| OPENSSL INSTALLATION | |
| -------------------- | |
| This document describes installation on all supported operating | |
| systems (the Linux/Unix family, OpenVMS and Windows) | |
| To install OpenSSL, you will need: | |
| * A make implementation | |
| * Perl 5 with core modules (please read NOTES.PERL) | |
| * The perl module Text::Template (please read NOTES.PERL) | |
| * an ANSI C compiler | |
| * a development environment in the form of development libraries and C | |
| header files | |
| * a supported operating system | |
| For additional platform specific requirements, solutions to specific | |
| issues and other details, please read one of these: | |
| * NOTES.VMS (OpenVMS) | |
| * NOTES.WIN (any supported Windows) | |
| * NOTES.DJGPP (DOS platform with DJGPP) | |
| Notational conventions in this document | |
| --------------------------------------- | |
| Throughout this document, we use the following conventions in command | |
| examples: | |
| $ command Any line starting with a dollar sign | |
| ($) is a command line. | |
| { word1 | word2 | word3 } This denotes a mandatory choice, to be | |
| replaced with one of the given words. | |
| A simple example would be this: | |
| $ echo { FOO | BAR | COOKIE } | |
| which is to be understood as one of | |
| these: | |
| $ echo FOO | |
| - or - | |
| $ echo BAR | |
| - or - | |
| $ echo COOKIE | |
| [ word1 | word2 | word3 ] Similar to { word1 | word2 | word3 } | |
| except it's optional to give any of | |
| those. In addition to the examples | |
| above, this would also be valid: | |
| $ echo | |
| {{ target }} This denotes a mandatory word or | |
| sequence of words of some sort. A | |
| simple example would be this: | |
| $ type {{ filename }} | |
| which is to be understood to use the | |
| command 'type' on some file name | |
| determined by the user. | |
| [[ options ]] Similar to {{ target }}, but is | |
| optional. | |
| Note that the notation assumes spaces around {, }, [, ], {{, }} and | |
| [[, ]]. This is to differentiate from OpenVMS directory | |
| specifications, which also use [ and ], but without spaces. | |
| Quick Start | |
| ----------- | |
| If you want to just get on with it, do: | |
| on Unix: | |
| $ ./config | |
| $ make | |
| $ make test | |
| $ make install | |
| on OpenVMS: | |
| $ @config | |
| $ mms | |
| $ mms test | |
| $ mms install | |
| on Windows (only pick one of the targets for configuration): | |
| $ perl Configure { VC-WIN32 | VC-WIN64A | VC-WIN64I | VC-CE } | |
| $ nmake | |
| $ nmake test | |
| $ nmake install | |
| If any of these steps fails, see section Installation in Detail below. | |
| This will build and install OpenSSL in the default location, which is: | |
| Unix: normal installation directories under /usr/local | |
| OpenVMS: SYS$COMMON:[OPENSSL-'version'...], where 'version' is the | |
| OpenSSL version number with underscores instead of periods. | |
| Windows: C:\Program Files\OpenSSL or C:\Program Files (x86)\OpenSSL | |
| If you want to install it anywhere else, run config like this: | |
| On Unix: | |
| $ ./config --prefix=/opt/openssl --openssldir=/usr/local/ssl | |
| On OpenVMS: | |
| $ @config --prefix=PROGRAM:[INSTALLS] --openssldir=SYS$MANAGER:[OPENSSL] | |
| Configuration Options | |
| --------------------- | |
| There are several options to ./config (or ./Configure) to customize | |
| the build (note that for Windows, the defaults for --prefix and | |
| --openssldir depend in what configuration is used and what Windows | |
| implementation OpenSSL is built on. More notes on this in NOTES.WIN): | |
| --api=x.y.z | |
| Don't build with support for deprecated APIs below the | |
| specified version number. For example "--api=1.1.0" will | |
| remove support for all APIS that were deprecated in OpenSSL | |
| version 1.1.0 or below. | |
| --cross-compile-prefix=PREFIX | |
| The PREFIX to include in front of commands for your | |
| toolchain. It's likely to have to end with dash, e.g. | |
| a-b-c- would invoke GNU compiler as a-b-c-gcc, etc. | |
| Unfortunately cross-compiling is too case-specific to | |
| put together one-size-fits-all instructions. You might | |
| have to pass more flags or set up environment variables | |
| to actually make it work. Android and iOS cases are | |
| discussed in corresponding Configurations/10-main.cf | |
| sections. But there are cases when this option alone is | |
| sufficient. For example to build the mingw64 target on | |
| Linux "--cross-compile-prefix=x86_64-w64-mingw32-" | |
| works. Naturally provided that mingw packages are | |
| installed. Today Debian and Ubuntu users have option to | |
| install a number of prepackaged cross-compilers along | |
| with corresponding run-time and development packages for | |
| "alien" hardware. To give another example | |
| "--cross-compile-prefix=mipsel-linux-gnu-" suffices | |
| in such case. Needless to mention that you have to | |
| invoke ./Configure, not ./config, and pass your target | |
| name explicitly. | |
| --debug | |
| Build OpenSSL with debugging symbols. | |
| --libdir=DIR | |
| The name of the directory under the top of the installation | |
| directory tree (see the --prefix option) where libraries will | |
| be installed. By default this is "lib". Note that on Windows | |
| only ".lib" files will be stored in this location. dll files | |
| will always be installed to the "bin" directory. | |
| --openssldir=DIR | |
| Directory for OpenSSL configuration files, and also the | |
| default certificate and key store. Defaults are: | |
| Unix: /usr/local/ssl | |
| Windows: C:\Program Files\Common Files\SSL | |
| or C:\Program Files (x86)\Common Files\SSL | |
| OpenVMS: SYS$COMMON:[OPENSSL-COMMON] | |
| --prefix=DIR | |
| The top of the installation directory tree. Defaults are: | |
| Unix: /usr/local | |
| Windows: C:\Program Files\OpenSSL | |
| or C:\Program Files (x86)\OpenSSL | |
| OpenVMS: SYS$COMMON:[OPENSSL-'version'] | |
| --release | |
| Build OpenSSL without debugging symbols. This is the default. | |
| --strict-warnings | |
| This is a developer flag that switches on various compiler | |
| options recommended for OpenSSL development. It only works | |
| when using gcc or clang as the compiler. If you are | |
| developing a patch for OpenSSL then it is recommended that | |
| you use this option where possible. | |
| --with-zlib-include=DIR | |
| The directory for the location of the zlib include file. This | |
| option is only necessary if enable-zlib (see below) is used | |
| and the include file is not already on the system include | |
| path. | |
| --with-zlib-lib=LIB | |
| On Unix: this is the directory containing the zlib library. | |
| If not provided the system library path will be used. | |
| On Windows: this is the filename of the zlib library (with or | |
| without a path). This flag must be provided if the | |
| zlib-dynamic option is not also used. If zlib-dynamic is used | |
| then this flag is optional and a default value ("ZLIB1") is | |
| used if not provided. | |
| On VMS: this is the filename of the zlib library (with or | |
| without a path). This flag is optional and if not provided | |
| then "GNV$LIBZSHR", "GNV$LIBZSHR32" or "GNV$LIBZSHR64" is | |
| used by default depending on the pointer size chosen. | |
| no-afalgeng | |
| Don't build the AFALG engine. This option will be forced if | |
| on a platform that does not support AFALG. | |
| enable-asan | |
| Build with the Address sanitiser. This is a developer option | |
| only. It may not work on all platforms and should never be | |
| used in production environments. It will only work when used | |
| with gcc or clang and should be used in conjunction with the | |
| no-shared option. | |
| no-asm | |
| Do not use assembler code. On some platforms a small amount | |
| of assembler code may still be used. | |
| no-async | |
| Do not build support for async operations. | |
| no-autoalginit | |
| Don't automatically load all supported ciphers and digests. | |
| Typically OpenSSL will make available all of its supported | |
| ciphers and digests. For a statically linked application this | |
| may be undesirable if small executable size is an objective. | |
| This only affects libcrypto. Ciphers and digests will have to | |
| be loaded manually using EVP_add_cipher() and | |
| EVP_add_digest() if this option is used. This option will | |
| force a non-shared build. | |
| no-autoerrinit | |
| Don't automatically load all libcrypto/libssl error strings. | |
| Typically OpenSSL will automatically load human readable | |
| error strings. For a statically linked application this may | |
| be undesirable if small executable size is an objective. | |
| no-capieng | |
| Don't build the CAPI engine. This option will be forced if | |
| on a platform that does not support CAPI. | |
| no-cms | |
| Don't build support for CMS features | |
| no-comp | |
| Don't build support for SSL/TLS compression. If this option | |
| is left enabled (the default), then compression will only | |
| work if the zlib or zlib-dynamic options are also chosen. | |
| enable-crypto-mdebug | |
| Build support for debugging memory allocated via | |
| OPENSSL_malloc() or OPENSSL_zalloc(). | |
| enable-crypto-mdebug-backtrace | |
| As for crypto-mdebug, but additionally provide backtrace | |
| information for allocated memory. | |
| TO BE USED WITH CARE: this uses GNU C functionality, and | |
| is therefore not usable for non-GNU config targets. If | |
| your build complains about the use of '-rdynamic' or the | |
| lack of header file execinfo.h, this option is not for you. | |
| ALSO NOTE that even though execinfo.h is available on your | |
| system (through Gnulib), the functions might just be stubs | |
| that do nothing. | |
| no-ct | |
| Don't build support for Certificate Transparency. | |
| no-deprecated | |
| Don't build with support for any deprecated APIs. This is the | |
| same as using "--api" and supplying the latest version | |
| number. | |
| no-dgram | |
| Don't build support for datagram based BIOs. Selecting this | |
| option will also force the disabling of DTLS. | |
| no-dso | |
| Don't build support for loading Dynamic Shared Objects. | |
| no-dynamic-engine | |
| Don't build the dynamically loaded engines. This only has an | |
| effect in a "shared" build | |
| no-ec | |
| Don't build support for Elliptic Curves. | |
| no-ec2m | |
| Don't build support for binary Elliptic Curves | |
| enable-ec_nistp_64_gcc_128 | |
| Enable support for optimised implementations of some commonly | |
| used NIST elliptic curves. This is only supported on some | |
| platforms. | |
| enable-egd | |
| Build support for gathering entropy from EGD (Entropy | |
| Gathering Daemon). | |
| no-engine | |
| Don't build support for loading engines. | |
| no-err | |
| Don't compile in any error strings. | |
| no-filenames | |
| Don't compile in filename and line number information (e.g. | |
| for errors and memory allocation). | |
| enable-fuzz-libfuzzer, enable-fuzz-afl | |
| Build with support for fuzzing using either libfuzzer or AFL. | |
| These are developer options only. They may not work on all | |
| platforms and should never be used in production environments. | |
| See the file fuzz/README.md for further details. | |
| no-gost | |
| Don't build support for GOST based ciphersuites. Note that | |
| if this feature is enabled then GOST ciphersuites are only | |
| available if the GOST algorithms are also available through | |
| loading an externally supplied engine. | |
| enable-heartbeats | |
| Build support for DTLS heartbeats. | |
| no-hw-padlock | |
| Don't build the padlock engine. | |
| no-makedepend | |
| Don't generate dependencies. | |
| no-multiblock | |
| Don't build support for writing multiple records in one | |
| go in libssl (Note: this is a different capability to the | |
| pipelining functionality). | |
| no-nextprotoneg | |
| Don't build support for the NPN TLS extension. | |
| no-ocsp | |
| Don't build support for OCSP. | |
| no-pic | |
| Don't build with support for Position Independent Code. | |
| no-posix-io | |
| Don't use POSIX IO capabilities. | |
| no-psk | |
| Don't build support for Pre-Shared Key based ciphersuites. | |
| no-rdrand | |
| Don't use hardware RDRAND capabilities. | |
| no-rfc3779 | |
| Don't build support for RFC3779 ("X.509 Extensions for IP | |
| Addresses and AS Identifiers") | |
| sctp | |
| Build support for SCTP | |
| no-shared | |
| Do not create shared libraries, only static ones. See "Note | |
| on shared libraries" below. | |
| no-sock | |
| Don't build support for socket BIOs | |
| no-srp | |
| Don't build support for SRP or SRP based ciphersuites. | |
| no-srtp | |
| Don't build SRTP support | |
| no-sse2 | |
| Exclude SSE2 code paths. Normally SSE2 extension is | |
| detected at run-time, but the decision whether or not the | |
| machine code will be executed is taken solely on CPU | |
| capability vector. This means that if you happen to run OS | |
| kernel which does not support SSE2 extension on Intel P4 | |
| processor, then your application might be exposed to | |
| "illegal instruction" exception. There might be a way | |
| to enable support in kernel, e.g. FreeBSD kernel can be | |
| compiled with CPU_ENABLE_SSE, and there is a way to | |
| disengage SSE2 code paths upon application start-up, | |
| but if you aim for wider "audience" running such kernel, | |
| consider no-sse2. Both the 386 and no-asm options imply | |
| no-sse2. | |
| enable-ssl-trace | |
| Build with the SSL Trace capabilities (adds the "-trace" | |
| option to s_client and s_server). | |
| no-static-engine | |
| Don't build the statically linked engines. This only | |
| has an impact when not built "shared". | |
| no-stdio | |
| Don't use any C "stdio" features. Only libcrypto and libssl | |
| can be built in this way. Using this option will suppress | |
| building the command line applications. Additionally since | |
| the OpenSSL tests also use the command line applications the | |
| tests will also be skipped. | |
| no-threads | |
| Don't try to build with support for multi-threaded | |
| applications. | |
| threads | |
| Build with support for multi-threaded applications. Most | |
| platforms will enable this by default. However if on a | |
| platform where this is not the case then this will usually | |
| require additional system-dependent options! See "Note on | |
| multi-threading" below. | |
| no-ts | |
| Don't build Time Stamping Authority support. | |
| enable-ubsan | |
| Build with the Undefined Behaviour sanitiser. This is a | |
| developer option only. It may not work on all platforms and | |
| should never be used in production environments. It will only | |
| work when used with gcc or clang and should be used in | |
| conjunction with the "-DPEDANTIC" option (or the | |
| --strict-warnings option). | |
| no-ui | |
| Don't build with the "UI" capability (i.e. the set of | |
| features enabling text based prompts). | |
| enable-unit-test | |
| Enable additional unit test APIs. This should not typically | |
| be used in production deployments. | |
| enable-weak-ssl-ciphers | |
| Build support for SSL/TLS ciphers that are considered "weak" | |
| (e.g. RC4 based ciphersuites). | |
| zlib | |
| Build with support for zlib compression/decompression. | |
| zlib-dynamic | |
| Like "zlib", but has OpenSSL load the zlib library | |
| dynamically when needed. This is only supported on systems | |
| where loading of shared libraries is supported. | |
| 386 | |
| On Intel hardware, use the 80386 instruction set only | |
| (the default x86 code is more efficient, but requires at | |
| least a 486). Note: Use compiler flags for any other CPU | |
| specific configuration, e.g. "-m32" to build x86 code on | |
| an x64 system. | |
| no-<prot> | |
| Don't build support for negotiating the specified SSL/TLS | |
| protocol (one of ssl, ssl3, tls, tls1, tls1_1, tls1_2, dtls, | |
| dtls1 or dtls1_2). If "no-tls" is selected then all of tls1, | |
| tls1_1 and tls1_2 are disabled. Similarly "no-dtls" will | |
| disable dtls1 and dtls1_2. The "no-ssl" option is synonymous | |
| with "no-ssl3". Note this only affects version negotiation. | |
| OpenSSL will still provide the methods for applications to | |
| explicitly select the individual protocol versions. | |
| no-<prot>-method | |
| As for no-<prot> but in addition do not build the methods for | |
| applications to explicitly select individual protocol | |
| versions. | |
| enable-<alg> | |
| Build with support for the specified algorithm, where <alg> | |
| is one of: md2 or rc5. | |
| no-<alg> | |
| Build without support for the specified algorithm, where | |
| <alg> is one of: bf, blake2, camellia, cast, chacha, cmac, | |
| des, dh, dsa, ecdh, ecdsa, idea, md4, md5, mdc2, ocb, | |
| ploy1305, rc2, rc4, rmd160, scrypt, seed or whirlpool. The | |
| "ripemd" algorithm is deprecated and if used is synonymous | |
| with rmd160. | |
| -Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx | |
| These system specific options will be passed through to the | |
| compiler to allow you to define preprocessor symbols, specify | |
| additional libraries, library directories or other compiler | |
| options. | |
| Installation in Detail | |
| ---------------------- | |
| 1a. Configure OpenSSL for your operation system automatically: | |
| NOTE: This is not available on Windows. | |
| $ ./config [[ options ]] # Unix | |
| or | |
| $ @config [[ options ]] ! OpenVMS | |
| For the remainder of this text, the Unix form will be used in all | |
| examples, please use the appropriate form for your platform. | |
| This guesses at your operating system (and compiler, if necessary) and | |
| configures OpenSSL based on this guess. Run ./config -t to see | |
| if it guessed correctly. If you want to use a different compiler, you | |
| are cross-compiling for another platform, or the ./config guess was | |
| wrong for other reasons, go to step 1b. Otherwise go to step 2. | |
| On some systems, you can include debugging information as follows: | |
| $ ./config -d [[ options ]] | |
| 1b. Configure OpenSSL for your operating system manually | |
| OpenSSL knows about a range of different operating system, hardware and | |
| compiler combinations. To see the ones it knows about, run | |
| $ ./Configure # Unix | |
| or | |
| $ perl Configure # All other platforms | |
| For the remainder of this text, the Unix form will be used in all | |
| examples, please use the appropriate form for your platform. | |
| Pick a suitable name from the list that matches your system. For most | |
| operating systems there is a choice between using "cc" or "gcc". When | |
| you have identified your system (and if necessary compiler) use this name | |
| as the argument to Configure. For example, a "linux-elf" user would | |
| run: | |
| $ ./Configure linux-elf [[ options ]] | |
| If your system isn't listed, you will have to create a configuration | |
| file named Configurations/{{ something }}.conf and add the correct | |
| configuration for your system. See the available configs as examples | |
| and read Configurations/README and Configurations/README.design for | |
| more information. | |
| The generic configurations "cc" or "gcc" should usually work on 32 bit | |
| Unix-like systems. | |
| Configure creates a build file ("Makefile" on Unix, "makefile" on Windows | |
| and "descrip.mms" on OpenVMS) from a suitable template in Configurations, | |
| and defines various macros in include/openssl/opensslconf.h (generated from | |
| include/openssl/opensslconf.h.in). | |
| 1c. Configure OpenSSL for building outside of the source tree. | |
| OpenSSL can be configured to build in a build directory separate from | |
| the directory with the source code. It's done by placing yourself in | |
| some other directory and invoking the configuration commands from | |
| there. | |
| Unix example: | |
| $ mkdir /var/tmp/openssl-build | |
| $ cd /var/tmp/openssl-build | |
| $ /PATH/TO/OPENSSL/SOURCE/config [[ options ]] | |
| or | |
| $ /PATH/TO/OPENSSL/SOURCE/Configure {{ target }} [[ options ]] | |
| OpenVMS example: | |
| $ set default sys$login: | |
| $ create/dir [.tmp.openssl-build] | |
| $ set default [.tmp.openssl-build] | |
| $ @[PATH.TO.OPENSSL.SOURCE]config [[ options ]] | |
| or | |
| $ @[PATH.TO.OPENSSL.SOURCE]Configure {{ target }} [[ options ]] | |
| Windows example: | |
| $ C: | |
| $ mkdir \temp-openssl | |
| $ cd \temp-openssl | |
| $ perl d:\PATH\TO\OPENSSL\SOURCE\Configure {{ target }} [[ options ]] | |
| Paths can be relative just as well as absolute. Configure will | |
| do its best to translate them to relative paths whenever possible. | |
| 2. Build OpenSSL by running: | |
| $ make # Unix | |
| $ mms ! (or mmk) OpenVMS | |
| $ nmake # Windows | |
| This will build the OpenSSL libraries (libcrypto.a and libssl.a on | |
| Unix, corresponding on other platforms) and the OpenSSL binary | |
| ("openssl"). The libraries will be built in the top-level directory, | |
| and the binary will be in the "apps" subdirectory. | |
| If the build fails, look at the output. There may be reasons for | |
| the failure that aren't problems in OpenSSL itself (like missing | |
| standard headers). If you are having problems you can get help by | |
| sending an email to the openssl-users email list (see | |
| https://www.openssl.org/community/mailinglists.html for details). If it | |
| is a bug with OpenSSL itself, please report the problem to | |
| <rt@openssl.org> (note that your message will be recorded in the request | |
| tracker publicly readable at | |
| https://www.openssl.org/community/index.html#bugs and will be | |
| forwarded to a public mailing list). Please check out the request | |
| tracker. Maybe the bug was already reported or has already been | |
| fixed. | |
| (If you encounter assembler error messages, try the "no-asm" | |
| configuration option as an immediate fix.) | |
| Compiling parts of OpenSSL with gcc and others with the system | |
| compiler will result in unresolved symbols on some systems. | |
| 3. After a successful build, the libraries should be tested. Run: | |
| $ make test # Unix | |
| $ mms test ! OpenVMS | |
| $ nmake test # Windows | |
| NOTE: you MUST run the tests from an unprivileged account (or | |
| disable your privileges temporarily if your platform allows it). | |
| If some tests fail, look at the output. There may be reasons for | |
| the failure that isn't a problem in OpenSSL itself (like a | |
| malfunction with Perl). You may want increased verbosity, that | |
| can be accomplished like this: | |
| $ make VERBOSE=1 test # Unix | |
| $ mms /macro=(VERBOSE=1) test ! OpenVMS | |
| $ nmake VERBOSE=1 test # Windows | |
| If you want to run just one or a few specific tests, you can use | |
| the make variable TESTS to specify them, like this: | |
| $ make TESTS='test_rsa test_dsa' test # Unix | |
| $ mms/macro="TESTS=test_rsa test_dsa" test ! OpenVMS | |
| $ nmake TESTS='test_rsa test_dsa' test # Windows | |
| And of course, you can combine (Unix example shown): | |
| $ make VERBOSE=1 TESTS='test_rsa test_dsa' test | |
| You can find the list of available tests like this: | |
| $ make list-tests # Unix | |
| $ mms list-tests ! OpenVMS | |
| $ nmake list-tests # Windows | |
| Have a look at the manual for the perl module Test::Harness to | |
| see what other HARNESS_* variables there are. | |
| If you find a problem with OpenSSL itself, try removing any | |
| compiler optimization flags from the CFLAGS line in Makefile and | |
| run "make clean; make" or corresponding. | |
| Please send bug reports to <rt@openssl.org>. | |
| 4. If everything tests ok, install OpenSSL with | |
| $ make install # Unix | |
| $ mms install ! OpenVMS | |
| $ nmake install # Windows | |
| This will install all the software components in this directory | |
| tree under PREFIX (the directory given with --prefix or its | |
| default): | |
| Unix: | |
| bin/ Contains the openssl binary and a few other | |
| utility scripts. | |
| include/openssl | |
| Contains the header files needed if you want | |
| to build your own programs that use libcrypto | |
| or libssl. | |
| lib Contains the OpenSSL library files. | |
| lib/engines Contains the OpenSSL dynamically loadable engines. | |
| share/man/man1 Contains the OpenSSL command line man-pages. | |
| share/man/man3 Contains the OpenSSL library calls man-pages. | |
| share/man/man5 Contains the OpenSSL configuration format man-pages. | |
| share/man/man7 Contains the OpenSSL other misc man-pages. | |
| share/doc/openssl/html/man1 | |
| share/doc/openssl/html/man3 | |
| share/doc/openssl/html/man5 | |
| share/doc/openssl/html/man7 | |
| Contains the HTML rendition of the man-pages. | |
| OpenVMS ('arch' is replaced with the architecture name, "Alpha" | |
| or "ia64", 'sover' is replaced with the shared library version | |
| (0101 for 1.1), and 'pz' is replaced with the pointer size | |
| OpenSSL was built with): | |
| [.EXE.'arch'] Contains the openssl binary. | |
| [.EXE] Contains a few utility scripts. | |
| [.include.openssl] | |
| Contains the header files needed if you want | |
| to build your own programs that use libcrypto | |
| or libssl. | |
| [.LIB.'arch'] Contains the OpenSSL library files. | |
| [.ENGINES'sover''pz'.'arch'] | |
| Contains the OpenSSL dynamically loadable engines. | |
| [.SYS$STARTUP] Contains startup, login and shutdown scripts. | |
| These define appropriate logical names and | |
| command symbols. | |
| [.SYSTEST] Contains the installation verification procedure. | |
| [.HTML] Contains the HTML rendition of the manual pages. | |
| Additionally, install will add the following directories under | |
| OPENSSLDIR (the directory given with --openssldir or its default) | |
| for you convenience: | |
| certs Initially empty, this is the default location | |
| for certificate files. | |
| private Initially empty, this is the default location | |
| for private key files. | |
| misc Various scripts. | |
| Package builders who want to configure the library for standard | |
| locations, but have the package installed somewhere else so that | |
| it can easily be packaged, can use | |
| $ make DESTDIR=/tmp/package-root install # Unix | |
| $ mms/macro="DESTDIR=TMP:[PACKAGE-ROOT]" install ! OpenVMS | |
| The specified destination directory will be prepended to all | |
| installation target paths. | |
| Compatibility issues with previous OpenSSL versions: | |
| * COMPILING existing applications | |
| OpenSSL 1.1.0 hides a number of structures that were previously | |
| open. This includes all internal libssl structures and a number | |
| of EVP types. Accessor functions have been added to allow | |
| controlled access to the structures' data. | |
| This means that some software needs to be rewritten to adapt to | |
| the new ways of doing things. This often amounts to allocating | |
| an instance of a structure explicitly where you could previously | |
| allocate them on the stack as automatic variables, and using the | |
| provided accessor functions where you would previously access a | |
| structure's field directly. | |
| Some APIs have changed as well. However, older APIs have been | |
| preserved when possible. | |
| Environment Variables | |
| --------------------- | |
| A number of environment variables can be used to provide additional control | |
| over the build process. Typically these should be defined prior to running | |
| config or Configure. Not all environment variables are relevant to all | |
| platforms. | |
| AR | |
| The name of the ar executable to use. | |
| CC | |
| The compiler to use. Configure will attempt to pick a default | |
| compiler for your platform but this choice can be overridden | |
| using this variable. Set it to the compiler executable you wish | |
| to use, e.g. "gcc" or "clang". | |
| CROSS_COMPILE | |
| This environment variable has the same meaning as for the | |
| "--cross-compile-prefix" Configure flag described above. If both | |
| are set then the Configure flag takes precedence. | |
| NM | |
| The name of the nm executable to use. | |
| OPENSSL_LOCAL_CONFIG_DIR | |
| OpenSSL comes with a database of information about how it | |
| should be built on different platforms. This information is | |
| held in ".conf" files in the Configurations directory. See the | |
| file Configurations/README for further information about the | |
| format of ".conf" files. As well as the standard ".conf" files | |
| it is possible to create your own ".conf" files and store them | |
| locally, outside the OpenSSL source tree. This environment | |
| variable can be set to the directory where these files are held. | |
| PERL | |
| The name of the Perl executable to use when building OpenSSL. | |
| HASHBANGPERL | |
| The command string for the Perl executable to insert in the | |
| #! line of perl scripts that will be publically installed. | |
| Default: /usr/bin/env perl | |
| Note: the value of this variable is added to the same scripts | |
| on all platforms, but it's only relevant on Unix-like platforms. | |
| RC | |
| The name of the rc executable to use. The default will be as | |
| defined for the target platform in the ".conf" file. If not | |
| defined then "windres" will be used. The WINDRES environment | |
| variable is synonymous to this. If both are defined then RC | |
| takes precedence. | |
| RANLIB | |
| The name of the ranlib executable to use. | |
| WINDRES | |
| See RC. | |
| Makefile targets | |
| ---------------- | |
| The Configure script generates a Makefile in a format relevant to the specific | |
| platform. The Makefiles provide a number of targets that can be used. Not all | |
| targets may be available on all platforms. Only the most common targets are | |
| described here. Examine the Makefiles themselves for the full list. | |
| all | |
| The default target to build all the software components. | |
| clean | |
| Remove all build artefacts and return the directory to a "clean" | |
| state. | |
| depend | |
| Rebuild the dependencies in the Makefiles. This is a legacy | |
| option that no longer needs to be used in OpenSSL 1.1.0. | |
| install | |
| Install all OpenSSL components. | |
| install_sw | |
| Only install the OpenSSL software components. | |
| install_docs | |
| Only install the OpenSSL documentation components. | |
| install_man_docs | |
| Only install the OpenSSL man pages (Unix only). | |
| install_html_docs | |
| Only install the OpenSSL html documentation. | |
| list-tests | |
| Prints a list of all the self test names. | |
| test | |
| Build and run the OpenSSL self tests. | |
| uninstall | |
| Uninstall all OpenSSL components. | |
| update | |
| This is a developer option. If you are developing a patch for | |
| OpenSSL you may need to use this if you want to update | |
| automatically generated files; add new error codes or add new | |
| (or change the visibility of) public API functions. (Unix only). | |
| Note on multi-threading | |
| ----------------------- | |
| For some systems, the OpenSSL Configure script knows what compiler options | |
| are needed to generate a library that is suitable for multi-threaded | |
| applications. On these systems, support for multi-threading is enabled | |
| by default; use the "no-threads" option to disable (this should never be | |
| necessary). | |
| On other systems, to enable support for multi-threading, you will have | |
| to specify at least two options: "threads", and a system-dependent option. | |
| (The latter is "-D_REENTRANT" on various systems.) The default in this | |
| case, obviously, is not to include support for multi-threading (but | |
| you can still use "no-threads" to suppress an annoying warning message | |
| from the Configure script.) | |
| OpenSSL provides built-in support for two threading models: pthreads (found on | |
| most UNIX/Linux systems), and Windows threads. No other threading models are | |
| supported. If your platform does not provide pthreads or Windows threads then | |
| you should Configure with the "no-threads" option. | |
| Note on shared libraries | |
| ------------------------ | |
| For most systems the OpenSSL Configure script knows what is needed to | |
| build shared libraries for libcrypto and libssl. On these systems | |
| the shared libraries will be created by default. This can be suppressed and | |
| only static libraries created by using the "no-shared" option. On systems | |
| where OpenSSL does not know how to build shared libraries the "no-shared" | |
| option will be forced and only static libraries will be created. | |
| Note on random number generation | |
| -------------------------------- | |
| Availability of cryptographically secure random numbers is required for | |
| secret key generation. OpenSSL provides several options to seed the | |
| internal PRNG. If not properly seeded, the internal PRNG will refuse | |
| to deliver random bytes and a "PRNG not seeded error" will occur. | |
| On systems without /dev/urandom (or similar) device, it may be necessary | |
| to install additional support software to obtain a random seed. | |
| Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(), | |
| and the FAQ for more information. | |