| $! |
| $! MAKEVMS.COM |
| $! Original Author: UNKNOWN |
| $! Rewritten By: Robert Byer |
| $! Vice-President |
| $! A-Com Computing, Inc. |
| $! byer@mail.all-net.net |
| $! |
| $! Changes by Richard Levitte <richard@levitte.org> |
| $! Zoltan Arpadffy <zoli@polarhome.com> |
| $! |
| $! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" |
| $! "[.xxx.EXE.SSL]LIBSSL.OLB" |
| $! The "xxx" denotes the machine architecture of ALPHA, IA64 or VAX. |
| $! |
| $! This procedures accepts two command line options listed below. |
| $! |
| $! P1 specifies one of the following build options: |
| $! |
| $! ALL Just build "everything". |
| $! CONFIG Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file. |
| $! BUILDINF Just build the "[.CRYPTO._xxx]BUILDINF.H" file. |
| $! SOFTLINKS Just fix the Unix soft links. |
| $! BUILDALL Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done. |
| $! CRYPTO Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library. |
| $! CRYPTO/x Just build the x part of the |
| $! "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library. |
| $! SSL Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library. |
| $! SSL_TASK Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program. |
| $! TEST Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL. |
| $! APPS Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL. |
| $! ENGINES Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL. |
| $! |
| $! P2, if defined, specifies the C pointer size. Ignored on VAX. |
| $! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.) |
| $! Supported values are: |
| $! |
| $! "" Compile with default (/NOPOINTER_SIZE). |
| $! 32 Compile with /POINTER_SIZE=32 (SHORT). |
| $! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]). |
| $! (Automatically select ARGV if compiler supports it.) |
| $! 64= Compile with /POINTER_SIZE=64 (LONG). |
| $! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV). |
| $! |
| $! P3 specifies DEBUG or NODEBUG, to compile with or without debugging |
| $! information. |
| $! |
| $! P4 specifies which compiler to try to compile under. |
| $! |
| $! VAXC For VAX C. |
| $! DECC For DEC C. |
| $! GNUC For GNU C. |
| $! LINK To only link the programs from existing object files. |
| $! (not yet implemented) |
| $! |
| $! If you don't specify a compiler, it will try to determine which |
| $! "C" compiler to use. |
| $! |
| $! P5, if defined, sets a TCP/IP library to use, through one of the following |
| $! keywords: |
| $! |
| $! UCX for UCX or UCX emulation |
| $! TCPIP for TCP/IP Services or TCP/IP Services emulation |
| $! (this is prefered over UCX) |
| $! SOCKETSHR for SOCKETSHR+NETLIB |
| $! NONE to avoid specifying which TCP/IP implementation to |
| $! use at build time (this works with DEC C). This is |
| $! the default. |
| $! |
| $! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up). |
| $! |
| $! P7, if defined, specifies a directory where ZLIB files (zlib.h, |
| $! libz.olb) may be found. Optionally, a non-default object library |
| $! name may be included ("dev:[dir]libz_64.olb", for example). |
| $! |
| $! |
| $! Announce/identify. |
| $! |
| $ proc = f$environment( "procedure") |
| $ write sys$output "@@@ "+ - |
| f$parse( proc, , , "name")+ f$parse( proc, , , "type") |
| $! |
| $ DEF_ORIG = F$ENVIRONMENT( "DEFAULT") |
| $ ON ERROR THEN GOTO TIDY |
| $ ON CONTROL_C THEN GOTO TIDY |
| $! |
| $! Check if we're in a batch job, and make sure we get to |
| $! the directory this script is in |
| $! |
| $ IF F$MODE() .EQS. "BATCH" |
| $ THEN |
| $ COMNAME=F$ENVIRONMENT("PROCEDURE") |
| $ COMPATH=F$PARSE("A.;",COMNAME) - "A.;" |
| $ SET DEF 'COMPATH' |
| $ ENDIF |
| $! |
| $! Check What Architecture We Are Using. |
| $! |
| $ IF (F$GETSYI("CPU").LT.128) |
| $ THEN |
| $! |
| $! The Architecture Is VAX. |
| $! |
| $ ARCH = "VAX" |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! The Architecture Is Alpha, IA64 or whatever comes in the future. |
| $! |
| $ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE") |
| $ IF (ARCH .EQS. "") THEN ARCH = "UNK" |
| $! |
| $! End The Architecture Check. |
| $! |
| $ ENDIF |
| $! |
| $ ARCHD = ARCH |
| $ LIB32 = "32" |
| $ POINTER_SIZE = "" |
| $! |
| $! Get VMS version. |
| $! |
| $ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM") |
| $! |
| $! Check To Make Sure We Have Valid Command Line Parameters. |
| $! |
| $ GOSUB CHECK_OPTIONS |
| $! |
| $! Check To See What We Are To Do. |
| $! |
| $ IF (BUILDCOMMAND.EQS."ALL") |
| $ THEN |
| $! |
| $! Start with building the OpenSSL configuration file. |
| $! |
| $ GOSUB CONFIG |
| $! |
| $! Create The "BUILDINF.H" Include File. |
| $! |
| $ GOSUB BUILDINF |
| $! |
| $! Fix The Unix Softlinks. |
| $! |
| $ GOSUB SOFTLINKS |
| $! |
| $ ENDIF |
| $! |
| $ IF (BUILDCOMMAND.EQS."ALL".OR.BUILDCOMMAND.EQS."BUILDALL") |
| $ THEN |
| $! |
| $! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library. |
| $! |
| $ GOSUB CRYPTO |
| $! |
| $! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library. |
| $! |
| $ GOSUB SSL |
| $! |
| $! Build The [.xxx.EXE.SSL]SSL_TASK.EXE DECNet SSL Engine. |
| $! |
| $ GOSUB SSL_TASK |
| $! |
| $! Build The [.xxx.EXE.TEST] OpenSSL Test Utilities. |
| $! |
| $ GOSUB TEST |
| $! |
| $! Build The [.xxx.EXE.APPS] OpenSSL Application Utilities. |
| $! |
| $ GOSUB APPS |
| $! |
| $! Build The [.xxx.EXE.ENGINES] OpenSSL Shareable Engines. |
| $! |
| $ GOSUB ENGINES |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! Build Just What The User Wants Us To Build. |
| $! |
| $ GOSUB 'BUILDCOMMAND' |
| $! |
| $ ENDIF |
| $! |
| $! Time To EXIT. |
| $! |
| $ GOTO TIDY |
| $! |
| $! Rebuild The [.CRYPTO._xxx]OPENSSLCONF.H" file. |
| $! |
| $ CONFIG: |
| $! |
| $! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File. |
| $! |
| $ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']OPENSSLCONF.H Include File." |
| $! |
| $! First, make sure the directory exists. |
| $! |
| $ IF F$PARSE("SYS$DISK:[.CRYPTO.''ARCHD']") .EQS. "" THEN - |
| CREATE/DIRECTORY SYS$DISK:[.CRYPTO.'ARCHD'] |
| $! |
| $! Different tar/UnZip versions/option may have named the file differently |
| $ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. "" |
| $ THEN |
| $ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h_in" |
| $ ELSE |
| $ IF F$SEARCH( "[.crypto]opensslconf_h.in") .NES. "" |
| $ THEN |
| $ OPENSSLCONF_H_IN = "[.crypto]opensslconf_h.in" |
| $ ELSE |
| $ ! For ODS-5 |
| $ IF F$SEARCH( "[.crypto]opensslconf.h.in") .NES. "" |
| $ THEN |
| $ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h.in" |
| $ ELSE |
| $ WRITE SYS$ERROR "Couldn't find a [.crypto]opensslconf.h.in. Exiting!" |
| $ $STATUS = %X00018294 ! "%RMS-F-FNF, file not found". |
| $ GOTO TIDY |
| $ ENDIF |
| $ ENDIF |
| $ ENDIF |
| $! |
| $! Create The [.CRYPTO._xxx]OPENSSLCONF.H File. |
| $! Make sure it has the right format. |
| $! |
| $ OSCH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']OPENSSLCONF.H" |
| $ CREATE /FDL=SYS$INPUT: 'OSCH_NAME' |
| RECORD |
| FORMAT stream_lf |
| $ OPEN /APPEND H_FILE 'OSCH_NAME' |
| $! |
| $! Write The [.CRYPTO._xxx]OPENSSLCONF.H File. |
| $! |
| $ WRITE H_FILE "/* This file was automatically built using makevms.com */" |
| $ WRITE H_FILE "/* and ''OPENSSLCONF_H_IN' */" |
| $! |
| $! Write a few macros that indicate how this system was built. |
| $! |
| $ WRITE H_FILE "" |
| $ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS" |
| $ WRITE H_FILE "# define OPENSSL_SYS_VMS" |
| $ WRITE H_FILE "#endif" |
| $ |
| $! One of the best way to figure out what the list should be is to do |
| $! the following on a Unix system: |
| $! grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq |
| $! For that reason, the list will also always end up in alphabetical order |
| $ CONFIG_LOGICALS := AES,- |
| ASM,INLINE_ASM,- |
| BF,- |
| BIO,- |
| BUFFER,- |
| BUF_FREELISTS,- |
| CAMELLIA,- |
| CAST,- |
| CMS,- |
| COMP,- |
| DEPRECATED,- |
| DES,- |
| DGRAM,- |
| DH,- |
| DSA,- |
| EC,- |
| EC2M,- |
| ECDH,- |
| ECDSA,- |
| EC_NISTP_64_GCC_128,- |
| ENGINE,- |
| ERR,- |
| EVP,- |
| FP_API,- |
| GMP,- |
| GOST,- |
| HASH_COMP,- |
| HMAC,- |
| IDEA,- |
| JPAKE,- |
| KRB5,- |
| LHASH,- |
| MD2,- |
| MD4,- |
| MD5,- |
| MDC2,- |
| NEXTPROTONEG,- |
| OCSP,- |
| PSK,- |
| RC2,- |
| RC4,- |
| RC5,- |
| RFC3779,- |
| RIPEMD,- |
| RSA,- |
| SEED,- |
| SHA,- |
| SHA0,- |
| SHA1,- |
| SHA256,- |
| SHA512,- |
| SOCK,- |
| SRP,- |
| SSL_INTERN,- |
| STACK,- |
| STATIC_ENGINE,- |
| STDIO,- |
| STORE,- |
| TLSEXT,- |
| WHIRLPOOL,- |
| X509 |
| $! Add a few that we know about |
| $ CONFIG_LOGICALS := 'CONFIG_LOGICALS',- |
| THREADS |
| $! The following rules, which dictate how some algorithm choices affect |
| $! others, are picked from Configure. |
| $! Quick syntax: |
| $! list = item[ ; list] |
| $! item = algos / dependents |
| $! algos = algo [, algos] |
| $! dependents = dependent [, dependents] |
| $! When a list of algos is specified in one item, it means that they must |
| $! all be disabled for the rule to apply. |
| $! When a list of dependents is specified in one item, it means that they |
| $! will all be disabled if the rule applies. |
| $! Rules are checked sequentially. If a rule disables an algorithm, it will |
| $! affect all following rules that depend on that algorithm being disabled. |
| $! To force something to be enabled or disabled, have no algorithms in the |
| $! algos part. |
| $ CONFIG_DISABLE_RULES := RIJNDAEL/AES;- |
| DES/MDC2;- |
| EC/ECDSA,ECDH;- |
| MD5/SSL3,TLS1;- |
| SHA/SSL3,TLS1;- |
| DH/SSL3,TLS1;- |
| TLS1/TLSEXT;- |
| EC/GOST;- |
| DSA/GOST;- |
| DH/GOST;- |
| /STATIC_ENGINE;- |
| /KRB5;- |
| /EC_NISTP_64_GCC_128 |
| $ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;- |
| /THREADS |
| $ |
| $! Architecture specific rule addtions |
| $ IF ARCH .EQS. "VAX" |
| $ THEN |
| $ ! Disable algorithms that require 64-bit integers in C |
| $ CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + - |
| ";/GOST" + - |
| ";/WHIRLPOOL" |
| $ ENDIF |
| $ |
| $ CONFIG_LOG_I = 0 |
| $ CONFIG_LOG_LOOP1: |
| $ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM") |
| $ CONFIG_LOG_I = CONFIG_LOG_I + 1 |
| $ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP1 |
| $ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP1_END |
| $ IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E) |
| $ THEN |
| $ CONFIG_DISABLED_'CONFIG_LOG_E' := YES |
| $ CONFIG_ENABLED_'CONFIG_LOG_E' := NO |
| $ CONFIG_CHANGED_'CONFIG_LOG_E' := YES |
| $ ELSE |
| $ CONFIG_DISABLED_'CONFIG_LOG_E' := NO |
| $ CONFIG_ENABLED_'CONFIG_LOG_E' := YES |
| $ ! Because all algorithms are assumed enabled by default |
| $ CONFIG_CHANGED_'CONFIG_LOG_E' := NO |
| $ ENDIF |
| $ GOTO CONFIG_LOG_LOOP1 |
| $ CONFIG_LOG_LOOP1_END: |
| $ |
| $! Apply cascading disable rules |
| $ CONFIG_DISABLE_I = 0 |
| $ CONFIG_DISABLE_LOOP0: |
| $ CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";", - |
| CONFIG_DISABLE_RULES),"TRIM") |
| $ CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1 |
| $ IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0 |
| $ IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END |
| $ |
| $ CONFIG_DISABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_DISABLE_E),"TRIM") |
| $ CONFIG_DISABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_DISABLE_E),"TRIM") |
| $ TO_DISABLE := YES |
| $ CONFIG_ALGO_I = 0 |
| $ CONFIG_DISABLE_LOOP1: |
| $ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", - |
| CONFIG_DISABLE_ALGOS),"TRIM") |
| $ CONFIG_ALGO_I = CONFIG_ALGO_I + 1 |
| $ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1 |
| $ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END |
| $ IF F$TYPE(CONFIG_DISABLED_'CONFIG_ALGO_E') .EQS. "" |
| $ THEN |
| $ TO_DISABLE := NO |
| $ ELSE |
| $ IF .NOT. CONFIG_DISABLED_'CONFIG_ALGO_E' THEN TO_DISABLE := NO |
| $ ENDIF |
| $ GOTO CONFIG_DISABLE_LOOP1 |
| $ CONFIG_DISABLE_LOOP1_END: |
| $ |
| $ IF TO_DISABLE |
| $ THEN |
| $ CONFIG_DEPENDENT_I = 0 |
| $ CONFIG_DISABLE_LOOP2: |
| $ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", - |
| CONFIG_DISABLE_DEPENDENTS),"TRIM") |
| $ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1 |
| $ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2 |
| $ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END |
| $ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := YES |
| $ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO |
| $ ! Better not to assume defaults at this point... |
| $ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES |
| $ WRITE SYS$ERROR - |
| "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'" |
| $ GOTO CONFIG_DISABLE_LOOP2 |
| $ CONFIG_DISABLE_LOOP2_END: |
| $ ENDIF |
| $ GOTO CONFIG_DISABLE_LOOP0 |
| $ CONFIG_DISABLE_LOOP0_END: |
| $ |
| $! Apply cascading enable rules |
| $ CONFIG_ENABLE_I = 0 |
| $ CONFIG_ENABLE_LOOP0: |
| $ CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";", - |
| CONFIG_ENABLE_RULES),"TRIM") |
| $ CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1 |
| $ IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0 |
| $ IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END |
| $ |
| $ CONFIG_ENABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_ENABLE_E),"TRIM") |
| $ CONFIG_ENABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_ENABLE_E),"TRIM") |
| $ TO_ENABLE := YES |
| $ CONFIG_ALGO_I = 0 |
| $ CONFIG_ENABLE_LOOP1: |
| $ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", - |
| CONFIG_ENABLE_ALGOS),"TRIM") |
| $ CONFIG_ALGO_I = CONFIG_ALGO_I + 1 |
| $ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1 |
| $ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END |
| $ IF F$TYPE(CONFIG_ENABLED_'CONFIG_ALGO_E') .EQS. "" |
| $ THEN |
| $ TO_ENABLE := NO |
| $ ELSE |
| $ IF .NOT. CONFIG_ENABLED_'CONFIG_ALGO_E' THEN TO_ENABLE := NO |
| $ ENDIF |
| $ GOTO CONFIG_ENABLE_LOOP1 |
| $ CONFIG_ENABLE_LOOP1_END: |
| $ |
| $ IF TO_ENABLE |
| $ THEN |
| $ CONFIG_DEPENDENT_I = 0 |
| $ CONFIG_ENABLE_LOOP2: |
| $ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", - |
| CONFIG_ENABLE_DEPENDENTS),"TRIM") |
| $ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1 |
| $ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2 |
| $ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END |
| $ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := NO |
| $ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES |
| $ ! Better not to assume defaults at this point... |
| $ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES |
| $ WRITE SYS$ERROR - |
| "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'" |
| $ GOTO CONFIG_ENABLE_LOOP2 |
| $ CONFIG_ENABLE_LOOP2_END: |
| $ ENDIF |
| $ GOTO CONFIG_ENABLE_LOOP0 |
| $ CONFIG_ENABLE_LOOP0_END: |
| $ |
| $! Write to the configuration |
| $ CONFIG_LOG_I = 0 |
| $ CONFIG_LOG_LOOP2: |
| $ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM") |
| $ CONFIG_LOG_I = CONFIG_LOG_I + 1 |
| $ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2 |
| $ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END |
| $ IF CONFIG_CHANGED_'CONFIG_LOG_E' |
| $ THEN |
| $ IF CONFIG_DISABLED_'CONFIG_LOG_E' |
| $ THEN |
| $ WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E |
| $ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E |
| $ WRITE H_FILE "#endif" |
| $ ELSE |
| $ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E |
| $ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E |
| $ WRITE H_FILE "#endif" |
| $ ENDIF |
| $ ENDIF |
| $ GOTO CONFIG_LOG_LOOP2 |
| $ CONFIG_LOG_LOOP2_END: |
| $! |
| $ WRITE H_FILE "" |
| $ WRITE H_FILE "/* 2011-02-23 SMS." |
| $ WRITE H_FILE " * On VMS (V8.3), setvbuf() doesn't support a 64-bit" |
| $ WRITE H_FILE " * ""in"" pointer, and the help says:" |
| $ WRITE H_FILE " * Please note that the previously documented" |
| $ WRITE H_FILE " * value _IONBF is not supported." |
| $ WRITE H_FILE " * So, skip it on VMS." |
| $ WRITE H_FILE " */" |
| $ WRITE H_FILE "#define OPENSSL_NO_SETVBUF_IONBF" |
| $ WRITE H_FILE "/* STCP support comes with TCPIP 5.7 ECO 2 " |
| $ WRITE H_FILE " * enable on newer systems / 2012-02-24 arpadffy */" |
| $ WRITE H_FILE "#define OPENSSL_NO_SCTP" |
| $ WRITE H_FILE "" |
| $! |
| $! Add in the common "crypto/opensslconf.h.in". |
| $! |
| $ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE: |
| $! |
| $ IF ARCH .NES. "VAX" |
| $ THEN |
| $! |
| $! Write the non-VAX specific data |
| $! |
| $ WRITE H_FILE "#if defined(HEADER_RC4_H)" |
| $ WRITE H_FILE "#undef RC4_INT" |
| $ WRITE H_FILE "#define RC4_INT unsigned int" |
| $ WRITE H_FILE "#undef RC4_CHUNK" |
| $ WRITE H_FILE "#define RC4_CHUNK unsigned long long" |
| $ WRITE H_FILE "#endif" |
| $! |
| $ WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)" |
| $ WRITE H_FILE "#undef DES_LONG" |
| $ WRITE H_FILE "#define DES_LONG unsigned int" |
| $ WRITE H_FILE "#undef DES_PTR" |
| $ WRITE H_FILE "#define DES_PTR" |
| $ WRITE H_FILE "#undef DES_RISC1" |
| $ WRITE H_FILE "#undef DES_RISC2" |
| $ WRITE H_FILE "#define DES_RISC1" |
| $ WRITE H_FILE "#undef DES_UNROLL" |
| $ WRITE H_FILE "#define DES_UNROLL" |
| $ WRITE H_FILE "#endif" |
| $! |
| $ WRITE H_FILE "#if defined(HEADER_BN_H)" |
| $ WRITE H_FILE "#undef BN_LLONG" ! Never define with SIXTY_FOUR_BIT |
| $ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG" |
| $ WRITE H_FILE "#undef SIXTY_FOUR_BIT" |
| $ WRITE H_FILE "#define SIXTY_FOUR_BIT" |
| $ WRITE H_FILE "#undef THIRTY_TWO_BIT" |
| $ WRITE H_FILE "#undef SIXTEEN_BIT" |
| $ WRITE H_FILE "#undef EIGHT_BIT" |
| $ WRITE H_FILE "#endif" |
| $ |
| $ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION" |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! Write the VAX specific data |
| $! |
| $ WRITE H_FILE "#if defined(HEADER_RC4_H)" |
| $ WRITE H_FILE "#undef RC4_INT" |
| $ WRITE H_FILE "#define RC4_INT unsigned char" |
| $ WRITE H_FILE "#undef RC4_CHUNK" |
| $ WRITE H_FILE "#define RC4_CHUNK unsigned long" |
| $ WRITE H_FILE "#endif" |
| $! |
| $ WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)" |
| $ WRITE H_FILE "#undef DES_LONG" |
| $ WRITE H_FILE "#define DES_LONG unsigned long" |
| $ WRITE H_FILE "#undef DES_PTR" |
| $ WRITE H_FILE "#define DES_PTR" |
| $ WRITE H_FILE "#undef DES_RISC1" |
| $ WRITE H_FILE "#undef DES_RISC2" |
| $ WRITE H_FILE "#undef DES_UNROLL" |
| $ WRITE H_FILE "#endif" |
| $! |
| $ WRITE H_FILE "#if defined(HEADER_BN_H)" |
| $ WRITE H_FILE "#undef BN_LLONG" ! VAX C/DEC C doesn't have long long |
| $ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG" |
| $ WRITE H_FILE "#undef SIXTY_FOUR_BIT" |
| $ WRITE H_FILE "#undef THIRTY_TWO_BIT" |
| $ WRITE H_FILE "#define THIRTY_TWO_BIT" |
| $ WRITE H_FILE "#undef SIXTEEN_BIT" |
| $ WRITE H_FILE "#undef EIGHT_BIT" |
| $ WRITE H_FILE "#endif" |
| $! |
| $! Oddly enough, the following symbol is tested in crypto/sha/sha512.c |
| $! before sha.h gets included (and HEADER_SHA_H defined), so we will not |
| $! protect this one... |
| $ WRITE H_FILE "#undef OPENSSL_NO_SHA512" |
| $ WRITE H_FILE "#define OPENSSL_NO_SHA512" |
| $! |
| $ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION" |
| $ WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION" |
| $! |
| $! End |
| $! |
| $ ENDIF |
| $! |
| $! Close the [.CRYPTO._xxx]OPENSSLCONF.H file |
| $! |
| $ CLOSE H_FILE |
| $! |
| $! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file |
| $! |
| $ PURGE SYS$DISK:[.CRYPTO.'ARCHD']OPENSSLCONF.H |
| $! |
| $! That's All, Time To RETURN. |
| $! |
| $ RETURN |
| $! |
| $! Rebuild The "[.CRYPTO._xxx]BUILDINF.H" file. |
| $! |
| $ BUILDINF: |
| $! |
| $! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File. |
| $! |
| $ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']BUILDINF.H Include File." |
| $! |
| $! Create The [.CRYPTO._xxx]BUILDINF.H File. |
| $! |
| $ BIH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']BUILDINF.H" |
| $ CREATE /FDL=SYS$INPUT: 'BIH_NAME' |
| RECORD |
| FORMAT stream_lf |
| $! |
| $ OPEN /APPEND H_FILE 'bih_name' |
| $! |
| $! Get The Current Date & Time. |
| $! |
| $ TIME = F$TIME() |
| $! |
| $! Write The [.CRYPTO._xxx]BUILDINF.H File. |
| $! |
| $ CFLAGS = "" |
| $ if (POINTER_SIZE .nes. "") |
| $ then |
| $ CFLAGS = CFLAGS+ "/POINTER_SIZE=''POINTER_SIZE'" |
| $ endif |
| $ if (ZLIB .nes. "") |
| $ then |
| $ if (CFLAGS .nes. "") then CFLAGS = CFLAGS+ " " |
| $ CFLAGS = CFLAGS+ "/DEFINE=ZLIB" |
| $ endif |
| $! |
| $ WRITE H_FILE "#define CFLAGS ""''CFLAGS'""" |
| $ WRITE H_FILE "#define PLATFORM ""VMS ''ARCHD' ''VMS_VERSION'""" |
| $ WRITE H_FILE "#define DATE ""''TIME'"" " |
| $! |
| $! Close The [.CRYPTO._xxx]BUILDINF.H File. |
| $! |
| $ CLOSE H_FILE |
| $! |
| $! Purge The [.CRYPTO._xxx]BUILDINF.H File. |
| $! |
| $ PURGE SYS$DISK:[.CRYPTO.'ARCHD']BUILDINF.H |
| $! |
| $! Delete [.CRYPTO]BUILDINF.H File, as there might be some residue from Unix. |
| $! |
| $ IF F$SEARCH("[.CRYPTO]BUILDINF.H") .NES. "" THEN - |
| DELETE SYS$DISK:[.CRYPTO]BUILDINF.H;* |
| $! |
| $! That's All, Time To RETURN. |
| $! |
| $ RETURN |
| $! |
| $! Copy a lot of files around. |
| $! |
| $ SOFTLINKS: |
| $! |
| $!!!! Tell The User We Are Partly Rebuilding The [.APPS] Directory. |
| $!!!! |
| $!!! WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C', '[.APPS]MD5.C' And '[.APPS]RD160.C' Files." |
| $!!!! |
| $!!! DELETE SYS$DISK:[.APPS]MD4.C;*,MD5.C;*,RMD160.C;* |
| $!!!! |
| $!!!! Copy MD4.C from [.CRYPTO.MD4] into [.APPS] |
| $!!!! |
| $!!! COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS] |
| $!!!! |
| $!!!! Copy MD5.C from [.CRYPTO.MD5] into [.APPS] |
| $!!!! Tell The User We Are Rebuilding The [.include.openssl] Directory. |
| $!!!! |
| $!!!! Copy RMD160.C from [.CRYPTO.RIPEMD] into [.APPS] |
| $!!!! |
| $!!! COPY SYS$DISK:[.CRYPTO.RIPEMD]RMD160.C SYS$DISK:[.APPS] |
| $! |
| $! Ensure that the [.include.openssl] directory contains a full set of |
| $! real header files. The distribution kit may have left real or fake |
| $! symlinks there. Rather than think about what's there, simply delete |
| $! the destination files (fake or real symlinks) before copying the real |
| $! header files in. (Copying a real header file onto a real symlink |
| $! merely duplicates the real header file at its source.) |
| $! |
| $! Tell The User We Are Rebuilding The [.include.openssl] Directory. |
| $! |
| $ WRITE SYS$OUTPUT "Rebuilding The '[.include.openssl]' Directory." |
| $! |
| $! First, make sure the directory exists. If it did exist, delete all |
| $! the existing header files (or fake or real symlinks). |
| $! |
| $ if f$parse( "sys$disk:[.include.openssl]") .eqs. "" |
| $ then |
| $ create /directory sys$disk:[.include.openssl] |
| $ else |
| $ delete sys$disk:[.include.openssl]*.h;* |
| $ endif |
| $! |
| $! Copy All The ".H" Files From The Main Directory. |
| $! |
| $ EXHEADER := e_os2.h |
| $ copy 'exheader' sys$disk:[.include.openssl] |
| $! |
| $! Copy All The ".H" Files From The [.CRYPTO] Directory Tree. |
| $! |
| $ SDIRS := , - |
| 'ARCHD', - |
| OBJECTS, - |
| MD2, MD4, MD5, SHA, MDC2, HMAC, RIPEMD, WHRLPOOL, - |
| DES, AES, RC2, RC4, RC5, IDEA, BF, CAST, CAMELLIA, SEED, MODES, - |
| BN, EC, RSA, DSA, ECDSA, DH, ECDH, DSO, ENGINE, - |
| BUFFER, BIO, STACK, LHASH, RAND, ERR, - |
| EVP, ASN1, PEM, X509, X509V3, CONF, TXT_DB, PKCS7, PKCS12, - |
| COMP, OCSP, UI, KRB5, - |
| CMS, PQUEUE, TS, JPAKE, SRP, STORE, CMAC |
| $! |
| $ EXHEADER_ := crypto.h, opensslv.h, ebcdic.h, symhacks.h, ossl_typ.h |
| $ EXHEADER_'ARCHD' := opensslconf.h |
| $ EXHEADER_OBJECTS := objects.h, obj_mac.h |
| $ EXHEADER_MD2 := md2.h |
| $ EXHEADER_MD4 := md4.h |
| $ EXHEADER_MD5 := md5.h |
| $ EXHEADER_SHA := sha.h |
| $ EXHEADER_MDC2 := mdc2.h |
| $ EXHEADER_HMAC := hmac.h |
| $ EXHEADER_RIPEMD := ripemd.h |
| $ EXHEADER_WHRLPOOL := whrlpool.h |
| $ EXHEADER_DES := des.h, des_old.h |
| $ EXHEADER_AES := aes.h |
| $ EXHEADER_RC2 := rc2.h |
| $ EXHEADER_RC4 := rc4.h |
| $ EXHEADER_RC5 := rc5.h |
| $ EXHEADER_IDEA := idea.h |
| $ EXHEADER_BF := blowfish.h |
| $ EXHEADER_CAST := cast.h |
| $ EXHEADER_CAMELLIA := camellia.h |
| $ EXHEADER_SEED := seed.h |
| $ EXHEADER_MODES := modes.h |
| $ EXHEADER_BN := bn.h |
| $ EXHEADER_EC := ec.h |
| $ EXHEADER_RSA := rsa.h |
| $ EXHEADER_DSA := dsa.h |
| $ EXHEADER_ECDSA := ecdsa.h |
| $ EXHEADER_DH := dh.h |
| $ EXHEADER_ECDH := ecdh.h |
| $ EXHEADER_DSO := dso.h |
| $ EXHEADER_ENGINE := engine.h |
| $ EXHEADER_BUFFER := buffer.h |
| $ EXHEADER_BIO := bio.h |
| $ EXHEADER_STACK := stack.h, safestack.h |
| $ EXHEADER_LHASH := lhash.h |
| $ EXHEADER_RAND := rand.h |
| $ EXHEADER_ERR := err.h |
| $ EXHEADER_EVP := evp.h |
| $ EXHEADER_ASN1 := asn1.h, asn1_mac.h, asn1t.h |
| $ EXHEADER_PEM := pem.h, pem2.h |
| $ EXHEADER_X509 := x509.h, x509_vfy.h |
| $ EXHEADER_X509V3 := x509v3.h |
| $ EXHEADER_CONF := conf.h, conf_api.h |
| $ EXHEADER_TXT_DB := txt_db.h |
| $ EXHEADER_PKCS7 := pkcs7.h |
| $ EXHEADER_PKCS12 := pkcs12.h |
| $ EXHEADER_COMP := comp.h |
| $ EXHEADER_OCSP := ocsp.h |
| $ EXHEADER_UI := ui.h, ui_compat.h |
| $ EXHEADER_KRB5 := krb5_asn.h |
| $ EXHEADER_CMS := cms.h |
| $ EXHEADER_PQUEUE := pqueue.h |
| $ EXHEADER_TS := ts.h |
| $ EXHEADER_JPAKE := jpake.h |
| $ EXHEADER_SRP := srp.h |
| $!!! EXHEADER_STORE := store.h, str_compat.h |
| $ EXHEADER_STORE := store.h |
| $ EXHEADER_CMAC := cmac.h |
| $! |
| $ i = 0 |
| $ loop_sdirs: |
| $ sdir = f$edit( f$element( i, ",", sdirs), "trim") |
| $ i = i + 1 |
| $ if (sdir .eqs. ",") then goto loop_sdirs_end |
| $ hdr_list = exheader_'sdir' |
| $ if (sdir .nes. "") then sdir = "."+ sdir |
| $ copy [.crypto'sdir']'hdr_list' sys$disk:[.include.openssl] |
| $ goto loop_sdirs |
| $ loop_sdirs_end: |
| $! |
| $! Copy All The ".H" Files From The [.SSL] Directory. |
| $! |
| $! (keep these in the same order as ssl/Makefile) |
| $ EXHEADER := ssl.h, ssl2.h, ssl3.h, ssl23.h, tls1.h, dtls1.h, kssl.h |
| $ copy sys$disk:[.ssl]'exheader' sys$disk:[.include.openssl] |
| $! |
| $! Purge the [.include.openssl] header files. |
| $! |
| $ purge sys$disk:[.include.openssl]*.h |
| $! |
| $! That's All, Time To RETURN. |
| $! |
| $ RETURN |
| $! |
| $! Build The "[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB" Library. |
| $! |
| $ CRYPTO: |
| $! |
| $! Tell The User What We Are Doing. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT - |
| "Building The [.",ARCHD,".EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB Library." |
| $! |
| $! Go To The [.CRYPTO] Directory. |
| $! |
| $ SET DEFAULT SYS$DISK:[.CRYPTO] |
| $! |
| $! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library. |
| $! |
| $ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" - |
| "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'" |
| $! |
| $! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications. |
| $! |
| $ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" - |
| "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'" |
| $! |
| $! Go Back To The Main Directory. |
| $! |
| $ SET DEFAULT [-] |
| $! |
| $! Time To RETURN. |
| $! |
| $ RETURN |
| $! |
| $! Build The "[.xxx.EXE.SSL]SSL_LIBSSL''LIB32'.OLB" Library. |
| $! |
| $ SSL: |
| $! |
| $! Tell The User What We Are Doing. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT - |
| "Building The [.",ARCHD,".EXE.SSL]SSL_LIBSSL''LIB32'.OLB Library." |
| $! |
| $! Go To The [.SSL] Directory. |
| $! |
| $ SET DEFAULT SYS$DISK:[.SSL] |
| $! |
| $! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library. |
| $! |
| $ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" - |
| "''ISSEVEN'" "''POINTER_SIZE'" "''ZLIB'" |
| $! |
| $! Go Back To The Main Directory. |
| $! |
| $ SET DEFAULT [-] |
| $! |
| $! Time To Return. |
| $! |
| $ RETURN |
| $! |
| $! Build The "[.xxx.EXE.SSL]SSL_TASK.EXE" Program. |
| $! |
| $ SSL_TASK: |
| $! |
| $! Tell The User What We Are Doing. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT - |
| "Building DECNet Based SSL Engine, [.",ARCHD,".EXE.SSL]SSL_TASK.EXE" |
| $! |
| $! Go To The [.SSL] Directory. |
| $! |
| $ SET DEFAULT SYS$DISK:[.SSL] |
| $! |
| $! Build The [.xxx.EXE.SSL]SSL_TASK.EXE |
| $! |
| $ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" - |
| "''ISSEVEN'" "''POINTER_SIZE'" "''ZLIB'" |
| $! |
| $! Go Back To The Main Directory. |
| $! |
| $ SET DEFAULT [-] |
| $! |
| $! That's All, Time To RETURN. |
| $! |
| $ RETURN |
| $! |
| $! Build The OpenSSL Test Programs. |
| $! |
| $ TEST: |
| $! |
| $! Tell The User What We Are Doing. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCHD,".EXE.TEST] Test Utilities." |
| $! |
| $! Go To The [.TEST] Directory. |
| $! |
| $ SET DEFAULT SYS$DISK:[.TEST] |
| $! |
| $! Build The Test Programs. |
| $! |
| $ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" - |
| "''POINTER_SIZE'" "''ZLIB'" |
| $! |
| $! Go Back To The Main Directory. |
| $! |
| $ SET DEFAULT [-] |
| $! |
| $! That's All, Time To RETURN. |
| $! |
| $ RETURN |
| $! |
| $! Build The OpenSSL Application Programs. |
| $! |
| $ APPS: |
| $! |
| $! Tell The User What We Are Doing. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.APPS] Applications." |
| $! |
| $! Go To The [.APPS] Directory. |
| $! |
| $ SET DEFAULT SYS$DISK:[.APPS] |
| $! |
| $! Build The Application Programs. |
| $! |
| $ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" - |
| "" "''POINTER_SIZE'" "''ZLIB'" |
| $! |
| $! Go Back To The Main Directory. |
| $! |
| $ SET DEFAULT [-] |
| $! |
| $! That's All, Time To RETURN. |
| $! |
| $ RETURN |
| $! |
| $! Build The OpenSSL Application Programs. |
| $! |
| $ ENGINES: |
| $! |
| $! Tell The User What We Are Doing. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.ENGINES] Engines." |
| $! |
| $! Go To The [.ENGINES] Directory. |
| $! |
| $ SET DEFAULT SYS$DISK:[.ENGINES] |
| $! |
| $! Build The Application Programs. |
| $! |
| $ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" - |
| "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'" |
| $! |
| $! Go Back To The Main Directory. |
| $! |
| $ SET DEFAULT [-] |
| $! |
| $! That's All, Time To RETURN. |
| $! |
| $ RETURN |
| $! |
| $! Check The User's Options. |
| $! |
| $ CHECK_OPTIONS: |
| $! |
| $! Check if there's a "part", and separate it out |
| $! |
| $ BUILDPART = F$ELEMENT(1,"/",P1) |
| $ IF BUILDPART .EQS. "/" |
| $ THEN |
| $ BUILDPART = "" |
| $ ELSE |
| $ P1 = F$EXTRACT(0,F$LENGTH(P1) - F$LENGTH(BUILDPART) - 1, P1) |
| $ ENDIF |
| $! |
| $! Check To See If P1 Is Blank. |
| $! |
| $ IF (P1.EQS."ALL") |
| $ THEN |
| $! |
| $! P1 Is ALL, So Build Everything. |
| $! |
| $ BUILDCOMMAND = "ALL" |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! Else, Check To See If P1 Has A Valid Argument. |
| $! |
| $ IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") - |
| .OR.(P1.EQS."BUILDALL") - |
| .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") - |
| .OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS") - |
| .OR.(P1.EQS."ENGINES") |
| $ THEN |
| $! |
| $! A Valid Argument. |
| $! |
| $ BUILDCOMMAND = P1 |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! Tell The User We Don't Know What They Want. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "USAGE: @MAKEVMS.COM [Target] [Pointer size] [Debug option] <Compiler>" |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL """" NODEBUG " |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The Target ",P1," Is Invalid. The Valid Target Options Are:" |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT " ALL : Just Build Everything." |
| $ WRITE SYS$OUTPUT " CONFIG : Just build the [.CRYPTO._xxx]OPENSSLCONF.H file." |
| $ WRITE SYS$OUTPUT " BUILDINF : Just build the [.CRYPTO._xxx]BUILDINF.H file." |
| $ WRITE SYS$OUTPUT " SOFTLINKS: Just Fix The Unix soft links." |
| $ WRITE SYS$OUTPUT " BUILDALL : Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done." |
| $ WRITE SYS$OUTPUT " CRYPTO : To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library." |
| $ WRITE SYS$OUTPUT " CRYPTO/x : To Build Just The x Part Of The" |
| $ WRITE SYS$OUTPUT " [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library." |
| $ WRITE SYS$OUTPUT " SSL : To Build Just The [.xxx.EXE.SSL]LIBSSL.OLB Library." |
| $ WRITE SYS$OUTPUT " SSL_TASK : To Build Just The [.xxx.EXE.SSL]SSL_TASK.EXE Program." |
| $ WRITE SYS$OUTPUT " TEST : To Build Just The OpenSSL Test Programs." |
| $ WRITE SYS$OUTPUT " APPS : To Build Just The OpenSSL Application Programs." |
| $ WRITE SYS$OUTPUT " ENGINES : To Build Just The ENGINES" |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT " Where 'xxx' Stands For:" |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT " ALPHA[64]: Alpha Architecture." |
| $ WRITE SYS$OUTPUT " IA64[64] : IA64 Architecture." |
| $ WRITE SYS$OUTPUT " VAX : VAX Architecture." |
| $ WRITE SYS$OUTPUT "" |
| $! |
| $! Time To EXIT. |
| $! |
| $ GOTO TIDY |
| $! |
| $! End The Valid Argument Check. |
| $! |
| $ ENDIF |
| $! |
| $! End The P1 Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check P2 (POINTER_SIZE). |
| $! |
| $ IF (P2 .NES. "") .AND. (ARCH .NES. "VAX") |
| $ THEN |
| $! |
| $ IF (P2 .EQS. "32") |
| $ THEN |
| $ POINTER_SIZE = "32" |
| $ ELSE |
| $ POINTER_SIZE = F$EDIT( P2, "COLLAPSE, UPCASE") |
| $ IF ((POINTER_SIZE .EQS. "64") .OR. - |
| (POINTER_SIZE .EQS. "64=") .OR. - |
| (POINTER_SIZE .EQS. "64=ARGV")) |
| $ THEN |
| $ ARCHD = ARCH+ "_64" |
| $ LIB32 = "" |
| $ ELSE |
| $! |
| $! Tell The User Entered An Invalid Option. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The Option ", P2, - |
| " Is Invalid. The Valid Options Are:" |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT - |
| " """" : Compile with default (short) pointers." |
| $ WRITE SYS$OUTPUT - |
| " 32 : Compile with 32-bit (short) pointers." |
| $ WRITE SYS$OUTPUT - |
| " 64 : Compile with 64-bit (long) pointers (auto ARGV)." |
| $ WRITE SYS$OUTPUT - |
| " 64= : Compile with 64-bit (long) pointers (no ARGV)." |
| $ WRITE SYS$OUTPUT - |
| " 64=ARGV : Compile with 64-bit (long) pointers (ARGV)." |
| $ WRITE SYS$OUTPUT "" |
| $! |
| $! Time To EXIT. |
| $! |
| $ GOTO TIDY |
| $! |
| $ ENDIF |
| $! |
| $ ENDIF |
| $! |
| $! End The P2 (POINTER_SIZE) Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If P3 Is Blank. |
| $! |
| $ IF (P3.EQS."NODEBUG") |
| $ THEN |
| $! |
| $! P3 Is NODEBUG, So Compile Without Debugger Information. |
| $! |
| $ DEBUGGER = "NODEBUG" |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! Check To See If We Are To Compile With Debugger Information. |
| $! |
| $ IF (P3.EQS."DEBUG") |
| $ THEN |
| $! |
| $! Compile With Debugger Information. |
| $! |
| $ DEBUGGER = "DEBUG" |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! Tell The User Entered An Invalid Option. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:" |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information." |
| $ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information." |
| $ WRITE SYS$OUTPUT "" |
| $! |
| $! Time To EXIT. |
| $! |
| $ GOTO TIDY |
| $! |
| $! End The Valid Argument Check. |
| $! |
| $ ENDIF |
| $! |
| $! End The P3 Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If P4 Is Blank. |
| $! |
| $ IF (P4.EQS."") |
| $ THEN |
| $! |
| $! O.K., The User Didn't Specify A Compiler, Let's Try To |
| $! Find Out Which One To Use. |
| $! |
| $! Check To See If We Have GNU C. |
| $! |
| $ IF (F$TRNLNM("GNU_CC").NES."") |
| $ THEN |
| $! |
| $! Looks Like GNUC, Set To Use GNUC. |
| $! |
| $ COMPILER = "GNUC" |
| $! |
| $! Tell The User We Are Using GNUC. |
| $! |
| $ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." |
| $! |
| $! End The GNU C Compiler Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If We Have VAXC Or DECC. |
| $! |
| $ IF (F$GETSYI("CPU").GE.128).OR.(F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC") |
| $ THEN |
| $! |
| $! Looks Like DECC, Set To Use DECC. |
| $! |
| $ COMPILER = "DECC" |
| $! |
| $! Tell The User We Are Using DECC. |
| $! |
| $ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! Looks Like VAXC, Set To Use VAXC. |
| $! |
| $ COMPILER = "VAXC" |
| $! |
| $! Tell The User We Are Using VAX C. |
| $! |
| $ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." |
| $! |
| $! End The DECC & VAXC Compiler Check. |
| $! |
| $ ENDIF |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! Check To See If The User Entered A Valid Parameter. |
| $! |
| $ IF (P4.EQS."VAXC").OR.(P4.EQS."DECC").OR.(P4.EQS."GNUC")!.OR.(P4.EQS."LINK") |
| $ THEN |
| $! |
| $! Check To See If The User Wanted To Just LINK. |
| $! |
| $ IF (P4.EQS."LINK") |
| $ THEN |
| $! |
| $! Looks Like LINK-only |
| $! |
| $ COMPILER = "LINK" |
| $! |
| $! Tell The User We Are Only Linking. |
| $! |
| $ WRITE SYS$OUTPUT "LINK Only. This actually NOT YET SUPPORTED!" |
| $! |
| $! End LINK Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If The User Wanted DECC. |
| $! |
| $ IF (P4.EQS."DECC") |
| $ THEN |
| $! |
| $! Looks Like DECC, Set To Use DECC. |
| $! |
| $ COMPILER = "DECC" |
| $! |
| $! Tell The User We Are Using DECC. |
| $! |
| $ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." |
| $! |
| $! End DECC Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If We Are To Use VAXC. |
| $! |
| $ IF (P4.EQS."VAXC") |
| $ THEN |
| $! |
| $! Looks Like VAXC, Set To Use VAXC. |
| $! |
| $ COMPILER = "VAXC" |
| $! |
| $! Tell The User We Are Using VAX C. |
| $! |
| $ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." |
| $! |
| $! End VAXC Check |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If We Are To Use GNU C. |
| $! |
| $ IF (P4.EQS."GNUC") |
| $ THEN |
| $! |
| $! Looks Like GNUC, Set To Use GNUC. |
| $! |
| $ COMPILER = "GNUC" |
| $! |
| $! Tell The User We Are Using GNUC. |
| $! |
| $ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." |
| $! |
| $! End The GNU C Check. |
| $! |
| $ ENDIF |
| $! |
| $! Else The User Entered An Invalid Argument. |
| $! |
| $ ELSE |
| $! |
| $! Tell The User We Don't Know What They Want. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The Option ",P4," Is Invalid. The Valid Options Are:" |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C." |
| $ WRITE SYS$OUTPUT " DECC : To Compile With DEC C." |
| $ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C." |
| $ WRITE SYS$OUTPUT "" |
| $! |
| $! Time To EXIT. |
| $! |
| $ GOTO TIDY |
| $! |
| $! End The Valid Argument Check. |
| $! |
| $ ENDIF |
| $! |
| $! End The P4 Check. |
| $! |
| $ ENDIF |
| $! |
| $! Time to check the contents of P5, and to make sure we get the correct |
| $! library. |
| $! |
| $ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" - |
| .OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE" |
| $ THEN |
| $! |
| $! Check to see if SOCKETSHR was chosen |
| $! |
| $ IF P5.EQS."SOCKETSHR" |
| $ THEN |
| $! |
| $! Set the library to use SOCKETSHR |
| $! |
| $ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS" |
| $! |
| $! Tell the user |
| $! |
| $ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP" |
| $! |
| $! Done with SOCKETSHR |
| $! |
| $ ENDIF |
| $! |
| $! Check to see if MULTINET was chosen |
| $! |
| $ IF P5.EQS."MULTINET" |
| $ THEN |
| $! |
| $! Set the library to use UCX emulation. |
| $! |
| $ P5 = "UCX" |
| $! |
| $! Tell the user |
| $! |
| $ WRITE SYS$OUTPUT "Using MultiNet via UCX emulation for TCP/IP" |
| $! |
| $! Done with MULTINET |
| $! |
| $ ENDIF |
| $! |
| $! Check to see if UCX was chosen |
| $! |
| $ IF P5.EQS."UCX" |
| $ THEN |
| $! |
| $! Set the library to use UCX. |
| $! |
| $ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS" |
| $! |
| $! Tell the user |
| $! |
| $ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP" |
| $! |
| $! Done with UCX |
| $! |
| $ ENDIF |
| $! |
| $! Check to see if TCPIP was chosen |
| $! |
| $ IF P5.EQS."TCPIP" |
| $ THEN |
| $! |
| $! Set the library to use TCPIP (post UCX). |
| $! |
| $ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS" |
| $! |
| $! Tell the user |
| $! |
| $ WRITE SYS$OUTPUT "Using TCPIP (post UCX) for TCP/IP" |
| $! |
| $! Done with TCPIP |
| $! |
| $ ENDIF |
| $! |
| $! Check to see if NONE was chosen |
| $! |
| $ IF P5.EQS."NONE" |
| $ THEN |
| $! |
| $! Do not use a TCPIP library. |
| $! |
| $ TCPIP_LIB = "" |
| $! |
| $! Tell the user |
| $! |
| $ WRITE SYS$OUTPUT "A specific TCPIP library will not be used." |
| $! |
| $! Done with NONE. |
| $! |
| $ ENDIF |
| $! |
| $! Set the TCPIP_TYPE symbol |
| $! |
| $ TCPIP_TYPE = P5 |
| $! |
| $! Print info |
| $! |
| $ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB |
| $! |
| $! Else The User Entered An Invalid Argument. |
| $! |
| $ ELSE |
| $ IF P5 .NES. "" |
| $ THEN |
| $! |
| $! Tell The User We Don't Know What They Want. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The Option ",P5," Is Invalid. The Valid Options Are:" |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library." |
| $ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library." |
| $ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP TCP/IP (post UCX) library." |
| $ WRITE SYS$OUTPUT " NONE : To not link with a specific TCP/IP library." |
| $ WRITE SYS$OUTPUT "" |
| $! |
| $! Time To EXIT. |
| $! |
| $ GOTO TIDY |
| $ ELSE |
| $! |
| $! If TCPIP is not defined, then hardcode it to make |
| $! it clear that no TCPIP is desired. |
| $! |
| $ IF P5 .EQS. "" |
| $ THEN |
| $ TCPIP_LIB = "" |
| $ TCPIP_TYPE = "NONE" |
| $ ELSE |
| $! |
| $! Set the TCPIP_TYPE symbol |
| $! |
| $ TCPIP_TYPE = P5 |
| $ ENDIF |
| $ ENDIF |
| $! |
| $! Done with TCP/IP libraries |
| $! |
| $ ENDIF |
| $! |
| $! Special Threads For OpenVMS v7.1 Or Later |
| $! |
| $! Written By: Richard Levitte |
| $! richard@levitte.org |
| $! |
| $! |
| $! Check To See If We Have A Option For P6. |
| $! |
| $ IF (P6.EQS."") |
| $ THEN |
| $! |
| $! Get The Version Of VMS We Are Using. |
| $! |
| $ ISSEVEN := |
| $ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,VMS_VERSION)) |
| $ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP)) |
| $! |
| $! Check To See If The VMS Version Is v7.1 Or Later. |
| $! |
| $ IF (TMP.GE.71) |
| $ THEN |
| $! |
| $! We Have OpenVMS v7.1 Or Later, So Use The Special Threads. |
| $! |
| $ ISSEVEN := ,PTHREAD_USE_D4 |
| $! |
| $! End The VMS Version Check. |
| $! |
| $ ENDIF |
| $! |
| $! End The P6 Check. |
| $! |
| $ ENDIF |
| $! |
| $! |
| $! Check To See If We Have A ZLIB Option. |
| $! |
| $ ZLIB = P7 |
| $ IF (ZLIB .NES. "") |
| $ THEN |
| $! |
| $! Check for expected ZLIB files. |
| $! |
| $ err = 0 |
| $ file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY") |
| $ if (f$search( file1) .eqs. "") |
| $ then |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid." |
| $ WRITE SYS$OUTPUT " Can't find header: ''file1'" |
| $ err = 1 |
| $ endif |
| $! |
| $ file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY") |
| $ if (f$search( file2) .eqs. "") |
| $ then |
| $ if (err .eq. 0) |
| $ then |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid." |
| $ endif |
| $ WRITE SYS$OUTPUT " Can't find library: ''file2'" |
| $ WRITE SYS$OUTPUT "" |
| $ err = err+ 2 |
| $ endif |
| $ if (err .eq. 1) |
| $ then |
| $ WRITE SYS$OUTPUT "" |
| $ endif |
| $! |
| $ if (err .ne. 0) |
| $ then |
| $ GOTO TIDY |
| $ endif |
| $! |
| $! Print info |
| $! |
| $ WRITE SYS$OUTPUT "ZLIB library spec: ", file2 |
| $! |
| $! End The ZLIB Check. |
| $! |
| $ ENDIF |
| $! |
| $! Time To RETURN... |
| $! |
| $ RETURN |
| $! |
| $ TIDY: |
| $! |
| $! Close any open files. |
| $! |
| $ if (f$trnlnm( "h_file", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then - |
| close h_file |
| $! |
| $! Restore the original default device:[directory]. |
| $! |
| $ SET DEFAULT 'DEF_ORIG' |
| $! |
| $ EXIT |
| $! |
