| #! /usr/bin/env perl |
| # Copyright 2015-2022 The OpenSSL Project Authors. All Rights Reserved. |
| # |
| # Licensed under the Apache License 2.0 (the "License"). You may not use |
| # this file except in compliance with the License. You can obtain a copy |
| # in the file LICENSE in the source distribution or at |
| # https://www.openssl.org/source/license.html |
| |
| |
| use strict; |
| use warnings; |
| |
| use POSIX; |
| use File::Basename; |
| use File::Copy; |
| use OpenSSL::Test qw/:DEFAULT with bldtop_file bldtop_dir srctop_file srctop_dir cmdstr data_file/; |
| use OpenSSL::Test::Utils; |
| |
| BEGIN { |
| setup("test_ssl_old"); |
| } |
| |
| use lib srctop_dir('Configurations'); |
| use lib bldtop_dir('.'); |
| |
| my $no_fips = disabled('fips') || ($ENV{NO_FIPS} // 0); |
| my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_psk, |
| $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2, $no_tls1_3, |
| $no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) = |
| anydisabled qw/rsa dsa dh ec psk |
| ssl3 tls1 tls1_1 tls1_2 tls1_3 |
| dtls dtls1 dtls1_2 ct/; |
| #If ec and dh are disabled then don't use TLSv1.3 |
| $no_tls1_3 = 1 if (!$no_tls1_3 && $no_ec && $no_dh); |
| my $no_anytls = alldisabled(available_protocols("tls")); |
| my $no_anydtls = alldisabled(available_protocols("dtls")); |
| |
| plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build" |
| if $no_anytls && $no_anydtls; |
| |
| my $digest = "-sha1"; |
| my @reqcmd = ("openssl", "req"); |
| my @x509cmd = ("openssl", "x509", $digest); |
| my @verifycmd = ("openssl", "verify"); |
| my @genpkeycmd = ("openssl", "genpkey"); |
| my $dummycnf = srctop_file("apps", "openssl.cnf"); |
| |
| my $cnf = srctop_file("test", "ca-and-certs.cnf"); |
| my $CAkey = srctop_file("test", "certs", "ca-key.pem"); # "keyCA.ss" |
| my $CAcert="certCA.ss"; |
| my $CAserial="certCA.srl"; |
| my $CAreq="reqCA.ss"; |
| my $CAreq2="req2CA.ss"; # temp |
| my $Ukey = srctop_file("test", "certs", "ee-key.pem"); # "keyU.ss"; |
| my $Ureq="reqU.ss"; |
| my $Ucert="certU.ss"; |
| my $Dkey="keyD.ss"; |
| my $Dreq="reqD.ss"; |
| my $Dcert="certD.ss"; |
| my $Ekey="keyE.ss"; |
| my $Ereq="reqE.ss"; |
| my $Ecert="certE.ss"; |
| |
| my $proxycnf=srctop_file("test", "proxy.cnf"); |
| my $P1key= srctop_file("test", "certs", "alt1-key.pem"); # "keyP1.ss"; |
| my $P1req="reqP1.ss"; |
| my $P1cert="certP1.ss"; |
| my $P1intermediate="tmp_intP1.ss"; |
| my $P2key= srctop_file("test", "certs", "alt2-key.pem"); # "keyP2.ss"; |
| my $P2req="reqP2.ss"; |
| my $P2cert="certP2.ss"; |
| my $P2intermediate="tmp_intP2.ss"; |
| |
| my $server_sess="server.ss"; |
| my $client_sess="client.ss"; |
| |
| # ssl_old_test.c is deprecated in favour of the new framework in ssl_test.c |
| # If you're adding tests here, you probably want to convert them to the |
| # new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead. |
| plan tests => |
| ($no_fips ? 0 : 5) # testssl with fips provider |
| + 1 # For testss |
| + 5 # For the testssl with default provider |
| ; |
| |
| subtest 'test_ss' => sub { |
| if (testss()) { |
| open OUT, ">", "intP1.ss"; |
| copy($CAcert, \*OUT); copy($Ucert, \*OUT); |
| close OUT; |
| |
| open OUT, ">", "intP2.ss"; |
| copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT); |
| close OUT; |
| } |
| }; |
| |
| note('test_ssl_old -- key U'); |
| my $configfile = srctop_file("test","default-and-legacy.cnf"); |
| if (disabled("legacy")) { |
| $configfile = srctop_file("test","default.cnf"); |
| } |
| |
| testssl($Ukey, $Ucert, $CAcert, "default", $configfile); |
| unless ($no_fips) { |
| testssl($Ukey, $Ucert, $CAcert, "fips", |
| srctop_file("test","fips-and-base.cnf")); |
| } |
| |
| # ----------- |
| # subtest functions |
| sub testss { |
| my @req_dsa = ("-newkey", |
| "dsa:".data_file("dsa2048.pem")); |
| my $dsaparams = data_file("dsa2048.pem"); |
| my @req_new; |
| if ($no_rsa) { |
| @req_new = @req_dsa; |
| } else { |
| @req_new = ("-new"); |
| } |
| |
| plan tests => 17; |
| |
| SKIP: { |
| skip 'failure', 16 unless |
| ok(run(app([@reqcmd, "-config", $cnf, |
| "-out", $CAreq, "-key", $CAkey, |
| @req_new])), |
| 'make cert request'); |
| |
| skip 'failure', 15 unless |
| ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30", |
| "-req", "-out", $CAcert, "-signkey", $CAkey, |
| "-extfile", $cnf, "-extensions", "v3_ca"], |
| stdout => "err.ss")), |
| 'convert request into self-signed cert'); |
| |
| skip 'failure', 14 unless |
| ok(run(app([@x509cmd, "-in", $CAcert, |
| "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2], |
| stdout => "err.ss")), |
| 'convert cert into a cert request'); |
| |
| skip 'failure', 13 unless |
| ok(run(app([@reqcmd, "-config", $dummycnf, |
| "-verify", "-in", $CAreq, "-noout"])), |
| 'verify request 1'); |
| |
| |
| skip 'failure', 12 unless |
| ok(run(app([@reqcmd, "-config", $dummycnf, |
| "-verify", "-in", $CAreq2, "-noout"])), |
| 'verify request 2'); |
| |
| skip 'failure', 11 unless |
| ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])), |
| 'verify signature'); |
| |
| skip 'failure', 10 unless |
| ok(run(app([@reqcmd, "-config", $cnf, "-section", "userreq", |
| "-out", $Ureq, "-key", $Ukey, @req_new], |
| stdout => "err.ss")), |
| 'make a user cert request'); |
| |
| skip 'failure', 9 unless |
| ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30", |
| "-req", "-out", $Ucert, |
| "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial, |
| "-extfile", $cnf, "-extensions", "v3_ee"], |
| stdout => "err.ss")) |
| && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])), |
| 'sign user cert request'); |
| |
| skip 'failure', 8 unless |
| ok(run(app([@x509cmd, |
| "-subject", "-issuer", "-startdate", "-enddate", |
| "-noout", "-in", $Ucert])), |
| 'Certificate details'); |
| |
| skip 'failure', 7 unless |
| subtest 'DSA certificate creation' => sub { |
| plan skip_all => "skipping DSA certificate creation" |
| if $no_dsa; |
| |
| plan tests => 5; |
| |
| SKIP: { |
| $ENV{CN2} = "DSA Certificate"; |
| skip 'failure', 4 unless |
| ok(run(app([@genpkeycmd, "-out", $Dkey, |
| "-paramfile", $dsaparams], |
| stdout => "err.ss")), |
| "make a DSA key"); |
| skip 'failure', 3 unless |
| ok(run(app([@reqcmd, "-new", "-config", $cnf, |
| "-section", "userreq", |
| "-out", $Dreq, "-key", $Dkey], |
| stdout => "err.ss")), |
| "make a DSA user cert request"); |
| skip 'failure', 2 unless |
| ok(run(app([@x509cmd, "-CAcreateserial", |
| "-in", $Dreq, |
| "-days", "30", |
| "-req", |
| "-out", $Dcert, |
| "-CA", $CAcert, "-CAkey", $CAkey, |
| "-CAserial", $CAserial, |
| "-extfile", $cnf, |
| "-extensions", "v3_ee_dsa"], |
| stdout => "err.ss")), |
| "sign DSA user cert request"); |
| skip 'failure', 1 unless |
| ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])), |
| "verify DSA user cert"); |
| skip 'failure', 0 unless |
| ok(run(app([@x509cmd, |
| "-subject", "-issuer", |
| "-startdate", "-enddate", "-noout", |
| "-in", $Dcert])), |
| "DSA Certificate details"); |
| } |
| }; |
| |
| skip 'failure', 6 unless |
| subtest 'ECDSA/ECDH certificate creation' => sub { |
| plan skip_all => "skipping ECDSA/ECDH certificate creation" |
| if $no_ec; |
| |
| plan tests => 5; |
| |
| SKIP: { |
| $ENV{CN2} = "ECDSA Certificate"; |
| skip 'failure', 4 unless |
| ok(run(app(["openssl", "genpkey", "-genparam", |
| "-algorithm", "EC", |
| "-pkeyopt", "ec_paramgen_curve:P-256", |
| "-pkeyopt", "ec_param_enc:named_curve", |
| "-out", "ecp.ss"])), |
| "make EC parameters"); |
| skip 'failure', 3 unless |
| ok(run(app([@reqcmd, "-config", $cnf, |
| "-section", "userreq", |
| "-out", $Ereq, "-keyout", $Ekey, |
| "-newkey", "ec:ecp.ss"], |
| stdout => "err.ss")), |
| "make a ECDSA/ECDH user cert request"); |
| skip 'failure', 2 unless |
| ok(run(app([@x509cmd, "-CAcreateserial", |
| "-in", $Ereq, |
| "-days", "30", |
| "-req", |
| "-out", $Ecert, |
| "-CA", $CAcert, "-CAkey", $CAkey, |
| "-CAserial", $CAserial, |
| "-extfile", $cnf, |
| "-extensions", "v3_ee_ec"], |
| stdout => "err.ss")), |
| "sign ECDSA/ECDH user cert request"); |
| skip 'failure', 1 unless |
| ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])), |
| "verify ECDSA/ECDH user cert"); |
| skip 'failure', 0 unless |
| ok(run(app([@x509cmd, |
| "-subject", "-issuer", |
| "-startdate", "-enddate", "-noout", |
| "-in", $Ecert])), |
| "ECDSA Certificate details"); |
| } |
| }; |
| |
| skip 'failure', 5 unless |
| ok(run(app([@reqcmd, "-config", $proxycnf, |
| "-out", $P1req, "-key", $P1key, @req_new], |
| stdout => "err.ss")), |
| 'make a proxy cert request'); |
| |
| |
| skip 'failure', 4 unless |
| ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30", |
| "-req", "-out", $P1cert, |
| "-CA", $Ucert, "-CAkey", $Ukey, |
| "-extfile", $proxycnf, "-extensions", "proxy"], |
| stdout => "err.ss")), |
| 'sign proxy with user cert'); |
| |
| copy($Ucert, $P1intermediate); |
| run(app([@verifycmd, "-CAfile", $CAcert, |
| "-untrusted", $P1intermediate, $P1cert])); |
| ok(run(app([@x509cmd, |
| "-subject", "-issuer", "-startdate", "-enddate", |
| "-noout", "-in", $P1cert])), |
| 'Certificate details'); |
| |
| skip 'failure', 2 unless |
| ok(run(app([@reqcmd, "-config", $proxycnf, "-section", "proxy2_req", |
| "-out", $P2req, "-key", $P2key, |
| @req_new], |
| stdout => "err.ss")), |
| 'make another proxy cert request'); |
| |
| |
| skip 'failure', 1 unless |
| ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30", |
| "-req", "-out", $P2cert, |
| "-CA", $P1cert, "-CAkey", $P1key, |
| "-extfile", $proxycnf, "-extensions", "proxy_2"], |
| stdout => "err.ss")), |
| 'sign second proxy cert request with the first proxy cert'); |
| |
| |
| open OUT, ">", $P2intermediate; |
| copy($Ucert, \*OUT); copy($P1cert, \*OUT); |
| close OUT; |
| run(app([@verifycmd, "-CAfile", $CAcert, |
| "-untrusted", $P2intermediate, $P2cert])); |
| ok(run(app([@x509cmd, |
| "-subject", "-issuer", "-startdate", "-enddate", |
| "-noout", "-in", $P2cert])), |
| 'Certificate details'); |
| } |
| } |
| |
| sub testssl { |
| my ($key, $cert, $CAtmp, $provider, $configfile) = @_; |
| my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs")); |
| my @providerflags = ("-provider", $provider); |
| |
| if ($provider eq "default" && !disabled("legacy")) { |
| push @providerflags, "-provider", "legacy"; |
| } |
| |
| my @ssltest = ("ssl_old_test", |
| "-s_key", $key, "-s_cert", $cert, |
| "-c_key", $key, "-c_cert", $cert, |
| "-config", $configfile, |
| @providerflags); |
| |
| |
| my $serverinfo = srctop_file("test","serverinfo.pem"); |
| |
| my $dsa_cert = 0; |
| if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert, |
| "-text", "-noout"]), capture => 1)) { |
| $dsa_cert = 1; |
| } |
| |
| |
| subtest 'standard SSL tests' => sub { |
| ###################################################################### |
| plan tests => 19; |
| |
| SKIP: { |
| skip "SSLv3 is not supported by this OpenSSL build", 4 |
| if disabled("ssl3"); |
| |
| skip "SSLv3 is not supported by the FIPS provider", 4 |
| if $provider eq "fips"; |
| |
| ok(run(test([@ssltest, "-bio_pair", "-ssl3"])), |
| 'test sslv3 via BIO pair'); |
| ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])), |
| 'test sslv3 with server authentication via BIO pair'); |
| ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])), |
| 'test sslv3 with client authentication via BIO pair'); |
| ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])), |
| 'test sslv3 with both server and client authentication via BIO pair'); |
| } |
| |
| SKIP: { |
| skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1 |
| if $no_anytls; |
| |
| ok(run(test([@ssltest, "-bio_pair"])), |
| 'test sslv2/sslv3 via BIO pair'); |
| } |
| |
| SKIP: { |
| skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 14 |
| if $no_anytls; |
| |
| SKIP: { |
| skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert; |
| |
| ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])), |
| 'test sslv2/sslv3 w/o (EC)DHE via BIO pair'); |
| } |
| |
| SKIP: { |
| skip "skipping dhe1024dsa test", 1 |
| if ($no_dh); |
| |
| ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])), |
| 'test sslv2/sslv3 with 1024bit DHE via BIO pair'); |
| } |
| |
| ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])), |
| 'test sslv2/sslv3 with server authentication'); |
| ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])), |
| 'test sslv2/sslv3 with client authentication via BIO pair'); |
| ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])), |
| 'test sslv2/sslv3 with both client and server authentication via BIO pair'); |
| ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])), |
| 'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify'); |
| |
| SKIP: { |
| skip "No IPv4 available on this machine", 4 |
| unless !disabled("sock") && have_IPv4(); |
| ok(run(test([@ssltest, "-ipv4"])), |
| 'test TLS via IPv4'); |
| ok(run(test([@ssltest, "-ipv4", "-client_ktls"])), |
| 'test TLS via IPv4 + ktls(client)'); |
| ok(run(test([@ssltest, "-ipv4", "-server_ktls"])), |
| 'test TLS via IPv4 + ktls(server)'); |
| ok(run(test([@ssltest, "-ipv4", "-client_ktls", "-server_ktls"])), |
| 'test TLS via IPv4 + ktls'); |
| } |
| |
| SKIP: { |
| skip "No IPv6 available on this machine", 4 |
| unless !disabled("sock") && have_IPv6(); |
| ok(run(test([@ssltest, "-ipv6"])), |
| 'test TLS via IPv6'); |
| ok(run(test([@ssltest, "-ipv6", "-client_ktls"])), |
| 'test TLS via IPv6 + ktls(client)'); |
| ok(run(test([@ssltest, "-ipv6", "-server_ktls"])), |
| 'test TLS via IPv6 + ktls(client)'); |
| ok(run(test([@ssltest, "-ipv6", "-client_ktls", "-server_ktls"])), |
| 'test TLS via IPv6 + ktls'); |
| } |
| } |
| }; |
| |
| subtest "Testing ciphersuites" => sub { |
| |
| my @exkeys = (); |
| my $ciphers = '-PSK:-SRP:@SECLEVEL=0'; |
| |
| if (!$no_dsa) { |
| push @exkeys, "-s_cert", "certD.ss", "-s_key", $Dkey; |
| } |
| |
| if (!$no_ec) { |
| push @exkeys, "-s_cert", "certE.ss", "-s_key", $Ekey; |
| } |
| |
| my @protocols = (); |
| # We only use the flags that ssl_old_test understands |
| push @protocols, "-tls1_3" unless $no_tls1_3; |
| push @protocols, "-tls1_2" unless $no_tls1_2; |
| push @protocols, "-tls1" unless $no_tls1 || $provider eq "fips"; |
| push @protocols, "-ssl3" unless $no_ssl3 || $provider eq "fips"; |
| my $protocolciphersuitecount = 0; |
| my %ciphersuites = (); |
| my %ciphersstatus = (); |
| #There's no "-config" option to the ciphers command so we set the |
| #environment variable instead |
| my $opensslconf = $ENV{OPENSSL_CONF}; |
| $ENV{OPENSSL_CONF} = $configfile; |
| foreach my $protocol (@protocols) { |
| my $ciphersstatus = undef; |
| my @ciphers = run(app(["openssl", "ciphers", "-s", $protocol, |
| @providerflags, |
| "ALL:$ciphers"]), |
| capture => 1, statusvar => \$ciphersstatus); |
| $ciphersstatus{$protocol} = $ciphersstatus; |
| if ($ciphersstatus) { |
| $ciphersuites{$protocol} = [ map { s|\R||; split(/:/, $_) } |
| @ciphers ]; |
| $protocolciphersuitecount += scalar @{$ciphersuites{$protocol}}; |
| } |
| } |
| $ENV{OPENSSL_CONF} = $opensslconf; |
| |
| plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build" |
| if $protocolciphersuitecount + scalar(keys %ciphersuites) == 0; |
| |
| # The count of protocols is because in addition to the ciphersuites |
| # we got above, we're running a weak DH test for each protocol (except |
| # TLSv1.3) |
| my $testcount = scalar(@protocols) + $protocolciphersuitecount |
| + scalar(keys %ciphersuites); |
| $testcount-- unless $no_tls1_3; |
| plan tests => $testcount; |
| |
| foreach my $protocol (@protocols) { |
| ok($ciphersstatus{$protocol}, "Getting ciphers for $protocol"); |
| } |
| |
| foreach my $protocol (sort keys %ciphersuites) { |
| note "Testing ciphersuites for $protocol"; |
| # ssl_old_test doesn't know -tls1_3, but that's fine, since that's |
| # the default choice if TLSv1.3 enabled |
| my $flag = $protocol eq "-tls1_3" ? "" : $protocol; |
| my $ciphersuites = ""; |
| foreach my $cipher (@{$ciphersuites{$protocol}}) { |
| if ($protocol eq "-ssl3" && $cipher =~ /ECDH/ ) { |
| note "*****SKIPPING $protocol $cipher"; |
| ok(1); |
| } else { |
| if ($protocol eq "-tls1_3") { |
| $ciphersuites = $cipher; |
| $cipher = ""; |
| } else { |
| $cipher = $cipher.':@SECLEVEL=0'; |
| } |
| ok(run(test([@ssltest, @exkeys, "-cipher", |
| $cipher, |
| "-ciphersuites", $ciphersuites, |
| $flag || ()])), |
| "Testing $cipher"); |
| } |
| } |
| next if $protocol eq "-tls1_3"; |
| |
| SKIP: { |
| skip "skipping dhe512 test", 1 |
| if ($no_dh); |
| |
| is(run(test([@ssltest, |
| "-s_cipher", "EDH", |
| "-c_cipher", 'EDH:@SECLEVEL=1', |
| "-dhe512", |
| $protocol])), 0, |
| "testing connection with weak DH, expecting failure"); |
| } |
| } |
| }; |
| |
| subtest 'RSA/(EC)DHE/PSK tests' => sub { |
| ###################################################################### |
| |
| plan tests => 10; |
| |
| SKIP: { |
| skip "TLSv1.0 is not supported by this OpenSSL build", 6 |
| if $no_tls1 || $provider eq "fips"; |
| |
| SKIP: { |
| skip "skipping anonymous DH tests", 1 |
| if ($no_dh); |
| |
| ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])), |
| 'test tlsv1 with 1024bit anonymous DH, multiple handshakes'); |
| } |
| |
| SKIP: { |
| skip "skipping RSA tests", 2 |
| if $no_rsa; |
| |
| ok(run(test(["ssl_old_test", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])), |
| 'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes'); |
| |
| skip "skipping RSA+DHE tests", 1 |
| if $no_dh; |
| |
| ok(run(test(["ssl_old_test", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])), |
| 'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes'); |
| } |
| |
| SKIP: { |
| skip "skipping PSK tests", 2 |
| if ($no_psk); |
| |
| ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])), |
| 'test tls1 with PSK'); |
| |
| ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])), |
| 'test tls1 with PSK via BIO pair'); |
| } |
| |
| SKIP: { |
| skip "skipping auto DH PSK tests", 1 |
| if ($no_dh || $no_psk); |
| |
| ok(run(test(['ssl_old_test', '-psk', '0102030405', '-cipher', '@SECLEVEL=2:DHE-PSK-AES128-CCM'])), |
| 'test auto DH meets security strength'); |
| } |
| } |
| |
| SKIP: { |
| skip "TLSv1.1 is not supported by this OpenSSL build", 4 |
| if $no_tls1_1; |
| |
| SKIP: { |
| skip "skipping auto DHE PSK test at SECLEVEL 3", 1 |
| if ($no_dh || $no_psk); |
| |
| ok(run(test(['ssl_old_test', '-tls1_1', '-dhe4096', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:DHE-PSK-AES256-CBC-SHA384'])), |
| 'test auto DHE PSK meets security strength'); |
| } |
| |
| SKIP: { |
| skip "skipping auto ECDHE PSK test at SECLEVEL 3", 1 |
| if ($no_ec || $no_psk); |
| |
| ok(run(test(['ssl_old_test', '-tls1_1', '-no_dhe', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:ECDHE-PSK-AES256-CBC-SHA384'])), |
| 'test auto ECDHE PSK meets security strength'); |
| } |
| |
| SKIP: { |
| skip "skipping no RSA PSK at SECLEVEL 3 test", 1 |
| if ($no_rsa || $no_psk); |
| |
| ok(!run(test(['ssl_old_test', '-tls1_1', '-no_dhe', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:RSA-PSK-AES256-CBC-SHA384'])), |
| 'test auto RSA PSK does not meet security level 3 requirements (PFS)'); |
| } |
| |
| SKIP: { |
| skip "skipping no PSK at SECLEVEL 3 test", 1 |
| if ($no_psk); |
| |
| ok(!run(test(['ssl_old_test', '-tls1_1', '-no_dhe', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:PSK-AES256-CBC-SHA384'])), |
| 'test auto PSK does not meet security level 3 requirements (PFS)'); |
| } |
| } |
| |
| }; |
| |
| subtest 'Custom Extension tests' => sub { |
| ###################################################################### |
| |
| plan tests => 1; |
| |
| SKIP: { |
| skip "TLSv1.0 is not supported by this OpenSSL build", 1 |
| if $no_tls1 || $provider eq "fips"; |
| |
| ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])), |
| 'test tls1 with custom extensions'); |
| } |
| }; |
| |
| subtest 'Serverinfo tests' => sub { |
| ###################################################################### |
| |
| plan tests => 5; |
| |
| SKIP: { |
| skip "TLSv1.0 is not supported by this OpenSSL build", 5 |
| if $no_tls1 || $provider eq "fips"; |
| |
| note('echo test tls1 with serverinfo'); |
| ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo]))); |
| ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"]))); |
| ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"]))); |
| ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"]))); |
| ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"]))); |
| } |
| }; |
| } |
