| /* |
| * Copyright 2022-2025 The OpenSSL Project Authors. All Rights Reserved. |
| * |
| * Licensed under the Apache License 2.0 (the "License"). You may not use |
| * this file except in compliance with the License. You can obtain a copy |
| * in the file LICENSE in the source distribution or at |
| * https://www.openssl.org/source/license.html |
| */ |
| |
| #include <openssl/rand.h> |
| #include <openssl/err.h> |
| #include "internal/ssl_unwrap.h" |
| #include "internal/quic_channel.h" |
| #include "internal/quic_error.h" |
| #include "internal/quic_rx_depack.h" |
| #include "internal/quic_lcidm.h" |
| #include "internal/quic_srtm.h" |
| #include "internal/qlog_event_helpers.h" |
| #include "internal/quic_txp.h" |
| #include "internal/quic_tls.h" |
| #include "internal/quic_ssl.h" |
| #include "../ssl_local.h" |
| #include "quic_channel_local.h" |
| #include "quic_port_local.h" |
| #include "quic_engine_local.h" |
| |
| #define INIT_CRYPTO_RECV_BUF_LEN 16384 |
| #define INIT_CRYPTO_SEND_BUF_LEN 16384 |
| #define INIT_APP_BUF_LEN 8192 |
| |
| /* |
| * Interval before we force a PING to ensure NATs don't timeout. This is based |
| * on the lowest commonly seen value of 30 seconds as cited in RFC 9000 s. |
| * 10.1.2. |
| */ |
| #define MAX_NAT_INTERVAL (ossl_ms2time(25000)) |
| |
| /* |
| * Our maximum ACK delay on the TX side. This is up to us to choose. Note that |
| * this could differ from QUIC_DEFAULT_MAX_DELAY in future as that is a protocol |
| * value which determines the value of the maximum ACK delay if the |
| * max_ack_delay transport parameter is not set. |
| */ |
| #define DEFAULT_MAX_ACK_DELAY QUIC_DEFAULT_MAX_ACK_DELAY |
| |
| DEFINE_LIST_OF_IMPL(ch, QUIC_CHANNEL); |
| |
| static void ch_save_err_state(QUIC_CHANNEL *ch); |
| static int ch_rx(QUIC_CHANNEL *ch, int channel_only, int *notify_other_threads); |
| static int ch_tx(QUIC_CHANNEL *ch, int *notify_other_threads); |
| static int ch_tick_tls(QUIC_CHANNEL *ch, int channel_only, int *notify_other_threads); |
| static void ch_rx_handle_packet(QUIC_CHANNEL *ch, int channel_only); |
| static OSSL_TIME ch_determine_next_tick_deadline(QUIC_CHANNEL *ch); |
| static int ch_retry(QUIC_CHANNEL *ch, |
| const unsigned char *retry_token, |
| size_t retry_token_len, |
| const QUIC_CONN_ID *retry_scid, |
| int drop_later_pn); |
| static int ch_restart(QUIC_CHANNEL *ch); |
| |
| static void ch_cleanup(QUIC_CHANNEL *ch); |
| static int ch_generate_transport_params(QUIC_CHANNEL *ch); |
| static int ch_on_transport_params(const unsigned char *params, |
| size_t params_len, |
| void *arg); |
| static int ch_on_handshake_alert(void *arg, unsigned char alert_code); |
| static int ch_on_handshake_complete(void *arg); |
| static int ch_on_handshake_yield_secret(uint32_t prot_level, int direction, |
| uint32_t suite_id, EVP_MD *md, |
| const unsigned char *secret, |
| size_t secret_len, |
| void *arg); |
| static int ch_on_crypto_recv_record(const unsigned char **buf, |
| size_t *bytes_read, void *arg); |
| static int ch_on_crypto_release_record(size_t bytes_read, void *arg); |
| static int crypto_ensure_empty(QUIC_RSTREAM *rstream); |
| static int ch_on_crypto_send(const unsigned char *buf, size_t buf_len, |
| size_t *consumed, void *arg); |
| static OSSL_TIME get_time(void *arg); |
| static uint64_t get_stream_limit(int uni, void *arg); |
| static int rx_late_validate(QUIC_PN pn, int pn_space, void *arg); |
| static void rxku_detected(QUIC_PN pn, void *arg); |
| static int ch_retry(QUIC_CHANNEL *ch, |
| const unsigned char *retry_token, |
| size_t retry_token_len, |
| const QUIC_CONN_ID *retry_scid, |
| int drop_later_pn); |
| static void ch_update_idle(QUIC_CHANNEL *ch); |
| static int ch_discard_el(QUIC_CHANNEL *ch, |
| uint32_t enc_level); |
| static void ch_on_idle_timeout(QUIC_CHANNEL *ch); |
| static void ch_update_idle(QUIC_CHANNEL *ch); |
| static void ch_update_ping_deadline(QUIC_CHANNEL *ch); |
| static void ch_on_terminating_timeout(QUIC_CHANNEL *ch); |
| static void ch_start_terminating(QUIC_CHANNEL *ch, |
| const QUIC_TERMINATE_CAUSE *tcause, |
| int force_immediate); |
| static void ch_on_txp_ack_tx(const OSSL_QUIC_FRAME_ACK *ack, uint32_t pn_space, |
| void *arg); |
| static void ch_rx_handle_version_neg(QUIC_CHANNEL *ch, OSSL_QRX_PKT *pkt); |
| static void ch_raise_version_neg_failure(QUIC_CHANNEL *ch); |
| static void ch_record_state_transition(QUIC_CHANNEL *ch, uint32_t new_state); |
| |
| DEFINE_LHASH_OF_EX(QUIC_SRT_ELEM); |
| |
| QUIC_NEEDS_LOCK |
| static QLOG *ch_get_qlog(QUIC_CHANNEL *ch) |
| { |
| #ifndef OPENSSL_NO_QLOG |
| QLOG_TRACE_INFO qti = {0}; |
| |
| if (ch->qlog != NULL) |
| return ch->qlog; |
| |
| if (!ch->use_qlog) |
| return NULL; |
| |
| if (ch->is_server && ch->init_dcid.id_len == 0) |
| return NULL; |
| |
| qti.odcid = ch->init_dcid; |
| qti.title = ch->qlog_title; |
| qti.description = NULL; |
| qti.group_id = NULL; |
| qti.is_server = ch->is_server; |
| qti.now_cb = get_time; |
| qti.now_cb_arg = ch; |
| if ((ch->qlog = ossl_qlog_new_from_env(&qti)) == NULL) { |
| ch->use_qlog = 0; /* don't try again */ |
| return NULL; |
| } |
| |
| return ch->qlog; |
| #else |
| return NULL; |
| #endif |
| } |
| |
| QUIC_NEEDS_LOCK |
| static QLOG *ch_get_qlog_cb(void *arg) |
| { |
| QUIC_CHANNEL *ch = arg; |
| |
| return ch_get_qlog(ch); |
| } |
| |
| /* |
| * QUIC Channel Initialization and Teardown |
| * ======================================== |
| */ |
| #define DEFAULT_INIT_CONN_RXFC_WND (768 * 1024) |
| #define DEFAULT_CONN_RXFC_MAX_WND_MUL 20 |
| |
| #define DEFAULT_INIT_STREAM_RXFC_WND (512 * 1024) |
| #define DEFAULT_STREAM_RXFC_MAX_WND_MUL 12 |
| |
| #define DEFAULT_INIT_CONN_MAX_STREAMS 100 |
| |
| static int ch_init(QUIC_CHANNEL *ch) |
| { |
| OSSL_QUIC_TX_PACKETISER_ARGS txp_args = {0}; |
| OSSL_QTX_ARGS qtx_args = {0}; |
| OSSL_QRX_ARGS qrx_args = {0}; |
| QUIC_TLS_ARGS tls_args = {0}; |
| uint32_t pn_space; |
| size_t rx_short_dcid_len; |
| size_t tx_init_dcid_len; |
| |
| if (ch->port == NULL || ch->lcidm == NULL || ch->srtm == NULL) |
| goto err; |
| |
| rx_short_dcid_len = ossl_quic_port_get_rx_short_dcid_len(ch->port); |
| tx_init_dcid_len = ossl_quic_port_get_tx_init_dcid_len(ch->port); |
| |
| /* For clients, generate our initial DCID. */ |
| if (!ch->is_server |
| && !ossl_quic_gen_rand_conn_id(ch->port->engine->libctx, tx_init_dcid_len, |
| &ch->init_dcid)) |
| goto err; |
| |
| /* We plug in a network write BIO to the QTX later when we get one. */ |
| qtx_args.libctx = ch->port->engine->libctx; |
| qtx_args.get_qlog_cb = ch_get_qlog_cb; |
| qtx_args.get_qlog_cb_arg = ch; |
| qtx_args.mdpl = QUIC_MIN_INITIAL_DGRAM_LEN; |
| ch->rx_max_udp_payload_size = qtx_args.mdpl; |
| |
| ch->ping_deadline = ossl_time_infinite(); |
| |
| ch->qtx = ossl_qtx_new(&qtx_args); |
| if (ch->qtx == NULL) |
| goto err; |
| |
| ch->txpim = ossl_quic_txpim_new(); |
| if (ch->txpim == NULL) |
| goto err; |
| |
| ch->cfq = ossl_quic_cfq_new(); |
| if (ch->cfq == NULL) |
| goto err; |
| |
| if (!ossl_quic_txfc_init(&ch->conn_txfc, NULL)) |
| goto err; |
| |
| /* |
| * Note: The TP we transmit governs what the peer can transmit and thus |
| * applies to the RXFC. |
| */ |
| ch->tx_init_max_stream_data_bidi_local = DEFAULT_INIT_STREAM_RXFC_WND; |
| ch->tx_init_max_stream_data_bidi_remote = DEFAULT_INIT_STREAM_RXFC_WND; |
| ch->tx_init_max_stream_data_uni = DEFAULT_INIT_STREAM_RXFC_WND; |
| |
| if (!ossl_quic_rxfc_init(&ch->conn_rxfc, NULL, |
| DEFAULT_INIT_CONN_RXFC_WND, |
| DEFAULT_CONN_RXFC_MAX_WND_MUL * |
| DEFAULT_INIT_CONN_RXFC_WND, |
| get_time, ch)) |
| goto err; |
| |
| for (pn_space = QUIC_PN_SPACE_INITIAL; pn_space < QUIC_PN_SPACE_NUM; ++pn_space) |
| if (!ossl_quic_rxfc_init_standalone(&ch->crypto_rxfc[pn_space], |
| INIT_CRYPTO_RECV_BUF_LEN, |
| get_time, ch)) |
| goto err; |
| |
| if (!ossl_quic_rxfc_init_standalone(&ch->max_streams_bidi_rxfc, |
| DEFAULT_INIT_CONN_MAX_STREAMS, |
| get_time, ch)) |
| goto err; |
| |
| if (!ossl_quic_rxfc_init_standalone(&ch->max_streams_uni_rxfc, |
| DEFAULT_INIT_CONN_MAX_STREAMS, |
| get_time, ch)) |
| goto err; |
| |
| if (!ossl_statm_init(&ch->statm)) |
| goto err; |
| |
| ch->have_statm = 1; |
| ch->cc_method = &ossl_cc_newreno_method; |
| if ((ch->cc_data = ch->cc_method->new(get_time, ch)) == NULL) |
| goto err; |
| |
| if ((ch->ackm = ossl_ackm_new(get_time, ch, &ch->statm, |
| ch->cc_method, ch->cc_data)) == NULL) |
| goto err; |
| |
| if (!ossl_quic_stream_map_init(&ch->qsm, get_stream_limit, ch, |
| &ch->max_streams_bidi_rxfc, |
| &ch->max_streams_uni_rxfc, |
| ch->is_server)) |
| goto err; |
| |
| ch->have_qsm = 1; |
| |
| if (!ch->is_server |
| && !ossl_quic_lcidm_generate_initial(ch->lcidm, ch, &ch->init_scid)) |
| goto err; |
| |
| txp_args.cur_scid = ch->init_scid; |
| txp_args.cur_dcid = ch->init_dcid; |
| txp_args.ack_delay_exponent = 3; |
| txp_args.qtx = ch->qtx; |
| txp_args.txpim = ch->txpim; |
| txp_args.cfq = ch->cfq; |
| txp_args.ackm = ch->ackm; |
| txp_args.qsm = &ch->qsm; |
| txp_args.conn_txfc = &ch->conn_txfc; |
| txp_args.conn_rxfc = &ch->conn_rxfc; |
| txp_args.max_streams_bidi_rxfc = &ch->max_streams_bidi_rxfc; |
| txp_args.max_streams_uni_rxfc = &ch->max_streams_uni_rxfc; |
| txp_args.cc_method = ch->cc_method; |
| txp_args.cc_data = ch->cc_data; |
| txp_args.now = get_time; |
| txp_args.now_arg = ch; |
| txp_args.get_qlog_cb = ch_get_qlog_cb; |
| txp_args.get_qlog_cb_arg = ch; |
| txp_args.protocol_version = QUIC_VERSION_1; |
| |
| for (pn_space = QUIC_PN_SPACE_INITIAL; pn_space < QUIC_PN_SPACE_NUM; ++pn_space) { |
| ch->crypto_send[pn_space] = ossl_quic_sstream_new(INIT_CRYPTO_SEND_BUF_LEN); |
| if (ch->crypto_send[pn_space] == NULL) |
| goto err; |
| |
| txp_args.crypto[pn_space] = ch->crypto_send[pn_space]; |
| } |
| |
| ch->txp = ossl_quic_tx_packetiser_new(&txp_args); |
| if (ch->txp == NULL) |
| goto err; |
| |
| /* clients have no amplification limit, so are considered always valid */ |
| if (!ch->is_server) |
| ossl_quic_tx_packetiser_set_validated(ch->txp); |
| |
| ossl_quic_tx_packetiser_set_ack_tx_cb(ch->txp, ch_on_txp_ack_tx, ch); |
| |
| /* |
| * qrx does not exist yet, then we must be dealing with client channel |
| * (QUIC connection initiator). |
| * If qrx exists already, then we are dealing with server channel which |
| * qrx gets created by port_default_packet_handler() before |
| * port_default_packet_handler() accepts connection and creates channel |
| * for it. |
| * The exception here is tserver which always creates channel, |
| * before the first packet is ever seen. |
| */ |
| if (ch->qrx == NULL && ch->is_tserver_ch == 0) { |
| /* we are regular client, create channel */ |
| qrx_args.libctx = ch->port->engine->libctx; |
| qrx_args.demux = ch->port->demux; |
| qrx_args.short_conn_id_len = rx_short_dcid_len; |
| qrx_args.max_deferred = 32; |
| |
| if ((ch->qrx = ossl_qrx_new(&qrx_args)) == NULL) |
| goto err; |
| } |
| |
| if (ch->qrx != NULL) { |
| /* |
| * callbacks for channels associated with tserver's port |
| * are set up later when we call ossl_quic_channel_bind_qrx() |
| * in port_default_packet_handler() |
| */ |
| if (!ossl_qrx_set_late_validation_cb(ch->qrx, |
| rx_late_validate, |
| ch)) |
| goto err; |
| |
| if (!ossl_qrx_set_key_update_cb(ch->qrx, |
| rxku_detected, |
| ch)) |
| goto err; |
| } |
| |
| |
| for (pn_space = QUIC_PN_SPACE_INITIAL; pn_space < QUIC_PN_SPACE_NUM; ++pn_space) { |
| ch->crypto_recv[pn_space] = ossl_quic_rstream_new(NULL, NULL, 0); |
| if (ch->crypto_recv[pn_space] == NULL) |
| goto err; |
| } |
| |
| /* Plug in the TLS handshake layer. */ |
| tls_args.s = ch->tls; |
| tls_args.crypto_send_cb = ch_on_crypto_send; |
| tls_args.crypto_send_cb_arg = ch; |
| tls_args.crypto_recv_rcd_cb = ch_on_crypto_recv_record; |
| tls_args.crypto_recv_rcd_cb_arg = ch; |
| tls_args.crypto_release_rcd_cb = ch_on_crypto_release_record; |
| tls_args.crypto_release_rcd_cb_arg = ch; |
| tls_args.yield_secret_cb = ch_on_handshake_yield_secret; |
| tls_args.yield_secret_cb_arg = ch; |
| tls_args.got_transport_params_cb = ch_on_transport_params; |
| tls_args.got_transport_params_cb_arg= ch; |
| tls_args.handshake_complete_cb = ch_on_handshake_complete; |
| tls_args.handshake_complete_cb_arg = ch; |
| tls_args.alert_cb = ch_on_handshake_alert; |
| tls_args.alert_cb_arg = ch; |
| tls_args.is_server = ch->is_server; |
| tls_args.ossl_quic = 1; |
| |
| if ((ch->qtls = ossl_quic_tls_new(&tls_args)) == NULL) |
| goto err; |
| |
| ch->tx_max_ack_delay = DEFAULT_MAX_ACK_DELAY; |
| ch->rx_max_ack_delay = QUIC_DEFAULT_MAX_ACK_DELAY; |
| ch->rx_ack_delay_exp = QUIC_DEFAULT_ACK_DELAY_EXP; |
| ch->rx_active_conn_id_limit = QUIC_MIN_ACTIVE_CONN_ID_LIMIT; |
| ch->tx_enc_level = QUIC_ENC_LEVEL_INITIAL; |
| ch->rx_enc_level = QUIC_ENC_LEVEL_INITIAL; |
| ch->txku_threshold_override = UINT64_MAX; |
| |
| ch->max_idle_timeout_local_req = QUIC_DEFAULT_IDLE_TIMEOUT; |
| ch->max_idle_timeout_remote_req = 0; |
| ch->max_idle_timeout = ch->max_idle_timeout_local_req; |
| |
| ossl_ackm_set_tx_max_ack_delay(ch->ackm, ossl_ms2time(ch->tx_max_ack_delay)); |
| ossl_ackm_set_rx_max_ack_delay(ch->ackm, ossl_ms2time(ch->rx_max_ack_delay)); |
| |
| ch_update_idle(ch); |
| ossl_list_ch_insert_tail(&ch->port->channel_list, ch); |
| ch->on_port_list = 1; |
| return 1; |
| |
| err: |
| ch_cleanup(ch); |
| return 0; |
| } |
| |
| static void ch_cleanup(QUIC_CHANNEL *ch) |
| { |
| uint32_t pn_space; |
| |
| if (ch->ackm != NULL) |
| for (pn_space = QUIC_PN_SPACE_INITIAL; |
| pn_space < QUIC_PN_SPACE_NUM; |
| ++pn_space) |
| ossl_ackm_on_pkt_space_discarded(ch->ackm, pn_space); |
| |
| ossl_quic_lcidm_cull(ch->lcidm, ch); |
| ossl_quic_srtm_cull(ch->srtm, ch); |
| ossl_quic_tx_packetiser_free(ch->txp); |
| ossl_quic_txpim_free(ch->txpim); |
| ossl_quic_cfq_free(ch->cfq); |
| ossl_qtx_free(ch->qtx); |
| if (ch->cc_data != NULL) |
| ch->cc_method->free(ch->cc_data); |
| if (ch->have_statm) |
| ossl_statm_destroy(&ch->statm); |
| ossl_ackm_free(ch->ackm); |
| |
| if (ch->have_qsm) |
| ossl_quic_stream_map_cleanup(&ch->qsm); |
| |
| for (pn_space = QUIC_PN_SPACE_INITIAL; pn_space < QUIC_PN_SPACE_NUM; ++pn_space) { |
| ossl_quic_sstream_free(ch->crypto_send[pn_space]); |
| ossl_quic_rstream_free(ch->crypto_recv[pn_space]); |
| } |
| |
| ossl_qrx_pkt_release(ch->qrx_pkt); |
| ch->qrx_pkt = NULL; |
| |
| ossl_quic_tls_free(ch->qtls); |
| ossl_qrx_free(ch->qrx); |
| OPENSSL_free(ch->local_transport_params); |
| OPENSSL_free((char *)ch->terminate_cause.reason); |
| OSSL_ERR_STATE_free(ch->err_state); |
| OPENSSL_free(ch->ack_range_scratch); |
| OPENSSL_free(ch->pending_new_token); |
| |
| if (ch->on_port_list) { |
| ossl_list_ch_remove(&ch->port->channel_list, ch); |
| ch->on_port_list = 0; |
| } |
| |
| #ifndef OPENSSL_NO_QLOG |
| if (ch->qlog != NULL) |
| ossl_qlog_flush(ch->qlog); /* best effort */ |
| |
| OPENSSL_free(ch->qlog_title); |
| ossl_qlog_free(ch->qlog); |
| #endif |
| } |
| |
| int ossl_quic_channel_init(QUIC_CHANNEL *ch) |
| { |
| return ch_init(ch); |
| } |
| |
| void ossl_quic_channel_bind_qrx(QUIC_CHANNEL *tserver_ch, OSSL_QRX *qrx) |
| { |
| if (tserver_ch->qrx == NULL && tserver_ch->is_tserver_ch == 1) { |
| tserver_ch->qrx = qrx; |
| ossl_qrx_set_late_validation_cb(tserver_ch->qrx, rx_late_validate, |
| tserver_ch); |
| ossl_qrx_set_key_update_cb(tserver_ch->qrx, rxku_detected, |
| tserver_ch); |
| } |
| } |
| |
| QUIC_CHANNEL *ossl_quic_channel_alloc(const QUIC_CHANNEL_ARGS *args) |
| { |
| QUIC_CHANNEL *ch = NULL; |
| |
| if ((ch = OPENSSL_zalloc(sizeof(*ch))) == NULL) |
| return NULL; |
| |
| ch->port = args->port; |
| ch->is_server = args->is_server; |
| ch->tls = args->tls; |
| ch->lcidm = args->lcidm; |
| ch->srtm = args->srtm; |
| ch->qrx = args->qrx; |
| ch->is_tserver_ch = args->is_tserver_ch; |
| #ifndef OPENSSL_NO_QLOG |
| ch->use_qlog = args->use_qlog; |
| |
| if (ch->use_qlog && args->qlog_title != NULL) { |
| if ((ch->qlog_title = OPENSSL_strdup(args->qlog_title)) == NULL) { |
| OPENSSL_free(ch); |
| return NULL; |
| } |
| } |
| #endif |
| |
| return ch; |
| } |
| |
| void ossl_quic_channel_free(QUIC_CHANNEL *ch) |
| { |
| if (ch == NULL) |
| return; |
| |
| ch_cleanup(ch); |
| OPENSSL_free(ch); |
| } |
| |
| /* Set mutator callbacks for test framework support */ |
| int ossl_quic_channel_set_mutator(QUIC_CHANNEL *ch, |
| ossl_mutate_packet_cb mutatecb, |
| ossl_finish_mutate_cb finishmutatecb, |
| void *mutatearg) |
| { |
| if (ch->qtx == NULL) |
| return 0; |
| |
| ossl_qtx_set_mutator(ch->qtx, mutatecb, finishmutatecb, mutatearg); |
| return 1; |
| } |
| |
| int ossl_quic_channel_get_peer_addr(QUIC_CHANNEL *ch, BIO_ADDR *peer_addr) |
| { |
| if (!ch->addressed_mode) |
| return 0; |
| |
| return BIO_ADDR_copy(peer_addr, &ch->cur_peer_addr); |
| } |
| |
| int ossl_quic_channel_set_peer_addr(QUIC_CHANNEL *ch, const BIO_ADDR *peer_addr) |
| { |
| if (ch->state != QUIC_CHANNEL_STATE_IDLE) |
| return 0; |
| |
| if (peer_addr == NULL || BIO_ADDR_family(peer_addr) == AF_UNSPEC) { |
| BIO_ADDR_clear(&ch->cur_peer_addr); |
| ch->addressed_mode = 0; |
| return 1; |
| } |
| |
| if (!BIO_ADDR_copy(&ch->cur_peer_addr, peer_addr)) { |
| ch->addressed_mode = 0; |
| return 0; |
| } |
| ch->addressed_mode = 1; |
| |
| return 1; |
| } |
| |
| QUIC_REACTOR *ossl_quic_channel_get_reactor(QUIC_CHANNEL *ch) |
| { |
| return ossl_quic_port_get0_reactor(ch->port); |
| } |
| |
| QUIC_STREAM_MAP *ossl_quic_channel_get_qsm(QUIC_CHANNEL *ch) |
| { |
| return &ch->qsm; |
| } |
| |
| OSSL_STATM *ossl_quic_channel_get_statm(QUIC_CHANNEL *ch) |
| { |
| return &ch->statm; |
| } |
| |
| SSL *ossl_quic_channel_get0_tls(QUIC_CHANNEL *ch) |
| { |
| return ch->tls; |
| } |
| |
| static void free_buf_mem(unsigned char *buf, size_t buf_len, void *arg) |
| { |
| BUF_MEM_free((BUF_MEM *)arg); |
| } |
| |
| int ossl_quic_channel_schedule_new_token(QUIC_CHANNEL *ch, |
| const unsigned char *token, |
| size_t token_len) |
| { |
| int rc = 0; |
| QUIC_CFQ_ITEM *cfq_item; |
| WPACKET wpkt; |
| BUF_MEM *buf_mem = NULL; |
| size_t l = 0; |
| |
| buf_mem = BUF_MEM_new(); |
| if (buf_mem == NULL) |
| goto err; |
| |
| if (!WPACKET_init(&wpkt, buf_mem)) |
| goto err; |
| |
| if (!ossl_quic_wire_encode_frame_new_token(&wpkt, token, |
| token_len)) { |
| WPACKET_cleanup(&wpkt); |
| goto err; |
| } |
| |
| WPACKET_finish(&wpkt); |
| |
| if (!WPACKET_get_total_written(&wpkt, &l)) |
| goto err; |
| |
| cfq_item = ossl_quic_cfq_add_frame(ch->cfq, 1, |
| QUIC_PN_SPACE_APP, |
| OSSL_QUIC_FRAME_TYPE_NEW_TOKEN, 0, |
| (unsigned char *)buf_mem->data, l, |
| free_buf_mem, |
| buf_mem); |
| if (cfq_item == NULL) |
| goto err; |
| |
| rc = 1; |
| err: |
| if (!rc) |
| BUF_MEM_free(buf_mem); |
| return rc; |
| } |
| |
| size_t ossl_quic_channel_get_short_header_conn_id_len(QUIC_CHANNEL *ch) |
| { |
| return ossl_quic_port_get_rx_short_dcid_len(ch->port); |
| } |
| |
| QUIC_STREAM *ossl_quic_channel_get_stream_by_id(QUIC_CHANNEL *ch, |
| uint64_t stream_id) |
| { |
| return ossl_quic_stream_map_get_by_id(&ch->qsm, stream_id); |
| } |
| |
| int ossl_quic_channel_is_active(const QUIC_CHANNEL *ch) |
| { |
| return ch != NULL && ch->state == QUIC_CHANNEL_STATE_ACTIVE; |
| } |
| |
| int ossl_quic_channel_is_closing(const QUIC_CHANNEL *ch) |
| { |
| return ch->state == QUIC_CHANNEL_STATE_TERMINATING_CLOSING; |
| } |
| |
| static int ossl_quic_channel_is_draining(const QUIC_CHANNEL *ch) |
| { |
| return ch->state == QUIC_CHANNEL_STATE_TERMINATING_DRAINING; |
| } |
| |
| static int ossl_quic_channel_is_terminating(const QUIC_CHANNEL *ch) |
| { |
| return ossl_quic_channel_is_closing(ch) |
| || ossl_quic_channel_is_draining(ch); |
| } |
| |
| int ossl_quic_channel_is_terminated(const QUIC_CHANNEL *ch) |
| { |
| return ch->state == QUIC_CHANNEL_STATE_TERMINATED; |
| } |
| |
| int ossl_quic_channel_is_term_any(const QUIC_CHANNEL *ch) |
| { |
| return ossl_quic_channel_is_terminating(ch) |
| || ossl_quic_channel_is_terminated(ch); |
| } |
| |
| const QUIC_TERMINATE_CAUSE * |
| ossl_quic_channel_get_terminate_cause(const QUIC_CHANNEL *ch) |
| { |
| return ossl_quic_channel_is_term_any(ch) ? &ch->terminate_cause : NULL; |
| } |
| |
| int ossl_quic_channel_is_handshake_complete(const QUIC_CHANNEL *ch) |
| { |
| return ch->handshake_complete; |
| } |
| |
| int ossl_quic_channel_is_handshake_confirmed(const QUIC_CHANNEL *ch) |
| { |
| return ch->handshake_confirmed; |
| } |
| |
| QUIC_DEMUX *ossl_quic_channel_get0_demux(QUIC_CHANNEL *ch) |
| { |
| return ch->port->demux; |
| } |
| |
| QUIC_PORT *ossl_quic_channel_get0_port(QUIC_CHANNEL *ch) |
| { |
| return ch->port; |
| } |
| |
| QUIC_ENGINE *ossl_quic_channel_get0_engine(QUIC_CHANNEL *ch) |
| { |
| return ossl_quic_port_get0_engine(ch->port); |
| } |
| |
| CRYPTO_MUTEX *ossl_quic_channel_get_mutex(QUIC_CHANNEL *ch) |
| { |
| return ossl_quic_port_get0_mutex(ch->port); |
| } |
| |
| int ossl_quic_channel_has_pending(const QUIC_CHANNEL *ch) |
| { |
| return ossl_quic_demux_has_pending(ch->port->demux) |
| || ossl_qrx_processed_read_pending(ch->qrx); |
| } |
| |
| /* |
| * QUIC Channel: Callbacks from Miscellaneous Subsidiary Components |
| * ================================================================ |
| */ |
| |
| /* Used by various components. */ |
| static OSSL_TIME get_time(void *arg) |
| { |
| QUIC_CHANNEL *ch = arg; |
| |
| return ossl_quic_port_get_time(ch->port); |
| } |
| |
| /* Used by QSM. */ |
| static uint64_t get_stream_limit(int uni, void *arg) |
| { |
| QUIC_CHANNEL *ch = arg; |
| |
| return uni ? ch->max_local_streams_uni : ch->max_local_streams_bidi; |
| } |
| |
| /* |
| * Called by QRX to determine if a packet is potentially invalid before trying |
| * to decrypt it. |
| */ |
| static int rx_late_validate(QUIC_PN pn, int pn_space, void *arg) |
| { |
| QUIC_CHANNEL *ch = arg; |
| |
| /* Potential duplicates should not be processed. */ |
| if (!ossl_ackm_is_rx_pn_processable(ch->ackm, pn, pn_space)) |
| return 0; |
| |
| return 1; |
| } |
| |
| /* |
| * Triggers a TXKU (whether spontaneous or solicited). Does not check whether |
| * spontaneous TXKU is currently allowed. |
| */ |
| QUIC_NEEDS_LOCK |
| static void ch_trigger_txku(QUIC_CHANNEL *ch) |
| { |
| uint64_t next_pn |
| = ossl_quic_tx_packetiser_get_next_pn(ch->txp, QUIC_PN_SPACE_APP); |
| |
| if (!ossl_quic_pn_valid(next_pn) |
| || !ossl_qtx_trigger_key_update(ch->qtx)) { |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_INTERNAL_ERROR, 0, |
| "key update"); |
| return; |
| } |
| |
| ch->txku_in_progress = 1; |
| ch->txku_pn = next_pn; |
| ch->rxku_expected = ch->ku_locally_initiated; |
| } |
| |
| QUIC_NEEDS_LOCK |
| static int txku_in_progress(QUIC_CHANNEL *ch) |
| { |
| if (ch->txku_in_progress |
| && ossl_ackm_get_largest_acked(ch->ackm, QUIC_PN_SPACE_APP) >= ch->txku_pn) { |
| OSSL_TIME pto = ossl_ackm_get_pto_duration(ch->ackm); |
| |
| /* |
| * RFC 9001 s. 6.5: Endpoints SHOULD wait three times the PTO before |
| * initiating a key update after receiving an acknowledgment that |
| * confirms that the previous key update was received. |
| * |
| * Note that by the above wording, this period starts from when we get |
| * the ack for a TXKU-triggering packet, not when the TXKU is initiated. |
| * So we defer TXKU cooldown deadline calculation to this point. |
| */ |
| ch->txku_in_progress = 0; |
| ch->txku_cooldown_deadline = ossl_time_add(get_time(ch), |
| ossl_time_multiply(pto, 3)); |
| } |
| |
| return ch->txku_in_progress; |
| } |
| |
| QUIC_NEEDS_LOCK |
| static int txku_allowed(QUIC_CHANNEL *ch) |
| { |
| return ch->tx_enc_level == QUIC_ENC_LEVEL_1RTT /* Sanity check. */ |
| /* Strict RFC 9001 criterion for TXKU. */ |
| && ch->handshake_confirmed |
| && !txku_in_progress(ch); |
| } |
| |
| QUIC_NEEDS_LOCK |
| static int txku_recommendable(QUIC_CHANNEL *ch) |
| { |
| if (!txku_allowed(ch)) |
| return 0; |
| |
| return |
| /* Recommended RFC 9001 criterion for TXKU. */ |
| ossl_time_compare(get_time(ch), ch->txku_cooldown_deadline) >= 0 |
| /* Some additional sensible criteria. */ |
| && !ch->rxku_in_progress |
| && !ch->rxku_pending_confirm; |
| } |
| |
| QUIC_NEEDS_LOCK |
| static int txku_desirable(QUIC_CHANNEL *ch) |
| { |
| uint64_t cur_pkt_count, max_pkt_count, thresh_pkt_count; |
| const uint32_t enc_level = QUIC_ENC_LEVEL_1RTT; |
| |
| /* Check AEAD limit to determine if we should perform a spontaneous TXKU. */ |
| cur_pkt_count = ossl_qtx_get_cur_epoch_pkt_count(ch->qtx, enc_level); |
| max_pkt_count = ossl_qtx_get_max_epoch_pkt_count(ch->qtx, enc_level); |
| |
| thresh_pkt_count = max_pkt_count / 2; |
| if (ch->txku_threshold_override != UINT64_MAX) |
| thresh_pkt_count = ch->txku_threshold_override; |
| |
| return cur_pkt_count >= thresh_pkt_count; |
| } |
| |
| QUIC_NEEDS_LOCK |
| static void ch_maybe_trigger_spontaneous_txku(QUIC_CHANNEL *ch) |
| { |
| if (!txku_recommendable(ch) || !txku_desirable(ch)) |
| return; |
| |
| ch->ku_locally_initiated = 1; |
| ch_trigger_txku(ch); |
| } |
| |
| QUIC_NEEDS_LOCK |
| static int rxku_allowed(QUIC_CHANNEL *ch) |
| { |
| /* |
| * RFC 9001 s. 6.1: An endpoint MUST NOT initiate a key update prior to |
| * having confirmed the handshake (Section 4.1.2). |
| * |
| * RFC 9001 s. 6.1: An endpoint MUST NOT initiate a subsequent key update |
| * unless it has received an acknowledgment for a packet that was sent |
| * protected with keys from the current key phase. |
| * |
| * RFC 9001 s. 6.2: If an endpoint detects a second update before it has |
| * sent any packets with updated keys containing an acknowledgment for the |
| * packet that initiated the key update, it indicates that its peer has |
| * updated keys twice without awaiting confirmation. An endpoint MAY treat |
| * such consecutive key updates as a connection error of type |
| * KEY_UPDATE_ERROR. |
| */ |
| return ch->handshake_confirmed && !ch->rxku_pending_confirm; |
| } |
| |
| /* |
| * Called when the QRX detects a new RX key update event. |
| */ |
| enum rxku_decision { |
| DECISION_RXKU_ONLY, |
| DECISION_PROTOCOL_VIOLATION, |
| DECISION_SOLICITED_TXKU |
| }; |
| |
| /* Called when the QRX detects a key update has occurred. */ |
| QUIC_NEEDS_LOCK |
| static void rxku_detected(QUIC_PN pn, void *arg) |
| { |
| QUIC_CHANNEL *ch = arg; |
| enum rxku_decision decision; |
| OSSL_TIME pto; |
| |
| /* |
| * Note: rxku_in_progress is always 0 here as an RXKU cannot be detected |
| * when we are still in UPDATING or COOLDOWN (see quic_record_rx.h). |
| */ |
| assert(!ch->rxku_in_progress); |
| |
| if (!rxku_allowed(ch)) |
| /* Is RXKU even allowed at this time? */ |
| decision = DECISION_PROTOCOL_VIOLATION; |
| |
| else if (ch->ku_locally_initiated) |
| /* |
| * If this key update was locally initiated (meaning that this detected |
| * RXKU event is a result of our own spontaneous TXKU), we do not |
| * trigger another TXKU; after all, to do so would result in an infinite |
| * ping-pong of key updates. We still process it as an RXKU. |
| */ |
| decision = DECISION_RXKU_ONLY; |
| |
| else |
| /* |
| * Otherwise, a peer triggering a KU means we have to trigger a KU also. |
| */ |
| decision = DECISION_SOLICITED_TXKU; |
| |
| if (decision == DECISION_PROTOCOL_VIOLATION) { |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_KEY_UPDATE_ERROR, |
| 0, "RX key update again too soon"); |
| return; |
| } |
| |
| pto = ossl_ackm_get_pto_duration(ch->ackm); |
| |
| ch->ku_locally_initiated = 0; |
| ch->rxku_in_progress = 1; |
| ch->rxku_pending_confirm = 1; |
| ch->rxku_trigger_pn = pn; |
| ch->rxku_update_end_deadline = ossl_time_add(get_time(ch), pto); |
| ch->rxku_expected = 0; |
| |
| if (decision == DECISION_SOLICITED_TXKU) |
| /* NOT gated by usual txku_allowed() */ |
| ch_trigger_txku(ch); |
| |
| /* |
| * Ordinarily, we only generate ACK when some ACK-eliciting frame has been |
| * received. In some cases, this may not occur for a long time, for example |
| * if transmission of application data is going in only one direction and |
| * nothing else is happening with the connection. However, since the peer |
| * cannot initiate a subsequent (spontaneous) TXKU until its prior |
| * (spontaneous or solicited) TXKU has completed - meaning that prior |
| * TXKU's trigger packet (or subsequent packet) has been acknowledged, this |
| * can lead to very long times before a TXKU is considered 'completed'. |
| * Optimise this by forcing ACK generation after triggering TXKU. |
| * (Basically, we consider a RXKU event something that is 'ACK-eliciting', |
| * which it more or less should be; it is necessarily separate from ordinary |
| * processing of ACK-eliciting frames as key update is not indicated via a |
| * frame.) |
| */ |
| ossl_quic_tx_packetiser_schedule_ack(ch->txp, QUIC_PN_SPACE_APP); |
| } |
| |
| /* Called per tick to handle RXKU timer events. */ |
| QUIC_NEEDS_LOCK |
| static void ch_rxku_tick(QUIC_CHANNEL *ch) |
| { |
| if (!ch->rxku_in_progress |
| || ossl_time_compare(get_time(ch), ch->rxku_update_end_deadline) < 0) |
| return; |
| |
| ch->rxku_update_end_deadline = ossl_time_infinite(); |
| ch->rxku_in_progress = 0; |
| |
| if (!ossl_qrx_key_update_timeout(ch->qrx, /*normal=*/1)) |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_INTERNAL_ERROR, 0, |
| "RXKU cooldown internal error"); |
| } |
| |
| QUIC_NEEDS_LOCK |
| static void ch_on_txp_ack_tx(const OSSL_QUIC_FRAME_ACK *ack, uint32_t pn_space, |
| void *arg) |
| { |
| QUIC_CHANNEL *ch = arg; |
| |
| if (pn_space != QUIC_PN_SPACE_APP || !ch->rxku_pending_confirm |
| || !ossl_quic_frame_ack_contains_pn(ack, ch->rxku_trigger_pn)) |
| return; |
| |
| /* |
| * Defer clearing rxku_pending_confirm until TXP generate call returns |
| * successfully. |
| */ |
| ch->rxku_pending_confirm_done = 1; |
| } |
| |
| /* |
| * QUIC Channel: Handshake Layer Event Handling |
| * ============================================ |
| */ |
| static int ch_on_crypto_send(const unsigned char *buf, size_t buf_len, |
| size_t *consumed, void *arg) |
| { |
| int ret; |
| QUIC_CHANNEL *ch = arg; |
| uint32_t enc_level = ch->tx_enc_level; |
| uint32_t pn_space = ossl_quic_enc_level_to_pn_space(enc_level); |
| QUIC_SSTREAM *sstream = ch->crypto_send[pn_space]; |
| |
| if (!ossl_assert(sstream != NULL)) |
| return 0; |
| |
| ret = ossl_quic_sstream_append(sstream, buf, buf_len, consumed); |
| return ret; |
| } |
| |
| static int crypto_ensure_empty(QUIC_RSTREAM *rstream) |
| { |
| size_t avail = 0; |
| int is_fin = 0; |
| |
| if (rstream == NULL) |
| return 1; |
| |
| if (!ossl_quic_rstream_available(rstream, &avail, &is_fin)) |
| return 0; |
| |
| return avail == 0; |
| } |
| |
| static int ch_on_crypto_recv_record(const unsigned char **buf, |
| size_t *bytes_read, void *arg) |
| { |
| QUIC_CHANNEL *ch = arg; |
| QUIC_RSTREAM *rstream; |
| int is_fin = 0; /* crypto stream is never finished, so we don't use this */ |
| uint32_t i; |
| |
| /* |
| * After we move to a later EL we must not allow our peer to send any new |
| * bytes in the crypto stream on a previous EL. Retransmissions of old bytes |
| * are allowed. |
| * |
| * In practice we will only move to a new EL when we have consumed all bytes |
| * which should be sent on the crypto stream at a previous EL. For example, |
| * the Handshake EL should not be provisioned until we have completely |
| * consumed a TLS 1.3 ServerHello. Thus when we provision an EL the output |
| * of ossl_quic_rstream_available() should be 0 for all lower ELs. Thus if a |
| * given EL is available we simply ensure we have not received any further |
| * bytes at a lower EL. |
| */ |
| for (i = QUIC_ENC_LEVEL_INITIAL; i < ch->rx_enc_level; ++i) |
| if (i != QUIC_ENC_LEVEL_0RTT && |
| !crypto_ensure_empty(ch->crypto_recv[ossl_quic_enc_level_to_pn_space(i)])) { |
| /* Protocol violation (RFC 9001 s. 4.1.3) */ |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_PROTOCOL_VIOLATION, |
| OSSL_QUIC_FRAME_TYPE_CRYPTO, |
| "crypto stream data in wrong EL"); |
| return 0; |
| } |
| |
| rstream = ch->crypto_recv[ossl_quic_enc_level_to_pn_space(ch->rx_enc_level)]; |
| if (rstream == NULL) |
| return 0; |
| |
| return ossl_quic_rstream_get_record(rstream, buf, bytes_read, |
| &is_fin); |
| } |
| |
| static int ch_on_crypto_release_record(size_t bytes_read, void *arg) |
| { |
| QUIC_CHANNEL *ch = arg; |
| QUIC_RSTREAM *rstream; |
| OSSL_RTT_INFO rtt_info; |
| uint32_t rx_pn_space = ossl_quic_enc_level_to_pn_space(ch->rx_enc_level); |
| |
| rstream = ch->crypto_recv[rx_pn_space]; |
| if (rstream == NULL) |
| return 0; |
| |
| ossl_statm_get_rtt_info(ossl_quic_channel_get_statm(ch), &rtt_info); |
| if (!ossl_quic_rxfc_on_retire(&ch->crypto_rxfc[rx_pn_space], bytes_read, |
| rtt_info.smoothed_rtt)) |
| return 0; |
| |
| return ossl_quic_rstream_release_record(rstream, bytes_read); |
| } |
| |
| static int ch_on_handshake_yield_secret(uint32_t prot_level, int direction, |
| uint32_t suite_id, EVP_MD *md, |
| const unsigned char *secret, |
| size_t secret_len, |
| void *arg) |
| { |
| QUIC_CHANNEL *ch = arg; |
| uint32_t i; |
| uint32_t enc_level; |
| |
| /* Convert TLS protection level to QUIC encryption level */ |
| switch (prot_level) { |
| case OSSL_RECORD_PROTECTION_LEVEL_EARLY: |
| enc_level = QUIC_ENC_LEVEL_0RTT; |
| break; |
| |
| case OSSL_RECORD_PROTECTION_LEVEL_HANDSHAKE: |
| enc_level = QUIC_ENC_LEVEL_HANDSHAKE; |
| break; |
| |
| case OSSL_RECORD_PROTECTION_LEVEL_APPLICATION: |
| enc_level = QUIC_ENC_LEVEL_1RTT; |
| break; |
| |
| default: |
| return 0; |
| } |
| |
| if (enc_level < QUIC_ENC_LEVEL_HANDSHAKE || enc_level >= QUIC_ENC_LEVEL_NUM) |
| /* Invalid EL. */ |
| return 0; |
| |
| |
| if (direction) { |
| /* TX */ |
| if (enc_level <= ch->tx_enc_level) |
| /* |
| * Does not make sense for us to try and provision an EL we have already |
| * attained. |
| */ |
| return 0; |
| |
| if (!ossl_qtx_provide_secret(ch->qtx, enc_level, |
| suite_id, md, |
| secret, secret_len)) |
| return 0; |
| |
| ch->tx_enc_level = enc_level; |
| } else { |
| /* RX */ |
| if (enc_level <= ch->rx_enc_level) |
| /* |
| * Does not make sense for us to try and provision an EL we have already |
| * attained. |
| */ |
| return 0; |
| |
| /* |
| * Ensure all crypto streams for previous ELs are now empty of available |
| * data. |
| */ |
| for (i = QUIC_ENC_LEVEL_INITIAL; i < enc_level; ++i) |
| if (!crypto_ensure_empty(ch->crypto_recv[ossl_quic_enc_level_to_pn_space(i)])) { |
| /* Protocol violation (RFC 9001 s. 4.1.3) */ |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_PROTOCOL_VIOLATION, |
| OSSL_QUIC_FRAME_TYPE_CRYPTO, |
| "crypto stream data in wrong EL"); |
| return 0; |
| } |
| |
| if (!ossl_qrx_provide_secret(ch->qrx, enc_level, |
| suite_id, md, |
| secret, secret_len)) |
| return 0; |
| |
| ch->have_new_rx_secret = 1; |
| ch->rx_enc_level = enc_level; |
| } |
| |
| return 1; |
| } |
| |
| static int ch_on_handshake_complete(void *arg) |
| { |
| QUIC_CHANNEL *ch = arg; |
| |
| if (!ossl_assert(!ch->handshake_complete)) |
| return 0; /* this should not happen twice */ |
| |
| if (!ossl_assert(ch->tx_enc_level == QUIC_ENC_LEVEL_1RTT)) |
| return 0; |
| |
| /* |
| * When handshake is complete, we no longer need to abide by the |
| * 3x amplification limit, though we should be validated as soon |
| * as we see a handshake key encrypted packet (see ossl_quic_handle_packet) |
| */ |
| ossl_quic_tx_packetiser_set_validated(ch->txp); |
| |
| if (!ch->got_remote_transport_params) { |
| /* |
| * Was not a valid QUIC handshake if we did not get valid transport |
| * params. |
| */ |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_CRYPTO_MISSING_EXT, |
| OSSL_QUIC_FRAME_TYPE_CRYPTO, |
| "no transport parameters received"); |
| return 0; |
| } |
| |
| /* Don't need transport parameters anymore. */ |
| OPENSSL_free(ch->local_transport_params); |
| ch->local_transport_params = NULL; |
| |
| /* Tell the QRX it can now process 1-RTT packets. */ |
| ossl_qrx_allow_1rtt_processing(ch->qrx); |
| |
| /* Tell TXP the handshake is complete. */ |
| ossl_quic_tx_packetiser_notify_handshake_complete(ch->txp); |
| |
| ch->handshake_complete = 1; |
| |
| if (ch->pending_new_token != NULL) { |
| /* |
| * Note this is a best effort operation here |
| * If scheduling a new token fails, the worst outcome is that |
| * a client, not having received it, will just have to go through |
| * an extra roundtrip on a subsequent connection via the retry frame |
| * path, at which point we get another opportunity to schedule another |
| * new token. As a result, we don't need to handle any errors here |
| */ |
| ossl_quic_channel_schedule_new_token(ch, |
| ch->pending_new_token, |
| ch->pending_new_token_len); |
| OPENSSL_free(ch->pending_new_token); |
| ch->pending_new_token = NULL; |
| ch->pending_new_token_len = 0; |
| } |
| |
| if (ch->is_server) { |
| /* |
| * On the server, the handshake is confirmed as soon as it is complete. |
| */ |
| ossl_quic_channel_on_handshake_confirmed(ch); |
| |
| ossl_quic_tx_packetiser_schedule_handshake_done(ch->txp); |
| } |
| |
| ch_record_state_transition(ch, ch->state); |
| return 1; |
| } |
| |
| static int ch_on_handshake_alert(void *arg, unsigned char alert_code) |
| { |
| QUIC_CHANNEL *ch = arg; |
| |
| /* |
| * RFC 9001 s. 4.4: More specifically, servers MUST NOT send post-handshake |
| * TLS CertificateRequest messages, and clients MUST treat receipt of such |
| * messages as a connection error of type PROTOCOL_VIOLATION. |
| */ |
| if (alert_code == SSL_AD_UNEXPECTED_MESSAGE |
| && ch->handshake_complete |
| && ossl_quic_tls_is_cert_request(ch->qtls)) |
| ossl_quic_channel_raise_protocol_error(ch, |
| OSSL_QUIC_ERR_PROTOCOL_VIOLATION, |
| 0, |
| "Post-handshake TLS " |
| "CertificateRequest received"); |
| /* |
| * RFC 9001 s. 4.6.1: Servers MUST NOT send the early_data extension with a |
| * max_early_data_size field set to any value other than 0xffffffff. A |
| * client MUST treat receipt of a NewSessionTicket that contains an |
| * early_data extension with any other value as a connection error of type |
| * PROTOCOL_VIOLATION. |
| */ |
| else if (alert_code == SSL_AD_ILLEGAL_PARAMETER |
| && ch->handshake_complete |
| && ossl_quic_tls_has_bad_max_early_data(ch->qtls)) |
| ossl_quic_channel_raise_protocol_error(ch, |
| OSSL_QUIC_ERR_PROTOCOL_VIOLATION, |
| 0, |
| "Bad max_early_data received"); |
| else |
| ossl_quic_channel_raise_protocol_error(ch, |
| OSSL_QUIC_ERR_CRYPTO_ERR_BEGIN |
| + alert_code, |
| 0, "handshake alert"); |
| |
| return 1; |
| } |
| |
| /* |
| * QUIC Channel: Transport Parameter Handling |
| * ========================================== |
| */ |
| |
| /* |
| * Called by handshake layer when we receive QUIC Transport Parameters from the |
| * peer. Note that these are not authenticated until the handshake is marked |
| * as complete. |
| */ |
| #define TP_REASON_SERVER_ONLY(x) \ |
| x " may not be sent by a client" |
| #define TP_REASON_DUP(x) \ |
| x " appears multiple times" |
| #define TP_REASON_MALFORMED(x) \ |
| x " is malformed" |
| #define TP_REASON_EXPECTED_VALUE(x) \ |
| x " does not match expected value" |
| #define TP_REASON_NOT_RETRY(x) \ |
| x " sent when not performing a retry" |
| #define TP_REASON_REQUIRED(x) \ |
| x " was not sent but is required" |
| #define TP_REASON_INTERNAL_ERROR(x) \ |
| x " encountered internal error" |
| |
| static void txfc_bump_cwm_bidi(QUIC_STREAM *s, void *arg) |
| { |
| if (!ossl_quic_stream_is_bidi(s) |
| || ossl_quic_stream_is_server_init(s)) |
| return; |
| |
| ossl_quic_txfc_bump_cwm(&s->txfc, *(uint64_t *)arg); |
| } |
| |
| static void txfc_bump_cwm_uni(QUIC_STREAM *s, void *arg) |
| { |
| if (ossl_quic_stream_is_bidi(s) |
| || ossl_quic_stream_is_server_init(s)) |
| return; |
| |
| ossl_quic_txfc_bump_cwm(&s->txfc, *(uint64_t *)arg); |
| } |
| |
| static void do_update(QUIC_STREAM *s, void *arg) |
| { |
| QUIC_CHANNEL *ch = arg; |
| |
| ossl_quic_stream_map_update_state(&ch->qsm, s); |
| } |
| |
| static uint64_t min_u64_ignore_0(uint64_t a, uint64_t b) |
| { |
| if (a == 0) |
| return b; |
| if (b == 0) |
| return a; |
| |
| return a < b ? a : b; |
| } |
| |
| static int ch_on_transport_params(const unsigned char *params, |
| size_t params_len, |
| void *arg) |
| { |
| QUIC_CHANNEL *ch = arg; |
| PACKET pkt; |
| uint64_t id, v; |
| size_t len; |
| const unsigned char *body; |
| int got_orig_dcid = 0; |
| int got_initial_scid = 0; |
| int got_retry_scid = 0; |
| int got_initial_max_data = 0; |
| int got_initial_max_stream_data_bidi_local = 0; |
| int got_initial_max_stream_data_bidi_remote = 0; |
| int got_initial_max_stream_data_uni = 0; |
| int got_initial_max_streams_bidi = 0; |
| int got_initial_max_streams_uni = 0; |
| int got_stateless_reset_token = 0; |
| int got_preferred_addr = 0; |
| int got_ack_delay_exp = 0; |
| int got_max_ack_delay = 0; |
| int got_max_udp_payload_size = 0; |
| int got_max_idle_timeout = 0; |
| int got_active_conn_id_limit = 0; |
| int got_disable_active_migration = 0; |
| QUIC_CONN_ID cid; |
| const char *reason = "bad transport parameter"; |
| ossl_unused uint64_t rx_max_idle_timeout = 0; |
| ossl_unused const void *stateless_reset_token_p = NULL; |
| QUIC_PREFERRED_ADDR pfa; |
| |
| if (ch->got_remote_transport_params) { |
| reason = "multiple transport parameter extensions"; |
| goto malformed; |
| } |
| |
| if (!PACKET_buf_init(&pkt, params, params_len)) { |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_INTERNAL_ERROR, 0, |
| "internal error (packet buf init)"); |
| return 0; |
| } |
| |
| while (PACKET_remaining(&pkt) > 0) { |
| if (!ossl_quic_wire_peek_transport_param(&pkt, &id)) |
| goto malformed; |
| |
| switch (id) { |
| case QUIC_TPARAM_ORIG_DCID: |
| if (got_orig_dcid) { |
| reason = TP_REASON_DUP("ORIG_DCID"); |
| goto malformed; |
| } |
| |
| if (ch->is_server) { |
| reason = TP_REASON_SERVER_ONLY("ORIG_DCID"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_cid(&pkt, NULL, &cid)) { |
| reason = TP_REASON_MALFORMED("ORIG_DCID"); |
| goto malformed; |
| } |
| |
| #ifndef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION |
| /* Must match our initial DCID. */ |
| if (!ossl_quic_conn_id_eq(&ch->init_dcid, &cid)) { |
| reason = TP_REASON_EXPECTED_VALUE("ORIG_DCID"); |
| goto malformed; |
| } |
| #endif |
| |
| got_orig_dcid = 1; |
| break; |
| |
| case QUIC_TPARAM_RETRY_SCID: |
| if (ch->is_server) { |
| reason = TP_REASON_SERVER_ONLY("RETRY_SCID"); |
| goto malformed; |
| } |
| |
| if (got_retry_scid) { |
| reason = TP_REASON_DUP("RETRY_SCID"); |
| goto malformed; |
| } |
| |
| if (!ch->doing_retry) { |
| reason = TP_REASON_NOT_RETRY("RETRY_SCID"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_cid(&pkt, NULL, &cid)) { |
| reason = TP_REASON_MALFORMED("RETRY_SCID"); |
| goto malformed; |
| } |
| |
| /* Must match Retry packet SCID. */ |
| if (!ossl_quic_conn_id_eq(&ch->retry_scid, &cid)) { |
| reason = TP_REASON_EXPECTED_VALUE("RETRY_SCID"); |
| goto malformed; |
| } |
| |
| got_retry_scid = 1; |
| break; |
| |
| case QUIC_TPARAM_INITIAL_SCID: |
| if (got_initial_scid) { |
| /* must not appear more than once */ |
| reason = TP_REASON_DUP("INITIAL_SCID"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_cid(&pkt, NULL, &cid)) { |
| reason = TP_REASON_MALFORMED("INITIAL_SCID"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_conn_id_eq(&ch->init_scid, &cid)) { |
| reason = TP_REASON_EXPECTED_VALUE("INITIAL_SCID"); |
| goto malformed; |
| } |
| |
| got_initial_scid = 1; |
| break; |
| |
| case QUIC_TPARAM_INITIAL_MAX_DATA: |
| if (got_initial_max_data) { |
| /* must not appear more than once */ |
| reason = TP_REASON_DUP("INITIAL_MAX_DATA"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_int(&pkt, &id, &v)) { |
| reason = TP_REASON_MALFORMED("INITIAL_MAX_DATA"); |
| goto malformed; |
| } |
| |
| ossl_quic_txfc_bump_cwm(&ch->conn_txfc, v); |
| got_initial_max_data = 1; |
| break; |
| |
| case QUIC_TPARAM_INITIAL_MAX_STREAM_DATA_BIDI_LOCAL: |
| if (got_initial_max_stream_data_bidi_local) { |
| /* must not appear more than once */ |
| reason = TP_REASON_DUP("INITIAL_MAX_STREAM_DATA_BIDI_LOCAL"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_int(&pkt, &id, &v)) { |
| reason = TP_REASON_MALFORMED("INITIAL_MAX_STREAM_DATA_BIDI_LOCAL"); |
| goto malformed; |
| } |
| |
| /* |
| * This is correct; the BIDI_LOCAL TP governs streams created by |
| * the endpoint which sends the TP, i.e., our peer. |
| */ |
| ch->rx_init_max_stream_data_bidi_remote = v; |
| got_initial_max_stream_data_bidi_local = 1; |
| break; |
| |
| case QUIC_TPARAM_INITIAL_MAX_STREAM_DATA_BIDI_REMOTE: |
| if (got_initial_max_stream_data_bidi_remote) { |
| /* must not appear more than once */ |
| reason = TP_REASON_DUP("INITIAL_MAX_STREAM_DATA_BIDI_REMOTE"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_int(&pkt, &id, &v)) { |
| reason = TP_REASON_MALFORMED("INITIAL_MAX_STREAM_DATA_BIDI_REMOTE"); |
| goto malformed; |
| } |
| |
| /* |
| * This is correct; the BIDI_REMOTE TP governs streams created |
| * by the endpoint which receives the TP, i.e., us. |
| */ |
| ch->rx_init_max_stream_data_bidi_local = v; |
| |
| /* Apply to all existing streams. */ |
| ossl_quic_stream_map_visit(&ch->qsm, txfc_bump_cwm_bidi, &v); |
| got_initial_max_stream_data_bidi_remote = 1; |
| break; |
| |
| case QUIC_TPARAM_INITIAL_MAX_STREAM_DATA_UNI: |
| if (got_initial_max_stream_data_uni) { |
| /* must not appear more than once */ |
| reason = TP_REASON_DUP("INITIAL_MAX_STREAM_DATA_UNI"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_int(&pkt, &id, &v)) { |
| reason = TP_REASON_MALFORMED("INITIAL_MAX_STREAM_DATA_UNI"); |
| goto malformed; |
| } |
| |
| ch->rx_init_max_stream_data_uni = v; |
| |
| /* Apply to all existing streams. */ |
| ossl_quic_stream_map_visit(&ch->qsm, txfc_bump_cwm_uni, &v); |
| got_initial_max_stream_data_uni = 1; |
| break; |
| |
| case QUIC_TPARAM_ACK_DELAY_EXP: |
| if (got_ack_delay_exp) { |
| /* must not appear more than once */ |
| reason = TP_REASON_DUP("ACK_DELAY_EXP"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_int(&pkt, &id, &v) |
| || v > QUIC_MAX_ACK_DELAY_EXP) { |
| reason = TP_REASON_MALFORMED("ACK_DELAY_EXP"); |
| goto malformed; |
| } |
| |
| ch->rx_ack_delay_exp = (unsigned char)v; |
| got_ack_delay_exp = 1; |
| break; |
| |
| case QUIC_TPARAM_MAX_ACK_DELAY: |
| if (got_max_ack_delay) { |
| /* must not appear more than once */ |
| reason = TP_REASON_DUP("MAX_ACK_DELAY"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_int(&pkt, &id, &v) |
| || v >= (((uint64_t)1) << 14)) { |
| reason = TP_REASON_MALFORMED("MAX_ACK_DELAY"); |
| goto malformed; |
| } |
| |
| ch->rx_max_ack_delay = v; |
| ossl_ackm_set_rx_max_ack_delay(ch->ackm, |
| ossl_ms2time(ch->rx_max_ack_delay)); |
| |
| got_max_ack_delay = 1; |
| break; |
| |
| case QUIC_TPARAM_INITIAL_MAX_STREAMS_BIDI: |
| if (got_initial_max_streams_bidi) { |
| /* must not appear more than once */ |
| reason = TP_REASON_DUP("INITIAL_MAX_STREAMS_BIDI"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_int(&pkt, &id, &v) |
| || v > (((uint64_t)1) << 60)) { |
| reason = TP_REASON_MALFORMED("INITIAL_MAX_STREAMS_BIDI"); |
| goto malformed; |
| } |
| |
| assert(ch->max_local_streams_bidi == 0); |
| ch->max_local_streams_bidi = v; |
| got_initial_max_streams_bidi = 1; |
| break; |
| |
| case QUIC_TPARAM_INITIAL_MAX_STREAMS_UNI: |
| if (got_initial_max_streams_uni) { |
| /* must not appear more than once */ |
| reason = TP_REASON_DUP("INITIAL_MAX_STREAMS_UNI"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_int(&pkt, &id, &v) |
| || v > (((uint64_t)1) << 60)) { |
| reason = TP_REASON_MALFORMED("INITIAL_MAX_STREAMS_UNI"); |
| goto malformed; |
| } |
| |
| assert(ch->max_local_streams_uni == 0); |
| ch->max_local_streams_uni = v; |
| got_initial_max_streams_uni = 1; |
| break; |
| |
| case QUIC_TPARAM_MAX_IDLE_TIMEOUT: |
| if (got_max_idle_timeout) { |
| /* must not appear more than once */ |
| reason = TP_REASON_DUP("MAX_IDLE_TIMEOUT"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_int(&pkt, &id, &v)) { |
| reason = TP_REASON_MALFORMED("MAX_IDLE_TIMEOUT"); |
| goto malformed; |
| } |
| |
| ch->max_idle_timeout_remote_req = v; |
| |
| ch->max_idle_timeout = min_u64_ignore_0(ch->max_idle_timeout_local_req, |
| ch->max_idle_timeout_remote_req); |
| |
| |
| ch_update_idle(ch); |
| got_max_idle_timeout = 1; |
| rx_max_idle_timeout = v; |
| break; |
| |
| case QUIC_TPARAM_MAX_UDP_PAYLOAD_SIZE: |
| if (got_max_udp_payload_size) { |
| /* must not appear more than once */ |
| reason = TP_REASON_DUP("MAX_UDP_PAYLOAD_SIZE"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_int(&pkt, &id, &v) |
| || v < QUIC_MIN_INITIAL_DGRAM_LEN) { |
| reason = TP_REASON_MALFORMED("MAX_UDP_PAYLOAD_SIZE"); |
| goto malformed; |
| } |
| |
| ch->rx_max_udp_payload_size = v; |
| got_max_udp_payload_size = 1; |
| break; |
| |
| case QUIC_TPARAM_ACTIVE_CONN_ID_LIMIT: |
| if (got_active_conn_id_limit) { |
| /* must not appear more than once */ |
| reason = TP_REASON_DUP("ACTIVE_CONN_ID_LIMIT"); |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_int(&pkt, &id, &v) |
| || v < QUIC_MIN_ACTIVE_CONN_ID_LIMIT) { |
| reason = TP_REASON_MALFORMED("ACTIVE_CONN_ID_LIMIT"); |
| goto malformed; |
| } |
| |
| ch->rx_active_conn_id_limit = v; |
| got_active_conn_id_limit = 1; |
| break; |
| |
| case QUIC_TPARAM_STATELESS_RESET_TOKEN: |
| if (got_stateless_reset_token) { |
| reason = TP_REASON_DUP("STATELESS_RESET_TOKEN"); |
| goto malformed; |
| } |
| |
| /* |
| * RFC 9000 s. 18.2: This transport parameter MUST NOT be sent |
| * by a client but MAY be sent by a server. |
| */ |
| if (ch->is_server) { |
| reason = TP_REASON_SERVER_ONLY("STATELESS_RESET_TOKEN"); |
| goto malformed; |
| } |
| |
| body = ossl_quic_wire_decode_transport_param_bytes(&pkt, &id, &len); |
| if (body == NULL || len != QUIC_STATELESS_RESET_TOKEN_LEN) { |
| reason = TP_REASON_MALFORMED("STATELESS_RESET_TOKEN"); |
| goto malformed; |
| } |
| if (!ossl_quic_srtm_add(ch->srtm, ch, ch->cur_remote_seq_num, |
| (const QUIC_STATELESS_RESET_TOKEN *)body)) { |
| reason = TP_REASON_INTERNAL_ERROR("STATELESS_RESET_TOKEN"); |
| goto malformed; |
| } |
| |
| stateless_reset_token_p = body; |
| got_stateless_reset_token = 1; |
| break; |
| |
| case QUIC_TPARAM_PREFERRED_ADDR: |
| /* TODO(QUIC FUTURE): Handle preferred address. */ |
| if (got_preferred_addr) { |
| reason = TP_REASON_DUP("PREFERRED_ADDR"); |
| goto malformed; |
| } |
| |
| /* |
| * RFC 9000 s. 18.2: "A server that chooses a zero-length |
| * connection ID MUST NOT provide a preferred address. |
| * Similarly, a server MUST NOT include a zero-length connection |
| * ID in this transport parameter. A client MUST treat a |
| * violation of these requirements as a connection error of type |
| * TRANSPORT_PARAMETER_ERROR." |
| */ |
| if (ch->is_server) { |
| reason = TP_REASON_SERVER_ONLY("PREFERRED_ADDR"); |
| goto malformed; |
| } |
| |
| if (ch->cur_remote_dcid.id_len == 0) { |
| reason = "PREFERRED_ADDR provided for zero-length CID"; |
| goto malformed; |
| } |
| |
| if (!ossl_quic_wire_decode_transport_param_preferred_addr(&pkt, &pfa)) { |
| reason = TP_REASON_MALFORMED("PREFERRED_ADDR"); |
| goto malformed; |
| } |
| |
| if (pfa.cid.id_len == 0) { |
| reason = "zero-length CID in PREFERRED_ADDR"; |
| goto malformed; |
| } |
| |
| got_preferred_addr = 1; |
| break; |
| |
| case QUIC_TPARAM_DISABLE_ACTIVE_MIGRATION: |
| /* We do not currently handle migration, so nothing to do. */ |
| if (got_disable_active_migration) { |
| /* must not appear more than once */ |
| reason = TP_REASON_DUP("DISABLE_ACTIVE_MIGRATION"); |
| goto malformed; |
| } |
| |
| body = ossl_quic_wire_decode_transport_param_bytes(&pkt, &id, &len); |
| if (body == NULL || len > 0) { |
| reason = TP_REASON_MALFORMED("DISABLE_ACTIVE_MIGRATION"); |
| goto malformed; |
| } |
| |
| got_disable_active_migration = 1; |
| break; |
| |
| default: |
| /* |
| * Skip over and ignore. |
| * |
| * RFC 9000 s. 7.4: We SHOULD treat duplicated transport parameters |
| * as a connection error, but we are not required to. Currently, |
| * handle this programmatically by checking for duplicates in the |
| * parameters that we recognise, as above, but don't bother |
| * maintaining a list of duplicates for anything we don't recognise. |
| */ |
| body = ossl_quic_wire_decode_transport_param_bytes(&pkt, &id, |
| &len); |
| if (body == NULL) |
| goto malformed; |
| |
| break; |
| } |
| } |
| |
| if (!got_initial_scid) { |
| reason = TP_REASON_REQUIRED("INITIAL_SCID"); |
| goto malformed; |
| } |
| |
| if (!ch->is_server) { |
| if (!got_orig_dcid) { |
| reason = TP_REASON_REQUIRED("ORIG_DCID"); |
| goto malformed; |
| } |
| |
| if (ch->doing_retry && !got_retry_scid) { |
| reason = TP_REASON_REQUIRED("RETRY_SCID"); |
| goto malformed; |
| } |
| } |
| |
| ch->got_remote_transport_params = 1; |
| |
| #ifndef OPENSSL_NO_QLOG |
| QLOG_EVENT_BEGIN(ch_get_qlog(ch), transport, parameters_set) |
| QLOG_STR("owner", "remote"); |
| |
| if (got_orig_dcid) |
| QLOG_CID("original_destination_connection_id", |
| &ch->init_dcid); |
| if (got_initial_scid) |
| QLOG_CID("original_source_connection_id", |
| &ch->init_dcid); |
| if (got_retry_scid) |
| QLOG_CID("retry_source_connection_id", |
| &ch->retry_scid); |
| if (got_initial_max_data) |
| QLOG_U64("initial_max_data", |
| ossl_quic_txfc_get_cwm(&ch->conn_txfc)); |
| if (got_initial_max_stream_data_bidi_local) |
| QLOG_U64("initial_max_stream_data_bidi_local", |
| ch->rx_init_max_stream_data_bidi_local); |
| if (got_initial_max_stream_data_bidi_remote) |
| QLOG_U64("initial_max_stream_data_bidi_remote", |
| ch->rx_init_max_stream_data_bidi_remote); |
| if (got_initial_max_stream_data_uni) |
| QLOG_U64("initial_max_stream_data_uni", |
| ch->rx_init_max_stream_data_uni); |
| if (got_initial_max_streams_bidi) |
| QLOG_U64("initial_max_streams_bidi", |
| ch->max_local_streams_bidi); |
| if (got_initial_max_streams_uni) |
| QLOG_U64("initial_max_streams_uni", |
| ch->max_local_streams_uni); |
| if (got_ack_delay_exp) |
| QLOG_U64("ack_delay_exponent", ch->rx_ack_delay_exp); |
| if (got_max_ack_delay) |
| QLOG_U64("max_ack_delay", ch->rx_max_ack_delay); |
| if (got_max_udp_payload_size) |
| QLOG_U64("max_udp_payload_size", ch->rx_max_udp_payload_size); |
| if (got_max_idle_timeout) |
| QLOG_U64("max_idle_timeout", rx_max_idle_timeout); |
| if (got_active_conn_id_limit) |
| QLOG_U64("active_connection_id_limit", ch->rx_active_conn_id_limit); |
| if (got_stateless_reset_token) |
| QLOG_BIN("stateless_reset_token", stateless_reset_token_p, |
| QUIC_STATELESS_RESET_TOKEN_LEN); |
| if (got_preferred_addr) { |
| QLOG_BEGIN("preferred_addr") |
| QLOG_U64("port_v4", pfa.ipv4_port); |
| QLOG_U64("port_v6", pfa.ipv6_port); |
| QLOG_BIN("ip_v4", pfa.ipv4, sizeof(pfa.ipv4)); |
| QLOG_BIN("ip_v6", pfa.ipv6, sizeof(pfa.ipv6)); |
| QLOG_BIN("stateless_reset_token", pfa.stateless_reset.token, |
| sizeof(pfa.stateless_reset.token)); |
| QLOG_CID("connection_id", &pfa.cid); |
| QLOG_END() |
| } |
| QLOG_BOOL("disable_active_migration", got_disable_active_migration); |
| QLOG_EVENT_END() |
| #endif |
| |
| if (got_initial_max_data || got_initial_max_stream_data_bidi_remote |
| || got_initial_max_streams_bidi || got_initial_max_streams_uni) |
| /* |
| * If FC credit was bumped, we may now be able to send. Update all |
| * streams. |
| */ |
| ossl_quic_stream_map_visit(&ch->qsm, do_update, ch); |
| |
| /* If we are a server, we now generate our own transport parameters. */ |
| if (ch->is_server && !ch_generate_transport_params(ch)) { |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_INTERNAL_ERROR, 0, |
| "internal error"); |
| return 0; |
| } |
| |
| return 1; |
| |
| malformed: |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_TRANSPORT_PARAMETER_ERROR, |
| 0, reason); |
| return 0; |
| } |
| |
| /* |
| * Called when we want to generate transport parameters. This is called |
| * immediately at instantiation time for a client and after we receive the |
| * client's transport parameters for a server. |
| */ |
| static int ch_generate_transport_params(QUIC_CHANNEL *ch) |
| { |
| int ok = 0; |
| BUF_MEM *buf_mem = NULL; |
| WPACKET wpkt; |
| int wpkt_valid = 0; |
| size_t buf_len = 0; |
| QUIC_CONN_ID *id_to_use = NULL; |
| |
| /* |
| * We need to select which connection id to encode in the |
| * QUIC_TPARAM_ORIG_DCID transport parameter |
| * If we have an odcid, then this connection was established |
| * in response to a retry request, and we need to use the connection |
| * id sent in the first initial packet. |
| * If we don't have an odcid, then this connection was established |
| * without a retry and the init_dcid is the connection we should use |
| */ |
| if (ch->odcid.id_len == 0) |
| id_to_use = &ch->init_dcid; |
| else |
| id_to_use = &ch->odcid; |
| |
| if (ch->local_transport_params != NULL || ch->got_local_transport_params) |
| goto err; |
| |
| if ((buf_mem = BUF_MEM_new()) == NULL) |
| goto err; |
| |
| if (!WPACKET_init(&wpkt, buf_mem)) |
| goto err; |
| |
| wpkt_valid = 1; |
| |
| if (ossl_quic_wire_encode_transport_param_bytes(&wpkt, QUIC_TPARAM_DISABLE_ACTIVE_MIGRATION, |
| NULL, 0) == NULL) |
| goto err; |
| |
| if (ch->is_server) { |
| if (!ossl_quic_wire_encode_transport_param_cid(&wpkt, QUIC_TPARAM_ORIG_DCID, |
| id_to_use)) |
| goto err; |
| |
| if (!ossl_quic_wire_encode_transport_param_cid(&wpkt, QUIC_TPARAM_INITIAL_SCID, |
| &ch->cur_local_cid)) |
| goto err; |
| if (ch->odcid.id_len != 0) |
| if (!ossl_quic_wire_encode_transport_param_cid(&wpkt, |
| QUIC_TPARAM_RETRY_SCID, |
| &ch->init_dcid)) |
| goto err; |
| } else { |
| if (!ossl_quic_wire_encode_transport_param_cid(&wpkt, QUIC_TPARAM_INITIAL_SCID, |
| &ch->init_scid)) |
| goto err; |
| } |
| |
| if (!ossl_quic_wire_encode_transport_param_int(&wpkt, QUIC_TPARAM_MAX_IDLE_TIMEOUT, |
| ch->max_idle_timeout_local_req)) |
| goto err; |
| |
| if (!ossl_quic_wire_encode_transport_param_int(&wpkt, QUIC_TPARAM_MAX_UDP_PAYLOAD_SIZE, |
| QUIC_MIN_INITIAL_DGRAM_LEN)) |
| goto err; |
| |
| if (!ossl_quic_wire_encode_transport_param_int(&wpkt, QUIC_TPARAM_ACTIVE_CONN_ID_LIMIT, |
| QUIC_MIN_ACTIVE_CONN_ID_LIMIT)) |
| goto err; |
| |
| if (ch->tx_max_ack_delay != QUIC_DEFAULT_MAX_ACK_DELAY |
| && !ossl_quic_wire_encode_transport_param_int(&wpkt, QUIC_TPARAM_MAX_ACK_DELAY, |
| ch->tx_max_ack_delay)) |
| goto err; |
| |
| if (!ossl_quic_wire_encode_transport_param_int(&wpkt, QUIC_TPARAM_INITIAL_MAX_DATA, |
| ossl_quic_rxfc_get_cwm(&ch->conn_rxfc))) |
| goto err; |
| |
| /* Send the default CWM for a new RXFC. */ |
| if (!ossl_quic_wire_encode_transport_param_int(&wpkt, QUIC_TPARAM_INITIAL_MAX_STREAM_DATA_BIDI_LOCAL, |
| ch->tx_init_max_stream_data_bidi_local)) |
| goto err; |
| |
| if (!ossl_quic_wire_encode_transport_param_int(&wpkt, QUIC_TPARAM_INITIAL_MAX_STREAM_DATA_BIDI_REMOTE, |
| ch->tx_init_max_stream_data_bidi_remote)) |
| goto err; |
| |
| if (!ossl_quic_wire_encode_transport_param_int(&wpkt, QUIC_TPARAM_INITIAL_MAX_STREAM_DATA_UNI, |
| ch->tx_init_max_stream_data_uni)) |
| goto err; |
| |
| if (!ossl_quic_wire_encode_transport_param_int(&wpkt, QUIC_TPARAM_INITIAL_MAX_STREAMS_BIDI, |
| ossl_quic_rxfc_get_cwm(&ch->max_streams_bidi_rxfc))) |
| goto err; |
| |
| if (!ossl_quic_wire_encode_transport_param_int(&wpkt, QUIC_TPARAM_INITIAL_MAX_STREAMS_UNI, |
| ossl_quic_rxfc_get_cwm(&ch->max_streams_uni_rxfc))) |
| goto err; |
| |
| if (!WPACKET_finish(&wpkt)) |
| goto err; |
| |
| wpkt_valid = 0; |
| |
| if (!WPACKET_get_total_written(&wpkt, &buf_len)) |
| goto err; |
| |
| ch->local_transport_params = (unsigned char *)buf_mem->data; |
| buf_mem->data = NULL; |
| |
| if (!ossl_quic_tls_set_transport_params(ch->qtls, ch->local_transport_params, |
| buf_len)) |
| goto err; |
| |
| #ifndef OPENSSL_NO_QLOG |
| QLOG_EVENT_BEGIN(ch_get_qlog(ch), transport, parameters_set) |
| QLOG_STR("owner", "local"); |
| QLOG_BOOL("disable_active_migration", 1); |
| if (ch->is_server) { |
| QLOG_CID("original_destination_connection_id", &ch->init_dcid); |
| QLOG_CID("initial_source_connection_id", &ch->cur_local_cid); |
| } else { |
| QLOG_STR("initial_source_connection_id", ""); |
| } |
| QLOG_U64("max_idle_timeout", ch->max_idle_timeout); |
| QLOG_U64("max_udp_payload_size", QUIC_MIN_INITIAL_DGRAM_LEN); |
| QLOG_U64("active_connection_id_limit", QUIC_MIN_ACTIVE_CONN_ID_LIMIT); |
| QLOG_U64("max_ack_delay", ch->tx_max_ack_delay); |
| QLOG_U64("initial_max_data", ossl_quic_rxfc_get_cwm(&ch->conn_rxfc)); |
| QLOG_U64("initial_max_stream_data_bidi_local", |
| ch->tx_init_max_stream_data_bidi_local); |
| QLOG_U64("initial_max_stream_data_bidi_remote", |
| ch->tx_init_max_stream_data_bidi_remote); |
| QLOG_U64("initial_max_stream_data_uni", |
| ch->tx_init_max_stream_data_uni); |
| QLOG_U64("initial_max_streams_bidi", |
| ossl_quic_rxfc_get_cwm(&ch->max_streams_bidi_rxfc)); |
| QLOG_U64("initial_max_streams_uni", |
| ossl_quic_rxfc_get_cwm(&ch->max_streams_uni_rxfc)); |
| QLOG_EVENT_END() |
| #endif |
| |
| ch->got_local_transport_params = 1; |
| |
| ok = 1; |
| err: |
| if (wpkt_valid) |
| WPACKET_cleanup(&wpkt); |
| BUF_MEM_free(buf_mem); |
| return ok; |
| } |
| |
| /* |
| * QUIC Channel: Ticker-Mutator |
| * ============================ |
| */ |
| |
| /* |
| * The central ticker function called by the reactor. This does everything, or |
| * at least everything network I/O related. Best effort - not allowed to fail |
| * "loudly". |
| */ |
| void ossl_quic_channel_subtick(QUIC_CHANNEL *ch, QUIC_TICK_RESULT *res, |
| uint32_t flags) |
| { |
| OSSL_TIME now, deadline; |
| int channel_only = (flags & QUIC_REACTOR_TICK_FLAG_CHANNEL_ONLY) != 0; |
| int notify_other_threads = 0; |
| |
| /* |
| * When we tick the QUIC connection, we do everything we need to do |
| * periodically. Network I/O handling will already have been performed |
| * as necessary by the QUIC port. Thus, in order, we: |
| * |
| * - handle any packets the DEMUX has queued up for us; |
| * - handle any timer events which are due to fire (ACKM, etc.); |
| * - generate any packets which need to be sent; |
| * - determine the time at which we should next be ticked. |
| */ |
| |
| /* |
| * If the connection has not yet started, or we are in the TERMINATED state, |
| * there is nothing to do. |
| */ |
| if (ch->state == QUIC_CHANNEL_STATE_IDLE |
| || ossl_quic_channel_is_terminated(ch)) { |
| res->net_read_desired = 0; |
| res->net_write_desired = 0; |
| res->notify_other_threads = 0; |
| res->tick_deadline = ossl_time_infinite(); |
| return; |
| } |
| |
| /* |
| * If we are in the TERMINATING state, check if the terminating timer has |
| * expired. |
| */ |
| if (ossl_quic_channel_is_terminating(ch)) { |
| now = get_time(ch); |
| |
| if (ossl_time_compare(now, ch->terminate_deadline) >= 0) { |
| ch_on_terminating_timeout(ch); |
| res->net_read_desired = 0; |
| res->net_write_desired = 0; |
| res->notify_other_threads = 1; |
| res->tick_deadline = ossl_time_infinite(); |
| return; /* abort normal processing, nothing to do */ |
| } |
| } |
| |
| if (!ch->port->engine->inhibit_tick) { |
| /* Handle RXKU timeouts. */ |
| ch_rxku_tick(ch); |
| |
| do { |
| /* Process queued incoming packets. */ |
| ch->did_tls_tick = 0; |
| ch->have_new_rx_secret = 0; |
| ch_rx(ch, channel_only, ¬ify_other_threads); |
| |
| /* |
| * Allow the handshake layer to check for any new incoming data and |
| * generate new outgoing data. |
| */ |
| if (!ch->did_tls_tick) |
| ch_tick_tls(ch, channel_only, ¬ify_other_threads); |
| |
| /* |
| * If the handshake layer gave us a new secret, we need to do RX |
| * again because packets that were not previously processable and |
| * were deferred might now be processable. |
| * |
| * TODO(QUIC FUTURE): Consider handling this in the yield_secret callback. |
| */ |
| } while (ch->have_new_rx_secret); |
| } |
| |
| /* |
| * Handle any timer events which are due to fire; namely, the loss |
| * detection deadline and the idle timeout. |
| * |
| * ACKM ACK generation deadline is polled by TXP, so we don't need to |
| * handle it here. |
| */ |
| now = get_time(ch); |
| if (ossl_time_compare(now, ch->idle_deadline) >= 0) { |
| /* |
| * Idle timeout differs from normal protocol violation because we do |
| * not send a CONN_CLOSE frame; go straight to TERMINATED. |
| */ |
| if (!ch->port->engine->inhibit_tick) |
| ch_on_idle_timeout(ch); |
| |
| res->net_read_desired = 0; |
| res->net_write_desired = 0; |
| res->notify_other_threads = 1; |
| res->tick_deadline = ossl_time_infinite(); |
| return; |
| } |
| |
| if (!ch->port->engine->inhibit_tick) { |
| deadline = ossl_ackm_get_loss_detection_deadline(ch->ackm); |
| if (!ossl_time_is_zero(deadline) |
| && ossl_time_compare(now, deadline) >= 0) |
| ossl_ackm_on_timeout(ch->ackm); |
| |
| /* If a ping is due, inform TXP. */ |
| if (ossl_time_compare(now, ch->ping_deadline) >= 0) { |
| int pn_space = ossl_quic_enc_level_to_pn_space(ch->tx_enc_level); |
| |
| ossl_quic_tx_packetiser_schedule_ack_eliciting(ch->txp, pn_space); |
| |
| /* |
| * If we have no CC budget at this time we cannot process the above |
| * PING request immediately. In any case we have scheduled the |
| * request so bump the ping deadline. If we don't do this we will |
| * busy-loop endlessly as the above deadline comparison condition |
| * will still be met. |
| */ |
| ch_update_ping_deadline(ch); |
| } |
| |
| /* Queue any data to be sent for transmission. */ |
| ch_tx(ch, ¬ify_other_threads); |
| |
| /* Do stream GC. */ |
| ossl_quic_stream_map_gc(&ch->qsm); |
| } |
| |
| /* Determine the time at which we should next be ticked. */ |
| res->tick_deadline = ch_determine_next_tick_deadline(ch); |
| |
| /* |
| * Always process network input unless we are now terminated. Although we |
| * had not terminated at the beginning of this tick, network errors in |
| * ch_tx() may have caused us to transition to the Terminated state. |
| */ |
| res->net_read_desired = !ossl_quic_channel_is_terminated(ch); |
| |
| /* We want to write to the network if we have any data in our TX queue. */ |
| res->net_write_desired |
| = (!ossl_quic_channel_is_terminated(ch) |
| && ossl_qtx_get_queue_len_datagrams(ch->qtx) > 0); |
| |
| res->notify_other_threads = notify_other_threads; |
| } |
| |
| static int ch_tick_tls(QUIC_CHANNEL *ch, int channel_only, int *notify_other_threads) |
| { |
| uint64_t error_code; |
| const char *error_msg; |
| ERR_STATE *error_state = NULL; |
| |
| if (channel_only) |
| return 1; |
| |
| ch->did_tls_tick = 1; |
| ossl_quic_tls_tick(ch->qtls); |
| |
| if (ossl_quic_tls_get_error(ch->qtls, &error_code, &error_msg, |
| &error_state)) { |
| ossl_quic_channel_raise_protocol_error_state(ch, error_code, 0, |
| error_msg, error_state); |
| if (notify_other_threads != NULL) |
| *notify_other_threads = 1; |
| |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| /* Check incoming forged packet limit and terminate connection if needed. */ |
| static void ch_rx_check_forged_pkt_limit(QUIC_CHANNEL *ch) |
| { |
| uint32_t enc_level; |
| uint64_t limit = UINT64_MAX, l; |
| |
| for (enc_level = QUIC_ENC_LEVEL_INITIAL; |
| enc_level < QUIC_ENC_LEVEL_NUM; |
| ++enc_level) |
| { |
| /* |
| * Different ELs can have different AEADs which can in turn impose |
| * different limits, so use the lowest value of any currently valid EL. |
| */ |
| if ((ch->el_discarded & (1U << enc_level)) != 0) |
| continue; |
| |
| if (enc_level > ch->rx_enc_level) |
| break; |
| |
| l = ossl_qrx_get_max_forged_pkt_count(ch->qrx, enc_level); |
| if (l < limit) |
| limit = l; |
| } |
| |
| if (ossl_qrx_get_cur_forged_pkt_count(ch->qrx) < limit) |
| return; |
| |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_AEAD_LIMIT_REACHED, 0, |
| "forgery limit"); |
| } |
| |
| /* Process queued incoming packets and handle frames, if any. */ |
| static int ch_rx(QUIC_CHANNEL *ch, int channel_only, int *notify_other_threads) |
| { |
| int handled_any = 0; |
| const int closing = ossl_quic_channel_is_closing(ch); |
| |
| if (!ch->is_server && !ch->have_sent_any_pkt) |
| /* |
| * We have not sent anything yet, therefore there is no need to check |
| * for incoming data. |
| */ |
| return 1; |
| |
| for (;;) { |
| assert(ch->qrx_pkt == NULL); |
| |
| if (!ossl_qrx_read_pkt(ch->qrx, &ch->qrx_pkt)) |
| break; |
| |
| /* Track the amount of data received while in the closing state */ |
| if (closing) |
| ossl_quic_tx_packetiser_record_received_closing_bytes( |
| ch->txp, ch->qrx_pkt->hdr->len); |
| |
| if (!handled_any) { |
| ch_update_idle(ch); |
| ch_update_ping_deadline(ch); |
| } |
| |
| ch_rx_handle_packet(ch, channel_only); /* best effort */ |
| |
| /* |
| * Regardless of the outcome of frame handling, unref the packet. |
| * This will free the packet unless something added another |
| * reference to it during frame processing. |
| */ |
| ossl_qrx_pkt_release(ch->qrx_pkt); |
| ch->qrx_pkt = NULL; |
| |
| ch->have_sent_ack_eliciting_since_rx = 0; |
| handled_any = 1; |
| } |
| |
| ch_rx_check_forged_pkt_limit(ch); |
| |
| if (handled_any && notify_other_threads != NULL) |
| *notify_other_threads = 1; |
| |
| /* |
| * When in TERMINATING - CLOSING, generate a CONN_CLOSE frame whenever we |
| * process one or more incoming packets. |
| */ |
| if (handled_any && closing) |
| ch->conn_close_queued = 1; |
| |
| return 1; |
| } |
| |
| static int bio_addr_eq(const BIO_ADDR *a, const BIO_ADDR *b) |
| { |
| if (BIO_ADDR_family(a) != BIO_ADDR_family(b)) |
| return 0; |
| |
| switch (BIO_ADDR_family(a)) { |
| case AF_INET: |
| return !memcmp(&a->s_in.sin_addr, |
| &b->s_in.sin_addr, |
| sizeof(a->s_in.sin_addr)) |
| && a->s_in.sin_port == b->s_in.sin_port; |
| #if OPENSSL_USE_IPV6 |
| case AF_INET6: |
| return !memcmp(&a->s_in6.sin6_addr, |
| &b->s_in6.sin6_addr, |
| sizeof(a->s_in6.sin6_addr)) |
| && a->s_in6.sin6_port == b->s_in6.sin6_port; |
| #endif |
| default: |
| return 0; /* not supported */ |
| } |
| |
| return 1; |
| } |
| |
| /* Handles the packet currently in ch->qrx_pkt->hdr. */ |
| static void ch_rx_handle_packet(QUIC_CHANNEL *ch, int channel_only) |
| { |
| uint32_t enc_level; |
| int old_have_processed_any_pkt = ch->have_processed_any_pkt; |
| OSSL_QTX_IOVEC iovec; |
| PACKET vpkt; |
| unsigned long supported_ver; |
| |
| assert(ch->qrx_pkt != NULL); |
| |
| /* |
| * RFC 9000 s. 10.2.1 Closing Connection State: |
| * An endpoint that is closing is not required to process any |
| * received frame. |
| */ |
| if (!ossl_quic_channel_is_active(ch)) |
| return; |
| |
| if (ossl_quic_pkt_type_is_encrypted(ch->qrx_pkt->hdr->type)) { |
| if (!ch->have_received_enc_pkt) { |
| ch->cur_remote_dcid = ch->init_scid = ch->qrx_pkt->hdr->src_conn_id; |
| ch->have_received_enc_pkt = 1; |
| |
| /* |
| * We change to using the SCID in the first Initial packet as the |
| * DCID. |
| */ |
| ossl_quic_tx_packetiser_set_cur_dcid(ch->txp, &ch->init_scid); |
| } |
| |
| enc_level = ossl_quic_pkt_type_to_enc_level(ch->qrx_pkt->hdr->type); |
| if ((ch->el_discarded & (1U << enc_level)) != 0) |
| /* Do not process packets from ELs we have already discarded. */ |
| return; |
| } |
| |
| /* |
| * RFC 9000 s. 9.6: "If a client receives packets from a new server address |
| * when the client has not initiated a migration to that address, the client |
| * SHOULD discard these packets." |
| * |
| * We need to be a bit careful here as due to the BIO abstraction layer an |
| * application is liable to be weird and lie to us about peer addresses. |
| * Only apply this check if we actually are using a real AF_INET or AF_INET6 |
| * address. |
| */ |
| if (!ch->is_server |
| && ch->qrx_pkt->peer != NULL |
| && ( |
| BIO_ADDR_family(&ch->cur_peer_addr) == AF_INET |
| #if OPENSSL_USE_IPV6 |
| || BIO_ADDR_family(&ch->cur_peer_addr) == AF_INET6 |
| #endif |
| ) |
| && !bio_addr_eq(ch->qrx_pkt->peer, &ch->cur_peer_addr)) |
| return; |
| |
| if (!ch->is_server |
| && ch->have_received_enc_pkt |
| && ossl_quic_pkt_type_has_scid(ch->qrx_pkt->hdr->type)) { |
| /* |
| * RFC 9000 s. 7.2: "Once a client has received a valid Initial packet |
| * from the server, it MUST discard any subsequent packet it receives on |
| * that connection with a different SCID." |
| */ |
| if (!ossl_quic_conn_id_eq(&ch->qrx_pkt->hdr->src_conn_id, |
| &ch->init_scid)) |
| return; |
| } |
| |
| if (ossl_quic_pkt_type_has_version(ch->qrx_pkt->hdr->type) |
| && ch->qrx_pkt->hdr->version != QUIC_VERSION_1) |
| /* |
| * RFC 9000 s. 5.2.1: If a client receives a packet that uses a |
| * different version than it initially selected, it MUST discard the |
| * packet. We only ever use v1, so require it. |
| */ |
| return; |
| |
| if (ch->qrx_pkt->hdr->type == QUIC_PKT_TYPE_VERSION_NEG) { |
| |
| /* |
| * Sanity check. Version negotiation packet MUST have a version |
| * value of 0 according to the RFC. We must discard such packets |
| */ |
| if (ch->qrx_pkt->hdr->version != 0) |
| return; |
| |
| /* |
| * RFC 9000 s. 6.2: If a client receives a version negotiation |
| * packet, we need to do the following: |
| * a) If the negotiation packet lists the version we initially sent |
| * then we must abandon this connection attempt |
| * b) We have to select a version from the list provided in the |
| * version negotiation packet, and retry the connection attempt |
| * in much the same way that ch_retry does, but we can reuse the |
| * connection id values |
| */ |
| |
| if (old_have_processed_any_pkt == 1) { |
| /* |
| * We've gotten previous packets, need to discard this. |
| */ |
| return; |
| } |
| |
| /* |
| * Indicate that we have processed a packet, as any subsequently |
| * received version negotiation packet must be discarded above |
| */ |
| ch->have_processed_any_pkt = 1; |
| |
| /* |
| * Following the header, version negotiation packets |
| * contain an array of 32 bit integers representing |
| * the supported versions that the server honors |
| * this array, bounded by the hdr->len field |
| * needs to be traversed so that we can find a matching |
| * version |
| */ |
| if (!PACKET_buf_init(&vpkt, ch->qrx_pkt->hdr->data, |
| ch->qrx_pkt->hdr->len)) |
| return; |
| |
| while (PACKET_remaining(&vpkt) > 0) { |
| /* |
| * We only support quic version 1 at the moment, so |
| * look to see if thats offered |
| */ |
| if (!PACKET_get_net_4(&vpkt, &supported_ver)) |
| return; |
| |
| supported_ver = ntohl(supported_ver); |
| if (supported_ver == QUIC_VERSION_1) { |
| /* |
| * If the server supports version 1, set it as |
| * the packetisers version |
| */ |
| ossl_quic_tx_packetiser_set_protocol_version(ch->txp, QUIC_VERSION_1); |
| |
| /* |
| * And then request a restart of the QUIC connection |
| */ |
| if (!ch_restart(ch)) |
| ossl_quic_channel_raise_protocol_error(ch, |
| OSSL_QUIC_ERR_INTERNAL_ERROR, |
| 0, "handling ver negotiation packet"); |
| return; |
| } |
| } |
| |
| /* |
| * If we get here, then the server doesn't support a version of the |
| * protocol that we can handle, abandon the connection |
| */ |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_CONNECTION_REFUSED, |
| 0, "unsupported protocol version"); |
| return; |
| } |
| |
| ch->have_processed_any_pkt = 1; |
| |
| /* |
| * RFC 9000 s. 17.2: "An endpoint MUST treat receipt of a packet that has a |
| * non-zero value for [the reserved bits] after removing both packet and |
| * header protection as a connection error of type PROTOCOL_VIOLATION." |
| */ |
| if (ossl_quic_pkt_type_is_encrypted(ch->qrx_pkt->hdr->type) |
| && ch->qrx_pkt->hdr->reserved != 0) { |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_PROTOCOL_VIOLATION, |
| 0, "packet header reserved bits"); |
| return; |
| } |
| |
| iovec.buf = ch->qrx_pkt->hdr->data; |
| iovec.buf_len = ch->qrx_pkt->hdr->len; |
| ossl_qlog_event_transport_packet_received(ch_get_qlog(ch), ch->qrx_pkt->hdr, |
| ch->qrx_pkt->pn, &iovec, 1, |
| ch->qrx_pkt->datagram_id); |
| |
| /* Handle incoming packet. */ |
| switch (ch->qrx_pkt->hdr->type) { |
| case QUIC_PKT_TYPE_RETRY: |
| if (ch->doing_retry || ch->is_server) |
| /* |
| * It is not allowed to ask a client to do a retry more than |
| * once. Clients may not send retries. |
| */ |
| return; |
| |
| /* |
| * RFC 9000 s 17.2.5.2: After the client has received and processed an |
| * Initial or Retry packet from the server, it MUST discard any |
| * subsequent Retry packets that it receives. |
| */ |
| if (ch->have_received_enc_pkt) |
| return; |
| |
| if (ch->qrx_pkt->hdr->len <= QUIC_RETRY_INTEGRITY_TAG_LEN) |
| /* Packets with zero-length Retry Tokens are invalid. */ |
| return; |
| |
| /* |
| * TODO(QUIC FUTURE): Theoretically this should probably be in the QRX. |
| * However because validation is dependent on context (namely the |
| * client's initial DCID) we can't do this cleanly. In the future we |
| * should probably add a callback to the QRX to let it call us (via |
| * the DEMUX) and ask us about the correct original DCID, rather |
| * than allow the QRX to emit a potentially malformed packet to the |
| * upper layers. However, special casing this will do for now. |
| */ |
| if (!ossl_quic_validate_retry_integrity_tag(ch->port->engine->libctx, |
| ch->port->engine->propq, |
| ch->qrx_pkt->hdr, |
| &ch->init_dcid)) |
| /* Malformed retry packet, ignore. */ |
| return; |
| |
| if (!ch_retry(ch, ch->qrx_pkt->hdr->data, |
| ch->qrx_pkt->hdr->len - QUIC_RETRY_INTEGRITY_TAG_LEN, |
| &ch->qrx_pkt->hdr->src_conn_id, old_have_processed_any_pkt)) |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_INTERNAL_ERROR, |
| 0, "handling retry packet"); |
| break; |
| |
| case QUIC_PKT_TYPE_0RTT: |
| if (!ch->is_server) |
| /* Clients should never receive 0-RTT packets. */ |
| return; |
| |
| /* |
| * TODO(QUIC 0RTT): Implement 0-RTT on the server side. We currently |
| * do not need to implement this as a client can only do 0-RTT if we |
| * have given it permission to in a previous session. |
| */ |
| break; |
| |
| case QUIC_PKT_TYPE_INITIAL: |
| case QUIC_PKT_TYPE_HANDSHAKE: |
| case QUIC_PKT_TYPE_1RTT: |
| if (ch->is_server && ch->qrx_pkt->hdr->type == QUIC_PKT_TYPE_HANDSHAKE) |
| /* |
| * We automatically drop INITIAL EL keys when first successfully |
| * decrypting a HANDSHAKE packet, as per the RFC. |
| */ |
| ch_discard_el(ch, QUIC_ENC_LEVEL_INITIAL); |
| |
| if (ch->rxku_in_progress |
| && ch->qrx_pkt->hdr->type == QUIC_PKT_TYPE_1RTT |
| && ch->qrx_pkt->pn >= ch->rxku_trigger_pn |
| && ch->qrx_pkt->key_epoch < ossl_qrx_get_key_epoch(ch->qrx)) { |
| /* |
| * RFC 9001 s. 6.4: Packets with higher packet numbers MUST be |
| * protected with either the same or newer packet protection keys |
| * than packets with lower packet numbers. An endpoint that |
| * successfully removes protection with old keys when newer keys |
| * were used for packets with lower packet numbers MUST treat this |
| * as a connection error of type KEY_UPDATE_ERROR. |
| */ |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_KEY_UPDATE_ERROR, |
| 0, "new packet with old keys"); |
| break; |
| } |
| |
| if (!ch->is_server |
| && ch->qrx_pkt->hdr->type == QUIC_PKT_TYPE_INITIAL |
| && ch->qrx_pkt->hdr->token_len > 0) { |
| /* |
| * RFC 9000 s. 17.2.2: Clients that receive an Initial packet with a |
| * non-zero Token Length field MUST either discard the packet or |
| * generate a connection error of type PROTOCOL_VIOLATION. |
| * |
| * TODO(QUIC FUTURE): consider the implications of RFC 9000 s. 10.2.3 |
| * Immediate Close during the Handshake: |
| * However, at the cost of reducing feedback about |
| * errors for legitimate peers, some forms of denial of |
| * service can be made more difficult for an attacker |
| * if endpoints discard illegal packets rather than |
| * terminating a connection with CONNECTION_CLOSE. For |
| * this reason, endpoints MAY discard packets rather |
| * than immediately close if errors are detected in |
| * packets that lack authentication. |
| * I.e. should we drop this packet instead of closing the connection? |
| */ |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_PROTOCOL_VIOLATION, |
| 0, "client received initial token"); |
| break; |
| } |
| |
| /* This packet contains frames, pass to the RXDP. */ |
| ossl_quic_handle_frames(ch, ch->qrx_pkt); /* best effort */ |
| |
| if (ch->did_crypto_frame) |
| ch_tick_tls(ch, channel_only, NULL); |
| |
| break; |
| |
| case QUIC_PKT_TYPE_VERSION_NEG: |
| /* |
| * "A client MUST discard any Version Negotiation packet if it has |
| * received and successfully processed any other packet." |
| */ |
| if (!old_have_processed_any_pkt) |
| ch_rx_handle_version_neg(ch, ch->qrx_pkt); |
| |
| break; |
| |
| default: |
| assert(0); |
| break; |
| } |
| |
| } |
| |
| static void ch_rx_handle_version_neg(QUIC_CHANNEL *ch, OSSL_QRX_PKT *pkt) |
| { |
| /* |
| * We do not support version negotiation at this time. As per RFC 9000 s. |
| * 6.2., we MUST abandon the connection attempt if we receive a Version |
| * Negotiation packet, unless we have already successfully processed another |
| * incoming packet, or the packet lists the QUIC version we want to use. |
| */ |
| PACKET vpkt; |
| unsigned long v; |
| |
| if (!PACKET_buf_init(&vpkt, pkt->hdr->data, pkt->hdr->len)) |
| return; |
| |
| while (PACKET_remaining(&vpkt) > 0) { |
| if (!PACKET_get_net_4(&vpkt, &v)) |
| break; |
| |
| if ((uint32_t)v == QUIC_VERSION_1) |
| return; |
| } |
| |
| /* No match, this is a failure case. */ |
| ch_raise_version_neg_failure(ch); |
| } |
| |
| static void ch_raise_version_neg_failure(QUIC_CHANNEL *ch) |
| { |
| QUIC_TERMINATE_CAUSE tcause = {0}; |
| |
| tcause.error_code = OSSL_QUIC_ERR_CONNECTION_REFUSED; |
| tcause.reason = "version negotiation failure"; |
| tcause.reason_len = strlen(tcause.reason); |
| |
| /* |
| * Skip TERMINATING state; this is not considered a protocol error and we do |
| * not send CONNECTION_CLOSE. |
| */ |
| ch_start_terminating(ch, &tcause, 1); |
| } |
| |
| /* Try to generate packets and if possible, flush them to the network. */ |
| static int ch_tx(QUIC_CHANNEL *ch, int *notify_other_threads) |
| { |
| QUIC_TXP_STATUS status; |
| int res; |
| |
| /* |
| * RFC 9000 s. 10.2.2: Draining Connection State: |
| * While otherwise identical to the closing state, an endpoint |
| * in the draining state MUST NOT send any packets. |
| * and: |
| * An endpoint MUST NOT send further packets. |
| */ |
| if (ossl_quic_channel_is_draining(ch)) |
| return 0; |
| |
| if (ossl_quic_channel_is_closing(ch)) { |
| /* |
| * While closing, only send CONN_CLOSE if we've received more traffic |
| * from the peer. Once we tell the TXP to generate CONN_CLOSE, all |
| * future calls to it generate CONN_CLOSE frames, so otherwise we would |
| * just constantly generate CONN_CLOSE frames. |
| * |
| * Confirming to RFC 9000 s. 10.2.1 Closing Connection State: |
| * An endpoint SHOULD limit the rate at which it generates |
| * packets in the closing state. |
| */ |
| if (!ch->conn_close_queued) |
| return 0; |
| |
| ch->conn_close_queued = 0; |
| } |
| |
| /* Do TXKU if we need to. */ |
| ch_maybe_trigger_spontaneous_txku(ch); |
| |
| ch->rxku_pending_confirm_done = 0; |
| |
| /* Loop until we stop generating packets to send */ |
| do { |
| /* |
| * Send packet, if we need to. Best effort. The TXP consults the CC and |
| * applies any limitations imposed by it, so we don't need to do it here. |
| * |
| * Best effort. In particular if TXP fails for some reason we should |
| * still flush any queued packets which we already generated. |
| */ |
| res = ossl_quic_tx_packetiser_generate(ch->txp, &status); |
| if (status.sent_pkt > 0) { |
| ch->have_sent_any_pkt = 1; /* Packet(s) were sent */ |
| ch->port->have_sent_any_pkt = 1; |
| |
| /* |
| * RFC 9000 s. 10.1. 'An endpoint also restarts its idle timer when |
| * sending an ack-eliciting packet if no other ack-eliciting packets |
| * have been sent since last receiving and processing a packet.' |
| */ |
| if (status.sent_ack_eliciting |
| && !ch->have_sent_ack_eliciting_since_rx) { |
| ch_update_idle(ch); |
| ch->have_sent_ack_eliciting_since_rx = 1; |
| } |
| |
| if (!ch->is_server && status.sent_handshake) |
| /* |
| * RFC 9001 s. 4.9.1: A client MUST discard Initial keys when it |
| * first sends a Handshake packet. |
| */ |
| ch_discard_el(ch, QUIC_ENC_LEVEL_INITIAL); |
| |
| if (ch->rxku_pending_confirm_done) |
| ch->rxku_pending_confirm = 0; |
| |
| ch_update_ping_deadline(ch); |
| } |
| |
| if (!res) { |
| /* |
| * One case where TXP can fail is if we reach a TX PN of 2**62 - 1. |
| * As per RFC 9000 s. 12.3, if this happens we MUST close the |
| * connection without sending a CONNECTION_CLOSE frame. This is |
| * actually handled as an emergent consequence of our design, as the |
| * TX packetiser will never transmit another packet when the TX PN |
| * reaches the limit. |
| * |
| * Calling the below function terminates the connection; its attempt |
| * to schedule a CONNECTION_CLOSE frame will not actually cause a |
| * packet to be transmitted for this reason. |
| */ |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_INTERNAL_ERROR, |
| 0, |
| "internal error (txp generate)"); |
| break; |
| } |
| } while (status.sent_pkt > 0); |
| |
| /* Flush packets to network. */ |
| switch (ossl_qtx_flush_net(ch->qtx)) { |
| case QTX_FLUSH_NET_RES_OK: |
| case QTX_FLUSH_NET_RES_TRANSIENT_FAIL: |
| /* Best effort, done for now. */ |
| break; |
| |
| case QTX_FLUSH_NET_RES_PERMANENT_FAIL: |
| default: |
| /* Permanent underlying network BIO, start terminating. */ |
| ossl_quic_port_raise_net_error(ch->port, ch); |
| break; |
| } |
| |
| /* |
| * If we have datagrams we have yet to successfully transmit, we need to |
| * notify other threads so that they can switch to polling on POLLOUT as |
| * well as POLLIN. |
| */ |
| if (ossl_qtx_get_queue_len_datagrams(ch->qtx) > 0) |
| *notify_other_threads = 1; |
| |
| return 1; |
| } |
| |
| /* Determine next tick deadline. */ |
| static OSSL_TIME ch_determine_next_tick_deadline(QUIC_CHANNEL *ch) |
| { |
| OSSL_TIME deadline; |
| int i; |
| |
| if (ossl_quic_channel_is_terminated(ch)) |
| return ossl_time_infinite(); |
| |
| deadline = ossl_ackm_get_loss_detection_deadline(ch->ackm); |
| if (ossl_time_is_zero(deadline)) |
| deadline = ossl_time_infinite(); |
| |
| /* |
| * Check the ack deadline for all enc_levels that are actually provisioned. |
| * ACKs aren't restricted by CC. |
| */ |
| for (i = 0; i < QUIC_ENC_LEVEL_NUM; i++) { |
| if (ossl_qtx_is_enc_level_provisioned(ch->qtx, i)) { |
| deadline = ossl_time_min(deadline, |
| ossl_ackm_get_ack_deadline(ch->ackm, |
| ossl_quic_enc_level_to_pn_space(i))); |
| } |
| } |
| |
| /* |
| * When do we need to send an ACK-eliciting packet to reset the idle |
| * deadline timer for the peer? |
| */ |
| if (!ossl_time_is_infinite(ch->ping_deadline)) |
| deadline = ossl_time_min(deadline, ch->ping_deadline); |
| |
| /* Apply TXP wakeup deadline. */ |
| deadline = ossl_time_min(deadline, |
| ossl_quic_tx_packetiser_get_deadline(ch->txp)); |
| |
| /* Is the terminating timer armed? */ |
| if (ossl_quic_channel_is_terminating(ch)) |
| deadline = ossl_time_min(deadline, |
| ch->terminate_deadline); |
| else if (!ossl_time_is_infinite(ch->idle_deadline)) |
| deadline = ossl_time_min(deadline, |
| ch->idle_deadline); |
| |
| /* When does the RXKU process complete? */ |
| if (ch->rxku_in_progress) |
| deadline = ossl_time_min(deadline, ch->rxku_update_end_deadline); |
| |
| return deadline; |
| } |
| |
| /* |
| * QUIC Channel: Lifecycle Events |
| * ============================== |
| */ |
| |
| /* |
| * Record a state transition. This is not necessarily a change to ch->state but |
| * also includes the handshake becoming complete or confirmed, etc. |
| */ |
| static void ch_record_state_transition(QUIC_CHANNEL *ch, uint32_t new_state) |
| { |
| uint32_t old_state = ch->state; |
| |
| ch->state = new_state; |
| |
| ossl_qlog_event_connectivity_connection_state_updated(ch_get_qlog(ch), |
| old_state, |
| new_state, |
| ch->handshake_complete, |
| ch->handshake_confirmed); |
| } |
| |
| static void free_peer_token(const unsigned char *token, |
| size_t token_len, void *arg) |
| { |
| ossl_quic_free_peer_token((QUIC_TOKEN *)arg); |
| } |
| |
| int ossl_quic_channel_start(QUIC_CHANNEL *ch) |
| { |
| QUIC_TOKEN *token; |
| |
| if (ch->is_server) |
| /* |
| * This is not used by the server. The server moves to active |
| * automatically on receiving an incoming connection. |
| */ |
| return 0; |
| |
| if (ch->state != QUIC_CHANNEL_STATE_IDLE) |
| /* Calls to connect are idempotent */ |
| return 1; |
| |
| /* Inform QTX of peer address. */ |
| if (!ossl_quic_tx_packetiser_set_peer(ch->txp, &ch->cur_peer_addr)) |
| return 0; |
| |
| /* |
| * Look to see if we have a token, and if so, set it on the packetiser |
| */ |
| if (!ch->is_server |
| && ossl_quic_get_peer_token(ch->port->channel_ctx, |
| &ch->cur_peer_addr, |
| &token) |
| && !ossl_quic_tx_packetiser_set_initial_token(ch->txp, token->token, |
| token->token_len, |
| free_peer_token, |
| token)) |
| free_peer_token(NULL, 0, token); |
| |
| /* Plug in secrets for the Initial EL. */ |
| if (!ossl_quic_provide_initial_secret(ch->port->engine->libctx, |
| ch->port->engine->propq, |
| &ch->init_dcid, |
| ch->is_server, |
| ch->qrx, ch->qtx)) |
| return 0; |
| |
| /* |
| * Determine the QUIC Transport Parameters and serialize the transport |
| * parameters block. (For servers, we do this later as we must defer |
| * generation until we have received the client's transport parameters.) |
| */ |
| if (!ch->is_server && !ch->got_local_transport_params |
| && !ch_generate_transport_params(ch)) |
| return 0; |
| |
| /* Change state. */ |
| ch_record_state_transition(ch, QUIC_CHANNEL_STATE_ACTIVE); |
| ch->doing_proactive_ver_neg = 0; /* not currently supported */ |
| |
| ossl_qlog_event_connectivity_connection_started(ch_get_qlog(ch), |
| &ch->init_dcid); |
| |
| /* Handshake layer: start (e.g. send CH). */ |
| if (!ch_tick_tls(ch, /*channel_only=*/0, NULL)) |
| return 0; |
| |
| ossl_quic_reactor_tick(ossl_quic_port_get0_reactor(ch->port), 0); /* best effort */ |
| return 1; |
| } |
| |
| static void free_token(const unsigned char *token, size_t token_len, void *arg) |
| { |
| OPENSSL_free((char *)token); |
| } |
| |
| /* Start a locally initiated connection shutdown. */ |
| void ossl_quic_channel_local_close(QUIC_CHANNEL *ch, uint64_t app_error_code, |
| const char *app_reason) |
| { |
| QUIC_TERMINATE_CAUSE tcause = {0}; |
| |
| if (ossl_quic_channel_is_term_any(ch)) |
| return; |
| |
| tcause.app = 1; |
| tcause.error_code = app_error_code; |
| tcause.reason = app_reason; |
| tcause.reason_len = app_reason != NULL ? strlen(app_reason) : 0; |
| ch_start_terminating(ch, &tcause, 0); |
| } |
| |
| /** |
| * ch_restart - Restarts the QUIC channel by simulating loss of the initial |
| * packet. This forces the packet to be regenerated with the updated protocol |
| * version number. |
| * |
| * @ch: Pointer to the QUIC_CHANNEL structure. |
| * |
| * Returns 1 on success, 0 on failure. |
| */ |
| static int ch_restart(QUIC_CHANNEL *ch) |
| { |
| /* |
| * Just pretend we lost our initial packet, so it gets |
| * regenerated, with our updated protocol version number |
| */ |
| return ossl_ackm_mark_packet_pseudo_lost(ch->ackm, QUIC_PN_SPACE_INITIAL, |
| /* PN= */ 0); |
| } |
| |
| /* Called when a server asks us to do a retry. */ |
| static int ch_retry(QUIC_CHANNEL *ch, |
| const unsigned char *retry_token, |
| size_t retry_token_len, |
| const QUIC_CONN_ID *retry_scid, |
| int drop_later_pn) |
| { |
| void *buf; |
| QUIC_PN pn = 0; |
| |
| /* |
| * RFC 9000 s. 17.2.5.1: "A client MUST discard a Retry packet that contains |
| * a SCID field that is identical to the DCID field of its initial packet." |
| */ |
| if (ossl_quic_conn_id_eq(&ch->init_dcid, retry_scid)) |
| return 1; |
| |
| /* We change to using the SCID in the Retry packet as the DCID. */ |
| if (!ossl_quic_tx_packetiser_set_cur_dcid(ch->txp, retry_scid)) |
| return 0; |
| |
| /* |
| * Now we retry. We will release the Retry packet immediately, so copy |
| * the token. |
| */ |
| if ((buf = OPENSSL_memdup(retry_token, retry_token_len)) == NULL) |
| return 0; |
| |
| if (!ossl_quic_tx_packetiser_set_initial_token(ch->txp, buf, |
| retry_token_len, |
| free_token, NULL)) { |
| /* |
| * This may fail if the token we receive is too big for us to ever be |
| * able to transmit in an outgoing Initial packet. |
| */ |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_INVALID_TOKEN, 0, |
| "received oversize token"); |
| OPENSSL_free(buf); |
| return 0; |
| } |
| |
| ch->retry_scid = *retry_scid; |
| ch->doing_retry = 1; |
| |
| /* |
| * If a retry isn't our first response, we need to drop packet number |
| * one instead (i.e. the case where we did version negotiation first |
| */ |
| if (drop_later_pn == 1) |
| pn = 1; |
| |
| /* |
| * We need to stimulate the Initial EL to generate the first CRYPTO frame |
| * again. We can do this most cleanly by simply forcing the ACKM to consider |
| * the first Initial packet as lost, which it effectively was as the server |
| * hasn't processed it. This also maintains the desired behaviour with e.g. |
| * PNs not resetting and so on. |
| * |
| * The PN we used initially is always zero, because QUIC does not allow |
| * repeated retries. |
| */ |
| if (!ossl_ackm_mark_packet_pseudo_lost(ch->ackm, QUIC_PN_SPACE_INITIAL, |
| pn)) |
| return 0; |
| |
| /* |
| * Plug in new secrets for the Initial EL. This is the only time we change |
| * the secrets for an EL after we already provisioned it. |
| */ |
| if (!ossl_quic_provide_initial_secret(ch->port->engine->libctx, |
| ch->port->engine->propq, |
| &ch->retry_scid, |
| /*is_server=*/0, |
| ch->qrx, ch->qtx)) |
| return 0; |
| |
| return 1; |
| } |
| |
| /* Called when an EL is to be discarded. */ |
| static int ch_discard_el(QUIC_CHANNEL *ch, |
| uint32_t enc_level) |
| { |
| if (!ossl_assert(enc_level < QUIC_ENC_LEVEL_1RTT)) |
| return 0; |
| |
| if ((ch->el_discarded & (1U << enc_level)) != 0) |
| /* Already done. */ |
| return 1; |
| |
| /* Best effort for all of these. */ |
| ossl_quic_tx_packetiser_discard_enc_level(ch->txp, enc_level); |
| ossl_qrx_discard_enc_level(ch->qrx, enc_level); |
| ossl_qtx_discard_enc_level(ch->qtx, enc_level); |
| |
| if (enc_level != QUIC_ENC_LEVEL_0RTT) { |
| uint32_t pn_space = ossl_quic_enc_level_to_pn_space(enc_level); |
| |
| ossl_ackm_on_pkt_space_discarded(ch->ackm, pn_space); |
| |
| /* We should still have crypto streams at this point. */ |
| if (!ossl_assert(ch->crypto_send[pn_space] != NULL) |
| || !ossl_assert(ch->crypto_recv[pn_space] != NULL)) |
| return 0; |
| |
| /* Get rid of the crypto stream state for the EL. */ |
| ossl_quic_sstream_free(ch->crypto_send[pn_space]); |
| ch->crypto_send[pn_space] = NULL; |
| |
| ossl_quic_rstream_free(ch->crypto_recv[pn_space]); |
| ch->crypto_recv[pn_space] = NULL; |
| } |
| |
| ch->el_discarded |= (1U << enc_level); |
| return 1; |
| } |
| |
| /* Intended to be called by the RXDP. */ |
| int ossl_quic_channel_on_handshake_confirmed(QUIC_CHANNEL *ch) |
| { |
| if (ch->handshake_confirmed) |
| return 1; |
| |
| if (!ch->handshake_complete) { |
| /* |
| * Does not make sense for handshake to be confirmed before it is |
| * completed. |
| */ |
| ossl_quic_channel_raise_protocol_error(ch, OSSL_QUIC_ERR_PROTOCOL_VIOLATION, |
| OSSL_QUIC_FRAME_TYPE_HANDSHAKE_DONE, |
| "handshake cannot be confirmed " |
| "before it is completed"); |
| return 0; |
| } |
| |
| ch_discard_el(ch, QUIC_ENC_LEVEL_HANDSHAKE); |
| ch->handshake_confirmed = 1; |
| ch_record_state_transition(ch, ch->state); |
| ossl_ackm_on_handshake_confirmed(ch->ackm); |
| return 1; |
| } |
| |
| /* |
| * Master function used when we want to start tearing down a connection: |
| * |
| * - If the connection is still IDLE we can go straight to TERMINATED; |
| * |
| * - If we are already TERMINATED this is a no-op. |
| * |
| * - If we are TERMINATING - CLOSING and we have now got a CONNECTION_CLOSE |
| * from the peer (tcause->remote == 1), we move to TERMINATING - DRAINING. |
| * |
| * - If we are TERMINATING - DRAINING, we remain here until the terminating |
| * timer expires. |
| * |
| * - Otherwise, we are in ACTIVE and move to TERMINATING - CLOSING. |
| * if we caused the termination (e.g. we have sent a CONNECTION_CLOSE). Note |
| * that we are considered to have caused a termination if we sent the first |
| * CONNECTION_CLOSE frame, even if it is caused by a peer protocol |
| * violation. If the peer sent the first CONNECTION_CLOSE frame, we move to |
| * TERMINATING - DRAINING. |
| * |
| * We record the termination cause structure passed on the first call only. |
| * Any successive calls have their termination cause data discarded; |
| * once we start sending a CONNECTION_CLOSE frame, we don't change the details |
| * in it. |
| * |
| * This conforms to RFC 9000 s. 10.2.1: Closing Connection State: |
| * To minimize the state that an endpoint maintains for a closing |
| * connection, endpoints MAY send the exact same packet in response |
| * to any received packet. |
| * |
| * We don't drop any connection state (specifically packet protection keys) |
| * even though we are permitted to. This conforms to RFC 9000 s. 10.2.1: |
| * Closing Connection State: |
| * An endpoint MAY retain packet protection keys for incoming |
| * packets to allow it to read and process a CONNECTION_CLOSE frame. |
| * |
| * Note that we do not conform to these two from the same section: |
| * An endpoint's selected connection ID and the QUIC version |
| * are sufficient information to identify packets for a closing |
| * connection; the endpoint MAY discard all other connection state. |
| * and: |
| * An endpoint MAY drop packet protection keys when entering the |
| * closing state and send a packet containing a CONNECTION_CLOSE |
| * frame in response to any UDP datagram that is received. |
| */ |
| static void copy_tcause(QUIC_TERMINATE_CAUSE *dst, |
| const QUIC_TERMINATE_CAUSE *src) |
| { |
| dst->error_code = src->error_code; |
| dst->frame_type = src->frame_type; |
| dst->app = src->app; |
| dst->remote = src->remote; |
| |
| dst->reason = NULL; |
| dst->reason_len = 0; |
| |
| if (src->reason != NULL && src->reason_len > 0) { |
| size_t l = src->reason_len; |
| char *r; |
| |
| if (l >= SIZE_MAX) |
| --l; |
| |
| /* |
| * If this fails, dst->reason becomes NULL and we simply do not use a |
| * reason. This ensures termination is infallible. |
| */ |
| dst->reason = r = OPENSSL_memdup(src->reason, l + 1); |
| if (r == NULL) |
| return; |
| |
| r[l] = '\0'; |
| dst->reason_len = l; |
| } |
| } |
| |
| static void ch_start_terminating(QUIC_CHANNEL *ch, |
| const QUIC_TERMINATE_CAUSE *tcause, |
| int force_immediate) |
| { |
| /* No point sending anything if we haven't sent anything yet. */ |
| if (!ch->have_sent_any_pkt) |
| force_immediate = 1; |
| |
| switch (ch->state) { |
| default: |
| case QUIC_CHANNEL_STATE_IDLE: |
| copy_tcause(&ch->terminate_cause, tcause); |
| ch_on_terminating_timeout(ch); |
| break; |
| |
| case QUIC_CHANNEL_STATE_ACTIVE: |
| copy_tcause(&ch->terminate_cause, tcause); |
| |
| ossl_qlog_event_connectivity_connection_closed(ch_get_qlog(ch), tcause); |
| |
| if (!force_immediate) { |
| ch_record_state_transition(ch, tcause->remote |
| ? QUIC_CHANNEL_STATE_TERMINATING_DRAINING |
| : QUIC_CHANNEL_STATE_TERMINATING_CLOSING); |
| /* |
| * RFC 9000 s. 10.2 Immediate Close |
| * These states SHOULD persist for at least three times |
| * the current PTO interval as defined in [QUIC-RECOVERY]. |
| */ |
| ch->terminate_deadline |
| = ossl_time_add(get_time(ch), |
| ossl_time_multiply(ossl_ackm_get_pto_duration(ch->ackm), |
| 3)); |
| |
| if (!tcause->remote) { |
| OSSL_QUIC_FRAME_CONN_CLOSE f = {0}; |
| |
| /* best effort */ |
| f.error_code = ch->terminate_cause.error_code; |
| f.frame_type = ch->terminate_cause.frame_type; |
| f.is_app = ch->terminate_cause.app; |
| f.reason = (char *)ch->terminate_cause.reason; |
| f.reason_len = ch->terminate_cause.reason_len; |
| ossl_quic_tx_packetiser_schedule_conn_close(ch->txp, &f); |
| /* |
| * RFC 9000 s. 10.2.2 Draining Connection State: |
| * An endpoint that receives a CONNECTION_CLOSE frame MAY |
| * send a single packet containing a CONNECTION_CLOSE |
| * frame before entering the draining state, using a |
| * NO_ERROR code if appropriate |
| */ |
| ch->conn_close_queued = 1; |
| } |
| } else { |
| ch_on_terminating_timeout(ch); |
| } |
| break; |
| |
| case QUIC_CHANNEL_STATE_TERMINATING_CLOSING: |
| if (force_immediate) |
| ch_on_terminating_timeout(ch); |
| else if (tcause->remote) |
| /* |
| * RFC 9000 s. 10.2.2 Draining Connection State: |
| * An endpoint MAY enter the draining state from the |
| * closing state if it receives a CONNECTION_CLOSE frame, |
| * which indicates that the peer is also closing or draining. |
| */ |
| ch_record_state_transition(ch, QUIC_CHANNEL_STATE_TERMINATING_DRAINING); |
| |
| break; |
| |
| case QUIC_CHANNEL_STATE_TERMINATING_DRAINING: |
| /* |
| * Other than in the force-immediate case, we remain here until the |
| * timeout expires. |
| */ |
| if (force_immediate) |
| ch_on_terminating_timeout(ch); |
| |
| break; |
| |
| case QUIC_CHANNEL_STATE_TERMINATED: |
| /* No-op. */ |
| break; |
| } |
| } |
| |
| /* For RXDP use. */ |
| void ossl_quic_channel_on_remote_conn_close(QUIC_CHANNEL *ch, |
| OSSL_QUIC_FRAME_CONN_CLOSE *f) |
| { |
| QUIC_TERMINATE_CAUSE tcause = {0}; |
| |
| if (!ossl_quic_channel_is_active(ch)) |
| return; |
| |
| tcause.remote = 1; |
| tcause.app = f->is_app; |
| tcause.error_code = f->error_code; |
| tcause.frame_type = f->frame_type; |
| tcause.reason = f->reason; |
| tcause.reason_len = f->reason_len; |
| ch_start_terminating(ch, &tcause, 0); |
| } |
| |
| static void free_frame_data(unsigned char *buf, size_t buf_len, void *arg) |
| { |
| OPENSSL_free(buf); |
| } |
| |
| static int ch_enqueue_retire_conn_id(QUIC_CHANNEL *ch, uint64_t seq_num) |
| { |
| BUF_MEM *buf_mem = NULL; |
| WPACKET wpkt; |
| size_t l; |
| |
| ossl_quic_srtm_remove(ch->srtm, ch, seq_num); |
| |
| if ((buf_mem = BUF_MEM_new()) == NULL) |
| goto err; |
| |
| if (!WPACKET_init(&wpkt, buf_mem)) |
| goto err; |
| |
| if (!ossl_quic_wire_encode_frame_retire_conn_id(&wpkt, seq_num)) { |
| WPACKET_cleanup(&wpkt); |
| goto err; |
| } |
| |
| WPACKET_finish(&wpkt); |
| if (!WPACKET_get_total_written(&wpkt, &l)) |
| goto err; |
| |
| if (ossl_quic_cfq_add_frame(ch->cfq, 1, QUIC_PN_SPACE_APP, |
| OSSL_QUIC_FRAME_TYPE_RETIRE_CONN_ID, 0, |
| (unsigned char *)buf_mem->data, l, |
| free_frame_data, NULL) == NULL) |
| goto err; |
| |
| buf_mem->data = NULL; |
| BUF_MEM_free(buf_mem); |
| return 1; |
| |
| err: |
| ossl_quic_channel_raise_protocol_error(ch, |
| OSSL_QUIC_ERR_INTERNAL_ERROR, |
| OSSL_QUIC_FRAME_TYPE_NEW_CONN_ID, |
| "internal error enqueueing retire conn id"); |
| BUF_MEM_free(buf_mem); |
| return 0; |
| } |
| |
| void ossl_quic_channel_on_new_conn_id(QUIC_CHANNEL *ch, |
| OSSL_QUIC_FRAME_NEW_CONN_ID *f) |
| { |
| uint64_t new_remote_seq_num = ch->cur_remote_seq_num; |
| uint64_t new_retire_prior_to = ch->cur_retire_prior_to; |
| |
| if (!ossl_quic_channel_is_active(ch)) |
| return; |
| |
| /* We allow only two active connection ids; first check some constraints */ |
| if (ch->cur_remote_dcid.id_len == 0) { |
| /* Changing from 0 length connection id is disallowed */ |
| ossl_quic_channel_raise_protocol_error(ch, |
| OSSL_QUIC_ERR_PROTOCOL_VIOLATION, |
| OSSL_QUIC_FRAME_TYPE_NEW_CONN_ID, |
| "zero length connection id in use"); |
| |
| return; |
| } |
| |
| if (f->seq_num > new_remote_seq_num) |
| new_remote_seq_num = f->seq_num; |
| if (f->retire_prior_to > new_retire_prior_to) |
| new_retire_prior_to = f->retire_prior_to; |
| |
| /* |
| * RFC 9000-5.1.1: An endpoint MUST NOT provide more connection IDs |
| * than the peer's limit. |
| * |
| * After processing a NEW_CONNECTION_ID frame and adding and retiring |
| * active connection IDs, if the number of active connection IDs exceeds |
| * the value advertised in its active_connection_id_limit transport |
| * parameter, an endpoint MUST close the connection with an error of |
| * type CONNECTION_ID_LIMIT_ERROR. |
| */ |
| if (new_remote_seq_num - new_retire_prior_to > 1) { |
| ossl_quic_channel_raise_protocol_error(ch, |
| OSSL_QUIC_ERR_CONNECTION_ID_LIMIT_ERROR, |
| OSSL_QUIC_FRAME_TYPE_NEW_CONN_ID, |
| "active_connection_id limit violated"); |
| return; |
| } |
| |
| /* |
| * RFC 9000-5.1.1: An endpoint MAY send connection IDs that temporarily |
| * exceed a peer's limit if the NEW_CONNECTION_ID frame also requires |
| * the retirement of any excess, by including a sufficiently large |
| * value in the Retire Prior To field. |
| * |
| * RFC 9000-5.1.2: An endpoint SHOULD allow for sending and tracking |
| * a number of RETIRE_CONNECTION_ID frames of at least twice the value |
| * of the active_connection_id_limit transport parameter. An endpoint |
| * MUST NOT forget a connection ID without retiring it, though it MAY |
| * choose to treat having connection IDs in need of retirement that |
| * exceed this limit as a connection error of type CONNECTION_ID_LIMIT_ERROR. |
| * |
| * We are a little bit more liberal than the minimum mandated. |
| */ |
| if (new_retire_prior_to - ch->cur_retire_prior_to > 10) { |
| ossl_quic_channel_raise_protocol_error(ch, |
| OSSL_QUIC_ERR_CONNECTION_ID_LIMIT_ERROR, |
| OSSL_QUIC_FRAME_TYPE_NEW_CONN_ID, |
| "retiring connection id limit violated"); |
| |
| return; |
| } |
| |
| if (new_remote_seq_num > ch->cur_remote_seq_num) { |
| /* Add new stateless reset token */ |
| if (!ossl_quic_srtm_add(ch->srtm, ch, new_remote_seq_num, |
| &f->stateless_reset)) { |
| ossl_quic_channel_raise_protocol_error( |
| ch, OSSL_QUIC_ERR_CONNECTION_ID_LIMIT_ERROR, |
| OSSL_QUIC_FRAME_TYPE_NEW_CONN_ID, |
| "unable to store stateless reset token"); |
| |
| return; |
| } |
| ch->cur_remote_seq_num = new_remote_seq_num; |
| ch->cur_remote_dcid = f->conn_id; |
| ossl_quic_tx_packetiser_set_cur_dcid(ch->txp, &ch->cur_remote_dcid); |
| } |
| |
| /* |
| * RFC 9000-5.1.2: Upon receipt of an increased Retire Prior To |
| * field, the peer MUST stop using the corresponding connection IDs |
| * and retire them with RETIRE_CONNECTION_ID frames before adding the |
| * newly provided connection ID to the set of active connection IDs. |
| */ |
| |
| /* |
| * Note: RFC 9000 s. 19.15 says: |
| * "An endpoint that receives a NEW_CONNECTION_ID frame with a sequence |
| * number smaller than the Retire Prior To field of a previously received |
| * NEW_CONNECTION_ID frame MUST send a corresponding |
| * RETIRE_CONNECTION_ID frame that retires the newly received connection |
| * ID, unless it has already done so for that sequence number." |
| * |
| * Since we currently always queue RETIRE_CONN_ID frames based on the Retire |
| * Prior To field of a NEW_CONNECTION_ID frame immediately upon receiving |
| * that NEW_CONNECTION_ID frame, by definition this will always be met. |
| * This may change in future when we change our CID handling. |
| */ |
| while (new_retire_prior_to > ch->cur_retire_prior_to) { |
| if (!ch_enqueue_retire_conn_id(ch, ch->cur_retire_prior_to)) |
| break; |
| ++ch->cur_retire_prior_to; |
| } |
| } |
| |
| static void ch_save_err_state(QUIC_CHANNEL *ch) |
| { |
| if (ch->err_state == NULL) |
| ch->err_state = OSSL_ERR_STATE_new(); |
| |
| if (ch->err_state == NULL) |
| return; |
| |
| OSSL_ERR_STATE_save(ch->err_state); |
| } |
| |
| void ossl_quic_channel_inject(QUIC_CHANNEL *ch, QUIC_URXE *e) |
| { |
| ossl_qrx_inject_urxe(ch->qrx, e); |
| } |
| |
| void ossl_quic_channel_inject_pkt(QUIC_CHANNEL *ch, OSSL_QRX_PKT *qpkt) |
| { |
| ossl_qrx_inject_pkt(ch->qrx, qpkt); |
| } |
| |
| void ossl_quic_channel_on_stateless_reset(QUIC_CHANNEL *ch) |
| { |
| QUIC_TERMINATE_CAUSE tcause = {0}; |
| |
| tcause.error_code = OSSL_QUIC_ERR_NO_ERROR; |
| tcause.remote = 1; |
| ch_start_terminating(ch, &tcause, 0); |
| } |
| |
| void ossl_quic_channel_raise_net_error(QUIC_CHANNEL *ch) |
| { |
| QUIC_TERMINATE_CAUSE tcause = {0}; |
| |
| if (ch->net_error) |
| return; |
| |
| ch->net_error = 1; |
| |
| tcause.error_code = OSSL_QUIC_ERR_INTERNAL_ERROR; |
| tcause.reason = "network BIO I/O error"; |
| tcause.reason_len = strlen(tcause.reason); |
| |
| /* |
| * Skip Terminating state and go directly to Terminated, no point trying to |
| * send CONNECTION_CLOSE if we cannot communicate. |
| */ |
| ch_start_terminating(ch, &tcause, 1); |
| } |
| |
| int ossl_quic_channel_net_error(QUIC_CHANNEL *ch) |
| { |
| return ch->net_error; |
| } |
| |
| void ossl_quic_channel_restore_err_state(QUIC_CHANNEL *ch) |
| { |
| if (ch == NULL) |
| return; |
| |
| if (!ossl_quic_port_is_running(ch->port)) |
| ossl_quic_port_restore_err_state(ch->port); |
| else |
| OSSL_ERR_STATE_restore(ch->err_state); |
| } |
| |
| void ossl_quic_channel_raise_protocol_error_loc(QUIC_CHANNEL *ch, |
| uint64_t error_code, |
| uint64_t frame_type, |
| const char *reason, |
| ERR_STATE *err_state, |
| const char *src_file, |
| int src_line, |
| const char *src_func) |
| { |
| QUIC_TERMINATE_CAUSE tcause = {0}; |
| int err_reason = error_code == OSSL_QUIC_ERR_INTERNAL_ERROR |
| ? ERR_R_INTERNAL_ERROR : SSL_R_QUIC_PROTOCOL_ERROR; |
| const char *err_str = ossl_quic_err_to_string(error_code); |
| const char *err_str_pfx = " (", *err_str_sfx = ")"; |
| const char *ft_str = NULL; |
| const char *ft_str_pfx = " (", *ft_str_sfx = ")"; |
| |
| if (ch->protocol_error) |
| /* Only the first call to this function matters. */ |
| return; |
| |
| if (err_str == NULL) { |
| err_str = ""; |
| err_str_pfx = ""; |
| err_str_sfx = ""; |
| } |
| |
| /* |
| * If we were provided an underlying error state, restore it and then append |
| * our ERR on top as a "cover letter" error. |
| */ |
| if (err_state != NULL) |
| OSSL_ERR_STATE_restore(err_state); |
| |
| if (frame_type != 0) { |
| ft_str = ossl_quic_frame_type_to_string(frame_type); |
| if (ft_str == NULL) { |
| ft_str = ""; |
| ft_str_pfx = ""; |
| ft_str_sfx = ""; |
| } |
| |
| ERR_raise_data(ERR_LIB_SSL, err_reason, |
| "QUIC error code: 0x%llx%s%s%s " |
| "(triggered by frame type: 0x%llx%s%s%s), reason: \"%s\"", |
| (unsigned long long) error_code, |
| err_str_pfx, err_str, err_str_sfx, |
| (unsigned long long) frame_type, |
| ft_str_pfx, ft_str, ft_str_sfx, |
| reason); |
| } else { |
| ERR_raise_data(ERR_LIB_SSL, err_reason, |
| "QUIC error code: 0x%llx%s%s%s, reason: \"%s\"", |
| (unsigned long long) error_code, |
| err_str_pfx, err_str, err_str_sfx, |
| reason); |
| } |
| |
| if (src_file != NULL) |
| ERR_set_debug(src_file, src_line, src_func); |
| |
| ch_save_err_state(ch); |
| |
| tcause.error_code = error_code; |
| tcause.frame_type = frame_type; |
| tcause.reason = reason; |
| tcause.reason_len = strlen(reason); |
| |
| ch->protocol_error = 1; |
| ch_start_terminating(ch, &tcause, 0); |
| } |
| |
| /* |
| * Called once the terminating timer expires, meaning we move from TERMINATING |
| * to TERMINATED. |
| */ |
| static void ch_on_terminating_timeout(QUIC_CHANNEL *ch) |
| { |
| ch_record_state_transition(ch, QUIC_CHANNEL_STATE_TERMINATED); |
| } |
| |
| /* |
| * Determines the effective idle timeout duration. This is based on the idle |
| * timeout values that we and our peer signalled in transport parameters |
| * but have some limits applied. |
| */ |
| static OSSL_TIME ch_get_effective_idle_timeout_duration(QUIC_CHANNEL *ch) |
| { |
| OSSL_TIME pto; |
| |
| if (ch->max_idle_timeout == 0) |
| return ossl_time_infinite(); |
| |
| /* |
| * RFC 9000 s. 10.1: Idle Timeout |
| * To avoid excessively small idle timeout periods, endpoints |
| * MUST increase the idle timeout period to be at least three |
| * times the current Probe Timeout (PTO). This allows for |
| * multiple PTOs to expire, and therefore multiple probes to |
| * be sent and lost, prior to idle timeout. |
| */ |
| pto = ossl_ackm_get_pto_duration(ch->ackm); |
| return ossl_time_max(ossl_ms2time(ch->max_idle_timeout), |
| ossl_time_multiply(pto, 3)); |
| } |
| |
| /* |
| * Updates our idle deadline. Called when an event happens which should bump the |
| * idle timeout. |
| */ |
| static void ch_update_idle(QUIC_CHANNEL *ch) |
| { |
| ch->idle_deadline = ossl_time_add(get_time(ch), |
| ch_get_effective_idle_timeout_duration(ch)); |
| } |
| |
| /* |
| * Updates our ping deadline, which determines when we next generate a ping if |
| * we don't have any other ACK-eliciting frames to send. |
| */ |
| static void ch_update_ping_deadline(QUIC_CHANNEL *ch) |
| { |
| OSSL_TIME max_span, idle_duration; |
| |
| idle_duration = ch_get_effective_idle_timeout_duration(ch); |
| if (ossl_time_is_infinite(idle_duration)) { |
| ch->ping_deadline = ossl_time_infinite(); |
| return; |
| } |
| |
| /* |
| * Maximum amount of time without traffic before we send a PING to keep |
| * the connection open. Usually we use max_idle_timeout/2, but ensure |
| * the period never exceeds the assumed NAT interval to ensure NAT |
| * devices don't have their state time out (RFC 9000 s. 10.1.2). |
| */ |
| max_span = ossl_time_divide(idle_duration, 2); |
| max_span = ossl_time_min(max_span, MAX_NAT_INTERVAL); |
| ch->ping_deadline = ossl_time_add(get_time(ch), max_span); |
| } |
| |
| /* Called when the idle timeout expires. */ |
| static void ch_on_idle_timeout(QUIC_CHANNEL *ch) |
| { |
| /* |
| * Idle timeout does not have an error code associated with it because a |
| * CONN_CLOSE is never sent for it. We shouldn't use this data once we reach |
| * TERMINATED anyway. |
| */ |
| ch->terminate_cause.app = 0; |
| ch->terminate_cause.error_code = OSSL_QUIC_LOCAL_ERR_IDLE_TIMEOUT; |
| ch->terminate_cause.frame_type = 0; |
| |
| ch_record_state_transition(ch, QUIC_CHANNEL_STATE_TERMINATED); |
| } |
| |
| /** |
| * @brief Common handler for initializing a new QUIC connection. |
| * |
| * This function configures a QUIC channel (`QUIC_CHANNEL *ch`) for a new |
| * connection by setting the peer address, connection IDs, and necessary |
| * callbacks. It establishes initial secrets, sets up logging, and performs |
| * required transitions for the channel state. |
| * |
| * @param ch Pointer to the QUIC channel being initialized. |
| * @param peer Address of the peer to which the channel connects. |
| * @param peer_scid Peer-specified source connection ID. |
| * @param peer_dcid Peer-specified destination connection ID. |
| * @param peer_odcid Peer-specified original destination connection ID |
| * may be NULL if retry frame not sent to client |
| * @return 1 on success, 0 on failure to set required elements. |
| */ |
| static int ch_on_new_conn_common(QUIC_CHANNEL *ch, const BIO_ADDR *peer, |
| const QUIC_CONN_ID *peer_scid, |
| const QUIC_CONN_ID *peer_dcid, |
| const QUIC_CONN_ID *peer_odcid) |
| { |
| /* Note our newly learnt peer address and CIDs. */ |
| if (!BIO_ADDR_copy(&ch->cur_peer_addr, peer)) |
| return 0; |
| |
| ch->init_dcid = *peer_dcid; |
| ch->cur_remote_dcid = *peer_scid; |
| ch->odcid.id_len = 0; |
| |
| if (peer_odcid != NULL) |
| ch->odcid = *peer_odcid; |
| |
| /* Inform QTX of peer address. */ |
| if (!ossl_quic_tx_packetiser_set_peer(ch->txp, &ch->cur_peer_addr)) |
| return 0; |
| |
| /* Inform TXP of desired CIDs. */ |
| if (!ossl_quic_tx_packetiser_set_cur_dcid(ch->txp, &ch->cur_remote_dcid)) |
| return 0; |
| |
| if (!ossl_quic_tx_packetiser_set_cur_scid(ch->txp, &ch->cur_local_cid)) |
| return 0; |
| |
| /* Setup QLOG, which did not happen earlier due to lacking an Initial ODCID. */ |
| ossl_qtx_set_qlog_cb(ch->qtx, ch_get_qlog_cb, ch); |
| ossl_quic_tx_packetiser_set_qlog_cb(ch->txp, ch_get_qlog_cb, ch); |
| |
| /* |
| * Plug in secrets for the Initial EL. secrets for QRX were created in |
| * port_default_packet_handler() already. |
| */ |
| if (!ossl_quic_provide_initial_secret(ch->port->engine->libctx, |
| ch->port->engine->propq, |
| &ch->init_dcid, |
| /*is_server=*/1, |
| NULL, ch->qtx)) |
| return 0; |
| |
| /* Register the peer ODCID in the LCIDM. */ |
| if (!ossl_quic_lcidm_enrol_odcid(ch->lcidm, ch, peer_odcid == NULL ? |
| &ch->init_dcid : |
| peer_odcid)) |
| return 0; |
| |
| /* Change state. */ |
| ch_record_state_transition(ch, QUIC_CHANNEL_STATE_ACTIVE); |
| ch->doing_proactive_ver_neg = 0; /* not currently supported */ |
| return 1; |
| } |
| |
| /* Called when we, as a server, get a new incoming connection. */ |
| int ossl_quic_channel_on_new_conn(QUIC_CHANNEL *ch, const BIO_ADDR *peer, |
| const QUIC_CONN_ID *peer_scid, |
| const QUIC_CONN_ID *peer_dcid) |
| { |
| if (!ossl_assert(ch->state == QUIC_CHANNEL_STATE_IDLE && ch->is_server)) |
| return 0; |
| |
| /* Generate an Initial LCID we will use for the connection. */ |
| if (!ossl_quic_lcidm_generate_initial(ch->lcidm, ch, &ch->cur_local_cid)) |
| return 0; |
| |
| return ch_on_new_conn_common(ch, peer, peer_scid, peer_dcid, NULL); |
| } |
| |
| /** |
| * Binds a QUIC channel to a specific peer's address and connection IDs. |
| * |
| * This function is used to establish a binding between a QUIC channel and a |
| * peer's address and connection IDs. The binding is performed only if the |
| * channel is idle and is on the server side. The peer's destination connection |
| * ID (`peer_dcid`) is mandatory, and the channel's current local connection ID |
| * is set to this value. |
| * |
| * @param ch Pointer to the QUIC_CHANNEL structure representing the |
| * channel to be bound. |
| * @param peer Pointer to a BIO_ADDR structure representing the peer's |
| * address. |
| * @param peer_scid Pointer to the peer's source connection ID (QUIC_CONN_ID). |
| * @param peer_dcid Pointer to the peer's destination connection ID |
| * (QUIC_CONN_ID). This must not be NULL. |
| * @param peer_odcid Pointer to the original destination connection ID |
| * (QUIC_CONN_ID) chosen by the peer in its first initial |
| * packet received without a token. |
| * |
| * @return 1 on success, or 0 on failure if the conditions for binding are not |
| * met (e.g., channel is not idle or not a server, or binding fails). |
| */ |
| int ossl_quic_bind_channel(QUIC_CHANNEL *ch, const BIO_ADDR *peer, |
| const QUIC_CONN_ID *peer_scid, |
| const QUIC_CONN_ID *peer_dcid, |
| const QUIC_CONN_ID *peer_odcid) |
| { |
| if (peer_dcid == NULL) |
| return 0; |
| |
| if (!ossl_assert(ch->state == QUIC_CHANNEL_STATE_IDLE && ch->is_server)) |
| return 0; |
| |
| ch->cur_local_cid = *peer_dcid; |
| if (!ossl_quic_lcidm_bind_channel(ch->lcidm, ch, peer_dcid)) |
| return 0; |
| |
| /* |
| * peer_odcid <=> is initial dst conn id chosen by peer in its |
| * first initial packet we received without token. |
| */ |
| return ch_on_new_conn_common(ch, peer, peer_scid, peer_dcid, peer_odcid); |
| } |
| |
| SSL *ossl_quic_channel_get0_ssl(QUIC_CHANNEL *ch) |
| { |
| return ch->tls; |
| } |
| |
| static int ch_init_new_stream(QUIC_CHANNEL *ch, QUIC_STREAM *qs, |
| int can_send, int can_recv) |
| { |
| uint64_t rxfc_wnd; |
| int server_init = ossl_quic_stream_is_server_init(qs); |
| int local_init = (ch->is_server == server_init); |
| int is_uni = !ossl_quic_stream_is_bidi(qs); |
| |
| if (can_send) |
| if ((qs->sstream = ossl_quic_sstream_new(INIT_APP_BUF_LEN)) == NULL) |
| goto err; |
| |
| if (can_recv) |
| if ((qs->rstream = ossl_quic_rstream_new(NULL, NULL, 0)) == NULL) |
| goto err; |
| |
| /* TXFC */ |
| if (!ossl_quic_txfc_init(&qs->txfc, &ch->conn_txfc)) |
| goto err; |
| |
| if (ch->got_remote_transport_params) { |
| /* |
| * If we already got peer TPs we need to apply the initial CWM credit |
| * now. If we didn't already get peer TPs this will be done |
| * automatically for all extant streams when we do. |
| */ |
| if (can_send) { |
| uint64_t cwm; |
| |
| if (is_uni) |
| cwm = ch->rx_init_max_stream_data_uni; |
| else if (local_init) |
| cwm = ch->rx_init_max_stream_data_bidi_local; |
| else |
| cwm = ch->rx_init_max_stream_data_bidi_remote; |
| |
| ossl_quic_txfc_bump_cwm(&qs->txfc, cwm); |
| } |
| } |
| |
| /* RXFC */ |
| if (!can_recv) |
| rxfc_wnd = 0; |
| else if (is_uni) |
| rxfc_wnd = ch->tx_init_max_stream_data_uni; |
| else if (local_init) |
| rxfc_wnd = ch->tx_init_max_stream_data_bidi_local; |
| else |
| rxfc_wnd = ch->tx_init_max_stream_data_bidi_remote; |
| |
| if (!ossl_quic_rxfc_init(&qs->rxfc, &ch->conn_rxfc, |
| rxfc_wnd, |
| DEFAULT_STREAM_RXFC_MAX_WND_MUL * rxfc_wnd, |
| get_time, ch)) |
| goto err; |
| |
| return 1; |
| |
| err: |
| ossl_quic_sstream_free(qs->sstream); |
| qs->sstream = NULL; |
| ossl_quic_rstream_free(qs->rstream); |
| qs->rstream = NULL; |
| return 0; |
| } |
| |
| static uint64_t *ch_get_local_stream_next_ordinal_ptr(QUIC_CHANNEL *ch, |
| int is_uni) |
| { |
| return is_uni ? &ch->next_local_stream_ordinal_uni |
| : &ch->next_local_stream_ordinal_bidi; |
| } |
| |
| static const uint64_t *ch_get_local_stream_max_ptr(const QUIC_CHANNEL *ch, |
| int is_uni) |
| { |
| return is_uni ? &ch->max_local_streams_uni |
| : &ch->max_local_streams_bidi; |
| } |
| |
| static const QUIC_RXFC *ch_get_remote_stream_count_rxfc(const QUIC_CHANNEL *ch, |
| int is_uni) |
| { |
| return is_uni ? &ch->max_streams_uni_rxfc |
| : &ch->max_streams_bidi_rxfc; |
| } |
| |
| int ossl_quic_channel_is_new_local_stream_admissible(QUIC_CHANNEL *ch, |
| int is_uni) |
| { |
| const uint64_t *p_next_ordinal = ch_get_local_stream_next_ordinal_ptr(ch, is_uni); |
| |
| return ossl_quic_stream_map_is_local_allowed_by_stream_limit(&ch->qsm, |
| *p_next_ordinal, |
| is_uni); |
| } |
| |
| uint64_t ossl_quic_channel_get_local_stream_count_avail(const QUIC_CHANNEL *ch, |
| int is_uni) |
| { |
| const uint64_t *p_next_ordinal, *p_max; |
| |
| p_next_ordinal = ch_get_local_stream_next_ordinal_ptr((QUIC_CHANNEL *)ch, |
| is_uni); |
| p_max = ch_get_local_stream_max_ptr(ch, is_uni); |
| |
| return *p_max - *p_next_ordinal; |
| } |
| |
| uint64_t ossl_quic_channel_get_remote_stream_count_avail(const QUIC_CHANNEL *ch, |
| int is_uni) |
| { |
| return ossl_quic_rxfc_get_credit(ch_get_remote_stream_count_rxfc(ch, is_uni)); |
| } |
| |
| QUIC_STREAM *ossl_quic_channel_new_stream_local(QUIC_CHANNEL *ch, int is_uni) |
| { |
| QUIC_STREAM *qs; |
| int type; |
| uint64_t stream_id; |
| uint64_t *p_next_ordinal; |
| |
| type = ch->is_server ? QUIC_STREAM_INITIATOR_SERVER |
| : QUIC_STREAM_INITIATOR_CLIENT; |
| |
| p_next_ordinal = ch_get_local_stream_next_ordinal_ptr(ch, is_uni); |
| |
| if (is_uni) |
| type |= QUIC_STREAM_DIR_UNI; |
| else |
| type |= QUIC_STREAM_DIR_BIDI; |
| |
| if (*p_next_ordinal >= ((uint64_t)1) << 62) |
| return NULL; |
| |
| stream_id = ((*p_next_ordinal) << 2) | type; |
| |
| if ((qs = ossl_quic_stream_map_alloc(&ch->qsm, stream_id, type)) == NULL) |
| return NULL; |
| |
| /* Locally-initiated stream, so we always want a send buffer. */ |
| if (!ch_init_new_stream(ch, qs, /*can_send=*/1, /*can_recv=*/!is_uni)) |
| goto err; |
| |
| ++*p_next_ordinal; |
| return qs; |
| |
| err: |
| ossl_quic_stream_map_release(&ch->qsm, qs); |
| return NULL; |
| } |
| |
| QUIC_STREAM *ossl_quic_channel_new_stream_remote(QUIC_CHANNEL *ch, |
| uint64_t stream_id) |
| { |
| uint64_t peer_role; |
| int is_uni; |
| QUIC_STREAM *qs; |
| |
| peer_role = ch->is_server |
| ? QUIC_STREAM_INITIATOR_CLIENT |
| : QUIC_STREAM_INITIATOR_SERVER; |
| |
| if ((stream_id & QUIC_STREAM_INITIATOR_MASK) != peer_role) |
| return NULL; |
| |
| is_uni = ((stream_id & QUIC_STREAM_DIR_MASK) == QUIC_STREAM_DIR_UNI); |
| |
| qs = ossl_quic_stream_map_alloc(&ch->qsm, stream_id, |
| stream_id & (QUIC_STREAM_INITIATOR_MASK |
| | QUIC_STREAM_DIR_MASK)); |
| if (qs == NULL) |
| return NULL; |
| |
| if (!ch_init_new_stream(ch, qs, /*can_send=*/!is_uni, /*can_recv=*/1)) |
| goto err; |
| |
| if (ch->incoming_stream_auto_reject) |
| ossl_quic_channel_reject_stream(ch, qs); |
| else |
| ossl_quic_stream_map_push_accept_queue(&ch->qsm, qs); |
| |
| return qs; |
| |
| err: |
| ossl_quic_stream_map_release(&ch->qsm, qs); |
| return NULL; |
| } |
| |
| void ossl_quic_channel_set_incoming_stream_auto_reject(QUIC_CHANNEL *ch, |
| int enable, |
| uint64_t aec) |
| { |
| ch->incoming_stream_auto_reject = (enable != 0); |
| ch->incoming_stream_auto_reject_aec = aec; |
| } |
| |
| void ossl_quic_channel_reject_stream(QUIC_CHANNEL *ch, QUIC_STREAM *qs) |
| { |
| ossl_quic_stream_map_stop_sending_recv_part(&ch->qsm, qs, |
| ch->incoming_stream_auto_reject_aec); |
| |
| ossl_quic_stream_map_reset_stream_send_part(&ch->qsm, qs, |
| ch->incoming_stream_auto_reject_aec); |
| qs->deleted = 1; |
| |
| ossl_quic_stream_map_update_state(&ch->qsm, qs); |
| } |
| |
| /* Replace local connection ID in TXP and DEMUX for testing purposes. */ |
| int ossl_quic_channel_replace_local_cid(QUIC_CHANNEL *ch, |
| const QUIC_CONN_ID *conn_id) |
| { |
| /* Remove the current LCID from the LCIDM. */ |
| if (!ossl_quic_lcidm_debug_remove(ch->lcidm, &ch->cur_local_cid)) |
| return 0; |
| ch->cur_local_cid = *conn_id; |
| /* Set in the TXP, used only for long header packets. */ |
| if (!ossl_quic_tx_packetiser_set_cur_scid(ch->txp, &ch->cur_local_cid)) |
| return 0; |
| /* Add the new LCID to the LCIDM. */ |
| if (!ossl_quic_lcidm_debug_add(ch->lcidm, ch, &ch->cur_local_cid, |
| 100)) |
| return 0; |
| return 1; |
| } |
| |
| void ossl_quic_channel_set_msg_callback(QUIC_CHANNEL *ch, |
| ossl_msg_cb msg_callback, |
| SSL *msg_callback_ssl) |
| { |
| ch->msg_callback = msg_callback; |
| ch->msg_callback_ssl = msg_callback_ssl; |
| ossl_qtx_set_msg_callback(ch->qtx, msg_callback, msg_callback_ssl); |
| ossl_quic_tx_packetiser_set_msg_callback(ch->txp, msg_callback, |
| msg_callback_ssl); |
| /* |
| * postpone msg callback setting for tserver until port calls |
| * port_bind_channel(). |
| */ |
| if (ch->is_tserver_ch == 0) |
| ossl_qrx_set_msg_callback(ch->qrx, msg_callback, msg_callback_ssl); |
| } |
| |
| void ossl_quic_channel_set_msg_callback_arg(QUIC_CHANNEL *ch, |
| void *msg_callback_arg) |
| { |
| ch->msg_callback_arg = msg_callback_arg; |
| ossl_qtx_set_msg_callback_arg(ch->qtx, msg_callback_arg); |
| ossl_quic_tx_packetiser_set_msg_callback_arg(ch->txp, msg_callback_arg); |
| |
| /* |
| * postpone msg callback setting for tserver until port calls |
| * port_bind_channel(). |
| */ |
| if (ch->is_tserver_ch == 0) |
| ossl_qrx_set_msg_callback_arg(ch->qrx, msg_callback_arg); |
| } |
| |
| void ossl_quic_channel_set_txku_threshold_override(QUIC_CHANNEL *ch, |
| uint64_t tx_pkt_threshold) |
| { |
| ch->txku_threshold_override = tx_pkt_threshold; |
| } |
| |
| uint64_t ossl_quic_channel_get_tx_key_epoch(QUIC_CHANNEL *ch) |
| { |
| return ossl_qtx_get_key_epoch(ch->qtx); |
| } |
| |
| uint64_t ossl_quic_channel_get_rx_key_epoch(QUIC_CHANNEL *ch) |
| { |
| return ossl_qrx_get_key_epoch(ch->qrx); |
| } |
| |
| int ossl_quic_channel_trigger_txku(QUIC_CHANNEL *ch) |
| { |
| if (!txku_allowed(ch)) |
| return 0; |
| |
| ch->ku_locally_initiated = 1; |
| ch_trigger_txku(ch); |
| return 1; |
| } |
| |
| int ossl_quic_channel_ping(QUIC_CHANNEL *ch) |
| { |
| int pn_space = ossl_quic_enc_level_to_pn_space(ch->tx_enc_level); |
| |
| ossl_quic_tx_packetiser_schedule_ack_eliciting(ch->txp, pn_space); |
| |
| return 1; |
| } |
| |
| uint16_t ossl_quic_channel_get_diag_num_rx_ack(QUIC_CHANNEL *ch) |
| { |
| return ch->diag_num_rx_ack; |
| } |
| |
| void ossl_quic_channel_get_diag_local_cid(QUIC_CHANNEL *ch, QUIC_CONN_ID *cid) |
| { |
| *cid = ch->cur_local_cid; |
| } |
| |
| int ossl_quic_channel_have_generated_transport_params(const QUIC_CHANNEL *ch) |
| { |
| return ch->got_local_transport_params; |
| } |
| |
| void ossl_quic_channel_set_max_idle_timeout_request(QUIC_CHANNEL *ch, uint64_t ms) |
| { |
| ch->max_idle_timeout_local_req = ms; |
| } |
| uint64_t ossl_quic_channel_get_max_idle_timeout_request(const QUIC_CHANNEL *ch) |
| { |
| return ch->max_idle_timeout_local_req; |
| } |
| |
| uint64_t ossl_quic_channel_get_max_idle_timeout_peer_request(const QUIC_CHANNEL *ch) |
| { |
| return ch->max_idle_timeout_remote_req; |
| } |
| |
| uint64_t ossl_quic_channel_get_max_idle_timeout_actual(const QUIC_CHANNEL *ch) |
| { |
| return ch->max_idle_timeout; |
| } |