crypto/init.c - third_party/openssl - Git at Google

 /*
  * Copyright 2016-2022 The OpenSSL Project Authors. All Rights Reserved.
  *
  * Licensed under the Apache License 2.0 (the "License").  You may not use
  * this file except in compliance with the License.  You can obtain a copy
  * in the file LICENSE in the source distribution or at
  * https://www.openssl.org/source/license.html
  */

 /* We need to use some engine deprecated APIs */
 #define OPENSSL_SUPPRESS_DEPRECATED

 #include "internal/e_os.h"
 #include "crypto/cryptlib.h"
 #include <openssl/err.h>
 #include "crypto/rand.h"
 #include "internal/bio.h"
 #include <openssl/evp.h>
 #include "crypto/evp.h"
 #include "internal/conf.h"
 #include "crypto/async.h"
 #include "crypto/engine.h"
 #include "internal/comp.h"
 #include "internal/err.h"
 #include "crypto/err.h"
 #include "crypto/objects.h"
 #include <stdlib.h>
 #include <assert.h>
 #include "internal/thread_once.h"
 #include "crypto/dso_conf.h"
 #include "internal/dso.h"
 #include "crypto/store.h"
 #include <openssl/cmp_util.h> /* for OSSL_CMP_log_close() */
 #include <openssl/trace.h>
 #include "crypto/ctype.h"

 static int stopped = 0;
 static uint64_t optsdone = 0;

 typedef struct ossl_init_stop_st OPENSSL_INIT_STOP;
 struct ossl_init_stop_st {
     void (*handler)(void);
     OPENSSL_INIT_STOP *next;
 };

 static OPENSSL_INIT_STOP *stop_handlers = NULL;
 static CRYPTO_RWLOCK *init_lock = NULL;
 static CRYPTO_THREAD_LOCAL in_init_config_local;

 static CRYPTO_ONCE base = CRYPTO_ONCE_STATIC_INIT;
 static int base_inited = 0;
 DEFINE_RUN_ONCE_STATIC(ossl_init_base)
 {
     /* no need to init trace */

     OSSL_TRACE(INIT, "ossl_init_base: setting up stop handlers\n");
 #ifndef OPENSSL_NO_CRYPTO_MDEBUG
     ossl_malloc_setup_failures();
 #endif

     if ((init_lock = CRYPTO_THREAD_lock_new()) == NULL)
         goto err;
     OPENSSL_cpuid_setup();

     if (!ossl_init_thread())
         goto err;

     if (!CRYPTO_THREAD_init_local(&in_init_config_local, NULL))
         goto err;

     base_inited = 1;
     return 1;

 err:
     OSSL_TRACE(INIT, "ossl_init_base failed!\n");
     CRYPTO_THREAD_lock_free(init_lock);
     init_lock = NULL;

     return 0;
 }

 static CRYPTO_ONCE register_atexit = CRYPTO_ONCE_STATIC_INIT;
 #if !defined(OPENSSL_SYS_UEFI) && defined(_WIN32)
 static int win32atexit(void)
 {
     OPENSSL_cleanup();
     return 0;
 }
 #endif

 DEFINE_RUN_ONCE_STATIC(ossl_init_register_atexit)
 {
 #ifdef OPENSSL_INIT_DEBUG
     fprintf(stderr, "OPENSSL_INIT: ossl_init_register_atexit()\n");
 #endif
 #ifndef OPENSSL_SYS_UEFI
 # if defined(_WIN32) && !defined(__BORLANDC__)
     /* We use _onexit() in preference because it gets called on DLL unload */
     if (_onexit(win32atexit) == NULL)
         return 0;
 # else
     if (atexit(OPENSSL_cleanup) != 0)
         return 0;
 # endif
 #endif

     return 1;
 }

 DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_register_atexit,
                            ossl_init_register_atexit)
 {
 #ifdef OPENSSL_INIT_DEBUG
     fprintf(stderr, "OPENSSL_INIT: ossl_init_no_register_atexit ok!\n");
 #endif
     /* Do nothing in this case */
     return 1;
 }

 static CRYPTO_ONCE load_crypto_nodelete = CRYPTO_ONCE_STATIC_INIT;
 DEFINE_RUN_ONCE_STATIC(ossl_init_load_crypto_nodelete)
 {
     OSSL_TRACE(INIT, "ossl_init_load_crypto_nodelete()\n");

 #if !defined(OPENSSL_USE_NODELETE) \
     && !defined(OPENSSL_NO_PINSHARED)
 # if defined(DSO_WIN32) && !defined(_WIN32_WCE)
     {
         HMODULE handle = NULL;
         BOOL ret;

         /* We don't use the DSO route for WIN32 because there is a better way */
         ret = GetModuleHandleEx(GET_MODULE_HANDLE_EX_FLAG_FROM_ADDRESS
                                 | GET_MODULE_HANDLE_EX_FLAG_PIN,
                                 (void *)&base_inited, &handle);

         OSSL_TRACE1(INIT,
                     "ossl_init_load_crypto_nodelete: "
                     "obtained DSO reference? %s\n",
                     (ret == TRUE ? "No!" : "Yes."));
         return (ret == TRUE) ? 1 : 0;
     }
 # elif !defined(DSO_NONE)
     /*
      * Deliberately leak a reference to ourselves. This will force the library
      * to remain loaded until the atexit() handler is run at process exit.
      */
     {
         DSO *dso;
         void *err;

         if (!err_shelve_state(&err))
             return 0;

         dso = DSO_dsobyaddr(&base_inited, DSO_FLAG_NO_UNLOAD_ON_FREE);
         /*
          * In case of No!, it is uncertain our exit()-handlers can still be
          * called. After dlclose() the whole library might have been unloaded
          * already.
          */
         OSSL_TRACE1(INIT, "obtained DSO reference? %s\n",
                     (dso == NULL ? "No!" : "Yes."));
         DSO_free(dso);
         err_unshelve_state(err);
     }
 # endif
 #endif

     return 1;
 }

 static CRYPTO_ONCE load_crypto_strings = CRYPTO_ONCE_STATIC_INIT;
 static int load_crypto_strings_inited = 0;
 DEFINE_RUN_ONCE_STATIC(ossl_init_load_crypto_strings)
 {
     int ret = 1;
     /*
      * OPENSSL_NO_AUTOERRINIT is provided here to prevent at compile time
      * pulling in all the error strings during static linking
      */
 #if !defined(OPENSSL_NO_ERR) && !defined(OPENSSL_NO_AUTOERRINIT)
     OSSL_TRACE(INIT, "ossl_err_load_crypto_strings()\n");
     ret = ossl_err_load_crypto_strings();
     load_crypto_strings_inited = 1;
 #endif
     return ret;
 }

 DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_load_crypto_strings,
                            ossl_init_load_crypto_strings)
 {
     /* Do nothing in this case */
     return 1;
 }

 static CRYPTO_ONCE add_all_ciphers = CRYPTO_ONCE_STATIC_INIT;
 DEFINE_RUN_ONCE_STATIC(ossl_init_add_all_ciphers)
 {
     /*
      * OPENSSL_NO_AUTOALGINIT is provided here to prevent at compile time
      * pulling in all the ciphers during static linking
      */
 #ifndef OPENSSL_NO_AUTOALGINIT
     OSSL_TRACE(INIT, "openssl_add_all_ciphers_int()\n");
     openssl_add_all_ciphers_int();
 #endif
     return 1;
 }

 DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_add_all_ciphers,
                            ossl_init_add_all_ciphers)
 {
     /* Do nothing */
     return 1;
 }

 static CRYPTO_ONCE add_all_digests = CRYPTO_ONCE_STATIC_INIT;
 DEFINE_RUN_ONCE_STATIC(ossl_init_add_all_digests)
 {
     /*
      * OPENSSL_NO_AUTOALGINIT is provided here to prevent at compile time
      * pulling in all the ciphers during static linking
      */
 #ifndef OPENSSL_NO_AUTOALGINIT
     OSSL_TRACE(INIT, "openssl_add_all_digests()\n");
     openssl_add_all_digests_int();
 #endif
     return 1;
 }

 DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_add_all_digests,
                            ossl_init_add_all_digests)
 {
     /* Do nothing */
     return 1;
 }

 static CRYPTO_ONCE config = CRYPTO_ONCE_STATIC_INIT;
 static int config_inited = 0;
 static const OPENSSL_INIT_SETTINGS *conf_settings = NULL;
 DEFINE_RUN_ONCE_STATIC(ossl_init_config)
 {
     int ret = ossl_config_int(NULL);

     config_inited = 1;
     return ret;
 }
 DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_config_settings, ossl_init_config)
 {
     int ret = ossl_config_int(conf_settings);

     config_inited = 1;
     return ret;
 }
 DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_config, ossl_init_config)
 {
     OSSL_TRACE(INIT, "ossl_no_config_int()\n");
     ossl_no_config_int();
     config_inited = 1;
     return 1;
 }

 static CRYPTO_ONCE async = CRYPTO_ONCE_STATIC_INIT;
 static int async_inited = 0;
 DEFINE_RUN_ONCE_STATIC(ossl_init_async)
 {
     OSSL_TRACE(INIT, "async_init()\n");
     if (!async_init())
         return 0;
     async_inited = 1;
     return 1;
 }

 static CRYPTO_ONCE casecmp = CRYPTO_ONCE_STATIC_INIT;
 static int casecmp_inited = 0;
 DEFINE_RUN_ONCE_STATIC(ossl_init_casecmp)
 {
     int ret = ossl_init_casecmp_int();

     casecmp_inited = 1;
     return ret;
 }
 #ifndef OPENSSL_NO_ENGINE
 static CRYPTO_ONCE engine_openssl = CRYPTO_ONCE_STATIC_INIT;
 DEFINE_RUN_ONCE_STATIC(ossl_init_engine_openssl)
 {
     OSSL_TRACE(INIT, "engine_load_openssl_int()\n");
     engine_load_openssl_int();
     return 1;
 }
 # ifndef OPENSSL_NO_RDRAND
 static CRYPTO_ONCE engine_rdrand = CRYPTO_ONCE_STATIC_INIT;
 DEFINE_RUN_ONCE_STATIC(ossl_init_engine_rdrand)
 {
     OSSL_TRACE(INIT, "engine_load_rdrand_int()\n");
     engine_load_rdrand_int();
     return 1;
 }
 # endif
 static CRYPTO_ONCE engine_dynamic = CRYPTO_ONCE_STATIC_INIT;
 DEFINE_RUN_ONCE_STATIC(ossl_init_engine_dynamic)
 {
     OSSL_TRACE(INIT, "engine_load_dynamic_int()\n");
     engine_load_dynamic_int();
     return 1;
 }
 # ifndef OPENSSL_NO_STATIC_ENGINE
 #  ifndef OPENSSL_NO_DEVCRYPTOENG
 static CRYPTO_ONCE engine_devcrypto = CRYPTO_ONCE_STATIC_INIT;
 DEFINE_RUN_ONCE_STATIC(ossl_init_engine_devcrypto)
 {
     OSSL_TRACE(INIT, "engine_load_devcrypto_int()\n");
     engine_load_devcrypto_int();
     return 1;
 }
 #  endif
 #  if !defined(OPENSSL_NO_PADLOCKENG)
 static CRYPTO_ONCE engine_padlock = CRYPTO_ONCE_STATIC_INIT;
 DEFINE_RUN_ONCE_STATIC(ossl_init_engine_padlock)
 {
     OSSL_TRACE(INIT, "engine_load_padlock_int()\n");
     engine_load_padlock_int();
     return 1;
 }
 #  endif
 #  if defined(OPENSSL_SYS_WIN32) && !defined(OPENSSL_NO_CAPIENG)
 static CRYPTO_ONCE engine_capi = CRYPTO_ONCE_STATIC_INIT;
 DEFINE_RUN_ONCE_STATIC(ossl_init_engine_capi)
 {
     OSSL_TRACE(INIT, "engine_load_capi_int()\n");
     engine_load_capi_int();
     return 1;
 }
 #  endif
 #  if !defined(OPENSSL_NO_AFALGENG)
 static CRYPTO_ONCE engine_afalg = CRYPTO_ONCE_STATIC_INIT;
 DEFINE_RUN_ONCE_STATIC(ossl_init_engine_afalg)
 {
     OSSL_TRACE(INIT, "engine_load_afalg_int()\n");
     engine_load_afalg_int();
     return 1;
 }
 #  endif
 # endif
 #endif

 void OPENSSL_cleanup(void)
 {
     OPENSSL_INIT_STOP *currhandler, *lasthandler;

     /*
      * At some point we should consider looking at this function with a view to
      * moving most/all of this into onfree handlers in OSSL_LIB_CTX.
      */

     /* If we've not been inited then no need to deinit */
     if (!base_inited)
         return;

     /* Might be explicitly called and also by atexit */
     if (stopped)
         return;
     stopped = 1;

     /*
      * Thread stop may not get automatically called by the thread library for
      * the very last thread in some situations, so call it directly.
      */
     OPENSSL_thread_stop();

     currhandler = stop_handlers;
     while (currhandler != NULL) {
         currhandler->handler();
         lasthandler = currhandler;
         currhandler = currhandler->next;
         OPENSSL_free(lasthandler);
     }
     stop_handlers = NULL;

     CRYPTO_THREAD_lock_free(init_lock);
     init_lock = NULL;

     CRYPTO_THREAD_cleanup_local(&in_init_config_local);

     /*
      * We assume we are single-threaded for this function, i.e. no race
      * conditions for the various "*_inited" vars below.
      */

 #ifndef OPENSSL_NO_COMP
     OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_comp_zlib_cleanup()\n");
     ossl_comp_zlib_cleanup();
 #endif

     if (async_inited) {
         OSSL_TRACE(INIT, "OPENSSL_cleanup: async_deinit()\n");
         async_deinit();
     }

     if (load_crypto_strings_inited) {
         OSSL_TRACE(INIT, "OPENSSL_cleanup: err_free_strings_int()\n");
         err_free_strings_int();
     }

     /*
      * Note that cleanup order is important:
      * - ossl_rand_cleanup_int could call an ENGINE's RAND cleanup function so
      * must be called before engine_cleanup_int()
      * - ENGINEs use CRYPTO_EX_DATA and therefore, must be cleaned up
      * before the ex data handlers are wiped during default ossl_lib_ctx deinit.
      * - ossl_config_modules_free() can end up in ENGINE code so must be called
      * before engine_cleanup_int()
      * - ENGINEs and additional EVP algorithms might use added OIDs names so
      * ossl_obj_cleanup_int() must be called last
      */
     OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_rand_cleanup_int()\n");
     ossl_rand_cleanup_int();

     OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_config_modules_free()\n");
     ossl_config_modules_free();

 #ifndef OPENSSL_NO_ENGINE
     OSSL_TRACE(INIT, "OPENSSL_cleanup: engine_cleanup_int()\n");
     engine_cleanup_int();
 #endif

 #ifndef OPENSSL_NO_DEPRECATED_3_0
     OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_store_cleanup_int()\n");
     ossl_store_cleanup_int();
 #endif

     OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_lib_ctx_default_deinit()\n");
     ossl_lib_ctx_default_deinit();

     ossl_cleanup_thread();

     OSSL_TRACE(INIT, "OPENSSL_cleanup: bio_cleanup()\n");
     bio_cleanup();

     OSSL_TRACE(INIT, "OPENSSL_cleanup: evp_cleanup_int()\n");
     evp_cleanup_int();

     OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_obj_cleanup_int()\n");
     ossl_obj_cleanup_int();

     OSSL_TRACE(INIT, "OPENSSL_cleanup: err_int()\n");
     err_cleanup();

     OSSL_TRACE(INIT, "OPENSSL_cleanup: CRYPTO_secure_malloc_done()\n");
     CRYPTO_secure_malloc_done();

 #ifndef OPENSSL_NO_CMP
     OSSL_TRACE(INIT, "OPENSSL_cleanup: OSSL_CMP_log_close()\n");
     OSSL_CMP_log_close();
 #endif

     OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_trace_cleanup()\n");
     ossl_trace_cleanup();

     if (casecmp_inited) {
         OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_deinit_casecmp()\n");
         ossl_deinit_casecmp();
     }

     base_inited = 0;
 }

 /*
  * If this function is called with a non NULL settings value then it must be
  * called prior to any threads making calls to any OpenSSL functions,
  * i.e. passing a non-null settings value is assumed to be single-threaded.
  */
 int OPENSSL_init_crypto(uint64_t opts, const OPENSSL_INIT_SETTINGS *settings)
 {
     uint64_t tmp;
     int aloaddone = 0;
     if (!RUN_ONCE(&casecmp, ossl_init_casecmp))
         return 0;


    /* Applications depend on 0 being returned when cleanup was already done */
     if (stopped) {
         if (!(opts & OPENSSL_INIT_BASE_ONLY))
             ERR_raise(ERR_LIB_CRYPTO, ERR_R_INIT_FAIL);
         return 0;
     }

     /*
      * We ignore failures from this function. It is probably because we are
      * on a platform that doesn't support lockless atomic loads (we may not
      * have created init_lock yet so we can't use it). This is just an
      * optimisation to skip the full checks in this function if we don't need
      * to, so we carry on regardless in the event of failure.
      *
      * There could be a race here with other threads, so that optsdone has not
      * been updated yet, even though the options have in fact been initialised.
      * This doesn't matter - it just means we will run the full function
      * unnecessarily - but all the critical code is contained in RUN_ONCE
      * functions anyway so we are safe.
      */
     if (CRYPTO_atomic_load(&optsdone, &tmp, NULL)) {
         if ((tmp & opts) == opts)
             return 1;
         aloaddone = 1;
     }

     /*
      * At some point we should look at this function with a view to moving
      * most/all of this into OSSL_LIB_CTX.
      *
      * When the caller specifies OPENSSL_INIT_BASE_ONLY, that should be the
      * *only* option specified.  With that option we return immediately after
      * doing the requested limited initialization.  Note that
      * err_shelve_state() called by us via ossl_init_load_crypto_nodelete()
      * re-enters OPENSSL_init_crypto() with OPENSSL_INIT_BASE_ONLY, but with
      * base already initialized this is a harmless NOOP.
      *
      * If we remain the only caller of err_shelve_state() the recursion should
      * perhaps be removed, but if in doubt, it can be left in place.
      */
     if (!RUN_ONCE(&base, ossl_init_base))
         return 0;

     if (opts & OPENSSL_INIT_BASE_ONLY)
         return 1;

     /*
      * init_lock should definitely be set up now, so we can now repeat the
      * same check from above but be sure that it will work even on platforms
      * without lockless CRYPTO_atomic_load
      */
     if (!aloaddone) {
         if (!CRYPTO_atomic_load(&optsdone, &tmp, init_lock))
             return 0;
         if ((tmp & opts) == opts)
             return 1;
     }

     /*
      * Now we don't always set up exit handlers, the INIT_BASE_ONLY calls
      * should not have the side-effect of setting up exit handlers, and
      * therefore, this code block is below the INIT_BASE_ONLY-conditioned early
      * return above.
      */
     if ((opts & OPENSSL_INIT_NO_ATEXIT) != 0) {
         if (!RUN_ONCE_ALT(&register_atexit, ossl_init_no_register_atexit,
                           ossl_init_register_atexit))
             return 0;
     } else if (!RUN_ONCE(&register_atexit, ossl_init_register_atexit)) {
         return 0;
     }

     if (!RUN_ONCE(&load_crypto_nodelete, ossl_init_load_crypto_nodelete))
         return 0;

     if ((opts & OPENSSL_INIT_NO_LOAD_CRYPTO_STRINGS)
             && !RUN_ONCE_ALT(&load_crypto_strings,
                              ossl_init_no_load_crypto_strings,
                              ossl_init_load_crypto_strings))
         return 0;

     if ((opts & OPENSSL_INIT_LOAD_CRYPTO_STRINGS)
             && !RUN_ONCE(&load_crypto_strings, ossl_init_load_crypto_strings))
         return 0;

     if ((opts & OPENSSL_INIT_NO_ADD_ALL_CIPHERS)
             && !RUN_ONCE_ALT(&add_all_ciphers, ossl_init_no_add_all_ciphers,
                              ossl_init_add_all_ciphers))
         return 0;

     if ((opts & OPENSSL_INIT_ADD_ALL_CIPHERS)
             && !RUN_ONCE(&add_all_ciphers, ossl_init_add_all_ciphers))
         return 0;

     if ((opts & OPENSSL_INIT_NO_ADD_ALL_DIGESTS)
             && !RUN_ONCE_ALT(&add_all_digests, ossl_init_no_add_all_digests,
                              ossl_init_add_all_digests))
         return 0;

     if ((opts & OPENSSL_INIT_ADD_ALL_DIGESTS)
             && !RUN_ONCE(&add_all_digests, ossl_init_add_all_digests))
         return 0;

     if ((opts & OPENSSL_INIT_ATFORK)
             && !openssl_init_fork_handlers())
         return 0;

     if ((opts & OPENSSL_INIT_NO_LOAD_CONFIG)
             && !RUN_ONCE_ALT(&config, ossl_init_no_config, ossl_init_config))
         return 0;

     if (opts & OPENSSL_INIT_LOAD_CONFIG) {
         int loading = CRYPTO_THREAD_get_local(&in_init_config_local) != NULL;

         /* If called recursively from OBJ_ calls, just skip it. */
         if (!loading) {
             int ret;

             if (!CRYPTO_THREAD_set_local(&in_init_config_local, (void *)-1))
                 return 0;
             if (settings == NULL) {
                 ret = RUN_ONCE(&config, ossl_init_config);
             } else {
                 if (!CRYPTO_THREAD_write_lock(init_lock))
                     return 0;
                 conf_settings = settings;
                 ret = RUN_ONCE_ALT(&config, ossl_init_config_settings,
                                    ossl_init_config);
                 conf_settings = NULL;
                 CRYPTO_THREAD_unlock(init_lock);
             }

             if (ret <= 0)
                 return 0;
         }
     }

     if ((opts & OPENSSL_INIT_ASYNC)
             && !RUN_ONCE(&async, ossl_init_async))
         return 0;

 #ifndef OPENSSL_NO_ENGINE
     if ((opts & OPENSSL_INIT_ENGINE_OPENSSL)
             && !RUN_ONCE(&engine_openssl, ossl_init_engine_openssl))
         return 0;
 # ifndef OPENSSL_NO_RDRAND
     if ((opts & OPENSSL_INIT_ENGINE_RDRAND)
             && !RUN_ONCE(&engine_rdrand, ossl_init_engine_rdrand))
         return 0;
 # endif
     if ((opts & OPENSSL_INIT_ENGINE_DYNAMIC)
             && !RUN_ONCE(&engine_dynamic, ossl_init_engine_dynamic))
         return 0;
 # ifndef OPENSSL_NO_STATIC_ENGINE
 #  ifndef OPENSSL_NO_DEVCRYPTOENG
     if ((opts & OPENSSL_INIT_ENGINE_CRYPTODEV)
             && !RUN_ONCE(&engine_devcrypto, ossl_init_engine_devcrypto))
         return 0;
 #  endif
 #  if !defined(OPENSSL_NO_PADLOCKENG)
     if ((opts & OPENSSL_INIT_ENGINE_PADLOCK)
             && !RUN_ONCE(&engine_padlock, ossl_init_engine_padlock))
         return 0;
 #  endif
 #  if defined(OPENSSL_SYS_WIN32) && !defined(OPENSSL_NO_CAPIENG)
     if ((opts & OPENSSL_INIT_ENGINE_CAPI)
             && !RUN_ONCE(&engine_capi, ossl_init_engine_capi))
         return 0;
 #  endif
 #  if !defined(OPENSSL_NO_AFALGENG)
     if ((opts & OPENSSL_INIT_ENGINE_AFALG)
             && !RUN_ONCE(&engine_afalg, ossl_init_engine_afalg))
         return 0;
 #  endif
 # endif
     if (opts & (OPENSSL_INIT_ENGINE_ALL_BUILTIN
                 | OPENSSL_INIT_ENGINE_OPENSSL
                 | OPENSSL_INIT_ENGINE_AFALG)) {
         ENGINE_register_all_complete();
     }
 #endif

     if (!CRYPTO_atomic_or(&optsdone, opts, &tmp, init_lock))
         return 0;

     return 1;
 }

 int OPENSSL_atexit(void (*handler)(void))
 {
     OPENSSL_INIT_STOP *newhand;

 #if !defined(OPENSSL_USE_NODELETE)\
     && !defined(OPENSSL_NO_PINSHARED)
     {
         union {
             void *sym;
             void (*func)(void);
         } handlersym;

         handlersym.func = handler;
 # if defined(DSO_WIN32) && !defined(_WIN32_WCE)
         {
             HMODULE handle = NULL;
             BOOL ret;

             /*
              * We don't use the DSO route for WIN32 because there is a better
              * way
              */
             ret = GetModuleHandleEx(GET_MODULE_HANDLE_EX_FLAG_FROM_ADDRESS
                                     | GET_MODULE_HANDLE_EX_FLAG_PIN,
                                     handlersym.sym, &handle);

             if (!ret)
                 return 0;
         }
 # elif !defined(DSO_NONE)
         /*
          * Deliberately leak a reference to the handler. This will force the
          * library/code containing the handler to remain loaded until we run the
          * atexit handler. If -znodelete has been used then this is
          * unnecessary.
          */
         {
             DSO *dso = NULL;

             ERR_set_mark();
             dso = DSO_dsobyaddr(handlersym.sym, DSO_FLAG_NO_UNLOAD_ON_FREE);
             /* See same code above in ossl_init_base() for an explanation. */
             OSSL_TRACE1(INIT,
                        "atexit: obtained DSO reference? %s\n",
                        (dso == NULL ? "No!" : "Yes."));
             DSO_free(dso);
             ERR_pop_to_mark();
         }
 # endif
     }
 #endif

     if ((newhand = OPENSSL_malloc(sizeof(*newhand))) == NULL) {
         ERR_raise(ERR_LIB_CRYPTO, ERR_R_MALLOC_FAILURE);
         return 0;
     }

     newhand->handler = handler;
     newhand->next = stop_handlers;
     stop_handlers = newhand;

     return 1;
 }
	/*
	* Copyright 2016-2022 The OpenSSL Project Authors. All Rights Reserved.
	*
	* Licensed under the Apache License 2.0 (the "License"). You may not use
	* this file except in compliance with the License. You can obtain a copy
	* in the file LICENSE in the source distribution or at
	* https://www.openssl.org/source/license.html
	*/

	/* We need to use some engine deprecated APIs */
	#define OPENSSL_SUPPRESS_DEPRECATED

	#include "internal/e_os.h"
	#include "crypto/cryptlib.h"
	#include <openssl/err.h>
	#include "crypto/rand.h"
	#include "internal/bio.h"
	#include <openssl/evp.h>
	#include "crypto/evp.h"
	#include "internal/conf.h"
	#include "crypto/async.h"
	#include "crypto/engine.h"
	#include "internal/comp.h"
	#include "internal/err.h"
	#include "crypto/err.h"
	#include "crypto/objects.h"
	#include <stdlib.h>
	#include <assert.h>
	#include "internal/thread_once.h"
	#include "crypto/dso_conf.h"
	#include "internal/dso.h"
	#include "crypto/store.h"
	#include <openssl/cmp_util.h> /* for OSSL_CMP_log_close() */
	#include <openssl/trace.h>
	#include "crypto/ctype.h"

	static int stopped = 0;
	static uint64_t optsdone = 0;

	typedef struct ossl_init_stop_st OPENSSL_INIT_STOP;
	struct ossl_init_stop_st {
	void (*handler)(void);
	OPENSSL_INIT_STOP *next;
	};

	static OPENSSL_INIT_STOP *stop_handlers = NULL;
	static CRYPTO_RWLOCK *init_lock = NULL;
	static CRYPTO_THREAD_LOCAL in_init_config_local;

	static CRYPTO_ONCE base = CRYPTO_ONCE_STATIC_INIT;
	static int base_inited = 0;
	DEFINE_RUN_ONCE_STATIC(ossl_init_base)
	{
	/* no need to init trace */

	OSSL_TRACE(INIT, "ossl_init_base: setting up stop handlers\n");
	#ifndef OPENSSL_NO_CRYPTO_MDEBUG
	ossl_malloc_setup_failures();
	#endif

	if ((init_lock = CRYPTO_THREAD_lock_new()) == NULL)
	goto err;
	OPENSSL_cpuid_setup();

	if (!ossl_init_thread())
	goto err;

	if (!CRYPTO_THREAD_init_local(&in_init_config_local, NULL))
	goto err;

	base_inited = 1;
	return 1;

	err:
	OSSL_TRACE(INIT, "ossl_init_base failed!\n");
	CRYPTO_THREAD_lock_free(init_lock);
	init_lock = NULL;

	return 0;
	}

	static CRYPTO_ONCE register_atexit = CRYPTO_ONCE_STATIC_INIT;
	#if !defined(OPENSSL_SYS_UEFI) && defined(_WIN32)
	static int win32atexit(void)
	{
	OPENSSL_cleanup();
	return 0;
	}
	#endif

	DEFINE_RUN_ONCE_STATIC(ossl_init_register_atexit)
	{
	#ifdef OPENSSL_INIT_DEBUG
	fprintf(stderr, "OPENSSL_INIT: ossl_init_register_atexit()\n");
	#endif
	#ifndef OPENSSL_SYS_UEFI
	# if defined(_WIN32) && !defined(__BORLANDC__)
	/* We use _onexit() in preference because it gets called on DLL unload */
	if (_onexit(win32atexit) == NULL)
	return 0;
	# else
	if (atexit(OPENSSL_cleanup) != 0)
	return 0;
	# endif
	#endif

	return 1;
	}

	DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_register_atexit,
	ossl_init_register_atexit)
	{
	#ifdef OPENSSL_INIT_DEBUG
	fprintf(stderr, "OPENSSL_INIT: ossl_init_no_register_atexit ok!\n");
	#endif
	/* Do nothing in this case */
	return 1;
	}

	static CRYPTO_ONCE load_crypto_nodelete = CRYPTO_ONCE_STATIC_INIT;
	DEFINE_RUN_ONCE_STATIC(ossl_init_load_crypto_nodelete)
	{
	OSSL_TRACE(INIT, "ossl_init_load_crypto_nodelete()\n");

	#if !defined(OPENSSL_USE_NODELETE) \
	&& !defined(OPENSSL_NO_PINSHARED)
	# if defined(DSO_WIN32) && !defined(_WIN32_WCE)
	{
	HMODULE handle = NULL;
	BOOL ret;

	/* We don't use the DSO route for WIN32 because there is a better way */
	ret = GetModuleHandleEx(GET_MODULE_HANDLE_EX_FLAG_FROM_ADDRESS
	\| GET_MODULE_HANDLE_EX_FLAG_PIN,
	(void *)&base_inited, &handle);

	OSSL_TRACE1(INIT,
	"ossl_init_load_crypto_nodelete: "
	"obtained DSO reference? %s\n",
	(ret == TRUE ? "No!" : "Yes."));
	return (ret == TRUE) ? 1 : 0;
	}
	# elif !defined(DSO_NONE)
	/*
	* Deliberately leak a reference to ourselves. This will force the library
	* to remain loaded until the atexit() handler is run at process exit.
	*/
	{
	DSO *dso;
	void *err;

	if (!err_shelve_state(&err))
	return 0;

	dso = DSO_dsobyaddr(&base_inited, DSO_FLAG_NO_UNLOAD_ON_FREE);
	/*
	* In case of No!, it is uncertain our exit()-handlers can still be
	* called. After dlclose() the whole library might have been unloaded
	* already.
	*/
	OSSL_TRACE1(INIT, "obtained DSO reference? %s\n",
	(dso == NULL ? "No!" : "Yes."));
	DSO_free(dso);
	err_unshelve_state(err);
	}
	# endif
	#endif

	return 1;
	}

	static CRYPTO_ONCE load_crypto_strings = CRYPTO_ONCE_STATIC_INIT;
	static int load_crypto_strings_inited = 0;
	DEFINE_RUN_ONCE_STATIC(ossl_init_load_crypto_strings)
	{
	int ret = 1;
	/*
	* OPENSSL_NO_AUTOERRINIT is provided here to prevent at compile time
	* pulling in all the error strings during static linking
	*/
	#if !defined(OPENSSL_NO_ERR) && !defined(OPENSSL_NO_AUTOERRINIT)
	OSSL_TRACE(INIT, "ossl_err_load_crypto_strings()\n");
	ret = ossl_err_load_crypto_strings();
	load_crypto_strings_inited = 1;
	#endif
	return ret;
	}

	DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_load_crypto_strings,
	ossl_init_load_crypto_strings)
	{
	/* Do nothing in this case */
	return 1;
	}

	static CRYPTO_ONCE add_all_ciphers = CRYPTO_ONCE_STATIC_INIT;
	DEFINE_RUN_ONCE_STATIC(ossl_init_add_all_ciphers)
	{
	/*
	* OPENSSL_NO_AUTOALGINIT is provided here to prevent at compile time
	* pulling in all the ciphers during static linking
	*/
	#ifndef OPENSSL_NO_AUTOALGINIT
	OSSL_TRACE(INIT, "openssl_add_all_ciphers_int()\n");
	openssl_add_all_ciphers_int();
	#endif
	return 1;
	}

	DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_add_all_ciphers,
	ossl_init_add_all_ciphers)
	{
	/* Do nothing */
	return 1;
	}

	static CRYPTO_ONCE add_all_digests = CRYPTO_ONCE_STATIC_INIT;
	DEFINE_RUN_ONCE_STATIC(ossl_init_add_all_digests)
	{
	/*
	* OPENSSL_NO_AUTOALGINIT is provided here to prevent at compile time
	* pulling in all the ciphers during static linking
	*/
	#ifndef OPENSSL_NO_AUTOALGINIT
	OSSL_TRACE(INIT, "openssl_add_all_digests()\n");
	openssl_add_all_digests_int();
	#endif
	return 1;
	}

	DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_add_all_digests,
	ossl_init_add_all_digests)
	{
	/* Do nothing */
	return 1;
	}

	static CRYPTO_ONCE config = CRYPTO_ONCE_STATIC_INIT;
	static int config_inited = 0;
	static const OPENSSL_INIT_SETTINGS *conf_settings = NULL;
	DEFINE_RUN_ONCE_STATIC(ossl_init_config)
	{
	int ret = ossl_config_int(NULL);

	config_inited = 1;
	return ret;
	}
	DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_config_settings, ossl_init_config)
	{
	int ret = ossl_config_int(conf_settings);

	config_inited = 1;
	return ret;
	}
	DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_config, ossl_init_config)
	{
	OSSL_TRACE(INIT, "ossl_no_config_int()\n");
	ossl_no_config_int();
	config_inited = 1;
	return 1;
	}

	static CRYPTO_ONCE async = CRYPTO_ONCE_STATIC_INIT;
	static int async_inited = 0;
	DEFINE_RUN_ONCE_STATIC(ossl_init_async)
	{
	OSSL_TRACE(INIT, "async_init()\n");
	if (!async_init())
	return 0;
	async_inited = 1;
	return 1;
	}

	static CRYPTO_ONCE casecmp = CRYPTO_ONCE_STATIC_INIT;
	static int casecmp_inited = 0;
	DEFINE_RUN_ONCE_STATIC(ossl_init_casecmp)
	{
	int ret = ossl_init_casecmp_int();

	casecmp_inited = 1;
	return ret;
	}
	#ifndef OPENSSL_NO_ENGINE
	static CRYPTO_ONCE engine_openssl = CRYPTO_ONCE_STATIC_INIT;
	DEFINE_RUN_ONCE_STATIC(ossl_init_engine_openssl)
	{
	OSSL_TRACE(INIT, "engine_load_openssl_int()\n");
	engine_load_openssl_int();
	return 1;
	}
	# ifndef OPENSSL_NO_RDRAND
	static CRYPTO_ONCE engine_rdrand = CRYPTO_ONCE_STATIC_INIT;
	DEFINE_RUN_ONCE_STATIC(ossl_init_engine_rdrand)
	{
	OSSL_TRACE(INIT, "engine_load_rdrand_int()\n");
	engine_load_rdrand_int();
	return 1;
	}
	# endif
	static CRYPTO_ONCE engine_dynamic = CRYPTO_ONCE_STATIC_INIT;
	DEFINE_RUN_ONCE_STATIC(ossl_init_engine_dynamic)
	{
	OSSL_TRACE(INIT, "engine_load_dynamic_int()\n");
	engine_load_dynamic_int();
	return 1;
	}
	# ifndef OPENSSL_NO_STATIC_ENGINE
	# ifndef OPENSSL_NO_DEVCRYPTOENG
	static CRYPTO_ONCE engine_devcrypto = CRYPTO_ONCE_STATIC_INIT;
	DEFINE_RUN_ONCE_STATIC(ossl_init_engine_devcrypto)
	{
	OSSL_TRACE(INIT, "engine_load_devcrypto_int()\n");
	engine_load_devcrypto_int();
	return 1;
	}
	# endif
	# if !defined(OPENSSL_NO_PADLOCKENG)
	static CRYPTO_ONCE engine_padlock = CRYPTO_ONCE_STATIC_INIT;
	DEFINE_RUN_ONCE_STATIC(ossl_init_engine_padlock)
	{
	OSSL_TRACE(INIT, "engine_load_padlock_int()\n");
	engine_load_padlock_int();
	return 1;
	}
	# endif
	# if defined(OPENSSL_SYS_WIN32) && !defined(OPENSSL_NO_CAPIENG)
	static CRYPTO_ONCE engine_capi = CRYPTO_ONCE_STATIC_INIT;
	DEFINE_RUN_ONCE_STATIC(ossl_init_engine_capi)
	{
	OSSL_TRACE(INIT, "engine_load_capi_int()\n");
	engine_load_capi_int();
	return 1;
	}
	# endif
	# if !defined(OPENSSL_NO_AFALGENG)
	static CRYPTO_ONCE engine_afalg = CRYPTO_ONCE_STATIC_INIT;
	DEFINE_RUN_ONCE_STATIC(ossl_init_engine_afalg)
	{
	OSSL_TRACE(INIT, "engine_load_afalg_int()\n");
	engine_load_afalg_int();
	return 1;
	}
	# endif
	# endif
	#endif

	void OPENSSL_cleanup(void)
	{
	OPENSSL_INIT_STOP currhandler, lasthandler;

	/*
	* At some point we should consider looking at this function with a view to
	* moving most/all of this into onfree handlers in OSSL_LIB_CTX.
	*/

	/* If we've not been inited then no need to deinit */
	if (!base_inited)
	return;

	/* Might be explicitly called and also by atexit */
	if (stopped)
	return;
	stopped = 1;

	/*
	* Thread stop may not get automatically called by the thread library for
	* the very last thread in some situations, so call it directly.
	*/
	OPENSSL_thread_stop();

	currhandler = stop_handlers;
	while (currhandler != NULL) {
	currhandler->handler();
	lasthandler = currhandler;
	currhandler = currhandler->next;
	OPENSSL_free(lasthandler);
	}
	stop_handlers = NULL;

	CRYPTO_THREAD_lock_free(init_lock);
	init_lock = NULL;

	CRYPTO_THREAD_cleanup_local(&in_init_config_local);

	/*
	* We assume we are single-threaded for this function, i.e. no race
	* conditions for the various "*_inited" vars below.
	*/

	#ifndef OPENSSL_NO_COMP
	OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_comp_zlib_cleanup()\n");
	ossl_comp_zlib_cleanup();
	#endif

	if (async_inited) {
	OSSL_TRACE(INIT, "OPENSSL_cleanup: async_deinit()\n");
	async_deinit();
	}

	if (load_crypto_strings_inited) {
	OSSL_TRACE(INIT, "OPENSSL_cleanup: err_free_strings_int()\n");
	err_free_strings_int();
	}

	/*
	* Note that cleanup order is important:
	* - ossl_rand_cleanup_int could call an ENGINE's RAND cleanup function so
	* must be called before engine_cleanup_int()
	* - ENGINEs use CRYPTO_EX_DATA and therefore, must be cleaned up
	* before the ex data handlers are wiped during default ossl_lib_ctx deinit.
	* - ossl_config_modules_free() can end up in ENGINE code so must be called
	* before engine_cleanup_int()
	* - ENGINEs and additional EVP algorithms might use added OIDs names so
	* ossl_obj_cleanup_int() must be called last
	*/
	OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_rand_cleanup_int()\n");
	ossl_rand_cleanup_int();

	OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_config_modules_free()\n");
	ossl_config_modules_free();

	#ifndef OPENSSL_NO_ENGINE
	OSSL_TRACE(INIT, "OPENSSL_cleanup: engine_cleanup_int()\n");
	engine_cleanup_int();
	#endif

	#ifndef OPENSSL_NO_DEPRECATED_3_0
	OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_store_cleanup_int()\n");
	ossl_store_cleanup_int();
	#endif

	OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_lib_ctx_default_deinit()\n");
	ossl_lib_ctx_default_deinit();

	ossl_cleanup_thread();

	OSSL_TRACE(INIT, "OPENSSL_cleanup: bio_cleanup()\n");
	bio_cleanup();

	OSSL_TRACE(INIT, "OPENSSL_cleanup: evp_cleanup_int()\n");
	evp_cleanup_int();

	OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_obj_cleanup_int()\n");
	ossl_obj_cleanup_int();

	OSSL_TRACE(INIT, "OPENSSL_cleanup: err_int()\n");
	err_cleanup();

	OSSL_TRACE(INIT, "OPENSSL_cleanup: CRYPTO_secure_malloc_done()\n");
	CRYPTO_secure_malloc_done();

	#ifndef OPENSSL_NO_CMP
	OSSL_TRACE(INIT, "OPENSSL_cleanup: OSSL_CMP_log_close()\n");
	OSSL_CMP_log_close();
	#endif

	OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_trace_cleanup()\n");
	ossl_trace_cleanup();

	if (casecmp_inited) {
	OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_deinit_casecmp()\n");
	ossl_deinit_casecmp();
	}

	base_inited = 0;
	}

	/*
	* If this function is called with a non NULL settings value then it must be
	* called prior to any threads making calls to any OpenSSL functions,
	* i.e. passing a non-null settings value is assumed to be single-threaded.
	*/
	int OPENSSL_init_crypto(uint64_t opts, const OPENSSL_INIT_SETTINGS *settings)
	{
	uint64_t tmp;
	int aloaddone = 0;
	if (!RUN_ONCE(&casecmp, ossl_init_casecmp))
	return 0;


	/* Applications depend on 0 being returned when cleanup was already done */
	if (stopped) {
	if (!(opts & OPENSSL_INIT_BASE_ONLY))
	ERR_raise(ERR_LIB_CRYPTO, ERR_R_INIT_FAIL);
	return 0;
	}

	/*
	* We ignore failures from this function. It is probably because we are
	* on a platform that doesn't support lockless atomic loads (we may not
	* have created init_lock yet so we can't use it). This is just an
	* optimisation to skip the full checks in this function if we don't need
	* to, so we carry on regardless in the event of failure.
	*
	* There could be a race here with other threads, so that optsdone has not
	* been updated yet, even though the options have in fact been initialised.
	* This doesn't matter - it just means we will run the full function
	* unnecessarily - but all the critical code is contained in RUN_ONCE
	* functions anyway so we are safe.
	*/
	if (CRYPTO_atomic_load(&optsdone, &tmp, NULL)) {
	if ((tmp & opts) == opts)
	return 1;
	aloaddone = 1;
	}

	/*
	* At some point we should look at this function with a view to moving
	* most/all of this into OSSL_LIB_CTX.
	*
	* When the caller specifies OPENSSL_INIT_BASE_ONLY, that should be the
	* only option specified. With that option we return immediately after
	* doing the requested limited initialization. Note that
	* err_shelve_state() called by us via ossl_init_load_crypto_nodelete()
	* re-enters OPENSSL_init_crypto() with OPENSSL_INIT_BASE_ONLY, but with
	* base already initialized this is a harmless NOOP.
	*
	* If we remain the only caller of err_shelve_state() the recursion should
	* perhaps be removed, but if in doubt, it can be left in place.
	*/
	if (!RUN_ONCE(&base, ossl_init_base))
	return 0;

	if (opts & OPENSSL_INIT_BASE_ONLY)
	return 1;

	/*
	* init_lock should definitely be set up now, so we can now repeat the
	* same check from above but be sure that it will work even on platforms
	* without lockless CRYPTO_atomic_load
	*/
	if (!aloaddone) {
	if (!CRYPTO_atomic_load(&optsdone, &tmp, init_lock))
	return 0;
	if ((tmp & opts) == opts)
	return 1;
	}

	/*
	* Now we don't always set up exit handlers, the INIT_BASE_ONLY calls
	* should not have the side-effect of setting up exit handlers, and
	* therefore, this code block is below the INIT_BASE_ONLY-conditioned early
	* return above.
	*/
	if ((opts & OPENSSL_INIT_NO_ATEXIT) != 0) {
	if (!RUN_ONCE_ALT(&register_atexit, ossl_init_no_register_atexit,
	ossl_init_register_atexit))
	return 0;
	} else if (!RUN_ONCE(&register_atexit, ossl_init_register_atexit)) {
	return 0;
	}

	if (!RUN_ONCE(&load_crypto_nodelete, ossl_init_load_crypto_nodelete))
	return 0;

	if ((opts & OPENSSL_INIT_NO_LOAD_CRYPTO_STRINGS)
	&& !RUN_ONCE_ALT(&load_crypto_strings,
	ossl_init_no_load_crypto_strings,
	ossl_init_load_crypto_strings))
	return 0;

	if ((opts & OPENSSL_INIT_LOAD_CRYPTO_STRINGS)
	&& !RUN_ONCE(&load_crypto_strings, ossl_init_load_crypto_strings))
	return 0;

	if ((opts & OPENSSL_INIT_NO_ADD_ALL_CIPHERS)
	&& !RUN_ONCE_ALT(&add_all_ciphers, ossl_init_no_add_all_ciphers,
	ossl_init_add_all_ciphers))
	return 0;

	if ((opts & OPENSSL_INIT_ADD_ALL_CIPHERS)
	&& !RUN_ONCE(&add_all_ciphers, ossl_init_add_all_ciphers))
	return 0;

	if ((opts & OPENSSL_INIT_NO_ADD_ALL_DIGESTS)
	&& !RUN_ONCE_ALT(&add_all_digests, ossl_init_no_add_all_digests,
	ossl_init_add_all_digests))
	return 0;

	if ((opts & OPENSSL_INIT_ADD_ALL_DIGESTS)
	&& !RUN_ONCE(&add_all_digests, ossl_init_add_all_digests))
	return 0;

	if ((opts & OPENSSL_INIT_ATFORK)
	&& !openssl_init_fork_handlers())
	return 0;

	if ((opts & OPENSSL_INIT_NO_LOAD_CONFIG)
	&& !RUN_ONCE_ALT(&config, ossl_init_no_config, ossl_init_config))
	return 0;

	if (opts & OPENSSL_INIT_LOAD_CONFIG) {
	int loading = CRYPTO_THREAD_get_local(&in_init_config_local) != NULL;

	/* If called recursively from OBJ_ calls, just skip it. */
	if (!loading) {
	int ret;

	if (!CRYPTO_THREAD_set_local(&in_init_config_local, (void *)-1))
	return 0;
	if (settings == NULL) {
	ret = RUN_ONCE(&config, ossl_init_config);
	} else {
	if (!CRYPTO_THREAD_write_lock(init_lock))
	return 0;
	conf_settings = settings;
	ret = RUN_ONCE_ALT(&config, ossl_init_config_settings,
	ossl_init_config);
	conf_settings = NULL;
	CRYPTO_THREAD_unlock(init_lock);
	}

	if (ret <= 0)
	return 0;
	}
	}

	if ((opts & OPENSSL_INIT_ASYNC)
	&& !RUN_ONCE(&async, ossl_init_async))
	return 0;

	#ifndef OPENSSL_NO_ENGINE
	if ((opts & OPENSSL_INIT_ENGINE_OPENSSL)
	&& !RUN_ONCE(&engine_openssl, ossl_init_engine_openssl))
	return 0;
	# ifndef OPENSSL_NO_RDRAND
	if ((opts & OPENSSL_INIT_ENGINE_RDRAND)
	&& !RUN_ONCE(&engine_rdrand, ossl_init_engine_rdrand))
	return 0;
	# endif
	if ((opts & OPENSSL_INIT_ENGINE_DYNAMIC)
	&& !RUN_ONCE(&engine_dynamic, ossl_init_engine_dynamic))
	return 0;
	# ifndef OPENSSL_NO_STATIC_ENGINE
	# ifndef OPENSSL_NO_DEVCRYPTOENG
	if ((opts & OPENSSL_INIT_ENGINE_CRYPTODEV)
	&& !RUN_ONCE(&engine_devcrypto, ossl_init_engine_devcrypto))
	return 0;
	# endif
	# if !defined(OPENSSL_NO_PADLOCKENG)
	if ((opts & OPENSSL_INIT_ENGINE_PADLOCK)
	&& !RUN_ONCE(&engine_padlock, ossl_init_engine_padlock))
	return 0;
	# endif
	# if defined(OPENSSL_SYS_WIN32) && !defined(OPENSSL_NO_CAPIENG)
	if ((opts & OPENSSL_INIT_ENGINE_CAPI)
	&& !RUN_ONCE(&engine_capi, ossl_init_engine_capi))
	return 0;
	# endif
	# if !defined(OPENSSL_NO_AFALGENG)
	if ((opts & OPENSSL_INIT_ENGINE_AFALG)
	&& !RUN_ONCE(&engine_afalg, ossl_init_engine_afalg))
	return 0;
	# endif
	# endif
	if (opts & (OPENSSL_INIT_ENGINE_ALL_BUILTIN
	\| OPENSSL_INIT_ENGINE_OPENSSL
	\| OPENSSL_INIT_ENGINE_AFALG)) {
	ENGINE_register_all_complete();
	}
	#endif

	if (!CRYPTO_atomic_or(&optsdone, opts, &tmp, init_lock))
	return 0;

	return 1;
	}

	int OPENSSL_atexit(void (*handler)(void))
	{
	OPENSSL_INIT_STOP *newhand;

	#if !defined(OPENSSL_USE_NODELETE)\
	&& !defined(OPENSSL_NO_PINSHARED)
	{
	union {
	void *sym;
	void (*func)(void);
	} handlersym;

	handlersym.func = handler;
	# if defined(DSO_WIN32) && !defined(_WIN32_WCE)
	{
	HMODULE handle = NULL;
	BOOL ret;

	/*
	* We don't use the DSO route for WIN32 because there is a better
	* way
	*/
	ret = GetModuleHandleEx(GET_MODULE_HANDLE_EX_FLAG_FROM_ADDRESS
	\| GET_MODULE_HANDLE_EX_FLAG_PIN,
	handlersym.sym, &handle);

	if (!ret)
	return 0;
	}
	# elif !defined(DSO_NONE)
	/*
	* Deliberately leak a reference to the handler. This will force the
	* library/code containing the handler to remain loaded until we run the
	* atexit handler. If -znodelete has been used then this is
	* unnecessary.
	*/
	{
	DSO *dso = NULL;

	ERR_set_mark();
	dso = DSO_dsobyaddr(handlersym.sym, DSO_FLAG_NO_UNLOAD_ON_FREE);
	/* See same code above in ossl_init_base() for an explanation. */
	OSSL_TRACE1(INIT,
	"atexit: obtained DSO reference? %s\n",
	(dso == NULL ? "No!" : "Yes."));
	DSO_free(dso);
	ERR_pop_to_mark();
	}
	# endif
	}
	#endif

	if ((newhand = OPENSSL_malloc(sizeof(*newhand))) == NULL) {
	ERR_raise(ERR_LIB_CRYPTO, ERR_R_MALLOC_FAILURE);
	return 0;
	}

	newhand->handler = handler;
	newhand->next = stop_handlers;
	stop_handlers = newhand;

	return 1;
	}