doc/man1/openssl-pkcs8.pod.in - third_party/openssl - Git at Google

 =pod
 {- OpenSSL::safe::output_do_not_edit_headers(); -}

 =head1 NAME

 openssl-pkcs8 - PKCS#8 format private key conversion command

 =head1 SYNOPSIS

 B<openssl> B<pkcs8>
 [B<-help>]
 [B<-topk8>]
 [B<-inform> B<DER>|B<PEM>]
 [B<-outform> B<DER>|B<PEM>]
 [B<-in> I<filename>]
 [B<-passin> I<arg>]
 [B<-out> I<filename>]
 [B<-passout> I<arg>]
 [B<-iter> I<count>]
 [B<-noiter>]
 [B<-nocrypt>]
 [B<-traditional>]
 [B<-v2> I<alg>]
 [B<-v2prf> I<alg>]
 [B<-v1> I<alg>]
 [B<-scrypt>]
 [B<-scrypt_N> I<N>]
 [B<-scrypt_r> I<r>]
 [B<-scrypt_p> I<p>]
 {- $OpenSSL::safe::opt_r_synopsis -}
 {- $OpenSSL::safe::opt_engine_synopsis -}{- $OpenSSL::safe::opt_provider_synopsis -}

 =head1 DESCRIPTION

 This command processes private keys in PKCS#8 format. It can handle
 both unencrypted PKCS#8 PrivateKeyInfo format and EncryptedPrivateKeyInfo
 format with a variety of PKCS#5 (v1.5 and v2.0) and PKCS#12 algorithms.

 =head1 OPTIONS

 =over 4

 =item B<-help>

 Print out a usage message.

 =item B<-topk8>

 Normally a PKCS#8 private key is expected on input and a private key will be
 written to the output file. With the B<-topk8> option the situation is
 reversed: it reads a private key and writes a PKCS#8 format key.

 =item B<-inform> B<DER>|B<PEM>, B<-outform> B<DER>|B<PEM>

 The input and formats; the default is B<PEM>.
 See L<openssl-format-options(1)> for details.

 If a key is being converted from PKCS#8 form (i.e. the B<-topk8> option is
 not used) then the input file must be in PKCS#8 format. An encrypted
 key is expected unless B<-nocrypt> is included.

 If B<-topk8> is not used and B<PEM> mode is set the output file will be an
 unencrypted private key in PKCS#8 format. If the B<-traditional> option is
 used then a traditional format private key is written instead.

 If B<-topk8> is not used and B<DER> mode is set the output file will be an
 unencrypted private key in traditional DER format.

 If B<-topk8> is used then any supported private key can be used for the input
 file in a format specified by B<-inform>. The output file will be encrypted
 PKCS#8 format using the specified encryption parameters unless B<-nocrypt>
 is included.

 =item B<-traditional>

 When this option is present and B<-topk8> is not a traditional format private
 key is written.

 =item B<-in> I<filename>

 This specifies the input filename to read a key from or standard input if this
 option is not specified. If the key is encrypted a pass phrase will be
 prompted for.

 =item B<-passin> I<arg>, B<-passout> I<arg>

 The password source for the input and output file.
 For more information about the format of B<arg>
 see L<openssl-passphrase-options(1)>.

 =item B<-out> I<filename>

 This specifies the output filename to write a key to or standard output by
 default. If any encryption options are set then a pass phrase will be
 prompted for. The output filename should B<not> be the same as the input
 filename.

 =item B<-iter> I<count>

 When creating new PKCS#8 containers, use a given number of iterations on
 the password in deriving the encryption key for the PKCS#8 output.
 High values increase the time required to brute-force a PKCS#8 container.

 =item B<-noiter>

 When creating new PKCS#8 containers, use 1 as iteration count.

 =item B<-nocrypt>

 PKCS#8 keys generated or input are normally PKCS#8 EncryptedPrivateKeyInfo
 structures using an appropriate password based encryption algorithm. With
 this option an unencrypted PrivateKeyInfo structure is expected or output.
 This option does not encrypt private keys at all and should only be used
 when absolutely necessary. Certain software such as some versions of Java
 code signing software used unencrypted private keys.

 =item B<-v2> I<alg>

 This option sets the PKCS#5 v2.0 algorithm.

 The I<alg> argument is the encryption algorithm to use, valid values include
 B<aes128>, B<aes256> and B<des3>. If this option isn't specified then B<aes256>
 is used.

 =item B<-v2prf> I<alg>

 This option sets the PRF algorithm to use with PKCS#5 v2.0. A typical value
 value would be B<hmacWithSHA256>. If this option isn't set then the default
 for the cipher is used or B<hmacWithSHA256> if there is no default.

 Some implementations may not support custom PRF algorithms and may require
 the B<hmacWithSHA1> option to work.

 =item B<-v1> I<alg>

 This option indicates a PKCS#5 v1.5 or PKCS#12 algorithm should be used.  Some
 older implementations may not support PKCS#5 v2.0 and may require this option.
 If not specified PKCS#5 v2.0 form is used.

 =item B<-scrypt>

 Uses the B<scrypt> algorithm for private key encryption using default
 parameters: currently N=16384, r=8 and p=1 and AES in CBC mode with a 256 bit
 key. These parameters can be modified using the B<-scrypt_N>, B<-scrypt_r>,
 B<-scrypt_p> and B<-v2> options.

 =item B<-scrypt_N> I<N>, B<-scrypt_r> I<r>, B<-scrypt_p> I<p>

 Sets the scrypt I<N>, I<r> or I<p> parameters.

 {- $OpenSSL::safe::opt_r_item -}

 {- $OpenSSL::safe::opt_engine_item -}

 {- $OpenSSL::safe::opt_provider_item -}

 =back

 =head1 NOTES

 By default, when converting a key to PKCS#8 format, PKCS#5 v2.0 using 256 bit
 AES with HMAC and SHA256 is used.

 Some older implementations do not support PKCS#5 v2.0 format and require
 the older PKCS#5 v1.5 form instead, possibly also requiring insecure weak
 encryption algorithms such as 56 bit DES.

 Private keys encrypted using PKCS#5 v2.0 algorithms and high iteration
 counts are more secure that those encrypted using the traditional
 SSLeay compatible formats. So if additional security is considered
 important the keys should be converted.

 It is possible to write out DER encoded encrypted private keys in
 PKCS#8 format because the encryption details are included at an ASN1
 level whereas the traditional format includes them at a PEM level.

 =head1 PKCS#5 V1.5 AND PKCS#12 ALGORITHMS

 Various algorithms can be used with the B<-v1> command line option,
 including PKCS#5 v1.5 and PKCS#12. These are described in more detail
 below.

 =over 4

 =item B<PBE-MD2-DES PBE-MD5-DES>

 These algorithms were included in the original PKCS#5 v1.5 specification.
 They only offer 56 bits of protection since they both use DES.

 =item B<PBE-SHA1-RC2-64>, B<PBE-MD2-RC2-64>, B<PBE-MD5-RC2-64>, B<PBE-SHA1-DES>

 These algorithms are not mentioned in the original PKCS#5 v1.5 specification
 but they use the same key derivation algorithm and are supported by some
 software. They are mentioned in PKCS#5 v2.0. They use either 64 bit RC2 or
 56 bit DES.

 =item B<PBE-SHA1-RC4-128>, B<PBE-SHA1-RC4-40>, B<PBE-SHA1-3DES>, B<PBE-SHA1-2DES>, B<PBE-SHA1-RC2-128>, B<PBE-SHA1-RC2-40>

 These algorithms use the PKCS#12 password based encryption algorithm and
 allow strong encryption algorithms like triple DES or 128 bit RC2 to be used.

 =back

 =head1 EXAMPLES

 Convert a private key to PKCS#8 format using default parameters (AES with
 256 bit key and B<hmacWithSHA256>):

  openssl pkcs8 -in key.pem -topk8 -out enckey.pem

 Convert a private key to PKCS#8 unencrypted format:

  openssl pkcs8 -in key.pem -topk8 -nocrypt -out enckey.pem

 Convert a private key to PKCS#5 v2.0 format using triple DES:

  openssl pkcs8 -in key.pem -topk8 -v2 des3 -out enckey.pem

 Convert a private key to PKCS#5 v2.0 format using AES with 256 bits in CBC
 mode and B<hmacWithSHA512> PRF:

  openssl pkcs8 -in key.pem -topk8 -v2 aes-256-cbc -v2prf hmacWithSHA512 -out enckey.pem

 Convert a private key to PKCS#8 using a PKCS#5 1.5 compatible algorithm
 (DES):

  openssl pkcs8 -in key.pem -topk8 -v1 PBE-MD5-DES -out enckey.pem

 Convert a private key to PKCS#8 using a PKCS#12 compatible algorithm
 (3DES):

  openssl pkcs8 -in key.pem -topk8 -out enckey.pem -v1 PBE-SHA1-3DES

 Read a DER unencrypted PKCS#8 format private key:

  openssl pkcs8 -inform DER -nocrypt -in key.der -out key.pem

 Convert a private key from any PKCS#8 encrypted format to traditional format:

  openssl pkcs8 -in pk8.pem -traditional -out key.pem

 Convert a private key to PKCS#8 format, encrypting with AES-256 and with
 one million iterations of the password:

  openssl pkcs8 -in key.pem -topk8 -v2 aes-256-cbc -iter 1000000 -out pk8.pem

 =head1 STANDARDS

 Test vectors from this PKCS#5 v2.0 implementation were posted to the
 pkcs-tng mailing list using triple DES, DES and RC2 with high iteration
 counts, several people confirmed that they could decrypt the private
 keys produced and therefore, it can be assumed that the PKCS#5 v2.0
 implementation is reasonably accurate at least as far as these
 algorithms are concerned.

 The format of PKCS#8 DSA (and other) private keys is not well documented:
 it is hidden away in PKCS#11 v2.01, section 11.9. OpenSSL's default DSA
 PKCS#8 private key format complies with this standard.

 =head1 BUGS

 There should be an option that prints out the encryption algorithm
 in use and other details such as the iteration count.

 =head1 SEE ALSO

 L<openssl(1)>,
 L<openssl-dsa(1)>,
 L<openssl-rsa(1)>,
 L<openssl-genrsa(1)>,
 L<openssl-gendsa(1)>

 =head1 HISTORY

 The B<-iter> option was added in OpenSSL 1.1.0.

 The B<-engine> option was deprecated in OpenSSL 3.0.

 =head1 COPYRIGHT

 Copyright 2000-2021 The OpenSSL Project Authors. All Rights Reserved.

 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
 in the file LICENSE in the source distribution or at
 L<https://www.openssl.org/source/license.html>.

 =cut
	=pod
	{- OpenSSL::safe::output_do_not_edit_headers(); -}

	=head1 NAME

	openssl-pkcs8 - PKCS#8 format private key conversion command

	=head1 SYNOPSIS

	B<openssl> B<pkcs8>
	[B<-help>]
	[B<-topk8>]
	[B<-inform> B<DER>\|B<PEM>]
	[B<-outform> B<DER>\|B<PEM>]
	[B<-in> I<filename>]
	[B<-passin> I<arg>]
	[B<-out> I<filename>]
	[B<-passout> I<arg>]
	[B<-iter> I<count>]
	[B<-noiter>]
	[B<-nocrypt>]
	[B<-traditional>]
	[B<-v2> I<alg>]
	[B<-v2prf> I<alg>]
	[B<-v1> I<alg>]
	[B<-scrypt>]
	[B<-scrypt_N> I<N>]
	[B<-scrypt_r> I<r>]
	[B<-scrypt_p> I<p>]
	{- $OpenSSL::safe::opt_r_synopsis -}
	{- $OpenSSL::safe::opt_engine_synopsis -}{- $OpenSSL::safe::opt_provider_synopsis -}

	=head1 DESCRIPTION

	This command processes private keys in PKCS#8 format. It can handle
	both unencrypted PKCS#8 PrivateKeyInfo format and EncryptedPrivateKeyInfo
	format with a variety of PKCS#5 (v1.5 and v2.0) and PKCS#12 algorithms.

	=head1 OPTIONS

	=over 4

	=item B<-help>

	Print out a usage message.

	=item B<-topk8>

	Normally a PKCS#8 private key is expected on input and a private key will be
	written to the output file. With the B<-topk8> option the situation is
	reversed: it reads a private key and writes a PKCS#8 format key.

	=item B<-inform> B<DER>\|B<PEM>, B<-outform> B<DER>\|B<PEM>

	The input and formats; the default is B<PEM>.
	See L<openssl-format-options(1)> for details.

	If a key is being converted from PKCS#8 form (i.e. the B<-topk8> option is
	not used) then the input file must be in PKCS#8 format. An encrypted
	key is expected unless B<-nocrypt> is included.

	If B<-topk8> is not used and B<PEM> mode is set the output file will be an
	unencrypted private key in PKCS#8 format. If the B<-traditional> option is
	used then a traditional format private key is written instead.

	If B<-topk8> is not used and B<DER> mode is set the output file will be an
	unencrypted private key in traditional DER format.

	If B<-topk8> is used then any supported private key can be used for the input
	file in a format specified by B<-inform>. The output file will be encrypted
	PKCS#8 format using the specified encryption parameters unless B<-nocrypt>
	is included.

	=item B<-traditional>

	When this option is present and B<-topk8> is not a traditional format private
	key is written.

	=item B<-in> I<filename>

	This specifies the input filename to read a key from or standard input if this
	option is not specified. If the key is encrypted a pass phrase will be
	prompted for.

	=item B<-passin> I<arg>, B<-passout> I<arg>

	The password source for the input and output file.
	For more information about the format of B<arg>
	see L<openssl-passphrase-options(1)>.

	=item B<-out> I<filename>

	This specifies the output filename to write a key to or standard output by
	default. If any encryption options are set then a pass phrase will be
	prompted for. The output filename should B<not> be the same as the input
	filename.

	=item B<-iter> I<count>

	When creating new PKCS#8 containers, use a given number of iterations on
	the password in deriving the encryption key for the PKCS#8 output.
	High values increase the time required to brute-force a PKCS#8 container.

	=item B<-noiter>

	When creating new PKCS#8 containers, use 1 as iteration count.

	=item B<-nocrypt>

	PKCS#8 keys generated or input are normally PKCS#8 EncryptedPrivateKeyInfo
	structures using an appropriate password based encryption algorithm. With
	this option an unencrypted PrivateKeyInfo structure is expected or output.
	This option does not encrypt private keys at all and should only be used
	when absolutely necessary. Certain software such as some versions of Java
	code signing software used unencrypted private keys.

	=item B<-v2> I<alg>

	This option sets the PKCS#5 v2.0 algorithm.

	The I<alg> argument is the encryption algorithm to use, valid values include
	B<aes128>, B<aes256> and B<des3>. If this option isn't specified then B<aes256>
	is used.

	=item B<-v2prf> I<alg>

	This option sets the PRF algorithm to use with PKCS#5 v2.0. A typical value
	value would be B<hmacWithSHA256>. If this option isn't set then the default
	for the cipher is used or B<hmacWithSHA256> if there is no default.

	Some implementations may not support custom PRF algorithms and may require
	the B<hmacWithSHA1> option to work.

	=item B<-v1> I<alg>

	This option indicates a PKCS#5 v1.5 or PKCS#12 algorithm should be used. Some
	older implementations may not support PKCS#5 v2.0 and may require this option.
	If not specified PKCS#5 v2.0 form is used.

	=item B<-scrypt>

	Uses the B<scrypt> algorithm for private key encryption using default
	parameters: currently N=16384, r=8 and p=1 and AES in CBC mode with a 256 bit
	key. These parameters can be modified using the B<-scrypt_N>, B<-scrypt_r>,
	B<-scrypt_p> and B<-v2> options.

	=item B<-scrypt_N> I<N>, B<-scrypt_r> I<r>, B<-scrypt_p> I<p>

	Sets the scrypt I<N>, I<r> or I<p> parameters.

	{- $OpenSSL::safe::opt_r_item -}

	{- $OpenSSL::safe::opt_engine_item -}

	{- $OpenSSL::safe::opt_provider_item -}

	=back

	=head1 NOTES

	By default, when converting a key to PKCS#8 format, PKCS#5 v2.0 using 256 bit
	AES with HMAC and SHA256 is used.

	Some older implementations do not support PKCS#5 v2.0 format and require
	the older PKCS#5 v1.5 form instead, possibly also requiring insecure weak
	encryption algorithms such as 56 bit DES.

	Private keys encrypted using PKCS#5 v2.0 algorithms and high iteration
	counts are more secure that those encrypted using the traditional
	SSLeay compatible formats. So if additional security is considered
	important the keys should be converted.

	It is possible to write out DER encoded encrypted private keys in
	PKCS#8 format because the encryption details are included at an ASN1
	level whereas the traditional format includes them at a PEM level.

	=head1 PKCS#5 V1.5 AND PKCS#12 ALGORITHMS

	Various algorithms can be used with the B<-v1> command line option,
	including PKCS#5 v1.5 and PKCS#12. These are described in more detail
	below.

	=over 4

	=item B<PBE-MD2-DES PBE-MD5-DES>

	These algorithms were included in the original PKCS#5 v1.5 specification.
	They only offer 56 bits of protection since they both use DES.

	=item B<PBE-SHA1-RC2-64>, B<PBE-MD2-RC2-64>, B<PBE-MD5-RC2-64>, B<PBE-SHA1-DES>

	These algorithms are not mentioned in the original PKCS#5 v1.5 specification
	but they use the same key derivation algorithm and are supported by some
	software. They are mentioned in PKCS#5 v2.0. They use either 64 bit RC2 or
	56 bit DES.

	=item B<PBE-SHA1-RC4-128>, B<PBE-SHA1-RC4-40>, B<PBE-SHA1-3DES>, B<PBE-SHA1-2DES>, B<PBE-SHA1-RC2-128>, B<PBE-SHA1-RC2-40>

	These algorithms use the PKCS#12 password based encryption algorithm and
	allow strong encryption algorithms like triple DES or 128 bit RC2 to be used.

	=back

	=head1 EXAMPLES

	Convert a private key to PKCS#8 format using default parameters (AES with
	256 bit key and B<hmacWithSHA256>):

	openssl pkcs8 -in key.pem -topk8 -out enckey.pem

	Convert a private key to PKCS#8 unencrypted format:

	openssl pkcs8 -in key.pem -topk8 -nocrypt -out enckey.pem

	Convert a private key to PKCS#5 v2.0 format using triple DES:

	openssl pkcs8 -in key.pem -topk8 -v2 des3 -out enckey.pem

	Convert a private key to PKCS#5 v2.0 format using AES with 256 bits in CBC
	mode and B<hmacWithSHA512> PRF:

	openssl pkcs8 -in key.pem -topk8 -v2 aes-256-cbc -v2prf hmacWithSHA512 -out enckey.pem

	Convert a private key to PKCS#8 using a PKCS#5 1.5 compatible algorithm
	(DES):

	openssl pkcs8 -in key.pem -topk8 -v1 PBE-MD5-DES -out enckey.pem

	Convert a private key to PKCS#8 using a PKCS#12 compatible algorithm
	(3DES):

	openssl pkcs8 -in key.pem -topk8 -out enckey.pem -v1 PBE-SHA1-3DES

	Read a DER unencrypted PKCS#8 format private key:

	openssl pkcs8 -inform DER -nocrypt -in key.der -out key.pem

	Convert a private key from any PKCS#8 encrypted format to traditional format:

	openssl pkcs8 -in pk8.pem -traditional -out key.pem

	Convert a private key to PKCS#8 format, encrypting with AES-256 and with
	one million iterations of the password:

	openssl pkcs8 -in key.pem -topk8 -v2 aes-256-cbc -iter 1000000 -out pk8.pem

	=head1 STANDARDS

	Test vectors from this PKCS#5 v2.0 implementation were posted to the
	pkcs-tng mailing list using triple DES, DES and RC2 with high iteration
	counts, several people confirmed that they could decrypt the private
	keys produced and therefore, it can be assumed that the PKCS#5 v2.0
	implementation is reasonably accurate at least as far as these
	algorithms are concerned.

	The format of PKCS#8 DSA (and other) private keys is not well documented:
	it is hidden away in PKCS#11 v2.01, section 11.9. OpenSSL's default DSA
	PKCS#8 private key format complies with this standard.

	=head1 BUGS

	There should be an option that prints out the encryption algorithm
	in use and other details such as the iteration count.

	=head1 SEE ALSO

	L<openssl(1)>,
	L<openssl-dsa(1)>,
	L<openssl-rsa(1)>,
	L<openssl-genrsa(1)>,
	L<openssl-gendsa(1)>

	=head1 HISTORY

	The B<-iter> option was added in OpenSSL 1.1.0.

	The B<-engine> option was deprecated in OpenSSL 3.0.

	=head1 COPYRIGHT

	Copyright 2000-2021 The OpenSSL Project Authors. All Rights Reserved.

	Licensed under the Apache License 2.0 (the "License"). You may not use
	this file except in compliance with the License. You can obtain a copy
	in the file LICENSE in the source distribution or at
	L<https://www.openssl.org/source/license.html>.

	=cut