blob: a7bcb27e262d6a2933d4a5fe18fded409afc2fa5 [file] [log] [blame]
#! /usr/bin/env perl
# Copyright 2004-2020 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the Apache License 2.0 (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
push(@INC, "${dir}perlasm", "perlasm");
require "x86asm.pl";
$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
&function_begin("OPENSSL_ia32_cpuid");
&xor ("edx","edx");
&pushf ();
&pop ("eax");
&mov ("ecx","eax");
&xor ("eax",1<<21);
&push ("eax");
&popf ();
&pushf ();
&pop ("eax");
&xor ("ecx","eax");
&xor ("eax","eax");
&mov ("esi",&wparam(0));
&mov (&DWP(8,"esi"),"eax"); # clear extended feature flags
&bt ("ecx",21);
&jnc (&label("nocpuid"));
&cpuid ();
&mov ("edi","eax"); # max value for standard query level
&xor ("eax","eax");
&cmp ("ebx",0x756e6547); # "Genu"
&setne (&LB("eax"));
&mov ("ebp","eax");
&cmp ("edx",0x49656e69); # "ineI"
&setne (&LB("eax"));
&or ("ebp","eax");
&cmp ("ecx",0x6c65746e); # "ntel"
&setne (&LB("eax"));
&or ("ebp","eax"); # 0 indicates Intel CPU
&jz (&label("intel"));
&cmp ("ebx",0x68747541); # "Auth"
&setne (&LB("eax"));
&mov ("esi","eax");
&cmp ("edx",0x69746E65); # "enti"
&setne (&LB("eax"));
&or ("esi","eax");
&cmp ("ecx",0x444D4163); # "cAMD"
&setne (&LB("eax"));
&or ("esi","eax"); # 0 indicates AMD CPU
&jnz (&label("intel"));
# AMD specific
&mov ("eax",0x80000000);
&cpuid ();
&cmp ("eax",0x80000001);
&jb (&label("intel"));
&mov ("esi","eax");
&mov ("eax",0x80000001);
&cpuid ();
&or ("ebp","ecx");
&and ("ebp",1<<11|1); # isolate XOP bit
&cmp ("esi",0x80000008);
&jb (&label("intel"));
&mov ("eax",0x80000008);
&cpuid ();
&movz ("esi",&LB("ecx")); # number of cores - 1
&inc ("esi"); # number of cores
&mov ("eax",1);
&xor ("ecx","ecx");
&cpuid ();
&bt ("edx",28);
&jnc (&label("generic"));
&shr ("ebx",16);
&and ("ebx",0xff);
&cmp ("ebx","esi");
&ja (&label("generic"));
&and ("edx",0xefffffff); # clear hyper-threading bit
&jmp (&label("generic"));
&set_label("intel");
&cmp ("edi",4);
&mov ("esi",-1);
&jb (&label("nocacheinfo"));
&mov ("eax",4);
&mov ("ecx",0); # query L1D
&cpuid ();
&mov ("esi","eax");
&shr ("esi",14);
&and ("esi",0xfff); # number of cores -1 per L1D
&set_label("nocacheinfo");
&mov ("eax",1);
&xor ("ecx","ecx");
&cpuid ();
&and ("edx",0xbfefffff); # force reserved bits #20, #30 to 0
&cmp ("ebp",0);
&jne (&label("notintel"));
&or ("edx",1<<30); # set reserved bit#30 on Intel CPUs
&and (&HB("eax"),15); # family ID
&cmp (&HB("eax"),15); # P4?
&jne (&label("notintel"));
&or ("edx",1<<20); # set reserved bit#20 to engage RC4_CHAR
&set_label("notintel");
&bt ("edx",28); # test hyper-threading bit
&jnc (&label("generic"));
&and ("edx",0xefffffff);
&cmp ("esi",0);
&je (&label("generic"));
&or ("edx",0x10000000);
&shr ("ebx",16);
&cmp (&LB("ebx"),1);
&ja (&label("generic"));
&and ("edx",0xefffffff); # clear hyper-threading bit if not
&set_label("generic");
&and ("ebp",1<<11); # isolate AMD XOP flag
&and ("ecx",0xfffff7ff); # force 11th bit to 0
&mov ("esi","edx"); # %ebp:%esi is copy of %ecx:%edx
&or ("ebp","ecx"); # merge AMD XOP flag
&cmp ("edi",7);
&mov ("edi",&wparam(0));
&jb (&label("no_extended_info"));
&mov ("eax",7);
&xor ("ecx","ecx");
&cpuid ();
&mov (&DWP(8,"edi"),"ebx"); # save extended feature flag
&set_label("no_extended_info");
&bt ("ebp",27); # check OSXSAVE bit
&jnc (&label("clear_avx"));
&xor ("ecx","ecx");
&data_byte(0x0f,0x01,0xd0); # xgetbv
&and ("eax",6);
&cmp ("eax",6);
&je (&label("done"));
&cmp ("eax",2);
&je (&label("clear_avx"));
&set_label("clear_xmm");
&and ("ebp",0xfdfffffd); # clear AESNI and PCLMULQDQ bits
&and ("esi",0xfeffffff); # clear FXSR
&set_label("clear_avx");
&and ("ebp",0xefffe7ff); # clear AVX, FMA and AMD XOP bits
&and (&DWP(8,"edi"),0xffffffdf); # clear AVX2
&set_label("done");
&mov ("eax","esi");
&mov ("edx","ebp");
&set_label("nocpuid");
&function_end("OPENSSL_ia32_cpuid");
&external_label("OPENSSL_ia32cap_P");
&function_begin_B("OPENSSL_rdtsc","EXTRN\t_OPENSSL_ia32cap_P:DWORD");
&xor ("eax","eax");
&xor ("edx","edx");
&picmeup("ecx","OPENSSL_ia32cap_P");
&bt (&DWP(0,"ecx"),4);
&jnc (&label("notsc"));
&rdtsc ();
&set_label("notsc");
&ret ();
&function_end_B("OPENSSL_rdtsc");
# This works in Ring 0 only [read DJGPP+MS-DOS+privileged DPMI host],
# but it's safe to call it on any [supported] 32-bit platform...
# Just check for [non-]zero return value...
&function_begin_B("OPENSSL_instrument_halt","EXTRN\t_OPENSSL_ia32cap_P:DWORD");
&picmeup("ecx","OPENSSL_ia32cap_P");
&bt (&DWP(0,"ecx"),4);
&jnc (&label("nohalt")); # no TSC
&data_word(0x9058900e); # push %cs; pop %eax
&and ("eax",3);
&jnz (&label("nohalt")); # not enough privileges
&pushf ();
&pop ("eax");
&bt ("eax",9);
&jnc (&label("nohalt")); # interrupts are disabled
&rdtsc ();
&push ("edx");
&push ("eax");
&halt ();
&rdtsc ();
&sub ("eax",&DWP(0,"esp"));
&sbb ("edx",&DWP(4,"esp"));
&add ("esp",8);
&ret ();
&set_label("nohalt");
&xor ("eax","eax");
&xor ("edx","edx");
&ret ();
&function_end_B("OPENSSL_instrument_halt");
# Essentially there is only one use for this function. Under DJGPP:
#
# #include <go32.h>
# ...
# i=OPENSSL_far_spin(_dos_ds,0x46c);
# ...
# to obtain the number of spins till closest timer interrupt.
&function_begin_B("OPENSSL_far_spin");
&pushf ();
&pop ("eax");
&bt ("eax",9);
&jnc (&label("nospin")); # interrupts are disabled
&mov ("eax",&DWP(4,"esp"));
&mov ("ecx",&DWP(8,"esp"));
&data_word (0x90d88e1e); # push %ds, mov %eax,%ds
&xor ("eax","eax");
&mov ("edx",&DWP(0,"ecx"));
&jmp (&label("spin"));
&align (16);
&set_label("spin");
&inc ("eax");
&cmp ("edx",&DWP(0,"ecx"));
&je (&label("spin"));
&data_word (0x1f909090); # pop %ds
&ret ();
&set_label("nospin");
&xor ("eax","eax");
&xor ("edx","edx");
&ret ();
&function_end_B("OPENSSL_far_spin");
&function_begin_B("OPENSSL_wipe_cpu","EXTRN\t_OPENSSL_ia32cap_P:DWORD");
&xor ("eax","eax");
&xor ("edx","edx");
&picmeup("ecx","OPENSSL_ia32cap_P");
&mov ("ecx",&DWP(0,"ecx"));
&bt (&DWP(0,"ecx"),1);
&jnc (&label("no_x87"));
if ($sse2) {
&and ("ecx",1<<26|1<<24); # check SSE2 and FXSR bits
&cmp ("ecx",1<<26|1<<24);
&jne (&label("no_sse2"));
&pxor ("xmm0","xmm0");
&pxor ("xmm1","xmm1");
&pxor ("xmm2","xmm2");
&pxor ("xmm3","xmm3");
&pxor ("xmm4","xmm4");
&pxor ("xmm5","xmm5");
&pxor ("xmm6","xmm6");
&pxor ("xmm7","xmm7");
&set_label("no_sse2");
}
# just a bunch of fldz to zap the fp/mm bank followed by finit...
&data_word(0xeed9eed9,0xeed9eed9,0xeed9eed9,0xeed9eed9,0x90e3db9b);
&set_label("no_x87");
&lea ("eax",&DWP(4,"esp"));
&ret ();
&function_end_B("OPENSSL_wipe_cpu");
&function_begin_B("OPENSSL_atomic_add");
&mov ("edx",&DWP(4,"esp")); # fetch the pointer, 1st arg
&mov ("ecx",&DWP(8,"esp")); # fetch the increment, 2nd arg
&push ("ebx");
&nop ();
&mov ("eax",&DWP(0,"edx"));
&set_label("spin");
&lea ("ebx",&DWP(0,"eax","ecx"));
&nop ();
&data_word(0x1ab10ff0); # lock; cmpxchg %ebx,(%edx) # %eax is involved and is always reloaded
&jne (&label("spin"));
&mov ("eax","ebx"); # OpenSSL expects the new value
&pop ("ebx");
&ret ();
&function_end_B("OPENSSL_atomic_add");
&function_begin_B("OPENSSL_cleanse");
&mov ("edx",&wparam(0));
&mov ("ecx",&wparam(1));
&xor ("eax","eax");
&cmp ("ecx",7);
&jae (&label("lot"));
&cmp ("ecx",0);
&je (&label("ret"));
&set_label("little");
&mov (&BP(0,"edx"),"al");
&sub ("ecx",1);
&lea ("edx",&DWP(1,"edx"));
&jnz (&label("little"));
&set_label("ret");
&ret ();
&set_label("lot",16);
&test ("edx",3);
&jz (&label("aligned"));
&mov (&BP(0,"edx"),"al");
&lea ("ecx",&DWP(-1,"ecx"));
&lea ("edx",&DWP(1,"edx"));
&jmp (&label("lot"));
&set_label("aligned");
&mov (&DWP(0,"edx"),"eax");
&lea ("ecx",&DWP(-4,"ecx"));
&test ("ecx",-4);
&lea ("edx",&DWP(4,"edx"));
&jnz (&label("aligned"));
&cmp ("ecx",0);
&jne (&label("little"));
&ret ();
&function_end_B("OPENSSL_cleanse");
&function_begin_B("CRYPTO_memcmp");
&push ("esi");
&push ("edi");
&mov ("esi",&wparam(0));
&mov ("edi",&wparam(1));
&mov ("ecx",&wparam(2));
&xor ("eax","eax");
&xor ("edx","edx");
&cmp ("ecx",0);
&je (&label("no_data"));
&set_label("loop");
&mov ("dl",&BP(0,"esi"));
&lea ("esi",&DWP(1,"esi"));
&xor ("dl",&BP(0,"edi"));
&lea ("edi",&DWP(1,"edi"));
&or ("al","dl");
&dec ("ecx");
&jnz (&label("loop"));
&neg ("eax");
&shr ("eax",31);
&set_label("no_data");
&pop ("edi");
&pop ("esi");
&ret ();
&function_end_B("CRYPTO_memcmp");
{
my $lasttick = "esi";
my $lastdiff = "ebx";
my $out = "edi";
my $cnt = "ecx";
my $max = "ebp";
&function_begin("OPENSSL_instrument_bus");
&mov ("eax",0);
if ($sse2) {
&picmeup("edx","OPENSSL_ia32cap_P");
&bt (&DWP(0,"edx"),4);
&jnc (&label("nogo")); # no TSC
&bt (&DWP(0,"edx"),19);
&jnc (&label("nogo")); # no CLFLUSH
&mov ($out,&wparam(0)); # load arguments
&mov ($cnt,&wparam(1));
# collect 1st tick
&rdtsc ();
&mov ($lasttick,"eax"); # lasttick = tick
&mov ($lastdiff,0); # lastdiff = 0
&clflush(&DWP(0,$out));
&data_byte(0xf0); # lock
&add (&DWP(0,$out),$lastdiff);
&jmp (&label("loop"));
&set_label("loop",16);
&rdtsc ();
&mov ("edx","eax"); # put aside tick (yes, I neglect edx)
&sub ("eax",$lasttick); # diff
&mov ($lasttick,"edx"); # lasttick = tick
&mov ($lastdiff,"eax"); # lastdiff = diff
&clflush(&DWP(0,$out));
&data_byte(0xf0); # lock
&add (&DWP(0,$out),"eax"); # accumulate diff
&lea ($out,&DWP(4,$out)); # ++$out
&sub ($cnt,1); # --$cnt
&jnz (&label("loop"));
&mov ("eax",&wparam(1));
&set_label("nogo");
}
&function_end("OPENSSL_instrument_bus");
&function_begin("OPENSSL_instrument_bus2");
&mov ("eax",0);
if ($sse2) {
&picmeup("edx","OPENSSL_ia32cap_P");
&bt (&DWP(0,"edx"),4);
&jnc (&label("nogo")); # no TSC
&bt (&DWP(0,"edx"),19);
&jnc (&label("nogo")); # no CLFLUSH
&mov ($out,&wparam(0)); # load arguments
&mov ($cnt,&wparam(1));
&mov ($max,&wparam(2));
&rdtsc (); # collect 1st tick
&mov ($lasttick,"eax"); # lasttick = tick
&mov ($lastdiff,0); # lastdiff = 0
&clflush(&DWP(0,$out));
&data_byte(0xf0); # lock
&add (&DWP(0,$out),$lastdiff);
&rdtsc (); # collect 1st diff
&mov ("edx","eax"); # put aside tick (yes, I neglect edx)
&sub ("eax",$lasttick); # diff
&mov ($lasttick,"edx"); # lasttick = tick
&mov ($lastdiff,"eax"); # lastdiff = diff
&jmp (&label("loop2"));
&set_label("loop2",16);
&clflush(&DWP(0,$out));
&data_byte(0xf0); # lock
&add (&DWP(0,$out),"eax"); # accumulate diff
&sub ($max,1);
&jz (&label("done2"));
&rdtsc ();
&mov ("edx","eax"); # put aside tick (yes, I neglect edx)
&sub ("eax",$lasttick); # diff
&mov ($lasttick,"edx"); # lasttick = tick
&cmp ("eax",$lastdiff);
&mov ($lastdiff,"eax"); # lastdiff = diff
&mov ("edx",0);
&setne ("dl");
&sub ($cnt,"edx"); # conditional --$cnt
&lea ($out,&DWP(0,$out,"edx",4)); # conditional ++$out
&jnz (&label("loop2"));
&set_label("done2");
&mov ("eax",&wparam(1));
&sub ("eax",$cnt);
&set_label("nogo");
}
&function_end("OPENSSL_instrument_bus2");
}
sub gen_random {
my $rdop = shift;
&function_begin_B("OPENSSL_ia32_${rdop}_bytes");
&push ("edi");
&push ("ebx");
&xor ("eax","eax"); # return value
&mov ("edi",&wparam(0));
&mov ("ebx",&wparam(1));
&cmp ("ebx",0);
&je (&label("done"));
&mov ("ecx",8);
&set_label("loop");
&${rdop}("edx");
&jc (&label("break"));
&loop (&label("loop"));
&jmp (&label("done"));
&set_label("break",16);
&cmp ("ebx",4);
&jb (&label("tail"));
&mov (&DWP(0,"edi"),"edx");
&lea ("edi",&DWP(4,"edi"));
&add ("eax",4);
&sub ("ebx",4);
&jz (&label("done"));
&mov ("ecx",8);
&jmp (&label("loop"));
&set_label("tail",16);
&mov (&BP(0,"edi"),"dl");
&lea ("edi",&DWP(1,"edi"));
&inc ("eax");
&shr ("edx",8);
&dec ("ebx");
&jnz (&label("tail"));
&set_label("done");
&xor ("edx","edx"); # Clear random value from registers
&pop ("ebx");
&pop ("edi");
&ret ();
&function_end_B("OPENSSL_ia32_${rdop}_bytes");
}
&gen_random("rdrand");
&gen_random("rdseed");
&initseg("OPENSSL_cpuid_setup");
&hidden("OPENSSL_cpuid_setup");
&hidden("OPENSSL_ia32cap_P");
&asm_finish();
close STDOUT or die "error closing STDOUT: $!";