| /* |
| * Copyright 2016 The OpenSSL Project Authors. All Rights Reserved. |
| * |
| * Licensed under the OpenSSL license (the "License"). You may not use |
| * this file except in compliance with the License. You can obtain a copy |
| * in the file LICENSE in the source distribution or at |
| * https://www.openssl.org/source/license.html |
| */ |
| |
| #include <internal/cryptlib_int.h> |
| #include <openssl/err.h> |
| #include <internal/rand.h> |
| #include <internal/bio.h> |
| #include <openssl/evp.h> |
| #include <internal/evp_int.h> |
| #include <internal/conf.h> |
| #include <internal/async.h> |
| #include <internal/engine.h> |
| #include <internal/comp.h> |
| #include <internal/err.h> |
| #include <internal/err_int.h> |
| #include <internal/objects.h> |
| #include <stdlib.h> |
| #include <assert.h> |
| #include <internal/thread_once.h> |
| #include <internal/dso.h> |
| |
| static int stopped = 0; |
| |
| static void ossl_init_thread_stop(struct thread_local_inits_st *locals); |
| |
| static CRYPTO_THREAD_LOCAL threadstopkey; |
| |
| static void ossl_init_thread_stop_wrap(void *local) |
| { |
| ossl_init_thread_stop((struct thread_local_inits_st *)local); |
| } |
| |
| static struct thread_local_inits_st *ossl_init_get_thread_local(int alloc) |
| { |
| struct thread_local_inits_st *local = |
| CRYPTO_THREAD_get_local(&threadstopkey); |
| |
| if (local == NULL && alloc) { |
| local = OPENSSL_zalloc(sizeof *local); |
| CRYPTO_THREAD_set_local(&threadstopkey, local); |
| } |
| if (!alloc) { |
| CRYPTO_THREAD_set_local(&threadstopkey, NULL); |
| } |
| |
| return local; |
| } |
| |
| typedef struct ossl_init_stop_st OPENSSL_INIT_STOP; |
| struct ossl_init_stop_st { |
| void (*handler)(void); |
| OPENSSL_INIT_STOP *next; |
| }; |
| |
| static OPENSSL_INIT_STOP *stop_handlers = NULL; |
| static CRYPTO_RWLOCK *init_lock = NULL; |
| |
| static CRYPTO_ONCE base = CRYPTO_ONCE_STATIC_INIT; |
| static int base_inited = 0; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_base) |
| { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_base: Setting up stop handlers\n"); |
| #endif |
| #ifndef OPENSSL_NO_CRYPTO_MDEBUG |
| ossl_malloc_setup_failures(); |
| #endif |
| /* |
| * We use a dummy thread local key here. We use the destructor to detect |
| * when the thread is going to stop (where that feature is available) |
| */ |
| CRYPTO_THREAD_init_local(&threadstopkey, ossl_init_thread_stop_wrap); |
| #ifndef OPENSSL_SYS_UEFI |
| atexit(OPENSSL_cleanup); |
| #endif |
| if ((init_lock = CRYPTO_THREAD_lock_new()) == NULL) |
| return 0; |
| OPENSSL_cpuid_setup(); |
| |
| /* |
| * BIG FAT WARNING! |
| * Everything needed to be initialized in this function before threads |
| * come along MUST happen before base_inited is set to 1, or we will |
| * see race conditions. |
| */ |
| base_inited = 1; |
| |
| #if !defined(OPENSSL_NO_DSO) && !defined(OPENSSL_USE_NODELETE) |
| # ifdef DSO_WIN32 |
| { |
| HMODULE handle = NULL; |
| BOOL ret; |
| |
| /* We don't use the DSO route for WIN32 because there is a better way */ |
| ret = GetModuleHandleEx(GET_MODULE_HANDLE_EX_FLAG_FROM_ADDRESS |
| | GET_MODULE_HANDLE_EX_FLAG_PIN, |
| (void *)&base_inited, &handle); |
| |
| return (ret == TRUE) ? 1 : 0; |
| } |
| # else |
| /* |
| * Deliberately leak a reference to ourselves. This will force the library |
| * to remain loaded until the atexit() handler is run a process exit. |
| */ |
| { |
| DSO *dso = NULL; |
| |
| dso = DSO_dsobyaddr(&base_inited, DSO_FLAG_NO_UNLOAD_ON_FREE); |
| DSO_free(dso); |
| } |
| # endif |
| #endif |
| |
| return 1; |
| } |
| |
| static CRYPTO_ONCE load_crypto_strings = CRYPTO_ONCE_STATIC_INIT; |
| static int load_crypto_strings_inited = 0; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_no_load_crypto_strings) |
| { |
| /* Do nothing in this case */ |
| return 1; |
| } |
| |
| DEFINE_RUN_ONCE_STATIC(ossl_init_load_crypto_strings) |
| { |
| int ret = 1; |
| /* |
| * OPENSSL_NO_AUTOERRINIT is provided here to prevent at compile time |
| * pulling in all the error strings during static linking |
| */ |
| #if !defined(OPENSSL_NO_ERR) && !defined(OPENSSL_NO_AUTOERRINIT) |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_load_crypto_strings: " |
| "err_load_crypto_strings_int()\n"); |
| # endif |
| ret = err_load_crypto_strings_int(); |
| load_crypto_strings_inited = 1; |
| #endif |
| return ret; |
| } |
| |
| static CRYPTO_ONCE add_all_ciphers = CRYPTO_ONCE_STATIC_INIT; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_add_all_ciphers) |
| { |
| /* |
| * OPENSSL_NO_AUTOALGINIT is provided here to prevent at compile time |
| * pulling in all the ciphers during static linking |
| */ |
| #ifndef OPENSSL_NO_AUTOALGINIT |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_add_all_ciphers: " |
| "openssl_add_all_ciphers_int()\n"); |
| # endif |
| openssl_add_all_ciphers_int(); |
| #endif |
| return 1; |
| } |
| |
| static CRYPTO_ONCE add_all_digests = CRYPTO_ONCE_STATIC_INIT; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_add_all_digests) |
| { |
| /* |
| * OPENSSL_NO_AUTOALGINIT is provided here to prevent at compile time |
| * pulling in all the ciphers during static linking |
| */ |
| #ifndef OPENSSL_NO_AUTOALGINIT |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_add_all_digests: " |
| "openssl_add_all_digests()\n"); |
| # endif |
| openssl_add_all_digests_int(); |
| #endif |
| return 1; |
| } |
| |
| DEFINE_RUN_ONCE_STATIC(ossl_init_no_add_algs) |
| { |
| /* Do nothing */ |
| return 1; |
| } |
| |
| static CRYPTO_ONCE config = CRYPTO_ONCE_STATIC_INIT; |
| static int config_inited = 0; |
| static const char *appname; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_config) |
| { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, |
| "OPENSSL_INIT: ossl_init_config: openssl_config(%s)\n", |
| appname == NULL ? "NULL" : appname); |
| #endif |
| openssl_config_int(appname); |
| config_inited = 1; |
| return 1; |
| } |
| DEFINE_RUN_ONCE_STATIC(ossl_init_no_config) |
| { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, |
| "OPENSSL_INIT: ossl_init_config: openssl_no_config_int()\n"); |
| #endif |
| openssl_no_config_int(); |
| config_inited = 1; |
| return 1; |
| } |
| |
| static CRYPTO_ONCE async = CRYPTO_ONCE_STATIC_INIT; |
| static int async_inited = 0; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_async) |
| { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_async: async_init()\n"); |
| #endif |
| if (!async_init()) |
| return 0; |
| async_inited = 1; |
| return 1; |
| } |
| |
| #ifndef OPENSSL_NO_ENGINE |
| static CRYPTO_ONCE engine_openssl = CRYPTO_ONCE_STATIC_INIT; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_engine_openssl) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_openssl: " |
| "engine_load_openssl_int()\n"); |
| # endif |
| engine_load_openssl_int(); |
| return 1; |
| } |
| # if !defined(OPENSSL_NO_HW) && \ |
| (defined(__OpenBSD__) || defined(__FreeBSD__) || defined(__DragonFly__) || defined(HAVE_CRYPTODEV)) |
| static CRYPTO_ONCE engine_cryptodev = CRYPTO_ONCE_STATIC_INIT; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_engine_cryptodev) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_cryptodev: " |
| "engine_load_cryptodev_int()\n"); |
| # endif |
| engine_load_cryptodev_int(); |
| return 1; |
| } |
| # endif |
| |
| # ifndef OPENSSL_NO_RDRAND |
| static CRYPTO_ONCE engine_rdrand = CRYPTO_ONCE_STATIC_INIT; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_engine_rdrand) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_rdrand: " |
| "engine_load_rdrand_int()\n"); |
| # endif |
| engine_load_rdrand_int(); |
| return 1; |
| } |
| # endif |
| static CRYPTO_ONCE engine_dynamic = CRYPTO_ONCE_STATIC_INIT; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_engine_dynamic) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_dynamic: " |
| "engine_load_dynamic_int()\n"); |
| # endif |
| engine_load_dynamic_int(); |
| return 1; |
| } |
| # ifndef OPENSSL_NO_STATIC_ENGINE |
| # if !defined(OPENSSL_NO_HW) && !defined(OPENSSL_NO_HW_PADLOCK) |
| static CRYPTO_ONCE engine_padlock = CRYPTO_ONCE_STATIC_INIT; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_engine_padlock) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_padlock: " |
| "engine_load_padlock_int()\n"); |
| # endif |
| engine_load_padlock_int(); |
| return 1; |
| } |
| # endif |
| # if defined(OPENSSL_SYS_WIN32) && !defined(OPENSSL_NO_CAPIENG) |
| static CRYPTO_ONCE engine_capi = CRYPTO_ONCE_STATIC_INIT; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_engine_capi) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_capi: " |
| "engine_load_capi_int()\n"); |
| # endif |
| engine_load_capi_int(); |
| return 1; |
| } |
| # endif |
| # if !defined(OPENSSL_NO_AFALGENG) |
| static CRYPTO_ONCE engine_afalg = CRYPTO_ONCE_STATIC_INIT; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_engine_afalg) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_afalg: " |
| "engine_load_afalg_int()\n"); |
| # endif |
| engine_load_afalg_int(); |
| return 1; |
| } |
| # endif |
| # endif |
| #endif |
| |
| #ifndef OPENSSL_NO_COMP |
| static CRYPTO_ONCE zlib = CRYPTO_ONCE_STATIC_INIT; |
| |
| static int zlib_inited = 0; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_zlib) |
| { |
| /* Do nothing - we need to know about this for the later cleanup */ |
| zlib_inited = 1; |
| return 1; |
| } |
| #endif |
| |
| static void ossl_init_thread_stop(struct thread_local_inits_st *locals) |
| { |
| /* Can't do much about this */ |
| if (locals == NULL) |
| return; |
| |
| if (locals->async) { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_thread_stop: " |
| "ASYNC_cleanup_thread()\n"); |
| #endif |
| ASYNC_cleanup_thread(); |
| } |
| |
| if (locals->err_state) { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_thread_stop: " |
| "err_delete_thread_state()\n"); |
| #endif |
| err_delete_thread_state(); |
| } |
| |
| OPENSSL_free(locals); |
| } |
| |
| void OPENSSL_thread_stop(void) |
| { |
| ossl_init_thread_stop( |
| (struct thread_local_inits_st *)ossl_init_get_thread_local(0)); |
| } |
| |
| int ossl_init_thread_start(uint64_t opts) |
| { |
| struct thread_local_inits_st *locals = ossl_init_get_thread_local(1); |
| |
| if (locals == NULL) |
| return 0; |
| |
| if (opts & OPENSSL_INIT_THREAD_ASYNC) { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_thread_start: " |
| "marking thread for async\n"); |
| #endif |
| locals->async = 1; |
| } |
| |
| if (opts & OPENSSL_INIT_THREAD_ERR_STATE) { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_thread_start: " |
| "marking thread for err_state\n"); |
| #endif |
| locals->err_state = 1; |
| } |
| |
| return 1; |
| } |
| |
| void OPENSSL_cleanup(void) |
| { |
| OPENSSL_INIT_STOP *currhandler, *lasthandler; |
| |
| /* If we've not been inited then no need to deinit */ |
| if (!base_inited) |
| return; |
| |
| /* Might be explicitly called and also by atexit */ |
| if (stopped) |
| return; |
| stopped = 1; |
| |
| /* |
| * Thread stop may not get automatically called by the thread library for |
| * the very last thread in some situations, so call it directly. |
| */ |
| ossl_init_thread_stop(ossl_init_get_thread_local(0)); |
| |
| currhandler = stop_handlers; |
| while (currhandler != NULL) { |
| currhandler->handler(); |
| lasthandler = currhandler; |
| currhandler = currhandler->next; |
| OPENSSL_free(lasthandler); |
| } |
| stop_handlers = NULL; |
| |
| CRYPTO_THREAD_lock_free(init_lock); |
| |
| /* |
| * We assume we are single-threaded for this function, i.e. no race |
| * conditions for the various "*_inited" vars below. |
| */ |
| |
| #ifndef OPENSSL_NO_COMP |
| if (zlib_inited) { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "comp_zlib_cleanup_int()\n"); |
| #endif |
| comp_zlib_cleanup_int(); |
| } |
| #endif |
| |
| if (async_inited) { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "async_deinit()\n"); |
| # endif |
| async_deinit(); |
| } |
| |
| if (load_crypto_strings_inited) { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "err_free_strings_int()\n"); |
| #endif |
| err_free_strings_int(); |
| } |
| |
| CRYPTO_THREAD_cleanup_local(&threadstopkey); |
| |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "rand_cleanup_int()\n"); |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "conf_modules_free_int()\n"); |
| #ifndef OPENSSL_NO_ENGINE |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "engine_cleanup_int()\n"); |
| #endif |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "crypto_cleanup_all_ex_data_int()\n"); |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "bio_sock_cleanup_int()\n"); |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "bio_cleanup()\n"); |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "evp_cleanup_int()\n"); |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "obj_cleanup_int()\n"); |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "err_cleanup()\n"); |
| #endif |
| /* |
| * Note that cleanup order is important: |
| * - rand_cleanup_int could call an ENGINE's RAND cleanup function so |
| * must be called before engine_cleanup_int() |
| * - ENGINEs use CRYPTO_EX_DATA and therefore, must be cleaned up |
| * before the ex data handlers are wiped in CRYPTO_cleanup_all_ex_data(). |
| * - conf_modules_free_int() can end up in ENGINE code so must be called |
| * before engine_cleanup_int() |
| * - ENGINEs and additional EVP algorithms might use added OIDs names so |
| * obj_cleanup_int() must be called last |
| */ |
| rand_cleanup_int(); |
| conf_modules_free_int(); |
| #ifndef OPENSSL_NO_ENGINE |
| engine_cleanup_int(); |
| #endif |
| crypto_cleanup_all_ex_data_int(); |
| bio_cleanup(); |
| evp_cleanup_int(); |
| obj_cleanup_int(); |
| err_cleanup(); |
| |
| base_inited = 0; |
| } |
| |
| /* |
| * If this function is called with a non NULL settings value then it must be |
| * called prior to any threads making calls to any OpenSSL functions, |
| * i.e. passing a non-null settings value is assumed to be single-threaded. |
| */ |
| int OPENSSL_init_crypto(uint64_t opts, const OPENSSL_INIT_SETTINGS *settings) |
| { |
| static int stoperrset = 0; |
| |
| if (stopped) { |
| if (!stoperrset) { |
| /* |
| * We only ever set this once to avoid getting into an infinite |
| * loop where the error system keeps trying to init and fails so |
| * sets an error etc |
| */ |
| stoperrset = 1; |
| CRYPTOerr(CRYPTO_F_OPENSSL_INIT_CRYPTO, ERR_R_INIT_FAIL); |
| } |
| return 0; |
| } |
| |
| if (!base_inited && !RUN_ONCE(&base, ossl_init_base)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_NO_LOAD_CRYPTO_STRINGS) |
| && !RUN_ONCE(&load_crypto_strings, |
| ossl_init_no_load_crypto_strings)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_LOAD_CRYPTO_STRINGS) |
| && !RUN_ONCE(&load_crypto_strings, ossl_init_load_crypto_strings)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_NO_ADD_ALL_CIPHERS) |
| && !RUN_ONCE(&add_all_ciphers, ossl_init_no_add_algs)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_ADD_ALL_CIPHERS) |
| && !RUN_ONCE(&add_all_ciphers, ossl_init_add_all_ciphers)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_NO_ADD_ALL_DIGESTS) |
| && !RUN_ONCE(&add_all_digests, ossl_init_no_add_algs)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_ADD_ALL_DIGESTS) |
| && !RUN_ONCE(&add_all_digests, ossl_init_add_all_digests)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_NO_LOAD_CONFIG) |
| && !RUN_ONCE(&config, ossl_init_no_config)) |
| return 0; |
| |
| if (opts & OPENSSL_INIT_LOAD_CONFIG) { |
| int ret; |
| CRYPTO_THREAD_write_lock(init_lock); |
| appname = (settings == NULL) ? NULL : settings->appname; |
| ret = RUN_ONCE(&config, ossl_init_config); |
| CRYPTO_THREAD_unlock(init_lock); |
| if (!ret) |
| return 0; |
| } |
| |
| if ((opts & OPENSSL_INIT_ASYNC) |
| && !RUN_ONCE(&async, ossl_init_async)) |
| return 0; |
| |
| #ifndef OPENSSL_NO_ENGINE |
| if ((opts & OPENSSL_INIT_ENGINE_OPENSSL) |
| && !RUN_ONCE(&engine_openssl, ossl_init_engine_openssl)) |
| return 0; |
| # if !defined(OPENSSL_NO_HW) && \ |
| (defined(__OpenBSD__) || defined(__FreeBSD__) || defined(__DragonFly__) || defined(HAVE_CRYPTODEV)) |
| if ((opts & OPENSSL_INIT_ENGINE_CRYPTODEV) |
| && !RUN_ONCE(&engine_cryptodev, ossl_init_engine_cryptodev)) |
| return 0; |
| # endif |
| # ifndef OPENSSL_NO_RDRAND |
| if ((opts & OPENSSL_INIT_ENGINE_RDRAND) |
| && !RUN_ONCE(&engine_rdrand, ossl_init_engine_rdrand)) |
| return 0; |
| # endif |
| if ((opts & OPENSSL_INIT_ENGINE_DYNAMIC) |
| && !RUN_ONCE(&engine_dynamic, ossl_init_engine_dynamic)) |
| return 0; |
| # ifndef OPENSSL_NO_STATIC_ENGINE |
| # if !defined(OPENSSL_NO_HW) && !defined(OPENSSL_NO_HW_PADLOCK) |
| if ((opts & OPENSSL_INIT_ENGINE_PADLOCK) |
| && !RUN_ONCE(&engine_padlock, ossl_init_engine_padlock)) |
| return 0; |
| # endif |
| # if defined(OPENSSL_SYS_WIN32) && !defined(OPENSSL_NO_CAPIENG) |
| if ((opts & OPENSSL_INIT_ENGINE_CAPI) |
| && !RUN_ONCE(&engine_capi, ossl_init_engine_capi)) |
| return 0; |
| # endif |
| # if !defined(OPENSSL_NO_AFALGENG) |
| if ((opts & OPENSSL_INIT_ENGINE_AFALG) |
| && !RUN_ONCE(&engine_afalg, ossl_init_engine_afalg)) |
| return 0; |
| # endif |
| # endif |
| if (opts & (OPENSSL_INIT_ENGINE_ALL_BUILTIN |
| | OPENSSL_INIT_ENGINE_OPENSSL |
| | OPENSSL_INIT_ENGINE_AFALG)) { |
| ENGINE_register_all_complete(); |
| } |
| #endif |
| |
| #ifndef OPENSSL_NO_COMP |
| if ((opts & OPENSSL_INIT_ZLIB) |
| && !RUN_ONCE(&zlib, ossl_init_zlib)) |
| return 0; |
| #endif |
| |
| return 1; |
| } |
| |
| int OPENSSL_atexit(void (*handler)(void)) |
| { |
| OPENSSL_INIT_STOP *newhand; |
| |
| #if !defined(OPENSSL_NO_DSO) && !defined(OPENSSL_USE_NODELETE) |
| { |
| union { |
| void *sym; |
| void (*func)(void); |
| } handlersym; |
| |
| handlersym.func = handler; |
| # ifdef DSO_WIN32 |
| { |
| HMODULE handle = NULL; |
| BOOL ret; |
| |
| /* |
| * We don't use the DSO route for WIN32 because there is a better |
| * way |
| */ |
| ret = GetModuleHandleEx(GET_MODULE_HANDLE_EX_FLAG_FROM_ADDRESS |
| | GET_MODULE_HANDLE_EX_FLAG_PIN, |
| handlersym.sym, &handle); |
| |
| if (!ret) |
| return 0; |
| } |
| # else |
| /* |
| * Deliberately leak a reference to the handler. This will force the |
| * library/code containing the handler to remain loaded until we run the |
| * atexit handler. If -znodelete has been used then this is |
| * unneccessary. |
| */ |
| { |
| DSO *dso = NULL; |
| |
| dso = DSO_dsobyaddr(handlersym.sym, DSO_FLAG_NO_UNLOAD_ON_FREE); |
| DSO_free(dso); |
| } |
| # endif |
| } |
| #endif |
| |
| newhand = OPENSSL_malloc(sizeof(*newhand)); |
| if (newhand == NULL) |
| return 0; |
| |
| newhand->handler = handler; |
| newhand->next = stop_handlers; |
| stop_handlers = newhand; |
| |
| return 1; |
| } |