| /* |
| * Copyright 2019-2022 The OpenSSL Project Authors. All Rights Reserved. |
| * |
| * Licensed under the Apache License 2.0 (the "License"). You may not use |
| * this file except in compliance with the License. You can obtain a copy |
| * in the file LICENSE in the source distribution or at |
| * https://www.openssl.org/source/license.html |
| */ |
| |
| #include <openssl/core_names.h> |
| #include "internal/cryptlib.h" |
| #include "internal/nelem.h" |
| #include "crypto/evp.h" |
| #include "internal/core.h" |
| #include "internal/provider.h" |
| #include "evp_local.h" |
| |
| /* |
| * match_type() checks if two EVP_KEYMGMT are matching key types. This |
| * function assumes that the caller has made all the necessary NULL checks. |
| */ |
| static int match_type(const EVP_KEYMGMT *keymgmt1, const EVP_KEYMGMT *keymgmt2) |
| { |
| const char *name2 = EVP_KEYMGMT_get0_name(keymgmt2); |
| |
| return EVP_KEYMGMT_is_a(keymgmt1, name2); |
| } |
| |
| int evp_keymgmt_util_try_import(const OSSL_PARAM params[], void *arg) |
| { |
| struct evp_keymgmt_util_try_import_data_st *data = arg; |
| int delete_on_error = 0; |
| |
| /* Just in time creation of keydata */ |
| if (data->keydata == NULL) { |
| if ((data->keydata = evp_keymgmt_newdata(data->keymgmt)) == NULL) { |
| ERR_raise(ERR_LIB_EVP, ERR_R_MALLOC_FAILURE); |
| return 0; |
| } |
| delete_on_error = 1; |
| } |
| |
| /* |
| * It's fine if there was no data to transfer, we just end up with an |
| * empty destination key. |
| */ |
| if (params[0].key == NULL) |
| return 1; |
| |
| if (evp_keymgmt_import(data->keymgmt, data->keydata, data->selection, |
| params)) |
| return 1; |
| if (delete_on_error) { |
| evp_keymgmt_freedata(data->keymgmt, data->keydata); |
| data->keydata = NULL; |
| } |
| return 0; |
| } |
| |
| int evp_keymgmt_util_assign_pkey(EVP_PKEY *pkey, EVP_KEYMGMT *keymgmt, |
| void *keydata) |
| { |
| if (pkey == NULL || keymgmt == NULL || keydata == NULL |
| || !EVP_PKEY_set_type_by_keymgmt(pkey, keymgmt)) { |
| ERR_raise(ERR_LIB_EVP, ERR_R_INTERNAL_ERROR); |
| return 0; |
| } |
| pkey->keydata = keydata; |
| evp_keymgmt_util_cache_keyinfo(pkey); |
| return 1; |
| } |
| |
| EVP_PKEY *evp_keymgmt_util_make_pkey(EVP_KEYMGMT *keymgmt, void *keydata) |
| { |
| EVP_PKEY *pkey = NULL; |
| |
| if (keymgmt == NULL |
| || keydata == NULL |
| || (pkey = EVP_PKEY_new()) == NULL |
| || !evp_keymgmt_util_assign_pkey(pkey, keymgmt, keydata)) { |
| EVP_PKEY_free(pkey); |
| return NULL; |
| } |
| return pkey; |
| } |
| |
| int evp_keymgmt_util_export(const EVP_PKEY *pk, int selection, |
| OSSL_CALLBACK *export_cb, void *export_cbarg) |
| { |
| if (pk == NULL || export_cb == NULL) |
| return 0; |
| return evp_keymgmt_export(pk->keymgmt, pk->keydata, selection, |
| export_cb, export_cbarg); |
| } |
| |
| void *evp_keymgmt_util_export_to_provider(EVP_PKEY *pk, EVP_KEYMGMT *keymgmt) |
| { |
| struct evp_keymgmt_util_try_import_data_st import_data; |
| OP_CACHE_ELEM *op; |
| |
| /* Export to where? */ |
| if (keymgmt == NULL) |
| return NULL; |
| |
| /* If we have an unassigned key, give up */ |
| if (pk->keydata == NULL) |
| return NULL; |
| |
| /* |
| * If |keymgmt| matches the "origin" |keymgmt|, there is no more to do. |
| * The "origin" is determined by the |keymgmt| pointers being identical |
| * or when the provider and the name ID match. The latter case handles the |
| * situation where the fetch cache is flushed and a "new" key manager is |
| * created. |
| */ |
| if (pk->keymgmt == keymgmt |
| || (pk->keymgmt->name_id == keymgmt->name_id |
| && pk->keymgmt->prov == keymgmt->prov)) |
| return pk->keydata; |
| |
| if (!CRYPTO_THREAD_read_lock(pk->lock)) |
| return NULL; |
| /* |
| * If the provider native "origin" hasn't changed since last time, we |
| * try to find our keymgmt in the operation cache. If it has changed |
| * and our keymgmt isn't found, we will clear the cache further down. |
| */ |
| if (pk->dirty_cnt == pk->dirty_cnt_copy) { |
| /* If this key is already exported to |keymgmt|, no more to do */ |
| op = evp_keymgmt_util_find_operation_cache(pk, keymgmt); |
| if (op != NULL && op->keymgmt != NULL) { |
| void *ret = op->keydata; |
| |
| CRYPTO_THREAD_unlock(pk->lock); |
| return ret; |
| } |
| } |
| CRYPTO_THREAD_unlock(pk->lock); |
| |
| /* If the "origin" |keymgmt| doesn't support exporting, give up */ |
| if (pk->keymgmt->export == NULL) |
| return NULL; |
| |
| /* |
| * Make sure that the type of the keymgmt to export to matches the type |
| * of the "origin" |
| */ |
| if (!ossl_assert(match_type(pk->keymgmt, keymgmt))) |
| return NULL; |
| |
| /* |
| * We look at the already cached provider keys, and import from the |
| * first that supports it (i.e. use its export function), and export |
| * the imported data to the new provider. |
| */ |
| |
| /* Setup for the export callback */ |
| import_data.keydata = NULL; /* evp_keymgmt_util_try_import will create it */ |
| import_data.keymgmt = keymgmt; |
| import_data.selection = OSSL_KEYMGMT_SELECT_ALL; |
| |
| /* |
| * The export function calls the callback (evp_keymgmt_util_try_import), |
| * which does the import for us. If successful, we're done. |
| */ |
| if (!evp_keymgmt_util_export(pk, OSSL_KEYMGMT_SELECT_ALL, |
| &evp_keymgmt_util_try_import, &import_data)) |
| /* If there was an error, bail out */ |
| return NULL; |
| |
| if (!CRYPTO_THREAD_write_lock(pk->lock)) { |
| evp_keymgmt_freedata(keymgmt, import_data.keydata); |
| return NULL; |
| } |
| /* Check to make sure some other thread didn't get there first */ |
| op = evp_keymgmt_util_find_operation_cache(pk, keymgmt); |
| if (op != NULL && op->keydata != NULL) { |
| void *ret = op->keydata; |
| |
| CRYPTO_THREAD_unlock(pk->lock); |
| |
| /* |
| * Another thread seemms to have already exported this so we abandon |
| * all the work we just did. |
| */ |
| evp_keymgmt_freedata(keymgmt, import_data.keydata); |
| |
| return ret; |
| } |
| |
| /* |
| * If the dirty counter changed since last time, then clear the |
| * operation cache. In that case, we know that |i| is zero. |
| */ |
| if (pk->dirty_cnt != pk->dirty_cnt_copy) |
| evp_keymgmt_util_clear_operation_cache(pk, 0); |
| |
| /* Add the new export to the operation cache */ |
| if (!evp_keymgmt_util_cache_keydata(pk, keymgmt, import_data.keydata)) { |
| CRYPTO_THREAD_unlock(pk->lock); |
| evp_keymgmt_freedata(keymgmt, import_data.keydata); |
| return NULL; |
| } |
| |
| /* Synchronize the dirty count */ |
| pk->dirty_cnt_copy = pk->dirty_cnt; |
| |
| CRYPTO_THREAD_unlock(pk->lock); |
| |
| return import_data.keydata; |
| } |
| |
| static void op_cache_free(OP_CACHE_ELEM *e) |
| { |
| evp_keymgmt_freedata(e->keymgmt, e->keydata); |
| EVP_KEYMGMT_free(e->keymgmt); |
| OPENSSL_free(e); |
| } |
| |
| int evp_keymgmt_util_clear_operation_cache(EVP_PKEY *pk, int locking) |
| { |
| if (pk != NULL) { |
| if (locking && pk->lock != NULL && !CRYPTO_THREAD_write_lock(pk->lock)) |
| return 0; |
| sk_OP_CACHE_ELEM_pop_free(pk->operation_cache, op_cache_free); |
| pk->operation_cache = NULL; |
| if (locking && pk->lock != NULL) |
| CRYPTO_THREAD_unlock(pk->lock); |
| } |
| |
| return 1; |
| } |
| |
| OP_CACHE_ELEM *evp_keymgmt_util_find_operation_cache(EVP_PKEY *pk, |
| EVP_KEYMGMT *keymgmt) |
| { |
| int i, end = sk_OP_CACHE_ELEM_num(pk->operation_cache); |
| OP_CACHE_ELEM *p; |
| |
| /* |
| * A comparison and sk_P_CACHE_ELEM_find() are avoided to not cause |
| * problems when we've only a read lock. |
| */ |
| for (i = 0; i < end; i++) { |
| p = sk_OP_CACHE_ELEM_value(pk->operation_cache, i); |
| if (keymgmt == p->keymgmt) |
| return p; |
| } |
| return NULL; |
| } |
| |
| int evp_keymgmt_util_cache_keydata(EVP_PKEY *pk, |
| EVP_KEYMGMT *keymgmt, void *keydata) |
| { |
| OP_CACHE_ELEM *p = NULL; |
| |
| if (keydata != NULL) { |
| if (pk->operation_cache == NULL) { |
| pk->operation_cache = sk_OP_CACHE_ELEM_new_null(); |
| if (pk->operation_cache == NULL) |
| return 0; |
| } |
| |
| p = OPENSSL_malloc(sizeof(*p)); |
| if (p == NULL) |
| return 0; |
| p->keydata = keydata; |
| p->keymgmt = keymgmt; |
| |
| if (!EVP_KEYMGMT_up_ref(keymgmt)) { |
| OPENSSL_free(p); |
| return 0; |
| } |
| |
| if (!sk_OP_CACHE_ELEM_push(pk->operation_cache, p)) { |
| EVP_KEYMGMT_free(keymgmt); |
| OPENSSL_free(p); |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| void evp_keymgmt_util_cache_keyinfo(EVP_PKEY *pk) |
| { |
| /* |
| * Cache information about the provider "origin" key. |
| * |
| * This services functions like EVP_PKEY_get_size, EVP_PKEY_get_bits, etc |
| */ |
| if (pk->keydata != NULL) { |
| int bits = 0; |
| int security_bits = 0; |
| int size = 0; |
| OSSL_PARAM params[4]; |
| |
| params[0] = OSSL_PARAM_construct_int(OSSL_PKEY_PARAM_BITS, &bits); |
| params[1] = OSSL_PARAM_construct_int(OSSL_PKEY_PARAM_SECURITY_BITS, |
| &security_bits); |
| params[2] = OSSL_PARAM_construct_int(OSSL_PKEY_PARAM_MAX_SIZE, &size); |
| params[3] = OSSL_PARAM_construct_end(); |
| if (evp_keymgmt_get_params(pk->keymgmt, pk->keydata, params)) { |
| pk->cache.size = size; |
| pk->cache.bits = bits; |
| pk->cache.security_bits = security_bits; |
| } |
| } |
| } |
| |
| void *evp_keymgmt_util_fromdata(EVP_PKEY *target, EVP_KEYMGMT *keymgmt, |
| int selection, const OSSL_PARAM params[]) |
| { |
| void *keydata = NULL; |
| |
| if ((keydata = evp_keymgmt_newdata(keymgmt)) == NULL |
| || !evp_keymgmt_import(keymgmt, keydata, selection, params) |
| || !evp_keymgmt_util_assign_pkey(target, keymgmt, keydata)) { |
| evp_keymgmt_freedata(keymgmt, keydata); |
| keydata = NULL; |
| } |
| return keydata; |
| } |
| |
| int evp_keymgmt_util_has(EVP_PKEY *pk, int selection) |
| { |
| /* Check if key is even assigned */ |
| if (pk->keymgmt == NULL) |
| return 0; |
| |
| return evp_keymgmt_has(pk->keymgmt, pk->keydata, selection); |
| } |
| |
| /* |
| * evp_keymgmt_util_match() doesn't just look at the provider side "origin", |
| * but also in the operation cache to see if there's any common keymgmt that |
| * supplies OP_keymgmt_match. |
| * |
| * evp_keymgmt_util_match() adheres to the return values that EVP_PKEY_eq() |
| * and EVP_PKEY_parameters_eq() return, i.e.: |
| * |
| * 1 same key |
| * 0 not same key |
| * -1 not same key type |
| * -2 unsupported operation |
| */ |
| int evp_keymgmt_util_match(EVP_PKEY *pk1, EVP_PKEY *pk2, int selection) |
| { |
| EVP_KEYMGMT *keymgmt1 = NULL, *keymgmt2 = NULL; |
| void *keydata1 = NULL, *keydata2 = NULL; |
| |
| if (pk1 == NULL || pk2 == NULL) { |
| if (pk1 == NULL && pk2 == NULL) |
| return 1; |
| return 0; |
| } |
| |
| keymgmt1 = pk1->keymgmt; |
| keydata1 = pk1->keydata; |
| keymgmt2 = pk2->keymgmt; |
| keydata2 = pk2->keydata; |
| |
| if (keymgmt1 != keymgmt2) { |
| /* |
| * The condition for a successful cross export is that the |
| * keydata to be exported is NULL (typed, but otherwise empty |
| * EVP_PKEY), or that it was possible to export it with |
| * evp_keymgmt_util_export_to_provider(). |
| * |
| * We use |ok| to determine if it's ok to cross export one way, |
| * but also to determine if we should attempt a cross export |
| * the other way. There's no point doing it both ways. |
| */ |
| int ok = 0; |
| |
| /* Complex case, where the keymgmt differ */ |
| if (keymgmt1 != NULL |
| && keymgmt2 != NULL |
| && !match_type(keymgmt1, keymgmt2)) { |
| ERR_raise(ERR_LIB_EVP, EVP_R_DIFFERENT_KEY_TYPES); |
| return -1; /* Not the same type */ |
| } |
| |
| /* |
| * The key types are determined to match, so we try cross export, |
| * but only to keymgmt's that supply a matching function. |
| */ |
| if (keymgmt2 != NULL |
| && keymgmt2->match != NULL) { |
| void *tmp_keydata = NULL; |
| |
| ok = 1; |
| if (keydata1 != NULL) { |
| tmp_keydata = |
| evp_keymgmt_util_export_to_provider(pk1, keymgmt2); |
| ok = (tmp_keydata != NULL); |
| } |
| if (ok) { |
| keymgmt1 = keymgmt2; |
| keydata1 = tmp_keydata; |
| } |
| } |
| /* |
| * If we've successfully cross exported one way, there's no point |
| * doing it the other way, hence the |!ok| check. |
| */ |
| if (!ok |
| && keymgmt1 != NULL |
| && keymgmt1->match != NULL) { |
| void *tmp_keydata = NULL; |
| |
| ok = 1; |
| if (keydata2 != NULL) { |
| tmp_keydata = |
| evp_keymgmt_util_export_to_provider(pk2, keymgmt1); |
| ok = (tmp_keydata != NULL); |
| } |
| if (ok) { |
| keymgmt2 = keymgmt1; |
| keydata2 = tmp_keydata; |
| } |
| } |
| } |
| |
| /* If we still don't have matching keymgmt implementations, we give up */ |
| if (keymgmt1 != keymgmt2) |
| return -2; |
| |
| /* If both keydata are NULL, then they're the same key */ |
| if (keydata1 == NULL && keydata2 == NULL) |
| return 1; |
| /* If only one of the keydata is NULL, then they're different keys */ |
| if (keydata1 == NULL || keydata2 == NULL) |
| return 0; |
| /* If both keydata are non-NULL, we let the backend decide */ |
| return evp_keymgmt_match(keymgmt1, keydata1, keydata2, selection); |
| } |
| |
| int evp_keymgmt_util_copy(EVP_PKEY *to, EVP_PKEY *from, int selection) |
| { |
| /* Save copies of pointers we want to play with without affecting |to| */ |
| EVP_KEYMGMT *to_keymgmt = to->keymgmt; |
| void *to_keydata = to->keydata, *alloc_keydata = NULL; |
| |
| /* An unassigned key can't be copied */ |
| if (from == NULL || from->keydata == NULL) |
| return 0; |
| |
| /* |
| * If |to| is unassigned, ensure it gets the same KEYMGMT as |from|, |
| * Note that the final setting of KEYMGMT is done further down, with |
| * EVP_PKEY_set_type_by_keymgmt(); we don't want to do that prematurely. |
| */ |
| if (to_keymgmt == NULL) |
| to_keymgmt = from->keymgmt; |
| |
| if (to_keymgmt == from->keymgmt && to_keymgmt->dup != NULL |
| && to_keydata == NULL) { |
| to_keydata = alloc_keydata = evp_keymgmt_dup(to_keymgmt, |
| from->keydata, |
| selection); |
| if (to_keydata == NULL) |
| return 0; |
| } else if (match_type(to_keymgmt, from->keymgmt)) { |
| struct evp_keymgmt_util_try_import_data_st import_data; |
| |
| import_data.keymgmt = to_keymgmt; |
| import_data.keydata = to_keydata; |
| import_data.selection = selection; |
| |
| if (!evp_keymgmt_util_export(from, selection, |
| &evp_keymgmt_util_try_import, |
| &import_data)) |
| return 0; |
| |
| /* |
| * In case to_keydata was previously unallocated, |
| * evp_keymgmt_util_try_import() may have created it for us. |
| */ |
| if (to_keydata == NULL) |
| to_keydata = alloc_keydata = import_data.keydata; |
| } else { |
| ERR_raise(ERR_LIB_EVP, EVP_R_DIFFERENT_KEY_TYPES); |
| return 0; |
| } |
| |
| /* |
| * We only need to set the |to| type when its |keymgmt| isn't set. |
| * We can then just set its |keydata| to what we have, which might |
| * be exactly what it had when entering this function. |
| * This is a bit different from using evp_keymgmt_util_assign_pkey(), |
| * which isn't as careful with |to|'s original |keymgmt|, since it's |
| * meant to forcibly reassign an EVP_PKEY no matter what, which is |
| * why we don't use that one here. |
| */ |
| if (to->keymgmt == NULL |
| && !EVP_PKEY_set_type_by_keymgmt(to, to_keymgmt)) { |
| evp_keymgmt_freedata(to_keymgmt, alloc_keydata); |
| return 0; |
| } |
| to->keydata = to_keydata; |
| evp_keymgmt_util_cache_keyinfo(to); |
| |
| return 1; |
| } |
| |
| void *evp_keymgmt_util_gen(EVP_PKEY *target, EVP_KEYMGMT *keymgmt, |
| void *genctx, OSSL_CALLBACK *cb, void *cbarg) |
| { |
| void *keydata = NULL; |
| |
| if ((keydata = evp_keymgmt_gen(keymgmt, genctx, cb, cbarg)) == NULL |
| || !evp_keymgmt_util_assign_pkey(target, keymgmt, keydata)) { |
| evp_keymgmt_freedata(keymgmt, keydata); |
| keydata = NULL; |
| } |
| |
| return keydata; |
| } |
| |
| /* |
| * Returns the same numbers as EVP_PKEY_get_default_digest_name() |
| * When the string from the EVP_KEYMGMT implementation is "", we use |
| * SN_undef, since that corresponds to what EVP_PKEY_get_default_nid() |
| * returns for no digest. |
| */ |
| int evp_keymgmt_util_get_deflt_digest_name(EVP_KEYMGMT *keymgmt, |
| void *keydata, |
| char *mdname, size_t mdname_sz) |
| { |
| OSSL_PARAM params[3]; |
| char mddefault[100] = ""; |
| char mdmandatory[100] = ""; |
| char *result = NULL; |
| int rv = -2; |
| |
| params[0] = |
| OSSL_PARAM_construct_utf8_string(OSSL_PKEY_PARAM_DEFAULT_DIGEST, |
| mddefault, sizeof(mddefault)); |
| params[1] = |
| OSSL_PARAM_construct_utf8_string(OSSL_PKEY_PARAM_MANDATORY_DIGEST, |
| mdmandatory, |
| sizeof(mdmandatory)); |
| params[2] = OSSL_PARAM_construct_end(); |
| |
| if (!evp_keymgmt_get_params(keymgmt, keydata, params)) |
| return 0; |
| |
| if (OSSL_PARAM_modified(params + 1)) { |
| if (params[1].return_size <= 1) /* Only a NUL byte */ |
| result = SN_undef; |
| else |
| result = mdmandatory; |
| rv = 2; |
| } else if (OSSL_PARAM_modified(params)) { |
| if (params[0].return_size <= 1) /* Only a NUL byte */ |
| result = SN_undef; |
| else |
| result = mddefault; |
| rv = 1; |
| } |
| if (rv > 0) |
| OPENSSL_strlcpy(mdname, result, mdname_sz); |
| return rv; |
| } |
| |
| /* |
| * If |keymgmt| has the method function |query_operation_name|, use it to get |
| * the name of a supported operation identity. Otherwise, return the keytype, |
| * assuming that it works as a default operation name. |
| */ |
| const char *evp_keymgmt_util_query_operation_name(EVP_KEYMGMT *keymgmt, |
| int op_id) |
| { |
| const char *name = NULL; |
| |
| if (keymgmt != NULL) { |
| if (keymgmt->query_operation_name != NULL) |
| name = keymgmt->query_operation_name(op_id); |
| if (name == NULL) |
| name = EVP_KEYMGMT_get0_name(keymgmt); |
| } |
| return name; |
| } |