| /* |
| * Copyright 1995-2020 The OpenSSL Project Authors. All Rights Reserved. |
| * |
| * Licensed under the Apache License 2.0 (the "License"). You may not use |
| * this file except in compliance with the License. You can obtain a copy |
| * in the file LICENSE in the source distribution or at |
| * https://www.openssl.org/source/license.html |
| */ |
| |
| #include <assert.h> |
| #include <limits.h> |
| #include "internal/cryptlib.h" |
| #include "internal/endian.h" |
| #include "bn_local.h" |
| #include <openssl/opensslconf.h> |
| #include "internal/constant_time.h" |
| |
| /* This stuff appears to be completely unused, so is deprecated */ |
| #ifndef OPENSSL_NO_DEPRECATED_0_9_8 |
| /*- |
| * For a 32 bit machine |
| * 2 - 4 == 128 |
| * 3 - 8 == 256 |
| * 4 - 16 == 512 |
| * 5 - 32 == 1024 |
| * 6 - 64 == 2048 |
| * 7 - 128 == 4096 |
| * 8 - 256 == 8192 |
| */ |
| static int bn_limit_bits = 0; |
| static int bn_limit_num = 8; /* (1<<bn_limit_bits) */ |
| static int bn_limit_bits_low = 0; |
| static int bn_limit_num_low = 8; /* (1<<bn_limit_bits_low) */ |
| static int bn_limit_bits_high = 0; |
| static int bn_limit_num_high = 8; /* (1<<bn_limit_bits_high) */ |
| static int bn_limit_bits_mont = 0; |
| static int bn_limit_num_mont = 8; /* (1<<bn_limit_bits_mont) */ |
| |
| void BN_set_params(int mult, int high, int low, int mont) |
| { |
| if (mult >= 0) { |
| if (mult > (int)(sizeof(int) * 8) - 1) |
| mult = sizeof(int) * 8 - 1; |
| bn_limit_bits = mult; |
| bn_limit_num = 1 << mult; |
| } |
| if (high >= 0) { |
| if (high > (int)(sizeof(int) * 8) - 1) |
| high = sizeof(int) * 8 - 1; |
| bn_limit_bits_high = high; |
| bn_limit_num_high = 1 << high; |
| } |
| if (low >= 0) { |
| if (low > (int)(sizeof(int) * 8) - 1) |
| low = sizeof(int) * 8 - 1; |
| bn_limit_bits_low = low; |
| bn_limit_num_low = 1 << low; |
| } |
| if (mont >= 0) { |
| if (mont > (int)(sizeof(int) * 8) - 1) |
| mont = sizeof(int) * 8 - 1; |
| bn_limit_bits_mont = mont; |
| bn_limit_num_mont = 1 << mont; |
| } |
| } |
| |
| int BN_get_params(int which) |
| { |
| if (which == 0) |
| return bn_limit_bits; |
| else if (which == 1) |
| return bn_limit_bits_high; |
| else if (which == 2) |
| return bn_limit_bits_low; |
| else if (which == 3) |
| return bn_limit_bits_mont; |
| else |
| return 0; |
| } |
| #endif |
| |
| const BIGNUM *BN_value_one(void) |
| { |
| static const BN_ULONG data_one = 1L; |
| static const BIGNUM const_one = |
| { (BN_ULONG *)&data_one, 1, 1, 0, BN_FLG_STATIC_DATA }; |
| |
| return &const_one; |
| } |
| |
| /* |
| * Old Visual Studio ARM compiler miscompiles BN_num_bits_word() |
| * https://mta.openssl.org/pipermail/openssl-users/2018-August/008465.html |
| */ |
| #if defined(_MSC_VER) && defined(_ARM_) && defined(_WIN32_WCE) \ |
| && _MSC_VER>=1400 && _MSC_VER<1501 |
| # define MS_BROKEN_BN_num_bits_word |
| # pragma optimize("", off) |
| #endif |
| int BN_num_bits_word(BN_ULONG l) |
| { |
| BN_ULONG x, mask; |
| int bits = (l != 0); |
| |
| #if BN_BITS2 > 32 |
| x = l >> 32; |
| mask = (0 - x) & BN_MASK2; |
| mask = (0 - (mask >> (BN_BITS2 - 1))); |
| bits += 32 & mask; |
| l ^= (x ^ l) & mask; |
| #endif |
| |
| x = l >> 16; |
| mask = (0 - x) & BN_MASK2; |
| mask = (0 - (mask >> (BN_BITS2 - 1))); |
| bits += 16 & mask; |
| l ^= (x ^ l) & mask; |
| |
| x = l >> 8; |
| mask = (0 - x) & BN_MASK2; |
| mask = (0 - (mask >> (BN_BITS2 - 1))); |
| bits += 8 & mask; |
| l ^= (x ^ l) & mask; |
| |
| x = l >> 4; |
| mask = (0 - x) & BN_MASK2; |
| mask = (0 - (mask >> (BN_BITS2 - 1))); |
| bits += 4 & mask; |
| l ^= (x ^ l) & mask; |
| |
| x = l >> 2; |
| mask = (0 - x) & BN_MASK2; |
| mask = (0 - (mask >> (BN_BITS2 - 1))); |
| bits += 2 & mask; |
| l ^= (x ^ l) & mask; |
| |
| x = l >> 1; |
| mask = (0 - x) & BN_MASK2; |
| mask = (0 - (mask >> (BN_BITS2 - 1))); |
| bits += 1 & mask; |
| |
| return bits; |
| } |
| #ifdef MS_BROKEN_BN_num_bits_word |
| # pragma optimize("", on) |
| #endif |
| |
| /* |
| * This function still leaks `a->dmax`: it's caller's responsibility to |
| * expand the input `a` in advance to a public length. |
| */ |
| static ossl_inline |
| int bn_num_bits_consttime(const BIGNUM *a) |
| { |
| int j, ret; |
| unsigned int mask, past_i; |
| int i = a->top - 1; |
| bn_check_top(a); |
| |
| for (j = 0, past_i = 0, ret = 0; j < a->dmax; j++) { |
| mask = constant_time_eq_int(i, j); /* 0xff..ff if i==j, 0x0 otherwise */ |
| |
| ret += BN_BITS2 & (~mask & ~past_i); |
| ret += BN_num_bits_word(a->d[j]) & mask; |
| |
| past_i |= mask; /* past_i will become 0xff..ff after i==j */ |
| } |
| |
| /* |
| * if BN_is_zero(a) => i is -1 and ret contains garbage, so we mask the |
| * final result. |
| */ |
| mask = ~(constant_time_eq_int(i, ((int)-1))); |
| |
| return ret & mask; |
| } |
| |
| int BN_num_bits(const BIGNUM *a) |
| { |
| int i = a->top - 1; |
| bn_check_top(a); |
| |
| if (a->flags & BN_FLG_CONSTTIME) { |
| /* |
| * We assume that BIGNUMs flagged as CONSTTIME have also been expanded |
| * so that a->dmax is not leaking secret information. |
| * |
| * In other words, it's the caller's responsibility to ensure `a` has |
| * been preallocated in advance to a public length if we hit this |
| * branch. |
| * |
| */ |
| return bn_num_bits_consttime(a); |
| } |
| |
| if (BN_is_zero(a)) |
| return 0; |
| |
| return ((i * BN_BITS2) + BN_num_bits_word(a->d[i])); |
| } |
| |
| static void bn_free_d(BIGNUM *a, int clear) |
| { |
| if (BN_get_flags(a, BN_FLG_SECURE)) |
| OPENSSL_secure_clear_free(a->d, a->dmax * sizeof(a->d[0])); |
| else if (clear != 0) |
| OPENSSL_clear_free(a->d, a->dmax * sizeof(a->d[0])); |
| else |
| OPENSSL_free(a->d); |
| } |
| |
| |
| void BN_clear_free(BIGNUM *a) |
| { |
| if (a == NULL) |
| return; |
| if (a->d != NULL && !BN_get_flags(a, BN_FLG_STATIC_DATA)) |
| bn_free_d(a, 1); |
| if (BN_get_flags(a, BN_FLG_MALLOCED)) { |
| OPENSSL_cleanse(a, sizeof(*a)); |
| OPENSSL_free(a); |
| } |
| } |
| |
| void BN_free(BIGNUM *a) |
| { |
| if (a == NULL) |
| return; |
| if (!BN_get_flags(a, BN_FLG_STATIC_DATA)) |
| bn_free_d(a, 0); |
| if (a->flags & BN_FLG_MALLOCED) |
| OPENSSL_free(a); |
| } |
| |
| void bn_init(BIGNUM *a) |
| { |
| static BIGNUM nilbn; |
| |
| *a = nilbn; |
| bn_check_top(a); |
| } |
| |
| BIGNUM *BN_new(void) |
| { |
| BIGNUM *ret; |
| |
| if ((ret = OPENSSL_zalloc(sizeof(*ret))) == NULL) { |
| ERR_raise(ERR_LIB_BN, ERR_R_MALLOC_FAILURE); |
| return NULL; |
| } |
| ret->flags = BN_FLG_MALLOCED; |
| bn_check_top(ret); |
| return ret; |
| } |
| |
| BIGNUM *BN_secure_new(void) |
| { |
| BIGNUM *ret = BN_new(); |
| if (ret != NULL) |
| ret->flags |= BN_FLG_SECURE; |
| return ret; |
| } |
| |
| /* This is used by bn_expand2() */ |
| /* The caller MUST check that words > b->dmax before calling this */ |
| static BN_ULONG *bn_expand_internal(const BIGNUM *b, int words) |
| { |
| BN_ULONG *a = NULL; |
| |
| if (words > (INT_MAX / (4 * BN_BITS2))) { |
| ERR_raise(ERR_LIB_BN, BN_R_BIGNUM_TOO_LONG); |
| return NULL; |
| } |
| if (BN_get_flags(b, BN_FLG_STATIC_DATA)) { |
| ERR_raise(ERR_LIB_BN, BN_R_EXPAND_ON_STATIC_BIGNUM_DATA); |
| return NULL; |
| } |
| if (BN_get_flags(b, BN_FLG_SECURE)) |
| a = OPENSSL_secure_zalloc(words * sizeof(*a)); |
| else |
| a = OPENSSL_zalloc(words * sizeof(*a)); |
| if (a == NULL) { |
| ERR_raise(ERR_LIB_BN, ERR_R_MALLOC_FAILURE); |
| return NULL; |
| } |
| |
| assert(b->top <= words); |
| if (b->top > 0) |
| memcpy(a, b->d, sizeof(*a) * b->top); |
| |
| return a; |
| } |
| |
| /* |
| * This is an internal function that should not be used in applications. It |
| * ensures that 'b' has enough room for a 'words' word number and initialises |
| * any unused part of b->d with leading zeros. It is mostly used by the |
| * various BIGNUM routines. If there is an error, NULL is returned. If not, |
| * 'b' is returned. |
| */ |
| |
| BIGNUM *bn_expand2(BIGNUM *b, int words) |
| { |
| if (words > b->dmax) { |
| BN_ULONG *a = bn_expand_internal(b, words); |
| if (!a) |
| return NULL; |
| if (b->d != NULL) |
| bn_free_d(b, 1); |
| b->d = a; |
| b->dmax = words; |
| } |
| |
| return b; |
| } |
| |
| BIGNUM *BN_dup(const BIGNUM *a) |
| { |
| BIGNUM *t; |
| |
| if (a == NULL) |
| return NULL; |
| bn_check_top(a); |
| |
| t = BN_get_flags(a, BN_FLG_SECURE) ? BN_secure_new() : BN_new(); |
| if (t == NULL) |
| return NULL; |
| if (!BN_copy(t, a)) { |
| BN_free(t); |
| return NULL; |
| } |
| bn_check_top(t); |
| return t; |
| } |
| |
| BIGNUM *BN_copy(BIGNUM *a, const BIGNUM *b) |
| { |
| int bn_words; |
| |
| bn_check_top(b); |
| |
| bn_words = BN_get_flags(b, BN_FLG_CONSTTIME) ? b->dmax : b->top; |
| |
| if (a == b) |
| return a; |
| if (bn_wexpand(a, bn_words) == NULL) |
| return NULL; |
| |
| if (b->top > 0) |
| memcpy(a->d, b->d, sizeof(b->d[0]) * bn_words); |
| |
| a->neg = b->neg; |
| a->top = b->top; |
| a->flags |= b->flags & BN_FLG_FIXED_TOP; |
| bn_check_top(a); |
| return a; |
| } |
| |
| #define FLAGS_DATA(flags) ((flags) & (BN_FLG_STATIC_DATA \ |
| | BN_FLG_CONSTTIME \ |
| | BN_FLG_SECURE \ |
| | BN_FLG_FIXED_TOP)) |
| #define FLAGS_STRUCT(flags) ((flags) & (BN_FLG_MALLOCED)) |
| |
| void BN_swap(BIGNUM *a, BIGNUM *b) |
| { |
| int flags_old_a, flags_old_b; |
| BN_ULONG *tmp_d; |
| int tmp_top, tmp_dmax, tmp_neg; |
| |
| bn_check_top(a); |
| bn_check_top(b); |
| |
| flags_old_a = a->flags; |
| flags_old_b = b->flags; |
| |
| tmp_d = a->d; |
| tmp_top = a->top; |
| tmp_dmax = a->dmax; |
| tmp_neg = a->neg; |
| |
| a->d = b->d; |
| a->top = b->top; |
| a->dmax = b->dmax; |
| a->neg = b->neg; |
| |
| b->d = tmp_d; |
| b->top = tmp_top; |
| b->dmax = tmp_dmax; |
| b->neg = tmp_neg; |
| |
| a->flags = FLAGS_STRUCT(flags_old_a) | FLAGS_DATA(flags_old_b); |
| b->flags = FLAGS_STRUCT(flags_old_b) | FLAGS_DATA(flags_old_a); |
| bn_check_top(a); |
| bn_check_top(b); |
| } |
| |
| void BN_clear(BIGNUM *a) |
| { |
| if (a == NULL) |
| return; |
| bn_check_top(a); |
| if (a->d != NULL) |
| OPENSSL_cleanse(a->d, sizeof(*a->d) * a->dmax); |
| a->neg = 0; |
| a->top = 0; |
| a->flags &= ~BN_FLG_FIXED_TOP; |
| } |
| |
| BN_ULONG BN_get_word(const BIGNUM *a) |
| { |
| if (a->top > 1) |
| return BN_MASK2; |
| else if (a->top == 1) |
| return a->d[0]; |
| /* a->top == 0 */ |
| return 0; |
| } |
| |
| int BN_set_word(BIGNUM *a, BN_ULONG w) |
| { |
| bn_check_top(a); |
| if (bn_expand(a, (int)sizeof(BN_ULONG) * 8) == NULL) |
| return 0; |
| a->neg = 0; |
| a->d[0] = w; |
| a->top = (w ? 1 : 0); |
| a->flags &= ~BN_FLG_FIXED_TOP; |
| bn_check_top(a); |
| return 1; |
| } |
| |
| typedef enum {BIG, LITTLE} endianess_t; |
| typedef enum {SIGNED, UNSIGNED} signedness_t; |
| |
| static BIGNUM *bin2bn(const unsigned char *s, int len, BIGNUM *ret, |
| endianess_t endianess, signedness_t signedness) |
| { |
| int inc; |
| const unsigned char *s2; |
| int inc2; |
| int neg = 0, xor = 0, carry = 0; |
| unsigned int i; |
| unsigned int n; |
| BIGNUM *bn = NULL; |
| |
| if (ret == NULL) |
| ret = bn = BN_new(); |
| if (ret == NULL) |
| return NULL; |
| bn_check_top(ret); |
| |
| /* |
| * The loop that does the work iterates from least to most |
| * significant BIGNUM chunk, so we adapt parameters to transfer |
| * input bytes accordingly. |
| */ |
| if (endianess == LITTLE) { |
| s2 = s + len - 1; |
| inc2 = -1; |
| inc = 1; |
| } else { |
| s2 = s; |
| inc2 = 1; |
| inc = -1; |
| s += len - 1; |
| } |
| |
| /* Take note of the signedness of the input bytes*/ |
| if (signedness == SIGNED) { |
| neg = !!(*s2 & 0x80); |
| xor = neg ? 0xff : 0x00; |
| carry = neg; |
| } |
| |
| /* |
| * Skip leading sign extensions (the value of |xor|). |
| * This is the only spot where |s2| and |inc2| are used. |
| */ |
| for ( ; len > 0 && *s2 == xor; s2 += inc2, len--) |
| continue; |
| |
| /* |
| * If there was a set of 0xff, we backtrack one byte unless the next |
| * one has a sign bit, as the last 0xff is then part of the actual |
| * number, rather then a mere sign extension. |
| */ |
| if (xor == 0xff) { |
| if (len == 0 || !(*s2 & 0x80)) |
| len++; |
| } |
| /* If it was all zeros, we're done */ |
| if (len == 0) { |
| ret->top = 0; |
| return ret; |
| } |
| n = ((len - 1) / BN_BYTES) + 1; /* Number of resulting bignum chunks */ |
| if (!ossl_assert(bn_wexpand(ret, (int)n) != NULL)) { |
| BN_free(bn); |
| return NULL; |
| } |
| ret->top = n; |
| ret->neg = neg; |
| for (i = 0; n-- > 0; i++) { |
| BN_ULONG l = 0; /* Accumulator */ |
| unsigned int m = 0; /* Offset in a bignum chunk, in bits */ |
| |
| for (; len > 0 && m < BN_BYTES * 8; len--, s += inc, m += 8) { |
| BN_ULONG byte_xored = *s ^ xor; |
| BN_ULONG byte = (byte_xored + carry) & 0xff; |
| |
| carry = byte_xored > byte; /* Implicit 1 or 0 */ |
| l |= (byte << m); |
| } |
| ret->d[i] = l; |
| } |
| /* |
| * need to call this due to clear byte at top if avoiding having the top |
| * bit set (-ve number) |
| */ |
| bn_correct_top(ret); |
| return ret; |
| } |
| |
| BIGNUM *BN_bin2bn(const unsigned char *s, int len, BIGNUM *ret) |
| { |
| return bin2bn(s, len, ret, BIG, UNSIGNED); |
| } |
| |
| BIGNUM *BN_signed_bin2bn(const unsigned char *s, int len, BIGNUM *ret) |
| { |
| return bin2bn(s, len, ret, BIG, SIGNED); |
| } |
| |
| static int bn2binpad(const BIGNUM *a, unsigned char *to, int tolen, |
| endianess_t endianess, signedness_t signedness) |
| { |
| int inc; |
| int n, n8; |
| int xor = 0, carry = 0, ext = 0; |
| size_t i, lasti, j, atop, mask; |
| BN_ULONG l; |
| |
| /* |
| * In case |a| is fixed-top, BN_num_bits can return bogus length, |
| * but it's assumed that fixed-top inputs ought to be "nominated" |
| * even for padded output, so it works out... |
| */ |
| n8 = BN_num_bits(a); |
| n = (n8 + 7) / 8; /* This is what BN_num_bytes() does */ |
| |
| /* Take note of the signedness of the bignum */ |
| if (signedness == SIGNED) { |
| xor = a->neg ? 0xff : 0x00; |
| carry = a->neg; |
| |
| /* |
| * if |n * 8 == n|, then the MSbit is set, otherwise unset. |
| * We must compensate with one extra byte if that doesn't |
| * correspond to the signedness of the bignum with regards |
| * to 2's complement. |
| */ |
| ext = (n * 8 == n8) |
| ? !a->neg /* MSbit set on nonnegative bignum */ |
| : a->neg; /* MSbit unset on negative bignum */ |
| } |
| |
| if (tolen == -1) { |
| tolen = n + ext; |
| } else if (tolen < n + ext) { /* uncommon/unlike case */ |
| BIGNUM temp = *a; |
| |
| bn_correct_top(&temp); |
| n8 = BN_num_bits(&temp); |
| n = (n8 + 7) / 8; /* This is what BN_num_bytes() does */ |
| if (tolen < n + ext) |
| return -1; |
| } |
| |
| /* Swipe through whole available data and don't give away padded zero. */ |
| atop = a->dmax * BN_BYTES; |
| if (atop == 0) { |
| if (tolen != 0) |
| memset(to, '\0', tolen); |
| return tolen; |
| } |
| |
| /* |
| * The loop that does the work iterates from least significant |
| * to most significant BIGNUM limb, so we adapt parameters to |
| * transfer output bytes accordingly. |
| */ |
| if (endianess == LITTLE) { |
| inc = 1; |
| } else { |
| inc = -1; |
| to += tolen - 1; /* Move to the last byte, not beyond */ |
| } |
| |
| lasti = atop - 1; |
| atop = a->top * BN_BYTES; |
| for (i = 0, j = 0; j < (size_t)tolen; j++) { |
| unsigned char byte, byte_xored; |
| |
| l = a->d[i / BN_BYTES]; |
| mask = 0 - ((j - atop) >> (8 * sizeof(i) - 1)); |
| byte = (unsigned char)(l >> (8 * (i % BN_BYTES)) & mask); |
| byte_xored = byte ^ xor; |
| *to = (unsigned char)(byte_xored + carry); |
| carry = byte_xored > *to; /* Implicit 1 or 0 */ |
| to += inc; |
| i += (i - lasti) >> (8 * sizeof(i) - 1); /* stay on last limb */ |
| } |
| |
| return tolen; |
| } |
| |
| int BN_bn2binpad(const BIGNUM *a, unsigned char *to, int tolen) |
| { |
| if (tolen < 0) |
| return -1; |
| return bn2binpad(a, to, tolen, BIG, UNSIGNED); |
| } |
| |
| int BN_signed_bn2bin(const BIGNUM *a, unsigned char *to, int tolen) |
| { |
| if (tolen < 0) |
| return -1; |
| return bn2binpad(a, to, tolen, BIG, SIGNED); |
| } |
| |
| int BN_bn2bin(const BIGNUM *a, unsigned char *to) |
| { |
| return bn2binpad(a, to, -1, BIG, UNSIGNED); |
| } |
| |
| BIGNUM *BN_lebin2bn(const unsigned char *s, int len, BIGNUM *ret) |
| { |
| return bin2bn(s, len, ret, LITTLE, UNSIGNED); |
| } |
| |
| BIGNUM *BN_signed_lebin2bn(const unsigned char *s, int len, BIGNUM *ret) |
| { |
| return bin2bn(s, len, ret, LITTLE, SIGNED); |
| } |
| |
| int BN_bn2lebinpad(const BIGNUM *a, unsigned char *to, int tolen) |
| { |
| if (tolen < 0) |
| return -1; |
| return bn2binpad(a, to, tolen, LITTLE, UNSIGNED); |
| } |
| |
| int BN_signed_bn2lebin(const BIGNUM *a, unsigned char *to, int tolen) |
| { |
| if (tolen < 0) |
| return -1; |
| return bn2binpad(a, to, tolen, LITTLE, SIGNED); |
| } |
| |
| BIGNUM *BN_native2bn(const unsigned char *s, int len, BIGNUM *ret) |
| { |
| DECLARE_IS_ENDIAN; |
| |
| if (IS_LITTLE_ENDIAN) |
| return BN_lebin2bn(s, len, ret); |
| return BN_bin2bn(s, len, ret); |
| } |
| |
| BIGNUM *BN_signed_native2bn(const unsigned char *s, int len, BIGNUM *ret) |
| { |
| DECLARE_IS_ENDIAN; |
| |
| if (IS_LITTLE_ENDIAN) |
| return BN_signed_lebin2bn(s, len, ret); |
| return BN_signed_bin2bn(s, len, ret); |
| } |
| |
| int BN_bn2nativepad(const BIGNUM *a, unsigned char *to, int tolen) |
| { |
| DECLARE_IS_ENDIAN; |
| |
| if (IS_LITTLE_ENDIAN) |
| return BN_bn2lebinpad(a, to, tolen); |
| return BN_bn2binpad(a, to, tolen); |
| } |
| |
| int BN_signed_bn2native(const BIGNUM *a, unsigned char *to, int tolen) |
| { |
| DECLARE_IS_ENDIAN; |
| |
| if (IS_LITTLE_ENDIAN) |
| return BN_signed_bn2lebin(a, to, tolen); |
| return BN_signed_bn2bin(a, to, tolen); |
| } |
| |
| int BN_ucmp(const BIGNUM *a, const BIGNUM *b) |
| { |
| int i; |
| BN_ULONG t1, t2, *ap, *bp; |
| |
| bn_check_top(a); |
| bn_check_top(b); |
| |
| i = a->top - b->top; |
| if (i != 0) |
| return i; |
| ap = a->d; |
| bp = b->d; |
| for (i = a->top - 1; i >= 0; i--) { |
| t1 = ap[i]; |
| t2 = bp[i]; |
| if (t1 != t2) |
| return ((t1 > t2) ? 1 : -1); |
| } |
| return 0; |
| } |
| |
| int BN_cmp(const BIGNUM *a, const BIGNUM *b) |
| { |
| int i; |
| int gt, lt; |
| BN_ULONG t1, t2; |
| |
| if ((a == NULL) || (b == NULL)) { |
| if (a != NULL) |
| return -1; |
| else if (b != NULL) |
| return 1; |
| else |
| return 0; |
| } |
| |
| bn_check_top(a); |
| bn_check_top(b); |
| |
| if (a->neg != b->neg) { |
| if (a->neg) |
| return -1; |
| else |
| return 1; |
| } |
| if (a->neg == 0) { |
| gt = 1; |
| lt = -1; |
| } else { |
| gt = -1; |
| lt = 1; |
| } |
| |
| if (a->top > b->top) |
| return gt; |
| if (a->top < b->top) |
| return lt; |
| for (i = a->top - 1; i >= 0; i--) { |
| t1 = a->d[i]; |
| t2 = b->d[i]; |
| if (t1 > t2) |
| return gt; |
| if (t1 < t2) |
| return lt; |
| } |
| return 0; |
| } |
| |
| int BN_set_bit(BIGNUM *a, int n) |
| { |
| int i, j, k; |
| |
| if (n < 0) |
| return 0; |
| |
| i = n / BN_BITS2; |
| j = n % BN_BITS2; |
| if (a->top <= i) { |
| if (bn_wexpand(a, i + 1) == NULL) |
| return 0; |
| for (k = a->top; k < i + 1; k++) |
| a->d[k] = 0; |
| a->top = i + 1; |
| a->flags &= ~BN_FLG_FIXED_TOP; |
| } |
| |
| a->d[i] |= (((BN_ULONG)1) << j); |
| bn_check_top(a); |
| return 1; |
| } |
| |
| int BN_clear_bit(BIGNUM *a, int n) |
| { |
| int i, j; |
| |
| bn_check_top(a); |
| if (n < 0) |
| return 0; |
| |
| i = n / BN_BITS2; |
| j = n % BN_BITS2; |
| if (a->top <= i) |
| return 0; |
| |
| a->d[i] &= (~(((BN_ULONG)1) << j)); |
| bn_correct_top(a); |
| return 1; |
| } |
| |
| int BN_is_bit_set(const BIGNUM *a, int n) |
| { |
| int i, j; |
| |
| bn_check_top(a); |
| if (n < 0) |
| return 0; |
| i = n / BN_BITS2; |
| j = n % BN_BITS2; |
| if (a->top <= i) |
| return 0; |
| return (int)(((a->d[i]) >> j) & ((BN_ULONG)1)); |
| } |
| |
| int BN_mask_bits(BIGNUM *a, int n) |
| { |
| int b, w; |
| |
| bn_check_top(a); |
| if (n < 0) |
| return 0; |
| |
| w = n / BN_BITS2; |
| b = n % BN_BITS2; |
| if (w >= a->top) |
| return 0; |
| if (b == 0) |
| a->top = w; |
| else { |
| a->top = w + 1; |
| a->d[w] &= ~(BN_MASK2 << b); |
| } |
| bn_correct_top(a); |
| return 1; |
| } |
| |
| void BN_set_negative(BIGNUM *a, int b) |
| { |
| if (b && !BN_is_zero(a)) |
| a->neg = 1; |
| else |
| a->neg = 0; |
| } |
| |
| int bn_cmp_words(const BN_ULONG *a, const BN_ULONG *b, int n) |
| { |
| int i; |
| BN_ULONG aa, bb; |
| |
| if (n == 0) |
| return 0; |
| |
| aa = a[n - 1]; |
| bb = b[n - 1]; |
| if (aa != bb) |
| return ((aa > bb) ? 1 : -1); |
| for (i = n - 2; i >= 0; i--) { |
| aa = a[i]; |
| bb = b[i]; |
| if (aa != bb) |
| return ((aa > bb) ? 1 : -1); |
| } |
| return 0; |
| } |
| |
| /* |
| * Here follows a specialised variants of bn_cmp_words(). It has the |
| * capability of performing the operation on arrays of different sizes. The |
| * sizes of those arrays is expressed through cl, which is the common length |
| * ( basically, min(len(a),len(b)) ), and dl, which is the delta between the |
| * two lengths, calculated as len(a)-len(b). All lengths are the number of |
| * BN_ULONGs... |
| */ |
| |
| int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b, int cl, int dl) |
| { |
| int n, i; |
| n = cl - 1; |
| |
| if (dl < 0) { |
| for (i = dl; i < 0; i++) { |
| if (b[n - i] != 0) |
| return -1; /* a < b */ |
| } |
| } |
| if (dl > 0) { |
| for (i = dl; i > 0; i--) { |
| if (a[n + i] != 0) |
| return 1; /* a > b */ |
| } |
| } |
| return bn_cmp_words(a, b, cl); |
| } |
| |
| /*- |
| * Constant-time conditional swap of a and b. |
| * a and b are swapped if condition is not 0. |
| * nwords is the number of words to swap. |
| * Assumes that at least nwords are allocated in both a and b. |
| * Assumes that no more than nwords are used by either a or b. |
| */ |
| void BN_consttime_swap(BN_ULONG condition, BIGNUM *a, BIGNUM *b, int nwords) |
| { |
| BN_ULONG t; |
| int i; |
| |
| if (a == b) |
| return; |
| |
| bn_wcheck_size(a, nwords); |
| bn_wcheck_size(b, nwords); |
| |
| condition = ((~condition & ((condition - 1))) >> (BN_BITS2 - 1)) - 1; |
| |
| t = (a->top ^ b->top) & condition; |
| a->top ^= t; |
| b->top ^= t; |
| |
| t = (a->neg ^ b->neg) & condition; |
| a->neg ^= t; |
| b->neg ^= t; |
| |
| /*- |
| * BN_FLG_STATIC_DATA: indicates that data may not be written to. Intention |
| * is actually to treat it as it's read-only data, and some (if not most) |
| * of it does reside in read-only segment. In other words observation of |
| * BN_FLG_STATIC_DATA in BN_consttime_swap should be treated as fatal |
| * condition. It would either cause SEGV or effectively cause data |
| * corruption. |
| * |
| * BN_FLG_MALLOCED: refers to BN structure itself, and hence must be |
| * preserved. |
| * |
| * BN_FLG_SECURE: must be preserved, because it determines how x->d was |
| * allocated and hence how to free it. |
| * |
| * BN_FLG_CONSTTIME: sufficient to mask and swap |
| * |
| * BN_FLG_FIXED_TOP: indicates that we haven't called bn_correct_top() on |
| * the data, so the d array may be padded with additional 0 values (i.e. |
| * top could be greater than the minimal value that it could be). We should |
| * be swapping it |
| */ |
| |
| #define BN_CONSTTIME_SWAP_FLAGS (BN_FLG_CONSTTIME | BN_FLG_FIXED_TOP) |
| |
| t = ((a->flags ^ b->flags) & BN_CONSTTIME_SWAP_FLAGS) & condition; |
| a->flags ^= t; |
| b->flags ^= t; |
| |
| /* conditionally swap the data */ |
| for (i = 0; i < nwords; i++) { |
| t = (a->d[i] ^ b->d[i]) & condition; |
| a->d[i] ^= t; |
| b->d[i] ^= t; |
| } |
| } |
| |
| #undef BN_CONSTTIME_SWAP_FLAGS |
| |
| /* Bits of security, see SP800-57 */ |
| |
| int BN_security_bits(int L, int N) |
| { |
| int secbits, bits; |
| if (L >= 15360) |
| secbits = 256; |
| else if (L >= 7680) |
| secbits = 192; |
| else if (L >= 3072) |
| secbits = 128; |
| else if (L >= 2048) |
| secbits = 112; |
| else if (L >= 1024) |
| secbits = 80; |
| else |
| return 0; |
| if (N == -1) |
| return secbits; |
| bits = N / 2; |
| if (bits < 80) |
| return 0; |
| return bits >= secbits ? secbits : bits; |
| } |
| |
| void BN_zero_ex(BIGNUM *a) |
| { |
| a->neg = 0; |
| a->top = 0; |
| a->flags &= ~BN_FLG_FIXED_TOP; |
| } |
| |
| int BN_abs_is_word(const BIGNUM *a, const BN_ULONG w) |
| { |
| return ((a->top == 1) && (a->d[0] == w)) || ((w == 0) && (a->top == 0)); |
| } |
| |
| int BN_is_zero(const BIGNUM *a) |
| { |
| return a->top == 0; |
| } |
| |
| int BN_is_one(const BIGNUM *a) |
| { |
| return BN_abs_is_word(a, 1) && !a->neg; |
| } |
| |
| int BN_is_word(const BIGNUM *a, const BN_ULONG w) |
| { |
| return BN_abs_is_word(a, w) && (!w || !a->neg); |
| } |
| |
| int BN_is_odd(const BIGNUM *a) |
| { |
| return (a->top > 0) && (a->d[0] & 1); |
| } |
| |
| int BN_is_negative(const BIGNUM *a) |
| { |
| return (a->neg != 0); |
| } |
| |
| int BN_to_montgomery(BIGNUM *r, const BIGNUM *a, BN_MONT_CTX *mont, |
| BN_CTX *ctx) |
| { |
| return BN_mod_mul_montgomery(r, a, &(mont->RR), mont, ctx); |
| } |
| |
| void BN_with_flags(BIGNUM *dest, const BIGNUM *b, int flags) |
| { |
| dest->d = b->d; |
| dest->top = b->top; |
| dest->dmax = b->dmax; |
| dest->neg = b->neg; |
| dest->flags = ((dest->flags & BN_FLG_MALLOCED) |
| | (b->flags & ~BN_FLG_MALLOCED) |
| | BN_FLG_STATIC_DATA | flags); |
| } |
| |
| BN_GENCB *BN_GENCB_new(void) |
| { |
| BN_GENCB *ret; |
| |
| if ((ret = OPENSSL_malloc(sizeof(*ret))) == NULL) { |
| ERR_raise(ERR_LIB_BN, ERR_R_MALLOC_FAILURE); |
| return NULL; |
| } |
| |
| return ret; |
| } |
| |
| void BN_GENCB_free(BN_GENCB *cb) |
| { |
| if (cb == NULL) |
| return; |
| OPENSSL_free(cb); |
| } |
| |
| void BN_set_flags(BIGNUM *b, int n) |
| { |
| b->flags |= n; |
| } |
| |
| int BN_get_flags(const BIGNUM *b, int n) |
| { |
| return b->flags & n; |
| } |
| |
| /* Populate a BN_GENCB structure with an "old"-style callback */ |
| void BN_GENCB_set_old(BN_GENCB *gencb, void (*callback) (int, int, void *), |
| void *cb_arg) |
| { |
| BN_GENCB *tmp_gencb = gencb; |
| tmp_gencb->ver = 1; |
| tmp_gencb->arg = cb_arg; |
| tmp_gencb->cb.cb_1 = callback; |
| } |
| |
| /* Populate a BN_GENCB structure with a "new"-style callback */ |
| void BN_GENCB_set(BN_GENCB *gencb, int (*callback) (int, int, BN_GENCB *), |
| void *cb_arg) |
| { |
| BN_GENCB *tmp_gencb = gencb; |
| tmp_gencb->ver = 2; |
| tmp_gencb->arg = cb_arg; |
| tmp_gencb->cb.cb_2 = callback; |
| } |
| |
| void *BN_GENCB_get_arg(BN_GENCB *cb) |
| { |
| return cb->arg; |
| } |
| |
| BIGNUM *bn_wexpand(BIGNUM *a, int words) |
| { |
| return (words <= a->dmax) ? a : bn_expand2(a, words); |
| } |
| |
| void bn_correct_top(BIGNUM *a) |
| { |
| BN_ULONG *ftl; |
| int tmp_top = a->top; |
| |
| if (tmp_top > 0) { |
| for (ftl = &(a->d[tmp_top]); tmp_top > 0; tmp_top--) { |
| ftl--; |
| if (*ftl != 0) |
| break; |
| } |
| a->top = tmp_top; |
| } |
| if (a->top == 0) |
| a->neg = 0; |
| a->flags &= ~BN_FLG_FIXED_TOP; |
| bn_pollute(a); |
| } |