blob: 7b976c0a1b5e5d371088d21c272aa6b9881f6525 [file] [log] [blame]
#! /usr/bin/env perl
# Copyright 2015-2021 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the Apache License 2.0 (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
use strict;
use warnings;
use OpenSSL::Test qw(:DEFAULT data_file bldtop_dir srctop_file srctop_dir bldtop_file);
use OpenSSL::Test::Utils;
BEGIN {
setup("test_evp");
}
use lib srctop_dir('Configurations');
use lib bldtop_dir('.');
my $no_fips = disabled('fips') || ($ENV{NO_FIPS} // 0);
my $no_legacy = disabled('legacy') || ($ENV{NO_LEGACY} // 0);
my $no_des = disabled("des");
my $no_dh = disabled("dh");
my $no_dsa = disabled("dsa");
my $no_ec = disabled("ec");
my $no_gost = disabled("gost");
my $no_sm2 = disabled("sm2");
# Default config depends on if the legacy module is built or not
my $defaultcnf = $no_legacy ? 'default.cnf' : 'default-and-legacy.cnf';
my @configs = ( $defaultcnf );
# Only add the FIPS config if the FIPS module has been built
push @configs, 'fips-and-base.cnf' unless $no_fips;
# A list of tests that run with both the default and fips provider.
my @files = qw(
evpciph_aes_ccm_cavs.txt
evpciph_aes_common.txt
evpciph_aes_cts.txt
evpciph_aes_wrap.txt
evpciph_aes_stitched.txt
evpciph_des3_common.txt
evpkdf_hkdf.txt
evpkdf_kbkdf_counter.txt
evpkdf_pbkdf1.txt
evpkdf_pbkdf2.txt
evpkdf_ss.txt
evpkdf_ssh.txt
evpkdf_tls12_prf.txt
evpkdf_tls13_kdf.txt
evpkdf_x942.txt
evpkdf_x963.txt
evpmac_common.txt
evpmd_sha.txt
evppbe_pbkdf2.txt
evppkey_kdf_hkdf.txt
evppkey_rsa_common.txt
evprand.txt
);
push @files, qw(
evppkey_ffdhe.txt
evppkey_dh.txt
) unless $no_dh;
push @files, qw(
evpkdf_x942_des.txt
evpmac_cmac_des.txt
) unless $no_des;
push @files, qw(evppkey_dsa.txt) unless $no_dsa;
push @files, qw(evppkey_ecx.txt) unless $no_ec;
push @files, qw(
evppkey_ecc.txt
evppkey_ecdh.txt
evppkey_ecdsa.txt
evppkey_kas.txt
evppkey_mismatch.txt
) unless $no_ec || $no_gost;
# A list of tests that only run with the default provider
# (i.e. The algorithms are not present in the fips provider)
my @defltfiles = qw(
evpciph_aes_ocb.txt
evpciph_aes_siv.txt
evpciph_aria.txt
evpciph_bf.txt
evpciph_camellia.txt
evpciph_camellia_cts.txt
evpciph_cast5.txt
evpciph_chacha.txt
evpciph_des.txt
evpciph_idea.txt
evpciph_rc2.txt
evpciph_rc4.txt
evpciph_rc4_stitched.txt
evpciph_rc5.txt
evpciph_seed.txt
evpciph_sm4.txt
evpencod.txt
evpkdf_krb5.txt
evpkdf_scrypt.txt
evpkdf_tls11_prf.txt
evpmac_blake.txt
evpmac_poly1305.txt
evpmac_siphash.txt
evpmd_blake.txt
evpmd_md.txt
evpmd_mdc2.txt
evpmd_ripemd.txt
evpmd_sm3.txt
evpmd_whirlpool.txt
evppbe_scrypt.txt
evppbe_pkcs12.txt
evppkey_kdf_scrypt.txt
evppkey_kdf_tls1_prf.txt
evppkey_rsa.txt
);
push @defltfiles, qw(evppkey_brainpool.txt) unless $no_ec;
push @defltfiles, qw(evppkey_sm2.txt) unless $no_sm2;
plan tests =>
+ (scalar(@configs) * scalar(@files))
+ scalar(@defltfiles)
+ 3; # error output tests
foreach (@configs) {
my $conf = srctop_file("test", $_);
foreach my $f ( @files ) {
ok(run(test(["evp_test",
"-config", $conf,
data_file("$f")])),
"running evp_test -config $conf $f");
}
}
my $conf = srctop_file("test", $defaultcnf);
foreach my $f ( @defltfiles ) {
ok(run(test(["evp_test",
"-config", $conf,
data_file("$f")])),
"running evp_test -config $conf $f");
}
# test_errors OPTIONS
#
# OPTIONS may include:
#
# key => "filename" # expected to be found in $SRCDIR/test/certs
# out => "filename" # file to write error strings to
# args => [ ... extra openssl pkey args ... ]
# expected => regexps to match error lines against
sub test_errors { # actually tests diagnostics of OSSL_STORE
my %opts = @_;
my $infile = srctop_file('test', 'certs', $opts{key});
my @args = ( qw(openssl pkey -in), $infile, @{$opts{args} // []} );
my $res = !run(app([@args], stderr => $opts{out}));
my $found = !exists $opts{expected};
open(my $in, '<', $opts{out}) or die "Could not open file $opts{out}";
while(my $errline = <$in>) {
print $errline; # this may help debugging
# output must not include ASN.1 parse errors
$res &&= $errline !~ m/asn1 encoding/;
# output must include what is expressed in $opts{$expected}
$found = 1
if exists $opts{expected} && $errline =~ m/$opts{expected}/;
}
close $in;
# $tmpfile is kept to help with investigation in case of failure
return $res && $found;
}
SKIP: {
skip "DSA not disabled", 2 if !disabled("dsa");
ok(test_errors(key => 'server-dsa-key.pem',
out => 'server-dsa-key.err'),
"expected error loading unsupported dsa private key");
ok(test_errors(key => 'server-dsa-pubkey.pem',
out => 'server-dsa-pubkey.err',
args => [ '-pubin' ],
expected => 'unsupported'),
"expected error loading unsupported dsa public key");
}
SKIP: {
skip "SM2 not disabled", 1 if !disabled("sm2");
ok(test_errors(key => 'sm2.key', out => 'sm2.err'),
"expected error loading unsupported sm2 private key");
}