test/recipes/70-test_sslsigalgs.t - third_party/openssl - Git at Google

 #! /usr/bin/env perl
 # Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
 #
 # Licensed under the OpenSSL license (the "License").  You may not use
 # this file except in compliance with the License.  You can obtain a copy
 # in the file LICENSE in the source distribution or at
 # https://www.openssl.org/source/license.html

 use strict;
 use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file bldtop_dir/;
 use OpenSSL::Test::Utils;
 use TLSProxy::Proxy;

 my $test_name = "test_sslsigalgs";
 setup($test_name);

 plan skip_all => "TLSProxy isn't usable on $^O"
     if $^O =~ /^(VMS|MSWin32)$/;

 plan skip_all => "$test_name needs the dynamic engine feature enabled"
     if disabled("engine") || disabled("dynamic-engine");

 plan skip_all => "$test_name needs the sock feature enabled"
     if disabled("sock");

 plan skip_all => "$test_name needs TLS1.2 or TLS1.3 enabled"
     if disabled("tls1_2") && disabled("tls1_3");

 $ENV{OPENSSL_ia32cap} = '~0x200000200000000';
 my $proxy = TLSProxy::Proxy->new(
     undef,
     cmdstr(app(["openssl"]), display => 1),
     srctop_file("apps", "server.pem"),
     (!$ENV{HARNESS_ACTIVE} || $ENV{HARNESS_VERBOSE})
 );

 use constant {
     NO_SIG_ALGS_EXT => 0,
     EMPTY_SIG_ALGS_EXT => 1,
     NO_KNOWN_SIG_ALGS => 2,
     NO_PSS_SIG_ALGS => 3,
     PSS_ONLY_SIG_ALGS => 4
 };

 #Note: Throughout this test we override the default ciphersuites where TLSv1.2
 #      is expected to ensure that a ServerKeyExchange message is sent that uses
 #      the sigalgs

 #Test 1: Default sig algs should succeed
 $proxy->start() or plan skip_all => "Unable to start up Proxy for tests";
 plan tests => 16;
 ok(TLSProxy::Message->success, "Default sigalgs");
 my $testtype;

 SKIP: {
     skip "TLSv1.3 disabled", 5 if disabled("tls1_3");

     $proxy->filter(\&sigalgs_filter);

     #Test 2: Sending no sig algs extension in TLSv1.3 should fail
     $proxy->clear();
     $testtype = NO_SIG_ALGS_EXT;
     $proxy->start();
     ok(TLSProxy::Message->fail, "No TLSv1.3 sigalgs");

     #Test 3: Sending an empty sig algs extension in TLSv1.3 should fail
     $proxy->clear();
     $testtype = EMPTY_SIG_ALGS_EXT;
     $proxy->start();
     ok(TLSProxy::Message->fail, "Empty TLSv1.3 sigalgs");

     #Test 4: Sending a list with no recognised sig algs in TLSv1.3 should fail
     $proxy->clear();
     $testtype = NO_KNOWN_SIG_ALGS;
     $proxy->start();
     ok(TLSProxy::Message->fail, "No known TLSv1.3 sigalgs");

     #Test 5: Sending a sig algs list without pss for an RSA cert in TLSv1.3
     #        should fail
     $proxy->clear();
     $testtype = NO_PSS_SIG_ALGS;
     $proxy->start();
     ok(TLSProxy::Message->fail, "No PSS TLSv1.3 sigalgs");

     #Test 6: Sending only TLSv1.3 PSS sig algs in TLSv1.3 should succeed
     #TODO(TLS1.3): Do we need to verify the cert to make sure its a PSS only
     #cert in this case?
     $proxy->clear();
     $testtype = PSS_ONLY_SIG_ALGS;
     $proxy->start();
     ok(TLSProxy::Message->success, "PSS only sigalgs in TLSv1.3");
 }

 SKIP: {
     skip "EC, TLSv1.3 or TLSv1.2 disabled", 2
         if disabled("tls1_2") || disabled("tls1_3") || disabled("ec");

     #Test 7: Sending a valid sig algs list but not including a sig type that
     #        matches the certificate should fail in TLSv1.3. We need TLSv1.2
     #        enabled for this test - otherwise the client will not attempt to
     #        connect due to no TLSv1.3 ciphers being available.
     #        TODO(TLS1.3): When proper TLSv1.3 certificate selection is working
     #        we can move this test into the section above
     $proxy->clear();
     $proxy->clientflags("-sigalgs ECDSA+SHA256");
     $proxy->filter(undef);
     $proxy->start();
     ok(TLSProxy::Message->fail, "No matching TLSv1.3 sigalgs");

     #Test 8: Sending a full list of TLSv1.3 sig algs but negotiating TLSv1.2
     #        should succeed
     $proxy->clear();
     $proxy->serverflags("-no_tls1_3");
     $proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
     $proxy->filter(undef);
     $proxy->start();
     ok(TLSProxy::Message->success, "TLSv1.3 client TLSv1.2 server");
 }

 SKIP: {
     skip "EC or TLSv1.2 disabled", 8 if disabled("tls1_2") || disabled("ec");

     $proxy->filter(\&sigalgs_filter);

     #Test 9: Sending no sig algs extension in TLSv1.2 should succeed
     $proxy->clear();
     $testtype = NO_SIG_ALGS_EXT;
     $proxy->clientflags("-no_tls1_3");
     $proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
     $proxy->start();
     ok(TLSProxy::Message->success, "No TLSv1.2 sigalgs");

     #Test 10: Sending an empty sig algs extension in TLSv1.2 should fail
     $proxy->clear();
     $testtype = EMPTY_SIG_ALGS_EXT;
     $proxy->clientflags("-no_tls1_3");
     $proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
     $proxy->start();
     ok(TLSProxy::Message->fail, "Empty TLSv1.2 sigalgs");

     #Test 11: Sending a list with no recognised sig algs in TLSv1.2 should fail
     $proxy->clear();
     $testtype = NO_KNOWN_SIG_ALGS;
     $proxy->clientflags("-no_tls1_3");
     $proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
     $proxy->start();
     ok(TLSProxy::Message->fail, "No known TLSv1.3 sigalgs");

     #Test 12: Sending a sig algs list without pss for an RSA cert in TLSv1.2
     #         should succeed
     $proxy->clear();
     $testtype = NO_PSS_SIG_ALGS;
     $proxy->clientflags("-no_tls1_3");
     $proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
     $proxy->start();
     ok(TLSProxy::Message->success, "No PSS TLSv1.2 sigalgs");

     #Test 13: Sending only TLSv1.3 PSS sig algs in TLSv1.2 should succeed
     $proxy->clear();
     $testtype = PSS_ONLY_SIG_ALGS;
     $proxy->serverflags("-no_tls1_3");
     $proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
     $proxy->start();
     ok(TLSProxy::Message->success, "PSS only sigalgs in TLSv1.2");

     #Test 14: Responding with a sig alg we did not send in TLSv1.2 should fail
     #         We send rsa_pkcs1_sha256 and respond with rsa_pss_sha256
     #         TODO(TLS1.3): Add a similar test to the TLSv1.3 section above
     #         when we have an API capable of configuring the TLSv1.3 sig algs
     $proxy->clear();
     $testtype = PSS_ONLY_SIG_ALGS;
     $proxy->clientflags("-no_tls1_3 -sigalgs RSA+SHA256");
     $proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
     $proxy->start();
     ok(TLSProxy::Message->fail, "Sigalg we did not send in TLSv1.2");

     #Test 15: Sending a valid sig algs list but not including a sig type that
     #         matches the certificate should fail in TLSv1.2
     $proxy->clear();
     $proxy->clientflags("-no_tls1_3 -sigalgs ECDSA+SHA256");
     $proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
     $proxy->filter(undef);
     $proxy->start();
     ok(TLSProxy::Message->fail, "No matching TLSv1.2 sigalgs");
     $proxy->filter(\&sigalgs_filter);

     #Test 16: No sig algs extension, ECDSA cert, TLSv1.2 should succeed
     $proxy->clear();
     $testtype = NO_SIG_ALGS_EXT;
     $proxy->clientflags("-no_tls1_3");
     $proxy->serverflags("-cert " . srctop_file("test", "certs",
                                                "server-ecdsa-cert.pem") .
                         " -key " . srctop_file("test", "certs",
                                                "server-ecdsa-key.pem")),
     $proxy->ciphers("ECDHE-ECDSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
     $proxy->start();
     ok(TLSProxy::Message->success, "No TLSv1.2 sigalgs, ECDSA");
 }


 sub sigalgs_filter
 {
     my $proxy = shift;

     # We're only interested in the initial ClientHello
     if ($proxy->flight != 0) {
         return;
     }

     foreach my $message (@{$proxy->message_list}) {
         if ($message->mt == TLSProxy::Message::MT_CLIENT_HELLO) {
             if ($testtype == NO_SIG_ALGS_EXT) {
                 $message->delete_extension(TLSProxy::Message::EXT_SIG_ALGS);
             } else {
                 my $sigalg;
                 if ($testtype == EMPTY_SIG_ALGS_EXT) {
                     $sigalg = pack "C2", 0x00, 0x00;
                 } elsif ($testtype == NO_KNOWN_SIG_ALGS) {
                     $sigalg = pack "C4", 0x00, 0x02, 0xff, 0xff;
                 } elsif ($testtype == NO_PSS_SIG_ALGS) {
                     #No PSS sig algs - just send rsa_pkcs1_sha256
                     $sigalg = pack "C4", 0x00, 0x02, 0x04, 0x01;
                 } else {
                     #PSS sig algs only - just send rsa_pss_sha256
                     $sigalg = pack "C4", 0x00, 0x02, 0x08, 0x04;
                 }
                 $message->set_extension(TLSProxy::Message::EXT_SIG_ALGS, $sigalg);
             }

             $message->repack();
         }
     }
 }
	#! /usr/bin/env perl
	# Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
	#
	# Licensed under the OpenSSL license (the "License"). You may not use
	# this file except in compliance with the License. You can obtain a copy
	# in the file LICENSE in the source distribution or at
	# https://www.openssl.org/source/license.html

	use strict;
	use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file bldtop_dir/;
	use OpenSSL::Test::Utils;
	use TLSProxy::Proxy;

	my $test_name = "test_sslsigalgs";
	setup($test_name);

	plan skip_all => "TLSProxy isn't usable on $^O"
	if $^O =~ /^(VMS\|MSWin32)$/;

	plan skip_all => "$test_name needs the dynamic engine feature enabled"
	if disabled("engine") \|\| disabled("dynamic-engine");

	plan skip_all => "$test_name needs the sock feature enabled"
	if disabled("sock");

	plan skip_all => "$test_name needs TLS1.2 or TLS1.3 enabled"
	if disabled("tls1_2") && disabled("tls1_3");

	$ENV{OPENSSL_ia32cap} = '~0x200000200000000';
	my $proxy = TLSProxy::Proxy->new(
	undef,
	cmdstr(app(["openssl"]), display => 1),
	srctop_file("apps", "server.pem"),
	(!$ENV{HARNESS_ACTIVE} \|\| $ENV{HARNESS_VERBOSE})
	);

	use constant {
	NO_SIG_ALGS_EXT => 0,
	EMPTY_SIG_ALGS_EXT => 1,
	NO_KNOWN_SIG_ALGS => 2,
	NO_PSS_SIG_ALGS => 3,
	PSS_ONLY_SIG_ALGS => 4
	};

	#Note: Throughout this test we override the default ciphersuites where TLSv1.2
	# is expected to ensure that a ServerKeyExchange message is sent that uses
	# the sigalgs

	#Test 1: Default sig algs should succeed
	$proxy->start() or plan skip_all => "Unable to start up Proxy for tests";
	plan tests => 16;
	ok(TLSProxy::Message->success, "Default sigalgs");
	my $testtype;

	SKIP: {
	skip "TLSv1.3 disabled", 5 if disabled("tls1_3");

	$proxy->filter(\&sigalgs_filter);

	#Test 2: Sending no sig algs extension in TLSv1.3 should fail
	$proxy->clear();
	$testtype = NO_SIG_ALGS_EXT;
	$proxy->start();
	ok(TLSProxy::Message->fail, "No TLSv1.3 sigalgs");

	#Test 3: Sending an empty sig algs extension in TLSv1.3 should fail
	$proxy->clear();
	$testtype = EMPTY_SIG_ALGS_EXT;
	$proxy->start();
	ok(TLSProxy::Message->fail, "Empty TLSv1.3 sigalgs");

	#Test 4: Sending a list with no recognised sig algs in TLSv1.3 should fail
	$proxy->clear();
	$testtype = NO_KNOWN_SIG_ALGS;
	$proxy->start();
	ok(TLSProxy::Message->fail, "No known TLSv1.3 sigalgs");

	#Test 5: Sending a sig algs list without pss for an RSA cert in TLSv1.3
	# should fail
	$proxy->clear();
	$testtype = NO_PSS_SIG_ALGS;
	$proxy->start();
	ok(TLSProxy::Message->fail, "No PSS TLSv1.3 sigalgs");

	#Test 6: Sending only TLSv1.3 PSS sig algs in TLSv1.3 should succeed
	#TODO(TLS1.3): Do we need to verify the cert to make sure its a PSS only
	#cert in this case?
	$proxy->clear();
	$testtype = PSS_ONLY_SIG_ALGS;
	$proxy->start();
	ok(TLSProxy::Message->success, "PSS only sigalgs in TLSv1.3");
	}

	SKIP: {
	skip "EC, TLSv1.3 or TLSv1.2 disabled", 2
	if disabled("tls1_2") \|\| disabled("tls1_3") \|\| disabled("ec");

	#Test 7: Sending a valid sig algs list but not including a sig type that
	# matches the certificate should fail in TLSv1.3. We need TLSv1.2
	# enabled for this test - otherwise the client will not attempt to
	# connect due to no TLSv1.3 ciphers being available.
	# TODO(TLS1.3): When proper TLSv1.3 certificate selection is working
	# we can move this test into the section above
	$proxy->clear();
	$proxy->clientflags("-sigalgs ECDSA+SHA256");
	$proxy->filter(undef);
	$proxy->start();
	ok(TLSProxy::Message->fail, "No matching TLSv1.3 sigalgs");

	#Test 8: Sending a full list of TLSv1.3 sig algs but negotiating TLSv1.2
	# should succeed
	$proxy->clear();
	$proxy->serverflags("-no_tls1_3");
	$proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
	$proxy->filter(undef);
	$proxy->start();
	ok(TLSProxy::Message->success, "TLSv1.3 client TLSv1.2 server");
	}

	SKIP: {
	skip "EC or TLSv1.2 disabled", 8 if disabled("tls1_2") \|\| disabled("ec");

	$proxy->filter(\&sigalgs_filter);

	#Test 9: Sending no sig algs extension in TLSv1.2 should succeed
	$proxy->clear();
	$testtype = NO_SIG_ALGS_EXT;
	$proxy->clientflags("-no_tls1_3");
	$proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
	$proxy->start();
	ok(TLSProxy::Message->success, "No TLSv1.2 sigalgs");

	#Test 10: Sending an empty sig algs extension in TLSv1.2 should fail
	$proxy->clear();
	$testtype = EMPTY_SIG_ALGS_EXT;
	$proxy->clientflags("-no_tls1_3");
	$proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
	$proxy->start();
	ok(TLSProxy::Message->fail, "Empty TLSv1.2 sigalgs");

	#Test 11: Sending a list with no recognised sig algs in TLSv1.2 should fail
	$proxy->clear();
	$testtype = NO_KNOWN_SIG_ALGS;
	$proxy->clientflags("-no_tls1_3");
	$proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
	$proxy->start();
	ok(TLSProxy::Message->fail, "No known TLSv1.3 sigalgs");

	#Test 12: Sending a sig algs list without pss for an RSA cert in TLSv1.2
	# should succeed
	$proxy->clear();
	$testtype = NO_PSS_SIG_ALGS;
	$proxy->clientflags("-no_tls1_3");
	$proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
	$proxy->start();
	ok(TLSProxy::Message->success, "No PSS TLSv1.2 sigalgs");

	#Test 13: Sending only TLSv1.3 PSS sig algs in TLSv1.2 should succeed
	$proxy->clear();
	$testtype = PSS_ONLY_SIG_ALGS;
	$proxy->serverflags("-no_tls1_3");
	$proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
	$proxy->start();
	ok(TLSProxy::Message->success, "PSS only sigalgs in TLSv1.2");

	#Test 14: Responding with a sig alg we did not send in TLSv1.2 should fail
	# We send rsa_pkcs1_sha256 and respond with rsa_pss_sha256
	# TODO(TLS1.3): Add a similar test to the TLSv1.3 section above
	# when we have an API capable of configuring the TLSv1.3 sig algs
	$proxy->clear();
	$testtype = PSS_ONLY_SIG_ALGS;
	$proxy->clientflags("-no_tls1_3 -sigalgs RSA+SHA256");
	$proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
	$proxy->start();
	ok(TLSProxy::Message->fail, "Sigalg we did not send in TLSv1.2");

	#Test 15: Sending a valid sig algs list but not including a sig type that
	# matches the certificate should fail in TLSv1.2
	$proxy->clear();
	$proxy->clientflags("-no_tls1_3 -sigalgs ECDSA+SHA256");
	$proxy->ciphers("ECDHE-RSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
	$proxy->filter(undef);
	$proxy->start();
	ok(TLSProxy::Message->fail, "No matching TLSv1.2 sigalgs");
	$proxy->filter(\&sigalgs_filter);

	#Test 16: No sig algs extension, ECDSA cert, TLSv1.2 should succeed
	$proxy->clear();
	$testtype = NO_SIG_ALGS_EXT;
	$proxy->clientflags("-no_tls1_3");
	$proxy->serverflags("-cert " . srctop_file("test", "certs",
	"server-ecdsa-cert.pem") .
	" -key " . srctop_file("test", "certs",
	"server-ecdsa-key.pem")),
	$proxy->ciphers("ECDHE-ECDSA-AES128-SHA:TLS13-AES-128-GCM-SHA256");
	$proxy->start();
	ok(TLSProxy::Message->success, "No TLSv1.2 sigalgs, ECDSA");
	}



	sub sigalgs_filter
	{
	my $proxy = shift;

	# We're only interested in the initial ClientHello
	if ($proxy->flight != 0) {
	return;
	}

	foreach my $message (@{$proxy->message_list}) {
	if ($message->mt == TLSProxy::Message::MT_CLIENT_HELLO) {
	if ($testtype == NO_SIG_ALGS_EXT) {
	$message->delete_extension(TLSProxy::Message::EXT_SIG_ALGS);
	} else {
	my $sigalg;
	if ($testtype == EMPTY_SIG_ALGS_EXT) {
	$sigalg = pack "C2", 0x00, 0x00;
	} elsif ($testtype == NO_KNOWN_SIG_ALGS) {
	$sigalg = pack "C4", 0x00, 0x02, 0xff, 0xff;
	} elsif ($testtype == NO_PSS_SIG_ALGS) {
	#No PSS sig algs - just send rsa_pkcs1_sha256
	$sigalg = pack "C4", 0x00, 0x02, 0x04, 0x01;
	} else {
	#PSS sig algs only - just send rsa_pss_sha256
	$sigalg = pack "C4", 0x00, 0x02, 0x08, 0x04;
	}
	$message->set_extension(TLSProxy::Message::EXT_SIG_ALGS, $sigalg);
	}

	$message->repack();
	}
	}
	}