| ## |
| ## Makefile for OpenSSL |
| ## |
| ## {- join("\n## ", @autowarntext) -} |
| {- |
| our $objext = $target{obj_extension} || ".o"; |
| our $depext = $target{dep_extension} || ".d"; |
| our $exeext = $target{exe_extension} || ""; |
| our $libext = $target{lib_extension} || ".a"; |
| our $shlibext = $target{shared_extension} || ".so"; |
| our $shlibvariant = $target{shlib_variant} || ""; |
| our $shlibextsimple = $target{shared_extension_simple} || ".so"; |
| our $shlibextimport = $target{shared_import_extension} || ""; |
| our $dsoext = $target{dso_extension} || ".so"; |
| our $makedepprog = $disabled{makedepend} ? undef : $config{makedepprog}; |
| |
| sub windowsdll { $config{target} =~ /^(?:Cygwin|mingw)/ } |
| |
| our $sover_dirname = $config{shlib_version_number}; |
| $sover_dirname =~ s|\.|_|g |
| if $config{target} =~ /^mingw/; |
| |
| # shlib and shlib_simple both take a static library name and figure |
| # out what the shlib name should be. |
| # |
| # When OpenSSL is configured "no-shared", these functions will just |
| # return empty lists, making them suitable to join(). |
| # |
| # With Windows DLL producers, shlib($libname) will return the shared |
| # library name (which usually is different from the static library |
| # name) with the default shared extension appended to it, while |
| # shlib_simple($libname) will return the static library name with |
| # the shared extension followed by ".a" appended to it. The former |
| # result is used as the runtime shared library while the latter is |
| # used as the DLL import library. |
| # |
| # On all Unix systems, shlib($libname) will return the library name |
| # with the default shared extension, while shlib_simple($libname) |
| # will return the name from shlib($libname) with any SO version number |
| # removed. On some systems, they may therefore return the exact same |
| # string. |
| sub shlib { |
| my $lib = shift; |
| return () if $disabled{shared} || $lib =~ /\.a$/; |
| return $unified_info{sharednames}->{$lib}. $shlibvariant. '$(SHLIB_EXT)'; |
| } |
| sub shlib_simple { |
| my $lib = shift; |
| return () if $disabled{shared} || $lib =~ /\.a$/; |
| |
| if (windowsdll()) { |
| return $lib . '$(SHLIB_EXT_IMPORT)'; |
| } |
| return $lib . '$(SHLIB_EXT_SIMPLE)'; |
| } |
| |
| # Easy fixing of static library names |
| sub lib { |
| (my $lib = shift) =~ s/\.a$//; |
| return $lib . $libext; |
| } |
| |
| # dso is a complement to shlib / shlib_simple that returns the |
| # given libname with the simple shared extension (possible SO version |
| # removed). This differs from shlib_simple() by being unconditional. |
| sub dso { |
| my $engine = shift; |
| |
| return $engine . $dsoext; |
| } |
| # This makes sure things get built in the order they need |
| # to. You're welcome. |
| sub dependmagic { |
| my $target = shift; |
| |
| return "$target: build_generated\n\t\$(MAKE) depend && \$(MAKE) _$target\n_$target"; |
| } |
| ''; |
| -} |
| PLATFORM={- $config{target} -} |
| OPTIONS={- $config{options} -} |
| CONFIGURE_ARGS=({- join(", ",quotify_l(@{$config{perlargv}})) -}) |
| SRCDIR={- $config{sourcedir} -} |
| BLDDIR={- $config{builddir} -} |
| |
| VERSION={- $config{version} -} |
| MAJOR={- $config{major} -} |
| MINOR={- $config{minor} -} |
| SHLIB_VERSION_NUMBER={- $config{shlib_version_number} -} |
| SHLIB_VERSION_HISTORY={- $config{shlib_version_history} -} |
| SHLIB_MAJOR={- $config{shlib_major} -} |
| SHLIB_MINOR={- $config{shlib_minor} -} |
| SHLIB_TARGET={- $target{shared_target} -} |
| SHLIB_EXT={- $shlibext -} |
| SHLIB_EXT_SIMPLE={- $shlibextsimple -} |
| SHLIB_EXT_IMPORT={- $shlibextimport -} |
| |
| LIBS={- join(" ", map { lib($_) } @{$unified_info{libraries}}) -} |
| SHLIBS={- join(" ", map { shlib($_) } @{$unified_info{libraries}}) -} |
| SHLIB_INFO={- join(" ", map { "\"".shlib($_).";".shlib_simple($_)."\"" } @{$unified_info{libraries}}) -} |
| ENGINES={- join(" ", map { dso($_) } @{$unified_info{engines}}) -} |
| PROGRAMS={- join(" ", map { $_.$exeext } @{$unified_info{programs}}) -} |
| SCRIPTS={- join(" ", @{$unified_info{scripts}}) -} |
| {- output_off() if $disabled{makedepend}; "" -} |
| DEPS={- join(" ", map { (my $x = $_) =~ s|\.o$|$depext|; $x; } |
| grep { $unified_info{sources}->{$_}->[0] =~ /\.c$/ } |
| keys %{$unified_info{sources}}); -} |
| {- output_on() if $disabled{makedepend}; "" -} |
| GENERATED_MANDATORY={- join(" ", @{$unified_info{depends}->{""}}) -} |
| GENERATED={- # common0.tmpl provides @generated |
| join(" ", @generated ) -} |
| |
| INSTALL_LIBS={- join(" ", map { lib($_) } @{$unified_info{install}->{libraries}}) -} |
| INSTALL_SHLIBS={- join(" ", map { shlib($_) } @{$unified_info{install}->{libraries}}) -} |
| INSTALL_SHLIB_INFO={- join(" ", map { "\"".shlib($_).";".shlib_simple($_)."\"" } @{$unified_info{install}->{libraries}}) -} |
| INSTALL_ENGINES={- join(" ", map { dso($_) } @{$unified_info{install}->{engines}}) -} |
| INSTALL_PROGRAMS={- join(" ", map { $_.$exeext } @{$unified_info{install}->{programs}}) -} |
| {- output_off() if $disabled{apps}; "" -} |
| BIN_SCRIPTS=$(BLDDIR)/tools/c_rehash |
| MISC_SCRIPTS=$(BLDDIR)/apps/CA.pl $(BLDDIR)/apps/tsget |
| {- output_on() if $disabled{apps}; "" -} |
| |
| APPS_OPENSSL={- use File::Spec::Functions; |
| catfile("apps","openssl") -} |
| |
| # DESTDIR is for package builders so that they can configure for, say, |
| # /usr/ and yet have everything installed to /tmp/somedir/usr/. |
| # Normally it is left empty. |
| DESTDIR= |
| |
| # Do not edit these manually. Use Configure with --prefix or --openssldir |
| # to change this! Short explanation in the top comment in Configure |
| INSTALLTOP={- # $prefix is used in the OPENSSLDIR perl snippet |
| # |
| our $prefix = $config{prefix} || "/usr/local"; |
| $prefix -} |
| OPENSSLDIR={- # |
| # The logic here is that if no --openssldir was given, |
| # OPENSSLDIR will get the value from $prefix plus "/ssl". |
| # If --openssldir was given and the value is an absolute |
| # path, OPENSSLDIR will get its value without change. |
| # If the value from --openssldir is a relative path, |
| # OPENSSLDIR will get $prefix with the --openssldir |
| # value appended as a subdirectory. |
| # |
| use File::Spec::Functions; |
| our $openssldir = |
| $config{openssldir} ? |
| (file_name_is_absolute($config{openssldir}) ? |
| $config{openssldir} |
| : catdir($prefix, $config{openssldir})) |
| : catdir($prefix, "ssl"); |
| $openssldir -} |
| LIBDIR={- our $libdir = $config{libdir}; |
| unless ($libdir) { |
| # |
| # if $prefix/lib$target{multilib} is not an existing |
| # directory, then assume that it's not searched by linker |
| # automatically, in which case adding $target{multilib} suffix |
| # causes more grief than we're ready to tolerate, so don't... |
| our $multilib = |
| -d "$prefix/lib$target{multilib}" ? $target{multilib} : ""; |
| $libdir = "lib$multilib"; |
| } |
| file_name_is_absolute($libdir) ? "" : $libdir -} |
| # $(libdir) is chosen to be compatible with the GNU coding standards |
| libdir={- file_name_is_absolute($libdir) |
| ? $libdir : '$(INSTALLTOP)/$(LIBDIR)' -} |
| ENGINESDIR=$(libdir)/engines-{- $sover_dirname -} |
| |
| # Convenience variable for those who want to set the rpath in shared |
| # libraries and applications |
| LIBRPATH=$(libdir) |
| |
| MANDIR=$(INSTALLTOP)/share/man |
| DOCDIR=$(INSTALLTOP)/share/doc/$(BASENAME) |
| HTMLDIR=$(DOCDIR)/html |
| |
| # MANSUFFIX is for the benefit of anyone who may want to have a suffix |
| # appended after the manpage file section number. "ssl" is popular, |
| # resulting in files such as config.5ssl rather than config.5. |
| MANSUFFIX= |
| HTMLSUFFIX=html |
| |
| # For "optional" echo messages, to get "real" silence |
| ECHO = echo |
| |
| ##### User defined commands and flags ################################ |
| |
| # We let the C compiler driver to take care of .s files. This is done in |
| # order to be excused from maintaining a separate set of architecture |
| # dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC |
| # gcc, then the driver will automatically translate it to -xarch=v8plus |
| # and pass it down to assembler. In any case, we do not define AS or |
| # ASFLAGS for this reason. |
| |
| CROSS_COMPILE={- $config{CROSS_COMPILE} -} |
| CC=$(CROSS_COMPILE){- $config{CC} -} |
| CXX={- $config{CXX} ? "\$(CROSS_COMPILE)$config{CXX}" : '' -} |
| CPPFLAGS={- our $cppflags1 = join(" ", |
| (map { "-D".$_} @{$config{CPPDEFINES}}), |
| (map { "-I".$_} @{$config{CPPINCLUDES}}), |
| @{$config{CPPFLAGS}}) -} |
| CFLAGS={- join(' ', @{$config{CFLAGS}}) -} |
| CXXFLAGS={- join(' ', @{$config{CXXFLAGS}}) -} |
| LDFLAGS= {- join(' ', @{$config{LDFLAGS}}) -} |
| EX_LIBS= {- join(' ', @{$config{LDLIBS}}) -} |
| |
| MAKEDEPEND={- $config{makedepprog} -} |
| |
| PERL={- $config{perl} -} |
| |
| AR=$(CROSS_COMPILE){- $config{AR} -} |
| ARFLAGS= {- join(' ', @{$config{ARFLAGS}}) -} |
| RANLIB={- $config{RANLIB} ? "\$(CROSS_COMPILE)$config{RANLIB}" : "true"; -} |
| RC= $(CROSS_COMPILE){- $config{RC} -} |
| RCFLAGS={- join(' ', @{$config{RCFLAGS}}) -} {- $target{shared_rcflag} -} |
| |
| RM= rm -f |
| RMDIR= rmdir |
| TAR= {- $target{TAR} || "tar" -} |
| TARFLAGS= {- $target{TARFLAGS} -} |
| |
| BASENAME= openssl |
| NAME= $(BASENAME)-$(VERSION) |
| TARFILE= ../$(NAME).tar |
| |
| ##### Project flags ################################################## |
| |
| # Variables starting with CNF_ are common variables for all product types |
| |
| CNF_CPPFLAGS={- our $cppflags2 = |
| join(' ', $target{cppflags} || (), |
| (map { "-D".$_} @{$target{defines}}, |
| @{$config{defines}}), |
| (map { "-I".$_} @{$target{includes}}, |
| @{$config{includes}}), |
| @{$config{cppflags}}) -} |
| CNF_CFLAGS={- join(' ', $target{cflags} || (), |
| @{$config{cflags}}) -} |
| CNF_CXXFLAGS={- join(' ', $target{cxxflags} || (), |
| @{$config{cxxflags}}) -} |
| CNF_LDFLAGS={- join(' ', $target{lflags} || (), |
| @{$config{lflags}}) -} |
| CNF_EX_LIBS={- join(' ', $target{ex_libs} || (), |
| @{$config{ex_libs}}) -} |
| |
| # Variables starting with LIB_ are used to build library object files |
| # and shared libraries. |
| # Variables starting with DSO_ are used to build DSOs and their object files. |
| # Variables starting with BIN_ are used to build programs and their object |
| # files. |
| |
| LIB_CPPFLAGS={- our $lib_cppflags = |
| join(' ', $target{lib_cppflags} || (), |
| $target{shared_cppflag} || (), |
| (map { '-D'.$_ } |
| @{$config{lib_defines}}, |
| @{$config{shared_defines}}), |
| @{$config{lib_cppflags}}, |
| @{$config{shared_cppflag}}); |
| join(' ', $lib_cppflags, |
| (map { '-D'.$_ } |
| 'OPENSSLDIR="\"$(OPENSSLDIR)\""', |
| 'ENGINESDIR="\"$(ENGINESDIR)\""'), |
| '$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -} |
| LIB_CFLAGS={- join(' ', $target{lib_cflags} || (), |
| $target{shared_cflag} || (), |
| @{$config{lib_cflags}}, |
| @{$config{shared_cflag}}, |
| '$(CNF_CFLAGS)', '$(CFLAGS)') -} |
| LIB_CXXFLAGS={- join(' ', $target{lib_cxxflags} || (), |
| $target{shared_cxxflag} || (), |
| @{$config{lib_cxxflags}}, |
| @{$config{shared_cxxflag}}, |
| '$(CNF_CXXFLAGS)', '$(CXXFLAGS)') -} |
| LIB_LDFLAGS={- join(' ', $target{shared_ldflag} || (), |
| $config{shared_ldflag} || (), |
| '$(CNF_LDFLAGS)', '$(LDFLAGS)') -} |
| LIB_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS) |
| DSO_CPPFLAGS={- join(' ', $target{dso_cppflags} || (), |
| $target{module_cppflags} || (), |
| @{$config{dso_cppflags}}, |
| @{$config{module_cppflags}}, |
| '$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -} |
| DSO_CFLAGS={- join(' ', $target{dso_cflags} || (), |
| $target{module_cflags} || (), |
| @{$config{dso_cflags}}, |
| @{$config{module_cflags}}, |
| '$(CNF_CFLAGS)', '$(CFLAGS)') -} |
| DSO_CXXFLAGS={- join(' ', $target{dso_cxxflags} || (), |
| $target{module_cxxflags} || (), |
| @{$config{dso_cxxflags}}, |
| @{$config{module_cxxflag}}, |
| '$(CNF_CXXFLAGS)', '$(CXXFLAGS)') -} |
| DSO_LDFLAGS={- join(' ', $target{dso_ldflags} || (), |
| $target{module_ldflags} || (), |
| @{$config{dso_ldflags}}, |
| @{$config{module_ldflags}}, |
| '$(CNF_LDFLAGS)', '$(LDFLAGS)') -} |
| DSO_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS) |
| BIN_CPPFLAGS={- join(' ', $target{bin_cppflags} || (), |
| @{$config{bin_cppflags}}, |
| '$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -} |
| BIN_CFLAGS={- join(' ', $target{bin_cflags} || (), |
| @{$config{bin_cflags}}, |
| '$(CNF_CFLAGS)', '$(CFLAGS)') -} |
| BIN_CXXFLAGS={- join(' ', $target{bin_cxxflags} || (), |
| @{$config{bin_cxxflags}}, |
| '$(CNF_CXXFLAGS)', '$(CXXFLAGS)') -} |
| BIN_LDFLAGS={- join(' ', $target{bin_lflags} || (), |
| @{$config{bin_lflags}}, |
| '$(CNF_LDFLAGS)', '$(LDFLAGS)') -} |
| BIN_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS) |
| |
| # CPPFLAGS_Q is used for one thing only: to build up buildinf.h |
| CPPFLAGS_Q={- $cppflags1 =~ s|([\\"])|\\$1|g; |
| $cppflags2 =~ s|([\\"])|\\$1|g; |
| $lib_cppflags =~ s|([\\"])|\\$1|g; |
| join(' ', $lib_cppflags || (), $cppflags2 || (), |
| $cppflags1 || ()) -} |
| |
| PERLASM_SCHEME= {- $target{perlasm_scheme} -} |
| |
| # For x86 assembler: Set PROCESSOR to 386 if you want to support |
| # the 80386. |
| PROCESSOR= {- $config{processor} -} |
| |
| # We want error [and other] messages in English. Trouble is that make(1) |
| # doesn't pass macros down as environment variables unless there already |
| # was corresponding variable originally set. In other words we can only |
| # reassign environment variables, but not set new ones, not in portable |
| # manner that is. That's why we reassign several, just to be sure... |
| LC_ALL=C |
| LC_MESSAGES=C |
| LANG=C |
| |
| # The main targets ################################################### |
| |
| {- dependmagic('all'); -}: build_libs_nodep build_engines_nodep build_programs_nodep link-utils |
| {- dependmagic('build_libs'); -}: build_libs_nodep |
| {- dependmagic('build_engines'); -}: build_engines_nodep |
| {- dependmagic('build_programs'); -}: build_programs_nodep |
| |
| build_generated: $(GENERATED_MANDATORY) |
| build_libs_nodep: libcrypto.pc libssl.pc openssl.pc |
| build_engines_nodep: $(ENGINES) |
| build_programs_nodep: $(PROGRAMS) $(SCRIPTS) |
| |
| # Kept around for backward compatibility |
| build_apps build_tests: build_programs |
| |
| # Convenience target to prebuild all generated files, not just the mandatory |
| # ones |
| build_all_generated: $(GENERATED_MANDATORY) $(GENERATED) |
| @ : {- output_off() if $disabled{makedepend}; "" -} |
| @echo "Warning: consider configuring with no-makedepend, because if" |
| @echo " target system doesn't have $(PERL)," |
| @echo " then make will fail..." |
| @ : {- output_on() if $disabled{makedepend}; "" -} |
| |
| test: tests |
| {- dependmagic('tests'); -}: build_programs_nodep build_engines_nodep link-utils |
| @ : {- output_off() if $disabled{tests}; "" -} |
| ( cd test; \ |
| mkdir -p test-runs; \ |
| SRCTOP=../$(SRCDIR) \ |
| BLDTOP=../$(BLDDIR) \ |
| RESULT_D=test-runs \ |
| PERL="$(PERL)" \ |
| EXE_EXT={- $exeext -} \ |
| OPENSSL_ENGINES=`cd ../$(BLDDIR)/engines 2>/dev/null && pwd` \ |
| OPENSSL_DEBUG_MEMORY=on \ |
| $(PERL) ../$(SRCDIR)/test/run_tests.pl $(TESTS) ) |
| @ : {- if ($disabled{tests}) { output_on(); } else { output_off(); } "" -} |
| @echo "Tests are not supported with your chosen Configure options" |
| @ : {- output_on() if !$disabled{tests}; "" -} |
| |
| list-tests: |
| @ : {- output_off() if $disabled{tests}; "" -} |
| @SRCTOP="$(SRCDIR)" \ |
| $(PERL) $(SRCDIR)/test/run_tests.pl list |
| @ : {- if ($disabled{tests}) { output_on(); } else { output_off(); } "" -} |
| @echo "Tests are not supported with your chosen Configure options" |
| @ : {- output_on() if !$disabled{tests}; "" -} |
| |
| install: install_sw install_ssldirs install_docs |
| |
| uninstall: uninstall_docs uninstall_sw |
| |
| libclean: |
| @set -e; for s in $(SHLIB_INFO); do \ |
| if [ "$$s" = ";" ]; then continue; fi; \ |
| s1=`echo "$$s" | cut -f1 -d";"`; \ |
| s2=`echo "$$s" | cut -f2 -d";"`; \ |
| $(ECHO) $(RM) $$s1; {- output_off() unless windowsdll(); "" -}\ |
| $(RM) apps/$$s1; \ |
| $(RM) test/$$s1; \ |
| $(RM) fuzz/$$s1; {- output_on() unless windowsdll(); "" -}\ |
| $(RM) $$s1; \ |
| if [ "$$s1" != "$$s2" ]; then \ |
| $(ECHO) $(RM) $$s2; \ |
| $(RM) $$s2; \ |
| fi; \ |
| done |
| $(RM) $(LIBS) |
| $(RM) *.map |
| |
| clean: libclean |
| $(RM) $(PROGRAMS) $(TESTPROGS) $(ENGINES) $(SCRIPTS) |
| $(RM) $(GENERATED_MANDATORY) $(GENERATED) |
| -$(RM) `find . -name '*{- $depext -}' -a \! -path "./.git/*"` |
| -$(RM) `find . -name '*{- $objext -}' -a \! -path "./.git/*"` |
| $(RM) core |
| $(RM) tags TAGS doc-nits |
| $(RM) -r test/test-runs |
| $(RM) openssl.pc libcrypto.pc libssl.pc |
| -$(RM) `find . -type l -a \! -path "./.git/*"` |
| $(RM) $(TARFILE) |
| |
| distclean: clean |
| $(RM) configdata.pm |
| $(RM) Makefile |
| |
| # We check if any depfile is newer than Makefile and decide to |
| # concatenate only if that is true. |
| depend: |
| @: {- output_off() if $disabled{makedepend}; "" -} |
| @$(PERL) $(SRCDIR)/util/add-depends.pl {- |
| defined $makedepprog && $makedepprog =~ /\/makedepend/ |
| ? 'makedepend' : 'gcc' -} |
| @: {- output_on() if $disabled{makedepend}; "" -} |
| |
| # Install helper targets ############################################# |
| |
| install_sw: all install_dev install_engines install_runtime |
| |
| uninstall_sw: uninstall_runtime uninstall_engines uninstall_dev |
| |
| install_docs: install_man_docs install_html_docs |
| |
| uninstall_docs: uninstall_man_docs uninstall_html_docs |
| $(RM) -r -v $(DESTDIR)$(DOCDIR) |
| |
| install_ssldirs: |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/certs |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/private |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/misc |
| @set -e; for x in dummy $(MISC_SCRIPTS); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(OPENSSLDIR)/misc/$$fn"; \ |
| cp $$x $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new; \ |
| chmod 755 $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new; \ |
| mv -f $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new \ |
| $(DESTDIR)$(OPENSSLDIR)/misc/$$fn; \ |
| done |
| @$(ECHO) "install $(SRCDIR)/apps/openssl.cnf -> $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.dist" |
| @cp $(SRCDIR)/apps/openssl.cnf $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new |
| @chmod 644 $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new |
| @mv -f $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.dist |
| @if [ ! -f "$(DESTDIR)$(OPENSSLDIR)/openssl.cnf" ]; then \ |
| $(ECHO) "install $(SRCDIR)/apps/openssl.cnf -> $(DESTDIR)$(OPENSSLDIR)/openssl.cnf"; \ |
| cp $(SRCDIR)/apps/openssl.cnf $(DESTDIR)$(OPENSSLDIR)/openssl.cnf; \ |
| chmod 644 $(DESTDIR)$(OPENSSLDIR)/openssl.cnf; \ |
| fi |
| @$(ECHO) "install $(SRCDIR)/apps/ct_log_list.cnf -> $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.dist" |
| @cp $(SRCDIR)/apps/ct_log_list.cnf $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.new |
| @chmod 644 $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.new |
| @mv -f $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.new $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.dist |
| @if [ ! -f "$(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf" ]; then \ |
| $(ECHO) "install $(SRCDIR)/apps/ct_log_list.cnf -> $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf"; \ |
| cp $(SRCDIR)/apps/ct_log_list.cnf $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf; \ |
| chmod 644 $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf; \ |
| fi |
| |
| install_dev: |
| @[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1) |
| @$(ECHO) "*** Installing development files" |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/include/openssl |
| @ : {- output_off() unless grep { $_ eq "OPENSSL_USE_APPLINK" } @{$target{defines}}; "" -} |
| @$(ECHO) "install $(SRCDIR)/ms/applink.c -> $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c" |
| @cp $(SRCDIR)/ms/applink.c $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c |
| @chmod 644 $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c |
| @ : {- output_on() unless grep { $_ eq "OPENSSL_USE_APPLINK" } @{$target{defines}}; "" -} |
| @set -e; for i in $(SRCDIR)/include/openssl/*.h \ |
| $(BLDDIR)/include/openssl/*.h; do \ |
| fn=`basename $$i`; \ |
| $(ECHO) "install $$i -> $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn"; \ |
| cp $$i $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \ |
| chmod 644 $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \ |
| done |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(libdir) |
| @set -e; for l in $(INSTALL_LIBS); do \ |
| fn=`basename $$l`; \ |
| $(ECHO) "install $$l -> $(DESTDIR)$(libdir)/$$fn"; \ |
| cp $$l $(DESTDIR)$(libdir)/$$fn.new; \ |
| $(RANLIB) $(DESTDIR)$(libdir)/$$fn.new; \ |
| chmod 644 $(DESTDIR)$(libdir)/$$fn.new; \ |
| mv -f $(DESTDIR)$(libdir)/$$fn.new \ |
| $(DESTDIR)$(libdir)/$$fn; \ |
| done |
| @ : {- output_off() if $disabled{shared}; "" -} |
| @set -e; for s in $(INSTALL_SHLIB_INFO); do \ |
| s1=`echo "$$s" | cut -f1 -d";"`; \ |
| s2=`echo "$$s" | cut -f2 -d";"`; \ |
| fn1=`basename $$s1`; \ |
| fn2=`basename $$s2`; \ |
| : {- output_off() if windowsdll(); "" -}; \ |
| $(ECHO) "install $$s1 -> $(DESTDIR)$(libdir)/$$fn1"; \ |
| cp $$s1 $(DESTDIR)$(libdir)/$$fn1.new; \ |
| chmod 755 $(DESTDIR)$(libdir)/$$fn1.new; \ |
| mv -f $(DESTDIR)$(libdir)/$$fn1.new \ |
| $(DESTDIR)$(libdir)/$$fn1; \ |
| if [ "$$fn1" != "$$fn2" ]; then \ |
| $(ECHO) "link $(DESTDIR)$(libdir)/$$fn2 -> $(DESTDIR)$(libdir)/$$fn1"; \ |
| ln -sf $$fn1 $(DESTDIR)$(libdir)/$$fn2; \ |
| fi; \ |
| : {- output_on() if windowsdll(); "" -}{- output_off() unless windowsdll(); "" -}; \ |
| $(ECHO) "install $$s2 -> $(DESTDIR)$(libdir)/$$fn2"; \ |
| cp $$s2 $(DESTDIR)$(libdir)/$$fn2.new; \ |
| chmod 755 $(DESTDIR)$(libdir)/$$fn2.new; \ |
| mv -f $(DESTDIR)$(libdir)/$$fn2.new \ |
| $(DESTDIR)$(libdir)/$$fn2; \ |
| : {- output_on() unless windowsdll(); "" -}; \ |
| done |
| @ : {- output_on() if $disabled{shared}; "" -} |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(libdir)/pkgconfig |
| @$(ECHO) "install libcrypto.pc -> $(DESTDIR)$(libdir)/pkgconfig/libcrypto.pc" |
| @cp libcrypto.pc $(DESTDIR)$(libdir)/pkgconfig |
| @chmod 644 $(DESTDIR)$(libdir)/pkgconfig/libcrypto.pc |
| @$(ECHO) "install libssl.pc -> $(DESTDIR)$(libdir)/pkgconfig/libssl.pc" |
| @cp libssl.pc $(DESTDIR)$(libdir)/pkgconfig |
| @chmod 644 $(DESTDIR)$(libdir)/pkgconfig/libssl.pc |
| @$(ECHO) "install openssl.pc -> $(DESTDIR)$(libdir)/pkgconfig/openssl.pc" |
| @cp openssl.pc $(DESTDIR)$(libdir)/pkgconfig |
| @chmod 644 $(DESTDIR)$(libdir)/pkgconfig/openssl.pc |
| |
| uninstall_dev: |
| @$(ECHO) "*** Uninstalling development files" |
| @ : {- output_off() unless grep { $_ eq "OPENSSL_USE_APPLINK" } @{$target{defines}}; "" -} |
| @$(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c" |
| @$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c |
| @ : {- output_on() unless grep { $_ eq "OPENSSL_USE_APPLINK" } @{$target{defines}}; "" -} |
| @set -e; for i in $(SRCDIR)/include/openssl/*.h \ |
| $(BLDDIR)/include/openssl/*.h; do \ |
| fn=`basename $$i`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn"; \ |
| $(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \ |
| done |
| -$(RMDIR) $(DESTDIR)$(INSTALLTOP)/include/openssl |
| -$(RMDIR) $(DESTDIR)$(INSTALLTOP)/include |
| @set -e; for l in $(INSTALL_LIBS); do \ |
| fn=`basename $$l`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn"; \ |
| $(RM) $(DESTDIR)$(libdir)/$$fn; \ |
| done |
| @ : {- output_off() if $disabled{shared}; "" -} |
| @set -e; for s in $(INSTALL_SHLIB_INFO); do \ |
| s1=`echo "$$s" | cut -f1 -d";"`; \ |
| s2=`echo "$$s" | cut -f2 -d";"`; \ |
| fn1=`basename $$s1`; \ |
| fn2=`basename $$s2`; \ |
| : {- output_off() if windowsdll(); "" -}; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn1"; \ |
| $(RM) $(DESTDIR)$(libdir)/$$fn1; \ |
| if [ "$$fn1" != "$$fn2" ]; then \ |
| $(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn2"; \ |
| $(RM) $(DESTDIR)$(libdir)/$$fn2; \ |
| fi; \ |
| : {- output_on() if windowsdll(); "" -}{- output_off() unless windowsdll(); "" -}; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn2"; \ |
| $(RM) $(DESTDIR)$(libdir)/$$fn2; \ |
| : {- output_on() unless windowsdll(); "" -}; \ |
| done |
| @ : {- output_on() if $disabled{shared}; "" -} |
| $(RM) $(DESTDIR)$(libdir)/pkgconfig/libcrypto.pc |
| $(RM) $(DESTDIR)$(libdir)/pkgconfig/libssl.pc |
| $(RM) $(DESTDIR)$(libdir)/pkgconfig/openssl.pc |
| -$(RMDIR) $(DESTDIR)$(libdir)/pkgconfig |
| -$(RMDIR) $(DESTDIR)$(libdir) |
| |
| install_engines: |
| @[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1) |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(ENGINESDIR)/ |
| @$(ECHO) "*** Installing engines" |
| @set -e; for e in dummy $(INSTALL_ENGINES); do \ |
| if [ "$$e" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$e`; \ |
| $(ECHO) "install $$e -> $(DESTDIR)$(ENGINESDIR)/$$fn"; \ |
| cp $$e $(DESTDIR)$(ENGINESDIR)/$$fn.new; \ |
| chmod 755 $(DESTDIR)$(ENGINESDIR)/$$fn.new; \ |
| mv -f $(DESTDIR)$(ENGINESDIR)/$$fn.new \ |
| $(DESTDIR)$(ENGINESDIR)/$$fn; \ |
| done |
| |
| uninstall_engines: |
| @$(ECHO) "*** Uninstalling engines" |
| @set -e; for e in dummy $(INSTALL_ENGINES); do \ |
| if [ "$$e" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$e`; \ |
| if [ "$$fn" = '{- dso("ossltest") -}' ]; then \ |
| continue; \ |
| fi; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(ENGINESDIR)/$$fn"; \ |
| $(RM) $(DESTDIR)$(ENGINESDIR)/$$fn; \ |
| done |
| -$(RMDIR) $(DESTDIR)$(ENGINESDIR) |
| |
| install_runtime: |
| @[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1) |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/bin |
| @ : {- output_off() if windowsdll(); "" -} |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(libdir) |
| @ : {- output_on() if windowsdll(); "" -} |
| @$(ECHO) "*** Installing runtime files" |
| @set -e; for s in dummy $(INSTALL_SHLIBS); do \ |
| if [ "$$s" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$s`; \ |
| : {- output_off() unless windowsdll(); "" -}; \ |
| $(ECHO) "install $$s -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \ |
| cp $$s $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \ |
| chmod 644 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \ |
| mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \ |
| $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \ |
| : {- output_on() unless windowsdll(); "" -}{- output_off() if windowsdll(); "" -}; \ |
| $(ECHO) "install $$s -> $(DESTDIR)$(libdir)/$$fn"; \ |
| cp $$s $(DESTDIR)$(libdir)/$$fn.new; \ |
| chmod 755 $(DESTDIR)$(libdir)/$$fn.new; \ |
| mv -f $(DESTDIR)$(libdir)/$$fn.new \ |
| $(DESTDIR)$(libdir)/$$fn; \ |
| : {- output_on() if windowsdll(); "" -}; \ |
| done |
| @set -e; for x in dummy $(INSTALL_PROGRAMS); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \ |
| cp $$x $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \ |
| chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \ |
| mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \ |
| $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \ |
| done |
| @set -e; for x in dummy $(BIN_SCRIPTS); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \ |
| cp $$x $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \ |
| chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \ |
| mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \ |
| $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \ |
| done |
| |
| uninstall_runtime: |
| @$(ECHO) "*** Uninstalling runtime files" |
| @set -e; for x in dummy $(INSTALL_PROGRAMS); \ |
| do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \ |
| $(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \ |
| done; |
| @set -e; for x in dummy $(BIN_SCRIPTS); \ |
| do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \ |
| $(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \ |
| done |
| @ : {- output_off() unless windowsdll(); "" -} |
| @set -e; for s in dummy $(INSTALL_SHLIBS); do \ |
| if [ "$$s" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$s`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \ |
| $(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \ |
| done |
| @ : {- output_on() unless windowsdll(); "" -} |
| -$(RMDIR) $(DESTDIR)$(INSTALLTOP)/bin |
| |
| |
| install_man_docs: |
| @[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1) |
| @$(ECHO) "*** Installing manpages" |
| $(PERL) $(SRCDIR)/util/process_docs.pl \ |
| --destdir=$(DESTDIR)$(MANDIR) --type=man --suffix=$(MANSUFFIX) |
| |
| uninstall_man_docs: |
| @$(ECHO) "*** Uninstalling manpages" |
| $(PERL) $(SRCDIR)/util/process_docs.pl \ |
| --destdir=$(DESTDIR)$(MANDIR) --type=man --suffix=$(MANSUFFIX) \ |
| --remove |
| |
| install_html_docs: |
| @[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1) |
| @$(ECHO) "*** Installing HTML manpages" |
| $(PERL) $(SRCDIR)/util/process_docs.pl \ |
| --destdir=$(DESTDIR)$(HTMLDIR) --type=html |
| |
| uninstall_html_docs: |
| @$(ECHO) "*** Uninstalling manpages" |
| $(PERL) $(SRCDIR)/util/process_docs.pl \ |
| --destdir=$(DESTDIR)$(HTMLDIR) --type=html --remove |
| |
| |
| # Developer targets (note: these are only available on Unix) ######### |
| |
| update: generate errors ordinals |
| |
| generate: generate_apps generate_crypto_bn generate_crypto_objects \ |
| generate_crypto_conf generate_crypto_asn1 generate_fuzz_oids |
| |
| doc-nits: |
| (cd $(SRCDIR); $(PERL) util/find-doc-nits -n -p ) >doc-nits |
| if [ -s doc-nits ] ; then cat doc-nits; rm doc-nits ; exit 1; fi |
| |
| # Test coverage is a good idea for the future |
| #coverage: $(PROGRAMS) $(TESTPROGRAMS) |
| # ... |
| |
| lint: |
| lint -DLINT $(INCLUDES) $(SRCS) |
| |
| generate_apps: |
| ( cd $(SRCDIR); $(PERL) VMS/VMSify-conf.pl \ |
| < apps/openssl.cnf > apps/openssl-vms.cnf ) |
| |
| generate_crypto_bn: |
| ( cd $(SRCDIR); $(PERL) crypto/bn/bn_prime.pl > crypto/bn/bn_prime.h ) |
| |
| generate_crypto_objects: |
| ( cd $(SRCDIR); $(PERL) crypto/objects/objects.pl -n \ |
| crypto/objects/objects.txt \ |
| crypto/objects/obj_mac.num \ |
| > crypto/objects/obj_mac.new && \ |
| mv crypto/objects/obj_mac.new crypto/objects/obj_mac.num ) |
| ( cd $(SRCDIR); $(PERL) crypto/objects/objects.pl \ |
| crypto/objects/objects.txt \ |
| crypto/objects/obj_mac.num \ |
| > include/openssl/obj_mac.h ) |
| ( cd $(SRCDIR); $(PERL) crypto/objects/obj_dat.pl \ |
| include/openssl/obj_mac.h \ |
| > crypto/objects/obj_dat.h ) |
| ( cd $(SRCDIR); $(PERL) crypto/objects/objxref.pl \ |
| crypto/objects/obj_mac.num \ |
| crypto/objects/obj_xref.txt \ |
| > crypto/objects/obj_xref.h ) |
| |
| generate_crypto_conf: |
| ( cd $(SRCDIR); $(PERL) crypto/conf/keysets.pl \ |
| > crypto/conf/conf_def.h ) |
| |
| generate_crypto_asn1: |
| ( cd $(SRCDIR); $(PERL) crypto/asn1/charmap.pl \ |
| > crypto/asn1/charmap.h ) |
| |
| generate_fuzz_oids: |
| ( cd $(SRCDIR); $(PERL) fuzz/mkfuzzoids.pl \ |
| crypto/objects/obj_dat.h \ |
| > fuzz/oids.txt ) |
| |
| # Set to -force to force a rebuild |
| ERROR_REBUILD= |
| errors: |
| ( cd $(SRCDIR); $(PERL) util/ck_errf.pl -strict */*.c */*/*.c ) |
| ( b=`pwd`; cd $(SRCDIR); \ |
| $(PERL) -I$$b util/mkerr.pl $(ERROR_REBUILD) -internal ) |
| ( b=`pwd`; cd $(SRCDIR)/engines; \ |
| for E in *.ec ; do \ |
| $(PERL) -I$$b ../util/mkerr.pl $(ERROR_REBUILD) -static \ |
| -conf $$E `basename $$E .ec`.c ; \ |
| done ) |
| |
| ordinals: |
| ( b=`pwd`; cd $(SRCDIR); $(PERL) -I$$b util/mkdef.pl crypto update ) |
| ( b=`pwd`; cd $(SRCDIR); $(PERL) -I$$b util/mkdef.pl ssl update ) |
| |
| test_ordinals: |
| ( cd test; \ |
| SRCTOP=../$(SRCDIR) \ |
| BLDTOP=../$(BLDDIR) \ |
| $(PERL) ../$(SRCDIR)/test/run_tests.pl test_ordinals ) |
| |
| tags TAGS: FORCE |
| rm -f TAGS tags |
| -ctags -R . |
| -etags `find . -name '*.[ch]' -o -name '*.pm'` |
| |
| # Release targets (note: only available on Unix) ##################### |
| |
| # If your tar command doesn't support --owner and --group, make sure to |
| # use one that does, for example GNU tar |
| TAR_COMMAND=$(TAR) $(TARFLAGS) --owner 0 --group 0 -cf - |
| PREPARE_CMD=: |
| tar: |
| set -e; \ |
| TMPDIR=/var/tmp/openssl-copy.$$$$; \ |
| DISTDIR=$(NAME); \ |
| mkdir -p $$TMPDIR/$$DISTDIR; \ |
| (cd $(SRCDIR); \ |
| excl_re=`git submodule status | sed -e 's/^.//' | cut -d' ' -f2`; \ |
| excl_re="^(fuzz/corpora|Configurations/.*\.norelease\.conf|`echo $$excl_re | sed -e 's/ /$$|/g'`\$$)"; \ |
| echo "$$excl_re"; \ |
| git ls-tree -r --name-only --full-tree HEAD \ |
| | egrep -v "$$excl_re" \ |
| | while read F; do \ |
| mkdir -p $$TMPDIR/$$DISTDIR/`dirname $$F`; \ |
| cp $$F $$TMPDIR/$$DISTDIR/$$F; \ |
| done); \ |
| (cd $$TMPDIR/$$DISTDIR; \ |
| $(PREPARE_CMD); \ |
| find . -type d -print | xargs chmod 755; \ |
| find . -type f -print | xargs chmod a+r; \ |
| find . -type f -perm -0100 -print | xargs chmod a+x); \ |
| (cd $$TMPDIR; $(TAR_COMMAND) $$DISTDIR) \ |
| | (cd $(SRCDIR); gzip --best > $(TARFILE).gz); \ |
| rm -rf $$TMPDIR |
| cd $(SRCDIR); ls -l $(TARFILE).gz |
| |
| dist: |
| @$(MAKE) PREPARE_CMD='$(PERL) ./Configure dist' TARFILE="$(TARFILE)" NAME="$(NAME)" tar |
| |
| # Helper targets ##################################################### |
| |
| link-utils: $(BLDDIR)/util/opensslwrap.sh |
| |
| $(BLDDIR)/util/opensslwrap.sh: configdata.pm |
| @if [ "$(SRCDIR)" != "$(BLDDIR)" ]; then \ |
| mkdir -p "$(BLDDIR)/util"; \ |
| ln -sf "../$(SRCDIR)/util/opensslwrap.sh" "$(BLDDIR)/util"; \ |
| fi |
| |
| FORCE: |
| |
| # Building targets ################################################### |
| |
| libcrypto.pc libssl.pc openssl.pc: configdata.pm $(LIBS) {- join(" ",map { shlib_simple($_) } @{$unified_info{libraries}}) -} |
| libcrypto.pc: |
| @ ( echo 'prefix=$(INSTALLTOP)'; \ |
| echo 'exec_prefix=$${prefix}'; \ |
| if [ -n "$(LIBDIR)" ]; then \ |
| echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \ |
| else \ |
| echo 'libdir=$(libdir)'; \ |
| fi; \ |
| echo 'includedir=$${prefix}/include'; \ |
| echo 'enginesdir=$${libdir}/engines-{- $sover_dirname -}'; \ |
| echo ''; \ |
| echo 'Name: OpenSSL-libcrypto'; \ |
| echo 'Description: OpenSSL cryptography library'; \ |
| echo 'Version: '$(VERSION); \ |
| echo 'Libs: -L$${libdir} -lcrypto'; \ |
| echo 'Libs.private: $(LIB_EX_LIBS)'; \ |
| echo 'Cflags: -I$${includedir}' ) > libcrypto.pc |
| |
| libssl.pc: |
| @ ( echo 'prefix=$(INSTALLTOP)'; \ |
| echo 'exec_prefix=$${prefix}'; \ |
| if [ -n "$(LIBDIR)" ]; then \ |
| echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \ |
| else \ |
| echo 'libdir=$(libdir)'; \ |
| fi; \ |
| echo 'includedir=$${prefix}/include'; \ |
| echo ''; \ |
| echo 'Name: OpenSSL-libssl'; \ |
| echo 'Description: Secure Sockets Layer and cryptography libraries'; \ |
| echo 'Version: '$(VERSION); \ |
| echo 'Requires.private: libcrypto'; \ |
| echo 'Libs: -L$${libdir} -lssl'; \ |
| echo 'Cflags: -I$${includedir}' ) > libssl.pc |
| |
| openssl.pc: |
| @ ( echo 'prefix=$(INSTALLTOP)'; \ |
| echo 'exec_prefix=$${prefix}'; \ |
| if [ -n "$(LIBDIR)" ]; then \ |
| echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \ |
| else \ |
| echo 'libdir=$(libdir)'; \ |
| fi; \ |
| echo 'includedir=$${prefix}/include'; \ |
| echo ''; \ |
| echo 'Name: OpenSSL'; \ |
| echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \ |
| echo 'Version: '$(VERSION); \ |
| echo 'Requires: libssl libcrypto' ) > openssl.pc |
| |
| configdata.pm: $(SRCDIR)/Configure $(SRCDIR)/config {- join(" ", @{$config{build_file_templates}}, @{$config{build_infos}}, @{$config{conf_files}}) -} |
| @echo "Detected changed: $?" |
| $(PERL) configdata.pm -r |
| @echo "**************************************************" |
| @echo "*** ***" |
| @echo "*** Please run the same make command again ***" |
| @echo "*** ***" |
| @echo "**************************************************" |
| @false |
| |
| reconfigure reconf: |
| $(PERL) configdata.pm -r |
| |
| {- |
| use File::Basename; |
| use File::Spec::Functions qw/:DEFAULT abs2rel rel2abs/; |
| |
| # Helper function to figure out dependencies on libraries |
| # It takes a list of library names and outputs a list of dependencies |
| sub compute_lib_depends { |
| if ($disabled{shared}) { |
| return map { lib($_) } @_; |
| } |
| |
| # Depending on shared libraries: |
| # On Windows POSIX layers, we depend on {libname}.dll.a |
| # On Unix platforms, we depend on {shlibname}.so |
| return map { $_ =~ /\.a$/ ? $`.$libext : shlib_simple($_) } @_; |
| } |
| |
| sub generatesrc { |
| my %args = @_; |
| my $generator = join(" ", @{$args{generator}}); |
| my $generator_incs = join("", map { " -I".$_ } @{$args{generator_incs}}); |
| my $incs = join("", map { " -I".$_ } @{$args{incs}}); |
| my $deps = join(" ", @{$args{generator_deps}}, @{$args{deps}}); |
| |
| if ($args{src} !~ /\.[sS]$/) { |
| if ($args{generator}->[0] =~ m|^.*\.in$|) { |
| my $dofile = abs2rel(rel2abs(catfile($config{sourcedir}, |
| "util", "dofile.pl")), |
| rel2abs($config{builddir})); |
| return <<"EOF"; |
| $args{src}: $args{generator}->[0] $deps |
| \$(PERL) "-I\$(BLDDIR)" -Mconfigdata "$dofile" \\ |
| "-o$target{build_file}" $generator > \$@ |
| EOF |
| } else { |
| return <<"EOF"; |
| $args{src}: $args{generator}->[0] $deps |
| \$(PERL)$generator_incs $generator > \$@ |
| EOF |
| } |
| } else { |
| if ($args{generator}->[0] =~ /\.pl$/) { |
| $generator = 'CC="$(CC)" $(PERL)'.$generator_incs.' '.$generator; |
| } elsif ($args{generator}->[0] =~ /\.m4$/) { |
| $generator = 'm4 -B 8192'.$generator_incs.' '.$generator.' >' |
| } elsif ($args{generator}->[0] =~ /\.S$/) { |
| $generator = undef; |
| } else { |
| die "Generator type for $args{src} unknown: $generator\n"; |
| } |
| |
| my $cppflags = { |
| lib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)', |
| dso => '$(DSO_CFLAGS) $(DSO_CPPFLAGS)', |
| bin => '$(BIN_CFLAGS) $(BIN_CPPFLAGS)' |
| } -> {$args{intent}}; |
| if (defined($generator)) { |
| return <<"EOF"; |
| $args{src}: $args{generator}->[0] $deps |
| $generator \$@ |
| EOF |
| } |
| return <<"EOF"; |
| $args{src}: $args{generator}->[0] $deps |
| \$(CC) $incs $cppflags -E $args{generator}->[0] | \\ |
| \$(PERL) -ne '/^#(line)?\\s*[0-9]+/ or print' > \$@ |
| EOF |
| } |
| } |
| |
| # Should one wonder about the end of the Perl snippet, it's because this |
| # second regexp eats up line endings as well, if the removed path is the |
| # last in the line. We may therefore need to put back a line ending. |
| sub src2obj { |
| my %args = @_; |
| (my $obj = $args{obj}) =~ s|\.o$||; |
| my @srcs = @{$args{srcs}}; |
| my $srcs = join(" ", @srcs); |
| my $deps = join(" ", @srcs, @{$args{deps}}); |
| my $incs = join("", map { " -I".$_ } @{$args{incs}}); |
| my $cmd; |
| my $cmdflags; |
| my $cmdcompile; |
| if (grep /\.rc$/, @srcs) { |
| $cmd = '$(RC)'; |
| $cmdflags = '$(RCFLAGS)'; |
| $cmdcompile = ''; |
| } elsif (grep /\.(cc|cpp)$/, @srcs) { |
| $cmd = '$(CXX)'; |
| $cmdcompile = ' -c'; |
| $cmdflags = { |
| lib => '$(LIB_CXXFLAGS) $(LIB_CPPFLAGS)', |
| dso => '$(DSO_CXXFLAGS) $(DSO_CPPFLAGS)', |
| bin => '$(BIN_CXXFLAGS) $(BIN_CPPFLAGS)' |
| } -> {$args{intent}}; |
| } else { |
| $cmd = '$(CC)'; |
| $cmdcompile = ' -c'; |
| $cmdflags = { |
| lib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)', |
| dso => '$(DSO_CFLAGS) $(DSO_CPPFLAGS)', |
| bin => '$(BIN_CFLAGS) $(BIN_CPPFLAGS)' |
| } -> {$args{intent}}; |
| } |
| my $recipe; |
| # extension-specific rules |
| if (grep /\.s$/, @srcs) { |
| $recipe .= <<"EOF"; |
| $obj$objext: $deps |
| $cmd $cmdflags -c -o \$\@ $srcs |
| EOF |
| } elsif (grep /\.S$/, @srcs) { |
| # Originally there was mutli-step rule with $(CC) -E file.S |
| # followed by $(CC) -c file.s. It compensated for one of |
| # legacy platform compiler's inability to handle .S files. |
| # The platform is long discontinued by vendor so there is |
| # hardly a point to drag it along... |
| $recipe .= <<"EOF"; |
| $obj$objext: $deps |
| $cmd $incs $cmdflags -c -o \$\@ $srcs |
| EOF |
| } elsif (defined $makedepprog && $makedepprog !~ /\/makedepend/ |
| && !grep /\.rc$/, @srcs) { |
| $recipe .= <<"EOF"; |
| $obj$objext: $deps |
| $cmd $incs $cmdflags -MMD -MF $obj$depext.tmp -MT \$\@ -c -o \$\@ $srcs |
| \@touch $obj$depext.tmp |
| \@if cmp $obj$depext.tmp $obj$depext > /dev/null 2> /dev/null; then \\ |
| rm -f $obj$depext.tmp; \\ |
| else \\ |
| mv $obj$depext.tmp $obj$depext; \\ |
| fi |
| EOF |
| } else { |
| $recipe .= <<"EOF"; |
| $obj$objext: $deps |
| $cmd $incs $cmdflags $cmdcompile -o \$\@ $srcs |
| EOF |
| if (defined $makedepprog && $makedepprog =~ /\/makedepend/) { |
| $recipe .= <<"EOF"; |
| \$(MAKEDEPEND) -f- -Y -- $incs $cmdflags -- $srcs 2>/dev/null \\ |
| > $obj$depext |
| EOF |
| } |
| } |
| return $recipe; |
| } |
| # On Unix, we build shlibs from static libs, so we're ignoring the |
| # object file array. We *know* this routine is only called when we've |
| # configure 'shared'. |
| sub libobj2shlib { |
| my %args = @_; |
| my $lib = $args{lib}; |
| my $shlib = $args{shlib}; |
| my $libd = dirname($lib); |
| my $libn = basename($lib); |
| (my $libname = $libn) =~ s/^lib//; |
| my @linkdirs = (); |
| foreach (@{args{deps}}) { |
| my $d = dirname($_); |
| push @linkdirs, $d unless grep { $d eq $_ } @linkdirs; |
| } |
| my $linkflags = join("", map { "-L$_ " } @linkdirs); |
| my $linklibs = join("", map { my $f = basename($_); |
| (my $l = $f) =~ s/^lib//; |
| " -l$l" } @{$args{deps}}); |
| my @objs = map { (my $x = $_) =~ s|\.o$||; "$x$objext" } |
| grep { $_ !~ m/\.(?:def|map)$/ } |
| @{$args{objs}}; |
| my @defs = grep { $_ =~ /\.(?:def|map)$/ } @{$args{objs}}; |
| my @deps = compute_lib_depends(@{$args{deps}}); |
| die "More than one exported symbol map" if scalar @defs > 1; |
| my $objs = join(" ", @objs); |
| my $deps = join(" ", @objs, @defs, @deps); |
| my $target = shlib_simple($lib); |
| my $target_full = shlib($lib); |
| my $shared_soname = ""; |
| $shared_soname .= ' '.$target{shared_sonameflag}.basename($target_full) |
| if defined $target{shared_sonameflag}; |
| my $shared_imp = ""; |
| $shared_imp .= ' '.$target{shared_impflag}.basename($target) |
| if defined $target{shared_impflag}; |
| my $shared_def = join("", map { ' '.$target{shared_defflag}.$_ } @defs); |
| my $recipe = <<"EOF"; |
| # When building on a Windows POSIX layer (Cygwin or Mingw), we know for a fact |
| # that two files get produced, {shlibname}.dll and {libname}.dll.a. |
| # With all other Unix platforms, we often build a shared library with the |
| # SO version built into the file name and a symlink without the SO version |
| # It's not necessary to have both as targets. The choice falls on the |
| # simplest, {libname}\$(SHLIB_EXT_IMPORT) for Windows POSIX layers and |
| # {libname}\$(SHLIB_EXT_SIMPLE) for the Unix platforms. |
| $target: $deps |
| \$(CC) \$(LIB_CFLAGS) $linkflags\$(LIB_LDFLAGS)$shared_soname$shared_imp \\ |
| -o $target_full$shared_def $objs \\ |
| $linklibs \$(LIB_EX_LIBS) |
| EOF |
| if (windowsdll()) { |
| $recipe .= <<"EOF"; |
| rm -f apps/$shlib'\$(SHLIB_EXT)' |
| rm -f test/$shlib'\$(SHLIB_EXT)' |
| rm -f fuzz/$shlib'\$(SHLIB_EXT)' |
| cp -p $shlib'\$(SHLIB_EXT)' apps/ |
| cp -p $shlib'\$(SHLIB_EXT)' test/ |
| cp -p $shlib'\$(SHLIB_EXT)' fuzz/ |
| EOF |
| } else { |
| $recipe .= <<"EOF"; |
| if [ '$target' != '$target_full' ]; then \\ |
| rm -f $target; \\ |
| ln -s $target_full $target; \\ |
| fi |
| EOF |
| } |
| } |
| sub obj2dso { |
| my %args = @_; |
| my $dso = $args{lib}; |
| my $dsod = dirname($dso); |
| my $dson = basename($dso); |
| my @linkdirs = (); |
| foreach (@{args{deps}}) { |
| my $d = dirname($_); |
| push @linkdirs, $d unless grep { $d eq $_ } @linkdirs; |
| } |
| my $linkflags = join("", map { "-L$_ " } @linkdirs); |
| my $linklibs = join("", map { my $f = basename($_); |
| (my $l = $f) =~ s/^lib//; |
| " -l$l" } @{$args{deps}}); |
| my @objs = map { (my $x = $_) =~ s|\.o$||; "$x$objext" } |
| grep { $_ !~ m/\.(?:def|map)$/ } |
| @{$args{objs}}; |
| my @deps = compute_lib_depends(@{$args{deps}}); |
| my $objs = join(" ", @objs); |
| my $deps = join(" ", @deps); |
| my $target = dso($dso); |
| return <<"EOF"; |
| $target: $objs $deps |
| \$(CC) \$(DSO_CFLAGS) $linkflags\$(DSO_LDFLAGS) \\ |
| -o $target $objs \\ |
| $linklibs \$(DSO_EX_LIBS) |
| EOF |
| } |
| sub obj2lib { |
| my %args = @_; |
| (my $lib = $args{lib}) =~ s/\.a$//; |
| my @objs = map { (my $x = $_) =~ s|\.o$|$objext|; $x } @{$args{objs}}; |
| my $objs = join(" ", @objs); |
| return <<"EOF"; |
| $lib$libext: $objs |
| \$(AR) \$(ARFLAGS) \$\@ \$\? |
| \$(RANLIB) \$\@ || echo Never mind. |
| EOF |
| } |
| sub obj2bin { |
| my %args = @_; |
| my $bin = $args{bin}; |
| my $bind = dirname($bin); |
| my $binn = basename($bin); |
| my $objs = join(" ", map { (my $x = $_) =~ s|\.o$||; "$x$objext" } |
| @{$args{objs}}); |
| my $deps = join(" ",compute_lib_depends(@{$args{deps}})); |
| my @linkdirs = (); |
| foreach (@{args{deps}}) { |
| next if $_ =~ /\.a$/; |
| my $d = dirname($_); |
| push @linkdirs, $d unless grep { $d eq $_ } @linkdirs; |
| } |
| my $linkflags = join("", map { "-L$_ " } @linkdirs); |
| my $linklibs = join("", map { if ($_ =~ /\.a$/) { |
| " $_"; |
| } else { |
| my $f = basename($_); |
| (my $l = $f) =~ s/^lib//; |
| " -l$l" |
| } |
| } @{$args{deps}}); |
| my $cmd = '$(CC)'; |
| my $cmdflags = '$(BIN_CFLAGS)'; |
| if (grep /_cc\.o$/, @{$args{objs}}) { |
| $cmd = '$(CXX)'; |
| $cmdflags = '$(BIN_CXXFLAGS)'; |
| } |
| return <<"EOF"; |
| $bin$exeext: $objs $deps |
| rm -f $bin$exeext |
| \$\${LDCMD:-$cmd} $cmdflags $linkflags\$(BIN_LDFLAGS) \\ |
| -o $bin$exeext $objs \\ |
| $linklibs \$(BIN_EX_LIBS) |
| EOF |
| } |
| sub in2script { |
| my %args = @_; |
| my $script = $args{script}; |
| my $sources = join(" ", @{$args{sources}}); |
| my $dofile = abs2rel(rel2abs(catfile($config{sourcedir}, |
| "util", "dofile.pl")), |
| rel2abs($config{builddir})); |
| return <<"EOF"; |
| $script: $sources |
| \$(PERL) "-I\$(BLDDIR)" -Mconfigdata "$dofile" \\ |
| "-o$target{build_file}" $sources > "$script" |
| chmod a+x $script |
| EOF |
| } |
| sub generatedir { |
| my %args = @_; |
| my $dir = $args{dir}; |
| my @deps = map { s|\.o$|$objext|; $_ } @{$args{deps}}; |
| my @actions = (); |
| my %extinfo = ( dso => $dsoext, |
| lib => $libext, |
| bin => $exeext ); |
| |
| foreach my $type (("dso", "lib", "bin", "script")) { |
| next unless defined($unified_info{dirinfo}->{$dir}->{products}->{$type}); |
| # For lib object files, we could update the library. However, it |
| # was decided that it's enough to build the directory local object |
| # files, so we don't need to add any actions, and the dependencies |
| # are already taken care of. |
| if ($type ne "lib") { |
| foreach my $prod (@{$unified_info{dirinfo}->{$dir}->{products}->{$type}}) { |
| if (dirname($prod) eq $dir) { |
| push @deps, $prod.$extinfo{$type}; |
| } else { |
| push @actions, "\t@ : No support to produce $type ".join(", ", @{$unified_info{dirinfo}->{$dir}->{products}->{$type}}); |
| } |
| } |
| } |
| } |
| |
| my $deps = join(" ", @deps); |
| my $actions = join("\n", "", @actions); |
| return <<"EOF"; |
| $args{dir} $args{dir}/: $deps$actions |
| EOF |
| } |
| "" # Important! This becomes part of the template result. |
| -} |
