| /* ssl/d1_both.c */ |
| /* |
| * DTLS implementation written by Nagendra Modadugu |
| * (nagendra@cs.stanford.edu) for the OpenSSL project 2005. |
| */ |
| /* ==================================================================== |
| * Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. All advertising materials mentioning features or use of this |
| * software must display the following acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" |
| * |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For written permission, please contact |
| * openssl-core@openssl.org. |
| * |
| * 5. Products derived from this software may not be called "OpenSSL" |
| * nor may "OpenSSL" appear in their names without prior written |
| * permission of the OpenSSL Project. |
| * |
| * 6. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This product includes cryptographic software written by Eric Young |
| * (eay@cryptsoft.com). This product includes software written by Tim |
| * Hudson (tjh@cryptsoft.com). |
| * |
| */ |
| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] |
| */ |
| |
| #include <limits.h> |
| #include <string.h> |
| #include <stdio.h> |
| #include "ssl_locl.h" |
| #include <openssl/buffer.h> |
| #include <openssl/rand.h> |
| #include <openssl/objects.h> |
| #include <openssl/evp.h> |
| #include <openssl/x509.h> |
| |
| #define RSMBLY_BITMASK_SIZE(msg_len) (((msg_len) + 7) / 8) |
| |
| #define RSMBLY_BITMASK_MARK(bitmask, start, end) { \ |
| if ((end) - (start) <= 8) { \ |
| long ii; \ |
| for (ii = (start); ii < (end); ii++) bitmask[((ii) >> 3)] |= (1 << ((ii) & 7)); \ |
| } else { \ |
| long ii; \ |
| bitmask[((start) >> 3)] |= bitmask_start_values[((start) & 7)]; \ |
| for (ii = (((start) >> 3) + 1); ii < ((((end) - 1)) >> 3); ii++) bitmask[ii] = 0xff; \ |
| bitmask[(((end) - 1) >> 3)] |= bitmask_end_values[((end) & 7)]; \ |
| } } |
| |
| #define RSMBLY_BITMASK_IS_COMPLETE(bitmask, msg_len, is_complete) { \ |
| long ii; \ |
| OPENSSL_assert((msg_len) > 0); \ |
| is_complete = 1; \ |
| if (bitmask[(((msg_len) - 1) >> 3)] != bitmask_end_values[((msg_len) & 7)]) is_complete = 0; \ |
| if (is_complete) for (ii = (((msg_len) - 1) >> 3) - 1; ii >= 0 ; ii--) \ |
| if (bitmask[ii] != 0xff) { is_complete = 0; break; } } |
| |
| static unsigned char bitmask_start_values[] = |
| { 0xff, 0xfe, 0xfc, 0xf8, 0xf0, 0xe0, 0xc0, 0x80 }; |
| static unsigned char bitmask_end_values[] = |
| { 0xff, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f }; |
| |
| /* XDTLS: figure out the right values */ |
| static const unsigned int g_probable_mtu[] = { 1500, 512, 256 }; |
| |
| static void dtls1_fix_message_header(SSL *s, unsigned long frag_off, |
| unsigned long frag_len); |
| static unsigned char *dtls1_write_message_header(SSL *s, unsigned char *p); |
| static void dtls1_set_message_header_int(SSL *s, unsigned char mt, |
| unsigned long len, |
| unsigned short seq_num, |
| unsigned long frag_off, |
| unsigned long frag_len); |
| static long dtls1_get_message_fragment(SSL *s, int st1, int stn, int mt, |
| long max, int *ok); |
| |
| static hm_fragment *dtls1_hm_fragment_new(unsigned long frag_len, |
| int reassembly) |
| { |
| hm_fragment *frag = NULL; |
| unsigned char *buf = NULL; |
| unsigned char *bitmask = NULL; |
| |
| frag = OPENSSL_malloc(sizeof(*frag)); |
| if (frag == NULL) |
| return NULL; |
| |
| if (frag_len) { |
| buf = OPENSSL_malloc(frag_len); |
| if (buf == NULL) { |
| OPENSSL_free(frag); |
| return NULL; |
| } |
| } |
| |
| /* zero length fragment gets zero frag->fragment */ |
| frag->fragment = buf; |
| |
| /* Initialize reassembly bitmask if necessary */ |
| if (reassembly) { |
| bitmask = OPENSSL_zalloc(RSMBLY_BITMASK_SIZE(frag_len)); |
| if (bitmask == NULL) { |
| OPENSSL_free(buf); |
| OPENSSL_free(frag); |
| return NULL; |
| } |
| } |
| |
| frag->reassembly = bitmask; |
| |
| return frag; |
| } |
| |
| void dtls1_hm_fragment_free(hm_fragment *frag) |
| { |
| if (!frag) |
| return; |
| if (frag->msg_header.is_ccs) { |
| EVP_CIPHER_CTX_free(frag->msg_header. |
| saved_retransmit_state.enc_write_ctx); |
| EVP_MD_CTX_destroy(frag->msg_header. |
| saved_retransmit_state.write_hash); |
| } |
| OPENSSL_free(frag->fragment); |
| OPENSSL_free(frag->reassembly); |
| OPENSSL_free(frag); |
| } |
| |
| static int dtls1_query_mtu(SSL *s) |
| { |
| if (s->d1->link_mtu) { |
| s->d1->mtu = |
| s->d1->link_mtu - BIO_dgram_get_mtu_overhead(SSL_get_wbio(s)); |
| s->d1->link_mtu = 0; |
| } |
| |
| /* AHA! Figure out the MTU, and stick to the right size */ |
| if (s->d1->mtu < dtls1_min_mtu(s)) { |
| if (!(SSL_get_options(s) & SSL_OP_NO_QUERY_MTU)) { |
| s->d1->mtu = |
| BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_QUERY_MTU, 0, NULL); |
| |
| /* |
| * I've seen the kernel return bogus numbers when it doesn't know |
| * (initial write), so just make sure we have a reasonable number |
| */ |
| if (s->d1->mtu < dtls1_min_mtu(s)) { |
| /* Set to min mtu */ |
| s->d1->mtu = dtls1_min_mtu(s); |
| BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SET_MTU, |
| s->d1->mtu, NULL); |
| } |
| } else |
| return 0; |
| } |
| return 1; |
| } |
| |
| /* |
| * send s->init_buf in records of type 'type' (SSL3_RT_HANDSHAKE or |
| * SSL3_RT_CHANGE_CIPHER_SPEC) |
| */ |
| int dtls1_do_write(SSL *s, int type) |
| { |
| int ret; |
| unsigned int curr_mtu; |
| int retry = 1; |
| unsigned int len, frag_off, mac_size, blocksize, used_len; |
| |
| if (!dtls1_query_mtu(s)) |
| return -1; |
| |
| OPENSSL_assert(s->d1->mtu >= dtls1_min_mtu(s)); /* should have something |
| * reasonable now */ |
| |
| if (s->init_off == 0 && type == SSL3_RT_HANDSHAKE) |
| OPENSSL_assert(s->init_num == |
| (int)s->d1->w_msg_hdr.msg_len + |
| DTLS1_HM_HEADER_LENGTH); |
| |
| if (s->write_hash) { |
| if (s->enc_write_ctx |
| && ((EVP_CIPHER_CTX_mode(s->enc_write_ctx) == EVP_CIPH_GCM_MODE) || |
| (EVP_CIPHER_CTX_mode(s->enc_write_ctx) == EVP_CIPH_CCM_MODE))) |
| mac_size = 0; |
| else |
| mac_size = EVP_MD_CTX_size(s->write_hash); |
| } else |
| mac_size = 0; |
| |
| if (s->enc_write_ctx && |
| (EVP_CIPHER_CTX_mode(s->enc_write_ctx) == EVP_CIPH_CBC_MODE)) |
| blocksize = 2 * EVP_CIPHER_block_size(s->enc_write_ctx->cipher); |
| else |
| blocksize = 0; |
| |
| frag_off = 0; |
| /* s->init_num shouldn't ever be < 0...but just in case */ |
| while (s->init_num > 0) { |
| used_len = BIO_wpending(SSL_get_wbio(s)) + DTLS1_RT_HEADER_LENGTH |
| + mac_size + blocksize; |
| if (s->d1->mtu > used_len) |
| curr_mtu = s->d1->mtu - used_len; |
| else |
| curr_mtu = 0; |
| |
| if (curr_mtu <= DTLS1_HM_HEADER_LENGTH) { |
| /* |
| * grr.. we could get an error if MTU picked was wrong |
| */ |
| ret = BIO_flush(SSL_get_wbio(s)); |
| if (ret <= 0) |
| return ret; |
| used_len = DTLS1_RT_HEADER_LENGTH + mac_size + blocksize; |
| if (s->d1->mtu > used_len + DTLS1_HM_HEADER_LENGTH) { |
| curr_mtu = s->d1->mtu - used_len; |
| } else { |
| /* Shouldn't happen */ |
| return -1; |
| } |
| } |
| |
| /* |
| * We just checked that s->init_num > 0 so this cast should be safe |
| */ |
| if (((unsigned int)s->init_num) > curr_mtu) |
| len = curr_mtu; |
| else |
| len = s->init_num; |
| |
| /* Shouldn't ever happen */ |
| if (len > INT_MAX) |
| len = INT_MAX; |
| |
| /* |
| * XDTLS: this function is too long. split out the CCS part |
| */ |
| if (type == SSL3_RT_HANDSHAKE) { |
| if (s->init_off != 0) { |
| OPENSSL_assert(s->init_off > DTLS1_HM_HEADER_LENGTH); |
| s->init_off -= DTLS1_HM_HEADER_LENGTH; |
| s->init_num += DTLS1_HM_HEADER_LENGTH; |
| |
| /* |
| * We just checked that s->init_num > 0 so this cast should |
| * be safe |
| */ |
| if (((unsigned int)s->init_num) > curr_mtu) |
| len = curr_mtu; |
| else |
| len = s->init_num; |
| } |
| |
| /* Shouldn't ever happen */ |
| if (len > INT_MAX) |
| len = INT_MAX; |
| |
| if (len < DTLS1_HM_HEADER_LENGTH) { |
| /* |
| * len is so small that we really can't do anything sensible |
| * so fail |
| */ |
| return -1; |
| } |
| dtls1_fix_message_header(s, frag_off, |
| len - DTLS1_HM_HEADER_LENGTH); |
| |
| dtls1_write_message_header(s, |
| (unsigned char *)&s->init_buf-> |
| data[s->init_off]); |
| } |
| |
| ret = dtls1_write_bytes(s, type, &s->init_buf->data[s->init_off], |
| len); |
| if (ret < 0) { |
| /* |
| * might need to update MTU here, but we don't know which |
| * previous packet caused the failure -- so can't really |
| * retransmit anything. continue as if everything is fine and |
| * wait for an alert to handle the retransmit |
| */ |
| if (retry && BIO_ctrl(SSL_get_wbio(s), |
| BIO_CTRL_DGRAM_MTU_EXCEEDED, 0, NULL) > 0) { |
| if (!(SSL_get_options(s) & SSL_OP_NO_QUERY_MTU)) { |
| if (!dtls1_query_mtu(s)) |
| return -1; |
| /* Have one more go */ |
| retry = 0; |
| } else |
| return -1; |
| } else { |
| return (-1); |
| } |
| } else { |
| |
| /* |
| * bad if this assert fails, only part of the handshake message |
| * got sent. but why would this happen? |
| */ |
| OPENSSL_assert(len == (unsigned int)ret); |
| |
| if (type == SSL3_RT_HANDSHAKE && !s->d1->retransmitting) { |
| /* |
| * should not be done for 'Hello Request's, but in that case |
| * we'll ignore the result anyway |
| */ |
| unsigned char *p = |
| (unsigned char *)&s->init_buf->data[s->init_off]; |
| const struct hm_header_st *msg_hdr = &s->d1->w_msg_hdr; |
| int xlen; |
| |
| if (frag_off == 0 && s->version != DTLS1_BAD_VER) { |
| /* |
| * reconstruct message header is if it is being sent in |
| * single fragment |
| */ |
| *p++ = msg_hdr->type; |
| l2n3(msg_hdr->msg_len, p); |
| s2n(msg_hdr->seq, p); |
| l2n3(0, p); |
| l2n3(msg_hdr->msg_len, p); |
| p -= DTLS1_HM_HEADER_LENGTH; |
| xlen = ret; |
| } else { |
| p += DTLS1_HM_HEADER_LENGTH; |
| xlen = ret - DTLS1_HM_HEADER_LENGTH; |
| } |
| |
| ssl3_finish_mac(s, p, xlen); |
| } |
| |
| if (ret == s->init_num) { |
| if (s->msg_callback) |
| s->msg_callback(1, s->version, type, s->init_buf->data, |
| (size_t)(s->init_off + s->init_num), s, |
| s->msg_callback_arg); |
| |
| s->init_off = 0; /* done writing this message */ |
| s->init_num = 0; |
| |
| return (1); |
| } |
| s->init_off += ret; |
| s->init_num -= ret; |
| frag_off += (ret -= DTLS1_HM_HEADER_LENGTH); |
| } |
| } |
| return (0); |
| } |
| |
| /* |
| * Obtain handshake message of message type 'mt' (any if mt == -1), maximum |
| * acceptable body length 'max'. Read an entire handshake message. Handshake |
| * messages arrive in fragments. |
| */ |
| long dtls1_get_message(SSL *s, int st1, int stn, int mt, long max, int *ok) |
| { |
| int i, al; |
| struct hm_header_st *msg_hdr; |
| unsigned char *p; |
| unsigned long msg_len; |
| |
| /* |
| * s3->tmp is used to store messages that are unexpected, caused by the |
| * absence of an optional handshake message |
| */ |
| if (s->s3->tmp.reuse_message) { |
| if ((mt >= 0) && (s->s3->tmp.message_type != mt)) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| SSLerr(SSL_F_DTLS1_GET_MESSAGE, SSL_R_UNEXPECTED_MESSAGE); |
| goto f_err; |
| } |
| *ok = 1; |
| |
| |
| /* |
| * Messages reused from dtls1_listen also have the record header in |
| * the buffer which we need to skip over. |
| */ |
| if (s->s3->tmp.reuse_message == DTLS1_SKIP_RECORD_HEADER) { |
| s->init_msg = s->init_buf->data + DTLS1_HM_HEADER_LENGTH |
| + DTLS1_RT_HEADER_LENGTH; |
| } else { |
| s->init_msg = s->init_buf->data + DTLS1_HM_HEADER_LENGTH; |
| } |
| s->init_num = (int)s->s3->tmp.message_size; |
| s->s3->tmp.reuse_message = 0; |
| return s->init_num; |
| } |
| |
| msg_hdr = &s->d1->r_msg_hdr; |
| memset(msg_hdr, 0, sizeof(*msg_hdr)); |
| |
| again: |
| i = dtls1_get_message_fragment(s, st1, stn, mt, max, ok); |
| if (i == DTLS1_HM_BAD_FRAGMENT || i == DTLS1_HM_FRAGMENT_RETRY) { |
| /* bad fragment received */ |
| goto again; |
| } else if (i <= 0 && !*ok) { |
| return i; |
| } |
| |
| if (mt >= 0 && s->s3->tmp.message_type != mt) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| SSLerr(SSL_F_DTLS1_GET_MESSAGE, SSL_R_UNEXPECTED_MESSAGE); |
| goto f_err; |
| } |
| |
| p = (unsigned char *)s->init_buf->data; |
| |
| if (mt == SSL3_MT_CHANGE_CIPHER_SPEC) { |
| if (s->msg_callback) { |
| s->msg_callback(0, s->version, SSL3_RT_CHANGE_CIPHER_SPEC, |
| p, 1, s, s->msg_callback_arg); |
| } |
| /* |
| * This isn't a real handshake message so skip the processing below. |
| * dtls1_get_message_fragment() will never return a CCS if mt == -1, |
| * so we are ok to continue in that case. |
| */ |
| return i; |
| } |
| |
| msg_len = msg_hdr->msg_len; |
| |
| /* reconstruct message header */ |
| *(p++) = msg_hdr->type; |
| l2n3(msg_len, p); |
| s2n(msg_hdr->seq, p); |
| l2n3(0, p); |
| l2n3(msg_len, p); |
| if (s->version != DTLS1_BAD_VER) { |
| p -= DTLS1_HM_HEADER_LENGTH; |
| msg_len += DTLS1_HM_HEADER_LENGTH; |
| } |
| |
| ssl3_finish_mac(s, p, msg_len); |
| if (s->msg_callback) |
| s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE, |
| p, msg_len, s, s->msg_callback_arg); |
| |
| memset(msg_hdr, 0, sizeof(*msg_hdr)); |
| |
| s->d1->handshake_read_seq++; |
| |
| |
| s->init_msg = s->init_buf->data + DTLS1_HM_HEADER_LENGTH; |
| return s->init_num; |
| |
| f_err: |
| ssl3_send_alert(s, SSL3_AL_FATAL, al); |
| *ok = 0; |
| return -1; |
| } |
| |
| static int dtls1_preprocess_fragment(SSL *s, struct hm_header_st *msg_hdr, |
| int max) |
| { |
| size_t frag_off, frag_len, msg_len; |
| |
| msg_len = msg_hdr->msg_len; |
| frag_off = msg_hdr->frag_off; |
| frag_len = msg_hdr->frag_len; |
| |
| /* sanity checking */ |
| if ((frag_off + frag_len) > msg_len) { |
| SSLerr(SSL_F_DTLS1_PREPROCESS_FRAGMENT, SSL_R_EXCESSIVE_MESSAGE_SIZE); |
| return SSL_AD_ILLEGAL_PARAMETER; |
| } |
| |
| if ((frag_off + frag_len) > (unsigned long)max) { |
| SSLerr(SSL_F_DTLS1_PREPROCESS_FRAGMENT, SSL_R_EXCESSIVE_MESSAGE_SIZE); |
| return SSL_AD_ILLEGAL_PARAMETER; |
| } |
| |
| if (s->d1->r_msg_hdr.frag_off == 0) { /* first fragment */ |
| /* |
| * msg_len is limited to 2^24, but is effectively checked against max |
| * above |
| */ |
| if (!BUF_MEM_grow_clean |
| (s->init_buf, msg_len + DTLS1_HM_HEADER_LENGTH)) { |
| SSLerr(SSL_F_DTLS1_PREPROCESS_FRAGMENT, ERR_R_BUF_LIB); |
| return SSL_AD_INTERNAL_ERROR; |
| } |
| |
| s->s3->tmp.message_size = msg_len; |
| s->d1->r_msg_hdr.msg_len = msg_len; |
| s->s3->tmp.message_type = msg_hdr->type; |
| s->d1->r_msg_hdr.type = msg_hdr->type; |
| s->d1->r_msg_hdr.seq = msg_hdr->seq; |
| } else if (msg_len != s->d1->r_msg_hdr.msg_len) { |
| /* |
| * They must be playing with us! BTW, failure to enforce upper limit |
| * would open possibility for buffer overrun. |
| */ |
| SSLerr(SSL_F_DTLS1_PREPROCESS_FRAGMENT, SSL_R_EXCESSIVE_MESSAGE_SIZE); |
| return SSL_AD_ILLEGAL_PARAMETER; |
| } |
| |
| return 0; /* no error */ |
| } |
| |
| static int dtls1_retrieve_buffered_fragment(SSL *s, long max, int *ok) |
| { |
| /*- |
| * (0) check whether the desired fragment is available |
| * if so: |
| * (1) copy over the fragment to s->init_buf->data[] |
| * (2) update s->init_num |
| */ |
| pitem *item; |
| hm_fragment *frag; |
| int al; |
| |
| *ok = 0; |
| item = pqueue_peek(s->d1->buffered_messages); |
| if (item == NULL) |
| return 0; |
| |
| frag = (hm_fragment *)item->data; |
| |
| /* Don't return if reassembly still in progress */ |
| if (frag->reassembly != NULL) |
| return 0; |
| |
| if (s->d1->handshake_read_seq == frag->msg_header.seq) { |
| unsigned long frag_len = frag->msg_header.frag_len; |
| pqueue_pop(s->d1->buffered_messages); |
| |
| al = dtls1_preprocess_fragment(s, &frag->msg_header, max); |
| |
| if (al == 0) { /* no alert */ |
| unsigned char *p = |
| (unsigned char *)s->init_buf->data + DTLS1_HM_HEADER_LENGTH; |
| memcpy(&p[frag->msg_header.frag_off], frag->fragment, |
| frag->msg_header.frag_len); |
| } |
| |
| dtls1_hm_fragment_free(frag); |
| pitem_free(item); |
| |
| if (al == 0) { |
| *ok = 1; |
| return frag_len; |
| } |
| |
| ssl3_send_alert(s, SSL3_AL_FATAL, al); |
| s->init_num = 0; |
| *ok = 0; |
| return -1; |
| } else |
| return 0; |
| } |
| |
| /* |
| * dtls1_max_handshake_message_len returns the maximum number of bytes |
| * permitted in a DTLS handshake message for |s|. The minimum is 16KB, but |
| * may be greater if the maximum certificate list size requires it. |
| */ |
| static unsigned long dtls1_max_handshake_message_len(const SSL *s) |
| { |
| unsigned long max_len = |
| DTLS1_HM_HEADER_LENGTH + SSL3_RT_MAX_ENCRYPTED_LENGTH; |
| if (max_len < (unsigned long)s->max_cert_list) |
| return s->max_cert_list; |
| return max_len; |
| } |
| |
| static int |
| dtls1_reassemble_fragment(SSL *s, const struct hm_header_st *msg_hdr, int *ok) |
| { |
| hm_fragment *frag = NULL; |
| pitem *item = NULL; |
| int i = -1, is_complete; |
| unsigned char seq64be[8]; |
| unsigned long frag_len = msg_hdr->frag_len; |
| |
| if ((msg_hdr->frag_off + frag_len) > msg_hdr->msg_len || |
| msg_hdr->msg_len > dtls1_max_handshake_message_len(s)) |
| goto err; |
| |
| if (frag_len == 0) |
| return DTLS1_HM_FRAGMENT_RETRY; |
| |
| /* Try to find item in queue */ |
| memset(seq64be, 0, sizeof(seq64be)); |
| seq64be[6] = (unsigned char)(msg_hdr->seq >> 8); |
| seq64be[7] = (unsigned char)msg_hdr->seq; |
| item = pqueue_find(s->d1->buffered_messages, seq64be); |
| |
| if (item == NULL) { |
| frag = dtls1_hm_fragment_new(msg_hdr->msg_len, 1); |
| if (frag == NULL) |
| goto err; |
| memcpy(&(frag->msg_header), msg_hdr, sizeof(*msg_hdr)); |
| frag->msg_header.frag_len = frag->msg_header.msg_len; |
| frag->msg_header.frag_off = 0; |
| } else { |
| frag = (hm_fragment *)item->data; |
| if (frag->msg_header.msg_len != msg_hdr->msg_len) { |
| item = NULL; |
| frag = NULL; |
| goto err; |
| } |
| } |
| |
| /* |
| * If message is already reassembled, this must be a retransmit and can |
| * be dropped. In this case item != NULL and so frag does not need to be |
| * freed. |
| */ |
| if (frag->reassembly == NULL) { |
| unsigned char devnull[256]; |
| |
| while (frag_len) { |
| i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, NULL, |
| devnull, |
| frag_len > |
| sizeof(devnull) ? sizeof(devnull) : |
| frag_len, 0); |
| if (i <= 0) |
| goto err; |
| frag_len -= i; |
| } |
| return DTLS1_HM_FRAGMENT_RETRY; |
| } |
| |
| /* read the body of the fragment (header has already been read */ |
| i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, NULL, |
| frag->fragment + msg_hdr->frag_off, |
| frag_len, 0); |
| if ((unsigned long)i != frag_len) |
| i = -1; |
| if (i <= 0) |
| goto err; |
| |
| RSMBLY_BITMASK_MARK(frag->reassembly, (long)msg_hdr->frag_off, |
| (long)(msg_hdr->frag_off + frag_len)); |
| |
| RSMBLY_BITMASK_IS_COMPLETE(frag->reassembly, (long)msg_hdr->msg_len, |
| is_complete); |
| |
| if (is_complete) { |
| OPENSSL_free(frag->reassembly); |
| frag->reassembly = NULL; |
| } |
| |
| if (item == NULL) { |
| item = pitem_new(seq64be, frag); |
| if (item == NULL) { |
| i = -1; |
| goto err; |
| } |
| |
| item = pqueue_insert(s->d1->buffered_messages, item); |
| /* |
| * pqueue_insert fails iff a duplicate item is inserted. However, |
| * |item| cannot be a duplicate. If it were, |pqueue_find|, above, |
| * would have returned it and control would never have reached this |
| * branch. |
| */ |
| OPENSSL_assert(item != NULL); |
| } |
| |
| return DTLS1_HM_FRAGMENT_RETRY; |
| |
| err: |
| if (item == NULL) |
| dtls1_hm_fragment_free(frag); |
| *ok = 0; |
| return i; |
| } |
| |
| static int |
| dtls1_process_out_of_seq_message(SSL *s, const struct hm_header_st *msg_hdr, |
| int *ok) |
| { |
| int i = -1; |
| hm_fragment *frag = NULL; |
| pitem *item = NULL; |
| unsigned char seq64be[8]; |
| unsigned long frag_len = msg_hdr->frag_len; |
| |
| if ((msg_hdr->frag_off + frag_len) > msg_hdr->msg_len) |
| goto err; |
| |
| /* Try to find item in queue, to prevent duplicate entries */ |
| memset(seq64be, 0, sizeof(seq64be)); |
| seq64be[6] = (unsigned char)(msg_hdr->seq >> 8); |
| seq64be[7] = (unsigned char)msg_hdr->seq; |
| item = pqueue_find(s->d1->buffered_messages, seq64be); |
| |
| /* |
| * If we already have an entry and this one is a fragment, don't discard |
| * it and rather try to reassemble it. |
| */ |
| if (item != NULL && frag_len != msg_hdr->msg_len) |
| item = NULL; |
| |
| /* |
| * Discard the message if sequence number was already there, is too far |
| * in the future, already in the queue or if we received a FINISHED |
| * before the SERVER_HELLO, which then must be a stale retransmit. |
| */ |
| if (msg_hdr->seq <= s->d1->handshake_read_seq || |
| msg_hdr->seq > s->d1->handshake_read_seq + 10 || item != NULL || |
| (s->d1->handshake_read_seq == 0 && msg_hdr->type == SSL3_MT_FINISHED)) |
| { |
| unsigned char devnull[256]; |
| |
| while (frag_len) { |
| i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, NULL, |
| devnull, |
| frag_len > |
| sizeof(devnull) ? sizeof(devnull) : |
| frag_len, 0); |
| if (i <= 0) |
| goto err; |
| frag_len -= i; |
| } |
| } else { |
| if (frag_len != msg_hdr->msg_len) |
| return dtls1_reassemble_fragment(s, msg_hdr, ok); |
| |
| if (frag_len > dtls1_max_handshake_message_len(s)) |
| goto err; |
| |
| frag = dtls1_hm_fragment_new(frag_len, 0); |
| if (frag == NULL) |
| goto err; |
| |
| memcpy(&(frag->msg_header), msg_hdr, sizeof(*msg_hdr)); |
| |
| if (frag_len) { |
| /* |
| * read the body of the fragment (header has already been read |
| */ |
| i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, NULL, |
| frag->fragment, frag_len, 0); |
| if ((unsigned long)i != frag_len) |
| i = -1; |
| if (i <= 0) |
| goto err; |
| } |
| |
| item = pitem_new(seq64be, frag); |
| if (item == NULL) |
| goto err; |
| |
| item = pqueue_insert(s->d1->buffered_messages, item); |
| /* |
| * pqueue_insert fails iff a duplicate item is inserted. However, |
| * |item| cannot be a duplicate. If it were, |pqueue_find|, above, |
| * would have returned it. Then, either |frag_len| != |
| * |msg_hdr->msg_len| in which case |item| is set to NULL and it will |
| * have been processed with |dtls1_reassemble_fragment|, above, or |
| * the record will have been discarded. |
| */ |
| OPENSSL_assert(item != NULL); |
| } |
| |
| return DTLS1_HM_FRAGMENT_RETRY; |
| |
| err: |
| if (item == NULL) |
| dtls1_hm_fragment_free(frag); |
| *ok = 0; |
| return i; |
| } |
| |
| static long |
| dtls1_get_message_fragment(SSL *s, int st1, int stn, int mt, long max, int *ok) |
| { |
| unsigned char wire[DTLS1_HM_HEADER_LENGTH]; |
| unsigned long len, frag_off, frag_len; |
| int i, al, recvd_type; |
| struct hm_header_st msg_hdr; |
| |
| redo: |
| /* see if we have the required fragment already */ |
| if ((frag_len = dtls1_retrieve_buffered_fragment(s, max, ok)) || *ok) { |
| if (*ok) |
| s->init_num = frag_len; |
| return frag_len; |
| } |
| |
| /* read handshake message header */ |
| i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, &recvd_type, wire, |
| DTLS1_HM_HEADER_LENGTH, 0); |
| if (i <= 0) { /* nbio, or an error */ |
| s->rwstate = SSL_READING; |
| *ok = 0; |
| return i; |
| } |
| if(recvd_type == SSL3_RT_CHANGE_CIPHER_SPEC) { |
| /* This isn't a real handshake message - its a CCS. |
| * There is no message sequence number in a CCS to give us confidence |
| * that this was really intended to be at this point in the handshake |
| * sequence. Therefore we only allow this if we were explicitly looking |
| * for it (i.e. if |mt| is -1 we still don't allow it). |
| */ |
| if(mt == SSL3_MT_CHANGE_CIPHER_SPEC) { |
| if (wire[0] != SSL3_MT_CCS) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| SSLerr(SSL_F_DTLS1_GET_MESSAGE_FRAGMENT, SSL_R_BAD_CHANGE_CIPHER_SPEC); |
| goto f_err; |
| } |
| |
| memcpy(s->init_buf->data, wire, i); |
| s->init_num = i - 1; |
| s->init_msg = s->init_buf->data + 1; |
| s->s3->tmp.message_type = SSL3_MT_CHANGE_CIPHER_SPEC; |
| s->s3->tmp.message_size = i - 1; |
| s->state = stn; |
| *ok = 1; |
| return i-1; |
| } else { |
| /* |
| * We weren't expecting a CCS yet. Probably something got |
| * re-ordered or this is a retransmit. We should drop this and try |
| * again. |
| */ |
| s->init_num = 0; |
| goto redo; |
| } |
| } |
| |
| /* Handshake fails if message header is incomplete */ |
| if (i != DTLS1_HM_HEADER_LENGTH) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| SSLerr(SSL_F_DTLS1_GET_MESSAGE_FRAGMENT, SSL_R_UNEXPECTED_MESSAGE); |
| goto f_err; |
| } |
| |
| /* parse the message fragment header */ |
| dtls1_get_message_header(wire, &msg_hdr); |
| |
| len = msg_hdr.msg_len; |
| frag_off = msg_hdr.frag_off; |
| frag_len = msg_hdr.frag_len; |
| |
| /* |
| * We must have at least frag_len bytes left in the record to be read. |
| * Fragments must not span records. |
| */ |
| if (frag_len > RECORD_LAYER_get_rrec_length(&s->rlayer)) { |
| al = SSL3_AD_ILLEGAL_PARAMETER; |
| SSLerr(SSL_F_DTLS1_GET_MESSAGE_FRAGMENT, SSL_R_BAD_LENGTH); |
| goto f_err; |
| } |
| |
| /* |
| * if this is a future (or stale) message it gets buffered |
| * (or dropped)--no further processing at this time |
| * While listening, we accept seq 1 (ClientHello with cookie) |
| * although we're still expecting seq 0 (ClientHello) |
| */ |
| if (msg_hdr.seq != s->d1->handshake_read_seq) |
| return dtls1_process_out_of_seq_message(s, &msg_hdr, ok); |
| |
| if (frag_len && frag_len < len) |
| return dtls1_reassemble_fragment(s, &msg_hdr, ok); |
| |
| if (!s->server && s->d1->r_msg_hdr.frag_off == 0 && |
| wire[0] == SSL3_MT_HELLO_REQUEST) { |
| /* |
| * The server may always send 'Hello Request' messages -- we are |
| * doing a handshake anyway now, so ignore them if their format is |
| * correct. Does not count for 'Finished' MAC. |
| */ |
| if (wire[1] == 0 && wire[2] == 0 && wire[3] == 0) { |
| if (s->msg_callback) |
| s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE, |
| wire, DTLS1_HM_HEADER_LENGTH, s, |
| s->msg_callback_arg); |
| |
| s->init_num = 0; |
| goto redo; |
| } else { /* Incorrectly formated Hello request */ |
| |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| SSLerr(SSL_F_DTLS1_GET_MESSAGE_FRAGMENT, |
| SSL_R_UNEXPECTED_MESSAGE); |
| goto f_err; |
| } |
| } |
| |
| if ((al = dtls1_preprocess_fragment(s, &msg_hdr, max))) |
| goto f_err; |
| |
| if (frag_len > 0) { |
| unsigned char *p = |
| (unsigned char *)s->init_buf->data + DTLS1_HM_HEADER_LENGTH; |
| |
| i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, NULL, |
| &p[frag_off], frag_len, 0); |
| |
| /* |
| * This shouldn't ever fail due to NBIO because we already checked |
| * that we have enough data in the record |
| */ |
| if (i <= 0) { |
| s->rwstate = SSL_READING; |
| *ok = 0; |
| return i; |
| } |
| } else |
| i = 0; |
| |
| /* |
| * XDTLS: an incorrectly formatted fragment should cause the handshake |
| * to fail |
| */ |
| if (i != (int)frag_len) { |
| al = SSL3_AD_ILLEGAL_PARAMETER; |
| SSLerr(SSL_F_DTLS1_GET_MESSAGE_FRAGMENT, SSL3_AD_ILLEGAL_PARAMETER); |
| goto f_err; |
| } |
| |
| *ok = 1; |
| s->state = stn; |
| |
| /* |
| * Note that s->init_num is *not* used as current offset in |
| * s->init_buf->data, but as a counter summing up fragments' lengths: as |
| * soon as they sum up to handshake packet length, we assume we have got |
| * all the fragments. |
| */ |
| s->init_num = frag_len; |
| return frag_len; |
| |
| f_err: |
| ssl3_send_alert(s, SSL3_AL_FATAL, al); |
| s->init_num = 0; |
| |
| *ok = 0; |
| return (-1); |
| } |
| |
| /*- |
| * for these 2 messages, we need to |
| * ssl->enc_read_ctx re-init |
| * ssl->rlayer.read_sequence zero |
| * ssl->s3->read_mac_secret re-init |
| * ssl->session->read_sym_enc assign |
| * ssl->session->read_compression assign |
| * ssl->session->read_hash assign |
| */ |
| int dtls1_send_change_cipher_spec(SSL *s, int a, int b) |
| { |
| unsigned char *p; |
| |
| if (s->state == a) { |
| p = (unsigned char *)s->init_buf->data; |
| *p++ = SSL3_MT_CCS; |
| s->d1->handshake_write_seq = s->d1->next_handshake_write_seq; |
| s->init_num = DTLS1_CCS_HEADER_LENGTH; |
| |
| if (s->version == DTLS1_BAD_VER) { |
| s->d1->next_handshake_write_seq++; |
| s2n(s->d1->handshake_write_seq, p); |
| s->init_num += 2; |
| } |
| |
| s->init_off = 0; |
| |
| dtls1_set_message_header_int(s, SSL3_MT_CCS, 0, |
| s->d1->handshake_write_seq, 0, 0); |
| |
| /* buffer the message to handle re-xmits */ |
| if (!dtls1_buffer_message(s, 1)) { |
| SSLerr(SSL_F_DTLS1_SEND_CHANGE_CIPHER_SPEC, ERR_R_INTERNAL_ERROR); |
| return -1; |
| } |
| |
| s->state = b; |
| } |
| |
| /* SSL3_ST_CW_CHANGE_B */ |
| return (dtls1_do_write(s, SSL3_RT_CHANGE_CIPHER_SPEC)); |
| } |
| |
| int dtls1_read_failed(SSL *s, int code) |
| { |
| if (code > 0) { |
| fprintf(stderr, "invalid state reached %s:%d", __FILE__, __LINE__); |
| return 1; |
| } |
| |
| if (!dtls1_is_timer_expired(s)) { |
| /* |
| * not a timeout, none of our business, let higher layers handle |
| * this. in fact it's probably an error |
| */ |
| return code; |
| } |
| #ifndef OPENSSL_NO_HEARTBEATS |
| /* done, no need to send a retransmit */ |
| if (!SSL_in_init(s) && !s->tlsext_hb_pending) |
| #else |
| /* done, no need to send a retransmit */ |
| if (!SSL_in_init(s)) |
| #endif |
| { |
| BIO_set_flags(SSL_get_rbio(s), BIO_FLAGS_READ); |
| return code; |
| } |
| |
| return dtls1_handle_timeout(s); |
| } |
| |
| int dtls1_get_queue_priority(unsigned short seq, int is_ccs) |
| { |
| /* |
| * The index of the retransmission queue actually is the message sequence |
| * number, since the queue only contains messages of a single handshake. |
| * However, the ChangeCipherSpec has no message sequence number and so |
| * using only the sequence will result in the CCS and Finished having the |
| * same index. To prevent this, the sequence number is multiplied by 2. |
| * In case of a CCS 1 is subtracted. This does not only differ CSS and |
| * Finished, it also maintains the order of the index (important for |
| * priority queues) and fits in the unsigned short variable. |
| */ |
| return seq * 2 - is_ccs; |
| } |
| |
| int dtls1_retransmit_buffered_messages(SSL *s) |
| { |
| pqueue sent = s->d1->sent_messages; |
| piterator iter; |
| pitem *item; |
| hm_fragment *frag; |
| int found = 0; |
| |
| iter = pqueue_iterator(sent); |
| |
| for (item = pqueue_next(&iter); item != NULL; item = pqueue_next(&iter)) { |
| frag = (hm_fragment *)item->data; |
| if (dtls1_retransmit_message(s, (unsigned short) |
| dtls1_get_queue_priority |
| (frag->msg_header.seq, |
| frag->msg_header.is_ccs), 0, |
| &found) <= 0 && found) { |
| fprintf(stderr, "dtls1_retransmit_message() failed\n"); |
| return -1; |
| } |
| } |
| |
| return 1; |
| } |
| |
| int dtls1_buffer_message(SSL *s, int is_ccs) |
| { |
| pitem *item; |
| hm_fragment *frag; |
| unsigned char seq64be[8]; |
| |
| /* |
| * this function is called immediately after a message has been |
| * serialized |
| */ |
| OPENSSL_assert(s->init_off == 0); |
| |
| frag = dtls1_hm_fragment_new(s->init_num, 0); |
| if (!frag) |
| return 0; |
| |
| memcpy(frag->fragment, s->init_buf->data, s->init_num); |
| |
| if (is_ccs) { |
| /* For DTLS1_BAD_VER the header length is non-standard */ |
| OPENSSL_assert(s->d1->w_msg_hdr.msg_len + |
| ((s->version==DTLS1_BAD_VER)?3:DTLS1_CCS_HEADER_LENGTH) |
| == (unsigned int)s->init_num); |
| } else { |
| OPENSSL_assert(s->d1->w_msg_hdr.msg_len + |
| DTLS1_HM_HEADER_LENGTH == (unsigned int)s->init_num); |
| } |
| |
| frag->msg_header.msg_len = s->d1->w_msg_hdr.msg_len; |
| frag->msg_header.seq = s->d1->w_msg_hdr.seq; |
| frag->msg_header.type = s->d1->w_msg_hdr.type; |
| frag->msg_header.frag_off = 0; |
| frag->msg_header.frag_len = s->d1->w_msg_hdr.msg_len; |
| frag->msg_header.is_ccs = is_ccs; |
| |
| /* save current state */ |
| frag->msg_header.saved_retransmit_state.enc_write_ctx = s->enc_write_ctx; |
| frag->msg_header.saved_retransmit_state.write_hash = s->write_hash; |
| frag->msg_header.saved_retransmit_state.compress = s->compress; |
| frag->msg_header.saved_retransmit_state.session = s->session; |
| frag->msg_header.saved_retransmit_state.epoch = |
| DTLS_RECORD_LAYER_get_w_epoch(&s->rlayer); |
| |
| memset(seq64be, 0, sizeof(seq64be)); |
| seq64be[6] = |
| (unsigned |
| char)(dtls1_get_queue_priority(frag->msg_header.seq, |
| frag->msg_header.is_ccs) >> 8); |
| seq64be[7] = |
| (unsigned |
| char)(dtls1_get_queue_priority(frag->msg_header.seq, |
| frag->msg_header.is_ccs)); |
| |
| item = pitem_new(seq64be, frag); |
| if (item == NULL) { |
| dtls1_hm_fragment_free(frag); |
| return 0; |
| } |
| |
| pqueue_insert(s->d1->sent_messages, item); |
| return 1; |
| } |
| |
| int |
| dtls1_retransmit_message(SSL *s, unsigned short seq, unsigned long frag_off, |
| int *found) |
| { |
| int ret; |
| /* XDTLS: for now assuming that read/writes are blocking */ |
| pitem *item; |
| hm_fragment *frag; |
| unsigned long header_length; |
| unsigned char seq64be[8]; |
| struct dtls1_retransmit_state saved_state; |
| |
| /*- |
| OPENSSL_assert(s->init_num == 0); |
| OPENSSL_assert(s->init_off == 0); |
| */ |
| |
| /* XDTLS: the requested message ought to be found, otherwise error */ |
| memset(seq64be, 0, sizeof(seq64be)); |
| seq64be[6] = (unsigned char)(seq >> 8); |
| seq64be[7] = (unsigned char)seq; |
| |
| item = pqueue_find(s->d1->sent_messages, seq64be); |
| if (item == NULL) { |
| fprintf(stderr, "retransmit: message %d non-existant\n", seq); |
| *found = 0; |
| return 0; |
| } |
| |
| *found = 1; |
| frag = (hm_fragment *)item->data; |
| |
| if (frag->msg_header.is_ccs) |
| header_length = DTLS1_CCS_HEADER_LENGTH; |
| else |
| header_length = DTLS1_HM_HEADER_LENGTH; |
| |
| memcpy(s->init_buf->data, frag->fragment, |
| frag->msg_header.msg_len + header_length); |
| s->init_num = frag->msg_header.msg_len + header_length; |
| |
| dtls1_set_message_header_int(s, frag->msg_header.type, |
| frag->msg_header.msg_len, |
| frag->msg_header.seq, 0, |
| frag->msg_header.frag_len); |
| |
| /* save current state */ |
| saved_state.enc_write_ctx = s->enc_write_ctx; |
| saved_state.write_hash = s->write_hash; |
| saved_state.compress = s->compress; |
| saved_state.session = s->session; |
| saved_state.epoch = DTLS_RECORD_LAYER_get_w_epoch(&s->rlayer); |
| |
| s->d1->retransmitting = 1; |
| |
| /* restore state in which the message was originally sent */ |
| s->enc_write_ctx = frag->msg_header.saved_retransmit_state.enc_write_ctx; |
| s->write_hash = frag->msg_header.saved_retransmit_state.write_hash; |
| s->compress = frag->msg_header.saved_retransmit_state.compress; |
| s->session = frag->msg_header.saved_retransmit_state.session; |
| DTLS_RECORD_LAYER_set_saved_w_epoch(&s->rlayer, |
| frag->msg_header.saved_retransmit_state.epoch); |
| |
| ret = dtls1_do_write(s, frag->msg_header.is_ccs ? |
| SSL3_RT_CHANGE_CIPHER_SPEC : SSL3_RT_HANDSHAKE); |
| |
| /* restore current state */ |
| s->enc_write_ctx = saved_state.enc_write_ctx; |
| s->write_hash = saved_state.write_hash; |
| s->compress = saved_state.compress; |
| s->session = saved_state.session; |
| DTLS_RECORD_LAYER_set_saved_w_epoch(&s->rlayer, saved_state.epoch); |
| |
| s->d1->retransmitting = 0; |
| |
| (void)BIO_flush(SSL_get_wbio(s)); |
| return ret; |
| } |
| |
| /* call this function when the buffered messages are no longer needed */ |
| void dtls1_clear_record_buffer(SSL *s) |
| { |
| pitem *item; |
| |
| for (item = pqueue_pop(s->d1->sent_messages); |
| item != NULL; item = pqueue_pop(s->d1->sent_messages)) { |
| dtls1_hm_fragment_free((hm_fragment *)item->data); |
| pitem_free(item); |
| } |
| } |
| |
| void dtls1_set_message_header(SSL *s, unsigned char *p, |
| unsigned char mt, unsigned long len, |
| unsigned long frag_off, |
| unsigned long frag_len) |
| { |
| if (frag_off == 0) { |
| s->d1->handshake_write_seq = s->d1->next_handshake_write_seq; |
| s->d1->next_handshake_write_seq++; |
| } |
| |
| dtls1_set_message_header_int(s, mt, len, s->d1->handshake_write_seq, |
| frag_off, frag_len); |
| } |
| |
| /* don't actually do the writing, wait till the MTU has been retrieved */ |
| static void |
| dtls1_set_message_header_int(SSL *s, unsigned char mt, |
| unsigned long len, unsigned short seq_num, |
| unsigned long frag_off, unsigned long frag_len) |
| { |
| struct hm_header_st *msg_hdr = &s->d1->w_msg_hdr; |
| |
| msg_hdr->type = mt; |
| msg_hdr->msg_len = len; |
| msg_hdr->seq = seq_num; |
| msg_hdr->frag_off = frag_off; |
| msg_hdr->frag_len = frag_len; |
| } |
| |
| static void |
| dtls1_fix_message_header(SSL *s, unsigned long frag_off, |
| unsigned long frag_len) |
| { |
| struct hm_header_st *msg_hdr = &s->d1->w_msg_hdr; |
| |
| msg_hdr->frag_off = frag_off; |
| msg_hdr->frag_len = frag_len; |
| } |
| |
| static unsigned char *dtls1_write_message_header(SSL *s, unsigned char *p) |
| { |
| struct hm_header_st *msg_hdr = &s->d1->w_msg_hdr; |
| |
| *p++ = msg_hdr->type; |
| l2n3(msg_hdr->msg_len, p); |
| |
| s2n(msg_hdr->seq, p); |
| l2n3(msg_hdr->frag_off, p); |
| l2n3(msg_hdr->frag_len, p); |
| |
| return p; |
| } |
| |
| unsigned int dtls1_link_min_mtu(void) |
| { |
| return (g_probable_mtu[(sizeof(g_probable_mtu) / |
| sizeof(g_probable_mtu[0])) - 1]); |
| } |
| |
| unsigned int dtls1_min_mtu(SSL *s) |
| { |
| return dtls1_link_min_mtu() - BIO_dgram_get_mtu_overhead(SSL_get_wbio(s)); |
| } |
| |
| void |
| dtls1_get_message_header(unsigned char *data, struct hm_header_st *msg_hdr) |
| { |
| memset(msg_hdr, 0, sizeof(*msg_hdr)); |
| msg_hdr->type = *(data++); |
| n2l3(data, msg_hdr->msg_len); |
| |
| n2s(data, msg_hdr->seq); |
| n2l3(data, msg_hdr->frag_off); |
| n2l3(data, msg_hdr->frag_len); |
| } |
| |
| int dtls1_shutdown(SSL *s) |
| { |
| int ret; |
| #ifndef OPENSSL_NO_SCTP |
| BIO *wbio; |
| |
| wbio = SSL_get_wbio(s); |
| if (wbio != NULL && BIO_dgram_is_sctp(wbio) && |
| !(s->shutdown & SSL_SENT_SHUTDOWN)) { |
| ret = BIO_dgram_sctp_wait_for_dry(wbio); |
| if (ret < 0) |
| return -1; |
| |
| if (ret == 0) |
| BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SAVE_SHUTDOWN, 1, |
| NULL); |
| } |
| #endif |
| ret = ssl3_shutdown(s); |
| #ifndef OPENSSL_NO_SCTP |
| BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SAVE_SHUTDOWN, 0, NULL); |
| #endif |
| return ret; |
| } |
| |
| #ifndef OPENSSL_NO_HEARTBEATS |
| int dtls1_process_heartbeat(SSL *s, unsigned char *p, unsigned int length) |
| { |
| unsigned char *pl; |
| unsigned short hbtype; |
| unsigned int payload; |
| unsigned int padding = 16; /* Use minimum padding */ |
| |
| if (s->msg_callback) |
| s->msg_callback(0, s->version, TLS1_RT_HEARTBEAT, |
| p, length, s, s->msg_callback_arg); |
| |
| /* Read type and payload length first */ |
| if (1 + 2 + 16 > length) |
| return 0; /* silently discard */ |
| if (length > SSL3_RT_MAX_PLAIN_LENGTH) |
| return 0; /* silently discard per RFC 6520 sec. 4 */ |
| |
| hbtype = *p++; |
| n2s(p, payload); |
| if (1 + 2 + payload + 16 > length) |
| return 0; /* silently discard per RFC 6520 sec. 4 */ |
| pl = p; |
| |
| if (hbtype == TLS1_HB_REQUEST) { |
| unsigned char *buffer, *bp; |
| unsigned int write_length = 1 /* heartbeat type */ + |
| 2 /* heartbeat length */ + |
| payload + padding; |
| int r; |
| |
| if (write_length > SSL3_RT_MAX_PLAIN_LENGTH) |
| return 0; |
| |
| /* |
| * Allocate memory for the response, size is 1 byte message type, |
| * plus 2 bytes payload length, plus payload, plus padding |
| */ |
| buffer = OPENSSL_malloc(write_length); |
| if (buffer == NULL) |
| return -1; |
| bp = buffer; |
| |
| /* Enter response type, length and copy payload */ |
| *bp++ = TLS1_HB_RESPONSE; |
| s2n(payload, bp); |
| memcpy(bp, pl, payload); |
| bp += payload; |
| /* Random padding */ |
| if (RAND_bytes(bp, padding) <= 0) { |
| OPENSSL_free(buffer); |
| return -1; |
| } |
| |
| r = dtls1_write_bytes(s, TLS1_RT_HEARTBEAT, buffer, write_length); |
| |
| if (r >= 0 && s->msg_callback) |
| s->msg_callback(1, s->version, TLS1_RT_HEARTBEAT, |
| buffer, write_length, s, s->msg_callback_arg); |
| |
| OPENSSL_free(buffer); |
| |
| if (r < 0) |
| return r; |
| } else if (hbtype == TLS1_HB_RESPONSE) { |
| unsigned int seq; |
| |
| /* |
| * We only send sequence numbers (2 bytes unsigned int), and 16 |
| * random bytes, so we just try to read the sequence number |
| */ |
| n2s(pl, seq); |
| |
| if (payload == 18 && seq == s->tlsext_hb_seq) { |
| dtls1_stop_timer(s); |
| s->tlsext_hb_seq++; |
| s->tlsext_hb_pending = 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int dtls1_heartbeat(SSL *s) |
| { |
| unsigned char *buf, *p; |
| int ret = -1; |
| unsigned int payload = 18; /* Sequence number + random bytes */ |
| unsigned int padding = 16; /* Use minimum padding */ |
| |
| /* Only send if peer supports and accepts HB requests... */ |
| if (!(s->tlsext_heartbeat & SSL_TLSEXT_HB_ENABLED) || |
| s->tlsext_heartbeat & SSL_TLSEXT_HB_DONT_SEND_REQUESTS) { |
| SSLerr(SSL_F_DTLS1_HEARTBEAT, SSL_R_TLS_HEARTBEAT_PEER_DOESNT_ACCEPT); |
| return -1; |
| } |
| |
| /* ...and there is none in flight yet... */ |
| if (s->tlsext_hb_pending) { |
| SSLerr(SSL_F_DTLS1_HEARTBEAT, SSL_R_TLS_HEARTBEAT_PENDING); |
| return -1; |
| } |
| |
| /* ...and no handshake in progress. */ |
| if (SSL_in_init(s) || s->in_handshake) { |
| SSLerr(SSL_F_DTLS1_HEARTBEAT, SSL_R_UNEXPECTED_MESSAGE); |
| return -1; |
| } |
| |
| /* |
| * Check if padding is too long, payload and padding must not exceed 2^14 |
| * - 3 = 16381 bytes in total. |
| */ |
| OPENSSL_assert(payload + padding <= 16381); |
| |
| /*- |
| * Create HeartBeat message, we just use a sequence number |
| * as payload to distuingish different messages and add |
| * some random stuff. |
| * - Message Type, 1 byte |
| * - Payload Length, 2 bytes (unsigned int) |
| * - Payload, the sequence number (2 bytes uint) |
| * - Payload, random bytes (16 bytes uint) |
| * - Padding |
| */ |
| buf = OPENSSL_malloc(1 + 2 + payload + padding); |
| if (buf == NULL) { |
| SSLerr(SSL_F_DTLS1_HEARTBEAT, ERR_R_MALLOC_FAILURE); |
| return -1; |
| } |
| p = buf; |
| /* Message Type */ |
| *p++ = TLS1_HB_REQUEST; |
| /* Payload length (18 bytes here) */ |
| s2n(payload, p); |
| /* Sequence number */ |
| s2n(s->tlsext_hb_seq, p); |
| /* 16 random bytes */ |
| if (RAND_bytes(p, 16) <= 0) { |
| SSLerr(SSL_F_DTLS1_HEARTBEAT, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| p += 16; |
| /* Random padding */ |
| if (RAND_bytes(p, padding) <= 0) { |
| SSLerr(SSL_F_DTLS1_HEARTBEAT, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| |
| ret = dtls1_write_bytes(s, TLS1_RT_HEARTBEAT, buf, 3 + payload + padding); |
| if (ret >= 0) { |
| if (s->msg_callback) |
| s->msg_callback(1, s->version, TLS1_RT_HEARTBEAT, |
| buf, 3 + payload + padding, |
| s, s->msg_callback_arg); |
| |
| dtls1_start_timer(s); |
| s->tlsext_hb_pending = 1; |
| } |
| |
| err: |
| OPENSSL_free(buf); |
| |
| return ret; |
| } |
| #endif |