lib/zip_algorithm_xz.c - third_party/libzip - Git at Google

 /*
   zip_algorithm_xz.c -- LZMA/XZ (de)compression routines
   Bazed on zip_algorithm_deflate.c -- deflate (de)compression routines
   Copyright (C) 2017-2020 Dieter Baron and Thomas Klausner

   This file is part of libzip, a library to manipulate ZIP archives.
   The authors can be contacted at <libzip@nih.at>

   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions
   are met:
   1. Redistributions of source code must retain the above copyright
      notice, this list of conditions and the following disclaimer.
   2. Redistributions in binary form must reproduce the above copyright
      notice, this list of conditions and the following disclaimer in
      the documentation and/or other materials provided with the
      distribution.
   3. The names of the authors may not be used to endorse or promote
      products derived from this software without specific prior
      written permission.

   THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS
   OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
   GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
   IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
   OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
   IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

 #include "zipint.h"

 #include <limits.h>
 #include <lzma.h>
 #include <stdlib.h>
 #include <zlib.h>

 enum header_state { INCOMPLETE, OUTPUT, DONE };

 #define HEADER_BYTES_ZIP 9
 #define HEADER_MAGIC_LENGTH 4
 #define HEADER_MAGIC1_OFFSET 0
 #define HEADER_MAGIC2_OFFSET 2
 #define HEADER_SIZE_OFFSET 9
 #define HEADER_SIZE_LENGTH 8
 #define HEADER_PARAMETERS_LENGTH 5
 #define HEADER_LZMA_ALONE_LENGTH (HEADER_PARAMETERS_LENGTH + HEADER_SIZE_LENGTH)

 struct ctx {
     zip_error_t *error;
     bool compress;
     zip_uint32_t compression_flags;
     bool end_of_input;
     lzma_stream zstr;
     zip_uint16_t method;
     /* header member is used for converting from zip to "lzma alone"
      * format
      *
      * "lzma alone" file format starts with:
      * 5 bytes lzma parameters
      * 8 bytes uncompressed size
      * compressed data
      *
      * zip archive on-disk format starts with
      * 4 bytes magic (first two bytes vary, e.g. 0x0914 or 0x1002, next bytes are 0x0500)
      * 5 bytes lzma parameters
      * compressed data
      *
      * we read the data into a header of the form
      * 4 bytes magic
      * 5 bytes lzma parameters
      * 8 bytes uncompressed size
      */
     zip_uint8_t header[HEADER_MAGIC_LENGTH + HEADER_LZMA_ALONE_LENGTH];
     zip_uint8_t header_bytes_offset;
     enum header_state header_state;
     zip_uint64_t uncompresssed_size;
 };


 static zip_uint64_t
 maximum_compressed_size(zip_uint64_t uncompressed_size) {
     /*
      According to https://sourceforge.net/p/sevenzip/discussion/45797/thread/b6bd62f8/

      1) you can use
      outSize = 1.10 * originalSize + 64 KB.
      in most cases outSize is less then 1.02 from originalSize.
      2) You can try LZMA2, where
      outSize can be = 1.001 * originalSize + 1 KB.
      */
     /* 13 bytes added for lzma alone header */
     zip_uint64_t compressed_size = (zip_uint64_t)((double)uncompressed_size * 1.1) + 64 * 1024 + 13;

     if (compressed_size < uncompressed_size) {
         return ZIP_UINT64_MAX;
     }
     return compressed_size;
 }


 static void *
 allocate(bool compress, int compression_flags, zip_error_t *error, zip_uint16_t method) {
     struct ctx *ctx;

     if (compression_flags < 0) {
         zip_error_set(error, ZIP_ER_INVAL, 0);
         return NULL;
     }

     if ((ctx = (struct ctx *)malloc(sizeof(*ctx))) == NULL) {
         zip_error_set(error, ZIP_ER_MEMORY, 0);
         return NULL;
     }

     ctx->error = error;
     ctx->compress = compress;
     ctx->compression_flags = (zip_uint32_t)compression_flags;
     ctx->compression_flags |= LZMA_PRESET_EXTREME;
     ctx->end_of_input = false;
     memset(ctx->header, 0, sizeof(ctx->header));
     ctx->header_bytes_offset = 0;
     if (ZIP_CM_LZMA) {
         ctx->header_state = INCOMPLETE;
     }
     else {
         ctx->header_state = DONE;
     }
     memset(&ctx->zstr, 0, sizeof(ctx->zstr));
     ctx->method = method;
     return ctx;
 }


 static void *
 compress_allocate(zip_uint16_t method, int compression_flags, zip_error_t *error) {
     return allocate(true, compression_flags, error, method);
 }


 static void *
 decompress_allocate(zip_uint16_t method, int compression_flags, zip_error_t *error) {
     return allocate(false, compression_flags, error, method);
 }


 static void
 deallocate(void *ud) {
     struct ctx *ctx = (struct ctx *)ud;
     free(ctx);
 }


 static zip_uint16_t
 general_purpose_bit_flags(void *ud) {
     struct ctx *ctx = (struct ctx *)ud;

     if (!ctx->compress) {
         return 0;
     }

     if (ctx->method == ZIP_CM_LZMA) {
         /* liblzma always returns an EOS/EOPM marker, see
 	 * https://sourceforge.net/p/lzmautils/discussion/708858/thread/84c5dbb9/#a5e4/3764 */
 	return 1 << 1;
     }
     return 0;
 }

 static int
 map_error(lzma_ret ret) {
     switch (ret) {
     case LZMA_DATA_ERROR:
     case LZMA_UNSUPPORTED_CHECK:
         return ZIP_ER_COMPRESSED_DATA;

     case LZMA_MEM_ERROR:
         return ZIP_ER_MEMORY;

     case LZMA_OPTIONS_ERROR:
         return ZIP_ER_INVAL;

     default:
         return ZIP_ER_INTERNAL;
     }
 }


 static bool
 start(void *ud, zip_stat_t *st, zip_file_attributes_t *attributes) {
     struct ctx *ctx = (struct ctx *)ud;
     lzma_ret ret;

     lzma_options_lzma opt_lzma;
     lzma_lzma_preset(&opt_lzma, ctx->compression_flags);
     lzma_filter filters[] = {
         {.id = (ctx->method == ZIP_CM_LZMA ? LZMA_FILTER_LZMA1 : LZMA_FILTER_LZMA2), .options = &opt_lzma},
         {.id = LZMA_VLI_UNKNOWN, .options = NULL},
     };

     ctx->zstr.avail_in = 0;
     ctx->zstr.next_in = NULL;
     ctx->zstr.avail_out = 0;
     ctx->zstr.next_out = NULL;

     if (ctx->compress) {
         if (ctx->method == ZIP_CM_LZMA)
             ret = lzma_alone_encoder(&ctx->zstr, filters[0].options);
         else
             ret = lzma_stream_encoder(&ctx->zstr, filters, LZMA_CHECK_CRC64);
     }
     else {
         if (ctx->method == ZIP_CM_LZMA)
             ret = lzma_alone_decoder(&ctx->zstr, UINT64_MAX);
         else
             ret = lzma_stream_decoder(&ctx->zstr, UINT64_MAX, LZMA_CONCATENATED);
     }

     if (ret != LZMA_OK) {
         zip_error_set(ctx->error, map_error(ret), 0);
         return false;
     }

     /* If general purpose bits 1 & 2 are both zero, write real uncompressed size in header. */
     if ((attributes->valid & ZIP_FILE_ATTRIBUTES_GENERAL_PURPOSE_BIT_FLAGS) && (attributes->general_purpose_bit_mask & 0x6) == 0x6 && (attributes->general_purpose_bit_flags & 0x06) == 0 && (st->valid & ZIP_STAT_SIZE)) {
         ctx->uncompresssed_size = st->size;
     }
     else {
         ctx->uncompresssed_size = ZIP_UINT64_MAX;
     }

     return true;
 }


 static bool
 end(void *ud) {
     struct ctx *ctx = (struct ctx *)ud;

     lzma_end(&ctx->zstr);
     return true;
 }


 static bool
 input(void *ud, zip_uint8_t *data, zip_uint64_t length) {
     struct ctx *ctx = (struct ctx *)ud;

     if (length > UINT_MAX || ctx->zstr.avail_in > 0) {
         zip_error_set(ctx->error, ZIP_ER_INVAL, 0);
         return false;
     }

     /* For decompression of LZMA1: Have we read the full "lzma alone" header yet? */
     if (ctx->method == ZIP_CM_LZMA && !ctx->compress && ctx->header_state == INCOMPLETE) {
         /* if not, get more of the data */
         zip_uint8_t got = ZIP_MIN(HEADER_BYTES_ZIP - ctx->header_bytes_offset, length);
         memcpy(ctx->header + ctx->header_bytes_offset, data, got);
         ctx->header_bytes_offset += got;
         length -= got;
         data += got;
         /* Do we have a complete header now? */
         if (ctx->header_bytes_offset == HEADER_BYTES_ZIP) {
             Bytef empty_buffer[1];
             zip_buffer_t *buffer;
             /* check magic */
             if (ctx->header[HEADER_MAGIC2_OFFSET] != 0x05 || ctx->header[HEADER_MAGIC2_OFFSET + 1] != 0x00) {
                 /* magic does not match */
                 zip_error_set(ctx->error, ZIP_ER_COMPRESSED_DATA, 0);
                 return false;
             }
             /* set size of uncompressed data in "lzma alone" header to "unknown" */
             if ((buffer = _zip_buffer_new(ctx->header + HEADER_SIZE_OFFSET, HEADER_SIZE_LENGTH)) == NULL) {
                 zip_error_set(ctx->error, ZIP_ER_MEMORY, 0);
                 return false;
             }
             _zip_buffer_put_64(buffer, ctx->uncompresssed_size);
             _zip_buffer_free(buffer);
             /* Feed header into "lzma alone" decoder, for
              * initialization; this should not produce output. */
             ctx->zstr.next_in = (void *)(ctx->header + HEADER_MAGIC_LENGTH);
             ctx->zstr.avail_in = HEADER_LZMA_ALONE_LENGTH;
             ctx->zstr.total_in = 0;
             ctx->zstr.next_out = empty_buffer;
             ctx->zstr.avail_out = sizeof(*empty_buffer);
             ctx->zstr.total_out = 0;
             /* this just initializes the decoder and does not produce output, so it consumes the complete header */
             if (lzma_code(&ctx->zstr, LZMA_RUN) != LZMA_OK || ctx->zstr.total_out > 0) {
                 zip_error_set(ctx->error, ZIP_ER_COMPRESSED_DATA, 0);
                 return false;
             }
             ctx->header_state = DONE;
         }
     }
     ctx->zstr.avail_in = (uInt)length;
     ctx->zstr.next_in = (Bytef *)data;

     return true;
 }


 static void
 end_of_input(void *ud) {
     struct ctx *ctx = (struct ctx *)ud;

     ctx->end_of_input = true;
 }


 static zip_compression_status_t
 process(void *ud, zip_uint8_t *data, zip_uint64_t *length) {
     struct ctx *ctx = (struct ctx *)ud;
     lzma_ret ret;
     /* for compression of LZMA1 */
     if (ctx->method == ZIP_CM_LZMA && ctx->compress) {
         if (ctx->header_state == INCOMPLETE) {
             /* write magic to output buffer */
             ctx->header[0] = 0x09;
             ctx->header[1] = 0x14;
             ctx->header[2] = 0x05;
             ctx->header[3] = 0x00;
             /* generate lzma parameters into output buffer */
             ctx->zstr.avail_out = HEADER_LZMA_ALONE_LENGTH;
             ctx->zstr.next_out = ctx->header + HEADER_MAGIC_LENGTH;
             ret = lzma_code(&ctx->zstr, LZMA_RUN);
             if (ret != LZMA_OK || ctx->zstr.avail_out != 0) {
                 /* assume that the whole header will be provided with the first call to lzma_code */
                 return ZIP_COMPRESSION_ERROR;
             }
             ctx->header_state = OUTPUT;
         }
         if (ctx->header_state == OUTPUT) {
             /* write header */
             zip_uint8_t write_len = ZIP_MIN(HEADER_BYTES_ZIP - ctx->header_bytes_offset, *length);
             memcpy(data, ctx->header + ctx->header_bytes_offset, write_len);
             ctx->header_bytes_offset += write_len;
             *length = write_len;
             if (ctx->header_bytes_offset == HEADER_BYTES_ZIP) {
                 ctx->header_state = DONE;
             }
             return ZIP_COMPRESSION_OK;
         }
     }

     ctx->zstr.avail_out = (uInt)ZIP_MIN(UINT_MAX, *length);
     ctx->zstr.next_out = (Bytef *)data;

     ret = lzma_code(&ctx->zstr, ctx->end_of_input ? LZMA_FINISH : LZMA_RUN);
     *length = *length - ctx->zstr.avail_out;

     switch (ret) {
     case LZMA_OK:
         return ZIP_COMPRESSION_OK;

     case LZMA_STREAM_END:
         return ZIP_COMPRESSION_END;

     case LZMA_BUF_ERROR:
         if (ctx->zstr.avail_in == 0) {
             return ZIP_COMPRESSION_NEED_DATA;
         }

         /* fallthrough */
     default:
         zip_error_set(ctx->error, map_error(ret), 0);
         return ZIP_COMPRESSION_ERROR;
     }
 }

 /* Version Required should be set to 63 (6.3) because this compression
    method was only defined in appnote.txt version 6.3.8, but Winzip
    does not unpack it if the value is not 20. */

 /* clang-format off */

 zip_compression_algorithm_t zip_algorithm_xz_compress = {
     maximum_compressed_size,
     compress_allocate,
     deallocate,
     general_purpose_bit_flags,
     20,
     start,
     end,
     input,
     end_of_input,
     process
 };


 zip_compression_algorithm_t zip_algorithm_xz_decompress = {
     maximum_compressed_size,
     decompress_allocate,
     deallocate,
     general_purpose_bit_flags,
     20,
     start,
     end,
     input,
     end_of_input,
     process
 };

 /* clang-format on */
	/*
	zip_algorithm_xz.c -- LZMA/XZ (de)compression routines
	Bazed on zip_algorithm_deflate.c -- deflate (de)compression routines
	Copyright (C) 2017-2020 Dieter Baron and Thomas Klausner

	This file is part of libzip, a library to manipulate ZIP archives.
	The authors can be contacted at <libzip@nih.at>

	Redistribution and use in source and binary forms, with or without
	modification, are permitted provided that the following conditions
	are met:
	1. Redistributions of source code must retain the above copyright
	notice, this list of conditions and the following disclaimer.
	2. Redistributions in binary form must reproduce the above copyright
	notice, this list of conditions and the following disclaimer in
	the documentation and/or other materials provided with the
	distribution.
	3. The names of the authors may not be used to endorse or promote
	products derived from this software without specific prior
	written permission.

	THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS
	OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
	DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
	GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
	IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
	OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
	IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	#include "zipint.h"

	#include <limits.h>
	#include <lzma.h>
	#include <stdlib.h>
	#include <zlib.h>

	enum header_state { INCOMPLETE, OUTPUT, DONE };

	#define HEADER_BYTES_ZIP 9
	#define HEADER_MAGIC_LENGTH 4
	#define HEADER_MAGIC1_OFFSET 0
	#define HEADER_MAGIC2_OFFSET 2
	#define HEADER_SIZE_OFFSET 9
	#define HEADER_SIZE_LENGTH 8
	#define HEADER_PARAMETERS_LENGTH 5
	#define HEADER_LZMA_ALONE_LENGTH (HEADER_PARAMETERS_LENGTH + HEADER_SIZE_LENGTH)

	struct ctx {
	zip_error_t *error;
	bool compress;
	zip_uint32_t compression_flags;
	bool end_of_input;
	lzma_stream zstr;
	zip_uint16_t method;
	/* header member is used for converting from zip to "lzma alone"
	* format
	*
	* "lzma alone" file format starts with:
	* 5 bytes lzma parameters
	* 8 bytes uncompressed size
	* compressed data
	*
	* zip archive on-disk format starts with
	* 4 bytes magic (first two bytes vary, e.g. 0x0914 or 0x1002, next bytes are 0x0500)
	* 5 bytes lzma parameters
	* compressed data
	*
	* we read the data into a header of the form
	* 4 bytes magic
	* 5 bytes lzma parameters
	* 8 bytes uncompressed size
	*/
	zip_uint8_t header[HEADER_MAGIC_LENGTH + HEADER_LZMA_ALONE_LENGTH];
	zip_uint8_t header_bytes_offset;
	enum header_state header_state;
	zip_uint64_t uncompresssed_size;
	};


	static zip_uint64_t
	maximum_compressed_size(zip_uint64_t uncompressed_size) {
	/*
	According to https://sourceforge.net/p/sevenzip/discussion/45797/thread/b6bd62f8/

	1) you can use
	outSize = 1.10 * originalSize + 64 KB.
	in most cases outSize is less then 1.02 from originalSize.
	2) You can try LZMA2, where
	outSize can be = 1.001 * originalSize + 1 KB.
	*/
	/* 13 bytes added for lzma alone header */
	zip_uint64_t compressed_size = (zip_uint64_t)((double)uncompressed_size * 1.1) + 64 * 1024 + 13;

	if (compressed_size < uncompressed_size) {
	return ZIP_UINT64_MAX;
	}
	return compressed_size;
	}


	static void *
	allocate(bool compress, int compression_flags, zip_error_t *error, zip_uint16_t method) {
	struct ctx *ctx;

	if (compression_flags < 0) {
	zip_error_set(error, ZIP_ER_INVAL, 0);
	return NULL;
	}

	if ((ctx = (struct ctx )malloc(sizeof(ctx))) == NULL) {
	zip_error_set(error, ZIP_ER_MEMORY, 0);
	return NULL;
	}

	ctx->error = error;
	ctx->compress = compress;
	ctx->compression_flags = (zip_uint32_t)compression_flags;
	ctx->compression_flags \|= LZMA_PRESET_EXTREME;
	ctx->end_of_input = false;
	memset(ctx->header, 0, sizeof(ctx->header));
	ctx->header_bytes_offset = 0;
	if (ZIP_CM_LZMA) {
	ctx->header_state = INCOMPLETE;
	}
	else {
	ctx->header_state = DONE;
	}
	memset(&ctx->zstr, 0, sizeof(ctx->zstr));
	ctx->method = method;
	return ctx;
	}


	static void *
	compress_allocate(zip_uint16_t method, int compression_flags, zip_error_t *error) {
	return allocate(true, compression_flags, error, method);
	}


	static void *
	decompress_allocate(zip_uint16_t method, int compression_flags, zip_error_t *error) {
	return allocate(false, compression_flags, error, method);
	}


	static void
	deallocate(void *ud) {
	struct ctx ctx = (struct ctx )ud;
	free(ctx);
	}


	static zip_uint16_t
	general_purpose_bit_flags(void *ud) {
	struct ctx ctx = (struct ctx )ud;

	if (!ctx->compress) {
	return 0;
	}

	if (ctx->method == ZIP_CM_LZMA) {
	/* liblzma always returns an EOS/EOPM marker, see
	* https://sourceforge.net/p/lzmautils/discussion/708858/thread/84c5dbb9/#a5e4/3764 */
	return 1 << 1;
	}
	return 0;
	}

	static int
	map_error(lzma_ret ret) {
	switch (ret) {
	case LZMA_DATA_ERROR:
	case LZMA_UNSUPPORTED_CHECK:
	return ZIP_ER_COMPRESSED_DATA;

	case LZMA_MEM_ERROR:
	return ZIP_ER_MEMORY;

	case LZMA_OPTIONS_ERROR:
	return ZIP_ER_INVAL;

	default:
	return ZIP_ER_INTERNAL;
	}
	}


	static bool
	start(void ud, zip_stat_t st, zip_file_attributes_t *attributes) {
	struct ctx ctx = (struct ctx )ud;
	lzma_ret ret;

	lzma_options_lzma opt_lzma;
	lzma_lzma_preset(&opt_lzma, ctx->compression_flags);
	lzma_filter filters[] = {
	{.id = (ctx->method == ZIP_CM_LZMA ? LZMA_FILTER_LZMA1 : LZMA_FILTER_LZMA2), .options = &opt_lzma},
	{.id = LZMA_VLI_UNKNOWN, .options = NULL},
	};

	ctx->zstr.avail_in = 0;
	ctx->zstr.next_in = NULL;
	ctx->zstr.avail_out = 0;
	ctx->zstr.next_out = NULL;

	if (ctx->compress) {
	if (ctx->method == ZIP_CM_LZMA)
	ret = lzma_alone_encoder(&ctx->zstr, filters[0].options);
	else
	ret = lzma_stream_encoder(&ctx->zstr, filters, LZMA_CHECK_CRC64);
	}
	else {
	if (ctx->method == ZIP_CM_LZMA)
	ret = lzma_alone_decoder(&ctx->zstr, UINT64_MAX);
	else
	ret = lzma_stream_decoder(&ctx->zstr, UINT64_MAX, LZMA_CONCATENATED);
	}

	if (ret != LZMA_OK) {
	zip_error_set(ctx->error, map_error(ret), 0);
	return false;
	}

	/* If general purpose bits 1 & 2 are both zero, write real uncompressed size in header. */
	if ((attributes->valid & ZIP_FILE_ATTRIBUTES_GENERAL_PURPOSE_BIT_FLAGS) && (attributes->general_purpose_bit_mask & 0x6) == 0x6 && (attributes->general_purpose_bit_flags & 0x06) == 0 && (st->valid & ZIP_STAT_SIZE)) {
	ctx->uncompresssed_size = st->size;
	}
	else {
	ctx->uncompresssed_size = ZIP_UINT64_MAX;
	}

	return true;
	}


	static bool
	end(void *ud) {
	struct ctx ctx = (struct ctx )ud;

	lzma_end(&ctx->zstr);
	return true;
	}


	static bool
	input(void ud, zip_uint8_t data, zip_uint64_t length) {
	struct ctx ctx = (struct ctx )ud;

	if (length > UINT_MAX \|\| ctx->zstr.avail_in > 0) {
	zip_error_set(ctx->error, ZIP_ER_INVAL, 0);
	return false;
	}

	/* For decompression of LZMA1: Have we read the full "lzma alone" header yet? */
	if (ctx->method == ZIP_CM_LZMA && !ctx->compress && ctx->header_state == INCOMPLETE) {
	/* if not, get more of the data */
	zip_uint8_t got = ZIP_MIN(HEADER_BYTES_ZIP - ctx->header_bytes_offset, length);
	memcpy(ctx->header + ctx->header_bytes_offset, data, got);
	ctx->header_bytes_offset += got;
	length -= got;
	data += got;
	/* Do we have a complete header now? */
	if (ctx->header_bytes_offset == HEADER_BYTES_ZIP) {
	Bytef empty_buffer[1];
	zip_buffer_t *buffer;
	/* check magic */
	if (ctx->header[HEADER_MAGIC2_OFFSET] != 0x05 \|\| ctx->header[HEADER_MAGIC2_OFFSET + 1] != 0x00) {
	/* magic does not match */
	zip_error_set(ctx->error, ZIP_ER_COMPRESSED_DATA, 0);
	return false;
	}
	/* set size of uncompressed data in "lzma alone" header to "unknown" */
	if ((buffer = _zip_buffer_new(ctx->header + HEADER_SIZE_OFFSET, HEADER_SIZE_LENGTH)) == NULL) {
	zip_error_set(ctx->error, ZIP_ER_MEMORY, 0);
	return false;
	}
	_zip_buffer_put_64(buffer, ctx->uncompresssed_size);
	_zip_buffer_free(buffer);
	/* Feed header into "lzma alone" decoder, for
	* initialization; this should not produce output. */
	ctx->zstr.next_in = (void *)(ctx->header + HEADER_MAGIC_LENGTH);
	ctx->zstr.avail_in = HEADER_LZMA_ALONE_LENGTH;
	ctx->zstr.total_in = 0;
	ctx->zstr.next_out = empty_buffer;
	ctx->zstr.avail_out = sizeof(*empty_buffer);
	ctx->zstr.total_out = 0;
	/* this just initializes the decoder and does not produce output, so it consumes the complete header */
	if (lzma_code(&ctx->zstr, LZMA_RUN) != LZMA_OK \|\| ctx->zstr.total_out > 0) {
	zip_error_set(ctx->error, ZIP_ER_COMPRESSED_DATA, 0);
	return false;
	}
	ctx->header_state = DONE;
	}
	}
	ctx->zstr.avail_in = (uInt)length;
	ctx->zstr.next_in = (Bytef *)data;

	return true;
	}


	static void
	end_of_input(void *ud) {
	struct ctx ctx = (struct ctx )ud;

	ctx->end_of_input = true;
	}


	static zip_compression_status_t
	process(void ud, zip_uint8_t data, zip_uint64_t *length) {
	struct ctx ctx = (struct ctx )ud;
	lzma_ret ret;
	/* for compression of LZMA1 */
	if (ctx->method == ZIP_CM_LZMA && ctx->compress) {
	if (ctx->header_state == INCOMPLETE) {
	/* write magic to output buffer */
	ctx->header[0] = 0x09;
	ctx->header[1] = 0x14;
	ctx->header[2] = 0x05;
	ctx->header[3] = 0x00;
	/* generate lzma parameters into output buffer */
	ctx->zstr.avail_out = HEADER_LZMA_ALONE_LENGTH;
	ctx->zstr.next_out = ctx->header + HEADER_MAGIC_LENGTH;
	ret = lzma_code(&ctx->zstr, LZMA_RUN);
	if (ret != LZMA_OK \|\| ctx->zstr.avail_out != 0) {
	/* assume that the whole header will be provided with the first call to lzma_code */
	return ZIP_COMPRESSION_ERROR;
	}
	ctx->header_state = OUTPUT;
	}
	if (ctx->header_state == OUTPUT) {
	/* write header */
	zip_uint8_t write_len = ZIP_MIN(HEADER_BYTES_ZIP - ctx->header_bytes_offset, *length);
	memcpy(data, ctx->header + ctx->header_bytes_offset, write_len);
	ctx->header_bytes_offset += write_len;
	*length = write_len;
	if (ctx->header_bytes_offset == HEADER_BYTES_ZIP) {
	ctx->header_state = DONE;
	}
	return ZIP_COMPRESSION_OK;
	}
	}

	ctx->zstr.avail_out = (uInt)ZIP_MIN(UINT_MAX, *length);
	ctx->zstr.next_out = (Bytef *)data;

	ret = lzma_code(&ctx->zstr, ctx->end_of_input ? LZMA_FINISH : LZMA_RUN);
	length = length - ctx->zstr.avail_out;

	switch (ret) {
	case LZMA_OK:
	return ZIP_COMPRESSION_OK;

	case LZMA_STREAM_END:
	return ZIP_COMPRESSION_END;

	case LZMA_BUF_ERROR:
	if (ctx->zstr.avail_in == 0) {
	return ZIP_COMPRESSION_NEED_DATA;
	}

	/* fallthrough */
	default:
	zip_error_set(ctx->error, map_error(ret), 0);
	return ZIP_COMPRESSION_ERROR;
	}
	}

	/* Version Required should be set to 63 (6.3) because this compression
	method was only defined in appnote.txt version 6.3.8, but Winzip
	does not unpack it if the value is not 20. */

	/* clang-format off */

	zip_compression_algorithm_t zip_algorithm_xz_compress = {
	maximum_compressed_size,
	compress_allocate,
	deallocate,
	general_purpose_bit_flags,
	20,
	start,
	end,
	input,
	end_of_input,
	process
	};


	zip_compression_algorithm_t zip_algorithm_xz_decompress = {
	maximum_compressed_size,
	decompress_allocate,
	deallocate,
	general_purpose_bit_flags,
	20,
	start,
	end,
	input,
	end_of_input,
	process
	};

	/* clang-format on */