|  | /* | 
|  | * Copyright 2016 The OpenSSL Project Authors. All Rights Reserved. | 
|  | * | 
|  | * Licensed under the OpenSSL license (the "License").  You may not use | 
|  | * this file except in compliance with the License.  You can obtain a copy | 
|  | * in the file LICENSE in the source distribution or at | 
|  | * https://www.openssl.org/source/license.html | 
|  | */ | 
|  |  | 
|  | #include <internal/cryptlib_int.h> | 
|  | #include <openssl/err.h> | 
|  | #include <internal/rand.h> | 
|  | #include <internal/bio.h> | 
|  | #include <openssl/evp.h> | 
|  | #include <internal/evp_int.h> | 
|  | #include <internal/conf.h> | 
|  | #include <internal/async.h> | 
|  | #include <internal/engine.h> | 
|  | #include <internal/comp.h> | 
|  | #include <internal/err.h> | 
|  | #include <internal/err_int.h> | 
|  | #include <internal/objects.h> | 
|  | #include <stdlib.h> | 
|  | #include <assert.h> | 
|  | #include <internal/thread_once.h> | 
|  | #include <internal/dso.h> | 
|  |  | 
|  | static int stopped = 0; | 
|  |  | 
|  | static void ossl_init_thread_stop(struct thread_local_inits_st *locals); | 
|  |  | 
|  | static CRYPTO_THREAD_LOCAL threadstopkey; | 
|  |  | 
|  | static void ossl_init_thread_stop_wrap(void *local) | 
|  | { | 
|  | ossl_init_thread_stop((struct thread_local_inits_st *)local); | 
|  | } | 
|  |  | 
|  | static struct thread_local_inits_st *ossl_init_get_thread_local(int alloc) | 
|  | { | 
|  | struct thread_local_inits_st *local = | 
|  | CRYPTO_THREAD_get_local(&threadstopkey); | 
|  |  | 
|  | if (local == NULL && alloc) { | 
|  | local = OPENSSL_zalloc(sizeof *local); | 
|  | CRYPTO_THREAD_set_local(&threadstopkey, local); | 
|  | } | 
|  | if (!alloc) { | 
|  | CRYPTO_THREAD_set_local(&threadstopkey, NULL); | 
|  | } | 
|  |  | 
|  | return local; | 
|  | } | 
|  |  | 
|  | typedef struct ossl_init_stop_st OPENSSL_INIT_STOP; | 
|  | struct ossl_init_stop_st { | 
|  | void (*handler)(void); | 
|  | OPENSSL_INIT_STOP *next; | 
|  | }; | 
|  |  | 
|  | static OPENSSL_INIT_STOP *stop_handlers = NULL; | 
|  | static CRYPTO_RWLOCK *init_lock = NULL; | 
|  |  | 
|  | static CRYPTO_ONCE base = CRYPTO_ONCE_STATIC_INIT; | 
|  | static int base_inited = 0; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_base) | 
|  | { | 
|  | #ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_base: Setting up stop handlers\n"); | 
|  | #endif | 
|  | #ifndef OPENSSL_NO_CRYPTO_MDEBUG | 
|  | ossl_malloc_setup_failures(); | 
|  | #endif | 
|  | /* | 
|  | * We use a dummy thread local key here. We use the destructor to detect | 
|  | * when the thread is going to stop (where that feature is available) | 
|  | */ | 
|  | CRYPTO_THREAD_init_local(&threadstopkey, ossl_init_thread_stop_wrap); | 
|  | #ifndef OPENSSL_SYS_UEFI | 
|  | atexit(OPENSSL_cleanup); | 
|  | #endif | 
|  | if ((init_lock = CRYPTO_THREAD_lock_new()) == NULL) | 
|  | return 0; | 
|  | OPENSSL_cpuid_setup(); | 
|  |  | 
|  | /* | 
|  | * BIG FAT WARNING! | 
|  | * Everything needed to be initialized in this function before threads | 
|  | * come along MUST happen before base_inited is set to 1, or we will | 
|  | * see race conditions. | 
|  | */ | 
|  | base_inited = 1; | 
|  |  | 
|  | #if !defined(OPENSSL_NO_DSO) && !defined(OPENSSL_USE_NODELETE) | 
|  | # ifdef DSO_WIN32 | 
|  | { | 
|  | HMODULE handle = NULL; | 
|  | BOOL ret; | 
|  |  | 
|  | /* We don't use the DSO route for WIN32 because there is a better way */ | 
|  | ret = GetModuleHandleEx(GET_MODULE_HANDLE_EX_FLAG_FROM_ADDRESS | 
|  | | GET_MODULE_HANDLE_EX_FLAG_PIN, | 
|  | (void *)&base_inited, &handle); | 
|  |  | 
|  | return (ret == TRUE) ? 1 : 0; | 
|  | } | 
|  | # else | 
|  | /* | 
|  | * Deliberately leak a reference to ourselves. This will force the library | 
|  | * to remain loaded until the atexit() handler is run a process exit. | 
|  | */ | 
|  | { | 
|  | DSO *dso = NULL; | 
|  |  | 
|  | dso = DSO_dsobyaddr(&base_inited, DSO_FLAG_NO_UNLOAD_ON_FREE); | 
|  | DSO_free(dso); | 
|  | } | 
|  | # endif | 
|  | #endif | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static CRYPTO_ONCE load_crypto_strings = CRYPTO_ONCE_STATIC_INIT; | 
|  | static int load_crypto_strings_inited = 0; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_no_load_crypto_strings) | 
|  | { | 
|  | /* Do nothing in this case */ | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_load_crypto_strings) | 
|  | { | 
|  | int ret = 1; | 
|  | /* | 
|  | * OPENSSL_NO_AUTOERRINIT is provided here to prevent at compile time | 
|  | * pulling in all the error strings during static linking | 
|  | */ | 
|  | #if !defined(OPENSSL_NO_ERR) && !defined(OPENSSL_NO_AUTOERRINIT) | 
|  | # ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_load_crypto_strings: " | 
|  | "err_load_crypto_strings_int()\n"); | 
|  | # endif | 
|  | ret = err_load_crypto_strings_int(); | 
|  | load_crypto_strings_inited = 1; | 
|  | #endif | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static CRYPTO_ONCE add_all_ciphers = CRYPTO_ONCE_STATIC_INIT; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_add_all_ciphers) | 
|  | { | 
|  | /* | 
|  | * OPENSSL_NO_AUTOALGINIT is provided here to prevent at compile time | 
|  | * pulling in all the ciphers during static linking | 
|  | */ | 
|  | #ifndef OPENSSL_NO_AUTOALGINIT | 
|  | # ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_add_all_ciphers: " | 
|  | "openssl_add_all_ciphers_int()\n"); | 
|  | # endif | 
|  | openssl_add_all_ciphers_int(); | 
|  | #endif | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static CRYPTO_ONCE add_all_digests = CRYPTO_ONCE_STATIC_INIT; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_add_all_digests) | 
|  | { | 
|  | /* | 
|  | * OPENSSL_NO_AUTOALGINIT is provided here to prevent at compile time | 
|  | * pulling in all the ciphers during static linking | 
|  | */ | 
|  | #ifndef OPENSSL_NO_AUTOALGINIT | 
|  | # ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_add_all_digests: " | 
|  | "openssl_add_all_digests()\n"); | 
|  | # endif | 
|  | openssl_add_all_digests_int(); | 
|  | #endif | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_no_add_algs) | 
|  | { | 
|  | /* Do nothing */ | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static CRYPTO_ONCE config = CRYPTO_ONCE_STATIC_INIT; | 
|  | static int config_inited = 0; | 
|  | static const char *appname; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_config) | 
|  | { | 
|  | #ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, | 
|  | "OPENSSL_INIT: ossl_init_config: openssl_config(%s)\n", | 
|  | appname == NULL ? "NULL" : appname); | 
|  | #endif | 
|  | openssl_config_int(appname); | 
|  | config_inited = 1; | 
|  | return 1; | 
|  | } | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_no_config) | 
|  | { | 
|  | #ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, | 
|  | "OPENSSL_INIT: ossl_init_config: openssl_no_config_int()\n"); | 
|  | #endif | 
|  | openssl_no_config_int(); | 
|  | config_inited = 1; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static CRYPTO_ONCE async = CRYPTO_ONCE_STATIC_INIT; | 
|  | static int async_inited = 0; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_async) | 
|  | { | 
|  | #ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_async: async_init()\n"); | 
|  | #endif | 
|  | if (!async_init()) | 
|  | return 0; | 
|  | async_inited = 1; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | #ifndef OPENSSL_NO_ENGINE | 
|  | static CRYPTO_ONCE engine_openssl = CRYPTO_ONCE_STATIC_INIT; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_engine_openssl) | 
|  | { | 
|  | # ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_openssl: " | 
|  | "engine_load_openssl_int()\n"); | 
|  | # endif | 
|  | engine_load_openssl_int(); | 
|  | return 1; | 
|  | } | 
|  | # if !defined(OPENSSL_NO_HW) && \ | 
|  | (defined(__OpenBSD__) || defined(__FreeBSD__) || defined(__DragonFly__) || defined(HAVE_CRYPTODEV)) | 
|  | static CRYPTO_ONCE engine_cryptodev = CRYPTO_ONCE_STATIC_INIT; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_engine_cryptodev) | 
|  | { | 
|  | #  ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_cryptodev: " | 
|  | "engine_load_cryptodev_int()\n"); | 
|  | #  endif | 
|  | engine_load_cryptodev_int(); | 
|  | return 1; | 
|  | } | 
|  | # endif | 
|  |  | 
|  | # ifndef OPENSSL_NO_RDRAND | 
|  | static CRYPTO_ONCE engine_rdrand = CRYPTO_ONCE_STATIC_INIT; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_engine_rdrand) | 
|  | { | 
|  | #  ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_rdrand: " | 
|  | "engine_load_rdrand_int()\n"); | 
|  | #  endif | 
|  | engine_load_rdrand_int(); | 
|  | return 1; | 
|  | } | 
|  | # endif | 
|  | static CRYPTO_ONCE engine_dynamic = CRYPTO_ONCE_STATIC_INIT; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_engine_dynamic) | 
|  | { | 
|  | # ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_dynamic: " | 
|  | "engine_load_dynamic_int()\n"); | 
|  | # endif | 
|  | engine_load_dynamic_int(); | 
|  | return 1; | 
|  | } | 
|  | # ifndef OPENSSL_NO_STATIC_ENGINE | 
|  | #  if !defined(OPENSSL_NO_HW) && !defined(OPENSSL_NO_HW_PADLOCK) | 
|  | static CRYPTO_ONCE engine_padlock = CRYPTO_ONCE_STATIC_INIT; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_engine_padlock) | 
|  | { | 
|  | #   ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_padlock: " | 
|  | "engine_load_padlock_int()\n"); | 
|  | #   endif | 
|  | engine_load_padlock_int(); | 
|  | return 1; | 
|  | } | 
|  | #  endif | 
|  | #  if defined(OPENSSL_SYS_WIN32) && !defined(OPENSSL_NO_CAPIENG) | 
|  | static CRYPTO_ONCE engine_capi = CRYPTO_ONCE_STATIC_INIT; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_engine_capi) | 
|  | { | 
|  | #   ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_capi: " | 
|  | "engine_load_capi_int()\n"); | 
|  | #   endif | 
|  | engine_load_capi_int(); | 
|  | return 1; | 
|  | } | 
|  | #  endif | 
|  | #  if !defined(OPENSSL_NO_AFALGENG) | 
|  | static CRYPTO_ONCE engine_afalg = CRYPTO_ONCE_STATIC_INIT; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_engine_afalg) | 
|  | { | 
|  | #   ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_afalg: " | 
|  | "engine_load_afalg_int()\n"); | 
|  | #   endif | 
|  | engine_load_afalg_int(); | 
|  | return 1; | 
|  | } | 
|  | #  endif | 
|  | # endif | 
|  | #endif | 
|  |  | 
|  | #ifndef OPENSSL_NO_COMP | 
|  | static CRYPTO_ONCE zlib = CRYPTO_ONCE_STATIC_INIT; | 
|  |  | 
|  | static int zlib_inited = 0; | 
|  | DEFINE_RUN_ONCE_STATIC(ossl_init_zlib) | 
|  | { | 
|  | /* Do nothing - we need to know about this for the later cleanup */ | 
|  | zlib_inited = 1; | 
|  | return 1; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void ossl_init_thread_stop(struct thread_local_inits_st *locals) | 
|  | { | 
|  | /* Can't do much about this */ | 
|  | if (locals == NULL) | 
|  | return; | 
|  |  | 
|  | if (locals->async) { | 
|  | #ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_thread_stop: " | 
|  | "ASYNC_cleanup_thread()\n"); | 
|  | #endif | 
|  | ASYNC_cleanup_thread(); | 
|  | } | 
|  |  | 
|  | if (locals->err_state) { | 
|  | #ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_thread_stop: " | 
|  | "err_delete_thread_state()\n"); | 
|  | #endif | 
|  | err_delete_thread_state(); | 
|  | } | 
|  |  | 
|  | OPENSSL_free(locals); | 
|  | } | 
|  |  | 
|  | void OPENSSL_thread_stop(void) | 
|  | { | 
|  | ossl_init_thread_stop( | 
|  | (struct thread_local_inits_st *)ossl_init_get_thread_local(0)); | 
|  | } | 
|  |  | 
|  | int ossl_init_thread_start(uint64_t opts) | 
|  | { | 
|  | struct thread_local_inits_st *locals = ossl_init_get_thread_local(1); | 
|  |  | 
|  | if (locals == NULL) | 
|  | return 0; | 
|  |  | 
|  | if (opts & OPENSSL_INIT_THREAD_ASYNC) { | 
|  | #ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_thread_start: " | 
|  | "marking thread for async\n"); | 
|  | #endif | 
|  | locals->async = 1; | 
|  | } | 
|  |  | 
|  | if (opts & OPENSSL_INIT_THREAD_ERR_STATE) { | 
|  | #ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: ossl_init_thread_start: " | 
|  | "marking thread for err_state\n"); | 
|  | #endif | 
|  | locals->err_state = 1; | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | void OPENSSL_cleanup(void) | 
|  | { | 
|  | OPENSSL_INIT_STOP *currhandler, *lasthandler; | 
|  |  | 
|  | /* If we've not been inited then no need to deinit */ | 
|  | if (!base_inited) | 
|  | return; | 
|  |  | 
|  | /* Might be explicitly called and also by atexit */ | 
|  | if (stopped) | 
|  | return; | 
|  | stopped = 1; | 
|  |  | 
|  | /* | 
|  | * Thread stop may not get automatically called by the thread library for | 
|  | * the very last thread in some situations, so call it directly. | 
|  | */ | 
|  | ossl_init_thread_stop(ossl_init_get_thread_local(0)); | 
|  |  | 
|  | currhandler = stop_handlers; | 
|  | while (currhandler != NULL) { | 
|  | currhandler->handler(); | 
|  | lasthandler = currhandler; | 
|  | currhandler = currhandler->next; | 
|  | OPENSSL_free(lasthandler); | 
|  | } | 
|  | stop_handlers = NULL; | 
|  |  | 
|  | CRYPTO_THREAD_lock_free(init_lock); | 
|  |  | 
|  | /* | 
|  | * We assume we are single-threaded for this function, i.e. no race | 
|  | * conditions for the various "*_inited" vars below. | 
|  | */ | 
|  |  | 
|  | #ifndef OPENSSL_NO_COMP | 
|  | if (zlib_inited) { | 
|  | #ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " | 
|  | "comp_zlib_cleanup_int()\n"); | 
|  | #endif | 
|  | comp_zlib_cleanup_int(); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (async_inited) { | 
|  | # ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " | 
|  | "async_deinit()\n"); | 
|  | # endif | 
|  | async_deinit(); | 
|  | } | 
|  |  | 
|  | if (load_crypto_strings_inited) { | 
|  | #ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " | 
|  | "err_free_strings_int()\n"); | 
|  | #endif | 
|  | err_free_strings_int(); | 
|  | } | 
|  |  | 
|  | CRYPTO_THREAD_cleanup_local(&threadstopkey); | 
|  |  | 
|  | #ifdef OPENSSL_INIT_DEBUG | 
|  | fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " | 
|  | "rand_cleanup_int()\n"); | 
|  | fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " | 
|  | "conf_modules_free_int()\n"); | 
|  | #ifndef OPENSSL_NO_ENGINE | 
|  | fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " | 
|  | "engine_cleanup_int()\n"); | 
|  | #endif | 
|  | fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " | 
|  | "crypto_cleanup_all_ex_data_int()\n"); | 
|  | fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " | 
|  | "bio_sock_cleanup_int()\n"); | 
|  | fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " | 
|  | "bio_cleanup()\n"); | 
|  | fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " | 
|  | "evp_cleanup_int()\n"); | 
|  | fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " | 
|  | "obj_cleanup_int()\n"); | 
|  | fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " | 
|  | "err_cleanup()\n"); | 
|  | #endif | 
|  | /* | 
|  | * Note that cleanup order is important: | 
|  | * - rand_cleanup_int could call an ENGINE's RAND cleanup function so | 
|  | * must be called before engine_cleanup_int() | 
|  | * - ENGINEs use CRYPTO_EX_DATA and therefore, must be cleaned up | 
|  | * before the ex data handlers are wiped in CRYPTO_cleanup_all_ex_data(). | 
|  | * - conf_modules_free_int() can end up in ENGINE code so must be called | 
|  | * before engine_cleanup_int() | 
|  | * - ENGINEs and additional EVP algorithms might use added OIDs names so | 
|  | * obj_cleanup_int() must be called last | 
|  | */ | 
|  | rand_cleanup_int(); | 
|  | conf_modules_free_int(); | 
|  | #ifndef OPENSSL_NO_ENGINE | 
|  | engine_cleanup_int(); | 
|  | #endif | 
|  | crypto_cleanup_all_ex_data_int(); | 
|  | bio_cleanup(); | 
|  | evp_cleanup_int(); | 
|  | obj_cleanup_int(); | 
|  | err_cleanup(); | 
|  |  | 
|  | base_inited = 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If this function is called with a non NULL settings value then it must be | 
|  | * called prior to any threads making calls to any OpenSSL functions, | 
|  | * i.e. passing a non-null settings value is assumed to be single-threaded. | 
|  | */ | 
|  | int OPENSSL_init_crypto(uint64_t opts, const OPENSSL_INIT_SETTINGS *settings) | 
|  | { | 
|  | static int stoperrset = 0; | 
|  |  | 
|  | if (stopped) { | 
|  | if (!stoperrset) { | 
|  | /* | 
|  | * We only ever set this once to avoid getting into an infinite | 
|  | * loop where the error system keeps trying to init and fails so | 
|  | * sets an error etc | 
|  | */ | 
|  | stoperrset = 1; | 
|  | CRYPTOerr(CRYPTO_F_OPENSSL_INIT_CRYPTO, ERR_R_INIT_FAIL); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (!base_inited && !RUN_ONCE(&base, ossl_init_base)) | 
|  | return 0; | 
|  |  | 
|  | if ((opts & OPENSSL_INIT_NO_LOAD_CRYPTO_STRINGS) | 
|  | && !RUN_ONCE(&load_crypto_strings, | 
|  | ossl_init_no_load_crypto_strings)) | 
|  | return 0; | 
|  |  | 
|  | if ((opts & OPENSSL_INIT_LOAD_CRYPTO_STRINGS) | 
|  | && !RUN_ONCE(&load_crypto_strings, ossl_init_load_crypto_strings)) | 
|  | return 0; | 
|  |  | 
|  | if ((opts & OPENSSL_INIT_NO_ADD_ALL_CIPHERS) | 
|  | && !RUN_ONCE(&add_all_ciphers, ossl_init_no_add_algs)) | 
|  | return 0; | 
|  |  | 
|  | if ((opts & OPENSSL_INIT_ADD_ALL_CIPHERS) | 
|  | && !RUN_ONCE(&add_all_ciphers, ossl_init_add_all_ciphers)) | 
|  | return 0; | 
|  |  | 
|  | if ((opts & OPENSSL_INIT_NO_ADD_ALL_DIGESTS) | 
|  | && !RUN_ONCE(&add_all_digests, ossl_init_no_add_algs)) | 
|  | return 0; | 
|  |  | 
|  | if ((opts & OPENSSL_INIT_ADD_ALL_DIGESTS) | 
|  | && !RUN_ONCE(&add_all_digests, ossl_init_add_all_digests)) | 
|  | return 0; | 
|  |  | 
|  | if ((opts & OPENSSL_INIT_NO_LOAD_CONFIG) | 
|  | && !RUN_ONCE(&config, ossl_init_no_config)) | 
|  | return 0; | 
|  |  | 
|  | if (opts & OPENSSL_INIT_LOAD_CONFIG) { | 
|  | int ret; | 
|  | CRYPTO_THREAD_write_lock(init_lock); | 
|  | appname = (settings == NULL) ? NULL : settings->appname; | 
|  | ret = RUN_ONCE(&config, ossl_init_config); | 
|  | CRYPTO_THREAD_unlock(init_lock); | 
|  | if (!ret) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if ((opts & OPENSSL_INIT_ASYNC) | 
|  | && !RUN_ONCE(&async, ossl_init_async)) | 
|  | return 0; | 
|  |  | 
|  | #ifndef OPENSSL_NO_ENGINE | 
|  | if ((opts & OPENSSL_INIT_ENGINE_OPENSSL) | 
|  | && !RUN_ONCE(&engine_openssl, ossl_init_engine_openssl)) | 
|  | return 0; | 
|  | # if !defined(OPENSSL_NO_HW) && \ | 
|  | (defined(__OpenBSD__) || defined(__FreeBSD__) || defined(__DragonFly__) || defined(HAVE_CRYPTODEV)) | 
|  | if ((opts & OPENSSL_INIT_ENGINE_CRYPTODEV) | 
|  | && !RUN_ONCE(&engine_cryptodev, ossl_init_engine_cryptodev)) | 
|  | return 0; | 
|  | # endif | 
|  | # ifndef OPENSSL_NO_RDRAND | 
|  | if ((opts & OPENSSL_INIT_ENGINE_RDRAND) | 
|  | && !RUN_ONCE(&engine_rdrand, ossl_init_engine_rdrand)) | 
|  | return 0; | 
|  | # endif | 
|  | if ((opts & OPENSSL_INIT_ENGINE_DYNAMIC) | 
|  | && !RUN_ONCE(&engine_dynamic, ossl_init_engine_dynamic)) | 
|  | return 0; | 
|  | # ifndef OPENSSL_NO_STATIC_ENGINE | 
|  | #  if !defined(OPENSSL_NO_HW) && !defined(OPENSSL_NO_HW_PADLOCK) | 
|  | if ((opts & OPENSSL_INIT_ENGINE_PADLOCK) | 
|  | && !RUN_ONCE(&engine_padlock, ossl_init_engine_padlock)) | 
|  | return 0; | 
|  | #  endif | 
|  | #  if defined(OPENSSL_SYS_WIN32) && !defined(OPENSSL_NO_CAPIENG) | 
|  | if ((opts & OPENSSL_INIT_ENGINE_CAPI) | 
|  | && !RUN_ONCE(&engine_capi, ossl_init_engine_capi)) | 
|  | return 0; | 
|  | #  endif | 
|  | #  if !defined(OPENSSL_NO_AFALGENG) | 
|  | if ((opts & OPENSSL_INIT_ENGINE_AFALG) | 
|  | && !RUN_ONCE(&engine_afalg, ossl_init_engine_afalg)) | 
|  | return 0; | 
|  | #  endif | 
|  | # endif | 
|  | if (opts & (OPENSSL_INIT_ENGINE_ALL_BUILTIN | 
|  | | OPENSSL_INIT_ENGINE_OPENSSL | 
|  | | OPENSSL_INIT_ENGINE_AFALG)) { | 
|  | ENGINE_register_all_complete(); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifndef OPENSSL_NO_COMP | 
|  | if ((opts & OPENSSL_INIT_ZLIB) | 
|  | && !RUN_ONCE(&zlib, ossl_init_zlib)) | 
|  | return 0; | 
|  | #endif | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | int OPENSSL_atexit(void (*handler)(void)) | 
|  | { | 
|  | OPENSSL_INIT_STOP *newhand; | 
|  |  | 
|  | #if !defined(OPENSSL_NO_DSO) && !defined(OPENSSL_USE_NODELETE) | 
|  | { | 
|  | union { | 
|  | void *sym; | 
|  | void (*func)(void); | 
|  | } handlersym; | 
|  |  | 
|  | handlersym.func = handler; | 
|  | # ifdef DSO_WIN32 | 
|  | { | 
|  | HMODULE handle = NULL; | 
|  | BOOL ret; | 
|  |  | 
|  | /* | 
|  | * We don't use the DSO route for WIN32 because there is a better | 
|  | * way | 
|  | */ | 
|  | ret = GetModuleHandleEx(GET_MODULE_HANDLE_EX_FLAG_FROM_ADDRESS | 
|  | | GET_MODULE_HANDLE_EX_FLAG_PIN, | 
|  | handlersym.sym, &handle); | 
|  |  | 
|  | if (!ret) | 
|  | return 0; | 
|  | } | 
|  | # else | 
|  | /* | 
|  | * Deliberately leak a reference to the handler. This will force the | 
|  | * library/code containing the handler to remain loaded until we run the | 
|  | * atexit handler. If -znodelete has been used then this is | 
|  | * unneccessary. | 
|  | */ | 
|  | { | 
|  | DSO *dso = NULL; | 
|  |  | 
|  | dso = DSO_dsobyaddr(handlersym.sym, DSO_FLAG_NO_UNLOAD_ON_FREE); | 
|  | DSO_free(dso); | 
|  | } | 
|  | # endif | 
|  | } | 
|  | #endif | 
|  |  | 
|  | newhand = OPENSSL_malloc(sizeof(*newhand)); | 
|  | if (newhand == NULL) | 
|  | return 0; | 
|  |  | 
|  | newhand->handler = handler; | 
|  | newhand->next = stop_handlers; | 
|  | stop_handlers = newhand; | 
|  |  | 
|  | return 1; | 
|  | } |