| /* |
| * Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. |
| * |
| * Licensed under the OpenSSL license (the "License"). You may not use |
| * this file except in compliance with the License. You can obtain a copy |
| * in the file LICENSE in the source distribution or at |
| * https://www.openssl.org/source/license.html |
| */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <openssl/objects.h> |
| #include <openssl/evp.h> |
| #include <openssl/hmac.h> |
| #include <openssl/ocsp.h> |
| #include <openssl/conf.h> |
| #include <openssl/x509v3.h> |
| #include <openssl/dh.h> |
| #include <openssl/bn.h> |
| #include "ssl_locl.h" |
| #include <openssl/ct.h> |
| |
| SSL3_ENC_METHOD const TLSv1_enc_data = { |
| tls1_enc, |
| tls1_mac, |
| tls1_setup_key_block, |
| tls1_generate_master_secret, |
| tls1_change_cipher_state, |
| tls1_final_finish_mac, |
| TLS_MD_CLIENT_FINISH_CONST, TLS_MD_CLIENT_FINISH_CONST_SIZE, |
| TLS_MD_SERVER_FINISH_CONST, TLS_MD_SERVER_FINISH_CONST_SIZE, |
| tls1_alert_code, |
| tls1_export_keying_material, |
| 0, |
| ssl3_set_handshake_header, |
| tls_close_construct_packet, |
| ssl3_handshake_write |
| }; |
| |
| SSL3_ENC_METHOD const TLSv1_1_enc_data = { |
| tls1_enc, |
| tls1_mac, |
| tls1_setup_key_block, |
| tls1_generate_master_secret, |
| tls1_change_cipher_state, |
| tls1_final_finish_mac, |
| TLS_MD_CLIENT_FINISH_CONST, TLS_MD_CLIENT_FINISH_CONST_SIZE, |
| TLS_MD_SERVER_FINISH_CONST, TLS_MD_SERVER_FINISH_CONST_SIZE, |
| tls1_alert_code, |
| tls1_export_keying_material, |
| SSL_ENC_FLAG_EXPLICIT_IV, |
| ssl3_set_handshake_header, |
| tls_close_construct_packet, |
| ssl3_handshake_write |
| }; |
| |
| SSL3_ENC_METHOD const TLSv1_2_enc_data = { |
| tls1_enc, |
| tls1_mac, |
| tls1_setup_key_block, |
| tls1_generate_master_secret, |
| tls1_change_cipher_state, |
| tls1_final_finish_mac, |
| TLS_MD_CLIENT_FINISH_CONST, TLS_MD_CLIENT_FINISH_CONST_SIZE, |
| TLS_MD_SERVER_FINISH_CONST, TLS_MD_SERVER_FINISH_CONST_SIZE, |
| tls1_alert_code, |
| tls1_export_keying_material, |
| SSL_ENC_FLAG_EXPLICIT_IV | SSL_ENC_FLAG_SIGALGS | SSL_ENC_FLAG_SHA256_PRF |
| | SSL_ENC_FLAG_TLS1_2_CIPHERS, |
| ssl3_set_handshake_header, |
| tls_close_construct_packet, |
| ssl3_handshake_write |
| }; |
| |
| SSL3_ENC_METHOD const TLSv1_3_enc_data = { |
| tls13_enc, |
| tls1_mac, |
| tls13_setup_key_block, |
| tls13_generate_master_secret, |
| tls13_change_cipher_state, |
| tls13_final_finish_mac, |
| TLS_MD_CLIENT_FINISH_CONST, TLS_MD_CLIENT_FINISH_CONST_SIZE, |
| TLS_MD_SERVER_FINISH_CONST, TLS_MD_SERVER_FINISH_CONST_SIZE, |
| tls13_alert_code, |
| tls1_export_keying_material, |
| SSL_ENC_FLAG_SIGALGS | SSL_ENC_FLAG_SHA256_PRF, |
| ssl3_set_handshake_header, |
| tls_close_construct_packet, |
| ssl3_handshake_write |
| }; |
| |
| long tls1_default_timeout(void) |
| { |
| /* |
| * 2 hours, the 24 hours mentioned in the TLSv1 spec is way too long for |
| * http, the cache would over fill |
| */ |
| return (60 * 60 * 2); |
| } |
| |
| int tls1_new(SSL *s) |
| { |
| if (!ssl3_new(s)) |
| return (0); |
| s->method->ssl_clear(s); |
| return (1); |
| } |
| |
| void tls1_free(SSL *s) |
| { |
| OPENSSL_free(s->ext.session_ticket); |
| ssl3_free(s); |
| } |
| |
| void tls1_clear(SSL *s) |
| { |
| ssl3_clear(s); |
| if (s->method->version == TLS_ANY_VERSION) |
| s->version = TLS_MAX_VERSION; |
| else |
| s->version = s->method->version; |
| } |
| |
| #ifndef OPENSSL_NO_EC |
| |
| typedef struct { |
| int nid; /* Curve NID */ |
| int secbits; /* Bits of security (from SP800-57) */ |
| unsigned int flags; /* Flags: currently just field type */ |
| } tls_curve_info; |
| |
| /* |
| * Table of curve information. |
| * Do not delete entries or reorder this array! It is used as a lookup |
| * table: the index of each entry is one less than the TLS curve id. |
| */ |
| static const tls_curve_info nid_list[] = { |
| {NID_sect163k1, 80, TLS_CURVE_CHAR2}, /* sect163k1 (1) */ |
| {NID_sect163r1, 80, TLS_CURVE_CHAR2}, /* sect163r1 (2) */ |
| {NID_sect163r2, 80, TLS_CURVE_CHAR2}, /* sect163r2 (3) */ |
| {NID_sect193r1, 80, TLS_CURVE_CHAR2}, /* sect193r1 (4) */ |
| {NID_sect193r2, 80, TLS_CURVE_CHAR2}, /* sect193r2 (5) */ |
| {NID_sect233k1, 112, TLS_CURVE_CHAR2}, /* sect233k1 (6) */ |
| {NID_sect233r1, 112, TLS_CURVE_CHAR2}, /* sect233r1 (7) */ |
| {NID_sect239k1, 112, TLS_CURVE_CHAR2}, /* sect239k1 (8) */ |
| {NID_sect283k1, 128, TLS_CURVE_CHAR2}, /* sect283k1 (9) */ |
| {NID_sect283r1, 128, TLS_CURVE_CHAR2}, /* sect283r1 (10) */ |
| {NID_sect409k1, 192, TLS_CURVE_CHAR2}, /* sect409k1 (11) */ |
| {NID_sect409r1, 192, TLS_CURVE_CHAR2}, /* sect409r1 (12) */ |
| {NID_sect571k1, 256, TLS_CURVE_CHAR2}, /* sect571k1 (13) */ |
| {NID_sect571r1, 256, TLS_CURVE_CHAR2}, /* sect571r1 (14) */ |
| {NID_secp160k1, 80, TLS_CURVE_PRIME}, /* secp160k1 (15) */ |
| {NID_secp160r1, 80, TLS_CURVE_PRIME}, /* secp160r1 (16) */ |
| {NID_secp160r2, 80, TLS_CURVE_PRIME}, /* secp160r2 (17) */ |
| {NID_secp192k1, 80, TLS_CURVE_PRIME}, /* secp192k1 (18) */ |
| {NID_X9_62_prime192v1, 80, TLS_CURVE_PRIME}, /* secp192r1 (19) */ |
| {NID_secp224k1, 112, TLS_CURVE_PRIME}, /* secp224k1 (20) */ |
| {NID_secp224r1, 112, TLS_CURVE_PRIME}, /* secp224r1 (21) */ |
| {NID_secp256k1, 128, TLS_CURVE_PRIME}, /* secp256k1 (22) */ |
| {NID_X9_62_prime256v1, 128, TLS_CURVE_PRIME}, /* secp256r1 (23) */ |
| {NID_secp384r1, 192, TLS_CURVE_PRIME}, /* secp384r1 (24) */ |
| {NID_secp521r1, 256, TLS_CURVE_PRIME}, /* secp521r1 (25) */ |
| {NID_brainpoolP256r1, 128, TLS_CURVE_PRIME}, /* brainpoolP256r1 (26) */ |
| {NID_brainpoolP384r1, 192, TLS_CURVE_PRIME}, /* brainpoolP384r1 (27) */ |
| {NID_brainpoolP512r1, 256, TLS_CURVE_PRIME}, /* brainpool512r1 (28) */ |
| {NID_X25519, 128, TLS_CURVE_CUSTOM}, /* X25519 (29) */ |
| }; |
| |
| static const unsigned char ecformats_default[] = { |
| TLSEXT_ECPOINTFORMAT_uncompressed, |
| TLSEXT_ECPOINTFORMAT_ansiX962_compressed_prime, |
| TLSEXT_ECPOINTFORMAT_ansiX962_compressed_char2 |
| }; |
| |
| /* The default curves */ |
| static const unsigned char eccurves_default[] = { |
| 0, 29, /* X25519 (29) */ |
| 0, 23, /* secp256r1 (23) */ |
| 0, 25, /* secp521r1 (25) */ |
| 0, 24, /* secp384r1 (24) */ |
| }; |
| |
| static const unsigned char suiteb_curves[] = { |
| 0, TLSEXT_curve_P_256, |
| 0, TLSEXT_curve_P_384 |
| }; |
| |
| int tls1_ec_curve_id2nid(int curve_id, unsigned int *pflags) |
| { |
| const tls_curve_info *cinfo; |
| /* ECC curves from RFC 4492 and RFC 7027 */ |
| if ((curve_id < 1) || ((unsigned int)curve_id > OSSL_NELEM(nid_list))) |
| return 0; |
| cinfo = nid_list + curve_id - 1; |
| if (pflags) |
| *pflags = cinfo->flags; |
| return cinfo->nid; |
| } |
| |
| int tls1_ec_nid2curve_id(int nid) |
| { |
| size_t i; |
| for (i = 0; i < OSSL_NELEM(nid_list); i++) { |
| if (nid_list[i].nid == nid) |
| return (int)(i + 1); |
| } |
| return 0; |
| } |
| |
| /* |
| * Get curves list, if "sess" is set return client curves otherwise |
| * preferred list. |
| * Sets |num_curves| to the number of curves in the list, i.e., |
| * the length of |pcurves| is 2 * num_curves. |
| * Returns 1 on success and 0 if the client curves list has invalid format. |
| * The latter indicates an internal error: we should not be accepting such |
| * lists in the first place. |
| * TODO(emilia): we should really be storing the curves list in explicitly |
| * parsed form instead. (However, this would affect binary compatibility |
| * so cannot happen in the 1.0.x series.) |
| */ |
| int tls1_get_curvelist(SSL *s, int sess, const unsigned char **pcurves, |
| size_t *num_curves) |
| { |
| size_t pcurveslen = 0; |
| |
| if (sess) { |
| *pcurves = s->session->ext.supportedgroups; |
| pcurveslen = s->session->ext.supportedgroups_len; |
| } else { |
| /* For Suite B mode only include P-256, P-384 */ |
| switch (tls1_suiteb(s)) { |
| case SSL_CERT_FLAG_SUITEB_128_LOS: |
| *pcurves = suiteb_curves; |
| pcurveslen = sizeof(suiteb_curves); |
| break; |
| |
| case SSL_CERT_FLAG_SUITEB_128_LOS_ONLY: |
| *pcurves = suiteb_curves; |
| pcurveslen = 2; |
| break; |
| |
| case SSL_CERT_FLAG_SUITEB_192_LOS: |
| *pcurves = suiteb_curves + 2; |
| pcurveslen = 2; |
| break; |
| default: |
| *pcurves = s->ext.supportedgroups; |
| pcurveslen = s->ext.supportedgroups_len; |
| } |
| if (!*pcurves) { |
| *pcurves = eccurves_default; |
| pcurveslen = sizeof(eccurves_default); |
| } |
| } |
| |
| /* We do not allow odd length arrays to enter the system. */ |
| if (pcurveslen & 1) { |
| SSLerr(SSL_F_TLS1_GET_CURVELIST, ERR_R_INTERNAL_ERROR); |
| *num_curves = 0; |
| return 0; |
| } |
| *num_curves = pcurveslen / 2; |
| return 1; |
| } |
| |
| /* See if curve is allowed by security callback */ |
| int tls_curve_allowed(SSL *s, const unsigned char *curve, int op) |
| { |
| const tls_curve_info *cinfo; |
| if (curve[0]) |
| return 1; |
| if ((curve[1] < 1) || ((size_t)curve[1] > OSSL_NELEM(nid_list))) |
| return 0; |
| cinfo = &nid_list[curve[1] - 1]; |
| # ifdef OPENSSL_NO_EC2M |
| if (cinfo->flags & TLS_CURVE_CHAR2) |
| return 0; |
| # endif |
| return ssl_security(s, op, cinfo->secbits, cinfo->nid, (void *)curve); |
| } |
| |
| /* Check a curve is one of our preferences */ |
| int tls1_check_curve(SSL *s, const unsigned char *p, size_t len) |
| { |
| const unsigned char *curves; |
| size_t num_curves, i; |
| unsigned int suiteb_flags = tls1_suiteb(s); |
| if (len != 3 || p[0] != NAMED_CURVE_TYPE) |
| return 0; |
| /* Check curve matches Suite B preferences */ |
| if (suiteb_flags) { |
| unsigned long cid = s->s3->tmp.new_cipher->id; |
| if (p[1]) |
| return 0; |
| if (cid == TLS1_CK_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256) { |
| if (p[2] != TLSEXT_curve_P_256) |
| return 0; |
| } else if (cid == TLS1_CK_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384) { |
| if (p[2] != TLSEXT_curve_P_384) |
| return 0; |
| } else /* Should never happen */ |
| return 0; |
| } |
| if (!tls1_get_curvelist(s, 0, &curves, &num_curves)) |
| return 0; |
| for (i = 0; i < num_curves; i++, curves += 2) { |
| if (p[1] == curves[0] && p[2] == curves[1]) |
| return tls_curve_allowed(s, p + 1, SSL_SECOP_CURVE_CHECK); |
| } |
| return 0; |
| } |
| |
| /*- |
| * For nmatch >= 0, return the NID of the |nmatch|th shared group or NID_undef |
| * if there is no match. |
| * For nmatch == -1, return number of matches |
| * For nmatch == -2, return the NID of the group to use for |
| * an EC tmp key, or NID_undef if there is no match. |
| */ |
| int tls1_shared_group(SSL *s, int nmatch) |
| { |
| const unsigned char *pref, *supp; |
| size_t num_pref, num_supp, i, j; |
| int k; |
| |
| /* Can't do anything on client side */ |
| if (s->server == 0) |
| return -1; |
| if (nmatch == -2) { |
| if (tls1_suiteb(s)) { |
| /* |
| * For Suite B ciphersuite determines curve: we already know |
| * these are acceptable due to previous checks. |
| */ |
| unsigned long cid = s->s3->tmp.new_cipher->id; |
| |
| if (cid == TLS1_CK_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256) |
| return NID_X9_62_prime256v1; /* P-256 */ |
| if (cid == TLS1_CK_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384) |
| return NID_secp384r1; /* P-384 */ |
| /* Should never happen */ |
| return NID_undef; |
| } |
| /* If not Suite B just return first preference shared curve */ |
| nmatch = 0; |
| } |
| /* |
| * Avoid truncation. tls1_get_curvelist takes an int |
| * but s->options is a long... |
| */ |
| if (!tls1_get_curvelist(s, |
| (s->options & SSL_OP_CIPHER_SERVER_PREFERENCE) != 0, |
| &supp, &num_supp)) |
| /* In practice, NID_undef == 0 but let's be precise. */ |
| return nmatch == -1 ? 0 : NID_undef; |
| if (!tls1_get_curvelist(s, |
| (s->options & SSL_OP_CIPHER_SERVER_PREFERENCE) == 0, |
| &pref, &num_pref)) |
| return nmatch == -1 ? 0 : NID_undef; |
| |
| for (k = 0, i = 0; i < num_pref; i++, pref += 2) { |
| const unsigned char *tsupp = supp; |
| |
| for (j = 0; j < num_supp; j++, tsupp += 2) { |
| if (pref[0] == tsupp[0] && pref[1] == tsupp[1]) { |
| if (!tls_curve_allowed(s, pref, SSL_SECOP_CURVE_SHARED)) |
| continue; |
| if (nmatch == k) { |
| int id = (pref[0] << 8) | pref[1]; |
| |
| return tls1_ec_curve_id2nid(id, NULL); |
| } |
| k++; |
| } |
| } |
| } |
| if (nmatch == -1) |
| return k; |
| /* Out of range (nmatch > k). */ |
| return NID_undef; |
| } |
| |
| int tls1_set_groups(unsigned char **pext, size_t *pextlen, |
| int *groups, size_t ngroups) |
| { |
| unsigned char *glist, *p; |
| size_t i; |
| /* |
| * Bitmap of groups included to detect duplicates: only works while group |
| * ids < 32 |
| */ |
| unsigned long dup_list = 0; |
| glist = OPENSSL_malloc(ngroups * 2); |
| if (glist == NULL) |
| return 0; |
| for (i = 0, p = glist; i < ngroups; i++) { |
| unsigned long idmask; |
| int id; |
| /* TODO(TLS1.3): Convert for DH groups */ |
| id = tls1_ec_nid2curve_id(groups[i]); |
| idmask = 1L << id; |
| if (!id || (dup_list & idmask)) { |
| OPENSSL_free(glist); |
| return 0; |
| } |
| dup_list |= idmask; |
| s2n(id, p); |
| } |
| OPENSSL_free(*pext); |
| *pext = glist; |
| *pextlen = ngroups * 2; |
| return 1; |
| } |
| |
| # define MAX_CURVELIST 28 |
| |
| typedef struct { |
| size_t nidcnt; |
| int nid_arr[MAX_CURVELIST]; |
| } nid_cb_st; |
| |
| static int nid_cb(const char *elem, int len, void *arg) |
| { |
| nid_cb_st *narg = arg; |
| size_t i; |
| int nid; |
| char etmp[20]; |
| if (elem == NULL) |
| return 0; |
| if (narg->nidcnt == MAX_CURVELIST) |
| return 0; |
| if (len > (int)(sizeof(etmp) - 1)) |
| return 0; |
| memcpy(etmp, elem, len); |
| etmp[len] = 0; |
| nid = EC_curve_nist2nid(etmp); |
| if (nid == NID_undef) |
| nid = OBJ_sn2nid(etmp); |
| if (nid == NID_undef) |
| nid = OBJ_ln2nid(etmp); |
| if (nid == NID_undef) |
| return 0; |
| for (i = 0; i < narg->nidcnt; i++) |
| if (narg->nid_arr[i] == nid) |
| return 0; |
| narg->nid_arr[narg->nidcnt++] = nid; |
| return 1; |
| } |
| |
| /* Set groups based on a colon separate list */ |
| int tls1_set_groups_list(unsigned char **pext, size_t *pextlen, const char *str) |
| { |
| nid_cb_st ncb; |
| ncb.nidcnt = 0; |
| if (!CONF_parse_list(str, ':', 1, nid_cb, &ncb)) |
| return 0; |
| if (pext == NULL) |
| return 1; |
| return tls1_set_groups(pext, pextlen, ncb.nid_arr, ncb.nidcnt); |
| } |
| |
| /* For an EC key set TLS id and required compression based on parameters */ |
| static int tls1_set_ec_id(unsigned char *curve_id, unsigned char *comp_id, |
| EC_KEY *ec) |
| { |
| int id; |
| const EC_GROUP *grp; |
| if (!ec) |
| return 0; |
| /* Determine if it is a prime field */ |
| grp = EC_KEY_get0_group(ec); |
| if (!grp) |
| return 0; |
| /* Determine curve ID */ |
| id = EC_GROUP_get_curve_name(grp); |
| id = tls1_ec_nid2curve_id(id); |
| /* If no id return error: we don't support arbitrary explicit curves */ |
| if (id == 0) |
| return 0; |
| curve_id[0] = 0; |
| curve_id[1] = (unsigned char)id; |
| if (comp_id) { |
| if (EC_KEY_get0_public_key(ec) == NULL) |
| return 0; |
| if (EC_KEY_get_conv_form(ec) == POINT_CONVERSION_UNCOMPRESSED) { |
| *comp_id = TLSEXT_ECPOINTFORMAT_uncompressed; |
| } else { |
| if ((nid_list[id - 1].flags & TLS_CURVE_TYPE) == TLS_CURVE_PRIME) |
| *comp_id = TLSEXT_ECPOINTFORMAT_ansiX962_compressed_prime; |
| else |
| *comp_id = TLSEXT_ECPOINTFORMAT_ansiX962_compressed_char2; |
| } |
| } |
| return 1; |
| } |
| |
| /* Check an EC key is compatible with extensions */ |
| static int tls1_check_ec_key(SSL *s, |
| unsigned char *curve_id, unsigned char *comp_id) |
| { |
| const unsigned char *pformats, *pcurves; |
| size_t num_formats, num_curves, i; |
| int j; |
| /* |
| * If point formats extension present check it, otherwise everything is |
| * supported (see RFC4492). |
| */ |
| if (comp_id && s->session->ext.ecpointformats) { |
| pformats = s->session->ext.ecpointformats; |
| num_formats = s->session->ext.ecpointformats_len; |
| for (i = 0; i < num_formats; i++, pformats++) { |
| if (*comp_id == *pformats) |
| break; |
| } |
| if (i == num_formats) |
| return 0; |
| } |
| if (!curve_id) |
| return 1; |
| /* Check curve is consistent with client and server preferences */ |
| for (j = 0; j <= 1; j++) { |
| if (!tls1_get_curvelist(s, j, &pcurves, &num_curves)) |
| return 0; |
| if (j == 1 && num_curves == 0) { |
| /* |
| * If we've not received any curves then skip this check. |
| * RFC 4492 does not require the supported elliptic curves extension |
| * so if it is not sent we can just choose any curve. |
| * It is invalid to send an empty list in the elliptic curves |
| * extension, so num_curves == 0 always means no extension. |
| */ |
| break; |
| } |
| for (i = 0; i < num_curves; i++, pcurves += 2) { |
| if (pcurves[0] == curve_id[0] && pcurves[1] == curve_id[1]) |
| break; |
| } |
| if (i == num_curves) |
| return 0; |
| /* For clients can only check sent curve list */ |
| if (!s->server) |
| break; |
| } |
| return 1; |
| } |
| |
| void tls1_get_formatlist(SSL *s, const unsigned char **pformats, |
| size_t *num_formats) |
| { |
| /* |
| * If we have a custom point format list use it otherwise use default |
| */ |
| if (s->ext.ecpointformats) { |
| *pformats = s->ext.ecpointformats; |
| *num_formats = s->ext.ecpointformats_len; |
| } else { |
| *pformats = ecformats_default; |
| /* For Suite B we don't support char2 fields */ |
| if (tls1_suiteb(s)) |
| *num_formats = sizeof(ecformats_default) - 1; |
| else |
| *num_formats = sizeof(ecformats_default); |
| } |
| } |
| |
| /* |
| * Check cert parameters compatible with extensions: currently just checks EC |
| * certificates have compatible curves and compression. |
| */ |
| static int tls1_check_cert_param(SSL *s, X509 *x, int check_ee_md) |
| { |
| unsigned char comp_id, curve_id[2]; |
| EVP_PKEY *pkey; |
| int rv; |
| pkey = X509_get0_pubkey(x); |
| if (!pkey) |
| return 0; |
| /* If not EC nothing to do */ |
| if (EVP_PKEY_id(pkey) != EVP_PKEY_EC) |
| return 1; |
| rv = tls1_set_ec_id(curve_id, &comp_id, EVP_PKEY_get0_EC_KEY(pkey)); |
| if (!rv) |
| return 0; |
| /* |
| * Can't check curve_id for client certs as we don't have a supported |
| * curves extension. |
| */ |
| rv = tls1_check_ec_key(s, s->server ? curve_id : NULL, &comp_id); |
| if (!rv) |
| return 0; |
| /* |
| * Special case for suite B. We *MUST* sign using SHA256+P-256 or |
| * SHA384+P-384. |
| */ |
| if (check_ee_md && tls1_suiteb(s)) { |
| int check_md; |
| size_t i; |
| CERT *c = s->cert; |
| if (curve_id[0]) |
| return 0; |
| /* Check to see we have necessary signing algorithm */ |
| if (curve_id[1] == TLSEXT_curve_P_256) |
| check_md = NID_ecdsa_with_SHA256; |
| else if (curve_id[1] == TLSEXT_curve_P_384) |
| check_md = NID_ecdsa_with_SHA384; |
| else |
| return 0; /* Should never happen */ |
| for (i = 0; i < c->shared_sigalgslen; i++) |
| if (check_md == c->shared_sigalgs[i]->sigandhash) |
| break; |
| if (i == c->shared_sigalgslen) |
| return 0; |
| } |
| return rv; |
| } |
| |
| # ifndef OPENSSL_NO_EC |
| /* |
| * tls1_check_ec_tmp_key - Check EC temporary key compatibility |
| * @s: SSL connection |
| * @cid: Cipher ID we're considering using |
| * |
| * Checks that the kECDHE cipher suite we're considering using |
| * is compatible with the client extensions. |
| * |
| * Returns 0 when the cipher can't be used or 1 when it can. |
| */ |
| int tls1_check_ec_tmp_key(SSL *s, unsigned long cid) |
| { |
| /* |
| * If Suite B, AES128 MUST use P-256 and AES256 MUST use P-384, no other |
| * curves permitted. |
| */ |
| if (tls1_suiteb(s)) { |
| unsigned char curve_id[2]; |
| /* Curve to check determined by ciphersuite */ |
| if (cid == TLS1_CK_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256) |
| curve_id[1] = TLSEXT_curve_P_256; |
| else if (cid == TLS1_CK_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384) |
| curve_id[1] = TLSEXT_curve_P_384; |
| else |
| return 0; |
| curve_id[0] = 0; |
| /* Check this curve is acceptable */ |
| if (!tls1_check_ec_key(s, curve_id, NULL)) |
| return 0; |
| return 1; |
| } |
| /* Need a shared curve */ |
| if (tls1_shared_group(s, 0)) |
| return 1; |
| return 0; |
| } |
| # endif /* OPENSSL_NO_EC */ |
| |
| #else |
| |
| static int tls1_check_cert_param(SSL *s, X509 *x, int set_ee_md) |
| { |
| return 1; |
| } |
| |
| #endif /* OPENSSL_NO_EC */ |
| |
| /* Default sigalg schemes */ |
| static const uint16_t tls12_sigalgs[] = { |
| #ifndef OPENSSL_NO_EC |
| TLSEXT_SIGALG_ecdsa_secp256r1_sha256, |
| TLSEXT_SIGALG_ecdsa_secp384r1_sha384, |
| TLSEXT_SIGALG_ecdsa_secp521r1_sha512, |
| #endif |
| |
| TLSEXT_SIGALG_rsa_pss_sha256, |
| TLSEXT_SIGALG_rsa_pss_sha384, |
| TLSEXT_SIGALG_rsa_pss_sha512, |
| |
| TLSEXT_SIGALG_rsa_pkcs1_sha256, |
| TLSEXT_SIGALG_rsa_pkcs1_sha384, |
| TLSEXT_SIGALG_rsa_pkcs1_sha512, |
| |
| #ifndef OPENSSL_NO_EC |
| TLSEXT_SIGALG_ecdsa_sha1, |
| #endif |
| TLSEXT_SIGALG_rsa_pkcs1_sha1, |
| #ifndef OPENSSL_NO_DSA |
| TLSEXT_SIGALG_dsa_sha1, |
| |
| TLSEXT_SIGALG_dsa_sha256, |
| TLSEXT_SIGALG_dsa_sha384, |
| TLSEXT_SIGALG_dsa_sha512 |
| #endif |
| }; |
| |
| #ifndef OPENSSL_NO_EC |
| static const uint16_t suiteb_sigalgs[] = { |
| TLSEXT_SIGALG_ecdsa_secp256r1_sha256, |
| TLSEXT_SIGALG_ecdsa_secp384r1_sha384 |
| }; |
| #endif |
| |
| static const SIGALG_LOOKUP sigalg_lookup_tbl[] = { |
| #ifndef OPENSSL_NO_EC |
| {"ecdsa_secp256r1_sha256", TLSEXT_SIGALG_ecdsa_secp256r1_sha256, |
| NID_sha256, SSL_MD_SHA256_IDX, EVP_PKEY_EC, SSL_PKEY_ECC, |
| NID_ecdsa_with_SHA256, NID_X9_62_prime256v1}, |
| {"ecdsa_secp384r1_sha384", TLSEXT_SIGALG_ecdsa_secp384r1_sha384, |
| NID_sha384, SSL_MD_SHA384_IDX, EVP_PKEY_EC, SSL_PKEY_ECC, |
| NID_ecdsa_with_SHA384, NID_secp384r1}, |
| {"ecdsa_secp521r1_sha512", TLSEXT_SIGALG_ecdsa_secp521r1_sha512, |
| NID_sha512, SSL_MD_SHA512_IDX, EVP_PKEY_EC, SSL_PKEY_ECC, |
| NID_ecdsa_with_SHA512, NID_secp521r1}, |
| {NULL, TLSEXT_SIGALG_ecdsa_sha1, |
| NID_sha1, SSL_MD_SHA1_IDX, EVP_PKEY_EC, SSL_PKEY_ECC, |
| NID_ecdsa_with_SHA1, NID_undef}, |
| #endif |
| {"rsa_pss_sha256", TLSEXT_SIGALG_rsa_pss_sha256, |
| NID_sha256, SSL_MD_SHA256_IDX, EVP_PKEY_RSA_PSS, SSL_PKEY_RSA_PSS_SIGN, |
| NID_undef, NID_undef}, |
| {"rsa_pss_sha384", TLSEXT_SIGALG_rsa_pss_sha384, |
| NID_sha384, SSL_MD_SHA384_IDX, EVP_PKEY_RSA_PSS, SSL_PKEY_RSA_PSS_SIGN, |
| NID_undef, NID_undef}, |
| {"rsa_pss_sha512", TLSEXT_SIGALG_rsa_pss_sha512, |
| NID_sha512, SSL_MD_SHA512_IDX, EVP_PKEY_RSA_PSS, SSL_PKEY_RSA_PSS_SIGN, |
| NID_undef, NID_undef}, |
| {"rsa_pkcs1_sha256", TLSEXT_SIGALG_rsa_pkcs1_sha256, |
| NID_sha256, SSL_MD_SHA256_IDX, EVP_PKEY_RSA, SSL_PKEY_RSA, |
| NID_sha256WithRSAEncryption, NID_undef}, |
| {"rsa_pkcs1_sha384", TLSEXT_SIGALG_rsa_pkcs1_sha384, |
| NID_sha384, SSL_MD_SHA384_IDX, EVP_PKEY_RSA, SSL_PKEY_RSA, |
| NID_sha384WithRSAEncryption, NID_undef}, |
| {"rsa_pkcs1_sha512", TLSEXT_SIGALG_rsa_pkcs1_sha512, |
| NID_sha512, SSL_MD_SHA512_IDX, EVP_PKEY_RSA, SSL_PKEY_RSA, |
| NID_sha512WithRSAEncryption, NID_undef}, |
| {"rsa_pkcs1_sha1", TLSEXT_SIGALG_rsa_pkcs1_sha1, |
| NID_sha1, SSL_MD_SHA1_IDX, EVP_PKEY_RSA, SSL_PKEY_RSA, |
| NID_sha1WithRSAEncryption, NID_undef}, |
| #ifndef OPENSSL_NO_DSA |
| {NULL, TLSEXT_SIGALG_dsa_sha256, |
| NID_sha256, SSL_MD_SHA256_IDX, EVP_PKEY_DSA, SSL_PKEY_DSA_SIGN, |
| NID_dsa_with_SHA256, NID_undef}, |
| {NULL, TLSEXT_SIGALG_dsa_sha384, |
| NID_sha384, SSL_MD_SHA384_IDX, EVP_PKEY_DSA, SSL_PKEY_DSA_SIGN, |
| NID_undef, NID_undef}, |
| {NULL, TLSEXT_SIGALG_dsa_sha512, |
| NID_sha512, SSL_MD_SHA512_IDX, EVP_PKEY_DSA, SSL_PKEY_DSA_SIGN, |
| NID_undef, NID_undef}, |
| {NULL, TLSEXT_SIGALG_dsa_sha1, |
| NID_sha1, SSL_MD_SHA1_IDX, EVP_PKEY_DSA, SSL_PKEY_DSA_SIGN, |
| NID_dsaWithSHA1, NID_undef}, |
| #endif |
| #ifndef OPENSSL_NO_GOST |
| {NULL, TLSEXT_SIGALG_gostr34102012_256_gostr34112012_256, |
| NID_id_GostR3411_2012_256, SSL_MD_GOST12_256_IDX, |
| NID_id_GostR3410_2012_256, SSL_PKEY_GOST12_256, |
| NID_undef, NID_undef}, |
| {NULL, TLSEXT_SIGALG_gostr34102012_512_gostr34112012_512, |
| NID_id_GostR3411_2012_512, SSL_MD_GOST12_512_IDX, |
| NID_id_GostR3410_2012_512, SSL_PKEY_GOST12_512, |
| NID_undef, NID_undef}, |
| {NULL, TLSEXT_SIGALG_gostr34102001_gostr3411, |
| NID_id_GostR3411_94, SSL_MD_GOST94_IDX, |
| NID_id_GostR3410_2001, SSL_PKEY_GOST01, |
| NID_undef, NID_undef} |
| #endif |
| }; |
| /* Legacy sigalgs for TLS < 1.2 RSA TLS signatures */ |
| static const SIGALG_LOOKUP legacy_rsa_sigalg = { |
| "rsa_pkcs1_md5_sha1", 0, |
| NID_md5_sha1, SSL_MD_MD5_SHA1_IDX, |
| EVP_PKEY_RSA, SSL_PKEY_RSA, |
| NID_undef, NID_undef |
| }; |
| |
| /* |
| * Default signature algorithm values used if signature algorithms not present. |
| * From RFC5246. Note: order must match certificate index order. |
| */ |
| static const uint16_t tls_default_sigalg[] = { |
| TLSEXT_SIGALG_rsa_pkcs1_sha1, /* SSL_PKEY_RSA */ |
| TLSEXT_SIGALG_dsa_sha1, /* SSL_PKEY_DSA_SIGN */ |
| TLSEXT_SIGALG_ecdsa_sha1, /* SSL_PKEY_ECC */ |
| TLSEXT_SIGALG_gostr34102001_gostr3411, /* SSL_PKEY_GOST01 */ |
| TLSEXT_SIGALG_gostr34102012_256_gostr34112012_256, /* SSL_PKEY_GOST12_256 */ |
| TLSEXT_SIGALG_gostr34102012_512_gostr34112012_512 /* SSL_PKEY_GOST12_512 */ |
| }; |
| |
| /* Lookup TLS signature algorithm */ |
| static const SIGALG_LOOKUP *tls1_lookup_sigalg(uint16_t sigalg) |
| { |
| size_t i; |
| const SIGALG_LOOKUP *s; |
| |
| for (i = 0, s = sigalg_lookup_tbl; i < OSSL_NELEM(sigalg_lookup_tbl); |
| i++, s++) { |
| if (s->sigalg == sigalg) |
| return s; |
| } |
| return NULL; |
| } |
| /* |
| * Return a signature algorithm for TLS < 1.2 where the signature type |
| * is fixed by the certificate type. |
| */ |
| static const SIGALG_LOOKUP *tls1_get_legacy_sigalg(const SSL *s, int idx) |
| { |
| if (idx < 0 || idx >= (int)OSSL_NELEM(tls_default_sigalg)) |
| return NULL; |
| if (SSL_USE_SIGALGS(s) || idx != SSL_PKEY_RSA) { |
| const SIGALG_LOOKUP *lu = tls1_lookup_sigalg(tls_default_sigalg[idx]); |
| |
| if (lu == NULL || ssl_md(lu->hash_idx) == NULL) { |
| return NULL; |
| } |
| return lu; |
| } |
| return &legacy_rsa_sigalg; |
| } |
| /* Set peer sigalg based key type */ |
| int tls1_set_peer_legacy_sigalg(SSL *s, const EVP_PKEY *pkey) |
| { |
| int idx = ssl_cert_type(NULL, pkey); |
| |
| const SIGALG_LOOKUP *lu = tls1_get_legacy_sigalg(s, idx); |
| if (lu == NULL) |
| return 0; |
| s->s3->tmp.peer_sigalg = lu; |
| return 1; |
| } |
| |
| static int tls_sigalg_get_sig(uint16_t sigalg) |
| { |
| const SIGALG_LOOKUP *r = tls1_lookup_sigalg(sigalg); |
| |
| return r != NULL ? r->sig : 0; |
| } |
| |
| size_t tls12_get_psigalgs(SSL *s, int sent, const uint16_t **psigs) |
| { |
| /* |
| * If Suite B mode use Suite B sigalgs only, ignore any other |
| * preferences. |
| */ |
| #ifndef OPENSSL_NO_EC |
| switch (tls1_suiteb(s)) { |
| case SSL_CERT_FLAG_SUITEB_128_LOS: |
| *psigs = suiteb_sigalgs; |
| return OSSL_NELEM(suiteb_sigalgs); |
| |
| case SSL_CERT_FLAG_SUITEB_128_LOS_ONLY: |
| *psigs = suiteb_sigalgs; |
| return 1; |
| |
| case SSL_CERT_FLAG_SUITEB_192_LOS: |
| *psigs = suiteb_sigalgs + 1; |
| return 1; |
| } |
| #endif |
| /* |
| * We use client_sigalgs (if not NULL) if we're a server |
| * and sending a certificate request or if we're a client and |
| * determining which shared algorithm to use. |
| */ |
| if ((s->server == sent) && s->cert->client_sigalgs != NULL) { |
| *psigs = s->cert->client_sigalgs; |
| return s->cert->client_sigalgslen; |
| } else if (s->cert->conf_sigalgs) { |
| *psigs = s->cert->conf_sigalgs; |
| return s->cert->conf_sigalgslen; |
| } else { |
| *psigs = tls12_sigalgs; |
| return OSSL_NELEM(tls12_sigalgs); |
| } |
| } |
| |
| /* |
| * Check signature algorithm is consistent with sent supported signature |
| * algorithms and if so set relevant digest and signature scheme in |
| * s. |
| */ |
| int tls12_check_peer_sigalg(SSL *s, uint16_t sig, EVP_PKEY *pkey) |
| { |
| const uint16_t *sent_sigs; |
| const EVP_MD *md = NULL; |
| char sigalgstr[2]; |
| size_t sent_sigslen, i; |
| int pkeyid = EVP_PKEY_id(pkey); |
| const SIGALG_LOOKUP *lu; |
| |
| /* Should never happen */ |
| if (pkeyid == -1) |
| return -1; |
| if (SSL_IS_TLS13(s)) { |
| /* Disallow DSA for TLS 1.3 */ |
| if (pkeyid == EVP_PKEY_DSA) { |
| SSLerr(SSL_F_TLS12_CHECK_PEER_SIGALG, SSL_R_WRONG_SIGNATURE_TYPE); |
| return 0; |
| } |
| /* Only allow PSS for TLS 1.3 */ |
| if (pkeyid == EVP_PKEY_RSA) |
| pkeyid = EVP_PKEY_RSA_PSS; |
| } |
| lu = tls1_lookup_sigalg(sig); |
| /* |
| * Check sigalgs is known. Disallow SHA1 with TLS 1.3. Check key type is |
| * consistent with signature: RSA keys can be used for RSA-PSS |
| */ |
| if (lu == NULL || (SSL_IS_TLS13(s) && lu->hash == NID_sha1) |
| || (pkeyid != lu->sig |
| && (lu->sig != EVP_PKEY_RSA_PSS || pkeyid != EVP_PKEY_RSA))) { |
| SSLerr(SSL_F_TLS12_CHECK_PEER_SIGALG, SSL_R_WRONG_SIGNATURE_TYPE); |
| return 0; |
| } |
| #ifndef OPENSSL_NO_EC |
| if (pkeyid == EVP_PKEY_EC) { |
| EC_KEY *ec = EVP_PKEY_get0_EC_KEY(pkey); |
| int curve = EC_GROUP_get_curve_name(EC_KEY_get0_group(ec)); |
| |
| if (SSL_IS_TLS13(s)) { |
| if (EC_KEY_get_conv_form(ec) != POINT_CONVERSION_UNCOMPRESSED) { |
| SSLerr(SSL_F_TLS12_CHECK_PEER_SIGALG, |
| SSL_R_ILLEGAL_POINT_COMPRESSION); |
| return 0; |
| } |
| /* For TLS 1.3 check curve matches signature algorithm */ |
| if (lu->curve != NID_undef && curve != lu->curve) { |
| SSLerr(SSL_F_TLS12_CHECK_PEER_SIGALG, SSL_R_WRONG_CURVE); |
| return 0; |
| } |
| } else { |
| unsigned char curve_id[2], comp_id; |
| |
| /* Check compression and curve matches extensions */ |
| if (!tls1_set_ec_id(curve_id, &comp_id, ec)) |
| return 0; |
| if (!s->server && !tls1_check_ec_key(s, curve_id, &comp_id)) { |
| SSLerr(SSL_F_TLS12_CHECK_PEER_SIGALG, SSL_R_WRONG_CURVE); |
| return 0; |
| } |
| if (tls1_suiteb(s)) { |
| /* Check sigalg matches a permissible Suite B value */ |
| if (sig != TLSEXT_SIGALG_ecdsa_secp256r1_sha256 |
| && sig != TLSEXT_SIGALG_ecdsa_secp384r1_sha384) { |
| SSLerr(SSL_F_TLS12_CHECK_PEER_SIGALG, |
| SSL_R_WRONG_SIGNATURE_TYPE); |
| return 0; |
| } |
| /* |
| * Suite B also requires P-256+SHA256 and P-384+SHA384: |
| * this matches the TLS 1.3 requirements so we can just |
| * check the curve is the expected TLS 1.3 value. |
| * If this fails an inappropriate digest is being used. |
| */ |
| if (curve != lu->curve) { |
| SSLerr(SSL_F_TLS12_CHECK_PEER_SIGALG, |
| SSL_R_ILLEGAL_SUITEB_DIGEST); |
| return 0; |
| } |
| } |
| } |
| } else if (tls1_suiteb(s)) { |
| return 0; |
| } |
| #endif |
| |
| /* Check signature matches a type we sent */ |
| sent_sigslen = tls12_get_psigalgs(s, 1, &sent_sigs); |
| for (i = 0; i < sent_sigslen; i++, sent_sigs++) { |
| if (sig == *sent_sigs) |
| break; |
| } |
| /* Allow fallback to SHA1 if not strict mode */ |
| if (i == sent_sigslen && (lu->hash != NID_sha1 |
| || s->cert->cert_flags & SSL_CERT_FLAGS_CHECK_TLS_STRICT)) { |
| SSLerr(SSL_F_TLS12_CHECK_PEER_SIGALG, SSL_R_WRONG_SIGNATURE_TYPE); |
| return 0; |
| } |
| md = ssl_md(lu->hash_idx); |
| if (md == NULL) { |
| SSLerr(SSL_F_TLS12_CHECK_PEER_SIGALG, SSL_R_UNKNOWN_DIGEST); |
| return 0; |
| } |
| /* |
| * Make sure security callback allows algorithm. For historical reasons we |
| * have to pass the sigalg as a two byte char array. |
| */ |
| sigalgstr[0] = (sig >> 8) & 0xff; |
| sigalgstr[1] = sig & 0xff; |
| if (!ssl_security(s, SSL_SECOP_SIGALG_CHECK, |
| EVP_MD_size(md) * 4, EVP_MD_type(md), |
| (void *)sigalgstr)) { |
| SSLerr(SSL_F_TLS12_CHECK_PEER_SIGALG, SSL_R_WRONG_SIGNATURE_TYPE); |
| return 0; |
| } |
| /* Store the sigalg the peer uses */ |
| s->s3->tmp.peer_sigalg = lu; |
| return 1; |
| } |
| |
| int SSL_get_peer_signature_type_nid(const SSL *s, int *pnid) |
| { |
| if (s->s3->tmp.peer_sigalg == NULL) |
| return 0; |
| *pnid = s->s3->tmp.peer_sigalg->sig; |
| return 1; |
| } |
| |
| /* |
| * Set a mask of disabled algorithms: an algorithm is disabled if it isn't |
| * supported, doesn't appear in supported signature algorithms, isn't supported |
| * by the enabled protocol versions or by the security level. |
| * |
| * This function should only be used for checking which ciphers are supported |
| * by the client. |
| * |
| * Call ssl_cipher_disabled() to check that it's enabled or not. |
| */ |
| void ssl_set_client_disabled(SSL *s) |
| { |
| s->s3->tmp.mask_a = 0; |
| s->s3->tmp.mask_k = 0; |
| ssl_set_sig_mask(&s->s3->tmp.mask_a, s, SSL_SECOP_SIGALG_MASK); |
| ssl_get_client_min_max_version(s, &s->s3->tmp.min_ver, &s->s3->tmp.max_ver); |
| #ifndef OPENSSL_NO_PSK |
| /* with PSK there must be client callback set */ |
| if (!s->psk_client_callback) { |
| s->s3->tmp.mask_a |= SSL_aPSK; |
| s->s3->tmp.mask_k |= SSL_PSK; |
| } |
| #endif /* OPENSSL_NO_PSK */ |
| #ifndef OPENSSL_NO_SRP |
| if (!(s->srp_ctx.srp_Mask & SSL_kSRP)) { |
| s->s3->tmp.mask_a |= SSL_aSRP; |
| s->s3->tmp.mask_k |= SSL_kSRP; |
| } |
| #endif |
| } |
| |
| /* |
| * ssl_cipher_disabled - check that a cipher is disabled or not |
| * @s: SSL connection that you want to use the cipher on |
| * @c: cipher to check |
| * @op: Security check that you want to do |
| * |
| * Returns 1 when it's disabled, 0 when enabled. |
| */ |
| int ssl_cipher_disabled(SSL *s, const SSL_CIPHER *c, int op) |
| { |
| if (c->algorithm_mkey & s->s3->tmp.mask_k |
| || c->algorithm_auth & s->s3->tmp.mask_a) |
| return 1; |
| if (s->s3->tmp.max_ver == 0) |
| return 1; |
| if (!SSL_IS_DTLS(s) && ((c->min_tls > s->s3->tmp.max_ver) |
| || (c->max_tls < s->s3->tmp.min_ver))) |
| return 1; |
| if (SSL_IS_DTLS(s) && (DTLS_VERSION_GT(c->min_dtls, s->s3->tmp.max_ver) |
| || DTLS_VERSION_LT(c->max_dtls, s->s3->tmp.min_ver))) |
| return 1; |
| |
| return !ssl_security(s, op, c->strength_bits, 0, (void *)c); |
| } |
| |
| int tls_use_ticket(SSL *s) |
| { |
| if ((s->options & SSL_OP_NO_TICKET)) |
| return 0; |
| return ssl_security(s, SSL_SECOP_TICKET, 0, 0, NULL); |
| } |
| |
| int tls1_set_server_sigalgs(SSL *s) |
| { |
| int al; |
| size_t i; |
| |
| /* Clear any shared signature algorithms */ |
| OPENSSL_free(s->cert->shared_sigalgs); |
| s->cert->shared_sigalgs = NULL; |
| s->cert->shared_sigalgslen = 0; |
| /* Clear certificate validity flags */ |
| for (i = 0; i < SSL_PKEY_NUM; i++) |
| s->s3->tmp.valid_flags[i] = 0; |
| /* |
| * If peer sent no signature algorithms check to see if we support |
| * the default algorithm for each certificate type |
| */ |
| if (s->s3->tmp.peer_sigalgs == NULL) { |
| const uint16_t *sent_sigs; |
| size_t sent_sigslen = tls12_get_psigalgs(s, 1, &sent_sigs); |
| |
| for (i = 0; i < SSL_PKEY_NUM; i++) { |
| const SIGALG_LOOKUP *lu = tls1_get_legacy_sigalg(s, i); |
| size_t j; |
| |
| if (lu == NULL) |
| continue; |
| /* Check default matches a type we sent */ |
| for (j = 0; j < sent_sigslen; j++) { |
| if (lu->sigalg == sent_sigs[j]) { |
| s->s3->tmp.valid_flags[i] = CERT_PKEY_SIGN; |
| break; |
| } |
| } |
| } |
| return 1; |
| } |
| |
| if (!tls1_process_sigalgs(s)) { |
| SSLerr(SSL_F_TLS1_SET_SERVER_SIGALGS, ERR_R_MALLOC_FAILURE); |
| al = SSL_AD_INTERNAL_ERROR; |
| goto err; |
| } |
| if (s->cert->shared_sigalgs != NULL) |
| return 1; |
| /* Fatal error is no shared signature algorithms */ |
| SSLerr(SSL_F_TLS1_SET_SERVER_SIGALGS, SSL_R_NO_SHARED_SIGNATURE_ALGORITHMS); |
| al = SSL_AD_ILLEGAL_PARAMETER; |
| err: |
| ssl3_send_alert(s, SSL3_AL_FATAL, al); |
| return 0; |
| } |
| |
| /*- |
| * Gets the ticket information supplied by the client if any. |
| * |
| * hello: The parsed ClientHello data |
| * ret: (output) on return, if a ticket was decrypted, then this is set to |
| * point to the resulting session. |
| * |
| * If s->tls_session_secret_cb is set then we are expecting a pre-shared key |
| * ciphersuite, in which case we have no use for session tickets and one will |
| * never be decrypted, nor will s->ext.ticket_expected be set to 1. |
| * |
| * Returns: |
| * -1: fatal error, either from parsing or decrypting the ticket. |
| * 0: no ticket was found (or was ignored, based on settings). |
| * 1: a zero length extension was found, indicating that the client supports |
| * session tickets but doesn't currently have one to offer. |
| * 2: either s->tls_session_secret_cb was set, or a ticket was offered but |
| * couldn't be decrypted because of a non-fatal error. |
| * 3: a ticket was successfully decrypted and *ret was set. |
| * |
| * Side effects: |
| * Sets s->ext.ticket_expected to 1 if the server will have to issue |
| * a new session ticket to the client because the client indicated support |
| * (and s->tls_session_secret_cb is NULL) but the client either doesn't have |
| * a session ticket or we couldn't use the one it gave us, or if |
| * s->ctx->ext.ticket_key_cb asked to renew the client's ticket. |
| * Otherwise, s->ext.ticket_expected is set to 0. |
| */ |
| TICKET_RETURN tls_get_ticket_from_client(SSL *s, CLIENTHELLO_MSG *hello, |
| SSL_SESSION **ret) |
| { |
| int retv; |
| size_t size; |
| RAW_EXTENSION *ticketext; |
| |
| *ret = NULL; |
| s->ext.ticket_expected = 0; |
| |
| /* |
| * If tickets disabled or not supported by the protocol version |
| * (e.g. TLSv1.3) behave as if no ticket present to permit stateful |
| * resumption. |
| */ |
| if (s->version <= SSL3_VERSION || !tls_use_ticket(s)) |
| return TICKET_NONE; |
| |
| ticketext = &hello->pre_proc_exts[TLSEXT_IDX_session_ticket]; |
| if (!ticketext->present) |
| return TICKET_NONE; |
| |
| size = PACKET_remaining(&ticketext->data); |
| if (size == 0) { |
| /* |
| * The client will accept a ticket but doesn't currently have |
| * one. |
| */ |
| s->ext.ticket_expected = 1; |
| return TICKET_EMPTY; |
| } |
| if (s->ext.session_secret_cb) { |
| /* |
| * Indicate that the ticket couldn't be decrypted rather than |
| * generating the session from ticket now, trigger |
| * abbreviated handshake based on external mechanism to |
| * calculate the master secret later. |
| */ |
| return TICKET_NO_DECRYPT; |
| } |
| |
| retv = tls_decrypt_ticket(s, PACKET_data(&ticketext->data), size, |
| hello->session_id, hello->session_id_len, ret); |
| switch (retv) { |
| case TICKET_NO_DECRYPT: |
| s->ext.ticket_expected = 1; |
| return TICKET_NO_DECRYPT; |
| |
| case TICKET_SUCCESS: |
| return TICKET_SUCCESS; |
| |
| case TICKET_SUCCESS_RENEW: |
| s->ext.ticket_expected = 1; |
| return TICKET_SUCCESS; |
| |
| default: |
| return TICKET_FATAL_ERR_OTHER; |
| } |
| } |
| |
| /*- |
| * tls_decrypt_ticket attempts to decrypt a session ticket. |
| * |
| * etick: points to the body of the session ticket extension. |
| * eticklen: the length of the session tickets extension. |
| * sess_id: points at the session ID. |
| * sesslen: the length of the session ID. |
| * psess: (output) on return, if a ticket was decrypted, then this is set to |
| * point to the resulting session. |
| */ |
| TICKET_RETURN tls_decrypt_ticket(SSL *s, const unsigned char *etick, |
| size_t eticklen, const unsigned char *sess_id, |
| size_t sesslen, SSL_SESSION **psess) |
| { |
| SSL_SESSION *sess; |
| unsigned char *sdec; |
| const unsigned char *p; |
| int slen, renew_ticket = 0, declen; |
| TICKET_RETURN ret = TICKET_FATAL_ERR_OTHER; |
| size_t mlen; |
| unsigned char tick_hmac[EVP_MAX_MD_SIZE]; |
| HMAC_CTX *hctx = NULL; |
| EVP_CIPHER_CTX *ctx; |
| SSL_CTX *tctx = s->session_ctx; |
| |
| /* Initialize session ticket encryption and HMAC contexts */ |
| hctx = HMAC_CTX_new(); |
| if (hctx == NULL) |
| return TICKET_FATAL_ERR_MALLOC; |
| ctx = EVP_CIPHER_CTX_new(); |
| if (ctx == NULL) { |
| ret = TICKET_FATAL_ERR_MALLOC; |
| goto err; |
| } |
| if (tctx->ext.ticket_key_cb) { |
| unsigned char *nctick = (unsigned char *)etick; |
| int rv = tctx->ext.ticket_key_cb(s, nctick, nctick + 16, |
| ctx, hctx, 0); |
| if (rv < 0) |
| goto err; |
| if (rv == 0) { |
| ret = TICKET_NO_DECRYPT; |
| goto err; |
| } |
| if (rv == 2) |
| renew_ticket = 1; |
| } else { |
| /* Check key name matches */ |
| if (memcmp(etick, tctx->ext.tick_key_name, |
| sizeof(tctx->ext.tick_key_name)) != 0) { |
| ret = TICKET_NO_DECRYPT; |
| goto err; |
| } |
| if (HMAC_Init_ex(hctx, tctx->ext.tick_hmac_key, |
| sizeof(tctx->ext.tick_hmac_key), |
| EVP_sha256(), NULL) <= 0 |
| || EVP_DecryptInit_ex(ctx, EVP_aes_256_cbc(), NULL, |
| tctx->ext.tick_aes_key, |
| etick |
| + sizeof(tctx->ext.tick_key_name)) <= 0) { |
| goto err; |
| } |
| } |
| /* |
| * Attempt to process session ticket, first conduct sanity and integrity |
| * checks on ticket. |
| */ |
| mlen = HMAC_size(hctx); |
| if (mlen == 0) { |
| goto err; |
| } |
| /* Sanity check ticket length: must exceed keyname + IV + HMAC */ |
| if (eticklen <= |
| TLSEXT_KEYNAME_LENGTH + EVP_CIPHER_CTX_iv_length(ctx) + mlen) { |
| ret = TICKET_NO_DECRYPT; |
| goto err; |
| } |
| eticklen -= mlen; |
| /* Check HMAC of encrypted ticket */ |
| if (HMAC_Update(hctx, etick, eticklen) <= 0 |
| || HMAC_Final(hctx, tick_hmac, NULL) <= 0) { |
| goto err; |
| } |
| HMAC_CTX_free(hctx); |
| if (CRYPTO_memcmp(tick_hmac, etick + eticklen, mlen)) { |
| EVP_CIPHER_CTX_free(ctx); |
| return TICKET_NO_DECRYPT; |
| } |
| /* Attempt to decrypt session data */ |
| /* Move p after IV to start of encrypted ticket, update length */ |
| p = etick + TLSEXT_KEYNAME_LENGTH + EVP_CIPHER_CTX_iv_length(ctx); |
| eticklen -= TLSEXT_KEYNAME_LENGTH + EVP_CIPHER_CTX_iv_length(ctx); |
| sdec = OPENSSL_malloc(eticklen); |
| if (sdec == NULL || EVP_DecryptUpdate(ctx, sdec, &slen, p, |
| (int)eticklen) <= 0) { |
| EVP_CIPHER_CTX_free(ctx); |
| OPENSSL_free(sdec); |
| return TICKET_FATAL_ERR_OTHER; |
| } |
| if (EVP_DecryptFinal(ctx, sdec + slen, &declen) <= 0) { |
| EVP_CIPHER_CTX_free(ctx); |
| OPENSSL_free(sdec); |
| return TICKET_NO_DECRYPT; |
| } |
| slen += declen; |
| EVP_CIPHER_CTX_free(ctx); |
| ctx = NULL; |
| p = sdec; |
| |
| sess = d2i_SSL_SESSION(NULL, &p, slen); |
| OPENSSL_free(sdec); |
| if (sess) { |
| /* Some additional consistency checks */ |
| if (p != sdec + slen || sess->session_id_length != 0) { |
| SSL_SESSION_free(sess); |
| return 2; |
| } |
| /* |
| * The session ID, if non-empty, is used by some clients to detect |
| * that the ticket has been accepted. So we copy it to the session |
| * structure. If it is empty set length to zero as required by |
| * standard. |
| */ |
| if (sesslen) |
| memcpy(sess->session_id, sess_id, sesslen); |
| sess->session_id_length = sesslen; |
| *psess = sess; |
| if (renew_ticket) |
| return TICKET_SUCCESS_RENEW; |
| else |
| return TICKET_SUCCESS; |
| } |
| ERR_clear_error(); |
| /* |
| * For session parse failure, indicate that we need to send a new ticket. |
| */ |
| return TICKET_NO_DECRYPT; |
| err: |
| EVP_CIPHER_CTX_free(ctx); |
| HMAC_CTX_free(hctx); |
| return ret; |
| } |
| |
| static int tls12_get_pkey_idx(int sig_nid) |
| { |
| switch (sig_nid) { |
| #ifndef OPENSSL_NO_RSA |
| case EVP_PKEY_RSA: |
| return SSL_PKEY_RSA; |
| /* |
| * For now return RSA key for PSS. When we support PSS only keys |
| * this will need to be updated. |
| */ |
| case EVP_PKEY_RSA_PSS: |
| return SSL_PKEY_RSA; |
| #endif |
| #ifndef OPENSSL_NO_DSA |
| case EVP_PKEY_DSA: |
| return SSL_PKEY_DSA_SIGN; |
| #endif |
| #ifndef OPENSSL_NO_EC |
| case EVP_PKEY_EC: |
| return SSL_PKEY_ECC; |
| #endif |
| #ifndef OPENSSL_NO_GOST |
| case NID_id_GostR3410_2001: |
| return SSL_PKEY_GOST01; |
| |
| case NID_id_GostR3410_2012_256: |
| return SSL_PKEY_GOST12_256; |
| |
| case NID_id_GostR3410_2012_512: |
| return SSL_PKEY_GOST12_512; |
| #endif |
| } |
| return -1; |
| } |
| |
| /* Check to see if a signature algorithm is allowed */ |
| static int tls12_sigalg_allowed(SSL *s, int op, uint16_t ptmp) |
| { |
| const SIGALG_LOOKUP *lu = tls1_lookup_sigalg(ptmp); |
| unsigned char sigalgstr[2]; |
| int secbits; |
| |
| /* See if sigalgs is recognised and if hash is enabled */ |
| if (lu == NULL || ssl_md(lu->hash_idx) == NULL) |
| return 0; |
| /* See if public key algorithm allowed */ |
| if (tls12_get_pkey_idx(lu->sig) == -1) |
| return 0; |
| /* Security bits: half digest bits */ |
| secbits = EVP_MD_size(ssl_md(lu->hash_idx)) * 4; |
| /* Finally see if security callback allows it */ |
| sigalgstr[0] = (ptmp >> 8) & 0xff; |
| sigalgstr[1] = ptmp & 0xff; |
| return ssl_security(s, op, secbits, lu->hash, (void *)sigalgstr); |
| } |
| |
| /* |
| * Get a mask of disabled public key algorithms based on supported signature |
| * algorithms. For example if no signature algorithm supports RSA then RSA is |
| * disabled. |
| */ |
| |
| void ssl_set_sig_mask(uint32_t *pmask_a, SSL *s, int op) |
| { |
| const uint16_t *sigalgs; |
| size_t i, sigalgslen; |
| int have_rsa = 0, have_dsa = 0, have_ecdsa = 0; |
| /* |
| * Now go through all signature algorithms seeing if we support any for |
| * RSA, DSA, ECDSA. Do this for all versions not just TLS 1.2. To keep |
| * down calls to security callback only check if we have to. |
| */ |
| sigalgslen = tls12_get_psigalgs(s, 1, &sigalgs); |
| for (i = 0; i < sigalgslen; i ++, sigalgs++) { |
| switch (tls_sigalg_get_sig(*sigalgs)) { |
| #ifndef OPENSSL_NO_RSA |
| /* Any RSA-PSS signature algorithms also mean we allow RSA */ |
| case EVP_PKEY_RSA_PSS: |
| case EVP_PKEY_RSA: |
| if (!have_rsa && tls12_sigalg_allowed(s, op, *sigalgs)) |
| have_rsa = 1; |
| break; |
| #endif |
| #ifndef OPENSSL_NO_DSA |
| case EVP_PKEY_DSA: |
| if (!have_dsa && tls12_sigalg_allowed(s, op, *sigalgs)) |
| have_dsa = 1; |
| break; |
| #endif |
| #ifndef OPENSSL_NO_EC |
| case EVP_PKEY_EC: |
| if (!have_ecdsa && tls12_sigalg_allowed(s, op, *sigalgs)) |
| have_ecdsa = 1; |
| break; |
| #endif |
| } |
| } |
| if (!have_rsa) |
| *pmask_a |= SSL_aRSA; |
| if (!have_dsa) |
| *pmask_a |= SSL_aDSS; |
| if (!have_ecdsa) |
| *pmask_a |= SSL_aECDSA; |
| } |
| |
| int tls12_copy_sigalgs(SSL *s, WPACKET *pkt, |
| const uint16_t *psig, size_t psiglen) |
| { |
| size_t i; |
| |
| for (i = 0; i < psiglen; i++, psig++) { |
| if (tls12_sigalg_allowed(s, SSL_SECOP_SIGALG_SUPPORTED, *psig)) { |
| if (!WPACKET_put_bytes_u16(pkt, *psig)) |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| /* Given preference and allowed sigalgs set shared sigalgs */ |
| static size_t tls12_shared_sigalgs(SSL *s, const SIGALG_LOOKUP **shsig, |
| const uint16_t *pref, size_t preflen, |
| const uint16_t *allow, size_t allowlen) |
| { |
| const uint16_t *ptmp, *atmp; |
| size_t i, j, nmatch = 0; |
| for (i = 0, ptmp = pref; i < preflen; i++, ptmp++) { |
| /* Skip disabled hashes or signature algorithms */ |
| if (!tls12_sigalg_allowed(s, SSL_SECOP_SIGALG_SHARED, *ptmp)) |
| continue; |
| for (j = 0, atmp = allow; j < allowlen; j++, atmp++) { |
| if (*ptmp == *atmp) { |
| nmatch++; |
| if (shsig) { |
| *shsig = tls1_lookup_sigalg(*ptmp); |
| shsig++; |
| } |
| break; |
| } |
| } |
| } |
| return nmatch; |
| } |
| |
| /* Set shared signature algorithms for SSL structures */ |
| static int tls1_set_shared_sigalgs(SSL *s) |
| { |
| const uint16_t *pref, *allow, *conf; |
| size_t preflen, allowlen, conflen; |
| size_t nmatch; |
| const SIGALG_LOOKUP **salgs = NULL; |
| CERT *c = s->cert; |
| unsigned int is_suiteb = tls1_suiteb(s); |
| |
| OPENSSL_free(c->shared_sigalgs); |
| c->shared_sigalgs = NULL; |
| c->shared_sigalgslen = 0; |
| /* If client use client signature algorithms if not NULL */ |
| if (!s->server && c->client_sigalgs && !is_suiteb) { |
| conf = c->client_sigalgs; |
| conflen = c->client_sigalgslen; |
| } else if (c->conf_sigalgs && !is_suiteb) { |
| conf = c->conf_sigalgs; |
| conflen = c->conf_sigalgslen; |
| } else |
| conflen = tls12_get_psigalgs(s, 0, &conf); |
| if (s->options & SSL_OP_CIPHER_SERVER_PREFERENCE || is_suiteb) { |
| pref = conf; |
| preflen = conflen; |
| allow = s->s3->tmp.peer_sigalgs; |
| allowlen = s->s3->tmp.peer_sigalgslen; |
| } else { |
| allow = conf; |
| allowlen = conflen; |
| pref = s->s3->tmp.peer_sigalgs; |
| preflen = s->s3->tmp.peer_sigalgslen; |
| } |
| nmatch = tls12_shared_sigalgs(s, NULL, pref, preflen, allow, allowlen); |
| if (nmatch) { |
| salgs = OPENSSL_malloc(nmatch * sizeof(*salgs)); |
| if (salgs == NULL) |
| return 0; |
| nmatch = tls12_shared_sigalgs(s, salgs, pref, preflen, allow, allowlen); |
| } else { |
| salgs = NULL; |
| } |
| c->shared_sigalgs = salgs; |
| c->shared_sigalgslen = nmatch; |
| return 1; |
| } |
| |
| /* Set preferred digest for each key type */ |
| |
| int tls1_save_sigalgs(SSL *s, PACKET *pkt) |
| { |
| CERT *c = s->cert; |
| unsigned int stmp; |
| size_t size, i; |
| |
| /* Extension ignored for inappropriate versions */ |
| if (!SSL_USE_SIGALGS(s)) |
| return 1; |
| /* Should never happen */ |
| if (!c) |
| return 0; |
| |
| size = PACKET_remaining(pkt); |
| |
| /* Invalid data length */ |
| if ((size & 1) != 0) |
| return 0; |
| |
| size >>= 1; |
| |
| OPENSSL_free(s->s3->tmp.peer_sigalgs); |
| s->s3->tmp.peer_sigalgs = OPENSSL_malloc(size |
| * sizeof(*s->s3->tmp.peer_sigalgs)); |
| if (s->s3->tmp.peer_sigalgs == NULL) |
| return 0; |
| s->s3->tmp.peer_sigalgslen = size; |
| for (i = 0; i < size && PACKET_get_net_2(pkt, &stmp); i++) |
| s->s3->tmp.peer_sigalgs[i] = stmp; |
| |
| if (i != size) |
| return 0; |
| |
| return 1; |
| } |
| |
| int tls1_process_sigalgs(SSL *s) |
| { |
| size_t i; |
| uint32_t *pvalid = s->s3->tmp.valid_flags; |
| CERT *c = s->cert; |
| |
| if (!tls1_set_shared_sigalgs(s)) |
| return 0; |
| |
| for (i = 0; i < SSL_PKEY_NUM; i++) |
| pvalid[i] = 0; |
| |
| for (i = 0; i < c->shared_sigalgslen; i++) { |
| const SIGALG_LOOKUP *sigptr = c->shared_sigalgs[i]; |
| int idx = sigptr->sig_idx; |
| |
| /* Ignore PKCS1 based sig algs in TLSv1.3 */ |
| if (SSL_IS_TLS13(s) && sigptr->sig == EVP_PKEY_RSA) |
| continue; |
| /* If not disabled indicate we can explicitly sign */ |
| if (pvalid[idx] == 0 && tls12_get_pkey_idx(sigptr->sig) != -1) |
| pvalid[sigptr->sig_idx] = CERT_PKEY_EXPLICIT_SIGN | CERT_PKEY_SIGN; |
| } |
| return 1; |
| } |
| |
| int SSL_get_sigalgs(SSL *s, int idx, |
| int *psign, int *phash, int *psignhash, |
| unsigned char *rsig, unsigned char *rhash) |
| { |
| uint16_t *psig = s->s3->tmp.peer_sigalgs; |
| size_t numsigalgs = s->s3->tmp.peer_sigalgslen; |
| if (psig == NULL || numsigalgs > INT_MAX) |
| return 0; |
| if (idx >= 0) { |
| const SIGALG_LOOKUP *lu; |
| |
| if (idx >= (int)numsigalgs) |
| return 0; |
| psig += idx; |
| if (rhash != NULL) |
| *rhash = (unsigned char)((*psig >> 8) & 0xff); |
| if (rsig != NULL) |
| *rsig = (unsigned char)(*psig & 0xff); |
| lu = tls1_lookup_sigalg(*psig); |
| if (psign != NULL) |
| *psign = lu != NULL ? lu->sig : NID_undef; |
| if (phash != NULL) |
| *phash = lu != NULL ? lu->hash : NID_undef; |
| if (psignhash != NULL) |
| *psignhash = lu != NULL ? lu->sigandhash : NID_undef; |
| } |
| return (int)numsigalgs; |
| } |
| |
| int SSL_get_shared_sigalgs(SSL *s, int idx, |
| int *psign, int *phash, int *psignhash, |
| unsigned char *rsig, unsigned char *rhash) |
| { |
| const SIGALG_LOOKUP *shsigalgs; |
| if (s->cert->shared_sigalgs == NULL |
| || idx < 0 |
| || idx >= (int)s->cert->shared_sigalgslen |
| || s->cert->shared_sigalgslen > INT_MAX) |
| return 0; |
| shsigalgs = s->cert->shared_sigalgs[idx]; |
| if (phash != NULL) |
| *phash = shsigalgs->hash; |
| if (psign != NULL) |
| *psign = shsigalgs->sig; |
| if (psignhash != NULL) |
| *psignhash = shsigalgs->sigandhash; |
| if (rsig != NULL) |
| *rsig = (unsigned char)(shsigalgs->sigalg & 0xff); |
| if (rhash != NULL) |
| *rhash = (unsigned char)((shsigalgs->sigalg >> 8) & 0xff); |
| return (int)s->cert->shared_sigalgslen; |
| } |
| |
| /* Maximum possible number of unique entries in sigalgs array */ |
| #define TLS_MAX_SIGALGCNT (OSSL_NELEM(sigalg_lookup_tbl) * 2) |
| |
| typedef struct { |
| size_t sigalgcnt; |
| int sigalgs[TLS_MAX_SIGALGCNT]; |
| } sig_cb_st; |
| |
| static void get_sigorhash(int *psig, int *phash, const char *str) |
| { |
| if (strcmp(str, "RSA") == 0) { |
| *psig = EVP_PKEY_RSA; |
| } else if (strcmp(str, "RSA-PSS") == 0 || strcmp(str, "PSS") == 0) { |
| *psig = EVP_PKEY_RSA_PSS; |
| } else if (strcmp(str, "DSA") == 0) { |
| *psig = EVP_PKEY_DSA; |
| } else if (strcmp(str, "ECDSA") == 0) { |
| *psig = EVP_PKEY_EC; |
| } else { |
| *phash = OBJ_sn2nid(str); |
| if (*phash == NID_undef) |
| *phash = OBJ_ln2nid(str); |
| } |
| } |
| /* Maximum length of a signature algorithm string component */ |
| #define TLS_MAX_SIGSTRING_LEN 40 |
| |
| static int sig_cb(const char *elem, int len, void *arg) |
| { |
| sig_cb_st *sarg = arg; |
| size_t i; |
| char etmp[TLS_MAX_SIGSTRING_LEN], *p; |
| int sig_alg = NID_undef, hash_alg = NID_undef; |
| if (elem == NULL) |
| return 0; |
| if (sarg->sigalgcnt == TLS_MAX_SIGALGCNT) |
| return 0; |
| if (len > (int)(sizeof(etmp) - 1)) |
| return 0; |
| memcpy(etmp, elem, len); |
| etmp[len] = 0; |
| p = strchr(etmp, '+'); |
| /* See if we have a match for TLS 1.3 names */ |
| if (p == NULL) { |
| const SIGALG_LOOKUP *s; |
| |
| for (i = 0, s = sigalg_lookup_tbl; i < OSSL_NELEM(sigalg_lookup_tbl); |
| i++, s++) { |
| if (s->name != NULL && strcmp(etmp, s->name) == 0) { |
| sig_alg = s->sig; |
| hash_alg = s->hash; |
| break; |
| } |
| } |
| } else { |
| *p = 0; |
| p++; |
| if (*p == 0) |
| return 0; |
| get_sigorhash(&sig_alg, &hash_alg, etmp); |
| get_sigorhash(&sig_alg, &hash_alg, p); |
| } |
| |
| if (sig_alg == NID_undef || hash_alg == NID_undef) |
| return 0; |
| |
| for (i = 0; i < sarg->sigalgcnt; i += 2) { |
| if (sarg->sigalgs[i] == sig_alg && sarg->sigalgs[i + 1] == hash_alg) |
| return 0; |
| } |
| sarg->sigalgs[sarg->sigalgcnt++] = hash_alg; |
| sarg->sigalgs[sarg->sigalgcnt++] = sig_alg; |
| return 1; |
| } |
| |
| /* |
| * Set supported signature algorithms based on a colon separated list of the |
| * form sig+hash e.g. RSA+SHA512:DSA+SHA512 |
| */ |
| int tls1_set_sigalgs_list(CERT *c, const char *str, int client) |
| { |
| sig_cb_st sig; |
| sig.sigalgcnt = 0; |
| if (!CONF_parse_list(str, ':', 1, sig_cb, &sig)) |
| return 0; |
| if (c == NULL) |
| return 1; |
| return tls1_set_sigalgs(c, sig.sigalgs, sig.sigalgcnt, client); |
| } |
| |
| int tls1_set_sigalgs(CERT *c, const int *psig_nids, size_t salglen, int client) |
| { |
| uint16_t *sigalgs, *sptr; |
| size_t i; |
| |
| if (salglen & 1) |
| return 0; |
| sigalgs = OPENSSL_malloc((salglen / 2) * sizeof(*sigalgs)); |
| if (sigalgs == NULL) |
| return 0; |
| for (i = 0, sptr = sigalgs; i < salglen; i += 2) { |
| size_t j; |
| const SIGALG_LOOKUP *curr; |
| int md_id = *psig_nids++; |
| int sig_id = *psig_nids++; |
| |
| for (j = 0, curr = sigalg_lookup_tbl; j < OSSL_NELEM(sigalg_lookup_tbl); |
| j++, curr++) { |
| if (curr->hash == md_id && curr->sig == sig_id) { |
| *sptr++ = curr->sigalg; |
| break; |
| } |
| } |
| |
| if (j == OSSL_NELEM(sigalg_lookup_tbl)) |
| goto err; |
| } |
| |
| if (client) { |
| OPENSSL_free(c->client_sigalgs); |
| c->client_sigalgs = sigalgs; |
| c->client_sigalgslen = salglen / 2; |
| } else { |
| OPENSSL_free(c->conf_sigalgs); |
| c->conf_sigalgs = sigalgs; |
| c->conf_sigalgslen = salglen / 2; |
| } |
| |
| return 1; |
| |
| err: |
| OPENSSL_free(sigalgs); |
| return 0; |
| } |
| |
| static int tls1_check_sig_alg(CERT *c, X509 *x, int default_nid) |
| { |
| int sig_nid; |
| size_t i; |
| if (default_nid == -1) |
| return 1; |
| sig_nid = X509_get_signature_nid(x); |
| if (default_nid) |
| return sig_nid == default_nid ? 1 : 0; |
| for (i = 0; i < c->shared_sigalgslen; i++) |
| if (sig_nid == c->shared_sigalgs[i]->sigandhash) |
| return 1; |
| return 0; |
| } |
| |
| /* Check to see if a certificate issuer name matches list of CA names */ |
| static int ssl_check_ca_name(STACK_OF(X509_NAME) *names, X509 *x) |
| { |
| X509_NAME *nm; |
| int i; |
| nm = X509_get_issuer_name(x); |
| for (i = 0; i < sk_X509_NAME_num(names); i++) { |
| if (!X509_NAME_cmp(nm, sk_X509_NAME_value(names, i))) |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* |
| * Check certificate chain is consistent with TLS extensions and is usable by |
| * server. This servers two purposes: it allows users to check chains before |
| * passing them to the server and it allows the server to check chains before |
| * attempting to use them. |
| */ |
| |
| /* Flags which need to be set for a certificate when stict mode not set */ |
| |
| #define CERT_PKEY_VALID_FLAGS \ |
| (CERT_PKEY_EE_SIGNATURE|CERT_PKEY_EE_PARAM) |
| /* Strict mode flags */ |
| #define CERT_PKEY_STRICT_FLAGS \ |
| (CERT_PKEY_VALID_FLAGS|CERT_PKEY_CA_SIGNATURE|CERT_PKEY_CA_PARAM \ |
| | CERT_PKEY_ISSUER_NAME|CERT_PKEY_CERT_TYPE) |
| |
| int tls1_check_chain(SSL *s, X509 *x, EVP_PKEY *pk, STACK_OF(X509) *chain, |
| int idx) |
| { |
| int i; |
| int rv = 0; |
| int check_flags = 0, strict_mode; |
| CERT_PKEY *cpk = NULL; |
| CERT *c = s->cert; |
| uint32_t *pvalid; |
| unsigned int suiteb_flags = tls1_suiteb(s); |
| /* idx == -1 means checking server chains */ |
| if (idx != -1) { |
| /* idx == -2 means checking client certificate chains */ |
| if (idx == -2) { |
| cpk = c->key; |
| idx = (int)(cpk - c->pkeys); |
| } else |
| cpk = c->pkeys + idx; |
| pvalid = s->s3->tmp.valid_flags + idx; |
| x = cpk->x509; |
| pk = cpk->privatekey; |
| chain = cpk->chain; |
| strict_mode = c->cert_flags & SSL_CERT_FLAGS_CHECK_TLS_STRICT; |
| /* If no cert or key, forget it */ |
| if (!x || !pk) |
| goto end; |
| } else { |
| if (!x || !pk) |
| return 0; |
| idx = ssl_cert_type(x, pk); |
| if (idx == -1) |
| return 0; |
| pvalid = s->s3->tmp.valid_flags + idx; |
| |
| if (c->cert_flags & SSL_CERT_FLAGS_CHECK_TLS_STRICT) |
| check_flags = CERT_PKEY_STRICT_FLAGS; |
| else |
| check_flags = CERT_PKEY_VALID_FLAGS; |
| strict_mode = 1; |
| } |
| |
| if (suiteb_flags) { |
| int ok; |
| if (check_flags) |
| check_flags |= CERT_PKEY_SUITEB; |
| ok = X509_chain_check_suiteb(NULL, x, chain, suiteb_flags); |
| if (ok == X509_V_OK) |
| rv |= CERT_PKEY_SUITEB; |
| else if (!check_flags) |
| goto end; |
| } |
| |
| /* |
| * Check all signature algorithms are consistent with signature |
| * algorithms extension if TLS 1.2 or later and strict mode. |
| */ |
| if (TLS1_get_version(s) >= TLS1_2_VERSION && strict_mode) { |
| int default_nid; |
| int rsign = 0; |
| if (s->s3->tmp.peer_sigalgs) |
| default_nid = 0; |
| /* If no sigalgs extension use defaults from RFC5246 */ |
| else { |
| switch (idx) { |
| case SSL_PKEY_RSA: |
| rsign = EVP_PKEY_RSA; |
| default_nid = NID_sha1WithRSAEncryption; |
| break; |
| |
| case SSL_PKEY_DSA_SIGN: |
| rsign = EVP_PKEY_DSA; |
| default_nid = NID_dsaWithSHA1; |
| break; |
| |
| case SSL_PKEY_ECC: |
| rsign = EVP_PKEY_EC; |
| default_nid = NID_ecdsa_with_SHA1; |
| break; |
| |
| case SSL_PKEY_GOST01: |
| rsign = NID_id_GostR3410_2001; |
| default_nid = NID_id_GostR3411_94_with_GostR3410_2001; |
| break; |
| |
| case SSL_PKEY_GOST12_256: |
| rsign = NID_id_GostR3410_2012_256; |
| default_nid = NID_id_tc26_signwithdigest_gost3410_2012_256; |
| break; |
| |
| case SSL_PKEY_GOST12_512: |
| rsign = NID_id_GostR3410_2012_512; |
| default_nid = NID_id_tc26_signwithdigest_gost3410_2012_512; |
| break; |
| |
| default: |
| default_nid = -1; |
| break; |
| } |
| } |
| /* |
| * If peer sent no signature algorithms extension and we have set |
| * preferred signature algorithms check we support sha1. |
| */ |
| if (default_nid > 0 && c->conf_sigalgs) { |
| size_t j; |
| const uint16_t *p = c->conf_sigalgs; |
| for (j = 0; j < c->conf_sigalgslen; j++, p++) { |
| const SIGALG_LOOKUP *lu = tls1_lookup_sigalg(*p); |
| |
| if (lu != NULL && lu->hash == NID_sha1 && lu->sig == rsign) |
| break; |
| } |
| if (j == c->conf_sigalgslen) { |
| if (check_flags) |
| goto skip_sigs; |
| else |
| goto end; |
| } |
| } |
| /* Check signature algorithm of each cert in chain */ |
| if (!tls1_check_sig_alg(c, x, default_nid)) { |
| if (!check_flags) |
| goto end; |
| } else |
| rv |= CERT_PKEY_EE_SIGNATURE; |
| rv |= CERT_PKEY_CA_SIGNATURE; |
| for (i = 0; i < sk_X509_num(chain); i++) { |
| if (!tls1_check_sig_alg(c, sk_X509_value(chain, i), default_nid)) { |
| if (check_flags) { |
| rv &= ~CERT_PKEY_CA_SIGNATURE; |
| break; |
| } else |
| goto end; |
| } |
| } |
| } |
| /* Else not TLS 1.2, so mark EE and CA signing algorithms OK */ |
| else if (check_flags) |
| rv |= CERT_PKEY_EE_SIGNATURE | CERT_PKEY_CA_SIGNATURE; |
| skip_sigs: |
| /* Check cert parameters are consistent */ |
| if (tls1_check_cert_param(s, x, 1)) |
| rv |= CERT_PKEY_EE_PARAM; |
| else if (!check_flags) |
| goto end; |
| if (!s->server) |
| rv |= CERT_PKEY_CA_PARAM; |
| /* In strict mode check rest of chain too */ |
| else if (strict_mode) { |
| rv |= CERT_PKEY_CA_PARAM; |
| for (i = 0; i < sk_X509_num(chain); i++) { |
| X509 *ca = sk_X509_value(chain, i); |
| if (!tls1_check_cert_param(s, ca, 0)) { |
| if (check_flags) { |
| rv &= ~CERT_PKEY_CA_PARAM; |
| break; |
| } else |
| goto end; |
| } |
| } |
| } |
| if (!s->server && strict_mode) { |
| STACK_OF(X509_NAME) *ca_dn; |
| int check_type = 0; |
| switch (EVP_PKEY_id(pk)) { |
| case EVP_PKEY_RSA: |
| check_type = TLS_CT_RSA_SIGN; |
| break; |
| case EVP_PKEY_DSA: |
| check_type = TLS_CT_DSS_SIGN; |
| break; |
| case EVP_PKEY_EC: |
| check_type = TLS_CT_ECDSA_SIGN; |
| break; |
| } |
| if (check_type) { |
| const uint8_t *ctypes = s->s3->tmp.ctype; |
| size_t j; |
| |
| for (j = 0; j < s->s3->tmp.ctype_len; j++, ctypes++) { |
| if (*ctypes == check_type) { |
| rv |= CERT_PKEY_CERT_TYPE; |
| break; |
| } |
| } |
| if (!(rv & CERT_PKEY_CERT_TYPE) && !check_flags) |
| goto end; |
| } else { |
| rv |= CERT_PKEY_CERT_TYPE; |
| } |
| |
| ca_dn = s->s3->tmp.ca_names; |
| |
| if (!sk_X509_NAME_num(ca_dn)) |
| rv |= CERT_PKEY_ISSUER_NAME; |
| |
| if (!(rv & CERT_PKEY_ISSUER_NAME)) { |
| if (ssl_check_ca_name(ca_dn, x)) |
| rv |= CERT_PKEY_ISSUER_NAME; |
| } |
| if (!(rv & CERT_PKEY_ISSUER_NAME)) { |
| for (i = 0; i < sk_X509_num(chain); i++) { |
| X509 *xtmp = sk_X509_value(chain, i); |
| if (ssl_check_ca_name(ca_dn, xtmp)) { |
| rv |= CERT_PKEY_ISSUER_NAME; |
| break; |
| } |
| } |
| } |
| if (!check_flags && !(rv & CERT_PKEY_ISSUER_NAME)) |
| goto end; |
| } else |
| rv |= CERT_PKEY_ISSUER_NAME | CERT_PKEY_CERT_TYPE; |
| |
| if (!check_flags || (rv & check_flags) == check_flags) |
| rv |= CERT_PKEY_VALID; |
| |
| end: |
| |
| if (TLS1_get_version(s) >= TLS1_2_VERSION) |
| rv |= *pvalid & (CERT_PKEY_EXPLICIT_SIGN | CERT_PKEY_SIGN); |
| else |
| rv |= CERT_PKEY_SIGN | CERT_PKEY_EXPLICIT_SIGN; |
| |
| /* |
| * When checking a CERT_PKEY structure all flags are irrelevant if the |
| * chain is invalid. |
| */ |
| if (!check_flags) { |
| if (rv & CERT_PKEY_VALID) { |
| *pvalid = rv; |
| } else { |
| /* Preserve sign and explicit sign flag, clear rest */ |
| *pvalid &= CERT_PKEY_EXPLICIT_SIGN | CERT_PKEY_SIGN; |
| return 0; |
| } |
| } |
| return rv; |
| } |
| |
| /* Set validity of certificates in an SSL structure */ |
| void tls1_set_cert_validity(SSL *s) |
| { |
| tls1_check_chain(s, NULL, NULL, NULL, SSL_PKEY_RSA); |
| tls1_check_chain(s, NULL, NULL, NULL, SSL_PKEY_DSA_SIGN); |
| tls1_check_chain(s, NULL, NULL, NULL, SSL_PKEY_ECC); |
| tls1_check_chain(s, NULL, NULL, NULL, SSL_PKEY_GOST01); |
| tls1_check_chain(s, NULL, NULL, NULL, SSL_PKEY_GOST12_256); |
| tls1_check_chain(s, NULL, NULL, NULL, SSL_PKEY_GOST12_512); |
| } |
| |
| /* User level utiity function to check a chain is suitable */ |
| int SSL_check_chain(SSL *s, X509 *x, EVP_PKEY *pk, STACK_OF(X509) *chain) |
| { |
| return tls1_check_chain(s, x, pk, chain, -1); |
| } |
| |
| #ifndef OPENSSL_NO_DH |
| DH *ssl_get_auto_dh(SSL *s) |
| { |
| int dh_secbits = 80; |
| if (s->cert->dh_tmp_auto == 2) |
| return DH_get_1024_160(); |
| if (s->s3->tmp.new_cipher->algorithm_auth & (SSL_aNULL | SSL_aPSK)) { |
| if (s->s3->tmp.new_cipher->strength_bits == 256) |
| dh_secbits = 128; |
| else |
| dh_secbits = 80; |
| } else { |
| if (s->s3->tmp.cert == NULL) |
| return NULL; |
| dh_secbits = EVP_PKEY_security_bits(s->s3->tmp.cert->privatekey); |
| } |
| |
| if (dh_secbits >= 128) { |
| DH *dhp = DH_new(); |
| BIGNUM *p, *g; |
| if (dhp == NULL) |
| return NULL; |
| g = BN_new(); |
| if (g != NULL) |
| BN_set_word(g, 2); |
| if (dh_secbits >= 192) |
| p = BN_get_rfc3526_prime_8192(NULL); |
| else |
| p = BN_get_rfc3526_prime_3072(NULL); |
| if (p == NULL || g == NULL || !DH_set0_pqg(dhp, p, NULL, g)) { |
| DH_free(dhp); |
| BN_free(p); |
| BN_free(g); |
| return NULL; |
| } |
| return dhp; |
| } |
| if (dh_secbits >= 112) |
| return DH_get_2048_224(); |
| return DH_get_1024_160(); |
| } |
| #endif |
| |
| static int ssl_security_cert_key(SSL *s, SSL_CTX *ctx, X509 *x, int op) |
| { |
| int secbits = -1; |
| EVP_PKEY *pkey = X509_get0_pubkey(x); |
| if (pkey) { |
| /* |
| * If no parameters this will return -1 and fail using the default |
| * security callback for any non-zero security level. This will |
| * reject keys which omit parameters but this only affects DSA and |
| * omission of parameters is never (?) done in practice. |
| */ |
| secbits = EVP_PKEY_security_bits(pkey); |
| } |
| if (s) |
| return ssl_security(s, op, secbits, 0, x); |
| else |
| return ssl_ctx_security(ctx, op, secbits, 0, x); |
| } |
| |
| static int ssl_security_cert_sig(SSL *s, SSL_CTX *ctx, X509 *x, int op) |
| { |
| /* Lookup signature algorithm digest */ |
| int secbits = -1, md_nid = NID_undef, sig_nid; |
| /* Don't check signature if self signed */ |
| if ((X509_get_extension_flags(x) & EXFLAG_SS) != 0) |
| return 1; |
| sig_nid = X509_get_signature_nid(x); |
| if (sig_nid && OBJ_find_sigid_algs(sig_nid, &md_nid, NULL)) { |
| const EVP_MD *md; |
| if (md_nid && (md = EVP_get_digestbynid(md_nid))) |
| secbits = EVP_MD_size(md) * 4; |
| } |
| if (s) |
| return ssl_security(s, op, secbits, md_nid, x); |
| else |
| return ssl_ctx_security(ctx, op, secbits, md_nid, x); |
| } |
| |
| int ssl_security_cert(SSL *s, SSL_CTX *ctx, X509 *x, int vfy, int is_ee) |
| { |
| if (vfy) |
| vfy = SSL_SECOP_PEER; |
| if (is_ee) { |
| if (!ssl_security_cert_key(s, ctx, x, SSL_SECOP_EE_KEY | vfy)) |
| return SSL_R_EE_KEY_TOO_SMALL; |
| } else { |
| if (!ssl_security_cert_key(s, ctx, x, SSL_SECOP_CA_KEY | vfy)) |
| return SSL_R_CA_KEY_TOO_SMALL; |
| } |
| if (!ssl_security_cert_sig(s, ctx, x, SSL_SECOP_CA_MD | vfy)) |
| return SSL_R_CA_MD_TOO_WEAK; |
| return 1; |
| } |
| |
| /* |
| * Check security of a chain, if sk includes the end entity certificate then |
| * x is NULL. If vfy is 1 then we are verifying a peer chain and not sending |
| * one to the peer. Return values: 1 if ok otherwise error code to use |
| */ |
| |
| int ssl_security_cert_chain(SSL *s, STACK_OF(X509) *sk, X509 *x, int vfy) |
| { |
| int rv, start_idx, i; |
| if (x == NULL) { |
| x = sk_X509_value(sk, 0); |
| start_idx = 1; |
| } else |
| start_idx = 0; |
| |
| rv = ssl_security_cert(s, NULL, x, vfy, 1); |
| if (rv != 1) |
| return rv; |
| |
| for (i = start_idx; i < sk_X509_num(sk); i++) { |
| x = sk_X509_value(sk, i); |
| rv = ssl_security_cert(s, NULL, x, vfy, 0); |
| if (rv != 1) |
| return rv; |
| } |
| return 1; |
| } |
| |
| /* |
| * Choose an appropriate signature algorithm based on available certificates |
| * Sets chosen certificate and signature algorithm. |
| * |
| * For servers if we fail to find a required certificate it is a fatal error |
| * and an appropriate error code is set and the TLS alert set in *al. |
| * |
| * For clients al is set to NULL. If a certificate is not suitable it is not |
| * a fatal error: we will either try another certificate or not present one |
| * to the server. In this case no error is set. |
| */ |
| int tls_choose_sigalg(SSL *s, int *al) |
| { |
| int idx = -1; |
| const SIGALG_LOOKUP *lu = NULL; |
| |
| s->s3->tmp.cert = NULL; |
| s->s3->tmp.sigalg = NULL; |
| |
| if (SSL_IS_TLS13(s)) { |
| size_t i; |
| #ifndef OPENSSL_NO_EC |
| int curve = -1, skip_ec = 0; |
| #endif |
| |
| /* Look for a certificate matching shared sigaglgs */ |
| for (i = 0; i < s->cert->shared_sigalgslen; i++) { |
| lu = s->cert->shared_sigalgs[i]; |
| |
| /* Skip SHA1, DSA and RSA if not PSS */ |
| if (lu->hash == NID_sha1 || lu->sig == EVP_PKEY_DSA |
| || lu->sig == EVP_PKEY_RSA) |
| continue; |
| if (ssl_md(lu->hash_idx) == NULL) |
| continue; |
| idx = lu->sig_idx; |
| if (!ssl_has_cert(s, idx)) |
| continue; |
| if (lu->sig == EVP_PKEY_EC) { |
| #ifndef OPENSSL_NO_EC |
| if (curve == -1) { |
| EC_KEY *ec = EVP_PKEY_get0_EC_KEY(s->cert->pkeys[idx].privatekey); |
| |
| curve = EC_GROUP_get_curve_name(EC_KEY_get0_group(ec)); |
| if (EC_KEY_get_conv_form(ec) |
| != POINT_CONVERSION_UNCOMPRESSED) |
| skip_ec = 1; |
| } |
| if (skip_ec || (lu->curve != NID_undef && curve != lu->curve)) |
| continue; |
| #else |
| continue; |
| #endif |
| } |
| break; |
| } |
| if (i == s->cert->shared_sigalgslen) { |
| if (al == NULL) |
| return 1; |
| *al = SSL_AD_HANDSHAKE_FAILURE; |
| SSLerr(SSL_F_TLS_CHOOSE_SIGALG, |
| SSL_R_NO_SUITABLE_SIGNATURE_ALGORITHM); |
| return 0; |
| } |
| } else { |
| if (s->server) { |
| /* Find index corresponding to ciphersuite */ |
| idx = ssl_cipher_get_cert_index(s->s3->tmp.new_cipher); |
| /* If no certificate for ciphersuite return */ |
| if (idx == -1) |
| return 1; |
| if (idx == SSL_PKEY_GOST_EC) { |
| /* Work out which GOST certificate is avaiable */ |
| if (ssl_has_cert(s, SSL_PKEY_GOST12_512)) { |
| idx = SSL_PKEY_GOST12_512; |
| } else if (ssl_has_cert(s, SSL_PKEY_GOST12_256)) { |
| idx = SSL_PKEY_GOST12_256; |
| } else if (ssl_has_cert(s, SSL_PKEY_GOST01)) { |
| idx = SSL_PKEY_GOST01; |
| } else { |
| if (al == NULL) |
| return 1; |
| *al = SSL_AD_INTERNAL_ERROR; |
| SSLerr(SSL_F_TLS_CHOOSE_SIGALG, ERR_R_INTERNAL_ERROR); |
| return 0; |
| } |
| } else if (!ssl_has_cert(s, idx)) { |
| if (al == NULL) |
| return 1; |
| *al = SSL_AD_INTERNAL_ERROR; |
| SSLerr(SSL_F_TLS_CHOOSE_SIGALG, ERR_R_INTERNAL_ERROR); |
| return 0; |
| } |
| } else { |
| /* Find index for client certificate */ |
| idx = s->cert->key - s->cert->pkeys; |
| if (!ssl_has_cert(s, idx)) |
| return 1; |
| } |
| |
| if (SSL_USE_SIGALGS(s)) { |
| if (s->s3->tmp.peer_sigalgs != NULL) { |
| size_t i; |
| #ifndef OPENSSL_NO_EC |
| int curve; |
| |
| /* For Suite B need to match signature algorithm to curve */ |
| if (tls1_suiteb(s)) { |
| EC_KEY *ec = EVP_PKEY_get0_EC_KEY(s->cert->pkeys[idx].privatekey); |
| curve = EC_GROUP_get_curve_name(EC_KEY_get0_group(ec)); |
| } else { |
| curve = -1; |
| } |
| #endif |
| |
| /* |
| * Find highest preference signature algorithm matching |
| * cert type |
| */ |
| for (i = 0; i < s->cert->shared_sigalgslen; i++) { |
| lu = s->cert->shared_sigalgs[i]; |
| #ifdef OPENSSL_NO_EC |
| if (lu->sig_idx == idx) |
| break; |
| #else |
| if (lu->sig_idx == idx |
| && (curve == -1 || lu->curve == curve)) |
| break; |
| #endif |
| if (idx == SSL_PKEY_RSA && lu->sig == EVP_PKEY_RSA_PSS) |
| break; |
| } |
| if (i == s->cert->shared_sigalgslen) { |
| if (al == NULL) |
| return 1; |
| *al = SSL_AD_INTERNAL_ERROR; |
| SSLerr(SSL_F_TLS_CHOOSE_SIGALG, ERR_R_INTERNAL_ERROR); |
| return 0; |
| } |
| } else { |
| /* |
| * If we have no sigalg use defaults |
| */ |
| const uint16_t *sent_sigs; |
| size_t sent_sigslen, i; |
| |
| if ((lu = tls1_get_legacy_sigalg(s, idx)) == NULL) { |
| if (al == NULL) |
| return 1; |
| *al = SSL_AD_INTERNAL_ERROR; |
| SSLerr(SSL_F_TLS_CHOOSE_SIGALG, ERR_R_INTERNAL_ERROR); |
| return 0; |
| } |
| |
| /* Check signature matches a type we sent */ |
| sent_sigslen = tls12_get_psigalgs(s, 1, &sent_sigs); |
| for (i = 0; i < sent_sigslen; i++, sent_sigs++) { |
| if (lu->sigalg == *sent_sigs) |
| break; |
| } |
| if (i == sent_sigslen) { |
| if (al == NULL) |
| return 1; |
| SSLerr(SSL_F_TLS_CHOOSE_SIGALG, SSL_R_WRONG_SIGNATURE_TYPE); |
| *al = SSL_AD_HANDSHAKE_FAILURE; |
| return 0; |
| } |
| } |
| } else { |
| if ((lu = tls1_get_legacy_sigalg(s, idx)) == NULL) { |
| if (al == NULL) |
| return 1; |
| *al = SSL_AD_INTERNAL_ERROR; |
| SSLerr(SSL_F_TLS_CHOOSE_SIGALG, ERR_R_INTERNAL_ERROR); |
| return 0; |
| } |
| } |
| } |
| if (idx == -1) { |
| if (al != NULL) { |
| *al = SSL_AD_INTERNAL_ERROR; |
| SSLerr(SSL_F_TLS_CHOOSE_SIGALG, ERR_R_INTERNAL_ERROR); |
| } |
| return 0; |
| } |
| s->s3->tmp.cert = &s->cert->pkeys[idx]; |
| s->cert->key = s->s3->tmp.cert; |
| s->s3->tmp.sigalg = lu; |
| return 1; |
| } |