| ## -*- mode: perl; -*- |
| ## Standard openssl configuration targets. |
| |
| # Helper functions for the Windows configs |
| my $vc_win64a_info = {}; |
| sub vc_win64a_info { |
| unless (%$vc_win64a_info) { |
| if (`nasm -v 2>NUL` =~ /NASM version ([0-9]+\.[0-9]+)/ && $1 >= 2.0) { |
| $vc_win64a_info = { AS => "nasm", |
| ASFLAGS => "-g", |
| asflags => "-Ox -f win64 -DNEAR", |
| asoutflag => "-o " }; |
| } elsif ($disabled{asm}) { |
| # assembler is still used to compile uplink shim |
| $vc_win64a_info = { AS => "ml64", |
| ASFLAGS => "/nologo /Zi", |
| asflags => "/c /Cp /Cx", |
| asoutflag => "/Fo" }; |
| } else { |
| $die->("NASM not found - make sure it's installed and available on %PATH%\n"); |
| $vc_win64a_info = { AS => "{unknown}", |
| ASFLAGS => "", |
| asflags => "", |
| asoutflag => "" }; |
| } |
| } |
| return $vc_win64a_info; |
| } |
| |
| my $vc_win32_info = {}; |
| sub vc_win32_info { |
| unless (%$vc_win32_info) { |
| my $ver=`nasm -v 2>NUL`; |
| my $vew=`nasmw -v 2>NUL`; |
| if ($ver ne "" || $vew ne "") { |
| $vc_win32_info = { AS => $ver ge $vew ? "nasm" : "nasmw", |
| ASFLAGS => "", |
| asflags => "-f win32", |
| asoutflag => "-o ", |
| perlasm_scheme => "win32n" }; |
| } elsif ($disabled{asm}) { |
| # not actually used, uplink shim is inlined into C code |
| $vc_win32_info = { AS => "ml", |
| ASFLAGS => "/nologo /Zi", |
| asflags => "/Cp /coff /c /Cx", |
| asoutflag => "/Fo", |
| perlasm_scheme => "win32" }; |
| } else { |
| $die->("NASM not found - make sure it's installed and available on %PATH%\n"); |
| $vc_win32_info = { AS => "{unknown}", |
| ASFLAGS => "", |
| asflags => "", |
| asoutflag => "", |
| perlasm_scheme => "win32" }; |
| } |
| } |
| return $vc_win32_info; |
| } |
| |
| my $vc_wince_info = {}; |
| sub vc_wince_info { |
| unless (%$vc_wince_info) { |
| # sanity check |
| $die->('%OSVERSION% is not defined') if (!defined(env('OSVERSION'))); |
| $die->('%PLATFORM% is not defined') if (!defined(env('PLATFORM'))); |
| $die->('%TARGETCPU% is not defined') if (!defined(env('TARGETCPU'))); |
| |
| # |
| # Idea behind this is to mimic flags set by eVC++ IDE... |
| # |
| my $wcevers = env('OSVERSION'); # WCENNN |
| my $wcevernum; |
| my $wceverdotnum; |
| if ($wcevers =~ /^WCE([1-9])([0-9]{2})$/) { |
| $wcevernum = "$1$2"; |
| $wceverdotnum = "$1.$2"; |
| } else { |
| $die->('%OSVERSION% value is insane'); |
| $wcevernum = "{unknown}"; |
| $wceverdotnum = "{unknown}"; |
| } |
| my $wcecdefs = "-D_WIN32_WCE=$wcevernum -DUNDER_CE=$wcevernum"; # -D_WIN32_WCE=NNN |
| my $wcelflag = "/subsystem:windowsce,$wceverdotnum"; # ...,N.NN |
| |
| my $wceplatf = env('PLATFORM'); |
| |
| $wceplatf =~ tr/a-z0-9 /A-Z0-9_/; |
| $wcecdefs .= " -DWCE_PLATFORM_$wceplatf"; |
| |
| my $wcetgt = env('TARGETCPU'); # just shorter name... |
| SWITCH: for($wcetgt) { |
| /^X86/ && do { $wcecdefs.=" -Dx86 -D_X86_ -D_i386_ -Di_386_"; |
| $wcelflag.=" /machine:X86"; last; }; |
| /^ARMV4[IT]/ && do { $wcecdefs.=" -DARM -D_ARM_ -D$wcetgt"; |
| $wcecdefs.=" -DTHUMB -D_THUMB_" if($wcetgt=~/T$/); |
| $wcecdefs.=" -QRarch4T -QRinterwork-return"; |
| $wcelflag.=" /machine:THUMB"; last; }; |
| /^ARM/ && do { $wcecdefs.=" -DARM -D_ARM_ -D$wcetgt"; |
| $wcelflag.=" /machine:ARM"; last; }; |
| /^MIPSIV/ && do { $wcecdefs.=" -DMIPS -D_MIPS_ -DR4000 -D$wcetgt"; |
| $wcecdefs.=" -D_MIPS64 -QMmips4 -QMn32"; |
| $wcelflag.=" /machine:MIPSFPU"; last; }; |
| /^MIPS16/ && do { $wcecdefs.=" -DMIPS -D_MIPS_ -DR4000 -D$wcetgt"; |
| $wcecdefs.=" -DMIPSII -QMmips16"; |
| $wcelflag.=" /machine:MIPS16"; last; }; |
| /^MIPSII/ && do { $wcecdefs.=" -DMIPS -D_MIPS_ -DR4000 -D$wcetgt"; |
| $wcecdefs.=" -QMmips2"; |
| $wcelflag.=" /machine:MIPS"; last; }; |
| /^R4[0-9]{3}/ && do { $wcecdefs.=" -DMIPS -D_MIPS_ -DR4000"; |
| $wcelflag.=" /machine:MIPS"; last; }; |
| /^SH[0-9]/ && do { $wcecdefs.=" -D$wcetgt -D_${wcetgt}_ -DSHx"; |
| $wcecdefs.=" -Qsh4" if ($wcetgt =~ /^SH4/); |
| $wcelflag.=" /machine:$wcetgt"; last; }; |
| { $wcecdefs.=" -D$wcetgt -D_${wcetgt}_"; |
| $wcelflag.=" /machine:$wcetgt"; last; }; |
| } |
| |
| $vc_wince_info = { cppflags => $wcecdefs, |
| lflags => $wcelflag }; |
| } |
| return $vc_wince_info; |
| } |
| |
| # Helper functions for the VMS configs |
| my $vms_info = {}; |
| sub vms_info { |
| my $pointer_size_str = $config{target} =~ m|-p(\d+)$| ? $1 : ""; |
| |
| # For the case where Configure iterate through all config targets, such |
| # as when listing them and their details, we reset info if the pointer |
| # size changes. |
| if (%$vms_info && $vms_info->{pointer_size} ne $pointer_size_str) { |
| $vms_info = {}; |
| } |
| |
| unless (%$vms_info) { |
| $vms_info->{disable_warns} = [ |
| "CXXPRAGMANA", # Shut up about unknown / unsupported pragmas |
| ]; |
| $vms_info->{pointer_size} = $pointer_size_str; |
| if ($pointer_size_str eq "64") { |
| `PIPE CC /NOCROSS_REFERENCE /NOLIST /NOOBJECT /WARNINGS = DISABLE = ( MAYLOSEDATA3, EMPTYFILE ) NL: 2> NL:`; |
| if ($? == 0) { |
| push @{$vms_info->{disable_warns}}, "MAYLOSEDATA3"; |
| } |
| } |
| |
| unless ($disabled{zlib}) { |
| my $default_zlib = 'GNV$LIBZSHR' . $pointer_size_str; |
| if (defined($disabled{"zlib-dynamic"})) { |
| $vms_info->{zlib} = $withargs{zlib_lib} || "$default_zlib/SHARE"; |
| } else { |
| $vms_info->{def_zlib} = $withargs{zlib_lib} || $default_zlib; |
| # In case the --with-zlib-lib value contains something like |
| # /SHARE or /LIB or so at the end, remove it. |
| $vms_info->{def_zlib} =~ s|/.*$||g; |
| } |
| } |
| |
| if ($config{target} =~ /-ia64/) { |
| `PIPE ias -H 2> NL:`; |
| if ($? == 0) { |
| $vms_info->{AS} = "ias"; |
| $vms_info->{ASFLAGS} = '-d debug'; |
| $vms_info->{asflags} = '"-N" vms_upcase'; |
| $vms_info->{asoutflag} = "-o "; |
| $vms_info->{perlasm_scheme} = "ias"; |
| } |
| } |
| } |
| return $vms_info; |
| } |
| |
| my %targets = ( |
| |
| #### Basic configs that should work on any 32-bit box |
| "gcc" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "gcc", |
| CFLAGS => picker(debug => "-O0 -g", |
| release => "-O3"), |
| thread_scheme => "(unknown)", |
| bn_ops => "BN_LLONG", |
| }, |
| "cc" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "cc", |
| CFLAGS => "-O", |
| thread_scheme => "(unknown)", |
| }, |
| |
| #### VOS Configurations |
| "vos-gcc" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "gcc", |
| CFLAGS => picker(default => "-Wall", |
| debug => "-O0 -g", |
| release => "-O3"), |
| cppflags => "-D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES", |
| lib_cppflags => "-DB_ENDIAN", |
| thread_scheme => "(unknown)", |
| sys_id => "VOS", |
| lflags => add("-Wl,-map"), |
| bn_ops => "BN_LLONG", |
| shared_extension => ".so", |
| }, |
| |
| #### Solaris configurations |
| "solaris-common" => { |
| inherit_from => [ "BASE_unix" ], |
| template => 1, |
| lib_cppflags => "-DFILIO_H", |
| ex_libs => add("-lsocket -lnsl -ldl"), |
| dso_scheme => "dlfcn", |
| thread_scheme => "pthreads", |
| }, |
| #### Solaris common with Sun C setups |
| "solaris-common-cc" => { |
| inherit_from => [ "solaris-common" ], |
| template => 1, |
| shared_target => "solaris", |
| shared_ldflag => "-Wl,-Bsymbolic", |
| shared_defflag => "-Wl,-M,", |
| shared_sonameflag=> "-Wl,-h,", |
| }, |
| #### Solaris common with GNU C setups |
| "solaris-common-gcc" => { |
| inherit_from => [ "solaris-common" ], |
| template => 1, |
| shared_target => "solaris-gcc-shared", # The rest is on shared_info.pl |
| }, |
| #### Solaris x86 with GNU C setups |
| "solaris-x86-gcc" => { |
| # NB. GNU C has to be configured to use GNU assembler, and not |
| # /usr/ccs/bin/as. Failure to comply will result in compile |
| # failures [at least] in 32-bit build. |
| inherit_from => [ "solaris-common-gcc" ], |
| CC => "gcc", |
| CFLAGS => add_before(picker(default => "-Wall", |
| debug => "-O0 -g", |
| release => "-O3 -fomit-frame-pointer")), |
| cflags => add(threads("-pthread")), |
| lib_cppflags => add("-DL_ENDIAN"), |
| ex_libs => add(threads("-pthread")), |
| bn_ops => "BN_LLONG", |
| shared_cflag => "-fPIC", |
| shared_ldflag => add_before("-shared -static-libgcc"), |
| asm_arch => 'x86', |
| perlasm_scheme => 'elf', |
| }, |
| "solaris64-x86_64-gcc" => { |
| # -shared -static-libgcc might appear controversial, but modules |
| # taken from static libgcc do not have relocations and linking |
| # them into our shared objects doesn't have any negative side |
| # effects. On the contrary, doing so makes it possible to use |
| # gcc shared build with Sun C. Given that gcc generates faster |
| # code [thanks to inline assembler], I would actually recommend |
| # to consider using gcc shared build even with vendor compiler:-) |
| # -- <appro@openssl.org> |
| inherit_from => [ "solaris-common-gcc" ], |
| CC => "gcc", |
| CFLAGS => add_before(picker(default => "-Wall", |
| debug => "-O0 -g", |
| release => "-O3")), |
| cflags => add_before("-m64", threads("-pthread")), |
| lib_cppflags => add("-DL_ENDIAN"), |
| ex_libs => add(threads("-pthread")), |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'x86_64', |
| perlasm_scheme => "elf", |
| shared_cflag => "-fPIC", |
| shared_ldflag => add_before("-shared -static-libgcc"), |
| multilib => "/64", |
| }, |
| |
| #### Solaris x86 with Sun C setups |
| # There used to be solaris-x86-cc target, but it was removed, |
| # primarily because vendor assembler can't assemble our modules |
| # with -KPIC flag. As result it, assembly support, was not even |
| # available as option. But its lack means lack of side-channel |
| # resistant code, which is incompatible with security by today's |
| # standards. Fortunately gcc is readily available prepackaged |
| # option, which we can firmly point at... |
| # |
| # On related note, solaris64-x86_64-cc target won't compile code |
| # paths utilizing AVX and post-Haswell instruction extensions. |
| # Consider switching to solaris64-x86_64-gcc even here... |
| # |
| "solaris64-x86_64-cc" => { |
| inherit_from => [ "solaris-common-cc" ], |
| CC => "cc", |
| CFLAGS => add_before(picker(debug => "-g", |
| release => "-xO5 -xdepend -xbuiltin")), |
| cflags => add_before("-xarch=generic64 -xstrconst -Xa"), |
| cppflags => add(threads("-D_REENTRANT")), |
| lib_cppflags => add("-DL_ENDIAN"), |
| thread_scheme => "pthreads", |
| lflags => add(threads("-mt")), |
| ex_libs => add(threads("-lpthread")), |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'x86_64', |
| perlasm_scheme => "elf", |
| shared_cflag => "-KPIC", |
| shared_ldflag => add_before("-G -dy -z text"), |
| multilib => "/64", |
| }, |
| |
| #### SPARC Solaris with GNU C setups |
| "solaris-sparcv7-gcc" => { |
| inherit_from => [ "solaris-common-gcc" ], |
| CC => "gcc", |
| CFLAGS => add_before(picker(default => "-Wall", |
| debug => "-O0 -g", |
| release => "-O3")), |
| cflags => add(threads("-pthread")), |
| lib_cppflags => add("-DB_ENDIAN -DBN_DIV2W"), |
| ex_libs => add(threads("-pthread")), |
| bn_ops => "BN_LLONG RC4_CHAR", |
| shared_cflag => "-fPIC", |
| shared_ldflag => add_before("-shared"), |
| }, |
| "solaris-sparcv8-gcc" => { |
| inherit_from => [ "solaris-sparcv7-gcc" ], |
| cflags => add_before("-mcpu=v8"), |
| asm_arch => 'sparcv8', |
| perlasm_scheme => 'void', |
| }, |
| "solaris-sparcv9-gcc" => { |
| # -m32 should be safe to add as long as driver recognizes |
| # -mcpu=ultrasparc |
| inherit_from => [ "solaris-sparcv7-gcc" ], |
| cflags => add_before("-m32 -mcpu=ultrasparc"), |
| asm_arch => 'sparcv9', |
| perlasm_scheme => 'void', |
| }, |
| "solaris64-sparcv9-gcc" => { |
| inherit_from => [ "solaris-sparcv9-gcc" ], |
| cflags => sub { my $f=join(" ",@_); $f =~ s/\-m32/-m64/; $f; }, |
| bn_ops => "BN_LLONG RC4_CHAR", |
| multilib => "/64", |
| }, |
| |
| #### SPARC Solaris with Sun C setups |
| # SC4.0 doesn't pass 'make test', upgrade to SC5.0 or SC4.2. |
| # SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8 |
| # SC5.0 note: Compiler common patch 107357-01 or later is required! |
| "solaris-sparcv7-cc" => { |
| inherit_from => [ "solaris-common-cc" ], |
| CC => "cc", |
| CFLAGS => add_before(picker(debug => "-g", |
| release => "-xO5 -xdepend")), |
| cflags => add_before("-xstrconst -Xa"), |
| cppflags => add(threads("-D_REENTRANT")), |
| lib_cppflags => add("-DB_ENDIAN -DBN_DIV2W"), |
| lflags => add(threads("-mt")), |
| ex_libs => add(threads("-lpthread")), |
| bn_ops => "BN_LLONG RC4_CHAR", |
| shared_cflag => "-KPIC", |
| shared_ldflag => add_before("-G -dy -z text"), |
| }, |
| #### |
| "solaris-sparcv8-cc" => { |
| inherit_from => [ "solaris-sparcv7-cc" ], |
| cflags => add_before("-xarch=v8"), |
| asm_arch => 'sparcv8', |
| perlasm_scheme => 'void', |
| }, |
| "solaris-sparcv9-cc" => { |
| inherit_from => [ "solaris-sparcv7-cc" ], |
| cflags => add_before("-xarch=v8plus"), |
| asm_arch => 'sparcv9', |
| perlasm_scheme => 'void', |
| }, |
| "solaris64-sparcv9-cc" => { |
| inherit_from => [ "solaris-sparcv7-cc" ], |
| cflags => add_before("-m64 -xarch=sparc"), |
| bn_ops => "BN_LLONG RC4_CHAR", |
| asm_arch => 'sparcv9', |
| perlasm_scheme => 'void', |
| multilib => "/64", |
| }, |
| |
| #### IRIX 6.x configs |
| # Only N32 and N64 ABIs are supported. |
| "irix-common" => { |
| inherit_from => [ "BASE_unix" ], |
| template => 1, |
| cppflags => threads("-D_SGI_MP_SOURCE"), |
| lib_cppflags => "-DB_ENDIAN", |
| ex_libs => add(threads("-lpthread")), |
| thread_scheme => "pthreads", |
| dso_scheme => "dlfcn", |
| shared_target => "self", |
| shared_ldflag => "-shared -Wl,-Bsymbolic", |
| shared_sonameflag=> "-Wl,-soname,", |
| }, |
| "irix-mips3-gcc" => { |
| inherit_from => [ "irix-common" ], |
| CC => "gcc", |
| CFLAGS => picker(debug => "-g -O0", |
| release => "-O3"), |
| LDFLAGS => "-static-libgcc", |
| cflags => "-mabi=n32", |
| bn_ops => "RC4_CHAR SIXTY_FOUR_BIT", |
| asm_arch => 'mips64', |
| perlasm_scheme => "n32", |
| multilib => "32", |
| }, |
| "irix-mips3-cc" => { |
| inherit_from => [ "irix-common" ], |
| CC => "cc", |
| CFLAGS => picker(debug => "-g -O0", |
| release => "-O2"), |
| cflags => "-n32 -mips3 -use_readonly_const -G0 -rdata_shared", |
| bn_ops => "RC4_CHAR SIXTY_FOUR_BIT", |
| asm_arch => 'mips64', |
| perlasm_scheme => "n32", |
| multilib => "32", |
| }, |
| # N64 ABI builds. |
| "irix64-mips4-gcc" => { |
| inherit_from => [ "irix-common" ], |
| CC => "gcc", |
| CFLAGS => picker(debug => "-g -O0", |
| release => "-O3"), |
| LDFLAGS => "-static-libgcc", |
| cflags => "-mabi=64 -mips4", |
| bn_ops => "RC4_CHAR SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'mips64', |
| perlasm_scheme => "64", |
| multilib => "64", |
| }, |
| "irix64-mips4-cc" => { |
| inherit_from => [ "irix-common" ], |
| CC => "cc", |
| CFLAGS => picker(debug => "-g -O0", |
| release => "-O2"), |
| cflags => "-64 -mips4 -use_readonly_const -G0 -rdata_shared", |
| bn_ops => "RC4_CHAR SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'mips64', |
| perlasm_scheme => "64", |
| multilib => "64", |
| }, |
| |
| #### Unified HP-UX ANSI C configs. |
| # Special notes: |
| # - Originally we were optimizing at +O4 level. It should be noted |
| # that the only difference between +O3 and +O4 is global inter- |
| # procedural analysis. As it has to be performed during the link |
| # stage the compiler leaves behind certain pseudo-code in lib*.a |
| # which might be release or even patch level specific. Generating |
| # the machine code for and analyzing the *whole* program appears |
| # to be *extremely* memory demanding while the performance gain is |
| # actually questionable. The situation is intensified by the default |
| # HP-UX data set size limit (infamous 'maxdsiz' tunable) of 64MB |
| # which is way too low for +O4. In other words, doesn't +O3 make |
| # more sense? |
| # - Keep in mind that the HP compiler by default generates code |
| # suitable for execution on the host you're currently compiling at. |
| # If the toolkit is meant to be used on various PA-RISC processors |
| # consider './Configure hpux-parisc-[g]cc +DAportable'. |
| # - -DMD32_XARRAY triggers workaround for compiler bug we ran into in |
| # 32-bit message digests. (For the moment of this writing) HP C |
| # doesn't seem to "digest" too many local variables (they make "him" |
| # chew forever:-). For more details look-up MD32_XARRAY comment in |
| # crypto/sha/sha_local.h. |
| # - originally there were 32-bit hpux-parisc2-* targets. They were |
| # scrapped, because a) they were not interchangeable with other 32-bit |
| # targets; b) performance-critical 32-bit assembly modules implement |
| # even PA-RISC 2.0-specific code paths, which are chosen at run-time, |
| # thus adequate performance is provided even with PA-RISC 1.1 build. |
| "hpux-common" => { |
| inherit_from => [ "BASE_unix" ], |
| template => 1, |
| defines => add("_XOPEN_SOURCE", "_XOPEN_SOURCE_EXTENDED", |
| "_HPUX_ALT_XOPEN_SOCKET_API"), |
| lib_cppflags => "-DB_ENDIAN", |
| thread_scheme => "pthreads", |
| dso_scheme => "dlfcn", # overridden in 32-bit PA-RISC builds |
| shared_target => "self", |
| bin_lflags => "-Wl,+s,+cdp,../:,+cdp,./:", |
| shared_ldflag => "-Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+cdp,../:,+cdp,./:", |
| shared_sonameflag=> "-Wl,+h,", |
| }, |
| "hpux-parisc-gcc" => { |
| inherit_from => [ "hpux-common" ], |
| CC => "gcc", |
| CFLAGS => picker(debug => "-O0 -g", |
| release => "-O3"), |
| cflags => add(threads("-pthread")), |
| lib_cppflags => add("-DBN_DIV2W"), |
| ex_libs => add("-ldld", threads("-pthread")), |
| bn_ops => "BN_LLONG RC4_CHAR", |
| dso_scheme => "dl", |
| shared_cflag => "-fPIC", |
| shared_ldflag => add_before("-shared"), |
| shared_extension => ".sl.\$(SHLIB_VERSION_NUMBER)", |
| }, |
| "hpux-parisc1_1-gcc" => { |
| inherit_from => [ "hpux-parisc-gcc" ], |
| asm_arch => 'parisc11', |
| perlasm_scheme => "32", |
| multilib => "/pa1.1", |
| }, |
| "hpux64-parisc2-gcc" => { |
| inherit_from => [ "hpux-common" ], |
| CC => "gcc", |
| CFLAGS => combine(picker(debug => "-O0 -g", |
| release => "-O3")), |
| cflags => add(threads("-pthread")), |
| ex_libs => add("-ldl", threads("-pthread")), |
| bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR", |
| asm_arch => 'parisc20_64', |
| perlasm_scheme => "64", |
| shared_cflag => "-fpic", |
| shared_ldflag => add_before("-shared"), |
| shared_extension => ".sl.\$(SHLIB_VERSION_NUMBER)", |
| multilib => "/pa20_64", |
| }, |
| |
| # More attempts at unified 10.X and 11.X targets for HP C compiler. |
| "hpux-parisc-cc" => { |
| inherit_from => [ "hpux-common" ], |
| CC => "cc", |
| CFLAGS => picker(debug => "+O0 +d -g", |
| release => "+O3"), |
| cflags => "+Optrs_strongly_typed -Ae +ESlit", |
| cppflags => threads("-D_REENTRANT"), |
| lib_cppflags => add("-DBN_DIV2W -DMD32_XARRAY"), |
| ex_libs => add("-ldld", threads("-lpthread")), |
| bn_ops => "RC4_CHAR", |
| dso_scheme => "dl", |
| shared_cflag => "+Z", |
| shared_ldflag => add_before("-b"), |
| shared_extension => ".sl.\$(SHLIB_VERSION_NUMBER)", |
| }, |
| "hpux-parisc1_1-cc" => { |
| inherit_from => [ "hpux-parisc-cc" ], |
| cflags => add_before("+DA1.1"), |
| asm_arch => 'parisc11', |
| perlasm_scheme => "32", |
| multilib => "/pa1.1", |
| }, |
| "hpux64-parisc2-cc" => { |
| inherit_from => [ "hpux-common" ], |
| CC => "cc", |
| CFLAGS => picker(debug => "+O0 +d -g", |
| release => "+O3") , |
| cflags => "+DD64 +Optrs_strongly_typed -Ae +ESlit", |
| cppflags => threads("-D_REENTRANT") , |
| lib_cppflags => add("-DMD32_XARRAY"), |
| ex_libs => add("-ldl", threads("-lpthread")), |
| bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR", |
| asm_arch => 'parisc20_64', |
| perlasm_scheme => "64", |
| shared_cflag => "+Z", |
| shared_ldflag => add_before("-b"), |
| shared_extension => ".sl.\$(SHLIB_VERSION_NUMBER)", |
| multilib => "/pa20_64", |
| }, |
| |
| # HP/UX IA-64 targets |
| "hpux-ia64-cc" => { |
| inherit_from => [ "hpux-common" ], |
| CC => "cc", |
| CFLAGS => picker(debug => "+O0 +d -g", |
| release => "+O2"), |
| cflags => "-Ae +DD32 +Olit=all -z", |
| cppflags => add(threads("-D_REENTRANT")), |
| ex_libs => add("-ldl", threads("-lpthread")), |
| bn_ops => "SIXTY_FOUR_BIT", |
| asm_arch => 'ia64', |
| perlasm_scheme => 'void', |
| shared_cflag => "+Z", |
| shared_ldflag => add_before("-b"), |
| multilib => "/hpux32", |
| }, |
| "hpux64-ia64-cc" => { |
| inherit_from => [ "hpux-common" ], |
| CC => "cc", |
| CFLAGS => picker(debug => "+O0 +d -g", |
| release => "+O3"), |
| cflags => "-Ae +DD64 +Olit=all -z", |
| cppflags => threads("-D_REENTRANT"), |
| ex_libs => add("-ldl", threads("-lpthread")), |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'ia64', |
| perlasm_scheme => 'void', |
| shared_cflag => "+Z", |
| shared_ldflag => add_before("-b"), |
| multilib => "/hpux64", |
| }, |
| # GCC builds... |
| "hpux-ia64-gcc" => { |
| inherit_from => [ "hpux-common" ], |
| CC => "gcc", |
| CFLAGS => picker(debug => "-O0 -g", |
| release => "-O3"), |
| cflags => add(threads("-pthread")), |
| ex_libs => add("-ldl", threads("-pthread")), |
| bn_ops => "SIXTY_FOUR_BIT", |
| asm_arch => 'ia64', |
| perlasm_scheme => 'void', |
| shared_cflag => "-fpic", |
| shared_ldflag => add_before("-shared"), |
| multilib => "/hpux32", |
| }, |
| "hpux64-ia64-gcc" => { |
| inherit_from => [ "hpux-common" ], |
| CC => "gcc", |
| CFLAGS => picker(debug => "-O0 -g", |
| release => "-O3"), |
| cflags => combine("-mlp64", threads("-pthread")), |
| ex_libs => add("-ldl", threads("-pthread")), |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'ia64', |
| perlasm_scheme => 'void', |
| shared_cflag => "-fpic", |
| shared_ldflag => add_before("-shared"), |
| multilib => "/hpux64", |
| }, |
| |
| #### HP MPE/iX http://jazz.external.hp.com/src/openssl/ |
| "MPE/iX-gcc" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "gcc", |
| CFLAGS => "-O3", |
| cppflags => "-D_POSIX_SOURCE -D_SOCKET_SOURCE", |
| includes => [ "/SYSLOG/PUB" ], |
| lib_cppflags => "-DBN_DIV2W", |
| sys_id => "MPE", |
| lflags => add("-L/SYSLOG/PUB"), |
| ex_libs => add("-lsyslog -lsocket -lcurses"), |
| thread_scheme => "(unknown)", |
| bn_ops => "BN_LLONG", |
| }, |
| |
| #### DEC Alpha Tru64 targets. Tru64 is marketing name for OSF/1 version 4 |
| #### and forward. In reality 'uname -s' still returns "OSF1". Originally |
| #### there were even osf1-* configs targeting prior versions provided, |
| #### but not anymore... |
| "tru64-alpha-gcc" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "gcc", |
| CFLAGS => "-O3", |
| cflags => add("-std=c9x", threads("-pthread")), |
| cppflags => "-D_XOPEN_SOURCE=500 -D_OSF_SOURCE", |
| ex_libs => add("-lrt", threads("-pthread")), # for mlock(2) |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'alpha', |
| perlasm_scheme => "void", |
| thread_scheme => "pthreads", |
| dso_scheme => "dlfcn", |
| shared_target => "alpha-osf1-shared", |
| shared_extension => ".so", |
| }, |
| "tru64-alpha-cc" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "cc", |
| CFLAGS => "-tune host -fast", |
| cflags => add("-std1 -readonly_strings", |
| threads("-pthread")), |
| cppflags => "-D_XOPEN_SOURCE=500 -D_OSF_SOURCE", |
| ex_libs => add("-lrt", threads("-pthread")), # for mlock(2) |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'alpha', |
| perlasm_scheme => "void", |
| thread_scheme => "pthreads", |
| dso_scheme => "dlfcn", |
| shared_target => "alpha-osf1-shared", |
| shared_ldflag => "-msym", |
| shared_extension => ".so", |
| }, |
| |
| #### |
| #### Variety of LINUX:-) |
| #### |
| # *-generic* is endian-neutral target, but ./config is free to |
| # throw in -D[BL]_ENDIAN, whichever appropriate... |
| "linux-generic32" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "gcc", |
| CXX => "g++", |
| CFLAGS => picker(default => "-Wall", |
| debug => "-O0 -g", |
| release => "-O3"), |
| CXXFLAGS => picker(default => "-Wall", |
| debug => "-O0 -g", |
| release => "-O3"), |
| cflags => threads("-pthread"), |
| cxxflags => combine("-std=c++11", threads("-pthread")), |
| lib_cppflags => "-DOPENSSL_USE_NODELETE", |
| ex_libs => add("-ldl", threads("-pthread")), |
| bn_ops => "BN_LLONG RC4_CHAR", |
| thread_scheme => "pthreads", |
| dso_scheme => "dlfcn", |
| shared_target => "linux-shared", |
| shared_cflag => "-fPIC", |
| shared_ldflag => sub { $disabled{pinshared} ? () : "-Wl,-znodelete" }, |
| enable => [ "afalgeng" ], |
| }, |
| "linux-latomic" => { |
| inherit_from => [ "linux-generic32" ], |
| ex_libs => add(threads("-latomic")), |
| }, |
| "linux-generic64" => { |
| inherit_from => [ "linux-generic32" ], |
| bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR", |
| }, |
| |
| "linux-ppc" => { |
| inherit_from => [ "linux-latomic" ], |
| asm_arch => 'ppc32', |
| perlasm_scheme => "linux32", |
| lib_cppflags => add("-DB_ENDIAN"), |
| }, |
| "linux-ppc64" => { |
| inherit_from => [ "linux-generic64" ], |
| cflags => add("-m64"), |
| cxxflags => add("-m64"), |
| lib_cppflags => add("-DB_ENDIAN"), |
| asm_arch => 'ppc64', |
| perlasm_scheme => "linux64", |
| multilib => "64", |
| }, |
| "linux-ppc64le" => { |
| inherit_from => [ "linux-generic64" ], |
| cflags => add("-m64"), |
| cxxflags => add("-m64"), |
| lib_cppflags => add("-DL_ENDIAN"), |
| asm_arch => 'ppc64', |
| perlasm_scheme => "linux64le", |
| }, |
| |
| "linux-armv4" => { |
| ################################################################ |
| # Note that -march is not among compiler options in linux-armv4 |
| # target description. Not specifying one is intentional to give |
| # you choice to: |
| # |
| # a) rely on your compiler default by not specifying one; |
| # b) specify your target platform explicitly for optimal |
| # performance, e.g. -march=armv6 or -march=armv7-a; |
| # c) build "universal" binary that targets *range* of platforms |
| # by specifying minimum and maximum supported architecture; |
| # |
| # As for c) option. It actually makes no sense to specify |
| # maximum to be less than ARMv7, because it's the least |
| # requirement for run-time switch between platform-specific |
| # code paths. And without run-time switch performance would be |
| # equivalent to one for minimum. Secondly, there are some |
| # natural limitations that you'd have to accept and respect. |
| # Most notably you can *not* build "universal" binary for |
| # big-endian platform. This is because ARMv7 processor always |
| # picks instructions in little-endian order. Another similar |
| # limitation is that -mthumb can't "cross" -march=armv6t2 |
| # boundary, because that's where it became Thumb-2. Well, this |
| # limitation is a bit artificial, because it's not really |
| # impossible, but it's deemed too tricky to support. And of |
| # course you have to be sure that your binutils are actually |
| # up to the task of handling maximum target platform. With all |
| # this in mind here is an example of how to configure |
| # "universal" build: |
| # |
| # ./Configure linux-armv4 -march=armv6 -D__ARM_MAX_ARCH__=8 |
| # |
| inherit_from => [ "linux-latomic" ], |
| asm_arch => 'armv4', |
| perlasm_scheme => "linux32", |
| }, |
| "linux-aarch64" => { |
| inherit_from => [ "linux-generic64" ], |
| asm_arch => 'aarch64', |
| perlasm_scheme => "linux64", |
| }, |
| "linux-arm64ilp32" => { # https://wiki.linaro.org/Platform/arm64-ilp32 |
| inherit_from => [ "linux-generic32" ], |
| cflags => add("-mabi=ilp32"), |
| cxxflags => add("-mabi=ilp32"), |
| bn_ops => "SIXTY_FOUR_BIT RC4_CHAR", |
| asm_arch => 'aarch64', |
| perlasm_scheme => "linux64", |
| }, |
| |
| "linux-mips32" => { |
| # Configure script adds minimally required -march for assembly |
| # support, if no -march was specified at command line. |
| inherit_from => [ "linux-latomic" ], |
| cflags => add("-mabi=32"), |
| cxxflags => add("-mabi=32"), |
| asm_arch => 'mips32', |
| perlasm_scheme => "o32", |
| }, |
| # mips32 and mips64 below refer to contemporary MIPS Architecture |
| # specifications, MIPS32 and MIPS64, rather than to kernel bitness. |
| "linux-mips64" => { |
| inherit_from => [ "linux-latomic" ], |
| cflags => add("-mabi=n32"), |
| cxxflags => add("-mabi=n32"), |
| bn_ops => "RC4_CHAR", |
| asm_arch => 'mips64', |
| perlasm_scheme => "n32", |
| multilib => "32", |
| }, |
| "linux64-mips64" => { |
| inherit_from => [ "linux-generic64" ], |
| cflags => add("-mabi=64"), |
| cxxflags => add("-mabi=64"), |
| asm_arch => 'mips64', |
| perlasm_scheme => "64", |
| multilib => "64", |
| }, |
| |
| # riscv64 below refers to contemporary RISCV Architecture |
| # specifications, |
| "linux64-riscv64" => { |
| inherit_from => [ "linux-generic64"], |
| perlasm_scheme => "linux64", |
| }, |
| |
| #### IA-32 targets... |
| #### These two targets are a bit aged and are to be used on older Linux |
| #### machines where gcc doesn't understand -m32 and -m64 |
| "linux-elf" => { |
| inherit_from => [ "linux-generic32" ], |
| CFLAGS => add(picker(release => "-fomit-frame-pointer")), |
| lib_cppflags => add("-DL_ENDIAN"), |
| bn_ops => "BN_LLONG", |
| asm_arch => 'x86', |
| perlasm_scheme => "elf", |
| }, |
| "linux-aout" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "gcc", |
| CFLAGS => add(picker(default => "-Wall", |
| debug => "-O0 -g", |
| release => "-O3 -fomit-frame-pointer")), |
| lib_cppflags => add("-DL_ENDIAN"), |
| bn_ops => "BN_LLONG", |
| thread_scheme => "(unknown)", |
| asm_arch => 'x86', |
| perlasm_scheme => "a.out", |
| }, |
| |
| #### X86 / X86_64 targets |
| "linux-x86" => { |
| inherit_from => [ "linux-generic32" ], |
| CFLAGS => add(picker(release => "-fomit-frame-pointer")), |
| cflags => add("-m32"), |
| cxxflags => add("-m32"), |
| lib_cppflags => add("-DL_ENDIAN"), |
| bn_ops => "BN_LLONG", |
| asm_arch => 'x86', |
| perlasm_scheme => "elf", |
| }, |
| "linux-x86-clang" => { |
| inherit_from => [ "linux-x86" ], |
| CC => "clang", |
| CXX => "clang++", |
| }, |
| "linux-x86_64" => { |
| inherit_from => [ "linux-generic64" ], |
| cflags => add("-m64"), |
| cxxflags => add("-m64"), |
| lib_cppflags => add("-DL_ENDIAN"), |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'x86_64', |
| perlasm_scheme => "elf", |
| multilib => "64", |
| }, |
| "linux-x86_64-clang" => { |
| inherit_from => [ "linux-x86_64" ], |
| CC => "clang", |
| CXX => "clang++", |
| }, |
| "linux-x32" => { |
| inherit_from => [ "linux-generic32" ], |
| cflags => add("-mx32"), |
| cxxflags => add("-mx32"), |
| lib_cppflags => add("-DL_ENDIAN"), |
| bn_ops => "SIXTY_FOUR_BIT", |
| asm_arch => 'x86_64', |
| perlasm_scheme => "elf32", |
| multilib => "x32", |
| }, |
| |
| "linux-ia64" => { |
| inherit_from => [ "linux-generic64" ], |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'ia64', |
| perlasm_scheme => 'void', |
| }, |
| |
| "linux64-s390x" => { |
| inherit_from => [ "linux-generic64" ], |
| cflags => add("-m64"), |
| cxxflags => add("-m64"), |
| lib_cppflags => add("-DB_ENDIAN"), |
| asm_arch => 's390x', |
| perlasm_scheme => "64", |
| multilib => "64", |
| }, |
| "linux32-s390x" => { |
| #### So called "highgprs" target for z/Architecture CPUs |
| # "Highgprs" is kernel feature first implemented in Linux |
| # 2.6.32, see /proc/cpuinfo. The idea is to preserve most |
| # significant bits of general purpose registers not only |
| # upon 32-bit process context switch, but even on |
| # asynchronous signal delivery to such process. This makes |
| # it possible to deploy 64-bit instructions even in legacy |
| # application context and achieve better [or should we say |
| # adequate] performance. The build is binary compatible with |
| # linux-generic32, and the idea is to be able to install the |
| # resulting libcrypto.so alongside generic one, e.g. as |
| # /lib/highgprs/libcrypto.so.x.y, for ldconfig and run-time |
| # linker to autodiscover. Unfortunately it doesn't work just |
| # yet, because of couple of bugs in glibc |
| # sysdeps/s390/dl-procinfo.c affecting ldconfig and ld.so.1... |
| # |
| inherit_from => [ "linux-generic32" ], |
| cflags => add("-m31 -Wa,-mzarch"), |
| cxxflags => add("-m31 -Wa,-mzarch"), |
| lib_cppflags => add("-DB_ENDIAN"), |
| asm_arch => 's390x', |
| perlasm_scheme => "31", |
| multilib => "/highgprs", |
| }, |
| |
| #### SPARC Linux setups |
| "linux-sparcv8" => { |
| inherit_from => [ "linux-latomic" ], |
| cflags => add("-mcpu=v8"), |
| cxxflags => add("-mcpu=v8"), |
| lib_cppflags => add("-DB_ENDIAN -DBN_DIV2W"), |
| asm_arch => 'sparcv8', |
| perlasm_scheme => 'void', |
| }, |
| "linux-sparcv9" => { |
| # it's a real mess with -mcpu=ultrasparc option under Linux, |
| # but -Wa,-Av8plus should do the trick no matter what. |
| inherit_from => [ "linux-latomic" ], |
| cflags => add("-m32 -mcpu=ultrasparc -Wa,-Av8plus"), |
| cxxflags => add("-m32 -mcpu=ultrasparc -Wa,-Av8plus"), |
| lib_cppflags => add("-DB_ENDIAN -DBN_DIV2W"), |
| asm_arch => 'sparcv9', |
| perlasm_scheme => 'void', |
| }, |
| "linux64-sparcv9" => { |
| # GCC 3.1 is a requirement |
| inherit_from => [ "linux-generic64" ], |
| cflags => add("-m64 -mcpu=ultrasparc"), |
| cxxflags => add("-m64 -mcpu=ultrasparc"), |
| lib_cppflags => add("-DB_ENDIAN"), |
| ex_libs => add(threads("-latomic")), |
| bn_ops => "BN_LLONG RC4_CHAR", |
| asm_arch => 'sparcv9', |
| perlasm_scheme => 'void', |
| multilib => "64", |
| }, |
| |
| "linux-alpha-gcc" => { |
| inherit_from => [ "linux-generic64" ], |
| lib_cppflags => add("-DL_ENDIAN"), |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'alpha', |
| perlasm_scheme => "void", |
| }, |
| "linux-c64xplus" => { |
| inherit_from => [ "BASE_unix" ], |
| # TI_CGT_C6000_7.3.x is a requirement |
| CC => "cl6x", |
| CFLAGS => "-o2 -ox -ms", |
| cflags => "--linux -ea=.s -eo=.o -mv6400+ -pden", |
| cxxflags => "--linux -ea=.s -eo=.o -mv6400+ -pden", |
| cppflags => combine("-DOPENSSL_SMALL_FOOTPRINT", |
| threads("-D_REENTRANT")), |
| bn_ops => "BN_LLONG", |
| thread_scheme => "pthreads", |
| asm_arch => 'c64xplus', |
| perlasm_scheme => "void", |
| dso_scheme => "dlfcn", |
| shared_target => "linux-shared", |
| shared_cflag => "--pic", |
| shared_ldflag => add("-z --sysv --shared"), |
| ranlib => "true", |
| }, |
| |
| #### *BSD |
| "BSD-generic32" => { |
| # As for thread cflag. Idea is to maintain "collective" set of |
| # flags, which would cover all BSD flavors. -pthread applies |
| # to them all, but is treated differently. OpenBSD expands is |
| # as -D_POSIX_THREAD -lc_r, which is sufficient. FreeBSD 4.x |
| # expands it as -lc_r, which has to be accompanied by explicit |
| # -D_THREAD_SAFE and sometimes -D_REENTRANT. FreeBSD 5.x |
| # expands it as -lc_r, which seems to be sufficient? |
| inherit_from => [ "BASE_unix" ], |
| CC => "cc", |
| CFLAGS => picker(default => "-Wall", |
| debug => "-O0 -g", |
| release => "-O3"), |
| cflags => threads("-pthread"), |
| cppflags => threads("-D_THREAD_SAFE -D_REENTRANT"), |
| ex_libs => add(threads("-pthread")), |
| enable => add("devcryptoeng"), |
| bn_ops => "BN_LLONG", |
| thread_scheme => "pthreads", |
| dso_scheme => "dlfcn", |
| shared_target => "bsd-gcc-shared", |
| shared_cflag => "-fPIC", |
| }, |
| "BSD-generic64" => { |
| inherit_from => [ "BSD-generic32" ], |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| }, |
| |
| "BSD-x86" => { |
| inherit_from => [ "BSD-generic32" ], |
| CFLAGS => add(picker(release => "-fomit-frame-pointer")), |
| lib_cppflags => add("-DL_ENDIAN"), |
| bn_ops => "BN_LLONG", |
| asm_arch => 'x86', |
| perlasm_scheme => "a.out", |
| }, |
| "BSD-x86-elf" => { |
| inherit_from => [ "BSD-x86" ], |
| perlasm_scheme => "elf", |
| }, |
| |
| "BSD-sparcv8" => { |
| inherit_from => [ "BSD-generic32" ], |
| cflags => add("-mcpu=v8"), |
| lib_cppflags => add("-DB_ENDIAN"), |
| asm_arch => 'sparcv8', |
| perlasm_scheme => 'void', |
| }, |
| "BSD-sparc64" => { |
| # -DMD32_REG_T=int doesn't actually belong in sparc64 target, it |
| # simply *happens* to work around a compiler bug in gcc 3.3.3, |
| # triggered by RIPEMD160 code. |
| inherit_from => [ "BSD-generic64" ], |
| lib_cppflags => add("-DB_ENDIAN -DMD32_REG_T=int"), |
| bn_ops => "BN_LLONG", |
| asm_arch => 'sparcv9', |
| perlasm_scheme => 'void', |
| }, |
| |
| "BSD-ia64" => { |
| inherit_from => [ "BSD-generic64" ], |
| lib_cppflags => add("-DL_ENDIAN"), |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'ia64', |
| perlasm_scheme => 'void', |
| }, |
| |
| "BSD-x86_64" => { |
| inherit_from => [ "BSD-generic64" ], |
| lib_cppflags => add("-DL_ENDIAN"), |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'x86_64', |
| perlasm_scheme => "elf", |
| }, |
| |
| "bsdi-elf-gcc" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "gcc", |
| CFLAGS => "-fomit-frame-pointer -O3 -Wall", |
| lib_cppflags => "-DPERL5 -DL_ENDIAN", |
| ex_libs => add("-ldl"), |
| bn_ops => "BN_LLONG", |
| asm_arch => 'x86', |
| perlasm_scheme => "elf", |
| thread_scheme => "(unknown)", |
| dso_scheme => "dlfcn", |
| shared_target => "bsd-gcc-shared", |
| shared_cflag => "-fPIC", |
| }, |
| |
| #### SCO/Caldera targets. |
| # |
| # Originally we had like unixware-*, unixware-*-pentium, unixware-*-p6, etc. |
| # Now we only have blended unixware-* as it's the only one used by ./config. |
| # If you want to optimize for particular microarchitecture, bypass ./config |
| # and './Configure unixware-7 -Kpentium_pro' or whatever appropriate. |
| # Note that not all targets include assembler support. Mostly because of |
| # lack of motivation to support out-of-date platforms with out-of-date |
| # compiler drivers and assemblers. |
| # |
| # UnixWare 2.0x fails destest with -O. |
| "unixware-2.0" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "cc", |
| cflags => threads("-Kthread"), |
| lib_cppflags => "-DFILIO_H -DNO_STRINGS_H", |
| ex_libs => add("-lsocket -lnsl -lresolv -lx"), |
| thread_scheme => "uithreads", |
| }, |
| "unixware-2.1" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "cc", |
| CFLAGS => "-O", |
| cflags => threads("-Kthread"), |
| lib_cppflags => "-DFILIO_H", |
| ex_libs => add("-lsocket -lnsl -lresolv -lx"), |
| thread_scheme => "uithreads", |
| }, |
| "unixware-7" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "cc", |
| CFLAGS => "-O", |
| cflags => combine("-Kalloca", threads("-Kthread")), |
| lib_cppflags => "-DFILIO_H", |
| ex_libs => add("-lsocket -lnsl"), |
| thread_scheme => "uithreads", |
| bn_ops => "BN_LLONG", |
| asm_arch => 'x86', |
| perlasm_scheme => "elf-1", |
| dso_scheme => "dlfcn", |
| shared_target => "svr5-shared", |
| shared_cflag => "-Kpic", |
| }, |
| "unixware-7-gcc" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "gcc", |
| CFLAGS => "-O3 -fomit-frame-pointer -Wall", |
| cppflags => add(threads("-D_REENTRANT")), |
| lib_cppflags => add("-DL_ENDIAN -DFILIO_H"), |
| ex_libs => add("-lsocket -lnsl"), |
| bn_ops => "BN_LLONG", |
| thread_scheme => "pthreads", |
| asm_arch => 'x86', |
| perlasm_scheme => "elf-1", |
| dso_scheme => "dlfcn", |
| shared_target => "gnu-shared", |
| shared_cflag => "-fPIC", |
| }, |
| # SCO 5 - Ben Laurie says the -O breaks the SCO cc. |
| "sco5-cc" => { |
| inherit_from => [ "BASE_unix" ], |
| cc => "cc", |
| cflags => "-belf", |
| ex_libs => add("-lsocket -lnsl"), |
| thread_scheme => "(unknown)", |
| asm_arch => 'x86', |
| perlasm_scheme => "elf-1", |
| dso_scheme => "dlfcn", |
| shared_target => "svr3-shared", |
| shared_cflag => "-Kpic", |
| }, |
| "sco5-gcc" => { |
| inherit_from => [ "BASE_unix" ], |
| cc => "gcc", |
| cflags => "-O3 -fomit-frame-pointer", |
| ex_libs => add("-lsocket -lnsl"), |
| bn_ops => "BN_LLONG", |
| thread_scheme => "(unknown)", |
| asm_arch => 'x86', |
| perlasm_scheme => "elf-1", |
| dso_scheme => "dlfcn", |
| shared_target => "svr3-shared", |
| shared_cflag => "-fPIC", |
| }, |
| |
| #### IBM's AIX. |
| # Below targets assume AIX >=5. Caveat lector. If you are accustomed |
| # to control compilation "bitness" by setting $OBJECT_MODE environment |
| # variable, then you should know that in OpenSSL case it's considered |
| # only in ./config. Once configured, build procedure remains "deaf" to |
| # current value of $OBJECT_MODE. |
| "aix-common" => { |
| inherit_from => [ "BASE_unix" ], |
| template => 1, |
| sys_id => "AIX", |
| lib_cppflags => "-DB_ENDIAN", |
| lflags => "-Wl,-bsvr4", |
| thread_scheme => "pthreads", |
| dso_scheme => "dlfcn", |
| shared_target => "aix", |
| module_ldflags => "-Wl,-G,-bsymbolic,-bnoentry", |
| shared_ldflag => "-Wl,-G,-bsymbolic,-bnoentry", |
| shared_defflag => "-Wl,-bE:", |
| shared_fipsflag => "-Wl,-binitfini:_init:_cleanup", |
| perl_platform => 'AIX', |
| }, |
| "aix-gcc" => { |
| inherit_from => [ "aix-common" ], |
| CC => "gcc", |
| CFLAGS => picker(debug => "-O0 -g", |
| release => "-O"), |
| cflags => add(threads("-pthread")), |
| ex_libs => add(threads("-pthread")), |
| bn_ops => "BN_LLONG RC4_CHAR", |
| asm_arch => 'ppc32', |
| perlasm_scheme => "aix32", |
| shared_ldflag => add_before("-shared -static-libgcc"), |
| AR => add("-X32"), |
| RANLIB => add("-X32"), |
| }, |
| "aix64-gcc" => { |
| inherit_from => [ "aix-common" ], |
| CC => "gcc", |
| CFLAGS => picker(debug => "-O0 -g", |
| release => "-O"), |
| cflags => combine("-maix64", threads("-pthread")), |
| ex_libs => add(threads("-pthread")), |
| bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR", |
| asm_arch => 'ppc64', |
| perlasm_scheme => "aix64", |
| shared_ldflag => add_before("-shared -static-libgcc"), |
| shared_extension => "64.so.\$(SHLIB_VERSION_NUMBER)", |
| AR => add("-X64"), |
| RANLIB => add("-X64"), |
| }, |
| "aix64-gcc-as" => { |
| inherit_from => [ "aix64-gcc" ], |
| perlasm_scheme => "aix64-as", |
| }, |
| "aix-cc" => { |
| inherit_from => [ "aix-common" ], |
| CC => "cc", |
| CFLAGS => picker(debug => "-O0 -g", |
| release => "-O"), |
| cflags => combine("-q32 -qmaxmem=16384 -qro -qroconst", |
| threads("-qthreaded")), |
| cppflags => threads("-D_THREAD_SAFE"), |
| ex_libs => add(threads("-lpthreads")), |
| bn_ops => "BN_LLONG RC4_CHAR", |
| asm_arch => 'ppc32', |
| perlasm_scheme => "aix32", |
| shared_cflag => "-qpic", |
| AR => add("-X32"), |
| RANLIB => add("-X32"), |
| }, |
| "aix64-cc" => { |
| inherit_from => [ "aix-common" ], |
| CC => "cc", |
| CFLAGS => picker(debug => "-O0 -g", |
| release => "-O"), |
| cflags => combine("-q64 -qmaxmem=16384 -qro -qroconst", |
| threads("-qthreaded")), |
| cppflags => threads("-D_THREAD_SAFE"), |
| ex_libs => add(threads("-lpthreads")), |
| bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR", |
| asm_arch => 'ppc64', |
| perlasm_scheme => "aix64", |
| dso_scheme => "dlfcn", |
| shared_cflag => "-qpic", |
| shared_extension => "64.so.\$(SHLIB_VERSION_NUMBER)", |
| AR => add("-X64"), |
| RANLIB => add("-X64"), |
| }, |
| |
| # SIEMENS BS2000/OSD: an EBCDIC-based mainframe |
| "BS2000-OSD" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "c89", |
| CFLAGS => "-O", |
| cflags => "-XLLML -XLLMK -XL", |
| cppflags => "-DCHARSET_EBCDIC", |
| lib_cppflags => "-DB_ENDIAN", |
| ex_libs => add("-lsocket -lnsl"), |
| bn_ops => "THIRTY_TWO_BIT RC4_CHAR", |
| thread_scheme => "(unknown)", |
| }, |
| |
| #### Visual C targets |
| # |
| # Win64 targets, WIN64I denotes IA-64/Itanium and WIN64A - AMD64 |
| # |
| # Note about /wd4090, disable warning C4090. This warning returns false |
| # positives in some situations. Disabling it altogether masks both |
| # legitimate and false cases, but as we compile on multiple platforms, |
| # we rely on other compilers to catch legitimate cases. |
| # |
| # Also note that we force threads no matter what. Configuring "no-threads" |
| # is ignored. |
| # |
| # UNICODE is defined in VC-common and applies to all targets. It used to |
| # be an opt-in option for VC-WIN32, but not anymore. The original reason |
| # was because ANSI API was *native* system interface for no longer |
| # supported Windows 9x. Keep in mind that UNICODE only affects how |
| # OpenSSL libraries interact with underlying OS, it doesn't affect API |
| # that OpenSSL presents to application. |
| |
| "VC-common" => { |
| inherit_from => [ "BASE_Windows" ], |
| template => 1, |
| CC => "cl", |
| CPP => '"$(CC)" /EP /C', |
| CFLAGS => "/W3 /wd4090 /nologo", |
| coutflag => "/Fo", |
| LD => "link", |
| LDFLAGS => "/nologo /debug", |
| ldoutflag => "/out:", |
| ldpostoutflag => "", |
| ld_resp_delim => "\n", |
| bin_lflags => "setargv.obj", |
| makedepcmd => '"$(CC)" /Zs /showIncludes', |
| makedep_scheme => 'VC', |
| AR => "lib", |
| ARFLAGS => "/nologo", |
| aroutflag => "/out:", |
| ar_resp_delim => "\n", |
| RC => "rc", |
| rcoutflag => "/fo", |
| defines => add("OPENSSL_SYS_WIN32", "WIN32_LEAN_AND_MEAN", |
| "UNICODE", "_UNICODE", |
| "_CRT_SECURE_NO_DEPRECATE", |
| "_WINSOCK_DEPRECATED_NO_WARNINGS"), |
| lib_cflags => add("/Zi /Fdossl_static.pdb"), |
| lib_defines => add("L_ENDIAN"), |
| dso_cflags => "/Zi /Fddso.pdb", |
| bin_cflags => "/Zi /Fdapp.pdb", |
| # def_flag made to empty string so a .def file gets generated |
| shared_defflag => '', |
| shared_ldflag => "/dll", |
| shared_target => "win-shared", # meaningless except it gives Configure a hint |
| lddefflag => "/def:", |
| ldresflag => " ", |
| ld_implib_flag => "/implib:", |
| thread_scheme => "winthreads", |
| dso_scheme => "win32", |
| perl_platform => 'Windows::MSVC', |
| # additional parameter to build_scheme denotes install-path "flavour" |
| build_scheme => add("VC-common", { separator => undef }), |
| }, |
| "VC-noCE-common" => { |
| inherit_from => [ "VC-common" ], |
| template => 1, |
| CFLAGS => add(picker(debug => '/Od', |
| release => '/O2')), |
| cflags => add(picker(default => '/Gs0 /GF /Gy', |
| debug => |
| sub { |
| ($disabled{shared} ? "" : "/MDd"); |
| }, |
| release => |
| sub { |
| ($disabled{shared} ? "" : "/MD"); |
| })), |
| defines => add(picker(default => [], # works as type cast |
| debug => [ "DEBUG", "_DEBUG" ])), |
| lib_cflags => add(sub { $disabled{shared} ? "/MT /Zl" : () }), |
| # Following might/should appears controversial, i.e. defining |
| # /MDd without evaluating $disabled{shared}. It works in |
| # non-shared build because static library is compiled with /Zl |
| # and bares no reference to specific RTL. And it works in |
| # shared build because multiple /MDd options are not prohibited. |
| # But why /MDd in static build? Well, basically this is just a |
| # reference point, which allows to catch eventual errors that |
| # would prevent those who want to wrap OpenSSL into own .DLL. |
| # Why not /MD in release build then? Well, some are likely to |
| # prefer [non-debug] openssl.exe to be free from Micorosoft RTL |
| # redistributable. |
| bin_cflags => add(picker(debug => "/MDd", |
| release => sub { $disabled{shared} ? "/MT" : () }, |
| )), |
| bin_lflags => add("/subsystem:console /opt:ref"), |
| ex_libs => add(sub { |
| my @ex_libs = (); |
| push @ex_libs, 'ws2_32.lib' unless $disabled{sock}; |
| push @ex_libs, 'gdi32.lib advapi32.lib crypt32.lib user32.lib'; |
| return join(" ", @ex_libs); |
| }), |
| }, |
| "VC-WIN64-common" => { |
| inherit_from => [ "VC-noCE-common" ], |
| template => 1, |
| ex_libs => add(sub { |
| my @ex_libs = (); |
| push @ex_libs, 'bufferoverflowu.lib' if (`cl 2>&1` =~ /14\.00\.4[0-9]{4}\./); |
| return join(" ", @_, @ex_libs); |
| }), |
| bn_ops => add("SIXTY_FOUR_BIT"), |
| }, |
| "VC-WIN64I" => { |
| inherit_from => [ "VC-WIN64-common" ], |
| AS => "ias", |
| ASFLAGS => "-d debug", |
| asoutflag => "-o ", |
| sys_id => "WIN64I", |
| uplink_arch => 'ia64', |
| asm_arch => 'ia64', |
| perlasm_scheme => "ias", |
| multilib => "-ia64", |
| }, |
| "VC-WIN64A" => { |
| inherit_from => [ "VC-WIN64-common" ], |
| AS => sub { vc_win64a_info()->{AS} }, |
| ASFLAGS => sub { vc_win64a_info()->{ASFLAGS} }, |
| asoutflag => sub { vc_win64a_info()->{asoutflag} }, |
| asflags => sub { vc_win64a_info()->{asflags} }, |
| sys_id => "WIN64A", |
| uplink_arch => 'x86_64', |
| asm_arch => 'x86_64', |
| perlasm_scheme => "auto", |
| multilib => "-x64", |
| }, |
| "VC-WIN32" => { |
| inherit_from => [ "VC-noCE-common" ], |
| AS => sub { vc_win32_info()->{AS} }, |
| ASFLAGS => sub { vc_win32_info()->{ASFLAGS} }, |
| asoutflag => sub { vc_win32_info()->{asoutflag} }, |
| asflags => sub { vc_win32_info()->{asflags} }, |
| sys_id => "WIN32", |
| bn_ops => add("BN_LLONG"), |
| uplink_arch => 'common', |
| asm_arch => 'x86', |
| perlasm_scheme => sub { vc_win32_info()->{perlasm_scheme} }, |
| # "WOW" stands for "Windows on Windows", and "VC-WOW" engages |
| # some installation path heuristics in windows-makefile.tmpl... |
| build_scheme => add("VC-WOW", { separator => undef }), |
| }, |
| "VC-CE" => { |
| inherit_from => [ "VC-common" ], |
| CFLAGS => add(picker(debug => "/Od", |
| release => "/O1i")), |
| CPPDEFINES => picker(debug => [ "DEBUG", "_DEBUG" ]), |
| LDFLAGS => add("/nologo /opt:ref"), |
| cflags => |
| combine('/GF /Gy', |
| sub { vc_wince_info()->{cflags}; }, |
| sub { `cl 2>&1` =~ /Version ([0-9]+)\./ && $1>=14 |
| ? ($disabled{shared} ? " /MT" : " /MD") |
| : " /MC"; }), |
| cppflags => sub { vc_wince_info()->{cppflags}; }, |
| lib_defines => add("NO_CHMOD", "OPENSSL_SMALL_FOOTPRINT"), |
| lib_cppflags => sub { vc_wince_info()->{cppflags}; }, |
| includes => |
| add(combine(sub { defined(env('WCECOMPAT')) |
| ? '$(WCECOMPAT)/include' : (); }, |
| sub { defined(env('PORTSDK_LIBPATH')) |
| ? '$(PORTSDK_LIBPATH)/../../include' |
| : (); })), |
| lflags => add(combine(sub { vc_wince_info()->{lflags}; }, |
| sub { defined(env('PORTSDK_LIBPATH')) |
| ? "/entry:mainCRTstartup" : (); })), |
| sys_id => "WINCE", |
| bn_ops => add("BN_LLONG"), |
| ex_libs => add(sub { |
| my @ex_libs = (); |
| push @ex_libs, 'ws2.lib' unless $disabled{sock}; |
| push @ex_libs, 'crypt32.lib'; |
| if (defined(env('WCECOMPAT'))) { |
| my $x = '$(WCECOMPAT)/lib'; |
| if (-f "$x/env('TARGETCPU')/wcecompatex.lib") { |
| $x .= '/$(TARGETCPU)/wcecompatex.lib'; |
| } else { |
| $x .= '/wcecompatex.lib'; |
| } |
| push @ex_libs, $x; |
| } |
| push @ex_libs, '$(PORTSDK_LIBPATH)/portlib.lib' |
| if (defined(env('PORTSDK_LIBPATH'))); |
| push @ex_libs, '/nodefaultlib coredll.lib corelibc.lib' |
| if (env('TARGETCPU') =~ /^X86|^ARMV4[IT]/); |
| return join(" ", @ex_libs); |
| }), |
| }, |
| |
| #### MinGW |
| "mingw-common" => { |
| inherit_from => [ 'BASE_unix' ], |
| template => 1, |
| CC => "gcc", |
| CFLAGS => picker(default => "-Wall", |
| debug => "-g -O0", |
| release => "-O3"), |
| cppflags => combine("-DUNICODE -D_UNICODE -DWIN32_LEAN_AND_MEAN", |
| threads("-D_MT")), |
| lib_cppflags => "-DL_ENDIAN", |
| ex_libs => add("-lws2_32 -lgdi32 -lcrypt32"), |
| thread_scheme => "winthreads", |
| dso_scheme => "win32", |
| shared_target => "mingw-shared", |
| shared_cppflags => add("_WINDLL"), |
| shared_ldflag => "-static-libgcc", |
| |
| perl_platform => 'mingw', |
| }, |
| "mingw" => { |
| inherit_from => [ "mingw-common" ], |
| CFLAGS => add(picker(release => "-fomit-frame-pointer")), |
| cflags => "-m32", |
| sys_id => "MINGW32", |
| bn_ops => add("BN_LLONG"), |
| asm_arch => 'x86', |
| uplink_arch => 'x86', |
| perlasm_scheme => "coff", |
| shared_rcflag => "--target=pe-i386", |
| multilib => "", |
| }, |
| "mingw64" => { |
| # As for uplink_arch. Applink makes it possible to use |
| # .dll compiled with one compiler with application compiled with |
| # another compiler. It's possible to engage Applink support in |
| # mingw64 build, but it's not done, because until mingw64 |
| # supports structured exception handling, one can't seriously |
| # consider its binaries for using with non-mingw64 run-time |
| # environment. And as mingw64 is always consistent with itself, |
| # Applink is never engaged and can as well be omitted. |
| inherit_from => [ "mingw-common" ], |
| cflags => "-m64", |
| sys_id => "MINGW64", |
| bn_ops => add("SIXTY_FOUR_BIT"), |
| asm_arch => 'x86_64', |
| uplink_arch => undef, |
| perlasm_scheme => "mingw64", |
| shared_rcflag => "--target=pe-x86-64", |
| multilib => "64", |
| }, |
| |
| #### UEFI |
| "UEFI" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "cc", |
| CFLAGS => "-O", |
| lib_cppflags => "-DL_ENDIAN", |
| sys_id => "UEFI", |
| }, |
| "UEFI-x86" => { |
| inherit_from => [ "UEFI" ], |
| asm_arch => 'x86', |
| perlasm_scheme => "win32n", |
| }, |
| "UEFI-x86_64" => { |
| inherit_from => [ "UEFI" ], |
| asm_arch => 'x86_64', |
| perlasm_scheme => "nasm", |
| }, |
| |
| #### UWIN |
| "UWIN" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "cc", |
| CFLAGS => "-O -Wall", |
| lib_cppflags => "-DTERMIOS -DL_ENDIAN", |
| sys_id => "UWIN", |
| bn_ops => "BN_LLONG", |
| dso_scheme => "win32", |
| }, |
| |
| #### Cygwin |
| "Cygwin-common" => { |
| inherit_from => [ "BASE_unix" ], |
| template => 1, |
| |
| CC => "gcc", |
| CFLAGS => picker(default => "-Wall", |
| debug => "-g -O0", |
| release => "-O3"), |
| lib_cppflags => "-DTERMIOS -DL_ENDIAN", |
| sys_id => "CYGWIN", |
| thread_scheme => "pthread", |
| dso_scheme => "dlfcn", |
| shared_target => "cygwin-shared", |
| shared_cppflags => "-D_WINDLL", |
| |
| perl_platform => 'Cygwin', |
| }, |
| "Cygwin-x86" => { |
| inherit_from => [ "Cygwin-common" ], |
| CFLAGS => add(picker(release => "-O3 -fomit-frame-pointer")), |
| bn_ops => "BN_LLONG", |
| asm_arch => 'x86', |
| perlasm_scheme => "coff", |
| }, |
| "Cygwin-x86_64" => { |
| inherit_from => [ "Cygwin-common" ], |
| CC => "gcc", |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'x86_64', |
| perlasm_scheme => "mingw64", |
| }, |
| # Backward compatibility for those using this target |
| "Cygwin" => { |
| inherit_from => [ "Cygwin-x86" ] |
| }, |
| # In case someone constructs the Cygwin target name themself |
| "Cygwin-i386" => { |
| inherit_from => [ "Cygwin-x86" ] |
| }, |
| "Cygwin-i486" => { |
| inherit_from => [ "Cygwin-x86" ] |
| }, |
| "Cygwin-i586" => { |
| inherit_from => [ "Cygwin-x86" ] |
| }, |
| "Cygwin-i686" => { |
| inherit_from => [ "Cygwin-x86" ] |
| }, |
| |
| ##### MacOS X (a.k.a. Darwin) setup |
| "darwin-common" => { |
| inherit_from => [ "BASE_unix" ], |
| template => 1, |
| CC => "cc", |
| CFLAGS => picker(debug => "-g -O0", |
| release => "-O3"), |
| cppflags => threads("-D_REENTRANT"), |
| lflags => add("-Wl,-search_paths_first"), |
| sys_id => "MACOSX", |
| bn_ops => "BN_LLONG RC4_CHAR", |
| thread_scheme => "pthreads", |
| perlasm_scheme => "osx32", |
| dso_scheme => "dlfcn", |
| ranlib => "ranlib -c", |
| shared_target => "darwin-shared", |
| shared_cflag => "-fPIC", |
| shared_extension => ".\$(SHLIB_VERSION_NUMBER).dylib", |
| }, |
| # Option "freeze" such as -std=gnu9x can't negatively interfere |
| # with future defaults for below two targets, because MacOS X |
| # for PPC has no future, it was discontinued by vendor in 2009. |
| "darwin-ppc-cc" => { inherit_from => [ "darwin-ppc" ] }, # Historic alias |
| "darwin-ppc" => { |
| inherit_from => [ "darwin-common" ], |
| cflags => add("-arch ppc -std=gnu9x -Wa,-force_cpusubtype_ALL"), |
| lib_cppflags => add("-DB_ENDIAN"), |
| shared_cflag => add("-fno-common"), |
| asm_arch => 'ppc32', |
| perlasm_scheme => "osx32", |
| }, |
| "darwin64-ppc-cc" => { inherit_from => [ "darwin64-ppc" ] }, # Historic alias |
| "darwin64-ppc" => { |
| inherit_from => [ "darwin-common" ], |
| cflags => add("-arch ppc64 -std=gnu9x"), |
| lib_cppflags => add("-DB_ENDIAN"), |
| bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR", |
| asm_arch => 'ppc64', |
| perlasm_scheme => "osx64", |
| }, |
| "darwin-i386-cc" => { inherit_from => [ "darwin-i386" ] }, # Historic alias |
| "darwin-i386" => { |
| inherit_from => [ "darwin-common" ], |
| CFLAGS => add(picker(release => "-fomit-frame-pointer")), |
| cflags => add("-arch i386"), |
| lib_cppflags => add("-DL_ENDIAN"), |
| bn_ops => "BN_LLONG RC4_INT", |
| asm_arch => 'x86', |
| perlasm_scheme => "macosx", |
| }, |
| "darwin64-x86_64-cc" => { inherit_from => [ "darwin64-x86_64" ] }, # Historic alias |
| "darwin64-x86_64" => { |
| inherit_from => [ "darwin-common" ], |
| CFLAGS => add("-Wall"), |
| cflags => add("-arch x86_64"), |
| lib_cppflags => add("-DL_ENDIAN"), |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'x86_64', |
| perlasm_scheme => "macosx", |
| }, |
| "darwin64-arm64-cc" => { inherit_from => [ "darwin64-arm64" ] }, # "Historic" alias |
| "darwin64-arm64" => { |
| inherit_from => [ "darwin-common" ], |
| CFLAGS => add("-Wall"), |
| cflags => add("-arch arm64"), |
| lib_cppflags => add("-DL_ENDIAN"), |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| asm_arch => 'aarch64', |
| perlasm_scheme => "ios64", |
| }, |
| |
| ##### GNU Hurd |
| "hurd-x86" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "gcc", |
| CFLAGS => "-O3 -fomit-frame-pointer -Wall", |
| cflags => threads("-pthread"), |
| lib_cppflags => "-DL_ENDIAN", |
| ex_libs => add("-ldl", threads("-pthread")), |
| bn_ops => "BN_LLONG", |
| asm_arch => 'x86', |
| perlasm_scheme => 'elf', |
| thread_scheme => "pthreads", |
| dso_scheme => "dlfcn", |
| shared_target => "linux-shared", |
| shared_cflag => "-fPIC", |
| }, |
| |
| ##### VxWorks for various targets |
| "vxworks-ppc60x" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "ccppc", |
| CFLAGS => "-O2 -Wall -fstrength-reduce", |
| cflags => "-mrtp -mhard-float -mstrict-align -fno-implicit-fp -fno-builtin -fno-strict-aliasing", |
| cppflags => combine("-D_REENTRANT -DPPC32_fp60x -DCPU=PPC32", |
| "_DTOOL_FAMILY=gnu -DTOOL=gnu", |
| "-I\$(WIND_BASE)/target/usr/h", |
| "-I\$(WIND_BASE)/target/usr/h/wrn/coreip"), |
| sys_id => "VXWORKS", |
| lflags => add("-L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/common"), |
| ex_libs => add("-Wl,--defsym,__wrs_rtp_base=0xe0000000"), |
| }, |
| "vxworks-ppcgen" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "ccppc", |
| CFLAGS => "-O1 -Wall", |
| cflags => "-mrtp -msoft-float -mstrict-align -fno-builtin -fno-strict-aliasing", |
| cppflags => combine("-D_REENTRANT -DPPC32 -DCPU=PPC32", |
| "-DTOOL_FAMILY=gnu -DTOOL=gnu", |
| "-I\$(WIND_BASE)/target/usr/h", |
| "-I\$(WIND_BASE)/target/usr/h/wrn/coreip"), |
| sys_id => "VXWORKS", |
| lflags => add("-L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/sfcommon"), |
| ex_libs => add("-Wl,--defsym,__wrs_rtp_base=0xe0000000"), |
| }, |
| "vxworks-ppc405" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "ccppc", |
| CFLAGS => "-g", |
| cflags => "-msoft-float -mlongcall", |
| cppflags => combine("-D_REENTRANT -DPPC32 -DCPU=PPC405", |
| "-DTOOL_FAMILY=gnu -DTOOL=gnu", |
| "-I\$(WIND_BASE)/target/h"), |
| sys_id => "VXWORKS", |
| lflags => add("-r"), |
| }, |
| "vxworks-ppc750" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "ccppc", |
| CFLAGS => "-ansi -fvolatile -Wall \$(DEBUG_FLAG)", |
| cflags => "-nostdinc -fno-builtin -fno-for-scope -fsigned-char -msoft-float -mlongcall", |
| cppflags => combine("-DPPC750 -D_REENTRANT -DCPU=PPC604", |
| "-I\$(WIND_BASE)/target/h"), |
| sys_id => "VXWORKS", |
| lflags => add("-r"), |
| }, |
| "vxworks-ppc750-debug" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "ccppc", |
| CFLAGS => "-ansi -fvolatile -Wall -g", |
| cflags => "-nostdinc -fno-builtin -fno-for-scope -fsigned-char -msoft-float -mlongcall", |
| cppflags => combine("-DPPC750 -D_REENTRANT -DCPU=PPC604", |
| "-DPEDANTIC -DDEBUG", |
| "-I\$(WIND_BASE)/target/h"), |
| sys_id => "VXWORKS", |
| lflags => add("-r"), |
| }, |
| "vxworks-ppc860" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "ccppc", |
| cflags => "-nostdinc -msoft-float", |
| cppflags => combine("-DCPU=PPC860 -DNO_STRINGS_H", |
| "-I\$(WIND_BASE)/target/h"), |
| sys_id => "VXWORKS", |
| lflags => add("-r"), |
| }, |
| "vxworks-simlinux" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "ccpentium", |
| cflags => "-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -fno-builtin -fno-defer-pop", |
| cppflags => combine("-D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\"", |
| "-DL_ENDIAN -DCPU=SIMLINUX -DNO_STRINGS_H", |
| "-DTOOL_FAMILY=gnu -DTOOL=gnu", |
| "-DOPENSSL_NO_HW_PADLOCK", |
| "-I\$(WIND_BASE)/target/h", |
| "-I\$(WIND_BASE)/target/h/wrn/coreip"), |
| sys_id => "VXWORKS", |
| lflags => add("-r"), |
| ranlib => "ranlibpentium", |
| }, |
| "vxworks-mips" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => "ccmips", |
| CFLAGS => "-O -G 0", |
| cflags => "-mrtp -mips2 -B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -msoft-float -mno-branch-likely -fno-builtin -fno-defer-pop", |
| cppflags => combine("-D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\"", |
| "-DCPU=MIPS32 -DNO_STRINGS_H", |
| "-DTOOL_FAMILY=gnu -DTOOL=gnu", |
| "-DOPENSSL_NO_HW_PADLOCK", |
| threads("-D_REENTRANT"), |
| "-I\$(WIND_BASE)/target/h", |
| "-I\$(WIND_BASE)/target/h/wrn/coreip"), |
| sys_id => "VXWORKS", |
| lflags => add("-L \$(WIND_BASE)/target/usr/lib/mips/MIPSI32/sfcommon"), |
| ex_libs => add("-Wl,--defsym,__wrs_rtp_base=0xe0000000"), |
| thread_scheme => "pthreads", |
| asm_arch => 'mips32', |
| perlasm_scheme => "o32", |
| ranlib => "ranlibmips", |
| }, |
| |
| #### uClinux |
| "uClinux-dist" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => sub { env('CC') }, |
| cppflags => threads("-D_REENTRANT"), |
| ex_libs => add("\$(LDLIBS)"), |
| bn_ops => "BN_LLONG", |
| thread_scheme => "pthreads", |
| dso_scheme => sub { env('LIBSSL_dlfcn') }, |
| shared_target => "linux-shared", |
| shared_cflag => "-fPIC", |
| ranlib => sub { env('RANLIB') }, |
| }, |
| "uClinux-dist64" => { |
| inherit_from => [ "BASE_unix" ], |
| CC => sub { env('CC') }, |
| cppflags => threads("-D_REENTRANT"), |
| ex_libs => add("\$(LDLIBS)"), |
| bn_ops => "SIXTY_FOUR_BIT_LONG", |
| thread_scheme => "pthreads", |
| dso_scheme => sub { env('LIBSSL_dlfcn') }, |
| shared_target => "linux-shared", |
| shared_cflag => "-fPIC", |
| ranlib => sub { env('RANLIB') }, |
| }, |
| |
| ##### VMS |
| # Most things happen in vms-generic. |
| # Note that vms_info extracts the pointer size from the end of |
| # the target name, and will assume that anything matching /-p\d+$/ |
| # indicates the pointer size setting for the desired target. |
| "vms-generic" => { |
| inherit_from => [ "BASE_VMS" ], |
| template => 1, |
| CC => "CC/DECC", |
| CPP => '$(CC)/PREPROCESS_ONLY=SYS$OUTPUT:', |
| CFLAGS => |
| combine(picker(default => "/STANDARD=(ISOC94,RELAXED)/NOLIST/PREFIX=ALL", |
| debug => "/NOOPTIMIZE/DEBUG", |
| release => "/OPTIMIZE/NODEBUG"), |
| sub { my @warnings = |
| @{vms_info()->{disable_warns}}; |
| @warnings |
| ? "/WARNINGS=DISABLE=(".join(",",@warnings).")" : (); }), |
| cflag_incfirst => '/FIRST_INCLUDE=', |
| lib_defines => |
| add("OPENSSL_USE_NODELETE", |
| sub { |
| return vms_info()->{def_zlib} |
| ? "LIBZ=\"\"\"".vms_info()->{def_zlib}."\"\"\"" : (); |
| }), |
| lflags => picker(default => "/MAP='F\$PARSE(\".MAP\",\"\$\@\")'", |
| debug => "/DEBUG/TRACEBACK", |
| release => "/NODEBUG/NOTRACEBACK"), |
| # Because of dso_cflags below, we can't set the generic |cflags| here, |
| # as it can't be overridden, so we set separate C flags for libraries |
| # and binaries instead. |
| bin_cflags => add("/NAMES=(AS_IS,SHORTENED)/EXTERN_MODEL=STRICT_REFDEF"), |
| lib_cflags => add("/NAMES=(AS_IS,SHORTENED)/EXTERN_MODEL=STRICT_REFDEF"), |
| # Strictly speaking, DSOs should not need to have name shortening, |
| # as all their exported symbols should be short enough to fit the |
| # linker's 31 character per symbol name limit. However, providers |
| # may be composed of more than one object file, and internal symbols |
| # may and do surpass the 31 character limit. |
| dso_cflags => add("/NAMES=(SHORTENED)"), |
| ex_libs => add(sub { return vms_info()->{zlib} || (); }), |
| shared_target => "vms-shared", |
| # def_flag made to empty string so a .opt file gets generated |
| shared_defflag => '', |
| dso_scheme => "vms", |
| thread_scheme => "pthreads", |
| |
| makedep_scheme => 'VMS C', |
| AS => sub { vms_info()->{AS} }, |
| ASFLAGS => sub { vms_info()->{ASFLAGS} }, |
| asoutflag => sub { vms_info()->{asoutflag} }, |
| asflags => sub { vms_info()->{asflags} }, |
| perlasm_scheme => sub { vms_info()->{perlasm_scheme} }, |
| |
| disable => add('pinshared', 'loadereng'), |
| |
| }, |
| |
| # From HELP CC/POINTER_SIZE: |
| # |
| # ---------- |
| # LONG[=ARGV] The compiler assumes 64-bit pointers. If the ARGV option to |
| # LONG or 64 is present, the main argument argv will be an |
| # array of long pointers instead of an array of short pointers. |
| # |
| # 64[=ARGV] Same as LONG. |
| # ---------- |
| # |
| # We don't want the hassle of dealing with 32-bit pointers with argv, so |
| # we force it to have 64-bit pointers, see the added cflags in the -p64 |
| # config targets below. |
| |
| "vms-alpha" => { |
| inherit_from => [ "vms-generic" ], |
| bn_ops => "SIXTY_FOUR_BIT RC4_INT", |
| pointer_size => "", |
| }, |
| "vms-alpha-p32" => { |
| inherit_from => [ "vms-alpha" ], |
| cflags => add("/POINTER_SIZE=32"), |
| pointer_size => "32", |
| }, |
| "vms-alpha-p64" => { |
| inherit_from => [ "vms-alpha" ], |
| cflags => add("/POINTER_SIZE=64=ARGV"), |
| pointer_size => "64", |
| }, |
| "vms-ia64" => { |
| inherit_from => [ "vms-generic" ], |
| bn_ops => "SIXTY_FOUR_BIT RC4_INT", |
| asm_arch => sub { vms_info()->{AS} ? 'ia64' : undef }, |
| perlasm_scheme => 'ias', |
| pointer_size => "", |
| |
| }, |
| "vms-ia64-p32" => { |
| inherit_from => [ "vms-ia64" ], |
| cflags => add("/POINTER_SIZE=32"), |
| pointer_size => "32", |
| }, |
| "vms-ia64-p64" => { |
| inherit_from => [ "vms-ia64" ], |
| cflags => add("/POINTER_SIZE=64=ARGV"), |
| pointer_size => "64", |
| }, |
| |
| ); |
