| /* |
| * Copyright 2016-2026 The OpenSSL Project Authors. All Rights Reserved. |
| * |
| * Licensed under the Apache License 2.0 (the "License"). You may not use |
| * this file except in compliance with the License. You can obtain a copy |
| * in the file LICENSE in the source distribution or at |
| * https://www.openssl.org/source/license.html |
| */ |
| |
| #include "internal/e_os.h" |
| #include "crypto/cryptlib.h" |
| #include <openssl/err.h> |
| #include "crypto/rand.h" |
| #include "internal/bio.h" |
| #include <openssl/evp.h> |
| #include "crypto/evp.h" |
| #include "internal/conf.h" |
| #include "crypto/async.h" |
| #include "internal/comp.h" |
| #include "internal/err.h" |
| #include "crypto/err.h" |
| #include "crypto/objects.h" |
| #include <stdlib.h> |
| #include <assert.h> |
| #include "internal/thread_once.h" |
| #include "crypto/dso_conf.h" |
| #include "internal/dso.h" |
| #include "crypto/store.h" |
| #include <openssl/cmp_util.h> /* for OSSL_CMP_log_close() */ |
| #include <openssl/trace.h> |
| #include <openssl/ssl.h> /* for OPENSSL_INIT_(NO_)?LOAD_SSL_STRINGS */ |
| #include "crypto/bn.h" |
| #include "crypto/ctype.h" |
| #include "sslerr.h" |
| |
| #ifdef S390X_MOD_EXP |
| #include "s390x_arch.h" |
| #endif |
| |
| static int stopped = 0; |
| static uint64_t optsdone = 0; |
| |
| /* Guards access to the optsdone variable on platforms without atomics */ |
| static CRYPTO_RWLOCK *optsdone_lock = NULL; |
| /* Guards simultaneous INIT_LOAD_CONFIG calls with non-NULL settings */ |
| static CRYPTO_RWLOCK *init_lock = NULL; |
| static CRYPTO_THREAD_LOCAL in_init_config_local; |
| |
| static CRYPTO_ONCE base = CRYPTO_ONCE_STATIC_INIT; |
| static int base_inited = 0; |
| static int do_global_cleanup = 0; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_base) |
| { |
| /* no need to init trace */ |
| |
| OSSL_TRACE(INIT, "ossl_init_base: setting up stop handlers\n"); |
| #ifndef OPENSSL_NO_CRYPTO_MDEBUG |
| ossl_malloc_setup_failures(); |
| #endif |
| |
| if ((optsdone_lock = CRYPTO_THREAD_lock_new()) == NULL |
| || (init_lock = CRYPTO_THREAD_lock_new()) == NULL) |
| goto err; |
| |
| OPENSSL_cpuid_setup(); |
| |
| if (!ossl_init_thread()) |
| goto err; |
| |
| if (!CRYPTO_THREAD_init_local(&in_init_config_local, NULL)) |
| goto err; |
| |
| base_inited = 1; |
| return 1; |
| |
| err: |
| OSSL_TRACE(INIT, "ossl_init_base failed!\n"); |
| CRYPTO_THREAD_lock_free(optsdone_lock); |
| optsdone_lock = NULL; |
| CRYPTO_THREAD_lock_free(init_lock); |
| init_lock = NULL; |
| |
| return 0; |
| } |
| |
| static CRYPTO_ONCE load_crypto_strings = CRYPTO_ONCE_STATIC_INIT; |
| |
| DEFINE_RUN_ONCE_STATIC(ossl_init_load_crypto_strings) |
| { |
| int ret = 1; |
| /* |
| * OPENSSL_NO_AUTOERRINIT is provided here to prevent at compile time |
| * pulling in all the error strings during static linking |
| */ |
| #if !defined(OPENSSL_NO_ERR) && !defined(OPENSSL_NO_AUTOERRINIT) |
| void *err; |
| |
| if (!err_shelve_state(&err)) |
| return 0; |
| |
| OSSL_TRACE(INIT, "ossl_err_load_crypto_strings()\n"); |
| ret = ossl_err_load_crypto_strings(); |
| |
| err_unshelve_state(err); |
| #endif |
| return ret; |
| } |
| |
| DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_load_crypto_strings, |
| ossl_init_load_crypto_strings) |
| { |
| /* Do nothing in this case */ |
| return 1; |
| } |
| |
| static CRYPTO_ONCE ssl_strings = CRYPTO_ONCE_STATIC_INIT; |
| |
| DEFINE_RUN_ONCE_STATIC(ossl_init_load_ssl_strings) |
| { |
| /* |
| * OPENSSL_NO_AUTOERRINIT is provided here to prevent at compile time |
| * pulling in all the error strings during static linking |
| */ |
| #if !defined(OPENSSL_NO_ERR) && !defined(OPENSSL_NO_AUTOERRINIT) |
| OSSL_TRACE(INIT, "ossl_init_load_ssl_strings: ossl_err_load_SSL_strings()\n"); |
| ossl_err_load_SSL_strings(); |
| #endif |
| return 1; |
| } |
| |
| DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_load_ssl_strings, |
| ossl_init_load_ssl_strings) |
| { |
| /* Do nothing in this case */ |
| return 1; |
| } |
| |
| static CRYPTO_ONCE add_all_ciphers = CRYPTO_ONCE_STATIC_INIT; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_add_all_ciphers) |
| { |
| /* |
| * OPENSSL_NO_AUTOALGINIT is provided here to prevent at compile time |
| * pulling in all the ciphers during static linking |
| */ |
| #ifndef OPENSSL_NO_AUTOALGINIT |
| OSSL_TRACE(INIT, "openssl_add_all_ciphers_int()\n"); |
| openssl_add_all_ciphers_int(); |
| #endif |
| return 1; |
| } |
| |
| DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_add_all_ciphers, |
| ossl_init_add_all_ciphers) |
| { |
| /* Do nothing */ |
| return 1; |
| } |
| |
| static CRYPTO_ONCE add_all_digests = CRYPTO_ONCE_STATIC_INIT; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_add_all_digests) |
| { |
| /* |
| * OPENSSL_NO_AUTOALGINIT is provided here to prevent at compile time |
| * pulling in all the ciphers during static linking |
| */ |
| #ifndef OPENSSL_NO_AUTOALGINIT |
| OSSL_TRACE(INIT, "openssl_add_all_digests()\n"); |
| openssl_add_all_digests_int(); |
| #endif |
| return 1; |
| } |
| |
| DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_add_all_digests, |
| ossl_init_add_all_digests) |
| { |
| /* Do nothing */ |
| return 1; |
| } |
| |
| static CRYPTO_ONCE config = CRYPTO_ONCE_STATIC_INIT; |
| static const OPENSSL_INIT_SETTINGS *conf_settings = NULL; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_config) |
| { |
| int ret = ossl_config_int(NULL); |
| |
| return ret; |
| } |
| DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_config_settings, ossl_init_config) |
| { |
| int ret = ossl_config_int(conf_settings); |
| |
| return ret; |
| } |
| DEFINE_RUN_ONCE_STATIC_ALT(ossl_init_no_config, ossl_init_config) |
| { |
| OSSL_TRACE(INIT, "ossl_no_config_int()\n"); |
| ossl_no_config_int(); |
| |
| return 1; |
| } |
| |
| static CRYPTO_ONCE async = CRYPTO_ONCE_STATIC_INIT; |
| static int async_inited = 0; |
| DEFINE_RUN_ONCE_STATIC(ossl_init_async) |
| { |
| OSSL_TRACE(INIT, "async_init()\n"); |
| if (!async_init()) |
| return 0; |
| async_inited = 1; |
| return 1; |
| } |
| |
| /* |
| * Global cleanup function. This is optional, and not strictly |
| * necessary to run. Operating systems have successfully been |
| * recovering memory from exiting tasks since the days when I amused |
| * myself by drawing dinosaurs in crayon on used punch cards. |
| * |
| * If we have destructor support, this function is installed and |
| * always run as a global destructor. It only does anything if |
| * someone has called OPENSSL_cleanup() before it is run. |
| * |
| * This ensures that we do the actual cleanup requested by an |
| * OPENSSL_cleanup() only after subordinate library destructors which |
| * may call into OpenSSL have run. |
| * |
| * If we do not have destructor support, then this function is not |
| * normally run, and OPENSSL_cleanup() will do nothing. If we are |
| * compiled with the compile time define of |
| * DO_NOT_SKIP_OPENSSL_CLEANUP, this function will be called |
| * directly from OPENSSL_cleanup() so that cleanup will happen |
| * when OPENSSL_cleanup() is called. |
| */ |
| void ossl_cleanup_destructor(void) |
| { |
| /* |
| * At some point we should consider looking at this function with a view to |
| * moving most/all of this into onfree handlers in OSSL_LIB_CTX. |
| */ |
| |
| /* If we've not been inited then no need to deinit */ |
| if (!base_inited) |
| return; |
| |
| /* If we have not been told to clean up, and we are invoked, return */ |
| if (!do_global_cleanup) |
| return; |
| |
| /* Might be explicitly called */ |
| if (stopped) |
| return; |
| stopped = 1; |
| |
| /* |
| * Thread stop may not get automatically called by the thread library for |
| * the very last thread in some situations, so call it directly. |
| */ |
| OPENSSL_thread_stop(); |
| |
| CRYPTO_THREAD_lock_free(optsdone_lock); |
| optsdone_lock = NULL; |
| CRYPTO_THREAD_lock_free(init_lock); |
| init_lock = NULL; |
| |
| CRYPTO_THREAD_cleanup_local(&in_init_config_local); |
| |
| /* |
| * We assume we are single-threaded for this function, i.e. no race |
| * conditions for the various "*_inited" vars below. |
| */ |
| |
| #ifndef OPENSSL_NO_COMP |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_comp_zlib_cleanup()\n"); |
| ossl_comp_zlib_cleanup(); |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_comp_brotli_cleanup()\n"); |
| ossl_comp_brotli_cleanup(); |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_comp_zstd_cleanup()\n"); |
| ossl_comp_zstd_cleanup(); |
| #endif |
| |
| if (async_inited) { |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: async_deinit()\n"); |
| async_deinit(); |
| } |
| |
| /* |
| * Note that cleanup order is important: |
| * - ossl_rand_cleanup_int could call an ENGINE's RAND cleanup function so |
| * must be called before engine_cleanup_int() |
| * - ENGINEs use CRYPTO_EX_DATA and therefore, must be cleaned up |
| * before the ex data handlers are wiped during default ossl_lib_ctx deinit. |
| * - ossl_config_modules_free() can end up in ENGINE code so must be called |
| * before engine_cleanup_int() |
| * - ENGINEs and additional EVP algorithms might use added OIDs names so |
| * ossl_obj_cleanup_int() must be called last |
| */ |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_rand_cleanup_int()\n"); |
| ossl_rand_cleanup_int(); |
| |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_config_modules_free()\n"); |
| ossl_config_modules_free(); |
| |
| #ifndef OPENSSL_NO_DEPRECATED_3_0 |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_store_cleanup_int()\n"); |
| ossl_store_cleanup_int(); |
| #endif |
| |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_lib_ctx_default_deinit()\n"); |
| ossl_lib_ctx_default_deinit(); |
| |
| ossl_cleanup_thread(); |
| |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: bio_cleanup()\n"); |
| bio_cleanup(); |
| |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: evp_cleanup_int()\n"); |
| evp_cleanup_int(); |
| |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_obj_cleanup_int()\n"); |
| ossl_obj_cleanup_int(); |
| |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: err_int()\n"); |
| err_cleanup(); |
| |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: CRYPTO_secure_malloc_done()\n"); |
| CRYPTO_secure_malloc_done(); |
| |
| #ifndef OPENSSL_NO_CMP |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: OSSL_CMP_log_close()\n"); |
| OSSL_CMP_log_close(); |
| #endif |
| |
| OSSL_TRACE(INIT, "OPENSSL_cleanup: ossl_trace_cleanup()\n"); |
| ossl_trace_cleanup(); |
| |
| #ifdef S390X_MOD_EXP |
| OPENSSL_s390x_cleanup(); |
| #endif |
| |
| base_inited = 0; |
| } |
| |
| /* |
| * If this function is called with a non NULL settings value then it must be |
| * called prior to any threads making calls to any OpenSSL functions, |
| * i.e. passing a non-null settings value is assumed to be single-threaded. |
| */ |
| int OPENSSL_init_crypto(uint64_t opts, const OPENSSL_INIT_SETTINGS *settings) |
| { |
| uint64_t tmp; |
| int aloaddone = 0; |
| |
| /* Applications depend on 0 being returned when cleanup was already done */ |
| if (ossl_unlikely(stopped)) { |
| if (!(opts & OPENSSL_INIT_BASE_ONLY)) |
| ERR_raise(ERR_LIB_CRYPTO, ERR_R_INIT_FAIL); |
| return 0; |
| } |
| |
| /* |
| * We ignore failures from this function. It is probably because we are |
| * on a platform that doesn't support lockless atomic loads (we may not |
| * have created optsdone_lock yet so we can't use it). This is just an |
| * optimisation to skip the full checks in this function if we don't need |
| * to, so we carry on regardless in the event of failure. |
| * |
| * There could be a race here with other threads, so that optsdone has not |
| * been updated yet, even though the options have in fact been initialised. |
| * This doesn't matter - it just means we will run the full function |
| * unnecessarily - but all the critical code is contained in RUN_ONCE |
| * functions anyway so we are safe. |
| */ |
| if (ossl_likely(CRYPTO_atomic_load(&optsdone, &tmp, NULL))) { |
| if ((tmp & opts) == opts) |
| return 1; |
| aloaddone = 1; |
| } |
| |
| /* |
| * At some point we should look at this function with a view to moving |
| * most/all of this into OSSL_LIB_CTX. |
| * |
| * When the caller specifies OPENSSL_INIT_BASE_ONLY, that should be the |
| * *only* option specified. With that option we return immediately after |
| * doing the requested limited initialization. |
| * |
| * If we remain the only caller of err_shelve_state() the recursion should |
| * perhaps be removed, but if in doubt, it can be left in place. |
| */ |
| if (ossl_unlikely(!RUN_ONCE(&base, ossl_init_base))) |
| return 0; |
| |
| if (opts & OPENSSL_INIT_BASE_ONLY) |
| return 1; |
| |
| /* |
| * optsdone_lock should definitely be set up now, so we can now repeat the |
| * same check from above but be sure that it will work even on platforms |
| * without lockless CRYPTO_atomic_load |
| */ |
| if (!aloaddone) { |
| if (!CRYPTO_atomic_load(&optsdone, &tmp, optsdone_lock)) |
| return 0; |
| if ((tmp & opts) == opts) |
| return 1; |
| } |
| |
| if ((opts & OPENSSL_INIT_NO_LOAD_CRYPTO_STRINGS) |
| && !RUN_ONCE_ALT(&load_crypto_strings, |
| ossl_init_no_load_crypto_strings, |
| ossl_init_load_crypto_strings)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_LOAD_CRYPTO_STRINGS) |
| && !RUN_ONCE(&load_crypto_strings, ossl_init_load_crypto_strings)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_NO_LOAD_SSL_STRINGS) |
| && !RUN_ONCE_ALT(&ssl_strings, ossl_init_no_load_ssl_strings, |
| ossl_init_load_ssl_strings)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_LOAD_SSL_STRINGS) |
| && !RUN_ONCE(&ssl_strings, ossl_init_load_ssl_strings)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_NO_ADD_ALL_CIPHERS) |
| && !RUN_ONCE_ALT(&add_all_ciphers, ossl_init_no_add_all_ciphers, |
| ossl_init_add_all_ciphers)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_ADD_ALL_CIPHERS) |
| && !RUN_ONCE(&add_all_ciphers, ossl_init_add_all_ciphers)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_NO_ADD_ALL_DIGESTS) |
| && !RUN_ONCE_ALT(&add_all_digests, ossl_init_no_add_all_digests, |
| ossl_init_add_all_digests)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_ADD_ALL_DIGESTS) |
| && !RUN_ONCE(&add_all_digests, ossl_init_add_all_digests)) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_ATFORK) |
| && !openssl_init_fork_handlers()) |
| return 0; |
| |
| if ((opts & OPENSSL_INIT_NO_LOAD_CONFIG) |
| && !RUN_ONCE_ALT(&config, ossl_init_no_config, ossl_init_config)) |
| return 0; |
| |
| if (opts & OPENSSL_INIT_LOAD_CONFIG) { |
| int loading = CRYPTO_THREAD_get_local(&in_init_config_local) != NULL; |
| |
| /* If called recursively from OBJ_ calls, just skip it. */ |
| if (!loading) { |
| int ret; |
| |
| if (!CRYPTO_THREAD_set_local(&in_init_config_local, (void *)-1)) |
| return 0; |
| if (settings == NULL) { |
| ret = RUN_ONCE(&config, ossl_init_config); |
| } else { |
| if (!CRYPTO_THREAD_write_lock(init_lock)) |
| return 0; |
| conf_settings = settings; |
| ret = RUN_ONCE_ALT(&config, ossl_init_config_settings, |
| ossl_init_config); |
| conf_settings = NULL; |
| CRYPTO_THREAD_unlock(init_lock); |
| } |
| |
| if (ret <= 0) |
| return 0; |
| } |
| } |
| |
| if ((opts & OPENSSL_INIT_ASYNC) |
| && !RUN_ONCE(&async, ossl_init_async)) |
| return 0; |
| |
| if (!CRYPTO_atomic_or(&optsdone, opts, &tmp, optsdone_lock)) |
| return 0; |
| |
| return 1; |
| } |
| |
| void OPENSSL_cleanup(void) |
| { |
| do_global_cleanup = 1; |
| #if defined(OSSL_CLEANUP_USING_DESTRUCTOR) |
| return; |
| #endif /* defined(OSSL_CLEANUP_USING_DESTRUCTOR) */ |
| |
| #if defined(DO_NOT_SKIP_OPENSSL_CLEANUP) |
| ossl_cleanup_destructor(); |
| #endif /* defined(DO_NOT_SKIP_OPENSSL_CLEANUP) */ |
| } |