| /* ssl/ssl_locl.h */ |
| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] |
| */ |
| /* ==================================================================== |
| * Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. All advertising materials mentioning features or use of this |
| * software must display the following acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" |
| * |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For written permission, please contact |
| * openssl-core@openssl.org. |
| * |
| * 5. Products derived from this software may not be called "OpenSSL" |
| * nor may "OpenSSL" appear in their names without prior written |
| * permission of the OpenSSL Project. |
| * |
| * 6. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This product includes cryptographic software written by Eric Young |
| * (eay@cryptsoft.com). This product includes software written by Tim |
| * Hudson (tjh@cryptsoft.com). |
| * |
| */ |
| /* ==================================================================== |
| * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. |
| * ECC cipher suite support in OpenSSL originally developed by |
| * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. |
| */ |
| /* ==================================================================== |
| * Copyright 2005 Nokia. All rights reserved. |
| * |
| * The portions of the attached software ("Contribution") is developed by |
| * Nokia Corporation and is licensed pursuant to the OpenSSL open source |
| * license. |
| * |
| * The Contribution, originally written by Mika Kousa and Pasi Eronen of |
| * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites |
| * support (see RFC 4279) to OpenSSL. |
| * |
| * No patent licenses or other rights except those expressly stated in |
| * the OpenSSL open source license shall be deemed granted or received |
| * expressly, by implication, estoppel, or otherwise. |
| * |
| * No assurances are provided by Nokia that the Contribution does not |
| * infringe the patent or other intellectual property rights of any third |
| * party or that the license provides you with all the necessary rights |
| * to make use of the Contribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN |
| * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA |
| * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY |
| * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR |
| * OTHERWISE. |
| */ |
| |
| #ifndef HEADER_SSL_LOCL_H |
| # define HEADER_SSL_LOCL_H |
| # include <stdlib.h> |
| # include <time.h> |
| # include <string.h> |
| # include <errno.h> |
| |
| # include "e_os.h" |
| |
| # include <openssl/buffer.h> |
| # ifndef OPENSSL_NO_COMP |
| # include <openssl/comp.h> |
| # endif |
| # include <openssl/bio.h> |
| # include <openssl/stack.h> |
| # ifndef OPENSSL_NO_RSA |
| # include <openssl/rsa.h> |
| # endif |
| # ifndef OPENSSL_NO_DSA |
| # include <openssl/dsa.h> |
| # endif |
| # include <openssl/err.h> |
| # include <openssl/ssl.h> |
| # include <openssl/async.h> |
| # include <openssl/symhacks.h> |
| |
| #include "record/record.h" |
| #include "statem/statem.h" |
| #include "packet_locl.h" |
| #include "internal/dane.h" |
| |
| # ifdef OPENSSL_BUILD_SHLIBSSL |
| # undef OPENSSL_EXTERN |
| # define OPENSSL_EXTERN OPENSSL_EXPORT |
| # endif |
| |
| # undef PKCS1_CHECK |
| |
| # define c2l(c,l) (l = ((unsigned long)(*((c)++))) , \ |
| l|=(((unsigned long)(*((c)++)))<< 8), \ |
| l|=(((unsigned long)(*((c)++)))<<16), \ |
| l|=(((unsigned long)(*((c)++)))<<24)) |
| |
| /* NOTE - c is not incremented as per c2l */ |
| # define c2ln(c,l1,l2,n) { \ |
| c+=n; \ |
| l1=l2=0; \ |
| switch (n) { \ |
| case 8: l2 =((unsigned long)(*(--(c))))<<24; \ |
| case 7: l2|=((unsigned long)(*(--(c))))<<16; \ |
| case 6: l2|=((unsigned long)(*(--(c))))<< 8; \ |
| case 5: l2|=((unsigned long)(*(--(c)))); \ |
| case 4: l1 =((unsigned long)(*(--(c))))<<24; \ |
| case 3: l1|=((unsigned long)(*(--(c))))<<16; \ |
| case 2: l1|=((unsigned long)(*(--(c))))<< 8; \ |
| case 1: l1|=((unsigned long)(*(--(c)))); \ |
| } \ |
| } |
| |
| # define l2c(l,c) (*((c)++)=(unsigned char)(((l) )&0xff), \ |
| *((c)++)=(unsigned char)(((l)>> 8)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>>16)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>>24)&0xff)) |
| |
| # define n2l(c,l) (l =((unsigned long)(*((c)++)))<<24, \ |
| l|=((unsigned long)(*((c)++)))<<16, \ |
| l|=((unsigned long)(*((c)++)))<< 8, \ |
| l|=((unsigned long)(*((c)++)))) |
| |
| # define l2n(l,c) (*((c)++)=(unsigned char)(((l)>>24)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>>16)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>> 8)&0xff), \ |
| *((c)++)=(unsigned char)(((l) )&0xff)) |
| |
| # define l2n6(l,c) (*((c)++)=(unsigned char)(((l)>>40)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>>32)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>>24)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>>16)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>> 8)&0xff), \ |
| *((c)++)=(unsigned char)(((l) )&0xff)) |
| |
| # define l2n8(l,c) (*((c)++)=(unsigned char)(((l)>>56)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>>48)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>>40)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>>32)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>>24)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>>16)&0xff), \ |
| *((c)++)=(unsigned char)(((l)>> 8)&0xff), \ |
| *((c)++)=(unsigned char)(((l) )&0xff)) |
| |
| # define n2l6(c,l) (l =((BN_ULLONG)(*((c)++)))<<40, \ |
| l|=((BN_ULLONG)(*((c)++)))<<32, \ |
| l|=((BN_ULLONG)(*((c)++)))<<24, \ |
| l|=((BN_ULLONG)(*((c)++)))<<16, \ |
| l|=((BN_ULLONG)(*((c)++)))<< 8, \ |
| l|=((BN_ULLONG)(*((c)++)))) |
| |
| /* NOTE - c is not incremented as per l2c */ |
| # define l2cn(l1,l2,c,n) { \ |
| c+=n; \ |
| switch (n) { \ |
| case 8: *(--(c))=(unsigned char)(((l2)>>24)&0xff); \ |
| case 7: *(--(c))=(unsigned char)(((l2)>>16)&0xff); \ |
| case 6: *(--(c))=(unsigned char)(((l2)>> 8)&0xff); \ |
| case 5: *(--(c))=(unsigned char)(((l2) )&0xff); \ |
| case 4: *(--(c))=(unsigned char)(((l1)>>24)&0xff); \ |
| case 3: *(--(c))=(unsigned char)(((l1)>>16)&0xff); \ |
| case 2: *(--(c))=(unsigned char)(((l1)>> 8)&0xff); \ |
| case 1: *(--(c))=(unsigned char)(((l1) )&0xff); \ |
| } \ |
| } |
| |
| # define n2s(c,s) ((s=(((unsigned int)(c[0]))<< 8)| \ |
| (((unsigned int)(c[1])) )),c+=2) |
| # define s2n(s,c) ((c[0]=(unsigned char)(((s)>> 8)&0xff), \ |
| c[1]=(unsigned char)(((s) )&0xff)),c+=2) |
| |
| # define n2l3(c,l) ((l =(((unsigned long)(c[0]))<<16)| \ |
| (((unsigned long)(c[1]))<< 8)| \ |
| (((unsigned long)(c[2])) )),c+=3) |
| |
| # define l2n3(l,c) ((c[0]=(unsigned char)(((l)>>16)&0xff), \ |
| c[1]=(unsigned char)(((l)>> 8)&0xff), \ |
| c[2]=(unsigned char)(((l) )&0xff)),c+=3) |
| |
| #define DTLS_VERSION_GT(v1, v2) ((v1) < (v2)) |
| #define DTLS_VERSION_GE(v1, v2) ((v1) <= (v2)) |
| #define DTLS_VERSION_LT(v1, v2) ((v1) > (v2)) |
| #define DTLS_VERSION_LE(v1, v2) ((v1) >= (v2)) |
| |
| /* LOCAL STUFF */ |
| |
| # define SSL_DECRYPT 0 |
| # define SSL_ENCRYPT 1 |
| |
| # define TWO_BYTE_BIT 0x80 |
| # define SEC_ESC_BIT 0x40 |
| # define TWO_BYTE_MASK 0x7fff |
| # define THREE_BYTE_MASK 0x3fff |
| |
| # define INC32(a) ((a)=((a)+1)&0xffffffffL) |
| # define DEC32(a) ((a)=((a)-1)&0xffffffffL) |
| # define MAX_MAC_SIZE 20 /* up from 16 for SSLv3 */ |
| |
| /* |
| * Define the Bitmasks for SSL_CIPHER.algorithms. |
| * This bits are used packed as dense as possible. If new methods/ciphers |
| * etc will be added, the bits a likely to change, so this information |
| * is for internal library use only, even though SSL_CIPHER.algorithms |
| * can be publicly accessed. |
| * Use the according functions for cipher management instead. |
| * |
| * The bit mask handling in the selection and sorting scheme in |
| * ssl_create_cipher_list() has only limited capabilities, reflecting |
| * that the different entities within are mutually exclusive: |
| * ONLY ONE BIT PER MASK CAN BE SET AT A TIME. |
| */ |
| |
| /* Bits for algorithm_mkey (key exchange algorithm) */ |
| /* RSA key exchange */ |
| # define SSL_kRSA 0x00000001U |
| /* tmp DH key no DH cert */ |
| # define SSL_kDHE 0x00000002U |
| /* synonym */ |
| # define SSL_kEDH SSL_kDHE |
| /* ECDH cert, RSA CA cert */ |
| # define SSL_kECDHr 0x00000004U |
| /* ECDH cert, ECDSA CA cert */ |
| # define SSL_kECDHe 0x00000008U |
| /* ephemeral ECDH */ |
| # define SSL_kECDHE 0x00000010U |
| /* synonym */ |
| # define SSL_kEECDH SSL_kECDHE |
| /* PSK */ |
| # define SSL_kPSK 0x00000020U |
| /* GOST key exchange */ |
| # define SSL_kGOST 0x00000040U |
| /* SRP */ |
| # define SSL_kSRP 0x00000080U |
| |
| # define SSL_kRSAPSK 0x00000100U |
| # define SSL_kECDHEPSK 0x00000200U |
| # define SSL_kDHEPSK 0x00000400U |
| |
| /* all PSK */ |
| |
| #define SSL_PSK (SSL_kPSK | SSL_kRSAPSK | SSL_kECDHEPSK | SSL_kDHEPSK) |
| |
| /* Bits for algorithm_auth (server authentication) */ |
| /* RSA auth */ |
| # define SSL_aRSA 0x00000001U |
| /* DSS auth */ |
| # define SSL_aDSS 0x00000002U |
| /* no auth (i.e. use ADH or AECDH) */ |
| # define SSL_aNULL 0x00000004U |
| /* Fixed ECDH auth (kECDHe or kECDHr) */ |
| # define SSL_aECDH 0x00000008U |
| /* ECDSA auth*/ |
| # define SSL_aECDSA 0x00000010U |
| /* PSK auth */ |
| # define SSL_aPSK 0x00000020U |
| /* GOST R 34.10-2001 signature auth */ |
| # define SSL_aGOST01 0x00000040U |
| /* SRP auth */ |
| # define SSL_aSRP 0x00000080U |
| /* GOST R 34.10-2012 signature auth */ |
| # define SSL_aGOST12 0x00000100U |
| |
| /* Bits for algorithm_enc (symmetric encryption) */ |
| # define SSL_DES 0x00000001U |
| # define SSL_3DES 0x00000002U |
| # define SSL_RC4 0x00000004U |
| # define SSL_RC2 0x00000008U |
| # define SSL_IDEA 0x00000010U |
| # define SSL_eNULL 0x00000020U |
| # define SSL_AES128 0x00000040U |
| # define SSL_AES256 0x00000080U |
| # define SSL_CAMELLIA128 0x00000100U |
| # define SSL_CAMELLIA256 0x00000200U |
| # define SSL_eGOST2814789CNT 0x00000400U |
| # define SSL_SEED 0x00000800U |
| # define SSL_AES128GCM 0x00001000U |
| # define SSL_AES256GCM 0x00002000U |
| # define SSL_AES128CCM 0x00004000U |
| # define SSL_AES256CCM 0x00008000U |
| # define SSL_AES128CCM8 0x00010000U |
| # define SSL_AES256CCM8 0x00020000U |
| # define SSL_eGOST2814789CNT12 0x00040000U |
| # define SSL_CHACHA20POLY1305 0x00080000U |
| |
| # define SSL_AES (SSL_AES128|SSL_AES256|SSL_AES128GCM|SSL_AES256GCM|SSL_AES128CCM|SSL_AES256CCM|SSL_AES128CCM8|SSL_AES256CCM8) |
| # define SSL_CAMELLIA (SSL_CAMELLIA128|SSL_CAMELLIA256) |
| |
| /* Bits for algorithm_mac (symmetric authentication) */ |
| |
| # define SSL_MD5 0x00000001U |
| # define SSL_SHA1 0x00000002U |
| # define SSL_GOST94 0x00000004U |
| # define SSL_GOST89MAC 0x00000008U |
| # define SSL_SHA256 0x00000010U |
| # define SSL_SHA384 0x00000020U |
| /* Not a real MAC, just an indication it is part of cipher */ |
| # define SSL_AEAD 0x00000040U |
| # define SSL_GOST12_256 0x00000080U |
| # define SSL_GOST89MAC12 0x00000100U |
| # define SSL_GOST12_512 0x00000200U |
| |
| /* Bits for algorithm_ssl (protocol version) */ |
| # define SSL_SSLV3 0x00000002U |
| # define SSL_TLSV1 0x00000004U |
| # define SSL_TLSV1_2 0x00000008U |
| |
| /* |
| * When adding new digest in the ssl_ciph.c and increment SSL_MD_NUM_IDX make |
| * sure to update this constant too |
| */ |
| |
| # define SSL_MD_MD5_IDX 0 |
| # define SSL_MD_SHA1_IDX 1 |
| # define SSL_MD_GOST94_IDX 2 |
| # define SSL_MD_GOST89MAC_IDX 3 |
| # define SSL_MD_SHA256_IDX 4 |
| # define SSL_MD_SHA384_IDX 5 |
| # define SSL_MD_GOST12_256_IDX 6 |
| # define SSL_MD_GOST89MAC12_IDX 7 |
| # define SSL_MD_GOST12_512_IDX 8 |
| # define SSL_MD_MD5_SHA1_IDX 9 |
| # define SSL_MD_SHA224_IDX 10 |
| # define SSL_MD_SHA512_IDX 11 |
| # define SSL_MAX_DIGEST 12 |
| |
| /* Bits for algorithm2 (handshake digests and other extra flags) */ |
| |
| /* Bits 0-7 are handshake MAC */ |
| # define SSL_HANDSHAKE_MAC_MASK 0xFF |
| # define SSL_HANDSHAKE_MAC_MD5_SHA1 SSL_MD_MD5_SHA1_IDX |
| # define SSL_HANDSHAKE_MAC_SHA256 SSL_MD_SHA256_IDX |
| # define SSL_HANDSHAKE_MAC_SHA384 SSL_MD_SHA384_IDX |
| # define SSL_HANDSHAKE_MAC_GOST94 SSL_MD_GOST94_IDX |
| # define SSL_HANDSHAKE_MAC_GOST12_256 SSL_MD_GOST12_256_IDX |
| # define SSL_HANDSHAKE_MAC_GOST12_512 SSL_MD_GOST12_512_IDX |
| # define SSL_HANDSHAKE_MAC_DEFAULT SSL_HANDSHAKE_MAC_MD5_SHA1 |
| |
| /* Bits 8-15 bits are PRF */ |
| # define TLS1_PRF_DGST_SHIFT 8 |
| # define TLS1_PRF_SHA1_MD5 (SSL_MD_MD5_SHA1_IDX << TLS1_PRF_DGST_SHIFT) |
| # define TLS1_PRF_SHA256 (SSL_MD_SHA256_IDX << TLS1_PRF_DGST_SHIFT) |
| # define TLS1_PRF_SHA384 (SSL_MD_SHA384_IDX << TLS1_PRF_DGST_SHIFT) |
| # define TLS1_PRF_GOST94 (SSL_MD_GOST94_IDX << TLS1_PRF_DGST_SHIFT) |
| # define TLS1_PRF_GOST12_256 (SSL_MD_GOST12_256_IDX << TLS1_PRF_DGST_SHIFT) |
| # define TLS1_PRF_GOST12_512 (SSL_MD_GOST12_512_IDX << TLS1_PRF_DGST_SHIFT) |
| # define TLS1_PRF (SSL_MD_MD5_SHA1_IDX << TLS1_PRF_DGST_SHIFT) |
| |
| /* |
| * Stream MAC for GOST ciphersuites from cryptopro draft (currently this also |
| * goes into algorithm2) |
| */ |
| # define TLS1_STREAM_MAC 0x10000 |
| |
| # define SSL_DEFAULT_MASK 0X00000020U |
| |
| # define SSL_STRONG_NONE 0x00000001U |
| # define SSL_LOW 0x00000002U |
| # define SSL_MEDIUM 0x00000004U |
| # define SSL_HIGH 0x00000008U |
| # define SSL_FIPS 0x00000010U |
| # define SSL_NOT_DEFAULT 0x00000020U |
| |
| /* we have used 0000003f - 26 bits left to go */ |
| |
| /* Check if an SSL structure is using DTLS */ |
| # define SSL_IS_DTLS(s) (s->method->ssl3_enc->enc_flags & SSL_ENC_FLAG_DTLS) |
| /* See if we need explicit IV */ |
| # define SSL_USE_EXPLICIT_IV(s) \ |
| (s->method->ssl3_enc->enc_flags & SSL_ENC_FLAG_EXPLICIT_IV) |
| /* |
| * See if we use signature algorithms extension and signature algorithm |
| * before signatures. |
| */ |
| # define SSL_USE_SIGALGS(s) \ |
| (s->method->ssl3_enc->enc_flags & SSL_ENC_FLAG_SIGALGS) |
| /* |
| * Allow TLS 1.2 ciphersuites: applies to DTLS 1.2 as well as TLS 1.2: may |
| * apply to others in future. |
| */ |
| # define SSL_USE_TLS1_2_CIPHERS(s) \ |
| (s->method->ssl3_enc->enc_flags & SSL_ENC_FLAG_TLS1_2_CIPHERS) |
| /* |
| * Determine if a client can use TLS 1.2 ciphersuites: can't rely on method |
| * flags because it may not be set to correct version yet. |
| */ |
| # define SSL_CLIENT_USE_TLS1_2_CIPHERS(s) \ |
| ((!SSL_IS_DTLS(s) && s->client_version >= TLS1_2_VERSION) || \ |
| (SSL_IS_DTLS(s) && DTLS_VERSION_GE(s->client_version, DTLS1_2_VERSION))) |
| |
| # ifdef TLSEXT_TYPE_encrypt_then_mac |
| # define SSL_USE_ETM(s) (s->s3->flags & TLS1_FLAGS_ENCRYPT_THEN_MAC) |
| # else |
| # define SSL_USE_ETM(s) (0) |
| # endif |
| |
| /* Mostly for SSLv3 */ |
| # define SSL_PKEY_RSA_ENC 0 |
| # define SSL_PKEY_RSA_SIGN 1 |
| # define SSL_PKEY_DSA_SIGN 2 |
| # define SSL_PKEY_ECC 3 |
| # define SSL_PKEY_GOST01 4 |
| # define SSL_PKEY_GOST12_256 5 |
| # define SSL_PKEY_GOST12_512 6 |
| # define SSL_PKEY_NUM 7 |
| /* |
| * Pseudo-constant. GOST cipher suites can use different certs for 1 |
| * SSL_CIPHER. So let's see which one we have in fact. |
| */ |
| # define SSL_PKEY_GOST_EC SSL_PKEY_NUM+1 |
| |
| /*- |
| * SSL_kRSA <- RSA_ENC |
| * SSL_kDH <- DH_ENC & (RSA_ENC | RSA_SIGN | DSA_SIGN) |
| * SSL_kDHE <- RSA_ENC | RSA_SIGN | DSA_SIGN |
| * SSL_aRSA <- RSA_ENC | RSA_SIGN |
| * SSL_aDSS <- DSA_SIGN |
| */ |
| |
| /*- |
| #define CERT_INVALID 0 |
| #define CERT_PUBLIC_KEY 1 |
| #define CERT_PRIVATE_KEY 2 |
| */ |
| |
| |
| /* CipherSuite length. SSLv3 and all TLS versions. */ |
| #define TLS_CIPHER_LEN 2 |
| /* used to hold info on the particular ciphers used */ |
| struct ssl_cipher_st { |
| uint32_t valid; |
| const char *name; /* text name */ |
| uint32_t id; /* id, 4 bytes, first is version */ |
| /* |
| * changed in 1.0.0: these four used to be portions of a single value |
| * 'algorithms' |
| */ |
| uint32_t algorithm_mkey; /* key exchange algorithm */ |
| uint32_t algorithm_auth; /* server authentication */ |
| uint32_t algorithm_enc; /* symmetric encryption */ |
| uint32_t algorithm_mac; /* symmetric authentication */ |
| uint32_t algorithm_ssl; /* (major) protocol version */ |
| uint32_t algo_strength; /* strength and export flags */ |
| uint32_t algorithm2; /* Extra flags */ |
| int32_t strength_bits; /* Number of bits really used */ |
| uint32_t alg_bits; /* Number of bits for algorithm */ |
| }; |
| |
| /* Used to hold SSL/TLS functions */ |
| struct ssl_method_st { |
| int version; |
| unsigned flags; |
| unsigned long mask; |
| int (*ssl_new) (SSL *s); |
| void (*ssl_clear) (SSL *s); |
| void (*ssl_free) (SSL *s); |
| int (*ssl_accept) (SSL *s); |
| int (*ssl_connect) (SSL *s); |
| int (*ssl_read) (SSL *s, void *buf, int len); |
| int (*ssl_peek) (SSL *s, void *buf, int len); |
| int (*ssl_write) (SSL *s, const void *buf, int len); |
| int (*ssl_shutdown) (SSL *s); |
| int (*ssl_renegotiate) (SSL *s); |
| int (*ssl_renegotiate_check) (SSL *s); |
| int (*ssl_read_bytes) (SSL *s, int type, int *recvd_type, |
| unsigned char *buf, int len, int peek); |
| int (*ssl_write_bytes) (SSL *s, int type, const void *buf_, int len); |
| int (*ssl_dispatch_alert) (SSL *s); |
| long (*ssl_ctrl) (SSL *s, int cmd, long larg, void *parg); |
| long (*ssl_ctx_ctrl) (SSL_CTX *ctx, int cmd, long larg, void *parg); |
| const SSL_CIPHER *(*get_cipher_by_char) (const unsigned char *ptr); |
| int (*put_cipher_by_char) (const SSL_CIPHER *cipher, unsigned char *ptr); |
| int (*ssl_pending) (const SSL *s); |
| int (*num_ciphers) (void); |
| const SSL_CIPHER *(*get_cipher) (unsigned ncipher); |
| const struct ssl_method_st *(*get_ssl_method) (int version); |
| long (*get_timeout) (void); |
| const struct ssl3_enc_method *ssl3_enc; /* Extra SSLv3/TLS stuff */ |
| int (*ssl_version) (void); |
| long (*ssl_callback_ctrl) (SSL *s, int cb_id, void (*fp) (void)); |
| long (*ssl_ctx_callback_ctrl) (SSL_CTX *s, int cb_id, void (*fp) (void)); |
| }; |
| |
| /*- |
| * Lets make this into an ASN.1 type structure as follows |
| * SSL_SESSION_ID ::= SEQUENCE { |
| * version INTEGER, -- structure version number |
| * SSLversion INTEGER, -- SSL version number |
| * Cipher OCTET STRING, -- the 3 byte cipher ID |
| * Session_ID OCTET STRING, -- the Session ID |
| * Master_key OCTET STRING, -- the master key |
| * Key_Arg [ 0 ] IMPLICIT OCTET STRING, -- the optional Key argument |
| * Time [ 1 ] EXPLICIT INTEGER, -- optional Start Time |
| * Timeout [ 2 ] EXPLICIT INTEGER, -- optional Timeout ins seconds |
| * Peer [ 3 ] EXPLICIT X509, -- optional Peer Certificate |
| * Session_ID_context [ 4 ] EXPLICIT OCTET STRING, -- the Session ID context |
| * Verify_result [ 5 ] EXPLICIT INTEGER, -- X509_V_... code for `Peer' |
| * HostName [ 6 ] EXPLICIT OCTET STRING, -- optional HostName from servername TLS extension |
| * PSK_identity_hint [ 7 ] EXPLICIT OCTET STRING, -- optional PSK identity hint |
| * PSK_identity [ 8 ] EXPLICIT OCTET STRING, -- optional PSK identity |
| * Ticket_lifetime_hint [9] EXPLICIT INTEGER, -- server's lifetime hint for session ticket |
| * Ticket [10] EXPLICIT OCTET STRING, -- session ticket (clients only) |
| * Compression_meth [11] EXPLICIT OCTET STRING, -- optional compression method |
| * SRP_username [ 12 ] EXPLICIT OCTET STRING -- optional SRP username |
| * flags [ 13 ] EXPLICIT INTEGER -- optional flags |
| * } |
| * Look in ssl/ssl_asn1.c for more details |
| * I'm using EXPLICIT tags so I can read the damn things using asn1parse :-). |
| */ |
| struct ssl_session_st { |
| int ssl_version; /* what ssl version session info is being |
| * kept in here? */ |
| int master_key_length; |
| unsigned char master_key[SSL_MAX_MASTER_KEY_LENGTH]; |
| /* session_id - valid? */ |
| unsigned int session_id_length; |
| unsigned char session_id[SSL_MAX_SSL_SESSION_ID_LENGTH]; |
| /* |
| * this is used to determine whether the session is being reused in the |
| * appropriate context. It is up to the application to set this, via |
| * SSL_new |
| */ |
| unsigned int sid_ctx_length; |
| unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; |
| # ifndef OPENSSL_NO_PSK |
| char *psk_identity_hint; |
| char *psk_identity; |
| # endif |
| /* |
| * Used to indicate that session resumption is not allowed. Applications |
| * can also set this bit for a new session via not_resumable_session_cb |
| * to disable session caching and tickets. |
| */ |
| int not_resumable; |
| /* This is the cert and type for the other end. */ |
| X509 *peer; |
| int peer_type; |
| /* Certificate chain of peer */ |
| STACK_OF(X509) *peer_chain; |
| /* |
| * when app_verify_callback accepts a session where the peer's |
| * certificate is not ok, we must remember the error for session reuse: |
| */ |
| long verify_result; /* only for servers */ |
| int references; |
| long timeout; |
| long time; |
| unsigned int compress_meth; /* Need to lookup the method */ |
| const SSL_CIPHER *cipher; |
| unsigned long cipher_id; /* when ASN.1 loaded, this needs to be used |
| * to load the 'cipher' structure */ |
| STACK_OF(SSL_CIPHER) *ciphers; /* shared ciphers? */ |
| CRYPTO_EX_DATA ex_data; /* application specific data */ |
| /* |
| * These are used to make removal of session-ids more efficient and to |
| * implement a maximum cache size. |
| */ |
| struct ssl_session_st *prev, *next; |
| char *tlsext_hostname; |
| # ifndef OPENSSL_NO_EC |
| size_t tlsext_ecpointformatlist_length; |
| unsigned char *tlsext_ecpointformatlist; /* peer's list */ |
| size_t tlsext_ellipticcurvelist_length; |
| unsigned char *tlsext_ellipticcurvelist; /* peer's list */ |
| # endif /* OPENSSL_NO_EC */ |
| /* RFC4507 info */ |
| unsigned char *tlsext_tick; /* Session ticket */ |
| size_t tlsext_ticklen; /* Session ticket length */ |
| unsigned long tlsext_tick_lifetime_hint; /* Session lifetime hint in seconds */ |
| # ifndef OPENSSL_NO_SRP |
| char *srp_username; |
| # endif |
| uint32_t flags; |
| }; |
| |
| /* Extended master secret support */ |
| # define SSL_SESS_FLAG_EXTMS 0x1 |
| |
| |
| # ifndef OPENSSL_NO_SRP |
| |
| typedef struct srp_ctx_st { |
| /* param for all the callbacks */ |
| void *SRP_cb_arg; |
| /* set client Hello login callback */ |
| int (*TLS_ext_srp_username_callback) (SSL *, int *, void *); |
| /* set SRP N/g param callback for verification */ |
| int (*SRP_verify_param_callback) (SSL *, void *); |
| /* set SRP client passwd callback */ |
| char *(*SRP_give_srp_client_pwd_callback) (SSL *, void *); |
| char *login; |
| BIGNUM *N, *g, *s, *B, *A; |
| BIGNUM *a, *b, *v; |
| char *info; |
| int strength; |
| unsigned long srp_Mask; |
| } SRP_CTX; |
| |
| # endif |
| |
| struct ssl_comp_st { |
| int id; |
| const char *name; |
| COMP_METHOD *method; |
| }; |
| |
| DEFINE_LHASH_OF(SSL_SESSION); |
| |
| |
| struct ssl_ctx_st { |
| const SSL_METHOD *method; |
| STACK_OF(SSL_CIPHER) *cipher_list; |
| /* same as above but sorted for lookup */ |
| STACK_OF(SSL_CIPHER) *cipher_list_by_id; |
| struct x509_store_st /* X509_STORE */ *cert_store; |
| LHASH_OF(SSL_SESSION) *sessions; |
| /* |
| * Most session-ids that will be cached, default is |
| * SSL_SESSION_CACHE_MAX_SIZE_DEFAULT. 0 is unlimited. |
| */ |
| unsigned long session_cache_size; |
| struct ssl_session_st *session_cache_head; |
| struct ssl_session_st *session_cache_tail; |
| /* |
| * This can have one of 2 values, ored together, SSL_SESS_CACHE_CLIENT, |
| * SSL_SESS_CACHE_SERVER, Default is SSL_SESSION_CACHE_SERVER, which |
| * means only SSL_accept which cache SSL_SESSIONS. |
| */ |
| uint32_t session_cache_mode; |
| /* |
| * If timeout is not 0, it is the default timeout value set when |
| * SSL_new() is called. This has been put in to make life easier to set |
| * things up |
| */ |
| long session_timeout; |
| /* |
| * If this callback is not null, it will be called each time a session id |
| * is added to the cache. If this function returns 1, it means that the |
| * callback will do a SSL_SESSION_free() when it has finished using it. |
| * Otherwise, on 0, it means the callback has finished with it. If |
| * remove_session_cb is not null, it will be called when a session-id is |
| * removed from the cache. After the call, OpenSSL will |
| * SSL_SESSION_free() it. |
| */ |
| int (*new_session_cb) (struct ssl_st *ssl, SSL_SESSION *sess); |
| void (*remove_session_cb) (struct ssl_ctx_st *ctx, SSL_SESSION *sess); |
| SSL_SESSION *(*get_session_cb) (struct ssl_st *ssl, |
| unsigned char *data, int len, int *copy); |
| struct { |
| int sess_connect; /* SSL new conn - started */ |
| int sess_connect_renegotiate; /* SSL reneg - requested */ |
| int sess_connect_good; /* SSL new conne/reneg - finished */ |
| int sess_accept; /* SSL new accept - started */ |
| int sess_accept_renegotiate; /* SSL reneg - requested */ |
| int sess_accept_good; /* SSL accept/reneg - finished */ |
| int sess_miss; /* session lookup misses */ |
| int sess_timeout; /* reuse attempt on timeouted session */ |
| int sess_cache_full; /* session removed due to full cache */ |
| int sess_hit; /* session reuse actually done */ |
| int sess_cb_hit; /* session-id that was not in the cache was |
| * passed back via the callback. This |
| * indicates that the application is |
| * supplying session-id's from other |
| * processes - spooky :-) */ |
| } stats; |
| |
| int references; |
| |
| /* if defined, these override the X509_verify_cert() calls */ |
| int (*app_verify_callback) (X509_STORE_CTX *, void *); |
| void *app_verify_arg; |
| /* |
| * before OpenSSL 0.9.7, 'app_verify_arg' was ignored |
| * ('app_verify_callback' was called with just one argument) |
| */ |
| |
| /* Default password callback. */ |
| pem_password_cb *default_passwd_callback; |
| |
| /* Default password callback user data. */ |
| void *default_passwd_callback_userdata; |
| |
| /* get client cert callback */ |
| int (*client_cert_cb) (SSL *ssl, X509 **x509, EVP_PKEY **pkey); |
| |
| /* cookie generate callback */ |
| int (*app_gen_cookie_cb) (SSL *ssl, unsigned char *cookie, |
| unsigned int *cookie_len); |
| |
| /* verify cookie callback */ |
| int (*app_verify_cookie_cb) (SSL *ssl, const unsigned char *cookie, |
| unsigned int cookie_len); |
| |
| CRYPTO_EX_DATA ex_data; |
| |
| const EVP_MD *md5; /* For SSLv3/TLSv1 'ssl3-md5' */ |
| const EVP_MD *sha1; /* For SSLv3/TLSv1 'ssl3->sha1' */ |
| |
| STACK_OF(X509) *extra_certs; |
| STACK_OF(SSL_COMP) *comp_methods; /* stack of SSL_COMP, SSLv3/TLSv1 */ |
| |
| /* Default values used when no per-SSL value is defined follow */ |
| |
| /* used if SSL's info_callback is NULL */ |
| void (*info_callback) (const SSL *ssl, int type, int val); |
| |
| /* what we put in client cert requests */ |
| STACK_OF(X509_NAME) *client_CA; |
| |
| /* |
| * Default values to use in SSL structures follow (these are copied by |
| * SSL_new) |
| */ |
| |
| uint32_t options; |
| uint32_t mode; |
| int min_proto_version; |
| int max_proto_version; |
| long max_cert_list; |
| |
| struct cert_st /* CERT */ *cert; |
| int read_ahead; |
| |
| /* callback that allows applications to peek at protocol messages */ |
| void (*msg_callback) (int write_p, int version, int content_type, |
| const void *buf, size_t len, SSL *ssl, void *arg); |
| void *msg_callback_arg; |
| |
| uint32_t verify_mode; |
| unsigned int sid_ctx_length; |
| unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; |
| /* called 'verify_callback' in the SSL */ |
| int (*default_verify_callback) (int ok, X509_STORE_CTX *ctx); |
| |
| /* Default generate session ID callback. */ |
| GEN_SESSION_CB generate_session_id; |
| |
| X509_VERIFY_PARAM *param; |
| |
| int quiet_shutdown; |
| |
| /* |
| * Maximum amount of data to send in one fragment. actual record size can |
| * be more than this due to padding and MAC overheads. |
| */ |
| unsigned int max_send_fragment; |
| |
| # ifndef OPENSSL_NO_ENGINE |
| /* |
| * Engine to pass requests for client certs to |
| */ |
| ENGINE *client_cert_engine; |
| # endif |
| |
| /* TLS extensions servername callback */ |
| int (*tlsext_servername_callback) (SSL *, int *, void *); |
| void *tlsext_servername_arg; |
| /* RFC 4507 session ticket keys */ |
| unsigned char tlsext_tick_key_name[16]; |
| unsigned char tlsext_tick_hmac_key[16]; |
| unsigned char tlsext_tick_aes_key[16]; |
| /* Callback to support customisation of ticket key setting */ |
| int (*tlsext_ticket_key_cb) (SSL *ssl, |
| unsigned char *name, unsigned char *iv, |
| EVP_CIPHER_CTX *ectx, |
| HMAC_CTX *hctx, int enc); |
| |
| /* certificate status request info */ |
| /* Callback for status request */ |
| int (*tlsext_status_cb) (SSL *ssl, void *arg); |
| void *tlsext_status_arg; |
| |
| # ifndef OPENSSL_NO_PSK |
| unsigned int (*psk_client_callback) (SSL *ssl, const char *hint, |
| char *identity, |
| unsigned int max_identity_len, |
| unsigned char *psk, |
| unsigned int max_psk_len); |
| unsigned int (*psk_server_callback) (SSL *ssl, const char *identity, |
| unsigned char *psk, |
| unsigned int max_psk_len); |
| # endif |
| |
| # ifndef OPENSSL_NO_SRP |
| SRP_CTX srp_ctx; /* ctx for SRP authentication */ |
| # endif |
| |
| # ifndef OPENSSL_NO_NEXTPROTONEG |
| /* Next protocol negotiation information */ |
| /* (for experimental NPN extension). */ |
| |
| /* |
| * For a server, this contains a callback function by which the set of |
| * advertised protocols can be provided. |
| */ |
| int (*next_protos_advertised_cb) (SSL *s, const unsigned char **buf, |
| unsigned int *len, void *arg); |
| void *next_protos_advertised_cb_arg; |
| /* |
| * For a client, this contains a callback function that selects the next |
| * protocol from the list provided by the server. |
| */ |
| int (*next_proto_select_cb) (SSL *s, unsigned char **out, |
| unsigned char *outlen, |
| const unsigned char *in, |
| unsigned int inlen, void *arg); |
| void *next_proto_select_cb_arg; |
| # endif |
| |
| /* |
| * ALPN information (we are in the process of transitioning from NPN to |
| * ALPN.) |
| */ |
| |
| /*- |
| * For a server, this contains a callback function that allows the |
| * server to select the protocol for the connection. |
| * out: on successful return, this must point to the raw protocol |
| * name (without the length prefix). |
| * outlen: on successful return, this contains the length of |*out|. |
| * in: points to the client's list of supported protocols in |
| * wire-format. |
| * inlen: the length of |in|. |
| */ |
| int (*alpn_select_cb) (SSL *s, |
| const unsigned char **out, |
| unsigned char *outlen, |
| const unsigned char *in, |
| unsigned int inlen, void *arg); |
| void *alpn_select_cb_arg; |
| |
| /* |
| * For a client, this contains the list of supported protocols in wire |
| * format. |
| */ |
| unsigned char *alpn_client_proto_list; |
| unsigned alpn_client_proto_list_len; |
| |
| /* Shared DANE context */ |
| struct dane_ctx_st dane; |
| |
| /* SRTP profiles we are willing to do from RFC 5764 */ |
| STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; |
| /* |
| * Callback for disabling session caching and ticket support on a session |
| * basis, depending on the chosen cipher. |
| */ |
| int (*not_resumable_session_cb) (SSL *ssl, int is_forward_secure); |
| # ifndef OPENSSL_NO_EC |
| /* EC extension values inherited by SSL structure */ |
| size_t tlsext_ecpointformatlist_length; |
| unsigned char *tlsext_ecpointformatlist; |
| size_t tlsext_ellipticcurvelist_length; |
| unsigned char *tlsext_ellipticcurvelist; |
| # endif /* OPENSSL_NO_EC */ |
| }; |
| |
| |
| struct ssl_st { |
| /* |
| * protocol version (one of SSL2_VERSION, SSL3_VERSION, TLS1_VERSION, |
| * DTLS1_VERSION) |
| */ |
| int version; |
| |
| /* SSLv3 */ |
| const SSL_METHOD *method; |
| /* |
| * There are 2 BIO's even though they are normally both the same. This |
| * is so data can be read and written to different handlers |
| */ |
| /* used by SSL_read */ |
| BIO *rbio; |
| /* used by SSL_write */ |
| BIO *wbio; |
| /* used during session-id reuse to concatenate messages */ |
| BIO *bbio; |
| /* |
| * This holds a variable that indicates what we were doing when a 0 or -1 |
| * is returned. This is needed for non-blocking IO so we know what |
| * request needs re-doing when in SSL_accept or SSL_connect |
| */ |
| int rwstate; |
| |
| int (*handshake_func) (SSL *); |
| /* |
| * Imagine that here's a boolean member "init" that is switched as soon |
| * as SSL_set_{accept/connect}_state is called for the first time, so |
| * that "state" and "handshake_func" are properly initialized. But as |
| * handshake_func is == 0 until then, we use this test instead of an |
| * "init" member. |
| */ |
| /* are we the server side? */ |
| int server; |
| /* |
| * Generate a new session or reuse an old one. |
| * NB: For servers, the 'new' session may actually be a previously |
| * cached session or even the previous session unless |
| * SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION is set |
| */ |
| int new_session; |
| /* don't send shutdown packets */ |
| int quiet_shutdown; |
| /* we have shut things down, 0x01 sent, 0x02 for received */ |
| int shutdown; |
| /* where we are */ |
| OSSL_STATEM statem; |
| |
| BUF_MEM *init_buf; /* buffer used during init */ |
| void *init_msg; /* pointer to handshake message body, set by |
| * ssl3_get_message() */ |
| int init_num; /* amount read/written */ |
| int init_off; /* amount read/written */ |
| |
| struct ssl3_state_st *s3; /* SSLv3 variables */ |
| struct dtls1_state_st *d1; /* DTLSv1 variables */ |
| |
| /* callback that allows applications to peek at protocol messages */ |
| void (*msg_callback) (int write_p, int version, int content_type, |
| const void *buf, size_t len, SSL *ssl, void *arg); |
| void *msg_callback_arg; |
| int hit; /* reusing a previous session */ |
| X509_VERIFY_PARAM *param; |
| |
| /* Per connection DANE state */ |
| struct dane_st dane; |
| |
| /* crypto */ |
| STACK_OF(SSL_CIPHER) *cipher_list; |
| STACK_OF(SSL_CIPHER) *cipher_list_by_id; |
| /* |
| * These are the ones being used, the ones in SSL_SESSION are the ones to |
| * be 'copied' into these ones |
| */ |
| uint32_t mac_flags; |
| EVP_CIPHER_CTX *enc_read_ctx; /* cryptographic state */ |
| EVP_MD_CTX *read_hash; /* used for mac generation */ |
| COMP_CTX *compress; /* compression */ |
| COMP_CTX *expand; /* uncompress */ |
| EVP_CIPHER_CTX *enc_write_ctx; /* cryptographic state */ |
| EVP_MD_CTX *write_hash; /* used for mac generation */ |
| /* session info */ |
| /* client cert? */ |
| /* This is used to hold the server certificate used */ |
| struct cert_st /* CERT */ *cert; |
| /* |
| * the session_id_context is used to ensure sessions are only reused in |
| * the appropriate context |
| */ |
| unsigned int sid_ctx_length; |
| unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; |
| /* This can also be in the session once a session is established */ |
| SSL_SESSION *session; |
| /* Default generate session ID callback. */ |
| GEN_SESSION_CB generate_session_id; |
| /* Used in SSL3 */ |
| /* |
| * 0 don't care about verify failure. |
| * 1 fail if verify fails |
| */ |
| uint32_t verify_mode; |
| /* fail if callback returns 0 */ |
| int (*verify_callback) (int ok, X509_STORE_CTX *ctx); |
| /* optional informational callback */ |
| void (*info_callback) (const SSL *ssl, int type, int val); |
| /* error bytes to be written */ |
| int error; |
| /* actual code */ |
| int error_code; |
| # ifndef OPENSSL_NO_PSK |
| unsigned int (*psk_client_callback) (SSL *ssl, const char *hint, |
| char *identity, |
| unsigned int max_identity_len, |
| unsigned char *psk, |
| unsigned int max_psk_len); |
| unsigned int (*psk_server_callback) (SSL *ssl, const char *identity, |
| unsigned char *psk, |
| unsigned int max_psk_len); |
| # endif |
| SSL_CTX *ctx; |
| /* extra application data */ |
| long verify_result; |
| CRYPTO_EX_DATA ex_data; |
| /* for server side, keep the list of CA_dn we can use */ |
| STACK_OF(X509_NAME) *client_CA; |
| int references; |
| /* protocol behaviour */ |
| uint32_t options; |
| /* API behaviour */ |
| uint32_t mode; |
| int min_proto_version; |
| int max_proto_version; |
| long max_cert_list; |
| int first_packet; |
| /* what was passed, used for SSLv3/TLS rollback check */ |
| int client_version; |
| unsigned int max_send_fragment; |
| |
| /* TLS extension debug callback */ |
| void (*tlsext_debug_cb) (SSL *s, int client_server, int type, |
| unsigned char *data, int len, void *arg); |
| void *tlsext_debug_arg; |
| char *tlsext_hostname; |
| /*- |
| * no further mod of servername |
| * 0 : call the servername extension callback. |
| * 1 : prepare 2, allow last ack just after in server callback. |
| * 2 : don't call servername callback, no ack in server hello |
| */ |
| int servername_done; |
| /* certificate status request info */ |
| /* Status type or -1 if no status type */ |
| int tlsext_status_type; |
| /* Expect OCSP CertificateStatus message */ |
| int tlsext_status_expected; |
| /* OCSP status request only */ |
| STACK_OF(OCSP_RESPID) *tlsext_ocsp_ids; |
| X509_EXTENSIONS *tlsext_ocsp_exts; |
| /* OCSP response received or to be sent */ |
| unsigned char *tlsext_ocsp_resp; |
| int tlsext_ocsp_resplen; |
| /* RFC4507 session ticket expected to be received or sent */ |
| int tlsext_ticket_expected; |
| # ifndef OPENSSL_NO_EC |
| size_t tlsext_ecpointformatlist_length; |
| /* our list */ |
| unsigned char *tlsext_ecpointformatlist; |
| size_t tlsext_ellipticcurvelist_length; |
| /* our list */ |
| unsigned char *tlsext_ellipticcurvelist; |
| # endif /* OPENSSL_NO_EC */ |
| /* TLS Session Ticket extension override */ |
| TLS_SESSION_TICKET_EXT *tlsext_session_ticket; |
| /* TLS Session Ticket extension callback */ |
| tls_session_ticket_ext_cb_fn tls_session_ticket_ext_cb; |
| void *tls_session_ticket_ext_cb_arg; |
| /* TLS pre-shared secret session resumption */ |
| tls_session_secret_cb_fn tls_session_secret_cb; |
| void *tls_session_secret_cb_arg; |
| SSL_CTX *initial_ctx; /* initial ctx, used to store sessions */ |
| # ifndef OPENSSL_NO_NEXTPROTONEG |
| /* |
| * Next protocol negotiation. For the client, this is the protocol that |
| * we sent in NextProtocol and is set when handling ServerHello |
| * extensions. For a server, this is the client's selected_protocol from |
| * NextProtocol and is set when handling the NextProtocol message, before |
| * the Finished message. |
| */ |
| unsigned char *next_proto_negotiated; |
| unsigned char next_proto_negotiated_len; |
| # endif |
| # define session_ctx initial_ctx |
| /* What we'll do */ |
| STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; |
| /* What's been chosen */ |
| SRTP_PROTECTION_PROFILE *srtp_profile; |
| /*- |
| * Is use of the Heartbeat extension negotiated? |
| * 0: disabled |
| * 1: enabled |
| * 2: enabled, but not allowed to send Requests |
| */ |
| unsigned int tlsext_heartbeat; |
| /* Indicates if a HeartbeatRequest is in flight */ |
| unsigned int tlsext_hb_pending; |
| /* HeartbeatRequest sequence number */ |
| unsigned int tlsext_hb_seq; |
| /* |
| * For a client, this contains the list of supported protocols in wire |
| * format. |
| */ |
| unsigned char *alpn_client_proto_list; |
| unsigned alpn_client_proto_list_len; |
| |
| /*- |
| * 1 if we are renegotiating. |
| * 2 if we are a server and are inside a handshake |
| * (i.e. not just sending a HelloRequest) |
| */ |
| int renegotiate; |
| # ifndef OPENSSL_NO_SRP |
| /* ctx for SRP authentication */ |
| SRP_CTX srp_ctx; |
| # endif |
| /* |
| * Callback for disabling session caching and ticket support on a session |
| * basis, depending on the chosen cipher. |
| */ |
| int (*not_resumable_session_cb) (SSL *ssl, int is_forward_secure); |
| |
| RECORD_LAYER rlayer; |
| |
| /* Default password callback. */ |
| pem_password_cb *default_passwd_callback; |
| |
| /* Default password callback user data. */ |
| void *default_passwd_callback_userdata; |
| |
| /* Async Job info */ |
| ASYNC_JOB *job; |
| }; |
| |
| |
| typedef struct ssl3_state_st { |
| long flags; |
| int read_mac_secret_size; |
| unsigned char read_mac_secret[EVP_MAX_MD_SIZE]; |
| int write_mac_secret_size; |
| unsigned char write_mac_secret[EVP_MAX_MD_SIZE]; |
| unsigned char server_random[SSL3_RANDOM_SIZE]; |
| unsigned char client_random[SSL3_RANDOM_SIZE]; |
| /* flags for countermeasure against known-IV weakness */ |
| int need_empty_fragments; |
| int empty_fragment_done; |
| /* used during startup, digest all incoming/outgoing packets */ |
| BIO *handshake_buffer; |
| /* |
| * When handshake digest is determined, buffer is hashed and |
| * freed and MD_CTX for the required digest is stored here. |
| */ |
| EVP_MD_CTX *handshake_dgst; |
| /* |
| * Set whenever an expected ChangeCipherSpec message is processed. |
| * Unset when the peer's Finished message is received. |
| * Unexpected ChangeCipherSpec messages trigger a fatal alert. |
| */ |
| int change_cipher_spec; |
| int warn_alert; |
| int fatal_alert; |
| /* |
| * we allow one fatal and one warning alert to be outstanding, send close |
| * alert via the warning alert |
| */ |
| int alert_dispatch; |
| unsigned char send_alert[2]; |
| /* |
| * This flag is set when we should renegotiate ASAP, basically when there |
| * is no more data in the read or write buffers |
| */ |
| int renegotiate; |
| int total_renegotiations; |
| int num_renegotiations; |
| int in_read_app_data; |
| struct { |
| /* actually only need to be 16+20 for SSLv3 and 12 for TLS */ |
| unsigned char finish_md[EVP_MAX_MD_SIZE * 2]; |
| int finish_md_len; |
| unsigned char peer_finish_md[EVP_MAX_MD_SIZE * 2]; |
| int peer_finish_md_len; |
| unsigned long message_size; |
| int message_type; |
| /* used to hold the new cipher we are going to use */ |
| const SSL_CIPHER *new_cipher; |
| # if !defined(OPENSSL_NO_EC) || !defined(OPENSSL_NO_DH) |
| EVP_PKEY *pkey; /* holds short lived DH/ECDH key */ |
| # endif |
| /* used for certificate requests */ |
| int cert_req; |
| int ctype_num; |
| char ctype[SSL3_CT_NUMBER]; |
| STACK_OF(X509_NAME) *ca_names; |
| int key_block_length; |
| unsigned char *key_block; |
| const EVP_CIPHER *new_sym_enc; |
| const EVP_MD *new_hash; |
| int new_mac_pkey_type; |
| int new_mac_secret_size; |
| # ifndef OPENSSL_NO_COMP |
| const SSL_COMP *new_compression; |
| # else |
| char *new_compression; |
| # endif |
| int cert_request; |
| /* Raw values of the cipher list from a client */ |
| unsigned char *ciphers_raw; |
| size_t ciphers_rawlen; |
| /* Temporary storage for premaster secret */ |
| unsigned char *pms; |
| size_t pmslen; |
| #ifndef OPENSSL_NO_PSK |
| /* Temporary storage for PSK key */ |
| unsigned char *psk; |
| size_t psklen; |
| #endif |
| /* |
| * signature algorithms peer reports: e.g. supported signature |
| * algorithms extension for server or as part of a certificate |
| * request for client. |
| */ |
| unsigned char *peer_sigalgs; |
| /* Size of above array */ |
| size_t peer_sigalgslen; |
| /* Digest peer uses for signing */ |
| const EVP_MD *peer_md; |
| /* Array of digests used for signing */ |
| const EVP_MD *md[SSL_PKEY_NUM]; |
| /* |
| * Set if corresponding CERT_PKEY can be used with current |
| * SSL session: e.g. appropriate curve, signature algorithms etc. |
| * If zero it can't be used at all. |
| */ |
| uint32_t valid_flags[SSL_PKEY_NUM]; |
| /* |
| * For servers the following masks are for the key and auth algorithms |
| * that are supported by the certs below. For clients they are masks of |
| * *disabled* algorithms based on the current session. |
| */ |
| uint32_t mask_k; |
| uint32_t mask_a; |
| /* Client only */ |
| uint32_t mask_ssl; |
| } tmp; |
| |
| /* Connection binding to prevent renegotiation attacks */ |
| unsigned char previous_client_finished[EVP_MAX_MD_SIZE]; |
| unsigned char previous_client_finished_len; |
| unsigned char previous_server_finished[EVP_MAX_MD_SIZE]; |
| unsigned char previous_server_finished_len; |
| int send_connection_binding; /* TODOEKR */ |
| |
| # ifndef OPENSSL_NO_NEXTPROTONEG |
| /* |
| * Set if we saw the Next Protocol Negotiation extension from our peer. |
| */ |
| int next_proto_neg_seen; |
| # endif |
| |
| /* |
| * ALPN information (we are in the process of transitioning from NPN to |
| * ALPN.) |
| */ |
| |
| /* |
| * In a server these point to the selected ALPN protocol after the |
| * ClientHello has been processed. In a client these contain the protocol |
| * that the server selected once the ServerHello has been processed. |
| */ |
| unsigned char *alpn_selected; |
| unsigned alpn_selected_len; |
| |
| # ifndef OPENSSL_NO_EC |
| /* |
| * This is set to true if we believe that this is a version of Safari |
| * running on OS X 10.6 or newer. We wish to know this because Safari on |
| * 10.8 .. 10.8.3 has broken ECDHE-ECDSA support. |
| */ |
| char is_probably_safari; |
| # endif /* !OPENSSL_NO_EC */ |
| |
| /* For clients: peer temporary key */ |
| # if !defined(OPENSSL_NO_EC) || !defined(OPENSSL_NO_DH) |
| EVP_PKEY *peer_tmp; |
| # endif |
| |
| } SSL3_STATE; |
| |
| |
| /* DTLS structures */ |
| |
| # ifndef OPENSSL_NO_SCTP |
| # define DTLS1_SCTP_AUTH_LABEL "EXPORTER_DTLS_OVER_SCTP" |
| # endif |
| |
| /* Max MTU overhead we know about so far is 40 for IPv6 + 8 for UDP */ |
| # define DTLS1_MAX_MTU_OVERHEAD 48 |
| |
| /* |
| * Flag used in message reuse to indicate the buffer contains the record |
| * header as well as the the handshake message header. |
| */ |
| # define DTLS1_SKIP_RECORD_HEADER 2 |
| |
| struct dtls1_retransmit_state { |
| EVP_CIPHER_CTX *enc_write_ctx; /* cryptographic state */ |
| EVP_MD_CTX *write_hash; /* used for mac generation */ |
| COMP_CTX *compress; /* compression */ |
| SSL_SESSION *session; |
| unsigned short epoch; |
| }; |
| |
| struct hm_header_st { |
| unsigned char type; |
| unsigned long msg_len; |
| unsigned short seq; |
| unsigned long frag_off; |
| unsigned long frag_len; |
| unsigned int is_ccs; |
| struct dtls1_retransmit_state saved_retransmit_state; |
| }; |
| |
| struct dtls1_timeout_st { |
| /* Number of read timeouts so far */ |
| unsigned int read_timeouts; |
| /* Number of write timeouts so far */ |
| unsigned int write_timeouts; |
| /* Number of alerts received so far */ |
| unsigned int num_alerts; |
| }; |
| |
| typedef struct hm_fragment_st { |
| struct hm_header_st msg_header; |
| unsigned char *fragment; |
| unsigned char *reassembly; |
| } hm_fragment; |
| |
| typedef struct dtls1_state_st { |
| unsigned char cookie[DTLS1_COOKIE_LENGTH]; |
| unsigned int cookie_len; |
| unsigned int cookie_verified; |
| |
| /* handshake message numbers */ |
| unsigned short handshake_write_seq; |
| unsigned short next_handshake_write_seq; |
| unsigned short handshake_read_seq; |
| |
| /* Buffered handshake messages */ |
| pqueue buffered_messages; |
| /* Buffered (sent) handshake records */ |
| pqueue sent_messages; |
| |
| unsigned int link_mtu; /* max on-the-wire DTLS packet size */ |
| unsigned int mtu; /* max DTLS packet size */ |
| struct hm_header_st w_msg_hdr; |
| struct hm_header_st r_msg_hdr; |
| struct dtls1_timeout_st timeout; |
| /* |
| * Indicates when the last handshake msg or heartbeat sent will timeout |
| */ |
| struct timeval next_timeout; |
| /* Timeout duration */ |
| unsigned short timeout_duration; |
| |
| unsigned int retransmitting; |
| # ifndef OPENSSL_NO_SCTP |
| int shutdown_received; |
| # endif |
| } DTLS1_STATE; |
| |
| |
| |
| # ifndef OPENSSL_NO_EC |
| /* |
| * From ECC-TLS draft, used in encoding the curve type in ECParameters |
| */ |
| # define EXPLICIT_PRIME_CURVE_TYPE 1 |
| # define EXPLICIT_CHAR2_CURVE_TYPE 2 |
| # define NAMED_CURVE_TYPE 3 |
| # endif /* OPENSSL_NO_EC */ |
| |
| typedef struct cert_pkey_st { |
| X509 *x509; |
| EVP_PKEY *privatekey; |
| /* Chain for this certificate */ |
| STACK_OF(X509) *chain; |
| |
| /*- |
| * serverinfo data for this certificate. The data is in TLS Extension |
| * wire format, specifically it's a series of records like: |
| * uint16_t extension_type; // (RFC 5246, 7.4.1.4, Extension) |
| * uint16_t length; |
| * uint8_t data[length]; |
| */ |
| unsigned char *serverinfo; |
| size_t serverinfo_length; |
| } CERT_PKEY; |
| /* Retrieve Suite B flags */ |
| # define tls1_suiteb(s) (s->cert->cert_flags & SSL_CERT_FLAG_SUITEB_128_LOS) |
| /* Uses to check strict mode: suite B modes are always strict */ |
| # define SSL_CERT_FLAGS_CHECK_TLS_STRICT \ |
| (SSL_CERT_FLAG_SUITEB_128_LOS|SSL_CERT_FLAG_TLS_STRICT) |
| |
| typedef struct { |
| unsigned short ext_type; |
| /* |
| * Per-connection flags relating to this extension type: not used if |
| * part of an SSL_CTX structure. |
| */ |
| uint32_t ext_flags; |
| custom_ext_add_cb add_cb; |
| custom_ext_free_cb free_cb; |
| void *add_arg; |
| custom_ext_parse_cb parse_cb; |
| void *parse_arg; |
| } custom_ext_method; |
| |
| /* ext_flags values */ |
| |
| /* |
| * Indicates an extension has been received. Used to check for unsolicited or |
| * duplicate extensions. |
| */ |
| # define SSL_EXT_FLAG_RECEIVED 0x1 |
| /* |
| * Indicates an extension has been sent: used to enable sending of |
| * corresponding ServerHello extension. |
| */ |
| # define SSL_EXT_FLAG_SENT 0x2 |
| |
| typedef struct { |
| custom_ext_method *meths; |
| size_t meths_count; |
| } custom_ext_methods; |
| |
| typedef struct cert_st { |
| /* Current active set */ |
| /* |
| * ALWAYS points to an element of the pkeys array |
| * Probably it would make more sense to store |
| * an index, not a pointer. |
| */ |
| CERT_PKEY *key; |
| # ifndef OPENSSL_NO_DH |
| EVP_PKEY *dh_tmp; |
| DH *(*dh_tmp_cb) (SSL *ssl, int is_export, int keysize); |
| int dh_tmp_auto; |
| # endif |
| /* Flags related to certificates */ |
| uint32_t cert_flags; |
| CERT_PKEY pkeys[SSL_PKEY_NUM]; |
| /* |
| * Certificate types (received or sent) in certificate request message. |
| * On receive this is only set if number of certificate types exceeds |
| * SSL3_CT_NUMBER. |
| */ |
| unsigned char *ctypes; |
| size_t ctype_num; |
| /* |
| * suppported signature algorithms. When set on a client this is sent in |
| * the client hello as the supported signature algorithms extension. For |
| * servers it represents the signature algorithms we are willing to use. |
| */ |
| unsigned char *conf_sigalgs; |
| /* Size of above array */ |
| size_t conf_sigalgslen; |
| /* |
| * Client authentication signature algorithms, if not set then uses |
| * conf_sigalgs. On servers these will be the signature algorithms sent |
| * to the client in a cerificate request for TLS 1.2. On a client this |
| * represents the signature algortithms we are willing to use for client |
| * authentication. |
| */ |
| unsigned char *client_sigalgs; |
| /* Size of above array */ |
| size_t client_sigalgslen; |
| /* |
| * Signature algorithms shared by client and server: cached because these |
| * are used most often. |
| */ |
| TLS_SIGALGS *shared_sigalgs; |
| size_t shared_sigalgslen; |
| /* |
| * Certificate setup callback: if set is called whenever a certificate |
| * may be required (client or server). the callback can then examine any |
| * appropriate parameters and setup any certificates required. This |
| * allows advanced applications to select certificates on the fly: for |
| * example based on supported signature algorithms or curves. |
| */ |
| int (*cert_cb) (SSL *ssl, void *arg); |
| void *cert_cb_arg; |
| /* |
| * Optional X509_STORE for chain building or certificate validation If |
| * NULL the parent SSL_CTX store is used instead. |
| */ |
| X509_STORE *chain_store; |
| X509_STORE *verify_store; |
| /* Custom extension methods for server and client */ |
| custom_ext_methods cli_ext; |
| custom_ext_methods srv_ext; |
| /* Security callback */ |
| int (*sec_cb) (SSL *s, SSL_CTX *ctx, int op, int bits, int nid, |
| void *other, void *ex); |
| /* Security level */ |
| int sec_level; |
| void *sec_ex; |
| #ifndef OPENSSL_NO_PSK |
| /* If not NULL psk identity hint to use for servers */ |
| char *psk_identity_hint; |
| #endif |
| int references; /* >1 only if SSL_copy_session_id is used */ |
| } CERT; |
| |
| /* Structure containing decoded values of signature algorithms extension */ |
| struct tls_sigalgs_st { |
| /* NID of hash algorithm */ |
| int hash_nid; |
| /* NID of signature algorithm */ |
| int sign_nid; |
| /* Combined hash and signature NID */ |
| int signandhash_nid; |
| /* Raw values used in extension */ |
| unsigned char rsign; |
| unsigned char rhash; |
| }; |
| |
| /* |
| * #define MAC_DEBUG |
| */ |
| |
| /* |
| * #define ERR_DEBUG |
| */ |
| /* |
| * #define ABORT_DEBUG |
| */ |
| /* |
| * #define PKT_DEBUG 1 |
| */ |
| /* |
| * #define DES_DEBUG |
| */ |
| /* |
| * #define DES_OFB_DEBUG |
| */ |
| /* |
| * #define SSL_DEBUG |
| */ |
| /* |
| * #define RSA_DEBUG |
| */ |
| /* |
| * #define IDEA_DEBUG |
| */ |
| |
| # define FP_ICC (int (*)(const void *,const void *)) |
| |
| /* |
| * This is for the SSLv3/TLSv1.0 differences in crypto/hash stuff It is a bit |
| * of a mess of functions, but hell, think of it as an opaque structure :-) |
| */ |
| typedef struct ssl3_enc_method { |
| int (*enc) (SSL *, int); |
| int (*mac) (SSL *, unsigned char *, int); |
| int (*setup_key_block) (SSL *); |
| int (*generate_master_secret) (SSL *, unsigned char *, unsigned char *, |
| int); |
| int (*change_cipher_state) (SSL *, int); |
| int (*final_finish_mac) (SSL *, const char *, int, unsigned char *); |
| int finish_mac_length; |
| const char *client_finished_label; |
| int client_finished_label_len; |
| const char *server_finished_label; |
| int server_finished_label_len; |
| int (*alert_value) (int); |
| int (*export_keying_material) (SSL *, unsigned char *, size_t, |
| const char *, size_t, |
| const unsigned char *, size_t, |
| int use_context); |
| /* Various flags indicating protocol version requirements */ |
| uint32_t enc_flags; |
| /* Handshake header length */ |
| unsigned int hhlen; |
| /* Set the handshake header */ |
| int (*set_handshake_header) (SSL *s, int type, unsigned long len); |
| /* Write out handshake message */ |
| int (*do_write) (SSL *s); |
| } SSL3_ENC_METHOD; |
| |
| # define SSL_HM_HEADER_LENGTH(s) s->method->ssl3_enc->hhlen |
| # define ssl_handshake_start(s) \ |
| (((unsigned char *)s->init_buf->data) + s->method->ssl3_enc->hhlen) |
| # define ssl_set_handshake_header(s, htype, len) \ |
| s->method->ssl3_enc->set_handshake_header(s, htype, len) |
| # define ssl_do_write(s) s->method->ssl3_enc->do_write(s) |
| |
| /* Values for enc_flags */ |
| |
| /* Uses explicit IV for CBC mode */ |
| # define SSL_ENC_FLAG_EXPLICIT_IV 0x1 |
| /* Uses signature algorithms extension */ |
| # define SSL_ENC_FLAG_SIGALGS 0x2 |
| /* Uses SHA256 default PRF */ |
| # define SSL_ENC_FLAG_SHA256_PRF 0x4 |
| /* Is DTLS */ |
| # define SSL_ENC_FLAG_DTLS 0x8 |
| /* |
| * Allow TLS 1.2 ciphersuites: applies to DTLS 1.2 as well as TLS 1.2: may |
| * apply to others in future. |
| */ |
| # define SSL_ENC_FLAG_TLS1_2_CIPHERS 0x10 |
| |
| # ifndef OPENSSL_NO_COMP |
| /* Used for holding the relevant compression methods loaded into SSL_CTX */ |
| typedef struct ssl3_comp_st { |
| int comp_id; /* The identifier byte for this compression |
| * type */ |
| char *name; /* Text name used for the compression type */ |
| COMP_METHOD *method; /* The method :-) */ |
| } SSL3_COMP; |
| # endif |
| |
| extern SSL3_ENC_METHOD ssl3_undef_enc_method; |
| OPENSSL_EXTERN const SSL_CIPHER ssl3_ciphers[]; |
| |
| SSL_METHOD *ssl_bad_method(int ver); |
| |
| extern const SSL3_ENC_METHOD TLSv1_enc_data; |
| extern const SSL3_ENC_METHOD TLSv1_1_enc_data; |
| extern const SSL3_ENC_METHOD TLSv1_2_enc_data; |
| extern const SSL3_ENC_METHOD SSLv3_enc_data; |
| extern const SSL3_ENC_METHOD DTLSv1_enc_data; |
| extern const SSL3_ENC_METHOD DTLSv1_2_enc_data; |
| |
| /* |
| * Flags for SSL methods |
| */ |
| #define SSL_METHOD_NO_FIPS (1U<<0) |
| #define SSL_METHOD_NO_SUITEB (1U<<1) |
| |
| # define IMPLEMENT_tls_meth_func(version, flags, mask, func_name, s_accept, \ |
| s_connect, s_get_meth, enc_data) \ |
| const SSL_METHOD *func_name(void) \ |
| { \ |
| static const SSL_METHOD func_name##_data= { \ |
| version, \ |
| flags, \ |
| mask, \ |
| tls1_new, \ |
| tls1_clear, \ |
| tls1_free, \ |
| s_accept, \ |
| s_connect, \ |
| ssl3_read, \ |
| ssl3_peek, \ |
| ssl3_write, \ |
| ssl3_shutdown, \ |
| ssl3_renegotiate, \ |
| ssl3_renegotiate_check, \ |
| ssl3_read_bytes, \ |
| ssl3_write_bytes, \ |
| ssl3_dispatch_alert, \ |
| ssl3_ctrl, \ |
| ssl3_ctx_ctrl, \ |
| ssl3_get_cipher_by_char, \ |
| ssl3_put_cipher_by_char, \ |
| ssl3_pending, \ |
| ssl3_num_ciphers, \ |
| ssl3_get_cipher, \ |
| s_get_meth, \ |
| tls1_default_timeout, \ |
| &enc_data, \ |
| ssl_undefined_void_function, \ |
| ssl3_callback_ctrl, \ |
| ssl3_ctx_callback_ctrl, \ |
| }; \ |
| return &func_name##_data; \ |
| } |
| |
| # define IMPLEMENT_ssl3_meth_func(func_name, s_accept, s_connect, s_get_meth) \ |
| const SSL_METHOD *func_name(void) \ |
| { \ |
| static const SSL_METHOD func_name##_data= { \ |
| SSL3_VERSION, \ |
| SSL_METHOD_NO_FIPS | SSL_METHOD_NO_SUITEB, \ |
| SSL_OP_NO_SSLv3, \ |
| ssl3_new, \ |
| ssl3_clear, \ |
| ssl3_free, \ |
| s_accept, \ |
| s_connect, \ |
| ssl3_read, \ |
| ssl3_peek, \ |
| ssl3_write, \ |
| ssl3_shutdown, \ |
| ssl3_renegotiate, \ |
| ssl3_renegotiate_check, \ |
| ssl3_read_bytes, \ |
| ssl3_write_bytes, \ |
| ssl3_dispatch_alert, \ |
| ssl3_ctrl, \ |
| ssl3_ctx_ctrl, \ |
| ssl3_get_cipher_by_char, \ |
| ssl3_put_cipher_by_char, \ |
| ssl3_pending, \ |
| ssl3_num_ciphers, \ |
| ssl3_get_cipher, \ |
| s_get_meth, \ |
| ssl3_default_timeout, \ |
| &SSLv3_enc_data, \ |
| ssl_undefined_void_function, \ |
| ssl3_callback_ctrl, \ |
| ssl3_ctx_callback_ctrl, \ |
| }; \ |
| return &func_name##_data; \ |
| } |
| |
| # define IMPLEMENT_dtls1_meth_func(version, flags, mask, func_name, s_accept, \ |
| s_connect, s_get_meth, enc_data) \ |
| const SSL_METHOD *func_name(void) \ |
| { \ |
| static const SSL_METHOD func_name##_data= { \ |
| version, \ |
| flags, \ |
| mask, \ |
| dtls1_new, \ |
| dtls1_clear, \ |
| dtls1_free, \ |
| s_accept, \ |
| s_connect, \ |
| ssl3_read, \ |
| ssl3_peek, \ |
| ssl3_write, \ |
| dtls1_shutdown, \ |
| ssl3_renegotiate, \ |
| ssl3_renegotiate_check, \ |
| dtls1_read_bytes, \ |
| dtls1_write_app_data_bytes, \ |
| dtls1_dispatch_alert, \ |
| dtls1_ctrl, \ |
| ssl3_ctx_ctrl, \ |
| ssl3_get_cipher_by_char, \ |
| ssl3_put_cipher_by_char, \ |
| ssl3_pending, \ |
| ssl3_num_ciphers, \ |
| dtls1_get_cipher, \ |
| s_get_meth, \ |
| dtls1_default_timeout, \ |
| &enc_data, \ |
| ssl_undefined_void_function, \ |
| ssl3_callback_ctrl, \ |
| ssl3_ctx_callback_ctrl, \ |
| }; \ |
| return &func_name##_data; \ |
| } |
| |
| struct openssl_ssl_test_functions { |
| int (*p_ssl_init_wbio_buffer) (SSL *s, int push); |
| int (*p_ssl3_setup_buffers) (SSL *s); |
| int (*p_tls1_process_heartbeat) (SSL *s, |
| unsigned char *p, unsigned int length); |
| int (*p_dtls1_process_heartbeat) (SSL *s, |
| unsigned char *p, unsigned int length); |
| }; |
| |
| # ifndef OPENSSL_UNIT_TEST |
| |
| void ssl_clear_cipher_ctx(SSL *s); |
| int ssl_clear_bad_session(SSL *s); |
| __owur CERT *ssl_cert_new(void); |
| __owur CERT *ssl_cert_dup(CERT *cert); |
| void ssl_cert_clear_certs(CERT *c); |
| void ssl_cert_free(CERT *c); |
| __owur int ssl_get_new_session(SSL *s, int session); |
| __owur int ssl_get_prev_session(SSL *s, const PACKET *ext, |
| const PACKET *session_id); |
| __owur SSL_SESSION *ssl_session_dup(SSL_SESSION *src, int ticket); |
| __owur int ssl_cipher_id_cmp(const SSL_CIPHER *a, const SSL_CIPHER *b); |
| DECLARE_OBJ_BSEARCH_GLOBAL_CMP_FN(SSL_CIPHER, SSL_CIPHER, ssl_cipher_id); |
| __owur int ssl_cipher_ptr_id_cmp(const SSL_CIPHER *const *ap, |
| const SSL_CIPHER *const *bp); |
| __owur STACK_OF(SSL_CIPHER) *ssl_create_cipher_list(const SSL_METHOD *meth, |
| STACK_OF(SSL_CIPHER) **pref, |
| STACK_OF(SSL_CIPHER) **sorted, |
| const char *rule_str, CERT *c); |
| void ssl_update_cache(SSL *s, int mode); |
| __owur int ssl_cipher_get_evp(const SSL_SESSION *s, const EVP_CIPHER **enc, |
| const EVP_MD **md, int *mac_pkey_type, |
| int *mac_secret_size, SSL_COMP **comp, int use_etm); |
| __owur int ssl_cipher_get_cert_index(const SSL_CIPHER *c); |
| __owur const SSL_CIPHER *ssl_get_cipher_by_char(SSL *ssl, const unsigned char *ptr); |
| __owur int ssl_cert_set0_chain(SSL *s, SSL_CTX *ctx, STACK_OF(X509) *chain); |
| __owur int ssl_cert_set1_chain(SSL *s, SSL_CTX *ctx, STACK_OF(X509) *chain); |
| __owur int ssl_cert_add0_chain_cert(SSL *s, SSL_CTX *ctx, X509 *x); |
| __owur int ssl_cert_add1_chain_cert(SSL *s, SSL_CTX *ctx, X509 *x); |
| __owur int ssl_cert_select_current(CERT *c, X509 *x); |
| __owur int ssl_cert_set_current(CERT *c, long arg); |
| __owur X509 *ssl_cert_get0_next_certificate(CERT *c, int first); |
| void ssl_cert_set_cert_cb(CERT *c, int (*cb) (SSL *ssl, void *arg), |
| void *arg); |
| |
| __owur int ssl_verify_cert_chain(SSL *s, STACK_OF(X509) *sk); |
| __owur int ssl_add_cert_chain(SSL *s, CERT_PKEY *cpk, unsigned long *l); |
| __owur int ssl_build_cert_chain(SSL *s, SSL_CTX *ctx, int flags); |
| __owur int ssl_cert_set_cert_store(CERT *c, X509_STORE *store, int chain, int ref); |
| |
| __owur int ssl_security(SSL *s, int op, int bits, int nid, void *other); |
| __owur int ssl_ctx_security(SSL_CTX *ctx, int op, int bits, int nid, void *other); |
| |
| int ssl_undefined_function(SSL *s); |
| __owur int ssl_undefined_void_function(void); |
| __owur int ssl_undefined_const_function(const SSL *s); |
| __owur CERT_PKEY *ssl_get_server_send_pkey(SSL *s); |
| __owur int ssl_get_server_cert_serverinfo(SSL *s, const unsigned char **serverinfo, |
| size_t *serverinfo_length); |
| __owur EVP_PKEY *ssl_get_sign_pkey(SSL *s, const SSL_CIPHER *c, const EVP_MD **pmd); |
| __owur int ssl_cert_type(X509 *x, EVP_PKEY *pkey); |
| void ssl_set_masks(SSL *s, const SSL_CIPHER *cipher); |
| __owur STACK_OF(SSL_CIPHER) *ssl_get_ciphers_by_id(SSL *s); |
| __owur int ssl_verify_alarm_type(long type); |
| void ssl_load_ciphers(void); |
| __owur int ssl_fill_hello_random(SSL *s, int server, unsigned char *field, int len); |
| __owur int ssl_generate_master_secret(SSL *s, unsigned char *pms, size_t pmslen, |
| int free_pms); |
| __owur EVP_PKEY *ssl_generate_pkey(EVP_PKEY *pm, int nid); |
| __owur int ssl_derive(SSL *s, EVP_PKEY *privkey, EVP_PKEY *pubkey); |
| __owur EVP_PKEY *ssl_dh_to_pkey(DH *dh); |
| |
| __owur const SSL_CIPHER *ssl3_get_cipher_by_char(const unsigned char *p); |
| __owur int ssl3_put_cipher_by_char(const SSL_CIPHER *c, unsigned char *p); |
| void ssl3_init_finished_mac(SSL *s); |
| __owur int ssl3_setup_key_block(SSL *s); |
| __owur int ssl3_change_cipher_state(SSL *s, int which); |
| void ssl3_cleanup_key_block(SSL *s); |
| __owur int ssl3_do_write(SSL *s, int type); |
| int ssl3_send_alert(SSL *s, int level, int desc); |
| __owur int ssl3_generate_master_secret(SSL *s, unsigned char *out, |
| unsigned char *p, int len); |
| __owur int ssl3_get_req_cert_type(SSL *s, unsigned char *p); |
| __owur int ssl3_num_ciphers(void); |
| __owur const SSL_CIPHER *ssl3_get_cipher(unsigned int u); |
| int ssl3_renegotiate(SSL *ssl); |
| int ssl3_renegotiate_check(SSL *ssl); |
| __owur int ssl3_dispatch_alert(SSL *s); |
| __owur int ssl3_final_finish_mac(SSL *s, const char *sender, int slen, |
| unsigned char *p); |
| void ssl3_finish_mac(SSL *s, const unsigned char *buf, int len); |
| void ssl3_free_digest_list(SSL *s); |
| __owur unsigned long ssl3_output_cert_chain(SSL *s, CERT_PKEY *cpk); |
| __owur const SSL_CIPHER *ssl3_choose_cipher(SSL *ssl, |
| STACK_OF(SSL_CIPHER) *clnt, |
| STACK_OF(SSL_CIPHER) *srvr); |
| __owur int ssl3_digest_cached_records(SSL *s, int keep); |
| __owur int ssl3_new(SSL *s); |
| void ssl3_free(SSL *s); |
| __owur int ssl3_read(SSL *s, void *buf, int len); |
| __owur int ssl3_peek(SSL *s, void *buf, int len); |
| __owur int ssl3_write(SSL *s, const void *buf, int len); |
| __owur int ssl3_shutdown(SSL *s); |
| void ssl3_clear(SSL *s); |
| __owur long ssl3_ctrl(SSL *s, int cmd, long larg, void *parg); |
| __owur long ssl3_ctx_ctrl(SSL_CTX *s, int cmd, long larg, void *parg); |
| __owur long ssl3_callback_ctrl(SSL *s, int cmd, void (*fp) (void)); |
| __owur long ssl3_ctx_callback_ctrl(SSL_CTX *s, int cmd, void (*fp) (void)); |
| |
| __owur int ssl3_do_change_cipher_spec(SSL *ssl); |
| __owur long ssl3_default_timeout(void); |
| |
| __owur int ssl3_set_handshake_header(SSL *s, int htype, unsigned long len); |
| __owur int ssl3_handshake_write(SSL *s); |
| |
| __owur int ssl_allow_compression(SSL *s); |
| |
| __owur int ssl_set_client_hello_version(SSL *s); |
| __owur int ssl_check_version_downgrade(SSL *s); |
| __owur int ssl_set_version_bound(int method_version, int version, int *bound); |
| __owur int ssl_choose_server_version(SSL *s); |
| __owur int ssl_choose_client_version(SSL *s, int version); |
| |
| __owur long tls1_default_timeout(void); |
| __owur int dtls1_do_write(SSL *s, int type); |
| void dtls1_set_message_header(SSL *s, |
| unsigned char *p, unsigned char mt, |
| unsigned long len, |
| unsigned long frag_off, |
| unsigned long frag_len); |
| |
| __owur int dtls1_write_app_data_bytes(SSL *s, int type, const void *buf, int len); |
| |
| __owur int dtls1_read_failed(SSL *s, int code); |
| __owur int dtls1_buffer_message(SSL *s, int ccs); |
| __owur int dtls1_retransmit_message(SSL *s, unsigned short seq, |
| unsigned long frag_off, int *found); |
| __owur int dtls1_get_queue_priority(unsigned short seq, int is_ccs); |
| int dtls1_retransmit_buffered_messages(SSL *s); |
| void dtls1_clear_record_buffer(SSL *s); |
| void dtls1_get_message_header(unsigned char *data, |
| struct hm_header_st *msg_hdr); |
| __owur long dtls1_default_timeout(void); |
| __owur struct timeval *dtls1_get_timeout(SSL *s, struct timeval *timeleft); |
| __owur int dtls1_check_timeout_num(SSL *s); |
| __owur int dtls1_handle_timeout(SSL *s); |
| __owur const SSL_CIPHER *dtls1_get_cipher(unsigned int u); |
| void dtls1_start_timer(SSL *s); |
| void dtls1_stop_timer(SSL *s); |
| __owur int dtls1_is_timer_expired(SSL *s); |
| void dtls1_double_timeout(SSL *s); |
| __owur unsigned int dtls_raw_hello_verify_request(unsigned char *buf, |
| unsigned char *cookie, |
| unsigned char cookie_len); |
| __owur int dtls1_send_newsession_ticket(SSL *s); |
| __owur unsigned int dtls1_min_mtu(SSL *s); |
| void dtls1_hm_fragment_free(hm_fragment *frag); |
| __owur int dtls1_query_mtu(SSL *s); |
| |
| __owur int tls1_new(SSL *s); |
| void tls1_free(SSL *s); |
| void tls1_clear(SSL *s); |
| long tls1_ctrl(SSL *s, int cmd, long larg, void *parg); |
| long tls1_callback_ctrl(SSL *s, int cmd, void (*fp) (void)); |
| |
| __owur int dtls1_new(SSL *s); |
| void dtls1_free(SSL *s); |
| void dtls1_clear(SSL *s); |
| long dtls1_ctrl(SSL *s, int cmd, long larg, void *parg); |
| __owur int dtls1_shutdown(SSL *s); |
| |
| __owur int dtls1_dispatch_alert(SSL *s); |
| |
| __owur int ssl_init_wbio_buffer(SSL *s, int push); |
| void ssl_free_wbio_buffer(SSL *s); |
| |
| __owur int tls1_change_cipher_state(SSL *s, int which); |
| __owur int tls1_setup_key_block(SSL *s); |
| __owur int tls1_final_finish_mac(SSL *s, |
| const char *str, int slen, unsigned char *p); |
| __owur int tls1_generate_master_secret(SSL *s, unsigned char *out, |
| unsigned char *p, int len); |
| __owur int tls1_export_keying_material(SSL *s, unsigned char *out, size_t olen, |
| const char *label, size_t llen, |
| const unsigned char *p, size_t plen, |
| int use_context); |
| __owur int tls1_alert_code(int code); |
| __owur int ssl3_alert_code(int code); |
| __owur int ssl_ok(SSL *s); |
| |
| # ifndef OPENSSL_NO_EC |
| __owur int ssl_check_srvr_ecc_cert_and_alg(X509 *x, SSL *s); |
| # endif |
| |
| SSL_COMP *ssl3_comp_find(STACK_OF(SSL_COMP) *sk, int n); |
| |
| # ifndef OPENSSL_NO_EC |
| __owur int tls1_ec_curve_id2nid(int curve_id); |
| __owur int tls1_ec_nid2curve_id(int nid); |
| __owur int tls1_check_curve(SSL *s, const unsigned char *p, size_t len); |
| __owur int tls1_shared_curve(SSL *s, int nmatch); |
| __owur int tls1_set_curves(unsigned char **pext, size_t *pextlen, |
| int *curves, size_t ncurves); |
| __owur int tls1_set_curves_list(unsigned char **pext, size_t *pextlen, |
| const char *str); |
| __owur int tls1_check_ec_tmp_key(SSL *s, unsigned long id); |
| # endif /* OPENSSL_NO_EC */ |
| |
| __owur int tls1_shared_list(SSL *s, |
| const unsigned char *l1, size_t l1len, |
| const unsigned char *l2, size_t l2len, int nmatch); |
| __owur unsigned char *ssl_add_clienthello_tlsext(SSL *s, unsigned char *buf, |
| unsigned char *limit, int *al); |
| __owur unsigned char *ssl_add_serverhello_tlsext(SSL *s, unsigned char *buf, |
| unsigned char *limit, int *al); |
| __owur int ssl_parse_clienthello_tlsext(SSL *s, PACKET *pkt); |
| void ssl_set_default_md(SSL *s); |
| __owur int tls1_set_server_sigalgs(SSL *s); |
| __owur int ssl_check_clienthello_tlsext_late(SSL *s); |
| __owur int ssl_parse_serverhello_tlsext(SSL *s, PACKET *pkt); |
| __owur int ssl_prepare_clienthello_tlsext(SSL *s); |
| __owur int ssl_prepare_serverhello_tlsext(SSL *s); |
| |
| # ifndef OPENSSL_NO_HEARTBEATS |
| __owur int tls1_heartbeat(SSL *s); |
| __owur int dtls1_heartbeat(SSL *s); |
| __owur int tls1_process_heartbeat(SSL *s, unsigned char *p, unsigned int length); |
| __owur int dtls1_process_heartbeat(SSL *s, unsigned char *p, unsigned int length); |
| # endif |
| |
| __owur int tls_check_serverhello_tlsext_early(SSL *s, const PACKET *ext, |
| const PACKET *session_id, |
| SSL_SESSION **ret); |
| |
| __owur int tls12_get_sigandhash(unsigned char *p, const EVP_PKEY *pk, |
| const EVP_MD *md); |
| __owur int tls12_get_sigid(const EVP_PKEY *pk); |
| __owur const EVP_MD *tls12_get_hash(unsigned char hash_alg); |
| void ssl_set_sig_mask(uint32_t *pmask_a, SSL *s, int op); |
| |
| __owur int tls1_set_sigalgs_list(CERT *c, const char *str, int client); |
| __owur int tls1_set_sigalgs(CERT *c, const int *salg, size_t salglen, int client); |
| int tls1_check_chain(SSL *s, X509 *x, EVP_PKEY *pk, STACK_OF(X509) *chain, |
| int idx); |
| void tls1_set_cert_validity(SSL *s); |
| |
| # ifndef OPENSSL_NO_DH |
| __owur DH *ssl_get_auto_dh(SSL *s); |
| # endif |
| |
| __owur int ssl_security_cert(SSL *s, SSL_CTX *ctx, X509 *x, int vfy, int is_ee); |
| __owur int ssl_security_cert_chain(SSL *s, STACK_OF(X509) *sk, X509 *ex, int vfy); |
| |
| __owur EVP_MD_CTX *ssl_replace_hash(EVP_MD_CTX **hash, const EVP_MD *md); |
| void ssl_clear_hash_ctx(EVP_MD_CTX **hash); |
| __owur int ssl_add_serverhello_renegotiate_ext(SSL *s, unsigned char *p, int *len, |
| int maxlen); |
| __owur int ssl_parse_serverhello_renegotiate_ext(SSL *s, PACKET *pkt, |
| int *al); |
| __owur int ssl_add_clienthello_renegotiate_ext(SSL *s, unsigned char *p, int *len, |
| int maxlen); |
| __owur int ssl_parse_clienthello_renegotiate_ext(SSL *s, PACKET *pkt, int *al); |
| __owur long ssl_get_algorithm2(SSL *s); |
| __owur size_t tls12_copy_sigalgs(SSL *s, unsigned char *out, |
| const unsigned char *psig, size_t psiglen); |
| __owur int tls1_save_sigalgs(SSL *s, const unsigned char *data, int dsize); |
| __owur int tls1_process_sigalgs(SSL *s); |
| __owur size_t tls12_get_psigalgs(SSL *s, const unsigned char **psigs); |
| __owur int tls12_check_peer_sigalg(const EVP_MD **pmd, SSL *s, |
| const unsigned char *sig, EVP_PKEY *pkey); |
| void ssl_set_client_disabled(SSL *s); |
| __owur int ssl_cipher_disabled(SSL *s, const SSL_CIPHER *c, int op); |
| |
| __owur int ssl_add_clienthello_use_srtp_ext(SSL *s, unsigned char *p, int *len, |
| int maxlen); |
| __owur int ssl_parse_clienthello_use_srtp_ext(SSL *s, PACKET *pkt, int *al); |
| __owur int ssl_add_serverhello_use_srtp_ext(SSL *s, unsigned char *p, int *len, |
| int maxlen); |
| __owur int ssl_parse_serverhello_use_srtp_ext(SSL *s, PACKET *pkt, int *al); |
| |
| __owur int ssl_handshake_hash(SSL *s, unsigned char *out, int outlen); |
| __owur const EVP_MD *ssl_md(int idx); |
| __owur const EVP_MD *ssl_handshake_md(SSL *s); |
| __owur const EVP_MD *ssl_prf_md(SSL *s); |
| |
| /* s3_cbc.c */ |
| __owur char ssl3_cbc_record_digest_supported(const EVP_MD_CTX *ctx); |
| __owur int ssl3_cbc_digest_record(const EVP_MD_CTX *ctx, |
| unsigned char *md_out, |
| size_t *md_out_size, |
| const unsigned char header[13], |
| const unsigned char *data, |
| size_t data_plus_mac_size, |
| size_t data_plus_mac_plus_padding_size, |
| const unsigned char *mac_secret, |
| unsigned mac_secret_length, char is_sslv3); |
| |
| void tls_fips_digest_extra(const EVP_CIPHER_CTX *cipher_ctx, |
| EVP_MD_CTX *mac_ctx, const unsigned char *data, |
| size_t data_len, size_t orig_len); |
| |
| __owur int srp_generate_server_master_secret(SSL *s); |
| __owur int srp_generate_client_master_secret(SSL *s); |
| __owur int srp_verify_server_param(SSL *s, int *al); |
| |
| /* t1_ext.c */ |
| |
| void custom_ext_init(custom_ext_methods *meths); |
| |
| __owur int custom_ext_parse(SSL *s, int server, |
| unsigned int ext_type, |
| const unsigned char *ext_data, size_t ext_size, int *al); |
| __owur int custom_ext_add(SSL *s, int server, |
| unsigned char **pret, unsigned char *limit, int *al); |
| |
| __owur int custom_exts_copy(custom_ext_methods *dst, const custom_ext_methods *src); |
| void custom_exts_free(custom_ext_methods *exts); |
| |
| # else |
| |
| # define ssl_init_wbio_buffer SSL_test_functions()->p_ssl_init_wbio_buffer |
| # define ssl3_setup_buffers SSL_test_functions()->p_ssl3_setup_buffers |
| # define tls1_process_heartbeat SSL_test_functions()->p_tls1_process_heartbeat |
| # define dtls1_process_heartbeat SSL_test_functions()->p_dtls1_process_heartbeat |
| |
| # endif |
| #endif |