| /* |
| * Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. |
| * Copyright (c) 2002, Oracle and/or its affiliates. All rights reserved |
| * |
| * Licensed under the OpenSSL license (the "License"). You may not use |
| * this file except in compliance with the License. You can obtain a copy |
| * in the file LICENSE in the source distribution or at |
| * https://www.openssl.org/source/license.html |
| */ |
| |
| #include <limits.h> |
| #include <string.h> |
| #include <stdio.h> |
| #include "../ssl_locl.h" |
| #include "statem_locl.h" |
| #include <openssl/buffer.h> |
| #include <openssl/objects.h> |
| #include <openssl/evp.h> |
| #include <openssl/x509.h> |
| |
| /* |
| * send s->init_buf in records of type 'type' (SSL3_RT_HANDSHAKE or |
| * SSL3_RT_CHANGE_CIPHER_SPEC) |
| */ |
| int ssl3_do_write(SSL *s, int type) |
| { |
| int ret; |
| size_t written = 0; |
| |
| ret = ssl3_write_bytes(s, type, &s->init_buf->data[s->init_off], |
| s->init_num, &written); |
| if (ret < 0) |
| return (-1); |
| if (type == SSL3_RT_HANDSHAKE) |
| /* |
| * should not be done for 'Hello Request's, but in that case we'll |
| * ignore the result anyway |
| */ |
| if (!ssl3_finish_mac(s, |
| (unsigned char *)&s->init_buf->data[s->init_off], |
| written)) |
| return -1; |
| |
| if (written == s->init_num) { |
| if (s->msg_callback) |
| s->msg_callback(1, s->version, type, s->init_buf->data, |
| (size_t)(s->init_off + s->init_num), s, |
| s->msg_callback_arg); |
| return (1); |
| } |
| s->init_off += written; |
| s->init_num -= written; |
| return (0); |
| } |
| |
| int tls_close_construct_packet(SSL *s, WPACKET *pkt, int htype) |
| { |
| size_t msglen; |
| |
| if ((htype != SSL3_MT_CHANGE_CIPHER_SPEC && !WPACKET_close(pkt)) |
| || !WPACKET_get_length(pkt, &msglen) |
| || msglen > INT_MAX) |
| return 0; |
| s->init_num = (int)msglen; |
| s->init_off = 0; |
| |
| return 1; |
| } |
| |
| int tls_setup_handshake(SSL *s) |
| { |
| if (!ssl3_init_finished_mac(s)) |
| return 0; |
| |
| /* Reset any extension flags */ |
| memset(s->ext.extflags, 0, sizeof(s->ext.extflags)); |
| |
| if (s->server) { |
| STACK_OF(SSL_CIPHER) *ciphers = SSL_get_ciphers(s); |
| int i, ver_min, ver_max, ok = 0; |
| |
| /* |
| * Sanity check that the maximum version we accept has ciphers |
| * enabled. For clients we do this check during construction of the |
| * ClientHello. |
| */ |
| if (ssl_get_min_max_version(s, &ver_min, &ver_max) != 0) { |
| SSLerr(SSL_F_TLS_SETUP_HANDSHAKE, ERR_R_INTERNAL_ERROR); |
| ssl3_send_alert(s, SSL3_AL_FATAL, SSL_AD_INTERNAL_ERROR); |
| return 0; |
| } |
| for (i = 0; i < sk_SSL_CIPHER_num(ciphers); i++) { |
| const SSL_CIPHER *c = sk_SSL_CIPHER_value(ciphers, i); |
| |
| if (SSL_IS_DTLS(s)) { |
| if (DTLS_VERSION_GE(ver_max, c->min_dtls) && |
| DTLS_VERSION_LE(ver_max, c->max_dtls)) |
| ok = 1; |
| } else if (ver_max >= c->min_tls && ver_max <= c->max_tls) { |
| ok = 1; |
| } |
| if (ok) |
| break; |
| } |
| if (!ok) { |
| SSLerr(SSL_F_TLS_SETUP_HANDSHAKE, SSL_R_NO_CIPHERS_AVAILABLE); |
| ERR_add_error_data(1, "No ciphers enabled for max supported " |
| "SSL/TLS version"); |
| ssl3_send_alert(s, SSL3_AL_FATAL, SSL_AD_HANDSHAKE_FAILURE); |
| return 0; |
| } |
| if (SSL_IS_FIRST_HANDSHAKE(s)) { |
| s->ctx->stats.sess_accept++; |
| } else if ((s->options & SSL_OP_NO_RENEGOTIATION)) { |
| /* Renegotiation is disabled */ |
| ssl3_send_alert(s, SSL3_AL_WARNING, SSL_AD_NO_RENEGOTIATION); |
| return 0; |
| } else if (!s->s3->send_connection_binding && |
| !(s->options & |
| SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION)) { |
| /* |
| * Server attempting to renegotiate with client that doesn't |
| * support secure renegotiation. |
| */ |
| SSLerr(SSL_F_TLS_SETUP_HANDSHAKE, |
| SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED); |
| ssl3_send_alert(s, SSL3_AL_FATAL, SSL_AD_HANDSHAKE_FAILURE); |
| return 0; |
| } else { |
| s->ctx->stats.sess_accept_renegotiate++; |
| |
| s->s3->tmp.cert_request = 0; |
| } |
| } else { |
| if (SSL_IS_FIRST_HANDSHAKE(s)) |
| s->ctx->stats.sess_connect++; |
| else |
| s->ctx->stats.sess_connect_renegotiate++; |
| |
| /* mark client_random uninitialized */ |
| memset(s->s3->client_random, 0, sizeof(s->s3->client_random)); |
| s->hit = 0; |
| |
| s->s3->tmp.cert_req = 0; |
| |
| if (SSL_IS_DTLS(s)) |
| s->statem.use_timer = 1; |
| } |
| |
| return 1; |
| } |
| |
| /* |
| * Size of the to-be-signed TLS13 data, without the hash size itself: |
| * 64 bytes of value 32, 33 context bytes, 1 byte separator |
| */ |
| #define TLS13_TBS_START_SIZE 64 |
| #define TLS13_TBS_PREAMBLE_SIZE (TLS13_TBS_START_SIZE + 33 + 1) |
| |
| static int get_cert_verify_tbs_data(SSL *s, unsigned char *tls13tbs, |
| void **hdata, size_t *hdatalen) |
| { |
| static const char *servercontext = "TLS 1.3, server CertificateVerify"; |
| static const char *clientcontext = "TLS 1.3, client CertificateVerify"; |
| |
| if (SSL_IS_TLS13(s)) { |
| size_t hashlen; |
| |
| /* Set the first 64 bytes of to-be-signed data to octet 32 */ |
| memset(tls13tbs, 32, TLS13_TBS_START_SIZE); |
| /* This copies the 33 bytes of context plus the 0 separator byte */ |
| if (s->statem.hand_state == TLS_ST_CR_CERT_VRFY |
| || s->statem.hand_state == TLS_ST_SW_CERT_VRFY) |
| strcpy((char *)tls13tbs + TLS13_TBS_START_SIZE, servercontext); |
| else |
| strcpy((char *)tls13tbs + TLS13_TBS_START_SIZE, clientcontext); |
| |
| /* |
| * If we're currently reading then we need to use the saved handshake |
| * hash value. We can't use the current handshake hash state because |
| * that includes the CertVerify itself. |
| */ |
| if (s->statem.hand_state == TLS_ST_CR_CERT_VRFY |
| || s->statem.hand_state == TLS_ST_SR_CERT_VRFY) { |
| memcpy(tls13tbs + TLS13_TBS_PREAMBLE_SIZE, s->cert_verify_hash, |
| s->cert_verify_hash_len); |
| hashlen = s->cert_verify_hash_len; |
| } else if (!ssl_handshake_hash(s, tls13tbs + TLS13_TBS_PREAMBLE_SIZE, |
| EVP_MAX_MD_SIZE, &hashlen)) { |
| return 0; |
| } |
| |
| *hdata = tls13tbs; |
| *hdatalen = TLS13_TBS_PREAMBLE_SIZE + hashlen; |
| } else { |
| size_t retlen; |
| |
| retlen = BIO_get_mem_data(s->s3->handshake_buffer, hdata); |
| if (retlen <= 0) |
| return 0; |
| *hdatalen = retlen; |
| } |
| |
| return 1; |
| } |
| |
| int tls_construct_cert_verify(SSL *s, WPACKET *pkt) |
| { |
| EVP_PKEY *pkey = NULL; |
| const EVP_MD *md = NULL; |
| EVP_MD_CTX *mctx = NULL; |
| EVP_PKEY_CTX *pctx = NULL; |
| size_t hdatalen = 0, siglen = 0; |
| void *hdata; |
| unsigned char *sig = NULL; |
| unsigned char tls13tbs[TLS13_TBS_PREAMBLE_SIZE + EVP_MAX_MD_SIZE]; |
| const SIGALG_LOOKUP *lu = s->s3->tmp.sigalg; |
| |
| if (lu == NULL || s->s3->tmp.cert == NULL) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_CERT_VERIFY, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| pkey = s->s3->tmp.cert->privatekey; |
| |
| if (pkey == NULL || !tls1_lookup_md(lu, &md)) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_CERT_VERIFY, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| |
| mctx = EVP_MD_CTX_new(); |
| if (mctx == NULL) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_CERT_VERIFY, ERR_R_MALLOC_FAILURE); |
| goto err; |
| } |
| |
| /* Get the data to be signed */ |
| if (!get_cert_verify_tbs_data(s, tls13tbs, &hdata, &hdatalen)) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_CERT_VERIFY, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| |
| if (SSL_USE_SIGALGS(s) && !WPACKET_put_bytes_u16(pkt, lu->sigalg)) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_CERT_VERIFY, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| siglen = EVP_PKEY_size(pkey); |
| sig = OPENSSL_malloc(siglen); |
| if (sig == NULL) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_CERT_VERIFY, ERR_R_MALLOC_FAILURE); |
| goto err; |
| } |
| |
| if (EVP_DigestSignInit(mctx, &pctx, md, NULL, pkey) <= 0) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_CERT_VERIFY, ERR_R_EVP_LIB); |
| goto err; |
| } |
| |
| if (lu->sig == EVP_PKEY_RSA_PSS) { |
| if (EVP_PKEY_CTX_set_rsa_padding(pctx, RSA_PKCS1_PSS_PADDING) <= 0 |
| || EVP_PKEY_CTX_set_rsa_pss_saltlen(pctx, |
| RSA_PSS_SALTLEN_DIGEST) <= 0) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_CERT_VERIFY, ERR_R_EVP_LIB); |
| goto err; |
| } |
| } |
| if (s->version == SSL3_VERSION) { |
| if (EVP_DigestSignUpdate(mctx, hdata, hdatalen) <= 0 |
| || !EVP_MD_CTX_ctrl(mctx, EVP_CTRL_SSL3_MASTER_SECRET, |
| (int)s->session->master_key_length, |
| s->session->master_key) |
| || EVP_DigestSignFinal(mctx, sig, &siglen) <= 0) { |
| |
| SSLerr(SSL_F_TLS_CONSTRUCT_CERT_VERIFY, ERR_R_EVP_LIB); |
| goto err; |
| } |
| } else if (EVP_DigestSign(mctx, sig, &siglen, hdata, hdatalen) <= 0) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_CERT_VERIFY, ERR_R_EVP_LIB); |
| goto err; |
| } |
| |
| #ifndef OPENSSL_NO_GOST |
| { |
| int pktype = lu->sig; |
| |
| if (pktype == NID_id_GostR3410_2001 |
| || pktype == NID_id_GostR3410_2012_256 |
| || pktype == NID_id_GostR3410_2012_512) |
| BUF_reverse(sig, NULL, siglen); |
| } |
| #endif |
| |
| if (!WPACKET_sub_memcpy_u16(pkt, sig, siglen)) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_CERT_VERIFY, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| |
| /* Digest cached records and discard handshake buffer */ |
| if (!ssl3_digest_cached_records(s, 0)) |
| goto err; |
| |
| OPENSSL_free(sig); |
| EVP_MD_CTX_free(mctx); |
| return 1; |
| err: |
| OPENSSL_free(sig); |
| EVP_MD_CTX_free(mctx); |
| ssl3_send_alert(s, SSL3_AL_FATAL, SSL_AD_INTERNAL_ERROR); |
| return 0; |
| } |
| |
| MSG_PROCESS_RETURN tls_process_cert_verify(SSL *s, PACKET *pkt) |
| { |
| EVP_PKEY *pkey = NULL; |
| const unsigned char *data; |
| #ifndef OPENSSL_NO_GOST |
| unsigned char *gost_data = NULL; |
| #endif |
| int al = SSL_AD_INTERNAL_ERROR, ret = MSG_PROCESS_ERROR; |
| int type = 0, j; |
| unsigned int len; |
| X509 *peer; |
| const EVP_MD *md = NULL; |
| size_t hdatalen = 0; |
| void *hdata; |
| unsigned char tls13tbs[TLS13_TBS_PREAMBLE_SIZE + EVP_MAX_MD_SIZE]; |
| EVP_MD_CTX *mctx = EVP_MD_CTX_new(); |
| EVP_PKEY_CTX *pctx = NULL; |
| |
| if (mctx == NULL) { |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, ERR_R_MALLOC_FAILURE); |
| goto f_err; |
| } |
| |
| peer = s->session->peer; |
| pkey = X509_get0_pubkey(peer); |
| if (pkey == NULL) |
| goto f_err; |
| |
| type = X509_certificate_type(peer, pkey); |
| |
| if (!(type & EVP_PKT_SIGN)) { |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, |
| SSL_R_SIGNATURE_FOR_NON_SIGNING_CERTIFICATE); |
| al = SSL_AD_ILLEGAL_PARAMETER; |
| goto f_err; |
| } |
| |
| if (SSL_USE_SIGALGS(s)) { |
| int rv; |
| unsigned int sigalg; |
| |
| if (!PACKET_get_net_2(pkt, &sigalg)) { |
| al = SSL_AD_DECODE_ERROR; |
| goto f_err; |
| } |
| rv = tls12_check_peer_sigalg(s, sigalg, pkey); |
| if (rv == -1) { |
| goto f_err; |
| } else if (rv == 0) { |
| al = SSL_AD_DECODE_ERROR; |
| goto f_err; |
| } |
| #ifdef SSL_DEBUG |
| fprintf(stderr, "USING TLSv1.2 HASH %s\n", EVP_MD_name(md)); |
| #endif |
| } else if (!tls1_set_peer_legacy_sigalg(s, pkey)) { |
| al = SSL_AD_INTERNAL_ERROR; |
| goto f_err; |
| } |
| |
| if (!tls1_lookup_md(s->s3->tmp.peer_sigalg, &md)) { |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, ERR_R_INTERNAL_ERROR); |
| al = SSL_AD_INTERNAL_ERROR; |
| goto f_err; |
| } |
| |
| /* Check for broken implementations of GOST ciphersuites */ |
| /* |
| * If key is GOST and len is exactly 64 or 128, it is signature without |
| * length field (CryptoPro implementations at least till TLS 1.2) |
| */ |
| #ifndef OPENSSL_NO_GOST |
| if (!SSL_USE_SIGALGS(s) |
| && ((PACKET_remaining(pkt) == 64 |
| && (EVP_PKEY_id(pkey) == NID_id_GostR3410_2001 |
| || EVP_PKEY_id(pkey) == NID_id_GostR3410_2012_256)) |
| || (PACKET_remaining(pkt) == 128 |
| && EVP_PKEY_id(pkey) == NID_id_GostR3410_2012_512))) { |
| len = PACKET_remaining(pkt); |
| } else |
| #endif |
| if (!PACKET_get_net_2(pkt, &len)) { |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, SSL_R_LENGTH_MISMATCH); |
| al = SSL_AD_DECODE_ERROR; |
| goto f_err; |
| } |
| |
| j = EVP_PKEY_size(pkey); |
| if (((int)len > j) || ((int)PACKET_remaining(pkt) > j) |
| || (PACKET_remaining(pkt) == 0)) { |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, SSL_R_WRONG_SIGNATURE_SIZE); |
| al = SSL_AD_DECODE_ERROR; |
| goto f_err; |
| } |
| if (!PACKET_get_bytes(pkt, &data, len)) { |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, SSL_R_LENGTH_MISMATCH); |
| al = SSL_AD_DECODE_ERROR; |
| goto f_err; |
| } |
| |
| if (!get_cert_verify_tbs_data(s, tls13tbs, &hdata, &hdatalen)) { |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, ERR_R_INTERNAL_ERROR); |
| goto f_err; |
| } |
| |
| #ifdef SSL_DEBUG |
| fprintf(stderr, "Using client verify alg %s\n", EVP_MD_name(md)); |
| #endif |
| if (EVP_DigestVerifyInit(mctx, &pctx, md, NULL, pkey) <= 0) { |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, ERR_R_EVP_LIB); |
| goto f_err; |
| } |
| #ifndef OPENSSL_NO_GOST |
| { |
| int pktype = EVP_PKEY_id(pkey); |
| if (pktype == NID_id_GostR3410_2001 |
| || pktype == NID_id_GostR3410_2012_256 |
| || pktype == NID_id_GostR3410_2012_512) { |
| if ((gost_data = OPENSSL_malloc(len)) == NULL) { |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, ERR_R_MALLOC_FAILURE); |
| goto f_err; |
| } |
| BUF_reverse(gost_data, data, len); |
| data = gost_data; |
| } |
| } |
| #endif |
| |
| if (SSL_USE_PSS(s)) { |
| if (EVP_PKEY_CTX_set_rsa_padding(pctx, RSA_PKCS1_PSS_PADDING) <= 0 |
| || EVP_PKEY_CTX_set_rsa_pss_saltlen(pctx, |
| RSA_PSS_SALTLEN_DIGEST) <= 0) { |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, ERR_R_EVP_LIB); |
| goto f_err; |
| } |
| } |
| if (s->version == SSL3_VERSION) { |
| if (EVP_DigestVerifyUpdate(mctx, hdata, hdatalen) <= 0 |
| || !EVP_MD_CTX_ctrl(mctx, EVP_CTRL_SSL3_MASTER_SECRET, |
| (int)s->session->master_key_length, |
| s->session->master_key)) { |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, ERR_R_EVP_LIB); |
| goto f_err; |
| } |
| if (EVP_DigestVerifyFinal(mctx, data, len) <= 0) { |
| al = SSL_AD_DECRYPT_ERROR; |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, SSL_R_BAD_SIGNATURE); |
| goto f_err; |
| } |
| } else { |
| j = EVP_DigestVerify(mctx, data, len, hdata, hdatalen); |
| if (j < 0) { |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, ERR_R_EVP_LIB); |
| goto f_err; |
| } else if (j == 0) { |
| al = SSL_AD_DECRYPT_ERROR; |
| SSLerr(SSL_F_TLS_PROCESS_CERT_VERIFY, SSL_R_BAD_SIGNATURE); |
| goto f_err; |
| } |
| } |
| |
| ret = MSG_PROCESS_CONTINUE_READING; |
| if (0) { |
| f_err: |
| ssl3_send_alert(s, SSL3_AL_FATAL, al); |
| ossl_statem_set_error(s); |
| } |
| BIO_free(s->s3->handshake_buffer); |
| s->s3->handshake_buffer = NULL; |
| EVP_MD_CTX_free(mctx); |
| #ifndef OPENSSL_NO_GOST |
| OPENSSL_free(gost_data); |
| #endif |
| return ret; |
| } |
| |
| int tls_construct_finished(SSL *s, WPACKET *pkt) |
| { |
| size_t finish_md_len; |
| const char *sender; |
| size_t slen; |
| |
| /* This is a real handshake so make sure we clean it up at the end */ |
| if (!s->server) |
| s->statem.cleanuphand = 1; |
| |
| /* |
| * We only change the keys if we didn't already do this when we sent the |
| * client certificate |
| */ |
| if (SSL_IS_TLS13(s) |
| && !s->server |
| && s->s3->tmp.cert_req == 0 |
| && (!s->method->ssl3_enc->change_cipher_state(s, |
| SSL3_CC_HANDSHAKE | SSL3_CHANGE_CIPHER_CLIENT_WRITE))) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_FINISHED, SSL_R_CANNOT_CHANGE_CIPHER); |
| goto err; |
| } |
| |
| if (s->server) { |
| sender = s->method->ssl3_enc->server_finished_label; |
| slen = s->method->ssl3_enc->server_finished_label_len; |
| } else { |
| sender = s->method->ssl3_enc->client_finished_label; |
| slen = s->method->ssl3_enc->client_finished_label_len; |
| } |
| |
| finish_md_len = s->method->ssl3_enc->final_finish_mac(s, |
| sender, slen, |
| s->s3->tmp.finish_md); |
| if (finish_md_len == 0) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_FINISHED, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| |
| s->s3->tmp.finish_md_len = finish_md_len; |
| |
| if (!WPACKET_memcpy(pkt, s->s3->tmp.finish_md, finish_md_len)) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_FINISHED, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| |
| /* |
| * Log the master secret, if logging is enabled. We don't log it for |
| * TLSv1.3: there's a different key schedule for that. |
| */ |
| if (!SSL_IS_TLS13(s) && !ssl_log_secret(s, MASTER_SECRET_LABEL, |
| s->session->master_key, |
| s->session->master_key_length)) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_FINISHED, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| |
| /* |
| * Copy the finished so we can use it for renegotiation checks |
| */ |
| if (!ossl_assert(finish_md_len <= EVP_MAX_MD_SIZE)) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_FINISHED, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| if (!s->server) { |
| memcpy(s->s3->previous_client_finished, s->s3->tmp.finish_md, |
| finish_md_len); |
| s->s3->previous_client_finished_len = finish_md_len; |
| } else { |
| memcpy(s->s3->previous_server_finished, s->s3->tmp.finish_md, |
| finish_md_len); |
| s->s3->previous_server_finished_len = finish_md_len; |
| } |
| |
| return 1; |
| err: |
| ssl3_send_alert(s, SSL3_AL_FATAL, SSL_AD_INTERNAL_ERROR); |
| return 0; |
| } |
| |
| int tls_construct_key_update(SSL *s, WPACKET *pkt) |
| { |
| if (!WPACKET_put_bytes_u8(pkt, s->key_update)) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_KEY_UPDATE, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| |
| s->key_update = SSL_KEY_UPDATE_NONE; |
| return 1; |
| |
| err: |
| ssl3_send_alert(s, SSL3_AL_FATAL, SSL_AD_INTERNAL_ERROR); |
| return 0; |
| } |
| |
| MSG_PROCESS_RETURN tls_process_key_update(SSL *s, PACKET *pkt) |
| { |
| int al; |
| unsigned int updatetype; |
| |
| s->key_update_count++; |
| if (s->key_update_count > MAX_KEY_UPDATE_MESSAGES) { |
| al = SSL_AD_ILLEGAL_PARAMETER; |
| SSLerr(SSL_F_TLS_PROCESS_KEY_UPDATE, SSL_R_TOO_MANY_KEY_UPDATES); |
| goto err; |
| } |
| |
| /* |
| * A KeyUpdate message signals a key change so the end of the message must |
| * be on a record boundary. |
| */ |
| if (RECORD_LAYER_processed_read_pending(&s->rlayer)) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| SSLerr(SSL_F_TLS_PROCESS_KEY_UPDATE, SSL_R_NOT_ON_RECORD_BOUNDARY); |
| goto err; |
| } |
| |
| if (!PACKET_get_1(pkt, &updatetype) |
| || PACKET_remaining(pkt) != 0) { |
| al = SSL_AD_DECODE_ERROR; |
| SSLerr(SSL_F_TLS_PROCESS_KEY_UPDATE, SSL_R_BAD_KEY_UPDATE); |
| goto err; |
| } |
| |
| /* |
| * There are only two defined key update types. Fail if we get a value we |
| * didn't recognise. |
| */ |
| if (updatetype != SSL_KEY_UPDATE_NOT_REQUESTED |
| && updatetype != SSL_KEY_UPDATE_REQUESTED) { |
| al = SSL_AD_ILLEGAL_PARAMETER; |
| SSLerr(SSL_F_TLS_PROCESS_KEY_UPDATE, SSL_R_BAD_KEY_UPDATE); |
| goto err; |
| } |
| |
| /* |
| * If we get a request for us to update our sending keys too then, we need |
| * to additionally send a KeyUpdate message. However that message should |
| * not also request an update (otherwise we get into an infinite loop). |
| */ |
| if (updatetype == SSL_KEY_UPDATE_REQUESTED) |
| s->key_update = SSL_KEY_UPDATE_NOT_REQUESTED; |
| |
| if (!tls13_update_key(s, 0)) { |
| al = SSL_AD_INTERNAL_ERROR; |
| SSLerr(SSL_F_TLS_PROCESS_KEY_UPDATE, ERR_R_INTERNAL_ERROR); |
| goto err; |
| } |
| |
| return MSG_PROCESS_FINISHED_READING; |
| err: |
| ssl3_send_alert(s, SSL3_AL_FATAL, al); |
| ossl_statem_set_error(s); |
| return MSG_PROCESS_ERROR; |
| } |
| |
| #ifndef OPENSSL_NO_NEXTPROTONEG |
| /* |
| * ssl3_take_mac calculates the Finished MAC for the handshakes messages seen |
| * to far. |
| */ |
| static void ssl3_take_mac(SSL *s) |
| { |
| const char *sender; |
| size_t slen; |
| /* |
| * If no new cipher setup return immediately: other functions will set |
| * the appropriate error. |
| */ |
| if (s->s3->tmp.new_cipher == NULL) |
| return; |
| if (!s->server) { |
| sender = s->method->ssl3_enc->server_finished_label; |
| slen = s->method->ssl3_enc->server_finished_label_len; |
| } else { |
| sender = s->method->ssl3_enc->client_finished_label; |
| slen = s->method->ssl3_enc->client_finished_label_len; |
| } |
| |
| s->s3->tmp.peer_finish_md_len = s->method->ssl3_enc->final_finish_mac(s, |
| sender, |
| slen, |
| s->s3->tmp.peer_finish_md); |
| } |
| #endif |
| |
| MSG_PROCESS_RETURN tls_process_change_cipher_spec(SSL *s, PACKET *pkt) |
| { |
| int al; |
| size_t remain; |
| |
| remain = PACKET_remaining(pkt); |
| /* |
| * 'Change Cipher Spec' is just a single byte, which should already have |
| * been consumed by ssl_get_message() so there should be no bytes left, |
| * unless we're using DTLS1_BAD_VER, which has an extra 2 bytes |
| */ |
| if (SSL_IS_DTLS(s)) { |
| if ((s->version == DTLS1_BAD_VER |
| && remain != DTLS1_CCS_HEADER_LENGTH + 1) |
| || (s->version != DTLS1_BAD_VER |
| && remain != DTLS1_CCS_HEADER_LENGTH - 1)) { |
| al = SSL_AD_DECODE_ERROR; |
| SSLerr(SSL_F_TLS_PROCESS_CHANGE_CIPHER_SPEC, |
| SSL_R_BAD_CHANGE_CIPHER_SPEC); |
| goto f_err; |
| } |
| } else { |
| if (remain != 0) { |
| al = SSL_AD_DECODE_ERROR; |
| SSLerr(SSL_F_TLS_PROCESS_CHANGE_CIPHER_SPEC, |
| SSL_R_BAD_CHANGE_CIPHER_SPEC); |
| goto f_err; |
| } |
| } |
| |
| /* Check we have a cipher to change to */ |
| if (s->s3->tmp.new_cipher == NULL) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| SSLerr(SSL_F_TLS_PROCESS_CHANGE_CIPHER_SPEC, SSL_R_CCS_RECEIVED_EARLY); |
| goto f_err; |
| } |
| |
| s->s3->change_cipher_spec = 1; |
| if (!ssl3_do_change_cipher_spec(s)) { |
| al = SSL_AD_INTERNAL_ERROR; |
| SSLerr(SSL_F_TLS_PROCESS_CHANGE_CIPHER_SPEC, ERR_R_INTERNAL_ERROR); |
| goto f_err; |
| } |
| |
| if (SSL_IS_DTLS(s)) { |
| dtls1_reset_seq_numbers(s, SSL3_CC_READ); |
| |
| if (s->version == DTLS1_BAD_VER) |
| s->d1->handshake_read_seq++; |
| |
| #ifndef OPENSSL_NO_SCTP |
| /* |
| * Remember that a CCS has been received, so that an old key of |
| * SCTP-Auth can be deleted when a CCS is sent. Will be ignored if no |
| * SCTP is used |
| */ |
| BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_AUTH_CCS_RCVD, 1, NULL); |
| #endif |
| } |
| |
| return MSG_PROCESS_CONTINUE_READING; |
| f_err: |
| ssl3_send_alert(s, SSL3_AL_FATAL, al); |
| ossl_statem_set_error(s); |
| return MSG_PROCESS_ERROR; |
| } |
| |
| MSG_PROCESS_RETURN tls_process_finished(SSL *s, PACKET *pkt) |
| { |
| int al = SSL_AD_INTERNAL_ERROR; |
| size_t md_len; |
| |
| |
| /* This is a real handshake so make sure we clean it up at the end */ |
| if (s->server) |
| s->statem.cleanuphand = 1; |
| |
| /* |
| * In TLSv1.3 a Finished message signals a key change so the end of the |
| * message must be on a record boundary. |
| */ |
| if (SSL_IS_TLS13(s) && RECORD_LAYER_processed_read_pending(&s->rlayer)) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| SSLerr(SSL_F_TLS_PROCESS_FINISHED, SSL_R_NOT_ON_RECORD_BOUNDARY); |
| goto f_err; |
| } |
| |
| /* If this occurs, we have missed a message */ |
| if (!SSL_IS_TLS13(s) && !s->s3->change_cipher_spec) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| SSLerr(SSL_F_TLS_PROCESS_FINISHED, SSL_R_GOT_A_FIN_BEFORE_A_CCS); |
| goto f_err; |
| } |
| s->s3->change_cipher_spec = 0; |
| |
| md_len = s->s3->tmp.peer_finish_md_len; |
| |
| if (md_len != PACKET_remaining(pkt)) { |
| al = SSL_AD_DECODE_ERROR; |
| SSLerr(SSL_F_TLS_PROCESS_FINISHED, SSL_R_BAD_DIGEST_LENGTH); |
| goto f_err; |
| } |
| |
| if (CRYPTO_memcmp(PACKET_data(pkt), s->s3->tmp.peer_finish_md, |
| md_len) != 0) { |
| al = SSL_AD_DECRYPT_ERROR; |
| SSLerr(SSL_F_TLS_PROCESS_FINISHED, SSL_R_DIGEST_CHECK_FAILED); |
| goto f_err; |
| } |
| |
| /* |
| * Copy the finished so we can use it for renegotiation checks |
| */ |
| if (!ossl_assert(md_len <= EVP_MAX_MD_SIZE)) { |
| al = SSL_AD_INTERNAL_ERROR; |
| SSLerr(SSL_F_TLS_PROCESS_FINISHED, ERR_R_INTERNAL_ERROR); |
| goto f_err; |
| } |
| if (s->server) { |
| memcpy(s->s3->previous_client_finished, s->s3->tmp.peer_finish_md, |
| md_len); |
| s->s3->previous_client_finished_len = md_len; |
| } else { |
| memcpy(s->s3->previous_server_finished, s->s3->tmp.peer_finish_md, |
| md_len); |
| s->s3->previous_server_finished_len = md_len; |
| } |
| |
| /* |
| * In TLS1.3 we also have to change cipher state and do any final processing |
| * of the initial server flight (if we are a client) |
| */ |
| if (SSL_IS_TLS13(s)) { |
| if (s->server) { |
| if (!s->method->ssl3_enc->change_cipher_state(s, |
| SSL3_CC_APPLICATION | SSL3_CHANGE_CIPHER_SERVER_READ)) { |
| SSLerr(SSL_F_TLS_PROCESS_FINISHED, SSL_R_CANNOT_CHANGE_CIPHER); |
| goto f_err; |
| } |
| } else { |
| if (!s->method->ssl3_enc->generate_master_secret(s, |
| s->master_secret, s->handshake_secret, 0, |
| &s->session->master_key_length)) { |
| SSLerr(SSL_F_TLS_PROCESS_FINISHED, SSL_R_CANNOT_CHANGE_CIPHER); |
| goto f_err; |
| } |
| if (!s->method->ssl3_enc->change_cipher_state(s, |
| SSL3_CC_APPLICATION | SSL3_CHANGE_CIPHER_CLIENT_READ)) { |
| SSLerr(SSL_F_TLS_PROCESS_FINISHED, SSL_R_CANNOT_CHANGE_CIPHER); |
| goto f_err; |
| } |
| if (!tls_process_initial_server_flight(s, &al)) |
| goto f_err; |
| } |
| } |
| |
| return MSG_PROCESS_FINISHED_READING; |
| f_err: |
| ssl3_send_alert(s, SSL3_AL_FATAL, al); |
| ossl_statem_set_error(s); |
| return MSG_PROCESS_ERROR; |
| } |
| |
| int tls_construct_change_cipher_spec(SSL *s, WPACKET *pkt) |
| { |
| if (!WPACKET_put_bytes_u8(pkt, SSL3_MT_CCS)) { |
| SSLerr(SSL_F_TLS_CONSTRUCT_CHANGE_CIPHER_SPEC, ERR_R_INTERNAL_ERROR); |
| ssl3_send_alert(s, SSL3_AL_FATAL, SSL_AD_INTERNAL_ERROR); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| /* Add a certificate to the WPACKET */ |
| static int ssl_add_cert_to_wpacket(SSL *s, WPACKET *pkt, X509 *x, int chain, |
| int *al) |
| { |
| int len; |
| unsigned char *outbytes; |
| |
| len = i2d_X509(x, NULL); |
| if (len < 0) { |
| SSLerr(SSL_F_SSL_ADD_CERT_TO_WPACKET, ERR_R_BUF_LIB); |
| *al = SSL_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| if (!WPACKET_sub_allocate_bytes_u24(pkt, len, &outbytes) |
| || i2d_X509(x, &outbytes) != len) { |
| SSLerr(SSL_F_SSL_ADD_CERT_TO_WPACKET, ERR_R_INTERNAL_ERROR); |
| *al = SSL_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| |
| if (SSL_IS_TLS13(s) |
| && !tls_construct_extensions(s, pkt, SSL_EXT_TLS1_3_CERTIFICATE, x, |
| chain, al)) |
| return 0; |
| |
| return 1; |
| } |
| |
| /* Add certificate chain to provided WPACKET */ |
| static int ssl_add_cert_chain(SSL *s, WPACKET *pkt, CERT_PKEY *cpk, int *al) |
| { |
| int i, chain_count; |
| X509 *x; |
| STACK_OF(X509) *extra_certs; |
| STACK_OF(X509) *chain = NULL; |
| X509_STORE *chain_store; |
| int tmpal = SSL_AD_INTERNAL_ERROR; |
| |
| if (cpk == NULL || cpk->x509 == NULL) |
| return 1; |
| |
| x = cpk->x509; |
| |
| /* |
| * If we have a certificate specific chain use it, else use parent ctx. |
| */ |
| if (cpk->chain != NULL) |
| extra_certs = cpk->chain; |
| else |
| extra_certs = s->ctx->extra_certs; |
| |
| if ((s->mode & SSL_MODE_NO_AUTO_CHAIN) || extra_certs) |
| chain_store = NULL; |
| else if (s->cert->chain_store) |
| chain_store = s->cert->chain_store; |
| else |
| chain_store = s->ctx->cert_store; |
| |
| if (chain_store != NULL) { |
| X509_STORE_CTX *xs_ctx = X509_STORE_CTX_new(); |
| |
| if (xs_ctx == NULL) { |
| SSLerr(SSL_F_SSL_ADD_CERT_CHAIN, ERR_R_MALLOC_FAILURE); |
| goto err; |
| } |
| if (!X509_STORE_CTX_init(xs_ctx, chain_store, x, NULL)) { |
| X509_STORE_CTX_free(xs_ctx); |
| SSLerr(SSL_F_SSL_ADD_CERT_CHAIN, ERR_R_X509_LIB); |
| goto err; |
| } |
| /* |
| * It is valid for the chain not to be complete (because normally we |
| * don't include the root cert in the chain). Therefore we deliberately |
| * ignore the error return from this call. We're not actually verifying |
| * the cert - we're just building as much of the chain as we can |
| */ |
| (void)X509_verify_cert(xs_ctx); |
| /* Don't leave errors in the queue */ |
| ERR_clear_error(); |
| chain = X509_STORE_CTX_get0_chain(xs_ctx); |
| i = ssl_security_cert_chain(s, chain, NULL, 0); |
| if (i != 1) { |
| #if 0 |
| /* Dummy error calls so mkerr generates them */ |
| SSLerr(SSL_F_SSL_ADD_CERT_CHAIN, SSL_R_EE_KEY_TOO_SMALL); |
| SSLerr(SSL_F_SSL_ADD_CERT_CHAIN, SSL_R_CA_KEY_TOO_SMALL); |
| SSLerr(SSL_F_SSL_ADD_CERT_CHAIN, SSL_R_CA_MD_TOO_WEAK); |
| #endif |
| X509_STORE_CTX_free(xs_ctx); |
| SSLerr(SSL_F_SSL_ADD_CERT_CHAIN, i); |
| goto err; |
| } |
| chain_count = sk_X509_num(chain); |
| for (i = 0; i < chain_count; i++) { |
| x = sk_X509_value(chain, i); |
| |
| if (!ssl_add_cert_to_wpacket(s, pkt, x, i, &tmpal)) { |
| X509_STORE_CTX_free(xs_ctx); |
| goto err; |
| } |
| } |
| X509_STORE_CTX_free(xs_ctx); |
| } else { |
| i = ssl_security_cert_chain(s, extra_certs, x, 0); |
| if (i != 1) { |
| SSLerr(SSL_F_SSL_ADD_CERT_CHAIN, i); |
| goto err; |
| } |
| if (!ssl_add_cert_to_wpacket(s, pkt, x, 0, &tmpal)) |
| goto err; |
| for (i = 0; i < sk_X509_num(extra_certs); i++) { |
| x = sk_X509_value(extra_certs, i); |
| if (!ssl_add_cert_to_wpacket(s, pkt, x, i + 1, &tmpal)) |
| goto err; |
| } |
| } |
| return 1; |
| |
| err: |
| *al = tmpal; |
| return 0; |
| } |
| |
| unsigned long ssl3_output_cert_chain(SSL *s, WPACKET *pkt, CERT_PKEY *cpk, |
| int *al) |
| { |
| int tmpal = SSL_AD_INTERNAL_ERROR; |
| |
| if (!WPACKET_start_sub_packet_u24(pkt) |
| || !ssl_add_cert_chain(s, pkt, cpk, &tmpal) |
| || !WPACKET_close(pkt)) { |
| SSLerr(SSL_F_SSL3_OUTPUT_CERT_CHAIN, ERR_R_INTERNAL_ERROR); |
| *al = tmpal; |
| return 0; |
| } |
| return 1; |
| } |
| |
| /* |
| * Tidy up after the end of a handshake. In the case of SCTP this may result |
| * in NBIO events. If |clearbufs| is set then init_buf and the wbio buffer is |
| * freed up as well. |
| */ |
| WORK_STATE tls_finish_handshake(SSL *s, WORK_STATE wst, int clearbufs) |
| { |
| void (*cb) (const SSL *ssl, int type, int val) = NULL; |
| |
| #ifndef OPENSSL_NO_SCTP |
| if (SSL_IS_DTLS(s) && BIO_dgram_is_sctp(SSL_get_wbio(s))) { |
| WORK_STATE ret; |
| ret = dtls_wait_for_dry(s); |
| if (ret != WORK_FINISHED_CONTINUE) |
| return ret; |
| } |
| #endif |
| |
| if (clearbufs) { |
| if (!SSL_IS_DTLS(s)) { |
| /* |
| * We don't do this in DTLS because we may still need the init_buf |
| * in case there are any unexpected retransmits |
| */ |
| BUF_MEM_free(s->init_buf); |
| s->init_buf = NULL; |
| } |
| if (!ssl_free_wbio_buffer(s)) |
| return WORK_ERROR; |
| s->init_num = 0; |
| } |
| |
| if (s->statem.cleanuphand) { |
| /* skipped if we just sent a HelloRequest */ |
| s->renegotiate = 0; |
| s->new_session = 0; |
| s->statem.cleanuphand = 0; |
| |
| ssl3_cleanup_key_block(s); |
| |
| if (s->server) { |
| ssl_update_cache(s, SSL_SESS_CACHE_SERVER); |
| |
| s->ctx->stats.sess_accept_good++; |
| s->handshake_func = ossl_statem_accept; |
| } else { |
| ssl_update_cache(s, SSL_SESS_CACHE_CLIENT); |
| if (s->hit) |
| s->ctx->stats.sess_hit++; |
| |
| s->handshake_func = ossl_statem_connect; |
| s->ctx->stats.sess_connect_good++; |
| } |
| |
| if (s->info_callback != NULL) |
| cb = s->info_callback; |
| else if (s->ctx->info_callback != NULL) |
| cb = s->ctx->info_callback; |
| |
| if (cb != NULL) |
| cb(s, SSL_CB_HANDSHAKE_DONE, 1); |
| |
| if (SSL_IS_DTLS(s)) { |
| /* done with handshaking */ |
| s->d1->handshake_read_seq = 0; |
| s->d1->handshake_write_seq = 0; |
| s->d1->next_handshake_write_seq = 0; |
| dtls1_clear_received_buffer(s); |
| } |
| } |
| |
| /* |
| * If we've not cleared the buffers its because we've got more work to do, |
| * so continue. |
| */ |
| if (!clearbufs) |
| return WORK_FINISHED_CONTINUE; |
| |
| ossl_statem_set_in_init(s, 0); |
| return WORK_FINISHED_STOP; |
| } |
| |
| int tls_get_message_header(SSL *s, int *mt) |
| { |
| /* s->init_num < SSL3_HM_HEADER_LENGTH */ |
| int skip_message, i, recvd_type, al; |
| unsigned char *p; |
| size_t l, readbytes; |
| |
| p = (unsigned char *)s->init_buf->data; |
| |
| do { |
| while (s->init_num < SSL3_HM_HEADER_LENGTH) { |
| i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, &recvd_type, |
| &p[s->init_num], |
| SSL3_HM_HEADER_LENGTH - s->init_num, |
| 0, &readbytes); |
| if (i <= 0) { |
| s->rwstate = SSL_READING; |
| return 0; |
| } |
| if (recvd_type == SSL3_RT_CHANGE_CIPHER_SPEC) { |
| /* |
| * A ChangeCipherSpec must be a single byte and may not occur |
| * in the middle of a handshake message. |
| */ |
| if (s->init_num != 0 || readbytes != 1 || p[0] != SSL3_MT_CCS) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| SSLerr(SSL_F_TLS_GET_MESSAGE_HEADER, |
| SSL_R_BAD_CHANGE_CIPHER_SPEC); |
| goto f_err; |
| } |
| s->s3->tmp.message_type = *mt = SSL3_MT_CHANGE_CIPHER_SPEC; |
| s->init_num = readbytes - 1; |
| s->init_msg = s->init_buf->data; |
| s->s3->tmp.message_size = readbytes; |
| return 1; |
| } else if (recvd_type != SSL3_RT_HANDSHAKE) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| SSLerr(SSL_F_TLS_GET_MESSAGE_HEADER, SSL_R_CCS_RECEIVED_EARLY); |
| goto f_err; |
| } |
| s->init_num += readbytes; |
| } |
| |
| skip_message = 0; |
| if (!s->server) |
| if (s->statem.hand_state != TLS_ST_OK |
| && p[0] == SSL3_MT_HELLO_REQUEST) |
| /* |
| * The server may always send 'Hello Request' messages -- |
| * we are doing a handshake anyway now, so ignore them if |
| * their format is correct. Does not count for 'Finished' |
| * MAC. |
| */ |
| if (p[1] == 0 && p[2] == 0 && p[3] == 0) { |
| s->init_num = 0; |
| skip_message = 1; |
| |
| if (s->msg_callback) |
| s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE, |
| p, SSL3_HM_HEADER_LENGTH, s, |
| s->msg_callback_arg); |
| } |
| } while (skip_message); |
| /* s->init_num == SSL3_HM_HEADER_LENGTH */ |
| |
| *mt = *p; |
| s->s3->tmp.message_type = *(p++); |
| |
| if (RECORD_LAYER_is_sslv2_record(&s->rlayer)) { |
| /* |
| * Only happens with SSLv3+ in an SSLv2 backward compatible |
| * ClientHello |
| * |
| * Total message size is the remaining record bytes to read |
| * plus the SSL3_HM_HEADER_LENGTH bytes that we already read |
| */ |
| l = RECORD_LAYER_get_rrec_length(&s->rlayer) |
| + SSL3_HM_HEADER_LENGTH; |
| s->s3->tmp.message_size = l; |
| |
| s->init_msg = s->init_buf->data; |
| s->init_num = SSL3_HM_HEADER_LENGTH; |
| } else { |
| n2l3(p, l); |
| /* BUF_MEM_grow takes an 'int' parameter */ |
| if (l > (INT_MAX - SSL3_HM_HEADER_LENGTH)) { |
| al = SSL_AD_ILLEGAL_PARAMETER; |
| SSLerr(SSL_F_TLS_GET_MESSAGE_HEADER, SSL_R_EXCESSIVE_MESSAGE_SIZE); |
| goto f_err; |
| } |
| s->s3->tmp.message_size = l; |
| |
| s->init_msg = s->init_buf->data + SSL3_HM_HEADER_LENGTH; |
| s->init_num = 0; |
| } |
| |
| return 1; |
| f_err: |
| ssl3_send_alert(s, SSL3_AL_FATAL, al); |
| return 0; |
| } |
| |
| int tls_get_message_body(SSL *s, size_t *len) |
| { |
| size_t n, readbytes; |
| unsigned char *p; |
| int i; |
| |
| if (s->s3->tmp.message_type == SSL3_MT_CHANGE_CIPHER_SPEC) { |
| /* We've already read everything in */ |
| *len = (unsigned long)s->init_num; |
| return 1; |
| } |
| |
| p = s->init_msg; |
| n = s->s3->tmp.message_size - s->init_num; |
| while (n > 0) { |
| i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, NULL, |
| &p[s->init_num], n, 0, &readbytes); |
| if (i <= 0) { |
| s->rwstate = SSL_READING; |
| *len = 0; |
| return 0; |
| } |
| s->init_num += readbytes; |
| n -= readbytes; |
| } |
| |
| #ifndef OPENSSL_NO_NEXTPROTONEG |
| /* |
| * If receiving Finished, record MAC of prior handshake messages for |
| * Finished verification. |
| */ |
| if (*s->init_buf->data == SSL3_MT_FINISHED) |
| ssl3_take_mac(s); |
| #endif |
| |
| /* Feed this message into MAC computation. */ |
| if (RECORD_LAYER_is_sslv2_record(&s->rlayer)) { |
| if (!ssl3_finish_mac(s, (unsigned char *)s->init_buf->data, |
| s->init_num)) { |
| SSLerr(SSL_F_TLS_GET_MESSAGE_BODY, ERR_R_EVP_LIB); |
| ssl3_send_alert(s, SSL3_AL_FATAL, SSL_AD_INTERNAL_ERROR); |
| *len = 0; |
| return 0; |
| } |
| if (s->msg_callback) |
| s->msg_callback(0, SSL2_VERSION, 0, s->init_buf->data, |
| (size_t)s->init_num, s, s->msg_callback_arg); |
| } else { |
| /* |
| * We defer feeding in the HRR until later. We'll do it as part of |
| * processing the message |
| */ |
| if (s->s3->tmp.message_type != SSL3_MT_HELLO_RETRY_REQUEST |
| && !ssl3_finish_mac(s, (unsigned char *)s->init_buf->data, |
| s->init_num + SSL3_HM_HEADER_LENGTH)) { |
| SSLerr(SSL_F_TLS_GET_MESSAGE_BODY, ERR_R_EVP_LIB); |
| ssl3_send_alert(s, SSL3_AL_FATAL, SSL_AD_INTERNAL_ERROR); |
| *len = 0; |
| return 0; |
| } |
| if (s->msg_callback) |
| s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE, s->init_buf->data, |
| (size_t)s->init_num + SSL3_HM_HEADER_LENGTH, s, |
| s->msg_callback_arg); |
| } |
| |
| *len = s->init_num; |
| return 1; |
| } |
| |
| int ssl_cert_type(const X509 *x, const EVP_PKEY *pk) |
| { |
| if (pk == NULL && (pk = X509_get0_pubkey(x)) == NULL) |
| return -1; |
| |
| switch (EVP_PKEY_id(pk)) { |
| default: |
| return -1; |
| case EVP_PKEY_RSA: |
| return SSL_PKEY_RSA; |
| case EVP_PKEY_DSA: |
| return SSL_PKEY_DSA_SIGN; |
| #ifndef OPENSSL_NO_EC |
| case EVP_PKEY_EC: |
| return SSL_PKEY_ECC; |
| case EVP_PKEY_ED25519: |
| return SSL_PKEY_ED25519; |
| #endif |
| #ifndef OPENSSL_NO_GOST |
| case NID_id_GostR3410_2001: |
| return SSL_PKEY_GOST01; |
| case NID_id_GostR3410_2012_256: |
| return SSL_PKEY_GOST12_256; |
| case NID_id_GostR3410_2012_512: |
| return SSL_PKEY_GOST12_512; |
| #endif |
| } |
| } |
| |
| int ssl_verify_alarm_type(long type) |
| { |
| int al; |
| |
| switch (type) { |
| case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT: |
| case X509_V_ERR_UNABLE_TO_GET_CRL: |
| case X509_V_ERR_UNABLE_TO_GET_CRL_ISSUER: |
| al = SSL_AD_UNKNOWN_CA; |
| break; |
| case X509_V_ERR_UNABLE_TO_DECRYPT_CERT_SIGNATURE: |
| case X509_V_ERR_UNABLE_TO_DECRYPT_CRL_SIGNATURE: |
| case X509_V_ERR_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY: |
| case X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD: |
| case X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD: |
| case X509_V_ERR_ERROR_IN_CRL_LAST_UPDATE_FIELD: |
| case X509_V_ERR_ERROR_IN_CRL_NEXT_UPDATE_FIELD: |
| case X509_V_ERR_CERT_NOT_YET_VALID: |
| case X509_V_ERR_CRL_NOT_YET_VALID: |
| case X509_V_ERR_CERT_UNTRUSTED: |
| case X509_V_ERR_CERT_REJECTED: |
| case X509_V_ERR_HOSTNAME_MISMATCH: |
| case X509_V_ERR_EMAIL_MISMATCH: |
| case X509_V_ERR_IP_ADDRESS_MISMATCH: |
| case X509_V_ERR_DANE_NO_MATCH: |
| case X509_V_ERR_EE_KEY_TOO_SMALL: |
| case X509_V_ERR_CA_KEY_TOO_SMALL: |
| case X509_V_ERR_CA_MD_TOO_WEAK: |
| al = SSL_AD_BAD_CERTIFICATE; |
| break; |
| case X509_V_ERR_CERT_SIGNATURE_FAILURE: |
| case X509_V_ERR_CRL_SIGNATURE_FAILURE: |
| al = SSL_AD_DECRYPT_ERROR; |
| break; |
| case X509_V_ERR_CERT_HAS_EXPIRED: |
| case X509_V_ERR_CRL_HAS_EXPIRED: |
| al = SSL_AD_CERTIFICATE_EXPIRED; |
| break; |
| case X509_V_ERR_CERT_REVOKED: |
| al = SSL_AD_CERTIFICATE_REVOKED; |
| break; |
| case X509_V_ERR_UNSPECIFIED: |
| case X509_V_ERR_OUT_OF_MEM: |
| case X509_V_ERR_INVALID_CALL: |
| case X509_V_ERR_STORE_LOOKUP: |
| al = SSL_AD_INTERNAL_ERROR; |
| break; |
| case X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT: |
| case X509_V_ERR_SELF_SIGNED_CERT_IN_CHAIN: |
| case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY: |
| case X509_V_ERR_UNABLE_TO_VERIFY_LEAF_SIGNATURE: |
| case X509_V_ERR_CERT_CHAIN_TOO_LONG: |
| case X509_V_ERR_PATH_LENGTH_EXCEEDED: |
| case X509_V_ERR_INVALID_CA: |
| al = SSL_AD_UNKNOWN_CA; |
| break; |
| case X509_V_ERR_APPLICATION_VERIFICATION: |
| al = SSL_AD_HANDSHAKE_FAILURE; |
| break; |
| case X509_V_ERR_INVALID_PURPOSE: |
| al = SSL_AD_UNSUPPORTED_CERTIFICATE; |
| break; |
| default: |
| al = SSL_AD_CERTIFICATE_UNKNOWN; |
| break; |
| } |
| return (al); |
| } |
| |
| int ssl_allow_compression(SSL *s) |
| { |
| if (s->options & SSL_OP_NO_COMPRESSION) |
| return 0; |
| return ssl_security(s, SSL_SECOP_COMPRESSION, 0, 0, NULL); |
| } |
| |
| static int version_cmp(const SSL *s, int a, int b) |
| { |
| int dtls = SSL_IS_DTLS(s); |
| |
| if (a == b) |
| return 0; |
| if (!dtls) |
| return a < b ? -1 : 1; |
| return DTLS_VERSION_LT(a, b) ? -1 : 1; |
| } |
| |
| typedef struct { |
| int version; |
| const SSL_METHOD *(*cmeth) (void); |
| const SSL_METHOD *(*smeth) (void); |
| } version_info; |
| |
| #if TLS_MAX_VERSION != TLS1_3_VERSION |
| # error Code needs update for TLS_method() support beyond TLS1_3_VERSION. |
| #endif |
| |
| /* Must be in order high to low */ |
| static const version_info tls_version_table[] = { |
| #ifndef OPENSSL_NO_TLS1_3 |
| {TLS1_3_VERSION, tlsv1_3_client_method, tlsv1_3_server_method}, |
| #else |
| {TLS1_3_VERSION, NULL, NULL}, |
| #endif |
| #ifndef OPENSSL_NO_TLS1_2 |
| {TLS1_2_VERSION, tlsv1_2_client_method, tlsv1_2_server_method}, |
| #else |
| {TLS1_2_VERSION, NULL, NULL}, |
| #endif |
| #ifndef OPENSSL_NO_TLS1_1 |
| {TLS1_1_VERSION, tlsv1_1_client_method, tlsv1_1_server_method}, |
| #else |
| {TLS1_1_VERSION, NULL, NULL}, |
| #endif |
| #ifndef OPENSSL_NO_TLS1 |
| {TLS1_VERSION, tlsv1_client_method, tlsv1_server_method}, |
| #else |
| {TLS1_VERSION, NULL, NULL}, |
| #endif |
| #ifndef OPENSSL_NO_SSL3 |
| {SSL3_VERSION, sslv3_client_method, sslv3_server_method}, |
| #else |
| {SSL3_VERSION, NULL, NULL}, |
| #endif |
| {0, NULL, NULL}, |
| }; |
| |
| #if DTLS_MAX_VERSION != DTLS1_2_VERSION |
| # error Code needs update for DTLS_method() support beyond DTLS1_2_VERSION. |
| #endif |
| |
| /* Must be in order high to low */ |
| static const version_info dtls_version_table[] = { |
| #ifndef OPENSSL_NO_DTLS1_2 |
| {DTLS1_2_VERSION, dtlsv1_2_client_method, dtlsv1_2_server_method}, |
| #else |
| {DTLS1_2_VERSION, NULL, NULL}, |
| #endif |
| #ifndef OPENSSL_NO_DTLS1 |
| {DTLS1_VERSION, dtlsv1_client_method, dtlsv1_server_method}, |
| {DTLS1_BAD_VER, dtls_bad_ver_client_method, NULL}, |
| #else |
| {DTLS1_VERSION, NULL, NULL}, |
| {DTLS1_BAD_VER, NULL, NULL}, |
| #endif |
| {0, NULL, NULL}, |
| }; |
| |
| /* |
| * ssl_method_error - Check whether an SSL_METHOD is enabled. |
| * |
| * @s: The SSL handle for the candidate method |
| * @method: the intended method. |
| * |
| * Returns 0 on success, or an SSL error reason on failure. |
| */ |
| static int ssl_method_error(const SSL *s, const SSL_METHOD *method) |
| { |
| int version = method->version; |
| |
| if ((s->min_proto_version != 0 && |
| version_cmp(s, version, s->min_proto_version) < 0) || |
| ssl_security(s, SSL_SECOP_VERSION, 0, version, NULL) == 0) |
| return SSL_R_VERSION_TOO_LOW; |
| |
| if (s->max_proto_version != 0 && |
| version_cmp(s, version, s->max_proto_version) > 0) |
| return SSL_R_VERSION_TOO_HIGH; |
| |
| if ((s->options & method->mask) != 0) |
| return SSL_R_UNSUPPORTED_PROTOCOL; |
| if ((method->flags & SSL_METHOD_NO_SUITEB) != 0 && tls1_suiteb(s)) |
| return SSL_R_AT_LEAST_TLS_1_2_NEEDED_IN_SUITEB_MODE; |
| |
| return 0; |
| } |
| |
| /* |
| * ssl_version_supported - Check that the specified `version` is supported by |
| * `SSL *` instance |
| * |
| * @s: The SSL handle for the candidate method |
| * @version: Protocol version to test against |
| * |
| * Returns 1 when supported, otherwise 0 |
| */ |
| int ssl_version_supported(const SSL *s, int version) |
| { |
| const version_info *vent; |
| const version_info *table; |
| |
| switch (s->method->version) { |
| default: |
| /* Version should match method version for non-ANY method */ |
| return version_cmp(s, version, s->version) == 0; |
| case TLS_ANY_VERSION: |
| table = tls_version_table; |
| break; |
| case DTLS_ANY_VERSION: |
| table = dtls_version_table; |
| break; |
| } |
| |
| for (vent = table; |
| vent->version != 0 && version_cmp(s, version, vent->version) <= 0; |
| ++vent) { |
| if (vent->cmeth != NULL && |
| version_cmp(s, version, vent->version) == 0 && |
| ssl_method_error(s, vent->cmeth()) == 0) { |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * ssl_check_version_downgrade - In response to RFC7507 SCSV version |
| * fallback indication from a client check whether we're using the highest |
| * supported protocol version. |
| * |
| * @s server SSL handle. |
| * |
| * Returns 1 when using the highest enabled version, 0 otherwise. |
| */ |
| int ssl_check_version_downgrade(SSL *s) |
| { |
| const version_info *vent; |
| const version_info *table; |
| |
| /* |
| * Check that the current protocol is the highest enabled version |
| * (according to s->ctx->method, as version negotiation may have changed |
| * s->method). |
| */ |
| if (s->version == s->ctx->method->version) |
| return 1; |
| |
| /* |
| * Apparently we're using a version-flexible SSL_METHOD (not at its |
| * highest protocol version). |
| */ |
| if (s->ctx->method->version == TLS_method()->version) |
| table = tls_version_table; |
| else if (s->ctx->method->version == DTLS_method()->version) |
| table = dtls_version_table; |
| else { |
| /* Unexpected state; fail closed. */ |
| return 0; |
| } |
| |
| for (vent = table; vent->version != 0; ++vent) { |
| if (vent->smeth != NULL && ssl_method_error(s, vent->smeth()) == 0) |
| return s->version == vent->version; |
| } |
| return 0; |
| } |
| |
| /* |
| * ssl_set_version_bound - set an upper or lower bound on the supported (D)TLS |
| * protocols, provided the initial (D)TLS method is version-flexible. This |
| * function sanity-checks the proposed value and makes sure the method is |
| * version-flexible, then sets the limit if all is well. |
| * |
| * @method_version: The version of the current SSL_METHOD. |
| * @version: the intended limit. |
| * @bound: pointer to limit to be updated. |
| * |
| * Returns 1 on success, 0 on failure. |
| */ |
| int ssl_set_version_bound(int method_version, int version, int *bound) |
| { |
| if (version == 0) { |
| *bound = version; |
| return 1; |
| } |
| |
| /*- |
| * Restrict TLS methods to TLS protocol versions. |
| * Restrict DTLS methods to DTLS protocol versions. |
| * Note, DTLS version numbers are decreasing, use comparison macros. |
| * |
| * Note that for both lower-bounds we use explicit versions, not |
| * (D)TLS_MIN_VERSION. This is because we don't want to break user |
| * configurations. If the MIN (supported) version ever rises, the user's |
| * "floor" remains valid even if no longer available. We don't expect the |
| * MAX ceiling to ever get lower, so making that variable makes sense. |
| */ |
| switch (method_version) { |
| default: |
| /* |
| * XXX For fixed version methods, should we always fail and not set any |
| * bounds, always succeed and not set any bounds, or set the bounds and |
| * arrange to fail later if they are not met? At present fixed-version |
| * methods are not subject to controls that disable individual protocol |
| * versions. |
| */ |
| return 0; |
| |
| case TLS_ANY_VERSION: |
| if (version < SSL3_VERSION || version > TLS_MAX_VERSION) |
| return 0; |
| break; |
| |
| case DTLS_ANY_VERSION: |
| if (DTLS_VERSION_GT(version, DTLS_MAX_VERSION) || |
| DTLS_VERSION_LT(version, DTLS1_BAD_VER)) |
| return 0; |
| break; |
| } |
| |
| *bound = version; |
| return 1; |
| } |
| |
| static void check_for_downgrade(SSL *s, int vers, DOWNGRADE *dgrd) |
| { |
| if (vers == TLS1_2_VERSION |
| && ssl_version_supported(s, TLS1_3_VERSION)) { |
| *dgrd = DOWNGRADE_TO_1_2; |
| } else if (!SSL_IS_DTLS(s) && vers < TLS1_2_VERSION |
| && (ssl_version_supported(s, TLS1_2_VERSION) |
| || ssl_version_supported(s, TLS1_3_VERSION))) { |
| *dgrd = DOWNGRADE_TO_1_1; |
| } else { |
| *dgrd = DOWNGRADE_NONE; |
| } |
| } |
| |
| /* |
| * ssl_choose_server_version - Choose server (D)TLS version. Called when the |
| * client HELLO is received to select the final server protocol version and |
| * the version specific method. |
| * |
| * @s: server SSL handle. |
| * |
| * Returns 0 on success or an SSL error reason number on failure. |
| */ |
| int ssl_choose_server_version(SSL *s, CLIENTHELLO_MSG *hello, DOWNGRADE *dgrd) |
| { |
| /*- |
| * With version-flexible methods we have an initial state with: |
| * |
| * s->method->version == (D)TLS_ANY_VERSION, |
| * s->version == (D)TLS_MAX_VERSION. |
| * |
| * So we detect version-flexible methods via the method version, not the |
| * handle version. |
| */ |
| int server_version = s->method->version; |
| int client_version = hello->legacy_version; |
| const version_info *vent; |
| const version_info *table; |
| int disabled = 0; |
| RAW_EXTENSION *suppversions; |
| |
| s->client_version = client_version; |
| |
| switch (server_version) { |
| default: |
| if (!SSL_IS_TLS13(s)) { |
| if (version_cmp(s, client_version, s->version) < 0) |
| return SSL_R_WRONG_SSL_VERSION; |
| *dgrd = DOWNGRADE_NONE; |
| /* |
| * If this SSL handle is not from a version flexible method we don't |
| * (and never did) check min/max FIPS or Suite B constraints. Hope |
| * that's OK. It is up to the caller to not choose fixed protocol |
| * versions they don't want. If not, then easy to fix, just return |
| * ssl_method_error(s, s->method) |
| */ |
| return 0; |
| } |
| /* |
| * Fall through if we are TLSv1.3 already (this means we must be after |
| * a HelloRetryRequest |
| */ |
| /* fall thru */ |
| case TLS_ANY_VERSION: |
| table = tls_version_table; |
| break; |
| case DTLS_ANY_VERSION: |
| table = dtls_version_table; |
| break; |
| } |
| |
| suppversions = &hello->pre_proc_exts[TLSEXT_IDX_supported_versions]; |
| |
| if (suppversions->present && !SSL_IS_DTLS(s)) { |
| unsigned int candidate_vers = 0; |
| unsigned int best_vers = 0; |
| const SSL_METHOD *best_method = NULL; |
| PACKET versionslist; |
| |
| suppversions->parsed = 1; |
| |
| if (!PACKET_as_length_prefixed_1(&suppversions->data, &versionslist)) { |
| /* Trailing or invalid data? */ |
| return SSL_R_LENGTH_MISMATCH; |
| } |
| |
| while (PACKET_get_net_2(&versionslist, &candidate_vers)) { |
| /* TODO(TLS1.3): Remove this before release */ |
| if (candidate_vers == TLS1_3_VERSION_DRAFT) |
| candidate_vers = TLS1_3_VERSION; |
| /* |
| * TODO(TLS1.3): There is some discussion on the TLS list about |
| * whether to ignore versions <TLS1.2 in supported_versions. At the |
| * moment we honour them if present. To be reviewed later |
| */ |
| if (version_cmp(s, candidate_vers, best_vers) <= 0) |
| continue; |
| for (vent = table; |
| vent->version != 0 && vent->version != (int)candidate_vers; |
| ++vent) |
| continue; |
| if (vent->version != 0 && vent->smeth != NULL) { |
| const SSL_METHOD *method; |
| |
| method = vent->smeth(); |
| if (ssl_method_error(s, method) == 0) { |
| best_vers = candidate_vers; |
| best_method = method; |
| } |
| } |
| } |
| if (PACKET_remaining(&versionslist) != 0) { |
| /* Trailing data? */ |
| return SSL_R_LENGTH_MISMATCH; |
| } |
| |
| if (best_vers > 0) { |
| if (SSL_IS_TLS13(s)) { |
| /* |
| * We get here if this is after a HelloRetryRequest. In this |
| * case we just check that we still negotiated TLSv1.3 |
| */ |
| if (best_vers != TLS1_3_VERSION) |
| return SSL_R_UNSUPPORTED_PROTOCOL; |
| return 0; |
| } |
| check_for_downgrade(s, best_vers, dgrd); |
| s->version = best_vers; |
| s->method = best_method; |
| return 0; |
| } |
| return SSL_R_UNSUPPORTED_PROTOCOL; |
| } |
| |
| /* |
| * If the supported versions extension isn't present, then the highest |
| * version we can negotiate is TLSv1.2 |
| */ |
| if (version_cmp(s, client_version, TLS1_3_VERSION) >= 0) |
| client_version = TLS1_2_VERSION; |
| |
| /* |
| * No supported versions extension, so we just use the version supplied in |
| * the ClientHello. |
| */ |
| for (vent = table; vent->version != 0; ++vent) { |
| const SSL_METHOD *method; |
| |
| if (vent->smeth == NULL || |
| version_cmp(s, client_version, vent->version) < 0) |
| continue; |
| method = vent->smeth(); |
| if (ssl_method_error(s, method) == 0) { |
| check_for_downgrade(s, vent->version, dgrd); |
| s->version = vent->version; |
| s->method = method; |
| return 0; |
| } |
| disabled = 1; |
| } |
| return disabled ? SSL_R_UNSUPPORTED_PROTOCOL : SSL_R_VERSION_TOO_LOW; |
| } |
| |
| /* |
| * ssl_choose_client_version - Choose client (D)TLS version. Called when the |
| * server HELLO is received to select the final client protocol version and |
| * the version specific method. |
| * |
| * @s: client SSL handle. |
| * @version: The proposed version from the server's HELLO. |
| * @checkdgrd: Whether to check the downgrade sentinels in the server_random |
| * @al: Where to store any alert value that may be generated |
| * |
| * Returns 0 on success or an SSL error reason number on failure. |
| */ |
| int ssl_choose_client_version(SSL *s, int version, int checkdgrd, int *al) |
| { |
| const version_info *vent; |
| const version_info *table; |
| int highver = 0; |
| |
| /* TODO(TLS1.3): Remove this before release */ |
| if (version == TLS1_3_VERSION_DRAFT) |
| version = TLS1_3_VERSION; |
| |
| if (s->hello_retry_request && version != TLS1_3_VERSION) { |
| *al = SSL_AD_PROTOCOL_VERSION; |
| return SSL_R_WRONG_SSL_VERSION; |
| } |
| |
| switch (s->method->version) { |
| default: |
| if (version != s->version) { |
| *al = SSL_AD_PROTOCOL_VERSION; |
| return SSL_R_WRONG_SSL_VERSION; |
| } |
| /* |
| * If this SSL handle is not from a version flexible method we don't |
| * (and never did) check min/max, FIPS or Suite B constraints. Hope |
| * that's OK. It is up to the caller to not choose fixed protocol |
| * versions they don't want. If not, then easy to fix, just return |
| * ssl_method_error(s, s->method) |
| */ |
| return 0; |
| case TLS_ANY_VERSION: |
| table = tls_version_table; |
| break; |
| case DTLS_ANY_VERSION: |
| table = dtls_version_table; |
| break; |
| } |
| |
| for (vent = table; vent->version != 0; ++vent) { |
| const SSL_METHOD *method; |
| int err; |
| |
| if (vent->cmeth == NULL) |
| continue; |
| |
| if (highver != 0 && version != vent->version) |
| continue; |
| |
| method = vent->cmeth(); |
| err = ssl_method_error(s, method); |
| if (err != 0) { |
| if (version == vent->version) { |
| *al = SSL_AD_PROTOCOL_VERSION; |
| return err; |
| } |
| |
| continue; |
| } |
| if (highver == 0) |
| highver = vent->version; |
| |
| if (version != vent->version) |
| continue; |
| |
| #ifndef OPENSSL_NO_TLS13DOWNGRADE |
| /* Check for downgrades */ |
| if (checkdgrd) { |
| if (version == TLS1_2_VERSION && highver > version) { |
| if (memcmp(tls12downgrade, |
| s->s3->server_random + SSL3_RANDOM_SIZE |
| - sizeof(tls12downgrade), |
| sizeof(tls12downgrade)) == 0) { |
| *al = SSL_AD_ILLEGAL_PARAMETER; |
| return SSL_R_INAPPROPRIATE_FALLBACK; |
| } |
| } else if (!SSL_IS_DTLS(s) |
| && version < TLS1_2_VERSION |
| && highver > version) { |
| if (memcmp(tls11downgrade, |
| s->s3->server_random + SSL3_RANDOM_SIZE |
| - sizeof(tls11downgrade), |
| sizeof(tls11downgrade)) == 0) { |
| *al = SSL_AD_ILLEGAL_PARAMETER; |
| return SSL_R_INAPPROPRIATE_FALLBACK; |
| } |
| } |
| } |
| #endif |
| |
| s->method = method; |
| s->version = version; |
| return 0; |
| } |
| |
| *al = SSL_AD_PROTOCOL_VERSION; |
| return SSL_R_UNSUPPORTED_PROTOCOL; |
| } |
| |
| /* |
| * ssl_get_min_max_version - get minimum and maximum protocol version |
| * @s: The SSL connection |
| * @min_version: The minimum supported version |
| * @max_version: The maximum supported version |
| * |
| * Work out what version we should be using for the initial ClientHello if the |
| * version is initially (D)TLS_ANY_VERSION. We apply any explicit SSL_OP_NO_xxx |
| * options, the MinProtocol and MaxProtocol configuration commands, any Suite B |
| * constraints and any floor imposed by the security level here, |
| * so we don't advertise the wrong protocol version to only reject the outcome later. |
| * |
| * Computing the right floor matters. If, e.g., TLS 1.0 and 1.2 are enabled, |
| * TLS 1.1 is disabled, but the security level, Suite-B and/or MinProtocol |
| * only allow TLS 1.2, we want to advertise TLS1.2, *not* TLS1. |
| * |
| * Returns 0 on success or an SSL error reason number on failure. On failure |
| * min_version and max_version will also be set to 0. |
| */ |
| int ssl_get_min_max_version(const SSL *s, int *min_version, int *max_version) |
| { |
| int version; |
| int hole; |
| const SSL_METHOD *single = NULL; |
| const SSL_METHOD *method; |
| const version_info *table; |
| const version_info *vent; |
| |
| switch (s->method->version) { |
| default: |
| /* |
| * If this SSL handle is not from a version flexible method we don't |
| * (and never did) check min/max FIPS or Suite B constraints. Hope |
| * that's OK. It is up to the caller to not choose fixed protocol |
| * versions they don't want. If not, then easy to fix, just return |
| * ssl_method_error(s, s->method) |
| */ |
| *min_version = *max_version = s->version; |
| return 0; |
| case TLS_ANY_VERSION: |
| table = tls_version_table; |
| break; |
| case DTLS_ANY_VERSION: |
| table = dtls_version_table; |
| break; |
| } |
| |
| /* |
| * SSL_OP_NO_X disables all protocols above X *if* there are some protocols |
| * below X enabled. This is required in order to maintain the "version |
| * capability" vector contiguous. Any versions with a NULL client method |
| * (protocol version client is disabled at compile-time) is also a "hole". |
| * |
| * Our initial state is hole == 1, version == 0. That is, versions above |
| * the first version in the method table are disabled (a "hole" above |
| * the valid protocol entries) and we don't have a selected version yet. |
| * |
| * Whenever "hole == 1", and we hit an enabled method, its version becomes |
| * the selected version, and the method becomes a candidate "single" |
| * method. We're no longer in a hole, so "hole" becomes 0. |
| * |
| * If "hole == 0" and we hit an enabled method, then "single" is cleared, |
| * as we support a contiguous range of at least two methods. If we hit |
| * a disabled method, then hole becomes true again, but nothing else |
| * changes yet, because all the remaining methods may be disabled too. |
| * If we again hit an enabled method after the new hole, it becomes |
| * selected, as we start from scratch. |
| */ |
| *min_version = version = 0; |
| hole = 1; |
| for (vent = table; vent->version != 0; ++vent) { |
| /* |
| * A table entry with a NULL client method is still a hole in the |
| * "version capability" vector. |
| */ |
| if (vent->cmeth == NULL) { |
| hole = 1; |
| continue; |
| } |
| method = vent->cmeth(); |
| if (ssl_method_error(s, method) != 0) { |
| hole = 1; |
| } else if (!hole) { |
| single = NULL; |
| *min_version = method->version; |
| } else { |
| version = (single = method)->version; |
| *min_version = version; |
| hole = 0; |
| } |
| } |
| |
| *max_version = version; |
| |
| /* Fail if everything is disabled */ |
| if (version == 0) |
| return SSL_R_NO_PROTOCOLS_AVAILABLE; |
| |
| return 0; |
| } |
| |
| /* |
| * ssl_set_client_hello_version - Work out what version we should be using for |
| * the initial ClientHello.legacy_version field. |
| * |
| * @s: client SSL handle. |
| * |
| * Returns 0 on success or an SSL error reason number on failure. |
| */ |
| int ssl_set_client_hello_version(SSL *s) |
| { |
| int ver_min, ver_max, ret; |
| |
| ret = ssl_get_min_max_version(s, &ver_min, &ver_max); |
| |
| if (ret != 0) |
| return ret; |
| |
| s->version = ver_max; |
| |
| /* TLS1.3 always uses TLS1.2 in the legacy_version field */ |
| if (!SSL_IS_DTLS(s) && ver_max > TLS1_2_VERSION) |
| ver_max = TLS1_2_VERSION; |
| |
| s->client_version = ver_max; |
| return 0; |
| } |
| |
| /* |
| * Checks a list of |groups| to determine if the |group_id| is in it. If it is |
| * and |checkallow| is 1 then additionally check if the group is allowed to be |
| * used. Returns 1 if the group is in the list (and allowed if |checkallow| is |
| * 1) or 0 otherwise. |
| */ |
| #ifndef OPENSSL_NO_EC |
| int check_in_list(SSL *s, unsigned int group_id, const unsigned char *groups, |
| size_t num_groups, int checkallow) |
| { |
| size_t i; |
| |
| if (groups == NULL || num_groups == 0) |
| return 0; |
| |
| for (i = 0; i < num_groups; i++, groups += 2) { |
| if (group_id == GET_GROUP_ID(groups, 0) |
| && (!checkallow |
| || tls_curve_allowed(s, groups, SSL_SECOP_CURVE_CHECK))) { |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| /* Replace ClientHello1 in the transcript hash with a synthetic message */ |
| int create_synthetic_message_hash(SSL *s) |
| { |
| unsigned char hashval[EVP_MAX_MD_SIZE]; |
| size_t hashlen = 0; |
| unsigned char msghdr[SSL3_HM_HEADER_LENGTH]; |
| |
| memset(msghdr, 0, sizeof(msghdr)); |
| |
| /* Get the hash of the initial ClientHello */ |
| if (!ssl3_digest_cached_records(s, 0) |
| || !ssl_handshake_hash(s, hashval, sizeof(hashval), &hashlen)) { |
| SSLerr(SSL_F_CREATE_SYNTHETIC_MESSAGE_HASH, ERR_R_INTERNAL_ERROR); |
| return 0; |
| } |
| |
| /* Reinitialise the transcript hash */ |
| if (!ssl3_init_finished_mac(s)) |
| return 0; |
| |
| /* Inject the synthetic message_hash message */ |
| msghdr[0] = SSL3_MT_MESSAGE_HASH; |
| msghdr[SSL3_HM_HEADER_LENGTH - 1] = hashlen; |
| if (!ssl3_finish_mac(s, msghdr, SSL3_HM_HEADER_LENGTH) |
| || !ssl3_finish_mac(s, hashval, hashlen)) { |
| SSLerr(SSL_F_CREATE_SYNTHETIC_MESSAGE_HASH, ERR_R_INTERNAL_ERROR); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static int ca_dn_cmp(const X509_NAME *const *a, const X509_NAME *const *b) |
| { |
| return X509_NAME_cmp(*a, *b); |
| } |
| |
| int parse_ca_names(SSL *s, PACKET *pkt, int *al) |
| { |
| STACK_OF(X509_NAME) *ca_sk = sk_X509_NAME_new(ca_dn_cmp); |
| X509_NAME *xn = NULL; |
| PACKET cadns; |
| |
| if (ca_sk == NULL) { |
| SSLerr(SSL_F_PARSE_CA_NAMES, ERR_R_MALLOC_FAILURE); |
| goto decerr; |
| } |
| /* get the CA RDNs */ |
| if (!PACKET_get_length_prefixed_2(pkt, &cadns)) { |
| *al = SSL_AD_DECODE_ERROR; |
| SSLerr(SSL_F_PARSE_CA_NAMES, SSL_R_LENGTH_MISMATCH); |
| goto decerr; |
| } |
| |
| while (PACKET_remaining(&cadns)) { |
| const unsigned char *namestart, *namebytes; |
| unsigned int name_len; |
| |
| if (!PACKET_get_net_2(&cadns, &name_len) |
| || !PACKET_get_bytes(&cadns, &namebytes, name_len)) { |
| SSLerr(SSL_F_PARSE_CA_NAMES, SSL_R_LENGTH_MISMATCH); |
| goto decerr; |
| } |
| |
| namestart = namebytes; |
| if ((xn = d2i_X509_NAME(NULL, &namebytes, name_len)) == NULL) { |
| SSLerr(SSL_F_PARSE_CA_NAMES, ERR_R_ASN1_LIB); |
| goto decerr; |
| } |
| if (namebytes != (namestart + name_len)) { |
| SSLerr(SSL_F_PARSE_CA_NAMES, SSL_R_CA_DN_LENGTH_MISMATCH); |
| goto decerr; |
| } |
| |
| if (!sk_X509_NAME_push(ca_sk, xn)) { |
| SSLerr(SSL_F_PARSE_CA_NAMES, ERR_R_MALLOC_FAILURE); |
| *al = SSL_AD_INTERNAL_ERROR; |
| goto err; |
| } |
| xn = NULL; |
| } |
| |
| sk_X509_NAME_pop_free(s->s3->tmp.peer_ca_names, X509_NAME_free); |
| s->s3->tmp.peer_ca_names = ca_sk; |
| |
| return 1; |
| |
| decerr: |
| *al = SSL_AD_DECODE_ERROR; |
| err: |
| sk_X509_NAME_pop_free(ca_sk, X509_NAME_free); |
| X509_NAME_free(xn); |
| return 0; |
| } |
| |
| int construct_ca_names(SSL *s, WPACKET *pkt) |
| { |
| const STACK_OF(X509_NAME) *ca_sk = SSL_get0_CA_list(s); |
| |
| /* Start sub-packet for client CA list */ |
| if (!WPACKET_start_sub_packet_u16(pkt)) |
| return 0; |
| |
| if (ca_sk != NULL) { |
| int i; |
| |
| for (i = 0; i < sk_X509_NAME_num(ca_sk); i++) { |
| unsigned char *namebytes; |
| X509_NAME *name = sk_X509_NAME_value(ca_sk, i); |
| int namelen; |
| |
| if (name == NULL |
| || (namelen = i2d_X509_NAME(name, NULL)) < 0 |
| || !WPACKET_sub_allocate_bytes_u16(pkt, namelen, |
| &namebytes) |
| || i2d_X509_NAME(name, &namebytes) != namelen) { |
| return 0; |
| } |
| } |
| } |
| |
| if (!WPACKET_close(pkt)) |
| return 0; |
| |
| return 1; |
| } |
| |
| /* Create a buffer containing data to be signed for server key exchange */ |
| size_t construct_key_exchange_tbs(const SSL *s, unsigned char **ptbs, |
| const void *param, size_t paramlen) |
| { |
| size_t tbslen = 2 * SSL3_RANDOM_SIZE + paramlen; |
| unsigned char *tbs = OPENSSL_malloc(tbslen); |
| |
| if (tbs == NULL) |
| return 0; |
| memcpy(tbs, s->s3->client_random, SSL3_RANDOM_SIZE); |
| memcpy(tbs + SSL3_RANDOM_SIZE, s->s3->server_random, SSL3_RANDOM_SIZE); |
| |
| memcpy(tbs + SSL3_RANDOM_SIZE * 2, param, paramlen); |
| |
| *ptbs = tbs; |
| return tbslen; |
| } |