| /* |
| * Written by Matt Caswell for the OpenSSL project. |
| */ |
| /* ==================================================================== |
| * Copyright (c) 2016 The OpenSSL Project. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. All advertising materials mentioning features or use of this |
| * software must display the following acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" |
| * |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For written permission, please contact |
| * openssl-core@openssl.org. |
| * |
| * 5. Products derived from this software may not be called "OpenSSL" |
| * nor may "OpenSSL" appear in their names without prior written |
| * permission of the OpenSSL Project. |
| * |
| * 6. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This product includes cryptographic software written by Eric Young |
| * (eay@cryptsoft.com). This product includes software written by Tim |
| * Hudson (tjh@cryptsoft.com). |
| * |
| */ |
| |
| #include <internal/threads.h> |
| #include <internal/cryptlib_int.h> |
| #include <openssl/err.h> |
| #include <openssl/rand.h> |
| #include <openssl/evp.h> |
| #include <internal/evp_int.h> |
| #include <internal/conf.h> |
| #include <internal/async.h> |
| #ifndef OPENSSL_NO_ENGINE |
| #include <internal/engine.h> |
| #endif |
| #include <openssl/comp.h> |
| #include <internal/err.h> |
| #include <stdlib.h> |
| #include <assert.h> |
| |
| static int stopped = 0; |
| |
| static void ossl_init_thread_stop(struct thread_local_inits_st *locals); |
| |
| static CRYPTO_THREAD_LOCAL threadstopkey; |
| |
| static void ossl_init_thread_stop_wrap(void *local) |
| { |
| ossl_init_thread_stop((struct thread_local_inits_st *)local); |
| } |
| |
| static struct thread_local_inits_st *ossl_init_get_thread_local(int alloc) |
| { |
| struct thread_local_inits_st *local = |
| CRYPTO_THREAD_get_local(&threadstopkey); |
| |
| if (local == NULL && alloc) { |
| local = OPENSSL_zalloc(sizeof *local); |
| CRYPTO_THREAD_set_local(&threadstopkey, local); |
| } |
| if (!alloc) { |
| CRYPTO_THREAD_set_local(&threadstopkey, NULL); |
| } |
| |
| return local; |
| } |
| |
| typedef struct ossl_init_stop_st OPENSSL_INIT_STOP; |
| struct ossl_init_stop_st { |
| void (*handler)(void); |
| OPENSSL_INIT_STOP *next; |
| }; |
| |
| static OPENSSL_INIT_STOP *stop_handlers = NULL; |
| static CRYPTO_RWLOCK *init_lock = NULL; |
| |
| static CRYPTO_ONCE base = CRYPTO_ONCE_STATIC_INIT; |
| static int base_inited = 0; |
| static void ossl_init_base(void) |
| { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_base: Setting up stop handlers\n"); |
| #endif |
| /* |
| * We use a dummy thread local key here. We use the destructor to detect |
| * when the thread is going to stop (where that feature is available) |
| */ |
| CRYPTO_THREAD_init_local(&threadstopkey, ossl_init_thread_stop_wrap); |
| #ifndef OPENSSL_SYS_UEFI |
| atexit(OPENSSL_cleanup); |
| #endif |
| init_lock = CRYPTO_THREAD_lock_new(); |
| OPENSSL_cpuid_setup(); |
| base_inited = 1; |
| } |
| |
| static CRYPTO_ONCE load_crypto_strings = CRYPTO_ONCE_STATIC_INIT; |
| static int load_crypto_strings_inited = 0; |
| static void ossl_init_no_load_crypto_strings(void) |
| { |
| /* Do nothing in this case */ |
| return; |
| } |
| |
| static void ossl_init_load_crypto_strings(void) |
| { |
| /* |
| * OPENSSL_NO_AUTOERRINIT is provided here to prevent at compile time |
| * pulling in all the error strings during static linking |
| */ |
| #if !defined(OPENSSL_NO_ERR) && !defined(OPENSSL_NO_AUTOERRINIT) |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_load_crypto_strings: " |
| "err_load_crypto_strings_intern()\n"); |
| # endif |
| err_load_crypto_strings_intern(); |
| #endif |
| load_crypto_strings_inited = 1; |
| } |
| |
| static CRYPTO_ONCE add_all_ciphers = CRYPTO_ONCE_STATIC_INIT; |
| static void ossl_init_add_all_ciphers(void) |
| { |
| /* |
| * OPENSSL_NO_AUTOALGINIT is provided here to prevent at compile time |
| * pulling in all the ciphers during static linking |
| */ |
| #ifndef OPENSSL_NO_AUTOALGINIT |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_add_all_ciphers: " |
| "openssl_add_all_ciphers_internal()\n"); |
| # endif |
| openssl_add_all_ciphers_internal(); |
| # ifndef OPENSSL_NO_ENGINE |
| # if defined(__OpenBSD__) || defined(__FreeBSD__) || defined(HAVE_CRYPTODEV) |
| ENGINE_setup_bsd_cryptodev(); |
| # endif |
| # endif |
| #endif |
| } |
| |
| static CRYPTO_ONCE add_all_digests = CRYPTO_ONCE_STATIC_INIT; |
| static void ossl_init_add_all_digests(void) |
| { |
| /* |
| * OPENSSL_NO_AUTOALGINIT is provided here to prevent at compile time |
| * pulling in all the ciphers during static linking |
| */ |
| #ifndef OPENSSL_NO_AUTOALGINIT |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_add_all_digests: " |
| "openssl_add_all_digests_internal()\n"); |
| # endif |
| openssl_add_all_digests_internal(); |
| # ifndef OPENSSL_NO_ENGINE |
| # if defined(__OpenBSD__) || defined(__FreeBSD__) || defined(HAVE_CRYPTODEV) |
| ENGINE_setup_bsd_cryptodev(); |
| # endif |
| # endif |
| #endif |
| } |
| |
| static void ossl_init_no_add_algs(void) |
| { |
| /* Do nothing */ |
| return; |
| } |
| |
| static CRYPTO_ONCE config = CRYPTO_ONCE_STATIC_INIT; |
| static int config_inited = 0; |
| static const char *config_filename; |
| static void ossl_init_config(void) |
| { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, |
| "OPENSSL_INIT: ossl_init_config: openssl_config_internal(%s)\n", |
| config_filename==NULL?"NULL":config_filename); |
| #endif |
| openssl_config_internal(config_filename); |
| config_inited = 1; |
| } |
| static void ossl_init_no_config(void) |
| { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, |
| "OPENSSL_INIT: ossl_init_config: openssl_no_config_internal()\n"); |
| #endif |
| openssl_no_config_internal(); |
| config_inited = 1; |
| } |
| |
| #ifndef OPENSSL_NO_ASYNC |
| static CRYPTO_ONCE async = CRYPTO_ONCE_STATIC_INIT; |
| static int async_inited = 0; |
| static void ossl_init_async(void) |
| { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_async: async_init()\n"); |
| #endif |
| async_init(); |
| async_inited = 1; |
| } |
| #endif |
| |
| #ifndef OPENSSL_NO_ENGINE |
| static CRYPTO_ONCE engine_openssl = CRYPTO_ONCE_STATIC_INIT; |
| static void ossl_init_engine_openssl(void) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_openssl: " |
| "engine_load_openssl_internal()\n"); |
| # endif |
| engine_load_openssl_internal(); |
| } |
| # if !defined(OPENSSL_NO_HW) && \ |
| (defined(__OpenBSD__) || defined(__FreeBSD__) || defined(HAVE_CRYPTODEV)) |
| static CRYPTO_ONCE engine_cryptodev = CRYPTO_ONCE_STATIC_INIT; |
| static void ossl_init_engine_cryptodev(void) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_cryptodev: " |
| "engine_load_cryptodev_internal()\n"); |
| # endif |
| engine_load_cryptodev_internal(); |
| } |
| # endif |
| |
| # ifndef OPENSSL_NO_RDRAND |
| static CRYPTO_ONCE engine_rdrand = CRYPTO_ONCE_STATIC_INIT; |
| static void ossl_init_engine_rdrand(void) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_rdrand: " |
| "engine_load_rdrand_internal()\n"); |
| # endif |
| engine_load_rdrand_internal(); |
| } |
| # endif |
| static CRYPTO_ONCE engine_dynamic = CRYPTO_ONCE_STATIC_INIT; |
| static void ossl_init_engine_dynamic(void) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_dynamic: " |
| "engine_load_dynamic_internal()\n"); |
| # endif |
| engine_load_dynamic_internal(); |
| } |
| # ifndef OPENSSL_NO_STATIC_ENGINE |
| # if !defined(OPENSSL_NO_HW) && !defined(OPENSSL_NO_HW_PADLOCK) |
| static CRYPTO_ONCE engine_padlock = CRYPTO_ONCE_STATIC_INIT; |
| static void ossl_init_engine_padlock(void) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_padlock: " |
| "engine_load_padlock_internal()\n"); |
| # endif |
| engine_load_padlock_internal(); |
| } |
| # endif |
| # if defined(OPENSSL_SYS_WIN32) && !defined(OPENSSL_NO_CAPIENG) |
| static CRYPTO_ONCE engine_capi = CRYPTO_ONCE_STATIC_INIT; |
| static void ossl_init_engine_capi(void) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_capi: " |
| "engine_load_capi_internal()\n"); |
| # endif |
| engine_load_capi_internal(); |
| } |
| # endif |
| static CRYPTO_ONCE engine_dasync = CRYPTO_ONCE_STATIC_INIT; |
| static void ossl_init_engine_dasync(void) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_dasync: " |
| "engine_load_dasync_internal()\n"); |
| # endif |
| engine_load_dasync_internal(); |
| } |
| # if !defined(OPENSSL_NO_AFALGENG) |
| static OPENSSL_INIT_ONCE engine_afalg = OPENSSL_INIT_ONCE_STATIC_INIT; |
| static void ossl_init_engine_afalg(void) |
| { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_engine_afalg: " |
| "engine_load_afalg_internal()\n"); |
| # endif |
| engine_load_afalg_internal(); |
| } |
| # endif |
| # endif |
| #endif |
| |
| static CRYPTO_ONCE zlib = CRYPTO_ONCE_STATIC_INIT; |
| static int zlib_inited = 0; |
| static void ossl_init_zlib(void) |
| { |
| /* Do nothing - we need to know about this for the later cleanup */ |
| zlib_inited = 1; |
| } |
| |
| static void ossl_init_thread_stop(struct thread_local_inits_st *locals) |
| { |
| /* Can't do much about this */ |
| if (locals == NULL) |
| return; |
| |
| #ifndef OPENSSL_NO_ASYNC |
| if (locals->async) { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_thread_stop: " |
| "ASYNC_cleanup_thread()\n"); |
| #endif |
| ASYNC_cleanup_thread(); |
| } |
| #endif |
| |
| if (locals->err_state) { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_thread_stop: " |
| "ERR_remove_thread_state()\n"); |
| #endif |
| ERR_remove_thread_state(); |
| } |
| |
| OPENSSL_free(locals); |
| } |
| |
| void OPENSSL_thread_stop(void) |
| { |
| ossl_init_thread_stop( |
| (struct thread_local_inits_st *)ossl_init_get_thread_local(0)); |
| } |
| |
| int ossl_init_thread_start(uint64_t opts) |
| { |
| struct thread_local_inits_st *locals = ossl_init_get_thread_local(1); |
| |
| if (locals == NULL) |
| return 0; |
| |
| if (opts & OPENSSL_INIT_THREAD_ASYNC) { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_thread_start: " |
| "marking thread for async\n"); |
| #endif |
| locals->async = 1; |
| } |
| |
| if (opts & OPENSSL_INIT_THREAD_ERR_STATE) { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: ossl_init_thread_start: " |
| "marking thread for err_state\n"); |
| #endif |
| locals->err_state = 1; |
| } |
| |
| return 1; |
| } |
| |
| void OPENSSL_cleanup(void) |
| { |
| OPENSSL_INIT_STOP *currhandler, *lasthandler; |
| |
| /* If we've not been inited then no need to deinit */ |
| if (!base_inited) |
| return; |
| |
| /* Might be explicitly called and also by atexit */ |
| if (stopped) |
| return; |
| stopped = 1; |
| |
| /* |
| * Thread stop may not get automatically called by the thread library for |
| * the very last thread in some situations, so call it directly. |
| */ |
| ossl_init_thread_stop(ossl_init_get_thread_local(0)); |
| |
| currhandler = stop_handlers; |
| while (currhandler != NULL) { |
| currhandler->handler(); |
| lasthandler = currhandler; |
| currhandler = currhandler->next; |
| OPENSSL_free(lasthandler); |
| } |
| stop_handlers = NULL; |
| |
| CRYPTO_THREAD_lock_free(init_lock); |
| |
| /* |
| * We assume we are single-threaded for this function, i.e. no race |
| * conditions for the various "*_inited" vars below. |
| */ |
| |
| if (zlib_inited) { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "COMP_zlib_cleanup()\n"); |
| #endif |
| COMP_zlib_cleanup(); |
| } |
| |
| #ifndef OPENSSL_NO_ASYNC |
| if (async_inited) { |
| # ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "async_deinit()\n"); |
| # endif |
| async_deinit(); |
| } |
| #endif |
| |
| if (load_crypto_strings_inited) { |
| #ifdef OPENSSL_INIT_DEBUG |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "ERR_free_strings()\n"); |
| #endif |
| ERR_free_strings(); |
| } |
| |
| CRYPTO_THREAD_cleanup_local(&threadstopkey); |
| |
| #ifdef OPENSSL_INIT_DEBUG |
| #ifndef OPENSSL_NO_ENGINE |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_cleanup: " |
| "ENGINE_cleanup()\n"); |
| #endif |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_INIT_library_stop: " |
| "CRYPTO_cleanup_all_ex_data()\n"); |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_INIT_library_stop: " |
| "EVP_cleanup()\n"); |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_INIT_library_stop: " |
| "CONF_modules_free()\n"); |
| fprintf(stderr, "OPENSSL_INIT: OPENSSL_INIT_library_stop: " |
| "RAND_cleanup()\n"); |
| |
| #endif |
| #ifndef OPENSSL_NO_ENGINE |
| ENGINE_cleanup(); |
| #endif |
| CRYPTO_cleanup_all_ex_data(); |
| EVP_cleanup(); |
| CONF_modules_free(); |
| RAND_cleanup(); |
| base_inited = 0; |
| } |
| |
| /* |
| * If this function is called with a non NULL settings value then it must be |
| * called prior to any threads making calls to any OpenSSL functions, |
| * i.e. passing a non-null settings value is assumed to be single-threaded. |
| */ |
| int OPENSSL_init_crypto(uint64_t opts, const OPENSSL_INIT_SETTINGS *settings) |
| { |
| static int stoperrset = 0; |
| |
| if (stopped) { |
| if (!stoperrset) { |
| /* |
| * We only ever set this once to avoid getting into an infinite |
| * loop where the error system keeps trying to init and fails so |
| * sets an error etc |
| */ |
| stoperrset = 1; |
| CRYPTOerr(CRYPTO_F_OPENSSL_INIT_CRYPTO, ERR_R_INIT_FAIL); |
| } |
| return 0; |
| } |
| |
| if (!CRYPTO_THREAD_run_once(&base, ossl_init_base)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_NO_LOAD_CRYPTO_STRINGS) |
| && !CRYPTO_THREAD_run_once(&load_crypto_strings, |
| ossl_init_no_load_crypto_strings)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_LOAD_CRYPTO_STRINGS) |
| && !CRYPTO_THREAD_run_once(&load_crypto_strings, |
| ossl_init_load_crypto_strings)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_NO_ADD_ALL_CIPHERS) |
| && !CRYPTO_THREAD_run_once(&add_all_ciphers, ossl_init_no_add_algs)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_ADD_ALL_CIPHERS) |
| && !CRYPTO_THREAD_run_once(&add_all_ciphers, |
| ossl_init_add_all_ciphers)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_NO_ADD_ALL_DIGESTS) |
| && !CRYPTO_THREAD_run_once(&add_all_digests, ossl_init_no_add_algs)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_ADD_ALL_DIGESTS) |
| && !CRYPTO_THREAD_run_once(&add_all_digests, |
| ossl_init_add_all_digests)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_NO_LOAD_CONFIG) |
| && !CRYPTO_THREAD_run_once(&config, ossl_init_no_config)) |
| return 0; |
| |
| if (opts & OPENSSL_INIT_LOAD_CONFIG) { |
| int ret; |
| CRYPTO_THREAD_write_lock(init_lock); |
| config_filename = (settings == NULL) ? NULL : settings->config_name; |
| ret = CRYPTO_THREAD_run_once(&config, ossl_init_config); |
| CRYPTO_THREAD_unlock(init_lock); |
| if (!ret) |
| return 0; |
| } |
| |
| #ifndef OPENSSL_NO_ASYNC |
| if ((opts & OPENSSL_INIT_ASYNC) |
| && !CRYPTO_THREAD_run_once(&async, ossl_init_async)) |
| return 0; |
| #endif |
| #ifndef OPENSSL_NO_ENGINE |
| if ((opts & OPENSSL_INIT_ENGINE_OPENSSL) |
| && !CRYPTO_THREAD_run_once(&engine_openssl, |
| ossl_init_engine_openssl)) |
| return 0; |
| # if !defined(OPENSSL_NO_HW) && \ |
| (defined(__OpenBSD__) || defined(__FreeBSD__) || defined(HAVE_CRYPTODEV)) |
| if ((opts & OPENSSL_INIT_ENGINE_CRYPTODEV) |
| && !CRYPTO_THREAD_run_once(&engine_cryptodev, |
| ossl_init_engine_cryptodev)) |
| return 0; |
| # endif |
| # ifndef OPENSSL_NO_RDRAND |
| if ((opts & OPENSSL_INIT_ENGINE_RDRAND) |
| && !CRYPTO_THREAD_run_once(&engine_rdrand, ossl_init_engine_rdrand)) |
| return 0; |
| # endif |
| if ((opts & OPENSSL_INIT_ENGINE_DYNAMIC) |
| && !CRYPTO_THREAD_run_once(&engine_dynamic, |
| ossl_init_engine_dynamic)) |
| return 0; |
| # ifndef OPENSSL_NO_STATIC_ENGINE |
| # if !defined(OPENSSL_NO_HW) && !defined(OPENSSL_NO_HW_PADLOCK) |
| if ((opts & OPENSSL_INIT_ENGINE_PADLOCK) |
| && CRYPTO_THREAD_run_once(&engine_padlock, |
| ossl_init_engine_padlock)) |
| return 0; |
| # endif |
| # if defined(OPENSSL_SYS_WIN32) && !defined(OPENSSL_NO_CAPIENG) |
| if ((opts & OPENSSL_INIT_ENGINE_CAPI) |
| && CRYPTO_THREAD_run_once(&engine_capi, ossl_init_engine_capi)) |
| return 0; |
| # endif |
| if ((opts & OPENSSL_INIT_ENGINE_DASYNC) |
| && !CRYPTO_THREAD_run_once(&engine_dasync, ossl_init_engine_dasync)) |
| return 0; |
| # if !defined(OPENSSL_NO_AFALGENG) |
| if ((opts & OPENSSL_INIT_ENGINE_AFALG) |
| && !CRYPTO_THREAD_run_once(&engine_afalg, ossl_init_engine_afalg)) |
| return 0; |
| # endif |
| # endif |
| if (opts & (OPENSSL_INIT_ENGINE_ALL_BUILTIN |
| | OPENSSL_INIT_ENGINE_DASYNC | OPENSSL_INIT_ENGINE_OPENSSL |
| | OPENSSL_INIT_ENGINE_AFALG)) { |
| ENGINE_register_all_complete(); |
| } |
| #endif |
| |
| if ((opts & OPENSSL_INIT_ZLIB) |
| && CRYPTO_THREAD_run_once(&zlib, ossl_init_zlib)) |
| return 0; |
| |
| return 1; |
| } |
| |
| int OPENSSL_atexit(void (*handler)(void)) |
| { |
| OPENSSL_INIT_STOP *newhand; |
| |
| newhand = OPENSSL_malloc(sizeof(*newhand)); |
| if (newhand == NULL) |
| return 0; |
| |
| newhand->handler = handler; |
| newhand->next = stop_handlers; |
| stop_handlers = newhand; |
| |
| return 1; |
| } |
| |
| |