|  | /* ssl/ssl_locl.h */ | 
|  | /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) | 
|  | * All rights reserved. | 
|  | * | 
|  | * This package is an SSL implementation written | 
|  | * by Eric Young (eay@cryptsoft.com). | 
|  | * The implementation was written so as to conform with Netscapes SSL. | 
|  | * | 
|  | * This library is free for commercial and non-commercial use as long as | 
|  | * the following conditions are aheared to.  The following conditions | 
|  | * apply to all code found in this distribution, be it the RC4, RSA, | 
|  | * lhash, DES, etc., code; not just the SSL code.  The SSL documentation | 
|  | * included with this distribution is covered by the same copyright terms | 
|  | * except that the holder is Tim Hudson (tjh@cryptsoft.com). | 
|  | * | 
|  | * Copyright remains Eric Young's, and as such any Copyright notices in | 
|  | * the code are not to be removed. | 
|  | * If this package is used in a product, Eric Young should be given attribution | 
|  | * as the author of the parts of the library used. | 
|  | * This can be in the form of a textual message at program startup or | 
|  | * in documentation (online or textual) provided with the package. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | * 2. Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in the | 
|  | *    documentation and/or other materials provided with the distribution. | 
|  | * 3. All advertising materials mentioning features or use of this software | 
|  | *    must display the following acknowledgement: | 
|  | *    "This product includes cryptographic software written by | 
|  | *     Eric Young (eay@cryptsoft.com)" | 
|  | *    The word 'cryptographic' can be left out if the rouines from the library | 
|  | *    being used are not cryptographic related :-). | 
|  | * 4. If you include any Windows specific code (or a derivative thereof) from | 
|  | *    the apps directory (application code) you must include an acknowledgement: | 
|  | *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND | 
|  | * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | 
|  | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | 
|  | * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE | 
|  | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
|  | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
|  | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | 
|  | * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | 
|  | * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | 
|  | * SUCH DAMAGE. | 
|  | * | 
|  | * The licence and distribution terms for any publically available version or | 
|  | * derivative of this code cannot be changed.  i.e. this code cannot simply be | 
|  | * copied and put under another distribution licence | 
|  | * [including the GNU Public Licence.] | 
|  | */ | 
|  | /* ==================================================================== | 
|  | * Copyright (c) 1998-2007 The OpenSSL Project.  All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | * | 
|  | * 2. Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in | 
|  | *    the documentation and/or other materials provided with the | 
|  | *    distribution. | 
|  | * | 
|  | * 3. All advertising materials mentioning features or use of this | 
|  | *    software must display the following acknowledgment: | 
|  | *    "This product includes software developed by the OpenSSL Project | 
|  | *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)" | 
|  | * | 
|  | * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to | 
|  | *    endorse or promote products derived from this software without | 
|  | *    prior written permission. For written permission, please contact | 
|  | *    openssl-core@openssl.org. | 
|  | * | 
|  | * 5. Products derived from this software may not be called "OpenSSL" | 
|  | *    nor may "OpenSSL" appear in their names without prior written | 
|  | *    permission of the OpenSSL Project. | 
|  | * | 
|  | * 6. Redistributions of any form whatsoever must retain the following | 
|  | *    acknowledgment: | 
|  | *    "This product includes software developed by the OpenSSL Project | 
|  | *    for use in the OpenSSL Toolkit (http://www.openssl.org/)" | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY | 
|  | * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | 
|  | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR | 
|  | * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR | 
|  | * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | 
|  | * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | 
|  | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | 
|  | * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
|  | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
|  | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | 
|  | * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED | 
|  | * OF THE POSSIBILITY OF SUCH DAMAGE. | 
|  | * ==================================================================== | 
|  | * | 
|  | * This product includes cryptographic software written by Eric Young | 
|  | * (eay@cryptsoft.com).  This product includes software written by Tim | 
|  | * Hudson (tjh@cryptsoft.com). | 
|  | * | 
|  | */ | 
|  | /* ==================================================================== | 
|  | * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. | 
|  | * ECC cipher suite support in OpenSSL originally developed by | 
|  | * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. | 
|  | */ | 
|  | /* ==================================================================== | 
|  | * Copyright 2005 Nokia. All rights reserved. | 
|  | * | 
|  | * The portions of the attached software ("Contribution") is developed by | 
|  | * Nokia Corporation and is licensed pursuant to the OpenSSL open source | 
|  | * license. | 
|  | * | 
|  | * The Contribution, originally written by Mika Kousa and Pasi Eronen of | 
|  | * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites | 
|  | * support (see RFC 4279) to OpenSSL. | 
|  | * | 
|  | * No patent licenses or other rights except those expressly stated in | 
|  | * the OpenSSL open source license shall be deemed granted or received | 
|  | * expressly, by implication, estoppel, or otherwise. | 
|  | * | 
|  | * No assurances are provided by Nokia that the Contribution does not | 
|  | * infringe the patent or other intellectual property rights of any third | 
|  | * party or that the license provides you with all the necessary rights | 
|  | * to make use of the Contribution. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN | 
|  | * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA | 
|  | * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY | 
|  | * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR | 
|  | * OTHERWISE. | 
|  | */ | 
|  |  | 
|  | #ifndef HEADER_SSL_LOCL_H | 
|  | # define HEADER_SSL_LOCL_H | 
|  | # include <stdlib.h> | 
|  | # include <time.h> | 
|  | # include <string.h> | 
|  | # include <errno.h> | 
|  |  | 
|  | # include "e_os.h" | 
|  |  | 
|  | # include <openssl/buffer.h> | 
|  | # ifndef OPENSSL_NO_COMP | 
|  | #  include <openssl/comp.h> | 
|  | # endif | 
|  | # include <openssl/bio.h> | 
|  | # include <openssl/stack.h> | 
|  | # ifndef OPENSSL_NO_RSA | 
|  | #  include <openssl/rsa.h> | 
|  | # endif | 
|  | # ifndef OPENSSL_NO_DSA | 
|  | #  include <openssl/dsa.h> | 
|  | # endif | 
|  | # include <openssl/err.h> | 
|  | # include <openssl/ssl.h> | 
|  | # include <openssl/symhacks.h> | 
|  |  | 
|  | #include "record/record.h" | 
|  | #include "statem/statem.h" | 
|  | #include "packet_locl.h" | 
|  |  | 
|  | # ifdef OPENSSL_BUILD_SHLIBSSL | 
|  | #  undef OPENSSL_EXTERN | 
|  | #  define OPENSSL_EXTERN OPENSSL_EXPORT | 
|  | # endif | 
|  |  | 
|  | # undef PKCS1_CHECK | 
|  |  | 
|  | # define c2l(c,l)        (l = ((unsigned long)(*((c)++)))     , \ | 
|  | l|=(((unsigned long)(*((c)++)))<< 8), \ | 
|  | l|=(((unsigned long)(*((c)++)))<<16), \ | 
|  | l|=(((unsigned long)(*((c)++)))<<24)) | 
|  |  | 
|  | /* NOTE - c is not incremented as per c2l */ | 
|  | # define c2ln(c,l1,l2,n) { \ | 
|  | c+=n; \ | 
|  | l1=l2=0; \ | 
|  | switch (n) { \ | 
|  | case 8: l2 =((unsigned long)(*(--(c))))<<24; \ | 
|  | case 7: l2|=((unsigned long)(*(--(c))))<<16; \ | 
|  | case 6: l2|=((unsigned long)(*(--(c))))<< 8; \ | 
|  | case 5: l2|=((unsigned long)(*(--(c))));     \ | 
|  | case 4: l1 =((unsigned long)(*(--(c))))<<24; \ | 
|  | case 3: l1|=((unsigned long)(*(--(c))))<<16; \ | 
|  | case 2: l1|=((unsigned long)(*(--(c))))<< 8; \ | 
|  | case 1: l1|=((unsigned long)(*(--(c))));     \ | 
|  | } \ | 
|  | } | 
|  |  | 
|  | # define l2c(l,c)        (*((c)++)=(unsigned char)(((l)    )&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>> 8)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>>16)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>>24)&0xff)) | 
|  |  | 
|  | # define n2l(c,l)        (l =((unsigned long)(*((c)++)))<<24, \ | 
|  | l|=((unsigned long)(*((c)++)))<<16, \ | 
|  | l|=((unsigned long)(*((c)++)))<< 8, \ | 
|  | l|=((unsigned long)(*((c)++)))) | 
|  |  | 
|  | # define l2n(l,c)        (*((c)++)=(unsigned char)(((l)>>24)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>>16)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>> 8)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)    )&0xff)) | 
|  |  | 
|  | # define l2n6(l,c)       (*((c)++)=(unsigned char)(((l)>>40)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>>32)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>>24)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>>16)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>> 8)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)    )&0xff)) | 
|  |  | 
|  | # define l2n8(l,c)       (*((c)++)=(unsigned char)(((l)>>56)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>>48)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>>40)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>>32)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>>24)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>>16)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)>> 8)&0xff), \ | 
|  | *((c)++)=(unsigned char)(((l)    )&0xff)) | 
|  |  | 
|  | # define n2l6(c,l)       (l =((BN_ULLONG)(*((c)++)))<<40, \ | 
|  | l|=((BN_ULLONG)(*((c)++)))<<32, \ | 
|  | l|=((BN_ULLONG)(*((c)++)))<<24, \ | 
|  | l|=((BN_ULLONG)(*((c)++)))<<16, \ | 
|  | l|=((BN_ULLONG)(*((c)++)))<< 8, \ | 
|  | l|=((BN_ULLONG)(*((c)++)))) | 
|  |  | 
|  | /* NOTE - c is not incremented as per l2c */ | 
|  | # define l2cn(l1,l2,c,n) { \ | 
|  | c+=n; \ | 
|  | switch (n) { \ | 
|  | case 8: *(--(c))=(unsigned char)(((l2)>>24)&0xff); \ | 
|  | case 7: *(--(c))=(unsigned char)(((l2)>>16)&0xff); \ | 
|  | case 6: *(--(c))=(unsigned char)(((l2)>> 8)&0xff); \ | 
|  | case 5: *(--(c))=(unsigned char)(((l2)    )&0xff); \ | 
|  | case 4: *(--(c))=(unsigned char)(((l1)>>24)&0xff); \ | 
|  | case 3: *(--(c))=(unsigned char)(((l1)>>16)&0xff); \ | 
|  | case 2: *(--(c))=(unsigned char)(((l1)>> 8)&0xff); \ | 
|  | case 1: *(--(c))=(unsigned char)(((l1)    )&0xff); \ | 
|  | } \ | 
|  | } | 
|  |  | 
|  | # define n2s(c,s)        ((s=(((unsigned int)(c[0]))<< 8)| \ | 
|  | (((unsigned int)(c[1]))    )),c+=2) | 
|  | # define s2n(s,c)        ((c[0]=(unsigned char)(((s)>> 8)&0xff), \ | 
|  | c[1]=(unsigned char)(((s)    )&0xff)),c+=2) | 
|  |  | 
|  | # define n2l3(c,l)       ((l =(((unsigned long)(c[0]))<<16)| \ | 
|  | (((unsigned long)(c[1]))<< 8)| \ | 
|  | (((unsigned long)(c[2]))    )),c+=3) | 
|  |  | 
|  | # define l2n3(l,c)       ((c[0]=(unsigned char)(((l)>>16)&0xff), \ | 
|  | c[1]=(unsigned char)(((l)>> 8)&0xff), \ | 
|  | c[2]=(unsigned char)(((l)    )&0xff)),c+=3) | 
|  |  | 
|  | /* LOCAL STUFF */ | 
|  |  | 
|  | # define SSL_DECRYPT     0 | 
|  | # define SSL_ENCRYPT     1 | 
|  |  | 
|  | # define TWO_BYTE_BIT    0x80 | 
|  | # define SEC_ESC_BIT     0x40 | 
|  | # define TWO_BYTE_MASK   0x7fff | 
|  | # define THREE_BYTE_MASK 0x3fff | 
|  |  | 
|  | # define INC32(a)        ((a)=((a)+1)&0xffffffffL) | 
|  | # define DEC32(a)        ((a)=((a)-1)&0xffffffffL) | 
|  | # define MAX_MAC_SIZE    20     /* up from 16 for SSLv3 */ | 
|  |  | 
|  | /* | 
|  | * Define the Bitmasks for SSL_CIPHER.algorithms. | 
|  | * This bits are used packed as dense as possible. If new methods/ciphers | 
|  | * etc will be added, the bits a likely to change, so this information | 
|  | * is for internal library use only, even though SSL_CIPHER.algorithms | 
|  | * can be publicly accessed. | 
|  | * Use the according functions for cipher management instead. | 
|  | * | 
|  | * The bit mask handling in the selection and sorting scheme in | 
|  | * ssl_create_cipher_list() has only limited capabilities, reflecting | 
|  | * that the different entities within are mutually exclusive: | 
|  | * ONLY ONE BIT PER MASK CAN BE SET AT A TIME. | 
|  | */ | 
|  |  | 
|  | /* Bits for algorithm_mkey (key exchange algorithm) */ | 
|  | /* RSA key exchange */ | 
|  | # define SSL_kRSA                0x00000001L | 
|  | /* DH cert, RSA CA cert */ | 
|  | # define SSL_kDHr                0x00000002L | 
|  | /* DH cert, DSA CA cert */ | 
|  | # define SSL_kDHd                0x00000004L | 
|  | /* tmp DH key no DH cert */ | 
|  | # define SSL_kDHE                0x00000008L | 
|  | /* synonym */ | 
|  | # define SSL_kEDH                SSL_kDHE | 
|  | /* ECDH cert, RSA CA cert */ | 
|  | # define SSL_kECDHr              0x00000020L | 
|  | /* ECDH cert, ECDSA CA cert */ | 
|  | # define SSL_kECDHe              0x00000040L | 
|  | /* ephemeral ECDH */ | 
|  | # define SSL_kECDHE              0x00000080L | 
|  | /* synonym */ | 
|  | # define SSL_kEECDH              SSL_kECDHE | 
|  | /* PSK */ | 
|  | # define SSL_kPSK                0x00000100L | 
|  | /* GOST key exchange */ | 
|  | # define SSL_kGOST       0x00000200L | 
|  | /* SRP */ | 
|  | # define SSL_kSRP        0x00000400L | 
|  |  | 
|  | # define SSL_kRSAPSK             0x00000800L | 
|  | # define SSL_kECDHEPSK           0x00001000L | 
|  | # define SSL_kDHEPSK             0x00002000L | 
|  |  | 
|  | /* all PSK */ | 
|  |  | 
|  | #define SSL_PSK     (SSL_kPSK | SSL_kRSAPSK | SSL_kECDHEPSK | SSL_kDHEPSK) | 
|  |  | 
|  | /* Bits for algorithm_auth (server authentication) */ | 
|  | /* RSA auth */ | 
|  | # define SSL_aRSA                0x00000001L | 
|  | /* DSS auth */ | 
|  | # define SSL_aDSS                0x00000002L | 
|  | /* no auth (i.e. use ADH or AECDH) */ | 
|  | # define SSL_aNULL               0x00000004L | 
|  | /* Fixed DH auth (kDHd or kDHr) */ | 
|  | # define SSL_aDH                 0x00000008L | 
|  | /* Fixed ECDH auth (kECDHe or kECDHr) */ | 
|  | # define SSL_aECDH               0x00000010L | 
|  | /* ECDSA auth*/ | 
|  | # define SSL_aECDSA              0x00000040L | 
|  | /* PSK auth */ | 
|  | # define SSL_aPSK                0x00000080L | 
|  | /* GOST R 34.10-2001 signature auth */ | 
|  | # define SSL_aGOST01                     0x00000200L | 
|  | /* SRP auth */ | 
|  | # define SSL_aSRP                0x00000400L | 
|  |  | 
|  | /* Bits for algorithm_enc (symmetric encryption) */ | 
|  | # define SSL_DES                 0x00000001L | 
|  | # define SSL_3DES                0x00000002L | 
|  | # define SSL_RC4                 0x00000004L | 
|  | # define SSL_RC2                 0x00000008L | 
|  | # define SSL_IDEA                0x00000010L | 
|  | # define SSL_eNULL               0x00000020L | 
|  | # define SSL_AES128              0x00000040L | 
|  | # define SSL_AES256              0x00000080L | 
|  | # define SSL_CAMELLIA128         0x00000100L | 
|  | # define SSL_CAMELLIA256         0x00000200L | 
|  | # define SSL_eGOST2814789CNT     0x00000400L | 
|  | # define SSL_SEED                0x00000800L | 
|  | # define SSL_AES128GCM           0x00001000L | 
|  | # define SSL_AES256GCM           0x00002000L | 
|  | # define SSL_AES128CCM           0x00004000L | 
|  | # define SSL_AES256CCM           0x00008000L | 
|  | # define SSL_AES128CCM8          0x00010000L | 
|  | # define SSL_AES256CCM8          0x00020000L | 
|  |  | 
|  | # define SSL_AES                 (SSL_AES128|SSL_AES256|SSL_AES128GCM|SSL_AES256GCM|SSL_AES128CCM|SSL_AES256CCM|SSL_AES128CCM8|SSL_AES256CCM8) | 
|  | # define SSL_CAMELLIA            (SSL_CAMELLIA128|SSL_CAMELLIA256) | 
|  |  | 
|  | /* Bits for algorithm_mac (symmetric authentication) */ | 
|  |  | 
|  | # define SSL_MD5                 0x00000001L | 
|  | # define SSL_SHA1                0x00000002L | 
|  | # define SSL_GOST94      0x00000004L | 
|  | # define SSL_GOST89MAC   0x00000008L | 
|  | # define SSL_SHA256              0x00000010L | 
|  | # define SSL_SHA384              0x00000020L | 
|  | /* Not a real MAC, just an indication it is part of cipher */ | 
|  | # define SSL_AEAD                0x00000040L | 
|  |  | 
|  | /* Bits for algorithm_ssl (protocol version) */ | 
|  | # define SSL_SSLV3               0x00000002L | 
|  | # define SSL_TLSV1               SSL_SSLV3/* for now */ | 
|  | # define SSL_TLSV1_2             0x00000004L | 
|  |  | 
|  | /* Bits for algorithm2 (handshake digests and other extra flags) */ | 
|  |  | 
|  | # define SSL_HANDSHAKE_MAC_MD5 0x10 | 
|  | # define SSL_HANDSHAKE_MAC_SHA 0x20 | 
|  | # define SSL_HANDSHAKE_MAC_GOST94 0x40 | 
|  | # define SSL_HANDSHAKE_MAC_SHA256 0x80 | 
|  | # define SSL_HANDSHAKE_MAC_SHA384 0x100 | 
|  | # define SSL_HANDSHAKE_MAC_DEFAULT (SSL_HANDSHAKE_MAC_MD5 | SSL_HANDSHAKE_MAC_SHA) | 
|  |  | 
|  | /* | 
|  | * When adding new digest in the ssl_ciph.c and increment SSM_MD_NUM_IDX make | 
|  | * sure to update this constant too | 
|  | */ | 
|  | # define SSL_MAX_DIGEST 6 | 
|  |  | 
|  | # define TLS1_PRF_DGST_SHIFT 10 | 
|  | # define TLS1_PRF_MD5 (SSL_HANDSHAKE_MAC_MD5 << TLS1_PRF_DGST_SHIFT) | 
|  | # define TLS1_PRF_SHA1 (SSL_HANDSHAKE_MAC_SHA << TLS1_PRF_DGST_SHIFT) | 
|  | # define TLS1_PRF_SHA256 (SSL_HANDSHAKE_MAC_SHA256 << TLS1_PRF_DGST_SHIFT) | 
|  | # define TLS1_PRF_SHA384 (SSL_HANDSHAKE_MAC_SHA384 << TLS1_PRF_DGST_SHIFT) | 
|  | # define TLS1_PRF_GOST94 (SSL_HANDSHAKE_MAC_GOST94 << TLS1_PRF_DGST_SHIFT) | 
|  | # define TLS1_PRF (TLS1_PRF_MD5 | TLS1_PRF_SHA1) | 
|  |  | 
|  | /* | 
|  | * Stream MAC for GOST ciphersuites from cryptopro draft (currently this also | 
|  | * goes into algorithm2) | 
|  | */ | 
|  | # define TLS1_STREAM_MAC 0x04 | 
|  |  | 
|  | /* | 
|  | * Export and cipher strength information. For each cipher we have to decide | 
|  | * whether it is exportable or not. This information is likely to change | 
|  | * over time, since the export control rules are no static technical issue. | 
|  | * | 
|  | * Independent of the export flag the cipher strength is sorted into classes. | 
|  | * SSL_EXP40 was denoting the 40bit US export limit of past times, which now | 
|  | * is at 56bit (SSL_EXP56). If the exportable cipher class is going to change | 
|  | * again (eg. to 64bit) the use of "SSL_EXP*" becomes blurred even more, | 
|  | * since SSL_EXP64 could be similar to SSL_LOW. | 
|  | * For this reason SSL_MICRO and SSL_MINI macros are included to widen the | 
|  | * namespace of SSL_LOW-SSL_HIGH to lower values. As development of speed | 
|  | * and ciphers goes, another extension to SSL_SUPER and/or SSL_ULTRA would | 
|  | * be possible. | 
|  | */ | 
|  | # define SSL_EXP_MASK            0x00000003L | 
|  | # define SSL_STRONG_MASK         0x000001fcL | 
|  | # define SSL_DEFAULT_MASK        0X00000200L | 
|  |  | 
|  | # define SSL_NOT_EXP             0x00000001L | 
|  | # define SSL_EXPORT              0x00000002L | 
|  |  | 
|  | # define SSL_STRONG_NONE         0x00000004L | 
|  | # define SSL_EXP40               0x00000008L | 
|  | # define SSL_MICRO               (SSL_EXP40) | 
|  | # define SSL_EXP56               0x00000010L | 
|  | # define SSL_MINI                (SSL_EXP56) | 
|  | # define SSL_LOW                 0x00000020L | 
|  | # define SSL_MEDIUM              0x00000040L | 
|  | # define SSL_HIGH                0x00000080L | 
|  | # define SSL_FIPS                0x00000100L | 
|  |  | 
|  | # define SSL_NOT_DEFAULT         0x00000200L | 
|  |  | 
|  | /* we have used 000003ff - 22 bits left to go */ | 
|  |  | 
|  | /*- | 
|  | * Macros to check the export status and cipher strength for export ciphers. | 
|  | * Even though the macros for EXPORT and EXPORT40/56 have similar names, | 
|  | * their meaning is different: | 
|  | * *_EXPORT macros check the 'exportable' status. | 
|  | * *_EXPORT40/56 macros are used to check whether a certain cipher strength | 
|  | *          is given. | 
|  | * Since the SSL_IS_EXPORT* and SSL_EXPORT* macros depend on the correct | 
|  | * algorithm structure element to be passed (algorithms, algo_strength) and no | 
|  | * typechecking can be done as they are all of type unsigned long, their | 
|  | * direct usage is discouraged. | 
|  | * Use the SSL_C_* macros instead. | 
|  | */ | 
|  | # define SSL_IS_EXPORT(a)        ((a)&SSL_EXPORT) | 
|  | # define SSL_IS_EXPORT56(a)      ((a)&SSL_EXP56) | 
|  | # define SSL_IS_EXPORT40(a)      ((a)&SSL_EXP40) | 
|  | # define SSL_C_IS_EXPORT(c)      SSL_IS_EXPORT((c)->algo_strength) | 
|  | # define SSL_C_IS_EXPORT56(c)    SSL_IS_EXPORT56((c)->algo_strength) | 
|  | # define SSL_C_IS_EXPORT40(c)    SSL_IS_EXPORT40((c)->algo_strength) | 
|  |  | 
|  | # define SSL_EXPORT_KEYLENGTH(a,s)       (SSL_IS_EXPORT40(s) ? 5 : \ | 
|  | (a) == SSL_DES ? 8 : 7) | 
|  | # define SSL_EXPORT_PKEYLENGTH(a) (SSL_IS_EXPORT40(a) ? 512 : 1024) | 
|  | # define SSL_C_EXPORT_KEYLENGTH(c)       SSL_EXPORT_KEYLENGTH((c)->algorithm_enc, \ | 
|  | (c)->algo_strength) | 
|  | # define SSL_C_EXPORT_PKEYLENGTH(c)      SSL_EXPORT_PKEYLENGTH((c)->algo_strength) | 
|  |  | 
|  | /* Check if an SSL structure is using DTLS */ | 
|  | # define SSL_IS_DTLS(s)  (s->method->ssl3_enc->enc_flags & SSL_ENC_FLAG_DTLS) | 
|  | /* See if we need explicit IV */ | 
|  | # define SSL_USE_EXPLICIT_IV(s)  \ | 
|  | (s->method->ssl3_enc->enc_flags & SSL_ENC_FLAG_EXPLICIT_IV) | 
|  | /* | 
|  | * See if we use signature algorithms extension and signature algorithm | 
|  | * before signatures. | 
|  | */ | 
|  | # define SSL_USE_SIGALGS(s)      \ | 
|  | (s->method->ssl3_enc->enc_flags & SSL_ENC_FLAG_SIGALGS) | 
|  | /* | 
|  | * Allow TLS 1.2 ciphersuites: applies to DTLS 1.2 as well as TLS 1.2: may | 
|  | * apply to others in future. | 
|  | */ | 
|  | # define SSL_USE_TLS1_2_CIPHERS(s)       \ | 
|  | (s->method->ssl3_enc->enc_flags & SSL_ENC_FLAG_TLS1_2_CIPHERS) | 
|  | /* | 
|  | * Determine if a client can use TLS 1.2 ciphersuites: can't rely on method | 
|  | * flags because it may not be set to correct version yet. | 
|  | */ | 
|  | # define SSL_CLIENT_USE_TLS1_2_CIPHERS(s)        \ | 
|  | ((SSL_IS_DTLS(s) && s->client_version <= DTLS1_2_VERSION) || \ | 
|  | (!SSL_IS_DTLS(s) && s->client_version >= TLS1_2_VERSION)) | 
|  |  | 
|  | # ifdef TLSEXT_TYPE_encrypt_then_mac | 
|  | #  define SSL_USE_ETM(s) (s->s3->flags & TLS1_FLAGS_ENCRYPT_THEN_MAC) | 
|  | # else | 
|  | #  define SSL_USE_ETM(s) (0) | 
|  | # endif | 
|  |  | 
|  | /* Mostly for SSLv3 */ | 
|  | # define SSL_PKEY_RSA_ENC        0 | 
|  | # define SSL_PKEY_RSA_SIGN       1 | 
|  | # define SSL_PKEY_DSA_SIGN       2 | 
|  | # define SSL_PKEY_DH_RSA         3 | 
|  | # define SSL_PKEY_DH_DSA         4 | 
|  | # define SSL_PKEY_ECC            5 | 
|  | # define SSL_PKEY_GOST01         7 | 
|  | # define SSL_PKEY_NUM            8 | 
|  |  | 
|  | /*- | 
|  | * SSL_kRSA <- RSA_ENC | (RSA_TMP & RSA_SIGN) | | 
|  | *          <- (EXPORT & (RSA_ENC | RSA_TMP) & RSA_SIGN) | 
|  | * SSL_kDH  <- DH_ENC & (RSA_ENC | RSA_SIGN | DSA_SIGN) | 
|  | * SSL_kDHE <- RSA_ENC | RSA_SIGN | DSA_SIGN | 
|  | * SSL_aRSA <- RSA_ENC | RSA_SIGN | 
|  | * SSL_aDSS <- DSA_SIGN | 
|  | */ | 
|  |  | 
|  | /*- | 
|  | #define CERT_INVALID            0 | 
|  | #define CERT_PUBLIC_KEY         1 | 
|  | #define CERT_PRIVATE_KEY        2 | 
|  | */ | 
|  |  | 
|  |  | 
|  | /* CipherSuite length. SSLv3 and all TLS versions. */ | 
|  | #define TLS_CIPHER_LEN 2 | 
|  | /* used to hold info on the particular ciphers used */ | 
|  | struct ssl_cipher_st { | 
|  | int valid; | 
|  | const char *name;           /* text name */ | 
|  | unsigned long id;           /* id, 4 bytes, first is version */ | 
|  | /* | 
|  | * changed in 0.9.9: these four used to be portions of a single value | 
|  | * 'algorithms' | 
|  | */ | 
|  | unsigned long algorithm_mkey; /* key exchange algorithm */ | 
|  | unsigned long algorithm_auth; /* server authentication */ | 
|  | unsigned long algorithm_enc; /* symmetric encryption */ | 
|  | unsigned long algorithm_mac; /* symmetric authentication */ | 
|  | unsigned long algorithm_ssl; /* (major) protocol version */ | 
|  | unsigned long algo_strength; /* strength and export flags */ | 
|  | unsigned long algorithm2;   /* Extra flags */ | 
|  | int strength_bits;          /* Number of bits really used */ | 
|  | int alg_bits;               /* Number of bits for algorithm */ | 
|  | }; | 
|  |  | 
|  | /* Used to hold functions for SSLv2 or SSLv3/TLSv1 functions */ | 
|  | struct ssl_method_st { | 
|  | int version; | 
|  | int (*ssl_new) (SSL *s); | 
|  | void (*ssl_clear) (SSL *s); | 
|  | void (*ssl_free) (SSL *s); | 
|  | int (*ssl_accept) (SSL *s); | 
|  | int (*ssl_connect) (SSL *s); | 
|  | int (*ssl_read) (SSL *s, void *buf, int len); | 
|  | int (*ssl_peek) (SSL *s, void *buf, int len); | 
|  | int (*ssl_write) (SSL *s, const void *buf, int len); | 
|  | int (*ssl_shutdown) (SSL *s); | 
|  | int (*ssl_renegotiate) (SSL *s); | 
|  | int (*ssl_renegotiate_check) (SSL *s); | 
|  | int (*ssl_read_bytes) (SSL *s, int type, int *recvd_type, | 
|  | unsigned char *buf, int len, int peek); | 
|  | int (*ssl_write_bytes) (SSL *s, int type, const void *buf_, int len); | 
|  | int (*ssl_dispatch_alert) (SSL *s); | 
|  | long (*ssl_ctrl) (SSL *s, int cmd, long larg, void *parg); | 
|  | long (*ssl_ctx_ctrl) (SSL_CTX *ctx, int cmd, long larg, void *parg); | 
|  | const SSL_CIPHER *(*get_cipher_by_char) (const unsigned char *ptr); | 
|  | int (*put_cipher_by_char) (const SSL_CIPHER *cipher, unsigned char *ptr); | 
|  | int (*ssl_pending) (const SSL *s); | 
|  | int (*num_ciphers) (void); | 
|  | const SSL_CIPHER *(*get_cipher) (unsigned ncipher); | 
|  | const struct ssl_method_st *(*get_ssl_method) (int version); | 
|  | long (*get_timeout) (void); | 
|  | const struct ssl3_enc_method *ssl3_enc; /* Extra SSLv3/TLS stuff */ | 
|  | int (*ssl_version) (void); | 
|  | long (*ssl_callback_ctrl) (SSL *s, int cb_id, void (*fp) (void)); | 
|  | long (*ssl_ctx_callback_ctrl) (SSL_CTX *s, int cb_id, void (*fp) (void)); | 
|  | }; | 
|  |  | 
|  | /*- | 
|  | * Lets make this into an ASN.1 type structure as follows | 
|  | * SSL_SESSION_ID ::= SEQUENCE { | 
|  | *      version                 INTEGER,        -- structure version number | 
|  | *      SSLversion              INTEGER,        -- SSL version number | 
|  | *      Cipher                  OCTET STRING,   -- the 3 byte cipher ID | 
|  | *      Session_ID              OCTET STRING,   -- the Session ID | 
|  | *      Master_key              OCTET STRING,   -- the master key | 
|  | *      Key_Arg [ 0 ] IMPLICIT  OCTET STRING,   -- the optional Key argument | 
|  | *      Time [ 1 ] EXPLICIT     INTEGER,        -- optional Start Time | 
|  | *      Timeout [ 2 ] EXPLICIT  INTEGER,        -- optional Timeout ins seconds | 
|  | *      Peer [ 3 ] EXPLICIT     X509,           -- optional Peer Certificate | 
|  | *      Session_ID_context [ 4 ] EXPLICIT OCTET STRING,   -- the Session ID context | 
|  | *      Verify_result [ 5 ] EXPLICIT INTEGER,   -- X509_V_... code for `Peer' | 
|  | *      HostName [ 6 ] EXPLICIT OCTET STRING,   -- optional HostName from servername TLS extension | 
|  | *      PSK_identity_hint [ 7 ] EXPLICIT OCTET STRING, -- optional PSK identity hint | 
|  | *      PSK_identity [ 8 ] EXPLICIT OCTET STRING,  -- optional PSK identity | 
|  | *      Ticket_lifetime_hint [9] EXPLICIT INTEGER, -- server's lifetime hint for session ticket | 
|  | *      Ticket [10]             EXPLICIT OCTET STRING, -- session ticket (clients only) | 
|  | *      Compression_meth [11]   EXPLICIT OCTET STRING, -- optional compression method | 
|  | *      SRP_username [ 12 ] EXPLICIT OCTET STRING -- optional SRP username | 
|  | *      flags [ 13 ] EXPLICIT INTEGER -- optional flags | 
|  | *      } | 
|  | * Look in ssl/ssl_asn1.c for more details | 
|  | * I'm using EXPLICIT tags so I can read the damn things using asn1parse :-). | 
|  | */ | 
|  | struct ssl_session_st { | 
|  | int ssl_version;            /* what ssl version session info is being | 
|  | * kept in here? */ | 
|  | int master_key_length; | 
|  | unsigned char master_key[SSL_MAX_MASTER_KEY_LENGTH]; | 
|  | /* session_id - valid? */ | 
|  | unsigned int session_id_length; | 
|  | unsigned char session_id[SSL_MAX_SSL_SESSION_ID_LENGTH]; | 
|  | /* | 
|  | * this is used to determine whether the session is being reused in the | 
|  | * appropriate context. It is up to the application to set this, via | 
|  | * SSL_new | 
|  | */ | 
|  | unsigned int sid_ctx_length; | 
|  | unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; | 
|  | # ifndef OPENSSL_NO_PSK | 
|  | char *psk_identity_hint; | 
|  | char *psk_identity; | 
|  | # endif | 
|  | /* | 
|  | * Used to indicate that session resumption is not allowed. Applications | 
|  | * can also set this bit for a new session via not_resumable_session_cb | 
|  | * to disable session caching and tickets. | 
|  | */ | 
|  | int not_resumable; | 
|  | /* This is the cert and type for the other end. */ | 
|  | X509 *peer; | 
|  | int peer_type; | 
|  | /* Certificate chain of peer */ | 
|  | STACK_OF(X509) *peer_chain; | 
|  | /* | 
|  | * when app_verify_callback accepts a session where the peer's | 
|  | * certificate is not ok, we must remember the error for session reuse: | 
|  | */ | 
|  | long verify_result;         /* only for servers */ | 
|  | int references; | 
|  | long timeout; | 
|  | long time; | 
|  | unsigned int compress_meth; /* Need to lookup the method */ | 
|  | const SSL_CIPHER *cipher; | 
|  | unsigned long cipher_id;    /* when ASN.1 loaded, this needs to be used | 
|  | * to load the 'cipher' structure */ | 
|  | STACK_OF(SSL_CIPHER) *ciphers; /* shared ciphers? */ | 
|  | CRYPTO_EX_DATA ex_data;     /* application specific data */ | 
|  | /* | 
|  | * These are used to make removal of session-ids more efficient and to | 
|  | * implement a maximum cache size. | 
|  | */ | 
|  | struct ssl_session_st *prev, *next; | 
|  | char *tlsext_hostname; | 
|  | # ifndef OPENSSL_NO_EC | 
|  | size_t tlsext_ecpointformatlist_length; | 
|  | unsigned char *tlsext_ecpointformatlist; /* peer's list */ | 
|  | size_t tlsext_ellipticcurvelist_length; | 
|  | unsigned char *tlsext_ellipticcurvelist; /* peer's list */ | 
|  | # endif                       /* OPENSSL_NO_EC */ | 
|  | /* RFC4507 info */ | 
|  | unsigned char *tlsext_tick; /* Session ticket */ | 
|  | size_t tlsext_ticklen;      /* Session ticket length */ | 
|  | unsigned long tlsext_tick_lifetime_hint; /* Session lifetime hint in seconds */ | 
|  | # ifndef OPENSSL_NO_SRP | 
|  | char *srp_username; | 
|  | # endif | 
|  | uint32_t flags; | 
|  | }; | 
|  |  | 
|  | /* Extended master secret support */ | 
|  | #  define SSL_SESS_FLAG_EXTMS             0x1 | 
|  |  | 
|  |  | 
|  | # ifndef OPENSSL_NO_SRP | 
|  |  | 
|  | typedef struct srp_ctx_st { | 
|  | /* param for all the callbacks */ | 
|  | void *SRP_cb_arg; | 
|  | /* set client Hello login callback */ | 
|  | int (*TLS_ext_srp_username_callback) (SSL *, int *, void *); | 
|  | /* set SRP N/g param callback for verification */ | 
|  | int (*SRP_verify_param_callback) (SSL *, void *); | 
|  | /* set SRP client passwd callback */ | 
|  | char *(*SRP_give_srp_client_pwd_callback) (SSL *, void *); | 
|  | char *login; | 
|  | BIGNUM *N, *g, *s, *B, *A; | 
|  | BIGNUM *a, *b, *v; | 
|  | char *info; | 
|  | int strength; | 
|  | unsigned long srp_Mask; | 
|  | } SRP_CTX; | 
|  |  | 
|  | # endif | 
|  |  | 
|  | typedef struct ssl_comp_st SSL_COMP; | 
|  |  | 
|  | struct ssl_comp_st { | 
|  | int id; | 
|  | const char *name; | 
|  | COMP_METHOD *method; | 
|  | }; | 
|  |  | 
|  | DECLARE_STACK_OF(SSL_COMP) | 
|  | DECLARE_LHASH_OF(SSL_SESSION); | 
|  |  | 
|  |  | 
|  | struct ssl_ctx_st { | 
|  | const SSL_METHOD *method; | 
|  | STACK_OF(SSL_CIPHER) *cipher_list; | 
|  | /* same as above but sorted for lookup */ | 
|  | STACK_OF(SSL_CIPHER) *cipher_list_by_id; | 
|  | struct x509_store_st /* X509_STORE */ *cert_store; | 
|  | LHASH_OF(SSL_SESSION) *sessions; | 
|  | /* | 
|  | * Most session-ids that will be cached, default is | 
|  | * SSL_SESSION_CACHE_MAX_SIZE_DEFAULT. 0 is unlimited. | 
|  | */ | 
|  | unsigned long session_cache_size; | 
|  | struct ssl_session_st *session_cache_head; | 
|  | struct ssl_session_st *session_cache_tail; | 
|  | /* | 
|  | * This can have one of 2 values, ored together, SSL_SESS_CACHE_CLIENT, | 
|  | * SSL_SESS_CACHE_SERVER, Default is SSL_SESSION_CACHE_SERVER, which | 
|  | * means only SSL_accept which cache SSL_SESSIONS. | 
|  | */ | 
|  | uint32_t session_cache_mode; | 
|  | /* | 
|  | * If timeout is not 0, it is the default timeout value set when | 
|  | * SSL_new() is called.  This has been put in to make life easier to set | 
|  | * things up | 
|  | */ | 
|  | long session_timeout; | 
|  | /* | 
|  | * If this callback is not null, it will be called each time a session id | 
|  | * is added to the cache.  If this function returns 1, it means that the | 
|  | * callback will do a SSL_SESSION_free() when it has finished using it. | 
|  | * Otherwise, on 0, it means the callback has finished with it. If | 
|  | * remove_session_cb is not null, it will be called when a session-id is | 
|  | * removed from the cache.  After the call, OpenSSL will | 
|  | * SSL_SESSION_free() it. | 
|  | */ | 
|  | int (*new_session_cb) (struct ssl_st *ssl, SSL_SESSION *sess); | 
|  | void (*remove_session_cb) (struct ssl_ctx_st *ctx, SSL_SESSION *sess); | 
|  | SSL_SESSION *(*get_session_cb) (struct ssl_st *ssl, | 
|  | unsigned char *data, int len, int *copy); | 
|  | struct { | 
|  | int sess_connect;       /* SSL new conn - started */ | 
|  | int sess_connect_renegotiate; /* SSL reneg - requested */ | 
|  | int sess_connect_good;  /* SSL new conne/reneg - finished */ | 
|  | int sess_accept;        /* SSL new accept - started */ | 
|  | int sess_accept_renegotiate; /* SSL reneg - requested */ | 
|  | int sess_accept_good;   /* SSL accept/reneg - finished */ | 
|  | int sess_miss;          /* session lookup misses */ | 
|  | int sess_timeout;       /* reuse attempt on timeouted session */ | 
|  | int sess_cache_full;    /* session removed due to full cache */ | 
|  | int sess_hit;           /* session reuse actually done */ | 
|  | int sess_cb_hit;        /* session-id that was not in the cache was | 
|  | * passed back via the callback.  This | 
|  | * indicates that the application is | 
|  | * supplying session-id's from other | 
|  | * processes - spooky :-) */ | 
|  | } stats; | 
|  |  | 
|  | int references; | 
|  |  | 
|  | /* if defined, these override the X509_verify_cert() calls */ | 
|  | int (*app_verify_callback) (X509_STORE_CTX *, void *); | 
|  | void *app_verify_arg; | 
|  | /* | 
|  | * before OpenSSL 0.9.7, 'app_verify_arg' was ignored | 
|  | * ('app_verify_callback' was called with just one argument) | 
|  | */ | 
|  |  | 
|  | /* Default password callback. */ | 
|  | pem_password_cb *default_passwd_callback; | 
|  |  | 
|  | /* Default password callback user data. */ | 
|  | void *default_passwd_callback_userdata; | 
|  |  | 
|  | /* get client cert callback */ | 
|  | int (*client_cert_cb) (SSL *ssl, X509 **x509, EVP_PKEY **pkey); | 
|  |  | 
|  | /* cookie generate callback */ | 
|  | int (*app_gen_cookie_cb) (SSL *ssl, unsigned char *cookie, | 
|  | unsigned int *cookie_len); | 
|  |  | 
|  | /* verify cookie callback */ | 
|  | int (*app_verify_cookie_cb) (SSL *ssl, const unsigned char *cookie, | 
|  | unsigned int cookie_len); | 
|  |  | 
|  | CRYPTO_EX_DATA ex_data; | 
|  |  | 
|  | const EVP_MD *md5;          /* For SSLv3/TLSv1 'ssl3-md5' */ | 
|  | const EVP_MD *sha1;         /* For SSLv3/TLSv1 'ssl3->sha1' */ | 
|  |  | 
|  | STACK_OF(X509) *extra_certs; | 
|  | STACK_OF(SSL_COMP) *comp_methods; /* stack of SSL_COMP, SSLv3/TLSv1 */ | 
|  |  | 
|  | /* Default values used when no per-SSL value is defined follow */ | 
|  |  | 
|  | /* used if SSL's info_callback is NULL */ | 
|  | void (*info_callback) (const SSL *ssl, int type, int val); | 
|  |  | 
|  | /* what we put in client cert requests */ | 
|  | STACK_OF(X509_NAME) *client_CA; | 
|  |  | 
|  | /* | 
|  | * Default values to use in SSL structures follow (these are copied by | 
|  | * SSL_new) | 
|  | */ | 
|  |  | 
|  | uint32_t options; | 
|  | uint32_t mode; | 
|  | long max_cert_list; | 
|  |  | 
|  | struct cert_st /* CERT */ *cert; | 
|  | int read_ahead; | 
|  |  | 
|  | /* callback that allows applications to peek at protocol messages */ | 
|  | void (*msg_callback) (int write_p, int version, int content_type, | 
|  | const void *buf, size_t len, SSL *ssl, void *arg); | 
|  | void *msg_callback_arg; | 
|  |  | 
|  | uint32_t verify_mode; | 
|  | unsigned int sid_ctx_length; | 
|  | unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; | 
|  | /* called 'verify_callback' in the SSL */ | 
|  | int (*default_verify_callback) (int ok, X509_STORE_CTX *ctx); | 
|  |  | 
|  | /* Default generate session ID callback. */ | 
|  | GEN_SESSION_CB generate_session_id; | 
|  |  | 
|  | X509_VERIFY_PARAM *param; | 
|  |  | 
|  | int quiet_shutdown; | 
|  |  | 
|  | /* | 
|  | * Maximum amount of data to send in one fragment. actual record size can | 
|  | * be more than this due to padding and MAC overheads. | 
|  | */ | 
|  | unsigned int max_send_fragment; | 
|  |  | 
|  | #  ifndef OPENSSL_NO_ENGINE | 
|  | /* | 
|  | * Engine to pass requests for client certs to | 
|  | */ | 
|  | ENGINE *client_cert_engine; | 
|  | #  endif | 
|  |  | 
|  | /* TLS extensions servername callback */ | 
|  | int (*tlsext_servername_callback) (SSL *, int *, void *); | 
|  | void *tlsext_servername_arg; | 
|  | /* RFC 4507 session ticket keys */ | 
|  | unsigned char tlsext_tick_key_name[16]; | 
|  | unsigned char tlsext_tick_hmac_key[16]; | 
|  | unsigned char tlsext_tick_aes_key[16]; | 
|  | /* Callback to support customisation of ticket key setting */ | 
|  | int (*tlsext_ticket_key_cb) (SSL *ssl, | 
|  | unsigned char *name, unsigned char *iv, | 
|  | EVP_CIPHER_CTX *ectx, | 
|  | HMAC_CTX *hctx, int enc); | 
|  |  | 
|  | /* certificate status request info */ | 
|  | /* Callback for status request */ | 
|  | int (*tlsext_status_cb) (SSL *ssl, void *arg); | 
|  | void *tlsext_status_arg; | 
|  |  | 
|  | #  ifndef OPENSSL_NO_PSK | 
|  | unsigned int (*psk_client_callback) (SSL *ssl, const char *hint, | 
|  | char *identity, | 
|  | unsigned int max_identity_len, | 
|  | unsigned char *psk, | 
|  | unsigned int max_psk_len); | 
|  | unsigned int (*psk_server_callback) (SSL *ssl, const char *identity, | 
|  | unsigned char *psk, | 
|  | unsigned int max_psk_len); | 
|  | #  endif | 
|  |  | 
|  | #  ifndef OPENSSL_NO_SRP | 
|  | SRP_CTX srp_ctx;            /* ctx for SRP authentication */ | 
|  | #  endif | 
|  |  | 
|  | #  ifndef OPENSSL_NO_NEXTPROTONEG | 
|  | /* Next protocol negotiation information */ | 
|  | /* (for experimental NPN extension). */ | 
|  |  | 
|  | /* | 
|  | * For a server, this contains a callback function by which the set of | 
|  | * advertised protocols can be provided. | 
|  | */ | 
|  | int (*next_protos_advertised_cb) (SSL *s, const unsigned char **buf, | 
|  | unsigned int *len, void *arg); | 
|  | void *next_protos_advertised_cb_arg; | 
|  | /* | 
|  | * For a client, this contains a callback function that selects the next | 
|  | * protocol from the list provided by the server. | 
|  | */ | 
|  | int (*next_proto_select_cb) (SSL *s, unsigned char **out, | 
|  | unsigned char *outlen, | 
|  | const unsigned char *in, | 
|  | unsigned int inlen, void *arg); | 
|  | void *next_proto_select_cb_arg; | 
|  | #  endif | 
|  |  | 
|  | /* | 
|  | * ALPN information (we are in the process of transitioning from NPN to | 
|  | * ALPN.) | 
|  | */ | 
|  |  | 
|  | /*- | 
|  | * For a server, this contains a callback function that allows the | 
|  | * server to select the protocol for the connection. | 
|  | *   out: on successful return, this must point to the raw protocol | 
|  | *        name (without the length prefix). | 
|  | *   outlen: on successful return, this contains the length of |*out|. | 
|  | *   in: points to the client's list of supported protocols in | 
|  | *       wire-format. | 
|  | *   inlen: the length of |in|. | 
|  | */ | 
|  | int (*alpn_select_cb) (SSL *s, | 
|  | const unsigned char **out, | 
|  | unsigned char *outlen, | 
|  | const unsigned char *in, | 
|  | unsigned int inlen, void *arg); | 
|  | void *alpn_select_cb_arg; | 
|  |  | 
|  | /* | 
|  | * For a client, this contains the list of supported protocols in wire | 
|  | * format. | 
|  | */ | 
|  | unsigned char *alpn_client_proto_list; | 
|  | unsigned alpn_client_proto_list_len; | 
|  |  | 
|  | /* SRTP profiles we are willing to do from RFC 5764 */ | 
|  | STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; | 
|  | /* | 
|  | * Callback for disabling session caching and ticket support on a session | 
|  | * basis, depending on the chosen cipher. | 
|  | */ | 
|  | int (*not_resumable_session_cb) (SSL *ssl, int is_forward_secure); | 
|  | #  ifndef OPENSSL_NO_EC | 
|  | /* EC extension values inherited by SSL structure */ | 
|  | size_t tlsext_ecpointformatlist_length; | 
|  | unsigned char *tlsext_ecpointformatlist; | 
|  | size_t tlsext_ellipticcurvelist_length; | 
|  | unsigned char *tlsext_ellipticcurvelist; | 
|  | #  endif                        /* OPENSSL_NO_EC */ | 
|  | }; | 
|  |  | 
|  |  | 
|  | struct ssl_st { | 
|  | /* | 
|  | * protocol version (one of SSL2_VERSION, SSL3_VERSION, TLS1_VERSION, | 
|  | * DTLS1_VERSION) | 
|  | */ | 
|  | int version; | 
|  |  | 
|  | /* SSLv3 */ | 
|  | const SSL_METHOD *method; | 
|  | /* | 
|  | * There are 2 BIO's even though they are normally both the same.  This | 
|  | * is so data can be read and written to different handlers | 
|  | */ | 
|  | /* used by SSL_read */ | 
|  | BIO *rbio; | 
|  | /* used by SSL_write */ | 
|  | BIO *wbio; | 
|  | /* used during session-id reuse to concatenate messages */ | 
|  | BIO *bbio; | 
|  | /* | 
|  | * This holds a variable that indicates what we were doing when a 0 or -1 | 
|  | * is returned.  This is needed for non-blocking IO so we know what | 
|  | * request needs re-doing when in SSL_accept or SSL_connect | 
|  | */ | 
|  | int rwstate; | 
|  | /* true when we are actually in SSL_accept() or SSL_connect() */ | 
|  | int in_handshake; | 
|  | int (*handshake_func) (SSL *); | 
|  | /* | 
|  | * Imagine that here's a boolean member "init" that is switched as soon | 
|  | * as SSL_set_{accept/connect}_state is called for the first time, so | 
|  | * that "state" and "handshake_func" are properly initialized.  But as | 
|  | * handshake_func is == 0 until then, we use this test instead of an | 
|  | * "init" member. | 
|  | */ | 
|  | /* are we the server side? */ | 
|  | int server; | 
|  | /* | 
|  | * Generate a new session or reuse an old one. | 
|  | * NB: For servers, the 'new' session may actually be a previously | 
|  | * cached session or even the previous session unless | 
|  | * SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION is set | 
|  | */ | 
|  | int new_session; | 
|  | /* don't send shutdown packets */ | 
|  | int quiet_shutdown; | 
|  | /* we have shut things down, 0x01 sent, 0x02 for received */ | 
|  | int shutdown; | 
|  | /* where we are */ | 
|  | STATEM statem; | 
|  |  | 
|  | BUF_MEM *init_buf;          /* buffer used during init */ | 
|  | void *init_msg;             /* pointer to handshake message body, set by | 
|  | * ssl3_get_message() */ | 
|  | int init_num;               /* amount read/written */ | 
|  | int init_off;               /* amount read/written */ | 
|  |  | 
|  | struct ssl3_state_st *s3;   /* SSLv3 variables */ | 
|  | struct dtls1_state_st *d1;  /* DTLSv1 variables */ | 
|  |  | 
|  | /* Should we skip the CertificateVerify message? */ | 
|  | unsigned int no_cert_verify; | 
|  |  | 
|  | /* callback that allows applications to peek at protocol messages */ | 
|  | void (*msg_callback) (int write_p, int version, int content_type, | 
|  | const void *buf, size_t len, SSL *ssl, void *arg); | 
|  | void *msg_callback_arg; | 
|  | int hit;                    /* reusing a previous session */ | 
|  | X509_VERIFY_PARAM *param; | 
|  | /* crypto */ | 
|  | STACK_OF(SSL_CIPHER) *cipher_list; | 
|  | STACK_OF(SSL_CIPHER) *cipher_list_by_id; | 
|  | /* | 
|  | * These are the ones being used, the ones in SSL_SESSION are the ones to | 
|  | * be 'copied' into these ones | 
|  | */ | 
|  | uint32_t mac_flags; | 
|  | EVP_CIPHER_CTX *enc_read_ctx; /* cryptographic state */ | 
|  | EVP_MD_CTX *read_hash;      /* used for mac generation */ | 
|  | COMP_CTX *compress;         /* compression */ | 
|  | COMP_CTX *expand;           /* uncompress */ | 
|  | EVP_CIPHER_CTX *enc_write_ctx; /* cryptographic state */ | 
|  | EVP_MD_CTX *write_hash;     /* used for mac generation */ | 
|  | /* session info */ | 
|  | /* client cert? */ | 
|  | /* This is used to hold the server certificate used */ | 
|  | struct cert_st /* CERT */ *cert; | 
|  | /* | 
|  | * the session_id_context is used to ensure sessions are only reused in | 
|  | * the appropriate context | 
|  | */ | 
|  | unsigned int sid_ctx_length; | 
|  | unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; | 
|  | /* This can also be in the session once a session is established */ | 
|  | SSL_SESSION *session; | 
|  | /* Default generate session ID callback. */ | 
|  | GEN_SESSION_CB generate_session_id; | 
|  | /* Used in SSL3 */ | 
|  | /* | 
|  | * 0 don't care about verify failure. | 
|  | * 1 fail if verify fails | 
|  | */ | 
|  | uint32_t verify_mode; | 
|  | /* fail if callback returns 0 */ | 
|  | int (*verify_callback) (int ok, X509_STORE_CTX *ctx); | 
|  | /* optional informational callback */ | 
|  | void (*info_callback) (const SSL *ssl, int type, int val); | 
|  | /* error bytes to be written */ | 
|  | int error; | 
|  | /* actual code */ | 
|  | int error_code; | 
|  | #  ifndef OPENSSL_NO_PSK | 
|  | unsigned int (*psk_client_callback) (SSL *ssl, const char *hint, | 
|  | char *identity, | 
|  | unsigned int max_identity_len, | 
|  | unsigned char *psk, | 
|  | unsigned int max_psk_len); | 
|  | unsigned int (*psk_server_callback) (SSL *ssl, const char *identity, | 
|  | unsigned char *psk, | 
|  | unsigned int max_psk_len); | 
|  | #  endif | 
|  | SSL_CTX *ctx; | 
|  | /* | 
|  | * set this flag to 1 and a sleep(1) is put into all SSL_read() and | 
|  | * SSL_write() calls, good for nbio debuging :-) | 
|  | */ | 
|  | int debug; | 
|  | /* extra application data */ | 
|  | long verify_result; | 
|  | CRYPTO_EX_DATA ex_data; | 
|  | /* for server side, keep the list of CA_dn we can use */ | 
|  | STACK_OF(X509_NAME) *client_CA; | 
|  | int references; | 
|  | /* protocol behaviour */ | 
|  | uint32_t options; | 
|  | /* API behaviour */ | 
|  | uint32_t mode; | 
|  | long max_cert_list; | 
|  | int first_packet; | 
|  | /* what was passed, used for SSLv3/TLS rollback check */ | 
|  | int client_version; | 
|  | unsigned int max_send_fragment; | 
|  |  | 
|  | /* TLS extension debug callback */ | 
|  | void (*tlsext_debug_cb) (SSL *s, int client_server, int type, | 
|  | unsigned char *data, int len, void *arg); | 
|  | void *tlsext_debug_arg; | 
|  | char *tlsext_hostname; | 
|  | /*- | 
|  | * no further mod of servername | 
|  | * 0 : call the servername extension callback. | 
|  | * 1 : prepare 2, allow last ack just after in server callback. | 
|  | * 2 : don't call servername callback, no ack in server hello | 
|  | */ | 
|  | int servername_done; | 
|  | /* certificate status request info */ | 
|  | /* Status type or -1 if no status type */ | 
|  | int tlsext_status_type; | 
|  | /* Expect OCSP CertificateStatus message */ | 
|  | int tlsext_status_expected; | 
|  | /* OCSP status request only */ | 
|  | STACK_OF(OCSP_RESPID) *tlsext_ocsp_ids; | 
|  | X509_EXTENSIONS *tlsext_ocsp_exts; | 
|  | /* OCSP response received or to be sent */ | 
|  | unsigned char *tlsext_ocsp_resp; | 
|  | int tlsext_ocsp_resplen; | 
|  | /* RFC4507 session ticket expected to be received or sent */ | 
|  | int tlsext_ticket_expected; | 
|  | #  ifndef OPENSSL_NO_EC | 
|  | size_t tlsext_ecpointformatlist_length; | 
|  | /* our list */ | 
|  | unsigned char *tlsext_ecpointformatlist; | 
|  | size_t tlsext_ellipticcurvelist_length; | 
|  | /* our list */ | 
|  | unsigned char *tlsext_ellipticcurvelist; | 
|  | #  endif                       /* OPENSSL_NO_EC */ | 
|  | /* TLS Session Ticket extension override */ | 
|  | TLS_SESSION_TICKET_EXT *tlsext_session_ticket; | 
|  | /* TLS Session Ticket extension callback */ | 
|  | tls_session_ticket_ext_cb_fn tls_session_ticket_ext_cb; | 
|  | void *tls_session_ticket_ext_cb_arg; | 
|  | /* TLS pre-shared secret session resumption */ | 
|  | tls_session_secret_cb_fn tls_session_secret_cb; | 
|  | void *tls_session_secret_cb_arg; | 
|  | SSL_CTX *initial_ctx;       /* initial ctx, used to store sessions */ | 
|  | #  ifndef OPENSSL_NO_NEXTPROTONEG | 
|  | /* | 
|  | * Next protocol negotiation. For the client, this is the protocol that | 
|  | * we sent in NextProtocol and is set when handling ServerHello | 
|  | * extensions. For a server, this is the client's selected_protocol from | 
|  | * NextProtocol and is set when handling the NextProtocol message, before | 
|  | * the Finished message. | 
|  | */ | 
|  | unsigned char *next_proto_negotiated; | 
|  | unsigned char next_proto_negotiated_len; | 
|  | #  endif | 
|  | #  define session_ctx initial_ctx | 
|  | /* What we'll do */ | 
|  | STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; | 
|  | /* What's been chosen */ | 
|  | SRTP_PROTECTION_PROFILE *srtp_profile; | 
|  | /*- | 
|  | * Is use of the Heartbeat extension negotiated? | 
|  | *  0: disabled | 
|  | *  1: enabled | 
|  | *  2: enabled, but not allowed to send Requests | 
|  | */ | 
|  | unsigned int tlsext_heartbeat; | 
|  | /* Indicates if a HeartbeatRequest is in flight */ | 
|  | unsigned int tlsext_hb_pending; | 
|  | /* HeartbeatRequest sequence number */ | 
|  | unsigned int tlsext_hb_seq; | 
|  | /* | 
|  | * For a client, this contains the list of supported protocols in wire | 
|  | * format. | 
|  | */ | 
|  | unsigned char *alpn_client_proto_list; | 
|  | unsigned alpn_client_proto_list_len; | 
|  |  | 
|  | /*- | 
|  | * 1 if we are renegotiating. | 
|  | * 2 if we are a server and are inside a handshake | 
|  | * (i.e. not just sending a HelloRequest) | 
|  | */ | 
|  | int renegotiate; | 
|  | #  ifndef OPENSSL_NO_SRP | 
|  | /* ctx for SRP authentication */ | 
|  | SRP_CTX srp_ctx; | 
|  | #  endif | 
|  | /* | 
|  | * Callback for disabling session caching and ticket support on a session | 
|  | * basis, depending on the chosen cipher. | 
|  | */ | 
|  | int (*not_resumable_session_cb) (SSL *ssl, int is_forward_secure); | 
|  |  | 
|  | RECORD_LAYER rlayer; | 
|  | }; | 
|  |  | 
|  |  | 
|  | typedef struct ssl3_state_st { | 
|  | long flags; | 
|  | int read_mac_secret_size; | 
|  | unsigned char read_mac_secret[EVP_MAX_MD_SIZE]; | 
|  | int write_mac_secret_size; | 
|  | unsigned char write_mac_secret[EVP_MAX_MD_SIZE]; | 
|  | unsigned char server_random[SSL3_RANDOM_SIZE]; | 
|  | unsigned char client_random[SSL3_RANDOM_SIZE]; | 
|  | /* flags for countermeasure against known-IV weakness */ | 
|  | int need_empty_fragments; | 
|  | int empty_fragment_done; | 
|  | /* The value of 'extra' when the buffers were initialized */ | 
|  | int init_extra; | 
|  | /* used during startup, digest all incoming/outgoing packets */ | 
|  | BIO *handshake_buffer; | 
|  | /* | 
|  | * When set of handshake digests is determined, buffer is hashed and | 
|  | * freed and MD_CTX-es for all required digests are stored in this array | 
|  | */ | 
|  | EVP_MD_CTX **handshake_dgst; | 
|  | /* | 
|  | * Set whenever an expected ChangeCipherSpec message is processed. | 
|  | * Unset when the peer's Finished message is received. | 
|  | * Unexpected ChangeCipherSpec messages trigger a fatal alert. | 
|  | */ | 
|  | int change_cipher_spec; | 
|  | int warn_alert; | 
|  | int fatal_alert; | 
|  | /* | 
|  | * we allow one fatal and one warning alert to be outstanding, send close | 
|  | * alert via the warning alert | 
|  | */ | 
|  | int alert_dispatch; | 
|  | unsigned char send_alert[2]; | 
|  | /* | 
|  | * This flag is set when we should renegotiate ASAP, basically when there | 
|  | * is no more data in the read or write buffers | 
|  | */ | 
|  | int renegotiate; | 
|  | int total_renegotiations; | 
|  | int num_renegotiations; | 
|  | int in_read_app_data; | 
|  | struct { | 
|  | /* actually only needs to be 16+20 */ | 
|  | unsigned char cert_verify_md[EVP_MAX_MD_SIZE * 2]; | 
|  | /* actually only need to be 16+20 for SSLv3 and 12 for TLS */ | 
|  | unsigned char finish_md[EVP_MAX_MD_SIZE * 2]; | 
|  | int finish_md_len; | 
|  | unsigned char peer_finish_md[EVP_MAX_MD_SIZE * 2]; | 
|  | int peer_finish_md_len; | 
|  | unsigned long message_size; | 
|  | int message_type; | 
|  | /* used to hold the new cipher we are going to use */ | 
|  | const SSL_CIPHER *new_cipher; | 
|  | #  ifndef OPENSSL_NO_DH | 
|  | DH *dh; | 
|  | #  endif | 
|  | #  ifndef OPENSSL_NO_EC | 
|  | EC_KEY *ecdh;           /* holds short lived ECDH key */ | 
|  | #  endif | 
|  | /* used when SSL_ST_FLUSH_DATA is entered */ | 
|  | int next_state; | 
|  | /* used for certificate requests */ | 
|  | int cert_req; | 
|  | int ctype_num; | 
|  | char ctype[SSL3_CT_NUMBER]; | 
|  | STACK_OF(X509_NAME) *ca_names; | 
|  | int use_rsa_tmp; | 
|  | int key_block_length; | 
|  | unsigned char *key_block; | 
|  | const EVP_CIPHER *new_sym_enc; | 
|  | const EVP_MD *new_hash; | 
|  | int new_mac_pkey_type; | 
|  | int new_mac_secret_size; | 
|  | #  ifndef OPENSSL_NO_COMP | 
|  | const SSL_COMP *new_compression; | 
|  | #  else | 
|  | char *new_compression; | 
|  | #  endif | 
|  | int cert_request; | 
|  | /* Raw values of the cipher list from a client */ | 
|  | unsigned char *ciphers_raw; | 
|  | size_t ciphers_rawlen; | 
|  | /* Temporary storage for premaster secret */ | 
|  | unsigned char *pms; | 
|  | size_t pmslen; | 
|  | #ifndef OPENSSL_NO_PSK | 
|  | /* Temporary storage for PSK key */ | 
|  | unsigned char *psk; | 
|  | size_t psklen; | 
|  | #endif | 
|  | /* | 
|  | * signature algorithms peer reports: e.g. supported signature | 
|  | * algorithms extension for server or as part of a certificate | 
|  | * request for client. | 
|  | */ | 
|  | unsigned char *peer_sigalgs; | 
|  | /* Size of above array */ | 
|  | size_t peer_sigalgslen; | 
|  | /* Digest peer uses for signing */ | 
|  | const EVP_MD *peer_md; | 
|  | /* Array of digests used for signing */ | 
|  | const EVP_MD *md[SSL_PKEY_NUM]; | 
|  | /* | 
|  | * Set if corresponding CERT_PKEY can be used with current | 
|  | * SSL session: e.g. appropriate curve, signature algorithms etc. | 
|  | * If zero it can't be used at all. | 
|  | */ | 
|  | uint32_t valid_flags[SSL_PKEY_NUM]; | 
|  | /* | 
|  | * For servers the following masks are for the key and auth algorithms | 
|  | * that are supported by the certs below. For clients they are masks of | 
|  | * *disabled* algorithms based on the current session. | 
|  | */ | 
|  | unsigned long mask_k; | 
|  | unsigned long mask_a; | 
|  | unsigned long export_mask_k; | 
|  | unsigned long export_mask_a; | 
|  | /* Client only */ | 
|  | unsigned long mask_ssl; | 
|  | } tmp; | 
|  |  | 
|  | /* Connection binding to prevent renegotiation attacks */ | 
|  | unsigned char previous_client_finished[EVP_MAX_MD_SIZE]; | 
|  | unsigned char previous_client_finished_len; | 
|  | unsigned char previous_server_finished[EVP_MAX_MD_SIZE]; | 
|  | unsigned char previous_server_finished_len; | 
|  | int send_connection_binding; /* TODOEKR */ | 
|  |  | 
|  | #  ifndef OPENSSL_NO_NEXTPROTONEG | 
|  | /* | 
|  | * Set if we saw the Next Protocol Negotiation extension from our peer. | 
|  | */ | 
|  | int next_proto_neg_seen; | 
|  | #  endif | 
|  |  | 
|  | /* | 
|  | * ALPN information (we are in the process of transitioning from NPN to | 
|  | * ALPN.) | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * In a server these point to the selected ALPN protocol after the | 
|  | * ClientHello has been processed. In a client these contain the protocol | 
|  | * that the server selected once the ServerHello has been processed. | 
|  | */ | 
|  | unsigned char *alpn_selected; | 
|  | unsigned alpn_selected_len; | 
|  |  | 
|  | #   ifndef OPENSSL_NO_EC | 
|  | /* | 
|  | * This is set to true if we believe that this is a version of Safari | 
|  | * running on OS X 10.6 or newer. We wish to know this because Safari on | 
|  | * 10.8 .. 10.8.3 has broken ECDHE-ECDSA support. | 
|  | */ | 
|  | char is_probably_safari; | 
|  | #   endif                       /* !OPENSSL_NO_EC */ | 
|  |  | 
|  | /* For clients: peer temporary key */ | 
|  | # ifndef OPENSSL_NO_RSA | 
|  | RSA *peer_rsa_tmp; | 
|  | # endif | 
|  | # ifndef OPENSSL_NO_DH | 
|  | DH *peer_dh_tmp; | 
|  | # endif | 
|  | # ifndef OPENSSL_NO_EC | 
|  | EC_KEY *peer_ecdh_tmp; | 
|  | # endif | 
|  |  | 
|  | } SSL3_STATE; | 
|  |  | 
|  |  | 
|  | /* DTLS structures */ | 
|  |  | 
|  | #  ifndef OPENSSL_NO_SCTP | 
|  | #   define DTLS1_SCTP_AUTH_LABEL   "EXPORTER_DTLS_OVER_SCTP" | 
|  | #  endif | 
|  |  | 
|  | /* Max MTU overhead we know about so far is 40 for IPv6 + 8 for UDP */ | 
|  | #  define DTLS1_MAX_MTU_OVERHEAD                   48 | 
|  |  | 
|  | /* | 
|  | * Flag used in message reuse to indicate the buffer contains the record | 
|  | * header as well as the the handshake message header. | 
|  | */ | 
|  | #  define DTLS1_SKIP_RECORD_HEADER                 2 | 
|  |  | 
|  | struct dtls1_retransmit_state { | 
|  | EVP_CIPHER_CTX *enc_write_ctx; /* cryptographic state */ | 
|  | EVP_MD_CTX *write_hash;     /* used for mac generation */ | 
|  | COMP_CTX *compress;         /* compression */ | 
|  | SSL_SESSION *session; | 
|  | unsigned short epoch; | 
|  | }; | 
|  |  | 
|  | struct hm_header_st { | 
|  | unsigned char type; | 
|  | unsigned long msg_len; | 
|  | unsigned short seq; | 
|  | unsigned long frag_off; | 
|  | unsigned long frag_len; | 
|  | unsigned int is_ccs; | 
|  | struct dtls1_retransmit_state saved_retransmit_state; | 
|  | }; | 
|  |  | 
|  | struct dtls1_timeout_st { | 
|  | /* Number of read timeouts so far */ | 
|  | unsigned int read_timeouts; | 
|  | /* Number of write timeouts so far */ | 
|  | unsigned int write_timeouts; | 
|  | /* Number of alerts received so far */ | 
|  | unsigned int num_alerts; | 
|  | }; | 
|  |  | 
|  | typedef struct hm_fragment_st { | 
|  | struct hm_header_st msg_header; | 
|  | unsigned char *fragment; | 
|  | unsigned char *reassembly; | 
|  | } hm_fragment; | 
|  |  | 
|  | typedef struct dtls1_state_st { | 
|  | unsigned char cookie[DTLS1_COOKIE_LENGTH]; | 
|  | unsigned int cookie_len; | 
|  | unsigned int cookie_verified; | 
|  |  | 
|  | /* handshake message numbers */ | 
|  | unsigned short handshake_write_seq; | 
|  | unsigned short next_handshake_write_seq; | 
|  | unsigned short handshake_read_seq; | 
|  |  | 
|  | /* Buffered handshake messages */ | 
|  | pqueue buffered_messages; | 
|  | /* Buffered (sent) handshake records */ | 
|  | pqueue sent_messages; | 
|  |  | 
|  | unsigned int link_mtu;      /* max on-the-wire DTLS packet size */ | 
|  | unsigned int mtu;           /* max DTLS packet size */ | 
|  | struct hm_header_st w_msg_hdr; | 
|  | struct hm_header_st r_msg_hdr; | 
|  | struct dtls1_timeout_st timeout; | 
|  | /* | 
|  | * Indicates when the last handshake msg or heartbeat sent will timeout | 
|  | */ | 
|  | struct timeval next_timeout; | 
|  | /* Timeout duration */ | 
|  | unsigned short timeout_duration; | 
|  |  | 
|  | unsigned int retransmitting; | 
|  | #  ifndef OPENSSL_NO_SCTP | 
|  | /* used when SSL_ST_XX_FLUSH is entered */ | 
|  | int next_state; | 
|  | int shutdown_received; | 
|  | #  endif | 
|  | } DTLS1_STATE; | 
|  |  | 
|  |  | 
|  |  | 
|  | # ifndef OPENSSL_NO_EC | 
|  | /* | 
|  | * From ECC-TLS draft, used in encoding the curve type in ECParameters | 
|  | */ | 
|  | #  define EXPLICIT_PRIME_CURVE_TYPE  1 | 
|  | #  define EXPLICIT_CHAR2_CURVE_TYPE  2 | 
|  | #  define NAMED_CURVE_TYPE           3 | 
|  | # endif                         /* OPENSSL_NO_EC */ | 
|  |  | 
|  | typedef struct cert_pkey_st { | 
|  | X509 *x509; | 
|  | EVP_PKEY *privatekey; | 
|  | /* Chain for this certificate */ | 
|  | STACK_OF(X509) *chain; | 
|  |  | 
|  | /*- | 
|  | * serverinfo data for this certificate.  The data is in TLS Extension | 
|  | * wire format, specifically it's a series of records like: | 
|  | *   uint16_t extension_type; // (RFC 5246, 7.4.1.4, Extension) | 
|  | *   uint16_t length; | 
|  | *   uint8_t data[length]; | 
|  | */ | 
|  | unsigned char *serverinfo; | 
|  | size_t serverinfo_length; | 
|  | } CERT_PKEY; | 
|  | /* Retrieve Suite B flags */ | 
|  | # define tls1_suiteb(s)  (s->cert->cert_flags & SSL_CERT_FLAG_SUITEB_128_LOS) | 
|  | /* Uses to check strict mode: suite B modes are always strict */ | 
|  | # define SSL_CERT_FLAGS_CHECK_TLS_STRICT \ | 
|  | (SSL_CERT_FLAG_SUITEB_128_LOS|SSL_CERT_FLAG_TLS_STRICT) | 
|  |  | 
|  | typedef struct { | 
|  | unsigned short ext_type; | 
|  | /* | 
|  | * Per-connection flags relating to this extension type: not used if | 
|  | * part of an SSL_CTX structure. | 
|  | */ | 
|  | uint32_t ext_flags; | 
|  | custom_ext_add_cb add_cb; | 
|  | custom_ext_free_cb free_cb; | 
|  | void *add_arg; | 
|  | custom_ext_parse_cb parse_cb; | 
|  | void *parse_arg; | 
|  | } custom_ext_method; | 
|  |  | 
|  | /* ext_flags values */ | 
|  |  | 
|  | /* | 
|  | * Indicates an extension has been received. Used to check for unsolicited or | 
|  | * duplicate extensions. | 
|  | */ | 
|  | # define SSL_EXT_FLAG_RECEIVED   0x1 | 
|  | /* | 
|  | * Indicates an extension has been sent: used to enable sending of | 
|  | * corresponding ServerHello extension. | 
|  | */ | 
|  | # define SSL_EXT_FLAG_SENT       0x2 | 
|  |  | 
|  | typedef struct { | 
|  | custom_ext_method *meths; | 
|  | size_t meths_count; | 
|  | } custom_ext_methods; | 
|  |  | 
|  | typedef struct cert_st { | 
|  | /* Current active set */ | 
|  | /* | 
|  | * ALWAYS points to an element of the pkeys array | 
|  | * Probably it would make more sense to store | 
|  | * an index, not a pointer. | 
|  | */ | 
|  | CERT_PKEY *key; | 
|  | # ifndef OPENSSL_NO_RSA | 
|  | RSA *rsa_tmp; | 
|  | RSA *(*rsa_tmp_cb) (SSL *ssl, int is_export, int keysize); | 
|  | # endif | 
|  | # ifndef OPENSSL_NO_DH | 
|  | DH *dh_tmp; | 
|  | DH *(*dh_tmp_cb) (SSL *ssl, int is_export, int keysize); | 
|  | int dh_tmp_auto; | 
|  | # endif | 
|  | # ifndef OPENSSL_NO_EC | 
|  | EC_KEY *ecdh_tmp; | 
|  | /* Callback for generating ephemeral ECDH keys */ | 
|  | EC_KEY *(*ecdh_tmp_cb) (SSL *ssl, int is_export, int keysize); | 
|  | /* Select ECDH parameters automatically */ | 
|  | int ecdh_tmp_auto; | 
|  | # endif | 
|  | /* Flags related to certificates */ | 
|  | uint32_t cert_flags; | 
|  | CERT_PKEY pkeys[SSL_PKEY_NUM]; | 
|  | /* | 
|  | * Certificate types (received or sent) in certificate request message. | 
|  | * On receive this is only set if number of certificate types exceeds | 
|  | * SSL3_CT_NUMBER. | 
|  | */ | 
|  | unsigned char *ctypes; | 
|  | size_t ctype_num; | 
|  | /* | 
|  | * suppported signature algorithms. When set on a client this is sent in | 
|  | * the client hello as the supported signature algorithms extension. For | 
|  | * servers it represents the signature algorithms we are willing to use. | 
|  | */ | 
|  | unsigned char *conf_sigalgs; | 
|  | /* Size of above array */ | 
|  | size_t conf_sigalgslen; | 
|  | /* | 
|  | * Client authentication signature algorithms, if not set then uses | 
|  | * conf_sigalgs. On servers these will be the signature algorithms sent | 
|  | * to the client in a cerificate request for TLS 1.2. On a client this | 
|  | * represents the signature algortithms we are willing to use for client | 
|  | * authentication. | 
|  | */ | 
|  | unsigned char *client_sigalgs; | 
|  | /* Size of above array */ | 
|  | size_t client_sigalgslen; | 
|  | /* | 
|  | * Signature algorithms shared by client and server: cached because these | 
|  | * are used most often. | 
|  | */ | 
|  | TLS_SIGALGS *shared_sigalgs; | 
|  | size_t shared_sigalgslen; | 
|  | /* | 
|  | * Certificate setup callback: if set is called whenever a certificate | 
|  | * may be required (client or server). the callback can then examine any | 
|  | * appropriate parameters and setup any certificates required. This | 
|  | * allows advanced applications to select certificates on the fly: for | 
|  | * example based on supported signature algorithms or curves. | 
|  | */ | 
|  | int (*cert_cb) (SSL *ssl, void *arg); | 
|  | void *cert_cb_arg; | 
|  | /* | 
|  | * Optional X509_STORE for chain building or certificate validation If | 
|  | * NULL the parent SSL_CTX store is used instead. | 
|  | */ | 
|  | X509_STORE *chain_store; | 
|  | X509_STORE *verify_store; | 
|  | /* Custom extension methods for server and client */ | 
|  | custom_ext_methods cli_ext; | 
|  | custom_ext_methods srv_ext; | 
|  | /* Security callback */ | 
|  | int (*sec_cb) (SSL *s, SSL_CTX *ctx, int op, int bits, int nid, | 
|  | void *other, void *ex); | 
|  | /* Security level */ | 
|  | int sec_level; | 
|  | void *sec_ex; | 
|  | #ifndef OPENSSL_NO_PSK | 
|  | /* If not NULL psk identity hint to use for servers */ | 
|  | char *psk_identity_hint; | 
|  | #endif | 
|  | int references;             /* >1 only if SSL_copy_session_id is used */ | 
|  | } CERT; | 
|  |  | 
|  | /* Structure containing decoded values of signature algorithms extension */ | 
|  | struct tls_sigalgs_st { | 
|  | /* NID of hash algorithm */ | 
|  | int hash_nid; | 
|  | /* NID of signature algorithm */ | 
|  | int sign_nid; | 
|  | /* Combined hash and signature NID */ | 
|  | int signandhash_nid; | 
|  | /* Raw values used in extension */ | 
|  | unsigned char rsign; | 
|  | unsigned char rhash; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * #define MAC_DEBUG | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * #define ERR_DEBUG | 
|  | */ | 
|  | /* | 
|  | * #define ABORT_DEBUG | 
|  | */ | 
|  | /* | 
|  | * #define PKT_DEBUG 1 | 
|  | */ | 
|  | /* | 
|  | * #define DES_DEBUG | 
|  | */ | 
|  | /* | 
|  | * #define DES_OFB_DEBUG | 
|  | */ | 
|  | /* | 
|  | * #define SSL_DEBUG | 
|  | */ | 
|  | /* | 
|  | * #define RSA_DEBUG | 
|  | */ | 
|  | /* | 
|  | * #define IDEA_DEBUG | 
|  | */ | 
|  |  | 
|  | # define FP_ICC  (int (*)(const void *,const void *)) | 
|  |  | 
|  | /* | 
|  | * This is for the SSLv3/TLSv1.0 differences in crypto/hash stuff It is a bit | 
|  | * of a mess of functions, but hell, think of it as an opaque structure :-) | 
|  | */ | 
|  | typedef struct ssl3_enc_method { | 
|  | int (*enc) (SSL *, int); | 
|  | int (*mac) (SSL *, unsigned char *, int); | 
|  | int (*setup_key_block) (SSL *); | 
|  | int (*generate_master_secret) (SSL *, unsigned char *, unsigned char *, | 
|  | int); | 
|  | int (*change_cipher_state) (SSL *, int); | 
|  | int (*final_finish_mac) (SSL *, const char *, int, unsigned char *); | 
|  | int finish_mac_length; | 
|  | int (*cert_verify_mac) (SSL *, int, unsigned char *); | 
|  | const char *client_finished_label; | 
|  | int client_finished_label_len; | 
|  | const char *server_finished_label; | 
|  | int server_finished_label_len; | 
|  | int (*alert_value) (int); | 
|  | int (*export_keying_material) (SSL *, unsigned char *, size_t, | 
|  | const char *, size_t, | 
|  | const unsigned char *, size_t, | 
|  | int use_context); | 
|  | /* Various flags indicating protocol version requirements */ | 
|  | uint32_t enc_flags; | 
|  | /* Handshake header length */ | 
|  | unsigned int hhlen; | 
|  | /* Set the handshake header */ | 
|  | int (*set_handshake_header) (SSL *s, int type, unsigned long len); | 
|  | /* Write out handshake message */ | 
|  | int (*do_write) (SSL *s); | 
|  | } SSL3_ENC_METHOD; | 
|  |  | 
|  | # define SSL_HM_HEADER_LENGTH(s) s->method->ssl3_enc->hhlen | 
|  | # define ssl_handshake_start(s) \ | 
|  | (((unsigned char *)s->init_buf->data) + s->method->ssl3_enc->hhlen) | 
|  | # define ssl_set_handshake_header(s, htype, len) \ | 
|  | s->method->ssl3_enc->set_handshake_header(s, htype, len) | 
|  | # define ssl_do_write(s)  s->method->ssl3_enc->do_write(s) | 
|  |  | 
|  | /* Values for enc_flags */ | 
|  |  | 
|  | /* Uses explicit IV for CBC mode */ | 
|  | # define SSL_ENC_FLAG_EXPLICIT_IV        0x1 | 
|  | /* Uses signature algorithms extension */ | 
|  | # define SSL_ENC_FLAG_SIGALGS            0x2 | 
|  | /* Uses SHA256 default PRF */ | 
|  | # define SSL_ENC_FLAG_SHA256_PRF         0x4 | 
|  | /* Is DTLS */ | 
|  | # define SSL_ENC_FLAG_DTLS               0x8 | 
|  | /* | 
|  | * Allow TLS 1.2 ciphersuites: applies to DTLS 1.2 as well as TLS 1.2: may | 
|  | * apply to others in future. | 
|  | */ | 
|  | # define SSL_ENC_FLAG_TLS1_2_CIPHERS     0x10 | 
|  |  | 
|  | # ifndef OPENSSL_NO_COMP | 
|  | /* Used for holding the relevant compression methods loaded into SSL_CTX */ | 
|  | typedef struct ssl3_comp_st { | 
|  | int comp_id;                /* The identifier byte for this compression | 
|  | * type */ | 
|  | char *name;                 /* Text name used for the compression type */ | 
|  | COMP_METHOD *method;        /* The method :-) */ | 
|  | } SSL3_COMP; | 
|  | # endif | 
|  |  | 
|  | extern SSL3_ENC_METHOD ssl3_undef_enc_method; | 
|  | OPENSSL_EXTERN const SSL_CIPHER ssl3_ciphers[]; | 
|  |  | 
|  | SSL_METHOD *ssl_bad_method(int ver); | 
|  |  | 
|  | extern const SSL3_ENC_METHOD TLSv1_enc_data; | 
|  | extern const SSL3_ENC_METHOD TLSv1_1_enc_data; | 
|  | extern const SSL3_ENC_METHOD TLSv1_2_enc_data; | 
|  | extern const SSL3_ENC_METHOD SSLv3_enc_data; | 
|  | extern const SSL3_ENC_METHOD DTLSv1_enc_data; | 
|  | extern const SSL3_ENC_METHOD DTLSv1_2_enc_data; | 
|  |  | 
|  | # define IMPLEMENT_tls_meth_func(version, func_name, s_accept, s_connect, \ | 
|  | s_get_meth, enc_data) \ | 
|  | const SSL_METHOD *func_name(void)  \ | 
|  | { \ | 
|  | static const SSL_METHOD func_name##_data= { \ | 
|  | version, \ | 
|  | tls1_new, \ | 
|  | tls1_clear, \ | 
|  | tls1_free, \ | 
|  | s_accept, \ | 
|  | s_connect, \ | 
|  | ssl3_read, \ | 
|  | ssl3_peek, \ | 
|  | ssl3_write, \ | 
|  | ssl3_shutdown, \ | 
|  | ssl3_renegotiate, \ | 
|  | ssl3_renegotiate_check, \ | 
|  | ssl3_read_bytes, \ | 
|  | ssl3_write_bytes, \ | 
|  | ssl3_dispatch_alert, \ | 
|  | ssl3_ctrl, \ | 
|  | ssl3_ctx_ctrl, \ | 
|  | ssl3_get_cipher_by_char, \ | 
|  | ssl3_put_cipher_by_char, \ | 
|  | ssl3_pending, \ | 
|  | ssl3_num_ciphers, \ | 
|  | ssl3_get_cipher, \ | 
|  | s_get_meth, \ | 
|  | tls1_default_timeout, \ | 
|  | &enc_data, \ | 
|  | ssl_undefined_void_function, \ | 
|  | ssl3_callback_ctrl, \ | 
|  | ssl3_ctx_callback_ctrl, \ | 
|  | }; \ | 
|  | return &func_name##_data; \ | 
|  | } | 
|  |  | 
|  | # define IMPLEMENT_ssl3_meth_func(func_name, s_accept, s_connect, s_get_meth) \ | 
|  | const SSL_METHOD *func_name(void)  \ | 
|  | { \ | 
|  | static const SSL_METHOD func_name##_data= { \ | 
|  | SSL3_VERSION, \ | 
|  | ssl3_new, \ | 
|  | ssl3_clear, \ | 
|  | ssl3_free, \ | 
|  | s_accept, \ | 
|  | s_connect, \ | 
|  | ssl3_read, \ | 
|  | ssl3_peek, \ | 
|  | ssl3_write, \ | 
|  | ssl3_shutdown, \ | 
|  | ssl3_renegotiate, \ | 
|  | ssl3_renegotiate_check, \ | 
|  | ssl3_read_bytes, \ | 
|  | ssl3_write_bytes, \ | 
|  | ssl3_dispatch_alert, \ | 
|  | ssl3_ctrl, \ | 
|  | ssl3_ctx_ctrl, \ | 
|  | ssl3_get_cipher_by_char, \ | 
|  | ssl3_put_cipher_by_char, \ | 
|  | ssl3_pending, \ | 
|  | ssl3_num_ciphers, \ | 
|  | ssl3_get_cipher, \ | 
|  | s_get_meth, \ | 
|  | ssl3_default_timeout, \ | 
|  | &SSLv3_enc_data, \ | 
|  | ssl_undefined_void_function, \ | 
|  | ssl3_callback_ctrl, \ | 
|  | ssl3_ctx_callback_ctrl, \ | 
|  | }; \ | 
|  | return &func_name##_data; \ | 
|  | } | 
|  |  | 
|  | # define IMPLEMENT_dtls1_meth_func(version, func_name, s_accept, s_connect, \ | 
|  | s_get_meth, enc_data) \ | 
|  | const SSL_METHOD *func_name(void)  \ | 
|  | { \ | 
|  | static const SSL_METHOD func_name##_data= { \ | 
|  | version, \ | 
|  | dtls1_new, \ | 
|  | dtls1_clear, \ | 
|  | dtls1_free, \ | 
|  | s_accept, \ | 
|  | s_connect, \ | 
|  | ssl3_read, \ | 
|  | ssl3_peek, \ | 
|  | ssl3_write, \ | 
|  | dtls1_shutdown, \ | 
|  | ssl3_renegotiate, \ | 
|  | ssl3_renegotiate_check, \ | 
|  | dtls1_read_bytes, \ | 
|  | dtls1_write_app_data_bytes, \ | 
|  | dtls1_dispatch_alert, \ | 
|  | dtls1_ctrl, \ | 
|  | ssl3_ctx_ctrl, \ | 
|  | ssl3_get_cipher_by_char, \ | 
|  | ssl3_put_cipher_by_char, \ | 
|  | ssl3_pending, \ | 
|  | ssl3_num_ciphers, \ | 
|  | dtls1_get_cipher, \ | 
|  | s_get_meth, \ | 
|  | dtls1_default_timeout, \ | 
|  | &enc_data, \ | 
|  | ssl_undefined_void_function, \ | 
|  | ssl3_callback_ctrl, \ | 
|  | ssl3_ctx_callback_ctrl, \ | 
|  | }; \ | 
|  | return &func_name##_data; \ | 
|  | } | 
|  |  | 
|  | struct openssl_ssl_test_functions { | 
|  | int (*p_ssl_init_wbio_buffer) (SSL *s, int push); | 
|  | int (*p_ssl3_setup_buffers) (SSL *s); | 
|  | int (*p_tls1_process_heartbeat) (SSL *s, | 
|  | unsigned char *p, unsigned int length); | 
|  | int (*p_dtls1_process_heartbeat) (SSL *s, | 
|  | unsigned char *p, unsigned int length); | 
|  | }; | 
|  |  | 
|  | # ifndef OPENSSL_UNIT_TEST | 
|  |  | 
|  | void ssl_clear_cipher_ctx(SSL *s); | 
|  | int ssl_clear_bad_session(SSL *s); | 
|  | __owur CERT *ssl_cert_new(void); | 
|  | __owur CERT *ssl_cert_dup(CERT *cert); | 
|  | void ssl_cert_clear_certs(CERT *c); | 
|  | void ssl_cert_free(CERT *c); | 
|  | __owur int ssl_get_new_session(SSL *s, int session); | 
|  | __owur int ssl_get_prev_session(SSL *s, const PACKET *ext, | 
|  | const PACKET *session_id); | 
|  | __owur SSL_SESSION *ssl_session_dup(SSL_SESSION *src, int ticket); | 
|  | __owur int ssl_cipher_id_cmp(const SSL_CIPHER *a, const SSL_CIPHER *b); | 
|  | DECLARE_OBJ_BSEARCH_GLOBAL_CMP_FN(SSL_CIPHER, SSL_CIPHER, ssl_cipher_id); | 
|  | __owur int ssl_cipher_ptr_id_cmp(const SSL_CIPHER *const *ap, | 
|  | const SSL_CIPHER *const *bp); | 
|  | __owur STACK_OF(SSL_CIPHER) *ssl_create_cipher_list(const SSL_METHOD *meth, | 
|  | STACK_OF(SSL_CIPHER) **pref, | 
|  | STACK_OF(SSL_CIPHER) **sorted, | 
|  | const char *rule_str, CERT *c); | 
|  | void ssl_update_cache(SSL *s, int mode); | 
|  | __owur int ssl_cipher_get_evp(const SSL_SESSION *s, const EVP_CIPHER **enc, | 
|  | const EVP_MD **md, int *mac_pkey_type, | 
|  | int *mac_secret_size, SSL_COMP **comp, int use_etm); | 
|  | __owur int ssl_get_handshake_digest(int i, long *mask, const EVP_MD **md); | 
|  | __owur int ssl_cipher_get_cert_index(const SSL_CIPHER *c); | 
|  | __owur const SSL_CIPHER *ssl_get_cipher_by_char(SSL *ssl, const unsigned char *ptr); | 
|  | __owur int ssl_cert_set0_chain(SSL *s, SSL_CTX *ctx, STACK_OF(X509) *chain); | 
|  | __owur int ssl_cert_set1_chain(SSL *s, SSL_CTX *ctx, STACK_OF(X509) *chain); | 
|  | __owur int ssl_cert_add0_chain_cert(SSL *s, SSL_CTX *ctx, X509 *x); | 
|  | __owur int ssl_cert_add1_chain_cert(SSL *s, SSL_CTX *ctx, X509 *x); | 
|  | __owur int ssl_cert_select_current(CERT *c, X509 *x); | 
|  | __owur int ssl_cert_set_current(CERT *c, long arg); | 
|  | __owur X509 *ssl_cert_get0_next_certificate(CERT *c, int first); | 
|  | void ssl_cert_set_cert_cb(CERT *c, int (*cb) (SSL *ssl, void *arg), | 
|  | void *arg); | 
|  |  | 
|  | __owur int ssl_verify_cert_chain(SSL *s, STACK_OF(X509) *sk); | 
|  | __owur int ssl_add_cert_chain(SSL *s, CERT_PKEY *cpk, unsigned long *l); | 
|  | __owur int ssl_build_cert_chain(SSL *s, SSL_CTX *ctx, int flags); | 
|  | __owur int ssl_cert_set_cert_store(CERT *c, X509_STORE *store, int chain, int ref); | 
|  |  | 
|  | __owur int ssl_security(SSL *s, int op, int bits, int nid, void *other); | 
|  | __owur int ssl_ctx_security(SSL_CTX *ctx, int op, int bits, int nid, void *other); | 
|  |  | 
|  | int ssl_undefined_function(SSL *s); | 
|  | __owur int ssl_undefined_void_function(void); | 
|  | __owur int ssl_undefined_const_function(const SSL *s); | 
|  | __owur CERT_PKEY *ssl_get_server_send_pkey(SSL *s); | 
|  | __owur int ssl_get_server_cert_serverinfo(SSL *s, const unsigned char **serverinfo, | 
|  | size_t *serverinfo_length); | 
|  | __owur EVP_PKEY *ssl_get_sign_pkey(SSL *s, const SSL_CIPHER *c, const EVP_MD **pmd); | 
|  | __owur int ssl_cert_type(X509 *x, EVP_PKEY *pkey); | 
|  | void ssl_set_masks(SSL *s, const SSL_CIPHER *cipher); | 
|  | __owur STACK_OF(SSL_CIPHER) *ssl_get_ciphers_by_id(SSL *s); | 
|  | __owur int ssl_verify_alarm_type(long type); | 
|  | void ssl_load_ciphers(void); | 
|  | __owur int ssl_fill_hello_random(SSL *s, int server, unsigned char *field, int len); | 
|  | __owur int ssl_generate_master_secret(SSL *s, unsigned char *pms, size_t pmslen, | 
|  | int free_pms); | 
|  |  | 
|  | __owur const SSL_CIPHER *ssl3_get_cipher_by_char(const unsigned char *p); | 
|  | __owur int ssl3_put_cipher_by_char(const SSL_CIPHER *c, unsigned char *p); | 
|  | void ssl3_init_finished_mac(SSL *s); | 
|  | __owur int tls_construct_server_certificate(SSL *s); | 
|  | __owur int tls_construct_new_session_ticket(SSL *s); | 
|  | __owur int tls_construct_cert_status(SSL *s); | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_change_cipher_spec(SSL *s, | 
|  | PACKET *pkt); | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_finished(SSL *s, PACKET *pkt); | 
|  | __owur int ssl3_setup_key_block(SSL *s); | 
|  | __owur int tls_construct_change_cipher_spec(SSL *s); | 
|  | __owur int dtls_construct_change_cipher_spec(SSL *s); | 
|  | __owur int ssl3_change_cipher_state(SSL *s, int which); | 
|  | void ssl3_cleanup_key_block(SSL *s); | 
|  | __owur int ssl3_do_write(SSL *s, int type); | 
|  | int ssl3_send_alert(SSL *s, int level, int desc); | 
|  | __owur int ssl3_generate_master_secret(SSL *s, unsigned char *out, | 
|  | unsigned char *p, int len); | 
|  | __owur int ssl3_get_req_cert_type(SSL *s, unsigned char *p); | 
|  | __owur long ssl3_get_message(SSL *s, int st1, int stn, int mt, long max, int *ok); | 
|  | __owur int tls_get_message_header(SSL *s, int *mt); | 
|  | __owur int tls_get_message_body(SSL *s, unsigned long *len); | 
|  | __owur int tls_construct_finished(SSL *s, const char *sender, int slen); | 
|  | __owur enum WORK_STATE tls_finish_handshake(SSL *s, enum WORK_STATE wst); | 
|  | __owur enum WORK_STATE dtls_wait_for_dry(SSL *s); | 
|  | __owur int ssl3_num_ciphers(void); | 
|  | __owur const SSL_CIPHER *ssl3_get_cipher(unsigned int u); | 
|  | int ssl3_renegotiate(SSL *ssl); | 
|  | int ssl3_renegotiate_check(SSL *ssl); | 
|  | __owur int ssl3_dispatch_alert(SSL *s); | 
|  | __owur int ssl3_final_finish_mac(SSL *s, const char *sender, int slen, | 
|  | unsigned char *p); | 
|  | __owur int ssl3_cert_verify_mac(SSL *s, int md_nid, unsigned char *p); | 
|  | void ssl3_finish_mac(SSL *s, const unsigned char *buf, int len); | 
|  | void ssl3_free_digest_list(SSL *s); | 
|  | __owur unsigned long ssl3_output_cert_chain(SSL *s, CERT_PKEY *cpk); | 
|  | __owur SSL_CIPHER *ssl3_choose_cipher(SSL *ssl, STACK_OF(SSL_CIPHER) *clnt, | 
|  | STACK_OF(SSL_CIPHER) *srvr); | 
|  | __owur int ssl3_digest_cached_records(SSL *s, int keep); | 
|  | __owur int ssl3_new(SSL *s); | 
|  | void ssl3_free(SSL *s); | 
|  | __owur int ssl3_read(SSL *s, void *buf, int len); | 
|  | __owur int ssl3_peek(SSL *s, void *buf, int len); | 
|  | __owur int ssl3_write(SSL *s, const void *buf, int len); | 
|  | __owur int ssl3_shutdown(SSL *s); | 
|  | void ssl3_clear(SSL *s); | 
|  | __owur long ssl3_ctrl(SSL *s, int cmd, long larg, void *parg); | 
|  | __owur long ssl3_ctx_ctrl(SSL_CTX *s, int cmd, long larg, void *parg); | 
|  | __owur long ssl3_callback_ctrl(SSL *s, int cmd, void (*fp) (void)); | 
|  | __owur long ssl3_ctx_callback_ctrl(SSL_CTX *s, int cmd, void (*fp) (void)); | 
|  |  | 
|  | __owur int ssl3_do_change_cipher_spec(SSL *ssl); | 
|  | __owur long ssl3_default_timeout(void); | 
|  |  | 
|  | __owur int ssl3_set_handshake_header(SSL *s, int htype, unsigned long len); | 
|  | __owur int ssl3_handshake_write(SSL *s); | 
|  |  | 
|  | __owur int ssl_allow_compression(SSL *s); | 
|  |  | 
|  | __owur long tls1_default_timeout(void); | 
|  | __owur int dtls1_do_write(SSL *s, int type); | 
|  | void dtls1_set_message_header(SSL *s, | 
|  | unsigned char *p, unsigned char mt, | 
|  | unsigned long len, | 
|  | unsigned long frag_off, | 
|  | unsigned long frag_len); | 
|  |  | 
|  | __owur int dtls1_write_app_data_bytes(SSL *s, int type, const void *buf, int len); | 
|  |  | 
|  | __owur int dtls1_read_failed(SSL *s, int code); | 
|  | __owur int dtls1_buffer_message(SSL *s, int ccs); | 
|  | __owur int dtls1_retransmit_message(SSL *s, unsigned short seq, | 
|  | unsigned long frag_off, int *found); | 
|  | __owur int dtls1_get_queue_priority(unsigned short seq, int is_ccs); | 
|  | int dtls1_retransmit_buffered_messages(SSL *s); | 
|  | void dtls1_clear_record_buffer(SSL *s); | 
|  | void dtls1_get_message_header(unsigned char *data, | 
|  | struct hm_header_st *msg_hdr); | 
|  | __owur long dtls1_default_timeout(void); | 
|  | __owur struct timeval *dtls1_get_timeout(SSL *s, struct timeval *timeleft); | 
|  | __owur int dtls1_check_timeout_num(SSL *s); | 
|  | __owur int dtls1_handle_timeout(SSL *s); | 
|  | __owur const SSL_CIPHER *dtls1_get_cipher(unsigned int u); | 
|  | void dtls1_start_timer(SSL *s); | 
|  | void dtls1_stop_timer(SSL *s); | 
|  | __owur int dtls1_is_timer_expired(SSL *s); | 
|  | void dtls1_double_timeout(SSL *s); | 
|  | __owur unsigned int dtls_raw_hello_verify_request(unsigned char *buf, | 
|  | unsigned char *cookie, | 
|  | unsigned char cookie_len); | 
|  | __owur int dtls1_send_newsession_ticket(SSL *s); | 
|  | __owur unsigned int dtls1_min_mtu(SSL *s); | 
|  | __owur unsigned int dtls1_link_min_mtu(void); | 
|  | void dtls1_hm_fragment_free(hm_fragment *frag); | 
|  | __owur int dtls1_query_mtu(SSL *s); | 
|  |  | 
|  | /* some client-only functions */ | 
|  | __owur int tls_construct_client_hello(SSL *s); | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_server_hello(SSL *s, | 
|  | PACKET *pkt); | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_certificate_request(SSL *s, | 
|  | PACKET *pkt); | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_new_session_ticket(SSL *s, | 
|  | PACKET *pkt); | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_cert_status(SSL *s, PACKET *pkt); | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_server_done(SSL *s, PACKET *pkt); | 
|  | __owur int tls_construct_client_verify(SSL *s); | 
|  | __owur enum WORK_STATE tls_prepare_client_certificate(SSL *s, | 
|  | enum WORK_STATE wst); | 
|  | __owur int tls_construct_client_certificate(SSL *s); | 
|  | __owur int ssl_do_client_cert_cb(SSL *s, X509 **px509, EVP_PKEY **ppkey); | 
|  | __owur int tls_construct_client_key_exchange(SSL *s); | 
|  | __owur int tls_client_key_exchange_post_work(SSL *s); | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_key_exchange(SSL *s, | 
|  | PACKET *pkt); | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_server_certificate(SSL *s, | 
|  | PACKET *pkt); | 
|  | __owur int ssl3_check_cert_and_algorithm(SSL *s); | 
|  | #  ifndef OPENSSL_NO_NEXTPROTONEG | 
|  | __owur int tls_construct_next_proto(SSL *s); | 
|  | #  endif | 
|  | __owur enum MSG_PROCESS_RETURN dtls_process_hello_verify(SSL *s, PACKET *pkt); | 
|  |  | 
|  | /* some server-only functions */ | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_client_hello(SSL *s, PACKET *pkt); | 
|  | __owur enum WORK_STATE tls_post_process_client_hello(SSL *s, | 
|  | enum WORK_STATE wst); | 
|  | __owur int tls_construct_server_hello(SSL *s); | 
|  | __owur int tls_construct_hello_request(SSL *s); | 
|  | __owur int dtls_construct_hello_verify_request(SSL *s); | 
|  | __owur int tls_construct_server_key_exchange(SSL *s); | 
|  | __owur int tls_construct_certificate_request(SSL *s); | 
|  | __owur int tls_construct_server_done(SSL *s); | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_client_certificate(SSL *s, | 
|  | PACKET *pkt); | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_client_key_exchange(SSL *s, | 
|  | PACKET *pkt); | 
|  | __owur enum WORK_STATE tls_post_process_client_key_exchange(SSL *s, | 
|  | enum WORK_STATE wst); | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_cert_verify(SSL *s, PACKET *pkt); | 
|  | #  ifndef OPENSSL_NO_NEXTPROTONEG | 
|  | __owur enum MSG_PROCESS_RETURN tls_process_next_proto(SSL *s, PACKET *pkt); | 
|  | #  endif | 
|  |  | 
|  | __owur int tls1_new(SSL *s); | 
|  | void tls1_free(SSL *s); | 
|  | void tls1_clear(SSL *s); | 
|  | long tls1_ctrl(SSL *s, int cmd, long larg, void *parg); | 
|  | long tls1_callback_ctrl(SSL *s, int cmd, void (*fp) (void)); | 
|  |  | 
|  | __owur int dtls1_new(SSL *s); | 
|  | void dtls1_free(SSL *s); | 
|  | void dtls1_clear(SSL *s); | 
|  | long dtls1_ctrl(SSL *s, int cmd, long larg, void *parg); | 
|  | __owur int dtls1_shutdown(SSL *s); | 
|  |  | 
|  | __owur int dtls_get_message(SSL *s, int *mt, unsigned long *len); | 
|  | __owur int dtls1_dispatch_alert(SSL *s); | 
|  |  | 
|  | __owur int ssl_init_wbio_buffer(SSL *s, int push); | 
|  | void ssl_free_wbio_buffer(SSL *s); | 
|  |  | 
|  | __owur int tls1_change_cipher_state(SSL *s, int which); | 
|  | __owur int tls1_setup_key_block(SSL *s); | 
|  | __owur int tls1_final_finish_mac(SSL *s, | 
|  | const char *str, int slen, unsigned char *p); | 
|  | __owur int tls1_cert_verify_mac(SSL *s, int md_nid, unsigned char *p); | 
|  | __owur int tls1_generate_master_secret(SSL *s, unsigned char *out, | 
|  | unsigned char *p, int len); | 
|  | __owur int tls1_export_keying_material(SSL *s, unsigned char *out, size_t olen, | 
|  | const char *label, size_t llen, | 
|  | const unsigned char *p, size_t plen, | 
|  | int use_context); | 
|  | __owur int tls1_alert_code(int code); | 
|  | __owur int ssl3_alert_code(int code); | 
|  | __owur int ssl_ok(SSL *s); | 
|  |  | 
|  | #  ifndef OPENSSL_NO_EC | 
|  | __owur int ssl_check_srvr_ecc_cert_and_alg(X509 *x, SSL *s); | 
|  | #  endif | 
|  |  | 
|  | SSL_COMP *ssl3_comp_find(STACK_OF(SSL_COMP) *sk, int n); | 
|  |  | 
|  | #  ifndef OPENSSL_NO_EC | 
|  | __owur int tls1_ec_curve_id2nid(int curve_id); | 
|  | __owur int tls1_ec_nid2curve_id(int nid); | 
|  | __owur int tls1_check_curve(SSL *s, const unsigned char *p, size_t len); | 
|  | __owur int tls1_shared_curve(SSL *s, int nmatch); | 
|  | __owur int tls1_set_curves(unsigned char **pext, size_t *pextlen, | 
|  | int *curves, size_t ncurves); | 
|  | __owur int tls1_set_curves_list(unsigned char **pext, size_t *pextlen, | 
|  | const char *str); | 
|  | __owur int tls1_check_ec_tmp_key(SSL *s, unsigned long id); | 
|  | #  endif                        /* OPENSSL_NO_EC */ | 
|  |  | 
|  | __owur int tls1_shared_list(SSL *s, | 
|  | const unsigned char *l1, size_t l1len, | 
|  | const unsigned char *l2, size_t l2len, int nmatch); | 
|  | __owur unsigned char *ssl_add_clienthello_tlsext(SSL *s, unsigned char *buf, | 
|  | unsigned char *limit, int *al); | 
|  | __owur unsigned char *ssl_add_serverhello_tlsext(SSL *s, unsigned char *buf, | 
|  | unsigned char *limit, int *al); | 
|  | __owur int ssl_parse_clienthello_tlsext(SSL *s, PACKET *pkt); | 
|  | __owur int tls1_set_server_sigalgs(SSL *s); | 
|  | __owur int ssl_check_clienthello_tlsext_late(SSL *s); | 
|  | __owur int ssl_parse_serverhello_tlsext(SSL *s, PACKET *pkt); | 
|  | __owur int ssl_prepare_clienthello_tlsext(SSL *s); | 
|  | __owur int ssl_prepare_serverhello_tlsext(SSL *s); | 
|  |  | 
|  | #  ifndef OPENSSL_NO_HEARTBEATS | 
|  | __owur int tls1_heartbeat(SSL *s); | 
|  | __owur int dtls1_heartbeat(SSL *s); | 
|  | __owur int tls1_process_heartbeat(SSL *s, unsigned char *p, unsigned int length); | 
|  | __owur int dtls1_process_heartbeat(SSL *s, unsigned char *p, unsigned int length); | 
|  | #  endif | 
|  |  | 
|  | __owur int tls1_process_ticket(SSL *s, const PACKET *ext, | 
|  | const PACKET *session_id, SSL_SESSION **ret); | 
|  |  | 
|  | __owur int tls12_get_sigandhash(unsigned char *p, const EVP_PKEY *pk, | 
|  | const EVP_MD *md); | 
|  | __owur int tls12_get_sigid(const EVP_PKEY *pk); | 
|  | __owur const EVP_MD *tls12_get_hash(unsigned char hash_alg); | 
|  | void ssl_set_sig_mask(unsigned long *pmask_a, SSL *s, int op); | 
|  |  | 
|  | __owur int tls1_set_sigalgs_list(CERT *c, const char *str, int client); | 
|  | __owur int tls1_set_sigalgs(CERT *c, const int *salg, size_t salglen, int client); | 
|  | int tls1_check_chain(SSL *s, X509 *x, EVP_PKEY *pk, STACK_OF(X509) *chain, | 
|  | int idx); | 
|  | void tls1_set_cert_validity(SSL *s); | 
|  |  | 
|  | #  ifndef OPENSSL_NO_DH | 
|  | __owur DH *ssl_get_auto_dh(SSL *s); | 
|  | #  endif | 
|  |  | 
|  | __owur int ssl_security_cert(SSL *s, SSL_CTX *ctx, X509 *x, int vfy, int is_ee); | 
|  | __owur int ssl_security_cert_chain(SSL *s, STACK_OF(X509) *sk, X509 *ex, int vfy); | 
|  |  | 
|  | __owur EVP_MD_CTX *ssl_replace_hash(EVP_MD_CTX **hash, const EVP_MD *md); | 
|  | void ssl_clear_hash_ctx(EVP_MD_CTX **hash); | 
|  | __owur int ssl_add_serverhello_renegotiate_ext(SSL *s, unsigned char *p, int *len, | 
|  | int maxlen); | 
|  | __owur int ssl_parse_serverhello_renegotiate_ext(SSL *s, PACKET *pkt, | 
|  | int *al); | 
|  | __owur int ssl_add_clienthello_renegotiate_ext(SSL *s, unsigned char *p, int *len, | 
|  | int maxlen); | 
|  | __owur int ssl_parse_clienthello_renegotiate_ext(SSL *s, PACKET *pkt, int *al); | 
|  | __owur long ssl_get_algorithm2(SSL *s); | 
|  | __owur size_t tls12_copy_sigalgs(SSL *s, unsigned char *out, | 
|  | const unsigned char *psig, size_t psiglen); | 
|  | __owur int tls1_save_sigalgs(SSL *s, const unsigned char *data, int dsize); | 
|  | __owur int tls1_process_sigalgs(SSL *s); | 
|  | __owur size_t tls12_get_psigalgs(SSL *s, const unsigned char **psigs); | 
|  | __owur int tls12_check_peer_sigalg(const EVP_MD **pmd, SSL *s, | 
|  | const unsigned char *sig, EVP_PKEY *pkey); | 
|  | void ssl_set_client_disabled(SSL *s); | 
|  | __owur int ssl_cipher_disabled(SSL *s, const SSL_CIPHER *c, int op); | 
|  |  | 
|  | __owur int ssl_add_clienthello_use_srtp_ext(SSL *s, unsigned char *p, int *len, | 
|  | int maxlen); | 
|  | __owur int ssl_parse_clienthello_use_srtp_ext(SSL *s, PACKET *pkt, int *al); | 
|  | __owur int ssl_add_serverhello_use_srtp_ext(SSL *s, unsigned char *p, int *len, | 
|  | int maxlen); | 
|  | __owur int ssl_parse_serverhello_use_srtp_ext(SSL *s, PACKET *pkt, int *al); | 
|  |  | 
|  | __owur int ssl_handshake_hash(SSL *s, unsigned char *out, int outlen); | 
|  |  | 
|  | /* s3_cbc.c */ | 
|  | __owur char ssl3_cbc_record_digest_supported(const EVP_MD_CTX *ctx); | 
|  | void ssl3_cbc_digest_record(const EVP_MD_CTX *ctx, | 
|  | unsigned char *md_out, | 
|  | size_t *md_out_size, | 
|  | const unsigned char header[13], | 
|  | const unsigned char *data, | 
|  | size_t data_plus_mac_size, | 
|  | size_t data_plus_mac_plus_padding_size, | 
|  | const unsigned char *mac_secret, | 
|  | unsigned mac_secret_length, char is_sslv3); | 
|  |  | 
|  | void tls_fips_digest_extra(const EVP_CIPHER_CTX *cipher_ctx, | 
|  | EVP_MD_CTX *mac_ctx, const unsigned char *data, | 
|  | size_t data_len, size_t orig_len); | 
|  |  | 
|  | __owur int srp_generate_server_master_secret(SSL *s); | 
|  | __owur int srp_generate_client_master_secret(SSL *s); | 
|  | __owur int srp_verify_server_param(SSL *s, int *al); | 
|  |  | 
|  | /* t1_ext.c */ | 
|  |  | 
|  | void custom_ext_init(custom_ext_methods *meths); | 
|  |  | 
|  | __owur int custom_ext_parse(SSL *s, int server, | 
|  | unsigned int ext_type, | 
|  | const unsigned char *ext_data, size_t ext_size, int *al); | 
|  | __owur int custom_ext_add(SSL *s, int server, | 
|  | unsigned char **pret, unsigned char *limit, int *al); | 
|  |  | 
|  | __owur int custom_exts_copy(custom_ext_methods *dst, const custom_ext_methods *src); | 
|  | void custom_exts_free(custom_ext_methods *exts); | 
|  |  | 
|  | # else | 
|  |  | 
|  | #  define ssl_init_wbio_buffer SSL_test_functions()->p_ssl_init_wbio_buffer | 
|  | #  define ssl3_setup_buffers SSL_test_functions()->p_ssl3_setup_buffers | 
|  | #  define tls1_process_heartbeat SSL_test_functions()->p_tls1_process_heartbeat | 
|  | #  define dtls1_process_heartbeat SSL_test_functions()->p_dtls1_process_heartbeat | 
|  |  | 
|  | # endif | 
|  | #endif |