test/recipes/70-test_key_share.t - third_party/openssl - Git at Google

 #! /usr/bin/env perl
 # Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
 #
 # Licensed under the OpenSSL license (the "License").  You may not use
 # this file except in compliance with the License.  You can obtain a copy
 # in the file LICENSE in the source distribution or at
 # https://www.openssl.org/source/license.html

 use strict;
 use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file bldtop_dir/;
 use OpenSSL::Test::Utils;
 use TLSProxy::Proxy;
 use File::Temp qw(tempfile);

 use constant {
     LOOK_ONLY => 0,
     EMPTY_EXTENSION => 1,
     MISSING_EXTENSION => 2,
     NO_ACCEPTABLE_KEY_SHARES => 3,
     NON_PREFERRED_KEY_SHARE => 4,
     ACCEPTABLE_AT_END => 5,
     NOT_IN_SUPPORTED_GROUPS => 6,
     GROUP_ID_TOO_SHORT => 7,
     KEX_LEN_MISMATCH => 8,
     ZERO_LEN_KEX_DATA => 9,
     TRAILING_DATA => 10,
     SELECT_X25519 => 11
 };

 use constant {
     CLIENT_TO_SERVER => 1,
     SERVER_TO_CLIENT => 2
 };


 use constant {
     X25519 => 0x1d,
     P_256 => 0x17
 };

 my $testtype;
 my $direction;
 my $selectedgroupid;

 my $test_name = "test_key_share";
 setup($test_name);

 plan skip_all => "TLSProxy isn't usable on $^O"
     if $^O =~ /^(VMS|MSWin32)$/;

 plan skip_all => "$test_name needs the dynamic engine feature enabled"
     if disabled("engine") || disabled("dynamic-engine");

 plan skip_all => "$test_name needs the sock feature enabled"
     if disabled("sock");

 plan skip_all => "$test_name needs TLS1.3 enabled"
     if disabled("tls1_3");

 $ENV{OPENSSL_ia32cap} = '~0x200000200000000';

 my $proxy = TLSProxy::Proxy->new(
     undef,
     cmdstr(app(["openssl"]), display => 1),
     srctop_file("apps", "server.pem"),
     (!$ENV{HARNESS_ACTIVE} || $ENV{HARNESS_VERBOSE})
 );

 #We assume that test_ssl_new and friends will test the happy path for this,
 #so we concentrate on the less common scenarios

 #Test 1: An empty key_shares extension should not succeed
 $testtype = EMPTY_EXTENSION;
 $direction = CLIENT_TO_SERVER;
 $proxy->filter(\&modify_key_shares_filter);
 $proxy->start() or plan skip_all => "Unable to start up Proxy for tests";
 plan tests => 17;
 #TODO(TLS1.3): Actually this should succeed after a HelloRetryRequest - but
 #we've not implemented that yet, so for now we look for a fail
 ok(TLSProxy::Message->fail(), "Empty key_shares");

 #Test 2: A missing key_shares extension should not succeed
 $proxy->clear();
 $testtype = MISSING_EXTENSION;
 $proxy->start();
 #TODO(TLS1.3): As above this should really succeed after a HelloRetryRequest,
 #but we look for fail for now
 ok(TLSProxy::Message->fail(), "Missing key_shares extension");

 #Test 3: No acceptable key_shares should fail
 $proxy->clear();
 $testtype = NO_ACCEPTABLE_KEY_SHARES;
 $proxy->start();
 #TODO(TLS1.3): Again this should go around the loop of a HelloRetryRequest but
 #we fail for now
 ok(TLSProxy::Message->fail(), "No acceptable key_shares");

 #Test 4: A non preferred but acceptable key_share should succeed
 $proxy->clear();
 $proxy->filter(undef);
 $proxy->clientflags("-curves P-256");
 $proxy->start();
 ok(TLSProxy::Message->success(), "Non preferred key_share");
 $proxy->filter(\&modify_key_shares_filter);

 #Test 5: An acceptable key_share after a list of non-acceptable ones should
 #succeed
 $proxy->clear();
 $testtype = ACCEPTABLE_AT_END;
 $proxy->start();
 ok(TLSProxy::Message->success(), "Acceptable key_share at end of list");

 #Test 6: An acceptable key_share but for a group not in supported_groups should
 #fail
 $proxy->clear();
 $testtype = NOT_IN_SUPPORTED_GROUPS;
 $proxy->start();
 ok(TLSProxy::Message->fail(), "Acceptable key_share not in supported_groups");

 #Test 7: Too short group_id should fail
 $proxy->clear();
 $testtype = GROUP_ID_TOO_SHORT;
 $proxy->start();
 ok(TLSProxy::Message->fail(), "Group id too short");

 #Test 8: key_exchange length mismatch should fail
 $proxy->clear();
 $testtype = KEX_LEN_MISMATCH;
 $proxy->start();
 ok(TLSProxy::Message->fail(), "key_exchange length mismatch");

 #Test 9: Zero length key_exchange should fail
 $proxy->clear();
 $testtype = ZERO_LEN_KEX_DATA;
 $proxy->start();
 ok(TLSProxy::Message->fail(), "zero length key_exchange data");

 #Test 10: Trailing data on key_share list should fail
 $proxy->clear();
 $testtype = TRAILING_DATA;
 $proxy->start();
 ok(TLSProxy::Message->fail(), "key_share list trailing data");

 #Test 11: Multiple acceptable key_shares - we choose the first one
 $proxy->clear();
 $direction = SERVER_TO_CLIENT;
 $testtype = LOOK_ONLY;
 $proxy->clientflags("-curves P-256:X25519");
 $proxy->start();
 ok(TLSProxy::Message->success() && ($selectedgroupid == P_256),
    "Multiple acceptable key_shares");

 #Test 12: Multiple acceptable key_shares - we choose the first one (part 2)
 $proxy->clear();
 $proxy->clientflags("-curves X25519:P-256");
 $proxy->start();
 ok(TLSProxy::Message->success() && ($selectedgroupid == X25519),
    "Multiple acceptable key_shares (part 2)");

 #Test 13: Server sends key_share that wasn't offerred should fail
 $proxy->clear();
 $testtype = SELECT_X25519;
 $proxy->clientflags("-curves P-256");
 $proxy->start();
 ok(TLSProxy::Message->fail(), "Non offered key_share");

 #Test 14: Too short group_id in ServerHello should fail
 $proxy->clear();
 $testtype = GROUP_ID_TOO_SHORT;
 $proxy->start();
 ok(TLSProxy::Message->fail(), "Group id too short in ServerHello");

 #Test 15: key_exchange length mismatch in ServerHello should fail
 $proxy->clear();
 $testtype = KEX_LEN_MISMATCH;
 $proxy->start();
 ok(TLSProxy::Message->fail(), "key_exchange length mismatch in ServerHello");

 #Test 16: Zero length key_exchange in ServerHello should fail
 $proxy->clear();
 $testtype = ZERO_LEN_KEX_DATA;
 $proxy->start();
 ok(TLSProxy::Message->fail(), "zero length key_exchange data in ServerHello");

 #Test 17: Trailing data on key_share in ServerHello should fail
 $proxy->clear();
 $testtype = TRAILING_DATA;
 $proxy->start();
 ok(TLSProxy::Message->fail(), "key_share trailing data in ServerHello");


 sub modify_key_shares_filter
 {
     my $proxy = shift;

     # We're only interested in the initial ClientHello
     if (($direction == CLIENT_TO_SERVER && $proxy->flight != 0)
             || ($direction == SERVER_TO_CLIENT && $proxy->flight != 1)) {
         return;
     }

     foreach my $message (@{$proxy->message_list}) {
         if ($message->mt == TLSProxy::Message::MT_CLIENT_HELLO
                 && $direction == CLIENT_TO_SERVER) {
             my $ext;
             my $suppgroups;

             #Setup supported groups to include some unrecognised groups
             $suppgroups = pack "C8",
                 0x00, 0x06, #List Length
                 0xff, 0xfe, #Non existing group 1
                 0xff, 0xff, #Non existing group 2
                 0x00, 0x1d; #x25519

             if ($testtype == EMPTY_EXTENSION) {
                 $ext = pack "C2",
                     0x00, 0x00;
             } elsif ($testtype == NO_ACCEPTABLE_KEY_SHARES) {
                 $ext = pack "C12",
                     0x00, 0x0a, #List Length
                     0xff, 0xfe, #Non existing group 1
                     0x00, 0x01, 0xff, #key_exchange data
                     0xff, 0xff, #Non existing group 2
                     0x00, 0x01, 0xff; #key_exchange data
             } elsif ($testtype == ACCEPTABLE_AT_END) {
                 $ext = pack "C11H64",
                     0x00, 0x29, #List Length
                     0xff, 0xfe, #Non existing group 1
                     0x00, 0x01, 0xff, #key_exchange data
                     0x00, 0x1d, #x25519
                     0x00, 0x20, #key_exchange data length
                     "155155B95269ED5C87EAA99C2EF5A593".
                     "EDF83495E80380089F831B94D14B1421";  #key_exchange data
             } elsif ($testtype == NOT_IN_SUPPORTED_GROUPS) {
                 $suppgroups = pack "C4",
                     0x00, 0x02, #List Length
                     0x00, 0xfe; #Non existing group 1
             } elsif ($testtype == GROUP_ID_TOO_SHORT) {
                 $ext = pack "C6H64C1",
                     0x00, 0x25, #List Length
                     0x00, 0x1d, #x25519
                     0x00, 0x20, #key_exchange data length
                     "155155B95269ED5C87EAA99C2EF5A593".
                     "EDF83495E80380089F831B94D14B1421";  #key_exchange data
                     0x00;       #Group id too short
             } elsif ($testtype == KEX_LEN_MISMATCH) {
                 $ext = pack "C8",
                     0x00, 0x06, #List Length
                     0x00, 0x1d, #x25519
                     0x00, 0x20, #key_exchange data length
                     0x15, 0x51; #Only two bytes of data, but length should be 32
             } elsif ($testtype == ZERO_LEN_KEX_DATA) {
                 $ext = pack "C10H64",
                     0x00, 0x28, #List Length
                     0xff, 0xfe, #Non existing group 1
                     0x00, 0x00, #zero length key_exchange data is invalid
                     0x00, 0x1d, #x25519
                     0x00, 0x20, #key_exchange data length
                     "155155B95269ED5C87EAA99C2EF5A593".
                     "EDF83495E80380089F831B94D14B1421";  #key_exchange data
             } elsif ($testtype == TRAILING_DATA) {
                 $ext = pack "C6H64C1",
                     0x00, 0x24, #List Length
                     0x00, 0x1d, #x25519
                     0x00, 0x20, #key_exchange data length
                     "155155B95269ED5C87EAA99C2EF5A593".
                     "EDF83495E80380089F831B94D14B1421", #key_exchange data
                     0x00; #Trailing garbage
             }

             $message->set_extension(
                 TLSProxy::Message::EXT_SUPPORTED_GROUPS, $suppgroups);

             if ($testtype == MISSING_EXTENSION) {
                 $message->delete_extension(
                     TLSProxy::Message::EXT_KEY_SHARE);
             } elsif ($testtype != NOT_IN_SUPPORTED_GROUPS) {
                 $message->set_extension(
                     TLSProxy::Message::EXT_KEY_SHARE, $ext);
             }

             $message->repack();
         } elsif ($message->mt == TLSProxy::Message::MT_SERVER_HELLO
                      && $direction == SERVER_TO_CLIENT) {
             my $ext;
             my $key_share =
                 ${$message->extension_data}{TLSProxy::Message::EXT_KEY_SHARE};
             $selectedgroupid = unpack("n", $key_share);

             if ($testtype == LOOK_ONLY) {
                 return;
             }
             if ($testtype == SELECT_X25519) {
                 $ext = pack "C4H64",
                     0x00, 0x1d, #x25519
                     0x00, 0x20, #key_exchange data length
                     "155155B95269ED5C87EAA99C2EF5A593".
                     "EDF83495E80380089F831B94D14B1421";  #key_exchange data
             } elsif ($testtype == GROUP_ID_TOO_SHORT) {
                 $ext = pack "C1",
                     0x00;
             } elsif ($testtype == KEX_LEN_MISMATCH) {
                 $ext = pack "C6",
                     0x00, 0x1d, #x25519
                     0x00, 0x20, #key_exchange data length
                     0x15, 0x51; #Only two bytes of data, but length should be 32
             } elsif ($testtype == ZERO_LEN_KEX_DATA) {
                 $ext = pack "C4",
                     0x00, 0x1d, #x25519
                     0x00, 0x00, #zero length key_exchange data is invalid
             } elsif ($testtype == TRAILING_DATA) {
                 $ext = pack "C4H64C1",
                     0x00, 0x1d, #x25519
                     0x00, 0x20, #key_exchange data length
                     "155155B95269ED5C87EAA99C2EF5A593".
                     "EDF83495E80380089F831B94D14B1421", #key_exchange data
                     0x00; #Trailing garbage
             }
             $message->set_extension( TLSProxy::Message::EXT_KEY_SHARE, $ext);

             $message->repack();
         }
     }
 }
	#! /usr/bin/env perl
	# Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
	#
	# Licensed under the OpenSSL license (the "License"). You may not use
	# this file except in compliance with the License. You can obtain a copy
	# in the file LICENSE in the source distribution or at
	# https://www.openssl.org/source/license.html

	use strict;
	use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file bldtop_dir/;
	use OpenSSL::Test::Utils;
	use TLSProxy::Proxy;
	use File::Temp qw(tempfile);

	use constant {
	LOOK_ONLY => 0,
	EMPTY_EXTENSION => 1,
	MISSING_EXTENSION => 2,
	NO_ACCEPTABLE_KEY_SHARES => 3,
	NON_PREFERRED_KEY_SHARE => 4,
	ACCEPTABLE_AT_END => 5,
	NOT_IN_SUPPORTED_GROUPS => 6,
	GROUP_ID_TOO_SHORT => 7,
	KEX_LEN_MISMATCH => 8,
	ZERO_LEN_KEX_DATA => 9,
	TRAILING_DATA => 10,
	SELECT_X25519 => 11
	};

	use constant {
	CLIENT_TO_SERVER => 1,
	SERVER_TO_CLIENT => 2
	};


	use constant {
	X25519 => 0x1d,
	P_256 => 0x17
	};

	my $testtype;
	my $direction;
	my $selectedgroupid;

	my $test_name = "test_key_share";
	setup($test_name);

	plan skip_all => "TLSProxy isn't usable on $^O"
	if $^O =~ /^(VMS\|MSWin32)$/;

	plan skip_all => "$test_name needs the dynamic engine feature enabled"
	if disabled("engine") \|\| disabled("dynamic-engine");

	plan skip_all => "$test_name needs the sock feature enabled"
	if disabled("sock");

	plan skip_all => "$test_name needs TLS1.3 enabled"
	if disabled("tls1_3");

	$ENV{OPENSSL_ia32cap} = '~0x200000200000000';

	my $proxy = TLSProxy::Proxy->new(
	undef,
	cmdstr(app(["openssl"]), display => 1),
	srctop_file("apps", "server.pem"),
	(!$ENV{HARNESS_ACTIVE} \|\| $ENV{HARNESS_VERBOSE})
	);

	#We assume that test_ssl_new and friends will test the happy path for this,
	#so we concentrate on the less common scenarios

	#Test 1: An empty key_shares extension should not succeed
	$testtype = EMPTY_EXTENSION;
	$direction = CLIENT_TO_SERVER;
	$proxy->filter(\&modify_key_shares_filter);
	$proxy->start() or plan skip_all => "Unable to start up Proxy for tests";
	plan tests => 17;
	#TODO(TLS1.3): Actually this should succeed after a HelloRetryRequest - but
	#we've not implemented that yet, so for now we look for a fail
	ok(TLSProxy::Message->fail(), "Empty key_shares");

	#Test 2: A missing key_shares extension should not succeed
	$proxy->clear();
	$testtype = MISSING_EXTENSION;
	$proxy->start();
	#TODO(TLS1.3): As above this should really succeed after a HelloRetryRequest,
	#but we look for fail for now
	ok(TLSProxy::Message->fail(), "Missing key_shares extension");

	#Test 3: No acceptable key_shares should fail
	$proxy->clear();
	$testtype = NO_ACCEPTABLE_KEY_SHARES;
	$proxy->start();
	#TODO(TLS1.3): Again this should go around the loop of a HelloRetryRequest but
	#we fail for now
	ok(TLSProxy::Message->fail(), "No acceptable key_shares");

	#Test 4: A non preferred but acceptable key_share should succeed
	$proxy->clear();
	$proxy->filter(undef);
	$proxy->clientflags("-curves P-256");
	$proxy->start();
	ok(TLSProxy::Message->success(), "Non preferred key_share");
	$proxy->filter(\&modify_key_shares_filter);

	#Test 5: An acceptable key_share after a list of non-acceptable ones should
	#succeed
	$proxy->clear();
	$testtype = ACCEPTABLE_AT_END;
	$proxy->start();
	ok(TLSProxy::Message->success(), "Acceptable key_share at end of list");

	#Test 6: An acceptable key_share but for a group not in supported_groups should
	#fail
	$proxy->clear();
	$testtype = NOT_IN_SUPPORTED_GROUPS;
	$proxy->start();
	ok(TLSProxy::Message->fail(), "Acceptable key_share not in supported_groups");

	#Test 7: Too short group_id should fail
	$proxy->clear();
	$testtype = GROUP_ID_TOO_SHORT;
	$proxy->start();
	ok(TLSProxy::Message->fail(), "Group id too short");

	#Test 8: key_exchange length mismatch should fail
	$proxy->clear();
	$testtype = KEX_LEN_MISMATCH;
	$proxy->start();
	ok(TLSProxy::Message->fail(), "key_exchange length mismatch");

	#Test 9: Zero length key_exchange should fail
	$proxy->clear();
	$testtype = ZERO_LEN_KEX_DATA;
	$proxy->start();
	ok(TLSProxy::Message->fail(), "zero length key_exchange data");

	#Test 10: Trailing data on key_share list should fail
	$proxy->clear();
	$testtype = TRAILING_DATA;
	$proxy->start();
	ok(TLSProxy::Message->fail(), "key_share list trailing data");

	#Test 11: Multiple acceptable key_shares - we choose the first one
	$proxy->clear();
	$direction = SERVER_TO_CLIENT;
	$testtype = LOOK_ONLY;
	$proxy->clientflags("-curves P-256:X25519");
	$proxy->start();
	ok(TLSProxy::Message->success() && ($selectedgroupid == P_256),
	"Multiple acceptable key_shares");

	#Test 12: Multiple acceptable key_shares - we choose the first one (part 2)
	$proxy->clear();
	$proxy->clientflags("-curves X25519:P-256");
	$proxy->start();
	ok(TLSProxy::Message->success() && ($selectedgroupid == X25519),
	"Multiple acceptable key_shares (part 2)");

	#Test 13: Server sends key_share that wasn't offerred should fail
	$proxy->clear();
	$testtype = SELECT_X25519;
	$proxy->clientflags("-curves P-256");
	$proxy->start();
	ok(TLSProxy::Message->fail(), "Non offered key_share");

	#Test 14: Too short group_id in ServerHello should fail
	$proxy->clear();
	$testtype = GROUP_ID_TOO_SHORT;
	$proxy->start();
	ok(TLSProxy::Message->fail(), "Group id too short in ServerHello");

	#Test 15: key_exchange length mismatch in ServerHello should fail
	$proxy->clear();
	$testtype = KEX_LEN_MISMATCH;
	$proxy->start();
	ok(TLSProxy::Message->fail(), "key_exchange length mismatch in ServerHello");

	#Test 16: Zero length key_exchange in ServerHello should fail
	$proxy->clear();
	$testtype = ZERO_LEN_KEX_DATA;
	$proxy->start();
	ok(TLSProxy::Message->fail(), "zero length key_exchange data in ServerHello");

	#Test 17: Trailing data on key_share in ServerHello should fail
	$proxy->clear();
	$testtype = TRAILING_DATA;
	$proxy->start();
	ok(TLSProxy::Message->fail(), "key_share trailing data in ServerHello");


	sub modify_key_shares_filter
	{
	my $proxy = shift;

	# We're only interested in the initial ClientHello
	if (($direction == CLIENT_TO_SERVER && $proxy->flight != 0)
	\|\| ($direction == SERVER_TO_CLIENT && $proxy->flight != 1)) {
	return;
	}

	foreach my $message (@{$proxy->message_list}) {
	if ($message->mt == TLSProxy::Message::MT_CLIENT_HELLO
	&& $direction == CLIENT_TO_SERVER) {
	my $ext;
	my $suppgroups;

	#Setup supported groups to include some unrecognised groups
	$suppgroups = pack "C8",
	0x00, 0x06, #List Length
	0xff, 0xfe, #Non existing group 1
	0xff, 0xff, #Non existing group 2
	0x00, 0x1d; #x25519

	if ($testtype == EMPTY_EXTENSION) {
	$ext = pack "C2",
	0x00, 0x00;
	} elsif ($testtype == NO_ACCEPTABLE_KEY_SHARES) {
	$ext = pack "C12",
	0x00, 0x0a, #List Length
	0xff, 0xfe, #Non existing group 1
	0x00, 0x01, 0xff, #key_exchange data
	0xff, 0xff, #Non existing group 2
	0x00, 0x01, 0xff; #key_exchange data
	} elsif ($testtype == ACCEPTABLE_AT_END) {
	$ext = pack "C11H64",
	0x00, 0x29, #List Length
	0xff, 0xfe, #Non existing group 1
	0x00, 0x01, 0xff, #key_exchange data
	0x00, 0x1d, #x25519
	0x00, 0x20, #key_exchange data length
	"155155B95269ED5C87EAA99C2EF5A593".
	"EDF83495E80380089F831B94D14B1421"; #key_exchange data
	} elsif ($testtype == NOT_IN_SUPPORTED_GROUPS) {
	$suppgroups = pack "C4",
	0x00, 0x02, #List Length
	0x00, 0xfe; #Non existing group 1
	} elsif ($testtype == GROUP_ID_TOO_SHORT) {
	$ext = pack "C6H64C1",
	0x00, 0x25, #List Length
	0x00, 0x1d, #x25519
	0x00, 0x20, #key_exchange data length
	"155155B95269ED5C87EAA99C2EF5A593".
	"EDF83495E80380089F831B94D14B1421"; #key_exchange data
	0x00; #Group id too short
	} elsif ($testtype == KEX_LEN_MISMATCH) {
	$ext = pack "C8",
	0x00, 0x06, #List Length
	0x00, 0x1d, #x25519
	0x00, 0x20, #key_exchange data length
	0x15, 0x51; #Only two bytes of data, but length should be 32
	} elsif ($testtype == ZERO_LEN_KEX_DATA) {
	$ext = pack "C10H64",
	0x00, 0x28, #List Length
	0xff, 0xfe, #Non existing group 1
	0x00, 0x00, #zero length key_exchange data is invalid
	0x00, 0x1d, #x25519
	0x00, 0x20, #key_exchange data length
	"155155B95269ED5C87EAA99C2EF5A593".
	"EDF83495E80380089F831B94D14B1421"; #key_exchange data
	} elsif ($testtype == TRAILING_DATA) {
	$ext = pack "C6H64C1",
	0x00, 0x24, #List Length
	0x00, 0x1d, #x25519
	0x00, 0x20, #key_exchange data length
	"155155B95269ED5C87EAA99C2EF5A593".
	"EDF83495E80380089F831B94D14B1421", #key_exchange data
	0x00; #Trailing garbage
	}

	$message->set_extension(
	TLSProxy::Message::EXT_SUPPORTED_GROUPS, $suppgroups);

	if ($testtype == MISSING_EXTENSION) {
	$message->delete_extension(
	TLSProxy::Message::EXT_KEY_SHARE);
	} elsif ($testtype != NOT_IN_SUPPORTED_GROUPS) {
	$message->set_extension(
	TLSProxy::Message::EXT_KEY_SHARE, $ext);
	}

	$message->repack();
	} elsif ($message->mt == TLSProxy::Message::MT_SERVER_HELLO
	&& $direction == SERVER_TO_CLIENT) {
	my $ext;
	my $key_share =
	${$message->extension_data}{TLSProxy::Message::EXT_KEY_SHARE};
	$selectedgroupid = unpack("n", $key_share);

	if ($testtype == LOOK_ONLY) {
	return;
	}
	if ($testtype == SELECT_X25519) {
	$ext = pack "C4H64",
	0x00, 0x1d, #x25519
	0x00, 0x20, #key_exchange data length
	"155155B95269ED5C87EAA99C2EF5A593".
	"EDF83495E80380089F831B94D14B1421"; #key_exchange data
	} elsif ($testtype == GROUP_ID_TOO_SHORT) {
	$ext = pack "C1",
	0x00;
	} elsif ($testtype == KEX_LEN_MISMATCH) {
	$ext = pack "C6",
	0x00, 0x1d, #x25519
	0x00, 0x20, #key_exchange data length
	0x15, 0x51; #Only two bytes of data, but length should be 32
	} elsif ($testtype == ZERO_LEN_KEX_DATA) {
	$ext = pack "C4",
	0x00, 0x1d, #x25519
	0x00, 0x00, #zero length key_exchange data is invalid
	} elsif ($testtype == TRAILING_DATA) {
	$ext = pack "C4H64C1",
	0x00, 0x1d, #x25519
	0x00, 0x20, #key_exchange data length
	"155155B95269ED5C87EAA99C2EF5A593".
	"EDF83495E80380089F831B94D14B1421", #key_exchange data
	0x00; #Trailing garbage
	}
	$message->set_extension( TLSProxy::Message::EXT_KEY_SHARE, $ext);

	$message->repack();
	}
	}
	}