doc/man7/EVP_KDF-HKDF.pod - third_party/openssl - Git at Google

 =pod

 =head1 NAME

 EVP_KDF-HKDF - The HKDF EVP_KDF implementation

 =head1 DESCRIPTION

 Support for computing the B<HKDF> KDF through the B<EVP_KDF> API.

 The EVP_KDF-HKDF algorithm implements the HKDF key derivation function.
 HKDF follows the "extract-then-expand" paradigm, where the KDF logically
 consists of two modules. The first stage takes the input keying material
 and "extracts" from it a fixed-length pseudorandom key K. The second stage
 "expands" the key K into several additional pseudorandom keys (the output
 of the KDF).

 =head2 Identity

 "HKDF" is the name for this implementation; it
 can be used with the EVP_KDF_fetch() function.

 =head2 Supported parameters

 The supported parameters are:

 =over 4

 =item "properties" (B<OSSL_KDF_PARAM_PROPERTIES>) <UTF8 string>

 =item "digest" (B<OSSL_KDF_PARAM_DIGEST>) <UTF8 string>

 =item "key" (B<OSSL_KDF_PARAM_KEY>) <octet string>

 =item "salt" (B<OSSL_KDF_PARAM_SALT>) <octet string>

 These parameters work as described in L<EVP_KDF(3)/PARAMETERS>.

 =item "info" (B<OSSL_KDF_PARAM_INFO>) <octet string>

 This parameter sets the info value.
 The length of the context info buffer cannot exceed 1024 bytes;
 this should be more than enough for any normal use of HKDF.

 =item "mode" (B<OSSL_KDF_PARAM_MODE>) <UTF8 string> or <integer>

 This parameter sets the mode for the HKDF operation.
 There are three modes that are currently defined:

 =over 4

 =item "EXTRACT_AND_EXPAND" or B<EVP_KDF_HKDF_MODE_EXTRACT_AND_EXPAND>

 This is the default mode.  Calling L<EVP_KDF_derive(3)> on an EVP_KDF_CTX set
 up for HKDF will perform an extract followed by an expand operation in one go.
 The derived key returned will be the result after the expand operation. The
 intermediate fixed-length pseudorandom key K is not returned.

 In this mode the digest, key, salt and info values must be set before a key is
 derived otherwise an error will occur.

 =item "EXTRACT_ONLY" or B<EVP_KDF_HKDF_MODE_EXTRACT_ONLY>

 In this mode calling L<EVP_KDF_derive(3)> will just perform the extract
 operation. The value returned will be the intermediate fixed-length pseudorandom
 key K.  The I<keylen> parameter must match the size of K, which can be looked
 up by calling EVP_KDF_CTX_get_kdf_size() after setting the mode and digest.

 The digest, key and salt values must be set before a key is derived otherwise
 an error will occur.

 =item "EXPAND_ONLY" or B<EVP_KDF_HKDF_MODE_EXPAND_ONLY>

 In this mode calling L<EVP_KDF_derive(3)> will just perform the expand
 operation. The input key should be set to the intermediate fixed-length
 pseudorandom key K returned from a previous extract operation.

 The digest, key and info values must be set before a key is derived otherwise
 an error will occur.

 =back

 =back

 =head1 NOTES

 A context for HKDF can be obtained by calling:

  EVP_KDF *kdf = EVP_KDF_fetch(NULL, "HKDF", NULL);
  EVP_KDF_CTX *kctx = EVP_KDF_CTX_new(kdf);

 The output length of an HKDF expand operation is specified via the I<keylen>
 parameter to the L<EVP_KDF_derive(3)> function.  When using
 EVP_KDF_HKDF_MODE_EXTRACT_ONLY the I<keylen> parameter must equal the size of
 the intermediate fixed-length pseudorandom key otherwise an error will occur.
 For that mode, the fixed output size can be looked up by calling EVP_KDF_CTX_get_kdf_size()
 after setting the mode and digest on the B<EVP_KDF_CTX>.

 =head1 EXAMPLES

 This example derives 10 bytes using SHA-256 with the secret key "secret",
 salt value "salt" and info value "label":

  EVP_KDF *kdf;
  EVP_KDF_CTX *kctx;
  unsigned char out[10];
  OSSL_PARAM params[5], *p = params;

  kdf = EVP_KDF_fetch(NULL, "HKDF", NULL);
  kctx = EVP_KDF_CTX_new(kdf);
  EVP_KDF_free(kdf);

  *p++ = OSSL_PARAM_construct_utf8_string(OSSL_KDF_PARAM_DIGEST,
                                          SN_sha256, strlen(SN_sha256));
  *p++ = OSSL_PARAM_construct_octet_string(OSSL_KDF_PARAM_KEY,
                                           "secret", (size_t)6);
  *p++ = OSSL_PARAM_construct_octet_string(OSSL_KDF_PARAM_INFO,
                                           "label", (size_t)5);
  *p++ = OSSL_PARAM_construct_octet_string(OSSL_KDF_PARAM_SALT,
                                           "salt", (size_t)4);
  *p = OSSL_PARAM_construct_end();
  if (EVP_KDF_derive(kctx, out, sizeof(out), params) <= 0) {
      error("EVP_KDF_derive");
  }

  EVP_KDF_CTX_free(kctx);

 =head1 CONFORMING TO

 RFC 5869

 =head1 SEE ALSO

 L<EVP_KDF(3)>,
 L<EVP_KDF_CTX_new(3)>,
 L<EVP_KDF_CTX_free(3)>,
 L<EVP_KDF_CTX_get_kdf_size(3)>,
 L<EVP_KDF_CTX_set_params(3)>,
 L<EVP_KDF_derive(3)>,
 L<EVP_KDF(3)/PARAMETERS>,
 L<EVP_KDF-TLS13_KDF(7)>

 =head1 COPYRIGHT

 Copyright 2016-2021 The OpenSSL Project Authors. All Rights Reserved.

 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
 in the file LICENSE in the source distribution or at
 L<https://www.openssl.org/source/license.html>.

 =cut
	=pod

	=head1 NAME

	EVP_KDF-HKDF - The HKDF EVP_KDF implementation

	=head1 DESCRIPTION

	Support for computing the B<HKDF> KDF through the B<EVP_KDF> API.

	The EVP_KDF-HKDF algorithm implements the HKDF key derivation function.
	HKDF follows the "extract-then-expand" paradigm, where the KDF logically
	consists of two modules. The first stage takes the input keying material
	and "extracts" from it a fixed-length pseudorandom key K. The second stage
	"expands" the key K into several additional pseudorandom keys (the output
	of the KDF).

	=head2 Identity

	"HKDF" is the name for this implementation; it
	can be used with the EVP_KDF_fetch() function.

	=head2 Supported parameters

	The supported parameters are:

	=over 4

	=item "properties" (B<OSSL_KDF_PARAM_PROPERTIES>) <UTF8 string>

	=item "digest" (B<OSSL_KDF_PARAM_DIGEST>) <UTF8 string>

	=item "key" (B<OSSL_KDF_PARAM_KEY>) <octet string>

	=item "salt" (B<OSSL_KDF_PARAM_SALT>) <octet string>

	These parameters work as described in L<EVP_KDF(3)/PARAMETERS>.

	=item "info" (B<OSSL_KDF_PARAM_INFO>) <octet string>

	This parameter sets the info value.
	The length of the context info buffer cannot exceed 1024 bytes;
	this should be more than enough for any normal use of HKDF.

	=item "mode" (B<OSSL_KDF_PARAM_MODE>) <UTF8 string> or <integer>

	This parameter sets the mode for the HKDF operation.
	There are three modes that are currently defined:

	=over 4

	=item "EXTRACT_AND_EXPAND" or B<EVP_KDF_HKDF_MODE_EXTRACT_AND_EXPAND>

	This is the default mode. Calling L<EVP_KDF_derive(3)> on an EVP_KDF_CTX set
	up for HKDF will perform an extract followed by an expand operation in one go.
	The derived key returned will be the result after the expand operation. The
	intermediate fixed-length pseudorandom key K is not returned.

	In this mode the digest, key, salt and info values must be set before a key is
	derived otherwise an error will occur.

	=item "EXTRACT_ONLY" or B<EVP_KDF_HKDF_MODE_EXTRACT_ONLY>

	In this mode calling L<EVP_KDF_derive(3)> will just perform the extract
	operation. The value returned will be the intermediate fixed-length pseudorandom
	key K. The I<keylen> parameter must match the size of K, which can be looked
	up by calling EVP_KDF_CTX_get_kdf_size() after setting the mode and digest.

	The digest, key and salt values must be set before a key is derived otherwise
	an error will occur.

	=item "EXPAND_ONLY" or B<EVP_KDF_HKDF_MODE_EXPAND_ONLY>

	In this mode calling L<EVP_KDF_derive(3)> will just perform the expand
	operation. The input key should be set to the intermediate fixed-length
	pseudorandom key K returned from a previous extract operation.

	The digest, key and info values must be set before a key is derived otherwise
	an error will occur.

	=back

	=back

	=head1 NOTES

	A context for HKDF can be obtained by calling:

	EVP_KDF *kdf = EVP_KDF_fetch(NULL, "HKDF", NULL);
	EVP_KDF_CTX *kctx = EVP_KDF_CTX_new(kdf);

	The output length of an HKDF expand operation is specified via the I<keylen>
	parameter to the L<EVP_KDF_derive(3)> function. When using
	EVP_KDF_HKDF_MODE_EXTRACT_ONLY the I<keylen> parameter must equal the size of
	the intermediate fixed-length pseudorandom key otherwise an error will occur.
	For that mode, the fixed output size can be looked up by calling EVP_KDF_CTX_get_kdf_size()
	after setting the mode and digest on the B<EVP_KDF_CTX>.

	=head1 EXAMPLES

	This example derives 10 bytes using SHA-256 with the secret key "secret",
	salt value "salt" and info value "label":

	EVP_KDF *kdf;
	EVP_KDF_CTX *kctx;
	unsigned char out[10];
	OSSL_PARAM params[5], *p = params;

	kdf = EVP_KDF_fetch(NULL, "HKDF", NULL);
	kctx = EVP_KDF_CTX_new(kdf);
	EVP_KDF_free(kdf);

	*p++ = OSSL_PARAM_construct_utf8_string(OSSL_KDF_PARAM_DIGEST,
	SN_sha256, strlen(SN_sha256));
	*p++ = OSSL_PARAM_construct_octet_string(OSSL_KDF_PARAM_KEY,
	"secret", (size_t)6);
	*p++ = OSSL_PARAM_construct_octet_string(OSSL_KDF_PARAM_INFO,
	"label", (size_t)5);
	*p++ = OSSL_PARAM_construct_octet_string(OSSL_KDF_PARAM_SALT,
	"salt", (size_t)4);
	*p = OSSL_PARAM_construct_end();
	if (EVP_KDF_derive(kctx, out, sizeof(out), params) <= 0) {
	error("EVP_KDF_derive");
	}

	EVP_KDF_CTX_free(kctx);

	=head1 CONFORMING TO

	RFC 5869

	=head1 SEE ALSO

	L<EVP_KDF(3)>,
	L<EVP_KDF_CTX_new(3)>,
	L<EVP_KDF_CTX_free(3)>,
	L<EVP_KDF_CTX_get_kdf_size(3)>,
	L<EVP_KDF_CTX_set_params(3)>,
	L<EVP_KDF_derive(3)>,
	L<EVP_KDF(3)/PARAMETERS>,
	L<EVP_KDF-TLS13_KDF(7)>

	=head1 COPYRIGHT

	Copyright 2016-2021 The OpenSSL Project Authors. All Rights Reserved.

	Licensed under the Apache License 2.0 (the "License"). You may not use
	this file except in compliance with the License. You can obtain a copy
	in the file LICENSE in the source distribution or at
	L<https://www.openssl.org/source/license.html>.

	=cut