
| fprintf(stderr, "temporary file fgetpos error\n"); |
| exit(1); |
| } |
| |
| if (read_png(ip, -1/*by row*/, fp/*output*/)) |
| { |
| if (ferror(ip)) |
| { |
| perror(name); |
| fprintf(stderr, "%s: read error\n", name); |
| } |
| |
| else |
| ok = 1; /* read ok */ |
| } |
| |
| else |
| fprintf(stderr, "%s: file not added\n", name); |
| |
| (void)fclose(ip); |
| |
| /* An error in the output is fatal; exit immediately: */ |
| if (ferror(fp)) |
| { |
| perror("temporary file"); |
| fprintf(stderr, "temporary file write error\n"); |
| exit(1); |
| } |
| |
| if (ok) |
| return 1; |
| |
| /* Did not read the file successfully, simply rewind the temporary |
| * file. This must happen after the ferror check above to avoid clearing |
| * the error. |
| */ |
| if (fsetpos(fp, &pos)) |
| { |
| perror("temporary file"); |
| fprintf(stderr, "temporary file fsetpos error\n"); |
| exit(1); |
| } |
| } |
| |
| else |
| { |
| /* file open error: */ |
| perror(name); |
| fprintf(stderr, "%s: open failed\n", name); |
| } |
| |
| return 0; /* file not added */ |
| } |
| |
| static void |
| usage(FILE *fp) |
| { |
| if (fp != NULL) fclose(fp); |
| |
| fprintf(stderr, |
| "Usage:\n" |
| " timepng --assemble <assembly> {files}\n" |
| " Read the files into <assembly>, output the count. Options are ignored.\n" |
| " timepng --dissemble <assembly> <count> [options]\n" |
| " Time <count> files from <assembly>, additional files may not be given.\n" |
| " Otherwise:\n" |
| " Read the files into a temporary file and time the decode\n" |
| "Transforms:\n" |
| " --by-image: read by image with png_read_png\n" |
| " --<transform>: implies by-image, use PNG_TRANSFORM_<transform>\n" |
| " Otherwise: read by row using png_read_row (to a single row buffer)\n" |
| /* ISO C90 string length max 509 */);fprintf(stderr, |
| "{files}:\n" |
| " PNG files to copy into the assembly and time. Invalid files are skipped\n" |
| " with appropriate error messages. If no files are given the list of files\n" |
| " is read from stdin with each file name terminated by a newline\n" |
| "Output:\n" |
| " For --assemble the output is the name of the assembly file followed by the\n" |
| " count of the files it contains; the arguments for --dissemble. Otherwise\n" |
| " the output is the total decode time in seconds.\n"); |
| |
| exit(99); |
| } |
| |
| int main(int argc, char **argv) |
| { |
| int ok = 0; |
| int err = 0; |
| int nfiles = 0; |
| int transforms = -1; /* by row */ |
| const char *assembly = NULL; |
| FILE *fp; |
| |
| if (argc > 2 && strcmp(argv[1], "--assemble") == 0) |
| { |
| /* Just build the test file, argv[2] is the file name. */ |
| assembly = argv[2]; |
| fp = fopen(assembly, "wb"); |
| if (fp == NULL) |
| { |
| perror(assembly); |
| fprintf(stderr, "timepng --assemble %s: could not open for write\n", |
| assembly); |
| usage(NULL); |
| } |
| |
| argv += 2; |
| argc -= 2; |
| } |
| |
| else if (argc > 3 && strcmp(argv[1], "--dissemble") == 0) |
| { |
| fp = fopen(argv[2], "rb"); |
| |
| if (fp == NULL) |
| { |
| perror(argv[2]); |
| fprintf(stderr, "timepng --dissemble %s: could not open for read\n", |
| argv[2]); |
| usage(NULL); |
| } |
| |
| nfiles = atoi(argv[3]); |
| if (nfiles <= 0) |
| { |
| fprintf(stderr, |
| "timepng --dissemble <file> <count>: %s is not a count\n", |
| argv[3]); |
| exit(99); |
| } |
| #ifdef __COVERITY__ |
| else |
| { |
| nfiles &= PNG_UINT_31_MAX; |
| } |
| #endif |
| |
| argv += 3; |
| argc -= 3; |
| } |
| |
| else /* Else use a temporary file */ |
| { |
| #ifndef __COVERITY__ |
| fp = tmpfile(); |
| #else |
| /* Experimental. Coverity says tmpfile() is insecure because it |
| * generates predictable names. |
| * |
| * It is possible to satisfy Coverity by using mkstemp(); however, |
| * any platform supporting mkstemp() undoubtedly has a secure tmpfile() |
| * implementation as well, and doesn't need the fix. Note that |
| * the fix won't work on platforms that don't support mkstemp(). |
| * |
| * https://www.securecoding.cert.org/confluence/display/c/ |
| * FIO21-C.+Do+not+create+temporary+files+in+shared+directories |
| * says that most historic implementations of tmpfile() provide |
| * only a limited number of possible temporary file names |
| * (usually 26) before file names are recycled. That article also |
| * provides a secure solution that unfortunately depends upon mkstemp(). |
| */ |
| char tmpfile[] = "timepng-XXXXXX"; |
| int filedes; |
| umask(0177); |
| filedes = mkstemp(tmpfile); |
| if (filedes < 0) |
| fp = NULL; |
| else |
| { |
| fp = fdopen(filedes,"w+"); |
| /* Hide the filename immediately and ensure that the file does |
| * not exist after the program ends |
| */ |
| (void) unlink(tmpfile); |
| } |
| #endif |
| |
| if (fp == NULL) |
| { |
| perror("tmpfile"); |
| fprintf(stderr, "timepng: could not open the temporary file\n"); |
| exit(1); /* not a user error */ |
| } |
| } |
| |
| /* Handle the transforms: */ |
| while (argc > 1 && argv[1][0] == '-' && argv[1][1] == '-') |
| { |
| const char *opt = *++argv + 2; |
| |
| --argc; |
| |
| /* Transforms turn on the by-image processing and maybe set some |
| * transforms: |
| */ |
| if (transforms == -1) |
| transforms = PNG_TRANSFORM_IDENTITY; |
| |
| if (strcmp(opt, "by-image") == 0) |
| { |
| /* handled above */ |
| } |
| |
| # define OPT(name) else if (strcmp(opt, #name) == 0)\ |
| transforms |= PNG_TRANSFORM_ ## name |
| |
| OPT(STRIP_16); |
| OPT(STRIP_ALPHA); |
| OPT(PACKING); |
| OPT(PACKSWAP); |
| OPT(EXPAND); |
| OPT(INVERT_MONO); |
| OPT(SHIFT); |
| OPT(BGR); |
| OPT(SWAP_ALPHA); |
| OPT(SWAP_ENDIAN); |
| OPT(INVERT_ALPHA); |
| OPT(STRIP_FILLER); |
| OPT(STRIP_FILLER_BEFORE); |
| OPT(STRIP_FILLER_AFTER); |
| OPT(GRAY_TO_RGB); |
| OPT(EXPAND_16); |
| OPT(SCALE_16); |
| |
| else |
| { |
| fprintf(stderr, "timepng %s: unrecognized transform\n", opt); |
| usage(fp); |
| } |
| } |
| |
| /* Handle the files: */ |
| if (argc > 1 && nfiles > 0) |
| usage(fp); /* Additional files not valid with --dissemble */ |
| |
| else if (argc > 1) |
| { |
| int i; |
| |
| for (i=1; i<argc; ++i) |
| { |
| if (nfiles == INT_MAX) |
| { |
| fprintf(stderr, "%s: skipped, too many files\n", argv[i]); |
| break; |
| } |
| |
| else if (add_one_file(fp, argv[i])) |
| ++nfiles; |
| } |
| } |
| |
| else if (nfiles == 0) /* Read from stdin withoout --dissemble */ |
| { |
| char filename[FILENAME_MAX+1]; |
| |
| while (fgets(filename, FILENAME_MAX+1, stdin)) |
| { |
| size_t len = strlen(filename); |
| |
| if (filename[len-1] == '\n') |
| { |
| filename[len-1] = 0; |
| if (nfiles == INT_MAX) |
| { |
| fprintf(stderr, "%s: skipped, too many files\n", filename); |
| break; |
| } |
| |
| else if (add_one_file(fp, filename)) |
| ++nfiles; |
| } |
| |
| else |
| { |
| fprintf(stderr, "timepng: file name too long: ...%s\n", |
| filename+len-32); |
| err = 1; |
| break; |
| } |
| } |
| |
| if (ferror(stdin)) |
| { |
| fprintf(stderr, "timepng: stdin: read error\n"); |
| err = 1; |
| } |
| } |
| |
| /* Perform the test, or produce the --assemble output: */ |
| if (!err) |
| { |
| if (nfiles > 0) |
| { |
| if (assembly != NULL) |
| { |
| if (fflush(fp) && !ferror(fp) && fclose(fp)) |
| { |
| perror(assembly); |
| fprintf(stderr, "%s: close failed\n", assembly); |
| } |
| |
| else |
| { |
| printf("%s %d\n", assembly, nfiles); |
| fflush(stdout); |
| ok = !ferror(stdout); |
| } |
| } |
| |
| else |
| { |
| ok = perform_one_test(fp, nfiles, transforms); |
| (void)fclose(fp); |
| } |
| } |
| |
| else |
| usage(fp); |
| } |
| |
| else |
| (void)fclose(fp); |
| |
| /* Exit code 0 on success. */ |
| return ok == 0; |
| } |
| #else /* !sufficient support */ |
| int main(void) { return 77; } |
| #endif /* !sufficient support */ |