|  | /* ssl/t1_enc.c */ | 
|  | /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) | 
|  | * All rights reserved. | 
|  | * | 
|  | * This package is an SSL implementation written | 
|  | * by Eric Young (eay@cryptsoft.com). | 
|  | * The implementation was written so as to conform with Netscapes SSL. | 
|  | * | 
|  | * This library is free for commercial and non-commercial use as long as | 
|  | * the following conditions are aheared to.  The following conditions | 
|  | * apply to all code found in this distribution, be it the RC4, RSA, | 
|  | * lhash, DES, etc., code; not just the SSL code.  The SSL documentation | 
|  | * included with this distribution is covered by the same copyright terms | 
|  | * except that the holder is Tim Hudson (tjh@cryptsoft.com). | 
|  | * | 
|  | * Copyright remains Eric Young's, and as such any Copyright notices in | 
|  | * the code are not to be removed. | 
|  | * If this package is used in a product, Eric Young should be given attribution | 
|  | * as the author of the parts of the library used. | 
|  | * This can be in the form of a textual message at program startup or | 
|  | * in documentation (online or textual) provided with the package. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | * 2. Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in the | 
|  | *    documentation and/or other materials provided with the distribution. | 
|  | * 3. All advertising materials mentioning features or use of this software | 
|  | *    must display the following acknowledgement: | 
|  | *    "This product includes cryptographic software written by | 
|  | *     Eric Young (eay@cryptsoft.com)" | 
|  | *    The word 'cryptographic' can be left out if the rouines from the library | 
|  | *    being used are not cryptographic related :-). | 
|  | * 4. If you include any Windows specific code (or a derivative thereof) from | 
|  | *    the apps directory (application code) you must include an acknowledgement: | 
|  | *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND | 
|  | * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | 
|  | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | 
|  | * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE | 
|  | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
|  | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
|  | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | 
|  | * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | 
|  | * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | 
|  | * SUCH DAMAGE. | 
|  | * | 
|  | * The licence and distribution terms for any publically available version or | 
|  | * derivative of this code cannot be changed.  i.e. this code cannot simply be | 
|  | * copied and put under another distribution licence | 
|  | * [including the GNU Public Licence.] | 
|  | */ | 
|  |  | 
|  | #include <stdio.h> | 
|  | #include "evp.h" | 
|  | #include "hmac.h" | 
|  | #include "ssl_locl.h" | 
|  |  | 
|  | static void tls1_P_hash(md,sec,sec_len,seed,seed_len,out,olen) | 
|  | EVP_MD *md; | 
|  | unsigned char *sec; | 
|  | int sec_len; | 
|  | unsigned char *seed; | 
|  | int seed_len; | 
|  | unsigned char *out; | 
|  | int olen; | 
|  | { | 
|  | int chunk,n; | 
|  | unsigned int j; | 
|  | HMAC_CTX ctx; | 
|  | HMAC_CTX ctx_tmp; | 
|  | unsigned char A1[HMAC_MAX_MD_CBLOCK]; | 
|  | unsigned int A1_len; | 
|  |  | 
|  | chunk=EVP_MD_size(md); | 
|  |  | 
|  | HMAC_Init(&ctx,sec,sec_len,md); | 
|  | HMAC_Update(&ctx,seed,seed_len); | 
|  | HMAC_Final(&ctx,A1,&A1_len); | 
|  |  | 
|  | n=0; | 
|  | for (;;) | 
|  | { | 
|  | HMAC_Init(&ctx,NULL,0,NULL); /* re-init */ | 
|  | HMAC_Update(&ctx,A1,A1_len); | 
|  | memcpy(&ctx_tmp,&ctx,sizeof(ctx)); /* Copy for A2 */ /* not needed for last one */ | 
|  | HMAC_Update(&ctx,seed,seed_len); | 
|  |  | 
|  | if (olen > chunk) | 
|  | { | 
|  | HMAC_Final(&ctx,out,&j); | 
|  | out+=j; | 
|  | olen-=j; | 
|  | HMAC_Final(&ctx_tmp,A1,&A1_len); /* calc the next A1 value */ | 
|  | } | 
|  | else	/* last one */ | 
|  | { | 
|  | HMAC_Final(&ctx,A1,&A1_len); | 
|  | memcpy(out,A1,olen); | 
|  | break; | 
|  | } | 
|  | } | 
|  | HMAC_cleanup(&ctx); | 
|  | HMAC_cleanup(&ctx_tmp); | 
|  | memset(A1,0,sizeof(A1)); | 
|  | } | 
|  |  | 
|  | static void tls1_PRF(md5,sha1,label,label_len,sec,slen,out1,out2,olen) | 
|  | EVP_MD *md5; | 
|  | EVP_MD *sha1; | 
|  | unsigned char *label; | 
|  | int label_len; | 
|  | unsigned char *sec; | 
|  | int slen; | 
|  | unsigned char *out1; | 
|  | unsigned char *out2; | 
|  | int olen; | 
|  | { | 
|  | int len,i; | 
|  | unsigned char *S1,*S2; | 
|  |  | 
|  | len=slen/2; | 
|  | S1=sec; | 
|  | S2= &(sec[len]); | 
|  | len+=(slen&1); /* add for odd, make longer */ | 
|  |  | 
|  |  | 
|  | tls1_P_hash(md5 ,S1,len,label,label_len,out1,olen); | 
|  | tls1_P_hash(sha1,S2,len,label,label_len,out2,olen); | 
|  |  | 
|  | for (i=0; i<olen; i++) | 
|  | out1[i]^=out2[i]; | 
|  | } | 
|  |  | 
|  | static void tls1_generate_key_block(s,km,tmp,num) | 
|  | SSL *s; | 
|  | unsigned char *km,*tmp; | 
|  | int num; | 
|  | { | 
|  | unsigned char *p; | 
|  | unsigned char buf[SSL3_RANDOM_SIZE*2+ | 
|  | TLS_MD_MAX_CONST_SIZE]; | 
|  | p=buf; | 
|  |  | 
|  | memcpy(p,TLS_MD_KEY_EXPANSION_CONST, | 
|  | TLS_MD_KEY_EXPANSION_CONST_SIZE); | 
|  | p+=TLS_MD_KEY_EXPANSION_CONST_SIZE; | 
|  | memcpy(p,s->s3->server_random,SSL3_RANDOM_SIZE); | 
|  | p+=SSL3_RANDOM_SIZE; | 
|  | memcpy(p,s->s3->client_random,SSL3_RANDOM_SIZE); | 
|  | p+=SSL3_RANDOM_SIZE; | 
|  |  | 
|  | tls1_PRF(s->ctx->md5,s->ctx->sha1,buf,(int)(p-buf), | 
|  | s->session->master_key,s->session->master_key_length, | 
|  | km,tmp,num); | 
|  | } | 
|  |  | 
|  | int tls1_change_cipher_state(s,which) | 
|  | SSL *s; | 
|  | int which; | 
|  | { | 
|  | unsigned char *p,*key_block,*mac_secret; | 
|  | unsigned char *exp_label,buf[TLS_MD_MAX_CONST_SIZE+ | 
|  | SSL3_RANDOM_SIZE*2]; | 
|  | unsigned char tmp1[EVP_MAX_KEY_LENGTH]; | 
|  | unsigned char tmp2[EVP_MAX_KEY_LENGTH]; | 
|  | unsigned char iv1[EVP_MAX_IV_LENGTH*2]; | 
|  | unsigned char iv2[EVP_MAX_IV_LENGTH*2]; | 
|  | unsigned char *ms,*key,*iv,*er1,*er2; | 
|  | int client_write; | 
|  | EVP_CIPHER_CTX *dd; | 
|  | EVP_CIPHER *c; | 
|  | COMP_METHOD *comp; | 
|  | EVP_MD *m; | 
|  | int exp,n,i,j,k,exp_label_len; | 
|  |  | 
|  | exp=(s->s3->tmp.new_cipher->algorithms & SSL_EXPORT)?1:0; | 
|  | c=s->s3->tmp.new_sym_enc; | 
|  | m=s->s3->tmp.new_hash; | 
|  | comp=s->s3->tmp.new_compression; | 
|  | key_block=s->s3->tmp.key_block; | 
|  |  | 
|  | if (which & SSL3_CC_READ) | 
|  | { | 
|  | if ((s->enc_read_ctx == NULL) && | 
|  | ((s->enc_read_ctx=(EVP_CIPHER_CTX *) | 
|  | Malloc(sizeof(EVP_CIPHER_CTX))) == NULL)) | 
|  | goto err; | 
|  | dd= s->enc_read_ctx; | 
|  | s->read_hash=m; | 
|  | if (s->expand != NULL) | 
|  | { | 
|  | COMP_CTX_free(s->expand); | 
|  | s->expand=NULL; | 
|  | } | 
|  | if (comp != NULL) | 
|  | { | 
|  | s->expand=COMP_CTX_new(comp); | 
|  | if (s->expand == NULL) | 
|  | { | 
|  | SSLerr(SSL_F_TLS1_CHANGE_CIPHER_STATE,SSL_R_COMPRESSION_LIBRARY_ERROR); | 
|  | goto err2; | 
|  | } | 
|  | s->s3->rrec.comp=(unsigned char *) | 
|  | Malloc(SSL3_RT_MAX_ENCRYPTED_LENGTH); | 
|  | if (s->s3->rrec.comp == NULL) | 
|  | goto err; | 
|  | } | 
|  | memset(&(s->s3->read_sequence[0]),0,8); | 
|  | mac_secret= &(s->s3->read_mac_secret[0]); | 
|  | } | 
|  | else | 
|  | { | 
|  | if ((s->enc_write_ctx == NULL) && | 
|  | ((s->enc_write_ctx=(EVP_CIPHER_CTX *) | 
|  | Malloc(sizeof(EVP_CIPHER_CTX))) == NULL)) | 
|  | goto err; | 
|  | dd= s->enc_write_ctx; | 
|  | s->write_hash=m; | 
|  | if (s->compress != NULL) | 
|  | { | 
|  | COMP_CTX_free(s->compress); | 
|  | s->compress=NULL; | 
|  | } | 
|  | if (comp != NULL) | 
|  | { | 
|  | s->compress=COMP_CTX_new(comp); | 
|  | if (s->compress == NULL) | 
|  | { | 
|  | SSLerr(SSL_F_TLS1_CHANGE_CIPHER_STATE,SSL_R_COMPRESSION_LIBRARY_ERROR); | 
|  | goto err2; | 
|  | } | 
|  | } | 
|  | memset(&(s->s3->write_sequence[0]),0,8); | 
|  | mac_secret= &(s->s3->write_mac_secret[0]); | 
|  | } | 
|  |  | 
|  | EVP_CIPHER_CTX_init(dd); | 
|  |  | 
|  | p=s->s3->tmp.key_block; | 
|  | i=EVP_MD_size(m); | 
|  | j=(exp)?5:EVP_CIPHER_key_length(c); | 
|  | k=EVP_CIPHER_iv_length(c); | 
|  | er1= &(s->s3->client_random[0]); | 
|  | er2= &(s->s3->server_random[0]); | 
|  | if (	(which == SSL3_CHANGE_CIPHER_CLIENT_WRITE) || | 
|  | (which == SSL3_CHANGE_CIPHER_SERVER_READ)) | 
|  | { | 
|  | ms=  &(p[ 0]); n=i+i; | 
|  | key= &(p[ n]); n+=j+j; | 
|  | iv=  &(p[ n]); n+=k+k; | 
|  | exp_label=(unsigned char *)TLS_MD_CLIENT_WRITE_KEY_CONST; | 
|  | exp_label_len=TLS_MD_CLIENT_WRITE_KEY_CONST_SIZE; | 
|  | client_write=1; | 
|  | } | 
|  | else | 
|  | { | 
|  | n=i; | 
|  | ms=  &(p[ n]); n+=i+j; | 
|  | key= &(p[ n]); n+=j+k; | 
|  | iv=  &(p[ n]); n+=k; | 
|  | exp_label=(unsigned char *)TLS_MD_SERVER_WRITE_KEY_CONST; | 
|  | exp_label_len=TLS_MD_SERVER_WRITE_KEY_CONST_SIZE; | 
|  | client_write=0; | 
|  | } | 
|  |  | 
|  | if (n > s->s3->tmp.key_block_length) | 
|  | { | 
|  | SSLerr(SSL_F_TLS1_CHANGE_CIPHER_STATE,SSL_R_INTERNAL_ERROR); | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | memcpy(mac_secret,ms,i); | 
|  | #ifdef TLS_DEBUG | 
|  | printf("which = %04X\nmac key=",which); | 
|  | { int z; for (z=0; z<i; z++) printf("%02X%c",ms[z],((z+1)%16)?' ':'\n'); } | 
|  | #endif | 
|  | if (exp) | 
|  | { | 
|  | /* In here I set both the read and write key/iv to the | 
|  | * same value since only the correct one will be used :-). | 
|  | */ | 
|  | p=buf; | 
|  | memcpy(p,exp_label,exp_label_len); | 
|  | p+=exp_label_len; | 
|  | memcpy(p,s->s3->client_random,SSL3_RANDOM_SIZE); | 
|  | p+=SSL3_RANDOM_SIZE; | 
|  | memcpy(p,s->s3->server_random,SSL3_RANDOM_SIZE); | 
|  | p+=SSL3_RANDOM_SIZE; | 
|  | tls1_PRF(s->ctx->md5,s->ctx->sha1,buf,(int)(p-buf),key,j, | 
|  | tmp1,tmp2,EVP_CIPHER_key_length(c)); | 
|  | key=tmp1; | 
|  |  | 
|  | if (k > 0) | 
|  | { | 
|  | p=buf; | 
|  | memcpy(p,TLS_MD_IV_BLOCK_CONST, | 
|  | TLS_MD_IV_BLOCK_CONST_SIZE); | 
|  | p+=TLS_MD_IV_BLOCK_CONST_SIZE; | 
|  | memcpy(p,s->s3->client_random,SSL3_RANDOM_SIZE); | 
|  | p+=SSL3_RANDOM_SIZE; | 
|  | memcpy(p,s->s3->server_random,SSL3_RANDOM_SIZE); | 
|  | p+=SSL3_RANDOM_SIZE; | 
|  | tls1_PRF(s->ctx->md5,s->ctx->sha1, | 
|  | buf,(int)(p-buf),"",0,iv1,iv2,k*2); | 
|  | if (client_write) | 
|  | iv=iv1; | 
|  | else | 
|  | iv= &(iv1[k]); | 
|  | } | 
|  | } | 
|  |  | 
|  | s->session->key_arg_length=0; | 
|  |  | 
|  | EVP_CipherInit(dd,c,key,iv,(which & SSL3_CC_WRITE)); | 
|  | #ifdef TLS_DEBUG | 
|  | printf("which = %04X\nkey=",which); | 
|  | { int z; for (z=0; z<EVP_CIPHER_key_length(c); z++) printf("%02X%c",key[z],((z+1)%16)?' ':'\n'); } | 
|  | printf("\niv="); | 
|  | { int z; for (z=0; z<k; z++) printf("%02X%c",iv[z],((z+1)%16)?' ':'\n'); } | 
|  | printf("\n"); | 
|  | #endif | 
|  |  | 
|  | memset(tmp1,0,sizeof(tmp1)); | 
|  | memset(tmp2,0,sizeof(tmp1)); | 
|  | memset(iv1,0,sizeof(iv1)); | 
|  | memset(iv2,0,sizeof(iv2)); | 
|  | return(1); | 
|  | err: | 
|  | SSLerr(SSL_F_TLS1_CHANGE_CIPHER_STATE,ERR_R_MALLOC_FAILURE); | 
|  | err2: | 
|  | return(0); | 
|  | } | 
|  |  | 
|  | int tls1_setup_key_block(s) | 
|  | SSL *s; | 
|  | { | 
|  | unsigned char *p1,*p2; | 
|  | EVP_CIPHER *c; | 
|  | EVP_MD *hash; | 
|  | int num,exp; | 
|  |  | 
|  | if (s->s3->tmp.key_block_length != 0) | 
|  | return(1); | 
|  |  | 
|  | if (!ssl_cipher_get_evp(s->session->cipher,&c,&hash)) | 
|  | { | 
|  | SSLerr(SSL_F_TLS1_SETUP_KEY_BLOCK,SSL_R_CIPHER_OR_HASH_UNAVAILABLE); | 
|  | return(0); | 
|  | } | 
|  |  | 
|  | s->s3->tmp.new_sym_enc=c; | 
|  | s->s3->tmp.new_hash=hash; | 
|  |  | 
|  | exp=(s->session->cipher->algorithms & SSL_EXPORT)?1:0; | 
|  |  | 
|  | num=EVP_CIPHER_key_length(c)+EVP_MD_size(hash)+EVP_CIPHER_iv_length(c); | 
|  | num*=2; | 
|  |  | 
|  | ssl3_cleanup_key_block(s); | 
|  |  | 
|  | if ((p1=(unsigned char *)Malloc(num)) == NULL) | 
|  | goto err; | 
|  | if ((p2=(unsigned char *)Malloc(num)) == NULL) | 
|  | goto err; | 
|  |  | 
|  | s->s3->tmp.key_block_length=num; | 
|  | s->s3->tmp.key_block=p1; | 
|  |  | 
|  |  | 
|  | #ifdef TLS_DEBUG | 
|  | printf("client random\n"); | 
|  | { int z; for (z=0; z<SSL3_RANDOM_SIZE; z++) printf("%02X%c",s->s3->client_random[z],((z+1)%16)?' ':'\n'); } | 
|  | printf("server random\n"); | 
|  | { int z; for (z=0; z<SSL3_RANDOM_SIZE; z++) printf("%02X%c",s->s3->server_random[z],((z+1)%16)?' ':'\n'); } | 
|  | printf("pre-master\n"); | 
|  | { int z; for (z=0; z<s->session->master_key_length; z++) printf("%02X%c",s->session->master_key[z],((z+1)%16)?' ':'\n'); } | 
|  | #endif | 
|  | tls1_generate_key_block(s,p1,p2,num); | 
|  | memset(p2,0,num); | 
|  | Free(p2); | 
|  | #ifdef TLS_DEBUG | 
|  | printf("\nkey block\n"); | 
|  | { int z; for (z=0; z<num; z++) printf("%02X%c",p1[z],((z+1)%16)?' ':'\n'); } | 
|  | #endif | 
|  |  | 
|  | return(1); | 
|  | err: | 
|  | SSLerr(SSL_F_TLS1_SETUP_KEY_BLOCK,ERR_R_MALLOC_FAILURE); | 
|  | return(0); | 
|  | } | 
|  |  | 
|  | int tls1_enc(s,send) | 
|  | SSL *s; | 
|  | int send; | 
|  | { | 
|  | SSL3_RECORD *rec; | 
|  | EVP_CIPHER_CTX *ds; | 
|  | unsigned long l; | 
|  | int bs,i,ii,j,k,n=0; | 
|  | EVP_CIPHER *enc; | 
|  |  | 
|  | if (send) | 
|  | { | 
|  | if (s->write_hash != NULL) | 
|  | n=EVP_MD_size(s->write_hash); | 
|  | ds=s->enc_write_ctx; | 
|  | rec= &(s->s3->wrec); | 
|  | if (s->enc_write_ctx == NULL) | 
|  | enc=NULL; | 
|  | else | 
|  | enc=EVP_CIPHER_CTX_cipher(s->enc_write_ctx); | 
|  | } | 
|  | else | 
|  | { | 
|  | if (s->read_hash != NULL) | 
|  | n=EVP_MD_size(s->read_hash); | 
|  | ds=s->enc_read_ctx; | 
|  | rec= &(s->s3->rrec); | 
|  | if (s->enc_read_ctx == NULL) | 
|  | enc=NULL; | 
|  | else | 
|  | enc=EVP_CIPHER_CTX_cipher(s->enc_read_ctx); | 
|  | } | 
|  |  | 
|  | if ((s->session == NULL) || (ds == NULL) || | 
|  | (enc == NULL)) | 
|  | { | 
|  | memcpy(rec->data,rec->input,rec->length); | 
|  | rec->input=rec->data; | 
|  | } | 
|  | else | 
|  | { | 
|  | l=rec->length; | 
|  | bs=EVP_CIPHER_block_size(ds->cipher); | 
|  |  | 
|  | if ((bs != 1) && send) | 
|  | { | 
|  | i=bs-((int)l%bs); | 
|  |  | 
|  | /* Add weird padding of upto 256 bytes */ | 
|  |  | 
|  | /* we need to add 'i' padding bytes of value j */ | 
|  | j=i-1; | 
|  | if (s->options & SSL_OP_TLS_BLOCK_PADDING_BUG) | 
|  | { | 
|  | if (s->s3->flags & TLS1_FLAGS_TLS_PADDING_BUG) | 
|  | j++; | 
|  | } | 
|  | for (k=(int)l; k<(int)(l+i); k++) | 
|  | rec->input[k]=j; | 
|  | l+=i; | 
|  | rec->length+=i; | 
|  | } | 
|  |  | 
|  | EVP_Cipher(ds,rec->data,rec->input,l); | 
|  |  | 
|  | if ((bs != 1) && !send) | 
|  | { | 
|  | ii=i=rec->data[l-1]; | 
|  | i++; | 
|  | if (s->options&SSL_OP_TLS_BLOCK_PADDING_BUG) | 
|  | { | 
|  | /* First packet is even in size, so check */ | 
|  | if ((memcmp(s->s3->read_sequence, | 
|  | "\0\0\0\0\0\0\0\0",8) == 0) && !(ii & 1)) | 
|  | s->s3->flags|=TLS1_FLAGS_TLS_PADDING_BUG; | 
|  | if (s->s3->flags & TLS1_FLAGS_TLS_PADDING_BUG) | 
|  | i--; | 
|  | } | 
|  | if (i > (int)rec->length) | 
|  | { | 
|  | SSLerr(SSL_F_TLS1_ENC,SSL_R_BLOCK_CIPHER_PAD_IS_WRONG); | 
|  | ssl3_send_alert(s,SSL3_AL_FATAL,SSL_AD_DECRYPTION_FAILED); | 
|  | return(0); | 
|  | } | 
|  | for (j=(int)(l-i); j<(int)l; j++) | 
|  | { | 
|  | if (rec->data[j] != ii) | 
|  | { | 
|  | SSLerr(SSL_F_TLS1_ENC,SSL_R_DECRYPTION_FAILED); | 
|  | ssl3_send_alert(s,SSL3_AL_FATAL,SSL_AD_DECRYPTION_FAILED); | 
|  | return(0); | 
|  | } | 
|  | } | 
|  | rec->length-=i; | 
|  | } | 
|  | } | 
|  | return(1); | 
|  | } | 
|  |  | 
|  | int tls1_cert_verify_mac(s,in_ctx,out) | 
|  | SSL *s; | 
|  | EVP_MD_CTX *in_ctx; | 
|  | unsigned char *out; | 
|  | { | 
|  | unsigned int ret; | 
|  | EVP_MD_CTX ctx; | 
|  |  | 
|  | memcpy(&ctx,in_ctx,sizeof(EVP_MD_CTX)); | 
|  | EVP_DigestFinal(&ctx,out,&ret); | 
|  | return((int)ret); | 
|  | } | 
|  |  | 
|  | int tls1_final_finish_mac(s,in1_ctx,in2_ctx,str,slen,out) | 
|  | SSL *s; | 
|  | EVP_MD_CTX *in1_ctx,*in2_ctx; | 
|  | unsigned char *str; | 
|  | int slen; | 
|  | unsigned char *out; | 
|  | { | 
|  | unsigned int i; | 
|  | EVP_MD_CTX ctx; | 
|  | unsigned char buf[TLS_MD_MAX_CONST_SIZE+MD5_DIGEST_LENGTH+SHA_DIGEST_LENGTH]; | 
|  | unsigned char *q,buf2[12]; | 
|  |  | 
|  | q=buf; | 
|  | memcpy(q,str,slen); | 
|  | q+=slen; | 
|  |  | 
|  | memcpy(&ctx,in1_ctx,sizeof(EVP_MD_CTX)); | 
|  | EVP_DigestFinal(&ctx,q,&i); | 
|  | q+=i; | 
|  | memcpy(&ctx,in2_ctx,sizeof(EVP_MD_CTX)); | 
|  | EVP_DigestFinal(&ctx,q,&i); | 
|  | q+=i; | 
|  |  | 
|  | tls1_PRF(s->ctx->md5,s->ctx->sha1,buf,(int)(q-buf), | 
|  | s->session->master_key,s->session->master_key_length, | 
|  | out,buf2,12); | 
|  | memset(&ctx,0,sizeof(EVP_MD_CTX)); | 
|  |  | 
|  | return((int)12); | 
|  | } | 
|  |  | 
|  | int tls1_mac(ssl,md,send) | 
|  | SSL *ssl; | 
|  | unsigned char *md; | 
|  | int send; | 
|  | { | 
|  | SSL3_RECORD *rec; | 
|  | unsigned char *mac_sec,*seq; | 
|  | EVP_MD *hash; | 
|  | unsigned int md_size; | 
|  | int i; | 
|  | HMAC_CTX hmac; | 
|  | unsigned char buf[5]; | 
|  |  | 
|  | if (send) | 
|  | { | 
|  | rec= &(ssl->s3->wrec); | 
|  | mac_sec= &(ssl->s3->write_mac_secret[0]); | 
|  | seq= &(ssl->s3->write_sequence[0]); | 
|  | hash=ssl->write_hash; | 
|  | } | 
|  | else | 
|  | { | 
|  | rec= &(ssl->s3->rrec); | 
|  | mac_sec= &(ssl->s3->read_mac_secret[0]); | 
|  | seq= &(ssl->s3->read_sequence[0]); | 
|  | hash=ssl->read_hash; | 
|  | } | 
|  |  | 
|  | md_size=EVP_MD_size(hash); | 
|  |  | 
|  | buf[0]=rec->type; | 
|  | buf[1]=TLS1_VERSION_MAJOR; | 
|  | buf[2]=TLS1_VERSION_MINOR; | 
|  | buf[3]=rec->length>>8; | 
|  | buf[4]=rec->length&0xff; | 
|  |  | 
|  | /* I should fix this up TLS TLS TLS TLS TLS XXXXXXXX */ | 
|  | HMAC_Init(&hmac,mac_sec,EVP_MD_size(hash),hash); | 
|  | HMAC_Update(&hmac,seq,8); | 
|  | HMAC_Update(&hmac,buf,5); | 
|  | HMAC_Update(&hmac,rec->input,rec->length); | 
|  | HMAC_Final(&hmac,md,&md_size); | 
|  |  | 
|  | #ifdef TLS_DEBUG | 
|  | printf("sec="); | 
|  | {unsigned int z; for (z=0; z<md_size; z++) printf("%02X ",mac_sec[z]); printf("\n"); } | 
|  | printf("seq="); | 
|  | {int z; for (z=0; z<8; z++) printf("%02X ",seq[z]); printf("\n"); } | 
|  | printf("buf="); | 
|  | {int z; for (z=0; z<5; z++) printf("%02X ",buf[z]); printf("\n"); } | 
|  | printf("rec="); | 
|  | {unsigned int z; for (z=0; z<rec->length; z++) printf("%02X ",buf[z]); printf("\n"); } | 
|  | #endif | 
|  |  | 
|  | for (i=7; i>=0; i--) | 
|  | if (++seq[i]) break; | 
|  |  | 
|  | #ifdef TLS_DEBUG | 
|  | {unsigned int z; for (z=0; z<md_size; z++) printf("%02X ",md[z]); printf("\n"); } | 
|  | #endif | 
|  | return(md_size); | 
|  | } | 
|  |  | 
|  | int tls1_generate_master_secret(s,out,p,len) | 
|  | SSL *s; | 
|  | unsigned char *out; | 
|  | unsigned char *p; | 
|  | int len; | 
|  | { | 
|  | unsigned char buf[SSL3_RANDOM_SIZE*2+TLS_MD_MASTER_SECRET_CONST_SIZE]; | 
|  | unsigned char buff[SSL_MAX_MASTER_KEY_LENGTH]; | 
|  |  | 
|  | /* Setup the stuff to munge */ | 
|  | memcpy(buf,TLS_MD_MASTER_SECRET_CONST, | 
|  | TLS_MD_MASTER_SECRET_CONST_SIZE); | 
|  | memcpy(&(buf[TLS_MD_MASTER_SECRET_CONST_SIZE]), | 
|  | s->s3->client_random,SSL3_RANDOM_SIZE); | 
|  | memcpy(&(buf[SSL3_RANDOM_SIZE+TLS_MD_MASTER_SECRET_CONST_SIZE]), | 
|  | s->s3->server_random,SSL3_RANDOM_SIZE); | 
|  | tls1_PRF(s->ctx->md5,s->ctx->sha1, | 
|  | buf,TLS_MD_MASTER_SECRET_CONST_SIZE+SSL3_RANDOM_SIZE*2,p,len, | 
|  | s->session->master_key,buff,SSL3_MASTER_SECRET_SIZE); | 
|  | return(SSL3_MASTER_SECRET_SIZE); | 
|  | } | 
|  |  | 
|  | int tls1_alert_code(code) | 
|  | int code; | 
|  | { | 
|  | switch (code) | 
|  | { | 
|  | case SSL_AD_CLOSE_NOTIFY:	return(SSL3_AD_CLOSE_NOTIFY); | 
|  | case SSL_AD_UNEXPECTED_MESSAGE:	return(SSL3_AD_UNEXPECTED_MESSAGE); | 
|  | case SSL_AD_BAD_RECORD_MAC:	return(SSL3_AD_BAD_RECORD_MAC); | 
|  | case SSL_AD_DECRYPTION_FAILED:	return(TLS1_AD_DECRYPTION_FAILED); | 
|  | case SSL_AD_RECORD_OVERFLOW:	return(TLS1_AD_RECORD_OVERFLOW); | 
|  | case SSL_AD_DECOMPRESSION_FAILURE:return(SSL3_AD_DECOMPRESSION_FAILURE); | 
|  | case SSL_AD_HANDSHAKE_FAILURE:	return(SSL3_AD_HANDSHAKE_FAILURE); | 
|  | case SSL_AD_NO_CERTIFICATE:	return(-1); | 
|  | case SSL_AD_BAD_CERTIFICATE:	return(SSL3_AD_BAD_CERTIFICATE); | 
|  | case SSL_AD_UNSUPPORTED_CERTIFICATE:return(SSL3_AD_UNSUPPORTED_CERTIFICATE); | 
|  | case SSL_AD_CERTIFICATE_REVOKED:return(SSL3_AD_CERTIFICATE_REVOKED); | 
|  | case SSL_AD_CERTIFICATE_EXPIRED:return(SSL3_AD_CERTIFICATE_EXPIRED); | 
|  | case SSL_AD_CERTIFICATE_UNKNOWN:return(SSL3_AD_CERTIFICATE_UNKNOWN); | 
|  | case SSL_AD_ILLEGAL_PARAMETER:	return(SSL3_AD_ILLEGAL_PARAMETER); | 
|  | case SSL_AD_UNKNOWN_CA:		return(TLS1_AD_UNKNOWN_CA); | 
|  | case SSL_AD_ACCESS_DENIED:	return(TLS1_AD_ACCESS_DENIED); | 
|  | case SSL_AD_DECODE_ERROR:	return(TLS1_AD_DECODE_ERROR); | 
|  | case SSL_AD_DECRYPT_ERROR:	return(TLS1_AD_DECRYPT_ERROR); | 
|  | case SSL_AD_EXPORT_RESTRICION:	return(TLS1_AD_EXPORT_RESTRICION); | 
|  | case SSL_AD_PROTOCOL_VERSION:	return(TLS1_AD_PROTOCOL_VERSION); | 
|  | case SSL_AD_INSUFFICIENT_SECURITY:return(TLS1_AD_INSUFFICIENT_SECURITY); | 
|  | case SSL_AD_INTERNAL_ERROR:	return(TLS1_AD_INTERNAL_ERROR); | 
|  | case SSL_AD_USER_CANCLED:	return(TLS1_AD_USER_CANCLED); | 
|  | case SSL_AD_NO_RENEGOTIATION:	return(TLS1_AD_NO_RENEGOTIATION); | 
|  | default:			return(-1); | 
|  | } | 
|  | } | 
|  |  |