| ## |
| ## Makefile for OpenSSL |
| ## |
| ## {- join("\n## ", @autowarntext) -} |
| {- |
| use OpenSSL::Util; |
| |
| our $makedep_scheme = $config{makedep_scheme}; |
| our $makedepcmd = platform->makedepcmd(); |
| |
| sub windowsdll { $config{target} =~ /^(?:Cygwin|mingw)/ } |
| |
| # Shared AIX support is special. We put libcrypto[64].so.ver into |
| # libcrypto.a and use libcrypto_a.a as static one. |
| sub sharedaix { !$disabled{shared} && $config{target} =~ /^aix/ } |
| |
| our $sover_dirname = platform->shlib_version_as_filename(); |
| |
| # This makes sure things get built in the order they need |
| # to. You're welcome. |
| sub dependmagic { |
| my $target = shift; |
| |
| return "$target: build_generated\n\t\$(MAKE) depend && \$(MAKE) _$target\n_$target"; |
| } |
| |
| our $COLUMNS = $ENV{COLUMNS}; |
| if ($COLUMNS =~ /^\d+$/) { |
| $COLUMNS = int($COLUMNS) - 2; # 2 to leave space for ending ' \' |
| } else { |
| $COLUMNS = 76; |
| } |
| |
| sub fill_lines { |
| my $item_sep = shift; # string |
| my $line_length = shift; # number of chars |
| |
| my @result = (); |
| my $resultpos = 0; |
| |
| foreach (@_) { |
| my $fill_line = $result[$resultpos] // ''; |
| my $newline = |
| ($fill_line eq '' ? '' : $fill_line . $item_sep) . $_; |
| |
| if (length($newline) > $line_length) { |
| # If this is a single item and the intended result line |
| # is empty, we put it there anyway |
| if ($fill_line eq '') { |
| $result[$resultpos++] = $newline; |
| } else { |
| $result[++$resultpos] = $_; |
| } |
| } else { |
| $result[$resultpos] = $newline; |
| } |
| } |
| return @result; |
| } |
| ''; |
| -} |
| PLATFORM={- $config{target} -} |
| OPTIONS={- $config{options} -} |
| CONFIGURE_ARGS=({- join(", ",quotify_l(@{$config{perlargv}})) -}) |
| SRCDIR={- $config{sourcedir} -} |
| BLDDIR={- $config{builddir} -} |
| FIPSKEY={- $config{FIPSKEY} -} |
| |
| VERSION={- "$config{full_version}" -} |
| VERSION_NUMBER={- "$config{version}" -} |
| MAJOR={- $config{major} -} |
| MINOR={- $config{minor} -} |
| SHLIB_VERSION_NUMBER={- $config{shlib_version} -} |
| SHLIB_TARGET={- $target{shared_target} -} |
| |
| LIBS={- join(" \\\n" . ' ' x 5, |
| fill_lines(" ", $COLUMNS - 5, |
| map { platform->staticlib($_) // () } |
| @{$unified_info{libraries}})) -} |
| SHLIBS={- join(" \\\n" . ' ' x 7, |
| fill_lines(" ", $COLUMNS - 7, |
| map { platform->sharedlib($_) // () } |
| @{$unified_info{libraries}})) -} |
| SHLIB_INFO={- join(" \\\n" . ' ' x 11, |
| fill_lines(" ", $COLUMNS - 11, |
| map { my $x = platform->sharedlib($_); |
| my $y = platform->sharedlib_simple($_) // ''; |
| my $z = platform->sharedlib_import($_) // ''; |
| $x ? "\"$x;$y;$z\"" : () } |
| @{$unified_info{libraries}})) -} |
| MODULES={- join(" \\\n" . ' ' x 8, |
| fill_lines(" ", $COLUMNS - 8, |
| map { platform->dso($_) } |
| # Drop all modules that are dependencies, they will |
| # be processed through their dependents |
| grep { my $x = $_; |
| !grep { grep { $_ eq $x } @$_ } |
| values %{$unified_info{depends}} } |
| @{$unified_info{modules}})) -} |
| FIPSMODULE={- # We do some extra checking here, as there should be only one |
| use File::Basename; |
| our @fipsmodules = |
| grep { !$unified_info{attributes}->{modules}->{$_}->{noinst} |
| && $unified_info{attributes}->{modules}->{$_}->{fips} } |
| @{$unified_info{modules}}; |
| die "More that one FIPS module" if scalar @fipsmodules > 1; |
| join(" ", map { platform->dso($_) } @fipsmodules) -} |
| FIPSMODULENAME={- die "More that one FIPS module" if scalar @fipsmodules > 1; |
| join(" ", map { basename(platform->dso($_)) } @fipsmodules) -} |
| |
| PROGRAMS={- join(" \\\n" . ' ' x 9, |
| fill_lines(" ", $COLUMNS - 9, |
| map { platform->bin($_) } |
| @{$unified_info{programs}})) -} |
| SCRIPTS={- join(" \\\n" . ' ' x 8, |
| fill_lines(" ", $COLUMNS - 8, @{$unified_info{scripts}})) -} |
| {- output_off() if $disabled{makedepend}; "" -} |
| DEPS={- join(" \\\n" . ' ' x 5, |
| fill_lines(" ", $COLUMNS - 5, |
| map { platform->isobj($_) ? platform->dep($_) : () } |
| grep { $unified_info{sources}->{$_}->[0] =~ /\.c$/ } |
| keys %{$unified_info{sources}})); -} |
| {- output_on() if $disabled{makedepend}; "" -} |
| GENERATED_MANDATORY={- join(" \\\n" . ' ' x 20, |
| fill_lines(" ", $COLUMNS - 20, |
| @{$unified_info{depends}->{""}})) -} |
| GENERATED_PODS={- # common0.tmpl provides @generated |
| join(" \\\n" . ' ' x 15, |
| fill_lines(" ", $COLUMNS - 15, |
| map { my $x = $_; |
| ( |
| grep { |
| $unified_info{attributes}->{depends} |
| ->{$x}->{$_}->{pod} // 0 |
| } |
| keys %{$unified_info{attributes}->{depends}->{$x}} |
| ) ? $x : (); |
| } |
| @generated)) -} |
| GENERATED={- # common0.tmpl provides @generated |
| join(" \\\n" . ' ' x 5, |
| fill_lines(" ", $COLUMNS - 5, |
| map { platform->convertext($_) } @generated )) -} |
| |
| INSTALL_LIBS={- |
| join(" \\\n" . ' ' x 13, |
| fill_lines(" ", $COLUMNS - 13, |
| map { platform->staticlib($_) // () } |
| grep { !$unified_info{attributes}->{libraries}->{$_}->{noinst} } |
| @{$unified_info{libraries}})) |
| -} |
| INSTALL_SHLIBS={- |
| join(" \\\n" . ' ' x 15, |
| fill_lines(" ", $COLUMNS - 15, |
| map { platform->sharedlib($_) // () } |
| grep { !$unified_info{attributes}->{libraries}->{$_}->{noinst} } |
| @{$unified_info{libraries}})) |
| -} |
| INSTALL_SHLIB_INFO={- |
| join(" \\\n" . ' ' x 19, |
| fill_lines(" ", $COLUMNS - 19, |
| map { my $x = platform->sharedlib($_); |
| my $y = platform->sharedlib_simple($_) // ''; |
| my $z = platform->sharedlib_import($_) // ''; |
| $x ? "\"$x;$y;$z\"" : () } |
| grep { !$unified_info{attributes}->{libraries}->{$_}->{noinst} } |
| @{$unified_info{libraries}})) |
| -} |
| INSTALL_ENGINES={- |
| join(" \\\n" . ' ' x 16, |
| fill_lines(" ", $COLUMNS - 16, |
| map { platform->dso($_) } |
| grep { !$unified_info{attributes}->{modules}->{$_}->{noinst} |
| && $unified_info{attributes}->{modules}->{$_}->{engine} } |
| @{$unified_info{modules}})) |
| -} |
| INSTALL_MODULES={- |
| join(" \\\n" . ' ' x 16, |
| fill_lines(" ", $COLUMNS - 16, |
| map { platform->dso($_) } |
| grep { !$unified_info{attributes}->{modules}->{$_}->{noinst} |
| && !$unified_info{attributes}->{modules}->{$_}->{engine} |
| && !$unified_info{attributes}->{modules}->{$_}->{fips} } |
| @{$unified_info{modules}})) |
| -} |
| INSTALL_FIPSMODULE={- |
| join(" \\\n" . ' ' x 16, |
| fill_lines(" ", $COLUMNS - 16, |
| map { platform->dso($_) } |
| grep { !$unified_info{attributes}->{modules}->{$_}->{noinst} |
| && $unified_info{attributes}->{modules}->{$_}->{fips} } |
| @{$unified_info{modules}})) |
| -} |
| INSTALL_FIPSMODULECONF=providers/fipsmodule.cnf |
| INSTALL_PROGRAMS={- |
| join(" \\\n" . ' ' x 16, |
| fill_lines(" ", $COLUMNS - 16, map { platform->bin($_) } |
| grep { !$unified_info{attributes}->{programs}->{$_}->{noinst} } |
| @{$unified_info{programs}})) |
| -} |
| BIN_SCRIPTS={- |
| join(" \\\n" . ' ' x 12, |
| fill_lines(" ", $COLUMNS - 12, |
| map { my $x = $unified_info{attributes}->{scripts}->{$_}->{linkname}; |
| $x ? "$_:$x" : $_ } |
| grep { !$unified_info{attributes}->{scripts}->{$_}->{noinst} |
| && !$unified_info{attributes}->{scripts}->{$_}->{misc} } |
| @{$unified_info{scripts}})) |
| -} |
| MISC_SCRIPTS={- |
| join(" \\\n" . ' ' x 13, |
| fill_lines(" ", $COLUMNS - 13, |
| map { my $x = $unified_info{attributes}->{scripts}->{$_}->{linkname}; |
| $x ? "$_:$x" : $_ } |
| grep { !$unified_info{attributes}->{scripts}->{$_}->{noinst} |
| && $unified_info{attributes}->{scripts}->{$_}->{misc} } |
| @{$unified_info{scripts}})) |
| -} |
| IMAGEDOCS1={- |
| join(" \\\n" . ' ' x 10, |
| fill_lines(" ", $COLUMNS - 10, |
| @{$unified_info{imagedocs}->{man1}})) -} |
| IMAGEDOCS3={- |
| join(" \\\n" . ' ' x 10, |
| fill_lines(" ", $COLUMNS - 10, |
| @{$unified_info{imagedocs}->{man3}})) -} |
| IMAGEDOCS5={- |
| join(" \\\n" . ' ' x 10, |
| fill_lines(" ", $COLUMNS - 10, |
| @{$unified_info{imagedocs}->{man5}})) -} |
| IMAGEDOCS7={- |
| join(" \\\n" . ' ' x 10, |
| fill_lines(" ", $COLUMNS - 10, |
| @{$unified_info{imagedocs}->{man7}})) -} |
| HTMLDOCS1={- |
| join(" \\\n" . ' ' x 10, |
| fill_lines(" ", $COLUMNS - 10, |
| @{$unified_info{htmldocs}->{man1}})) -} |
| HTMLDOCS3={- |
| join(" \\\n" . ' ' x 10, |
| fill_lines(" ", $COLUMNS - 10, |
| @{$unified_info{htmldocs}->{man3}})) -} |
| HTMLDOCS5={- |
| join(" \\\n" . ' ' x 10, |
| fill_lines(" ", $COLUMNS - 10, |
| @{$unified_info{htmldocs}->{man5}})) -} |
| HTMLDOCS7={- |
| join(" \\\n" . ' ' x 10, |
| fill_lines(" ", $COLUMNS - 10, |
| @{$unified_info{htmldocs}->{man7}})) -} |
| MANDOCS1={- |
| join(" \\\n" . ' ' x 9, |
| fill_lines(" ", $COLUMNS - 9, |
| @{$unified_info{mandocs}->{man1}})) -} |
| MANDOCS3={- |
| join(" \\\n" . ' ' x 9, |
| fill_lines(" ", $COLUMNS - 9, |
| @{$unified_info{mandocs}->{man3}})) -} |
| MANDOCS5={- |
| join(" \\\n" . ' ' x 9, |
| fill_lines(" ", $COLUMNS - 9, |
| @{$unified_info{mandocs}->{man5}})) -} |
| MANDOCS7={- |
| join(" \\\n" . ' ' x 9, |
| fill_lines(" ", $COLUMNS - 9, |
| @{$unified_info{mandocs}->{man7}})) -} |
| |
| APPS_OPENSSL="{- use File::Spec::Functions; |
| catfile("apps","openssl") -}" |
| |
| # DESTDIR is for package builders so that they can configure for, say, |
| # /usr/ and yet have everything installed to /tmp/somedir/usr/. |
| # Normally it is left empty. |
| DESTDIR= |
| |
| # Do not edit these manually. Use Configure with --prefix or --openssldir |
| # to change this! Short explanation in the top comment in Configure |
| INSTALLTOP={- # $prefix is used in the OPENSSLDIR perl snippet |
| # |
| our $prefix = $config{prefix} || "/usr/local"; |
| $prefix -} |
| OPENSSLDIR={- # |
| # The logic here is that if no --openssldir was given, |
| # OPENSSLDIR will get the value from $prefix plus "/ssl". |
| # If --openssldir was given and the value is an absolute |
| # path, OPENSSLDIR will get its value without change. |
| # If the value from --openssldir is a relative path, |
| # OPENSSLDIR will get $prefix with the --openssldir |
| # value appended as a subdirectory. |
| # |
| use File::Spec::Functions; |
| our $openssldir = |
| $config{openssldir} ? |
| (file_name_is_absolute($config{openssldir}) ? |
| $config{openssldir} |
| : catdir($prefix, $config{openssldir})) |
| : catdir($prefix, "ssl"); |
| $openssldir -} |
| LIBDIR={- our $libdir = $config{libdir}; |
| unless ($libdir) { |
| $libdir = "lib$target{multilib}"; |
| } |
| file_name_is_absolute($libdir) ? "" : $libdir -} |
| # $(libdir) is chosen to be compatible with the GNU coding standards |
| libdir={- file_name_is_absolute($libdir) |
| ? $libdir : '$(INSTALLTOP)/$(LIBDIR)' -} |
| ENGINESDIR=$(libdir)/engines-{- $sover_dirname -} |
| MODULESDIR=$(libdir)/ossl-modules |
| |
| # Convenience variable for those who want to set the rpath in shared |
| # libraries and applications |
| LIBRPATH=$(libdir) |
| |
| MANDIR=$(INSTALLTOP)/share/man |
| DOCDIR=$(INSTALLTOP)/share/doc/$(BASENAME) |
| HTMLDIR=$(DOCDIR)/html |
| |
| # MANSUFFIX is for the benefit of anyone who may want to have a suffix |
| # appended after the manpage file section number. "ssl" is popular, |
| # resulting in files such as config.5ssl rather than config.5. |
| MANSUFFIX=ossl |
| HTMLSUFFIX=html |
| |
| # For "optional" echo messages, to get "real" silence |
| ECHO = echo |
| |
| ##### User defined commands and flags ################################ |
| |
| # We let the C compiler driver to take care of .s files. This is done in |
| # order to be excused from maintaining a separate set of architecture |
| # dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC |
| # gcc, then the driver will automatically translate it to -xarch=v8plus |
| # and pass it down to assembler. In any case, we do not define AS or |
| # ASFLAGS for this reason. |
| |
| CROSS_COMPILE={- $config{CROSS_COMPILE} -} |
| CC=$(CROSS_COMPILE){- $config{CC} -} |
| CXX={- $config{CXX} ? "\$(CROSS_COMPILE)$config{CXX}" : '' -} |
| CPPFLAGS={- our $cppflags1 = join(" ", |
| (map { "-D".$_} @{$config{CPPDEFINES}}), |
| (map { "-I".$_} @{$config{CPPINCLUDES}}), |
| @{$config{CPPFLAGS}}) -} |
| CFLAGS={- join(' ', @{$config{CFLAGS}}) -} |
| CXXFLAGS={- join(' ', @{$config{CXXFLAGS}}) -} |
| LDFLAGS= {- join(' ', @{$config{LDFLAGS}}) -} |
| EX_LIBS= {- join(' ', @{$config{LDLIBS}}) -} |
| |
| MAKEDEPEND={- $config{makedepcmd} -} |
| |
| PERL={- $config{PERL} -} |
| |
| AR=$(CROSS_COMPILE){- $config{AR} -} |
| ARFLAGS= {- join(' ', @{$config{ARFLAGS}}) -} |
| RANLIB={- $config{RANLIB} ? "\$(CROSS_COMPILE)$config{RANLIB}" : "true"; -} |
| RC= $(CROSS_COMPILE){- $config{RC} -} |
| RCFLAGS={- join(' ', @{$config{RCFLAGS}}) -} {- $target{shared_rcflag} -} |
| |
| RM= rm -f |
| RMDIR= rmdir |
| TAR= {- $target{TAR} || "tar" -} |
| TARFLAGS= {- $target{TARFLAGS} -} |
| |
| BASENAME= openssl |
| NAME= $(BASENAME)-$(VERSION) |
| # Relative to $(SRCDIR) |
| TARFILE= ../$(NAME).tar |
| |
| ##### Project flags ################################################## |
| |
| # Variables starting with CNF_ are common variables for all product types |
| |
| CNF_CPPFLAGS={- our $cppflags2 = |
| join(' ', $target{cppflags} || (), |
| (map { "-D".$_} @{$target{defines}}, |
| @{$config{defines}}), |
| (map { "-I".$_} @{$target{includes}}, |
| @{$config{includes}}), |
| @{$config{cppflags}}) -} |
| CNF_CFLAGS={- join(' ', $target{cflags} || (), |
| @{$config{cflags}}) -} |
| CNF_CXXFLAGS={- join(' ', $target{cxxflags} || (), |
| @{$config{cxxflags}}) -} |
| CNF_LDFLAGS={- join(' ', $target{lflags} || (), |
| @{$config{lflags}}) -} |
| CNF_EX_LIBS={- join(' ', $target{ex_libs} || (), |
| @{$config{ex_libs}}) -} |
| |
| # Variables starting with LIB_ are used to build library object files |
| # and shared libraries. |
| # Variables starting with DSO_ are used to build DSOs and their object files. |
| # Variables starting with BIN_ are used to build programs and their object |
| # files. |
| |
| LIB_CPPFLAGS={- our $lib_cppflags = |
| join(' ', $target{lib_cppflags} || (), |
| $target{shared_cppflag} || (), |
| (map { '-D'.$_ } |
| @{$target{lib_defines} || ()}, |
| @{$target{shared_defines} || ()}, |
| @{$config{lib_defines} || ()}, |
| @{$config{shared_defines} || ()}), |
| (map { '-I'.quotify1($_) } |
| @{$target{lib_includes}}, |
| @{$target{shared_includes}}, |
| @{$config{lib_includes}}, |
| @{$config{shared_includes}}), |
| @{$config{lib_cppflags}}, |
| @{$config{shared_cppflag}}); |
| join(' ', $lib_cppflags, |
| (map { '-D'.$_ } |
| 'OPENSSLDIR="\"$(OPENSSLDIR)\""', |
| 'ENGINESDIR="\"$(ENGINESDIR)\""', |
| 'MODULESDIR="\"$(MODULESDIR)\""'), |
| '$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -} |
| LIB_CFLAGS={- join(' ', $target{lib_cflags} || (), |
| $target{shared_cflag} || (), |
| @{$config{lib_cflags}}, |
| @{$config{shared_cflag}}, |
| '$(CNF_CFLAGS)', '$(CFLAGS)') -} |
| LIB_CXXFLAGS={- join(' ', $target{lib_cxxflags} || (), |
| $target{shared_cxxflag} || (), |
| @{$config{lib_cxxflags}}, |
| @{$config{shared_cxxflag}}, |
| '$(CNF_CXXFLAGS)', '$(CXXFLAGS)') -} |
| LIB_LDFLAGS={- join(' ', $target{shared_ldflag} || (), |
| $config{shared_ldflag} || (), |
| '$(CNF_LDFLAGS)', '$(LDFLAGS)') -} |
| LIB_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS) |
| DSO_CPPFLAGS={- join(' ', $target{dso_cppflags} || (), |
| $target{module_cppflags} || (), |
| (map { '-D'.$_ } |
| @{$target{dso_defines}}, |
| @{$target{module_defines}}, |
| @{$config{dso_defines} || ()}, |
| @{$config{module_defines} || ()}), |
| (map { '-I'.quotify1($_) } |
| @{$target{dso_includes}}, |
| @{$target{module_includes}}, |
| @{$config{dso_includes}}, |
| @{$config{module_includes}}), |
| @{$config{dso_cppflags}}, |
| @{$config{module_cppflags}}, |
| '$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -} |
| DSO_CFLAGS={- join(' ', $target{dso_cflags} || (), |
| $target{module_cflags} || (), |
| @{$config{dso_cflags}}, |
| @{$config{module_cflags}}, |
| '$(CNF_CFLAGS)', '$(CFLAGS)') -} |
| DSO_CXXFLAGS={- join(' ', $target{dso_cxxflags} || (), |
| $target{module_cxxflags} || (), |
| @{$config{dso_cxxflags}}, |
| @{$config{module_cxxflag}}, |
| '$(CNF_CXXFLAGS)', '$(CXXFLAGS)') -} |
| DSO_LDFLAGS={- join(' ', $target{dso_ldflags} || (), |
| $target{module_ldflags} || (), |
| @{$config{dso_ldflags}}, |
| @{$config{module_ldflags}}, |
| '$(CNF_LDFLAGS)', '$(LDFLAGS)') -} |
| DSO_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS) |
| BIN_CPPFLAGS={- join(' ', $target{bin_cppflags} || (), |
| (map { '-D'.$_ } @{$config{bin_defines} || ()}), |
| @{$config{bin_cppflags}}, |
| '$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -} |
| BIN_CFLAGS={- join(' ', $target{bin_cflags} || (), |
| @{$config{bin_cflags}}, |
| '$(CNF_CFLAGS)', '$(CFLAGS)') -} |
| BIN_CXXFLAGS={- join(' ', $target{bin_cxxflags} || (), |
| @{$config{bin_cxxflags}}, |
| '$(CNF_CXXFLAGS)', '$(CXXFLAGS)') -} |
| BIN_LDFLAGS={- join(' ', $target{bin_lflags} || (), |
| @{$config{bin_lflags}}, |
| '$(CNF_LDFLAGS)', '$(LDFLAGS)') -} |
| BIN_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS) |
| |
| # CPPFLAGS_Q is used for one thing only: to build up buildinf.h |
| CPPFLAGS_Q={- $cppflags1 =~ s|([\\"])|\\$1|g; |
| $cppflags2 =~ s|([\\"])|\\$1|g; |
| $lib_cppflags =~ s|([\\"])|\\$1|g; |
| join(' ', $lib_cppflags || (), $cppflags2 || (), |
| $cppflags1 || ()) -} |
| |
| PERLASM_SCHEME= {- $target{perlasm_scheme} -} |
| |
| # For x86 assembler: Set PROCESSOR to 386 if you want to support |
| # the 80386. |
| PROCESSOR= {- $config{processor} -} |
| |
| # We want error [and other] messages in English. Trouble is that make(1) |
| # doesn't pass macros down as environment variables unless there already |
| # was corresponding variable originally set. In other words we can only |
| # reassign environment variables, but not set new ones, not in portable |
| # manner that is. That's why we reassign several, just to be sure... |
| LC_ALL=C |
| LC_MESSAGES=C |
| LANG=C |
| |
| # The main targets ################################################### |
| |
| {- dependmagic('build_sw'); -}: build_libs_nodep build_modules_nodep build_programs_nodep link-utils |
| {- dependmagic('build_libs'); -}: build_libs_nodep |
| {- dependmagic('build_modules'); -}: build_modules_nodep |
| {- dependmagic('build_programs'); -}: build_programs_nodep |
| |
| build_generated_pods: $(GENERATED_PODS) |
| build_docs: build_man_docs build_html_docs |
| build_man_docs: $(MANDOCS1) $(MANDOCS3) $(MANDOCS5) $(MANDOCS7) |
| build_html_docs: $(HTMLDOCS1) $(HTMLDOCS3) $(HTMLDOCS5) $(HTMLDOCS7) |
| |
| build_generated: $(GENERATED_MANDATORY) |
| build_libs_nodep: libcrypto.pc libssl.pc openssl.pc |
| build_modules_nodep: $(MODULES) |
| build_programs_nodep: $(PROGRAMS) $(SCRIPTS) |
| |
| # Kept around for backward compatibility |
| build_apps build_tests: build_programs |
| |
| # Convenience target to prebuild all generated files, not just the mandatory |
| # ones |
| build_all_generated: $(GENERATED_MANDATORY) $(GENERATED) build_docs |
| @ : {- output_off() if $disabled{makedepend}; "" -} |
| @echo "Warning: consider configuring with no-makedepend, because if" |
| @echo " target system doesn't have $(PERL)," |
| @echo " then make will fail..." |
| @ : {- output_on() if $disabled{makedepend}; "" -} |
| |
| all: build_sw build_docs |
| |
| test: tests |
| {- dependmagic('tests'); -}: build_programs_nodep build_modules_nodep link-utils run_tests |
| run_tests: |
| @ : {- output_off() if $disabled{tests}; "" -} |
| ( SRCTOP=$(SRCDIR) \ |
| BLDTOP=$(BLDDIR) \ |
| PERL="$(PERL)" \ |
| FIPSKEY="$(FIPSKEY)" \ |
| EXE_EXT={- platform->binext() -} \ |
| $(PERL) $(SRCDIR)/test/run_tests.pl $(TESTS) ) |
| @ : {- if ($disabled{tests}) { output_on(); } else { output_off(); } "" -} |
| @echo "Tests are not supported with your chosen Configure options" |
| @ : {- output_on() if !$disabled{tests}; "" -} |
| |
| list-tests: |
| @ : {- output_off() if $disabled{tests}; "" -} |
| $(MAKE) run_tests TESTS=list |
| @ : {- if ($disabled{tests}) { output_on(); } else { output_off(); } "" -} |
| @echo "Tests are not supported with your chosen Configure options" |
| @ : {- output_on() if !$disabled{tests}; "" -} |
| |
| install: install_sw install_ssldirs install_docs {- $disabled{fips} ? "" : "install_fips" -} |
| |
| uninstall: uninstall_docs uninstall_sw {- $disabled{fips} ? "" : "uninstall_fips" -} |
| |
| libclean: |
| @set -e; for s in $(SHLIB_INFO); do \ |
| if [ "$$s" = ";" ]; then continue; fi; \ |
| s1=`echo "$$s" | cut -f1 -d";"`; \ |
| s2=`echo "$$s" | cut -f2 -d";"`; \ |
| s3=`echo "$$s" | cut -f3 -d";"`; \ |
| $(ECHO) $(RM) $$s1; {- output_off() unless windowsdll(); "" -}\ |
| $(RM) apps/$$s1; \ |
| $(RM) test/$$s1; \ |
| $(RM) fuzz/$$s1; {- output_on() unless windowsdll(); "" -}\ |
| $(RM) $$s1; \ |
| if [ "$$s2" != "" ]; then \ |
| $(ECHO) $(RM) $$s2; \ |
| $(RM) $$s2; \ |
| fi; \ |
| if [ "$$s3" != "" ]; then \ |
| $(ECHO) $(RM) $$s3; \ |
| $(RM) $$s3; \ |
| fi; \ |
| done |
| $(RM) $(LIBS) |
| $(RM) *{- platform->defext() -} |
| |
| clean: libclean |
| $(RM) $(HTMLDOCS1) |
| $(RM) $(HTMLDOCS3) |
| $(RM) $(HTMLDOCS5) |
| $(RM) $(HTMLDOCS7) |
| $(RM) $(MANDOCS1) |
| $(RM) $(MANDOCS3) |
| $(RM) $(MANDOCS5) |
| $(RM) $(MANDOCS7) |
| $(RM) $(PROGRAMS) $(TESTPROGS) $(MODULES) $(FIPSMODULE) $(SCRIPTS) |
| $(RM) $(GENERATED_MANDATORY) $(GENERATED) |
| -find . -name '*{- platform->depext() -}' \! -name '.*' \! -type d -exec $(RM) {} \; |
| -find . -name '*{- platform->objext() -}' \! -name '.*' \! -type d -exec $(RM) {} \; |
| $(RM) core |
| $(RM) tags TAGS doc-nits md-nits |
| $(RM) -r test/test-runs |
| $(RM) providers/fips*.new |
| $(RM) openssl.pc libcrypto.pc libssl.pc |
| -find . -type l \! -name '.*' -exec $(RM) {} \; |
| |
| distclean: clean |
| $(RM) configdata.pm |
| $(RM) Makefile |
| |
| # We check if any depfile is newer than Makefile and decide to |
| # concatenate only if that is true. |
| depend: Makefile |
| @: {- output_off() if $disabled{makedepend}; "" -} |
| @$(PERL) $(SRCDIR)/util/add-depends.pl "{- $makedep_scheme -}" |
| @: {- output_on() if $disabled{makedepend}; "" -} |
| |
| # Install helper targets ############################################# |
| |
| install_sw: install_dev install_engines install_modules install_runtime |
| |
| uninstall_sw: uninstall_runtime uninstall_modules uninstall_engines uninstall_dev |
| |
| install_docs: install_man_docs install_html_docs |
| |
| uninstall_docs: uninstall_man_docs uninstall_html_docs |
| $(RM) -r $(DESTDIR)$(DOCDIR) |
| |
| {- output_off() if $disabled{fips}; "" -} |
| install_fips: build_sw $(INSTALL_FIPSMODULECONF) |
| @[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1) |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MODULESDIR) |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR) |
| @$(ECHO) "*** Installing FIPS module" |
| @$(ECHO) "install $(INSTALL_FIPSMODULE) -> $(DESTDIR)$(MODULESDIR)/$(FIPSMODULENAME)" |
| @cp "$(INSTALL_FIPSMODULE)" $(DESTDIR)$(MODULESDIR)/$(FIPSMODULENAME).new |
| @chmod 755 $(DESTDIR)$(MODULESDIR)/$(FIPSMODULENAME).new |
| @mv -f $(DESTDIR)$(MODULESDIR)/$(FIPSMODULENAME).new \ |
| $(DESTDIR)$(MODULESDIR)/$(FIPSMODULENAME) |
| @$(ECHO) "*** Installing FIPS module configuration" |
| @$(ECHO) "install $(INSTALL_FIPSMODULECONF) -> $(DESTDIR)$(OPENSSLDIR)/fipsmodule.cnf" |
| @cp $(INSTALL_FIPSMODULECONF) $(DESTDIR)$(OPENSSLDIR)/fipsmodule.cnf |
| |
| uninstall_fips: |
| @$(ECHO) "*** Uninstalling FIPS module configuration" |
| $(RM) $(DESTDIR)$(OPENSSLDIR)/fipsmodule.cnf |
| @$(ECHO) "*** Uninstalling FIPS module" |
| $(RM) $(DESTDIR)$(MODULESDIR)/$(FIPSMODULENAME) |
| {- if ($disabled{fips}) { output_on(); } else { output_off(); } "" -} |
| install_fips: |
| @$(ECHO) "The 'install_fips' target requires the 'enable-fips' option" |
| |
| uninstall_fips: |
| @$(ECHO) "The 'uninstall_fips' target requires the 'enable-fips' option" |
| {- output_on() if !$disabled{fips}; "" -} |
| |
| |
| install_ssldirs: |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/certs |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/private |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/misc |
| @set -e; for x in dummy $(MISC_SCRIPTS); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| x1=`echo "$$x" | cut -f1 -d:`; \ |
| x2=`echo "$$x" | cut -f2 -d:`; \ |
| fn=`basename $$x1`; \ |
| $(ECHO) "install $$x1 -> $(DESTDIR)$(OPENSSLDIR)/misc/$$fn"; \ |
| cp $$x1 $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new; \ |
| chmod 755 $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new; \ |
| mv -f $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new \ |
| $(DESTDIR)$(OPENSSLDIR)/misc/$$fn; \ |
| if [ "$$x1" != "$$x2" ]; then \ |
| ln=`basename "$$x2"`; \ |
| : {- output_off() unless windowsdll(); "" -}; \ |
| $(ECHO) "copy $(DESTDIR)$(OPENSSLDIR)/misc/$$ln -> $(DESTDIR)$(OPENSSLDIR)/misc/$$fn"; \ |
| cp $(DESTDIR)$(OPENSSLDIR)/misc/$$fn $(DESTDIR)$(OPENSSLDIR)/misc/$$ln; \ |
| : {- output_on() unless windowsdll(); |
| output_off() if windowsdll(); "" -}; \ |
| $(ECHO) "link $(DESTDIR)$(OPENSSLDIR)/misc/$$ln -> $(DESTDIR)$(OPENSSLDIR)/misc/$$fn"; \ |
| ln -sf $$fn $(DESTDIR)$(OPENSSLDIR)/misc/$$ln; \ |
| : {- output_on() if windowsdll(); "" -}; \ |
| fi; \ |
| done |
| @$(ECHO) "install $(SRCDIR)/apps/openssl.cnf -> $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.dist" |
| @cp $(SRCDIR)/apps/openssl.cnf $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new |
| @chmod 644 $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new |
| @mv -f $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.dist |
| @if [ ! -f "$(DESTDIR)$(OPENSSLDIR)/openssl.cnf" ]; then \ |
| $(ECHO) "install $(SRCDIR)/apps/openssl.cnf -> $(DESTDIR)$(OPENSSLDIR)/openssl.cnf"; \ |
| cp $(SRCDIR)/apps/openssl.cnf $(DESTDIR)$(OPENSSLDIR)/openssl.cnf; \ |
| chmod 644 $(DESTDIR)$(OPENSSLDIR)/openssl.cnf; \ |
| fi |
| @$(ECHO) "install $(SRCDIR)/apps/ct_log_list.cnf -> $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.dist" |
| @cp $(SRCDIR)/apps/ct_log_list.cnf $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.new |
| @chmod 644 $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.new |
| @mv -f $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.new $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.dist |
| @if [ ! -f "$(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf" ]; then \ |
| $(ECHO) "install $(SRCDIR)/apps/ct_log_list.cnf -> $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf"; \ |
| cp $(SRCDIR)/apps/ct_log_list.cnf $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf; \ |
| chmod 644 $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf; \ |
| fi |
| |
| install_dev: install_runtime_libs |
| @[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1) |
| @$(ECHO) "*** Installing development files" |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/include/openssl |
| @ : {- output_off() if $disabled{uplink}; "" -} |
| @$(ECHO) "install $(SRCDIR)/ms/applink.c -> $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c" |
| @cp $(SRCDIR)/ms/applink.c $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c |
| @chmod 644 $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c |
| @ : {- output_on() if $disabled{uplink}; "" -} |
| @set -e; for i in $(SRCDIR)/include/openssl/*.h \ |
| $(BLDDIR)/include/openssl/*.h; do \ |
| fn=`basename $$i`; \ |
| $(ECHO) "install $$i -> $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn"; \ |
| cp $$i $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \ |
| chmod 644 $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \ |
| done |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(libdir) |
| @set -e; for l in $(INSTALL_LIBS); do \ |
| fn=`basename $$l`; \ |
| $(ECHO) "install $$l -> $(DESTDIR)$(libdir)/$$fn"; \ |
| cp $$l $(DESTDIR)$(libdir)/$$fn.new; \ |
| $(RANLIB) $(DESTDIR)$(libdir)/$$fn.new; \ |
| chmod 644 $(DESTDIR)$(libdir)/$$fn.new; \ |
| mv -f $(DESTDIR)$(libdir)/$$fn.new \ |
| $(DESTDIR)$(libdir)/$$fn; \ |
| done |
| @ : {- output_off() if $disabled{shared}; "" -} |
| @set -e; for s in $(INSTALL_SHLIB_INFO); do \ |
| s1=`echo "$$s" | cut -f1 -d";"`; \ |
| s2=`echo "$$s" | cut -f2 -d";"`; \ |
| s3=`echo "$$s" | cut -f3 -d";"`; \ |
| fn1=`basename "$$s1"`; \ |
| fn2=`basename "$$s2"`; \ |
| fn3=`basename "$$s3"`; \ |
| : {- output_off(); output_on() unless windowsdll() or sharedaix(); "" -}; \ |
| if [ "$$fn2" != "" ]; then \ |
| $(ECHO) "link $(DESTDIR)$(libdir)/$$fn2 -> $(DESTDIR)$(libdir)/$$fn1"; \ |
| ln -sf $$fn1 $(DESTDIR)$(libdir)/$$fn2; \ |
| fi; \ |
| : {- output_off() unless windowsdll() or sharedaix(); output_on() if windowsdll(); "" -}; \ |
| if [ "$$fn3" != "" ]; then \ |
| $(ECHO) "install $$s3 -> $(DESTDIR)$(libdir)/$$fn3"; \ |
| cp $$s3 $(DESTDIR)$(libdir)/$$fn3.new; \ |
| chmod 755 $(DESTDIR)$(libdir)/$$fn3.new; \ |
| mv -f $(DESTDIR)$(libdir)/$$fn3.new \ |
| $(DESTDIR)$(libdir)/$$fn3; \ |
| fi; \ |
| : {- output_off() if windowsdll(); output_on() if sharedaix(); "" -}; \ |
| a=$(DESTDIR)$(libdir)/$$fn2; \ |
| $(ECHO) "install $$s1 -> $$a"; \ |
| if [ -f $$a ]; then ( trap "rm -rf /tmp/ar.$$$$" INT 0; \ |
| mkdir /tmp/ar.$$$$; ( cd /tmp/ar.$$$$; \ |
| cp -f $$a $$a.new; \ |
| for so in `$(AR) t $$a`; do \ |
| $(AR) x $$a $$so; \ |
| chmod u+w $$so; \ |
| strip -X32_64 -e $$so; \ |
| $(AR) r $$a.new $$so; \ |
| done; \ |
| )); fi; \ |
| $(AR) r $$a.new $$s1; \ |
| mv -f $$a.new $$a; \ |
| : {- output_off() if sharedaix(); output_on(); "" -}; \ |
| done |
| @ : {- output_on() if $disabled{shared}; "" -} |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(libdir)/pkgconfig |
| @$(ECHO) "install libcrypto.pc -> $(DESTDIR)$(libdir)/pkgconfig/libcrypto.pc" |
| @cp libcrypto.pc $(DESTDIR)$(libdir)/pkgconfig |
| @chmod 644 $(DESTDIR)$(libdir)/pkgconfig/libcrypto.pc |
| @$(ECHO) "install libssl.pc -> $(DESTDIR)$(libdir)/pkgconfig/libssl.pc" |
| @cp libssl.pc $(DESTDIR)$(libdir)/pkgconfig |
| @chmod 644 $(DESTDIR)$(libdir)/pkgconfig/libssl.pc |
| @$(ECHO) "install openssl.pc -> $(DESTDIR)$(libdir)/pkgconfig/openssl.pc" |
| @cp openssl.pc $(DESTDIR)$(libdir)/pkgconfig |
| @chmod 644 $(DESTDIR)$(libdir)/pkgconfig/openssl.pc |
| |
| uninstall_dev: uninstall_runtime_libs |
| @$(ECHO) "*** Uninstalling development files" |
| @ : {- output_off() if $disabled{uplink}; "" -} |
| @$(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c" |
| @$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c |
| @ : {- output_on() if $disabled{uplink}; "" -} |
| @set -e; for i in $(SRCDIR)/include/openssl/*.h \ |
| $(BLDDIR)/include/openssl/*.h; do \ |
| fn=`basename $$i`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn"; \ |
| $(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \ |
| done |
| -$(RMDIR) $(DESTDIR)$(INSTALLTOP)/include/openssl |
| -$(RMDIR) $(DESTDIR)$(INSTALLTOP)/include |
| @set -e; for l in $(INSTALL_LIBS); do \ |
| fn=`basename $$l`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn"; \ |
| $(RM) $(DESTDIR)$(libdir)/$$fn; \ |
| done |
| @ : {- output_off() if $disabled{shared}; "" -} |
| @set -e; for s in $(INSTALL_SHLIB_INFO); do \ |
| s1=`echo "$$s" | cut -f1 -d";"`; \ |
| s2=`echo "$$s" | cut -f2 -d";"`; \ |
| s3=`echo "$$s" | cut -f3 -d";"`; \ |
| fn1=`basename "$$s1"`; \ |
| fn2=`basename "$$s2"`; \ |
| fn3=`basename "$$s3"`; \ |
| : {- output_off() if windowsdll(); "" -}; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn1"; \ |
| $(RM) $(DESTDIR)$(libdir)/$$fn1; \ |
| if [ -n "$$fn2" ]; then \ |
| $(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn2"; \ |
| $(RM) $(DESTDIR)$(libdir)/$$fn2; \ |
| fi; \ |
| : {- output_on() if windowsdll(); "" -}{- output_off() unless windowsdll(); "" -}; \ |
| if [ -n "$$fn3" ]; then \ |
| $(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn3"; \ |
| $(RM) $(DESTDIR)$(libdir)/$$fn3; \ |
| fi; \ |
| : {- output_on() unless windowsdll(); "" -}; \ |
| done |
| @ : {- output_on() if $disabled{shared}; "" -} |
| $(RM) $(DESTDIR)$(libdir)/pkgconfig/libcrypto.pc |
| $(RM) $(DESTDIR)$(libdir)/pkgconfig/libssl.pc |
| $(RM) $(DESTDIR)$(libdir)/pkgconfig/openssl.pc |
| -$(RMDIR) $(DESTDIR)$(libdir)/pkgconfig |
| -$(RMDIR) $(DESTDIR)$(libdir) |
| |
| _install_modules_deps: install_runtime_libs build_modules |
| |
| install_engines: _install_modules_deps |
| @[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1) |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(ENGINESDIR)/ |
| @$(ECHO) "*** Installing engines" |
| @set -e; for e in dummy $(INSTALL_ENGINES); do \ |
| if [ "$$e" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$e`; \ |
| $(ECHO) "install $$e -> $(DESTDIR)$(ENGINESDIR)/$$fn"; \ |
| cp $$e $(DESTDIR)$(ENGINESDIR)/$$fn.new; \ |
| chmod 755 $(DESTDIR)$(ENGINESDIR)/$$fn.new; \ |
| mv -f $(DESTDIR)$(ENGINESDIR)/$$fn.new \ |
| $(DESTDIR)$(ENGINESDIR)/$$fn; \ |
| done |
| |
| uninstall_engines: |
| @$(ECHO) "*** Uninstalling engines" |
| @set -e; for e in dummy $(INSTALL_ENGINES); do \ |
| if [ "$$e" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$e`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(ENGINESDIR)/$$fn"; \ |
| $(RM) $(DESTDIR)$(ENGINESDIR)/$$fn; \ |
| done |
| -$(RMDIR) $(DESTDIR)$(ENGINESDIR) |
| |
| install_modules: _install_modules_deps |
| @[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1) |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MODULESDIR)/ |
| @$(ECHO) "*** Installing modules" |
| @set -e; for e in dummy $(INSTALL_MODULES); do \ |
| if [ "$$e" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$e`; \ |
| $(ECHO) "install $$e -> $(DESTDIR)$(MODULESDIR)/$$fn"; \ |
| cp $$e $(DESTDIR)$(MODULESDIR)/$$fn.new; \ |
| chmod 755 $(DESTDIR)$(MODULESDIR)/$$fn.new; \ |
| mv -f $(DESTDIR)$(MODULESDIR)/$$fn.new \ |
| $(DESTDIR)$(MODULESDIR)/$$fn; \ |
| done |
| |
| uninstall_modules: |
| @$(ECHO) "*** Uninstalling modules" |
| @set -e; for e in dummy $(INSTALL_MODULES); do \ |
| if [ "$$e" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$e`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(MODULESDIR)/$$fn"; \ |
| $(RM) $(DESTDIR)$(MODULESDIR)/$$fn; \ |
| done |
| -$(RMDIR) $(DESTDIR)$(MODULESDIR) |
| |
| install_runtime: install_programs |
| |
| install_runtime_libs: build_libs |
| @[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1) |
| @ : {- output_off() if windowsdll(); "" -} |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(libdir) |
| @ : {- output_on() if windowsdll(); output_off() unless windowsdll(); "" -} |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/bin |
| @ : {- output_on() unless windowsdll(); "" -} |
| @$(ECHO) "*** Installing runtime libraries" |
| @set -e; for s in dummy $(INSTALL_SHLIBS); do \ |
| if [ "$$s" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$s`; \ |
| : {- output_off() unless windowsdll(); "" -}; \ |
| $(ECHO) "install $$s -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \ |
| cp $$s $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \ |
| chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \ |
| mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \ |
| $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \ |
| : {- output_on() unless windowsdll(); "" -}{- output_off() if windowsdll(); "" -}; \ |
| $(ECHO) "install $$s -> $(DESTDIR)$(libdir)/$$fn"; \ |
| cp $$s $(DESTDIR)$(libdir)/$$fn.new; \ |
| chmod 755 $(DESTDIR)$(libdir)/$$fn.new; \ |
| mv -f $(DESTDIR)$(libdir)/$$fn.new \ |
| $(DESTDIR)$(libdir)/$$fn; \ |
| : {- output_on() if windowsdll(); "" -}; \ |
| done |
| |
| install_programs: install_runtime_libs build_programs |
| @[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1) |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/bin |
| @$(ECHO) "*** Installing runtime programs" |
| @set -e; for x in dummy $(INSTALL_PROGRAMS); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \ |
| cp $$x $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \ |
| chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \ |
| mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \ |
| $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \ |
| done |
| @set -e; for x in dummy $(BIN_SCRIPTS); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \ |
| cp $$x $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \ |
| chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \ |
| mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \ |
| $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \ |
| done |
| |
| uninstall_runtime: uninstall_programs uninstall_runtime_libs |
| |
| uninstall_programs: |
| @$(ECHO) "*** Uninstalling runtime programs" |
| @set -e; for x in dummy $(INSTALL_PROGRAMS); \ |
| do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \ |
| $(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \ |
| done; |
| @set -e; for x in dummy $(BIN_SCRIPTS); \ |
| do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \ |
| $(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \ |
| done |
| -$(RMDIR) $(DESTDIR)$(INSTALLTOP)/bin |
| |
| uninstall_runtime_libs: |
| @$(ECHO) "*** Uninstalling runtime libraries" |
| @ : {- output_off() unless windowsdll(); "" -} |
| @set -e; for s in dummy $(INSTALL_SHLIBS); do \ |
| if [ "$$s" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$s`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \ |
| $(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \ |
| done |
| @ : {- output_on() unless windowsdll(); "" -} |
| |
| |
| install_man_docs: build_man_docs |
| @[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1) |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MANDIR)/man1 |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MANDIR)/man3 |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MANDIR)/man5 |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MANDIR)/man7 |
| @$(ECHO) "*** Installing manpages" |
| @set -e; for x in dummy $(MANDOCS1); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX)"; \ |
| cp $$x $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX); \ |
| chmod 644 $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX); \ |
| $(PERL) $(SRCDIR)/util/write-man-symlinks install $(SRCDIR)/doc/man1 $(BLDDIR)/doc/man1 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man1; \ |
| done |
| @set -e; for x in dummy $(MANDOCS3); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX)"; \ |
| cp $$x $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX); \ |
| chmod 644 $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX); \ |
| $(PERL) $(SRCDIR)/util/write-man-symlinks install $(SRCDIR)/doc/man3 $(BLDDIR)/doc/man3 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man3; \ |
| done |
| @set -e; for x in dummy $(MANDOCS5); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX)"; \ |
| cp $$x $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX); \ |
| chmod 644 $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX); \ |
| $(PERL) $(SRCDIR)/util/write-man-symlinks install $(SRCDIR)/doc/man5 $(BLDDIR)/doc/man5 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man5; \ |
| done |
| @set -e; for x in dummy $(MANDOCS7); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX)"; \ |
| cp $$x $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX); \ |
| chmod 644 $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX); \ |
| $(PERL) $(SRCDIR)/util/write-man-symlinks install $(SRCDIR)/doc/man7 $(BLDDIR)/doc/man7 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man7; \ |
| done |
| |
| uninstall_man_docs: build_man_docs |
| @$(ECHO) "*** Uninstalling manpages" |
| @set -e; for x in dummy $(MANDOCS1); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX)"; \ |
| $(RM) $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX); \ |
| $(PERL) $(SRCDIR)/util/write-man-symlinks uninstall $(SRCDIR)/doc/man1 $(BLDDIR)/doc/man1 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man1; \ |
| done |
| @set -e; for x in dummy $(MANDOCS3); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX)"; \ |
| $(RM) $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX); \ |
| $(PERL) $(SRCDIR)/util/write-man-symlinks uninstall $(SRCDIR)/doc/man3 $(BLDDIR)/doc/man3 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man3; \ |
| done |
| @set -e; for x in dummy $(MANDOCS5); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX)"; \ |
| $(RM) $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX); \ |
| $(PERL) $(SRCDIR)/util/write-man-symlinks uninstall $(SRCDIR)/doc/man5 $(BLDDIR)/doc/man5 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man5; \ |
| done |
| @set -e; for x in dummy $(MANDOCS7); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX)"; \ |
| $(RM) $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX); \ |
| $(PERL) $(SRCDIR)/util/write-man-symlinks uninstall $(SRCDIR)/doc/man7 $(BLDDIR)/doc/man7 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man7; \ |
| done |
| |
| install_html_docs: install_image_docs build_html_docs |
| @[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1) |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man1 |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man3 |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man5 |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man7 |
| @$(ECHO) "*** Installing HTML manpages" |
| @set -e; for x in dummy $(HTMLDOCS1); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man1/$$fn"; \ |
| cp $$x $(DESTDIR)$(HTMLDIR)/man1/$$fn; \ |
| chmod 644 $(DESTDIR)$(HTMLDIR)/man1/$$fn; \ |
| done |
| @set -e; for x in dummy $(HTMLDOCS3); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man3/$$fn"; \ |
| cp $$x $(DESTDIR)$(HTMLDIR)/man3/$$fn; \ |
| chmod 644 $(DESTDIR)$(HTMLDIR)/man3/$$fn; \ |
| done |
| @set -e; for x in dummy $(HTMLDOCS5); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man5/$$fn"; \ |
| cp $$x $(DESTDIR)$(HTMLDIR)/man5/$$fn; \ |
| chmod 644 $(DESTDIR)$(HTMLDIR)/man5/$$fn; \ |
| done |
| @set -e; for x in dummy $(HTMLDOCS7); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man7/$$fn"; \ |
| cp $$x $(DESTDIR)$(HTMLDIR)/man7/$$fn; \ |
| chmod 644 $(DESTDIR)$(HTMLDIR)/man7/$$fn; \ |
| done |
| |
| uninstall_html_docs: uninstall_image_docs |
| @$(ECHO) "*** Uninstalling HTML manpages" |
| @set -e; for x in dummy $(HTMLDOCS1); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man1/$$fn"; \ |
| $(RM) $(DESTDIR)$(HTMLDIR)/man1/$$fn; \ |
| done |
| @set -e; for x in dummy $(HTMLDOCS3); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man3/$$fn"; \ |
| $(RM) $(DESTDIR)$(HTMLDIR)/man3/$$fn; \ |
| done |
| @set -e; for x in dummy $(HTMLDOCS5); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man5/$$fn"; \ |
| $(RM) $(DESTDIR)$(HTMLDIR)/man5/$$fn; \ |
| done |
| @set -e; for x in dummy $(HTMLDOCS7); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man7/$$fn"; \ |
| $(RM) $(DESTDIR)$(HTMLDIR)/man7/$$fn; \ |
| done |
| |
| install_image_docs: |
| @$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man7/img |
| @set -e; for x in dummy $(IMAGEDOCS7); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man7/img/$$fn"; \ |
| cp $(SRCDIR)/$$x $(DESTDIR)$(HTMLDIR)/man7/img/$$fn; \ |
| chmod 644 $(DESTDIR)$(HTMLDIR)/man7/img/$$fn; \ |
| done |
| |
| uninstall_image_docs: |
| @set -e; for x in dummy $(IMAGEDOCS7); do \ |
| if [ "$$x" = "dummy" ]; then continue; fi; \ |
| fn=`basename $$x`; \ |
| $(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man7/img/$$fn"; \ |
| $(RM) $(DESTDIR)$(HTMLDIR)/man7/img/$$fn; \ |
| done |
| |
| # Developer targets (note: these are only available on Unix) ######### |
| |
| # It's important that generate_buildinfo comes after ordinals, as ordinals |
| # is sensitive to build.info changes. |
| update: generate errors ordinals generate_buildinfo |
| |
| generate: generate_apps generate_crypto_bn generate_crypto_objects \ |
| generate_crypto_conf generate_crypto_asn1 generate_fuzz_oids |
| |
| generate_buildinfo: generate_doc_buildinfo |
| |
| .PHONY: doc-nits md-nits |
| doc-nits: build_generated_pods |
| $(PERL) $(SRCDIR)/util/find-doc-nits -c -n -l -e |
| |
| # This uses "mdl", the markdownlint application, which is written in ruby. |
| # The source is at https://github.com/markdownlint/markdownlint |
| # If you have ruby installed, "gem install mdl" should work. |
| # Another option is at https://snapcraft.io/install/mdl/debian |
| # Finally, there's a Node.js version, which we haven't tried, that |
| # can be found at https://github.com/DavidAnson/markdownlint |
| md-nits: |
| mdl -s util/markdownlint.rb . |
| |
| # Test coverage is a good idea for the future |
| #coverage: $(PROGRAMS) $(TESTPROGRAMS) |
| # ... |
| |
| lint: |
| lint -DLINT $(INCLUDES) $(SRCS) |
| |
| generate_apps: |
| ( cd $(SRCDIR); $(PERL) VMS/VMSify-conf.pl \ |
| < apps/openssl.cnf > apps/openssl-vms.cnf ) |
| |
| generate_crypto_bn: |
| ( cd $(SRCDIR); $(PERL) crypto/bn/bn_prime.pl > crypto/bn/bn_prime.h ) |
| |
| generate_crypto_objects: |
| ( cd $(SRCDIR); $(PERL) crypto/objects/objects.pl -n \ |
| crypto/objects/objects.txt \ |
| crypto/objects/obj_mac.num \ |
| > crypto/objects/obj_mac.new && \ |
| mv crypto/objects/obj_mac.new crypto/objects/obj_mac.num ) |
| ( cd $(SRCDIR); $(PERL) crypto/objects/objects.pl \ |
| crypto/objects/objects.txt \ |
| crypto/objects/obj_mac.num \ |
| > include/openssl/obj_mac.h ) |
| ( cd $(SRCDIR); $(PERL) crypto/objects/obj_dat.pl \ |
| include/openssl/obj_mac.h \ |
| > crypto/objects/obj_dat.h ) |
| ( cd $(SRCDIR); $(PERL) crypto/objects/objxref.pl \ |
| crypto/objects/obj_mac.num \ |
| crypto/objects/obj_xref.txt \ |
| > crypto/objects/obj_xref.h ) |
| ( cd $(SRCDIR); sed -e '1,8d' crypto/objects/obj_compat.h >> include/openssl/obj_mac.h ) |
| |
| generate_crypto_conf: |
| ( cd $(SRCDIR); $(PERL) crypto/conf/keysets.pl \ |
| > crypto/conf/conf_def.h ) |
| |
| generate_crypto_asn1: |
| ( cd $(SRCDIR); $(PERL) crypto/asn1/charmap.pl \ |
| > crypto/asn1/charmap.h ) |
| |
| generate_fuzz_oids: |
| ( cd $(SRCDIR); $(PERL) fuzz/mkfuzzoids.pl \ |
| crypto/objects/obj_dat.h \ |
| > fuzz/oids.txt ) |
| |
| generate_doc_buildinfo: |
| ( $(PERL) -I$(BLDDIR) -Mconfigdata \ |
| $(SRCDIR)/util/dofile.pl -o Makefile \ |
| $(SRCDIR)/doc/build.info.in \ |
| > $(SRCDIR)/doc/build.info.new; \ |
| if ( test -e $(SRCDIR)/doc/build.info \ |
| && cmp $(SRCDIR)/doc/build.info.new $(SRCDIR)/doc/build.info \ |
| > /dev/null ); \ |
| then \ |
| rm $(SRCDIR)/doc/build.info.new; \ |
| else \ |
| mv $(SRCDIR)/doc/build.info.new $(SRCDIR)/doc/build.info; \ |
| fi ) |
| |
| generate_fips_sources: providers/fips.module.sources.new |
| providers/fips.module.sources.new: configdata.pm |
| rm -rf sources-tmp |
| mkdir sources-tmp |
| ( \ |
| srcdir=`cd $(SRCDIR); pwd`; \ |
| cd sources-tmp \ |
| && $$srcdir/Configure --banner=Configured enable-fips -O0 \ |
| && ./configdata.pm --query 'get_sources("providers/fips")' > sources1 \ |
| && $(MAKE) -sj 4 build_generated providers/fips.so \ |
| && find . -name '*.d' | xargs cat > dep1 \ |
| && $(MAKE) distclean \ |
| && $$srcdir/Configure --banner=Configured enable-fips no-asm -O0 \ |
| && ./configdata.pm --query 'get_sources("providers/fips")' > sources2 \ |
| && $(MAKE) -sj 4 build_generated providers/fips.so \ |
| && find . -name '*.d' | xargs cat > dep2 \ |
| && cat sources1 sources2 \ |
| | grep -v ' : \\$$' | grep -v util/providers.num \ |
| | sed -e 's/^ *//' -e 's/ *\\$$//' \ |
| | sort | uniq > sources \ |
| && cat dep1 dep2 \ |
| | $(PERL) -p -e 's/\\\n//' \ |
| | sed -e 's/^.*: *//' -e 's/ */ /g' \ |
| | fgrep -f sources \ |
| | tr ' ' '\n' \ |
| | sort | uniq > deps.raw \ |
| && cat deps.raw \ |
| | xargs ./configdata.pm --query 'get_sources(@ARGV)' \ |
| | $(PERL) -p -e 's/\\\n//' \ |
| | sed -e 's/\./\\\./g' -e 's/ : */:/' -e 's/^/s:/' -e 's/$$/:/' \ |
| > deps.sed \ |
| && cat deps.raw | sed -f deps.sed > deps \ |
| ) |
| ( \ |
| cat sources-tmp/sources sources-tmp/deps \ |
| | $(PERL) -p -e 's:^ *\Q../\E:: ;' \ |
| -e 's:^\Q$(SRCDIR)/\E:: if "$(SRCDIR)" ne "." ;' \ |
| -e 'my $$x; do { $$x = $$_; s:(^|/)((?!\Q../\E)[^/]*/)\Q..\E($$|/):$$1: } while ($$x ne $$_) ;' ; \ |
| cd $(SRCDIR); \ |
| for x in crypto/bn/asm/*.pl crypto/bn/asm/*.S \ |
| crypto/aes/asm/*.pl crypto/aes/asm/*.S \ |
| crypto/ec/asm/*.pl \ |
| crypto/modes/asm/*.pl \ |
| crypto/sha/asm/*.pl \ |
| crypto/x86_64cpuid.pl; do \ |
| echo "$$x"; \ |
| done \ |
| ) | sort | uniq > providers/fips.module.sources.new |
| rm -rf sources-tmp |
| |
| # Set to -force to force a rebuild |
| ERROR_REBUILD= |
| errors: |
| ( b=`pwd`; set -e; cd $(SRCDIR); \ |
| $(PERL) util/ck_errf.pl -strict -internal; \ |
| $(PERL) -I$$b util/mkerr.pl $(ERROR_REBUILD) -internal ) |
| ( b=`pwd`; set -e; cd $(SRCDIR)/engines; \ |
| for E in *.ec ; do \ |
| $(PERL) ../util/ck_errf.pl -strict \ |
| -conf $$E `basename $$E .ec`.c; \ |
| $(PERL) -I$$b ../util/mkerr.pl $(ERROR_REBUILD) -static \ |
| -conf $$E `basename $$E .ec`.c ; \ |
| done ) |
| |
| {- use File::Basename; |
| |
| my @sslheaders_tmpl = |
| qw( include/openssl/ssl.h |
| include/openssl/ssl2.h |
| include/openssl/ssl3.h |
| include/openssl/sslerr.h |
| include/openssl/tls1.h |
| include/openssl/dtls1.h |
| include/openssl/srtp.h |
| include/openssl/sslerr_legacy.h ); |
| my @cryptoheaders_tmpl = |
| qw( include/internal/dso.h |
| include/internal/o_dir.h |
| include/internal/err.h |
| include/internal/evp.h |
| include/internal/pem.h |
| include/internal/asn1.h |
| include/internal/sslconf.h ); |
| my @cryptoskipheaders = ( @sslheaders_tmpl, |
| qw( include/openssl/conf_api.h |
| include/openssl/ebcdic.h |
| include/openssl/opensslconf.h |
| include/openssl/symhacks.h ) ); |
| our %cryptoheaders = (); |
| our %sslheaders = (); |
| foreach my $d ( qw( include/openssl include/internal ) ) { |
| my @header_patterns = |
| map { catfile($config{sourcedir}, $d, $_) } ( '*.h', '*.h.in' ); |
| foreach my $f ( map { glob($_) } @header_patterns ) { |
| my $base = basename($f); |
| my $base_in = basename($f, '.in'); |
| my $dir = catfile($config{sourcedir}, $d); |
| if ($base ne $base_in) { |
| # We have a .h.in file, which means the header file is in the |
| # build tree. |
| $base = $base_in; |
| $dir = catfile($config{builddir}, $d); |
| } |
| my $new_f = catfile($dir, $base); |
| my $fn = "$d/$base"; |
| # The logic to add files to @cryptoheaders is a bit complex. The |
| # file to be added must be either in the public header directory |
| # or one of the pre-declared internal headers, and must under no |
| # circumstances be one of those that must be skipped. |
| $cryptoheaders{$new_f} = 1 |
| if (($d eq 'include/openssl' |
| || ( grep { $_ eq $fn } @cryptoheaders_tmpl )) |
| && !( grep { $_ eq $fn } @cryptoskipheaders )); |
| # The logic to add files to @sslheaders is much simpler... |
| $sslheaders{$new_f} = 1 if grep { $_ eq $fn } @sslheaders_tmpl; |
| } |
| } |
| ""; |
| -} |
| CRYPTOHEADERS={- join(" \\\n" . ' ' x 14, |
| fill_lines(" ", $COLUMNS - 14, sort keys %cryptoheaders)) -} |
| SSLHEADERS={- join(" \\\n" . ' ' x 11, |
| fill_lines(" ", $COLUMNS - 11, sort keys %sslheaders)) -} |
| |
| renumber: build_generated |
| $(PERL) $(SRCDIR)/util/mknum.pl --version $(VERSION_NUMBER) --no-warnings \ |
| --ordinals $(SRCDIR)/util/libcrypto.num \ |
| --symhacks $(SRCDIR)/include/openssl/symhacks.h \ |
| --renumber \ |
| $(CRYPTOHEADERS) |
| $(PERL) $(SRCDIR)/util/mknum.pl --version $(VERSION_NUMBER) --no-warnings \ |
| --ordinals $(SRCDIR)/util/libssl.num \ |
| --symhacks $(SRCDIR)/include/openssl/symhacks.h \ |
| --renumber \ |
| $(SSLHEADERS) |
| |
| ordinals: build_generated |
| $(PERL) $(SRCDIR)/util/mknum.pl --version $(VERSION_NUMBER) --no-warnings \ |
| --ordinals $(SRCDIR)/util/libcrypto.num \ |
| --symhacks $(SRCDIR)/include/openssl/symhacks.h \ |
| $(CRYPTOHEADERS) |
| $(PERL) $(SRCDIR)/util/mknum.pl --version $(VERSION_NUMBER) --no-warnings \ |
| --ordinals $(SRCDIR)/util/libssl.num \ |
| --symhacks $(SRCDIR)/include/openssl/symhacks.h \ |
| $(SSLHEADERS) |
| |
| test_ordinals: |
| $(MAKE) run_tests TESTS=test_ordinals |
| |
| tags TAGS: FORCE |
| rm -f TAGS tags |
| -ctags -R . |
| -etags `find . -name '*.[ch]' -o -name '*.pm'` |
| |
| providers/fips.checksum.new: providers/fips.module.sources.new |
| @which unifdef > /dev/null || \ |
| ( echo >&2 "ERROR: unifdef not in your \$$PATH, FIPS checksums not calculated"; \ |
| false ) |
| ( sources=`pwd`/providers/fips.module.sources.new; \ |
| cd $(SRCDIR) \ |
| && cat $$sources \ |
| | xargs ./util/fips-checksums.sh ) \ |
| > providers/fips-sources.checksums.new \ |
| && sha256sum providers/fips-sources.checksums.new \ |
| | sed -e 's|\.new||' > providers/fips.checksum.new |
| |
| fips-checksums: providers/fips.checksum.new |
| |
| $(SRCDIR)/providers/fips.checksum: providers/fips.checksum.new |
| cp -p providers/fips.module.sources.new $(SRCDIR)/providers/fips.module.sources |
| cp -p providers/fips-sources.checksums.new $(SRCDIR)/providers/fips-sources.checksums |
| cp -p providers/fips.checksum.new $(SRCDIR)/providers/fips.checksum |
| |
| update-fips-checksums: $(SRCDIR)/providers/fips.checksum |
| |
| diff-fips-checksums: fips-checksums |
| diff -u $(SRCDIR)/providers/fips.module.sources providers/fips.module.sources.new |
| diff -u $(SRCDIR)/providers/fips-sources.checksums providers/fips-sources.checksums.new |
| diff -u $(SRCDIR)/providers/fips.checksum providers/fips.checksum.new |
| |
| # Release targets (note: only available on Unix) ##################### |
| |
| tar: |
| (cd $(SRCDIR); ./util/mktar.sh --name='$(NAME)' --tarfile='$(TARFILE)') |
| |
| # Helper targets ##################################################### |
| |
| link-utils: $(BLDDIR)/util/opensslwrap.sh $(BLDDIR)/apps/openssl.cnf |
| |
| $(BLDDIR)/util/opensslwrap.sh: Makefile |
| @if [ "$(SRCDIR)" != "$(BLDDIR)" ]; then \ |
| mkdir -p "$(BLDDIR)/util"; \ |
| ln -sf "../$(SRCDIR)/util/`basename "$@"`" "$(BLDDIR)/util"; \ |
| fi |
| |
| $(BLDDIR)/apps/openssl.cnf: Makefile |
| @if [ "$(SRCDIR)" != "$(BLDDIR)" ]; then \ |
| mkdir -p "$(BLDDIR)/apps"; \ |
| ln -sf "../$(SRCDIR)/apps/`basename "$@"`" "$(BLDDIR)/apps"; \ |
| fi |
| |
| FORCE: |
| |
| # Building targets ################################################### |
| |
| libcrypto.pc libssl.pc openssl.pc: Makefile $(LIBS) {- join(" ",map { platform->sharedlib_simple($_) // platform->sharedlib_import($_) // platform->sharedlib($_) // () } @{$unified_info{libraries}}) -} |
| |
| libcrypto.pc: |
| @ ( echo 'prefix=$(INSTALLTOP)'; \ |
| echo 'exec_prefix=$${prefix}'; \ |
| if [ -n "$(LIBDIR)" ]; then \ |
| echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \ |
| else \ |
| echo 'libdir=$(libdir)'; \ |
| fi; \ |
| echo 'includedir=$${prefix}/include'; \ |
| echo 'enginesdir=$${libdir}/engines-{- $sover_dirname -}'; \ |
| echo 'modulesdir=$${libdir}/ossl-modules'; \ |
| echo ''; \ |
| echo 'Name: OpenSSL-libcrypto'; \ |
| echo 'Description: OpenSSL cryptography library'; \ |
| echo 'Version: '$(VERSION); \ |
| echo 'Libs: -L$${libdir} -lcrypto'; \ |
| echo 'Libs.private: $(LIB_EX_LIBS)'; \ |
| echo 'Cflags: -I$${includedir}' ) > libcrypto.pc |
| |
| libssl.pc: |
| @ ( echo 'prefix=$(INSTALLTOP)'; \ |
| echo 'exec_prefix=$${prefix}'; \ |
| if [ -n "$(LIBDIR)" ]; then \ |
| echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \ |
| else \ |
| echo 'libdir=$(libdir)'; \ |
| fi; \ |
| echo 'includedir=$${prefix}/include'; \ |
| echo ''; \ |
| echo 'Name: OpenSSL-libssl'; \ |
| echo 'Description: Secure Sockets Layer and cryptography libraries'; \ |
| echo 'Version: '$(VERSION); \ |
| echo 'Requires.private: libcrypto'; \ |
| echo 'Libs: -L$${libdir} -lssl'; \ |
| echo 'Cflags: -I$${includedir}' ) > libssl.pc |
| |
| openssl.pc: |
| @ ( echo 'prefix=$(INSTALLTOP)'; \ |
| echo 'exec_prefix=$${prefix}'; \ |
| if [ -n "$(LIBDIR)" ]; then \ |
| echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \ |
| else \ |
| echo 'libdir=$(libdir)'; \ |
| fi; \ |
| echo 'includedir=$${prefix}/include'; \ |
| echo ''; \ |
| echo 'Name: OpenSSL'; \ |
| echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \ |
| echo 'Version: '$(VERSION); \ |
| echo 'Requires: libssl libcrypto' ) > openssl.pc |
| |
| Makefile: configdata.pm \ |
| {- join(" \\\n" . ' ' x 10, |
| fill_lines(" ", $COLUMNS - 10, |
| @{$config{build_file_templates}})) -} |
| @echo "Detected changed: $?" |
| $(PERL) configdata.pm |
| @echo "**************************************************" |
| @echo "*** ***" |
| @echo "*** Please run the same make command again ***" |
| @echo "*** ***" |
| @echo "**************************************************" |
| @false |
| |
| configdata.pm: $(SRCDIR)/Configure $(SRCDIR)/config \ |
| {- join(" \\\n" . ' ' x 15, |
| fill_lines(" ", $COLUMNS - 15, |
| @{$config{build_infos}}, |
| @{$config{conf_files}})) -} |
| @echo "Detected changed: $?" |
| $(PERL) configdata.pm -r |
| @echo "**************************************************" |
| @echo "*** ***" |
| @echo "*** Please run the same make command again ***" |
| @echo "*** ***" |
| @echo "**************************************************" |
| @false |
| |
| reconfigure reconf: |
| $(PERL) configdata.pm -r |
| |
| {- |
| use File::Basename; |
| use File::Spec::Functions qw/:DEFAULT abs2rel rel2abs/; |
| |
| # Helper function to convert dependencies in platform agnostic form to |
| # dependencies in platform form. |
| sub compute_platform_depends { |
| map { my $x = $_; |
| |
| grep { $x eq $_ } @{$unified_info{programs}} and platform->bin($x) |
| or grep { $x eq $_ } @{$unified_info{modules}} and platform->dso($x) |
| or grep { $x eq $_ } @{$unified_info{libraries}} and platform->lib($x) |
| or platform->convertext($x); } @_; |
| } |
| |
| # Helper function to figure out dependencies on libraries |
| # It takes a list of library names and outputs a list of dependencies |
| sub compute_lib_depends { |
| # Depending on shared libraries: |
| # On Windows POSIX layers, we depend on {libname}.dll.a |
| # On Unix platforms, we depend on {shlibname}.so |
| return map { platform->sharedlib_simple($_) |
| // platform->sharedlib_import($_) |
| // platform->sharedlib($_) |
| // platform->staticlib($_) |
| } @_; |
| } |
| |
| sub generatetarget { |
| my %args = @_; |
| my $deps = join(" ", compute_platform_depends(@{$args{deps}})); |
| return <<"EOF"; |
| $args{target}: $deps |
| EOF |
| } |
| |
| sub generatesrc { |
| my %args = @_; |
| my $gen0 = $args{generator}->[0]; |
| my $gen_args = join('', map { " $_" } |
| @{$args{generator}}[1..$#{$args{generator}}]); |
| my $gen_incs = join("", map { " -I".$_ } @{$args{generator_incs}}); |
| my $incs = join("", map { " -I".$_ } @{$args{incs}}); |
| my $defs = join("", map { " -D".$_ } @{$args{defs}}); |
| my $deps = join(" ", compute_platform_depends(@{$args{generator_deps}}, |
| @{$args{deps}})); |
| |
| if ($args{src} =~ /\.html$/) { |
| # |
| # HTML generator |
| # |
| my $title = basename($args{src}, ".html"); |
| my $pod = $gen0; |
| return <<"EOF"; |
| $args{src}: $pod |
| \$(PERL) \$(SRCDIR)/util/mkpod2html.pl -i "$pod" -o \$\@ -t "$title" -r "\$(SRCDIR)/doc" |
| EOF |
| } elsif ($args{src} =~ /\.(\d)$/) { |
| # |
| # Man-page generator |
| # |
| my $section = $1; |
| my $name = uc basename($args{src}, ".$section"); |
| my $pod = $gen0; |
| return <<"EOF"; |
| $args{src}: $pod |
| pod2man --name=$name --section=$section\$(MANSUFFIX) --center=OpenSSL \\ |
| --release=\$(VERSION) $pod >\$\@ |
| EOF |
| } elsif (platform->isdef($args{src})) { |
| # |
| # Linker script-ish generator |
| # |
| my $target = platform->def($args{src}); |
| (my $mkdef_os = $target{shared_target}) =~ s|-shared$||; |
| my $ord_ver = $args{intent} eq 'lib' ? ' --version $(VERSION_NUMBER)' : ''; |
| my $ord_name = $args{generator}->[1] || $args{product}; |
| return <<"EOF"; |
| $target: $gen0 $deps \$(SRCDIR)/util/mkdef.pl |
| \$(PERL) \$(SRCDIR)/util/mkdef.pl$ord_ver --ordinals $gen0 --name $ord_name --OS $mkdef_os > $target |
| EOF |
| } elsif (platform->isasm($args{src})) { |
| # |
| # Assembler generator |
| # |
| my $cppflags = { |
| shlib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)', |
| lib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)', |
| dso => '$(DSO_CFLAGS) $(DSO_CPPFLAGS)', |
| bin => '$(BIN_CFLAGS) $(BIN_CPPFLAGS)' |
| } -> {$args{intent}}; |
| |
| my $generator; |
| if ($gen0 =~ /\.pl$/) { |
| $generator = 'CC="$(CC)" $(PERL)'.$gen_incs.' '.$gen0.$gen_args |
| .' "$(PERLASM_SCHEME)"'.$incs.' '.$cppflags.$defs.' $(PROCESSOR)'; |
| } elsif ($gen0 =~ /\.m4$/) { |
| $generator = 'm4 -B 8192'.$gen_incs.' '.$gen0.$gen_args.' >' |
| } elsif ($gen0 =~ /\.S$/) { |
| $generator = undef; |
| } else { |
| die "Generator type for $args{src} unknown: $gen0\n"; |
| } |
| |
| if (defined($generator)) { |
| return <<"EOF"; |
| $args{src}: $gen0 $deps |
| $generator \$@ |
| EOF |
| } |
| return <<"EOF"; |
| $args{src}: $gen0 $deps |
| \$(CC) $incs $cppflags $defs -E $gen0 | \\ |
| \$(PERL) -ne '/^#(line)?\\s*[0-9]+/ or print' > \$@ |
| EOF |
| } elsif ($gen0 =~ m|^.*\.in$|) { |
| # |
| # "dofile" generator (file.in -> file) |
| # |
| my $dofile = abs2rel(rel2abs(catfile($config{sourcedir}, |
| "util", "dofile.pl")), |
| rel2abs($config{builddir})); |
| my @perlmodules = ( 'configdata.pm', |
| grep { $_ =~ m|\.pm$| } @{$args{deps}} ); |
| my %perlmoduleincs = map { '"-I'.dirname($_).'"' => 1 } @perlmodules; |
| $deps = join(' ', $deps, compute_platform_depends(@perlmodules)); |
| @perlmodules = map { "-M".basename($_, '.pm') } @perlmodules; |
| my $perlmodules = join(' ', '', sort keys %perlmoduleincs, @perlmodules); |
| return <<"EOF"; |
| $args{src}: $gen0 $deps |
| \$(PERL)$perlmodules "$dofile" "-o$target{build_file}" $gen0$gen_args > \$@ |
| EOF |
| } elsif (grep { $_ eq $gen0 } @{$unified_info{programs}}) { |
| # |
| # Generic generator using OpenSSL programs |
| # |
| |
| # Redo $gen0, to ensure that we have the proper extension where |
| # necessary. |
| $gen0 = platform->bin($gen0); |
| # Use $(PERL) to execute wrap.pl directly to avoid calling env |
| return <<"EOF"; |
| $args{src}: $gen0 $deps \$(BLDDIR)/util/wrap.pl |
| \$(PERL) \$(BLDDIR)/util/wrap.pl $gen0$gen_args > \$@ |
| EOF |
| } else { |
| # |
| # Generic generator using Perl |
| # |
| return <<"EOF"; |
| $args{src}: $gen0 $deps |
| \$(PERL)$gen_incs $gen0$gen_args > \$@ |
| EOF |
| } |
| } |
| |
| # Should one wonder about the end of the Perl snippet, it's because this |
| # second regexp eats up line endings as well, if the removed path is the |
| # last in the line. We may therefore need to put back a line ending. |
| sub src2obj { |
| my %args = @_; |
| my $obj = platform->convertext($args{obj}); |
| my $dep = platform->dep($args{obj}); |
| my @srcs = @{$args{srcs}}; |
| my $srcs = join(" ", @srcs); |
| my $deps = join(" ", @srcs, @{$args{deps}}); |
| my $incs = join("", map { " -I".$_ } @{$args{incs}}); |
| my $defs = join("", map { " -D".$_ } @{$args{defs}}); |
| my $cmd; |
| my $cmdflags; |
| my $cmdcompile; |
| if (grep /\.rc$/, @srcs) { |
| $cmd = '$(RC)'; |
| $cmdflags = '$(RCFLAGS)'; |
| $cmdcompile = ''; |
| } elsif (grep /\.(cc|cpp)$/, @srcs) { |
| $cmd = '$(CXX)'; |
| $cmdcompile = ' -c'; |
| $cmdflags = { |
| shlib => '$(LIB_CXXFLAGS) $(LIB_CPPFLAGS)', |
| lib => '$(LIB_CXXFLAGS) $(LIB_CPPFLAGS)', |
| dso => '$(DSO_CXXFLAGS) $(DSO_CPPFLAGS)', |
| bin => '$(BIN_CXXFLAGS) $(BIN_CPPFLAGS)' |
| } -> {$args{intent}}; |
| } else { |
| $cmd = '$(CC)'; |
| $cmdcompile = ' -c'; |
| $cmdflags = { |
| shlib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)', |
| lib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)', |
| dso => '$(DSO_CFLAGS) $(DSO_CPPFLAGS)', |
| bin => '$(BIN_CFLAGS) $(BIN_CPPFLAGS)' |
| } -> {$args{intent}}; |
| } |
| my $recipe; |
| # extension-specific rules |
| if (grep /\.s$/, @srcs) { |
| $recipe .= <<"EOF"; |
| $obj: $deps |
| $cmd $cmdflags -c -o \$\@ $srcs |
| EOF |
| } elsif (grep /\.S$/, @srcs) { |
| # Originally there was multi-step rule with $(CC) -E file.S |
| # followed by $(CC) -c file.s. It compensated for one of |
| # legacy platform compiler's inability to handle .S files. |
| # The platform is long discontinued by vendor so there is |
| # hardly a point to drag it along... |
| $recipe .= <<"EOF"; |
| $obj: $deps |
| $cmd $incs $defs $cmdflags -c -o \$\@ $srcs |
| EOF |
| } elsif ($makedep_scheme eq 'gcc' && !grep /\.rc$/, @srcs) { |
| $recipe .= <<"EOF"; |
| $obj: $deps |
| $cmd $incs $defs $cmdflags -MMD -MF $dep.tmp -MT \$\@ -c -o \$\@ $srcs |
| \@touch $dep.tmp |
| \@if cmp $dep.tmp $dep > /dev/null 2> /dev/null; then \\ |
| rm -f $dep.tmp; \\ |
| else \\ |
| mv $dep.tmp $dep; \\ |
| fi |
| EOF |
| } else { |
| $recipe .= <<"EOF"; |
| $obj: $deps |
| $cmd $incs $defs $cmdflags $cmdcompile -o \$\@ $srcs |
| EOF |
| if ($makedep_scheme eq 'makedepend') { |
| $recipe .= <<"EOF"; |
| \$(MAKEDEPEND) -f- -Y -- $incs $cmdflags -- $srcs 2>/dev/null \\ |
| > $dep |
| EOF |
| } |
| } |
| return $recipe; |
| } |
| # We *know* this routine is only called when we've configure 'shared'. |
| sub obj2shlib { |
| my %args = @_; |
| my @linkdirs = (); |
| my @linklibs = (); |
| foreach (@{$args{deps}}) { |
| if (platform->isstaticlib($_)) { |
| push @linklibs, platform->convertext($_); |
| } else { |
| my $d = "-L" . dirname($_); |
| my $l = basename($_); |
| $l =~ s/^lib//; |
| $l = "-l" . $l; |
| push @linklibs, $l; |
| push @linkdirs, $d unless grep { $d eq $_ } @linkdirs; |
| } |
| } |
| my $linkflags = join("", map { $_." " } @linkdirs); |
| my $linklibs = join("", map { $_." " } @linklibs); |
| my @objs = map { platform->convertext($_) } |
| grep { !platform->isdef($_) } |
| @{$args{objs}}; |
| my @defs = map { platform->def($_) } |
| grep { platform->isdef($_) } |
| @{$args{objs}}; |
| my @deps = compute_lib_depends(@{$args{deps}}); |
| die "More than one exported symbol map" if scalar @defs > 1; |
| |
| my $full = platform->sharedlib($args{lib}); |
| # $import is for Windows and subsystems thereof, where static import |
| # libraries for DLLs are a thing. On platforms that have this mechanism, |
| # $import has the name of this import library. On platforms that don't |
| # have this mechanism, $import will be |undef|. |
| my $import = platform->sharedlib_import($args{lib}); |
| # $simple is for platforms where full shared library names include the |
| # shared library version, and there's a simpler name that doesn't include |
| # that version. On such platforms, $simple has the simpler name. On |
| # other platforms, it will be |undef|. |
| my $simple = platform->sharedlib_simple($args{lib}); |
| |
| my $argfile = defined $target{shared_argfileflag} ? $full.".args" : undef; |
| my $shared_soname = ""; |
| $shared_soname .= ' '.$target{shared_sonameflag}.basename($full) |
| if defined $target{shared_sonameflag}; |
| my $shared_imp = ""; |
| $shared_imp .= ' '.$target{shared_impflag}.basename($import) |
| if defined $target{shared_impflag} && defined $import; |
| my $shared_def = join("", map { ' '.$target{shared_defflag}.$_ } @defs); |
| |
| # There is at least one platform where the compiler-as-linker needs to |
| # have one object file directly on the command line. That won't hurt |
| # any other platform, so we do that for everyone when there's an argfile |
| # to be had. This depends heavily on splice, which removes elements from |
| # the given array, and returns them so they can be captured. |
| my @argfileobjs = $argfile |
| ? splice(@objs, 1) |
| : (); |
| my $argfilecmds = $argfile |
| ? join("\n\t", map { "echo $_ >> $argfile" } @argfileobjs) |
| : undef; |
| my $argfiledeps = $argfile |
| ? join(" \\\n" . ' ' x (length($argfile) + 2), |
| fill_lines(' ', $COLUMNS - length($full) - 2, @argfileobjs)) |
| : undef; |
| my @fulldeps = (@objs, ($argfile ? $argfile : ()), @defs, @deps); |
| my @fullobjs = ( |
| @objs, |
| ($argfile ? $target{shared_argfileflag}.$argfile : ()) |
| ); |
| my $fulldeps = |
| join(" \\\n" . ' ' x (length($full) + 2), |
| fill_lines(' ', $COLUMNS - length($full) - 2, @fulldeps)); |
| my $fullobjs = |
| join(" \\\n\t\t", fill_lines(' ', $COLUMNS - 16, @fullobjs)); |
| |
| my $recipe = ''; |
| |
| if (defined $simple && $simple ne $full) { |
| if (sharedaix()) { |
| $recipe .= <<"EOF"; |
| $simple: $full |
| rm -f $simple && \\ |
| \$(AR) r $simple $full |
| EOF |
| } else { |
| $recipe .= <<"EOF"; |
| $simple: $full |
| rm -f $simple && \\ |
| ln -s $full $simple |
| EOF |
| } |
| } |
| if (defined $import) { |
| $recipe .= <<"EOF"; |
| $import: $full |
| EOF |
| } |
| $recipe .= <<"EOF"; |
| $full: $fulldeps |
| \$(CC) \$(LIB_CFLAGS) $linkflags\$(LIB_LDFLAGS)$shared_soname$shared_imp \\ |
| -o $full$shared_def \\ |
| $fullobjs \\ |
| $linklibs \$(LIB_EX_LIBS) |
| EOF |
| if (windowsdll()) { |
| $recipe .= <<"EOF"; |
| rm -f apps/$full |
| rm -f fuzz/$full |
| cp -p $full apps/ |
| cp -p $full fuzz/ |
| EOF |
| if (!$disabled{tests}) { |
| $recipe .= <<"EOF"; |
| rm -f test/$full |
| cp -p $full test/ |
| EOF |
| } |
| } |
| $recipe .= <<"EOF" if defined $argfile; |
| $argfile: $argfiledeps |
| \$(RM) $argfile |
| $argfilecmds |
| EOF |
| return $recipe; |
| } |
| sub obj2dso { |
| my %args = @_; |
| my $dso = platform->dso($args{module}); |
| my @linkdirs = (); |
| my @linklibs = (); |
| foreach (@{$args{deps}}) { |
| next unless defined $_; |
| if (platform->isstaticlib($_)) { |
| push @linklibs, platform->convertext($_); |
| } else { |
| my $d = "-L" . dirname($_); |
| my $l = basename($_); |
| $l =~ s/^lib//; |
| $l = "-l" . $l; |
| push @linklibs, $l; |
| push @linkdirs, $d unless grep { $d eq $_ } @linkdirs; |
| } |
| } |
| my $linkflags = join("", map { $_." " } @linkdirs); |
| my $linklibs = join("", map { $_." " } @linklibs); |
| my @objs = map { platform->convertext($_) } |
| grep { !platform->isdef($_) } |
| @{$args{objs}}; |
| my @defs = map { platform->def($_) } |
| grep { platform->isdef($_) } |
| @{$args{objs}}; |
| my @deps = compute_lib_depends(@{$args{deps}}); |
| my $shared_def = join("", map { ' '.$target{shared_defflag}.$_ } @defs); |
| # Next line needs to become "less magic" (see PR #11950) |
| $shared_def .= ' '.$target{shared_fipsflag} if (defined $target{shared_fipsflag} && $shared_def =~ m/providers\/fips/); |
| my $objs = join(" \\\n\t\t", fill_lines(' ', $COLUMNS - 16, @objs)); |
| my $deps = join(" \\\n" . ' ' x (length($dso) + 2), |
| fill_lines(' ', $COLUMNS - length($dso) - 2, |
| @objs, @defs, @deps)); |
| |
| return <<"EOF"; |
| $dso: $deps |
| \$(CC) \$(DSO_CFLAGS) $linkflags\$(DSO_LDFLAGS) \\ |
| -o $dso$shared_def \\ |
| $objs \\ |
| $linklibs\$(DSO_EX_LIBS) |
| EOF |
| } |
| sub obj2lib { |
| my %args = @_; |
| my $lib = platform->staticlib($args{lib}); |
| my @objs = map { platform->obj($_) } @{$args{objs}}; |
| my $deps = join(" \\\n" . ' ' x (length($lib) + 2), |
| fill_lines(' ', $COLUMNS - length($lib) - 2, @objs)); |
| my $max_per_call = 500; |
| my @objs_grouped; |
| push @objs_grouped, join(" ", splice @objs, 0, $max_per_call) while @objs; |
| my $fill_lib = |
| join("\n\t", (map { "\$(AR) \$(ARFLAGS) $lib $_" } @objs_grouped)); |
| return <<"EOF"; |
| $lib: $deps |
| \$(RM) $lib |
| $fill_lib |
| \$(RANLIB) \$\@ || echo Never mind. |
| EOF |
| } |
| sub obj2bin { |
| my %args = @_; |
| my $bin = platform->bin($args{bin}); |
| my @objs = map { platform->obj($_) } @{$args{objs}}; |
| my @deps = compute_lib_depends(@{$args{deps}}); |
| my $objs = join(" \\\n" . ' ' x (length($bin) + 2), |
| fill_lines(' ', $COLUMNS - length($bin) - 2, @objs)); |
| my @linkdirs = (); |
| my @linklibs = (); |
| foreach (@{$args{deps}}) { |
| next unless defined $_; |
| if (platform->isstaticlib($_)) { |
| push @linklibs, platform->convertext($_); |
| } else { |
| my $d = "-L" . dirname($_); |
| my $l = basename($_); |
| $l =~ s/^lib//; |
| $l = "-l" . $l; |
| push @linklibs, $l; |
| push @linkdirs, $d unless grep { $d eq $_ } @linkdirs; |
| } |
| } |
| my $linkflags = join("", map { $_." " } @linkdirs); |
| my $linklibs = join("", map { $_." " } @linklibs); |
| my $cmd = '$(CC)'; |
| my $cmdflags = '$(BIN_CFLAGS)'; |
| if (grep /_cc\.o$/, @{$args{objs}}) { |
| $cmd = '$(CXX)'; |
| $cmdflags = '$(BIN_CXXFLAGS)'; |
| } |
| |
| my $objs = join(" \\\n\t\t", fill_lines(' ', $COLUMNS - 16, @objs)); |
| my $deps = join(" \\\n" . ' ' x (length($bin) + 2), |
| fill_lines(' ', $COLUMNS - length($bin) - 2, |
| @objs, @deps)); |
| |
| return <<"EOF"; |
| $bin: $deps |
| rm -f $bin |
| \$\${LDCMD:-$cmd} $cmdflags $linkflags\$(BIN_LDFLAGS) \\ |
| -o $bin \\ |
| $objs \\ |
| $linklibs\$(BIN_EX_LIBS) |
| EOF |
| } |
| sub in2script { |
| my %args = @_; |
| my $script = $args{script}; |
| my $sources = join(" ", @{$args{sources}}); |
| my $dofile = abs2rel(rel2abs(catfile($config{sourcedir}, |
| "util", "dofile.pl")), |
| rel2abs($config{builddir})); |
| return <<"EOF"; |
| $script: $sources configdata.pm |
| \$(RM) "$script" |
| \$(PERL) "-I\$(BLDDIR)" -Mconfigdata "$dofile" \\ |
| "-o$target{build_file}" $sources > "$script" |
| chmod a+x $script |
| EOF |
| } |
| sub generatedir { |
| my %args = @_; |
| my $dir = $args{dir}; |
| my @deps = compute_platform_depends(@{$args{deps}}); |
| my @comments = (); |
| |
| # We already have a 'test' target, and the top directory is just plain |
| # silly |
| return if $dir eq "test" || $dir eq "."; |
| |
| foreach my $type (("dso", "lib", "bin", "script")) { |
| next unless defined($unified_info{dirinfo}->{$dir}->{products}->{$type}); |
| # For lib object files, we could update the library. However, it |
| # was decided that it's enough to build the directory local object |
| # files, so we don't need to add any actions, and the dependencies |
| # are already taken care of. |
| if ($type ne "lib") { |
| foreach my $prod (@{$unified_info{dirinfo}->{$dir}->{products}->{$type}}) { |
| if (dirname($prod) eq $dir) { |
| push @deps, compute_platform_depends($prod); |
| } else { |
| push @comments, "# No support to produce $type ".join(", ", @{$unified_info{dirinfo}->{$dir}->{products}->{$type}}); |
| } |
| } |
| } |
| } |
| |
| my $target = "$dir $dir/"; |
| my $deps = join(" \\\n\t", |
| fill_lines(' ', $COLUMNS - 8, @deps)); |
| my $comments = join("\n", "", @comments); |
| return <<"EOF"; |
| $target: \\ |
| $deps$comments |
| EOF |
| } |
| "" # Important! This becomes part of the template result. |
| -} |
