| /* |
| * Copyright 2017-2020 The OpenSSL Project Authors. All Rights Reserved. |
| * |
| * Licensed under the Apache License 2.0 (the "License"). You may not use |
| * this file except in compliance with the License. You can obtain a copy |
| * in the file LICENSE in the source distribution or at |
| * https://www.openssl.org/source/license.html |
| */ |
| |
| #include "../testutil.h" |
| #include "output.h" |
| #include "tu_local.h" |
| |
| #include <string.h> |
| #include <ctype.h> |
| #include "internal/nelem.h" |
| |
| /* The size of memory buffers to display on failure */ |
| #define MEM_BUFFER_SIZE (2000) |
| #define MAX_STRING_WIDTH (80) |
| #define BN_OUTPUT_SIZE (8) |
| |
| /* Output a diff header */ |
| static void test_diff_header(const char *left, const char *right) |
| { |
| test_printf_stderr("--- %s\n", left); |
| test_printf_stderr("+++ %s\n", right); |
| } |
| |
| /* Formatted string output routines */ |
| static void test_string_null_empty(const char *m, char c) |
| { |
| if (m == NULL) |
| test_printf_stderr("%4s %c NULL\n", "", c); |
| else |
| test_printf_stderr("%4u:%c ''\n", 0u, c); |
| } |
| |
| static void test_fail_string_common(const char *prefix, const char *file, |
| int line, const char *type, |
| const char *left, const char *right, |
| const char *op, const char *m1, size_t l1, |
| const char *m2, size_t l2) |
| { |
| const size_t width = |
| (MAX_STRING_WIDTH - BIO_get_indent(bio_err) - 12) / 16 * 16; |
| char b1[MAX_STRING_WIDTH + 1], b2[MAX_STRING_WIDTH + 1]; |
| char bdiff[MAX_STRING_WIDTH + 1]; |
| size_t n1, n2, i; |
| unsigned int cnt = 0, diff; |
| |
| test_fail_message_prefix(prefix, file, line, type, left, right, op); |
| if (m1 == NULL) |
| l1 = 0; |
| if (m2 == NULL) |
| l2 = 0; |
| if (l1 == 0 && l2 == 0) { |
| if ((m1 == NULL) == (m2 == NULL)) { |
| test_string_null_empty(m1, ' '); |
| } else { |
| test_diff_header(left, right); |
| test_string_null_empty(m1, '-'); |
| test_string_null_empty(m2, '+'); |
| } |
| goto fin; |
| } |
| |
| if (l1 != l2 || strncmp(m1, m2, l1) != 0) |
| test_diff_header(left, right); |
| |
| while (l1 > 0 || l2 > 0) { |
| n1 = n2 = 0; |
| if (l1 > 0) { |
| b1[n1 = l1 > width ? width : l1] = 0; |
| for (i = 0; i < n1; i++) |
| b1[i] = isprint((unsigned char)m1[i]) ? m1[i] : '.'; |
| } |
| if (l2 > 0) { |
| b2[n2 = l2 > width ? width : l2] = 0; |
| for (i = 0; i < n2; i++) |
| b2[i] = isprint((unsigned char)m2[i]) ? m2[i] : '.'; |
| } |
| diff = 0; |
| i = 0; |
| if (n1 > 0 && n2 > 0) { |
| const size_t j = n1 < n2 ? n1 : n2; |
| |
| for (; i < j; i++) |
| if (m1[i] == m2[i]) { |
| bdiff[i] = ' '; |
| } else { |
| bdiff[i] = '^'; |
| diff = 1; |
| } |
| bdiff[i] = '\0'; |
| } |
| if (n1 == n2 && !diff) { |
| test_printf_stderr("%4u: '%s'\n", cnt, n2 > n1 ? b2 : b1); |
| } else { |
| if (cnt == 0 && (m1 == NULL || *m1 == '\0')) |
| test_string_null_empty(m1, '-'); |
| else if (n1 > 0) |
| test_printf_stderr("%4u:- '%s'\n", cnt, b1); |
| if (cnt == 0 && (m2 == NULL || *m2 == '\0')) |
| test_string_null_empty(m2, '+'); |
| else if (n2 > 0) |
| test_printf_stderr("%4u:+ '%s'\n", cnt, b2); |
| if (diff && i > 0) |
| test_printf_stderr("%4s %s\n", "", bdiff); |
| } |
| if (m1 != NULL) |
| m1 += n1; |
| if (m2 != NULL) |
| m2 += n2; |
| l1 -= n1; |
| l2 -= n2; |
| cnt += width; |
| } |
| fin: |
| test_flush_stderr(); |
| } |
| |
| /* |
| * Wrapper routines so that the underlying code can be shared. |
| * The first is the call from inside the test utilities when a conditional |
| * fails. The second is the user's call to dump a string. |
| */ |
| void test_fail_string_message(const char *prefix, const char *file, |
| int line, const char *type, |
| const char *left, const char *right, |
| const char *op, const char *m1, size_t l1, |
| const char *m2, size_t l2) |
| { |
| test_fail_string_common(prefix, file, line, type, left, right, op, |
| m1, l1, m2, l2); |
| test_printf_stderr("\n"); |
| } |
| |
| void test_output_string(const char *name, const char *m, size_t l) |
| { |
| test_fail_string_common("string", NULL, 0, NULL, NULL, NULL, name, |
| m, l, m, l); |
| } |
| |
| /* BIGNUM formatted output routines */ |
| |
| /* |
| * A basic memory byte to hex digit converter with allowance for spacing |
| * every so often. |
| */ |
| static void hex_convert_memory(const unsigned char *m, size_t n, char *b, |
| size_t width) |
| { |
| size_t i; |
| |
| for (i = 0; i < n; i++) { |
| const unsigned char c = *m++; |
| |
| *b++ = "0123456789abcdef"[c >> 4]; |
| *b++ = "0123456789abcdef"[c & 15]; |
| if (i % width == width - 1 && i != n - 1) |
| *b++ = ' '; |
| } |
| *b = '\0'; |
| } |
| |
| /* |
| * Constants to define the number of bytes to display per line and the number |
| * of characters these take. |
| */ |
| static const int bn_bytes = (MAX_STRING_WIDTH - 9) / (BN_OUTPUT_SIZE * 2 + 1) |
| * BN_OUTPUT_SIZE; |
| static const int bn_chars = (MAX_STRING_WIDTH - 9) / (BN_OUTPUT_SIZE * 2 + 1) |
| * (BN_OUTPUT_SIZE * 2 + 1) - 1; |
| |
| /* |
| * Output the header line for the bignum |
| */ |
| static void test_bignum_header_line(void) |
| { |
| test_printf_stderr(" %*s\n", bn_chars + 6, "bit position"); |
| } |
| |
| static const char *test_bignum_zero_null(const BIGNUM *bn) |
| { |
| if (bn != NULL) |
| return BN_is_negative(bn) ? "-0" : "0"; |
| return "NULL"; |
| } |
| |
| /* |
| * Print a bignum zero taking care to include the correct sign. |
| * This routine correctly deals with a NULL bignum pointer as input. |
| */ |
| static void test_bignum_zero_print(const BIGNUM *bn, char sep) |
| { |
| const char *v = test_bignum_zero_null(bn); |
| const char *suf = bn != NULL ? ": 0" : ""; |
| |
| test_printf_stderr("%c%*s%s\n", sep, bn_chars, v, suf); |
| } |
| |
| /* |
| * Convert a section of memory from inside a bignum into a displayable |
| * string with appropriate visual aid spaces inserted. |
| */ |
| static int convert_bn_memory(const unsigned char *in, size_t bytes, |
| char *out, int *lz, const BIGNUM *bn) |
| { |
| int n = bytes * 2, i; |
| char *p = out, *q = NULL; |
| const char *r; |
| |
| if (bn != NULL && !BN_is_zero(bn)) { |
| hex_convert_memory(in, bytes, out, BN_OUTPUT_SIZE); |
| if (*lz) { |
| for (; *p == '0' || *p == ' '; p++) |
| if (*p == '0') { |
| q = p; |
| *p = ' '; |
| n--; |
| } |
| if (*p == '\0') { |
| /* |
| * in[bytes] is defined because we're converting a non-zero |
| * number and we've not seen a non-zero yet. |
| */ |
| if ((in[bytes] & 0xf0) != 0 && BN_is_negative(bn)) { |
| *lz = 0; |
| *q = '-'; |
| n++; |
| } |
| } else { |
| *lz = 0; |
| if (BN_is_negative(bn)) { |
| /* |
| * This is valid because we always convert more digits than |
| * the number holds. |
| */ |
| *q = '-'; |
| n++; |
| } |
| } |
| } |
| return n; |
| } |
| |
| for (i = 0; i < n; i++) { |
| *p++ = ' '; |
| if (i % (2 * BN_OUTPUT_SIZE) == 2 * BN_OUTPUT_SIZE - 1 && i != n - 1) |
| *p++ = ' '; |
| } |
| *p = '\0'; |
| if (bn == NULL) |
| r = "NULL"; |
| else |
| r = BN_is_negative(bn) ? "-0" : "0"; |
| strcpy(p - strlen(r), r); |
| return 0; |
| } |
| |
| /* |
| * Common code to display either one or two bignums, including the diff |
| * pointers for changes (only when there are two). |
| */ |
| static void test_fail_bignum_common(const char *prefix, const char *file, |
| int line, const char *type, |
| const char *left, const char *right, |
| const char *op, |
| const BIGNUM *bn1, const BIGNUM *bn2) |
| { |
| const size_t bytes = bn_bytes; |
| char b1[MAX_STRING_WIDTH + 1], b2[MAX_STRING_WIDTH + 1]; |
| char *p, bdiff[MAX_STRING_WIDTH + 1]; |
| size_t l1, l2, n1, n2, i, len; |
| unsigned int cnt, diff, real_diff; |
| unsigned char *m1 = NULL, *m2 = NULL; |
| int lz1 = 1, lz2 = 1; |
| unsigned char buffer[MEM_BUFFER_SIZE * 2], *bufp = buffer; |
| |
| test_fail_message_prefix(prefix, file, line, type, left, right, op); |
| l1 = bn1 == NULL ? 0 : (BN_num_bytes(bn1) + (BN_is_negative(bn1) ? 1 : 0)); |
| l2 = bn2 == NULL ? 0 : (BN_num_bytes(bn2) + (BN_is_negative(bn2) ? 1 : 0)); |
| if (l1 == 0 && l2 == 0) { |
| if ((bn1 == NULL) == (bn2 == NULL)) { |
| test_bignum_header_line(); |
| test_bignum_zero_print(bn1, ' '); |
| } else { |
| test_diff_header(left, right); |
| test_bignum_header_line(); |
| test_bignum_zero_print(bn1, '-'); |
| test_bignum_zero_print(bn2, '+'); |
| } |
| goto fin; |
| } |
| |
| if (l1 != l2 || bn1 == NULL || bn2 == NULL || BN_cmp(bn1, bn2) != 0) |
| test_diff_header(left, right); |
| test_bignum_header_line(); |
| |
| len = ((l1 > l2 ? l1 : l2) + bytes - 1) / bytes * bytes; |
| |
| if (len > MEM_BUFFER_SIZE && (bufp = OPENSSL_malloc(len * 2)) == NULL) { |
| bufp = buffer; |
| len = MEM_BUFFER_SIZE; |
| test_printf_stderr("WARNING: these BIGNUMs have been truncated\n"); |
| } |
| |
| if (bn1 != NULL) { |
| m1 = bufp; |
| BN_bn2binpad(bn1, m1, len); |
| } |
| if (bn2 != NULL) { |
| m2 = bufp + len; |
| BN_bn2binpad(bn2, m2, len); |
| } |
| |
| while (len > 0) { |
| cnt = 8 * (len - bytes); |
| n1 = convert_bn_memory(m1, bytes, b1, &lz1, bn1); |
| n2 = convert_bn_memory(m2, bytes, b2, &lz2, bn2); |
| |
| diff = real_diff = 0; |
| i = 0; |
| p = bdiff; |
| for (i=0; b1[i] != '\0'; i++) |
| if (b1[i] == b2[i] || b1[i] == ' ' || b2[i] == ' ') { |
| *p++ = ' '; |
| diff |= b1[i] != b2[i]; |
| } else { |
| *p++ = '^'; |
| real_diff = diff = 1; |
| } |
| *p++ = '\0'; |
| if (!diff) { |
| test_printf_stderr(" %s:% 5d\n", n2 > n1 ? b2 : b1, cnt); |
| } else { |
| if (cnt == 0 && bn1 == NULL) |
| test_printf_stderr("-%s\n", b1); |
| else if (cnt == 0 || n1 > 0) |
| test_printf_stderr("-%s:% 5d\n", b1, cnt); |
| if (cnt == 0 && bn2 == NULL) |
| test_printf_stderr("+%s\n", b2); |
| else if (cnt == 0 || n2 > 0) |
| test_printf_stderr("+%s:% 5d\n", b2, cnt); |
| if (real_diff && (cnt == 0 || (n1 > 0 && n2 > 0)) |
| && bn1 != NULL && bn2 != NULL) |
| test_printf_stderr(" %s\n", bdiff); |
| } |
| if (m1 != NULL) |
| m1 += bytes; |
| if (m2 != NULL) |
| m2 += bytes; |
| len -= bytes; |
| } |
| fin: |
| test_flush_stderr(); |
| if (bufp != buffer) |
| OPENSSL_free(bufp); |
| } |
| |
| /* |
| * Wrapper routines so that the underlying code can be shared. |
| * The first two are calls from inside the test utilities when a conditional |
| * fails. The third is the user's call to dump a bignum. |
| */ |
| void test_fail_bignum_message(const char *prefix, const char *file, |
| int line, const char *type, |
| const char *left, const char *right, |
| const char *op, |
| const BIGNUM *bn1, const BIGNUM *bn2) |
| { |
| test_fail_bignum_common(prefix, file, line, type, left, right, op, bn1, bn2); |
| test_printf_stderr("\n"); |
| } |
| |
| void test_fail_bignum_mono_message(const char *prefix, const char *file, |
| int line, const char *type, |
| const char *left, const char *right, |
| const char *op, const BIGNUM *bn) |
| { |
| test_fail_bignum_common(prefix, file, line, type, left, right, op, bn, bn); |
| test_printf_stderr("\n"); |
| } |
| |
| void test_output_bignum(const char *name, const BIGNUM *bn) |
| { |
| if (bn == NULL || BN_is_zero(bn)) { |
| test_printf_stderr("bignum: '%s' = %s\n", name, |
| test_bignum_zero_null(bn)); |
| } else if (BN_num_bytes(bn) <= BN_OUTPUT_SIZE) { |
| unsigned char buf[BN_OUTPUT_SIZE]; |
| char out[2 * sizeof(buf) + 1]; |
| char *p = out; |
| int n = BN_bn2bin(bn, buf); |
| |
| hex_convert_memory(buf, n, p, BN_OUTPUT_SIZE); |
| while (*p == '0' && *++p != '\0') |
| ; |
| test_printf_stderr("bignum: '%s' = %s0x%s\n", name, |
| BN_is_negative(bn) ? "-" : "", p); |
| } else { |
| test_fail_bignum_common("bignum", NULL, 0, NULL, NULL, NULL, name, |
| bn, bn); |
| } |
| } |
| |
| /* Memory output routines */ |
| |
| /* |
| * Handle zero length blocks of memory or NULL pointers to memory |
| */ |
| static void test_memory_null_empty(const unsigned char *m, char c) |
| { |
| if (m == NULL) |
| test_printf_stderr("%4s %c%s\n", "", c, "NULL"); |
| else |
| test_printf_stderr("%04x %c%s\n", 0u, c, "empty"); |
| } |
| |
| /* |
| * Common code to display one or two blocks of memory. |
| */ |
| static void test_fail_memory_common(const char *prefix, const char *file, |
| int line, const char *type, |
| const char *left, const char *right, |
| const char *op, |
| const unsigned char *m1, size_t l1, |
| const unsigned char *m2, size_t l2) |
| { |
| const size_t bytes = (MAX_STRING_WIDTH - 9) / 17 * 8; |
| char b1[MAX_STRING_WIDTH + 1], b2[MAX_STRING_WIDTH + 1]; |
| char *p, bdiff[MAX_STRING_WIDTH + 1]; |
| size_t n1, n2, i; |
| unsigned int cnt = 0, diff; |
| |
| test_fail_message_prefix(prefix, file, line, type, left, right, op); |
| if (m1 == NULL) |
| l1 = 0; |
| if (m2 == NULL) |
| l2 = 0; |
| if (l1 == 0 && l2 == 0) { |
| if ((m1 == NULL) == (m2 == NULL)) { |
| test_memory_null_empty(m1, ' '); |
| } else { |
| test_diff_header(left, right); |
| test_memory_null_empty(m1, '-'); |
| test_memory_null_empty(m2, '+'); |
| } |
| goto fin; |
| } |
| |
| if (l1 != l2 || (m1 != m2 && memcmp(m1, m2, l1) != 0)) |
| test_diff_header(left, right); |
| |
| while (l1 > 0 || l2 > 0) { |
| n1 = n2 = 0; |
| if (l1 > 0) { |
| n1 = l1 > bytes ? bytes : l1; |
| hex_convert_memory(m1, n1, b1, 8); |
| } |
| if (l2 > 0) { |
| n2 = l2 > bytes ? bytes : l2; |
| hex_convert_memory(m2, n2, b2, 8); |
| } |
| |
| diff = 0; |
| i = 0; |
| p = bdiff; |
| if (n1 > 0 && n2 > 0) { |
| const size_t j = n1 < n2 ? n1 : n2; |
| |
| for (; i < j; i++) { |
| if (m1[i] == m2[i]) { |
| *p++ = ' '; |
| *p++ = ' '; |
| } else { |
| *p++ = '^'; |
| *p++ = '^'; |
| diff = 1; |
| } |
| if (i % 8 == 7 && i != j - 1) |
| *p++ = ' '; |
| } |
| *p++ = '\0'; |
| } |
| |
| if (n1 == n2 && !diff) { |
| test_printf_stderr("%04x: %s\n", cnt, b1); |
| } else { |
| if (cnt == 0 && (m1 == NULL || l1 == 0)) |
| test_memory_null_empty(m1, '-'); |
| else if (n1 > 0) |
| test_printf_stderr("%04x:-%s\n", cnt, b1); |
| if (cnt == 0 && (m2 == NULL || l2 == 0)) |
| test_memory_null_empty(m2, '+'); |
| else if (n2 > 0) |
| test_printf_stderr("%04x:+%s\n", cnt, b2); |
| if (diff && i > 0) |
| test_printf_stderr("%4s %s\n", "", bdiff); |
| } |
| if (m1 != NULL) |
| m1 += n1; |
| if (m2 != NULL) |
| m2 += n2; |
| l1 -= n1; |
| l2 -= n2; |
| cnt += bytes; |
| } |
| fin: |
| test_flush_stderr(); |
| } |
| |
| /* |
| * Wrapper routines so that the underlying code can be shared. |
| * The first is the call from inside the test utilities when a conditional |
| * fails. The second is the user's call to dump memory. |
| */ |
| void test_fail_memory_message(const char *prefix, const char *file, |
| int line, const char *type, |
| const char *left, const char *right, |
| const char *op, |
| const unsigned char *m1, size_t l1, |
| const unsigned char *m2, size_t l2) |
| { |
| test_fail_memory_common(prefix, file, line, type, left, right, op, |
| m1, l1, m2, l2); |
| test_printf_stderr("\n"); |
| } |
| |
| void test_output_memory(const char *name, const unsigned char *m, size_t l) |
| { |
| test_fail_memory_common("memory", NULL, 0, NULL, NULL, NULL, name, |
| m, l, m, l); |
| } |